1 #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
25 tooldir
= $(libdir)/$(target_alias
)
27 datadir = $(prefix)/lib
28 mandir = $(prefix)/man
29 man1dir = $(mandir)/man1
30 man2dir = $(mandir)/man2
31 man3dir = $(mandir)/man3
32 man4dir = $(mandir)/man4
33 man5dir = $(mandir)/man5
34 man6dir = $(mandir)/man6
35 man7dir = $(mandir)/man7
36 man8dir = $(mandir)/man8
37 man9dir = $(mandir)/man9
38 infodir = $(prefix)/info
39 includedir = $(prefix)/include
40 docdir
= $(datadir)/doc
45 INSTALL_PROGRAM
= $(INSTALL
)
46 INSTALL_DATA
= $(INSTALL
)
52 # Flags that describe where you can find the termcap library.
53 # This can be overridden in the host Makefile fragment file.
56 # System V: If you compile gdb with a compiler which uses the coff
57 # encapsulation feature (this is a function of the compiler used, NOT
58 # of the m-?.h file selected by config.gdb), you must make sure that
59 # the GNU nm is the one that is used by munch.
61 # If you are compiling with GCC, make sure that either 1) You use the
62 # -traditional flag, or 2) You have the fixed include files where GCC
63 # can reach them. Otherwise the ioctl calls in inflow.c
64 # will be incorrectly compiled. The "fixincludes" script in the gcc
65 # distribution will fix your include files up.
70 # Directory containing source files. Don't clean up the spacing,
71 # this exact string is matched for by the "configure" script.
74 # It is also possible that you will need to add -I/usr/include/sys to the
75 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
76 # is where it should be according to Posix).
78 # If you use bison instead of yacc, it needs to include the "-y" argument.
83 # where to find texinfo; GDB dist should include a recent one
84 TEXIDIR
=${srcdir}/..
/texinfo
86 # where to find makeinfo, preferably one designed for texinfo-2
89 # Set this up with gcc if you have gnu ld and the loader will print out
90 # line numbers for undefinded refs.
94 # Where is the "include" directory? Traditionally ../include or ./include
95 INCLUDE_DIR
= ${srcdir}/..
/include
96 INCLUDE_DEP
= $$(INCLUDE_DIR
)
98 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
99 # or ./mmalloc (When we want the binary library built from it, we use
100 # ${MMALLOC_DIR}${subdir}.)
101 # Note that mmalloc can still be used on systems without mmap().
102 # To use your system malloc, comment out the following defines.
103 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
104 MMALLOC_DEP
= $$(MMALLOC_DIR
)
105 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
106 # To use your system malloc, uncomment MMALLOC_DISABLE.
107 #MMALLOC_DISABLE = -DNO_MMALLOC
108 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
109 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
110 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
112 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
113 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
114 BFD_DIR
= ${srcdir}/..
/bfd
115 BFD_DEP
= $$(BFD_DIR
)
116 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
118 # Where is the source dir for the READLINE library? Traditionally in .. or .
119 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
120 READLINE_DIR
= ${srcdir}/..
/readline
121 READLINE_DEP
= $$(READLINE_DIR
)
122 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
124 # All the includes used for CFLAGS and for lint.
125 # -I. for config files.
126 # -I${srcdir} possibly for regex.h also.
127 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
)
129 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
130 # from the config/ directory.
131 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
132 #PROFILE_CFLAGS = -pg
134 # CFLAGS is specifically reserved for setting from the command line
135 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
137 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
138 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
139 # None of the things in CFLAGS will do any harm, and on some systems
140 # (e.g. SunOS4) it is important to use the MH_CFLAGS.
143 # Where is the "-liberty" library, containing getopt and obstack?
144 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
145 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
147 # Where is the "-lopcodes" library, with (some of) the opcode tables and
149 OPCODES
= .
/..
/opcodes
${subdir}/libopcodes.a
151 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
152 # If your sysyem is missing alloca(), or, more likely, it's there but
153 # it doesn't work, define ALLOCA & ALLOCA1 too.
