1 # Copyright (C) 1989-2015 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 install_sh
= @install_sh@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
62 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
63 INSTALL_DATA
= @INSTALL_DATA@
82 # The name of the compiler to use.
85 # If you are compiling with GCC, make sure that either 1) You have the
86 # fixed include files where GCC can reach them, or 2) You use the
87 # -traditional flag. Otherwise the ioctl calls in inflow.c
88 # will be incorrectly compiled. The "fixincludes" script in the gcc
89 # distribution will fix your include files up.
93 # Dependency tracking information.
96 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
98 # Note that these are overridden by GNU make-specific code below if
99 # GNU make is used. The overrides implement dependency tracking.
100 COMPILE.pre
= $(COMPILER
)
101 COMPILE.post
= -c
-o
$@
102 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
105 # Directory containing source files.
111 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
112 # not defined, but ada-lex.c is present, compilation will continue,
113 # possibly with a warning.
116 YLWRAP
= $(srcdir)/..
/ylwrap
118 # where to find makeinfo, preferably one designed for texinfo-2
119 MAKEINFO
= @MAKEINFO@
120 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
121 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
122 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
124 MAKEHTML
= $(MAKEINFO_CMD
) --html
127 # Set this up with gcc if you have gnu ld and the loader will print out
128 # line numbers for undefined references.
132 # Where is our "include" directory? Typically $(srcdir)/../include.
133 # This is essentially the header file directory for the library
134 # routines in libiberty.
135 INCLUDE_DIR
= $(srcdir)/..
/include
136 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
138 # Where is the "-liberty" library? Typically in ../libiberty.
139 LIBIBERTY
= ..
/libiberty
/libiberty.a
141 # Where is the BFD library? Typically in ../bfd.
143 BFD
= $(BFD_DIR
)/libbfd.a
144 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
145 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
147 # Where is the decnumber library? Typically in ../libdecnumber.
148 LIBDECNUMBER_DIR
= ..
/libdecnumber
149 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
150 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
151 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
153 # Where is the READLINE library? Typically in ../readline.
154 READLINE_DIR
= ..
/readline
155 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
156 READLINE
= @READLINE@
157 READLINE_DEPS
= @READLINE_DEPS@
158 READLINE_CFLAGS
= @READLINE_CFLAGS@
160 # Where is expat? This will be empty if expat was not available.
161 LIBEXPAT
= @LIBEXPAT@
163 # Where is lzma? This will be empty if lzma was not available.
166 # Where is libbabeltrace? This will be empty if lbabeltrace was not
168 LIBBABELTRACE
= @LIBBABELTRACE@
170 WARN_CFLAGS
= @WARN_CFLAGS@
171 WERROR_CFLAGS
= @WERROR_CFLAGS@
172 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
173 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
175 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
176 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
177 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
178 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
180 RDYNAMIC
= @RDYNAMIC@
182 # Where is the INTL library? Typically in ../intl.
184 INTL_DEPS
= @LIBINTL_DEP@
185 INTL_CFLAGS
= @INCINTL@
187 # Did the user give us a --with-gdb-datadir option?
188 GDB_DATADIR
= @GDB_DATADIR@
190 # Flags to pass to gdb when invoked with "make run".
193 # Helper code from gnulib.
194 GNULIB_BUILDDIR
= build-gnulib
195 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
196 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
198 # Generated headers in the gnulib directory. These must be listed
199 # so that they are generated before other files are compiled.
200 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
203 # CLI sub directory definitons
207 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
209 cli-interp.o cli-utils.o
212 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
214 cli
/cli-interp.c cli
/cli-utils.c
220 # MI sub directory definitons
223 mi-out.o mi-console.o \
224 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
225 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
226 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
227 mi-cmd-info.o mi-interp.o \
228 mi-main.o mi-parse.o mi-getopt.o
230 mi
/mi-out.c mi
/mi-console.c \
231 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
232 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
233 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
234 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
235 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
241 # TUI sub directory definitions
278 tui
/tui-wingeneral.c \
279 tui
/tui-winsource.c \
288 # GCC Compile support sub-directory definitions
290 SUBDIR_GCC_COMPILE_OBS
= \
291 compile.o compile-c-symbols.o compile-c-types.o \
292 compile-object-load.o compile-object-run.o \
293 compile-loc2c.o compile-c-support.o
294 SUBDIR_GCC_COMPILE_SRCS
= \
296 compile
/compile-c-symbols.c \
297 compile
/compile-c-types.c \
298 compile
/compile-object-load.c \
299 compile
/compile-object-load.h \
300 compile
/compile-object-run.c \
301 compile
/compile-object-run.h \
302 compile
/compile-loc2c.c \
303 compile
/compile-c-support.c
305 # Guile sub directory definitons for guile support.
333 SUBDIR_GUILE_SRCS
= \
336 guile
/scm-auto-load.c \
338 guile
/scm-breakpoint.c \
341 guile
/scm-exception.c \
344 guile
/scm-iterator.c \
345 guile
/scm-lazy-string.c \
346 guile
/scm-objfile.c \
350 guile
/scm-pretty-print.c \
351 guile
/scm-progspace.c \
352 guile
/scm-safe-call.c \
360 SUBDIR_GUILE_LDFLAGS
=
364 # python sub directory definitons
366 SUBDIR_PYTHON_OBS
= \
380 py-finishbreakpoint.o \
390 py-newobjfileevent.o \
405 SUBDIR_PYTHON_SRCS
= \
408 python
/py-auto-load.c \
410 python
/py-bpevent.c \
411 python
/py-breakpoint.c \
413 python
/py-continueevent.c \
414 python
/py-xmethods.c \
416 python
/py-evtregistry.c \
418 python
/py-exitedevent.c \
419 python
/py-finishbreakpoint.c \
421 python
/py-framefilter.c \
422 python
/py-function.c \
423 python
/py-gdb-readline.c \
424 python
/py-inferior.c \
425 python
/py-infevents.c \
426 python
/py-infthread.c \
427 python
/py-lazy-string.c \
428 python
/py-linetable.c \
429 python
/py-newobjfileevent.c \
430 python
/py-objfile.c \
432 python
/py-prettyprint.c \
433 python
/py-progspace.c \
434 python
/py-signalevent.c \
435 python
/py-stopevent.c \
438 python
/py-threadevent.c \
444 SUBDIR_PYTHON_LDFLAGS
=
445 SUBDIR_PYTHON_CFLAGS
=
447 # Opcodes currently live in one of two places. Either they are in the
448 # opcode library, typically ../opcodes, or they are in a header file
450 # Where is the "-lopcodes" library, with (some of) the opcode tables and
452 OPCODES_DIR
= ..
/opcodes
453 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
454 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
455 # Where are the other opcode tables which only have header file
457 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
458 # Some source files like to use #include "opcodes/file.h"
459 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
461 # The simulator is usually nonexistent; targets that include one
462 # should set this to list all the .o or .a files to be linked in.
465 WIN32LIBS
= @WIN32LIBS@
467 # Tcl et al cflags and libraries
469 TCL_CFLAGS
= @TCL_INCLUDE@
470 GDBTKLIBS
= @GDBTKLIBS@
471 # Extra flags that the GDBTK files need:
472 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
475 TK_CFLAGS
= @TK_INCLUDE@
477 X11_CFLAGS
= @TK_XINCLUDES@
481 WIN32LDAPP
= @WIN32LDAPP@
484 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
485 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
487 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
489 # The version of gdbtk we're building. This should be kept
490 # in sync with GDBTK_VERSION and friends in gdbtk.h.
492 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
494 # Gdbtk requires an absolute path to the source directory or
495 # the testsuite won't run properly.
