1 # Copyright (C) 1989-2014 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 install_sh
= @install_sh@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
62 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
63 INSTALL_DATA
= @INSTALL_DATA@
82 # If you are compiling with GCC, make sure that either 1) You have the
83 # fixed include files where GCC can reach them, or 2) You use the
84 # -traditional flag. Otherwise the ioctl calls in inflow.c
85 # will be incorrectly compiled. The "fixincludes" script in the gcc
86 # distribution will fix your include files up.
89 # Dependency tracking information.
92 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
94 # Note that these are overridden by GNU make-specific code below if
95 # GNU make is used. The overrides implement dependency tracking.
97 COMPILE.post
= -c
-o
$@
98 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
101 # Directory containing source files.
107 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
108 # not defined, but ada-lex.c is present, compilation will continue,
109 # possibly with a warning.
112 YLWRAP
= $(srcdir)/..
/ylwrap
114 # where to find makeinfo, preferably one designed for texinfo-2
115 MAKEINFO
= @MAKEINFO@
116 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
117 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
118 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
120 MAKEHTML
= $(MAKEINFO_CMD
) --html
123 # Set this up with gcc if you have gnu ld and the loader will print out
124 # line numbers for undefined references.
128 # Where is our "include" directory? Typically $(srcdir)/../include.
129 # This is essentially the header file directory for the library
130 # routines in libiberty.
131 INCLUDE_DIR
= $(srcdir)/..
/include
132 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
134 # Where is the "-liberty" library? Typically in ../libiberty.
135 LIBIBERTY
= ..
/libiberty
/libiberty.a
137 # Where is the BFD library? Typically in ../bfd.
139 BFD
= $(BFD_DIR
)/libbfd.a
140 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
141 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
143 # Where is the decnumber library? Typically in ../libdecnumber.
144 LIBDECNUMBER_DIR
= ..
/libdecnumber
145 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
146 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
147 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
149 # Where is the READLINE library? Typically in ../readline.
150 READLINE_DIR
= ..
/readline
151 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
152 READLINE
= @READLINE@
153 READLINE_DEPS
= @READLINE_DEPS@
154 READLINE_CFLAGS
= @READLINE_CFLAGS@
156 # Where is expat? This will be empty if expat was not available.
157 LIBEXPAT
= @LIBEXPAT@
159 # Where is lzma? This will be empty if lzma was not available.
162 # Where is libbabeltrace? This will be empty if lbabeltrace was not
164 LIBBABELTRACE
= @LIBBABELTRACE@
166 WARN_CFLAGS
= @WARN_CFLAGS@
167 WERROR_CFLAGS
= @WERROR_CFLAGS@
168 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
169 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
171 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
172 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
173 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
174 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
176 RDYNAMIC
= @RDYNAMIC@
178 # Where is the INTL library? Typically in ../intl.
180 INTL_DEPS
= @LIBINTL_DEP@
181 INTL_CFLAGS
= @INCINTL@
183 # Did the user give us a --with-gdb-datadir option?
184 GDB_DATADIR
= @GDB_DATADIR@
186 # Flags to pass to gdb when invoked with "make run".
189 # Helper code from gnulib.
190 GNULIB_BUILDDIR
= build-gnulib
191 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
192 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
194 # Generated headers in the gnulib directory. These must be listed
195 # so that they are generated before other files are compiled.
196 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
199 # CLI sub directory definitons
203 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
205 cli-interp.o cli-utils.o
208 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
210 cli
/cli-interp.c cli
/cli-utils.c
216 # MI sub directory definitons
219 mi-out.o mi-console.o \
220 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
221 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
222 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
223 mi-cmd-info.o mi-interp.o \
224 mi-main.o mi-parse.o mi-getopt.o
226 mi
/mi-out.c mi
/mi-console.c \
227 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
228 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
229 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
230 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
231 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
237 # TUI sub directory definitions
274 tui
/tui-wingeneral.c \
275 tui
/tui-winsource.c \
283 # Guile sub directory definitons for guile support.
311 SUBDIR_GUILE_SRCS
= \
314 guile
/scm-auto-load.c \
316 guile
/scm-breakpoint.c \
319 guile
/scm-exception.c \
322 guile
/scm-iterator.c \
323 guile
/scm-lazy-string.c \
324 guile
/scm-objfile.c \
328 guile
/scm-pretty-print.c \
329 guile
/scm-progspace.c \
330 guile
/scm-safe-call.c \
338 SUBDIR_GUILE_LDFLAGS
=
342 # python sub directory definitons
344 SUBDIR_PYTHON_OBS
= \
358 py-finishbreakpoint.o \
367 py-newobjfileevent.o \
382 SUBDIR_PYTHON_SRCS
= \
385 python
/py-auto-load.c \
387 python
/py-bpevent.c \
388 python
/py-breakpoint.c \
390 python
/py-continueevent.c \
391 python
/py-xmethods.c \
393 python
/py-evtregistry.c \
395 python
/py-exitedevent.c \
396 python
/py-finishbreakpoint.c \
398 python
/py-framefilter.c \
399 python
/py-function.c \
400 python
/py-gdb-readline.c \
401 python
/py-inferior.c \
402 python
/py-infthread.c \
403 python
/py-lazy-string.c \
404 python
/py-linetable.c \
405 python
/py-newobjfileevent.c \
406 python
/py-objfile.c \
408 python
/py-prettyprint.c \
409 python
/py-progspace.c \
410 python
/py-signalevent.c \
411 python
/py-stopevent.c \
414 python
/py-threadevent.c \
420 SUBDIR_PYTHON_LDFLAGS
=
421 SUBDIR_PYTHON_CFLAGS
=
423 # Opcodes currently live in one of two places. Either they are in the
424 # opcode library, typically ../opcodes, or they are in a header file
426 # Where is the "-lopcodes" library, with (some of) the opcode tables and
428 OPCODES_DIR
= ..
/opcodes
429 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
430 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
431 # Where are the other opcode tables which only have header file
433 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
434 # Some source files like to use #include "opcodes/file.h"
435 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
437 # The simulator is usually nonexistent; targets that include one
438 # should set this to list all the .o or .a files to be linked in.
441 WIN32LIBS
= @WIN32LIBS@
443 # Tcl et al cflags and libraries
445 TCL_CFLAGS
= @TCL_INCLUDE@
446 GDBTKLIBS
= @GDBTKLIBS@
447 # Extra flags that the GDBTK files need:
448 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
451 TK_CFLAGS
= @TK_INCLUDE@
453 X11_CFLAGS
= @TK_XINCLUDES@
457 WIN32LDAPP
= @WIN32LDAPP@
460 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
461 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
463 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
465 # The version of gdbtk we're building. This should be kept
466 # in sync with GDBTK_VERSION and friends in gdbtk.h.
468 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
470 # Gdbtk requires an absolute path to the source directory or
471 # the testsuite won't run properly.