155 # Libraries and corresponding dependencies for compiling gdb.
156 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
157 # TERMCAP comes after readline, since readline depends on it.
158 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
159 ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
160 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
161 ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
163 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
164 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
170 LINTFLAGS
= -I
${BFD_DIR}
174 # Host and target-dependent makefile fragments come in here.
176 # End of host and target-dependent makefile fragments
180 "exec_prefix=$(exec_prefix)" \
181 "against=$(against)" \
183 "AR_FLAGS=$(AR_FLAGS)" \
186 $(start-sanitize-chill
)\
187 "CHILLFLAGS=$(CHILLFLAGS)" \
189 "CHILL_LIB=$(CHILL_LIB)" \
190 $(end-sanitize-chill
)\
192 "CXXFLAGS=$(CXXFLAGS)" \
194 "MAKEINFO=$(MAKEINFO)" \
195 "INSTALL=$(INSTALL)" \
196 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
197 "INSTALL_DATA=$(INSTALL_DATA)" \
200 # Flags that we pass when building the testsuite.
203 if [ -f $${rootme}/../gcc/Makefile ] ; then \
204 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
206 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
209 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
216 if [ -f $${rootme}/../gcc/Makefile ] ; then \
217 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
219 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
222 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
226 $(start-sanitize-chill
)
227 CHILLFLAGS
= $(CFLAGS
)
229 CHILL_FOR_TARGET
= ` \
230 if [ -f $${rootme}/../gcc/Makefile ] ; then \
231 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
233 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
236 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
240 $(end-sanitize-chill
)
242 # The use of $$(x_FOR_TARGET) reduces the command line length by not
243 # duplicating the lengthy definition.
244 TARGET_FLAGS_TO_PASS
= \
246 "exec_prefix=$(exec_prefix)" \
247 "against=$(against)" \
248 'CC=$$(CC_FOR_TARGET)' \
249 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
251 $(start-sanitize-chill
)\
252 "CHILLFLAGS=$(CHILLFLAGS)" \
253 'CHILL=$$(CHILL_FOR_TARGET)' \
254 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
255 "CHILL_LIB=$(CHILL_LIB)" \
256 $(end-sanitize-chill
)\
257 'CXX=$$(CXX_FOR_TARGET)' \
258 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
259 "CXXFLAGS=$(CXXFLAGS)" \
260 "MAKEINFO=$(MAKEINFO)" \
261 "INSTALL=$(INSTALL)" \
262 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
263 "INSTALL_DATA=$(INSTALL_DATA)" \
266 # Source files in the main directory.
267 # Files which are included via a config/* Makefile fragment
268 # should *not* be specified here; they're in "ALLDEPFILES".
270 blockframe.c breakpoint.c command.c core.c demangle.c \
271 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
272 main.c printcmd.c gdbtypes.c \
273 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
274 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
275 mem-break.c target.c \
276 dbxread.c coffread.c elfread.c dwarfread.c stabsread.c \
277 ieee-float.c language.c parse.c buildsym.c objfiles.c \
278 minsyms.c mipsread.c maint.c ch-exp.y c-lang.c ch-lang.c m2-lang.c \
279 complaints.c typeprint.c c-typeprint.c ch-typeprint.c m2-typeprint.c \
280 c-valprint.c cp-valprint.c ch-valprint.c m2-valprint.c
282 # Source files in subdirectories (which will be handled separately by
284 # Files which are included via a config/* Makefile fragment
285 # should *not* be specified here; they're in "ALLDEPFILES".
