1 # Copyright (C) 1989-2013 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 # This can be referenced by `LIBINTL' as computed by
48 # ZW_GNU_GETTEXT_SISTER_DIR.
58 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
59 INSTALL_DATA
= @INSTALL_DATA@
77 # If you are compiling with GCC, make sure that either 1) You have the
78 # fixed include files where GCC can reach them, or 2) You use the
79 # -traditional flag. Otherwise the ioctl calls in inflow.c
80 # will be incorrectly compiled. The "fixincludes" script in the gcc
81 # distribution will fix your include files up.
84 # Dependency tracking information.
87 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
89 # Note that these are overridden by GNU make-specific code below if
90 # GNU make is used. The overrides implement dependency tracking.
92 COMPILE.post
= -c
-o
$@
93 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
96 # Directory containing source files.
102 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
103 # not defined, but ada-lex.c is present, compilation will continue,
104 # possibly with a warning.
107 YLWRAP
= $(srcdir)/..
/ylwrap
109 # where to find makeinfo, preferably one designed for texinfo-2
110 MAKEINFO
= @MAKEINFO@
111 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
112 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
113 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
115 MAKEHTML
= $(MAKEINFO_CMD
) --html
118 # Set this up with gcc if you have gnu ld and the loader will print out
119 # line numbers for undefined references.
123 # Where is our "include" directory? Typically $(srcdir)/../include.
124 # This is essentially the header file directory for the library
125 # routines in libiberty.
126 INCLUDE_DIR
= $(srcdir)/..
/include
127 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
129 # Where is the "-liberty" library? Typically in ../libiberty.
130 LIBIBERTY
= ..
/libiberty
/libiberty.a
132 # Where is the BFD library? Typically in ../bfd.
134 BFD
= $(BFD_DIR
)/libbfd.a
135 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
136 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
138 # Where is the decnumber library? Typically in ../libdecnumber.
139 LIBDECNUMBER_DIR
= ..
/libdecnumber
140 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
141 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
142 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
144 # Where is the READLINE library? Typically in ../readline.
145 READLINE_DIR
= ..
/readline
146 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
147 READLINE
= @READLINE@
148 READLINE_DEPS
= @READLINE_DEPS@
149 READLINE_CFLAGS
= @READLINE_CFLAGS@
151 # Where is expat? This will be empty if expat was not available.
152 LIBEXPAT
= @LIBEXPAT@
154 # Where is lzma? This will be empty if lzma was not available.
157 WARN_CFLAGS
= @WARN_CFLAGS@
158 WERROR_CFLAGS
= @WERROR_CFLAGS@
159 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
160 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
162 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
163 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
165 RDYNAMIC
= @RDYNAMIC@
167 # Where is the INTL library? Typically in ../intl.
169 INTL_DEPS
= @LIBINTL_DEP@
170 INTL_CFLAGS
= @INCINTL@
172 # Did the user give us a --with-gdb-datadir option?
173 GDB_DATADIR
= @GDB_DATADIR@
175 # Helper code from gnulib.
176 GNULIB_BUILDDIR
= build-gnulib
177 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
178 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
180 # Generated headers in the gnulib directory. These must be listed
181 # so that they are generated before other files are compiled.
182 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
185 # CLI sub directory definitons
189 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
191 cli-interp.o cli-utils.o
194 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
196 cli
/cli-interp.c cli
/cli-utils.c
202 # MI sub directory definitons
205 mi-out.o mi-console.o \
206 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
207 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
208 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
209 mi-cmd-info.o mi-interp.o \
210 mi-main.o mi-parse.o mi-getopt.o
212 mi
/mi-out.c mi
/mi-console.c \
213 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
214 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
215 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
216 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
217 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
223 # TUI sub directory definitions
260 tui
/tui-wingeneral.c \
261 tui
/tui-winsource.c \
270 # python sub directory definitons
272 SUBDIR_PYTHON_OBS
= \
284 py-finishbreakpoint.o \
291 py-newobjfileevent.o \
305 SUBDIR_PYTHON_SRCS
= \
307 python
/py-auto-load.c \
309 python
/py-bpevent.c \
310 python
/py-breakpoint.c \
312 python
/py-continueevent.c \
314 python
/py-evtregistry.c \
316 python
/py-exitedevent.c \
317 python
/py-finishbreakpoint.c \
319 python
/py-function.c \
320 python
/py-gdb-readline.c \
321 python
/py-inferior.c \
322 python
/py-infthread.c \
323 python
/py-lazy-string.c \
324 python
/py-newobjfileevent.c \
325 python
/py-objfile.c \
327 python
/py-prettyprint.c \
328 python
/py-progspace.c \
329 python
/py-signalevent.c \
330 python
/py-stopevent.c \
333 python
/py-threadevent.c \
338 SUBDIR_PYTHON_LDFLAGS
=
339 SUBDIR_PYTHON_CFLAGS
=
341 # Opcodes currently live in one of two places. Either they are in the
342 # opcode library, typically ../opcodes, or they are in a header file
344 # Where is the "-lopcodes" library, with (some of) the opcode tables and
346 OPCODES_DIR
= ..
/opcodes
347 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
348 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
349 # Where are the other opcode tables which only have header file
351 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
352 # Some source files like to use #include "opcodes/file.h"
353 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
355 # The simulator is usually nonexistent; targets that include one
356 # should set this to list all the .o or .a files to be linked in.
359 WIN32LIBS
= @WIN32LIBS@
361 # Tcl et al cflags and libraries
363 TCL_CFLAGS
= @TCL_INCLUDE@
364 GDBTKLIBS
= @GDBTKLIBS@
365 # Extra flags that the GDBTK files need:
366 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
369 TK_CFLAGS
= @TK_INCLUDE@
371 X11_CFLAGS
= @TK_XINCLUDES@
375 WIN32LDAPP
= @WIN32LDAPP@
378 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
379 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
381 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
383 # The version of gdbtk we're building. This should be kept
384 # in sync with GDBTK_VERSION and friends in gdbtk.h.
