1 #Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
26 datadir = $(prefix)/lib
27 mandir = $(prefix)/man
28 man1dir = $(mandir)/man1
29 man2dir = $(mandir)/man2
30 man3dir = $(mandir)/man3
31 man4dir = $(mandir)/man4
32 man5dir = $(mandir)/man5
33 man6dir = $(mandir)/man6
34 man7dir = $(mandir)/man7
35 man8dir = $(mandir)/man8
36 man9dir = $(mandir)/man9
37 infodir = $(prefix)/info
38 includedir = $(prefix)/include
39 docdir
= $(datadir)/doc
44 INSTALL_PROGRAM
= $(INSTALL
)
45 INSTALL_DATA
= $(INSTALL
)
51 # Flags that describe where you can find the termcap library.
52 # This can be overridden in the host Makefile fragment file.
55 # System V: If you compile gdb with a compiler which uses the coff
56 # encapsulation feature (this is a function of the compiler used, NOT
57 # of the m-?.h file selected by config.gdb), you must make sure that
58 # the GNU nm is the one that is used by munch.
60 # If you are compiling with GCC, make sure that either 1) You use the
61 # -traditional flag, or 2) You have the fixed include files where GCC
62 # can reach them. Otherwise the ioctl calls in inflow.c
63 # will be incorrectly compiled. The "fixincludes" script in the gcc
64 # distribution will fix your include files up.
69 # Directory containing source files. Don't clean up the spacing,
70 # this exact string is matched for by the "configure" script.
73 # It is also possible that you will need to add -I/usr/include/sys to the
74 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
75 # is where it should be according to Posix).
80 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
81 # Berkeley/Sun don't have quite enough.
85 # where to find texinfo; GDB dist should include a recent one
86 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
88 # where to find makeinfo, preferably one designed for texinfo-2
91 # Set this up with gcc if you have gnu ld and the loader will print out
92 # line numbers for undefinded refs.
96 # Where is the "include" directory? Traditionally ../include or ./include
97 INCLUDE_DIR
= ${srcdir}/..
/include
98 INCLUDE_DEP
= $$(INCLUDE_DIR
)
100 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
101 # or ./mmalloc (When we want the binary library built from it, we use
102 # ${MMALLOC_DIR}${subdir}.)
103 # Note that mmalloc can still be used on systems without mmap().
104 # To use your system malloc, comment out the following defines.
105 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
106 MMALLOC_DEP
= $$(MMALLOC_DIR
)
107 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
108 # To use your system malloc, uncomment MMALLOC_DISABLE.
109 #MMALLOC_DISABLE = -DNO_MMALLOC
110 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
111 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
112 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
114 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
115 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
116 BFD_DIR
= ${srcdir}/..
/bfd
117 BFD_DEP
= $$(BFD_DIR
)
118 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
120 # Where is the source dir for the READLINE library? Traditionally in .. or .
121 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
122 READLINE_DIR
= ${srcdir}/..
/readline
123 READLINE_DEP
= $$(READLINE_DIR
)
124 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
126 # All the includes used for CFLAGS and for lint.
127 # -I. for config files.
128 # -I${srcdir} possibly for regex.h also.
129 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
)
131 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
132 # from the config/ directory.
133 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
134 #PROFILE_CFLAGS = -pg
136 # CFLAGS is specifically reserved for setting from the command line
137 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
139 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
140 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
141 # None of the things in CFLAGS will do any harm, and on some systems
142 # (e.g. SunOS4) it is important to use the M_CFLAGS.
145 # Where is the "-liberty" library, containing getopt and obstack?
146 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
147 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
149 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
150 # If your sysyem is missing alloca(), or, more likely, it's there but
151 # it doesn't work, define ALLOCA & ALLOCA1 too.
152 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
154 # Libraries and corresponding dependencies for compiling gdb.
155 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
156 # TERMCAP comes after readline, since readline depends on it.
