1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 # Host and target-dependent makefile fragments come in here.
21 # End of host and target-dependent makefile fragments
23 # Destination directory of the software tree build
26 # Place to install binaries in the destination tree.
29 # System V: If you compile gdb with a compiler which uses the coff
30 # encapsulation feature (this is a function of the compiler used, NOT
31 # of the m-?.h file selected by config.gdb), you must make sure that
32 # the GNU nm is the one that is used by munch.
34 # If you are compiling with GCC, make sure that either 1) You use the
35 # -traditional flag, or 2) You have the fixed include files where GCC
36 # can reach them. Otherwise the ioctl calls in inflow.c
37 # will be incorrectly compiled. The "fixincludes" script in the gcc
38 # distribution will fix your include files up.
43 # Directory containing source files. Don't clean up the spacing,
44 # this exact string is matched for by the "configure" script.
47 # It is also possible that you will need to add -I/usr/include/sys to the
48 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
49 # is where it should be according to Posix).
53 YACC
=$(BISON
) $(BISONFLAGS
)
58 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
59 # Berkeley/Sun don't have quite enough.
63 # where to find texinfo; GDB dist should include a recent one
64 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
66 # where to find makeinfo, preferably one designed for texinfo-2
69 # Set this up with gcc if you have gnu ld and the loader will print out
70 # line numbers for undefinded refs.
74 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
75 # (useful for debugging memory allocation problems in gdb). To use your
76 # system malloc, uncomment the following two lines.
78 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
79 GNU_MALLOC
= gmalloc.o mcheck.o mtrace.o
82 # Where is the "include" directory? Traditionally ../include or ./include
83 INCLUDE_DIR
= ${srcdir}/..
/include
84 INCLUDE_DEP
= $$(INCLUDE_DIR
)
86 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
87 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
88 BFD_DIR
= ${srcdir}/..
/bfd
90 BFD_LIB
= $(BFD_DIR
)${subdir}/libbfd.a
92 # Where is the source dir for the READLINE library? Traditionally in .. or .
93 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
94 READLINE_DIR
= ${srcdir}/..
/readline
95 READLINE_DEP
= $$(READLINE_DIR
)
96 RL_LIB
= $(READLINE_DIR
)${subdir}/libreadline.a
98 # All the includes used for CFLAGS and for lint.
99 # -I. for config files.
100 # -I${srcdir} possibly for regex.h also.
101 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
) -I
${srcdir}/vx-share
103 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
105 GLOBAL_CFLAGS
= -g
${TM_CFLAGS} ${XM_CFLAGS}
106 #PROFILE_CFLAGS = -pg
108 CFLAGS
= ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
109 # None of the things in CFLAGS will do any harm, and on some systems
110 # (e.g. SunOS4) it is important to use the M_CFLAGS.
113 # Where is the "-liberty" library, containing getopt and obstack?
114 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
115 LIBIBERTY
= ${LIBIBERTY_DIR}${subdir}/libiberty.a
117 # Flags that describe where you can find the termcap library.
118 # You may need to make other arrangements for USG.
121 # The xconfig file must define REGEX and REGEX1 on USG machines.
122 # If your sysyem is missing alloca(), or, more likely, it's there but
123 # it doesn't work, define ALLOCA & ALLOCA1 too.
124 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
126 # Libraries and corresponding dependencies for compiling gdb.
127 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
128 # TERMCAP comes after readline, since readline depends on it.
129 CLIBS
= ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP} ${XM_CLIBS} ${TM_CLIBS}
130 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
132 ADD_FILES
= ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
133 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
141 # Source files in the main directory.
142 # Files which are included via a tconfig/* or xconfig/* file
143 # should *not* be specified here; they're in "ALLDEPFILES".
145 blockframe.c breakpoint.c command.c core.c \
146 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
148 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
149 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
150 signame.c cplus-dem.c mem-break.c target.c inftarg.c \
151 dbxread.c coffread.c elfread.c dwarfread.c \
152 ieee-float.c language.c parse.c buildsym.c
153 # xcoffread.c xcoffexec.c \
155 # Source files in subdirectories (which will be handled separately by
157 # Files which are included via a tconfig/* or xconfig/* file
158 # should *not* be specified here; they're in "ALLDEPFILES".
