gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 # Where is the INTL library?  Typically in ../intl.
 161 INTL = @LIBINTL@
 162 INTL_DEPS = @LIBINTL_DEP@
 163 INTL_CFLAGS = @INCINTL@
 164
 165 # Did the user give us a --with-sysroot option?
 166 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 167 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 168
 169 # Did the user give us a --with-gdb-datadir option?
 170 GDB_DATADIR = @GDB_DATADIR@
 171
 172 # Helper code from gnulib.
 173 LIBGNU = gnulib/libgnu.a
 174 INCGNU = -I$(srcdir)/gnulib -Ignulib
 175
 176 # Generated headers in the gnulib directory.  These must be listed
 177 # so that they are generated before other files are compiled.
 178 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 179
 180 #
 181 # CLI sub directory definitons
 182 #
 183 SUBDIR_CLI_OBS = \
 184         cli-dump.o \
 185         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 186         cli-logging.o \
 187         cli-interp.o
 188 SUBDIR_CLI_SRCS = \
 189         cli/cli-dump.c \
 190         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 191         cli/cli-logging.c \
 192         cli/cli-interp.c
 193 SUBDIR_CLI_DEPS =
 194 SUBDIR_CLI_LDFLAGS=
 195 SUBDIR_CLI_CFLAGS=
 196
 197 #
 198 # MI sub directory definitons
 199 #
 200 SUBDIR_MI_OBS = \
 201         mi-out.o mi-console.o \
 202         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 203         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 204         mi-interp.o \
 205         mi-main.o mi-parse.o mi-getopt.o
 206 SUBDIR_MI_SRCS = \
 207         mi/mi-out.c mi/mi-console.c \
 208         mi/mi-cmds.c mi/mi-cmd-env.c \
 209         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 210         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 211         mi/mi-cmd-target.c mi/mi-interp.c \
 212         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
 213 SUBDIR_MI_DEPS =
 214 SUBDIR_MI_LDFLAGS=
 215 SUBDIR_MI_CFLAGS= \
 216         -DMI_OUT=1
 217
 218 #
 219 # TUI sub directory definitions
 220 #
 221
 222 # Name of the TUI program
 223 TUI=gdbtui
 224
 225 SUBDIR_TUI_OBS = \
 226         tui-command.o \
 227         tui-data.o \
 228         tui-disasm.o \
 229         tui-file.o tui.o \
 230         tui-hooks.o \
 231         tui-interp.o \
 232         tui-io.o \
 233         tui-layout.o \
 234         tui-out.o \
 235         tui-regs.o \
 236         tui-source.o \
 237         tui-stack.o \
 238         tui-win.o \
 239         tui-windata.o \
 240         tui-wingeneral.o \
 241         tui-winsource.o
 242 SUBDIR_TUI_SRCS = \
 243         tui/tui-command.c \
 244         tui/tui-data.c \
 245         tui/tui-disasm.c \
 246         tui/tui-file.c \
 247         tui/tui-hooks.c \
 248         tui/tui-interp.c \
 249         tui/tui-io.c \
 250         tui/tui-layout.c \
 251         tui/tui-out.c \
 252         tui/tui-regs.c \
 253         tui/tui-source.c \
 254         tui/tui-stack.c \
 255         tui/tui-win.c \
 256         tui/tui-windata.c \
 257         tui/tui-wingeneral.c \
 258         tui/tui-winsource.c \
 259         tui/tui.c
 260 SUBDIR_TUI_DEPS =
 261 SUBDIR_TUI_LDFLAGS=
 262 SUBDIR_TUI_CFLAGS= \
 263         -DTUI=1
 264
 265 #
 266 # python sub directory definitons
 267 #
 268 SUBDIR_PYTHON_OBS = \
 269         python.o \
 270         py-block.o \
 271         py-breakpoint.o \
 272         py-cmd.o \
 273         py-frame.o \
 274         py-function.o \
 275         py-lazy-string.o \
 276         py-objfile.o \
 277         py-prettyprint.o \
 278         py-symbol.o \
 279         py-symtab.o \
 280         py-type.o \
 281         py-utils.o \
 282         py-value.o
 283 SUBDIR_PYTHON_SRCS = \
 284         python/python.c \
 285         python/py-block.c \
 286         python/py-breakpoint.c \
 287         python/py-cmd.c \
 288         python/py-frame.c \
 289         python/py-function.c \
 290         python/py-lazy-string.c \
 291         python/py-objfile.c \
 292         python/py-prettyprint.c \
 293         python/py-symbol.c \
 294         python/py-symtab.c \
 295         python/py-type.c \
 296         python/py-utils.c \
 297         python/py-value.c
 298 SUBDIR_PYTHON_DEPS =
 299 SUBDIR_PYTHON_LDFLAGS=
 300 SUBDIR_PYTHON_CFLAGS=
 301
 302
 303 # Opcodes currently live in one of two places.  Either they are in the
 304 # opcode library, typically ../opcodes, or they are in a header file
 305 # in INCLUDE_DIR.
 306 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 307 # disassemblers?
 308 OPCODES_DIR = ../opcodes
 309 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 310 OPCODES = $(OPCODES_DIR)/libopcodes.a
 311 # Where are the other opcode tables which only have header file
 312 # versions?
 313 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 314 # Some source files like to use #include "opcodes/file.h"
 315 OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
 316
 317 # The simulator is usually nonexistent; targets that include one
 318 # should set this to list all the .o or .a files to be linked in.
 319 SIM = @SIM@
 320
 321 WIN32LIBS = @WIN32LIBS@
 322
 323 # Tcl et al cflags and libraries
 324 TCL = @TCL_LIBRARY@
 325 TCL_CFLAGS = @TCL_INCLUDE@
 326 GDBTKLIBS = @GDBTKLIBS@
 327 # Extra flags that the GDBTK files need:
 328 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 329
 330 TK = @TK_LIBRARY@
 331 TK_CFLAGS = @TK_INCLUDE@
 332
 333 X11_CFLAGS = @TK_XINCLUDES@
 334 X11_LDFLAGS =
 335 X11_LIBS =
 336
 337 WIN32LDAPP = @WIN32LDAPP@
 338
 339 LIBGUI = @LIBGUI@
 340 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 341 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 342
 343 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 344
 345 # The version of gdbtk we're building. This should be kept
 346 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 347 GDBTK_VERSION = 1.0
 348 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 349
 350 # Gdbtk requires an absolute path to the source directory or
 351 # the testsuite won't run properly.
 352 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 353
 354 SUBDIR_GDBTK_OBS = \
 355         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 356         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 357 SUBDIR_GDBTK_SRCS = \
 358         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 359         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 360         gdbtk/generic/gdbtk-interp.c \
 361         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 362         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 363         gdbtk/generic/gdbtk-main.c
 364 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 365 SUBDIR_GDBTK_LDFLAGS=
 366 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 367
 368 CONFIG_OBS= @CONFIG_OBS@
 369 CONFIG_SRCS= @CONFIG_SRCS@
 370 CONFIG_DEPS= @CONFIG_DEPS@
 371 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 372 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 373 CONFIG_ALL= @CONFIG_ALL@
 374 CONFIG_CLEAN= @CONFIG_CLEAN@
 375 CONFIG_INSTALL = @CONFIG_INSTALL@
 376 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 377
 378 # -I. for config files.
 379 # -I$(srcdir) for gdb internal headers.
 380 # -I$(srcdir)/config for more generic config files.
 381
 382 # It is also possible that you will need to add -I/usr/include/sys if
 383 # your system doesn't have fcntl.h in /usr/include (which is where it
 384 # should be according to Posix).
 385 DEFS = @DEFS@
 386 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 387         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 388
 389 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 390 GLOBAL_CFLAGS = $(MH_CFLAGS)
 391
 392 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 393
 394 # CFLAGS is specifically reserved for setting from the command line
 395 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 396 CFLAGS = @CFLAGS@
 397
 398 # Set by configure, for e.g. expat.