496 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
499 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
500 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
501 SUBDIR_GDBTK_SRCS
= \
502 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
503 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
504 gdbtk
/generic
/gdbtk-interp.c \
505 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
506 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
507 gdbtk
/generic
/gdbtk-main.c
508 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
509 SUBDIR_GDBTK_LDFLAGS
=
510 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
512 CONFIG_OBS
= @CONFIG_OBS@
513 CONFIG_SRCS
= @CONFIG_SRCS@
514 CONFIG_DEPS
= @CONFIG_DEPS@
515 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
516 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
517 CONFIG_ALL
= @CONFIG_ALL@
518 CONFIG_CLEAN
= @CONFIG_CLEAN@
519 CONFIG_INSTALL
= @CONFIG_INSTALL@
520 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
521 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
523 # -I. for config files.
524 # -I$(srcdir) for gdb internal headers.
525 # -I$(srcdir)/config for more generic config files.
527 # It is also possible that you will need to add -I/usr/include/sys if
528 # your system doesn't have fcntl.h in /usr/include (which is where it
529 # should be according to Posix).
531 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
532 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
534 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
535 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
537 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
539 # CFLAGS is specifically reserved for setting from the command line
540 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
543 # Set by configure, for e.g. expat. Python installations are such that
544 # C headers are included using their basename (for example, we #include
545 # <Python.h> rather than, say, <python/Python.h>). Since the file names
546 # are sometimes a little generic, we think that the risk of collision
547 # with other header files is high. If that happens, we try to mitigate
548 # a bit the consequences by putting the Python includes last in the list.
549 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
551 # Need to pass this to testsuite for "make check". Probably should be
552 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
553 # so "make check" has the same result no matter where it is run.
556 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
557 INTERNAL_CFLAGS_BASE
= \
558 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
559 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
560 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
561 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
562 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
563 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
565 # LDFLAGS is specifically reserved for setting from the command line
569 # Profiling options need to go here to work.
570 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
571 # and have it work; that's why CFLAGS is here.
572 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
573 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
575 # If your system is missing alloca(), or, more likely, it's there but
576 # it doesn't work, then refer to libiberty.
578 # Libraries and corresponding dependencies for compiling gdb.
579 # XM_CLIBS, defined in *config files, have host-dependent libs.
580 # LIBIBERTY appears twice on purpose.
581 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
582 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
583 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
584 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) \
585 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
586 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
587 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
589 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
590 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
595 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
596 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
602 # XML files to build in to GDB.
603 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
604 $(srcdir)/features
/library-list.dtd \
605 $(srcdir)/features
/library-list-aix.dtd \
606 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
607 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
608 $(srcdir)/features
/btrace.dtd
$(srcdir)/features
/btrace-conf.dtd
610 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
611 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
612 # etc., then there will be (as part of the C library or perhaps as
613 # part of libiberty) a POSIX interface. But at least for now the
614 # host-dependent makefile fragment might need to use something else
616 SER_HARDWIRE
= @SER_HARDWIRE@
618 # The `remote' debugging target is supported for most architectures,
619 # but not all (e.g. 960)
620 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
621 remote-notif.o ctf.o tracefile.o tracefile-tfile.o
623 # This is remote-sim.o if a simulator is to be linked in.
626 # Target-dependent object files.
627 TARGET_OBS
= @TARGET_OBS@
629 # All target-dependent objects files that require 64-bit CORE_ADDR
630 # (used with --enable-targets=all --enable-64-bit-bfd).
631 ALL_64_TARGET_OBS
= \
632 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
633 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
634 alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
635 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
636 amd64-linux-tdep.o amd64nbsd-tdep.o \
637 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
638 ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
640 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
641 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
643 # All other target-dependent objects files (used with --enable-targets=all).
645 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
646 armnbsd-tdep.o armobsd-tdep.o \
647 arm-tdep.o arm-wince-tdep.o \
649 bfin-linux-tdep.o bfin-tdep.o \
650 cris-linux-tdep.o cris-tdep.o \
653 frv-linux-tdep.o frv-tdep.o \
655 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
656 hppa-linux-tdep.o hppa-tdep.o \
657 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
658 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
659 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
660 i386-dicos-tdep.o i386-darwin-tdep.o \
665 m32r-linux-tdep.o m32r-tdep.o \
667 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
670 microblaze-tdep.o microblaze-linux-tdep.o \
671 mips-linux-tdep.o mips-sde-tdep.o \
672 mipsnbsd-tdep.o mips-tdep.o \
673 mn10300-linux-tdep.o mn10300-tdep.o \
677 nios2-tdep.o nios2-linux-tdep.o \
679 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
680 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
681 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
682 rs6000-lynx178-tdep.o \
686 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
687 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
688 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
689 spu-tdep.o spu-multiarch.o solib-spu.o \
690 tic6x-tdep.o tic6x-linux-tdep.o \
691 tilegx-tdep.o tilegx-linux-tdep.o \
693 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
695 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
698 nbsd-tdep.o obsd-tdep.o \
700 solib-frv.o solib-svr4.o \
701 solib-darwin.o solib-dsbt.o \
702 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
703 remote-m32r-sdi.o remote-mips.o \
710 # Host-dependent makefile fragment comes in here.
712 # End of host-dependent makefile fragment
716 "exec_prefix=$(exec_prefix)" \
717 "infodir=$(infodir)" \
718 "datarootdir=$(datarootdir)" \
720 "htmldir=$(htmldir)" \
724 "datadir=$(datadir)" \
725 "includedir=$(includedir)" \
726 "against=$(against)" \
727 "DESTDIR=$(DESTDIR)" \
729 "AR_FLAGS=$(AR_FLAGS)" \
733 "CXXFLAGS=$(CXXFLAGS)" \
734 "DLLTOOL=$(DLLTOOL)" \
735 "LDFLAGS=$(LDFLAGS)" \
737 "MAKEINFO=$(MAKEINFO)" \
738 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
739 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
740 "MAKEHTML=$(MAKEHTML)" \
741 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
742 "INSTALL=$(INSTALL)" \
743 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
744 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
745 "INSTALL_DATA=$(INSTALL_DATA)" \
746 "RUNTEST=$(RUNTEST)" \
747 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
749 # Flags that we pass when building the testsuite.
751 # empty for native, $(target_alias)/ for cross
752 target_subdir
= @target_subdir@
755 if [ -f $${rootme}/../gcc/xgcc ] ; then \
756 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
757 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
759 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
762 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
765 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
770 if [ -f $${rootme}/../gcc/xg++ ] ; then \
771 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
772 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
774 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
777 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
780 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
784 # The use of $$(x_FOR_TARGET) reduces the command line length by not
785 # duplicating the lengthy definition.
786 TARGET_FLAGS_TO_PASS
= \
788 "exec_prefix=$(exec_prefix)" \
789 "against=$(against)" \
790 'CC=$$(CC_FOR_TARGET)' \
791 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
793 'CXX=$$(CXX_FOR_TARGET)' \
794 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
795 "CXXFLAGS=$(CXXFLAGS)" \
796 "INSTALL=$(INSTALL)" \
797 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
798 "INSTALL_DATA=$(INSTALL_DATA)" \
799 "MAKEINFO=$(MAKEINFO)" \
800 "MAKEHTML=$(MAKEHTML)" \
801 "RUNTEST=$(RUNTEST)" \
802 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
803 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
806 # All source files that go into linking GDB.
807 # Links made at configuration time should not be specified here, since
808 # SFILES is used in building the distribution archive.
