1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # GDB is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 1, or (at your option)
10 # GDB is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with GDB; see the file COPYING. If not, write to
17 # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
19 # Destination directory of the software tree build
22 # Place to install binaries in the destination tree.
25 # System V: If you compile gdb with a compiler which uses the coff
26 # encapsulation feature (this is a function of the compiler used, NOT
27 # of the m-?.h file selected by config.gdb), you must make sure that
28 # the GNU nm is the one that is used by munch.
30 # If you are compiling with GCC, make sure that either 1) You use the
31 # -traditional flag, or 2) You have the fixed include files where GCC
32 # can reach them. Otherwise the ioctl calls in inflow.c
33 # will be incorrectly compiled. The "fixincludes" script in the gcc
34 # distribution will fix your include files up.
41 # It is also possible that you will need to add -I/usr/include/sys to the
42 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
43 # is where it should be according to Posix).
50 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
51 # Berkeley/Sun don't have quite enough.
54 # where to find texinfo; if you have PostScript fonts you may want to try
55 # the Cygnus mods (which also have different header/footer layout)
56 #TEXIDIR=${srcdir}/../texinfo/cygnus
57 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
59 # Set this up with gcc if you have gnu ld and the loader will print out
60 # line numbers for undefinded refs.
64 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
65 # (useful for debugging memory allocation problems in gdb). To use your
66 # system malloc, uncomment the following two lines.
68 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
69 GNU_MALLOC
= gmalloc.o mcheck.o mtrace.o
72 # Where is the "include" directory? Traditionally ../include or ./include
73 INCLUDE_DIR
= ${srcdir}/..
/include
74 INCLUDE_DEP
= $$(INCLUDE_DIR
)
76 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
77 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
78 BFD_DIR
= ${srcdir}/..
/bfd
80 BFD_LIB
= $(BFD_DIR
)${subdir}/libbfd.a
82 # Where is the source dir for the READLINE library? Traditionally in .. or .
83 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
84 READLINE_DIR
= ${srcdir}/..
/readline
85 READLINE_DEP
= $$(READLINE_DIR
)
86 RL_LIB
= $(READLINE_DIR
)${subdir}/libreadline.a
88 # All the includes used for CFLAGS and for lint.
89 # -I. for config files.
90 # -I${srcdir} possibly for regex.h also.
91 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
) -I
${srcdir}/vx-share
93 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
95 GLOBAL_CFLAGS
= -g
${TM_CFLAGS} ${XM_CFLAGS}
98 CFLAGS
= ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
99 # None of the things in CFLAGS will do any harm, and on some systems
100 # (e.g. SunOS4) it is important to use the M_CFLAGS.
103 # Where is the "-liberty" library, containing getopt and obstack?
104 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
105 LIBIBERTY
= ${LIBIBERTY_DIR}${subdir}/libiberty.a
107 # Flags that describe where you can find the termcap library.
108 # You may need to make other arrangements for USG.
111 # The xconfig file must define REGEX and REGEX1 on USG machines.
112 # If your sysyem is missing alloca(), or, more likely, it's there but
113 # it doesn't work, define ALLOCA & ALLOCA1 too.
114 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
116 # Libraries and corresponding dependencies for compiling gdb.
117 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
118 # TERMCAP comes last, since readline depends on it.
119 CLIBS
= $(XM_CLIBS
) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
120 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
122 ADD_FILES
= ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
123 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
131 # Source files in the main directory.
132 # Files which are included via a tconfig/* or xconfig/* file
133 # should *not* be specified here; they're in "ALLDEPFILES".
135 blockframe.c breakpoint.c command.c core.c \
136 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
138 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
139 utils.c valarith.c valops.c valprint.c values.c expread.y \
140 signame.c cplus-dem.c mem-break.c target.c inftarg.c \
141 dbxread.c coffread.c \
144 # Source files in subdirectories (which will be handled separately by
146 # Files which are included via a tconfig/* or xconfig/* file
147 # should *not* be specified here; they're in "ALLDEPFILES".
