1 #Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
26 datadir = $(prefix)/lib
27 mandir = $(prefix)/man
28 man1dir = $(mandir)/man1
29 man2dir = $(mandir)/man2
30 man3dir = $(mandir)/man3
31 man4dir = $(mandir)/man4
32 man5dir = $(mandir)/man5
33 man6dir = $(mandir)/man6
34 man7dir = $(mandir)/man7
35 man8dir = $(mandir)/man8
36 man9dir = $(mandir)/man9
37 infodir = $(prefix)/info
38 includedir = $(prefix)/include
39 docdir
= $(datadir)/doc
44 INSTALL_PROGRAM
= $(INSTALL
)
45 INSTALL_DATA
= $(INSTALL
)
51 # Flags that describe where you can find the termcap library.
52 # This can be overridden in the host Makefile fragment file.
55 # System V: If you compile gdb with a compiler which uses the coff
56 # encapsulation feature (this is a function of the compiler used, NOT
57 # of the m-?.h file selected by config.gdb), you must make sure that
58 # the GNU nm is the one that is used by munch.
60 # If you are compiling with GCC, make sure that either 1) You use the
61 # -traditional flag, or 2) You have the fixed include files where GCC
62 # can reach them. Otherwise the ioctl calls in inflow.c
63 # will be incorrectly compiled. The "fixincludes" script in the gcc
64 # distribution will fix your include files up.
69 # Directory containing source files. Don't clean up the spacing,
70 # this exact string is matched for by the "configure" script.
73 # It is also possible that you will need to add -I/usr/include/sys to the
74 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
75 # is where it should be according to Posix).
80 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
81 # Berkeley/Sun don't have quite enough.
85 # where to find texinfo; GDB dist should include a recent one
86 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
88 # where to find makeinfo, preferably one designed for texinfo-2
91 # Set this up with gcc if you have gnu ld and the loader will print out
92 # line numbers for undefinded refs.
96 # Where is the "include" directory? Traditionally ../include or ./include
97 INCLUDE_DIR
= ${srcdir}/..
/include
98 INCLUDE_DEP
= $$(INCLUDE_DIR
)
100 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
101 # or ./mmalloc (When we want the binary library built from it, we use
102 # ${MMALLOC_DIR}${subdir}.)
103 # Note that mmalloc can still be used on systems without mmap().
104 # To use your system malloc, comment out the following defines.
105 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
106 MMALLOC_DEP
= $$(MMALLOC_DIR
)
107 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
108 # To use your system malloc, uncomment MMALLOC_DISABLE.
109 #MMALLOC_DISABLE = -DNO_MMALLOC
110 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
111 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
112 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
114 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
115 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
116 BFD_DIR
= ${srcdir}/..
/bfd
117 BFD_DEP
= $$(BFD_DIR
)
118 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
120 # Where is the source dir for the READLINE library? Traditionally in .. or .
121 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
122 READLINE_DIR
= ${srcdir}/..
/readline
123 READLINE_DEP
= $$(READLINE_DIR
)
124 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
126 # All the includes used for CFLAGS and for lint.
127 # -I. for config files.
128 # -I${srcdir} possibly for regex.h also.
129 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
)
131 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
132 # from the config/ directory.
133 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
134 #PROFILE_CFLAGS = -pg
136 # CFLAGS is specifically reserved for setting from the command line
137 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
139 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
140 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
141 # None of the things in CFLAGS will do any harm, and on some systems
142 # (e.g. SunOS4) it is important to use the MH_CFLAGS.
145 # Where is the "-liberty" library, containing getopt and obstack?
146 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
147 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
149 # Where is the "-lopcodes" library, with (some of) the opcode tables and
151 OPCODES
= .
/..
/opcodes
${subdir}/libopcodes.a
153 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
154 # If your sysyem is missing alloca(), or, more likely, it's there but
155 # it doesn't work, define ALLOCA & ALLOCA1 too.
157 # Libraries and corresponding dependencies for compiling gdb.
158 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
159 # TERMCAP comes after readline, since readline depends on it.
160 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
161 ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
162 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
163 ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
165 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
166 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
172 LINTFLAGS
= -I
${BFD_DIR}
174 # Host and target-dependent makefile fragments come in here.
