1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 # Host and target-dependent makefile fragments come in here.
21 # End of host and target-dependent makefile fragments
23 # Destination directory of the software tree build
26 # Place to install binaries in the destination tree.
29 # System V: If you compile gdb with a compiler which uses the coff
30 # encapsulation feature (this is a function of the compiler used, NOT
31 # of the m-?.h file selected by config.gdb), you must make sure that
32 # the GNU nm is the one that is used by munch.
34 # If you are compiling with GCC, make sure that either 1) You use the
35 # -traditional flag, or 2) You have the fixed include files where GCC
36 # can reach them. Otherwise the ioctl calls in inflow.c
37 # will be incorrectly compiled. The "fixincludes" script in the gcc
38 # distribution will fix your include files up.
43 # Directory containing source files. Don't clean up the spacing,
44 # this exact string is matched for by the "configure" script.
47 # It is also possible that you will need to add -I/usr/include/sys to the
48 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
49 # is where it should be according to Posix).
53 YACC
=$(BISON
) $(BISONFLAGS
)
58 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
59 # Berkeley/Sun don't have quite enough.
63 # where to find texinfo; GDB dist should include a recent one
64 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
66 # where to find makeinfo, preferably one designed for texinfo-2
69 # Set this up with gcc if you have gnu ld and the loader will print out
70 # line numbers for undefinded refs.
74 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
75 # (useful for debugging memory allocation problems in gdb). To use your
76 # system malloc, uncomment the following two lines.
78 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
79 GNU_MALLOC
= gmalloc.o mcheck.o mtrace.o
82 # Where is the "include" directory? Traditionally ../include or ./include
83 INCLUDE_DIR
= ${srcdir}/..
/include
84 INCLUDE_DEP
= $$(INCLUDE_DIR
)
86 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
87 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
88 BFD_DIR
= ${srcdir}/..
/bfd
90 BFD_LIB
= $(BFD_DIR
)${subdir}/libbfd.a
92 # Where is the source dir for the READLINE library? Traditionally in .. or .
93 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
94 READLINE_DIR
= ${srcdir}/..
/readline
95 READLINE_DEP
= $$(READLINE_DIR
)
96 RL_LIB
= $(READLINE_DIR
)${subdir}/libreadline.a
98 # All the includes used for CFLAGS and for lint.
99 # -I. for config files.
100 # -I${srcdir} possibly for regex.h also.
101 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
) -I
${srcdir}/vx-share
103 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
105 GLOBAL_CFLAGS
= -g
${TM_CFLAGS} ${XM_CFLAGS}
106 #PROFILE_CFLAGS = -pg
108 CFLAGS
= ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
109 # None of the things in CFLAGS will do any harm, and on some systems
110 # (e.g. SunOS4) it is important to use the M_CFLAGS.
113 # Where is the "-liberty" library, containing getopt and obstack?
114 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
115 LIBIBERTY
= ${LIBIBERTY_DIR}${subdir}/libiberty.a
117 # Flags that describe where you can find the termcap library.
118 # You may need to make other arrangements for USG.
121 # The xconfig file must define REGEX and REGEX1 on USG machines.
122 # If your sysyem is missing alloca(), or, more likely, it's there but
123 # it doesn't work, define ALLOCA & ALLOCA1 too.
124 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
126 # Libraries and corresponding dependencies for compiling gdb.
127 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
128 # TERMCAP comes last, since readline depends on it.
129 CLIBS
= $(XM_CLIBS
) ${TM_CLIBS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB} ${TERMCAP}
130 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
132 ADD_FILES
= ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
133 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
141 # Source files in the main directory.
142 # Files which are included via a tconfig/* or xconfig/* file
143 # should *not* be specified here; they're in "ALLDEPFILES".
145 blockframe.c breakpoint.c command.c core.c \
146 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
148 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
149 utils.c valarith.c valops.c valprint.c values.c expread.y \
150 signame.c cplus-dem.c mem-break.c target.c inftarg.c \
151 dbxread.c coffread.c \
154 # Source files in subdirectories (which will be handled separately by
156 # Files which are included via a tconfig/* or xconfig/* file
157 # should *not* be specified here; they're in "ALLDEPFILES".
159 ${srcdir}/vx-share
/dbgRpcLib.h \
160 ${srcdir}/vx-share
/ptrace.h \
161 ${srcdir}/vx-share
/reg.h \
162 ${srcdir}/vx-share
/vxTypes.h \
163 ${srcdir}/vx-share
/vxWorks.h \
164 ${srcdir}/vx-share
/wait.h \
165 ${srcdir}/vx-share
/xdr_ld.h \
166 ${srcdir}/vx-share
/xdr_ptrace.h \
167 ${srcdir}/vx-share
/xdr_rdb.h \
168 ${srcdir}/vx-share
/xdr_regs.h \
169 ${srcdir}/nindy-share
/b.out.h \
170 ${srcdir}/nindy-share
/block_io.h \
171 ${srcdir}/nindy-share
/coff.h \
172 ${srcdir}/nindy-share
/demux.h \
173 ${srcdir}/nindy-share
/env.h \
174 ${srcdir}/nindy-share
/stop.h \
175 ${srcdir}/nindy-share
/ttycntl.h
177 # Non-source files in subdirs, that should go into gdb.tar.Z.
179 ${srcdir}/nindy-share
/Makefile \
180 ${srcdir}/nindy-share
/VERSION
182 # All source files that go into linking GDB, except config-specified files.
183 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
185 # All source files that lint should look at
186 LINTFILES
= $(SFILES
) expread.tab.c init.c
188 # Any additional files specified on these lines should also be added to
189 # the OTHERS = definition below, so they go in the tar files.