157 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
158 ${XM_CLIBS} ${TM_CLIBS}
159 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
160 ${RL_LIB} ${MMALLOC_LIB}
162 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
163 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
169 LINTFLAGS
= -I
${BFD_DIR}
171 # Host and target-dependent makefile fragments come in here.
173 # End of host and target-dependent makefile fragments
176 "against=$(against)" \
178 "AR_FLAGS=$(AR_FLAGS)" \
182 "MAKEINFO=$(MAKEINFO)" \
183 "INSTALL=$(INSTALL)" \
184 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
185 "INSTALL_DATA=$(INSTALL_DATA)" \
188 # Source files in the main directory.
189 # Files which are included via a config/* Makefile fragment
190 # should *not* be specified here; they're in "ALLDEPFILES".
192 blockframe.c breakpoint.c command.c core.c demangle.c \
193 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
194 main.c printcmd.c gdbtypes.c \
195 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
196 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
197 mem-break.c target.c inftarg.c \
198 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
199 ieee-float.c language.c parse.c buildsym.c objfiles.c \
200 minsyms.c mipsread.c maint.c
202 # Source files in subdirectories (which will be handled separately by
204 # Files which are included via a config/* Makefile fragment
205 # should *not* be specified here; they're in "ALLDEPFILES".
207 ${srcdir}/vx-share
/dbgRpcLib.h \
208 ${srcdir}/vx-share
/ptrace.h \
209 ${srcdir}/vx-share
/reg.h \
210 ${srcdir}/vx-share
/vxTypes.h \
211 ${srcdir}/vx-share
/vxWorks.h \
212 ${srcdir}/vx-share
/wait.h \
213 ${srcdir}/vx-share
/xdr_ld.h \
214 ${srcdir}/vx-share
/xdr_ptrace.h \
215 ${srcdir}/vx-share
/xdr_rdb.h \
216 ${srcdir}/vx-share
/xdr_regs.h \
217 ${srcdir}/nindy-share
/b.out.h \
218 ${srcdir}/nindy-share
/block_io.h \
219 ${srcdir}/nindy-share
/coff.h \
220 ${srcdir}/nindy-share
/demux.h \
221 ${srcdir}/nindy-share
/env.h \
222 ${srcdir}/nindy-share
/stop.h \
223 ${srcdir}/nindy-share
/ttycntl.h
225 # Non-source files in subdirs, that should go into gdb.tar.Z.
227 ${srcdir}/nindy-share
/Makefile \
228 ${srcdir}/nindy-share
/VERSION
230 # All source files that go into linking GDB, except config-specified files.
231 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
233 # All source files that lint should look at
234 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
236 # Any additional files specified on these lines should also be added to
237 # the OTHERS = definition below, so they go in the tar files.
238 SFILES_STAND
= $(SFILES
) standalone.c
239 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
241 # Header files that are not named in config/* Makefile fragments go here.
242 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h \
243 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
245 ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
246 serial.h signals.h symfile.h symtab.h solib.h xcoffsolib.h \
247 target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
248 xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h xm-vax.h
250 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
252 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
253 POSSLIBS
= $(POSSLIBS_MAINDIR
)
255 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
257 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
258 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
259 README TODO TAGS WHATS.NEW Projects \
260 .gdbinit COPYING
$(YYFILES
) \
261 copying.c Convex.notes copying.awk \
262 saber.suppress standalone.c stuff.c kdb-start.c \
265 # Subdirectories of gdb, which should be included in their entirety in
267 TARDIRS
= doc
# tests
269 # GDB "info" files, which should be included in their entirety
270 INFOFILES
= gdb.
info*
272 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
274 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
275 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
276 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
277 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
278 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
280 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
281 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
282 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
283 command.o utils.o expprint.o environ.o version.o gdbtypes.o \
284 copying.o
$(DEPFILES
) mem-break.o target.o \
285 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
286 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
287 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
290 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
292 TSOBS
= core.o inflow.o
294 NTSOBS
= standalone.o
296 TSSTART
= /lib
/crt0.o
298 NTSSTART
= kdb-start.o
302 # For now, shortcut the "configure GDB for fewer languages" stuff.
