1 # Copyright (C) 1989-2015 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 exec_prefix = @
exec_prefix@
21 host_alias
= @host_alias@
22 target_alias
= @target_alias@
23 program_transform_name
= @program_transform_name@
26 tooldir
= $(libdir)/$(target_alias
)
29 localedir
= @localedir@
31 man1dir = $(mandir)/man1
32 man2dir = $(mandir)/man2
33 man3dir = $(mandir)/man3
34 man4dir = $(mandir)/man4
35 man5dir = $(mandir)/man5
36 man6dir = $(mandir)/man6
37 man7dir = $(mandir)/man7
38 man8dir = $(mandir)/man8
39 man9dir = $(mandir)/man9
41 datarootdir
= @datarootdir@
45 includedir = @
includedir@
47 install_sh
= @install_sh@
49 # This can be referenced by `LIBINTL' as computed by
50 # ZW_GNU_GETTEXT_SISTER_DIR.
60 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
61 INSTALL_SCRIPT
= @INSTALL_SCRIPT@
62 INSTALL_STRIP_PROGRAM
= @INSTALL_STRIP_PROGRAM@
63 INSTALL_DATA
= @INSTALL_DATA@
82 # The name of the compiler to use.
85 # If you are compiling with GCC, make sure that either 1) You have the
86 # fixed include files where GCC can reach them, or 2) You use the
87 # -traditional flag. Otherwise the ioctl calls in inflow.c
88 # will be incorrectly compiled. The "fixincludes" script in the gcc
89 # distribution will fix your include files up.
93 # Dependency tracking information.
96 depcomp
= $(SHELL
) $(srcdir)/..
/depcomp
98 # Note that these are overridden by GNU make-specific code below if
99 # GNU make is used. The overrides implement dependency tracking.
100 COMPILE.pre
= $(COMPILER
)
101 COMPILE.post
= -c
-o
$@
102 COMPILE
= $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(COMPILE.post
)
105 # Directory containing source files.
108 top_srcdir
= @top_srcdir@
112 # This is used to rebuild ada-lex.c from ada-lex.l. If the program is
113 # not defined, but ada-lex.c is present, compilation will continue,
114 # possibly with a warning.
117 YLWRAP
= $(srcdir)/..
/ylwrap
119 # where to find makeinfo, preferably one designed for texinfo-2
120 MAKEINFO
= @MAKEINFO@
121 MAKEINFOFLAGS
= @MAKEINFOFLAGS@
122 MAKEINFO_EXTRA_FLAGS
= @MAKEINFO_EXTRA_FLAGS@
123 MAKEINFO_CMD
= $(MAKEINFO
) $(MAKEINFOFLAGS
) $(MAKEINFO_EXTRA_FLAGS
)
125 MAKEHTML
= $(MAKEINFO_CMD
) --html
128 # Set this up with gcc if you have gnu ld and the loader will print out
129 # line numbers for undefined references.
133 # Where is our "include" directory? Typically $(srcdir)/../include.
134 # This is essentially the header file directory for the library
135 # routines in libiberty.
136 INCLUDE_DIR
= $(srcdir)/..
/include
137 INCLUDE_CFLAGS
= -I
$(INCLUDE_DIR
)
139 # Where is the "-liberty" library? Typically in ../libiberty.
140 LIBIBERTY
= ..
/libiberty
/libiberty.a
142 # Where is the BFD library? Typically in ../bfd.
144 BFD
= $(BFD_DIR
)/libbfd.a
145 BFD_SRC
= $(srcdir)/$(BFD_DIR
)
146 BFD_CFLAGS
= -I
$(BFD_DIR
) -I
$(BFD_SRC
)
148 # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
149 # -I../zlib, unless we were configured with --with-system-zlib, in which
150 # case both are empty.
154 # Where is the decnumber library? Typically in ../libdecnumber.
155 LIBDECNUMBER_DIR
= ..
/libdecnumber
156 LIBDECNUMBER
= $(LIBDECNUMBER_DIR
)/libdecnumber.a
157 LIBDECNUMBER_SRC
= $(srcdir)/$(LIBDECNUMBER_DIR
)
158 LIBDECNUMBER_CFLAGS
= -I
$(LIBDECNUMBER_DIR
) -I
$(LIBDECNUMBER_SRC
)
160 # Where is the READLINE library? Typically in ../readline.
161 READLINE_DIR
= ..
/readline
162 READLINE_SRC
= $(srcdir)/$(READLINE_DIR
)
163 READLINE
= @READLINE@
164 READLINE_DEPS
= @READLINE_DEPS@
165 READLINE_CFLAGS
= @READLINE_CFLAGS@
167 # Where is expat? This will be empty if expat was not available.
168 LIBEXPAT
= @LIBEXPAT@
170 # Where is lzma? This will be empty if lzma was not available.
173 # Where is libbabeltrace? This will be empty if lbabeltrace was not
175 LIBBABELTRACE
= @LIBBABELTRACE@
177 # Where is libipt? This will be empty if libipt was not available.
180 WARN_CFLAGS
= @WARN_CFLAGS@
181 WERROR_CFLAGS
= @WERROR_CFLAGS@
182 GDB_WARN_CFLAGS
= $(WARN_CFLAGS
)
183 GDB_WERROR_CFLAGS
= $(WERROR_CFLAGS
)
185 GDB_WARN_CFLAGS_NO_FORMAT
= `echo " $(GDB_WARN_CFLAGS) " \
186 | sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
187 GDB_WARN_CFLAGS_NO_DEFS
= `echo " $(GDB_WARN_CFLAGS) " \
188 | sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
190 RDYNAMIC
= @RDYNAMIC@
192 # Where is the INTL library? Typically in ../intl.
194 INTL_DEPS
= @LIBINTL_DEP@
195 INTL_CFLAGS
= @INCINTL@
197 # Did the user give us a --with-gdb-datadir option?
198 GDB_DATADIR
= @GDB_DATADIR@
200 # Flags to pass to gdb when invoked with "make run".
203 # Helper code from gnulib.
204 GNULIB_BUILDDIR
= build-gnulib
205 LIBGNU
= $(GNULIB_BUILDDIR
)/import
/libgnu.a
206 INCGNU
= -I
$(srcdir)/gnulib
/import
-I
$(GNULIB_BUILDDIR
)/import
208 # Generated headers in the gnulib directory. These must be listed
209 # so that they are generated before other files are compiled.
210 GNULIB_H
= $(GNULIB_BUILDDIR
)/import
/string.h @GNULIB_STDINT_H@
213 # CLI sub directory definitons
217 cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
219 cli-interp.o cli-utils.o
222 cli
/cli-decode.c cli
/cli-script.c cli
/cli-cmds.c cli
/cli-setshow.c \
224 cli
/cli-interp.c cli
/cli-utils.c
230 # MI sub directory definitons
233 mi-out.o mi-console.o \
234 mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
235 mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
236 mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
237 mi-cmd-info.o mi-interp.o \
238 mi-main.o mi-parse.o mi-getopt.o
240 mi
/mi-out.c mi
/mi-console.c \
241 mi
/mi-cmds.c mi
/mi-cmd-catch.c mi
/mi-cmd-env.c \
242 mi
/mi-cmd-var.c mi
/mi-cmd-break.c mi
/mi-cmd-stack.c \
243 mi
/mi-cmd-file.c mi
/mi-cmd-disas.c mi
/mi-symbol-cmds.c \
244 mi
/mi-cmd-target.c mi
/mi-cmd-info.c mi
/mi-interp.c \
245 mi
/mi-main.c mi
/mi-parse.c mi
/mi-getopt.c
251 # TUI sub directory definitions
288 tui
/tui-wingeneral.c \
289 tui
/tui-winsource.c \
298 # GCC Compile support sub-directory definitions
300 SUBDIR_GCC_COMPILE_OBS
= \
301 compile.o compile-c-symbols.o compile-c-types.o \
302 compile-object-load.o compile-object-run.o \
303 compile-loc2c.o compile-c-support.o
304 SUBDIR_GCC_COMPILE_SRCS
= \
306 compile
/compile-c-symbols.c \
307 compile
/compile-c-types.c \
308 compile
/compile-object-load.c \
309 compile
/compile-object-load.h \
310 compile
/compile-object-run.c \
311 compile
/compile-object-run.h \
312 compile
/compile-loc2c.c \
313 compile
/compile-c-support.c
315 # Guile sub directory definitons for guile support.
343 SUBDIR_GUILE_SRCS
= \
346 guile
/scm-auto-load.c \
348 guile
/scm-breakpoint.c \
351 guile
/scm-exception.c \
354 guile
/scm-iterator.c \
355 guile
/scm-lazy-string.c \
356 guile
/scm-objfile.c \
360 guile
/scm-pretty-print.c \
361 guile
/scm-progspace.c \
362 guile
/scm-safe-call.c \
370 SUBDIR_GUILE_LDFLAGS
=
374 # python sub directory definitons
376 SUBDIR_PYTHON_OBS
= \
390 py-finishbreakpoint.o \
400 py-newobjfileevent.o \
416 SUBDIR_PYTHON_SRCS
= \
419 python
/py-auto-load.c \
421 python
/py-bpevent.c \
422 python
/py-breakpoint.c \
424 python
/py-continueevent.c \
425 python
/py-xmethods.c \
427 python
/py-evtregistry.c \
429 python
/py-exitedevent.c \
430 python
/py-finishbreakpoint.c \
432 python
/py-framefilter.c \
433 python
/py-function.c \
434 python
/py-gdb-readline.c \
435 python
/py-inferior.c \
436 python
/py-infevents.c \
437 python
/py-infthread.c \
438 python
/py-lazy-string.c \
439 python
/py-linetable.c \
440 python
/py-newobjfileevent.c \
441 python
/py-objfile.c \
443 python
/py-prettyprint.c \
444 python
/py-progspace.c \
445 python
/py-signalevent.c \
446 python
/py-stopevent.c \
449 python
/py-threadevent.c \
456 SUBDIR_PYTHON_LDFLAGS
=
457 SUBDIR_PYTHON_CFLAGS
=
459 # Opcodes currently live in one of two places. Either they are in the
460 # opcode library, typically ../opcodes, or they are in a header file
462 # Where is the "-lopcodes" library, with (some of) the opcode tables and
464 OPCODES_DIR
= ..
/opcodes
465 OPCODES_SRC
= $(srcdir)/$(OPCODES_DIR
)
466 OPCODES
= $(OPCODES_DIR
)/libopcodes.a
467 # Where are the other opcode tables which only have header file
469 OP_INCLUDE
= $(INCLUDE_DIR
)/opcode
470 # Some source files like to use #include "opcodes/file.h"
471 OPCODES_CFLAGS
= -I
$(OP_INCLUDE
) -I
$(OPCODES_SRC
)/..
473 # The simulator is usually nonexistent; targets that include one
474 # should set this to list all the .o or .a files to be linked in.
477 WIN32LIBS
= @WIN32LIBS@
479 # Tcl et al cflags and libraries
481 TCL_CFLAGS
= @TCL_INCLUDE@
482 GDBTKLIBS
= @GDBTKLIBS@
483 # Extra flags that the GDBTK files need:
484 GDBTK_CFLAGS
= @GDBTK_CFLAGS@
487 TK_CFLAGS
= @TK_INCLUDE@
489 X11_CFLAGS
= @TK_XINCLUDES@
493 WIN32LDAPP
= @WIN32LDAPP@
496 GUI_CFLAGS_X
= @GUI_CFLAGS_X@
497 IDE_CFLAGS
=$(GUI_CFLAGS_X
) $(IDE_CFLAGS_X
)
499 ALL_TCL_CFLAGS
= $(TCL_CFLAGS
) $(TK_CFLAGS
)
501 # The version of gdbtk we're building. This should be kept
502 # in sync with GDBTK_VERSION and friends in gdbtk.h.