810 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
812 addrmap.c auto-load.c \
813 auxv.c ax-general.c ax-gdb.c \
817 block.c blockframe.c \
818 breakpoint.c break-catch-sig.c break-catch-throw.c \
819 break-catch-syscall.c \
820 build-id.c buildsym.c \
821 c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
822 charset.c common
/cleanups.c cli-out.c coffread.c coff-pe-read.c \
823 complaints.c completer.c continuations.c corefile.c corelow.c \
824 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
825 d-exp.y d-lang.c d-valprint.c \
827 dbxread.c demangle.c dictionary.c disasm.c doublest.c \
828 dtrace-probe.c dummy-frame.c \
829 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
830 dwarf2-frame-tailcall.c \
831 elfread.c environ.c eval.c event-loop.c event-top.c \
832 exceptions.c expprint.c extension.c \
833 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
834 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
835 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
836 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
837 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
840 infcmd.c inflow.c infrun.c \
843 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
844 language.c linespec.c minidebug.c \
845 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
846 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
847 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
848 memrange.c mi
/mi-common.c \
850 objfiles.c osabi.c observer.c osdata.c \
852 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
853 proc-service.list progspace.c \
854 prologue-value.c psymtab.c \
855 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
857 serial.c ser-base.c ser-unix.c skip.c \
858 solib.c solib-target.c source.c \
859 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
860 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
861 target.c target-dcache.c target-descriptions.c target-memory.c \
862 thread.c top.c tracepoint.c \
866 ui-out.c utils.c ui-file.h ui-file.c \
868 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
869 xml-tdesc.c xml-support.c \
870 inferior.c gdb_usleep.c \
871 record.c record-full.c gcore.c \
874 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
875 sol-thread.c stub-termcap.c \
876 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
877 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
878 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
879 target
/waitstatus.c common
/print-utils.c common
/rsp-low.c \
880 common
/errors.c common
/common-debug.c common
/common-exceptions.c \
881 common
/btrace-common.c common
/common-remote-fileio.c \
882 $(SUBDIR_GCC_COMPILE_SRCS
)
884 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
886 # Header files that need to have srcdir added. Note that in the cases
887 # where we use a macro like $(gdbcmd_h), things are carefully arranged
888 # so that each .h file is listed exactly once (M-x tags-search works
889 # wrong if TAGS has files twice). Because this is tricky to get
890 # right, it is probably easiest just to list .h files here directly.
893 common
/gdb_signals.h nat
/gdb_thread_db.h common
/gdb_vecs.h \
894 common
/x86-xstate.h nat
/linux-ptrace.h nat
/mips-linux-watch.h \
895 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
896 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
897 exec.h m32r-tdep.h osabi.h gdbcore.h amd64bsd-nat.h \
898 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
899 ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
900 nto-tdep.h serial.h \
901 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
902 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
903 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
904 compile
/compile.h gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
905 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
906 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
907 amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
908 gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
909 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
910 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
911 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
912 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
913 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
914 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
915 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
916 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
917 target.h target-dcache.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
918 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
919 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
920 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
921 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
922 expression.h score-tdep.h gdb_select.h ser-tcp.h \
923 extension.h extension-priv.h \
924 build-id.h buildsym.h valprint.h \
925 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
926 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
927 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
928 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
929 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
930 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
931 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h \
932 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
933 m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
934 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
935 rs6000-tdep.h rs6000-aix-tdep.h \
936 common
/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
937 language.h nbsd-tdep.h solib-svr4.h \
938 macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
939 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
940 regformats
/regdef.h config
/i386
/nm-i386gnu.h \
941 config
/i386
/nm-fbsd.h \
942 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
943 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
944 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
945 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
946 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
947 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
948 psymtab.h psympriv.h progspace.h bfin-tdep.h \
949 amd64-darwin-tdep.h charset-list.h \
950 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
951 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
952 i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
953 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
954 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
955 record-full.h solib-aix.h \
956 solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
957 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
958 gnulib
/import
/extra
/snippet
/warn-on-use.h \
959 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
960 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
961 common
/format.h common
/host-defs.h utils.h common
/queue.h \
962 nat
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
963 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat
/linux-btrace.h \
964 nat
/ppc-linux.h ctf.h nat
/x86-cpuid.h nat
/x86-gcc-cpuid.h target
/resume.h \
965 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h \
966 common
/print-utils.h common
/rsp-low.h nat
/x86-dregs.h x86-linux-nat.h \
967 i386-linux-nat.h common
/common-defs.h common
/errors.h common
/common-types.h \
968 common
/common-debug.h common
/cleanups.h common
/gdb_setjmp.h \
969 common
/common-exceptions.h target
/target.h common
/symbol.h \
970 common
/common-regcache.h fbsd-tdep.h nat
/linux-personality.h \
971 common
/common-remote-fileio.h nat
/x86-linux.h nat
/x86-linux-dregs.h
973 # Header files that already have srcdir in them, or which are in objdir.
975 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
978 # GDB "info" files, which should be included in their entirety
979 INFOFILES
= gdb.
info*
981 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
983 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
984 # default their values the way we do for SER_HARDWIRE; in the future
985 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
986 # variables analogous to SER_HARDWIRE which get defaulted in this
989 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
990 $(REMOTE_OBS
) $(SIM_OBS
)
992 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
993 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
994 # and it's more useful to see it in the .y file.
995 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
997 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
999 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1003 auto-load.o auxv.o \
1006 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
1007 break-catch-syscall.o \
1008 findvar.o regcache.o cleanups.o \
1009 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
1010 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
1011 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
1012 linespec.o dictionary.o \
1015 expprint.o environ.o stack.o thread.o \
1024 macrotab.o macrocmd.o macroexp.o macroscope.o \
1026 event-loop.o event-top.o inf-loop.o completer.o \
1027 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
1029 memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
1030 build-id.o buildsym.o \
1035 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
1036 dbxread.o coffread.o coff-pe-read.o \
1037 dwarf2read.o mipsread.o stabsread.o corefile.o \
1038 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
1039 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
1040 ada-tasks.o ada-varobj.o c-varobj.o \
1041 ui-out.o cli-out.o \
1043 go-lang.o go-valprint.o go-typeprint.o \
1044 jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
1045 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
1047 complaints.o typeprint.o \
1048 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
1049 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
1051 serial.o mdebugread.o top.o utils.o \
1054 frame.o frame-unwind.o doublest.o \
1057 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
1062 solib.o solib-target.o \
1063 prologue-value.o memory-map.o memrange.o \
1064 xml-support.o xml-syscall.o xml-utils.o \
1065 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
1066 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
1067 gdb_vecs.o jit.o progspace.o skip.o probe.o \
1068 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
1069 format.o registry.o btrace.o record-btrace.o waitstatus.o \
1070 print-utils.o rsp-low.o errors.o common-debug.o debug.o \
1071 common-exceptions.o btrace-common.o common-remote-fileio.o \
1072 $(SUBDIR_GCC_COMPILE_OBS
)
1076 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1077 CLEANDIRS
= $(SUBDIRS
)
1079 # List of subdirectories in the build tree that must exist.
1080 # This is used to force build failures in existing trees when
1081 # a new directory is added.
1082 # The format here is for the `case' shell command.
1083 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1085 # For now, shortcut the "configure GDB for fewer languages" stuff.
1091 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1096 d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
1098 # Things which need to be built when making a distribution.
1100 DISTSTUFF
= $(YYFILES
)
1103 # All generated files which can be included by another file.
1104 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
1105 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
1111 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1112 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1116 # The check target can not use subdir_do, because subdir_do does not
1117 # use TARGET_FLAGS_TO_PASS.