 399 INTERNAL_CPPFLAGS = @CPPFLAGS@
 400
 401 # Need to pass this to testsuite for "make check".  Probably should be
 402 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 403 # so "make check" has the same result no matter where it is run.
 404 CXXFLAGS = -g -O
 405
 406 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 407 INTERNAL_CFLAGS_BASE = \
 408         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 409         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 410         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 411         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 412 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 413 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 414
 415 # LDFLAGS is specifically reserved for setting from the command line
 416 # when running make.
 417 LDFLAGS = @LDFLAGS@
 418
 419 # Profiling options need to go here to work.
 420 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 421 # and have it work; that's why CFLAGS is here.
 422 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 423 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 424
 425 # If your system is missing alloca(), or, more likely, it's there but
 426 # it doesn't work, then refer to libiberty.
 427
 428 # Libraries and corresponding dependencies for compiling gdb.
 429 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 430 # LIBIBERTY appears twice on purpose.
 431 # If you have the Cygnus libraries installed,
 432 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 433 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 434         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 435         -lintl -liberty $(LIBGNU)
 436 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 437         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 438         $(LIBEXPAT) \
 439         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 440 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 441         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 442
 443 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 444 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 445
 446 DIST=gdb
 447
 448 LINT=/usr/5bin/lint
 449 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 450         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 451         $(INTL_CFLAGS)
 452
 453 RUNTEST = runtest
 454 RUNTESTFLAGS=
 455
 456 # XML files to build in to GDB.
 457 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 458         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \
 459         $(srcdir)/features/threads.dtd
 460
 461 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 462 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 463 # etc., then there will be (as part of the C library or perhaps as
 464 # part of libiberty) a POSIX interface.  But at least for now the
 465 # host-dependent makefile fragment might need to use something else
 466 # besides ser-unix.o
 467 SER_HARDWIRE = @SER_HARDWIRE@
 468
 469 # The `remote' debugging target is supported for most architectures,
 470 # but not all (e.g. 960)
 471 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 472
 473 # This is remote-sim.o if a simulator is to be linked in.
 474 SIM_OBS = @SIM_OBS@
 475
 476 # Target-dependent object files.
 477 TARGET_OBS = @TARGET_OBS@
 478
 479 # All target-dependent objects files that require 64-bit CORE_ADDR
 480 # (used with --enable-targets=all --enable-64-bit-bfd).
 481 ALL_64_TARGET_OBS = \
 482         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 483         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 484         amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
 485         amd64-linux-tdep.o amd64nbsd-tdep.o \
 486         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
 487         ia64-linux-tdep.o ia64-tdep.o \
 488         mips64obsd-tdep.o \
 489         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 490         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 491
 492 # All other target-dependent objects files (used with --enable-targets=all).
 493 ALL_TARGET_OBS = \
 494         armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
 495         armnbsd-tdep.o armobsd-tdep.o \
 496         arm-tdep.o arm-wince-tdep.o \
 497         avr-tdep.o \
 498         cris-tdep.o \
 499         dicos-tdep.o \
 500         frv-linux-tdep.o frv-tdep.o \
 501         h8300-tdep.o \
 502         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 503         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 504         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 505         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 506         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 507         i386-dicos-tdep.o i386-darwin-tdep.o \
 508         iq2000-tdep.o \
 509         linux-tdep.o \
 510         lm32-tdep.o \
 511         m32c-tdep.o \
 512         m32r-linux-tdep.o m32r-tdep.o \
 513         m68hc11-tdep.o \
 514         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 515         m88k-tdep.o \
 516         mep-tdep.o \
 517         microblaze-tdep.o microblaze-linux-tdep.o \
 518         mips-irix-tdep.o mips-linux-tdep.o \
 519         mipsnbsd-tdep.o mips-tdep.o \
 520         mn10300-linux-tdep.o mn10300-tdep.o \
 521         moxie-tdep.o \
 522         mt-tdep.o \
 523         nto-tdep.o \
 524         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 525         rs6000-aix-tdep.o rs6000-tdep.o \
 526         s390-tdep.o \
 527         score-tdep.o \
 528         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 529         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 530         sparc-sol2-tdep.o sparc-tdep.o \
 531         spu-tdep.o spu-multiarch.o solib-spu.o \
 532         v850-tdep.o \
 533         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 534         xstormy16-tdep.o \
 535         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 536         glibc-tdep.o \
 537         bsd-uthread.o \
 538         nbsd-tdep.o obsd-tdep.o \
 539         sol2-tdep.o \
 540         solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 541         solib-som.o solib-pa64.o solib-darwin.o \
 542         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 543         remote-m32r-sdi.o \
 544         xcoffread.o \
 545         symfile-mem.o \
 546         corelow.o \
 547         windows-tdep.o \
 548         linux-record.o
 549
 550 # Host-dependent makefile fragment comes in here.
 551 @host_makefile_frag@
 552 # End of host-dependent makefile fragment
 553
 554 FLAGS_TO_PASS = \
 555         "prefix=$(prefix)" \
 556         "exec_prefix=$(exec_prefix)" \
 557         "infodir=$(infodir)" \
 558         "datarootdir=$(datarootdir)" \
 559         "docdir=$(docdir)" \
 560         "htmldir=$(htmldir)" \
 561         "pdfdir=$(pdfdir)" \
 562         "libdir=$(libdir)" \
 563         "mandir=$(mandir)" \
 564         "datadir=$(datadir)" \
 565         "includedir=$(includedir)" \
 566         "against=$(against)" \
 567         "DESTDIR=$(DESTDIR)" \
 568         "AR=$(AR)" \
 569         "AR_FLAGS=$(AR_FLAGS)" \
 570         "CC=$(CC)" \
 571         "CFLAGS=$(CFLAGS)" \
 572         "CXX=$(CXX)" \
 573         "CXXFLAGS=$(CXXFLAGS)" \
 574         "DLLTOOL=$(DLLTOOL)" \
 575         "LDFLAGS=$(LDFLAGS)" \
 576         "RANLIB=$(RANLIB)" \
 577         "MAKEINFO=$(MAKEINFO)" \
 578         "MAKEHTML=$(MAKEHTML)" \
 579         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 580         "INSTALL=$(INSTALL)" \
 581         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 582         "INSTALL_DATA=$(INSTALL_DATA)" \
 583         "RUNTEST=$(RUNTEST)" \
 584         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 585
 586 # Flags that we pass when building the testsuite.
 587
 588 # empty for native, $(target_alias)/ for cross
 589 target_subdir = @target_subdir@
 590
 591 CC_FOR_TARGET = ` \
 592   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 593     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 594       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 595     else \
 596       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 597     fi; \
 598   else \
 599     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 600       echo $(CC); \
 601     else \
 602       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 603     fi; \
 604   fi`
 605
 606 CXX = gcc
 607 CXX_FOR_TARGET = ` \
 608   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 609     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 610       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 611     else \
 612       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 613     fi; \
 614   else \
 615     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 616       echo $(CXX); \
 617     else \
 618       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 619     fi; \
 620   fi`
 621
 622 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 623 # duplicating the lengthy definition.
 624 TARGET_FLAGS_TO_PASS = \
 625         "prefix=$(prefix)" \
 626         "exec_prefix=$(exec_prefix)" \
 627         "against=$(against)" \
 628         'CC=$$(CC_FOR_TARGET)' \
 629         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 630         "CFLAGS=$(CFLAGS)" \
 631         'CXX=$$(CXX_FOR_TARGET)' \
 632         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 633         "CXXFLAGS=$(CXXFLAGS)" \
 634         "INSTALL=$(INSTALL)" \
 635         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 636         "INSTALL_DATA=$(INSTALL_DATA)" \
 637         "MAKEINFO=$(MAKEINFO)" \
 638         "MAKEHTML=$(MAKEHTML)" \
 639         "RUNTEST=$(RUNTEST)" \
 640         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 641         "FORCE_PARALLEL=$(FORCE_PARALLEL)"
 642
 643 # All source files that go into linking GDB.