472 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
475 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
476 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
477 SUBDIR_GDBTK_SRCS
= \
478 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
479 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
480 gdbtk
/generic
/gdbtk-interp.c \
481 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
482 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
483 gdbtk
/generic
/gdbtk-main.c
484 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
485 SUBDIR_GDBTK_LDFLAGS
=
486 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
488 CONFIG_OBS
= @CONFIG_OBS@
489 CONFIG_SRCS
= @CONFIG_SRCS@
490 CONFIG_DEPS
= @CONFIG_DEPS@
491 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
492 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
493 CONFIG_ALL
= @CONFIG_ALL@
494 CONFIG_CLEAN
= @CONFIG_CLEAN@
495 CONFIG_INSTALL
= @CONFIG_INSTALL@
496 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
497 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
499 # -I. for config files.
500 # -I$(srcdir) for gdb internal headers.
501 # -I$(srcdir)/config for more generic config files.
503 # It is also possible that you will need to add -I/usr/include/sys if
504 # your system doesn't have fcntl.h in /usr/include (which is where it
505 # should be according to Posix).
507 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
508 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
510 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
511 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
513 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
515 # CFLAGS is specifically reserved for setting from the command line
516 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
519 # Set by configure, for e.g. expat. Python installations are such that
520 # C headers are included using their basename (for example, we #include
521 # <Python.h> rather than, say, <python/Python.h>). Since the file names
522 # are sometimes a little generic, we think that the risk of collision
523 # with other header files is high. If that happens, we try to mitigate
524 # a bit the consequences by putting the Python includes last in the list.
525 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
527 # Need to pass this to testsuite for "make check". Probably should be
528 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
529 # so "make check" has the same result no matter where it is run.
532 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
533 INTERNAL_CFLAGS_BASE
= \
534 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
535 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
536 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
537 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
538 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
539 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
541 # LDFLAGS is specifically reserved for setting from the command line
545 # Profiling options need to go here to work.
546 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
547 # and have it work; that's why CFLAGS is here.
548 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
549 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
551 # If your system is missing alloca(), or, more likely, it's there but
552 # it doesn't work, then refer to libiberty.
554 # Libraries and corresponding dependencies for compiling gdb.
555 # XM_CLIBS, defined in *config files, have host-dependent libs.
556 # LIBIBERTY appears twice on purpose.
557 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
558 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
559 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
560 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) \
561 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
562 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
563 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
565 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
566 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
571 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
572 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
578 # XML files to build in to GDB.
579 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
580 $(srcdir)/features
/library-list.dtd \
581 $(srcdir)/features
/library-list-aix.dtd \
582 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
583 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
584 $(srcdir)/features
/btrace.dtd
586 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
587 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
588 # etc., then there will be (as part of the C library or perhaps as
589 # part of libiberty) a POSIX interface. But at least for now the
590 # host-dependent makefile fragment might need to use something else
592 SER_HARDWIRE
= @SER_HARDWIRE@
594 # The `remote' debugging target is supported for most architectures,
595 # but not all (e.g. 960)
596 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
597 remote-notif.o ctf.o tracefile.o tracefile-tfile.o
599 # This is remote-sim.o if a simulator is to be linked in.
602 # Target-dependent object files.
603 TARGET_OBS
= @TARGET_OBS@
605 # All target-dependent objects files that require 64-bit CORE_ADDR
606 # (used with --enable-targets=all --enable-64-bit-bfd).
607 ALL_64_TARGET_OBS
= \
608 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
609 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
610 alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
611 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
612 amd64-linux-tdep.o amd64nbsd-tdep.o \
613 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
614 ia64-hpux-tdep.o ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
616 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
617 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
619 # All other target-dependent objects files (used with --enable-targets=all).
621 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
622 armnbsd-tdep.o armobsd-tdep.o \
623 arm-tdep.o arm-wince-tdep.o \
625 bfin-linux-tdep.o bfin-tdep.o \
626 cris-linux-tdep.o cris-tdep.o \
628 frv-linux-tdep.o frv-tdep.o \
630 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
631 hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
632 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
633 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
634 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
635 i386-dicos-tdep.o i386-darwin-tdep.o \
640 m32r-linux-tdep.o m32r-tdep.o \
642 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
645 microblaze-tdep.o microblaze-linux-tdep.o \
646 mips-irix-tdep.o mips-linux-tdep.o \
647 mipsnbsd-tdep.o mips-tdep.o \
648 mn10300-linux-tdep.o mn10300-tdep.o \
652 nios2-tdep.o nios2-linux-tdep.o \
654 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
655 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
656 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
657 rs6000-lynx178-tdep.o \
661 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
662 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
663 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
664 spu-tdep.o spu-multiarch.o solib-spu.o \
665 tic6x-tdep.o tic6x-linux-tdep.o \
666 tilegx-tdep.o tilegx-linux-tdep.o \
668 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
670 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
673 nbsd-tdep.o obsd-tdep.o \
675 solib-frv.o solib-irix.o solib-svr4.o \
676 solib-som.o solib-pa64.o solib-darwin.o solib-dsbt.o \
677 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
678 remote-m32r-sdi.o remote-mips.o \
685 # Host-dependent makefile fragment comes in here.
687 # End of host-dependent makefile fragment
691 "exec_prefix=$(exec_prefix)" \
692 "infodir=$(infodir)" \
693 "datarootdir=$(datarootdir)" \
695 "htmldir=$(htmldir)" \
699 "datadir=$(datadir)" \
700 "includedir=$(includedir)" \
701 "against=$(against)" \
702 "DESTDIR=$(DESTDIR)" \
704 "AR_FLAGS=$(AR_FLAGS)" \
708 "CXXFLAGS=$(CXXFLAGS)" \
709 "DLLTOOL=$(DLLTOOL)" \
710 "LDFLAGS=$(LDFLAGS)" \
712 "MAKEINFO=$(MAKEINFO)" \
713 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
714 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
715 "MAKEHTML=$(MAKEHTML)" \
716 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
717 "INSTALL=$(INSTALL)" \
718 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
719 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
720 "INSTALL_DATA=$(INSTALL_DATA)" \
721 "RUNTEST=$(RUNTEST)" \
722 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
724 # Flags that we pass when building the testsuite.
726 # empty for native, $(target_alias)/ for cross
727 target_subdir
= @target_subdir@
730 if [ -f $${rootme}/../gcc/xgcc ] ; then \
731 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
732 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
734 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
737 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
740 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
746 if [ -f $${rootme}/../gcc/xgcc ] ; then \
747 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
748 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
750 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
753 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
756 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
760 # The use of $$(x_FOR_TARGET) reduces the command line length by not
761 # duplicating the lengthy definition.
762 TARGET_FLAGS_TO_PASS
= \
764 "exec_prefix=$(exec_prefix)" \
765 "against=$(against)" \
766 'CC=$$(CC_FOR_TARGET)' \
767 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
769 'CXX=$$(CXX_FOR_TARGET)' \
770 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
771 "CXXFLAGS=$(CXXFLAGS)" \
772 "INSTALL=$(INSTALL)" \
773 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
774 "INSTALL_DATA=$(INSTALL_DATA)" \
775 "MAKEINFO=$(MAKEINFO)" \
776 "MAKEHTML=$(MAKEHTML)" \
777 "RUNTEST=$(RUNTEST)" \
778 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
779 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
782 # All source files that go into linking GDB.