176 # End of host and target-dependent makefile fragments
179 "against=$(against)" \
181 "AR_FLAGS=$(AR_FLAGS)" \
185 "MAKEINFO=$(MAKEINFO)" \
186 "INSTALL=$(INSTALL)" \
187 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
188 "INSTALL_DATA=$(INSTALL_DATA)" \
191 # Source files in the main directory.
192 # Files which are included via a config/* Makefile fragment
193 # should *not* be specified here; they're in "ALLDEPFILES".
195 blockframe.c breakpoint.c command.c core.c demangle.c \
196 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
197 main.c printcmd.c gdbtypes.c \
198 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
199 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
200 mem-break.c target.c inftarg.c \
201 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
202 ieee-float.c language.c parse.c buildsym.c objfiles.c \
203 minsyms.c mipsread.c maint.c
205 # Source files in subdirectories (which will be handled separately by
207 # Files which are included via a config/* Makefile fragment
208 # should *not* be specified here; they're in "ALLDEPFILES".
210 ${srcdir}/vx-share
/dbgRpcLib.h \
211 ${srcdir}/vx-share
/ptrace.h \
212 ${srcdir}/vx-share
/reg.h \
213 ${srcdir}/vx-share
/vxTypes.h \
214 ${srcdir}/vx-share
/vxWorks.h \
215 ${srcdir}/vx-share
/wait.h \
216 ${srcdir}/vx-share
/xdr_ld.h \
217 ${srcdir}/vx-share
/xdr_ptrace.h \
218 ${srcdir}/vx-share
/xdr_rdb.h \
219 ${srcdir}/vx-share
/xdr_regs.h \
220 ${srcdir}/nindy-share
/b.out.h \
221 ${srcdir}/nindy-share
/block_io.h \
222 ${srcdir}/nindy-share
/coff.h \
223 ${srcdir}/nindy-share
/demux.h \
224 ${srcdir}/nindy-share
/env.h \
225 ${srcdir}/nindy-share
/stop.h \
226 ${srcdir}/nindy-share
/ttycntl.h
228 # Non-source files in subdirs, that should go into gdb.tar.Z.
230 ${srcdir}/nindy-share
/Makefile \
231 ${srcdir}/nindy-share
/VERSION \
232 ${srcdir}/nindy-share
/README \
233 ${srcdir}/vx-share
/README
235 # All source files that go into linking GDB, except config-specified files.
236 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
238 # All source files that lint should look at
239 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
241 # Any additional files specified on these lines should also be added to
242 # the OTHERS = definition below, so they go in the tar files.
243 SFILES_STAND
= $(SFILES
) standalone.c
244 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
246 # Header files that are not named in config/* Makefile fragments go here.
247 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h \
248 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
249 gdb-stabs.h ieee-float.h inferior.h language.h \
250 minimon.h objfiles.h parser-defs.h partial-stab.h \
251 serial.h signals.h solib.h symfile.h symtab.h stabsread.h \
252 target.h terminal.h xcoffsolib.h value.h \
253 tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \
254 xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h
256 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
258 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
259 POSSLIBS
= $(POSSLIBS_MAINDIR
)
261 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
263 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
264 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
265 README TODO TAGS NEWS Projects \
266 .gdbinit COPYING
$(YYFILES
) \
267 copying.c Convex.notes copying.awk \
268 saber.suppress standalone.c stuff.c kdb-start.c \
271 # Subdirectories of gdb, which should be included in their entirety in
273 TARDIRS
= doc
# tests
275 # GDB "info" files, which should be included in their entirety
276 INFOFILES
= gdb.
info*
278 DEPFILES
= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
280 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
281 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
282 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
283 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
284 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
286 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
287 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
288 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
289 command.o utils.o expprint.o environ.o version.o gdbtypes.o \
290 copying.o
$(DEPFILES
) mem-break.o target.o \
291 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
292 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
293 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
296 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
298 TSOBS
= core.o inflow.o
300 NTSOBS
= standalone.o
302 TSSTART
= /lib
/crt0.o
304 NTSSTART
= kdb-start.o
308 # For now, shortcut the "configure GDB for fewer languages" stuff.