504 GDBTK_LIBRARY
= $(datadir)/insight
$(GDBTK_VERSION
)
506 # Gdbtk requires an absolute path to the source directory or
507 # the testsuite won't run properly.
508 GDBTK_SRC_DIR
= @GDBTK_SRC_DIR@
511 gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
512 gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
513 SUBDIR_GDBTK_SRCS
= \
514 gdbtk
/generic
/gdbtk.c gdbtk
/generic
/gdbtk-bp.c \
515 gdbtk
/generic
/gdbtk-cmds.c gdbtk
/generic
/gdbtk-hooks.c \
516 gdbtk
/generic
/gdbtk-interp.c \
517 gdbtk
/generic
/gdbtk-register.c gdbtk
/generic
/gdbtk-stack.c \
518 gdbtk
/generic
/gdbtk-varobj.c gdbtk
/generic
/gdbtk-wrapper.c \
519 gdbtk
/generic
/gdbtk-main.c
520 SUBDIR_GDBTK_DEPS
= $(LIBGUI
) $(TCL_DEPS
) $(TK_DEPS
)
521 SUBDIR_GDBTK_LDFLAGS
=
522 SUBDIR_GDBTK_CFLAGS
= -DGDBTK
524 CONFIG_OBS
= @CONFIG_OBS@
525 CONFIG_SRCS
= @CONFIG_SRCS@
526 CONFIG_DEPS
= @CONFIG_DEPS@
527 CONFIG_LDFLAGS
= @CONFIG_LDFLAGS@
528 ENABLE_CFLAGS
= @ENABLE_CFLAGS@
529 CONFIG_ALL
= @CONFIG_ALL@
530 CONFIG_CLEAN
= @CONFIG_CLEAN@
531 CONFIG_INSTALL
= @CONFIG_INSTALL@
532 CONFIG_UNINSTALL
= @CONFIG_UNINSTALL@
533 HAVE_NATIVE_GCORE_TARGET
= @HAVE_NATIVE_GCORE_TARGET@
535 # -I. for config files.
536 # -I$(srcdir) for gdb internal headers.
537 # -I$(srcdir)/config for more generic config files.
539 # It is also possible that you will need to add -I/usr/include/sys if
540 # your system doesn't have fcntl.h in /usr/include (which is where it
541 # should be according to Posix).
543 GDB_CFLAGS
= -I.
-I
$(srcdir) -I
$(srcdir)/common
-I
$(srcdir)/config \
544 -DLOCALEDIR
="\"$(localedir)\"" $(DEFS
)
546 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
547 GLOBAL_CFLAGS
= $(MH_CFLAGS
)
549 PROFILE_CFLAGS
= @PROFILE_CFLAGS@
551 # CFLAGS is specifically reserved for setting from the command line
552 # when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
555 # Set by configure, for e.g. expat. Python installations are such that
556 # C headers are included using their basename (for example, we #include
557 # <Python.h> rather than, say, <python/Python.h>). Since the file names
558 # are sometimes a little generic, we think that the risk of collision
559 # with other header files is high. If that happens, we try to mitigate
560 # a bit the consequences by putting the Python includes last in the list.
561 INTERNAL_CPPFLAGS
= @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
563 # Need to pass this to testsuite for "make check". Probably should be
564 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
565 # so "make check" has the same result no matter where it is run.
568 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
569 INTERNAL_CFLAGS_BASE
= \
570 $(CFLAGS
) $(GLOBAL_CFLAGS
) $(PROFILE_CFLAGS
) \
571 $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) $(ZLIBINC
) \
572 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) $(LIBDECNUMBER_CFLAGS
) \
573 $(INTL_CFLAGS
) $(INCGNU
) $(ENABLE_CFLAGS
) $(INTERNAL_CPPFLAGS
)
574 INTERNAL_WARN_CFLAGS
= $(INTERNAL_CFLAGS_BASE
) $(GDB_WARN_CFLAGS
)
575 INTERNAL_CFLAGS
= $(INTERNAL_WARN_CFLAGS
) $(GDB_WERROR_CFLAGS
)
577 # LDFLAGS is specifically reserved for setting from the command line
581 # Profiling options need to go here to work.
582 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
583 # and have it work; that's why CFLAGS is here.
584 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
585 INTERNAL_LDFLAGS
= $(CFLAGS
) $(GLOBAL_CFLAGS
) $(MH_LDFLAGS
) $(LDFLAGS
) $(CONFIG_LDFLAGS
)
587 # If your system is missing alloca(), or, more likely, it's there but
588 # it doesn't work, then refer to libiberty.
590 # Libraries and corresponding dependencies for compiling gdb.
591 # XM_CLIBS, defined in *config files, have host-dependent libs.
592 # LIBIBERTY appears twice on purpose.
593 CLIBS
= $(SIM
) $(READLINE
) $(OPCODES
) $(BFD
) $(ZLIB
) $(INTL
) $(LIBIBERTY
) $(LIBDECNUMBER
) \
594 $(XM_CLIBS
) $(NAT_CLIBS
) $(GDBTKLIBS
) \
595 @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
596 $(LIBEXPAT
) $(LIBLZMA
) $(LIBBABELTRACE
) $(LIBIPT
) \
597 $(LIBIBERTY
) $(WIN32LIBS
) $(LIBGNU
)
598 CDEPS
= $(XM_CDEPS
) $(NAT_CDEPS
) $(SIM
) $(BFD
) $(READLINE_DEPS
) \
599 $(OPCODES
) $(INTL_DEPS
) $(LIBIBERTY
) $(CONFIG_DEPS
) $(LIBGNU
)
601 ADD_FILES
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
602 ADD_DEPS
= $(XM_ADD_FILES
) $(TM_ADD_FILES
) $(NAT_ADD_FILES
)
607 LINTFLAGS
= $(GDB_CFLAGS
) $(OPCODES_CFLAGS
) $(READLINE_CFLAGS
) \
608 $(BFD_CFLAGS
) $(INCLUDE_CFLAGS
) \
614 # XML files to build in to GDB.
615 XMLFILES
= $(srcdir)/features
/gdb-target.dtd
$(srcdir)/features
/xinclude.dtd \
616 $(srcdir)/features
/library-list.dtd \
617 $(srcdir)/features
/library-list-aix.dtd \
618 $(srcdir)/features
/library-list-svr4.dtd
$(srcdir)/features
/osdata.dtd \
619 $(srcdir)/features
/threads.dtd
$(srcdir)/features
/traceframe-info.dtd \
620 $(srcdir)/features
/btrace.dtd
$(srcdir)/features
/btrace-conf.dtd
622 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
623 # interface to the serial port. Hopefully if get ported to OS/2, VMS,
624 # etc., then there will be (as part of the C library or perhaps as
625 # part of libiberty) a POSIX interface. But at least for now the
626 # host-dependent makefile fragment might need to use something else
628 SER_HARDWIRE
= @SER_HARDWIRE@
630 # The `remote' debugging target is supported for most architectures,
631 # but not all (e.g. 960)
632 REMOTE_OBS
= remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
633 remote-notif.o ctf.o tracefile.o tracefile-tfile.o
635 # This is remote-sim.o if a simulator is to be linked in.
638 # Target-dependent object files.
639 TARGET_OBS
= @TARGET_OBS@
641 # All target-dependent objects files that require 64-bit CORE_ADDR
642 # (used with --enable-targets=all --enable-64-bit-bfd).
643 ALL_64_TARGET_OBS
= \
644 aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o \
645 alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
646 alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
647 amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
648 amd64-linux-tdep.o amd64nbsd-tdep.o \
649 amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
650 ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
652 sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
653 sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
655 # All other target-dependent objects files (used with --enable-targets=all).
657 armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
658 armnbsd-tdep.o armobsd-tdep.o \
659 arm-tdep.o arm-wince-tdep.o \
661 bfin-linux-tdep.o bfin-tdep.o \
662 cris-linux-tdep.o cris-tdep.o \
665 frv-linux-tdep.o frv-tdep.o \
668 hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
669 hppa-linux-tdep.o hppa-tdep.o \
670 i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
671 i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
672 i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
673 i386-dicos-tdep.o i386-darwin-tdep.o \
678 m32r-linux-tdep.o m32r-tdep.o \
680 m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
683 microblaze-tdep.o microblaze-linux-tdep.o \
684 mips-linux-tdep.o mips-sde-tdep.o \
685 mipsnbsd-tdep.o mips-tdep.o \
686 mn10300-linux-tdep.o mn10300-tdep.o \
690 nios2-tdep.o nios2-linux-tdep.o \
692 ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
693 ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
694 rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
695 rs6000-lynx178-tdep.o \
699 sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
700 sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
701 sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
702 spu-tdep.o spu-multiarch.o solib-spu.o \
703 tic6x-tdep.o tic6x-linux-tdep.o \
704 tilegx-tdep.o tilegx-linux-tdep.o \
706 vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
708 xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
711 nbsd-tdep.o obsd-tdep.o \
713 solib-frv.o solib-svr4.o \
714 solib-darwin.o solib-dsbt.o \
715 dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
716 remote-m32r-sdi.o remote-mips.o \
723 # Host-dependent makefile fragment comes in here.
725 # End of host-dependent makefile fragment
729 "exec_prefix=$(exec_prefix)" \
730 "infodir=$(infodir)" \
731 "datarootdir=$(datarootdir)" \
733 "htmldir=$(htmldir)" \
737 "datadir=$(datadir)" \
738 "includedir=$(includedir)" \
739 "against=$(against)" \
740 "DESTDIR=$(DESTDIR)" \
742 "AR_FLAGS=$(AR_FLAGS)" \
746 "CXXFLAGS=$(CXXFLAGS)" \
747 "DLLTOOL=$(DLLTOOL)" \
748 "LDFLAGS=$(LDFLAGS)" \
750 "MAKEINFO=$(MAKEINFO)" \
751 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
752 "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
753 "MAKEHTML=$(MAKEHTML)" \
754 "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
755 "INSTALL=$(INSTALL)" \
756 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
757 "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
758 "INSTALL_DATA=$(INSTALL_DATA)" \
759 "RUNTEST=$(RUNTEST)" \
760 "RUNTESTFLAGS=$(RUNTESTFLAGS)"
762 # Flags that we pass when building the testsuite.
764 # empty for native, $(target_alias)/ for cross
765 target_subdir
= @target_subdir@
768 if [ -f $${rootme}/../gcc/xgcc ] ; then \
769 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
770 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
772 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
775 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
778 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
783 if [ -f $${rootme}/../gcc/xg++ ] ; then \
784 if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
785 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
787 echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
790 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
793 t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
797 # The use of $$(x_FOR_TARGET) reduces the command line length by not
798 # duplicating the lengthy definition.
799 TARGET_FLAGS_TO_PASS
= \
801 "exec_prefix=$(exec_prefix)" \
802 "against=$(against)" \
803 'CC=$$(CC_FOR_TARGET)' \
804 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
806 'CXX=$$(CXX_FOR_TARGET)' \
807 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
808 "CXXFLAGS=$(CXXFLAGS)" \
809 "INSTALL=$(INSTALL)" \
810 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
811 "INSTALL_DATA=$(INSTALL_DATA)" \
812 "MAKEINFO=$(MAKEINFO)" \
813 "MAKEHTML=$(MAKEHTML)" \
814 "RUNTEST=$(RUNTEST)" \
815 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
816 "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
819 # All source files that go into linking GDB.
820 # Links made at configuration time should not be specified here, since
821 # SFILES is used in building the distribution archive.
