gdb/Makefile.in

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Host and target-dependent makefile fragments come in here.
  20 ####
  21 # End of host and target-dependent makefile fragments
  22
  23 # Destination directory of the software tree build
  24 destdir = /usr/local
  25
  26 # Place to install binaries in the destination tree.
  27 bindir=$(destdir)/bin
  28
  29 # System V: If you compile gdb with a compiler which uses the coff
  30 # encapsulation feature (this is a function of the compiler used, NOT
  31 # of the m-?.h file selected by config.gdb), you must make sure that
  32 # the GNU nm is the one that is used by munch.
  33
  34 # If you are compiling with GCC, make sure that either 1) You use the
  35 # -traditional flag, or 2) You have the fixed include files where GCC
  36 # can reach them.  Otherwise the ioctl calls in inflow.c
  37 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  38 # distribution will fix your include files up.
  39 #CC=cc
  40 #CC=gcc -traditional
  41 GCC=gcc
  42
  43 # Directory containing source files.  Don't clean up the spacing,
  44 # this exact string is matched for by the "configure" script.
  45 srcdir = .
  46
  47 # It is also possible that you will need to add -I/usr/include/sys to the
  48 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  49 # is where it should be according to Posix).
  50
  51 BISON=bison
  52 BISONFLAGS=-y
  53 YACC=$(BISON) $(BISONFLAGS)
  54 # YACC=yacc
  55 SHELL=/bin/sh
  56 MAKE=make
  57
  58 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
  59 # Berkeley/Sun don't have quite enough.
  60 #M4=/usr/5bin/m4
  61 M4=gm4
  62
  63 # where to find texinfo; GDB dist should include a recent one
  64 TEXIDIR=${srcdir}/../texinfo/fsf
  65
  66 # where to find makeinfo, preferably one designed for texinfo-2
  67 MAKEINFO=makeinfo
  68
  69 # Set this up with gcc if you have gnu ld and the loader will print out
  70 # line numbers for undefinded refs.
  71 #CC-LD=gcc -static
  72 CC-LD=${CC}
  73
  74 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  75 # (useful for debugging memory allocation problems in gdb).  To use your
  76 # system malloc, uncomment the following two lines.
  77 #GNU_MALLOC =
  78 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  79 GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
  80 MALLOC_CFLAGS =
  81
  82 # Where is the "include" directory?  Traditionally ../include or ./include
  83 INCLUDE_DIR =  ${srcdir}/../include
  84 INCLUDE_DEP = $$(INCLUDE_DIR)
  85
  86 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
  87 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
  88 BFD_DIR =  ${srcdir}/../bfd
  89 BFD_DEP = $$(BFD_DIR)
  90 BFD_LIB = $(BFD_DIR)${subdir}/libbfd.a
  91
  92 # Where is the source dir for the READLINE library?  Traditionally in .. or .
  93 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
  94 READLINE_DIR = ${srcdir}/../readline
  95 READLINE_DEP = $$(READLINE_DIR)
  96 RL_LIB = $(READLINE_DIR)${subdir}/libreadline.a
  97
  98 # All the includes used for CFLAGS and for lint.
  99 # -I. for config files.
 100 # -I${srcdir} possibly for regex.h also.
 101 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
 102
 103 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
 104 # CFLAGS for GDB
 105 GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
 106 #PROFILE_CFLAGS = -pg
 107
 108 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
 109 # None of the things in CFLAGS will do any harm, and on some systems
 110 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
 111 LDFLAGS = $(CFLAGS)
 112
 113 # Where is the "-liberty" library, containing getopt and obstack?
 114 LIBIBERTY_DIR = ${srcdir}/../libiberty
 115 LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
 116
 117 # Flags that describe where you can find the termcap library.
 118 # You may need to make other arrangements for USG.
 119 TERMCAP = -ltermcap
 120
 121 # The xconfig file must define REGEX and REGEX1 on USG machines.
 122 # If your sysyem is missing alloca(), or, more likely, it's there but
 123 # it doesn't work, define ALLOCA & ALLOCA1 too.
 124 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
 125
 126 # Libraries and corresponding dependencies for compiling gdb.
 127 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 128 # TERMCAP comes last, since readline depends on it.
 129 CLIBS = $(XM_CLIBS) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
 130 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
 131
 132 ADD_FILES = ${REGEX} ${ALLOCA}  ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 133 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 134
 135 VERSION = 3.98.1
 136 DIST=gdb
 137
 138 LINT=/usr/5bin/lint
 139 LINTFLAGS=
 140
 141 # Source files in the main directory.