149 ${srcdir}/vx-share
/dbgRpcLib.h \
150 ${srcdir}/vx-share
/ptrace.h \
151 ${srcdir}/vx-share
/reg.h \
152 ${srcdir}/vx-share
/vxTypes.h \
153 ${srcdir}/vx-share
/vxWorks.h \
154 ${srcdir}/vx-share
/wait.h \
155 ${srcdir}/vx-share
/xdr_ld.h \
156 ${srcdir}/vx-share
/xdr_ptrace.h \
157 ${srcdir}/vx-share
/xdr_rdb.h \
158 ${srcdir}/vx-share
/xdr_regs.h \
159 ${srcdir}/nindy-share
/Makefile \
160 ${srcdir}/nindy-share
/VERSION \
161 ${srcdir}/nindy-share
/b.out.h \
162 ${srcdir}/nindy-share
/block_io.h \
163 ${srcdir}/nindy-share
/coff.h \
164 ${srcdir}/nindy-share
/demux.h \
165 ${srcdir}/nindy-share
/env.h \
166 ${srcdir}/nindy-share
/stop.h \
167 ${srcdir}/nindy-share
/ttycntl.h
169 # All source files that go into linking GDB, except config-specified files.
170 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
172 # All source files that lint should look at
173 LINTFILES
= $(SFILES
) expread.tab.c init.c
175 # Documentation source files
177 ${srcdir}/doc
/gdb.texinfo \
178 ${srcdir}/doc
/pretex.m4 \
179 ${srcdir}/doc
/none.m4 \
180 ${srcdir}/doc
/all.m4 \
181 ${srcdir}/doc
/gdb.alter-m4 \
182 ${srcdir}/doc
/gdb.bugs-m4 \
183 ${srcdir}/doc
/gdb.canned-m4 \
184 ${srcdir}/doc
/gdb.cmds-m4 \
185 ${srcdir}/doc
/gdb.ctl-m4 \
186 ${srcdir}/doc
/gdb.data-m4 \
187 ${srcdir}/doc
/gdb.emacs-m4 \
188 ${srcdir}/doc
/gdb.files-m4 \
189 ${srcdir}/doc
/gdb.gpl-m4 \
190 ${srcdir}/doc
/gdb.install-m4 \
191 ${srcdir}/doc
/gdb.inv.m-m4 \
192 ${srcdir}/doc
/gdb.inv.s-m4 \
193 ${srcdir}/doc
/gdb.invoc-m4 \
194 ${srcdir}/doc
/gdb.rdln-m4 \
195 ${srcdir}/doc
/gdb.rename-m4 \
196 ${srcdir}/doc
/gdb.run-m4 \
197 ${srcdir}/doc
/gdb.sample-m4 \
198 ${srcdir}/doc
/gdb.src-m4 \
199 ${srcdir}/doc
/gdb.stack-m4 \
200 ${srcdir}/doc
/gdb.stop-m4 \
201 ${srcdir}/doc
/gdb.symb-m4 \
202 ${srcdir}/doc
/gdb.tgts-m4 \
203 ${srcdir}/doc
/gdb.top-m4
205 # Any additional files specified on these lines should also be added to
206 # the OTHERS = definition below, so they go in the tar files.
207 SFILES_STAND
= $(SFILES
) standalone.c
208 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
210 # Header files that are not named in tconfig/* or xconfig/* go here.
211 HFILES
= breakpoint.h command.h defs.h environ.h \
212 expression.h frame.h gdbcmd.h gdbcore.h \
213 getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
214 signals.h signame.h symfile.h symtab.h \
215 target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
218 # Header files for machine opcode tables.
219 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
220 # business, since they will be included in the separate includes tar file
221 # rather than in the gdb tar file.