160 ${srcdir}/vx-share
/dbgRpcLib.h \
161 ${srcdir}/vx-share
/ptrace.h \
162 ${srcdir}/vx-share
/reg.h \
163 ${srcdir}/vx-share
/vxTypes.h \
164 ${srcdir}/vx-share
/vxWorks.h \
165 ${srcdir}/vx-share
/wait.h \
166 ${srcdir}/vx-share
/xdr_ld.h \
167 ${srcdir}/vx-share
/xdr_ptrace.h \
168 ${srcdir}/vx-share
/xdr_rdb.h \
169 ${srcdir}/vx-share
/xdr_regs.h \
170 ${srcdir}/nindy-share
/b.out.h \
171 ${srcdir}/nindy-share
/block_io.h \
172 ${srcdir}/nindy-share
/coff.h \
173 ${srcdir}/nindy-share
/demux.h \
174 ${srcdir}/nindy-share
/env.h \
175 ${srcdir}/nindy-share
/stop.h \
176 ${srcdir}/nindy-share
/ttycntl.h
178 # Non-source files in subdirs, that should go into gdb.tar.Z.
180 ${srcdir}/nindy-share
/Makefile \
181 ${srcdir}/nindy-share
/VERSION
183 # All source files that go into linking GDB, except config-specified files.
184 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
186 # All source files that lint should look at
187 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
189 # Any additional files specified on these lines should also be added to
190 # the OTHERS = definition below, so they go in the tar files.
191 SFILES_STAND
= $(SFILES
) standalone.c
192 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
194 # Header files that are not named in tconfig/* or xconfig/* go here.
195 HFILES
= breakpoint.h command.h defs.h environ.h \
196 expression.h frame.h gdbcmd.h gdbcore.h getpagesize.h \
197 ieee-float.h inferior.h minimon.h param-no-tm.h param.h \
198 signals.h signame.h symfile.h symtab.h \
199 target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
200 language.h parser-defs.h value.h
202 # Header files for machine opcode tables.
203 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
204 # business, since they will be included in the separate includes tar file
205 # rather than in the gdb tar file.
207 OPCODES
= $(OPCODE_DIR
)pn-opcode.h
$(OPCODE_DIR
)np1-opcode.h \
208 $(OPCODE_DIR
)sparc-opcode.h
$(OPCODE_DIR
)vax-opcode.h \
209 $(OPCODE_DIR
)m68k-opcode.h
$(OPCODE_DIR
)ns32k-opcode.h \
210 $(OPCODE_DIR
)convx-opcode.h
$(OPCODE_DIR
)pyr-opcode.h \
211 $(OPCODE_DIR
)mips-opcode.h
$(OPCODE_DIR
)am29k-opcode.h \
212 $(OPCODE_DIR
)arm-opcode.h
$(OPCODE_DIR
)m88k-opcode.h \
213 $(OPCODE_DIR
)tahoe-opcode.h
215 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
217 MALLOCSRC
= gmalloc.c mcheck.c mtrace.c mtrace.awk \
220 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
$(MALLOCSRC
)
221 POSSLIBS
= $(POSSLIBS_MAINDIR
)
223 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
225 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
226 # would try to make it from tdesc.c.
227 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
228 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
229 ChangeLog ChangeLog-3.x refcard.ps \
230 README TODO TAGS WHATS.NEW Projects \
231 .gdbinit COPYING
$(YYFILES
) \
232 copying.c Convex.notes copying.awk \
233 saber.suppress standalone.c stuff.c kdb-start.c \
236 # Subdirectories of gdb, which should be included in their entirety in
238 TARDIRS
= doc
# tests
240 # GDB "info" files, which should be included in their entirety
241 INFOFILES
= gdb.
info*
243 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
245 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
246 TAGFILES
= $(SOURCES
) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
247 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
248 ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
249 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
251 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
252 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
253 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
254 command.o utils.o expprint.o environ.o version.o \
255 copying.o
$(DEPFILES
) signame.o cplus-dem.o mem-break.o target.o \
256 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
258 dbxread.o coffread.o elfread.o dwarfread.o
# mipsread.o
259 # xcoffexec.o xcoffread.o \
261 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
263 TSOBS
= core.o inflow.o
265 NTSOBS
= standalone.o
267 TSSTART
= /lib
/crt0.o
269 NTSSTART
= kdb-start.o
271 # For now, shortcut the "configure GDB for fewer languages" stuff.