 142 # Files which are included via a tconfig/* or xconfig/* file
 143 # should *not* be specified here; they're in "ALLDEPFILES".
 144 SFILES_MAINDIR = \
 145          blockframe.c breakpoint.c command.c core.c \
 146          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 147          main.c printcmd.c \
 148          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 149          utils.c valarith.c valops.c valprint.c values.c expread.y \
 150          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 151          dbxread.c coffread.c \
 152          ieee-float.c
 153
 154 # Source files in subdirectories (which will be handled separately by
 155 #  'make gdb.tar.Z').
 156 # Files which are included via a tconfig/* or xconfig/* file
 157 # should *not* be specified here; they're in "ALLDEPFILES".
 158 SFILES_SUBDIR = \
 159          ${srcdir}/vx-share/dbgRpcLib.h \
 160          ${srcdir}/vx-share/ptrace.h \
 161          ${srcdir}/vx-share/reg.h \
 162          ${srcdir}/vx-share/vxTypes.h \
 163          ${srcdir}/vx-share/vxWorks.h \
 164          ${srcdir}/vx-share/wait.h \
 165          ${srcdir}/vx-share/xdr_ld.h \
 166          ${srcdir}/vx-share/xdr_ptrace.h \
 167          ${srcdir}/vx-share/xdr_rdb.h \
 168          ${srcdir}/vx-share/xdr_regs.h \
 169          ${srcdir}/nindy-share/b.out.h \
 170          ${srcdir}/nindy-share/block_io.h \
 171          ${srcdir}/nindy-share/coff.h \
 172          ${srcdir}/nindy-share/demux.h \
 173          ${srcdir}/nindy-share/env.h \
 174          ${srcdir}/nindy-share/stop.h \
 175          ${srcdir}/nindy-share/ttycntl.h
 176
 177 # Non-source files in subdirs, that should go into gdb.tar.Z.
 178 NONSRC_SUBDIR = \
 179          ${srcdir}/nindy-share/Makefile \
 180          ${srcdir}/nindy-share/VERSION
 181
 182 # All source files that go into linking GDB, except config-specified files.
 183 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 184
 185 # All source files that lint should look at
 186 LINTFILES = $(SFILES) expread.tab.c init.c
 187
 188 # Documentation source files
 189 SFILES_DOCDIR = \
 190         ${srcdir}/doc/gdb.texinfo    \
 191         ${srcdir}/doc/pretex.m4      \
 192         ${srcdir}/doc/none.m4        \
 193         ${srcdir}/doc/all.m4         \
 194         ${srcdir}/doc/gdbinv-m.m4   \
 195         ${srcdir}/doc/gdbinv-s.m4
 196
 197 # Any additional files specified on these lines should also be added to
 198 # the OTHERS = definition below, so they go in the tar files.
 199 SFILES_STAND = $(SFILES) standalone.c
 200 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 201
 202 # Header files that are not named in tconfig/* or xconfig/* go here.
 203 HFILES= breakpoint.h command.h defs.h environ.h \
 204         expression.h frame.h gdbcmd.h gdbcore.h \
 205         getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
 206         signals.h signame.h symfile.h symtab.h \
 207         target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 208         value.h
 209
 210 # Header files for machine opcode tables.
 211 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
 212 # business, since they will be included in the separate includes tar file
 213 # rather than in the gdb tar file.
 214 OPCODE_DIR =
 215 OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
 216         $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
 217         $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
 218         $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
 219         $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
 220         $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
 221         $(OPCODE_DIR)tahoe-opcode.h
 222
 223 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
 224
 225 MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
 226             ansidecl.h gmalloc.h
 227
 228 POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
 229 POSSLIBS = $(POSSLIBS_MAINDIR)
 230
 231 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 232
 233 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
 234 # would try to make it from tdesc.c.