783 # Links made at configuration time should not be specified here, since
784 # SFILES is used in building the distribution archive.
786 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
788 addrmap.c auto-load.c \
789 auxv.c ax-general.c ax-gdb.c \
793 block.c blockframe.c \
794 breakpoint.c break-catch-sig.c break-catch-throw.c \
795 build-id.c buildsym.c \
796 c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
797 charset.c cleanups.c cli-out.c coffread.c coff-pe-read.c \
798 complaints.c completer.c continuations.c corefile.c corelow.c \
799 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
800 d-exp.y d-lang.c d-support.c d-valprint.c \
802 dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
803 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
804 dwarf2-frame-tailcall.c \
805 elfread.c environ.c eval.c event-loop.c event-top.c \
806 exceptions.c expprint.c extension.c \
807 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
808 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
809 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
810 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
811 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
814 infcmd.c inflow.c infrun.c \
817 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
818 language.c linespec.c minidebug.c \
819 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
820 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
821 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
822 memrange.c mi
/mi-common.c \
824 objfiles.c osabi.c observer.c osdata.c \
826 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
827 proc-service.list progspace.c \
828 prologue-value.c psymtab.c \
829 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
831 serial.c ser-base.c ser-unix.c skip.c \
832 solib.c solib-target.c source.c \
833 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
834 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
835 target.c target-dcache.c target-descriptions.c target-memory.c \
836 thread.c top.c tracepoint.c \
840 ui-out.c utils.c ui-file.h ui-file.c \
842 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
843 xml-tdesc.c xml-support.c \
844 inferior.c gdb_usleep.c \
845 record.c record-full.c gcore.c \
848 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
849 sol-thread.c windows-termcap.c \
850 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
851 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
852 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
853 target
/waitstatus.c common
/print-utils.c common
/rsp-low.c \
854 common
/errors.c common
/common-debug.c
856 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
858 # Header files that need to have srcdir added. Note that in the cases
859 # where we use a macro like $(gdbcmd_h), things are carefully arranged
860 # so that each .h file is listed exactly once (M-x tags-search works
861 # wrong if TAGS has files twice). Because this is tricky to get
862 # right, it is probably easiest just to list .h files here directly.
865 common
/gdb_signals.h nat
/gdb_thread_db.h common
/gdb_vecs.h \
866 common
/i386-xstate.h nat
/linux-ptrace.h nat
/mips-linux-watch.h \
867 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
868 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
869 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h amd64bsd-nat.h \
870 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
871 ia64-tdep.h ada-lang.h ada-varobj.h varobj.h varobj-iter.h frv-tdep.h \
872 nto-tdep.h serial.h \
873 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
874 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
875 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
876 gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
877 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
878 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
879 amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
880 gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
881 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
882 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
883 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
884 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
885 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
886 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h inf-ttrace.h \
887 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
888 m2-lang.h stack.h charset.h cleanups.h addrmap.h command.h solist.h source.h \
889 target.h target-dcache.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
890 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
891 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
892 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
893 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
894 expression.h score-tdep.h gdb_select.h ser-tcp.h \
895 extension.h extension-priv.h \
896 build-id.h buildsym.h valprint.h \
897 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
898 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
899 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
900 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
901 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
902 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
903 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
904 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
905 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
906 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
907 rs6000-tdep.h rs6000-aix-tdep.h \
908 common
/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
909 language.h nbsd-tdep.h solib-svr4.h \
910 macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
911 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
912 regformats
/regdef.h config
/alpha
/nm-osf3.h config
/i386
/nm-i386gnu.h \
913 config
/i386
/nm-fbsd.h \
914 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
915 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
916 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
917 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
918 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
919 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
920 psymtab.h psympriv.h progspace.h bfin-tdep.h ia64-hpux-tdep.h \
921 amd64-darwin-tdep.h charset-list.h \
922 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
923 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
924 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
925 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
926 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
927 record-full.h solib-aix.h \
928 solib-darwin.h solib-ia64-hpux.h solib-spu.h windows-nat.h xcoffread.h \
929 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
930 gnulib
/import
/extra
/snippet
/warn-on-use.h \
931 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
932 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
933 common
/format.h common
/host-defs.h utils.h common
/queue.h \
934 nat
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
935 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat
/linux-btrace.h \
936 ctf.h nat
/i386-cpuid.h nat
/i386-gcc-cpuid.h target
/resume.h \
937 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h \
938 common
/print-utils.h common
/rsp-low.h nat
/i386-dregs.h x86-linux-nat.h \
939 i386-linux-nat.h common
/common-defs.h common
/errors.h common
/common-types.h \
940 common
/common-debug.h
942 # Header files that already have srcdir in them, or which are in objdir.
944 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
947 # GDB "info" files, which should be included in their entirety
948 INFOFILES
= gdb.
info*
950 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
952 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
953 # default their values the way we do for SER_HARDWIRE; in the future
954 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
955 # variables analogous to SER_HARDWIRE which get defaulted in this
958 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
959 $(REMOTE_OBS
) $(SIM_OBS
)
961 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
962 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
963 # and it's more useful to see it in the .y file.
964 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
966 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
968 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
975 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
976 findvar.o regcache.o cleanups.o \
977 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
978 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
979 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
980 linespec.o dictionary.o \
983 expprint.o environ.o stack.o thread.o \
992 macrotab.o macrocmd.o macroexp.o macroscope.o \
994 event-loop.o event-top.o inf-loop.o completer.o \
995 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
997 memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
998 build-id.o buildsym.o \
1003 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
1004 dbxread.o coffread.o coff-pe-read.o \
1005 dwarf2read.o mipsread.o stabsread.o corefile.o \
1006 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
1007 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
1008 ada-tasks.o ada-varobj.o c-varobj.o \
1009 ui-out.o cli-out.o \
1011 go-lang.o go-valprint.o go-typeprint.o \
1012 jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
1013 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
1015 complaints.o typeprint.o \
1016 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
1017 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
1019 serial.o mdebugread.o top.o utils.o \
1022 frame.o frame-unwind.o doublest.o \
1025 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
1031 solib.o solib-target.o \
1032 prologue-value.o memory-map.o memrange.o \
1033 xml-support.o xml-syscall.o xml-utils.o \
1034 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
1035 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
1036 gdb_vecs.o jit.o progspace.o skip.o probe.o \
1037 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
1038 format.o registry.o btrace.o record-btrace.o waitstatus.o \
1039 print-utils.o rsp-low.o errors.o common-debug.o debug.o
1043 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1044 CLEANDIRS
= $(SUBDIRS
)
1046 # List of subdirectories in the build tree that must exist.
1047 # This is used to force build failures in existing trees when
1048 # a new directory is added.
1049 # The format here is for the `case' shell command.
1050 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1052 # For now, shortcut the "configure GDB for fewer languages" stuff.
1058 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1063 d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
1065 # Things which need to be built when making a distribution.
1067 DISTSTUFF
= $(YYFILES
)
1070 # All generated files which can be included by another file.
1071 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
1072 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
1078 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1079 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1083 # The check target can not use subdir_do, because subdir_do does not
1084 # use TARGET_FLAGS_TO_PASS.
