1 #Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
26 datadir = $(prefix)/lib
27 mandir = $(prefix)/man
28 man1dir = $(mandir)/man1
29 man2dir = $(mandir)/man2
30 man3dir = $(mandir)/man3
31 man4dir = $(mandir)/man4
32 man5dir = $(mandir)/man5
33 man6dir = $(mandir)/man6
34 man7dir = $(mandir)/man7
35 man8dir = $(mandir)/man8
36 man9dir = $(mandir)/man9
37 infodir = $(prefix)/info
38 includedir = $(prefix)/include
39 docdir
= $(datadir)/doc
44 INSTALL_PROGRAM
= $(INSTALL
)
45 INSTALL_DATA
= $(INSTALL
)
51 # Flags that describe where you can find the termcap library.
52 # This can be overridden in the host Makefile fragment file.
55 # System V: If you compile gdb with a compiler which uses the coff
56 # encapsulation feature (this is a function of the compiler used, NOT
57 # of the m-?.h file selected by config.gdb), you must make sure that
58 # the GNU nm is the one that is used by munch.
60 # If you are compiling with GCC, make sure that either 1) You use the
61 # -traditional flag, or 2) You have the fixed include files where GCC
62 # can reach them. Otherwise the ioctl calls in inflow.c
63 # will be incorrectly compiled. The "fixincludes" script in the gcc
64 # distribution will fix your include files up.
69 # Directory containing source files. Don't clean up the spacing,
70 # this exact string is matched for by the "configure" script.
73 # It is also possible that you will need to add -I/usr/include/sys to the
74 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
75 # is where it should be according to Posix).
80 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
81 # Berkeley/Sun don't have quite enough.
85 # where to find texinfo; GDB dist should include a recent one
86 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
88 # where to find makeinfo, preferably one designed for texinfo-2
91 # Set this up with gcc if you have gnu ld and the loader will print out
92 # line numbers for undefinded refs.
96 # Where is the "include" directory? Traditionally ../include or ./include
97 INCLUDE_DIR
= ${srcdir}/..
/include
98 INCLUDE_DEP
= $$(INCLUDE_DIR
)
100 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
101 # or ./mmalloc (When we want the binary library built from it, we use
102 # ${MMALLOC_DIR}${subdir}.)
103 # Note that mmalloc can still be used on systems without mmap().
104 # To use your system malloc, comment out the following defines.
105 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
106 MMALLOC_DEP
= $$(MMALLOC_DIR
)
107 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
108 # To use your system malloc, uncomment MMALLOC_DISABLE.
109 #MMALLOC_DISABLE = -DNO_MMALLOC
110 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
111 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
112 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
114 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
115 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
116 BFD_DIR
= ${srcdir}/..
/bfd
117 BFD_DEP
= $$(BFD_DIR
)
118 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
120 # Where is the source dir for the READLINE library? Traditionally in .. or .
121 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
122 READLINE_DIR
= ${srcdir}/..
/readline
123 READLINE_DEP
= $$(READLINE_DIR
)
124 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
127 ENERGIZE_DIR
= ${srcdir}/energize
128 ENERGIZE_INCLUDES
= -I
${ENERGIZE_DIR}
129 ENERGIZE_LIB
= ${ENERGIZE_DIR}/libconn.a
131 # All the includes used for CFLAGS and for lint.
132 # -I. for config files.
133 # -I${srcdir} possibly for regex.h also.
134 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
)
136 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
137 # from the config/ directory.
138 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
139 #PROFILE_CFLAGS = -pg
141 # CFLAGS is specifically reserved for setting from the command line
142 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
144 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
145 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
146 # None of the things in CFLAGS will do any harm, and on some systems
147 # (e.g. SunOS4) it is important to use the M_CFLAGS.
150 # Where is the "-liberty" library, containing getopt and obstack?
151 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
152 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
154 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
155 # If your sysyem is missing alloca(), or, more likely, it's there but
156 # it doesn't work, define ALLOCA & ALLOCA1 too.
157 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
159 # Libraries and corresponding dependencies for compiling gdb.
160 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
161 # TERMCAP comes after readline, since readline depends on it.