272 YYFILES
= c-exp.tab.c m2-exp.tab.c
273 YYOBJ
= c-exp.tab.o m2-exp.tab.o
275 # Prevent Sun make from putting in the machine type. Setting
276 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
278 ${CC} -c
${CFLAGS} $<
283 cp gdb
$(bindir)/gdb.new
284 mv
$(bindir)/gdb.new
$(bindir)/gdb
287 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
288 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
290 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
291 ${CC-LD
} $(LDFLAGS
) -o gdb init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) \
292 $(CLIBS
) $(LOADLIBES
)
294 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
295 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
296 #load ./init.c $(SFILES)
297 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
298 #unload ${srcdir}/nindy-share/[A-Z]*
299 #load c-exp.tab.c m2-exp.tab.c
300 #load copying.c version.c
301 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
302 #load ${LIBIBERTY_DIR}/*.c
304 #load ${READLINE_DIR}/*.c
306 ##void mcheck(a) void (*a)(); { }
311 # This is useful when debugging GDB, because some Unix's don't let you run GDB
312 # on itself without copying the executable. So "make gdb1" will make
313 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
314 # Removing gdb1 before the copy is the right thing if gdb1 is open
315 # in another process.
320 # This is a remote stub which runs under unix and starts up an
321 # inferior process. This is at least useful for debugging GDB's
325 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
326 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
328 # Support for building Makefile out of configured pieces, automatically
329 # generated dependencies, etc. alldeps.mak is a file that contains
330 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
331 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
332 # contents of the xconfig and tconfig subdirectories.
334 alldeps.mak
: ${srcdir}/tconfig
${srcdir}/xconfig
335 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
336 for i in
`ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
337 ${srcdir}/xconfig/*[0-9A-Za-z] | \
338 grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
339 echo
$$i >>allconfig.tmp
; \
341 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
342 for (i = 2; i <= NF; i++) \
343 print $$i >> "alldeps.tmp" ; \
345 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
346 print $$2 >> "allparam.tmp" }' ; \
348 sort <alldeps.tmp | uniq | \
349 sed
-e
's/arm-convert.o/arm-convert.s/' \
350 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
351 -e
's!^nindy.o!nindy-share/nindy.c!' \
352 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
353 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
354 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
355 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
356 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
357 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
360 echo
'# Start of "alldeps.mak" definitions' \
362 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
364 grep
-v
/ alldeps2.tmp | \
365 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
366 NR == 0 {printf $$0;} \
367 NR != 0 {printf "\\\n" $$0} \
368 END {printf "\n\n"}' >>alldeps.mak
;
369 grep
/ alldeps2.tmp | \
370 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
371 NR == 0 {printf $$0;} \
372 NR != 0 {printf "\\\n" $$0} \
373 END {printf "\n\n"}' >>alldeps.mak
;
374 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
375 NR == 0 {printf $$0;} \
376 NR != 0 {printf "\\\n" $$0} \
377 END {printf "\n\n"}' >>alldeps.mak
;
378 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
379 NR == 0 {printf $$0;} \
380 NR != 0 {printf "\\\n" $$0} \
381 END {printf "\n\n"}' >>alldeps.mak
;
382 echo
'# End of "alldeps.mak" definitions' \
384 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
386 # The sed script makes everything which depends on {x,t}m.h depend on
387 # config.status as well, in case someone reconfigures gdb out from
388 # under an already compiled gdb.
389 depend
: $(SOURCES
) Makefile.in
390 @echo Ignore errors about non-existent system-supplied
include files
391 @echo for systems other than the one you are using.
392 @echo
"If xm.h and tm.h don't exist, the error messages saying so"
393 @echo can safely be ignored.