 235 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
 236 OTHERS = Makefile.in depend alldeps.mak \
 237          createtags munch configure configure.in \
 238          ChangeLog ChangeLog-3.x \
 239          README TODO TAGS WHATS.NEW Projects \
 240          .gdbinit COPYING expread.tab.c \
 241          copying.c Convex.notes copying.awk \
 242          saber.suppress standalone.c stuff.c kdb-start.c \
 243          putenv.c
 244
 245 # Subdirectories of gdb, which should be included in their entirety in
 246 # gdb-xxx.tar.Z:
 247 TARDIRS = doc hp-include # tests
 248
 249 # GDB "info" files, which should be included in their entirety
 250 INFOFILES = gdb.info*
 251
 252 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 253
 254 SOURCES=$(SFILES) $(ALLDEPFILES)
 255 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 256 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 257              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 258 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 259
 260 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 261     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 262     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 263     command.o utils.o expread.o expprint.o environ.o version.o \
 264     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 265     inftarg.o ieee-float.o putenv.o \
 266     dbxread.o coffread.o # mipsread.o
 267
 268 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 269
 270 TSOBS = core.o inflow.o
 271
 272 NTSOBS = standalone.o
 273
 274 TSSTART = /lib/crt0.o
 275
 276 NTSSTART = kdb-start.o
 277
 278 # Prevent Sun make from putting in the machine type.  Setting
 279 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 280 .c.o:
 281         ${CC} -c ${CFLAGS} $<
 282
 283 all: gdb
 284
 285 install: gdb
 286         cp gdb $(bindir)/gdb.new
 287         mv $(bindir)/gdb.new $(bindir)/gdb
 288         $(M_INSTALL)
 289
 290 init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
 291         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 292
 293 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
 294         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 295           $(CLIBS)
 296
 297 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 298         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 299         #load ./init.c $(SFILES)
 300         #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
 301         #unload ${srcdir}/nindy-share/[A-Z]*
 302         #load ${srcdir}/expread.tab.c
 303         #load copying.c version.c
 304         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 305         #load ${LIBIBERTY_DIR}/*.c
 306         #load ${BFD_DIR}/*.c
 307         #load ${READLINE_DIR}/*.c
 308         #load -ltermcap
 309         ##void mcheck(a) void (*a)(); { }
 310         ##void mtrace() { }
 311
 312
 313
 314 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 315 # on itself without copying the executable.  So "make gdb1" will make
 316 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 317 # Removing gdb1 before the copy is the right thing if gdb1 is open
 318 # in another process.
 319 gdb1: gdb
 320         rm -f gdb1
 321         cp gdb gdb1
 322
 323 # This is a remote stub which runs under unix and starts up an
 324 # inferior process.  This is at least useful for debugging GDB's
 325 # remote support.
 326 rapp: $(RAPP_OBS)
 327         rm -f rapp_init.c
 328         ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
 329         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 330
 331 # Support for building Makefile out of configured pieces, automatically
 332 # generated dependencies, etc.  alldeps.mak is a file that contains
 333 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
 334 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
 335 # contents of the xconfig and tconfig subdirectories.
 336
 337 alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
 338         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 339         for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
 340             ${srcdir}/xconfig/*[0-9A-Za-z] | \
 341             grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
 342           echo $$i >>allconfig.tmp; \
 343           awk <$$i ' \
 344             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 345               for (i = 2; i <= NF; i++) \
 346                 print $$i >> "alldeps.tmp" ; \
 347             } \
 348             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 349               print $$2 >> "allparam.tmp" }' ; \
 350         done
 351         sort <alldeps.tmp | uniq | \
 352           sed -e 's/arm-convert.o/arm-convert.s/' \
 353               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 354               -e 's!^nindy.o!nindy-share/nindy.c!' \
 355               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 356               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 357               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 358               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 359               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 360               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 361               -e 's/\.o/.c/' \
 362             >alldeps2.tmp
 363         echo '# Start of "alldeps.mak" definitions' \
 364             >>alldeps.mak;
 365         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 366             >>alldeps.mak;
 367         grep -v / alldeps2.tmp | \
 368           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 369             NR == 0 {printf $$0;} \
 370             NR != 0 {printf "\\\n" $$0} \
 371             END {printf "\n\n"}' >>alldeps.mak;
 372         grep / alldeps2.tmp | \
 373           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 374             NR == 0 {printf $$0;} \
 375             NR != 0 {printf "\\\n" $$0} \
 376             END {printf "\n\n"}' >>alldeps.mak;
 377         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 378             NR == 0 {printf $$0;} \
 379             NR != 0 {printf "\\\n" $$0} \
 380             END {printf "\n\n"}' >>alldeps.mak;
 381         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 382             NR == 0 {printf $$0;} \
 383             NR != 0 {printf "\\\n" $$0} \
 384             END {printf "\n\n"}' >>alldeps.mak;
 385         echo '# End of "alldeps.mak" definitions' \
 386             >>alldeps.mak;
 387         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 388
 389 # The sed script makes everything which depends on {x,t}m.h depend on
 390 # config.status as well, in case someone reconfigures gdb out from
 391 # under an already compiled gdb.