 644 # Links made at configuration time should not be specified here, since
 645 # SFILES is used in building the distribution archive.
 646
 647 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 648         addrmap.c \
 649         auxv.c ax-general.c ax-gdb.c \
 650         bcache.c \
 651         bfd-target.c \
 652         block.c blockframe.c breakpoint.c buildsym.c \
 653         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 654         charset.c cli-out.c coffread.c coff-pe-read.c \
 655         complaints.c completer.c corefile.c \
 656         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 657         cp-name-parser.y \
 658         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 659         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 660         elfread.c environ.c eval.c event-loop.c event-top.c \
 661         exceptions.c expprint.c \
 662         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 663         frame.c frame-base.c frame-unwind.c \
 664         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 665         inf-loop.c \
 666         infcall.c \
 667         infcmd.c inflow.c infrun.c \
 668         inline-frame.c \
 669         interps.c \
 670         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 671         language.c linespec.c \
 672         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 673         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 674         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 675         mi/mi-common.c \
 676         objc-exp.y objc-lang.c \
 677         objfiles.c osabi.c observer.c osdata.c \
 678         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 679         progspace.c \
 680         prologue-value.c psymtab.c \
 681         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 682         scm-exp.c scm-lang.c scm-valprint.c \
 683         sentinel-frame.c \
 684         serial.c ser-base.c ser-unix.c \
 685         solib.c solib-null.c source.c \
 686         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 687         symtab.c \
 688         target.c target-descriptions.c target-memory.c \
 689         thread.c top.c tracepoint.c \
 690         trad-frame.c \
 691         tramp-frame.c \
 692         typeprint.c \
 693         ui-out.c utils.c ui-file.h ui-file.c \
 694         user-regs.c \
 695         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 696         wrapper.c \
 697         xml-tdesc.c xml-support.c \
 698         inferior.c gdb_usleep.c \
 699         record.c gcore.c \
 700         jit.c \
 701         xml-syscall.c \
 702
 703 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 704
 705 # Header files that need to have srcdir added.  Note that in the cases
 706 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 707 # so that each .h file is listed exactly once (M-x tags-search works
 708 # wrong if TAGS has files twice).  Because this is tricky to get
 709 # right, it is probably easiest just to list .h files here directly.
 710
 711 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 712 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 713 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 714 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 715 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 716 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 717 osf-share/cma_stack_int.h osf-share/cma_init.h \
 718 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 719 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 720 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
 721 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 722 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 723 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 724 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 725 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 726 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 727 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 728 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 729 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 730 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 731 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 732 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 733 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 734 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 735 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 736 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 737 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 738 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 739 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 740 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 741 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 742 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 743 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 744 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 745 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 746 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 747 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 748 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 749 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 750 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 751 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 752 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 753 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 754 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 755 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 756 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 757 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 758 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 759 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 760 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 761 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 762 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 763 regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \
 764 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 765 config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
 766 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 767 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 768 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 769 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 770 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h \
 771 psymtab.h psympriv.h
 772
 773 # Header files that already have srcdir in them, or which are in objdir.
 774
 775 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 776
 777
 778 # GDB "info" files, which should be included in their entirety
 779 INFOFILES = gdb.info*
 780
 781 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 782
 783 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 784 # default their values the way we do for SER_HARDWIRE; in the future
 785 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 786 # variables analogous to SER_HARDWIRE which get defaulted in this
 787 # Makefile.in
 788
 789 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 790            $(REMOTE_OBS) $(SIM_OBS)
 791
 792 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 793 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 794 # and it's more useful to see it in the .y file.
 795 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 796         $(CONFIG_SRCS)
 797 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 798
 799 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 800         version.o \
 801         annotate.o \
 802         addrmap.o \
 803         auxv.o \
 804         bfd-target.o \
 805         blockframe.o breakpoint.o findvar.o regcache.o \
 806         charset.o disasm.o dummy-frame.o dfp.o \
 807         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 808         block.o symtab.o psymtab.o symfile.o symmisc.o linespec.o dictionary.o \
 809         infcall.o \
 810         infcmd.o infrun.o \
 811         expprint.o environ.o stack.o thread.o \
 812         exceptions.o \
 813         inf-child.o \
 814         interps.o \
 815         main.o \
 816         macrotab.o macrocmd.o macroexp.o macroscope.o \
 817         mi-common.o \
 818         event-loop.o event-top.o inf-loop.o completer.o \
 819         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 820         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 821         findcmd.o \
 822         std-regs.o \
 823         signals.o \
 824         exec.o reverse.o \
 825         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 826         dbxread.o coffread.o coff-pe-read.o \
 827         dwarf2read.o mipsread.o stabsread.o corefile.o \
 828         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 829         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 830         ada-tasks.o \
 831         ui-out.o cli-out.o \
 832         varobj.o vec.o wrapper.o \
 833         jv-lang.o jv-valprint.o jv-typeprint.o \
 834         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 835         scm-exp.o scm-lang.o scm-valprint.o \
 836         sentinel-frame.o \
 837         complaints.o typeprint.o \
 838         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 839         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 840         serial.o mdebugread.o top.o utils.o \
 841         ui-file.o \
 842         user-regs.o \
 843         frame.o frame-unwind.o doublest.o \
 844         frame-base.o \
 845         inline-frame.o \
 846         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 847         cp-namespace.o \
 848         reggroups.o regset.o \
 849         trad-frame.o \
 850         tramp-frame.o \
 851         solib.o solib-null.o \
 852         prologue-value.o memory-map.o xml-support.o xml-syscall.o \
 853         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 854         inferior.o osdata.o gdb_usleep.o record.o gcore.o \
 855         jit.o progspace.o
 856
 857 # Definitions for the syscall's XML files and dir
 858 XML_SYSCALLS_DIR = syscalls/
 859 XML_SYSCALLS_FILES = gdb-syscalls.dtd \
 860                      ppc-linux.xml ppc64-linux.xml \
 861                      i386-linux.xml amd64-linux.xml \
 862                      sparc-linux.xml sparc64-linux.xml
 863
 864 TSOBS = inflow.o
 865
 866 SUBDIRS = @subdirs@
 867 CLEANDIRS = $(SUBDIRS) gnulib
 868
 869 # For now, shortcut the "configure GDB for fewer languages" stuff.
 870 YYFILES = c-exp.c \
 871         cp-name-parser.c \
 872         objc-exp.c \
 873         ada-lex.c \
 874         ada-exp.c \
 875         jv-exp.c \
 876         f-exp.c m2-exp.c p-exp.c
 877 YYOBJ = c-exp.o \
 878         cp-name-parser.o \
 879         objc-exp.o \
 880         ada-exp.o \
 881         jv-exp.o \
 882         f-exp.o m2-exp.o p-exp.o
 883
 884 # Things which need to be built when making a distribution.
 885
 886 DISTSTUFF = $(YYFILES)
 887
 888
 889 # All generated files which can be included by another file.
 890 generated_files = config.h observer.h observer.inc ada-lex.c \
 891         $(GNULIB_H) $(NAT_GENERATED_FILES)
 892
 893 .c.o:
 894         $(COMPILE) $<
 895         $(POSTCOMPILE)
 896
 897 all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy
 898         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 899 .PHONY: all-tui
 900 all-tui: $(TUI)$(EXEEXT)
 901
 902 # This is needed for running GDB from the build directory
 903 .PHONY: xml-syscall-copy
 904 xml-syscall-copy:
 905         if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
 906           mkdir -p ./$(XML_SYSCALLS_DIR) ; \
 907           list='$(XML_SYSCALLS_FILES)' ; \
 908           for file in $$list ; do \
 909             f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 910             if test -f $$f ; then \
 911               $(INSTALL_DATA) $$f \
 912                   ./$(XML_SYSCALLS_DIR) ; \
 913             fi ; \
 914           done ; \
 915         fi ;
 916
 917 # This target is responsible for properly installing the syscalls'
 918 # XML files in the system.