309 YYFILES
= c-exp.tab.c m2-exp.tab.c
310 YYOBJ
= c-exp.tab.o m2-exp.tab.o
312 # Prevent Sun make from putting in the machine type. Setting
313 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
315 ${CC} -c
${INTERNAL_CFLAGS} $<
318 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
321 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
323 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
325 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
328 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
329 pack gdb.t
; rm -f gdb.t
333 -parent
=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
334 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
335 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; fi
336 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
337 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
338 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; fi
339 -n
=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
340 $(INSTALL_PROGRAM
) gdb
$(bindir)/$$n; \
341 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$$n.1
343 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
345 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
346 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
348 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
349 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
350 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
352 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
353 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
354 #load ./init.c $(SFILES)
355 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
356 #unload ${srcdir}/nindy-share/[A-Z]*
357 #load c-exp.tab.c m2-exp.tab.c
358 #load copying.c version.c
359 #load ../opcodes/libopcodes.a
360 #load ../libiberty/libiberty.a
361 #load ../bfd/libbfd.a
362 #load ../readline/libreadline.a
363 #load ../mmalloc/libmmalloc.a
365 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
366 echo
"Load .c corresponding to:" $(DEPFILES
)
369 # This is useful when debugging GDB, because some Unix's don't let you run GDB
370 # on itself without copying the executable. So "make gdb1" will make
371 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
372 # Removing gdb1 before the copy is the right thing if gdb1 is open
373 # in another process.
378 # This is a remote stub which runs under unix and starts up an
379 # inferior process. This is at least useful for debugging GDB's
383 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
384 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
386 # Support for building Makefile out of configured pieces, automatically
387 # generated dependencies, etc. alldeps.mak is a file that contains
388 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
389 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
390 # contents of the config subdirectory.
392 alldeps.mak
: ${srcdir}/config
393 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
394 for i in
`ls -d ${srcdir}/config/*.m[ht]` ; do \
395 echo
$$i >>allconfig.tmp
; \
397 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
398 || $$1 == "NATDEPFILES" { \
399 for (i = 2; i <= NF; i++) \
400 print $$i >> "alldeps.tmp" ; \
402 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE" { \
403 print $$2 >> "allparam.tmp" }' ; \
405 sort <alldeps.tmp | uniq | \
406 sed
-e
's/arm-convert.o/arm-convert.s/' \
407 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
408 -e
's!^nindy.o!nindy-share/nindy.c!' \
409 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
410 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
411 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
412 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
413 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
414 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
417 echo
'# Start of "alldeps.mak" definitions' \
419 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
421 grep
-v
/ alldeps2.tmp | \
422 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
423 NR == 0 {printf $$0;} \
424 NR != 0 {printf "\\\n" $$0} \
425 END {printf "\n\n"}' >>alldeps.mak
;
426 grep
/ alldeps2.tmp | \
427 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
428 NR == 0 {printf $$0;} \
429 NR != 0 {printf "\\\n" $$0} \
430 END {printf "\n\n"}' >>alldeps.mak
;
431 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
432 NR == 0 {printf $$0;} \
433 NR != 0 {printf "\\\n" $$0} \
434 END {printf "\n\n"}' >>alldeps.mak
;
435 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
436 NR == 0 {printf $$0;} \
437 NR != 0 {printf "\\\n" $$0} \
438 END {printf "\n\n"}' >>alldeps.mak
;
439 echo
'# End of "alldeps.mak" definitions' \
441 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
443 # The sed script makes everything which depends on {x,t}m.h depend on
444 # config.status as well, in case someone reconfigures gdb out from
445 # under an already compiled gdb.
446 depend
: $(SOURCES
) Makefile.in
447 @echo Ignore errors about non-existent system-supplied
include files
448 @echo for systems other than the one you are using.
449 @echo Also ignore parse errors in valops.c
, and any errors in
452 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
453 -I
${READLINE_DIR} $(INCLUDE_CFLAGS
) \
454 `ls $(SOURCES) | grep -v '\.[hy]$$' | \
456 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
457 # for xm.h and tm.h. This allows the same "depend" file to be used
458 # by the various subdirectories.