 392 depend: $(SOURCES) Makefile.in
 393         @echo Ignore errors about non-existent system-supplied include files
 394         @echo for systems other than the one you are using.
 395         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 396         @echo can safely be ignored.
 397         @echo Also ignore parse errors in valops.c, and any errors in
 398         @echo arm-convert.s.
 399         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 400           `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
 401 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
 402 # for xm.h and tm.h.  This allows the same "depend" file to be used
 403 # by the various subdirectories.
 404         if [ "${srcdir}" = "." ] ; then \
 405           <depend.tmp sed \
 406             -e 's; ./xm.h; xm.h;g'  \
 407             -e 's; ./tm.h; tm.h;g'  \
 408             -e 's; \./; $${srcdir}/;g'  \
 409             -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 410             -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 411             >depend.tm2; \
 412           rm depend.tmp; \
 413           mv depend.tm2 depend.tmp; \
 414         fi
 415         <depend.tmp sed \
 416           -e 's; [xt]m.h;& config.status;g'  \
 417           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 418           -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
 419           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 420           -e 's; ./xm.h; xm.h config.status;g'  \
 421           -e 's; ./tm.h; tm.h config.status;g'  \
 422           >depend
 423         rm depend.tmp
 424
 425 config.status:
 426         @echo "You must configure gdb.  Look at the README file for details."
 427         @false
 428
 429 # These are not generated by "make depend" because they only are there
 430 # for some machines.
 431 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 432 # dependency to do the right thing.
 433 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
 434 tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
 435 xm-news1000.h : xm-news.h
 436 xm-i386-sv32.h : xm-i386.h
 437 tm-i386gas.h: tm-i386.h
 438 xm-sun4os4.h : xm-sparc.h
 439 tm-sun4os4.h : tm-sparc.h
 440
 441 kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
 442         rm -f init.c
 443         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 444         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 445         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 446           -lc $(CLIBS)
 447
 448 # Put the proper machine-specific files first.
 449 # createtags will edit the .o in DEPFILES into .c
 450 TAGS: ${TAGFILES}
 451         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 452 tags: TAGS
 453
 454 gdb.tar.Z: force_update
 455         ./configure none
 456         rm -f alldeps.mak
 457         $(MAKE) $(MFLAGS) alldeps.mak
 458         ./configure none
 459         rm -f depend
 460         $(MAKE) $(MFLAGS) depend
 461         ./configure none
 462         $(MAKE) $(MFLAGS) gdb.info
 463         $(MAKE) $(MFLAGS) gdb-$(VERSION).tar.Z
 464
 465 gdb-$(VERSION).tar.Z: ${TARFILES} ${TARDIRS} gdb.info
 466         rm -f gdb.tar gdb-$(VERSION).tar.Z; rm -rf $(DIST)
 467         mkdir $(DIST)
 468         cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 469         cd $(DIST) ; ln -s ../${INFOFILES} .
 470         cd $(DIST); for i in ${TARDIRS}; do \
 471           (mkdir $$i; cd $$i; \
 472           ln -s ../../$$i/* .; \
 473           rm -rf SCCS CVS.adm RCS); done
 474         mkdir $(DIST)/xconfig ${DIST}/tconfig
 475         cd $(DIST)/tconfig ; \
 476           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 477         mkdir $(DIST)/vx-share $(DIST)/nindy-share
 478         cd $(DIST)/tconfig ; \
 479           for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 480             do ln -s ../../$$i ../$$i ; done
 481         chmod og=u `find . -print`
 482         tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
 483         rm -rf $(DIST)
 484
 485 clean:
 486         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 487         rm -f init.c init.o version.c
 488         rm -f gdb core gdb.tar gdb.tar.Z make.log
 489         rm -f gdb[0-9]
 490         rm -f gdb.dvi rdl-apps.texinfo gdb-all*
 491         rm -f gdbrc.ps gdbrc.dvi doc/rcfonts.tex doc/gdbrc.log
 492
 493 distclean: clean expread.tab.c TAGS
 494         rm -f tm.h xm.h config.status
 495         rm -f y.output yacc.acts yacc.tmp
 496         rm -f ${TESTS} Makefile depend
 497
 498 realclean: clean
 499         rm -f expread.tab.c TAGS
 500         rm -f tm.h xm.h config.status
 501         rm -f Makefile depend
 502
 503 # Documentation!
 504 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
 505 gdbrc.dvi : doc/gdbrc.tex
 506         ( cd $(srcdir)/doc; \
 507         rm -f rcfonts.tex; cp rc-cm.tex rcfonts.tex; \
 508         TEXINPUTS=.:$$TEXINPUTS tex gdbrc.tex; rm -f gdbrc.log )
 509         mv $(srcdir)/doc/gdbrc.dvi .