 919 .PHONY: xml-syscall-install
 920 xml-syscall-install:
 921         $(SHELL) $(srcdir)/../mkinstalldirs \
 922                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 923         list='$(XML_SYSCALLS_FILES)' ; \
 924         for file in $$list ; do \
 925           f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 926           if test -f $$f ; then \
 927             $(INSTALL_DATA) $$f \
 928                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 929           fi ; \
 930         done ;
 931
 932 installcheck:
 933
 934 # The check target can not use subdir_do, because subdir_do does not
 935 # use TARGET_FLAGS_TO_PASS.
 936 check: force
 937         @if [ -f testsuite/Makefile ]; then \
 938           rootme=`pwd`; export rootme; \
 939           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 940           cd testsuite; \
 941           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 942         else true; fi
 943
 944 # The idea is to parallelize testing of multilibs, for example:
 945 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 946 # will run 3 concurrent sessions of check, eventually testing all 10
 947 # combinations.  GNU make is required for the % pattern to work, as is
 948 # a shell that expands alternations within braces.  If GNU make is not
 949 # used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
 950 # prevent serialized checking due to the passed RUNTESTFLAGS.
 951 # FIXME: use config.status --config not --version, when available.
 952 check//%: force
 953         @if [ -f testsuite/config.status ]; then \
 954           rootme=`pwd`; export rootme; \
 955           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 956           target=`echo "$@" | sed 's,//.*,,'`; \
 957           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 958           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 959           testdir=testsuite.$$vardots; \
 960           if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
 961             configargs=`cd testsuite && ./config.status --version | \
 962               sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
 963             $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
 964             (cd $$testdir && \
 965              eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
 966                            "\"--srcdir=\$$rootsrc/testsuite\"" \
 967              ); \
 968           else :; fi && cd $$testdir && \
 969           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 970             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 971             FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
 972             "$$target"; \
 973         else true; fi
 974
 975 info install-info clean-info dvi pdf install-pdf html install-html: force
 976         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 977
 978 gdb.z:gdb.1
 979         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 980         pack gdb.t ; rm -f gdb.t
 981         mv gdb.t.z gdb.z
 982
 983 # Traditionally "install" depends on "all".  But it may be useful
 984 # not to; for example, if the user has made some trivial change to a
 985 # source file and doesn't care about rebuilding or just wants to save the
 986 # time it takes for make to check that all is up to date.
 987 # install-only is intended to address that need.
 988 install: all install-only
 989
 990 # The "install-only" target also installs the syscalls' XML files in
 991 # the system.
 992 install-only: $(CONFIG_INSTALL) xml-syscall-install
 993         transformed_name=`t='$(program_transform_name)'; \
 994                           echo gdb | sed -e "$$t"` ; \
 995                 if test "x$$transformed_name" = x; then \
 996                   transformed_name=gdb ; \
 997                 else \
 998                   true ; \
 999                 fi ; \
1000                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1001                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1002                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1003                 $(SHELL) $(srcdir)/../mkinstalldirs \
1004                         $(DESTDIR)$(man1dir) ; \
1005                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1006                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1007         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1008 .PHONY: install-tui
1009 install-tui:
1010         transformed_name=`t='$(program_transform_name)'; \
1011                           echo $(TUI) | sed -e "$$t"` ; \
1012                 if test "x$$transformed_name" = x; then \
1013                   transformed_name=$(TUI) ; \
1014                 else \
1015                   true ; \
1016                 fi ; \
1017                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1018                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
1019                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1020                 $(SHELL) $(srcdir)/../mkinstalldirs \
1021                         $(DESTDIR)$(man1dir) ; \
1022                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1023                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1024
1025
1026 uninstall: force $(CONFIG_UNINSTALL)
1027         transformed_name=`t='$(program_transform_name)'; \
1028                           echo gdb | sed -e $$t` ; \
1029                 if test "x$$transformed_name" = x; then \
1030                   transformed_name=gdb ; \
1031                 else \
1032                   true ; \
1033                 fi ; \
1034                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1035                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1036         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1037 .PHONY: uninstall-tui
1038 uninstall-tui:
1039         transformed_name=`t='$(program_transform_name)'; \
1040                           echo $(TUI) | sed -e $$t` ; \
1041                 if test "x$$transformed_name" = x; then \
1042                   transformed_name=$(TUI) ; \
1043                 else \
1044                   true ; \
1045                 fi ; \
1046                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1047                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1048
1049 # The C++ name parser can be built standalone for testing.
1050 test-cp-name-parser.o: cp-name-parser.c
1051         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1052         $(POSTCOMPILE)
1053
1054 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1055         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1056                 test-cp-name-parser.o $(LIBIBERTY)
1057
1058 # We do this by grepping through sources.  If that turns out to be too slow,
1059 # maybe we could just require every .o file to have an initialization routine
1060 # of a given name (top.o -> _initialize_top, etc.).
1061 #
1062 # Formatting conventions:  The name of the _initialize_* routines must start
1063 # in column zero, and must not be inside #if.
1064 #
1065 # Note that the set of files with init functions might change, or the names
1066 # of the functions might change, so this files needs to depend on all the
1067 # object files that will be linked into gdb.
1068
1069 # FIXME: There is a problem with this approach - init.c may force
1070 # unnecessary files to be linked in.
1071
1072 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1073 # the first call is to _initialize_gdbtypes (implemented by explicitly
1074 # putting that function's name first in the init.l-tmp file).  This is
1075 # a hack to ensure that all the architecture dependant global
1076 # builtin_type_* variables are initialized before anything else
1077 # (per-architecture code is called in the same order that it is
1078 # registered).  The ``correct fix'' is to have all the builtin types
1079 # made part of the architecture and initialize them on-demand (using
1080 # gdbarch_data) just like everything else.  The catch is that other
1081 # modules still take the address of these builtin types forcing them
1082 # to be variables, sigh!
1083
1084 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1085 # anchored on the first column and excludes the ``/'' character so
1086 # that it doesn't add the $(srcdir) prefix to any file that already
1087 # has an absolute path.  It turns out that $(DEC)'s True64 make
1088 # automatically adds the $(srcdir) prefixes when it encounters files
1089 # in sub-directories such as cli/ and mi/.
1090
1091 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1092 # duplicates.  Files in the gdb/ directory can end up appearing in
1093 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1094
1095 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1096 init.c: $(INIT_FILES)
1097         @echo Making init.c
1098         @rm -f init.c-tmp init.l-tmp
1099         @touch init.c-tmp
1100         @echo gdbtypes > init.l-tmp
1101         @-LANG=C ; export LANG ; \
1102         LC_ALL=C ; export LC_ALL ; \
1103         echo $(INIT_FILES) | \
1104         tr ' ' '\012' | \
1105         sed \
1106             -e '/^gdbtypes.[co]$$/d' \
1107             -e '/^init.[co]$$/d' \
1108             -e '/xdr_ld.[co]$$/d' \
1109             -e '/xdr_ptrace.[co]$$/d' \
1110             -e '/xdr_rdb.[co]$$/d' \
1111             -e '/udr.[co]$$/d' \
1112             -e '/udip2soc.[co]$$/d' \
1113             -e '/udi2go32.[co]$$/d' \
1114             -e '/version.[co]$$/d' \
1115             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1116             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1117             -e 's/\.[co]$$/.c/' \
1118             -e 's,signals\.c,common/signals\.c,' \
1119             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1120         while read f; do \
1121             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1122         done | \
1123         while read f; do \
1124             case " $$fs " in \
1125                 *" $$f "* ) ;; \
1126                 * ) echo $$f ; fs="$$fs $$f";; \
1127             esac; \
1128         done >> init.l-tmp
1129         @echo '/* Do not modify this file.  */' >>init.c-tmp
1130         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1131         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1132         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1133         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1134         @echo 'void' >>init.c-tmp
1135         @echo 'initialize_all_files (void)' >>init.c-tmp
1136         @echo '{' >>init.c-tmp
1137         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1138         @echo '}' >>init.c-tmp
1139         @rm init.l-tmp
1140         @mv init.c-tmp init.c
1141
1142 .PRECIOUS: init.c
1143
1144 # Removing the old gdb first works better if it is running, at least on SunOS.