823 SFILES
= ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
825 addrmap.c auto-load.c \
826 auxv.c ax-general.c ax-gdb.c \
830 block.c blockframe.c \
831 breakpoint.c break-catch-sig.c break-catch-throw.c \
832 break-catch-syscall.c \
833 build-id.c buildsym.c \
834 c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
835 charset.c common
/cleanups.c cli-out.c coffread.c coff-pe-read.c \
836 complaints.c completer.c continuations.c corefile.c corelow.c \
837 cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
838 d-exp.y d-lang.c d-valprint.c \
840 dbxread.c demangle.c dictionary.c disasm.c doublest.c \
841 dtrace-probe.c dummy-frame.c \
842 dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
843 dwarf2-frame-tailcall.c \
844 elfread.c environ.c eval.c event-loop.c event-top.c \
845 exceptions.c expprint.c extension.c \
846 f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
847 findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
848 gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
849 gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
850 go-exp.y go-lang.c go-typeprint.c go-valprint.c \
853 infcmd.c inflow.c infrun.c \
856 jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c jv-varobj.c \
857 language.c linespec.c minidebug.c \
858 m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
859 macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
860 mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
861 memrange.c mi
/mi-common.c \
863 objfiles.c osabi.c observer.c osdata.c \
865 p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
866 proc-service.list progspace.c \
867 prologue-value.c psymtab.c \
868 regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
870 serial.c ser-base.c ser-unix.c skip.c \
871 solib.c solib-target.c source.c \
872 stabsread.c stack.c probe.c stap-probe.c std-regs.c \
873 symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
874 target.c target-dcache.c target-descriptions.c target-memory.c \
875 thread.c top.c tracepoint.c \
879 ui-out.c utils.c ui-file.h ui-file.c \
881 valarith.c valops.c valprint.c value.c varobj.c common
/vec.c \
882 xml-tdesc.c xml-support.c \
883 inferior.c gdb_usleep.c \
884 record.c record-full.c gcore.c \
887 annotate.c common
/signals.c copying.c dfp.c gdb.c inf-child.c \
888 sol-thread.c stub-termcap.c \
889 common
/gdb_vecs.c common
/common-utils.c common
/xml-utils.c \
890 common
/ptid.c common
/buffer.c gdb-dlfcn.c common
/agent.c \
891 common
/format.c common
/filestuff.c btrace.c record-btrace.c ctf.c \
892 target
/waitstatus.c common
/print-utils.c common
/rsp-low.c \
893 common
/errors.c common
/common-debug.c common
/common-exceptions.c \
894 common
/btrace-common.c common
/fileio.c \
895 $(SUBDIR_GCC_COMPILE_SRCS
)
897 LINTFILES
= $(SFILES
) $(YYFILES
) $(CONFIG_SRCS
) init.c
899 # Header files that need to have srcdir added. Note that in the cases
900 # where we use a macro like $(gdbcmd_h), things are carefully arranged
901 # so that each .h file is listed exactly once (M-x tags-search works
902 # wrong if TAGS has files twice). Because this is tricky to get
903 # right, it is probably easiest just to list .h files here directly.
906 common
/gdb_signals.h nat
/gdb_thread_db.h common
/gdb_vecs.h \
907 common
/x86-xstate.h nat
/linux-ptrace.h nat
/mips-linux-watch.h \
908 proc-utils.h aarch64-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
909 ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
910 exec.h m32r-tdep.h osabi.h gdbcore.h amd64bsd-nat.h \
911 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
912 ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
913 nto-tdep.h serial.h \
914 c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli
/cli-setshow.h \
915 cli
/cli-decode.h cli
/cli-cmds.h cli
/cli-utils.h \
916 cli
/cli-script.h macrotab.h symtab.h common
/version.h \
917 compile
/compile.h gnulib
/import
/string.in.h gnulib
/import
/str-two-way.h \
918 gnulib
/import
/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
919 gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
920 amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
921 gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
922 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
923 ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
924 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
925 objfiles.h common
/vec.h disasm.h mips-tdep.h ser-base.h \
926 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
927 inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
928 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
929 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
930 target.h target-dcache.h prologue-value.h cp-abi.h tui
/tui-hooks.h tui
/tui.h \
931 tui
/tui-file.h tui
/tui-command.h tui
/tui-disasm.h tui
/tui-wingeneral.h \
932 tui
/tui-windata.h tui
/tui-data.h tui
/tui-win.h tui
/tui-stack.h \
933 tui
/tui-winsource.h tui
/tui-regs.h tui
/tui-io.h tui
/tui-layout.h \
934 tui
/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
935 expression.h score-tdep.h gdb_select.h ser-tcp.h \
936 extension.h extension-priv.h nat
/aarch64-linux-hw-point.h \
937 build-id.h buildsym.h valprint.h \
938 typeprint.h mi
/mi-getopt.h mi
/mi-parse.h mi
/mi-console.h \
939 mi
/mi-out.h mi
/mi-main.h mi
/mi-common.h mi
/mi-cmds.h linux-nat.h \
940 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
941 common
/gdb_wait.h common
/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
942 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
943 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
944 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h \
945 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
946 m68k-tdep.h spu-tdep.h jv-lang.h environ.h amd64-tdep.h \
947 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
948 rs6000-tdep.h rs6000-aix-tdep.h \
949 common
/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
950 language.h nbsd-tdep.h solib-svr4.h \
951 macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
952 inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
953 regformats
/regdef.h config
/i386
/nm-i386gnu.h \
954 config
/i386
/nm-fbsd.h \
955 config
/nm-nto.h config
/sparc
/nm-sol2.h config
/nm-linux.h \
956 top.h bsd-kvm.h gdb-stabs.h reggroups.h \
957 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
958 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
959 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
960 gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
961 psymtab.h psympriv.h progspace.h bfin-tdep.h \
962 amd64-darwin-tdep.h charset-list.h \
963 config
/djgpp
/langinfo.h config
/djgpp
/nl_types.h darwin-nat.h \
964 dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
965 i386-darwin-tdep.h i386-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
967 osdata.h procfs.h python
/py-event.h python
/py-events.h python
/py-stopevent.h \
968 python
/python-internal.h python
/python.h ravenscar-thread.h record.h \
969 record-full.h solib-aix.h \
970 solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
971 gnulib
/import
/extra
/snippet
/arg-nonnull.h gnulib
/import
/extra
/snippet
/c
++defs.h \
972 gnulib
/import
/extra
/snippet
/warn-on-use.h \
973 gnulib
/import
/stddef.in.h gnulib
/import
/inttypes.in.h inline-frame.h skip.h \
974 common
/common-utils.h common
/xml-utils.h common
/buffer.h common
/ptid.h \
975 common
/format.h common
/host-defs.h utils.h common
/queue.h \
976 nat
/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
977 gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat
/linux-btrace.h \
978 nat
/ppc-linux.h ctf.h nat
/x86-cpuid.h nat
/x86-gcc-cpuid.h target
/resume.h \
979 target
/wait.h target
/waitstatus.h nat
/linux-nat.h nat
/linux-waitpid.h \
980 common
/print-utils.h common
/rsp-low.h nat
/x86-dregs.h x86-linux-nat.h \
981 i386-linux-nat.h common
/common-defs.h common
/errors.h common
/common-types.h \
982 common
/common-debug.h common
/cleanups.h common
/gdb_setjmp.h \
983 common
/common-exceptions.h target
/target.h common
/symbol.h \
984 common
/common-regcache.h fbsd-tdep.h nat
/linux-personality.h \
985 common
/fileio.h nat
/x86-linux.h nat
/x86-linux-dregs.h \
986 nat
/linux-namespaces.h
988 # Header files that already have srcdir in them, or which are in objdir.
990 HFILES_WITH_SRCDIR
= ..
/bfd
/bfd.h jit-reader.h
993 # GDB "info" files, which should be included in their entirety
994 INFOFILES
= gdb.
info*
996 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
997 # default their values the way we do for SER_HARDWIRE; in the future
998 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
999 # variables analogous to SER_HARDWIRE which get defaulted in this
1002 DEPFILES
= $(TARGET_OBS
) $(SER_HARDWIRE
) $(NATDEPFILES
) \
1003 $(REMOTE_OBS
) $(SIM_OBS
)
1005 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
) $(CONFIG_SRCS
)
1006 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1007 # and it's more useful to see it in the .y file.
1008 TAGFILES_NO_SRCDIR
= $(SFILES
) $(HFILES_NO_SRCDIR
) $(ALLDEPFILES
) \
1010 TAGFILES_WITH_SRCDIR
= $(HFILES_WITH_SRCDIR
)
1012 COMMON_OBS
= $(DEPFILES
) $(CONFIG_OBS
) $(YYOBJ
) \
1016 auto-load.o auxv.o \
1019 blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
1020 break-catch-syscall.o \
1021 findvar.o regcache.o cleanups.o \
1022 charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
1023 source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
1024 block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
1025 linespec.o dictionary.o \
1028 expprint.o environ.o stack.o thread.o \
1037 macrotab.o macrocmd.o macroexp.o macroscope.o \
1039 event-loop.o event-top.o inf-loop.o completer.o \
1040 gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
1042 memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
1043 build-id.o buildsym.o \
1048 bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
1049 dbxread.o coffread.o coff-pe-read.o \
1050 dwarf2read.o mipsread.o stabsread.o corefile.o \
1051 dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
1052 ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
1053 ada-tasks.o ada-varobj.o c-varobj.o \
1054 ui-out.o cli-out.o \
1056 go-lang.o go-valprint.o go-typeprint.o \
1057 jv-lang.o jv-valprint.o jv-typeprint.o jv-varobj.o \
1058 m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
1060 complaints.o typeprint.o \
1061 ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
1062 ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
1064 serial.o mdebugread.o top.o utils.o \
1067 frame.o frame-unwind.o doublest.o \
1070 gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
1075 solib.o solib-target.o \
1076 prologue-value.o memory-map.o memrange.o \
1077 xml-support.o xml-syscall.o xml-utils.o \
1078 target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
1079 inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
1080 gdb_vecs.o jit.o progspace.o skip.o probe.o \
1081 common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
1082 format.o registry.o btrace.o record-btrace.o waitstatus.o \
1083 print-utils.o rsp-low.o errors.o common-debug.o debug.o \
1084 common-exceptions.o btrace-common.o fileio.o \
1085 $(SUBDIR_GCC_COMPILE_OBS
)
1089 SUBDIRS
= doc @subdirs@ data-directory
$(GNULIB_BUILDDIR
)
1090 CLEANDIRS
= $(SUBDIRS
)
1092 # List of subdirectories in the build tree that must exist.
1093 # This is used to force build failures in existing trees when
1094 # a new directory is added.
1095 # The format here is for the `case' shell command.
1096 REQUIRED_SUBDIRS
= doc | testsuite |
$(GNULIB_BUILDDIR
) | data-directory
1098 # For now, shortcut the "configure GDB for fewer languages" stuff.
1104 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1109 d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o
1111 # Things which need to be built when making a distribution.
1113 DISTSTUFF
= $(YYFILES
)
1116 # All generated files which can be included by another file.
1117 generated_files
= config.h observer.h observer.inc ada-lex.c jit-reader.h \
1118 $(GNULIB_H
) $(NAT_GENERATED_FILES
) gcore
1124 all: gdb
$(EXEEXT
) $(CONFIG_ALL
)
1125 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1129 # The check target can not use subdir_do, because subdir_do does not
1130 # use TARGET_FLAGS_TO_PASS.
