gdb/Makefile.in

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Host and target-dependent makefile fragments come in here.
  20 ####
  21 # End of host and target-dependent makefile fragments
  22
  23 # Destination directory of the software tree build
  24 ddestdir = /usr/local
  25
  26 # Place to install binaries in the destination tree.
  27 bindir=$(ddestdir)/bin
  28
  29 # System V: If you compile gdb with a compiler which uses the coff
  30 # encapsulation feature (this is a function of the compiler used, NOT
  31 # of the m-?.h file selected by config.gdb), you must make sure that
  32 # the GNU nm is the one that is used by munch.
  33
  34 # If you are compiling with GCC, make sure that either 1) You use the
  35 # -traditional flag, or 2) You have the fixed include files where GCC
  36 # can reach them.  Otherwise the ioctl calls in inflow.c
  37 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  38 # distribution will fix your include files up.
  39 #CC=cc
  40 #CC=gcc -traditional
  41 GCC=gcc
  42
  43 # Directory containing source files.  Don't clean up the spacing,
  44 # this exact string is matched for by the "configure" script.
  45 srcdir = .
  46
  47 # It is also possible that you will need to add -I/usr/include/sys to the
  48 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  49 # is where it should be according to Posix).
  50
  51 BISON=bison -y
  52 BISONFLAGS=
  53 YACC=$(BISON) $(BISONFLAGS)
  54 # YACC=yacc
  55 SHELL=/bin/sh
  56 MAKE=make
  57
  58 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
  59 # Berkeley/Sun don't have quite enough.
  60 #M4=/usr/5bin/m4
  61 M4=gm4
  62
  63 # where to find texinfo; GDB dist should include a recent one
  64 TEXIDIR=${srcdir}/../texinfo/fsf
  65
  66 # where to find makeinfo, preferably one designed for texinfo-2
  67 MAKEINFO=makeinfo
  68
  69 # Set this up with gcc if you have gnu ld and the loader will print out
  70 # line numbers for undefinded refs.
  71 #CC-LD=gcc -static
  72 CC-LD=${CC}
  73
  74 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  75 # (useful for debugging memory allocation problems in gdb).  To use your
  76 # system malloc, uncomment the following two lines.
  77 #GNU_MALLOC =
  78 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  79 GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
  80 MALLOC_CFLAGS =
  81
  82 # Where is the "include" directory?  Traditionally ../include or ./include
  83 INCLUDE_DIR =  ${srcdir}/../include
  84 INCLUDE_DEP = $$(INCLUDE_DIR)
  85
  86 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
  87 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
  88 BFD_DIR =  ${srcdir}/../bfd
  89 BFD_DEP = $$(BFD_DIR)
  90 BFD_LIB = $(unsubdir)/../bfd${subdir}/libbfd.a
  91
  92 # Where is the source dir for the READLINE library?  Traditionally in .. or .
  93 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
  94 READLINE_DIR = ${srcdir}/../readline
  95 READLINE_DEP = $$(READLINE_DIR)
  96 RL_LIB = $(unsubdir)/../readline${subdir}/libreadline.a
  97
  98 # All the includes used for CFLAGS and for lint.
  99 # -I. for config files.
 100 # -I${srcdir} possibly for regex.h also.
 101 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
 102
 103 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
 104 # CFLAGS for GDB
 105 GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
 106 #PROFILE_CFLAGS = -pg
 107
 108 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
 109 # None of the things in CFLAGS will do any harm, and on some systems
 110 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
 111 LDFLAGS = $(CFLAGS)
 112
 113 # Where is the "-liberty" library, containing getopt and obstack?
 114 LIBIBERTY_DIR = ${srcdir}/../libiberty
 115 LIBIBERTY = $(unsubdir)/../libiberty${subdir}/libiberty.a
 116
 117 # Flags that describe where you can find the termcap library.
 118 # You may need to make other arrangements for USG.
 119 TERMCAP = -ltermcap
 120
 121 # The xconfig file must define REGEX and REGEX1 on USG machines.
