1 #Copyright 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 program_transform_name
=
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
25 tooldir
= $(libdir)/$(target_alias
)
27 datadir = $(prefix)/lib
28 mandir = $(prefix)/man
29 man1dir = $(mandir)/man1
30 man2dir = $(mandir)/man2
31 man3dir = $(mandir)/man3
32 man4dir = $(mandir)/man4
33 man5dir = $(mandir)/man5
34 man6dir = $(mandir)/man6
35 man7dir = $(mandir)/man7
36 man8dir = $(mandir)/man8
37 man9dir = $(mandir)/man9
38 infodir = $(prefix)/info
39 includedir = $(prefix)/include
40 docdir
= $(datadir)/doc
45 INSTALL_PROGRAM
= $(INSTALL
)
46 INSTALL_DATA
= $(INSTALL
)
52 # Flags that describe where you can find the termcap library.
53 # This can be overridden in the host Makefile fragment file.
56 # System V: If you compile gdb with a compiler which uses the coff
57 # encapsulation feature (this is a function of the compiler used, NOT
58 # of the m-?.h file selected by config.gdb), you must make sure that
59 # the GNU nm is the one that is used by munch.
61 # If you are compiling with GCC, make sure that either 1) You use the
62 # -traditional flag, or 2) You have the fixed include files where GCC
63 # can reach them. Otherwise the ioctl calls in inflow.c
64 # will be incorrectly compiled. The "fixincludes" script in the gcc
65 # distribution will fix your include files up.
70 # Directory containing source files. Don't clean up the spacing,
71 # this exact string is matched for by the "configure" script.
74 # It is also possible that you will need to add -I/usr/include/sys to the
75 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
76 # is where it should be according to Posix).
78 # If you use bison instead of yacc, it needs to include the "-y" argument.
83 # where to find texinfo; GDB dist should include a recent one
84 TEXIDIR
=${srcdir}/..
/texinfo
86 # where to find makeinfo, preferably one designed for texinfo-2
89 # Set this up with gcc if you have gnu ld and the loader will print out
90 # line numbers for undefinded refs.
94 # Where is the "include" directory? Traditionally ../include or ./include
95 INCLUDE_DIR
= ${srcdir}/..
/include
96 INCLUDE_DEP
= $$(INCLUDE_DIR
)
98 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
99 # or ./mmalloc (When we want the binary library built from it, we use
100 # ${MMALLOC_DIR}${subdir}.)
101 # Note that mmalloc can still be used on systems without mmap().
102 # To use your system malloc, comment out the following defines.
103 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
104 MMALLOC_DEP
= $$(MMALLOC_DIR
)
105 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
106 # To use your system malloc, uncomment MMALLOC_DISABLE.
107 #MMALLOC_DISABLE = -DNO_MMALLOC
108 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
109 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
110 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
112 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
113 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
114 BFD_DIR
= ${srcdir}/..
/bfd
115 BFD_DEP
= $$(BFD_DIR
)
116 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
118 # Where is the source dir for the READLINE library? Traditionally in .. or .
119 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
120 READLINE_DIR
= ${srcdir}/..
/readline
121 READLINE_DEP
= $$(READLINE_DIR
)
122 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
124 # All the includes used for CFLAGS and for lint.
125 # -I. for config files.
126 # -I${srcdir} possibly for regex.h also.
127 # -I${srcdir}/config for more generic config files.
128 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
${srcdir}/config
-I
$(INCLUDE_DIR
)
130 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
131 # from the config/ directory.
132 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
133 #PROFILE_CFLAGS = -pg
135 # CFLAGS is specifically reserved for setting from the command line
136 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
138 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
139 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
140 # None of the things in CFLAGS will do any harm, and on some systems
141 # (e.g. SunOS4) it is important to use the MH_CFLAGS.
144 # Where is the "-liberty" library, containing getopt and obstack?
145 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
146 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
148 # Where is the "-lopcodes" library, with (some of) the opcode tables and
150 OPCODES
= .
/..
/opcodes
${subdir}/libopcodes.a
152 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
153 # If your sysyem is missing alloca(), or, more likely, it's there but
154 # it doesn't work, define ALLOCA & ALLOCA1 too.
156 # Libraries and corresponding dependencies for compiling gdb.
157 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
158 # TERMCAP comes after readline, since readline depends on it.