303 YYFILES
= c-exp.tab.c m2-exp.tab.c
304 YYOBJ
= c-exp.tab.o m2-exp.tab.o
306 # Prevent Sun make from putting in the machine type. Setting
307 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
309 ${CC} -c
${INTERNAL_CFLAGS} $<
312 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
315 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
317 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
319 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
322 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
323 pack gdb.t
; rm -f gdb.t
327 -parent
=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
328 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
329 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; fi
330 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
331 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
332 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; fi
333 -n
=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
334 $(INSTALL_PROGRAM
) gdb
$(bindir)/$$n; \
335 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$$n.1
337 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
339 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
340 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
342 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
343 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
344 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
346 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
347 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
348 #load ./init.c $(SFILES)
349 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
350 #unload ${srcdir}/nindy-share/[A-Z]*
351 #load c-exp.tab.c m2-exp.tab.c
352 #load copying.c version.c
353 #load ../libiberty/libiberty.a
354 #load ../bfd/libbfd.a
355 #load ../readline/libreadline.a
356 #load ../mmalloc/libmmalloc.a
358 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
359 echo
"Load .c corresponding to:" $(DEPFILES
)
362 # This is useful when debugging GDB, because some Unix's don't let you run GDB
363 # on itself without copying the executable. So "make gdb1" will make
364 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
365 # Removing gdb1 before the copy is the right thing if gdb1 is open
366 # in another process.
371 # This is a remote stub which runs under unix and starts up an
372 # inferior process. This is at least useful for debugging GDB's
376 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
377 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
379 # Support for building Makefile out of configured pieces, automatically
380 # generated dependencies, etc. alldeps.mak is a file that contains
381 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
382 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
383 # contents of the config subdirectory.
385 alldeps.mak
: ${srcdir}/config
386 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
387 for i in
`ls -d ${srcdir}/config/*.m[ht]` ; do \
388 echo
$$i >>allconfig.tmp
; \
390 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
391 for (i = 2; i <= NF; i++) \
392 print $$i >> "alldeps.tmp" ; \
394 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
395 print $$2 >> "allparam.tmp" }' ; \
397 sort <alldeps.tmp | uniq | \
398 sed
-e
's/arm-convert.o/arm-convert.s/' \
399 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
400 -e
's!^nindy.o!nindy-share/nindy.c!' \
401 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
402 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
403 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
404 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
405 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
406 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
409 echo
'# Start of "alldeps.mak" definitions' \
411 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
413 grep
-v
/ alldeps2.tmp | \
414 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
415 NR == 0 {printf $$0;} \
416 NR != 0 {printf "\\\n" $$0} \
417 END {printf "\n\n"}' >>alldeps.mak
;
418 grep
/ alldeps2.tmp | \
419 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
420 NR == 0 {printf $$0;} \
421 NR != 0 {printf "\\\n" $$0} \
422 END {printf "\n\n"}' >>alldeps.mak
;
423 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
424 NR == 0 {printf $$0;} \
425 NR != 0 {printf "\\\n" $$0} \
426 END {printf "\n\n"}' >>alldeps.mak
;
427 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
428 NR == 0 {printf $$0;} \
429 NR != 0 {printf "\\\n" $$0} \
430 END {printf "\n\n"}' >>alldeps.mak
;
431 echo
'# End of "alldeps.mak" definitions' \
433 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
435 # The sed script makes everything which depends on {x,t}m.h depend on
436 # config.status as well, in case someone reconfigures gdb out from
437 # under an already compiled gdb.
438 depend
: $(SOURCES
) Makefile.in
439 @echo Ignore errors about non-existent system-supplied
include files
440 @echo for systems other than the one you are using.
441 @echo Also ignore parse errors in valops.c
, and any errors in
444 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
445 -I
${READLINE_DIR} $(INCLUDE_CFLAGS
) \
446 `ls $(SOURCES) | grep -v '\.[hy]$$' | \
448 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
449 # for xm.h and tm.h. This allows the same "depend" file to be used
450 # by the various subdirectories.