1145 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1146         rm -f gdb$(EXEEXT)
1147         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1148                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1149                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1150
1151 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1152         rm -f $(TUI)$(EXEEXT)
1153         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1154                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1155                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1156
1157 # Convenience rule to handle recursion.
1158 $(LIBGNU) $(GNULIB_H): all-lib
1159 all-lib: gnulib/Makefile
1160         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1161 .PHONY: all-lib
1162
1163 # Create a library of the gdb object files and build GDB by linking
1164 # against that.
1165 #
1166 # init.o is very important.  It pulls in the rest of GDB.
1167 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1168 libgdb.a: $(LIBGDB_OBS)
1169         -rm -f libgdb.a
1170         $(AR) q libgdb.a $(LIBGDB_OBS)
1171         $(RANLIB) libgdb.a
1172
1173 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1174 # on itself without copying the executable.  So "make gdb1" will make
1175 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1176 # Removing gdb1 before the copy is the right thing if gdb1 is open
1177 # in another process.
1178 gdb1$(EXEEXT): gdb$(EXEEXT)
1179         rm -f gdb1$(EXEEXT)
1180         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1181
1182 # Put the proper machine-specific files first, so M-. on a machine
1183 # specific routine gets the one for the correct machine.  (FIXME: those
1184 # files go in twice; we should be removing them from the main list).
1185
1186 # TAGS depends on all the files that go into it so you can rebuild TAGS
1187 # with `make TAGS' and not have to say `rm TAGS' first.
1188
1189 GDB_NM_FILE = @GDB_NM_FILE@
1190 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1191         @echo Making TAGS
1192         @etags $(srcdir)/$(GDB_NM_FILE) \
1193         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1194                 echo $(srcdir)/$$i ; \
1195         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1196                 echo $$i ; \
1197         done) | sed -e 's/\.o$$/\.c/'` \
1198         `find $(srcdir)/config -name '*.h' -print`
1199
1200 tags: TAGS
1201
1202 clean mostlyclean: $(CONFIG_CLEAN)
1203         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1204         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1205         rm -f init.c version.c
1206         rm -f gdb$(EXEEXT) core make.log
1207         rm -f gdb[0-9]$(EXEEXT)
1208         rm -f test-cp-name-parser$(EXEEXT)
1209         rm -f xml-builtin.c stamp-xml
1210         rm -f $(DEPDIR)/*
1211
1212 .PHONY: clean-tui
1213 clean-tui:
1214         rm -f $(TUI)$(EXEEXT)
1215
1216 # This used to depend on c-exp.c m2-exp.c TAGS
1217 # I believe this is wrong; the makefile standards for distclean just
1218 # describe removing files; the only sort of "re-create a distribution"
1219 # functionality described is if the distributed files are unmodified.
1220 # NB: While GDBSERVER might be configured on native systems, it isn't
1221 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1222 distclean: clean
1223         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1224         rm -f gdbserver/config.status gdbserver/config.log
1225         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1226         rm -f gdbserver/Makefile gdbserver/config.cache
1227         rm -f nm.h config.status config.h stamp-h .gdbinit
1228         rm -f y.output yacc.acts yacc.tmp y.tab.h
1229         rm -f config.log config.cache
1230         rm -f Makefile
1231         rm -rf $(DEPDIR)
1232
1233 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1234 realclean: maintainer-clean
1235
1236 local-maintainer-clean:
1237         @echo "This command is intended for maintainers to use;"
1238         @echo "it deletes files that may require special tools to rebuild."
1239         rm -f c-exp.c \
1240                 cp-name-parser.c \
1241                 ada-lex.c ada-exp.c \
1242                 objc-exp.c \
1243                 jv-exp.tab \
1244                 f-exp.c m2-exp.c p-exp.c
1245         rm -f TAGS $(INFOFILES)
1246         rm -f $(YYFILES)
1247         rm -f nm.h config.status
1248
1249 do-maintainer-clean:
1250         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1251                 subdir_do
1252
1253 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1254         cd doc; $(MAKE) $(MFLAGS) diststuff
1255
1256 subdir_do: force
1257         @for i in $(DODIRS); do \
1258                 if [ -f ./$$i/Makefile ] ; then \
1259                         if (cd ./$$i; \
1260                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1261                         else exit 1 ; fi ; \
1262                 else true ; fi ; \
1263         done
1264
1265 Makefile: Makefile.in config.status @frags@
1266         # Regenerate the Makefile and the tm.h / nm.h links.
1267         CONFIG_FILES="Makefile" \
1268           CONFIG_COMMANDS= \
1269           CONFIG_HEADERS= \
1270           $(SHELL) config.status
1271
1272 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1273         CONFIG_FILES="gnulib/Makefile" \
1274           CONFIG_COMMANDS="depfiles" \
1275           CONFIG_HEADERS= \
1276           CONFIG_LINKS= \
1277           $(SHELL) config.status
1278
1279 config.h: stamp-h ; @true
1280 stamp-h: $(srcdir)/config.in config.status
1281         CONFIG_HEADERS=config.h:config.in \
1282           CONFIG_COMMANDS="default depdir" \
1283           CONFIG_FILES= \
1284           CONFIG_LINKS= \
1285           $(SHELL) config.status
1286
1287 config.status: $(srcdir)/configure configure.tgt configure.host
1288         $(SHELL) config.status --recheck
1289
1290 ACLOCAL = aclocal
1291 ACLOCAL_AMFLAGS = -I gnulib/m4
1292 aclocal_m4_deps = \
1293         configure.ac \
1294         gnulib/m4/extensions.m4 \
1295         gnulib/m4/gnulib-common.m4 \
1296         gnulib/m4/gnulib-comp.m4 \
1297         gnulib/m4/include_next.m4 \
1298         gnulib/m4/longlong.m4 \
1299         gnulib/m4/memchr.m4 \
1300         gnulib/m4/memcmp.m4 \
1301         gnulib/m4/memmem.m4 \
1302         gnulib/m4/onceonly_2_57.m4 \
1303         gnulib/m4/stdint.m4 \
1304         gnulib/m4/string_h.m4 \
1305         gnulib/m4/wchar.m4 \
1306         ../config/extensions.m4 \
1307         ../config/lead-dot.m4 \
1308         ../config/proginstall.m4 \
1309         ../bfd/bfd.m4 \
1310         ../config/acinclude.m4 \
1311         ../config/override.m4 \
1312         ../config/gettext-sister.m4 \
1313         ../config/lib-ld.m4 \
1314         ../config/lib-prefix.m4 \
1315         ../config/lib-link.m4 \
1316         ../config/acx.m4 \
1317         ../config/tcl.m4 \
1318         ../config/depstand.m4 \
1319         ../config/lcmessage.m4 \
1320         ../config/codeset.m4
1321
1322 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
1323         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1324
1325 AUTOCONF = autoconf
1326 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
1327 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1328         cd $(srcdir) && $(AUTOCONF)
1329
1330 AUTOHEADER = autoheader
1331 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1332         cd $(srcdir) && $(AUTOHEADER)
1333         rm -f stamp-h
1334         touch $@
1335
1336 # automatic rebuilding in automake-generated Makefiles requires
1337 # this rule in the toplevel Makefile, which, with GNU make, causes
1338 # the desired updates through the implicit regeneration of the Makefile
1339 # and all of its prerequisites.
1340 am--refresh:
1341         @:
1342
1343 force:
1344
1345 # Documentation!