159 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY} \
160 ${XM_CLIBS} ${TM_CLIBS} ${NAT_CLIBS}
161 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${NAT_CDEPS} \
162 ${BFD_LIB} ${RL_LIB} ${OPCODES} ${MMALLOC_LIB} ${LIBIBERTY}
164 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
165 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} ${NAT_ADD_FILES}
171 LINTFLAGS
= -I
${BFD_DIR}
176 # Host and target-dependent makefile fragments come in here.
178 # End of host and target-dependent makefile fragments
182 "exec_prefix=$(exec_prefix)" \
183 "against=$(against)" \
185 "AR_FLAGS=$(AR_FLAGS)" \
188 $(start-sanitize-chill
)\
189 "CHILLFLAGS=$(CHILLFLAGS)" \
191 "CHILL_LIB=$(CHILL_LIB)" \
192 $(end-sanitize-chill
)\
194 "CXXFLAGS=$(CXXFLAGS)" \
196 "MAKEINFO=$(MAKEINFO)" \
197 "INSTALL=$(INSTALL)" \
198 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
199 "INSTALL_DATA=$(INSTALL_DATA)" \
200 "RUNTEST=$(RUNTEST)" \
201 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
204 # Flags that we pass when building the testsuite.
207 if [ -f $${rootme}/../gcc/Makefile ] ; then \
208 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
210 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
213 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
220 if [ -f $${rootme}/../gcc/Makefile ] ; then \
221 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
223 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
226 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
230 $(start-sanitize-chill
)
231 CHILLFLAGS
= $(CFLAGS
)
233 CHILL_FOR_TARGET
= ` \
234 if [ -f $${rootme}/../gcc/Makefile ] ; then \
235 echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../chillrt/; \
237 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
240 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
245 $(end-sanitize-chill
)
247 # The use of $$(x_FOR_TARGET) reduces the command line length by not
248 # duplicating the lengthy definition.
249 TARGET_FLAGS_TO_PASS
= \
251 "exec_prefix=$(exec_prefix)" \
252 "against=$(against)" \
253 'CC=$$(CC_FOR_TARGET)' \
254 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
256 $(start-sanitize-chill
)\
257 "CHILLFLAGS=$(CHILLFLAGS)" \
258 'CHILL=$$(CHILL_FOR_TARGET)' \
259 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
260 "CHILL_LIB=$(CHILL_LIB)" \
261 $(end-sanitize-chill
)\
262 'CXX=$$(CXX_FOR_TARGET)' \
263 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
264 "CXXFLAGS=$(CXXFLAGS)" \
265 "MAKEINFO=$(MAKEINFO)" \
266 "INSTALL=$(INSTALL)" \
267 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
268 "INSTALL_DATA=$(INSTALL_DATA)" \
269 "RUNTEST=$(RUNTEST)" \
270 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
273 # All source files that go into linking GDB, except config-specified files.
274 # Source files which are included via a config/*/* Makefile fragment should
275 # *not* be specified here; they're in "ALLDEPFILES".
276 SFILES
= blockframe.c breakpoint.c buildsym.c c-exp.y c-lang.c c-typeprint.c \
277 c-valprint.c ch-exp.y ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
278 command.c complaints.c core.c cp-valprint.c dbxread.c demangle.c \
279 dwarfread.c elfread.c environ.c eval.c expprint.c findvar.c gdbtypes.c \
280 infcmd.c inflow.c infrun.c language.c m2-exp.y m2-lang.c m2-typeprint.c \
281 m2-valprint.c main.c maint.c mem-break.c minsyms.c mipsread.c \
282 objfiles.c parse.c printcmd.c remote.c source.c stabsread.c stack.c \
283 symfile.c symmisc.c symtab.c target.c typeprint.c utils.c valarith.c \
284 valops.c valprint.c values.c serial.c ser-hardwire.c
286 # Files that are not source code, but need to go into gdb-$(VERSION).tar.Z.
287 NONSRC
= Makefile.in depend alldeps.mak createtags munch configure.in \
288 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps README TODO \
289 TAGS NEWS Projects .gdbinit COPYING
$(YYFILES
) copying.c copying.awk \
290 saber.suppress standalone.c stuff.c kdb-start.c putenv.c gcc.patch \
291 ${srcdir}/nindy-share
/Makefile
${srcdir}/nindy-share
/VERSION \
292 ${srcdir}/nindy-share
/README
${srcdir}/vx-share
/README \
293 ${srcdir}/config
/convex
/Convex.notes
295 # All source files that lint should look at
296 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
298 # Any additional files specified on these lines should also be added to
299 # the NONSRC definition, so they go in the tar files.