451 if
[ "${srcdir}" = "." ] ; then \
453 -e
's; ./xm.h; xm.h;g' \
454 -e
's; ./tm.h; tm.h;g' \
455 -e
's; \./; $${srcdir}/;g' \
456 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
457 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
460 mv depend.tm2 depend.tmp
; \
463 -e
's; [xt]m.h;& config.status;g' \
464 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
465 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
466 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
467 -e
's; ./xm.h; xm.h config.status;g' \
468 -e
's; ./tm.h; tm.h config.status;g' \
473 @echo
"You must configure gdb. Look at the README file for details."
476 # This checks the configure.in file versus the config/ directory.
477 config-check
: config-check-hosts config-check-targets
479 grep gdb_host
= ${srcdir}/configure.in | \
480 sed
-e
's/.*gdb_host=//' -e
's/ ;;$$/.mh/' |
sort -u
>HOSTconf.o
481 (cd
${srcdir}/config
; ls
*.mh
) >HOSTdir.o
482 diff
-u HOSTconf.o HOSTdir.o
484 config-check-targets
:
485 grep gdb_target
= ${srcdir}/configure.in | \
486 sed
-e
's/.*gdb_target=//' -e
's/ ;;$$/.mh/' |
sort -u
>TARGconf.o
487 (cd
${srcdir}/config
; ls
*.mt
) >TARGdir.o
488 diff
-u HOSTconf.o HOSTdir.o
490 # These are not generated by "make depend" because they only are there
492 # But these rules don't do what we want; we want to hack the foo.o: tm.h
493 # dependency to do the right thing.
494 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
495 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
496 xm-news1000.h
: xm-news.h
497 xm-i386-sv32.h
: xm-i386.h
498 tm-i386gas.h
: tm-i386.h
499 xm-sun4os4.h
: xm-sparc.h
500 tm-sun4os4.h
: tm-sparc.h
501 xm-vaxult.h
: xm-vax.h
502 xm-vaxbsd.h
: xm-vax.h
504 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
506 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
507 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
508 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
511 # Put the proper machine-specific files first.
512 # createtags will edit the .o in DEPFILES into .c
514 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
517 # Making distributions of GDB and friends.
519 # Make a directory `proto-gdb.dir' that contains an image of the GDB
520 # directory of the distribution, built up with symlinks.
521 make-proto-gdb.
dir: force_update
522 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
523 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
525 # Make a tar file containing the GDB directory of the distribution.
526 gdb.
tar.Z
: force_update
527 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
528 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
530 # Set up the GDB directory for distribution, by building all files that
531 # are products of other files.
532 setup-to-dist
: force_update
535 $(MAKE
) $(MFLAGS
) alldeps.mak
538 $(MAKE
) $(MFLAGS
) depend
540 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
541 $(MAKE
) $(MFLAGS
) gdb.
info
542 $(MAKE
) $(MFLAGS
) refcard.ps
544 # Build a tar file from a proto-gdb.dir.
545 gdb-
$(VERSION
).
tar.Z
: force_update
546 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
547 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
548 ln
-s proto-gdb.
dir $(DIST
)
549 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
550 rm -rf
$(DIST
) proto-gdb.
dir
552 # Build a proto-gdb.dir after GDB has been set up for distribution.
553 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
554 # built in the setup-to-dist process, since it defines things like ALLCONFIG
555 # and ALLDEPFILES, that we need.
556 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
559 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
560 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
561 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
563 ln
-s ..
/..
/$$i/* .
; \
564 rm -rf SCCS CVS.adm RCS config.status
; \
565 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
; done
566 mkdir proto-gdb.
dir/config
567 cd proto-gdb.
dir/config
; \
568 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
569 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
570 cd proto-gdb.
dir/config
; \
571 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
572 do ln
-s ..
/..
/$$i ..