1346 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1347 doc/refcard.dvi:
1348         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1349
1350 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1351 doc/refcard.ps:
1352         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1353
1354 # GDB MANUAL: TeX dvi file
1355 doc/gdb.dvi:
1356         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1357
1358 # GDB MANUAL: info file
1359 doc/gdb.info:
1360         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1361
1362 # Make copying.c from COPYING
1363 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1364         awk -f $(srcdir)/copying.awk \
1365                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1366         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1367
1368 version.c: Makefile version.in
1369         rm -f version.c-tmp version.c
1370         echo '#include "version.h"' >> version.c-tmp
1371         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1372         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1373         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1374         mv version.c-tmp version.c
1375
1376 observer.h: observer.sh doc/observer.texi
1377         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1378
1379 observer.inc: observer.sh doc/observer.texi
1380         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1381
1382 lint: $(LINTFILES)
1383         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1384            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1385
1386 gdb.cxref: $(SFILES)
1387         cxref -I. $(SFILES) >gdb.cxref
1388
1389 force_update:
1390
1391 # GNU Make has an annoying habit of putting *all* the Makefile variables
1392 # into the environment, unless you include this target as a circumvention.
1393 # Rumor is that this will be fixed (and this target can be removed)
1394 # in GNU Make 4.0.
1395 .NOEXPORT:
1396
1397 # GNU Make 3.63 has a different problem: it keeps tacking command line
1398 # overrides onto the definition of $(MAKE).  This variable setting
1399 # will remove them.
1400 MAKEOVERRIDES=
1401
1402 ALLDEPFILES = \
1403         aix-thread.c \
1404         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1405         alpha-tdep.c alpha-mdebug-tdep.c \
1406         alpha-linux-tdep.c alpha-osf1-tdep.c \
1407         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1408         amd64-nat.c amd64-tdep.c \
1409         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1410         amd64nbsd-nat.c amd64nbsd-tdep.c \
1411         amd64obsd-nat.c amd64obsd-tdep.c \
1412         amd64-darwin-tdep.c \
1413         amd64-dicos-tdep.c \
1414         amd64-linux-nat.c amd64-linux-tdep.c \
1415         amd64-sol2-tdep.c \
1416         arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1417         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1418         avr-tdep.c \
1419         bsd-uthread.c bsd-kvm.c \
1420         core-regset.c corelow.c \
1421         dcache.c dicos-tdep.c darwin-nat.c \
1422         exec.c \
1423         fbsd-nat.c \
1424         fork-child.c \
1425         glibc-tdep.c \
1426         go32-nat.c h8300-tdep.c \
1427         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1428         hppa-linux-tdep.c hppa-linux-nat.c \
1429         hppabsd-nat.c hppabsd-tdep.c \
1430         hppaobsd-tdep.c \
1431         hppanbsd-nat.c hppanbsd-tdep.c \
1432         i386-tdep.c i386-linux-nat.c \
1433         i386v4-nat.c i386-cygwin-tdep.c \
1434         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1435         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1436         i387-tdep.c \
1437         i386-darwin-tdep.c i386-darwin-nat.c \
1438         i386-dicos-tdep.c \
1439         i386-linux-tdep.c i386-nat.c \
1440         i386-sol2-nat.c i386-sol2-tdep.c \
1441         i386gnu-nat.c i386gnu-tdep.c \
1442         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1443         inf-ptrace.c inf-ttrace.c \
1444         irix5-nat.c \
1445         libunwind-frame.c \
1446         linux-fork.c \
1447         linux-tdep.c \
1448         linux-record.c \
1449         lm32-tdep.c \
1450         m68hc11-tdep.c \
1451         m32r-tdep.c \
1452         m32r-linux-nat.c m32r-linux-tdep.c \
1453         m68k-tdep.c \
1454         m68kbsd-nat.c m68kbsd-tdep.c \
1455         m68klinux-nat.c m68klinux-tdep.c \
1456         m88k-tdep.c m88kbsd-nat.c \
1457         microblaze-tdep.c microblaze-linux-tdep.c \
1458         mingw-hdep.c \
1459         mips-linux-nat.c mips-linux-tdep.c \
1460         mips-irix-tdep.c \
1461         mips-tdep.c \
1462         mipsnbsd-nat.c mipsnbsd-tdep.c \
1463         mips64obsd-nat.c mips64obsd-tdep.c \
1464         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1465         solib-osf.c \
1466         solib-target.c \
1467         somread.c solib-som.c \
1468         posix-hdep.c \
1469         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1470         ppcnbsd-nat.c ppcnbsd-tdep.c \
1471         ppcobsd-nat.c ppcobsd-tdep.c \
1472         procfs.c \
1473         remote-m32r-sdi.c remote-mips.c \
1474         remote-sim.c \
1475         dcache.c \
1476         rs6000-nat.c rs6000-tdep.c \
1477         s390-tdep.c s390-nat.c \
1478         score-tdep.c \
1479         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1480         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1481         sol2-tdep.c \
1482         solib-irix.c solib-svr4.c solib-sunos.c \
1483         sparc-linux-nat.c sparc-linux-tdep.c \
1484         sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1485         sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1486         sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1487         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1488         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1489         spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1490         v850-tdep.c \
1491         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1492         windows-nat.c windows-tdep.c \
1493         xcoffread.c xcoffsolib.c \
1494         xstormy16-tdep.c \
1495         xtensa-tdep.c xtensa-config.c \
1496         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1497
1498 # Some files need explicit build rules (due to -Werror problems) or due
1499 # to sub-directory fun 'n' games.
1500
1501 hpux-thread.o: $(srcdir)/hpux-thread.c
1502         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1503                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1504         $(POSTCOMPILE)
1505
1506 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1507 main.o: $(srcdir)/main.c
1508         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1509         $(POSTCOMPILE)
1510
1511 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1512 # errors.  It turns out that that is the least of monitor.c's
1513 # problems.  The function print_vsprintf appears to be using
1514 # va_arg(long) to extract CORE_ADDR parameters - something that
1515 # definitly will not work.  "monitor.c" needs to be rewritten so that
1516 # it doesn't use format strings and instead uses callbacks.
1517 monitor.o: $(srcdir)/monitor.c
1518         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1519         $(POSTCOMPILE)
1520
1521 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1522 # checks format strings.
1523 printcmd.o: $(srcdir)/printcmd.c
1524         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1525                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1526         $(POSTCOMPILE)
1527
1528 # Message files.  Based on code in gcc/Makefile.in.
1529
1530 # Rules for generating translated message descriptions.  Disabled by
1531 # autoconf if the tools are not available.
1532
1533 .SUFFIXES: .po .gmo .pox .pot
1534 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1535
1536 all-po: $(CATALOGS)
1537
1538 # This notation should be acceptable to all Make implementations used
1539 # by people who are interested in updating .po files.
1540 update-po: $(CATALOGS:.gmo=.pox)
1541
1542 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1543 # script does that.
1544 .po.gmo:
1545         -test -d po || mkdir po
1546         $(GMSGFMT) --statistics -o $@ $<
1547
1548 # The new .po has to be gone over by hand, so we deposit it into
1549 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1550 # exists, use it (it was just created), else use the one in srcdir.
1551 .po.pox:
1552         -test -d po || mkdir po
1553         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1554                         then echo po/$(PACKAGE).pot; \
1555                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1556
1557 # This rule has to look for .gmo modules in both srcdir and the cwd,
1558 # and has to check that we actually have a catalog for each language,
1559 # in case they weren't built or included with the distribution.
1560 install-po:
1561         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1562         cats="$(CATALOGS)"; for cat in $$cats; do \
1563           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1564           if [ -f $$cat ]; then :; \
1565           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1566           else continue; \
1567           fi; \
1568           dir=$(localedir)/$$lang/LC_MESSAGES; \
1569           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1570           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1571           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1572           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1573         done
1574 uninstall-po:
1575         cats="$(CATALOGS)"; for cat in $$cats; do \
1576           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1577           if [ -f $$cat ]; then :; \
1578           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1579           else continue; \
1580           fi; \
1581           dir=$(localedir)/$$lang/LC_MESSAGES; \
1582           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1583         done
1584 # Delete po/*.gmo only if we are not building in the source directory.