162 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
163 ${XM_CLIBS} ${TM_CLIBS} ${ENERGIZE_LIB}
164 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
165 ${RL_LIB} ${MMALLOC_LIB}
167 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
168 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES} \
175 LINTFLAGS
= -I
${BFD_DIR}
177 # Select the default C++ demangling style to use. The default is "auto",
178 # which allows gdb to attempt to pick an appropriate demangling style for
179 # the executable it has loaded. It can be set to a specific style ("gnu",
180 # "lucid", "cfront", etc) in which case gdb will never attempt to do auto
181 # selection of the style unless you do an explicit "set demangle auto".
182 # To select one of these as the default, set DEMANGLING_STYLE in the
183 # appropriate target dependent makefile fragment.
184 DEMANGLING_STYLE
= "lucid"
186 # Select demangler to use.
187 DEMANGLER
= cplus-dem
189 # Select options to use when compiling ${DEMANGLER}.c.
190 DEMANGLE_OPTS
= -DDEMANGLING_STYLE
=${DEMANGLING_STYLE}
192 # Host and target-dependent makefile fragments come in here.
194 # End of host and target-dependent makefile fragments
196 # Source files in the main directory.
197 # Files which are included via a config/* Makefile fragment
198 # should *not* be specified here; they're in "ALLDEPFILES".
200 blockframe.c breakpoint.c command.c core.c demangle.c \
201 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
202 main.c printcmd.c gdbtypes.c \
203 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
204 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
205 ${DEMANGLER}.c mem-break.c target.c inftarg.c \
206 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
207 ieee-float.c language.c parse.c buildsym.c objfiles.c \
208 minsyms.c mipsread.c maint.c energize.c
210 # Source files in subdirectories (which will be handled separately by
212 # Files which are included via a config/* Makefile fragment
213 # should *not* be specified here; they're in "ALLDEPFILES".
215 ${srcdir}/vx-share
/dbgRpcLib.h \
216 ${srcdir}/vx-share
/ptrace.h \
217 ${srcdir}/vx-share
/reg.h \
218 ${srcdir}/vx-share
/vxTypes.h \
219 ${srcdir}/vx-share
/vxWorks.h \
220 ${srcdir}/vx-share
/wait.h \
221 ${srcdir}/vx-share
/xdr_ld.h \
222 ${srcdir}/vx-share
/xdr_ptrace.h \
223 ${srcdir}/vx-share
/xdr_rdb.h \
224 ${srcdir}/vx-share
/xdr_regs.h \
225 ${srcdir}/nindy-share
/b.out.h \
226 ${srcdir}/nindy-share
/block_io.h \
227 ${srcdir}/nindy-share
/coff.h \
228 ${srcdir}/nindy-share
/demux.h \
229 ${srcdir}/nindy-share
/env.h \
230 ${srcdir}/nindy-share
/stop.h \
231 ${srcdir}/nindy-share
/ttycntl.h
233 # Non-source files in subdirs, that should go into gdb.tar.Z.
235 ${srcdir}/nindy-share
/Makefile \
236 ${srcdir}/nindy-share
/VERSION
238 # All source files that go into linking GDB, except config-specified files.
239 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
241 # All source files that lint should look at
242 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
244 # Any additional files specified on these lines should also be added to
245 # the OTHERS = definition below, so they go in the tar files.
246 SFILES_STAND
= $(SFILES
) standalone.c
247 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
249 # Header files that are not named in config/* Makefile fragments go here.
250 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h demangle.h \
251 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
253 ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
254 serial.h signals.h symfile.h symtab.h solib.h xcoffsolib.h \
255 target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
256 xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h xm-vax.h
258 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
260 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
261 POSSLIBS
= $(POSSLIBS_MAINDIR
)
263 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
265 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
266 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
267 README TODO TAGS WHATS.NEW Projects \
268 .gdbinit COPYING
$(YYFILES
) \
269 copying.c Convex.notes copying.awk \
270 saber.suppress standalone.c stuff.c kdb-start.c \
273 # Subdirectories of gdb, which should be included in their entirety in
275 TARDIRS
= doc
# tests
277 # GDB "info" files, which should be included in their entirety
278 INFOFILES
= gdb.
info*
280 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
282 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
283 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
284 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
285 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
286 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
288 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
289 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
290 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
291 command.o utils.o expprint.o environ.o version.o gdbtypes.o \
292 copying.o
$(DEPFILES
) ${DEMANGLER}.o mem-break.o target.o \
293 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
294 buildsym.o objfiles.o minsyms.o maint.o demangle.o energize.o \
295 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o
297 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
299 TSOBS
= core.o inflow.o
301 NTSOBS
= standalone.o
303 TSSTART
= /lib
/crt0.o
305 NTSSTART
= kdb-start.o
307 SUBDIRS
= doc
${ENERGIZE_DIR}
309 # For now, shortcut the "configure GDB for fewer languages" stuff.