1086 @if
[ -f testsuite
/Makefile
]; then \
1087 rootme
=`pwd`; export rootme
; \
1088 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1090 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1094 @if
[ -f testsuite
/Makefile
]; then \
1095 rootme
=`pwd`; export rootme
; \
1096 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1098 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1101 # The idea is to parallelize testing of multilibs, for example:
1102 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1103 # will run 3 concurrent sessions of check, eventually testing all 10
1104 # combinations. GNU make is required for the % pattern to work, as is
1105 # a shell that expands alternations within braces. If GNU make is not
1106 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1107 # prevent serialized checking due to the passed RUNTESTFLAGS.
1108 # FIXME: use config.status --config not --version, when available.
1110 @if
[ -f testsuite
/config.status
]; then \
1111 rootme
=`pwd`; export rootme
; \
1112 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1113 target
=`echo "$@" | sed 's,//.*,,'`; \
1114 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1115 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1116 testdir
=testsuite.
$$vardots; \
1117 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1118 configargs
=`cd testsuite && ./config.status --version | \
1119 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1120 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1122 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1123 "\"--srcdir=\$$rootsrc/testsuite\"" \
1125 else :; fi
&& cd
$$testdir && \
1126 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1127 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1128 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1132 # The set of headers checked by 'check-headers' by default.
1133 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1135 # Try to compile each header in isolation, thus ensuring headers are
1138 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1142 # make check-headers CHECK_HEADERS="header.h list.h"
1144 # to check specific headers.
1147 @echo Checking headers.
1148 for i in
$(CHECK_HEADERS
) ; do \
1149 $(CC
) -x c
-c
-fsyntax-only
$(INTERNAL_CFLAGS
) \
1150 -include defs.h
$(srcdir)/$$i ; \
1152 .PHONY
: check-headers
1154 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1155 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1157 # Traditionally "install" depends on "all". But it may be useful
1158 # not to; for example, if the user has made some trivial change to a
1159 # source file and doesn't care about rebuilding or just wants to save the
1160 # time it takes for make to check that all is up to date.
1161 # install-only is intended to address that need.
1163 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1165 install-only
: $(CONFIG_INSTALL
)
1166 transformed_name
=`t='$(program_transform_name)'; \
1167 echo gdb | sed -e "$$t"` ; \
1168 if
test "x$$transformed_name" = x
; then \
1169 transformed_name
=gdb
; \
1173 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1174 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1175 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1176 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1177 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1178 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1180 transformed_name
=`t='$(program_transform_name)'; \
1181 echo gcore | sed -e "$$t"` ; \
1182 if
test "x$$transformed_name" = x
; then \
1183 transformed_name
=gcore
; \
1187 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1188 $(INSTALL_SCRIPT
) gcore \
1189 $(DESTDIR
)$(bindir)/$$transformed_name; \
1191 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1194 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1195 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1196 `test -z '$(STRIP)' || \
1197 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1200 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1203 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1205 uninstall: force $(CONFIG_UNINSTALL
)
1206 transformed_name
=`t='$(program_transform_name)'; \
1207 echo gdb | sed -e $$t` ; \
1208 if
test "x$$transformed_name" = x
; then \
1209 transformed_name
=gdb
; \
1213 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1214 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1215 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1217 transformed_name
=`t='$(program_transform_name)'; \
1218 echo gcore | sed -e "$$t"` ; \
1219 if
test "x$$transformed_name" = x
; then \
1220 transformed_name
=gcore
; \
1224 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1226 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1228 # The C++ name parser can be built standalone for testing.
1229 test-cp-name-parser.o
: cp-name-parser.c
1230 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1233 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1234 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1235 test-cp-name-parser.o
$(LIBIBERTY
)
1237 # We do this by grepping through sources. If that turns out to be too slow,
1238 # maybe we could just require every .o file to have an initialization routine
1239 # of a given name (top.o -> _initialize_top, etc.).
1241 # Formatting conventions: The name of the _initialize_* routines must start
1242 # in column zero, and must not be inside #if.
1244 # Note that the set of files with init functions might change, or the names
1245 # of the functions might change, so this files needs to depend on all the
1246 # object files that will be linked into gdb.
1248 # FIXME: There is a problem with this approach - init.c may force
1249 # unnecessary files to be linked in.
1251 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1252 # the first call is to _initialize_gdbtypes (implemented by explicitly
1253 # putting that function's name first in the init.l-tmp file). This is
1254 # a hack to ensure that all the architecture dependant global
1255 # builtin_type_* variables are initialized before anything else
1256 # (per-architecture code is called in the same order that it is
1257 # registered). The ``correct fix'' is to have all the builtin types
1258 # made part of the architecture and initialize them on-demand (using
1259 # gdbarch_data) just like everything else. The catch is that other
1260 # modules still take the address of these builtin types forcing them
1261 # to be variables, sigh!
1263 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1264 # anchored on the first column and excludes the ``/'' character so
1265 # that it doesn't add the $(srcdir) prefix to any file that already
1266 # has an absolute path. It turns out that $(DEC)'s True64 make
1267 # automatically adds the $(srcdir) prefixes when it encounters files
1268 # in sub-directories such as cli/ and mi/.
1270 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1271 # duplicates. Files in the gdb/ directory can end up appearing in
1272 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1274 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
)
1275 init.c
: $(INIT_FILES
)
1277 @
rm -f init.c-tmp init.l-tmp
1279 @echo gdbtypes
> init.l-tmp
1280 @
-LANG
=C
; export LANG
; \
1281 LC_ALL
=C
; export LC_ALL
; \
1282 echo
$(INIT_FILES
) | \
1285 -e
'/^gdbtypes.[co]$$/d' \
1286 -e
'/^init.[co]$$/d' \
1287 -e
'/xdr_ld.[co]$$/d' \
1288 -e
'/xdr_ptrace.[co]$$/d' \
1289 -e
'/xdr_rdb.[co]$$/d' \
1290 -e
'/udr.[co]$$/d' \
1291 -e
'/udip2soc.[co]$$/d' \
1292 -e
'/udi2go32.[co]$$/d' \
1293 -e
'/version.[co]$$/d' \
1294 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1295 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1296 -e
's/\.[co]$$/.c/' \
1297 -e
's,signals\.c,common/signals\.c,' \
1298 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1300 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1305 * ) echo
$$f ; fs
="$$fs $$f";; \
1308 @echo
'/* Do not modify this file. */' >>init.c-tmp
1309 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1310 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1311 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1312 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1313 @echo
'void' >>init.c-tmp
1314 @echo
'initialize_all_files (void)' >>init.c-tmp
1315 @echo
'{' >>init.c-tmp
1316 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1317 @echo
'}' >>init.c-tmp
1319 @mv init.c-tmp init.c
1323 # Create a library of the gdb object files and build GDB by linking
1326 # init.o is very important. It pulls in the rest of GDB.
1327 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1328 libgdb.a
: $(LIBGDB_OBS
)
1330 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1333 # Removing the old gdb first works better if it is running, at least on SunOS.
1334 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1336 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1337 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1338 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1340 # Convenience rule to handle recursion.