386 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
388 # Gdbtk requires an absolute path to the source directory or
389 # the testsuite won't run properly.
390 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
393 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
394 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
395 SUBDIR_GDBTK_SRCS
= \
396 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
397 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
398 gdbtk
/generic
/gdbtk-interp.c \
399 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
400 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
401 gdbtk
/generic
/gdbtk-main.c
402 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
403 SUBDIR_GDBTK_LDFLAGS
=
404 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
406 CONFIG_OBS
= @CONFIG_OBS@
407 CONFIG_SRCS
= @CONFIG_SRCS@
408 CONFIG_DEPS
= @CONFIG_DEPS@
409 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
410 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
411 CONFIG_ALL
= @CONFIG_ALL@
412 CONFIG_CLEAN
= @CONFIG_CLEAN@
413 CONFIG_INSTALL
= @CONFIG_INSTALL@
414 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
416 # -I. for config files.
417 # -I$(srcdir) for gdb internal headers.
418 # -I$(srcdir)/config for more generic config files.
420 # It is also possible that you will need to add -I/usr/include/sys if
421 # your system doesn't have fcntl.h in /usr/include (which is where it
422 # should be according to Posix).
424 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
425 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
427 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
428 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
430 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
432 # CFLAGS is specifically reserved for setting from the command line
433 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
436 # Set by configure, for e.g. expat. Python installations are such that
437 # C headers are included using their basename (for example, we #include
438 # <Python.h> rather than, say, <python/Python.h>). Since the file names
439 # are sometimes a little generic, we think that the risk of collision
440 # with other header files is high. If that happens, we try to mitigate
441 # a bit the consequences by putting the Python includes last in the list.
442 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @PYTHON_CPPFLAGS@
444 # Need to pass this to testsuite for "make check". Probably should be
445 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
446 # so "make check" has the same result no matter where it is run.
449 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
450 INTERNAL_CFLAGS_BASE
= \
451 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
452 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
453 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
454 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
455 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
456 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
458 # LDFLAGS is specifically reserved for setting from the command line
462 # Profiling options need to go here to work.
463 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
464 # and have it work; that's why CFLAGS is here.
465 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
466 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
468 # If your system is missing alloca(), or, more likely, it's there but
469 # it doesn't work, then refer to libiberty.
471 # Libraries and corresponding dependencies for compiling gdb.
472 # XM_CLIBS, defined in *config files, have host-dependent libs.
473 # LIBIBERTY appears twice on purpose.
474 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
475 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) @LIBS@ @PYTHON_LIBS@ \
476 $(LIBEXPAT
) $(LIBLZMA
) \
477 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
478 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
479 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
481 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
482 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
487 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
488 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
494 # XML files to build in to GDB.
495 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
496 $(srcdir)/features
/library-list.dtd \
497 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
498 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd
500 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
501 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
502 # etc., then there will be (as part of the C library or perhaps as
503 # part of libiberty) a POSIX interface. But at least for now the
504 # host-dependent makefile fragment might need to use something else
506 SER_HARDWIRE
= @SER_HARDWIRE@
508 # The `remote' debugging target is supported for most architectures,
509 # but not all (e.g. 960)
510 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
513 # This is remote-sim.o if a simulator is to be linked in.
516 # Target-dependent object files.
517 TARGET_OBS
= @TARGET_OBS@
519 # All target-dependent objects files that require 64-bit CORE_ADDR
520 # (used with --enable-targets=all --enable-64-bit-bfd).
521 ALL_64_TARGET_OBS
= \
522 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
523 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
524 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
525 amd64-linux-tdep.o amd64nbsd-tdep.o \
526 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
527 ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
529 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
530 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
532 # All other target-dependent objects files (used with --enable-targets=all).
534 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
535 armnbsd-tdep.o armobsd-tdep.o \
536 arm-tdep.o arm-wince-tdep.o \
538 bfin-linux-tdep.o bfin-tdep.o \
541 frv-linux-tdep.o frv-tdep.o \
543 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
544 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
545 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
546 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
547 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
548 i386-dicos-tdep.o i386-darwin-tdep.o \
553 m32r-linux-tdep.o m32r-tdep.o \
555 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
558 microblaze-tdep.o microblaze-linux-tdep.o \
559 mips-irix-tdep.o mips-linux-tdep.o \
560 mipsnbsd-tdep.o mips-tdep.o \
561 mn10300-linux-tdep.o mn10300-tdep.o \
565 ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
567 rs6000-aix-tdep.o rs6000-tdep.o ppc-ravenscar-thread.o \
568 rs6000-lynx178-tdep.o \
572 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
573 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
574 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
575 spu-tdep.o spu-multiarch.o solib-spu.o \
576 tic6x-tdep.o tic6x-linux-tdep.o \
577 tilegx-tdep.o tilegx-linux-tdep.o \
579 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
581 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
584 nbsd-tdep.o obsd-tdep.o \
586 solib-frv.o solib-irix.o solib-svr4.o \
587 solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
588 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
589 remote-m32r-sdi.o remote-mips.o \
596 # Host-dependent makefile fragment comes in here.
598 # End of host-dependent makefile fragment
602 "exec_prefix=$(exec_prefix)" \
603 "infodir=$(infodir)" \
604 "datarootdir=$(datarootdir)" \
606 "htmldir=$(htmldir)" \
610 "datadir=$(datadir)" \
611 "includedir=$(includedir)" \
612 "against=$(against)" \
613 "DESTDIR=$(DESTDIR)" \
615 "AR_FLAGS=$(AR_FLAGS)" \
619 "CXXFLAGS=$(CXXFLAGS)" \
620 "DLLTOOL=$(DLLTOOL)" \
621 "LDFLAGS=$(LDFLAGS)" \
623 "MAKEINFO=$(MAKEINFO)" \
624 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
625 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
626 "MAKEHTML=$(MAKEHTML)" \
627 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
628 "INSTALL=$(INSTALL)" \
629 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
630 "INSTALL_DATA=$(INSTALL_DATA)" \
631 "RUNTEST=$(RUNTEST)" \
632 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
634 # Flags that we pass when building the testsuite.