1585 clean-po:
1586         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1587
1588 # Rule for regenerating the message template (gdb.pot).  Instead of
1589 # forcing everyone to edit POTFILES.in, which proved impractical, this
1590 # rule has no dependencies and always regenerates gdb.pot.  This is
1591 # relatively harmless since the .po files do not directly depend on
1592 # it.  The .pot file is left in the build directory.  Since GDB's
1593 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1594 # files) force this rule.
1595 $(PACKAGE).pot: po/$(PACKAGE).pot
1596 po/$(PACKAGE).pot: force
1597         -test -d po || mkdir po
1598         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1599
1600
1601 #
1602 # YACC/LEX dependencies
1603 #
1604 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1605 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1606 # said LANG-exp.c rather than ./c-exp.c some makes would
1607 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1608 # decls for malloc/realloc/free which conflict with everything else.
1609 # Strictly speaking c-exp.c should therefore depend on
1610 # Makefile.in, but that was a pretty big annoyance.
1611
1612 .SUFFIXES: .y .l
1613 .y.c:
1614         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1615         -sed -e '/extern.*malloc/d' \
1616              -e '/extern.*realloc/d' \
1617              -e '/extern.*free/d' \
1618              -e '/include.*malloc.h/d' \
1619              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1620              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1621              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1622              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1623              -e '/^#line.*y.tab.c/d' \
1624           < $@.tmp > $@.new
1625         -rm $@.tmp
1626         mv $@.new ./$*.c
1627 .l.c:
1628         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1629             $(FLEX) -o$@ $< && \
1630             rm -f $@.new && \
1631             sed -e '/extern.*malloc/d' \
1632                 -e '/extern.*realloc/d' \
1633                 -e '/extern.*free/d' \
1634                 -e '/include.*malloc.h/d' \
1635                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1636                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1637                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1638                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1639                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1640               < $@ > $@.new && \
1641             rm -f $@ && \
1642             mv $@.new $@; \
1643         elif [ -f $@ ]; then \
1644             echo "Warning: $*.c older than $*.l and flex not available."; \
1645         else \
1646             echo "$@ missing and flex not available."; \
1647             false; \
1648         fi
1649
1650 .PRECIOUS: ada-exp.c ada-lex.c
1651 .PRECIOUS: c-exp.c
1652 .PRECIOUS: f-exp.c
1653 .PRECIOUS: jv-exp.c
1654 .PRECIOUS: m2-exp.c
1655 .PRECIOUS: objc-exp.c
1656 .PRECIOUS: p-exp.c
1657
1658 # XML rules
1659
1660 xml-builtin.c: stamp-xml; @true
1661 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1662         rm -f xml-builtin.tmp
1663         AWK="$(AWK)" \
1664           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1665           xml-builtin.tmp $(XMLFILES)
1666         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1667         echo stamp > stamp-xml
1668
1669 .PRECIOUS: xml-builtin.c
1670
1671 #
1672 # gdb/cli/ dependencies
1673 #
1674 # Need to explicitly specify the compile rule as make will do nothing
1675 # or try to compile the object file into the sub-directory.
1676
1677 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1678         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1679         $(POSTCOMPILE)
1680
1681 cli-decode.o: $(srcdir)/cli/cli-decode.c
1682         $(COMPILE) $(srcdir)/cli/cli-decode.c
1683         $(POSTCOMPILE)
1684
1685 cli-dump.o: $(srcdir)/cli/cli-dump.c
1686         $(COMPILE) $(srcdir)/cli/cli-dump.c
1687         $(POSTCOMPILE)
1688
1689 cli-interp.o: $(srcdir)/cli/cli-interp.c
1690         $(COMPILE) $(srcdir)/cli/cli-interp.c
1691         $(POSTCOMPILE)
1692
1693 cli-logging.o: $(srcdir)/cli/cli-logging.c
1694         $(COMPILE) $(srcdir)/cli/cli-logging.c
1695         $(POSTCOMPILE)
1696
1697 cli-script.o: $(srcdir)/cli/cli-script.c
1698         $(COMPILE) $(srcdir)/cli/cli-script.c
1699         $(POSTCOMPILE)
1700
1701 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1702         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1703         $(POSTCOMPILE)
1704
1705
1706 #
1707 # GDBTK sub-directory
1708 #
1709 # Need to explicitly specify the compile rule as make will do nothing
1710 # or try to compile the object file into the mi directory.
1711
1712 all-gdbtk: insight$(EXEEXT)
1713
1714 install-gdbtk:
1715         transformed_name=`t='$(program_transform_name)'; \
1716                   echo insight | sed -e $$t` ; \
1717         if test "x$$transformed_name" = x; then \
1718           transformed_name=insight ; \
1719         else \
1720           true ; \
1721         fi ; \
1722         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1723         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1724                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1725         $(SHELL) $(srcdir)/../mkinstalldirs \
1726                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1727         $(SHELL) $(srcdir)/../mkinstalldirs \
1728                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1729         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1730                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1731         $(SHELL) $(srcdir)/../mkinstalldirs \
1732                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1733                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1734         $(SHELL) $(srcdir)/../mkinstalldirs \
1735                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1736                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1737                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1738         cd $(srcdir)/gdbtk/library ; \
1739         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1740           do \
1741                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1742           done ;
1743
1744 uninstall-gdbtk:
1745         transformed_name=`t='$(program_transform_name)'; \
1746                   echo insight | sed -e $$t` ; \
1747         if test "x$$transformed_name" = x; then \
1748                 transformed_name=insight ; \
1749         else \
1750                 true ; \
1751         fi ; \
1752         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1753         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1754
1755 clean-gdbtk:
1756         rm -f insight$(EXEEXT)
1757
1758 # Removing the old gdb first works better if it is running, at least on SunOS.
1759 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1760                 $(CDEPS) $(TDEPLIBS)
1761         rm -f insight$(EXEEXT)
1762         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1763                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1764                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1765
1766 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1767         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1768
1769 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1770                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1771                 $(GDBTK_CFLAGS) \
1772                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1773                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1774
1775 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1776         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1777         $(POSTCOMPILE)
1778
1779 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1780         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1781         $(POSTCOMPILE)
1782
1783 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1784         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1785         $(POSTCOMPILE)
1786
1787 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1788         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1789         $(POSTCOMPILE)
1790
1791 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1792         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1793         $(POSTCOMPILE)
1794
1795 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1796         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1797         $(POSTCOMPILE)
1798
1799 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1800         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1801         $(POSTCOMPILE)
1802
1803 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1804         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1805         $(POSTCOMPILE)
1806
1807 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1808         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1809         $(POSTCOMPILE)
1810
1811 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1812         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1813         $(POSTCOMPILE)
1814
1815
1816 #
1817 # gdb/mi/ dependencies
1818 #
1819 # Need to explicitly specify the compile rule as make will do nothing
1820 # or try to compile the object file into the sub-directory.