1341 $(LIBGNU
) $(GNULIB_H
): all-lib
1342 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1343 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1346 # Convenience rule to handle recursion.
1347 .PHONY
: all-data-directory
1348 all-data-directory
: data-directory
/Makefile
1349 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1351 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1352 # on itself without copying the executable. So "make gdb1" will make
1353 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1354 # Removing gdb1 before the copy is the right thing if gdb1 is open
1355 # in another process.
1356 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1358 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1360 # Put the proper machine-specific files first, so M-. on a machine
1361 # specific routine gets the one for the correct machine. (FIXME: those
1362 # files go in twice; we should be removing them from the main list).
1364 # TAGS depends on all the files that go into it so you can rebuild TAGS
1365 # with `make TAGS' and not have to say `rm TAGS' first.
1367 GDB_NM_FILE
= @GDB_NM_FILE@
1368 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1370 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1371 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1372 echo $(srcdir)/$$i ; \
1373 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1375 done) | sed -e 's/\.o$$/\.c/'` \
1376 `find $(srcdir)/config -name '*.h' -print`
1380 clean mostlyclean: $(CONFIG_CLEAN
)
1381 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1382 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1383 rm -f init.c version.c observer.h observer.inc
1384 rm -f gdb
$(EXEEXT
) core make.log
1385 rm -f gdb
[0-9]$(EXEEXT
)
1386 rm -f test-cp-name-parser
$(EXEEXT
)
1387 rm -f xml-builtin.c stamp-xml
1390 # This used to depend on c-exp.c m2-exp.c TAGS
1391 # I believe this is wrong; the makefile standards for distclean just
1392 # describe removing files; the only sort of "re-create a distribution"
1393 # functionality described is if the distributed files are unmodified.
1394 # NB: While GDBSERVER might be configured on native systems, it isn't
1395 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1397 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1398 rm -rf
$(GNULIB_BUILDDIR
)
1399 rm -f gdbserver
/config.status gdbserver
/config.log
1400 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1401 rm -f gdbserver
/Makefile gdbserver
/config.cache
1402 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1403 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1404 rm -f config.log config.cache
1408 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1409 realclean: maintainer-clean
1411 local-maintainer-clean
:
1412 @echo
"This command is intended for maintainers to use;"
1413 @echo
"it deletes files that may require special tools to rebuild."
1416 ada-lex.c ada-exp.c \
1418 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1419 rm -f TAGS
$(INFOFILES
)
1421 rm -f nm.h config.status
1423 do-maintainer-clean
:
1424 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1427 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1428 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1431 @for i in
$(DODIRS
); do \
1433 $(REQUIRED_SUBDIRS
)) \
1434 if
[ ! -f .
/$$i/Makefile
] ; then \
1435 echo
"Missing $$i/Makefile" >&2 ; \
1439 if
[ -f .
/$$i/Makefile
] ; then \
1441 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1442 else exit
1 ; fi
; \
1446 Makefile
: Makefile.in config.status @frags@
1447 # Regenerate the Makefile and the tm.h / nm.h links.
1448 CONFIG_FILES
="Makefile" \
1451 $(SHELL
) config.status
1453 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1454 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1455 CONFIG_COMMANDS
="depfiles" \
1458 $(SHELL
) config.status
1460 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1461 CONFIG_FILES
="data-directory/Makefile" \
1462 CONFIG_COMMANDS
="depfiles" \
1465 $(SHELL
) config.status
1469 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
1471 jit-reader.h
: $(srcdir)/jit-reader.in
1472 $(SHELL
) config.status
$@
1474 gcore
: $(srcdir)/gcore.in
1475 $(SHELL
) config.status
$@
1477 config.h
: stamp-h
; @true
1478 stamp-h
: $(srcdir)/config.in config.status
1479 CONFIG_HEADERS
=config.h
:config.in \
1480 CONFIG_COMMANDS
="default depdir" \
1483 $(SHELL
) config.status
1485 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
1486 $(SHELL
) config.status
--recheck
1489 ACLOCAL_AMFLAGS
= -I ..
/config
1491 # Keep these in sync with the includes in acinclude.m4.
1494 acx_configure_dir.m4 \
1497 ..
/config
/acinclude.m4 \
1498 ..
/config
/plugins.m4 \
1499 ..
/config
/lead-dot.m4 \
1500 ..
/config
/override.m4 \
1501 ..
/config
/largefile.m4 \
1502 ..
/config
/gettext-sister.m4 \
1503 ..
/config
/lib-ld.m4 \
1504 ..
/config
/lib-prefix.m4 \
1505 ..
/config
/lib-link.m4 \
1508 ..
/config
/depstand.m4 \
1509 ..
/config
/lcmessage.m4 \
1510 ..
/config
/codeset.m4 \
1513 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1514 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1517 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1518 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1519 cd
$(srcdir) && $(AUTOCONF
)
1521 AUTOHEADER
= autoheader
1522 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1523 cd
$(srcdir) && $(AUTOHEADER
)
1527 # automatic rebuilding in automake-generated Makefiles requires
1528 # this rule in the toplevel Makefile, which, with GNU make, causes
1529 # the desired updates through the implicit regeneration of the Makefile
1530 # and all of its prerequisites.
1537 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1539 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1541 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1543 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1545 # GDB MANUAL: TeX dvi file
1547 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1549 # GDB MANUAL: info file
1551 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1553 # Make copying.c from COPYING
1554 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1555 awk
-f
$(srcdir)/copying.awk \
1556 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1557 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1559 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1560 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1561 $(host_alias
) $(target_alias
) version.c
1563 observer.h
: observer.sh doc
/observer.texi
1564 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1566 observer.inc
: observer.sh doc
/observer.texi
1567 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1570 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1571 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1573 gdb.cxref
: $(SFILES
)
1574 cxref
-I.
$(SFILES
) >gdb.cxref
1578 # GNU Make has an annoying habit of putting *all* the Makefile variables
1579 # into the environment, unless you include this target as a circumvention.