636 # empty for native, $(target_alias)/ for cross
637 target_subdir
= @target_subdir@
640 if [ -f $${rootme}/../gcc/xgcc ] ; then \
641 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
642 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
644 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
647 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
650 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
656 if [ -f $${rootme}/../gcc/xgcc ] ; then \
657 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
658 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
660 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
663 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
666 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
670 # The use of $$(x_FOR_TARGET) reduces the command line length by not
671 # duplicating the lengthy definition.
672 TARGET_FLAGS_TO_PASS
= \
674 "exec_prefix=$(exec_prefix)" \
675 "against=$(against)" \
676 'CC=$$(CC_FOR_TARGET)' \
677 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
679 'CXX=$$(CXX_FOR_TARGET)' \
680 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
681 "CXXFLAGS=$(CXXFLAGS)" \
682 "INSTALL=$(INSTALL)" \
683 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
684 "INSTALL_DATA=$(INSTALL_DATA)" \
685 "MAKEINFO=$(MAKEINFO)" \
686 "MAKEHTML=$(MAKEHTML)" \
687 "RUNTEST=$(RUNTEST)" \
688 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
689 "FORCE_PARALLEL=$(FORCE_PARALLEL)"
691 # All source files that go into linking GDB.
692 # Links made at configuration time should not be specified here, since
693 # SFILES is used in building the distribution archive.
695 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
697 addrmap.c auto-load.c \
698 auxv.c ax-general.c ax-gdb.c \
702 block.c blockframe.c breakpoint.c buildsym.c \
703 c-exp.y c-lang.c c-typeprint.c c-valprint.c \
704 charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
705 complaints.c completer.c continuations.c corefile.c corelow.c \
706 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
707 d-lang.c d-valprint.c \
709 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
710 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
711 dwarf2-frame-tailcall.c \
712 elfread.c environ.c eval.c event-loop.c event-top.c \
713 exceptions.c expprint.c \
714 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
715 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
716 gdbarch.c arch-utils.c gdb_bfd.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
717 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
720 infcmd.c inflow.c infrun.c \
723 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
724 language.c linespec.c minidebug.c \
725 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
726 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
727 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
728 memrange.c mi
/mi-common.c \
730 objfiles.c osabi.c observer.c osdata.c \
732 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
733 proc-service.list progspace.c \
734 prologue-value.c psymtab.c \
735 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
737 serial.c ser-base.c ser-unix.c skip.c \
738 solib.c solib-target.c source.c \
739 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
740 symfile.c symfile-mem.c symmisc.c symtab.c \
741 target.c target-descriptions.c target-memory.c \
742 thread.c top.c tracepoint.c \
746 ui-out.c utils.c ui-file.h ui-file.c \
748 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
749 xml-tdesc.c xml-support.c \
750 inferior.c gdb_usleep.c \
754 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
755 regset.c sol-thread.c windows-termcap.c \
756 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
757 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
760 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
762 # Header files that need to have srcdir added. Note that in the cases
763 # where we use a macro like $(gdbcmd_h), things are carefully arranged
764 # so that each .h file is listed exactly once (M-x tags-search works
765 # wrong if TAGS has files twice). Because this is tricky to get
766 # right, it is probably easiest just to list .h files here directly.
769 common
/gdb_signals.h common
/gdb_thread_db.h common
/gdb_vecs.h \
770 common
/i386-xstate.h common
/linux-ptrace.h \
771 proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
772 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
773 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
774 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
775 ia64-tdep.h ada-lang.h ada-varobj.h varobj.h frv-tdep.h nto-tdep.h serial.h \
776 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
777 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-dump.h cli
/cli-utils.h \
778 cli
/cli-script.h macrotab.h symtab.h version.h \
779 gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
780 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
781 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
782 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
783 gdbarch.h bsd-uthread.h common
/gdb_stat.h memory-map.h memrange.h \
784 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
785 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
786 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
787 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
788 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
789 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
790 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
791 m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
792 target.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
793 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
794 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
795 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
796 tui
/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
797 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
798 call-cmds.h typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
799 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
800 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
801 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
802 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
803 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
804 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
805 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
806 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
807 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
808 common
/gdb_locale.h common
/gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
809 language.h nbsd-tdep.h solib-svr4.h \
810 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
811 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
812 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
813 config
/i386
/nm-fbsd.h \
814 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
815 config
/rs6000
/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
816 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
817 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
818 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
819 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
820 psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
821 amd64-darwin-tdep.h charset-list.h \
822 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
823 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
824 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h \
825 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
826 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
827 solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
828 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
829 gnulib
/import
/extra
/snippet
/warn-on-use.h \
830 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
831 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
832 common
/format.h common
/host-defs.h utils.h common
/queue.h \
833 common
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
834 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h
836 # Header files that already have srcdir in them, or which are in objdir.
838 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
841 # GDB "info" files, which should be included in their entirety
842 INFOFILES
= gdb.
info*
844 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
846 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
847 # default their values the way we do for SER_HARDWIRE; in the future
848 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
849 # variables analogous to SER_HARDWIRE which get defaulted in this
852 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
853 $(REMOTE_OBS
) $(SIM_OBS
)
855 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
856 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
857 # and it's more useful to see it in the .y file.