310 YYFILES
= c-exp.tab.c m2-exp.tab.c
311 YYOBJ
= c-exp.tab.o m2-exp.tab.o
313 # Prevent Sun make from putting in the machine type. Setting
314 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
316 ${CC} -c
${INTERNAL_CFLAGS} $<
319 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)"
322 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
324 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)"
326 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)"
329 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
330 pack gdb.t
; rm -f gdb.t
334 $(INSTALL_PROGRAM
) gdb
$(bindir)/$(program_prefix
)gdb
335 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$(program_prefix
)gdb
.1
337 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)"
339 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
340 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
342 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
343 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
344 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
346 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
347 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
348 #load ./init.c $(SFILES)
349 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
350 #unload ${srcdir}/nindy-share/[A-Z]*
351 #load c-exp.tab.c m2-exp.tab.c
352 #load copying.c version.c
353 #load ../libiberty/libiberty.a
354 #load ../bfd/libbfd.a
355 #load ../readline/libreadline.a
356 #load ../mmalloc/libmmalloc.a
358 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
359 echo
"Load .c corresponding to:" $(DEPFILES
)
362 @
(cd
${ENERGIZE_DIR}; \
364 "against=$(against)" \
366 "AR_FLAGS=$(AR_FLAGS)" \
370 "MAKEINFO=$(MAKEINFO)" \
371 "INSTALL=$(INSTALL)" \
372 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
373 "INSTALL_DATA=$(INSTALL_DATA)" \
376 # This is useful when debugging GDB, because some Unix's don't let you run GDB
377 # on itself without copying the executable. So "make gdb1" will make
378 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
379 # Removing gdb1 before the copy is the right thing if gdb1 is open
380 # in another process.
385 # This is a remote stub which runs under unix and starts up an
386 # inferior process. This is at least useful for debugging GDB's
390 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
391 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
393 # Support for building Makefile out of configured pieces, automatically
394 # generated dependencies, etc. alldeps.mak is a file that contains
395 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
396 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
397 # contents of the config subdirectory.
399 alldeps.mak
: ${srcdir}/config
400 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
401 for i in
`ls -d ${srcdir}/config/*.m[ht]` ; do \
402 echo
$$i >>allconfig.tmp
; \
404 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
405 for (i = 2; i <= NF; i++) \
406 print $$i >> "alldeps.tmp" ; \
408 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
409 print $$2 >> "allparam.tmp" }' ; \
411 sort <alldeps.tmp | uniq | \
412 sed
-e
's/arm-convert.o/arm-convert.s/' \
413 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
414 -e
's!^nindy.o!nindy-share/nindy.c!' \
415 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
416 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
417 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
418 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
419 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
420 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
423 echo
'# Start of "alldeps.mak" definitions' \
425 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
427 grep
-v
/ alldeps2.tmp | \
428 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
429 NR == 0 {printf $$0;} \
430 NR != 0 {printf "\\\n" $$0} \
431 END {printf "\n\n"}' >>alldeps.mak
;
432 grep
/ alldeps2.tmp | \
433 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
434 NR == 0 {printf $$0;} \
435 NR != 0 {printf "\\\n" $$0} \
436 END {printf "\n\n"}' >>alldeps.mak
;
437 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
438 NR == 0 {printf $$0;} \
439 NR != 0 {printf "\\\n" $$0} \
440 END {printf "\n\n"}' >>alldeps.mak
;
441 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
442 NR == 0 {printf $$0;} \
443 NR != 0 {printf "\\\n" $$0} \
444 END {printf "\n\n"}' >>alldeps.mak
;
445 echo
'# End of "alldeps.mak" definitions' \
447 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
449 # The sed script makes everything which depends on {x,t}m.h depend on
450 # config.status as well, in case someone reconfigures gdb out from
451 # under an already compiled gdb.