1580 # Rumor is that this will be fixed (and this target can be removed)
1584 # GNU Make 3.63 has a different problem: it keeps tacking command line
1585 # overrides onto the definition of $(MAKE). This variable setting
1590 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1591 aarch64-linux-nat.c \
1593 alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1594 alpha-tdep.c alpha-mdebug-tdep.c \
1595 alpha-linux-tdep.c alpha-osf1-tdep.c \
1596 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1597 amd64-nat.c amd64-tdep.c \
1598 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1599 amd64nbsd-nat.c amd64nbsd-tdep.c \
1600 amd64obsd-nat.c amd64obsd-tdep.c \
1601 amd64-darwin-tdep.c \
1602 amd64-dicos-tdep.c \
1603 amd64-linux-nat.c amd64-linux-tdep.c \
1605 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1606 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1608 bfin-linux-tdep.c bfin-tdep.c \
1609 bsd-uthread.c bsd-kvm.c \
1611 dcache.c dicos-tdep.c darwin-nat.c \
1616 go32-nat.c h8300-tdep.c \
1617 hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1618 hppa-linux-tdep.c hppa-linux-nat.c \
1619 hppabsd-nat.c hppabsd-tdep.c \
1621 hppanbsd-nat.c hppanbsd-tdep.c \
1622 i386-tdep.c i386-linux-nat.c \
1623 i386v4-nat.c i386-cygwin-tdep.c \
1624 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1625 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1627 i386-darwin-tdep.c i386-darwin-nat.c \
1629 i386-linux-tdep.c i386-nat.c \
1630 i386-sol2-nat.c i386-sol2-tdep.c \
1631 i386gnu-nat.c i386gnu-tdep.c \
1632 ia64-hpux-nat.c ia64-hpux-tdep.c \
1633 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1634 inf-ptrace.c inf-ttrace.c \
1636 ia64-libunwind-tdep.c \
1643 m32r-linux-nat.c m32r-linux-tdep.c \
1645 m68kbsd-nat.c m68kbsd-tdep.c \
1646 m68klinux-nat.c m68klinux-tdep.c \
1647 m88k-tdep.c m88kbsd-nat.c \
1648 microblaze-tdep.c microblaze-linux-tdep.c \
1650 mips-linux-nat.c mips-linux-tdep.c \
1653 mipsnbsd-nat.c mipsnbsd-tdep.c \
1654 mips64obsd-nat.c mips64obsd-tdep.c \
1656 nios2-tdep.c nios2-linux-tdep.c \
1657 nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
1659 somread.c solib-som.c \
1661 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1662 ppcfbsd-nat.c ppcfbsd-tdep.c \
1663 ppcnbsd-nat.c ppcnbsd-tdep.c \
1664 ppcobsd-nat.c ppcobsd-tdep.c \
1666 ravenscar-thread.c \
1667 remote-m32r-sdi.c remote-mips.c \
1671 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1672 rs6000-lynx178-tdep.c \
1674 s390-linux-tdep.c s390-linux-nat.c \
1676 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1677 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1679 solib-irix.c solib-svr4.c \
1680 sparc-linux-nat.c sparc-linux-tdep.c \
1681 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1682 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1683 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1684 sparc64nbsd-nat.c sparc64nbsd-tdep.c \
1685 sparc64obsd-nat.c sparc64obsd-tdep.c \
1686 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1687 sparc-ravenscar-thread.c \
1688 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1689 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1691 vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1692 windows-nat.c windows-tdep.c \
1695 xtensa-tdep.c xtensa-config.c \
1696 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1698 # Some files need explicit build rules (due to -Werror problems) or due
1699 # to sub-directory fun 'n' games.
1701 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1702 # errors. It turns out that that is the least of monitor.c's
1703 # problems. The function print_vsprintf appears to be using
1704 # va_arg(long) to extract CORE_ADDR parameters - something that
1705 # definitly will not work. "monitor.c" needs to be rewritten so that
1706 # it doesn't use format strings and instead uses callbacks.
1707 monitor.o
: $(srcdir)/monitor.c
1708 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1709 $(COMPILE.post
) $(srcdir)/monitor.c
1712 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1713 # checks format strings.
1714 printcmd.o
: $(srcdir)/printcmd.c
1715 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1716 $(COMPILE.post
) $(srcdir)/printcmd.c
1719 # ada-exp.c can appear in srcdir, for releases; or in ., for
1720 # development builds.
1721 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1723 # Some versions of flex give output that triggers
1724 # -Wold-style-definition.
1725 ada-exp.o
: ada-exp.c
1726 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1727 $(COMPILE.post
) $(ADA_EXP_C
)
1730 # Message files. Based on code in gcc/Makefile.in.
1732 # Rules for generating translated message descriptions. Disabled by
1733 # autoconf if the tools are not available.
1735 .SUFFIXES
: .po .gmo .pox .pot
1736 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1740 # This notation should be acceptable to all Make implementations used
1741 # by people who are interested in updating .po files.
1742 update-po
: $(CATALOGS
:.gmo
=.pox
)
1744 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1747 -test -d po || mkdir po
1748 $(GMSGFMT
) --statistics
-o
$@
$<
1750 # The new .po has to be gone over by hand, so we deposit it into
1751 # build/po with a different extension. If build/po/$(PACKAGE).pot
1752 # exists, use it (it was just created), else use the one in srcdir.
1754 -test -d po || mkdir po
1755 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1756 then echo po/$(PACKAGE).pot; \
1757 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1759 # This rule has to look for .gmo modules in both srcdir and the cwd,
1760 # and has to check that we actually have a catalog for each language,
1761 # in case they weren't built or included with the distribution.
1763 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1764 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1765 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1766 if
[ -f
$$cat ]; then
:; \
1767 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1770 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1771 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1772 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1773 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1774 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1777 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1778 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1779 if
[ -f
$$cat ]; then
:; \
1780 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1783 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1784 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1786 # Delete po/*.gmo only if we are not building in the source directory.
1788 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1790 # Rule for regenerating the message template (gdb.pot). Instead of
1791 # forcing everyone to edit POTFILES.in, which proved impractical, this
1792 # rule has no dependencies and always regenerates gdb.pot. This is
1793 # relatively harmless since the .po files do not directly depend on
1794 # it. The .pot file is left in the build directory. Since GDB's
1795 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1796 # files) force this rule.
1797 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1798 po
/$(PACKAGE
).pot
: force
1799 -test -d po || mkdir po
1800 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1804 # YACC/LEX dependencies
1806 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1807 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1808 # said LANG-exp.c rather than ./c-exp.c some makes would
1809 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1810 # decls for malloc/realloc/free which conflict with everything else.
1811 # Strictly speaking c-exp.c should therefore depend on
1812 # Makefile.in, but that was a pretty big annoyance.
1817 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1818 ||
(rm -f
$@
; false
)
1819 sed
-e
'/extern.*malloc/d' \
1820 -e
'/extern.*realloc/d' \
1821 -e
'/extern.*free/d' \
1822 -e
'/include.*malloc.h/d' \
1823 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1824 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1825 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1826 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1827 -e
'/^#line.*y.tab.c/d' \
1828 -e
"s/^\(#line.*\)`basename $<`/\1`echo $<|sed 's/\//\\\\\//g'`/" \
1832 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1833 $(FLEX
) -o
$@
$< && \
1835 sed
-e
'/extern.*malloc/d' \
1836 -e
'/extern.*realloc/d' \
1837 -e
'/extern.*free/d' \
1838 -e
'/include.*malloc.h/d' \
1839 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1840 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1841 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1842 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1843 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1847 elif
[ -f
$@
]; then \
1848 echo
"Warning: $*.c older than $*.l and flex not available."; \
1850 echo
"$@ missing and flex not available."; \
1854 .PRECIOUS
: ada-lex.c
1858 xml-builtin.c
: stamp-xml
; @true
1859 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1860 rm -f xml-builtin.tmp
1862 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1863 xml-builtin.tmp
$(XMLFILES
)
1864 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1865 echo stamp
> stamp-xml
1867 .PRECIOUS
: xml-builtin.c
1870 # gdb/cli/ dependencies
1872 # Need to explicitly specify the compile rule as make will do nothing
1873 # or try to compile the object file into the sub-directory.