858 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
860 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
862 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
869 blockframe.o breakpoint.o findvar.o regcache.o cleanups.o \
870 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
871 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
872 block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
875 expprint.o environ.o stack.o thread.o \
882 macrotab.o macrocmd.o macroexp.o macroscope.o \
884 event-loop.o event-top.o inf-loop.o completer.o \
885 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o osabi.o copying.o \
886 memattr.o mem-break.o target.o parse.o language.o buildsym.o \
891 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
892 dbxread.o coffread.o coff-pe-read.o \
893 dwarf2read.o mipsread.o stabsread.o corefile.o \
894 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
895 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
896 ada-tasks.o ada-varobj.o \
899 go-lang.o go-valprint.o go-typeprint.o \
900 jv-lang.o jv-valprint.o jv-typeprint.o \
901 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
903 complaints.o typeprint.o \
904 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
905 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
907 serial.o mdebugread.o top.o utils.o \
910 frame.o frame-unwind.o doublest.o \
913 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
915 reggroups.o regset.o \
918 solib.o solib-target.o \
919 prologue-value.o memory-map.o memrange.o \
920 xml-support.o xml-syscall.o xml-utils.o \
921 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
922 inferior.o osdata.o gdb_usleep.o record.o gcore.o \
923 gdb_vecs.o jit.o progspace.o skip.o probe.o \
924 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
929 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
930 CLEANDIRS
= $(SUBDIRS
)
932 # List of subdirectories in the build tree that must exist.
933 # This is used to force build failures in existing trees when
934 # a new directory is added.
935 # The format here is for the `case' shell command.
936 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
938 # For now, shortcut the "configure GDB for fewer languages" stuff.
944 f-exp.c go-exp.c m2-exp.c p-exp.c
949 f-exp.o go-exp.o m2-exp.o p-exp.o
951 # Things which need to be built when making a distribution.
953 DISTSTUFF
= $(YYFILES
)
956 # All generated files which can be included by another file.
957 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
958 $(GNULIB_H
) $(NAT_GENERATED_FILES
)
964 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
965 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
969 # The check target can not use subdir_do, because subdir_do does not
970 # use TARGET_FLAGS_TO_PASS.
972 @if
[ -f testsuite
/Makefile
]; then \
973 rootme
=`pwd`; export rootme
; \
974 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
976 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
979 # The idea is to parallelize testing of multilibs, for example:
980 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
981 # will run 3 concurrent sessions of check, eventually testing all 10
982 # combinations. GNU make is required for the % pattern to work, as is
983 # a shell that expands alternations within braces. If GNU make is not
984 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
985 # prevent serialized checking due to the passed RUNTESTFLAGS.
986 # FIXME: use config.status --config not --version, when available.
988 @if
[ -f testsuite
/config.status
]; then \
989 rootme
=`pwd`; export rootme
; \
990 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
991 target
=`echo "$@" | sed 's,//.*,,'`; \
992 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
993 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
994 testdir
=testsuite.
$$vardots; \
995 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
996 configargs
=`cd testsuite && ./config.status --version | \
997 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
998 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1000 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1001 "\"--srcdir=\$$rootsrc/testsuite\"" \
1003 else :; fi
&& cd
$$testdir && \
1004 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1005 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1006 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1010 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1011 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1014 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
1015 pack gdb.t
; rm -f gdb.t
1018 # Traditionally "install" depends on "all". But it may be useful
1019 # not to; for example, if the user has made some trivial change to a
1020 # source file and doesn't care about rebuilding or just wants to save the
1021 # time it takes for make to check that all is up to date.
1022 # install-only is intended to address that need.
1024 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1026 install-only
: $(CONFIG_INSTALL
)
1027 transformed_name
=`t='$(program_transform_name)'; \
1028 echo gdb | sed -e "$$t"` ; \
1029 if
test "x$$transformed_name" = x
; then \
1030 transformed_name
=gdb
; \
1034 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1035 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1036 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1037 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1038 $(DESTDIR
)$(man1dir) ; \
1039 $(INSTALL_DATA
) $(srcdir)/gdb
.1 \
1040 $(DESTDIR
)$(man1dir)/$$transformed_name.1 ; \
1041 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1042 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1043 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1046 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1048 uninstall: force $(CONFIG_UNINSTALL
)
1049 transformed_name
=`t='$(program_transform_name)'; \
1050 echo gdb | sed -e $$t` ; \
1051 if
test "x$$transformed_name" = x
; then \
1052 transformed_name
=gdb
; \
1056 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1057 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1058 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1060 # The C++ name parser can be built standalone for testing.
1061 test-cp-name-parser.o
: cp-name-parser.c
1062 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1065 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1066 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1067 test-cp-name-parser.o
$(LIBIBERTY
)
1069 # We do this by grepping through sources. If that turns out to be too slow,
1070 # maybe we could just require every .o file to have an initialization routine
1071 # of a given name (top.o -> _initialize_top, etc.).
1073 # Formatting conventions: The name of the _initialize_* routines must start
1074 # in column zero, and must not be inside #if.
1076 # Note that the set of files with init functions might change, or the names
1077 # of the functions might change, so this files needs to depend on all the
1078 # object files that will be linked into gdb.
1080 # FIXME: There is a problem with this approach - init.c may force
1081 # unnecessary files to be linked in.
1083 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1084 # the first call is to _initialize_gdbtypes (implemented by explicitly
1085 # putting that function's name first in the init.l-tmp file). This is
1086 # a hack to ensure that all the architecture dependant global
1087 # builtin_type_* variables are initialized before anything else
1088 # (per-architecture code is called in the same order that it is
1089 # registered). The ``correct fix'' is to have all the builtin types
1090 # made part of the architecture and initialize them on-demand (using
1091 # gdbarch_data) just like everything else. The catch is that other
1092 # modules still take the address of these builtin types forcing them
1093 # to be variables, sigh!
1095 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1096 # anchored on the first column and excludes the ``/'' character so
1097 # that it doesn't add the $(srcdir) prefix to any file that already
1098 # has an absolute path. It turns out that $(DEC)'s True64 make
1099 # automatically adds the $(srcdir) prefixes when it encounters files
1100 # in sub-directories such as cli/ and mi/.
