1 #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
25 tooldir
= $(libdir)/$(target_alias
)
27 datadir = $(prefix)/lib
28 mandir = $(prefix)/man
29 man1dir = $(mandir)/man1
30 man2dir = $(mandir)/man2
31 man3dir = $(mandir)/man3
32 man4dir = $(mandir)/man4
33 man5dir = $(mandir)/man5
34 man6dir = $(mandir)/man6
35 man7dir = $(mandir)/man7
36 man8dir = $(mandir)/man8
37 man9dir = $(mandir)/man9
38 infodir = $(prefix)/info
39 includedir = $(prefix)/include
40 docdir
= $(datadir)/doc
45 INSTALL_PROGRAM
= $(INSTALL
)
46 INSTALL_DATA
= $(INSTALL
)
52 # Flags that describe where you can find the termcap library.
53 # This can be overridden in the host Makefile fragment file.
56 # System V: If you compile gdb with a compiler which uses the coff
57 # encapsulation feature (this is a function of the compiler used, NOT
58 # of the m-?.h file selected by config.gdb), you must make sure that
59 # the GNU nm is the one that is used by munch.
61 # If you are compiling with GCC, make sure that either 1) You use the
62 # -traditional flag, or 2) You have the fixed include files where GCC
63 # can reach them. Otherwise the ioctl calls in inflow.c
64 # will be incorrectly compiled. The "fixincludes" script in the gcc
65 # distribution will fix your include files up.
70 # Directory containing source files. Don't clean up the spacing,
71 # this exact string is matched for by the "configure" script.
74 # It is also possible that you will need to add -I/usr/include/sys to the
75 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
76 # is where it should be according to Posix).
78 # If you use bison instead of yacc, it needs to include the "-y" argument.
83 # where to find texinfo; GDB dist should include a recent one
84 TEXIDIR
=${srcdir}/..
/texinfo
86 # where to find makeinfo, preferably one designed for texinfo-2
89 # Set this up with gcc if you have gnu ld and the loader will print out
90 # line numbers for undefinded refs.
94 # Where is the "include" directory? Traditionally ../include or ./include
95 INCLUDE_DIR
= ${srcdir}/..
/include
96 INCLUDE_DEP
= $$(INCLUDE_DIR
)
98 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
99 # or ./mmalloc (When we want the binary library built from it, we use
100 # ${MMALLOC_DIR}${subdir}.)
101 # Note that mmalloc can still be used on systems without mmap().
102 # To use your system malloc, comment out the following defines.
103 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
104 MMALLOC_DEP
= $$(MMALLOC_DIR
)
105 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
106 # To use your system malloc, uncomment MMALLOC_DISABLE.
107 #MMALLOC_DISABLE = -DNO_MMALLOC
108 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
109 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
110 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
112 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
113 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
114 BFD_DIR
= ${srcdir}/..
/bfd
115 BFD_DEP
= $$(BFD_DIR
)
116 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
118 # Where is the source dir for the READLINE library? Traditionally in .. or .
119 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
120 READLINE_DIR
= ${srcdir}/..
/readline
121 READLINE_DEP
= $$(READLINE_DIR
)
122 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
124 # All the includes used for CFLAGS and for lint.
125 # -I. for config files.
126 # -I${srcdir} possibly for regex.h also.
127 # -I${srcdir}/config for more generic config files.
128 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
${srcdir}/config
-I
$(INCLUDE_DIR
)
130 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
131 # from the config/ directory.
132 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
133 #PROFILE_CFLAGS = -pg
135 # CFLAGS is specifically reserved for setting from the command line
136 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
138 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
139 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
140 # None of the things in CFLAGS will do any harm, and on some systems
141 # (e.g. SunOS4) it is important to use the MH_CFLAGS.
144 # Where is the "-liberty" library, containing getopt and obstack?
145 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
146 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
148 # Where is the "-lopcodes" library, with (some of) the opcode tables and
150 OPCODES
= .
/..