1875 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1876 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1879 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1880 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1883 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1884 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1887 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1888 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1891 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1892 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1895 cli-script.o
: $(srcdir)/cli
/cli-script.c
1896 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1899 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1900 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1903 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1904 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1909 # GDBTK sub-directory
1911 # Need to explicitly specify the compile rule as make will do nothing
1912 # or try to compile the object file into the mi directory.
1914 all-gdbtk
: insight
$(EXEEXT
)
1917 transformed_name
=`t='$(program_transform_name)'; \
1918 echo insight | sed -e $$t` ; \
1919 if
test "x$$transformed_name" = x
; then \
1920 transformed_name
=insight
; \
1924 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
1925 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
1926 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1927 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1928 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
1929 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1930 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
1931 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
1932 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
1933 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1934 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
1935 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
1936 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
1937 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
1938 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
1939 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
1940 cd
$(srcdir)/gdbtk
/library
; \
1941 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
1943 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
1947 transformed_name
=`t='$(program_transform_name)'; \
1948 echo insight | sed -e $$t` ; \
1949 if
test "x$$transformed_name" = x
; then \
1950 transformed_name
=insight
; \
1954 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1955 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
1958 rm -f insight
$(EXEEXT
)
1960 # Removing the old gdb first works better if it is running, at least on SunOS.
1961 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
1962 $(CDEPS
) $(TDEPLIBS
)
1963 rm -f insight
$(EXEEXT
)
1964 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1965 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
1966 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1968 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
1969 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
1971 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
1972 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
1974 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
1975 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
1977 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
1978 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
1981 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1982 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
1985 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1986 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
1989 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1990 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
1993 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1994 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
1997 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
1998 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2001 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2002 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2005 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2006 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2009 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2010 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2013 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2014 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2019 # gdb/mi/ dependencies
2021 # Need to explicitly specify the compile rule as make will do nothing
2022 # or try to compile the object file into the sub-directory.
2024 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
2025 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
2028 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
2029 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
2032 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
2033 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
2036 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
2037 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
2040 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
2041 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
2044 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
2045 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
2048 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
2049 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
2052 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
2053 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
2056 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
2057 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
2060 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
2061 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
2064 mi-console.o
: $(srcdir)/mi
/mi-console.c
2065 $(COMPILE
) $(srcdir)/mi
/mi-console.c
2068 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
2069 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
2072 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
2073 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
2076 mi-main.o
: $(srcdir)/mi
/mi-main.c
2077 $(COMPILE
) $(srcdir)/mi
/mi-main.c
2080 mi-out.o
: $(srcdir)/mi
/mi-out.c
2081 $(COMPILE
) $(srcdir)/mi
/mi-out.c
2084 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
2085 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
2088 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
2089 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
2092 mi-common.o
: $(srcdir)/mi
/mi-common.c
2093 $(COMPILE
) $(srcdir)/mi
/mi-common.c
2096 # gdb/common/ dependencies
2098 # Need to explicitly specify the compile rule as make will do nothing
2099 # or try to compile the object file into the sub-directory.
2101 signals.o
: $(srcdir)/common
/signals.c
2102 $(COMPILE
) $(srcdir)/common
/signals.c
2105 common-utils.o
: ${srcdir}/common
/common-utils.c
2106 $(COMPILE
) $(srcdir)/common
/common-utils.c
2109 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
2110 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
2113 xml-utils.o
: ${srcdir}/common
/xml-utils.c
2114 $(COMPILE
) $(srcdir)/common
/xml-utils.c
2117 ptid.o
: ${srcdir}/common
/ptid.c
2118 $(COMPILE
) $(srcdir)/common
/ptid.c
2121 buffer.o
: ${srcdir}/common
/buffer.c
2122 $(COMPILE
) $(srcdir)/common
/buffer.c
2125 filestuff.o
: $(srcdir)/common
/filestuff.c
2126 $(COMPILE
) $(srcdir)/common
/filestuff.c
2129 format.o
: ${srcdir}/common
/format.c
2130 $(COMPILE
) $(srcdir)/common
/format.c
2133 common-agent.o
: $(srcdir)/common
/agent.c
2134 $(COMPILE
) $(srcdir)/common
/agent.c
2137 vec.o
: ${srcdir}/common
/vec.c
2138 $(COMPILE
) $(srcdir)/common
/vec.c
2141 print-utils.o
: ${srcdir}/common
/print-utils.c
2142 $(COMPILE
) $(srcdir)/common
/print-utils.c
2145 rsp-low.o
: ${srcdir}/common
/rsp-low.c
2146 $(COMPILE
) $(srcdir)/common
/rsp-low.c
2149 errors.o
: ${srcdir}/common
/errors.c
2150 $(COMPILE
) $(srcdir)/common
/errors.c
2153 common-debug.o
: ${srcdir}/common
/common-debug.c
2154 $(COMPILE
) $(srcdir)/common
/common-debug.c
2158 # gdb/target/ dependencies
2160 # Need to explicitly specify the compile rule as make will do nothing
2161 # or try to compile the object file into the sub-directory.
2163 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2164 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2167 # gdb/nat/ dependencies
2169 # Need to explicitly specify the compile rule as make will do nothing
2170 # or try to compile the object file into the sub-directory.
2172 i386-dregs.o
: ${srcdir}/nat
/i386-dregs.c
2173 $(COMPILE
) $(srcdir)/nat
/i386-dregs.c
2176 linux-btrace.o
: ${srcdir}/nat
/linux-btrace.c
2177 $(COMPILE
) $(srcdir)/nat
/linux-btrace.c
2180 linux-osdata.o
: ${srcdir}/nat
/linux-osdata.c
2181 $(COMPILE
) $(srcdir)/nat
/linux-osdata.c
2184 linux-procfs.o
: $(srcdir)/nat
/linux-procfs.c
2185 $(COMPILE
) $(srcdir)/nat
/linux-procfs.c
2188 linux-ptrace.o
: $(srcdir)/nat
/linux-ptrace.c
2189 $(COMPILE
) $(srcdir)/nat
/linux-ptrace.c
2192 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2193 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2196 mips-linux-watch.o
: ${srcdir}/nat
/mips-linux-watch.c
2197 $(COMPILE
) $(srcdir)/nat
/mips-linux-watch.c
2201 # gdb/tui/ dependencies
2203 # Need to explicitly specify the compile rule as make will do nothing
2204 # or try to compile the object file into the sub-directory.
2206 tui.o
: $(srcdir)/tui
/tui.c
2207 $(COMPILE
) $(srcdir)/tui
/tui.c
2210 tui-command.o
: $(srcdir)/tui
/tui-command.c
2211 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2214 tui-data.o
: $(srcdir)/tui
/tui-data.c
2215 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2218 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2219 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2222 tui-file.o
: $(srcdir)/tui
/tui-file.c
2223 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2226 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2227 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2230 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2231 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2234 tui-io.o
: $(srcdir)/tui
/tui-io.c
2235 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2238 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2239 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2242 tui-out.o
: $(srcdir)/tui
/tui-out.c
2243 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2246 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2247 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2250 tui-source.o
: $(srcdir)/tui
/tui-source.c
2251 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2254 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2255 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2258 tui-win.o
: $(srcdir)/tui
/tui-win.c
2259 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2262 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2263 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2266 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2267 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2270 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2271 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2274 # gdb/guile dependencies
2276 # Need to explicitly specify the compile rule as make will do nothing
2277 # or try to compile the object file into the sub-directory.