1102 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1103 # duplicates. Files in the gdb/ directory can end up appearing in
1104 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1106 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1107 init.c
: $(INIT_FILES
)
1109 @
rm -f init.c-tmp init.l-tmp
1111 @echo gdbtypes
> init.l-tmp
1112 @
-LANG
=C
; export LANG
; \
1113 LC_ALL
=C
; export LC_ALL
; \
1114 echo
$(INIT_FILES
) | \
1117 -e
'/^gdbtypes.[co]$$/d' \
1118 -e
'/^init.[co]$$/d' \
1119 -e
'/xdr_ld.[co]$$/d' \
1120 -e
'/xdr_ptrace.[co]$$/d' \
1121 -e
'/xdr_rdb.[co]$$/d' \
1122 -e
'/udr.[co]$$/d' \
1123 -e
'/udip2soc.[co]$$/d' \
1124 -e
'/udi2go32.[co]$$/d' \
1125 -e
'/version.[co]$$/d' \
1126 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1127 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1128 -e
's/\.[co]$$/.c/' \
1129 -e
's,signals\.c,common/signals\.c,' \
1130 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1132 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1137 * ) echo
$$f ; fs
="$$fs $$f";; \
1140 @echo
'/* Do not modify this file. */' >>init.c-tmp
1141 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1142 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1143 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1144 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1145 @echo
'void' >>init.c-tmp
1146 @echo
'initialize_all_files (void)' >>init.c-tmp
1147 @echo
'{' >>init.c-tmp
1148 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1149 @echo
'}' >>init.c-tmp
1151 @mv init.c-tmp init.c
1155 # Create a library of the gdb object files and build GDB by linking
1158 # init.o is very important. It pulls in the rest of GDB.
1159 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1160 libgdb.a
: $(LIBGDB_OBS
)
1162 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1165 # Removing the old gdb first works better if it is running, at least on SunOS.
1166 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1168 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1169 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1170 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1172 # Convenience rule to handle recursion.
1173 $(LIBGNU
) $(GNULIB_H
): all-lib
1174 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1175 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1178 # Convenience rule to handle recursion.
1179 .PHONY
: all-data-directory
1180 all-data-directory
: data-directory
/Makefile
1181 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1183 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1184 # on itself without copying the executable. So "make gdb1" will make
1185 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1186 # Removing gdb1 before the copy is the right thing if gdb1 is open
1187 # in another process.
1188 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1190 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1192 # Put the proper machine-specific files first, so M-. on a machine
1193 # specific routine gets the one for the correct machine. (FIXME: those
1194 # files go in twice; we should be removing them from the main list).
1196 # TAGS depends on all the files that go into it so you can rebuild TAGS
1197 # with `make TAGS' and not have to say `rm TAGS' first.
1199 GDB_NM_FILE
= @GDB_NM_FILE@
1200 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1202 @etags
$(srcdir)/$(GDB_NM_FILE
) \
1203 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1204 echo $(srcdir)/$$i ; \
1205 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1207 done) | sed -e 's/\.o$$/\.c/'` \
1208 `find $(srcdir)/config -name '*.h' -print`
1212 clean mostlyclean: $(CONFIG_CLEAN
)
1213 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1214 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1215 rm -f init.c version.c observer.h observer.inc
1216 rm -f gdb
$(EXEEXT
) core make.log
1217 rm -f gdb
[0-9]$(EXEEXT
)
1218 rm -f test-cp-name-parser
$(EXEEXT
)
1219 rm -f xml-builtin.c stamp-xml
1222 # This used to depend on c-exp.c m2-exp.c TAGS
1223 # I believe this is wrong; the makefile standards for distclean just
1224 # describe removing files; the only sort of "re-create a distribution"
1225 # functionality described is if the distributed files are unmodified.
1226 # NB: While GDBSERVER might be configured on native systems, it isn't
1227 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1229 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1230 rm -rf
$(GNULIB_BUILDDIR
)
1231 rm -f gdbserver
/config.status gdbserver
/config.log
1232 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1233 rm -f gdbserver
/Makefile gdbserver
/config.cache
1234 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1235 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1236 rm -f config.log config.cache
1240 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1241 realclean: maintainer-clean
1243 local-maintainer-clean
:
1244 @echo
"This command is intended for maintainers to use;"
1245 @echo
"it deletes files that may require special tools to rebuild."
1248 ada-lex.c ada-exp.c \
1250 f-exp.c go-exp.c m2-exp.c p-exp.c
1251 rm -f TAGS
$(INFOFILES
)
1253 rm -f nm.h config.status
1255 do-maintainer-clean
:
1256 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1259 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1260 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1263 @for i in
$(DODIRS
); do \
1265 $(REQUIRED_SUBDIRS
)) \
1266 if
[ ! -f .
/$$i/Makefile
] ; then \
1267 echo
"Missing $$i/Makefile" >&2 ; \
1271 if
[ -f .
/$$i/Makefile
] ; then \
1273 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1274 else exit
1 ; fi
; \
1278 Makefile
: Makefile.in config.status @frags@
1279 # Regenerate the Makefile and the tm.h / nm.h links.
1280 CONFIG_FILES
="Makefile" \
1283 $(SHELL
) config.status
1285 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1286 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1287 CONFIG_COMMANDS
="depfiles" \
1290 $(SHELL
) config.status
1292 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1293 CONFIG_FILES
="data-directory/Makefile" \
1294 CONFIG_COMMANDS
="depfiles" \
1297 $(SHELL
) config.status
1299 jit-reader.h
: $(srcdir)/jit-reader.in
1300 $(SHELL
) config.status
$@
1302 config.h
: stamp-h
; @true
1303 stamp-h
: $(srcdir)/config.in config.status
1304 CONFIG_HEADERS
=config.h
:config.in \
1305 CONFIG_COMMANDS
="default depdir" \
1308 $(SHELL
) config.status
1310 config.status
: $(srcdir)/configure configure.tgt configure.host
1311 $(SHELL
) config.status
--recheck
1314 ACLOCAL_AMFLAGS
= -I ..
/config
1317 acx_configure_dir.m4 \
1318 ..
/config
/extensions.m4 \
1319 ..
/config
/lead-dot.m4 \
1320 ..
/config
/proginstall.m4 \
1322 ..