394 @echo Also ignore parse errors in valops.c
, and any errors in
396 -$(GCC
) -MM
$(CFLAGS
) -I
$(BFD_DIR
) \
397 `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
398 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
399 # for xm.h and tm.h. This allows the same "depend" file to be used
400 # by the various subdirectories.
401 if
[ "${srcdir}" = "." ] ; then \
403 -e
's; ./xm.h; xm.h;g' \
404 -e
's; ./tm.h; tm.h;g' \
405 -e
's; \./; $${srcdir}/;g' \
406 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
407 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
410 mv depend.tm2 depend.tmp
; \
413 -e
's; [xt]m.h;& config.status;g' \
414 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
415 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
416 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
417 -e
's; ./xm.h; xm.h config.status;g' \
418 -e
's; ./tm.h; tm.h config.status;g' \
423 @echo
"You must configure gdb. Look at the README file for details."
426 # These are not generated by "make depend" because they only are there
428 # But these rules don't do what we want; we want to hack the foo.o: tm.h
429 # dependency to do the right thing.
430 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
431 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
432 xm-news1000.h
: xm-news.h
433 xm-i386-sv32.h
: xm-i386.h
434 tm-i386gas.h
: tm-i386.h
435 xm-sun4os4.h
: xm-sparc.h
436 tm-sun4os4.h
: tm-sparc.h
438 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
440 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
441 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
442 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
445 # Put the proper machine-specific files first.
446 # createtags will edit the .o in DEPFILES into .c
448 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
451 # Making distributions of GDB and friends.
453 # Make a directory `proto-gdb.dir' that contains an image of the GDB
454 # directory of the distribution, built up with symlinks.
455 make-proto-gdb.
dir: force_update
456 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
457 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
459 # Make a tar file containing the GDB directory of the distribution.
460 gdb.
tar.Z
: force_update
461 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
462 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
464 # Set up the GDB directory for distribution, by building all files that
465 # are products of other files.
466 setup-to-dist
: force_update
469 $(MAKE
) $(MFLAGS
) alldeps.mak
472 $(MAKE
) $(MFLAGS
) depend
474 (cd doc
; $(MAKE
) $(MFLAGS
) rdl-apps.texi gdbVN.m4
)
475 $(MAKE
) $(MFLAGS
) gdb.
info
476 $(MAKE
) $(MFLAGS
) refcard.ps
478 # Build a tar file from a proto-gdb.dir.
479 gdb-
$(VERSION
).
tar.Z
: force_update
480 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
481 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
482 ln
-s proto-gdb.
dir $(DIST
)
483 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
484 rm -rf
$(DIST
) proto-gdb.
dir
486 # Build a proto-gdb.dir after GDB has been set up for distribution.
487 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
488 # built in the setup-to-dist process, since it defines things like ALLCONFIG
489 # and ALLDEPFILES, that we need.
490 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
493 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
494 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
495 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
496 (mkdir
$$i; cd
$$i; \
497 ln
-s ..
/..
/$$i/* .
; \
498 rm -rf SCCS CVS.adm RCS
); done
499 mkdir proto-gdb.
dir/xconfig proto-gdb.
dir/tconfig
500 cd proto-gdb.
dir/tconfig
; \
501 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
502 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
503 cd proto-gdb.
dir/tconfig
; \
504 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
505 do ln
-s ..
/..
/$$i ..
/$$i ; done
506 chmod og
=u
`find . -print`
509 rm -f
${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
510 rm -f init.c init.o version.c
511 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
513 cd
$(srcdir)/doc
; $(MAKE
) clean
515 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
516 rm -f tm.h xm.h config.status
517 rm -f y.output
yacc.acts
yacc.tmp
518 rm -f
${TESTS} Makefile depend
521 rm -f c-exp.tab.c m2-exp.tab.c TAGS
522 rm -f tm.h xm.h config.status
523 rm -f Makefile depend
525 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
527 # Copy the object files from a particular stage into a subdirectory.
530 -mv
-f
$(STAGESTUFF
) stage1
534 -mv
-f
$(STAGESTUFF
) stage2
538 -mv
-f
$(STAGESTUFF
) stage3
543 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
546 - (cd stage1
; mv
-f
* ..