1132 @if
[ -f testsuite
/Makefile
]; then \
1133 rootme
=`pwd`; export rootme
; \
1134 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1136 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check; \
1140 @if
[ -f testsuite
/Makefile
]; then \
1141 rootme
=`pwd`; export rootme
; \
1142 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1144 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-perf
; \
1148 @if
[ -f testsuite
/Makefile
]; then \
1149 rootme
=`pwd`; export rootme
; \
1150 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1152 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) check-read1
; \
1155 # The idea is to parallelize testing of multilibs, for example:
1156 # make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1157 # will run 3 concurrent sessions of check, eventually testing all 10
1158 # combinations. GNU make is required for the % pattern to work, as is
1159 # a shell that expands alternations within braces. If GNU make is not
1160 # used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
1161 # prevent serialized checking due to the passed RUNTESTFLAGS.
1162 # FIXME: use config.status --config not --version, when available.
1164 @if
[ -f testsuite
/config.status
]; then \
1165 rootme
=`pwd`; export rootme
; \
1166 rootsrc
=`cd $(srcdir); pwd`; export rootsrc
; \
1167 target
=`echo "$@" | sed 's,//.*,,'`; \
1168 variant
=`echo "$@" | sed 's,^[^/]*//,,'`; \
1169 vardots
=`echo "$$variant" | sed 's,/,.,g'`; \
1170 testdir
=testsuite.
$$vardots; \
1171 if
[ ! -f
$$testdir/Makefile
] && [ -f testsuite
/config.status
]; then \
1172 configargs
=`cd testsuite && ./config.status --version | \
1173 sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1174 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$$testdir && \
1176 eval
$(SHELL
) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1177 "\"--srcdir=\$$rootsrc/testsuite\"" \
1179 else :; fi
&& cd
$$testdir && \
1180 $(MAKE
) $(TARGET_FLAGS_TO_PASS
) \
1181 RUNTESTFLAGS
="--target_board=$$variant $(RUNTESTFLAGS)" \
1182 FORCE_PARALLEL
=$(if
$(FORCE_PARALLEL
),1,$(if
$(RUNTESTFLAGS
),,1)) \
1186 # The set of headers checked by 'check-headers' by default.
1187 CHECK_HEADERS
= $(HFILES_NO_SRCDIR
)
1189 # Try to compile each header in isolation, thus ensuring headers are
1192 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1196 # make check-headers CHECK_HEADERS="header.h list.h"
1198 # to check specific headers.
1201 @echo Checking headers.
1202 for i in
$(CHECK_HEADERS
) ; do \
1203 $(CC
) -x c
-c
-fsyntax-only
$(INTERNAL_CFLAGS
) \
1204 -include defs.h
$(srcdir)/$$i ; \
1206 .PHONY
: check-headers
1208 info install-info clean-info
dvi pdf install-pdf html install-html
: force
1209 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
1211 # Traditionally "install" depends on "all". But it may be useful
1212 # not to; for example, if the user has made some trivial change to a
1213 # source file and doesn't care about rebuilding or just wants to save the
1214 # time it takes for make to check that all is up to date.
1215 # install-only is intended to address that need.
1217 @
$(MAKE
) $(FLAGS_TO_PASS
) install-only
1219 install-only
: $(CONFIG_INSTALL
)
1220 transformed_name
=`t='$(program_transform_name)'; \
1221 echo gdb | sed -e "$$t"` ; \
1222 if
test "x$$transformed_name" = x
; then \
1223 transformed_name
=gdb
; \
1227 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1228 $(INSTALL_PROGRAM
) gdb
$(EXEEXT
) \
1229 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
1230 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(includedir)/gdb
; \
1231 $(INSTALL_DATA
) jit-reader.h
$(DESTDIR
)$(includedir)/gdb
/jit-reader.h
1232 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1234 transformed_name
=`t='$(program_transform_name)'; \
1235 echo gcore | sed -e "$$t"` ; \
1236 if
test "x$$transformed_name" = x
; then \
1237 transformed_name
=gcore
; \
1241 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir) ; \
1242 $(INSTALL_SCRIPT
) gcore \
1243 $(DESTDIR
)$(bindir)/$$transformed_name; \
1245 @
$(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1248 $(MAKE
) $(FLAGS_TO_PASS
) INSTALL_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" \
1249 install_sh_PROGRAM
="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG
=-s \
1250 `test -z '$(STRIP)' || \
1251 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1254 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/guile
/gdb
1257 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(GDB_DATADIR
)/python
/gdb
1259 uninstall: force $(CONFIG_UNINSTALL
)
1260 transformed_name
=`t='$(program_transform_name)'; \
1261 echo gdb | sed -e $$t` ; \
1262 if
test "x$$transformed_name" = x
; then \
1263 transformed_name
=gdb
; \
1267 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) \
1268 $(DESTDIR
)$(man1dir)/$$transformed_name.1
1269 if
test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x
; \
1271 transformed_name
=`t='$(program_transform_name)'; \
1272 echo gcore | sed -e "$$t"` ; \
1273 if
test "x$$transformed_name" = x
; then \
1274 transformed_name
=gcore
; \
1278 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name; \
1280 @
$(MAKE
) DO
=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
1282 # The C++ name parser can be built standalone for testing.
1283 test-cp-name-parser.o
: cp-name-parser.c
1284 $(COMPILE
) -DTEST_CPNAMES cp-name-parser.c
1287 test-cp-name-parser
$(EXEEXT
): test-cp-name-parser.o
$(LIBIBERTY
)
1288 $(CC_LD
) $(INTERNAL_LDFLAGS
) -o test-cp-name-parser
$(EXEEXT
) \
1289 test-cp-name-parser.o
$(LIBIBERTY
)
1291 # We do this by grepping through sources. If that turns out to be too slow,
1292 # maybe we could just require every .o file to have an initialization routine
1293 # of a given name (top.o -> _initialize_top, etc.).
1295 # Formatting conventions: The name of the _initialize_* routines must start
1296 # in column zero, and must not be inside #if.
1298 # Note that the set of files with init functions might change, or the names
1299 # of the functions might change, so this files needs to depend on all the
1300 # object files that will be linked into gdb.
1302 # FIXME: There is a problem with this approach - init.c may force
1303 # unnecessary files to be linked in.
1305 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1306 # the first call is to _initialize_gdbtypes (implemented by explicitly
1307 # putting that function's name first in the init.l-tmp file). This is
1308 # a hack to ensure that all the architecture dependant global
1309 # builtin_type_* variables are initialized before anything else
1310 # (per-architecture code is called in the same order that it is
1311 # registered). The ``correct fix'' is to have all the builtin types
1312 # made part of the architecture and initialize them on-demand (using
1313 # gdbarch_data) just like everything else. The catch is that other
1314 # modules still take the address of these builtin types forcing them
1315 # to be variables, sigh!
1317 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1318 # anchored on the first column and excludes the ``/'' character so
1319 # that it doesn't add the $(srcdir) prefix to any file that already
1320 # has an absolute path. It turns out that $(DEC)'s True64 make
1321 # automatically adds the $(srcdir) prefixes when it encounters files
1322 # in sub-directories such as cli/ and mi/.
1324 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1325 # duplicates. Files in the gdb/ directory can end up appearing in
1326 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1328 INIT_FILES
= $(COMMON_OBS
) $(TSOBS
) $(CONFIG_SRCS
) $(SUBDIR_GCC_COMPILE_SRCS
)
1329 init.c
: $(INIT_FILES
)
1331 @
rm -f init.c-tmp init.l-tmp
1333 @echo gdbtypes
> init.l-tmp
1334 @
-LANG
=C
; export LANG
; \
1335 LC_ALL
=C
; export LC_ALL
; \
1336 echo
$(INIT_FILES
) | \
1339 -e
'/^gdbtypes.[co]$$/d' \
1340 -e
'/^init.[co]$$/d' \
1341 -e
'/xdr_ld.[co]$$/d' \
1342 -e
'/xdr_ptrace.[co]$$/d' \
1343 -e
'/xdr_rdb.[co]$$/d' \
1344 -e
'/udr.[co]$$/d' \
1345 -e
'/udip2soc.[co]$$/d' \
1346 -e
'/udi2go32.[co]$$/d' \
1347 -e
'/version.[co]$$/d' \
1348 -e
'/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1349 -e
'/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1350 -e
's/\.[co]$$/.c/' \
1351 -e
's,signals\.c,common/signals\.c,' \
1352 -e
's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
1354 sed
-n
-e
's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev
/null
; \
1359 * ) echo
$$f ; fs
="$$fs $$f";; \
1362 @echo
'/* Do not modify this file. */' >>init.c-tmp
1363 @echo
'/* It is created automatically by the Makefile. */'>>init.c-tmp
1364 @echo
'#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
1365 @echo
'extern void initialize_all_files(void);' >>init.c-tmp
1366 @sed
-e
's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp
>>init.c-tmp
1367 @echo
'void' >>init.c-tmp
1368 @echo
'initialize_all_files (void)' >>init.c-tmp
1369 @echo
'{' >>init.c-tmp
1370 @sed
-e
's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp
>>init.c-tmp
1371 @echo
'}' >>init.c-tmp
1373 @mv init.c-tmp init.c
1377 # Create a library of the gdb object files and build GDB by linking
1380 # init.o is very important. It pulls in the rest of GDB.
1381 LIBGDB_OBS
= $(COMMON_OBS
) $(TSOBS
) $(ADD_FILES
) init.o
1382 libgdb.a
: $(LIBGDB_OBS
)
1384 $(AR
) q libgdb.a
$(LIBGDB_OBS
)
1387 # Removing the old gdb first works better if it is running, at least on SunOS.
1388 gdb
$(EXEEXT
): gdb.o
$(LIBGDB_OBS
) $(ADD_DEPS
) $(CDEPS
) $(TDEPLIBS
)
1390 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
1391 -o gdb
$(EXEEXT
) gdb.o
$(LIBGDB_OBS
) \
1392 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
1394 # Convenience rule to handle recursion.
1395 $(LIBGNU
) $(GNULIB_H
): all-lib
1396 all-lib
: $(GNULIB_BUILDDIR
)/Makefile
1397 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=$(GNULIB_BUILDDIR
) subdir_do
1400 # Convenience rule to handle recursion.
1401 .PHONY
: all-data-directory
1402 all-data-directory
: data-directory
/Makefile
1403 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=all DODIRS
=data-directory subdir_do
1405 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1406 # on itself without copying the executable. So "make gdb1" will make
1407 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1408 # Removing gdb1 before the copy is the right thing if gdb1 is open
1409 # in another process.
1410 gdb1
$(EXEEXT
): gdb
$(EXEEXT
)
1412 cp gdb
$(EXEEXT
) gdb1
$(EXEEXT
)
1414 # Put the proper machine-specific files first, so M-. on a machine
1415 # specific routine gets the one for the correct machine. (FIXME: those
1416 # files go in twice; we should be removing them from the main list).
1418 # TAGS depends on all the files that go into it so you can rebuild TAGS
1419 # with `make TAGS' and not have to say `rm TAGS' first.
1421 GDB_NM_FILE
= @GDB_NM_FILE@
1422 TAGS
: $(TAGFILES_NO_SRCDIR
) $(TAGFILES_WITH_SRCDIR
)
1424 etags
`(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1425 `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1426 echo $(srcdir)/$$i ; \
1427 done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1429 done) | sed -e 's/\.o$$/\.c/'` \
1430 `find $(srcdir)/config -name '*.h' -print`
1434 clean mostlyclean: $(CONFIG_CLEAN
)
1435 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(CLEANDIRS)" subdir_do
1436 rm -f
*.o
*.a
$(ADD_FILES
) *~ init.c-tmp init.l-tmp version.c-tmp
1437 rm -f init.c version.c observer.h observer.inc
1438 rm -f gdb
$(EXEEXT
) core make.log
1439 rm -f gdb
[0-9]$(EXEEXT
)
1440 rm -f test-cp-name-parser
$(EXEEXT
)
1441 rm -f xml-builtin.c stamp-xml
1444 # This used to depend on c-exp.c m2-exp.c TAGS
1445 # I believe this is wrong; the makefile standards for distclean just
1446 # describe removing files; the only sort of "re-create a distribution"
1447 # functionality described is if the distributed files are unmodified.