1821
1822 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1823         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1824         $(POSTCOMPILE)
1825
1826 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1827         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1828         $(POSTCOMPILE)
1829
1830 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1831         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1832         $(POSTCOMPILE)
1833
1834 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1835         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1836         $(POSTCOMPILE)
1837
1838 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1839         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1840         $(POSTCOMPILE)
1841
1842 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1843         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1844         $(POSTCOMPILE)
1845
1846 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1847         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1848         $(POSTCOMPILE)
1849
1850 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1851         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1852         $(POSTCOMPILE)
1853
1854 mi-console.o: $(srcdir)/mi/mi-console.c
1855         $(COMPILE) $(srcdir)/mi/mi-console.c
1856         $(POSTCOMPILE)
1857
1858 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1859         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1860         $(POSTCOMPILE)
1861
1862 mi-interp.o: $(srcdir)/mi/mi-interp.c
1863         $(COMPILE) $(srcdir)/mi/mi-interp.c
1864         $(POSTCOMPILE)
1865
1866 mi-main.o: $(srcdir)/mi/mi-main.c
1867         $(COMPILE) $(srcdir)/mi/mi-main.c
1868         $(POSTCOMPILE)
1869
1870 mi-out.o: $(srcdir)/mi/mi-out.c
1871         $(COMPILE) $(srcdir)/mi/mi-out.c
1872         $(POSTCOMPILE)
1873
1874 mi-parse.o: $(srcdir)/mi/mi-parse.c
1875         $(COMPILE) $(srcdir)/mi/mi-parse.c
1876         $(POSTCOMPILE)
1877
1878 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1879         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1880         $(POSTCOMPILE)
1881
1882 mi-common.o: $(srcdir)/mi/mi-common.c
1883         $(COMPILE) $(srcdir)/mi/mi-common.c
1884         $(POSTCOMPILE)
1885
1886 #
1887 # gdb/common/ dependencies
1888 #
1889 # Need to explicitly specify the compile rule as make will do nothing
1890 # or try to compile the object file into the sub-directory.
1891
1892 signals.o: $(srcdir)/common/signals.c
1893         $(COMPILE) $(srcdir)/common/signals.c
1894         $(POSTCOMPILE)
1895
1896 #
1897 # gdb/tui/ dependencies
1898 #
1899 # Need to explicitly specify the compile rule as make will do nothing
1900 # or try to compile the object file into the sub-directory.
1901
1902 tui.o: $(srcdir)/tui/tui.c
1903         $(COMPILE) $(srcdir)/tui/tui.c
1904         $(POSTCOMPILE)
1905
1906 tui-command.o: $(srcdir)/tui/tui-command.c
1907         $(COMPILE) $(srcdir)/tui/tui-command.c
1908         $(POSTCOMPILE)
1909
1910 tui-data.o: $(srcdir)/tui/tui-data.c
1911         $(COMPILE) $(srcdir)/tui/tui-data.c
1912         $(POSTCOMPILE)
1913
1914 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1915         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1916         $(POSTCOMPILE)
1917
1918 tui-file.o: $(srcdir)/tui/tui-file.c
1919         $(COMPILE) $(srcdir)/tui/tui-file.c
1920         $(POSTCOMPILE)
1921
1922 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1923         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1924         $(POSTCOMPILE)
1925
1926 tui-interp.o: $(srcdir)/tui/tui-interp.c
1927         $(COMPILE) $(srcdir)/tui/tui-interp.c
1928         $(POSTCOMPILE)
1929
1930 tui-io.o: $(srcdir)/tui/tui-io.c
1931         $(COMPILE) $(srcdir)/tui/tui-io.c
1932         $(POSTCOMPILE)
1933
1934 tui-layout.o: $(srcdir)/tui/tui-layout.c
1935         $(COMPILE) $(srcdir)/tui/tui-layout.c
1936         $(POSTCOMPILE)
1937
1938 tui-main.o: $(srcdir)/tui/tui-main.c
1939         $(COMPILE) $(srcdir)/tui/tui-main.c
1940         $(POSTCOMPILE)
1941
1942 tui-out.o: $(srcdir)/tui/tui-out.c
1943         $(COMPILE) $(srcdir)/tui/tui-out.c
1944         $(POSTCOMPILE)
1945
1946 tui-regs.o: $(srcdir)/tui/tui-regs.c
1947         $(COMPILE) $(srcdir)/tui/tui-regs.c
1948         $(POSTCOMPILE)
1949
1950 tui-source.o: $(srcdir)/tui/tui-source.c
1951         $(COMPILE) $(srcdir)/tui/tui-source.c
1952         $(POSTCOMPILE)
1953
1954 tui-stack.o: $(srcdir)/tui/tui-stack.c
1955         $(COMPILE) $(srcdir)/tui/tui-stack.c
1956         $(POSTCOMPILE)
1957
1958 tui-win.o: $(srcdir)/tui/tui-win.c
1959         $(COMPILE) $(srcdir)/tui/tui-win.c
1960         $(POSTCOMPILE)
1961
1962 tui-windata.o: $(srcdir)/tui/tui-windata.c
1963         $(COMPILE) $(srcdir)/tui/tui-windata.c
1964         $(POSTCOMPILE)
1965
1966 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1967         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1968         $(POSTCOMPILE)
1969
1970 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1971         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1972         $(POSTCOMPILE)
1973
1974 #
1975 # gdb/python/ dependencies
1976 #
1977 # Need to explicitly specify the compile rule as make will do nothing
1978 # or try to compile the object file into the sub-directory.
1979
1980 # Flags needed to compile Python code
1981 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1982
1983 python.o: $(srcdir)/python/python.c
1984         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1985         $(POSTCOMPILE)
1986
1987 py-block.o: $(srcdir)/python/py-block.c
1988         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
1989         $(POSTCOMPILE)
1990
1991 py-breakpoint.o: $(srcdir)/python/py-breakpoint.c
1992         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c
1993         $(POSTCOMPILE)
1994
1995 py-cmd.o: $(srcdir)/python/py-cmd.c
1996         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
1997         $(POSTCOMPILE)
1998
1999 py-frame.o: $(srcdir)/python/py-frame.c
2000         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
2001         $(POSTCOMPILE)
2002
2003 py-function.o: $(srcdir)/python/py-function.c
2004         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
2005         $(POSTCOMPILE)
2006
2007 py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
2008         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
2009         $(POSTCOMPILE)
2010
2011 py-objfile.o: $(srcdir)/python/py-objfile.c
2012         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
2013         $(POSTCOMPILE)
2014
2015 py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
2016         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
2017         $(POSTCOMPILE)
2018
2019 py-symbol.o: $(srcdir)/python/py-symbol.c
2020         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
2021         $(POSTCOMPILE)
2022
2023 py-symtab.o: $(srcdir)/python/py-symtab.c
2024         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
2025         $(POSTCOMPILE)
2026
2027 py-type.o: $(srcdir)/python/py-type.c
2028         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
2029         $(POSTCOMPILE)
2030
2031 py-utils.o: $(srcdir)/python/py-utils.c
2032         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
2033         $(POSTCOMPILE)
2034
2035 py-value.o: $(srcdir)/python/py-value.c
2036         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
2037         $(POSTCOMPILE)
2038
2039 #
2040 # Dependency tracking.  Most of this is conditional on GNU Make being
2041 # found by configure; if GNU Make is not found, we fall back to a
2042 # simpler scheme.
2043 #
2044
2045 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
2046 # Note that we put the dependencies into a .Tpo file, then move them
2047 # into place if the compile succeeds.  We need this because gcc does
2048 # not atomically write the dependency output file.
2049 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2050 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
2051 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
2052 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
2053 @GMAKE_TRUE@else
2054 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
2055 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
2056 # depcomp handles atomicity for us, so we don't need a postcompile
2057 # step.
2058 @GMAKE_TRUE@override POSTCOMPILE =
2059 @GMAKE_TRUE@endif
2060
2061 # A list of all the objects we might care about in this build, for
2062 # dependency tracking.
2063 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
2064         test-cp-name-parser.o
2065
2066 # Ensure that generated files are created early.  Use order-only
2067 # dependencies if available.  They require GNU make 3.80 or newer,
2068 # and the .VARIABLES variable was introduced at the same time.
2069 @GMAKE_TRUE@ifdef .VARIABLES
2070 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
2071 @GMAKE_TRUE@else
2072 $(all_object_files) : $(generated_files)
2073 @GMAKE_TRUE@endif
2074
2075 # Dependencies.
2076 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
2077
2078 ### end of the gdb Makefile.in.