/opcodes
${subdir}/libopcodes.a
152 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
153 # If your sysyem is missing alloca(), or, more likely, it's there but
154 # it doesn't work, define ALLOCA & ALLOCA1 too.
156 # Libraries and corresponding dependencies for compiling gdb.
157 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
158 # TERMCAP comes after readline, since readline depends on it.
159 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
160 ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
161 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
162 ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
164 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
165 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
171 LINTFLAGS
= -I
${BFD_DIR}
176 # Host and target-dependent makefile fragments come in here.
178 # End of host and target-dependent makefile fragments
182 "exec_prefix=$(exec_prefix)" \
183 "against=$(against)" \
185 "AR_FLAGS=$(AR_FLAGS)" \
188 $(start-sanitize-chill
)\
189 "CHILLFLAGS=$(CHILLFLAGS)" \
191 "CHILL_LIB=$(CHILL_LIB)" \
192 $(end-sanitize-chill
)\
194 "CXXFLAGS=$(CXXFLAGS)" \
196 "MAKEINFO=$(MAKEINFO)" \
197 "INSTALL=$(INSTALL)" \
198 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
199 "INSTALL_DATA=$(INSTALL_DATA)" \
200 "RUNTEST=$(RUNTEST)" \
201 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
204 # Flags that we pass when building the testsuite.
207 if [ -f $${rootme}/../gcc/Makefile ] ; then \
208 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
210 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
213 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
220 if [ -f $${rootme}/../gcc/Makefile ] ; then \
221 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
223 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
226 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
230 $(start-sanitize-chill
)
231 CHILLFLAGS
= $(CFLAGS
)
233 CHILL_FOR_TARGET
= ` \
234 if [ -f $${rootme}/../gcc/Makefile ] ; then \
235 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
237 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
240 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
245 ## This is ugly, but I don't want GNU make to put these variables in
246 ## the environment. Older makes will see this as a set of targets
247 ## with no dependencies and no actions.
248 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET
:
250 $(end-sanitize-chill
)
252 # The use of $$(x_FOR_TARGET) reduces the command line length by not
253 # duplicating the lengthy definition.
254 TARGET_FLAGS_TO_PASS
= \
256 "exec_prefix=$(exec_prefix)" \
257 "against=$(against)" \
258 'CC=$$(CC_FOR_TARGET)' \
259 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
261 $(start-sanitize-chill
)\
262 "CHILLFLAGS=$(CHILLFLAGS)" \
263 'CHILL=$$(CHILL_FOR_TARGET)' \
264 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
265 "CHILL_LIB=$(CHILL_LIB)" \
266 $(end-sanitize-chill
)\
267 'CXX=$$(CXX_FOR_TARGET)' \
268 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
269 "CXXFLAGS=$(CXXFLAGS)" \
270 "MAKEINFO=$(MAKEINFO)" \
271 "INSTALL=$(INSTALL)" \
272 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
273 "INSTALL_DATA=$(INSTALL_DATA)" \
274 "RUNTEST=$(RUNTEST)" \
275 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
278 # Source files in the main directory.
279 # Files which are included via a config/* Makefile fragment
280 # should *not* be specified here; they're in "ALLDEPFILES".
282 blockframe.c breakpoint.c command.c core.c demangle.c \
283 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
284 main.c printcmd.c gdbtypes.c \
285 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
286 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
287 mem-break.c target.c \
288 dbxread.c coffread.c elfread.c dwarfread.c stabsread.c \
289 language.c parse.c buildsym.c objfiles.c \
290 minsyms.c mipsread.c maint.c ch-exp.y c-lang.c ch-lang.c m2-lang.c \
291 complaints.c typeprint.c c-typeprint.c ch-typeprint.c m2-typeprint.c \
292 c-valprint.c cp-valprint.c ch-valprint.c m2-valprint.c
294 # Source files in subdirectories (which will be handled separately by
296 # Files which are included via a config/* Makefile fragment
297 # should *not* be specified here; they're in "ALLDEPFILES".