1448 # NB: While GDBSERVER might be configured on native systems, it isn't
1449 # always included in SUBDIRS. Remove the gdbserver files explicitly.
1451 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1452 rm -rf
$(GNULIB_BUILDDIR
)
1453 rm -f gdbserver
/config.status gdbserver
/config.log
1454 rm -f gdbserver
/tm.h gdbserver
/xm.h gdbserver
/nm.h
1455 rm -f gdbserver
/Makefile gdbserver
/config.cache
1456 rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
1457 rm -f y.output
yacc.acts
yacc.tmp y.tab.h
1458 rm -f config.log config.cache
1462 maintainer-clean
: local-maintainer-clean do-maintainer-clean
distclean
1463 realclean: maintainer-clean
1465 local-maintainer-clean
:
1466 @echo
"This command is intended for maintainers to use;"
1467 @echo
"it deletes files that may require special tools to rebuild."
1470 ada-lex.c ada-exp.c \
1472 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1473 rm -f TAGS
$(INFOFILES
)
1475 rm -f nm.h config.status
1477 do-maintainer-clean
:
1478 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=maintainer-clean
"DODIRS=$(CLEANDIRS)" \
1481 diststuff
: $(DISTSTUFF
) $(PACKAGE
).pot
$(CATALOGS
)
1482 cd doc
; $(MAKE
) $(MFLAGS
) diststuff
1485 @for i in
$(DODIRS
); do \
1487 $(REQUIRED_SUBDIRS
)) \
1488 if
[ ! -f .
/$$i/Makefile
] ; then \
1489 echo
"Missing $$i/Makefile" >&2 ; \
1493 if
[ -f .
/$$i/Makefile
] ; then \
1495 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
1496 else exit
1 ; fi
; \
1500 Makefile
: Makefile.in config.status @frags@
1501 # Regenerate the Makefile and the tm.h / nm.h links.
1502 CONFIG_FILES
="Makefile" \
1505 $(SHELL
) config.status
1507 $(GNULIB_BUILDDIR
)/Makefile
: gnulib
/Makefile.in config.status @frags@
1508 @cd
$(GNULIB_BUILDDIR
); CONFIG_FILES
="Makefile" \
1509 CONFIG_COMMANDS
="depfiles" \
1512 $(SHELL
) config.status
1514 data-directory
/Makefile
: data-directory
/Makefile.in config.status @frags@
1515 CONFIG_FILES
="data-directory/Makefile" \
1516 CONFIG_COMMANDS
="depfiles" \
1519 $(SHELL
) config.status
1523 .
/gdb
$(EXEEXT
) --data-directory
=`pwd`/data-directory
$(GDBFLAGS
)
1525 jit-reader.h
: $(srcdir)/jit-reader.in
1526 $(SHELL
) config.status
$@
1528 gcore
: $(srcdir)/gcore.in
1529 $(SHELL
) config.status
$@
1531 config.h
: stamp-h
; @true
1532 stamp-h
: $(srcdir)/config.in config.status
1533 CONFIG_HEADERS
=config.h
:config.in \
1534 CONFIG_COMMANDS
="default depdir" \
1537 $(SHELL
) config.status
1539 config.status
: $(srcdir)/configure configure.tgt configure.host ..
/bfd
/development.sh
1540 $(SHELL
) config.status
--recheck
1543 ACLOCAL_AMFLAGS
= -I ..
/config
1545 # Keep these in sync with the includes in acinclude.m4.
1548 acx_configure_dir.m4 \
1552 ..
/config
/acinclude.m4 \
1553 ..
/config
/plugins.m4 \
1554 ..
/config
/lead-dot.m4 \
1555 ..
/config
/override.m4 \
1556 ..
/config
/largefile.m4 \
1557 ..
/config
/gettext-sister.m4 \
1558 ..
/config
/lib-ld.m4 \
1559 ..
/config
/lib-prefix.m4 \
1560 ..
/config
/lib-link.m4 \
1563 ..
/config
/depstand.m4 \
1564 ..
/config
/lcmessage.m4 \
1565 ..
/config
/codeset.m4 \
1568 $(srcdir)/aclocal.m4
: @MAINTAINER_MODE_TRUE@
$(aclocal_m4_deps
)
1569 cd
$(srcdir) && $(ACLOCAL
) $(ACLOCAL_AMFLAGS
)
1572 configure_deps
= $(srcdir)/configure.ac
$(srcdir)/aclocal.m4
1573 $(srcdir)/configure
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1574 cd
$(srcdir) && $(AUTOCONF
)
1576 AUTOHEADER
= autoheader
1577 $(srcdir)/config.in
: @MAINTAINER_MODE_TRUE@
$(configure_deps
)
1578 cd
$(srcdir) && $(AUTOHEADER
)
1582 # automatic rebuilding in automake-generated Makefiles requires
1583 # this rule in the toplevel Makefile, which, with GNU make, causes
1584 # the desired updates through the implicit regeneration of the Makefile
1585 # and all of its prerequisites.
1592 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1594 cd doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
)
1596 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1598 cd doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
)
1600 # GDB MANUAL: TeX dvi file
1602 cd doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
)
1604 # GDB MANUAL: info file
1606 cd doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
)
1608 # Make copying.c from COPYING
1609 $(srcdir)/copying.c
: @MAINTAINER_MODE_TRUE@
$(srcdir)/..
/COPYING3
$(srcdir)/copying.awk
1610 awk
-f
$(srcdir)/copying.awk \
1611 < $(srcdir)/..
/COPYING3
> $(srcdir)/copying.tmp
1612 mv
$(srcdir)/copying.tmp
$(srcdir)/copying.c
1614 version.c
: Makefile version.in
$(srcdir)/..
/bfd
/version.h
$(srcdir)/common
/create-version.sh
1615 $(SHELL
) $(srcdir)/common
/create-version.sh
$(srcdir) \
1616 $(host_alias
) $(target_alias
) version.c
1618 observer.h
: observer.sh doc
/observer.texi
1619 ${srcdir}/observer.sh h
${srcdir}/doc
/observer.texi observer.h
1621 observer.inc
: observer.sh doc
/observer.texi
1622 ${srcdir}/observer.sh inc
${srcdir}/doc
/observer.texi observer.inc
1625 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
1626 `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1628 gdb.cxref
: $(SFILES
)
1629 cxref
-I.
$(SFILES
) >gdb.cxref
1633 # GNU Make has an annoying habit of putting *all* the Makefile variables
1634 # into the environment, unless you include this target as a circumvention.
1635 # Rumor is that this will be fixed (and this target can be removed)
1639 # GNU Make 3.63 has a different problem: it keeps tacking command line
1640 # overrides onto the definition of $(MAKE). This variable setting
1645 aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
1646 aarch64-linux-nat.c \
1648 alphabsd-nat.c alpha-linux-nat.c \
1649 alpha-tdep.c alpha-mdebug-tdep.c \
1650 alpha-linux-tdep.c \
1651 alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1652 amd64-nat.c amd64-tdep.c \
1653 amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1654 amd64nbsd-nat.c amd64nbsd-tdep.c \
1655 amd64obsd-nat.c amd64obsd-tdep.c \
1656 amd64-darwin-tdep.c \
1657 amd64-dicos-tdep.c \
1658 amd64-linux-nat.c amd64-linux-tdep.c \
1660 arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1661 armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1663 bfin-linux-tdep.c bfin-tdep.c \
1664 bsd-uthread.c bsd-kvm.c \
1666 dcache.c dicos-tdep.c darwin-nat.c \
1673 go32-nat.c h8300-tdep.c \
1675 hppa-linux-tdep.c hppa-linux-nat.c \
1677 hppanbsd-nat.c hppanbsd-tdep.c \
1678 hppaobsd-nat.c hppaobsd-tdep.c \
1679 i386-tdep.c i386-linux-nat.c \
1680 i386v4-nat.c i386-cygwin-tdep.c \
1681 i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1682 i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1684 i386-darwin-tdep.c i386-darwin-nat.c \
1686 i386-linux-tdep.c x86-nat.c \
1687 i386-sol2-nat.c i386-sol2-tdep.c \
1688 i386gnu-nat.c i386gnu-tdep.c \
1689 ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
1691 ia64-libunwind-tdep.c \
1698 m32r-linux-nat.c m32r-linux-tdep.c \
1700 m68kbsd-nat.c m68kbsd-tdep.c \
1701 m68klinux-nat.c m68klinux-tdep.c \
1702 m88k-tdep.c m88kbsd-nat.c \
1703 microblaze-tdep.c microblaze-linux-tdep.c \
1704 mingw-hdep.c common
/mingw-strerror.c \
1705 mips-linux-nat.c mips-linux-tdep.c \
1708 mipsnbsd-nat.c mipsnbsd-tdep.c \
1709 mips64obsd-nat.c mips64obsd-tdep.c \
1711 nios2-tdep.c nios2-linux-tdep.c \
1712 nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
1713 posix-hdep.c common
/posix-strerror.c \
1714 ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
1715 ppcfbsd-nat.c ppcfbsd-tdep.c \
1716 ppcnbsd-nat.c ppcnbsd-tdep.c \
1717 ppcobsd-nat.c ppcobsd-tdep.c \
1719 ravenscar-thread.c \
1720 remote-m32r-sdi.c remote-mips.c \
1724 rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
1725 rs6000-lynx178-tdep.c \
1727 s390-linux-tdep.c s390-linux-nat.c \
1729 ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1730 sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1733 sparc-linux-nat.c sparc-linux-tdep.c \
1734 sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1735 sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1736 sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1737 sparc64nbsd-nat.c sparc64nbsd-tdep.c \
1738 sparc64obsd-nat.c sparc64obsd-tdep.c \
1739 sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1740 sparc-ravenscar-thread.c \
1741 spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1742 tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
1744 vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1745 windows-nat.c windows-tdep.c \
1748 xtensa-tdep.c xtensa-config.c \
1749 xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1751 # Some files need explicit build rules (due to -Werror problems) or due
1752 # to sub-directory fun 'n' games.
1754 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1755 # errors. It turns out that that is the least of monitor.c's
1756 # problems. The function print_vsprintf appears to be using
1757 # va_arg(long) to extract CORE_ADDR parameters - something that
1758 # definitly will not work. "monitor.c" needs to be rewritten so that
1759 # it doesn't use format strings and instead uses callbacks.
1760 monitor.o
: $(srcdir)/monitor.c
1761 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1762 $(COMPILE.post
) $(srcdir)/monitor.c
1765 # Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
1766 # checks format strings.
1767 printcmd.o
: $(srcdir)/printcmd.c
1768 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_FORMAT
) \
1769 $(COMPILE.post
) $(srcdir)/printcmd.c
1772 # ada-exp.c can appear in srcdir, for releases; or in ., for
1773 # development builds.
1774 ADA_EXP_C
= `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
1776 # Some versions of flex give output that triggers
1777 # -Wold-style-definition.
1778 ada-exp.o
: ada-exp.c
1779 $(COMPILE.pre
) $(INTERNAL_CFLAGS
) $(GDB_WARN_CFLAGS_NO_DEFS
) \
1780 $(COMPILE.post
) $(ADA_EXP_C
)
1783 # Message files. Based on code in gcc/Makefile.in.