 122 # If your sysyem is missing alloca(), or, more likely, it's there but
 123 # it doesn't work, define ALLOCA & ALLOCA1 too.
 124 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
 125
 126 # Libraries and corresponding dependencies for compiling gdb.
 127 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 128 # TERMCAP comes after readline, since readline depends on it.
 129 CLIBS = ${BFD_LIB}  ${RL_LIB} ${TERMCAP} ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS}
 130 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
 131
 132 ADD_FILES = ${REGEX} ${ALLOCA}  ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 133 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 134
 135 VERSION = 4.2.2
 136 DIST=gdb
 137
 138 LINT=/usr/5bin/lint
 139 LINTFLAGS=
 140
 141 # Source files in the main directory.
 142 # Files which are included via a tconfig/* or xconfig/* file
 143 # should *not* be specified here; they're in "ALLDEPFILES".
 144 SFILES_MAINDIR = \
 145          blockframe.c breakpoint.c command.c core.c \
 146          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 147          main.c printcmd.c \
 148          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 149          utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
 150          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 151          dbxread.c coffread.c elfread.c dwarfread.c \
 152          ieee-float.c language.c parse.c buildsym.c
 153 #        xcoffread.c xcoffexec.c \
 154
 155 # Source files in subdirectories (which will be handled separately by
 156 #  'make gdb.tar.Z').
 157 # Files which are included via a tconfig/* or xconfig/* file
 158 # should *not* be specified here; they're in "ALLDEPFILES".
 159 SFILES_SUBDIR = \
 160          ${srcdir}/vx-share/dbgRpcLib.h \
 161          ${srcdir}/vx-share/ptrace.h \
 162          ${srcdir}/vx-share/reg.h \
 163          ${srcdir}/vx-share/vxTypes.h \
 164          ${srcdir}/vx-share/vxWorks.h \
 165          ${srcdir}/vx-share/wait.h \
 166          ${srcdir}/vx-share/xdr_ld.h \
 167          ${srcdir}/vx-share/xdr_ptrace.h \
 168          ${srcdir}/vx-share/xdr_rdb.h \
 169          ${srcdir}/vx-share/xdr_regs.h \
 170          ${srcdir}/nindy-share/b.out.h \
 171          ${srcdir}/nindy-share/block_io.h \
 172          ${srcdir}/nindy-share/coff.h \
 173          ${srcdir}/nindy-share/demux.h \
 174          ${srcdir}/nindy-share/env.h \
 175          ${srcdir}/nindy-share/stop.h \
 176          ${srcdir}/nindy-share/ttycntl.h
 177
 178 # Non-source files in subdirs, that should go into gdb.tar.Z.
 179 NONSRC_SUBDIR = \
 180          ${srcdir}/nindy-share/Makefile \
 181          ${srcdir}/nindy-share/VERSION
 182
 183 # All source files that go into linking GDB, except config-specified files.
 184 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 185
 186 # All source files that lint should look at
 187 LINTFILES = $(SFILES) $(YYFILES) init.c
 188
 189 # Any additional files specified on these lines should also be added to
 190 # the OTHERS = definition below, so they go in the tar files.
 191 SFILES_STAND = $(SFILES) standalone.c
 192 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 193
 194 # Header files that are not named in tconfig/* or xconfig/* go here.
 195 HFILES= breakpoint.h command.h defs.h environ.h \
 196         expression.h frame.h gdbcmd.h gdbcore.h getpagesize.h \
 197         ieee-float.h inferior.h minimon.h param-no-tm.h param.h \
 198         signals.h signame.h symfile.h symtab.h \
 199         target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 200         language.h parser-defs.h value.h
 201
 202 # Header files for machine opcode tables.
 203 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
 204 # business, since they will be included in the separate includes tar file
 205 # rather than in the gdb tar file.
 206 OPCODE_DIR =
 207 OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
 208         $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
 209         $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
 210         $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
 211         $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
 212         $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
 213         $(OPCODE_DIR)tahoe-opcode.h
 214
 215 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
 216
 217 MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
 218             ansidecl.h gmalloc.h
 219
 220 POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
 221 POSSLIBS = $(POSSLIBS_MAINDIR)
 222
 223 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 224
 225 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
 226 # would try to make it from tdesc.c.