452 depend
: $(SOURCES
) Makefile.in
453 @echo Ignore errors about non-existent system-supplied
include files
454 @echo for systems other than the one you are using.
455 @echo Also ignore parse errors in valops.c
, and any errors in
458 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
459 $(INCLUDE_CFLAGS
) `ls $(SOURCES) | grep -v '\.[hy]$$' | \
461 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
462 # for xm.h and tm.h. This allows the same "depend" file to be used
463 # by the various subdirectories.
464 if
[ "${srcdir}" = "." ] ; then \
466 -e
's; ./xm.h; xm.h;g' \
467 -e
's; ./tm.h; tm.h;g' \
468 -e
's; \./; $${srcdir}/;g' \
469 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
470 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
473 mv depend.tm2 depend.tmp
; \
476 -e
's; [xt]m.h;& config.status;g' \
477 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
478 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
479 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
480 -e
's; ./xm.h; xm.h config.status;g' \
481 -e
's; ./tm.h; tm.h config.status;g' \
486 @echo
"You must configure gdb. Look at the README file for details."
489 # These are not generated by "make depend" because they only are there
491 # But these rules don't do what we want; we want to hack the foo.o: tm.h
492 # dependency to do the right thing.
493 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
494 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
495 xm-news1000.h
: xm-news.h
496 xm-i386-sv32.h
: xm-i386.h
497 tm-i386gas.h
: tm-i386.h
498 xm-sun4os4.h
: xm-sparc.h
499 tm-sun4os4.h
: tm-sparc.h
500 xm-vaxult.h
: xm-vax.h
501 xm-vaxbsd.h
: xm-vax.h
503 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
505 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
506 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
507 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
510 # Put the proper machine-specific files first.
511 # createtags will edit the .o in DEPFILES into .c
513 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
516 # Making distributions of GDB and friends.
518 # Make a directory `proto-gdb.dir' that contains an image of the GDB
519 # directory of the distribution, built up with symlinks.
520 make-proto-gdb.
dir: force_update
521 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
522 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
524 # Make a tar file containing the GDB directory of the distribution.
525 gdb.
tar.Z
: force_update
526 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
527 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
529 # Set up the GDB directory for distribution, by building all files that
530 # are products of other files.
531 setup-to-dist
: force_update
534 $(MAKE
) $(MFLAGS
) alldeps.mak
537 $(MAKE
) $(MFLAGS
) depend
539 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
540 $(MAKE
) $(MFLAGS
) gdb.
info
541 $(MAKE
) $(MFLAGS
) refcard.ps
543 # Build a tar file from a proto-gdb.dir.
544 gdb-
$(VERSION
).
tar.Z
: force_update
545 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
546 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
547 ln
-s proto-gdb.
dir $(DIST
)
548 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
549 rm -rf
$(DIST
) proto-gdb.
dir
551 # Build a proto-gdb.dir after GDB has been set up for distribution.
552 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
553 # built in the setup-to-dist process, since it defines things like ALLCONFIG
554 # and ALLDEPFILES, that we need.
555 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
558 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
559 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
560 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
562 ln
-s ..
/..
/$$i/* .
; \
563 rm -rf SCCS CVS.adm RCS config.status
; \
564 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
; done
565 mkdir proto-gdb.
dir/config
566 cd proto-gdb.
dir/config
; \
567 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
568 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
569 cd proto-gdb.
dir/config
; \
570 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
571 do ln
-s ..
/..
/$$i ..
/$$i ; done
572 chmod og
=u
`find . -print`
575 rm -f
*.o
${ADD_FILES} *~
576 rm -f init.c version.c
577 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
579 @
$(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)"
581 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
582 rm -f tm.h xm.h config.status
583 rm -f y.output
yacc.acts
yacc.tmp
584 rm -f
${TESTS} Makefile depend
585 @
$(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)"
588 rm -f c-exp.tab.c m2-exp.tab.c TAGS
589 rm -f tm.h xm.h config.status
590 rm -f Makefile depend
591 @
$(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)"
593 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
596 @for i in
$(DODIRS
); do \
597 if
[ -d .
/$$i ] ; then \
600 "against=$(against)" \
602 "AR_FLAGS=$(AR_FLAGS)" \
606 "MAKEINFO=$(MAKEINFO)" \
607 "INSTALL=$(INSTALL)" \
608 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
609 "INSTALL_DATA=$(INSTALL_DATA)" \
610 "BISON=$(BISON)" $(DO
)) ; then true
; \
615 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
616 $(SHELL
) .