/$$i ; done
573 chmod og
=u
`find . -print`
576 rm -f
*.o
${ADD_FILES} *~
577 rm -f init.c version.c
578 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
580 @
$(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
582 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
583 rm -f tm.h xm.h config.status
584 rm -f y.output
yacc.acts
yacc.tmp
585 rm -f
${TESTS} Makefile depend
586 @
$(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
589 rm -f c-exp.tab.c m2-exp.tab.c TAGS
590 rm -f tm.h xm.h config.status
591 rm -f Makefile depend
592 @
$(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
)
594 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
597 @for i in
$(DODIRS
); do \
598 if
[ -d .
/$$i ] ; then \
600 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
605 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
606 $(SHELL
) .
/config.status
611 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
612 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
613 ( cd .
/doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
) )
614 mv .
/doc
/refcard.
dvi .
616 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
617 refcard.ps
: $(srcdir)/doc
/refcard.
tex
618 ( cd .
/doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
) )
619 mv .
/doc
/refcard.ps .
621 # GDB MANUAL: TeX dvi file
622 gdb.
dvi: .
/doc
/gdb-all.texi
623 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi $(FLAGS_TO_PASS
) )
626 # GDB MANUAL: info file
627 gdb.
info: .
/doc
/gdb-all.texi
628 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
info $(FLAGS_TO_PASS
) )
632 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
$(FLAGS_TO_PASS
) )
634 # Make copying.c from COPYING
635 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
636 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
639 echo
'char *version = "$(VERSION)";' >version.c
641 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
642 # in srcdir, then compiled in target dir to c-exp.tab.o.
643 # Remove bogus decls for malloc/realloc/free which conflict with everything
645 c-exp.tab.o
: c-exp.tab.c
646 c-exp.tab.c
: $(srcdir)/c-exp.y
647 @echo
'Expect 4 shift/reduce conflicts.'
648 ${YACC} $(srcdir)/c-exp.y
649 -sed
-e
'/extern.*malloc/d' \
650 -e
'/extern.*realloc/d' \
651 -e
'/extern.*free/d' \
652 < y.tab.c
> c-exp.tab.c
655 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
656 # in srcdir, then compiled in target dir to m2-exp.tab.o.
657 m2-exp.tab.o
: m2-exp.tab.c
658 m2-exp.tab.c
: $(srcdir)/m2-exp.y
659 ${YACC} $(srcdir)/m2-exp.y
660 -sed
-e
'/extern.*malloc/d' \
661 -e
'/extern.*realloc/d' \
662 -e
'/extern.*free/d' \
663 < y.tab.c
> m2-exp.tab.c
667 main.o
: ${srcdir}/main.c
668 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
670 # The symbol-file readers have dependencies on BFD header files.
671 dbxread.o
: ${srcdir}/dbxread.c
672 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
674 coffread.o
: ${srcdir}/coffread.c
675 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
677 mipsread.o
: ${srcdir}/mipsread.c
678 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
680 elfread.o
: ${srcdir}/elfread.c
681 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
683 dwarfread.o
: ${srcdir}/dwarfread.c
684 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
686 stabsread.o
: ${srcdir}/stabsread.c
687 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
689 xcoffread.o
: ${srcdir}/xcoffread.c
690 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
692 xcoffexec.o
: ${srcdir}/xcoffexec.c
693 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
695 # Drag in the files that are in another directory.
697 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
698 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
700 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
701 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
703 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
704 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
706 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
707 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
709 nindy.o
: ${srcdir}/nindy-share
/nindy.c
710 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/nindy.c
712 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
713 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
715 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
716 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
718 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
719 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
722 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
723 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
726 cxref -I. $(SFILES) >gdb.cxref
730 # GNU Make has an annoying habit of putting *all* the Makefile variables
731 # into the environment, unless you include this target as a circumvention.
732 # Rumor is that this will be fixed (and this target can be removed)
736 # This is the end of "Makefile.in". When built into "Makefile"
737 # by the configure script, two things are added below this point:
738 # alldeps.mak -- defintions of all files that are used in
739 # host- or target-dependent configurations
740 # depend -- what .o files depend on what .c and .h files,
741 # for all configurations.