300 SFILES_STAND
= $(SFILES
) standalone.c
301 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
303 # Header files that are not named in config/*/* Makefile fragments go here.
304 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h environ.h \
305 expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h gdb-stabs.h \
306 inferior.h language.h minimon.h objfiles.h parser-defs.h \
307 partial-stab.h serial.h signals.h solib.h symfile.h symtab.h \
308 stabsread.h target.h terminal.h typeprint.h xcoffsolib.h value.h \
309 c-lang.h ch-lang.h m2-lang.h complaints.h ns32k-opcode.h valprint.h \
310 config
/m68k
/tm-m68k.h config
/pa
/tm-hppa.h \
311 config
/i960
/tm-i960.h config
/sparc
/tm-sparc.h config
/tm-sunos.h \
312 config
/tm-sysv4.h config
/m68k
/xm-m68k.h config
/sparc
/xm-sparc.h \
313 config
/xm-sysv4.h config
/vax
/xm-vax.h config
/nm-trash.h \
314 ${srcdir}/29k-share
/udi
/udiphcfg.h
${srcdir}/29k-share
/udi
/udiphsun.h \
315 ${srcdir}/29k-share
/udi
/udiproc.h
${srcdir}/29k-share
/udi
/udipt29k.h \
316 ${srcdir}/29k-share
/udi
/udiptcfg.h
${srcdir}/29k-share
/udi
/udisoc.h \
317 ${srcdir}/29k-share
/udi_soc
${srcdir}/nindy-share
/b.out.h \
318 ${srcdir}/nindy-share
/block_io.h
${srcdir}/nindy-share
/coff.h \
319 ${srcdir}/nindy-share
/demux.h
${srcdir}/nindy-share
/env.h \
320 ${srcdir}/nindy-share
/stop.h
${srcdir}/nindy-share
/ttycntl.h \
321 ${srcdir}/vx-share
/dbgRpcLib.h
${srcdir}/vx-share
/ptrace.h \
322 ${srcdir}/vx-share
/vxTypes.h
${srcdir}/vx-share
/vxWorks.h \
323 ${srcdir}/vx-share
/wait.h
${srcdir}/vx-share
/xdr_ld.h \
324 ${srcdir}/vx-share
/xdr_ptrace.h
${srcdir}/vx-share
/xdr_rdb.h
326 # GDB "info" files, which should be included in their entirety
327 INFOFILES
= gdb.
info*
329 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c sparc-stub.c rem-multi.
shar
331 POSSLIBS
= regex.c regex.h alloca.c
333 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
335 # Subdirectories of gdb, which should be included in their entirety in
337 TARDIRS
= doc sparclite
# tests
339 DEPFILES
= ${TDEPFILES} ${XDEPFILES} ${NATDEPFILES}
341 SOURCES
= $(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
342 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
344 TARFILES
= ${SFILES} ${HFILES} ${NONSRC} ${ALLDEPFILES} $(ALLCONFIG
) \
345 $(ALLPARAM
) $(INFOFILES
) ${POSSLIBS} ${REMOTE_EXAMPLES}
347 OBS
= version.o main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
348 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
349 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
350 command.o utils.o expprint.o environ.o gdbtypes.o \
351 copying.o
$(DEPFILES
) mem-break.o target.o \
352 putenv.o parse.o language.o
$(YYOBJ
) \
353 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
354 dbxread.o coffread.o elfread.o dwarfread.o mipsread.o \
355 stabsread.o core.o c-lang.o ch-lang.o m2-lang.o complaints.o \
356 typeprint.o c-typeprint.o ch-typeprint.o m2-typeprint.o \
357 c-valprint.o cp-valprint.o ch-valprint.o m2-valprint.o \
358 serial.o ser-hardwire.o
360 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
364 NTSOBS
= standalone.o
366 TSSTART
= /lib
/crt0.o
368 NTSSTART
= kdb-start.o
370 SUBDIRS
= doc testsuite
372 # For now, shortcut the "configure GDB for fewer languages" stuff.