1119 @if
[ -f testsuite
/Makefile
]; then \
1120 rootme
=`pwd`; export rootme
; \
1121 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1123 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1127 @if
[ -f testsuite
/Makefile
]; then \
1128 rootme
=`pwd`; export rootme
; \
1129 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1131 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1135 @if
[ -f testsuite
/Makefile
]; then \
1136 rootme
=`pwd`; export rootme
; \
1137 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1139 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
1142 # The idea is to parallelize testing of multilibs, for example:
1143 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1144 # will run 3 concurrent sessions of check, eventually testing all 10
1145 # combinations. GNU make is required for the % pattern to work, as is
1146 # a shell that expands alternations within braces. If GNU make is not
1147 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1148 # prevent serialized checking due to the passed RUNTESTFLAGS.
1149 # FIXME: use config.status --config not --version, when available.
1151 @if
[ -f testsuite
/config.status
]; then \
1152 rootme
=`pwd`; export rootme
; \
1153 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1154 target
=`echo "$@" | sed 's,//.*,,'`; \
1155 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1156 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1157 testdir
=testsuite.
$$vardots; \
1158 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1159 configargs
=`cd testsuite && ./config.status --version | \
1160 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1161 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1163 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1164 "\"--srcdir=\$$rootsrc/testsuite\"" \
1166 else :; fi
&& cd
$$testdir && \
1167 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1168 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1169 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1173 # The set of headers checked by 'check-headers' by default.
1174 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1176 # Try to compile each header in isolation, thus ensuring headers are
1179 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1183 # make check-headers CHECK_HEADERS="header.h list.h"
1185 # to check specific headers.
1188 @echo Checking headers.
1189 for i in
$(CHECK_HEADERS
) ; do \
1190 $(CC
) -x c
-c
-fsyntax-only
$(INTERNAL_CFLAGS
) \
1191 -include defs.h
$(srcdir)/$$i ; \
1193 .PHONY
: check-headers
1195 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1196 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1198 # Traditionally "install" depends on "all". But it may be useful
1199 # not to; for example, if the user has made some trivial change to a
1200 # source file and doesn't care about rebuilding or just wants to save the
1201 # time it takes for make to check that all is up to date.
1202 # install-only is intended to address that need.
1204 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1206 install-only
: $(CONFIG_INSTALL
)
1207 transformed_name
=`t='$(program_transform_name)'; \
1208 echo gdb | sed -e "$$t"` ; \
1209 if
test "x$$transformed_name" = x
; then \
1210 transformed_name
=gdb
; \
1214 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1215 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1216 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1217 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1218 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1219 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1221 transformed_name
=`t='$(program_transform_name)'; \
1222 echo gcore | sed -e "$$t"` ; \
1223 if
test "x$$transformed_name" = x
; then \
1224 transformed_name
=gcore
; \
1228 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1229 $(INSTALL_SCRIPT
) gcore \
1230 $(DESTDIR
)$(bindir)/$$transformed_name; \
1232 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1235 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1236 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1237 `test -z '$(STRIP)' || \
1238 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1241 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1244 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1246 uninstall: force $(CONFIG_UNINSTALL
)
1247 transformed_name
=`t='$(program_transform_name)'; \
1248 echo gdb | sed -e $$t` ; \
1249 if
test "x$$transformed_name" = x
; then \
1250 transformed_name
=gdb
; \
1254 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1255 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1256 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1258 transformed_name
=`t='$(program_transform_name)'; \
1259 echo gcore | sed -e "$$t"` ; \
1260 if
test "x$$transformed_name" = x
; then \
1261 transformed_name
=gcore
; \
1265 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1267 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1269 # The C++ name parser can be built standalone for testing.
1270 test-cp-name-parser.o
: cp-name-parser.c
1271 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1274 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1275 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1276 test-cp-name-parser.o
$(LIBIBERTY
)
1278 # We do this by grepping through sources. If that turns out to be too slow,
1279 # maybe we could just require every .o file to have an initialization routine
1280 # of a given name (top.o -> _initialize_top, etc.).
1282 # Formatting conventions: The name of the _initialize_* routines must start
1283 # in column zero, and must not be inside #if.
1285 # Note that the set of files with init functions might change, or the names
1286 # of the functions might change, so this files needs to depend on all the
1287 # object files that will be linked into gdb.
1289 # FIXME: There is a problem with this approach - init.c may force
1290 # unnecessary files to be linked in.
1292 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1293 # the first call is to _initialize_gdbtypes (implemented by explicitly
1294 # putting that function's name first in the init.l-tmp file). This is
1295 # a hack to ensure that all the architecture dependant global
1296 # builtin_type_* variables are initialized before anything else
1297 # (per-architecture code is called in the same order that it is
1298 # registered). The ``correct fix'' is to have all the builtin types
1299 # made part of the architecture and initialize them on-demand (using
1300 # gdbarch_data) just like everything else. The catch is that other
1301 # modules still take the address of these builtin types forcing them
1302 # to be variables, sigh!
1304 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1305 # anchored on the first column and excludes the ``/'' character so
1306 # that it doesn't add the $(srcdir) prefix to any file that already
1307 # has an absolute path. It turns out that $(DEC)'s True64 make
1308 # automatically adds the $(srcdir) prefixes when it encounters files
1309 # in sub-directories such as cli/ and mi/.
1311 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1312 # duplicates. Files in the gdb/ directory can end up appearing in
1313 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1315 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
) $(SUBDIR_GCC_COMPILE_SRCS
)
1316 init.c
: $(INIT_FILES
)
1318 @
rm -f init.c-tmp init.l-tmp
1320 @echo gdbtypes
> init.l-tmp
1321 @
-LANG
=C
; export LANG
; \
1322 LC_ALL
=C
; export LC_ALL
; \
1323 echo
$(INIT_FILES
) | \
1326 -e
'/^gdbtypes.[co]$$/d' \
1327 -e
'/^init.[co]$$/d' \
1328 -e
'/xdr_ld.[co]$$/d' \
1329 -e
'/xdr_ptrace.[co]$$/d' \
1330 -e
'/xdr_rdb.[co]$$/d' \
1331 -e
'/udr.[co]$$/d' \
1332 -e
'/udip2soc.[co]$$/d' \
1333 -e
'/udi2go32.[co]$$/d' \
1334 -e
'/version.[co]$$/d' \
1335 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1336 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1337 -e
's/\.[co]$$/.c/' \
1338 -e
's,signals\.c,common/signals\.c,' \
1339 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1341 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1346 * ) echo
$$f ; fs
="$$fs $$f";; \
1349 @echo
'/* Do not modify this file. */' >>init.c-tmp
1350 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1351 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1352 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1353 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1354 @echo
'void' >>init.c-tmp
1355 @echo
'initialize_all_files (void)' >>init.c-tmp
1356 @echo
'{' >>init.c-tmp
1357 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1358 @echo
'}' >>init.c-tmp
1360 @mv init.c-tmp init.c
1364 # Create a library of the gdb object files and build GDB by linking
1367 # init.o is very important. It pulls in the rest of GDB.
1368 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1369 libgdb.a
: $(LIBGDB_OBS
)
1371 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1374 # Removing the old gdb first works better if it is running, at least on SunOS.
1375 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1377 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1378 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1379 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1381 # Convenience rule to handle recursion.
1382 $(LIBGNU
) $(GNULIB_H
): all-lib
1383 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1384 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1387 # Convenience rule to handle recursion.
1388 .PHONY
: all-data-directory
1389 all-data-directory
: data-directory
/Makefile
1390 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1392 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1393 # on itself without copying the executable. So "make gdb1" will make
1394 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1395 # Removing gdb1 before the copy is the right thing if gdb1 is open
1396 # in another process.
1397 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1399 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1401 # Put the proper machine-specific files first, so M-. on a machine
1402 # specific routine gets the one for the correct machine. (FIXME: those
1403 # files go in twice; we should be removing them from the main list).