1785 # Rules for generating translated message descriptions. Disabled by
1786 # autoconf if the tools are not available.
1788 .SUFFIXES
: .po .gmo .pox .pot
1789 .PHONY
: all-po install-po uninstall-po clean-po update-po
$(PACKAGE
).pot
1793 # This notation should be acceptable to all Make implementations used
1794 # by people who are interested in updating .po files.
1795 update-po
: $(CATALOGS
:.gmo
=.pox
)
1797 # N.B. We do not attempt to copy these into $(srcdir). The snapshot
1800 -test -d po || mkdir po
1801 $(GMSGFMT
) --statistics
-o
$@
$<
1803 # The new .po has to be gone over by hand, so we deposit it into
1804 # build/po with a different extension. If build/po/$(PACKAGE).pot
1805 # exists, use it (it was just created), else use the one in srcdir.
1807 -test -d po || mkdir po
1808 $(MSGMERGE
) $< `if test -f po/$(PACKAGE).pot; \
1809 then echo po/$(PACKAGE).pot; \
1810 else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o
$@
1812 # This rule has to look for .gmo modules in both srcdir and the cwd,
1813 # and has to check that we actually have a catalog for each language,
1814 # in case they weren't built or included with the distribution.
1816 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(datadir)
1817 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1818 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1819 if
[ -f
$$cat ]; then
:; \
1820 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1823 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1824 echo
$(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir; \
1825 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$$dir || exit
1; \
1826 echo
$(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1827 $(INSTALL_DATA
) $$cat $(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1830 cats
="$(CATALOGS)"; for cat in
$$cats; do \
1831 lang
=`basename $$cat | sed 's/\.gmo$$//'`; \
1832 if
[ -f
$$cat ]; then
:; \
1833 elif
[ -f
$(srcdir)/$$cat ]; then cat
=$(srcdir)/$$cat; \
1836 dir=$(localedir
)/$$lang/LC_MESSAGES
; \
1837 rm -f
$(DESTDIR
)$$dir/$(PACKAGE
).mo
; \
1839 # Delete po/*.gmo only if we are not building in the source directory.
1841 -if
[ ! -f Makefile.in
]; then
rm -f po
/*.gmo
; fi
1843 # Rule for regenerating the message template (gdb.pot). Instead of
1844 # forcing everyone to edit POTFILES.in, which proved impractical, this
1845 # rule has no dependencies and always regenerates gdb.pot. This is
1846 # relatively harmless since the .po files do not directly depend on
1847 # it. The .pot file is left in the build directory. Since GDB's
1848 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1849 # files) force this rule.
1850 $(PACKAGE
).pot
: po
/$(PACKAGE
).pot
1851 po
/$(PACKAGE
).pot
: force
1852 -test -d po || mkdir po
1853 sh
-e
$(srcdir)/po
/gdbtext
$(XGETTEXT
) $(PACKAGE
) .
$(srcdir)
1857 # YACC/LEX dependencies
1859 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1860 # exist in srcdir, then compiled in objdir to LANG-exp.o. If we
1861 # said LANG-exp.c rather than ./c-exp.c some makes would
1862 # sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
1863 # decls for malloc/realloc/free which conflict with everything else.
1864 # Strictly speaking c-exp.c should therefore depend on
1865 # Makefile.in, but that was a pretty big annoyance.
1870 $(SHELL
) $(YLWRAP
) $< y.tab.c
$@
-- $(YACC
) $(YFLAGS
) && mv
$@
$@.tmp \
1871 ||
(rm -f
$@
; false
)
1872 sed
-e
'/extern.*malloc/d' \
1873 -e
'/extern.*realloc/d' \
1874 -e
'/extern.*free/d' \
1875 -e
'/include.*malloc.h/d' \
1876 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1877 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1878 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1879 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1880 -e
'/^#line.*y.tab.c/d' \
1884 if
[ "$(FLEX)" ] && $(FLEX
) --version
>/dev
/null
2>&1; then \
1885 $(FLEX
) -o
$@
$< && \
1887 sed
-e
'/extern.*malloc/d' \
1888 -e
'/extern.*realloc/d' \
1889 -e
'/extern.*free/d' \
1890 -e
'/include.*malloc.h/d' \
1891 -e
's/\([^x]\)malloc/\1xmalloc/g' \
1892 -e
's/\([^x]\)realloc/\1xrealloc/g' \
1893 -e
's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1894 -e
's/\([ \t;,(]\)free$$/\1xfree/g' \
1895 -e
's/yy_flex_xrealloc/yyxrealloc/g' \
1899 elif
[ -f
$@
]; then \
1900 echo
"Warning: $*.c older than $*.l and flex not available."; \
1902 echo
"$@ missing and flex not available."; \
1906 .PRECIOUS
: ada-lex.c
1910 xml-builtin.c
: stamp-xml
; @true
1911 stamp-xml
: $(srcdir)/features
/feature_to_c.sh Makefile
$(XMLFILES
)
1912 rm -f xml-builtin.tmp
1914 $(SHELL
) $(srcdir)/features
/feature_to_c.sh \
1915 xml-builtin.tmp
$(XMLFILES
)
1916 $(SHELL
) $(srcdir)/..
/move-if-change xml-builtin.tmp xml-builtin.c
1917 echo stamp
> stamp-xml
1919 .PRECIOUS
: xml-builtin.c
1922 # gdb/cli/ dependencies
1924 # Need to explicitly specify the compile rule as make will do nothing
1925 # or try to compile the object file into the sub-directory.
1927 cli-cmds.o
: $(srcdir)/cli
/cli-cmds.c
1928 $(COMPILE
) $(srcdir)/cli
/cli-cmds.c
1931 cli-decode.o
: $(srcdir)/cli
/cli-decode.c
1932 $(COMPILE
) $(srcdir)/cli
/cli-decode.c
1935 cli-dump.o
: $(srcdir)/cli
/cli-dump.c
1936 $(COMPILE
) $(srcdir)/cli
/cli-dump.c
1939 cli-interp.o
: $(srcdir)/cli
/cli-interp.c
1940 $(COMPILE
) $(srcdir)/cli
/cli-interp.c
1943 cli-logging.o
: $(srcdir)/cli
/cli-logging.c
1944 $(COMPILE
) $(srcdir)/cli
/cli-logging.c
1947 cli-script.o
: $(srcdir)/cli
/cli-script.c
1948 $(COMPILE
) $(srcdir)/cli
/cli-script.c
1951 cli-setshow.o
: $(srcdir)/cli
/cli-setshow.c
1952 $(COMPILE
) $(srcdir)/cli
/cli-setshow.c
1955 cli-utils.o
: $(srcdir)/cli
/cli-utils.c
1956 $(COMPILE
) $(srcdir)/cli
/cli-utils.c
1959 # GCC Compile support dependencies
1961 # Need to explicitly specify the compile rule as make will do nothing
1962 # or try to compile the object file into the sub-directory.
1964 compile.o
: $(srcdir)/compile
/compile.c
1965 $(COMPILE
) $(srcdir)/compile
/compile.c
1968 compile-c-types.o
: $(srcdir)/compile
/compile-c-types.c
1969 $(COMPILE
) $(srcdir)/compile
/compile-c-types.c
1972 compile-c-symbols.o
: $(srcdir)/compile
/compile-c-symbols.c
1973 $(COMPILE
) $(srcdir)/compile
/compile-c-symbols.c
1976 compile-object-load.o
: $(srcdir)/compile
/compile-object-load.c
1977 $(COMPILE
) $(srcdir)/compile
/compile-object-load.c
1980 compile-object-run.o
: $(srcdir)/compile
/compile-object-run.c
1981 $(COMPILE
) $(srcdir)/compile
/compile-object-run.c
1984 compile-loc2c.o
: $(srcdir)/compile
/compile-loc2c.c
1985 $(COMPILE
) $(srcdir)/compile
/compile-loc2c.c
1988 compile-c-support.o
: $(srcdir)/compile
/compile-c-support.c
1989 $(COMPILE
) $(srcdir)/compile
/compile-c-support.c
1994 # GDBTK sub-directory
1996 # Need to explicitly specify the compile rule as make will do nothing
1997 # or try to compile the object file into the mi directory.
1999 all-gdbtk
: insight
$(EXEEXT
)
2002 transformed_name
=`t='$(program_transform_name)'; \
2003 echo insight | sed -e $$t` ; \
2004 if
test "x$$transformed_name" = x
; then \
2005 transformed_name
=insight
; \
2009 $(SHELL
) $(srcdir)/..
/mkinstalldirs
$(DESTDIR
)$(bindir); \
2010 $(INSTALL_PROGRAM
) insight
$(EXEEXT
) \
2011 $(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2012 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2013 $(DESTDIR
)$(GDBTK_LIBRARY
) ; \
2014 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2015 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
) ; \
2016 $(INSTALL_DATA
) $(srcdir)/gdbtk
/plugins
/plugins.tcl \
2017 $(DESTDIR
)$(libdir)/insight
$(GDBTK_VERSION
)/plugins.tcl
; \
2018 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2019 $(DESTDIR
)$(GDBTK_LIBRARY
)/images \
2020 $(DESTDIR
)$(GDBTK_LIBRARY
)/images2
; \
2021 $(SHELL
) $(srcdir)/..
/mkinstalldirs \
2022 $(DESTDIR
)$(GDBTK_LIBRARY
)/help \
2023 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/images \
2024 $(DESTDIR
)$(GDBTK_LIBRARY
)/help
/trace
; \
2025 cd
$(srcdir)/gdbtk
/library
; \
2026 for i in
*.tcl
*.itcl
*.ith
*.itb images
/*.gif images2
/*.gif images
/icons.txt images2
/icons.txt tclIndex help
/*.html help
/trace
/*.html help
/trace
/index.toc help
/images
/*.gif help
/images
/*.png
; \
2028 $(INSTALL_DATA
) $$i $(DESTDIR
)$(GDBTK_LIBRARY
)/$$i ; \
2032 transformed_name
=`t='$(program_transform_name)'; \
2033 echo insight | sed -e $$t` ; \
2034 if
test "x$$transformed_name" = x
; then \
2035 transformed_name
=insight
; \
2039 rm -f
$(DESTDIR
)$(bindir)/$$transformed_name$(EXEEXT
) ; \
2040 rm -rf
$(DESTDIR
)$(GDBTK_LIBRARY
)
2043 rm -f insight
$(EXEEXT
)
2045 # Removing the old gdb first works better if it is running, at least on SunOS.
2046 insight
$(EXEEXT
): gdbtk-main.o libgdb.a
$(ADD_DEPS
) \
2047 $(CDEPS
) $(TDEPLIBS
)
2048 rm -f insight
$(EXEEXT
)
2049 $(CC_LD
) $(INTERNAL_LDFLAGS
) $(WIN32LDAPP
) \
2050 -o insight
$(EXEEXT
) gdbtk-main.o libgdb.a \
2051 $(TDEPLIBS
) $(TUI_LIBRARY
) $(CLIBS
) $(LOADLIBES
)
2053 gdbres.o
: $(srcdir)/gdbtk
/gdb.rc
$(srcdir)/gdbtk
/gdbtool.ico
2054 $(WINDRES
) --include $(srcdir)/gdbtk
$(srcdir)/gdbtk
/gdb.rc gdbres.o
2056 all_gdbtk_cflags
= $(IDE_CFLAGS
) $(ITCL_CFLAGS
) \
2057 $(ITK_CFLAGS
) $(TCL_CFLAGS
) $(TK_CFLAGS
) $(X11_CFLAGS
) \
2059 -DGDBTK_LIBRARY
=\"$(GDBTK_LIBRARY
)\" \
2060 -DSRC_DIR
=\"$(GDBTK_SRC_DIR
)\"
2062 gdbtk.o
: $(srcdir)/gdbtk
/generic
/gdbtk.c
2063 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk.c
2066 gdbtk-bp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2067 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-bp.c
2070 gdbtk-cmds.o
: $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2071 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-cmds.c
2074 gdbtk-hooks.o
: $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2075 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-hooks.c
2078 gdbtk-interp.o
: $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2079 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-interp.c
2082 gdbtk-main.o
: $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2083 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-main.c
2086 gdbtk-register.o
: $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2087 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-register.c
2090 gdbtk-stack.o
: $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2091 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-stack.c
2094 gdbtk-varobj.o
: $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2095 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-varobj.c
2098 gdbtk-wrapper.o
: $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2099 $(COMPILE
) $(all_gdbtk_cflags
) $(srcdir)/gdbtk
/generic
/gdbtk-wrapper.c
2104 # gdb/mi/ dependencies
2106 # Need to explicitly specify the compile rule as make will do nothing
2107 # or try to compile the object file into the sub-directory.