373 YYFILES
= c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
374 YYOBJ
= c-exp.tab.o m2-exp.tab.o ch-exp.tab.o
376 # Prevent Sun make from putting in the machine type. Setting
377 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
379 ${CC} -c
${INTERNAL_CFLAGS} $<
382 $(MAKE
) $(FLAGS_TO_PASS
) DO
=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
386 rootme
=`pwd`; export rootme
; $(MAKE
) $(TARGET_FLAGS_TO_PASS
) DO
=check DODIRS
=testsuite subdir_do
388 $(MAKE
) $(FLAGS_TO_PASS
) DO
=$@
"DODIRS=$(SUBDIRS)" subdir_do
390 $(MAKE
) $(FLAGS_TO_PASS
) DO
=install-info
"DODIRS=$(SUBDIRS)" subdir_do
392 $(MAKE
) $(FLAGS_TO_PASS
) DO
=clean-info
"DODIRS=$(SUBDIRS)" subdir_do
395 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
396 pack gdb.t
; rm -f gdb.t
400 -parent
=`echo $(bindir)|sed -e 's@/[^/]*$$@@'`; \
401 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
402 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; fi
403 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
404 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; fi
405 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; fi
406 -n
=`t='$(program_transform_name)'; echo gdb | sed -e "" $$t`; \
407 $(INSTALL_PROGRAM
) gdb
$(bindir)/$$n; \
408 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$$n.1
410 $(MAKE
) DO
=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS
) subdir_do
412 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
413 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
415 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
416 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
417 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
419 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
420 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
421 #load ./init.c $(SFILES)
422 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/ch-exp.y
423 #unload ${srcdir}/vx-share/*.h
424 #unload ${srcdir}/nindy-share/[A-Z]*
425 #load c-exp.tab.c m2-exp.tab.c ch-exp.tab.c
426 #load copying.c version.c
427 #load ../opcodes/libopcodes.a
428 #load ../libiberty/libiberty.a
429 #load ../bfd/libbfd.a
430 #load ../readline/libreadline.a
431 #load ../mmalloc/libmmalloc.a
433 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
434 echo
"Load .c corresponding to:" $(DEPFILES
)
437 # This is useful when debugging GDB, because some Unix's don't let you run GDB
438 # on itself without copying the executable. So "make gdb1" will make
439 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
440 # Removing gdb1 before the copy is the right thing if gdb1 is open
441 # in another process.
446 # This is a remote stub which runs under unix and starts up an
447 # inferior process. This is at least useful for debugging GDB's
451 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
452 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
454 # Support for building Makefile out of configured pieces, automatically
455 # generated dependencies, etc. alldeps.mak is a file that contains
456 # "make" variable definitions for all ALLDEPFILES, ALLPARAM, and ALLCONFIG,
457 # all cadged from the current contents of the config subtree.
460 rm -f alldeps.mak alldeps
*.tmp allparam
*.tmp allconfig
*.tmp
461 for i in
`find ${srcdir}/config -name '*.m[ht]'` ; do \
462 echo
$$i >>allconfig.tmp
; \
464 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" \
465 || $$1 == "NATDEPFILES=" { \
466 for (i = 2; i <= NF; i++) \
467 print $$i >> "alldeps.tmp" ; \
469 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" || $$1 == "NAT_FILE=" { \
470 print $$2 >> "allparam.tmp" }' ; \
472 sort <alldeps.tmp | uniq | \
473 sed
-e
's/arm-convert.o/arm-convert.s/' \
474 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
475 -e
's!^nindy.o!nindy-share/nindy.c!' \
476 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
477 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
478 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
479 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
480 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
481 -e
's!udr.o!29k-share/udi/udr.c!' \
482 -e
's!udip2soc.o!29k-share/udi/udip2soc.c!' \
484 -e
'/..\/opcodes\//d' \
487 for i in
`cat allparam.tmp` ; do \
488 find
${srcdir}/config
-name
$$i -print >>allparam2.tmp
; \
490 echo
'# Start of "alldeps.mak" definitions' >>alldeps.mak
;
491 sort <alldeps2.tmp | uniq | awk
'BEGIN {printf "ALLDEPFILES="} \
492 NR == 0 {printf $$0;} \
493 NR != 0 {printf "\\\n" $$0} \
494 END {printf "\n\n"}' >>alldeps.mak
;
495 sort <allparam2.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
496 NR == 0 {printf $$0;} \
497 NR != 0 {printf "\\\n" $$0} \
498 END {printf "\n\n"}' >>alldeps.mak
;
499 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
500 NR == 0 {printf $$0;} \
501 NR != 0 {printf "\\\n" $$0} \
502 END {printf "\n\n"}' >>alldeps.mak
;
503 echo
'# End of "alldeps.mak" definitions' >>alldeps.mak
;
504 rm -f alldeps
*.tmp allparam
*.tmp allconfig
*.tmp
506 # The sed script makes everything which depends on {x,t}m.h depend on
507 # config.status as well, in case someone reconfigures gdb out from
508 # under an already compiled gdb.