1405 # TAGS depends on all the files that go into it so you can rebuild TAGS
1406 # with `make TAGS' and not have to say `rm TAGS' first.
1408 GDB_NM_FILE
= @GDB_NM_FILE@
1409 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1411 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1412 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1413 echo $(srcdir)/$$i ; \
1414 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1416 done) | sed -e 's/\.o$$/\.c/'` \
1417 `find $(srcdir)/config -name '*.h' -print`
1421 clean mostlyclean: $(CONFIG_CLEAN
)
1422 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1423 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1424 rm -f init.c version.c observer.h observer.inc
1425 rm -f gdb
$(EXEEXT
) core make.log
1426 rm -f gdb
[0-9]$(EXEEXT
)
1427 rm -f test-cp-name-parser
$(EXEEXT
)
1428 rm -f xml-builtin.c stamp-xml
1431 # This used to depend on c-exp.c m2-exp.c TAGS
1432 # I believe this is wrong; the makefile standards for distclean just
1433 # describe removing files; the only sort of "re-create a distribution"
1434 # functionality described is if the distributed files are unmodified.
1435 # NB: While GDBSERVER might be configured on native systems, it isn't
1436 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1438 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1439 rm -rf
$(GNULIB_BUILDDIR
)
1440 rm -f gdbserver
/config.status gdbserver
/config.log
1441 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1442 rm -f gdbserver
/Makefile gdbserver
/config.cache
1443 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1444 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1445 rm -f config.log config.cache
1449 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1450 realclean: maintainer-clean
1452 local-maintainer-clean
:
1453 @echo
"This command is intended for maintainers to use;"
1454 @echo
"it deletes files that may require special tools to rebuild."
1457 ada-lex.c ada-exp.c \
1459 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1460 rm -f TAGS
$(INFOFILES
)
1462 rm -f nm.h config.status
1464 do-maintainer-clean
:
1465 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1468 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1469 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1472 @for i in
$(DODIRS
); do \
1474 $(REQUIRED_SUBDIRS
)) \
1475 if
[ ! -f .
/$$i/Makefile
] ; then \
1476 echo
"Missing $$i/Makefile" >&2 ; \
1480 if
[ -f .
/$$i/Makefile
] ; then \
1482 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1483 else exit
1 ; fi
; \
1487 Makefile
: Makefile.in config.status @frags@
1488 # Regenerate the Makefile and the tm.h / nm.h links.
1489 CONFIG_FILES
="Makefile" \
1492 $(SHELL
) config.status
1494 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1495 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1496 CONFIG_COMMANDS
="depfiles" \
1499 $(SHELL
) config.status
1501 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1502 CONFIG_FILES
="data-directory/Makefile" \
1503 CONFIG_COMMANDS
="depfiles" \
1506 $(SHELL
) config.status
1510 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
1512 jit-reader.h
: $(srcdir)/jit-reader.in
1513 $(SHELL
) config.status
$@
1515 gcore
: $(srcdir)/gcore.in
1516 $(SHELL
) config.status
$@
1518 config.h
: stamp-h
; @true
1519 stamp-h
: $(srcdir)/config.in config.status
1520 CONFIG_HEADERS
=config.h
:config.in \
1521 CONFIG_COMMANDS
="default depdir" \
1524 $(SHELL
) config.status
1526 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
1527 $(SHELL
) config.status
--recheck
1530 ACLOCAL_AMFLAGS
= -I ..
/config
1532 # Keep these in sync with the includes in acinclude.m4.
1535 acx_configure_dir.m4 \
1539 ..
/config
/acinclude.m4 \
1540 ..
/config
/plugins.m4 \
1541 ..
/config
/lead-dot.m4 \
1542 ..
/config
/override.m4 \
1543 ..
/config
/largefile.m4 \
1544 ..
/config
/gettext-sister.m4 \
1545 ..
/config
/lib-ld.m4 \
1546 ..
/config
/lib-prefix.m4 \
1547 ..
/config
/lib-link.m4 \
1550 ..
/config
/depstand.m4 \
1551 ..
/config
/lcmessage.m4 \
1552 ..
/config
/codeset.m4 \
1555 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1556 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1559 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1560 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1561 cd
$(srcdir) && $(AUTOCONF
)
1563 AUTOHEADER
= autoheader
1564 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1565 cd
$(srcdir) && $(AUTOHEADER
)
1569 # automatic rebuilding in automake-generated Makefiles requires
1570 # this rule in the toplevel Makefile, which, with GNU make, causes
1571 # the desired updates through the implicit regeneration of the Makefile
1572 # and all of its prerequisites.
1579 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1581 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1583 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1585 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1587 # GDB MANUAL: TeX dvi file
1589 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1591 # GDB MANUAL: info file
1593 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1595 # Make copying.c from COPYING
1596 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1597 awk
-f
$(srcdir)/copying.awk \
1598 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1599 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1601 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1602 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1603 $(host_alias
) $(target_alias
) version.c
1605 observer.h
: observer.sh doc
/observer.texi
1606 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1608 observer.inc
: observer.sh doc
/observer.texi
1609 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1612 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1613 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1615 gdb.cxref
: $(SFILES
)
1616 cxref
-I.
$(SFILES
) >gdb.cxref
1620 # GNU Make has an annoying habit of putting *all* the Makefile variables
1621 # into the environment, unless you include this target as a circumvention.
1622 # Rumor is that this will be fixed (and this target can be removed)
1626 # GNU Make 3.63 has a different problem: it keeps tacking command line
1627 # overrides onto the definition of $(MAKE). This variable setting
1632 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1633 aarch64-linux-nat.c \
1635 alphabsd-nat.c alpha-linux-nat.c \
1636 alpha-tdep.c alpha-mdebug-tdep.c \
1637 alpha-linux-tdep.c \
1638 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1639 amd64-nat.c amd64-tdep.c \
1640 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1641 amd64nbsd-nat.c amd64nbsd-tdep.c \
1642 amd64obsd-nat.c amd64obsd-tdep.c \
1643 amd64-darwin-tdep.c \
1644 amd64-dicos-tdep.c \
1645 amd64-linux-nat.c amd64-linux-tdep.c \
1647 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1648 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1650 bfin-linux-tdep.c bfin-tdep.c \
1651 bsd-uthread.c bsd-kvm.c \
1653 dcache.c dicos-tdep.c darwin-nat.c \
1659 go32-nat.c h8300-tdep.c \
1661 hppa-linux-tdep.c hppa-linux-nat.c \
1663 hppanbsd-nat.c hppanbsd-tdep.c \
1664 hppaobsd-nat.c hppaobsd-tdep.c \
1665 i386-tdep.c i386-linux-nat.c \
1666 i386v4-nat.c i386-cygwin-tdep.c \
1667 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1668 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1670 i386-darwin-tdep.c i386-darwin-nat.c \
1672 i386-linux-tdep.c x86-nat.c \
1673 i386-sol2-nat.c i386-sol2-tdep.c \
1674 i386gnu-nat.c i386gnu-tdep.c \
1675 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1677 ia64-libunwind-tdep.c \
1684 m32r-linux-nat.c m32r-linux-tdep.c \
1686 m68kbsd-nat.c m68kbsd-tdep.c \
1687 m68klinux-nat.c m68klinux-tdep.c \
1688 m88k-tdep.c m88kbsd-nat.c \
1689 microblaze-tdep.c microblaze-linux-tdep.c \
1690 mingw-hdep.c common
/mingw-strerror.c \
1691 mips-linux-nat.c mips-linux-tdep.c \
1694 mipsnbsd-nat.c mipsnbsd-tdep.c \
1695 mips64obsd-nat.c mips64obsd-tdep.c \
1697 nios2-tdep.c nios2-linux-tdep.c \
1698 nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
1699 posix-hdep.c common
/posix-strerror.c \
1700 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1701 ppcfbsd-nat.c ppcfbsd-tdep.c \
1702 ppcnbsd-nat.c ppcnbsd-tdep.c \
1703 ppcobsd-nat.c ppcobsd-tdep.c \
1705 ravenscar-thread.c \
1706 remote-m32r-sdi.c remote-mips.c \
1710 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1711 rs6000-lynx178-tdep.c \
1713 s390-linux-tdep.c s390-linux-nat.c \
1715 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1716 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1719 sparc-linux-nat.c sparc-linux-tdep.c \
1720 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1721 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1722 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1723 sparc64nbsd-nat.c sparc64nbsd-tdep.c \
1724 sparc64obsd-nat.c sparc64obsd-tdep.c \
1725 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1726 sparc-ravenscar-thread.c \
1727 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1728 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1730 vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1731 windows-nat.c windows-tdep.c \
1734 xtensa-tdep.c xtensa-config.c \
1735 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1737 # Some files need explicit build rules (due to -Werror problems) or due
1738 # to sub-directory fun 'n' games.