299 ${srcdir}/vx-share
/dbgRpcLib.h \
300 ${srcdir}/vx-share
/ptrace.h \
301 ${srcdir}/vx-share
/vxTypes.h \
302 ${srcdir}/vx-share
/vxWorks.h \
303 ${srcdir}/vx-share
/wait.h \
304 ${srcdir}/vx-share
/xdr_ld.h \
305 ${srcdir}/vx-share
/xdr_ptrace.h \
306 ${srcdir}/vx-share
/xdr_rdb.h \
307 ${srcdir}/nindy-share
/b.out.h \
308 ${srcdir}/nindy-share
/block_io.h \
309 ${srcdir}/nindy-share
/coff.h \
310 ${srcdir}/nindy-share
/demux.h \
311 ${srcdir}/nindy-share
/env.h \
312 ${srcdir}/nindy-share
/stop.h \
313 ${srcdir}/nindy-share
/ttycntl.h \
314 ${srcdir}/29k-share
/udi_soc
316 # Source files in sub-subdirectories. We need to know this because we
317 # make relative symlinks with them.
319 ${srcdir}/29k-share
/udi
/udiphcfg.h \
320 ${srcdir}/29k-share
/udi
/udiphsun.h \
321 ${srcdir}/29k-share
/udi
/udiproc.h \
322 ${srcdir}/29k-share
/udi
/udipt29k.h \
323 ${srcdir}/29k-share
/udi
/udiptcfg.h \
324 ${srcdir}/29k-share
/udi
/udisoc.h
326 # Non-source files in subdirs, that should go into gdb.tar.Z.
328 ${srcdir}/nindy-share
/Makefile \
329 ${srcdir}/nindy-share
/VERSION \
330 ${srcdir}/nindy-share
/README \
331 ${srcdir}/vx-share
/README
333 # All source files that go into linking GDB, except config-specified files.
334 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
) $(SFILES_SUBSUBDIR
)
336 # All source files that lint should look at
337 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
339 # Any additional files specified on these lines should also be added to
340 # the OTHERS = definition below, so they go in the tar files.
341 SFILES_STAND
= $(SFILES
) standalone.c
342 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
344 # Header files that are not named in config/*/* Makefile fragments go here.
345 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h \
346 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
347 ieee-float.h inferior.h language.h \
348 minimon.h objfiles.h parser-defs.h partial-stab.h \
349 serial.h signals.h solib.h symfile.h symtab.h stabsread.h \
350 target.h terminal.h typeprint.h xcoffsolib.h value.h \
351 tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \
352 xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \
354 c-lang.h ch-lang.h m2-lang.h complaints.h \
358 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
360 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
361 POSSLIBS
= $(POSSLIBS_MAINDIR
)
363 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
365 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
366 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
367 README TODO TAGS NEWS Projects \
368 .gdbinit COPYING
$(YYFILES
) \
369 copying.c Convex.notes copying.awk \
370 saber.suppress standalone.c stuff.c kdb-start.c \
373 # Subdirectories of gdb, which should be included in their entirety in
375 TARDIRS
= doc sparclite
# tests
377 # GDB "info" files, which should be included in their entirety
378 INFOFILES
= gdb.
info*
380 DEPFILES
= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
382 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
383 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
384 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
385 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
386 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
388 OBS
= version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
389 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
390 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
391 command.o utils.o expprint.o environ.o gdbtypes.o \
392 copying.o
$(DEPFILES
) mem-break.o target.o \
393 putenv.o parse.o language.o
$(YYOBJ
) \
394 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
395 dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
396 stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
397 typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
398 c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o
400 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
404 NTSOBS
= standalone.o
406 TSSTART
= /lib
/crt0.o
408 NTSSTART
= kdb-start.o
410 SUBDIRS
= doc testsuite
412 # For now, shortcut the "configure GDB for fewer languages" stuff.