/config.status
621 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
622 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
623 ( cd .
/doc
; $(MAKE
) refcard.
dvi )
624 mv .
/doc
/refcard.
dvi .
626 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
627 refcard.ps
: $(srcdir)/doc
/refcard.
tex
628 ( cd .
/doc
; $(MAKE
) refcard.ps
)
629 mv .
/doc
/refcard.ps .
631 # GDB MANUAL: TeX dvi file
632 gdb.
dvi: .
/doc
/gdb-all.texi
633 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi )
636 # GDB MANUAL: info file
637 gdb.
info: .
/doc
/gdb-all.texi
638 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
info )
642 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
)
644 # Make copying.c from COPYING
645 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
646 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
649 echo
'char *version = "$(VERSION)";' >version.c
651 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
652 # in srcdir, then compiled in target dir to c-exp.tab.o.
653 # Remove bogus decls for malloc/realloc/free which conflict with everything
655 c-exp.tab.o
: c-exp.tab.c
656 c-exp.tab.c
: $(srcdir)/c-exp.y
657 @echo
'Expect 4 shift/reduce conflicts.'
658 ${YACC} $(srcdir)/c-exp.y
659 -sed
-e
'/extern.*malloc/d' \
660 -e
'/extern.*realloc/d' \
661 -e
'/extern.*free/d' \
662 < y.tab.c
> c-exp.tab.c
665 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
666 # in srcdir, then compiled in target dir to m2-exp.tab.o.
667 m2-exp.tab.o
: m2-exp.tab.c
668 m2-exp.tab.c
: $(srcdir)/m2-exp.y
669 ${YACC} $(srcdir)/m2-exp.y
670 -sed
-e
'/extern.*malloc/d' \
671 -e
'/extern.*realloc/d' \
672 -e
'/extern.*free/d' \
673 < y.tab.c
> m2-exp.tab.c
676 # The symbol-file readers have dependencies on BFD header files.
677 dbxread.o
: ${srcdir}/dbxread.c
678 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
680 coffread.o
: ${srcdir}/coffread.c
681 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
683 mipsread.o
: ${srcdir}/mipsread.c
684 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
686 elfread.o
: ${srcdir}/elfread.c
687 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
689 dwarfread.o
: ${srcdir}/dwarfread.c
690 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
692 xcoffread.o
: ${srcdir}/xcoffread.c
693 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
695 xcoffexec.o
: ${srcdir}/xcoffexec.c
696 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
698 # Drag in the files that are in another directory.
700 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
701 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
703 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
704 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
706 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
707 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
709 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
710 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
712 nindy.o
: ${srcdir}/nindy-share
/nindy.c
713 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/nindy.c
715 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
716 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
718 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
719 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
721 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
722 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
724 energize.o
: ${srcdir}/energize.c
725 ${CC} -c
${INTERNAL_CFLAGS} ${ENERGIZE_INCLUDES} ${srcdir}/energize.c
728 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
729 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
732 cxref -I. $(SFILES) >gdb.cxref
736 # Generate the demangler linked in with gdb. Also create a standalone
737 # demangler if so desired ("make demangle").
739 ${DEMANGLER}.o: ${DEMANGLER}.c
740 ${CC} -c ${INTERNAL_CFLAGS} ${DEMANGLE_OPTS} \
741 `echo
${srcdir}/${DEMANGLER}.c | sed
's,^\./,,'`
743 demangle: ${DEMANGLER}.c
744 ${CC} -o $@ -DMAIN ${INTERNAL_CFLAGS} ${DEMANGLE_OPTS} \
745 `echo
${srcdir}/${DEMANGLER}.c | sed
's,^\./,,'`
747 # GNU Make has an annoying habit of putting *all* the Makefile variables
748 # into the environment, unless you include this target as a circumvention.
749 # Rumor is that this will be fixed (and this target can be removed)
753 # This is the end of "Makefile.in". When built into "Makefile"
754 # by the configure script, two things are added below this point:
755 # alldeps.mak -- defintions of all files that are used in
756 # host- or target-dependent configurations
757 # depend -- what .o files depend on what .c and .h files,
758 # for all configurations.