287 ${srcdir}/vx-share
/dbgRpcLib.h \
288 ${srcdir}/vx-share
/ptrace.h \
289 ${srcdir}/vx-share
/vxTypes.h \
290 ${srcdir}/vx-share
/vxWorks.h \
291 ${srcdir}/vx-share
/wait.h \
292 ${srcdir}/vx-share
/xdr_ld.h \
293 ${srcdir}/vx-share
/xdr_ptrace.h \
294 ${srcdir}/vx-share
/xdr_rdb.h \
295 ${srcdir}/nindy-share
/b.out.h \
296 ${srcdir}/nindy-share
/block_io.h \
297 ${srcdir}/nindy-share
/coff.h \
298 ${srcdir}/nindy-share
/demux.h \
299 ${srcdir}/nindy-share
/env.h \
300 ${srcdir}/nindy-share
/stop.h \
301 ${srcdir}/nindy-share
/ttycntl.h \
302 ${srcdir}/29k-share
/udi_soc
304 # Source files in sub-subdirectories. We need to know this because we
305 # make relative symlinks with them.
307 ${srcdir}/29k-share
/udi
/udiphcfg.h \
308 ${srcdir}/29k-share
/udi
/udiphsun.h \
309 ${srcdir}/29k-share
/udi
/udiproc.h \
310 ${srcdir}/29k-share
/udi
/udipt29k.h \
311 ${srcdir}/29k-share
/udi
/udiptcfg.h \
312 ${srcdir}/29k-share
/udi
/udisoc.h
314 # Non-source files in subdirs, that should go into gdb.tar.Z.
316 ${srcdir}/nindy-share
/Makefile \
317 ${srcdir}/nindy-share
/VERSION \
318 ${srcdir}/nindy-share
/README \
319 ${srcdir}/vx-share
/README
321 # All source files that go into linking GDB, except config-specified files.
322 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
) $(SFILES_SUBSUBDIR
)
324 # All source files that lint should look at
325 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
327 # Any additional files specified on these lines should also be added to
328 # the OTHERS = definition below, so they go in the tar files.
329 SFILES_STAND
= $(SFILES
) standalone.c
330 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
332 # Header files that are not named in config/* Makefile fragments go here.
333 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h \
334 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
335 gdb-stabs.h ieee-float.h inferior.h language.h \
336 minimon.h objfiles.h parser-defs.h partial-stab.h \
337 serial.h signals.h solib.h symfile.h symtab.h stabsread.h \
338 target.h terminal.h typeprint.h xcoffsolib.h value.h \
339 tm-68k.h tm-hppa.h tm-i960.h tm-sparc.h tm-sunos.h tm-sysv4.h \
340 xm-m68k.h xm-sparc.h xm-sysv4.h xm-vax.h \
342 c-lang.h ch-lang.h m2-lang.h complaints.h \
346 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
348 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
349 POSSLIBS
= $(POSSLIBS_MAINDIR
)
351 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
353 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
354 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
355 README TODO TAGS NEWS Projects \
356 .gdbinit COPYING
$(YYFILES
) \
357 copying.c Convex.notes copying.awk \
358 saber.suppress standalone.c stuff.c kdb-start.c \
361 # Subdirectories of gdb, which should be included in their entirety in
363 TARDIRS
= doc sparclite
# tests
365 # GDB "info" files, which should be included in their entirety
366 INFOFILES
= gdb.
info*
368 DEPFILES
= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
370 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
371 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
372 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
373 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
374 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
376 OBS
= version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
377 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
378 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
379 command.o utils.o expprint.o environ.o gdbtypes.o \
380 copying.o
$(DEPFILES
) mem-break.o target.o \
381 ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
382 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
383 dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
384 stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
385 typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
386 c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o
388 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
392 NTSOBS
= standalone.o
394 TSSTART
= /lib
/crt0.o
396 NTSSTART
= kdb-start.o
398 SUBDIRS
= doc testsuite
400 # For now, shortcut the "configure GDB for fewer languages" stuff.
401 YYFILES
= c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
402 YYOBJ
= c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
404 # Prevent Sun make from putting in the machine type. Setting
405 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
407 ${CC} -c
${INTERNAL_CFLAGS} $<
410 $(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
411 rootme
=`pwd`; export rootme
; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) DO
=all DODIRS
=testsuite subdir_do
413 ..