509 depend
: $(SOURCES
) Makefile.in
510 @echo Ignore errors about non-existent system-supplied
include files
511 @echo for systems other than the one you are using.
512 @echo Also ignore parse errors in valops.c
, and any errors in
515 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
516 -I
${READLINE_DIR} $(INCLUDE_CFLAGS
) \
517 `ls $(SOURCES) | grep -v '\.[hy]$$' | \
519 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
520 # for xm.h, tm.h and nm.h. This allows the same "depend" file to be used
521 # by the various subdirectories.
522 if
[ "${srcdir}" = "." ] ; then \
524 -e
's; ./xm.h; xm.h;g' \
525 -e
's; ./tm.h; tm.h;g' \
526 -e
's; ./nm.h; nm.h;g' \
527 -e
's; \./; $${srcdir}/;g' \
528 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
529 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
530 -e
's; 29k-share/; $${srcdir}/29k-share/;g' \
533 mv depend.tm2 depend.tmp
; \
536 -e
's; [xt]m.h;& config.status;g' \
537 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
538 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
539 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
540 -e
's; ./xm.h; xm.h config.status;g' \
541 -e
's; ./tm.h; tm.h config.status;g' \
542 -e
's; ./nm.h; nm.h config.status;g' \
547 @echo
"You must configure gdb. Look at the README file for details."
550 # This checks the configure.in file versus the config/ directory.
551 config-check
: config-check-hosts config-check-targets
553 grep gdb_host
= ${srcdir}/configure.in | \
554 sed
-e
's/.*gdb_host=//' -e
's/ ;;$$/.mh/' |
sort -u
>HOSTconf.o
555 (cd
${srcdir}/config
; ls
*.mh
) >HOSTdir.o
556 diff
-u HOSTconf.o HOSTdir.o
558 config-check-targets
:
559 grep gdb_target
= ${srcdir}/configure.in | \
560 sed
-e
's/.*gdb_target=//' -e
's/ ;;$$/.mh/' |
sort -u
>TARGconf.o
561 (cd
${srcdir}/config
; ls
*.mt
) >TARGdir.o
562 diff
-u HOSTconf.o HOSTdir.o
564 # These are not generated by "make depend" because they only are there
566 # But these rules don't do what we want; we want to hack the foo.o: tm.h
567 # dependency to do the right thing.
568 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-m68k.h
569 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-m68k.h
570 xm-news1000.h
: xm-news.h
571 xm-i386-sv32.h
: xm-i386.h
572 tm-i386gas.h
: tm-i386.h
573 xm-sun4os4.h
: xm-sparc.h
574 tm-sun4os4.h
: tm-sparc.h
575 xm-vaxult.h
: xm-vax.h
576 xm-vaxbsd.h
: xm-vax.h
578 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
580 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
581 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
582 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
585 # Put the proper machine-specific files first.
586 # createtags will edit the .o in DEPFILES into .c
588 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} ${NAT_FILE} \
589 $(DEPFILES
) ${TAGFILES}
592 # Making distributions of GDB and friends.
594 # Make a tar file containing the GDB directory of the distribution.
595 gdb.
tar.Z
: force_update
596 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
597 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
599 # Make a directory `proto-gdb.dir' that contains an image of the GDB
600 # directory of the distribution, built up with symlinks. Note that this
601 # make target is not directly referenced by any other rules in this makefile,
602 # it is referenced by the makefile in the parent directory.
603 make-proto-gdb.
dir: force_update
604 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
605 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
607 # Set up the GDB source directory for distribution, by building all files that
608 # are products of other files.
609 setup-to-dist
: update-depend force_update
611 (cd doc
; $(MAKE
) $(MFLAGS
) GDBvn.texi
)
612 $(MAKE
) $(MFLAGS
) gdb.
info
613 $(MAKE
) $(MFLAGS
) refcard.ps
615 # Update the "depend" and "alldeps.mak" files in a source directory.