223 OPCODES
= $(OPCODE_DIR
)pn-opcode.h
$(OPCODE_DIR
)np1-opcode.h \
224 $(OPCODE_DIR
)sparc-opcode.h
$(OPCODE_DIR
)vax-opcode.h \
225 $(OPCODE_DIR
)m68k-opcode.h
$(OPCODE_DIR
)ns32k-opcode.h \
226 $(OPCODE_DIR
)convx-opcode.h
$(OPCODE_DIR
)pyr-opcode.h \
227 $(OPCODE_DIR
)mips-opcode.h
$(OPCODE_DIR
)am29k-opcode.h \
228 $(OPCODE_DIR
)arm-opcode.h
$(OPCODE_DIR
)m88k-opcode.h \
229 $(OPCODE_DIR
)tahoe-opcode.h
231 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
233 MALLOCSRC
= gmalloc.c mcheck.c mtrace.c mtrace.awk \
234 ansidecl.h stdlib.h gmalloc.h stddef.h
236 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
$(MALLOCSRC
)
237 POSSLIBS
= $(POSSLIBS_MAINDIR
)
239 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
241 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
242 # would try to make it from tdesc.c.
243 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
244 OTHERS
= Makefile.
dist depend alldeps.mak Makefile.sdir \
245 createtags munch config.gdb config.status \
246 ChangeLog ChangeLog-3.x \
247 README TODO TAGS WHATS.NEW Projects \
248 .gdbinit COPYING expread.tab.c \
249 copying.c Convex.notes copying.awk \
250 saber.suppress standalone.c stuff.c kdb-start.c \
253 # Subdirectories of gdb, which should be included in their entirety in
255 TARDIRS
= doc hp-include
# tests
257 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
259 SOURCES
=$(SFILES
) $(ALLDEPFILES
)
260 TAGFILES
= $(SOURCES
) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
261 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
262 ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
263 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
265 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
266 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
267 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
268 command.o utils.o expread.o expprint.o environ.o version.o \
269 copying.o
$(DEPFILES
) signame.o cplus-dem.o mem-break.o target.o \
270 inftarg.o ieee-float.o putenv.o \
271 dbxread.o coffread.o
# mipsread.o
273 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
275 TSOBS
= core.o inflow.o
277 NTSOBS
= standalone.o
279 TSSTART
= /lib
/crt0.o
281 NTSSTART
= kdb-start.o
283 # Prevent Sun make from putting in the machine type. Setting
284 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
286 ${CC} -c
${CFLAGS} $<
291 cp gdb
$(bindir)/gdb.new
292 mv
$(bindir)/gdb.new
$(bindir)/gdb
295 init.c
: $(srcdir)/munch
$(MUNCH_DEFINE
) $(OBS
) $(TSOBS
)
296 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
298 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
299 ${CC-LD
} $(LDFLAGS
) -o gdb init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) \
302 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
303 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
304 #load ./init.c $(SFILES)
305 #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
306 #unload ${srcdir}/nindy-share/[A-Z]*
307 #load ${srcdir}/expread.tab.c
308 #load copying.c version.c
309 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
310 #load ${LIBIBERTY_DIR}/*.c
312 #load ${READLINE_DIR}/*.c
314 ##void mcheck(a) void (*a)(); { }
319 # This is useful when debugging GDB, because some Unix's don't let you run GDB
320 # on itself without copying the executable. So "make gdb1" will make
321 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
322 # Removing gdb1 before the copy is the right thing if gdb1 is open
323 # in another process.
328 # This is a remote stub which runs under unix and starts up an
329 # inferior process. This is at least useful for debugging GDB's
333 ${srcdir}/munch
${RAPP_OBS} > rapp_init.c
334 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
336 # Support for building Makefile out of configured pieces, automatically
337 # generated dependencies, etc.