/dejagnu
/runtest
-to gdb
$(DGFLAGS
)
416 $(MAKE
) $(FLAGS_TO_PASS
) DO
=info "DODIRS=$(SUBDIRS)" subdir_do
418 $(MAKE
) $(FLAGS_TO_PASS
) DO
=install-info
"DODIRS=$(SUBDIRS)" subdir_do
420 $(MAKE
) $(FLAGS_TO_PASS
) DO
=clean-info
"DODIRS=$(SUBDIRS)" subdir_do
423 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
424 pack gdb.t
; rm -f gdb.t
428 -parent
=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
429 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
430 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; fi
431 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
432 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
433 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; fi
434 -n
=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
435 $(INSTALL_PROGRAM
) gdb
$(bindir)/$$n; \
436 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$$n.1
438 $(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
440 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
441 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
443 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
444 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
445 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
447 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
448 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
449 #load ./init.c $(SFILES)
450 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
451 #unload ${srcdir}/vx-share/*.h
452 #unload ${srcdir}/nindy-share/[A-Z]*
453 #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
454 #load copying.c version.c
455 #load ../opcodes/libopcodes.a
456 #load ../libiberty/libiberty.a
457 #load ../bfd/libbfd.a
458 #load ../readline/libreadline.a
459 #load ../mmalloc/libmmalloc.a
461 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
462 echo
"Load .c corresponding to:" $(DEPFILES
)
465 # This is useful when debugging GDB, because some Unix's don't let you run GDB
466 # on itself without copying the executable. So "make gdb1" will make
467 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
468 # Removing gdb1 before the copy is the right thing if gdb1 is open
469 # in another process.
474 # This is a remote stub which runs under unix and starts up an
475 # inferior process. This is at least useful for debugging GDB's
479 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
480 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
482 # Support for building Makefile out of configured pieces, automatically
483 # generated dependencies, etc. alldeps.mak is a file that contains
484 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
485 # ALLDEPFILES_SUBDIR, ALLDEPFILES_SUBSUBDIR, ALLPARAM, and ALLCONFIG,
486 # all cadged from the current contents of the config subdirectory.
488 alldeps.mak
: ${srcdir}/config
489 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
490 for i in
`ls -d ${srcdir}/config/*.m[ht]` ; do \
491 echo
$$i >>allconfig.tmp
; \
493 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
494 || $$1 == "NATDEPFILES=" { \
495 for (i = 2; i <= NF; i++) \
496 print $$i >> "alldeps.tmp" ; \
498 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
499 print $$2 >> "allparam.tmp" }' ; \
501 sort <alldeps.tmp | uniq | \
502 sed
-e
's/arm-convert.o/arm-convert.s/' \
503 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
504 -e
's!^nindy.o!nindy-share/nindy.c!' \
505 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
506 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
507 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
508 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
509 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
510 -e
's!udr.o!29k-share/udi/udr.c!' \
511 -e
's!udip2soc.o!29k-share/udi/udip2soc.c!' \
514 echo
'# Start of "alldeps.mak" definitions' \
516 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR) $$(ALLDEP_FILES_SUBSUBDIR)' \
518 grep
-v
/ alldeps2.tmp | \
519 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
520 NR == 0 {printf $$0;} \
521 NR != 0 {printf "\\\n" $$0} \
522 END {printf "\n\n"}' >>alldeps.mak
;
523 grep
/ alldeps2.tmp | grep
-v
'/.*/' | \
524 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
525 NR == 0 {printf $$0;} \
526 NR != 0 {printf "\\\n" $$0} \
527 END {printf "\n\n"}' >>alldeps.mak
;
528 grep
'/.*/' alldeps2.tmp | \
529 awk
'BEGIN {printf "ALLDEPFILES_SUBSUBDIR="} \
530 NR == 0 {printf $$0;} \
531 NR != 0 {printf "\\\n" $$0} \
532 END {printf "\n\n"}' >>alldeps.mak
;
533 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
534 NR == 0 {printf $$0;} \
535 NR != 0 {printf "\\\n" $$0} \
536 END {printf "\n\n"}' >>alldeps.mak
;
537 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
538 NR == 0 {printf $$0;} \
539 NR != 0 {printf "\\\n" $$0} \
540 END {printf "\n\n"}' >>alldeps.mak
;
541 echo
'# End of "alldeps.mak" definitions' \
543 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
545 # The sed script makes everything which depends on {x,t}m.h depend on
546 # config.status as well, in case someone reconfigures gdb out from
547 # under an already compiled gdb.