1740 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1741 # errors. It turns out that that is the least of monitor.c's
1742 # problems. The function print_vsprintf appears to be using
1743 # va_arg(long) to extract CORE_ADDR parameters - something that
1744 # definitly will not work. "monitor.c" needs to be rewritten so that
1745 # it doesn't use format strings and instead uses callbacks.
1746 monitor.o
: $(srcdir)/monitor.c
1747 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1748 $(COMPILE.post
) $(srcdir)/monitor.c
1751 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1752 # checks format strings.
1753 printcmd.o
: $(srcdir)/printcmd.c
1754 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1755 $(COMPILE.post
) $(srcdir)/printcmd.c
1758 # ada-exp.c can appear in srcdir, for releases; or in ., for
1759 # development builds.
1760 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1762 # Some versions of flex give output that triggers
1763 # -Wold-style-definition.
1764 ada-exp.o
: ada-exp.c
1765 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1766 $(COMPILE.post
) $(ADA_EXP_C
)
1769 # Message files. Based on code in gcc/Makefile.in.
1771 # Rules for generating translated message descriptions. Disabled by
1772 # autoconf if the tools are not available.
1774 .SUFFIXES
: .po .gmo .pox .pot
1775 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1779 # This notation should be acceptable to all Make implementations used
1780 # by people who are interested in updating .po files.
1781 update-po
: $(CATALOGS
:.gmo
=.pox
)
1783 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1786 -test -d po || mkdir po
1787 $(GMSGFMT
) --statistics
-o
$@
$<
1789 # The new .po has to be gone over by hand, so we deposit it into
1790 # build/po with a different extension. If build/po/$(PACKAGE).pot
1791 # exists, use it (it was just created), else use the one in srcdir.
1793 -test -d po || mkdir po
1794 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1795 then echo po/$(PACKAGE).pot; \
1796 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1798 # This rule has to look for .gmo modules in both srcdir and the cwd,
1799 # and has to check that we actually have a catalog for each language,
1800 # in case they weren't built or included with the distribution.
1802 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1803 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1804 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1805 if
[ -f
$$cat ]; then
:; \
1806 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1809 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1810 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1811 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1812 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1813 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1816 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1817 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1818 if
[ -f
$$cat ]; then
:; \
1819 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1822 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1823 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1825 # Delete po/*.gmo only if we are not building in the source directory.
1827 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1829 # Rule for regenerating the message template (gdb.pot). Instead of
1830 # forcing everyone to edit POTFILES.in, which proved impractical, this
1831 # rule has no dependencies and always regenerates gdb.pot. This is
1832 # relatively harmless since the .po files do not directly depend on
1833 # it. The .pot file is left in the build directory. Since GDB's
1834 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1835 # files) force this rule.
1836 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1837 po
/$(PACKAGE
).pot
: force
1838 -test -d po || mkdir po
1839 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1843 # YACC/LEX dependencies
1845 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1846 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1847 # said LANG-exp.c rather than ./c-exp.c some makes would
1848 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1849 # decls for malloc/realloc/free which conflict with everything else.
1850 # Strictly speaking c-exp.c should therefore depend on
1851 # Makefile.in, but that was a pretty big annoyance.
1856 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1857 ||
(rm -f
$@
; false
)
1858 sed
-e
'/extern.*malloc/d' \
1859 -e
'/extern.*realloc/d' \
1860 -e
'/extern.*free/d' \
1861 -e
'/include.*malloc.h/d' \
1862 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1863 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1864 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1865 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1866 -e
'/^#line.*y.tab.c/d' \
1870 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1871 $(FLEX
) -o
$@
$< && \
1873 sed
-e
'/extern.*malloc/d' \
1874 -e
'/extern.*realloc/d' \
1875 -e
'/extern.*free/d' \
1876 -e
'/include.*malloc.h/d' \
1877 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1878 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1879 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1880 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1881 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1885 elif
[ -f
$@
]; then \
1886 echo
"Warning: $*.c older than $*.l and flex not available."; \
1888 echo
"$@ missing and flex not available."; \
1892 .PRECIOUS
: ada-lex.c
1896 xml-builtin.c
: stamp-xml
; @true
1897 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1898 rm -f xml-builtin.tmp
1900 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1901 xml-builtin.tmp
$(XMLFILES
)
1902 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1903 echo stamp
> stamp-xml
1905 .PRECIOUS
: xml-builtin.c
1908 # gdb/cli/ dependencies
1910 # Need to explicitly specify the compile rule as make will do nothing
1911 # or try to compile the object file into the sub-directory.
1913 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1914 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1917 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1918 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1921 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1922 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1925 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1926 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1929 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1930 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1933 cli-script.o
: $(srcdir)/cli
/cli-script.c
1934 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1937 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1938 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1941 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1942 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1945 # GCC Compile support dependencies
1947 # Need to explicitly specify the compile rule as make will do nothing
1948 # or try to compile the object file into the sub-directory.
1950 compile.o
: $(srcdir)/compile
/compile.c
1951 $(COMPILE
) $(srcdir)/compile
/compile.c
1954 compile-c-types.o
: $(srcdir)/compile
/compile-c-types.c
1955 $(COMPILE
) $(srcdir)/compile
/compile-c-types.c
1958 compile-c-symbols.o
: $(srcdir)/compile
/compile-c-symbols.c
1959 $(COMPILE
) $(srcdir)/compile
/compile-c-symbols.c
1962 compile-object-load.o
: $(srcdir)/compile
/compile-object-load.c
1963 $(COMPILE
) $(srcdir)/compile
/compile-object-load.c
1966 compile-object-run.o
: $(srcdir)/compile
/compile-object-run.c
1967 $(COMPILE
) $(srcdir)/compile
/compile-object-run.c
1970 compile-loc2c.o
: $(srcdir)/compile
/compile-loc2c.c
1971 $(COMPILE
) $(srcdir)/compile
/compile-loc2c.c
1974 compile-c-support.o
: $(srcdir)/compile
/compile-c-support.c
1975 $(COMPILE
) $(srcdir)/compile
/compile-c-support.c
1980 # GDBTK sub-directory
1982 # Need to explicitly specify the compile rule as make will do nothing
1983 # or try to compile the object file into the mi directory.