338 Makefiles
= Makefile.sdir
$(M_MAKEFILE
) \
339 ${srcdir}/alldeps.mak
${srcdir}/Makefile.
dist
341 MAKE_MAKEFILE
= echo
"M_MAKEFILE=$(M_MAKEFILE)" | \
342 cat
- ${Makefiles} ${srcdir}/depend
> Makefile
344 Makefile
: $(Makefiles
)
347 alldeps.mak
: ${srcdir}/tconfig
${srcdir}/xconfig
348 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
349 for i in
`ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
350 ${srcdir}/xconfig/*[0-9A-Za-z] | \
351 grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
352 echo
$$i >>allconfig.tmp
; \
354 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
355 for (i = 2; i <= NF; i++) \
356 print $$i >> "alldeps.tmp" ; \
358 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
359 print $$2 >> "allparam.tmp" }' ; \
361 sort <alldeps.tmp | uniq | \
362 sed
-e
's/arm-convert.o/arm-convert.s/' \
363 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
364 -e
's!^nindy.o!nindy-share/nindy.c!' \
365 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
366 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
367 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
368 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
369 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
370 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
373 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
375 grep
-v
/ alldeps2.tmp | \
376 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
377 NR == 0 {printf $$0;} \
378 NR != 0 {printf "\\\n" $$0} \
379 END {printf "\n\n"}' >>alldeps.mak
;
380 grep
/ alldeps2.tmp | \
381 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
382 NR == 0 {printf $$0;} \
383 NR != 0 {printf "\\\n" $$0} \
384 END {printf "\n\n"}' >>alldeps.mak
;
385 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
386 NR == 0 {printf $$0;} \
387 NR != 0 {printf "\\\n" $$0} \
388 END {printf "\n\n"}' >>alldeps.mak
;
389 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
390 NR == 0 {printf $$0;} \
391 NR != 0 {printf "\\\n" $$0} \
392 END {printf "\n\n"}' >>alldeps.mak
;
393 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
395 # The sed script makes everything which depends on {x,t}m.h depend on
396 # config.status as well, in case someone reconfigures gdb out from
397 # under an already compiled gdb.
398 depend
: $(SOURCES
) Makefile.
dist
399 @echo Ignore errors about non-existent system-supplied
include files
400 @echo for systems other than the one you are using.
401 @echo
"If xm.h and tm.h don't exist, the error messages saying so"
402 @echo can safely be ignored.
403 @echo Also ignore parse errors in valops.c
, and any errors in
405 -$(GCC
) -MM
$(CFLAGS
) -I
$(BFD_DIR
) \
406 `ls $(SOURCES) | grep -v \.h$$ |sort -u` >depend.tmp
407 <depend.tmp sed
-e
's/ [xt]m.h/& config.status/g' \
408 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
409 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
410 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
411 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
412 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
413 -e
's; \./; $${srcdir}/;g' \
419 @echo
"You must configure gdb. Look at the README file for details."
422 # These are not generated by "make depend" because they only are there
424 # But these rules don't do what we want; we want to hack the foo.o: tm.h
425 # dependency to do the right thing.
426 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
427 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
428 xm-news1000.h
: xm-news.h
429 xm-i386-sv32.h
: xm-i386.h
430 tm-i386gas.h
: tm-i386.h
431 xm-sun4os4.h
: xm-sparc.h
432 tm-sun4os4.h
: tm-sparc.h
434 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
436 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
437 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
438 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
441 # Put the proper machine-specific files first.
442 # createtags will edit the .o in DEPFILES into .c
444 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
447 # FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
448 gdb.
tar.Z
: ${TARFILES} ${TARDIRS}
449 rm -f gdb.
tar; rm -rf
$(DIST
)
451 cd
$(DIST
) ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
452 cd
$(DIST
); for i in
${TARDIRS}; do \
453 (mkdir
$$i; cd
$$i; \
454 ln
-s ..
/..
/$$i/* .