2109 mi-cmd-break.o
: $(srcdir)/mi
/mi-cmd-break.c
2110 $(COMPILE
) $(srcdir)/mi
/mi-cmd-break.c
2113 mi-cmd-catch.o
: $(srcdir)/mi
/mi-cmd-catch.c
2114 $(COMPILE
) $(srcdir)/mi
/mi-cmd-catch.c
2117 mi-cmd-disas.o
: $(srcdir)/mi
/mi-cmd-disas.c
2118 $(COMPILE
) $(srcdir)/mi
/mi-cmd-disas.c
2121 mi-cmd-env.o
: $(srcdir)/mi
/mi-cmd-env.c
2122 $(COMPILE
) $(srcdir)/mi
/mi-cmd-env.c
2125 mi-cmd-file.o
: $(srcdir)/mi
/mi-cmd-file.c
2126 $(COMPILE
) $(srcdir)/mi
/mi-cmd-file.c
2129 mi-cmd-info.o
: $(srcdir)/mi
/mi-cmd-info.c
2130 $(COMPILE
) $(srcdir)/mi
/mi-cmd-info.c
2133 mi-cmds.o
: $(srcdir)/mi
/mi-cmds.c
2134 $(COMPILE
) $(srcdir)/mi
/mi-cmds.c
2137 mi-cmd-stack.o
: $(srcdir)/mi
/mi-cmd-stack.c
2138 $(COMPILE
) $(srcdir)/mi
/mi-cmd-stack.c
2141 mi-cmd-target.o
: $(srcdir)/mi
/mi-cmd-target.c
2142 $(COMPILE
) $(srcdir)/mi
/mi-cmd-target.c
2145 mi-cmd-var.o
: $(srcdir)/mi
/mi-cmd-var.c
2146 $(COMPILE
) $(srcdir)/mi
/mi-cmd-var.c
2149 mi-console.o
: $(srcdir)/mi
/mi-console.c
2150 $(COMPILE
) $(srcdir)/mi
/mi-console.c
2153 mi-getopt.o
: $(srcdir)/mi
/mi-getopt.c
2154 $(COMPILE
) $(srcdir)/mi
/mi-getopt.c
2157 mi-interp.o
: $(srcdir)/mi
/mi-interp.c
2158 $(COMPILE
) $(srcdir)/mi
/mi-interp.c
2161 mi-main.o
: $(srcdir)/mi
/mi-main.c
2162 $(COMPILE
) $(srcdir)/mi
/mi-main.c
2165 mi-out.o
: $(srcdir)/mi
/mi-out.c
2166 $(COMPILE
) $(srcdir)/mi
/mi-out.c
2169 mi-parse.o
: $(srcdir)/mi
/mi-parse.c
2170 $(COMPILE
) $(srcdir)/mi
/mi-parse.c
2173 mi-symbol-cmds.o
: $(srcdir)/mi
/mi-symbol-cmds.c
2174 $(COMPILE
) $(srcdir)/mi
/mi-symbol-cmds.c
2177 mi-common.o
: $(srcdir)/mi
/mi-common.c
2178 $(COMPILE
) $(srcdir)/mi
/mi-common.c
2181 # gdb/common/ dependencies
2183 # Need to explicitly specify the compile rule as make will do nothing
2184 # or try to compile the object file into the sub-directory.
2186 signals.o
: $(srcdir)/common
/signals.c
2187 $(COMPILE
) $(srcdir)/common
/signals.c
2190 common-utils.o
: ${srcdir}/common
/common-utils.c
2191 $(COMPILE
) $(srcdir)/common
/common-utils.c
2194 gdb_vecs.o
: ${srcdir}/common
/gdb_vecs.c
2195 $(COMPILE
) $(srcdir)/common
/gdb_vecs.c
2198 xml-utils.o
: ${srcdir}/common
/xml-utils.c
2199 $(COMPILE
) $(srcdir)/common
/xml-utils.c
2202 ptid.o
: ${srcdir}/common
/ptid.c
2203 $(COMPILE
) $(srcdir)/common
/ptid.c
2206 buffer.o
: ${srcdir}/common
/buffer.c
2207 $(COMPILE
) $(srcdir)/common
/buffer.c
2210 filestuff.o
: $(srcdir)/common
/filestuff.c
2211 $(COMPILE
) $(srcdir)/common
/filestuff.c
2214 format.o
: ${srcdir}/common
/format.c
2215 $(COMPILE
) $(srcdir)/common
/format.c
2218 common-agent.o
: $(srcdir)/common
/agent.c
2219 $(COMPILE
) $(srcdir)/common
/agent.c
2222 vec.o
: ${srcdir}/common
/vec.c
2223 $(COMPILE
) $(srcdir)/common
/vec.c
2226 print-utils.o
: ${srcdir}/common
/print-utils.c
2227 $(COMPILE
) $(srcdir)/common
/print-utils.c
2230 rsp-low.o
: ${srcdir}/common
/rsp-low.c
2231 $(COMPILE
) $(srcdir)/common
/rsp-low.c
2234 errors.o
: ${srcdir}/common
/errors.c
2235 $(COMPILE
) $(srcdir)/common
/errors.c
2238 common-debug.o
: ${srcdir}/common
/common-debug.c
2239 $(COMPILE
) $(srcdir)/common
/common-debug.c
2242 cleanups.o
: ${srcdir}/common
/cleanups.c
2243 $(COMPILE
) $(srcdir)/common
/cleanups.c
2246 common-exceptions.o
: ${srcdir}/common
/common-exceptions.c
2247 $(COMPILE
) $(srcdir)/common
/common-exceptions.c
2250 posix-strerror.o
: ${srcdir}/common
/posix-strerror.c
2251 $(COMPILE
) $(srcdir)/common
/posix-strerror.c
2254 mingw-strerror.o
: ${srcdir}/common
/mingw-strerror.c
2255 $(COMPILE
) $(srcdir)/common
/mingw-strerror.c
2258 btrace-common.o
: ${srcdir}/common
/btrace-common.c
2259 $(COMPILE
) $(srcdir)/common
/btrace-common.c
2262 fileio.o
: ${srcdir}/common
/fileio.c
2263 $(COMPILE
) $(srcdir)/common
/fileio.c
2266 # gdb/target/ dependencies
2268 # Need to explicitly specify the compile rule as make will do nothing
2269 # or try to compile the object file into the sub-directory.
2271 waitstatus.o
: ${srcdir}/target
/waitstatus.c
2272 $(COMPILE
) $(srcdir)/target
/waitstatus.c
2275 # gdb/nat/ dependencies
2277 # Need to explicitly specify the compile rule as make will do nothing
2278 # or try to compile the object file into the sub-directory.
2280 x86-dregs.o
: ${srcdir}/nat
/x86-dregs.c
2281 $(COMPILE
) $(srcdir)/nat
/x86-dregs.c
2284 linux-btrace.o
: ${srcdir}/nat
/linux-btrace.c
2285 $(COMPILE
) $(srcdir)/nat
/linux-btrace.c
2288 linux-osdata.o
: ${srcdir}/nat
/linux-osdata.c
2289 $(COMPILE
) $(srcdir)/nat
/linux-osdata.c
2292 linux-procfs.o
: $(srcdir)/nat
/linux-procfs.c
2293 $(COMPILE
) $(srcdir)/nat
/linux-procfs.c
2296 linux-ptrace.o
: $(srcdir)/nat
/linux-ptrace.c
2297 $(COMPILE
) $(srcdir)/nat
/linux-ptrace.c
2300 linux-waitpid.o
: ${srcdir}/nat
/linux-waitpid.c
2301 $(COMPILE
) $(srcdir)/nat
/linux-waitpid.c
2304 mips-linux-watch.o
: ${srcdir}/nat
/mips-linux-watch.c
2305 $(COMPILE
) $(srcdir)/nat
/mips-linux-watch.c
2308 ppc-linux.o
: ${srcdir}/nat
/ppc-linux.c
2309 $(COMPILE
) $(srcdir)/nat
/ppc-linux.c
2312 linux-personality.o
: ${srcdir}/nat
/linux-personality.c
2313 $(COMPILE
) $(srcdir)/nat
/linux-personality.c
2316 x86-linux.o
: ${srcdir}/nat
/x86-linux.c
2317 $(COMPILE
) $(srcdir)/nat
/x86-linux.c
2320 x86-linux-dregs.o
: ${srcdir}/nat
/x86-linux-dregs.c
2321 $(COMPILE
) $(srcdir)/nat
/x86-linux-dregs.c
2324 linux-namespaces.o
: ${srcdir}/nat
/linux-namespaces.c
2325 $(COMPILE
) $(srcdir)/nat
/linux-namespaces.c
2328 aarch64-linux-hw-point.o
: ${srcdir}/nat
/aarch64-linux-hw-point.c
2329 $(COMPILE
) $(srcdir)/nat
/aarch64-linux-hw-point.c
2333 # gdb/tui/ dependencies
2335 # Need to explicitly specify the compile rule as make will do nothing
2336 # or try to compile the object file into the sub-directory.
2338 tui.o
: $(srcdir)/tui
/tui.c
2339 $(COMPILE
) $(srcdir)/tui
/tui.c
2342 tui-command.o
: $(srcdir)/tui
/tui-command.c
2343 $(COMPILE
) $(srcdir)/tui
/tui-command.c
2346 tui-data.o
: $(srcdir)/tui
/tui-data.c
2347 $(COMPILE
) $(srcdir)/tui
/tui-data.c
2350 tui-disasm.o
: $(srcdir)/tui
/tui-disasm.c
2351 $(COMPILE
) $(srcdir)/tui
/tui-disasm.c
2354 tui-file.o
: $(srcdir)/tui
/tui-file.c
2355 $(COMPILE
) $(srcdir)/tui
/tui-file.c
2358 tui-hooks.o
: $(srcdir)/tui
/tui-hooks.c
2359 $(COMPILE
) $(srcdir)/tui
/tui-hooks.c
2362 tui-interp.o
: $(srcdir)/tui
/tui-interp.c
2363 $(COMPILE
) $(srcdir)/tui
/tui-interp.c
2366 tui-io.o
: $(srcdir)/tui
/tui-io.c
2367 $(COMPILE
) $(srcdir)/tui
/tui-io.c
2370 tui-layout.o
: $(srcdir)/tui
/tui-layout.c
2371 $(COMPILE
) $(srcdir)/tui
/tui-layout.c
2374 tui-out.o
: $(srcdir)/tui
/tui-out.c
2375 $(COMPILE
) $(srcdir)/tui
/tui-out.c
2378 tui-regs.o
: $(srcdir)/tui
/tui-regs.c
2379 $(COMPILE
) $(srcdir)/tui
/tui-regs.c
2382 tui-source.o
: $(srcdir)/tui
/tui-source.c
2383 $(COMPILE
) $(srcdir)/tui
/tui-source.c
2386 tui-stack.o
: $(srcdir)/tui
/tui-stack.c
2387 $(COMPILE
) $(srcdir)/tui
/tui-stack.c
2390 tui-win.o
: $(srcdir)/tui
/tui-win.c
2391 $(COMPILE
) $(srcdir)/tui
/tui-win.c
2394 tui-windata.o
: $(srcdir)/tui
/tui-windata.c
2395 $(COMPILE
) $(srcdir)/tui
/tui-windata.c
2398 tui-wingeneral.o
: $(srcdir)/tui
/tui-wingeneral.c
2399 $(COMPILE
) $(srcdir)/tui
/tui-wingeneral.c
2402 tui-winsource.o
: $(srcdir)/tui
/tui-winsource.c
2403 $(COMPILE
) $(srcdir)/tui
/tui-winsource.c
2406 # gdb/guile dependencies
2408 # Need to explicitly specify the compile rule as make will do nothing
2409 # or try to compile the object file into the sub-directory.