1985 all-gdbtk
: insight
$(EXEEXT
)
1988 transformed_name
=`t='$(program_transform_name)'; \
1989 echo insight | sed -e $$t` ; \
1990 if
test "x$$transformed_name" = x
; then \
1991 transformed_name
=insight
; \
1995 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1996 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1997 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1998 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1999 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2000 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2001 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2002 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2003 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2004 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2005 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2006 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2007 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2008 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2009 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2010 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2011 cd
$(srcdir)/gdbtk
/library
; \
2012 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2014 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2018 transformed_name
=`t='$(program_transform_name)'; \
2019 echo insight | sed -e $$t` ; \
2020 if
test "x$$transformed_name" = x
; then \
2021 transformed_name
=insight
; \
2025 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2026 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2029 rm -f insight
$(EXEEXT
)
2031 # Removing the old gdb first works better if it is running, at least on SunOS.
2032 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
2033 $(CDEPS
) $(TDEPLIBS
)
2034 rm -f insight
$(EXEEXT
)
2035 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2036 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2037 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2039 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2040 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2042 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2043 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2045 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2046 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2048 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
2049 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
2052 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2053 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2056 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2057 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2060 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2061 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2064 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2065 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2068 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2069 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2072 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2073 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2076 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2077 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2080 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2081 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2084 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2085 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2090 # gdb/mi/ dependencies
2092 # Need to explicitly specify the compile rule as make will do nothing
2093 # or try to compile the object file into the sub-directory.
2095 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
2096 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
2099 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
2100 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
2103 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
2104 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
2107 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
2108 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
2111 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
2112 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
2115 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
2116 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
2119 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
2120 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
2123 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
2124 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
2127 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
2128 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
2131 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
2132 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
2135 mi-console.o
: $(srcdir)/mi
/mi-console.c
2136 $(COMPILE
) $(srcdir)/mi
/mi-console.c
2139 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
2140 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
2143 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
2144 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
2147 mi-main.o
: $(srcdir)/mi
/mi-main.c
2148 $(COMPILE
) $(srcdir)/mi
/mi-main.c
2151 mi-out.o
: $(srcdir)/mi
/mi-out.c
2152 $(COMPILE
) $(srcdir)/mi
/mi-out.c
2155 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
2156 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
2159 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
2160 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
2163 mi-common.o
: $(srcdir)/mi
/mi-common.c
2164 $(COMPILE
) $(srcdir)/mi
/mi-common.c
2167 # gdb/common/ dependencies
2169 # Need to explicitly specify the compile rule as make will do nothing
2170 # or try to compile the object file into the sub-directory.
2172 signals.o
: $(srcdir)/common
/signals.c
2173 $(COMPILE
) $(srcdir)/common
/signals.c
2176 common-utils.o
: ${srcdir}/common
/common-utils.c
2177 $(COMPILE
) $(srcdir)/common
/common-utils.c
2180 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
2181 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
2184 xml-utils.o
: ${srcdir}/common
/xml-utils.c
2185 $(COMPILE
) $(srcdir)/common
/xml-utils.c
2188 ptid.o
: ${srcdir}/common
/ptid.c
2189 $(COMPILE
) $(srcdir)/common
/ptid.c
2192 buffer.o
: ${srcdir}/common
/buffer.c
2193 $(COMPILE
) $(srcdir)/common
/buffer.c
2196 filestuff.o
: $(srcdir)/common
/filestuff.c
2197 $(COMPILE
) $(srcdir)/common
/filestuff.c
2200 format.o
: ${srcdir}/common
/format.c
2201 $(COMPILE
) $(srcdir)/common
/format.c
2204 common-agent.o
: $(srcdir)/common
/agent.c
2205 $(COMPILE
) $(srcdir)/common
/agent.c
2208 vec.o
: ${srcdir}/common
/vec.c
2209 $(COMPILE
) $(srcdir)/common
/vec.c
2212 print-utils.o
: ${srcdir}/common
/print-utils.c
2213 $(COMPILE
) $(srcdir)/common
/print-utils.c
2216 rsp-low.o
: ${srcdir}/common
/rsp-low.c
2217 $(COMPILE
) $(srcdir)/common
/rsp-low.c
2220 errors.o
: ${srcdir}/common
/errors.c
2221 $(COMPILE
) $(srcdir)/common
/errors.c
2224 common-debug.o
: ${srcdir}/common
/common-debug.c
2225 $(COMPILE
) $(srcdir)/common
/common-debug.c
2228 cleanups.o
: ${srcdir}/common
/cleanups.c
2229 $(COMPILE
) $(srcdir)/common
/cleanups.c
2232 common-exceptions.o
: ${srcdir}/common
/common-exceptions.c
2233 $(COMPILE
) $(srcdir)/common
/common-exceptions.c
2236 posix-strerror.o
: ${srcdir}/common
/posix-strerror.c
2237 $(COMPILE
) $(srcdir)/common
/posix-strerror.c
2240 mingw-strerror.o
: ${srcdir}/common
/mingw-strerror.c
2241 $(COMPILE
) $(srcdir)/common
/mingw-strerror.c
2244 btrace-common.o
: ${srcdir}/common
/btrace-common.c
2245 $(COMPILE
) $(srcdir)/common
/btrace-common.c
2248 common-remote-fileio.o
: ${srcdir}/common
/common-remote-fileio.c
2249 $(COMPILE
) $(srcdir)/common
/common-remote-fileio.c
2252 # gdb/target/ dependencies
2254 # Need to explicitly specify the compile rule as make will do nothing
2255 # or try to compile the object file into the sub-directory.
2257 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2258 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2261 # gdb/nat/ dependencies
2263 # Need to explicitly specify the compile rule as make will do nothing
2264 # or try to compile the object file into the sub-directory.
2266 x86-dregs.o
: ${srcdir}/nat
/x86-dregs.c
2267 $(COMPILE
) $(srcdir)/nat
/x86-dregs.c
2270 linux-btrace.o
: ${srcdir}/nat
/linux-btrace.c
2271 $(COMPILE
) $(srcdir)/nat
/linux-btrace.c
2274 linux-osdata.o
: ${srcdir}/nat
/linux-osdata.c
2275 $(COMPILE
) $(srcdir)/nat
/linux-osdata.c
2278 linux-procfs.o
: $(srcdir)/nat
/linux-procfs.c
2279 $(COMPILE
) $(srcdir)/nat
/linux-procfs.c
2282 linux-ptrace.o
: $(srcdir)/nat
/linux-ptrace.c
2283 $(COMPILE
) $(srcdir)/nat
/linux-ptrace.c
2286 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2287 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2290 mips-linux-watch.o
: ${srcdir}/nat
/mips-linux-watch.c
2291 $(COMPILE
) $(srcdir)/nat
/mips-linux-watch.c
2294 ppc-linux.o
: ${srcdir}/nat
/ppc-linux.c
2295 $(COMPILE
) $(srcdir)/nat
/ppc-linux.c
2298 linux-personality.o
: ${srcdir}/nat
/linux-personality.c
2299 $(COMPILE
) $(srcdir)/nat
/linux-personality.c
2302 x86-linux.o
: ${srcdir}/nat
/x86-linux.c
2303 $(COMPILE
) $(srcdir)/nat
/x86-linux.c
2306 x86-linux-dregs.o
: ${srcdir}/nat
/x86-linux-dregs.c
2307 $(COMPILE
) $(srcdir)/nat
/x86-linux-dregs.c
2311 # gdb/tui/ dependencies
2313 # Need to explicitly specify the compile rule as make will do nothing
2314 # or try to compile the object file into the sub-directory.