548 depend
: $(SOURCES
) Makefile.in
549 @echo Ignore errors about non-existent system-supplied
include files
550 @echo for systems other than the one you are using.
551 @echo Also ignore parse errors in valops.c
, and any errors in
554 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
555 -I
${READLINE_DIR} $(INCLUDE_CFLAGS
) \
556 `ls $(SOURCES) | grep -v '\.[hy]$$' | \
558 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
559 # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
560 # by the various subdirectories.
561 if
[ "${srcdir}" = "." ] ; then \
563 -e
's; ./xm.h; xm.h;g' \
564 -e
's; ./tm.h; tm.h;g' \
565 -e
's; ./nm.h; nm.h;g' \
566 -e
's; \./; $${srcdir}/;g' \
567 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
568 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
569 -e
's; 29k-share/; $${srcdir}/29k-share/;g' \
572 mv depend.tm2 depend.tmp
; \
575 -e
's; [xt]m.h;& config.status;g' \
576 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
577 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
578 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
579 -e
's; ./xm.h; xm.h config.status;g' \
580 -e
's; ./tm.h; tm.h config.status;g' \
581 -e
's; ./nm.h; nm.h config.status;g' \
586 @echo
"You must configure gdb. Look at the README file for details."
589 # This checks the configure.in file versus the config/ directory.
590 config-check
: config-check-hosts config-check-targets
592 grep gdb_host
= ${srcdir}/configure.in | \
593 sed
-e
's/.*gdb_host=//' -e
's/ ;;$$/.mh/' |
sort -u
>HOSTconf.o
594 (cd
${srcdir}/config
; ls
*.mh
) >HOSTdir.o
595 diff
-u HOSTconf.o HOSTdir.o
597 config-check-targets
:
598 grep gdb_target
= ${srcdir}/configure.in | \
599 sed
-e
's/.*gdb_target=//' -e
's/ ;;$$/.mh/' |
sort -u
>TARGconf.o
600 (cd
${srcdir}/config
; ls
*.mt
) >TARGdir.o
601 diff
-u HOSTconf.o HOSTdir.o
603 # These are not generated by "make depend" because they only are there
605 # But these rules don't do what we want; we want to hack the foo.o: tm.h
606 # dependency to do the right thing.
607 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
608 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
609 xm-news1000.h
: xm-news.h
610 xm-i386-sv32.h
: xm-i386.h
611 tm-i386gas.h
: tm-i386.h
612 xm-sun4os4.h
: xm-sparc.h
613 tm-sun4os4.h
: tm-sparc.h
614 xm-vaxult.h
: xm-vax.h
615 xm-vaxbsd.h
: xm-vax.h
617 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
619 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
620 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
621 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
624 # Put the proper machine-specific files first.
625 # createtags will edit the .o in DEPFILES into .c
627 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} ${NAT_FILE} \
628 $(DEPFILES
) ${TAGFILES}
631 # Making distributions of GDB and friends.
633 # Make a directory `proto-gdb.dir' that contains an image of the GDB
634 # directory of the distribution, built up with symlinks.
635 make-proto-gdb.
dir: force_update
636 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
637 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
639 # Make a tar file containing the GDB directory of the distribution.
640 gdb.
tar.Z
: force_update
641 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
642 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
644 # Update the "alldeps.mak" file in a source directory.
645 update-alldeps
: force_update
646 ..
/configure none
-norecursion
648 $(MAKE
) $(MFLAGS
) alldeps.mak
650 # Update the "depend" and "alldeps.mak" files in a source directory.