/config
/acinclude.m4 \
1323 ..
/config
/override.m4 \
1324 ..
/config
/gettext-sister.m4 \
1325 ..
/config
/lib-ld.m4 \
1326 ..
/config
/lib-prefix.m4 \
1327 ..
/config
/lib-link.m4 \
1330 ..
/config
/depstand.m4 \
1331 ..
/config
/lcmessage.m4 \
1332 ..
/config
/codeset.m4
1334 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1335 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1338 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1339 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1340 cd
$(srcdir) && $(AUTOCONF
)
1342 AUTOHEADER
= autoheader
1343 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1344 cd
$(srcdir) && $(AUTOHEADER
)
1348 # automatic rebuilding in automake-generated Makefiles requires
1349 # this rule in the toplevel Makefile, which, with GNU make, causes
1350 # the desired updates through the implicit regeneration of the Makefile
1351 # and all of its prerequisites.
1358 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1360 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1362 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1364 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1366 # GDB MANUAL: TeX dvi file
1368 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1370 # GDB MANUAL: info file
1372 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1374 # Make copying.c from COPYING
1375 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1376 awk
-f
$(srcdir)/copying.awk \
1377 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1378 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1380 version.c
: Makefile version.in
1381 rm -f version.c-tmp version.c
1382 echo
'#include "version.h"' >> version.c-tmp
1383 echo
'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1384 echo
'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1385 echo
'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1386 mv version.c-tmp version.c
1388 observer.h
: observer.sh doc
/observer.texi
1389 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1391 observer.inc
: observer.sh doc
/observer.texi
1392 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1395 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1396 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1398 gdb.cxref
: $(SFILES
)
1399 cxref
-I.
$(SFILES
) >gdb.cxref
1403 # GNU Make has an annoying habit of putting *all* the Makefile variables
1404 # into the environment, unless you include this target as a circumvention.
1405 # Rumor is that this will be fixed (and this target can be removed)
1409 # GNU Make 3.63 has a different problem: it keeps tacking command line
1410 # overrides onto the definition of $(MAKE). This variable setting
1416 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1417 alpha-tdep.c alpha-mdebug-tdep.c \
1418 alpha-linux-tdep.c alpha-osf1-tdep.c \
1419 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1420 amd64-nat.c amd64-tdep.c \
1421 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1422 amd64nbsd-nat.c amd64nbsd-tdep.c \
1423 amd64obsd-nat.c amd64obsd-tdep.c \
1424 amd64-darwin-tdep.c \
1425 amd64-dicos-tdep.c \
1426 amd64-linux-nat.c amd64-linux-tdep.c \
1428 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1429 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1431 bfin-linux-tdep.c bfin-tdep.c \
1432 bsd-uthread.c bsd-kvm.c \
1434 dcache.c dicos-tdep.c darwin-nat.c \
1439 go32-nat.c h8300-tdep.c \
1440 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1441 hppa-linux-tdep.c hppa-linux-nat.c \
1442 hppabsd-nat.c hppabsd-tdep.c \
1444 hppanbsd-nat.c hppanbsd-tdep.c \
1445 i386-tdep.c i386-linux-nat.c \
1446 i386v4-nat.c i386-cygwin-tdep.c \
1447 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1448 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1450 i386-darwin-tdep.c i386-darwin-nat.c \
1452 i386-linux-tdep.c i386-nat.c \
1453 i386-sol2-nat.c i386-sol2-tdep.c \
1454 i386gnu-nat.c i386gnu-tdep.c \
1455 ia64-hpux-nat.c ia64-hpux-tdep.c \
1456 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1457 inf-ptrace.c inf-ttrace.c \
1459 ia64-libunwind-tdep.c \
1466 m32r-linux-nat.c m32r-linux-tdep.c \
1468 m68kbsd-nat.c m68kbsd-tdep.c \
1469 m68klinux-nat.c m68klinux-tdep.c \
1470 m88k-tdep.c m88kbsd-nat.c \
1471 microblaze-tdep.c microblaze-linux-tdep.c \
1473 mips-linux-nat.c mips-linux-tdep.c \
1476 mipsnbsd-nat.c mipsnbsd-tdep.c \
1477 mips64obsd-nat.c mips64obsd-tdep.c \
1478 nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1480 somread.c solib-som.c \
1482 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1483 ppcnbsd-nat.c ppcnbsd-tdep.c \
1484 ppcobsd-nat.c ppcobsd-tdep.c \
1486 ravenscar-thread.c \
1487 remote-m32r-sdi.c remote-mips.c \
1491 rs6000-nat.c rs6000-tdep.c ppc-ravenscar-thread.c \
1492 rs6000-lynx178-tdep.c \
1494 s390-tdep.c s390-nat.c \
1496 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1497 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1499 solib-irix.c solib-svr4.c solib-sunos.c \
1500 sparc-linux-nat.c sparc-linux-tdep.c \
1501 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1502 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1503 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1504 sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1505 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1506 sparc-ravenscar-thread.c \
1507 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1508 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1510 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1511 windows-nat.c windows-tdep.c \
1512 xcoffread.c xcoffsolib.c \
1514 xtensa-tdep.c xtensa-config.c \
1515 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1517 # Some files need explicit build rules (due to -Werror problems) or due
1518 # to sub-directory fun 'n' games.
1520 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1521 # errors. It turns out that that is the least of monitor.c's
1522 # problems. The function print_vsprintf appears to be using
1523 # va_arg(long) to extract CORE_ADDR parameters - something that
1524 # definitly will not work. "monitor.c" needs to be rewritten so that
1525 # it doesn't use format strings and instead uses callbacks.
1526 monitor.o
: $(srcdir)/monitor.c
1527 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1528 $(COMPILE.post
) $(srcdir)/monitor.c
1531 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1532 # checks format strings.
1533 printcmd.o
: $(srcdir)/printcmd.c
1534 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1535 $(COMPILE.post
) $(srcdir)/printcmd.c
1538 # Message files. Based on code in gcc/Makefile.in.