2279 guile.o
: $(srcdir)/guile
/guile.c
2280 $(COMPILE
) $(srcdir)/guile
/guile.c
2283 scm-arch.o
: $(srcdir)/guile
/scm-arch.c
2284 $(COMPILE
) $(srcdir)/guile
/scm-arch.c
2287 scm-auto-load.o
: $(srcdir)/guile
/scm-auto-load.c
2288 $(COMPILE
) $(srcdir)/guile
/scm-auto-load.c
2291 scm-block.o
: $(srcdir)/guile
/scm-block.c
2292 $(COMPILE
) $(srcdir)/guile
/scm-block.c
2295 scm-breakpoint.o
: $(srcdir)/guile
/scm-breakpoint.c
2296 $(COMPILE
) $(srcdir)/guile
/scm-breakpoint.c
2299 scm-cmd.o
: $(srcdir)/guile
/scm-cmd.c
2300 $(COMPILE
) $(srcdir)/guile
/scm-cmd.c
2303 scm-disasm.o
: $(srcdir)/guile
/scm-disasm.c
2304 $(COMPILE
) $(srcdir)/guile
/scm-disasm.c
2307 scm-exception.o
: $(srcdir)/guile
/scm-exception.c
2308 $(COMPILE
) $(srcdir)/guile
/scm-exception.c
2311 scm-frame.o
: $(srcdir)/guile
/scm-frame.c
2312 $(COMPILE
) $(srcdir)/guile
/scm-frame.c
2315 scm-gsmob.o
: $(srcdir)/guile
/scm-gsmob.c
2316 $(COMPILE
) $(srcdir)/guile
/scm-gsmob.c
2319 scm-iterator.o
: $(srcdir)/guile
/scm-iterator.c
2320 $(COMPILE
) $(srcdir)/guile
/scm-iterator.c
2323 scm-lazy-string.o
: $(srcdir)/guile
/scm-lazy-string.c
2324 $(COMPILE
) $(srcdir)/guile
/scm-lazy-string.c
2327 scm-math.o
: $(srcdir)/guile
/scm-math.c
2328 $(COMPILE
) $(srcdir)/guile
/scm-math.c
2331 scm-objfile.o
: $(srcdir)/guile
/scm-objfile.c
2332 $(COMPILE
) $(srcdir)/guile
/scm-objfile.c
2335 scm-param.o
: $(srcdir)/guile
/scm-param.c
2336 $(COMPILE
) $(srcdir)/guile
/scm-param.c
2339 scm-ports.o
: $(srcdir)/guile
/scm-ports.c
2340 $(COMPILE
) $(srcdir)/guile
/scm-ports.c
2343 scm-pretty-print.o
: $(srcdir)/guile
/scm-pretty-print.c
2344 $(COMPILE
) $(srcdir)/guile
/scm-pretty-print.c
2347 scm-progspace.o
: $(srcdir)/guile
/scm-progspace.c
2348 $(COMPILE
) $(srcdir)/guile
/scm-progspace.c
2351 scm-safe-call.o
: $(srcdir)/guile
/scm-safe-call.c
2352 $(COMPILE
) $(srcdir)/guile
/scm-safe-call.c
2355 scm-string.o
: $(srcdir)/guile
/scm-string.c
2356 $(COMPILE
) $(srcdir)/guile
/scm-string.c
2359 scm-symbol.o
: $(srcdir)/guile
/scm-symbol.c
2360 $(COMPILE
) $(srcdir)/guile
/scm-symbol.c
2363 scm-symtab.o
: $(srcdir)/guile
/scm-symtab.c
2364 $(COMPILE
) $(srcdir)/guile
/scm-symtab.c
2367 scm-type.o
: $(srcdir)/guile
/scm-type.c
2368 $(COMPILE
) $(srcdir)/guile
/scm-type.c
2371 scm-utils.o
: $(srcdir)/guile
/scm-utils.c
2372 $(COMPILE
) $(srcdir)/guile
/scm-utils.c
2375 scm-value.o
: $(srcdir)/guile
/scm-value.c
2376 $(COMPILE
) $(srcdir)/guile
/scm-value.c
2379 # gdb/python/ dependencies
2381 # Need to explicitly specify the compile rule as make will do nothing
2382 # or try to compile the object file into the sub-directory.
2384 # Flags needed to compile Python code
2385 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2387 python.o
: $(srcdir)/python
/python.c
2388 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2391 py-arch.o
: $(srcdir)/python
/py-arch.c
2392 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2395 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2396 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2399 py-block.o
: $(srcdir)/python
/py-block.c
2400 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2403 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2404 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2407 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2408 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2411 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2412 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2415 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2416 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2419 py-xmethods.o
: $(srcdir)/python
/py-xmethods.c
2420 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-xmethods.c
2423 py-event.o
: $(srcdir)/python
/py-event.c
2424 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2427 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2428 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2431 py-evts.o
: $(srcdir)/python
/py-evts.c
2432 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2435 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2436 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2439 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2440 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2443 py-frame.o
: $(srcdir)/python
/py-frame.c
2444 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2447 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2448 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2451 py-function.o
: $(srcdir)/python
/py-function.c
2452 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2455 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2456 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2459 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2460 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2463 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2464 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2467 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2468 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2471 py-linetable.o
: $(srcdir)/python
/py-linetable.c
2472 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-linetable.c
2475 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2476 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2479 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2480 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2483 py-param.o
: $(srcdir)/python
/py-param.c
2484 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2487 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2488 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2491 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2492 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2495 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2496 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2499 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2500 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2503 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2504 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2507 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2508 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2511 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2512 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2515 py-type.o
: $(srcdir)/python
/py-type.c
2516 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2519 py-utils.o
: $(srcdir)/python
/py-utils.c
2520 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2523 py-value.o
: $(srcdir)/python
/py-value.c
2524 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2527 py-varobj.o
: $(srcdir)/python
/py-varobj.c
2528 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-varobj.c
2532 # Dependency tracking. Most of this is conditional on GNU Make being
2533 # found by configure; if GNU Make is not found, we fall back to a
2537 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2538 # Note that we put the dependencies into a .Tpo file, then move them
2539 # into place if the compile succeeds. We need this because gcc does
2540 # not atomically write the dependency output file.
2541 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2542 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2543 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2544 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2546 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2547 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2548 # depcomp handles atomicity for us, so we don't need a postcompile
2550 @GMAKE_TRUE@
override POSTCOMPILE
=
2553 # A list of all the objects we might care about in this build, for
2554 # dependency tracking.
2555 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2556 test-cp-name-parser.o
2558 # Ensure that generated files are created early. Use order-only
2559 # dependencies if available. They require GNU make 3.80 or newer,
2560 # and the .VARIABLES variable was introduced at the same time.
2561 @GMAKE_TRUE@
ifdef .VARIABLES
2562 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2564 $(all_object_files
) : $(generated_files
)
2568 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2570 ### end of the gdb Makefile.in.