413 YYFILES
= c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
414 YYOBJ
= c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
416 # Prevent Sun make from putting in the machine type. Setting
417 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
419 ${CC} -c
${INTERNAL_CFLAGS} $<
422 $(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
425 rootme
=`pwd`; export rootme
; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) DO
=check DODIRS
=testsuite subdir_do
427 $(MAKE
) $(FLAGS_TO_PASS
) DO
=info "DODIRS=$(SUBDIRS)" subdir_do
429 $(MAKE
) $(FLAGS_TO_PASS
) DO
=install-info
"DODIRS=$(SUBDIRS)" subdir_do
431 $(MAKE
) $(FLAGS_TO_PASS
) DO
=clean-info
"DODIRS=$(SUBDIRS)" subdir_do
434 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
435 pack gdb.t
; rm -f gdb.t
439 -parent
=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
440 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
441 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; fi
442 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
443 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
444 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; fi
445 -n
=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
446 $(INSTALL_PROGRAM
) gdb
$(bindir)/$$n; \
447 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$$n.1
449 $(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
451 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
452 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
454 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
455 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
456 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
458 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
459 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
460 #load ./init.c $(SFILES)
461 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
462 #unload ${srcdir}/vx-share/*.h
463 #unload ${srcdir}/nindy-share/[A-Z]*
464 #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
465 #load copying.c version.c
466 #load ../opcodes/libopcodes.a
467 #load ../libiberty/libiberty.a
468 #load ../bfd/libbfd.a
469 #load ../readline/libreadline.a
470 #load ../mmalloc/libmmalloc.a
472 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
473 echo
"Load .c corresponding to:" $(DEPFILES
)
476 # This is useful when debugging GDB, because some Unix's don't let you run GDB
477 # on itself without copying the executable. So "make gdb1" will make
478 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
479 # Removing gdb1 before the copy is the right thing if gdb1 is open
480 # in another process.
485 # This is a remote stub which runs under unix and starts up an
486 # inferior process. This is at least useful for debugging GDB's
490 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
491 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
493 # Support for building Makefile out of configured pieces, automatically
494 # generated dependencies, etc. alldeps.mak is a file that contains
495 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
496 # ALLDEPFILES_SUBDIR, ALLDEPFILES_SUBSUBDIR, ALLPARAM, and ALLCONFIG,
497 # all cadged from the current contents of the config subdirectory.
499 alldeps.mak
: ${srcdir}/config
500 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
501 for i in
`ls -d ${srcdir}/config/*/*.m[ht]` ; do \
502 echo
$$i >>allconfig.tmp
; \
504 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
505 || $$1 == "NATDEPFILES=" { \
506 for (i = 2; i <= NF; i++) \
507 print $$i >> "alldeps.tmp" ; \
509 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
510 print $$2 >> "allparam.tmp" }' ; \
512 sort <alldeps.tmp | uniq | \
513 sed
-e
's/arm-convert.o/arm-convert.s/' \
514 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
515 -e
's!^nindy.o!nindy-share/nindy.c!' \
516 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
517 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
518 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
519 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
520 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
521 -e
's!udr.o!29k-share/udi/udr.c!' \
522 -e
's!udip2soc.o!29k-share/udi/udip2soc.c!' \
525 for i in
`cat allparam.tmp` ; do \
526 find config
-name
$$i -print >>allparam2.tmp
; \
528 echo
'# Start of "alldeps.mak" definitions' \
530 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR) $$(ALLDEP_FILES_SUBSUBDIR)' \
532 grep
-v
/ alldeps2.tmp | \
533 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
534 NR == 0 {printf $$0;} \
535 NR != 0 {printf "\\\n" $$0} \
536 END {printf "\n\n"}' >>alldeps.mak
;
537 grep
/ alldeps2.tmp | grep
-v
'/.*/' | \
538 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
539 NR == 0 {printf $$0;} \
540 NR != 0 {printf "\\\n" $$0} \
541 END {printf "\n\n"}' >>alldeps.mak
;
542 grep
'/.*/' alldeps2.tmp | \
543 awk
'BEGIN {printf "ALLDEPFILES_SUBSUBDIR="} \
544 NR == 0 {printf $$0;} \
545 NR != 0 {printf "\\\n" $$0} \
546 END {printf "\n\n"}' >>alldeps.mak
;
547 sort <allparam2.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
548 NR == 0 {printf $$0;} \
549 NR != 0 {printf "\\\n" $$0} \
550 END {printf "\n\n"}' >>alldeps.mak
;
551 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
552 NR == 0 {printf $$0;} \
553 NR != 0 {printf "\\\n" $$0} \
554 END {printf "\n\n"}' >>alldeps.mak
;
555 echo
'# End of "alldeps.mak" definitions' \
557 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allparam2.tmp allconfig.tmp
559 # The sed script makes everything which depends on {x,t}m.h depend on
560 # config.status as well, in case someone reconfigures gdb out from
561 # under an already compiled gdb.