651 # We update alldeps.mak first, since it is used to generate the list
652 # of files to be checked for dependencies.
653 update-depend
: update-alldeps force_update
654 ..
/configure none
-norecursion
656 $(MAKE
) $(MFLAGS
) depend
658 # Set up the GDB source directory for distribution, by building all files that
659 # are products of other files.
660 setup-to-dist
: update-depend force_update
662 (cd doc
; $(MAKE
) $(MFLAGS
) GDBvn.texi
)
663 $(MAKE
) $(MFLAGS
) gdb.
info
664 $(MAKE
) $(MFLAGS
) refcard.ps
666 # Build a tar file from a proto-gdb.dir.
667 gdb-
$(VERSION
).
tar.Z
: force_update
668 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
669 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
670 ln
-s proto-gdb.
dir $(DIST
)
671 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
672 rm -rf
$(DIST
) proto-gdb.
dir
674 # Build a proto-gdb.dir after GDB has been set up for distribution.
675 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
676 # built in the setup-to-dist process, since it defines things like ALLCONFIG
677 # and ALLDEPFILES, that we need.
678 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
681 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
682 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
683 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
684 (mkdir
$$i; cd
$$i; \
685 ln
-s ..
/..
/$$i/* .
; \
686 rm -rf SCCS CVS.adm RCS config.status
; \
687 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
;); done
688 mkdir proto-gdb.
dir/config
689 cd proto-gdb.
dir/config
; \
690 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
691 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
692 mkdir proto-gdb.
dir/29k-share proto-gdb.
dir/29k-share
/udi
693 cd proto-gdb.
dir/config
; \
694 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
695 do ln
-s ..
/..
/$$i ..
/$$i ; done
696 cd proto-gdb.
dir/config
; \
697 for i in
$(SFILES_SUBSUBDIR
) $(ALLDEPFILES_SUBSUBDIR
); \
698 do ln
-s ..
/..
/..
/$$i ..
/$$i ; done
699 chmod og
=u
`find . -print`
702 rm -f
*.o
${ADD_FILES} *~
703 rm -f init.c version.c
704 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
706 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(SUBDIRS)" subdir_do
708 distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
709 rm -f tm.h xm.h config.status
710 rm -f y.output
yacc.acts
yacc.tmp
711 rm -f
${TESTS} Makefile depend
712 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(SUBDIRS)" subdir_do
715 rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
716 rm -f tm.h xm.h config.status
717 rm -f Makefile depend
718 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=realclean "DODIRS=$(SUBDIRS)" subdir_do
720 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
723 @for i in
$(DODIRS
); do \
724 if
[ -d .
/$$i ] ; then \
726 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
731 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
732 $(SHELL
) .
/config.status
737 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
739 ( cd .
/doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
) )
740 mv .
/doc
/refcard.
dvi .
742 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
744 ( cd .
/doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
) )
745 mv .
/doc
/refcard.ps .
747 # GDB MANUAL: TeX dvi file
749 ( cd .
/doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
) )
752 # GDB MANUAL: info file
754 ( cd .
/doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
) )
757 # Make copying.c from COPYING
758 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
759 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
762 echo
'char *version = "$(VERSION)";' >version.c
764 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
765 # in srcdir, then compiled in target dir to c-exp.tab.o.
766 # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
767 # (some "makes" rewrite the VPATH into command arguments if they match deps).
768 # Remove bogus decls for malloc/realloc/free which conflict with everything
770 c-exp.tab.o
: c-exp.tab.c
771 c-exp.tab.c
: $(srcdir)/c-exp.y
$(srcdir)/Makefile.in
772 @echo
'Expect 4 shift/reduce conflicts.'
773 ${YACC} $(srcdir)/c-exp.y
774 -sed
-e
'/extern.*malloc/d' \
775 -e
'/extern.*realloc/d' \
776 -e
'/extern.*free/d' \
777 -e
'/include.*malloc.h/d' \
778 -e
's/malloc/xmalloc/g' \
779 -e
's/realloc/xrealloc/g' \
780 < y.tab.c
> .