1540 # Rules for generating translated message descriptions. Disabled by
1541 # autoconf if the tools are not available.
1543 .SUFFIXES
: .po .gmo .pox .pot
1544 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1548 # This notation should be acceptable to all Make implementations used
1549 # by people who are interested in updating .po files.
1550 update-po
: $(CATALOGS
:.gmo
=.pox
)
1552 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1555 -test -d po || mkdir po
1556 $(GMSGFMT
) --statistics
-o
$@
$<
1558 # The new .po has to be gone over by hand, so we deposit it into
1559 # build/po with a different extension. If build/po/$(PACKAGE).pot
1560 # exists, use it (it was just created), else use the one in srcdir.
1562 -test -d po || mkdir po
1563 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1564 then echo po/$(PACKAGE).pot; \
1565 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1567 # This rule has to look for .gmo modules in both srcdir and the cwd,
1568 # and has to check that we actually have a catalog for each language,
1569 # in case they weren't built or included with the distribution.
1571 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1572 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1573 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1574 if
[ -f
$$cat ]; then
:; \
1575 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1578 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1579 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1580 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1581 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1582 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1585 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1586 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1587 if
[ -f
$$cat ]; then
:; \
1588 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1591 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1592 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1594 # Delete po/*.gmo only if we are not building in the source directory.
1596 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1598 # Rule for regenerating the message template (gdb.pot). Instead of
1599 # forcing everyone to edit POTFILES.in, which proved impractical, this
1600 # rule has no dependencies and always regenerates gdb.pot. This is
1601 # relatively harmless since the .po files do not directly depend on
1602 # it. The .pot file is left in the build directory. Since GDB's
1603 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1604 # files) force this rule.
1605 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1606 po
/$(PACKAGE
).pot
: force
1607 -test -d po || mkdir po
1608 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1612 # YACC/LEX dependencies
1614 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1615 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1616 # said LANG-exp.c rather than ./c-exp.c some makes would
1617 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1618 # decls for malloc/realloc/free which conflict with everything else.
1619 # Strictly speaking c-exp.c should therefore depend on
1620 # Makefile.in, but that was a pretty big annoyance.
1625 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1626 ||
(rm -f
$@
; false
)
1627 sed
-e
'/extern.*malloc/d' \
1628 -e
'/extern.*realloc/d' \
1629 -e
'/extern.*free/d' \
1630 -e
'/include.*malloc.h/d' \
1631 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1632 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1633 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1634 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1635 -e
'/^#line.*y.tab.c/d' \
1636 -e
"s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
1640 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1641 $(FLEX
) -o
$@
$< && \
1643 sed
-e
'/extern.*malloc/d' \
1644 -e
'/extern.*realloc/d' \
1645 -e
'/extern.*free/d' \
1646 -e
'/include.*malloc.h/d' \
1647 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1648 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1649 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1650 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1651 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1655 elif
[ -f
$@
]; then \
1656 echo
"Warning: $*.c older than $*.l and flex not available."; \
1658 echo
"$@ missing and flex not available."; \
1662 .PRECIOUS
: ada-lex.c
1666 xml-builtin.c
: stamp-xml
; @true
1667 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1668 rm -f xml-builtin.tmp
1670 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1671 xml-builtin.tmp
$(XMLFILES
)
1672 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1673 echo stamp
> stamp-xml
1675 .PRECIOUS
: xml-builtin.c
1678 # gdb/cli/ dependencies
1680 # Need to explicitly specify the compile rule as make will do nothing
1681 # or try to compile the object file into the sub-directory.
1683 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1684 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1687 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1688 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1691 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1692 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1695 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1696 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1699 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1700 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1703 cli-script.o
: $(srcdir)/cli
/cli-script.c
1704 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1707 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1708 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1711 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1712 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1717 # GDBTK sub-directory
1719 # Need to explicitly specify the compile rule as make will do nothing
1720 # or try to compile the object file into the mi directory.
1722 all-gdbtk
: insight
$(EXEEXT
)
1725 transformed_name
=`t='$(program_transform_name)'; \
1726 echo insight | sed -e $$t` ; \
1727 if
test "x$$transformed_name" = x
; then \
1728 transformed_name
=insight
; \
1732 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1733 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1734 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1735 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1736 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1737 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1738 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1739 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1740 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1741 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1742 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1743 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1744 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1745 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1746 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1747 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1748 cd
$(srcdir)/gdbtk
/library
; \
1749 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1751 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1755 transformed_name
=`t='$(program_transform_name)'; \
1756 echo insight | sed -e $$t` ; \
1757 if
test "x$$transformed_name" = x
; then \
1758 transformed_name
=insight
; \
1762 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1763 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1766 rm -f insight
$(EXEEXT
)
1768 # Removing the old gdb first works better if it is running, at least on SunOS.
1769 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1770 $(CDEPS
) $(TDEPLIBS
)
1771 rm -f insight
$(EXEEXT
)
1772 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1773 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1774 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1776 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1777 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1779 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1780 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1782 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1783 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1785 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1786 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1789 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1790 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1793 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1794 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1797 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1798 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1801 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1802 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1805 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1806 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1809 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1810 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
1813 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1814 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
1817 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1818 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
1821 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1822 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
1827 # gdb/mi/ dependencies
1829 # Need to explicitly specify the compile rule as make will do nothing
1830 # or try to compile the object file into the sub-directory.
1832 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
1833 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
1836 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
1837 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
1840 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
1841 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
1844 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
1845 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
1848 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
1849 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
1852 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
1853 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
1856 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
1857 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
1860 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
1861 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
1864 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
1865 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
1868 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
1869 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
1872 mi-console.o
: $(srcdir)/mi
/mi-console.c
1873 $(COMPILE
) $(srcdir)/mi
/mi-console.c
1876 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
1877 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
1880 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
1881 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
1884 mi-main.o
: $(srcdir)/mi
/mi-main.c
1885 $(COMPILE
) $(srcdir)/mi
/mi-main.c
1888 mi-out.o
: $(srcdir)/mi
/mi-out.c
1889 $(COMPILE
) $(srcdir)/mi
/mi-out.c
1892 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
1893 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
1896 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
1897 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
1900 mi-common.o
: $(srcdir)/mi
/mi-common.c
1901 $(COMPILE
) $(srcdir)/mi
/mi-common.c
1904 # gdb/common/ dependencies
1906 # Need to explicitly specify the compile rule as make will do nothing
1907 # or try to compile the object file into the sub-directory.