)
550 - (cd stage2
; mv
-f
* ..
)
554 - (cd stage3
; mv
-f
* ..
)
557 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
558 $(SHELL
) .
/config.status
563 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
564 refcard.
dvi : $(srcdir)/doc
/refcard.
tex
565 ( cd
$(srcdir)/doc
; $(MAKE
) refcard.
dvi )
566 mv
$(srcdir)/doc
/refcard.
dvi .
568 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
569 refcard.ps
: $(srcdir)/doc
/refcard.
tex
570 ( cd
$(srcdir)/doc
; $(MAKE
) refcard.ps
)
571 mv
$(srcdir)/doc
/refcard.ps .
573 # GDB MANUAL: TeX dvi file
574 gdb.
dvi : $(srcdir)/doc
/gdb-all.texi
$(srcdir)/doc
/rdl-apps.texi
575 ( cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi )
576 mv
$(srcdir)/doc
/gdb.
dvi .
578 # GDB MANUAL: info file
579 gdb.
info: $(srcdir)/doc
/gdb-all.texi
580 ( cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb.
info )
581 mv
$(srcdir)/doc
/gdb.
info* .
583 $(srcdir)/doc
/gdb-all.texi
:
584 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
)
585 $(srcdir)/doc
/rdl-apps.texi
:
586 (cd
$(srcdir)/doc
; $(MAKE
) rdl-apps.texi
)
588 # Make copying.c from COPYING
589 copying.c
: COPYING copying.awk
590 awk
-f copying.awk
< COPYING
> copying.c
592 version.c
: Makefile.in
593 echo
'char *version = "$(VERSION)";' >version.c
595 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
596 # in srcdir, then compiled in target dir to c-exp.tab.o.
597 c-exp.tab.o
: c-exp.tab.c
598 c-exp.tab.c
: $(srcdir)/c-exp.y
599 @echo
'Expect 4 shift/reduce conflicts.'
600 ${YACC} $(srcdir)/c-exp.y
601 - mv y.tab.c c-exp.tab.c
603 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
604 # in srcdir, then compiled in target dir to m2-exp.tab.o.
605 m2-exp.tab.o
: m2-exp.tab.c
606 m2-exp.tab.c
: $(srcdir)/m2-exp.y
607 ${YACC} $(srcdir)/m2-exp.y
608 - mv y.tab.c m2-exp.tab.c
610 # The symbol-file readers have dependencies on BFD header files.
611 dbxread.o
: ${srcdir}/dbxread.c
612 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
614 coffread.o
: ${srcdir}/coffread.c
615 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
617 mipsread.o
: ${srcdir}/mipsread.c
618 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
620 elfread.o
: ${srcdir}/elfread.c
621 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
623 xcoffread.o
: ${srcdir}/xcoffread.c
624 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
626 # Drag in the files that are in another directory.
628 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
629 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
631 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
632 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
634 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
635 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
637 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
638 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
640 nindy.o
: ${srcdir}/nindy-share
/nindy.c
641 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/nindy.c
643 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
644 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/Onindy.c
646 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
647 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
649 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
650 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
652 tdesc-lib
/libdc.o
: force_update
653 cd tdesc-lib
; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
656 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
)
659 cxref
-I.
$(SFILES
) >gdb.cxref
663 # When used with GDB, the demangler should never look for leading
664 # underscores because GDB strips them off during symbol read-in. Thus
667 cplus-dem.o
: cplus-dem.c
668 ${CC} -c
${CFLAGS} -Dnounderscore \
669 `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
671 # GNU Make has an annoying habit of putting *all* the Makefile variables
672 # into the environment, unless you include this target as a circumvention.
673 # Rumor is that this will be fixed (and this target can be removed)
677 # This is the end of "Makefile.in". When built into "Makefile"
678 # by the configure script, two things are added below this point:
679 # alldeps.mak -- defintions of all files that are used in
680 # host- or target-dependent configurations
681 # depend -- what .o files depend on what .c and .h files,
682 # for all configurations.