 510
 511 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
 512 gdbrc.ps : doc/gdbrc.tex
 513         ( cd $(srcdir)/doc; \
 514         rm -f rcfonts.tex; cp rc-ps.tex rcfonts.tex; \
 515         TEXINPUTS=.:$$TEXINPUTS tex gdbrc.tex; \
 516         dvips -t landscape gdbrc -o; rm -f gdbrc.dvi gdbrc.log )
 517         mv $(srcdir)/doc/gdbrc.ps .
 518
 519 # Cover file for "Readline" appendices
 520 rdl-apps.texinfo: ${READLINE_DIR}/inc-readline.texinfo \
 521                         ${READLINE_DIR}/inc-history.texinfo
 522         echo "@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texinfo
 523         echo "@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texinfo
 524
 525 # GDB MANUAL: texinfo source, created by preprocessing w/m4
 526 # Be sure to not create a bad gdb-all.texinfo if ${M4} is missing or aborts...
 527 gdb-all.texinfo: ${SFILES_DOCDIR}
 528         rm -f gdb-all.texinfo foobus.texinfo
 529         ( cd $(srcdir)/doc; \
 530                 ${M4} pretex.m4 none.m4 all.m4 gdb.texinfo ) >foobus.texinfo
 531         mv foobus.texinfo gdb-all.texinfo
 532
 533 # GDB MANUAL: TeX dvi file
 534 gdb.dvi : gdb-all.texinfo rdl-apps.texinfo
 535         TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
 536         texindex gdb-all.??
 537         TEXINPUTS=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
 538         mv gdb-all.dvi gdb.dvi
 539         rm -f gdb-all.?? gdb-all.???
 540
 541 # GDB MANUAL: info file
 542 # We're using texinfo2, and older makeinfo's may not be able to
 543 # cope with all the markup.  In the meantime, we distribute the info
 544 # files as formatted by the elisp texinfo2 code.
 545 gdb.info: gdb-all.texinfo
 546         ${MAKEINFO} gdb-all.texinfo
 547
 548 # Make copying.c from COPYING
 549 copying.c : COPYING copying.awk
 550         awk -f copying.awk < COPYING > copying.c
 551
 552 version.c : Makefile.in
 553         echo 'char *version = "$(VERSION)";' >version.c
 554
 555 # expread.tab.c is generated in srcdir from expread.y, then compiled in target
 556 # directory to expread.o.
 557 ${srcdir}/expread.tab.c : $(srcdir)/expread.y
 558         @echo 'Expect 4 shift/reduce conflicts.'
 559         ${YACC} $(srcdir)/expread.y
 560         mv y.tab.c ${srcdir}/expread.tab.c
 561
 562 expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
 563             frame.h expression.h value.h command.h
 564         $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
 565         mv expread.tab.o expread.o
 566
 567 # dbxread, coffread, mipsread have dependencies on BFD header files.
 568 dbxread.o: ${srcdir}/dbxread.c
 569         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 570
 571 coffread.o: ${srcdir}/coffread.c
 572         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 573
 574 mipsread.o: ${srcdir}/mipsread.c
 575         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 576
 577 # Drag in the files that are in another directory.
 578
 579 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 580         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 581
 582 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 583         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 584
 585 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 586         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 587
 588 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 589         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 590
 591 nindy.o: ${srcdir}/nindy-share/nindy.c
 592         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 593
 594 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 595         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 596
 597 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 598         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 599
 600 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 601         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 602
 603 tdesc-lib/libdc.o : force_update
 604         cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
 605
 606 lint: $(LINTFILES)
 607         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
 608
 609 gdb.cxref: $(SFILES)
 610         cxref -I. $(SFILES) >gdb.cxref
 611
 612 force_update :
 613
 614 # When used with GDB, the demangler should never look for leading
 615 # underscores because GDB strips them off during symbol read-in.  Thus
 616 # -Dnounderscore.
 617
 618 cplus-dem.o : cplus-dem.c
 619         ${CC} -c ${CFLAGS} -Dnounderscore \
 620           `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
 621
 622 # This is the end of "Makefile.in".  When built into "Makefile"
 623 # by the configure script, two things are added below this point:
 624 #       alldeps.mak -- defintions of all files that are used in
 625 #                       host- or target-dependent configurations
 626 #       depend -- what .o files depend on what .c and .h files,
 627 #                       for all configurations.
 628
 629