1909 signals.o
: $(srcdir)/common
/signals.c
1910 $(COMPILE
) $(srcdir)/common
/signals.c
1913 common-utils.o
: ${srcdir}/common
/common-utils.c
1914 $(COMPILE
) $(srcdir)/common
/common-utils.c
1917 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
1918 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
1921 xml-utils.o
: ${srcdir}/common
/xml-utils.c
1922 $(COMPILE
) $(srcdir)/common
/xml-utils.c
1925 ptid.o
: ${srcdir}/common
/ptid.c
1926 $(COMPILE
) $(srcdir)/common
/ptid.c
1929 buffer.o
: ${srcdir}/common
/buffer.c
1930 $(COMPILE
) $(srcdir)/common
/buffer.c
1933 format.o
: ${srcdir}/common
/format.c
1934 $(COMPILE
) $(srcdir)/common
/format.c
1937 linux-osdata.o
: ${srcdir}/common
/linux-osdata.c
1938 $(COMPILE
) $(srcdir)/common
/linux-osdata.c
1941 linux-procfs.o
: $(srcdir)/common
/linux-procfs.c
1942 $(COMPILE
) $(srcdir)/common
/linux-procfs.c
1945 linux-ptrace.o
: $(srcdir)/common
/linux-ptrace.c
1946 $(COMPILE
) $(srcdir)/common
/linux-ptrace.c
1949 common-agent.o
: $(srcdir)/common
/agent.c
1950 $(COMPILE
) $(srcdir)/common
/agent.c
1953 vec.o
: ${srcdir}/common
/vec.c
1954 $(COMPILE
) $(srcdir)/common
/vec.c
1958 # gdb/tui/ dependencies
1960 # Need to explicitly specify the compile rule as make will do nothing
1961 # or try to compile the object file into the sub-directory.
1963 tui.o
: $(srcdir)/tui
/tui.c
1964 $(COMPILE
) $(srcdir)/tui
/tui.c
1967 tui-command.o
: $(srcdir)/tui
/tui-command.c
1968 $(COMPILE
) $(srcdir)/tui
/tui-command.c
1971 tui-data.o
: $(srcdir)/tui
/tui-data.c
1972 $(COMPILE
) $(srcdir)/tui
/tui-data.c
1975 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
1976 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
1979 tui-file.o
: $(srcdir)/tui
/tui-file.c
1980 $(COMPILE
) $(srcdir)/tui
/tui-file.c
1983 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
1984 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
1987 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
1988 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
1991 tui-io.o
: $(srcdir)/tui
/tui-io.c
1992 $(COMPILE
) $(srcdir)/tui
/tui-io.c
1995 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
1996 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
1999 tui-out.o
: $(srcdir)/tui
/tui-out.c
2000 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2003 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2004 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2007 tui-source.o
: $(srcdir)/tui
/tui-source.c
2008 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2011 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2012 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2015 tui-win.o
: $(srcdir)/tui
/tui-win.c
2016 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2019 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2020 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2023 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2024 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2027 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2028 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2032 # gdb/python/ dependencies
2034 # Need to explicitly specify the compile rule as make will do nothing
2035 # or try to compile the object file into the sub-directory.
2037 # Flags needed to compile Python code
2038 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2040 python.o
: $(srcdir)/python
/python.c
2041 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2044 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2045 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2048 py-block.o
: $(srcdir)/python
/py-block.c
2049 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2052 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2053 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2056 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2057 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2060 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2061 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2064 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2065 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2068 py-event.o
: $(srcdir)/python
/py-event.c
2069 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2072 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2073 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2076 py-evts.o
: $(srcdir)/python
/py-evts.c
2077 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2080 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2081 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2084 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2085 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2088 py-frame.o
: $(srcdir)/python
/py-frame.c
2089 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2092 py-function.o
: $(srcdir)/python
/py-function.c
2093 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2096 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2097 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2100 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2101 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2104 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2105 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2108 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2109 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2112 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2113 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2116 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2117 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2120 py-param.o
: $(srcdir)/python
/py-param.c
2121 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2124 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2125 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2128 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2129 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2132 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2133 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2136 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2137 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2140 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2141 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2144 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2145 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2148 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2149 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2152 py-type.o
: $(srcdir)/python
/py-type.c
2153 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2156 py-utils.o
: $(srcdir)/python
/py-utils.c
2157 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2160 py-value.o
: $(srcdir)/python
/py-value.c
2161 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2165 # Dependency tracking. Most of this is conditional on GNU Make being
2166 # found by configure; if GNU Make is not found, we fall back to a
2170 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2171 # Note that we put the dependencies into a .Tpo file, then move them
2172 # into place if the compile succeeds. We need this because gcc does
2173 # not atomically write the dependency output file.
2174 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2175 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2176 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2177 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2179 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2180 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2181 # depcomp handles atomicity for us, so we don't need a postcompile
2183 @GMAKE_TRUE@
override POSTCOMPILE
=
2186 # A list of all the objects we might care about in this build, for
2187 # dependency tracking.
2188 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2189 test-cp-name-parser.o
2191 # Ensure that generated files are created early. Use order-only
2192 # dependencies if available. They require GNU make 3.80 or newer,
2193 # and the .VARIABLES variable was introduced at the same time.
2194 @GMAKE_TRUE@
ifdef .VARIABLES
2195 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2197 $(all_object_files
) : $(generated_files
)
2201 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2203 ### end of the gdb Makefile.in.