459 if
[ "${srcdir}" = "." ] ; then \
461 -e
's; ./xm.h; xm.h;g' \
462 -e
's; ./tm.h; tm.h;g' \
463 -e
's; \./; $${srcdir}/;g' \
464 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
465 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
468 mv depend.tm2 depend.tmp
; \
471 -e
's; [xt]m.h;& config.status;g' \
472 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
473 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
474 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
475 -e
's; ./xm.h; xm.h config.status;g' \
476 -e
's; ./tm.h; tm.h config.status;g' \
481 @echo
"You must configure gdb. Look at the README file for details."
484 # This checks the configure.in file versus the config/ directory.
485 config-check
: config-check-hosts config-check-targets
487 grep gdb_host
= ${srcdir}/configure.in | \
488 sed
-e
's/.*gdb_host=//' -e
's/ ;;$$/.mh/' |
sort -u
>HOSTconf.o
489 (cd
${srcdir}/config
; ls
*.mh
) >HOSTdir.o
490 diff
-u HOSTconf.o HOSTdir.o
492 config-check-targets
:
493 grep gdb_target
= ${srcdir}/configure.in | \
494 sed
-e
's/.*gdb_target=//' -e
's/ ;;$$/.mh/' |
sort -u
>TARGconf.o
495 (cd
${srcdir}/config
; ls
*.mt
) >TARGdir.o
496 diff
-u HOSTconf.o HOSTdir.o
498 # These are not generated by "make depend" because they only are there
500 # But these rules don't do what we want; we want to hack the foo.o: tm.h
501 # dependency to do the right thing.
502 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
503 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
504 xm-news1000.h
: xm-news.h
505 xm-i386-sv32.h
: xm-i386.h
506 tm-i386gas.h
: tm-i386.h
507 xm-sun4os4.h
: xm-sparc.h
508 tm-sun4os4.h
: tm-sparc.h
509 xm-vaxult.h
: xm-vax.h
510 xm-vaxbsd.h
: xm-vax.h
512 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
514 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
515 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
516 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
519 # Put the proper machine-specific files first.
520 # createtags will edit the .o in DEPFILES into .c
522 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} ${NAT_FILE} \
523 $(DEPFILES
) ${TAGFILES}
526 # Making distributions of GDB and friends.
528 # Make a directory `proto-gdb.dir' that contains an image of the GDB
529 # directory of the distribution, built up with symlinks.
530 make-proto-gdb.
dir: force_update
531 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
532 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
534 # Make a tar file containing the GDB directory of the distribution.
535 gdb.
tar.Z
: force_update
536 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
537 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
539 # Update the "alldeps.mak" file in a source directory.
540 update-alldeps
: force_update
543 $(MAKE
) $(MFLAGS
) alldeps.mak
545 # Update the "depend" and "alldeps.mak" files in a source directory.
546 # We update alldeps.mak first, since it is used to generate the list
547 # of files to be checked for dependencies.
548 update-depend
: update-alldeps force_update
551 $(MAKE
) $(MFLAGS
) depend
553 # Set up the GDB source directory for distribution, by building all files that
554 # are products of other files.
555 setup-to-dist
: update-depend force_update
557 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
558 $(MAKE
) $(MFLAGS
) gdb.
info
559 $(MAKE
) $(MFLAGS
) refcard.ps
561 # Build a tar file from a proto-gdb.dir.
562 gdb-
$(VERSION
).
tar.Z
: force_update
563 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
564 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
565 ln
-s proto-gdb.
dir $(DIST
)
566 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
567 rm -rf
$(DIST
) proto-gdb.
dir
569 # Build a proto-gdb.dir after GDB has been set up for distribution.
570 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
571 # built in the setup-to-dist process, since it defines things like ALLCONFIG
572 # and ALLDEPFILES, that we need.
573 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
576 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
577 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
578 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
580 ln
-s ..
/..
/$$i/* .
; \
581 rm -rf SCCS CVS.adm RCS config.status
; \
582 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
; done
583 mkdir proto-gdb.
dir/config
584 cd proto-gdb.
dir/config
; \
585 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
586 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
587 cd proto-gdb.
dir/config
; \
588 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
589 do ln
-s ..
/..
/$$i ..