; \
455 rm -rf SCCS CVS.adm RCS
); done
456 mkdir
$(DIST
)/xconfig
${DIST}/tconfig
457 cd
$(DIST
)/tconfig
; \
458 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
459 mkdir
$(DIST
)/vx-share
$(DIST
)/nindy-share
460 cd
$(DIST
)/tconfig
; \
461 for i in
$(SFILES_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
462 do ln
-s ..
/..
/$$i ..
/$$i ; done
463 tar chf
- $(DIST
) | compress
>gdb.
tar.Z
467 rm -f
${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
468 rm -f init.c init.o version.c
469 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
471 rm -f gdb.
dvi rdl-apps.texinfo gdb-all
*
473 distclean: clean expread.tab.c TAGS
474 rm -f tm.h xm.h config.status
475 rm -f y.output
yacc.acts
yacc.tmp
476 rm -f
${TESTS} Makefile
479 rm -f expread.tab.c TAGS
480 rm -f tm.h xm.h config.status
483 rdl-apps.texinfo
: ${READLINE_DIR}/inc-readline.texinfo \
484 ${READLINE_DIR}/inc-history.texinfo
485 echo
"@include ${READLINE_DIR}/inc-readline.texinfo" >rdl-apps.texinfo
486 echo
"@include ${READLINE_DIR}/inc-history.texinfo" >>rdl-apps.texinfo
488 gdb-all.texinfo
: ${SFILES_DOCDIR}
489 ( cd
$(srcdir)/doc
; \
490 ${M4} pretex.m4 none.m4
all.m4 gdb.texinfo
) >gdb-all.texinfo
492 gdb.
dvi : gdb-all.texinfo rdl-apps.texinfo
493 TEXINPUTS
=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
495 TEXINPUTS
=${TEXIDIR}:$$TEXINPUTS tex gdb-all.texinfo
496 mv gdb-all.
dvi gdb.
dvi
497 rm -f gdb-all.?? gdb-all.???
499 # This should work eventually, but we're using texinfo2, and many makeinfo's
500 # can't cope with all the markup. In the meantime, we distribute the info
501 # files as formatted by the elisp texinfo2 code.
502 #gdb.info: gdb-all.texinfo
503 # makeinfo gdb-all.texinfo
505 # Make copying.c from COPYING
506 copying.c
: COPYING copying.awk
507 awk
-f copying.awk
< COPYING
> copying.c
509 version.c
: Makefile.
dist
510 echo
'char *version = "$(VERSION)";' >version.c
512 ${srcdir}/expread.tab.c
: $(srcdir)/expread.y
513 @echo
'Expect 4 shift/reduce conflict.'
514 ${YACC} $(srcdir)/expread.y
515 mv y.tab.c
${srcdir}/expread.tab.c
517 expread.o
: ${srcdir}/expread.tab.c defs.h param.h symtab.h \
519 $(CC
) -c
${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
520 mv expread.tab.o expread.o
522 # dbxread, coffread, mipsread have dependencies on BFD header files.
523 dbxread.o
: ${srcdir}/dbxread.c
524 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
526 coffread.o
: ${srcdir}/coffread.c
527 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
529 mipsread.o
: ${srcdir}/mipsread.c
530 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
532 # Drag in the files that are in another directory.
534 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
535 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
537 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
538 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
540 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
541 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
543 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
544 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
546 nindy.o
: ${srcdir}/nindy-share
/nindy.c
547 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/nindy.c
549 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
550 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/Onindy.c
552 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
553 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
555 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
556 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
558 tdesc-lib
/libdc.o
: force_update
559 cd tdesc-lib
; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
562 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
)
565 cxref
-I.
$(SFILES
) >gdb.cxref
569 # When used with GDB, the demangler should never look for leading
570 # underscores because GDB strips them off during symbol read-in. Thus
573 cplus-dem.o
: cplus-dem.c
574 ${CC} -c
${CFLAGS} -Dnounderscore \
575 `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`