/.
/c-exp.tab.c
783 # start-sanitize-chill
784 # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
785 # in srcdir, then compiled in target dir to ch-exp.tab.o.
786 # Remove bogus decls for malloc/realloc/free which conflict with everything
788 ch-exp.tab.o
: ch-exp.tab.c
789 ch-exp.tab.c
: $(srcdir)/ch-exp.y
$(srcdir)/Makefile.in
790 @echo
'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
791 ${YACC} $(srcdir)/ch-exp.y
792 -sed
-e
'/extern.*malloc/d' \
793 -e
'/extern.*realloc/d' \
794 -e
'/extern.*free/d' \
795 -e
'/include.*malloc.h/d' \
796 -e
's/malloc/xmalloc/g' \
797 -e
's/realloc/xrealloc/g' \
798 < y.tab.c
> .
/.
/ch-exp.tab.c
802 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
803 # in srcdir, then compiled in target dir to m2-exp.tab.o.
804 # Remove bogus decls for malloc/realloc/free which conflict with everything
806 m2-exp.tab.o
: m2-exp.tab.c
807 m2-exp.tab.c
: $(srcdir)/m2-exp.y
$(srcdir)/Makefile.in
808 ${YACC} $(srcdir)/m2-exp.y
809 -sed
-e
'/extern.*malloc/d' \
810 -e
'/extern.*realloc/d' \
811 -e
'/extern.*free/d' \
812 -e
'/include.*malloc.h/d' \
813 -e
's/malloc/xmalloc/g' \
814 -e
's/realloc/xrealloc/g' \
815 < y.tab.c
> .
/.
/m2-exp.tab.c
819 main.o
: ${srcdir}/main.c
820 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
822 # The symbol-file readers have dependencies on BFD header files.
823 dbxread.o
: ${srcdir}/dbxread.c
824 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
826 coffread.o
: ${srcdir}/coffread.c
827 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
829 mipsread.o
: ${srcdir}/mipsread.c
830 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
832 elfread.o
: ${srcdir}/elfread.c
833 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
835 dwarfread.o
: ${srcdir}/dwarfread.c
836 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
838 stabsread.o
: ${srcdir}/stabsread.c
839 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
841 # Used on RS/6000 native
842 xcoffread.o
: ${srcdir}/xcoffread.c
843 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
845 xcoffexec.o
: ${srcdir}/xcoffexec.c
846 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
848 # Used on HP-PA native
849 paread.o
: ${srcdir}/paread.c
850 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/paread.c
852 # Drag in the files that are in another directory.
854 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
855 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
857 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
858 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
860 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
861 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
863 nindy.o
: ${srcdir}/nindy-share
/nindy.c
864 ${CC} -c
${INTERNAL_CFLAGS} -DSTRIP
='"$(tooldir)/bin/strip"' \
865 ${srcdir}/nindy-share
/nindy.c
867 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
868 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
870 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
871 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
873 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
874 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
876 udr.o
: ${srcdir}/29k-share
/udi
/udr.c
877 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udr.c
879 udip2soc.o
: ${srcdir}/29k-share
/udi
/udip2soc.c
880 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udip2soc.c
883 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
884 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
887 cxref -I. $(SFILES) >gdb.cxref
891 # GNU Make has an annoying habit of putting *all* the Makefile variables
892 # into the environment, unless you include this target as a circumvention.
893 # Rumor is that this will be fixed (and this target can be removed)
897 # GNU Make 3.63 has a different problem: it keeps tacking command line
898 # overrides onto the definition of $(MAKE). This variable setting
902 # This is the end of "Makefile.in". When built into "Makefile"
903 # by the configure script, two things are added below this point:
904 # alldeps.mak -- defintions of all files that are used in
905 # host- or target-dependent configurations
906 # depend -- what .o files depend on what .c and .h files,
907 # for all configurations.