 227 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
 228 OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \
 229          ChangeLog ChangeLog-3.x refcard.ps \
 230          README TODO TAGS WHATS.NEW Projects \
 231          .gdbinit COPYING $(YYFILES) \
 232          copying.c Convex.notes copying.awk \
 233          saber.suppress standalone.c stuff.c kdb-start.c \
 234          putenv.c
 235
 236 # Subdirectories of gdb, which should be included in their entirety in
 237 # gdb-xxx.tar.Z:
 238 TARDIRS = doc # tests
 239
 240 # GDB "info" files, which should be included in their entirety
 241 INFOFILES = gdb.info*
 242
 243 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 244
 245 SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES)
 246 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 247 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 248              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 249 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 250
 251 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 252     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 253     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 254     command.o utils.o expprint.o environ.o version.o \
 255     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 256     inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
 257     buildsym.o \
 258     dbxread.o coffread.o elfread.o dwarfread.o # mipsread.o
 259 #    xcoffexec.o xcoffread.o \
 260
 261 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 262
 263 TSOBS = core.o inflow.o
 264
 265 NTSOBS = standalone.o
 266
 267 TSSTART = /lib/crt0.o
 268
 269 NTSSTART = kdb-start.o
 270
 271 # For now, shortcut the "configure GDB for fewer languages" stuff.
 272 YYFILES = c-exp.tab.c m2-exp.tab.c
 273 YYOBJ = c-exp.tab.o m2-exp.tab.o
 274
 275 # Prevent Sun make from putting in the machine type.  Setting
 276 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 277 .c.o:
 278         ${CC} -c ${CFLAGS} $<
 279
 280 all: gdb
 281
 282 install: gdb
 283         cp gdb $(bindir)/gdb.new
 284         mv $(bindir)/gdb.new $(bindir)/gdb
 285         $(M_INSTALL)
 286
 287 init.c: $(srcdir)/munch $(OBS) $(TSOBS)
 288         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 289
 290 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
 291         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 292           $(CLIBS) $(LOADLIBES)
 293
 294 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 295         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 296         #load ./init.c $(SFILES)
 297         #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
 298         #unload ${srcdir}/nindy-share/[A-Z]*
 299         #load c-exp.tab.c m2-exp.tab.c
 300         #load copying.c version.c
 301         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 302         #load ${LIBIBERTY_DIR}/*.c
 303         #load ${BFD_DIR}/*.c
 304         #load ${READLINE_DIR}/*.c
 305         #load -ltermcap
 306         ##void mcheck(a) void (*a)(); { }
 307         ##void mtrace() { }
 308
 309
 310
 311 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 312 # on itself without copying the executable.  So "make gdb1" will make
 313 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 314 # Removing gdb1 before the copy is the right thing if gdb1 is open
 315 # in another process.
 316 gdb1: gdb
 317         rm -f gdb1
 318         cp gdb gdb1
 319
 320 # This is a remote stub which runs under unix and starts up an
 321 # inferior process.  This is at least useful for debugging GDB's
 322 # remote support.
 323 rapp: $(RAPP_OBS)
 324         rm -f rapp_init.c
 325         ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
 326         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 327
 328 # Support for building Makefile out of configured pieces, automatically
 329 # generated dependencies, etc.  alldeps.mak is a file that contains
 330 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
 331 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
 332 # contents of the xconfig and tconfig subdirectories.