562 depend
: $(SOURCES
) Makefile.in
563 @echo Ignore errors about non-existent system-supplied
include files
564 @echo for systems other than the one you are using.
565 @echo Also ignore parse errors in valops.c
, and any errors in
568 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
569 -I
${READLINE_DIR} $(INCLUDE_CFLAGS
) \
570 `ls $(SOURCES) | grep -v '\.[hy]$$' | \
572 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
573 # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
574 # by the various subdirectories.
575 if
[ "${srcdir}" = "." ] ; then \
577 -e
's; ./xm.h; xm.h;g' \
578 -e
's; ./tm.h; tm.h;g' \
579 -e
's; ./nm.h; nm.h;g' \
580 -e
's; \./; $${srcdir}/;g' \
581 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
582 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
583 -e
's; 29k-share/; $${srcdir}/29k-share/;g' \
586 mv depend.tm2 depend.tmp
; \
589 -e
's; [xt]m.h;& config.status;g' \
590 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
591 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
592 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
593 -e
's; ./xm.h; xm.h config.status;g' \
594 -e
's; ./tm.h; tm.h config.status;g' \
595 -e
's; ./nm.h; nm.h config.status;g' \
600 @echo
"You must configure gdb. Look at the README file for details."
603 # This checks the configure.in file versus the config/ directory.
604 config-check
: config-check-hosts config-check-targets
606 grep gdb_host
= ${srcdir}/configure.in | \
607 sed
-e
's/.*gdb_host=//' -e
's/ ;;$$/.mh/' |
sort -u
>HOSTconf.o
608 (cd
${srcdir}/config
; ls
*.mh
) >HOSTdir.o
609 diff
-u HOSTconf.o HOSTdir.o
611 config-check-targets
:
612 grep gdb_target
= ${srcdir}/configure.in | \
613 sed
-e
's/.*gdb_target=//' -e
's/ ;;$$/.mh/' |
sort -u
>TARGconf.o
614 (cd
${srcdir}/config
; ls
*.mt
) >TARGdir.o
615 diff
-u HOSTconf.o HOSTdir.o
617 # These are not generated by "make depend" because they only are there
619 # But these rules don't do what we want; we want to hack the foo.o: tm.h
620 # dependency to do the right thing.
621 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
622 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
623 xm-news1000.h
: xm-news.h
624 xm-i386-sv32.h
: xm-i386.h
625 tm-i386gas.h
: tm-i386.h
626 xm-sun4os4.h
: xm-sparc.h
627 tm-sun4os4.h
: tm-sparc.h
628 xm-vaxult.h
: xm-vax.h
629 xm-vaxbsd.h
: xm-vax.h
631 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
633 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
634 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
635 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
638 # Put the proper machine-specific files first.
639 # createtags will edit the .o in DEPFILES into .c
641 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} ${NAT_FILE} \
642 $(DEPFILES
) ${TAGFILES}
645 # Making distributions of GDB and friends.
647 # Make a directory `proto-gdb.dir' that contains an image of the GDB
648 # directory of the distribution, built up with symlinks.
649 make-proto-gdb.
dir: force_update
650 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
651 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
653 # Make a tar file containing the GDB directory of the distribution.
654 gdb.
tar.Z
: force_update
655 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
656 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
658 # Update the "alldeps.mak" file in a source directory.
659 update-alldeps
: force_update
660 ..