616 # We update alldeps.mak first, since it is used to generate the list
617 # of files to be checked for dependencies.
618 update-depend
: update-alldeps force_update
619 ..
/configure none
-norecursion
621 $(MAKE
) $(MFLAGS
) depend
623 # Update the "alldeps.mak" file in a source directory.
624 update-alldeps
: force_update
625 ..
/configure none
-norecursion
627 $(MAKE
) $(MFLAGS
) alldeps.mak
629 # Build a tar file from a proto-gdb.dir.
630 gdb-
$(VERSION
).
tar.Z
: force_update
631 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
632 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
633 ln
-s proto-gdb.
dir $(DIST
)
634 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
635 rm -rf
$(DIST
) proto-gdb.
dir
637 # Build a proto-gdb.dir after GDB has been set up for distribution.
638 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
639 # built in the setup-to-dist process, since it defines things like ALLCONFIG
640 # and ALLDEPFILES, that we need.
641 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
644 rootme
=`pwd`/ ; export rootme
; \
645 for i in
`echo ${TARDIRS}`; do \
646 (cd proto-gdb.
dir ; \
649 ln
-s
$${rootme}/$$i/* .
; \
650 rm -rf SCCS CVS CVS.adm RCS config.status
; \
651 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
;); \
653 for i in
`echo ${TARFILES}`; do \
654 (cd proto-gdb.
dir ; \
656 if
test -d
$$dir; then true
; else mkdir
-p
$$dir; fi
; \
657 ln
-s
$${rootme}/$$i $$i;); \
659 chmod og
=u
`find . -print`
662 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=clean "DODIRS=$(SUBDIRS)" subdir_do
663 rm -f
*.o
${ADD_FILES} *~
664 rm -f init.c version.c
665 rm -f gdb core make.log
668 distclean: clean c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
669 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=distclean "DODIRS=$(SUBDIRS)" subdir_do
670 rm -f tm.h xm.h config.status
671 rm -f y.output
yacc.acts
yacc.tmp
672 rm -f
${TESTS} Makefile depend
675 @
$(MAKE
) $(FLAGS_TO_PASS
) DO
=realclean "DODIRS=$(SUBDIRS)" subdir_do
676 rm -f c-exp.tab.c m2-exp.tab.c ch-exp.tab.c TAGS
677 rm -f tm.h xm.h config.status
678 rm -f Makefile depend
680 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
683 @for i in
$(DODIRS
); do \
684 if
[ -d .
/$$i ] ; then \
686 $(MAKE
) $(FLAGS_TO_PASS
) $(DO
)) ; then true
; \
691 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
692 $(SHELL
) .
/config.status
697 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
699 ( cd .
/doc
; $(MAKE
) refcard.
dvi $(FLAGS_TO_PASS
) )
700 mv .
/doc
/refcard.
dvi .
702 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
704 ( cd .
/doc
; $(MAKE
) refcard.ps
$(FLAGS_TO_PASS
) )
705 mv .
/doc
/refcard.ps .
707 # GDB MANUAL: TeX dvi file
709 ( cd .
/doc
; $(MAKE
) gdb.
dvi $(FLAGS_TO_PASS
) )
712 # GDB MANUAL: info file
714 ( cd .
/doc
; $(MAKE
) gdb.
info $(FLAGS_TO_PASS
) )
717 # Make copying.c from COPYING
718 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
719 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
722 echo
'char *version = "$(VERSION)";' >version.c
724 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
725 # in srcdir, then compiled in target dir to c-exp.tab.o.
726 # ././c-exp.tab.c is so the command argument will never match $(srcdir)/c-exp.y
727 # (some "makes" rewrite the VPATH into command arguments if they match deps).
728 # Remove bogus decls for malloc/realloc/free which conflict with everything
730 c-exp.tab.o
: c-exp.tab.c
731 c-exp.tab.c
: $(srcdir)/c-exp.y
$(srcdir)/Makefile.in
732 @echo
'Expect 4 shift/reduce conflicts.'
733 ${YACC} $(srcdir)/c-exp.y
734 -sed
-e
'/extern.*malloc/d' \
735 -e
'/extern.*realloc/d' \
736 -e
'/extern.*free/d' \
737 -e
'/include.*malloc.h/d' \
738 -e
's/malloc/xmalloc/g' \
739 -e
's/realloc/xrealloc/g' \
740 < y.tab.c
> .