2316 tui.o
: $(srcdir)/tui
/tui.c
2317 $(COMPILE
) $(srcdir)/tui
/tui.c
2320 tui-command.o
: $(srcdir)/tui
/tui-command.c
2321 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2324 tui-data.o
: $(srcdir)/tui
/tui-data.c
2325 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2328 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2329 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2332 tui-file.o
: $(srcdir)/tui
/tui-file.c
2333 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2336 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2337 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2340 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2341 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2344 tui-io.o
: $(srcdir)/tui
/tui-io.c
2345 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2348 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2349 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2352 tui-out.o
: $(srcdir)/tui
/tui-out.c
2353 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2356 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2357 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2360 tui-source.o
: $(srcdir)/tui
/tui-source.c
2361 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2364 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2365 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2368 tui-win.o
: $(srcdir)/tui
/tui-win.c
2369 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2372 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2373 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2376 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2377 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2380 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2381 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2384 # gdb/guile dependencies
2386 # Need to explicitly specify the compile rule as make will do nothing
2387 # or try to compile the object file into the sub-directory.
2389 guile.o
: $(srcdir)/guile
/guile.c
2390 $(COMPILE
) $(srcdir)/guile
/guile.c
2393 scm-arch.o
: $(srcdir)/guile
/scm-arch.c
2394 $(COMPILE
) $(srcdir)/guile
/scm-arch.c
2397 scm-auto-load.o
: $(srcdir)/guile
/scm-auto-load.c
2398 $(COMPILE
) $(srcdir)/guile
/scm-auto-load.c
2401 scm-block.o
: $(srcdir)/guile
/scm-block.c
2402 $(COMPILE
) $(srcdir)/guile
/scm-block.c
2405 scm-breakpoint.o
: $(srcdir)/guile
/scm-breakpoint.c
2406 $(COMPILE
) $(srcdir)/guile
/scm-breakpoint.c
2409 scm-cmd.o
: $(srcdir)/guile
/scm-cmd.c
2410 $(COMPILE
) $(srcdir)/guile
/scm-cmd.c
2413 scm-disasm.o
: $(srcdir)/guile
/scm-disasm.c
2414 $(COMPILE
) $(srcdir)/guile
/scm-disasm.c
2417 scm-exception.o
: $(srcdir)/guile
/scm-exception.c
2418 $(COMPILE
) $(srcdir)/guile
/scm-exception.c
2421 scm-frame.o
: $(srcdir)/guile
/scm-frame.c
2422 $(COMPILE
) $(srcdir)/guile
/scm-frame.c
2425 scm-gsmob.o
: $(srcdir)/guile
/scm-gsmob.c
2426 $(COMPILE
) $(srcdir)/guile
/scm-gsmob.c
2429 scm-iterator.o
: $(srcdir)/guile
/scm-iterator.c
2430 $(COMPILE
) $(srcdir)/guile
/scm-iterator.c
2433 scm-lazy-string.o
: $(srcdir)/guile
/scm-lazy-string.c
2434 $(COMPILE
) $(srcdir)/guile
/scm-lazy-string.c
2437 scm-math.o
: $(srcdir)/guile
/scm-math.c
2438 $(COMPILE
) $(srcdir)/guile
/scm-math.c
2441 scm-objfile.o
: $(srcdir)/guile
/scm-objfile.c
2442 $(COMPILE
) $(srcdir)/guile
/scm-objfile.c
2445 scm-param.o
: $(srcdir)/guile
/scm-param.c
2446 $(COMPILE
) $(srcdir)/guile
/scm-param.c
2449 scm-ports.o
: $(srcdir)/guile
/scm-ports.c
2450 $(COMPILE
) $(srcdir)/guile
/scm-ports.c
2453 scm-pretty-print.o
: $(srcdir)/guile
/scm-pretty-print.c
2454 $(COMPILE
) $(srcdir)/guile
/scm-pretty-print.c
2457 scm-progspace.o
: $(srcdir)/guile
/scm-progspace.c
2458 $(COMPILE
) $(srcdir)/guile
/scm-progspace.c
2461 scm-safe-call.o
: $(srcdir)/guile
/scm-safe-call.c
2462 $(COMPILE
) $(srcdir)/guile
/scm-safe-call.c
2465 scm-string.o
: $(srcdir)/guile
/scm-string.c
2466 $(COMPILE
) $(srcdir)/guile
/scm-string.c
2469 scm-symbol.o
: $(srcdir)/guile
/scm-symbol.c
2470 $(COMPILE
) $(srcdir)/guile
/scm-symbol.c
2473 scm-symtab.o
: $(srcdir)/guile
/scm-symtab.c
2474 $(COMPILE
) $(srcdir)/guile
/scm-symtab.c
2477 scm-type.o
: $(srcdir)/guile
/scm-type.c
2478 $(COMPILE
) $(srcdir)/guile
/scm-type.c
2481 scm-utils.o
: $(srcdir)/guile
/scm-utils.c
2482 $(COMPILE
) $(srcdir)/guile
/scm-utils.c
2485 scm-value.o
: $(srcdir)/guile
/scm-value.c
2486 $(COMPILE
) $(srcdir)/guile
/scm-value.c
2489 # gdb/python/ dependencies
2491 # Need to explicitly specify the compile rule as make will do nothing
2492 # or try to compile the object file into the sub-directory.
2494 # Flags needed to compile Python code
2495 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2497 python.o
: $(srcdir)/python
/python.c
2498 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2501 py-arch.o
: $(srcdir)/python
/py-arch.c
2502 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2505 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2506 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2509 py-block.o
: $(srcdir)/python
/py-block.c
2510 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2513 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2514 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2517 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2518 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2521 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2522 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2525 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2526 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2529 py-xmethods.o
: $(srcdir)/python
/py-xmethods.c
2530 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-xmethods.c
2533 py-event.o
: $(srcdir)/python
/py-event.c
2534 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2537 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2538 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2541 py-evts.o
: $(srcdir)/python
/py-evts.c
2542 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2545 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2546 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2549 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2550 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2553 py-frame.o
: $(srcdir)/python
/py-frame.c
2554 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2557 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2558 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2561 py-function.o
: $(srcdir)/python
/py-function.c
2562 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2565 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2566 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2569 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2570 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2573 py-infevents.o
: $(srcdir)/python
/py-infevents.c
2574 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infevents.c
2577 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2578 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2581 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2582 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2585 py-linetable.o
: $(srcdir)/python
/py-linetable.c
2586 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-linetable.c
2589 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2590 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2593 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2594 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2597 py-param.o
: $(srcdir)/python
/py-param.c
2598 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2601 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2602 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2605 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2606 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2609 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2610 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2613 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2614 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2617 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2618 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2621 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2622 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2625 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2626 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2629 py-type.o
: $(srcdir)/python
/py-type.c
2630 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2633 py-utils.o
: $(srcdir)/python
/py-utils.c
2634 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2637 py-value.o
: $(srcdir)/python
/py-value.c
2638 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2641 py-varobj.o
: $(srcdir)/python
/py-varobj.c
2642 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-varobj.c
2646 # Dependency tracking. Most of this is conditional on GNU Make being
2647 # found by configure; if GNU Make is not found, we fall back to a
2651 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2652 # Note that we put the dependencies into a .Tpo file, then move them
2653 # into place if the compile succeeds. We need this because gcc does
2654 # not atomically write the dependency output file.
2655 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2656 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2657 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2658 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2660 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2661 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2662 # depcomp handles atomicity for us, so we don't need a postcompile
2664 @GMAKE_TRUE@
override POSTCOMPILE
=
2667 # A list of all the objects we might care about in this build, for
2668 # dependency tracking.
2669 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2670 test-cp-name-parser.o
2672 # Ensure that generated files are created early. Use order-only
2673 # dependencies if available. They require GNU make 3.80 or newer,
2674 # and the .VARIABLES variable was introduced at the same time.
2675 @GMAKE_TRUE@
ifdef .VARIABLES
2676 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2678 $(all_object_files
) : $(generated_files
)
2682 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2684 ### end of the gdb Makefile.in.