/configure none
-norecursion
662 $(MAKE
) $(MFLAGS
) alldeps.mak
664 # Update the "depend" and "alldeps.mak" files in a source directory.
665 # We update alldeps.mak first, since it is used to generate the list
666 # of files to be checked for dependencies.
667 update-depend
: update-alldeps force_update
668 ..
/configure none
-norecursion
670 $(MAKE
) $(MFLAGS
) depend
672 # Set up the GDB source directory for distribution, by building all files that
673 # are products of other files.
674 setup-to-dist
: update-depend force_update
676 (cd doc
; $(MAKE
) $(MFLAGS
) GDBvn.texi
)
677 $(MAKE
) $(MFLAGS
) gdb.
info
678 $(MAKE
) $(MFLAGS
) refcard.ps
680 # Build a tar file from a proto-gdb.dir.
681 gdb-
$(VERSION
).
tar.Z
: force_update
682 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
683 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
684 ln
-s proto-gdb.
dir $(DIST
)
685 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
686 rm -rf
$(DIST
) proto-gdb.
dir
688 # Build a proto-gdb.dir after GDB has been set up for distribution.
689 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
690 # built in the setup-to-dist process, since it defines things like ALLCONFIG
691 # and ALLDEPFILES, that we need.
692 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
695 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
696 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
697 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
698 (mkdir
$$i; cd
$$i; \
699 ln
-s ..
/..
/$$i/* .
; \
700 rm -rf SCCS CVS.adm RCS config.status
; \
701 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
;); done
702 mkdir proto-gdb.
dir/config
703 cd proto-gdb.
dir/config
; \
704 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
705 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
706 mkdir proto-gdb.
dir/29k-share proto-gdb.
dir/29k-share
/udi
707 cd proto-gdb.
dir/config
; \
708 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
709 do ln
-s ..
/..
/$$i ..
/$$i ; done
710 cd proto-gdb.
dir/config
; \
711 for i in
$(SFILES_SUBSUBDIR
) $(ALLDEPFILES_SUBSUBDIR
); \
712 do ln
-s ..
/..
/..
/$$i ..
/$$i ; done
713 chmod og
=u
`find . -print`
716 rm -f
*.o
${ADD_FILES} *~
717 rm -f init.c version.c
718 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
720 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(SUBDIRS)" subdir_do
722 distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
723 rm -f tm.h xm.h config.status
724 rm -f y.output
yacc.acts
yacc.tmp
725 rm -f
${TESTS} Makefile depend
726 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(SUBDIRS)" subdir_do
729 rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
730 rm -f tm.h xm.h config.status
731 rm -f Makefile depend
732 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=realclean "DODIRS=$(SUBDIRS)" subdir_do
734 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
737 @for i in
$(DODIRS
); do \
738 if
[ -d .
/$$i ] ; then \
740 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
745 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
746 $(SHELL
) .
/config.status
751 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
753 ( cd .
/doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
) )
754 mv .
/doc
/refcard.
dvi .
756 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
758 ( cd .
/doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
) )
759 mv .
/doc
/refcard.ps .
761 # GDB MANUAL: TeX dvi file
763 ( cd .
/doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
) )
766 # GDB MANUAL: info file
768 ( cd .
/doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
) )
771 # Make copying.c from COPYING
772 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
773 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
776 echo
'char *version = "$(VERSION)";' >version.c
778 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
779 # in srcdir, then compiled in target dir to c-exp.tab.o.
780 # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
781 # (some "makes" rewrite the VPATH into command arguments if they match deps).
782 # Remove bogus decls for malloc/realloc/free which conflict with everything
784 c-exp.tab.o
: c-exp.tab.c
785 c-exp.tab.c
: $(srcdir)/c-exp.y
$(srcdir)/Makefile.in
786 @echo
'Expect 4 shift/reduce conflicts.'
787 ${YACC} $(srcdir)/c-exp.y
788 -sed
-e
'/extern.*malloc/d' \
789 -e
'/extern.*realloc/d' \
790 -e
'/extern.*free/d' \
791 -e
'/include.*malloc.h/d' \
792 -e
's/malloc/xmalloc/g' \
793 -e
's/realloc/xrealloc/g' \
794 < y.tab.c
> .