/.
/c-exp.tab.c
743 # start-sanitize-chill
744 # ch-exp.tab.c is generated in target dir from ch-exp.y if it doesn't exist
745 # in srcdir, then compiled in target dir to ch-exp.tab.o.
746 # Remove bogus decls for malloc/realloc/free which conflict with everything
748 ch-exp.tab.o
: ch-exp.tab.c
749 ch-exp.tab.c
: $(srcdir)/ch-exp.y
$(srcdir)/Makefile.in
750 @echo
'Expect rules never reduced and {shift,reduce}/reduce conflicts.'
751 ${YACC} $(srcdir)/ch-exp.y
752 -sed
-e
'/extern.*malloc/d' \
753 -e
'/extern.*realloc/d' \
754 -e
'/extern.*free/d' \
755 -e
'/include.*malloc.h/d' \
756 -e
's/malloc/xmalloc/g' \
757 -e
's/realloc/xrealloc/g' \
758 < y.tab.c
> .
/.
/ch-exp.tab.c
762 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
763 # in srcdir, then compiled in target dir to m2-exp.tab.o.
764 # Remove bogus decls for malloc/realloc/free which conflict with everything
766 m2-exp.tab.o
: m2-exp.tab.c
767 m2-exp.tab.c
: $(srcdir)/m2-exp.y
$(srcdir)/Makefile.in
768 ${YACC} $(srcdir)/m2-exp.y
769 -sed
-e
'/extern.*malloc/d' \
770 -e
'/extern.*realloc/d' \
771 -e
'/extern.*free/d' \
772 -e
'/include.*malloc.h/d' \
773 -e
's/malloc/xmalloc/g' \
774 -e
's/realloc/xrealloc/g' \
775 < y.tab.c
> .
/.
/m2-exp.tab.c
779 main.o
: ${srcdir}/main.c
780 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
782 # The symbol-file readers have dependencies on BFD header files.
783 dbxread.o
: ${srcdir}/dbxread.c
784 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
786 coffread.o
: ${srcdir}/coffread.c
787 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
789 mipsread.o
: ${srcdir}/mipsread.c
790 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
792 elfread.o
: ${srcdir}/elfread.c
793 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
795 dwarfread.o
: ${srcdir}/dwarfread.c
796 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
798 stabsread.o
: ${srcdir}/stabsread.c
799 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
801 # Used on RS/6000 native
802 xcoffread.o
: ${srcdir}/xcoffread.c
803 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
805 xcoffexec.o
: ${srcdir}/xcoffexec.c
806 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
808 # Used on HP-PA native
809 paread.o
: ${srcdir}/paread.c
810 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/paread.c
812 # Drag in the files that are in another directory.
814 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
815 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
817 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
818 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
820 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
821 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
823 nindy.o
: ${srcdir}/nindy-share
/nindy.c
824 ${CC} -c
${INTERNAL_CFLAGS} -DSTRIP
='"$(tooldir)/bin/strip"' \
825 ${srcdir}/nindy-share
/nindy.c
827 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
828 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
830 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
831 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
833 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
834 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
836 udr.o
: ${srcdir}/29k-share
/udi
/udr.c
837 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udr.c
839 udip2soc.o
: ${srcdir}/29k-share
/udi
/udip2soc.c
840 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/29k-share
/udi
/udip2soc.c
843 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
844 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
847 cxref -I. $(SFILES) >gdb.cxref
851 # GNU Make has an annoying habit of putting *all* the Makefile variables
852 # into the environment, unless you include this target as a circumvention.
853 # Rumor is that this will be fixed (and this target can be removed)
857 # GNU Make 3.63 has a different problem: it keeps tacking command line
858 # overrides onto the definition of $(MAKE). This variable setting
862 $(start-sanitize-chill)
863 ## This is ugly, but I don't want GNU make to put these variables in
864 ## the environment. Older makes will see this as a set of targets
865 ## with no dependencies and no actions.
866 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
867 $(end-sanitize-chill)
869 # This is the end of "Makefile.in". When built into "Makefile"
870 # by the configure script, two things are added below this point:
871 # alldeps.mak -- defintions of all files that are used in
872 # host- or target-dependent configurations
873 # depend -- what .o files depend on what .c and .h files,
874 # for all configurations.