 333
 334 alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
 335         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 336         for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
 337             ${srcdir}/xconfig/*[0-9A-Za-z] | \
 338             grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
 339           echo $$i >>allconfig.tmp; \
 340           awk <$$i ' \
 341             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 342               for (i = 2; i <= NF; i++) \
 343                 print $$i >> "alldeps.tmp" ; \
 344             } \
 345             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 346               print $$2 >> "allparam.tmp" }' ; \
 347         done
 348         sort <alldeps.tmp | uniq | \
 349           sed -e 's/arm-convert.o/arm-convert.s/' \
 350               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 351               -e 's!^nindy.o!nindy-share/nindy.c!' \
 352               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 353               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 354               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 355               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 356               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 357               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 358               -e 's/\.o/.c/' \
 359             >alldeps2.tmp
 360         echo '# Start of "alldeps.mak" definitions' \
 361             >>alldeps.mak;
 362         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 363             >>alldeps.mak;
 364         grep -v / alldeps2.tmp | \
 365           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 366             NR == 0 {printf $$0;} \
 367             NR != 0 {printf "\\\n" $$0} \
 368             END {printf "\n\n"}' >>alldeps.mak;
 369         grep / alldeps2.tmp | \
 370           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 371             NR == 0 {printf $$0;} \
 372             NR != 0 {printf "\\\n" $$0} \
 373             END {printf "\n\n"}' >>alldeps.mak;
 374         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 375             NR == 0 {printf $$0;} \
 376             NR != 0 {printf "\\\n" $$0} \
 377             END {printf "\n\n"}' >>alldeps.mak;
 378         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 379             NR == 0 {printf $$0;} \
 380             NR != 0 {printf "\\\n" $$0} \
 381             END {printf "\n\n"}' >>alldeps.mak;
 382         echo '# End of "alldeps.mak" definitions' \
 383             >>alldeps.mak;
 384         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 385
 386 # The sed script makes everything which depends on {x,t}m.h depend on
 387 # config.status as well, in case someone reconfigures gdb out from
 388 # under an already compiled gdb.
 389 depend: $(SOURCES) Makefile.in
 390         @echo Ignore errors about non-existent system-supplied include files
 391         @echo for systems other than the one you are using.
 392         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 393         @echo can safely be ignored.
 394         @echo Also ignore parse errors in valops.c, and any errors in
 395         @echo arm-convert.s.
 396         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 397           `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
 398 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
 399 # for xm.h and tm.h.  This allows the same "depend" file to be used
 400 # by the various subdirectories.
 401         if [ "${srcdir}" = "." ] ; then \
 402           <depend.tmp sed \
 403             -e 's; ./xm.h; xm.h;g'  \
 404             -e 's; ./tm.h; tm.h;g'  \
 405             -e 's; \./; $${srcdir}/;g'  \
 406             -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 407             -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 408             >depend.tm2; \
 409           rm depend.tmp; \
 410           mv depend.tm2 depend.tmp; \
 411         fi
 412         <depend.tmp sed \
 413           -e 's; [xt]m.h;& config.status;g'  \
 414           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 415           -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
 416           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 417           -e 's; ./xm.h; xm.h config.status;g'  \
 418           -e 's; ./tm.h; tm.h config.status;g'  \
 419           >depend
 420         rm depend.tmp
 421
 422 config.status:
 423         @echo "You must configure gdb.  Look at the README file for details."
 424         @false
 425
 426 # These are not generated by "make depend" because they only are there
 427 # for some machines.
 428 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 429 # dependency to do the right thing.
 430 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
 431 tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
 432 xm-news1000.h : xm-news.h
 433 xm-i386-sv32.h : xm-i386.h
 434 tm-i386gas.h: tm-i386.h
 435 xm-sun4os4.h : xm-sparc.h
 436 tm-sun4os4.h : tm-sparc.h
 437
 438 kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
 439         rm -f init.c
 440         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 441         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 442         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 443           -lc $(CLIBS)
 444
 445 # Put the proper machine-specific files first.
 446 # createtags will edit the .o in DEPFILES into .c
 447 TAGS: ${TAGFILES}
 448         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 449 tags: TAGS
 450
 451 # Making distributions of GDB and friends.
 452
 453 # Make a directory `proto-gdb.dir' that contains an image of the GDB
 454 # directory of the distribution, built up with symlinks.
 455 make-proto-gdb.dir: force_update
 456         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 457         $(MAKE) $(MFLAGS) -f Makefile    make-proto-gdb-1
 458
 459 # Make a tar file containing the GDB directory of the distribution.