/.
/c-exp.tab.c
797 # start-sanitize-chill
798 # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
799 # in srcdir, then compiled in target dir to ch-exp.tab.o.
800 # Remove bogus decls for malloc/realloc/free which conflict with everything
802 ch-exp.tab.o
: ch-exp.tab.c
803 ch-exp.tab.c
: $(srcdir)/ch-exp.y
$(srcdir)/Makefile.in
804 @echo
'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
805 ${YACC} $(srcdir)/ch-exp.y
806 -sed
-e
'/extern.*malloc/d' \
807 -e
'/extern.*realloc/d' \
808 -e
'/extern.*free/d' \
809 -e
'/include.*malloc.h/d' \
810 -e
's/malloc/xmalloc/g' \
811 -e
's/realloc/xrealloc/g' \
812 < y.tab.c
> .
/.
/ch-exp.tab.c
816 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
817 # in srcdir, then compiled in target dir to m2-exp.tab.o.
818 # Remove bogus decls for malloc/realloc/free which conflict with everything
820 m2-exp.tab.o
: m2-exp.tab.c
821 m2-exp.tab.c
: $(srcdir)/m2-exp.y
$(srcdir)/Makefile.in
822 ${YACC} $(srcdir)/m2-exp.y
823 -sed
-e
'/extern.*malloc/d' \
824 -e
'/extern.*realloc/d' \
825 -e
'/extern.*free/d' \
826 -e
'/include.*malloc.h/d' \
827 -e
's/malloc/xmalloc/g' \
828 -e
's/realloc/xrealloc/g' \
829 < y.tab.c
> .
/.
/m2-exp.tab.c
833 main.o
: ${srcdir}/main.c
834 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
836 # The symbol-file readers have dependencies on BFD header files.
837 dbxread.o
: ${srcdir}/dbxread.c
838 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
840 coffread.o
: ${srcdir}/coffread.c
841 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
843 mipsread.o
: ${srcdir}/mipsread.c
844 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
846 elfread.o
: ${srcdir}/elfread.c
847 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
849 dwarfread.o
: ${srcdir}/dwarfread.c
850 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
852 stabsread.o
: ${srcdir}/stabsread.c
853 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
855 # Used on RS/6000 native
856 xcoffread.o
: ${srcdir}/xcoffread.c
857 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
859 xcoffexec.o
: ${srcdir}/xcoffexec.c
860 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
862 # Used on HP-PA native
863 paread.o
: ${srcdir}/paread.c
864 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/paread.c
866 # Drag in the files that are in another directory.
868 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
869 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
871 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
872 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
874 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
875 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
877 nindy.o
: ${srcdir}/nindy-share
/nindy.c
878 ${CC} -c
${INTERNAL_CFLAGS} -DSTRIP
='"$(tooldir)/bin/strip"' \
879 ${srcdir}/nindy-share
/nindy.c
881 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
882 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
884 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
885 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
887 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
888 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
890 udr.o
: ${srcdir}/29k-share
/udi
/udr.c
891 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udr.c
893 udip2soc.o
: ${srcdir}/29k-share
/udi
/udip2soc.c
894 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udip2soc.c
897 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
898 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
901 cxref -I. $(SFILES) >gdb.cxref
905 # GNU Make has an annoying habit of putting *all* the Makefile variables
906 # into the environment, unless you include this target as a circumvention.
907 # Rumor is that this will be fixed (and this target can be removed)
911 # GNU Make 3.63 has a different problem: it keeps tacking command line
912 # overrides onto the definition of $(MAKE). This variable setting
916 # This is the end of "Makefile.in". When built into "Makefile"
917 # by the configure script, two things are added below this point:
918 # alldeps.mak -- defintions of all files that are used in
919 # host- or target-dependent configurations
920 # depend -- what .o files depend on what .c and .h files,
921 # for all configurations.