/$$i ; done
590 chmod og
=u
`find . -print`
593 rm -f
*.o
${ADD_FILES} *~
594 rm -f init.c version.c
595 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
597 @
$(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
599 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
600 rm -f tm.h xm.h config.status
601 rm -f y.output
yacc.acts
yacc.tmp
602 rm -f
${TESTS} Makefile depend
603 @
$(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
606 rm -f c-exp.tab.c m2-exp.tab.c TAGS
607 rm -f tm.h xm.h config.status
608 rm -f Makefile depend
609 @
$(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
611 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
614 @for i in
$(DODIRS
); do \
615 if
[ -d .
/$$i ] ; then \
617 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
622 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
623 $(SHELL
) .
/config.status
628 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
629 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
630 ( cd .
/doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
) )
631 mv .
/doc
/refcard.
dvi .
633 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
634 refcard.ps
: $(srcdir)/doc
/refcard.
tex
635 ( cd .
/doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
) )
636 mv .
/doc
/refcard.ps .
638 # GDB MANUAL: TeX dvi file
639 gdb.
dvi: .
/doc
/gdb-all.texi
640 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi $(FLAGS_TO_PASS
) )
643 # GDB MANUAL: info file
644 gdb.
info: .
/doc
/gdb-all.texi
645 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
info $(FLAGS_TO_PASS
) )
649 (cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
$(FLAGS_TO_PASS
) )
651 # Make copying.c from COPYING
652 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
653 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
656 echo
'char *version = "$(VERSION)";' >version.c
658 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
659 # in srcdir, then compiled in target dir to c-exp.tab.o.
660 # Remove bogus decls for malloc/realloc/free which conflict with everything
662 c-exp.tab.o
: c-exp.tab.c
663 c-exp.tab.c
: $(srcdir)/c-exp.y
664 @echo
'Expect 4 shift/reduce conflicts.'
665 ${YACC} $(srcdir)/c-exp.y
666 -sed
-e
'/extern.*malloc/d' \
667 -e
'/extern.*realloc/d' \
668 -e
'/extern.*free/d' \
669 < y.tab.c
> c-exp.tab.c
672 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
673 # in srcdir, then compiled in target dir to m2-exp.tab.o.
674 m2-exp.tab.o
: m2-exp.tab.c
675 m2-exp.tab.c
: $(srcdir)/m2-exp.y
676 ${YACC} $(srcdir)/m2-exp.y
677 -sed
-e
'/extern.*malloc/d' \
678 -e
'/extern.*realloc/d' \
679 -e
'/extern.*free/d' \
680 < y.tab.c
> m2-exp.tab.c
684 main.o
: ${srcdir}/main.c
685 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
687 # The symbol-file readers have dependencies on BFD header files.
688 dbxread.o
: ${srcdir}/dbxread.c
689 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
691 coffread.o
: ${srcdir}/coffread.c
692 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
694 mipsread.o
: ${srcdir}/mipsread.c
695 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
697 elfread.o
: ${srcdir}/elfread.c
698 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
700 dwarfread.o
: ${srcdir}/dwarfread.c
701 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
703 stabsread.o
: ${srcdir}/stabsread.c
704 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
706 xcoffread.o
: ${srcdir}/xcoffread.c
707 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
709 xcoffexec.o
: ${srcdir}/xcoffexec.c
710 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
712 # Drag in the files that are in another directory.
714 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
715 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
717 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
718 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
720 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
721 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
723 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
724 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
726 nindy.o
: ${srcdir}/nindy-share
/nindy.c
727 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/nindy.c
729 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
730 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
732 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
733 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
735 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
736 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
739 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
740 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
743 cxref -I. $(SFILES) >gdb.cxref
747 # GNU Make has an annoying habit of putting *all* the Makefile variables
748 # into the environment, unless you include this target as a circumvention.
749 # Rumor is that this will be fixed (and this target can be removed)
753 # This is the end of "Makefile.in". When built into "Makefile"
754 # by the configure script, two things are added below this point:
755 # alldeps.mak -- defintions of all files that are used in
756 # host- or target-dependent configurations
757 # depend -- what .o files depend on what .c and .h files,
758 # for all configurations.