2411 guile.o
: $(srcdir)/guile
/guile.c
2412 $(COMPILE
) $(srcdir)/guile
/guile.c
2415 scm-arch.o
: $(srcdir)/guile
/scm-arch.c
2416 $(COMPILE
) $(srcdir)/guile
/scm-arch.c
2419 scm-auto-load.o
: $(srcdir)/guile
/scm-auto-load.c
2420 $(COMPILE
) $(srcdir)/guile
/scm-auto-load.c
2423 scm-block.o
: $(srcdir)/guile
/scm-block.c
2424 $(COMPILE
) $(srcdir)/guile
/scm-block.c
2427 scm-breakpoint.o
: $(srcdir)/guile
/scm-breakpoint.c
2428 $(COMPILE
) $(srcdir)/guile
/scm-breakpoint.c
2431 scm-cmd.o
: $(srcdir)/guile
/scm-cmd.c
2432 $(COMPILE
) $(srcdir)/guile
/scm-cmd.c
2435 scm-disasm.o
: $(srcdir)/guile
/scm-disasm.c
2436 $(COMPILE
) $(srcdir)/guile
/scm-disasm.c
2439 scm-exception.o
: $(srcdir)/guile
/scm-exception.c
2440 $(COMPILE
) $(srcdir)/guile
/scm-exception.c
2443 scm-frame.o
: $(srcdir)/guile
/scm-frame.c
2444 $(COMPILE
) $(srcdir)/guile
/scm-frame.c
2447 scm-gsmob.o
: $(srcdir)/guile
/scm-gsmob.c
2448 $(COMPILE
) $(srcdir)/guile
/scm-gsmob.c
2451 scm-iterator.o
: $(srcdir)/guile
/scm-iterator.c
2452 $(COMPILE
) $(srcdir)/guile
/scm-iterator.c
2455 scm-lazy-string.o
: $(srcdir)/guile
/scm-lazy-string.c
2456 $(COMPILE
) $(srcdir)/guile
/scm-lazy-string.c
2459 scm-math.o
: $(srcdir)/guile
/scm-math.c
2460 $(COMPILE
) $(srcdir)/guile
/scm-math.c
2463 scm-objfile.o
: $(srcdir)/guile
/scm-objfile.c
2464 $(COMPILE
) $(srcdir)/guile
/scm-objfile.c
2467 scm-param.o
: $(srcdir)/guile
/scm-param.c
2468 $(COMPILE
) $(srcdir)/guile
/scm-param.c
2471 scm-ports.o
: $(srcdir)/guile
/scm-ports.c
2472 $(COMPILE
) $(srcdir)/guile
/scm-ports.c
2475 scm-pretty-print.o
: $(srcdir)/guile
/scm-pretty-print.c
2476 $(COMPILE
) $(srcdir)/guile
/scm-pretty-print.c
2479 scm-progspace.o
: $(srcdir)/guile
/scm-progspace.c
2480 $(COMPILE
) $(srcdir)/guile
/scm-progspace.c
2483 scm-safe-call.o
: $(srcdir)/guile
/scm-safe-call.c
2484 $(COMPILE
) $(srcdir)/guile
/scm-safe-call.c
2487 scm-string.o
: $(srcdir)/guile
/scm-string.c
2488 $(COMPILE
) $(srcdir)/guile
/scm-string.c
2491 scm-symbol.o
: $(srcdir)/guile
/scm-symbol.c
2492 $(COMPILE
) $(srcdir)/guile
/scm-symbol.c
2495 scm-symtab.o
: $(srcdir)/guile
/scm-symtab.c
2496 $(COMPILE
) $(srcdir)/guile
/scm-symtab.c
2499 scm-type.o
: $(srcdir)/guile
/scm-type.c
2500 $(COMPILE
) $(srcdir)/guile
/scm-type.c
2503 scm-utils.o
: $(srcdir)/guile
/scm-utils.c
2504 $(COMPILE
) $(srcdir)/guile
/scm-utils.c
2507 scm-value.o
: $(srcdir)/guile
/scm-value.c
2508 $(COMPILE
) $(srcdir)/guile
/scm-value.c
2511 # gdb/python/ dependencies
2513 # Need to explicitly specify the compile rule as make will do nothing
2514 # or try to compile the object file into the sub-directory.
2516 # Flags needed to compile Python code
2517 PYTHON_CFLAGS
=@PYTHON_CFLAGS@
2519 python.o
: $(srcdir)/python
/python.c
2520 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/python.c
2523 py-arch.o
: $(srcdir)/python
/py-arch.c
2524 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-arch.c
2527 py-auto-load.o
: $(srcdir)/python
/py-auto-load.c
2528 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-auto-load.c
2531 py-block.o
: $(srcdir)/python
/py-block.c
2532 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-block.c
2535 py-bpevent.o
: $(srcdir)/python
/py-bpevent.c
2536 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-bpevent.c
2539 py-breakpoint.o
: $(srcdir)/python
/py-breakpoint.c
2540 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-breakpoint.c
2543 py-cmd.o
: $(srcdir)/python
/py-cmd.c
2544 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-cmd.c
2547 py-continueevent.o
: $(srcdir)/python
/py-continueevent.c
2548 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-continueevent.c
2551 py-xmethods.o
: $(srcdir)/python
/py-xmethods.c
2552 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-xmethods.c
2555 py-event.o
: $(srcdir)/python
/py-event.c
2556 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-event.c
2559 py-evtregistry.o
: $(srcdir)/python
/py-evtregistry.c
2560 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evtregistry.c
2563 py-evts.o
: $(srcdir)/python
/py-evts.c
2564 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-evts.c
2567 py-exitedevent.o
: $(srcdir)/python
/py-exitedevent.c
2568 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-exitedevent.c
2571 py-finishbreakpoint.o
: $(srcdir)/python
/py-finishbreakpoint.c
2572 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-finishbreakpoint.c
2575 py-frame.o
: $(srcdir)/python
/py-frame.c
2576 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-frame.c
2579 py-framefilter.o
: $(srcdir)/python
/py-framefilter.c
2580 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-framefilter.c
2583 py-function.o
: $(srcdir)/python
/py-function.c
2584 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-function.c
2587 py-gdb-readline.o
: $(srcdir)/python
/py-gdb-readline.c
2588 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-gdb-readline.c
2591 py-inferior.o
: $(srcdir)/python
/py-inferior.c
2592 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-inferior.c
2595 py-infevents.o
: $(srcdir)/python
/py-infevents.c
2596 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infevents.c
2599 py-infthread.o
: $(srcdir)/python
/py-infthread.c
2600 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-infthread.c
2603 py-lazy-string.o
: $(srcdir)/python
/py-lazy-string.c
2604 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-lazy-string.c
2607 py-linetable.o
: $(srcdir)/python
/py-linetable.c
2608 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-linetable.c
2611 py-newobjfileevent.o
: $(srcdir)/python
/py-newobjfileevent.c
2612 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-newobjfileevent.c
2615 py-objfile.o
: $(srcdir)/python
/py-objfile.c
2616 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-objfile.c
2619 py-param.o
: $(srcdir)/python
/py-param.c
2620 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-param.c
2623 py-prettyprint.o
: $(srcdir)/python
/py-prettyprint.c
2624 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-prettyprint.c
2627 py-progspace.o
: $(srcdir)/python
/py-progspace.c
2628 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-progspace.c
2631 py-signalevent.o
: $(srcdir)/python
/py-signalevent.c
2632 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-signalevent.c
2635 py-stopevent.o
: $(srcdir)/python
/py-stopevent.c
2636 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-stopevent.c
2639 py-symbol.o
: $(srcdir)/python
/py-symbol.c
2640 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symbol.c
2643 py-symtab.o
: $(srcdir)/python
/py-symtab.c
2644 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-symtab.c
2647 py-threadevent.o
: $(srcdir)/python
/py-threadevent.c
2648 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-threadevent.c
2651 py-type.o
: $(srcdir)/python
/py-type.c
2652 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-type.c
2655 py-unwind.o
: $(srcdir)/python
/py-unwind.c
2656 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-unwind.c
2659 py-utils.o
: $(srcdir)/python
/py-utils.c
2660 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-utils.c
2663 py-value.o
: $(srcdir)/python
/py-value.c
2664 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-value.c
2667 py-varobj.o
: $(srcdir)/python
/py-varobj.c
2668 $(COMPILE
) $(PYTHON_CFLAGS
) $(srcdir)/python
/py-varobj.c
2672 # Dependency tracking. Most of this is conditional on GNU Make being
2673 # found by configure; if GNU Make is not found, we fall back to a
2677 @GMAKE_TRUE@
ifeq ($(DEPMODE
),depmode
=gcc3
)
2678 # Note that we put the dependencies into a .Tpo file, then move them
2679 # into place if the compile succeeds. We need this because gcc does
2680 # not atomically write the dependency output file.
2681 @GMAKE_TRUE@
override COMPILE.post
= -c
-o
$@
-MT
$@
-MMD
-MP \
2682 @GMAKE_TRUE@
-MF
$(DEPDIR
)/$(basename $(@F
)).Tpo
2683 @GMAKE_TRUE@
override POSTCOMPILE
= @mv
$(DEPDIR
)/$(basename $(@F
)).Tpo \
2684 @GMAKE_TRUE@
$(DEPDIR
)/$(basename $(@F
)).Po
2686 @GMAKE_TRUE@
override COMPILE.pre
= source
='$<' object
='$@' libtool
=no \
2687 @GMAKE_TRUE@ DEPDIR
=$(DEPDIR
) $(DEPMODE
) $(depcomp
) $(CC
)
2688 # depcomp handles atomicity for us, so we don't need a postcompile
2690 @GMAKE_TRUE@
override POSTCOMPILE
=
2693 # A list of all the objects we might care about in this build, for
2694 # dependency tracking.
2695 all_object_files
= gdb.o
$(LIBGDB_OBS
) gdbtk-main.o \
2696 test-cp-name-parser.o
2698 # Ensure that generated files are created early. Use order-only
2699 # dependencies if available. They require GNU make 3.80 or newer,
2700 # and the .VARIABLES variable was introduced at the same time.
2701 @GMAKE_TRUE@
ifdef .VARIABLES
2702 @GMAKE_TRUE@
$(all_object_files
): |
$(generated_files
)
2704 $(all_object_files
) : $(generated_files
)
2708 @GMAKE_TRUE@
-include $(patsubst %.o
, $(DEPDIR
)/%.Po
, $(all_object_files
))
2710 ### end of the gdb Makefile.in.