 460 gdb.tar.Z: force_update
 461         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 462         $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
 463
 464 # Set up the GDB directory for distribution, by building all files that
 465 # are products of other files.
 466 setup-to-dist: force_update
 467         ../configure none
 468         rm -f alldeps.mak
 469         $(MAKE) $(MFLAGS) alldeps.mak
 470         ../configure none
 471         rm -f depend
 472         $(MAKE) $(MFLAGS) depend
 473         ../configure none
 474         (cd doc; $(MAKE) $(MFLAGS) rdl-apps.texi gdbVN.m4)
 475         $(MAKE) $(MFLAGS) gdb.info
 476         $(MAKE) $(MFLAGS) refcard.ps
 477
 478 # Build a tar file from a proto-gdb.dir.
 479 gdb-$(VERSION).tar.Z: force_update
 480         rm -f gdb.tar gdb-$(VERSION).tar.Z
 481         $(MAKE) $(MFLAGS) -f Makefile    make-proto-gdb-1
 482         ln -s proto-gdb.dir $(DIST)
 483         tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
 484         rm -rf $(DIST) proto-gdb.dir
 485
 486 # Build a proto-gdb.dir after GDB has been set up for distribution.
 487 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
 488 # built in the setup-to-dist process, since it defines things like ALLCONFIG
 489 # and ALLDEPFILES, that we need.
 490 make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
 491         rm -rf proto-gdb.dir
 492         mkdir proto-gdb.dir
 493         cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 494         cd proto-gdb.dir ; ln -s ../${INFOFILES} .
 495         cd proto-gdb.dir ; for i in ${TARDIRS}; do \
 496           (mkdir $$i; cd $$i; \
 497           ln -s ../../$$i/* .; \
 498           rm -rf SCCS CVS.adm RCS); done
 499         mkdir proto-gdb.dir/xconfig proto-gdb.dir/tconfig
 500         cd proto-gdb.dir/tconfig ; \
 501           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 502         mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share
 503         cd proto-gdb.dir/tconfig ; \
 504           for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 505             do ln -s ../../$$i ../$$i ; done
 506         chmod og=u `find . -print`
 507
 508 clean:
 509         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 510         rm -f init.c init.o version.c
 511         rm -f gdb core gdb.tar gdb.tar.Z make.log
 512         rm -f gdb[0-9]
 513         cd $(srcdir)/doc; $(MAKE) clean
 514
 515 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
 516         rm -f tm.h xm.h config.status
 517         rm -f y.output yacc.acts yacc.tmp
 518         rm -f ${TESTS} Makefile depend
 519
 520 realclean: clean
 521         rm -f c-exp.tab.c m2-exp.tab.c TAGS
 522         rm -f tm.h xm.h config.status
 523         rm -f Makefile depend
 524
 525 STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
 526
 527 # Copy the object files from a particular stage into a subdirectory.
 528 stage1: force
 529         -mkdir stage1
 530         -mv -f $(STAGESTUFF) stage1
 531
 532 stage2: force
 533         -mkdir stage2
 534         -mv -f $(STAGESTUFF) stage2
 535
 536 stage3: force
 537         -mkdir stage3
 538         -mv -f $(STAGESTUFF) stage3
 539
 540 against=stage2
 541
 542 comparison: force
 543         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 544
 545 de-stage1: force
 546         - (cd stage1 ; mv -f * ..)
 547         - rmdir stage1
 548
 549 de-stage2: force
 550         - (cd stage2 ; mv -f * ..)
 551         - rmdir stage2
 552
 553 de-stage3: force
 554         - (cd stage3 ; mv -f * ..)
 555         - rmdir stage3
 556
 557 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
 558         $(SHELL) ./config.status
 559
 560 force:
 561
 562 # Documentation!
 563 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
 564 refcard.dvi : $(srcdir)/doc/refcard.tex
 565         ( cd $(srcdir)/doc; $(MAKE) refcard.dvi )
 566         mv $(srcdir)/doc/refcard.dvi .
 567
 568 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
 569 refcard.ps : $(srcdir)/doc/refcard.tex
 570         ( cd $(srcdir)/doc; $(MAKE) refcard.ps )
 571         mv $(srcdir)/doc/refcard.ps .
 572
 573 # GDB MANUAL: TeX dvi file
 574 gdb.dvi : $(srcdir)/doc/gdb-all.texi $(srcdir)/doc/rdl-apps.texi
 575         ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.dvi )
 576         mv $(srcdir)/doc/gdb.dvi .
 577
 578 # GDB MANUAL: info file
 579 gdb.info: $(srcdir)/doc/gdb-all.texi
 580         ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.info )
 581         mv $(srcdir)/doc/gdb.info* .
 582
 583 $(srcdir)/doc/gdb-all.texi:
 584         (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi)
 585 $(srcdir)/doc/rdl-apps.texi:
 586         (cd $(srcdir)/doc; $(MAKE) rdl-apps.texi)
 587
 588 # Make copying.c from COPYING
 589 copying.c : COPYING copying.awk
 590         awk -f copying.awk < COPYING > copying.c
 591
 592 version.c : Makefile.in
 593         echo 'char *version = "$(VERSION)";' >version.c
 594
 595 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
 596 # in srcdir, then compiled in target dir to c-exp.tab.o.
 597 c-exp.tab.o: c-exp.tab.c
 598 c-exp.tab.c: $(srcdir)/c-exp.y
 599         @echo 'Expect 4 shift/reduce conflicts.'
 600         ${YACC} $(srcdir)/c-exp.y
 601         - mv y.tab.c c-exp.tab.c
 602
 603 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
 604 # in srcdir, then compiled in target dir to m2-exp.tab.o.
 605 m2-exp.tab.o: m2-exp.tab.c
 606 m2-exp.tab.c: $(srcdir)/m2-exp.y
 607         ${YACC} $(srcdir)/m2-exp.y
 608         - mv y.tab.c m2-exp.tab.c
 609
 610 # The symbol-file readers have dependencies on BFD header files.
 611 dbxread.o: ${srcdir}/dbxread.c
 612         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 613
 614 coffread.o: ${srcdir}/coffread.c
 615         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 616
 617 mipsread.o: ${srcdir}/mipsread.c
 618         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 619
 620 elfread.o: ${srcdir}/elfread.c
 621         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
 622
 623 xcoffread.o: ${srcdir}/xcoffread.c
 624         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
 625
 626 # Drag in the files that are in another directory.
 627
 628 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 629         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 630
 631 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 632         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 633
 634 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 635         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 636
 637 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 638         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 639
 640 nindy.o: ${srcdir}/nindy-share/nindy.c
 641         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 642
 643 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 644         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 645
 646 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 647         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 648
 649 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 650         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 651
 652 tdesc-lib/libdc.o : force_update
 653         cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
 654
 655 lint: $(LINTFILES)
 656         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
 657
 658 gdb.cxref: $(SFILES)
 659         cxref -I. $(SFILES) >gdb.cxref
 660
 661 force_update :
 662
 663 # When used with GDB, the demangler should never look for leading
 664 # underscores because GDB strips them off during symbol read-in.  Thus
 665 # -Dnounderscore.
 666
 667 cplus-dem.o : cplus-dem.c
 668         ${CC} -c ${CFLAGS} -Dnounderscore \
 669           `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
 670
 671 # GNU Make has an annoying habit of putting *all* the Makefile variables
 672 # into the environment, unless you include this target as a circumvention.
 673 # Rumor is that this will be fixed (and this target can be removed)
 674 # in GNU Make 4.0.
 675 .NOEXPORT:
 676
 677 # This is the end of "Makefile.in".  When built into "Makefile"
 678 # by the configure script, two things are added below this point:
 679 #       alldeps.mak -- defintions of all files that are used in
 680 #                       host- or target-dependent configurations
 681 #       depend -- what .o files depend on what .c and .h files,
 682 #                       for all configurations.
 683
 684