190 SFILES_STAND
= $(SFILES
) standalone.c
191 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
193 # Header files that are not named in tconfig/* or xconfig/* go here.
194 HFILES
= breakpoint.h command.h defs.h environ.h \
195 expression.h frame.h gdbcmd.h gdbcore.h \
196 getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
197 signals.h signame.h symfile.h symtab.h \
198 target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
201 # Header files for machine opcode tables.
202 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
203 # business, since they will be included in the separate includes tar file
204 # rather than in the gdb tar file.
206 OPCODES
= $(OPCODE_DIR
)pn-opcode.h
$(OPCODE_DIR
)np1-opcode.h \
207 $(OPCODE_DIR
)sparc-opcode.h
$(OPCODE_DIR
)vax-opcode.h \
208 $(OPCODE_DIR
)m68k-opcode.h
$(OPCODE_DIR
)ns32k-opcode.h \
209 $(OPCODE_DIR
)convx-opcode.h
$(OPCODE_DIR
)pyr-opcode.h \
210 $(OPCODE_DIR
)mips-opcode.h
$(OPCODE_DIR
)am29k-opcode.h \
211 $(OPCODE_DIR
)arm-opcode.h
$(OPCODE_DIR
)m88k-opcode.h \
212 $(OPCODE_DIR
)tahoe-opcode.h
214 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
216 MALLOCSRC
= gmalloc.c mcheck.c mtrace.c mtrace.awk \
219 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
$(MALLOCSRC
)
220 POSSLIBS
= $(POSSLIBS_MAINDIR
)
222 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
224 # tdesc-lib cannot be named simply tdesc, because if it were, GNU make
225 # would try to make it from tdesc.c.
226 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
227 OTHERS
= Makefile.in depend alldeps.mak \
228 createtags munch configure configure.in \
229 ChangeLog ChangeLog-3.x \
230 README TODO TAGS WHATS.NEW Projects \
231 .gdbinit COPYING expread.tab.c \
232 copying.c Convex.notes copying.awk \
233 saber.suppress standalone.c stuff.c kdb-start.c \
236 # Subdirectories of gdb, which should be included in their entirety in
238 TARDIRS
= doc hp-include
# tests
240 # GDB "info" files, which should be included in their entirety
241 INFOFILES
= gdb.
info*
243 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
245 SOURCES
=$(SFILES
) $(ALLDEPFILES
)
246 TAGFILES
= $(SOURCES
) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
247 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
248 ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
249 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
251 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
252 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
253 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
254 command.o utils.o expread.o expprint.o environ.o version.o \
255 copying.o
$(DEPFILES
) signame.o cplus-dem.o mem-break.o target.o \
256 inftarg.o ieee-float.o putenv.o \
257 dbxread.o coffread.o
# mipsread.o
259 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
261 TSOBS
= core.o inflow.o
263 NTSOBS
= standalone.o
265 TSSTART
= /lib
/crt0.o
267 NTSSTART
= kdb-start.o
269 # Prevent Sun make from putting in the machine type. Setting
270 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
272 ${CC} -c
${CFLAGS} $<
277 cp gdb
$(bindir)/gdb.new
278 mv
$(bindir)/gdb.new
$(bindir)/gdb
281 init.c
: $(srcdir)/munch
$(MUNCH_DEFINE
) $(OBS
) $(TSOBS
)
282 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
284 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
285 ${CC-LD
} $(LDFLAGS
) -o gdb init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) \
286 $(CLIBS
) $(LOADLIBES
)
288 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
289 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
290 #load ./init.c $(SFILES)
291 #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
292 #unload ${srcdir}/nindy-share/[A-Z]*
293 #load ${srcdir}/expread.tab.c
294 #load copying.c version.c
295 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
296 #load ${LIBIBERTY_DIR}/*.c
298 #load ${READLINE_DIR}/*.c
300 ##void mcheck(a) void (*a)(); { }
305 # This is useful when debugging GDB, because some Unix's don't let you run GDB
306 # on itself without copying the executable. So "make gdb1" will make
307 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
308 # Removing gdb1 before the copy is the right thing if gdb1 is open
309 # in another process.
314 # This is a remote stub which runs under unix and starts up an
315 # inferior process. This is at least useful for debugging GDB's
319 ${srcdir}/munch
${RAPP_OBS} > rapp_init.c
320 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
322 # Support for building Makefile out of configured pieces, automatically
323 # generated dependencies, etc. alldeps.mak is a file that contains
324 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
325 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
326 # contents of the xconfig and tconfig subdirectories.
328 alldeps.mak
: ${srcdir}/tconfig
${srcdir}/xconfig
329 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
330 for i in
`ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
331 ${srcdir}/xconfig/*[0-9A-Za-z] | \
332 grep -v RCS | grep -v CVS.adm | grep -v SCCS` ; do \
333 echo
$$i >>allconfig.tmp
; \
335 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
336 for (i = 2; i <= NF; i++) \
337 print $$i >> "alldeps.tmp" ; \
339 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
340 print $$2 >> "allparam.tmp" }' ; \
342 sort <alldeps.tmp | uniq | \
343 sed
-e
's/arm-convert.o/arm-convert.s/' \
344 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
345 -e
's!^nindy.o!nindy-share/nindy.c!' \
346 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
347 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
348 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
349 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
350 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
351 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
354 echo
'# Start of "alldeps.mak" definitions' \
356 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
358 grep
-v
/ alldeps2.tmp | \
359 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
360 NR == 0 {printf $$0;} \
361 NR != 0 {printf "\\\n" $$0} \
362 END {printf "\n\n"}' >>alldeps.mak
;
363 grep
/ alldeps2.tmp | \
364 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
365 NR == 0 {printf $$0;} \
366 NR != 0 {printf "\\\n" $$0} \
367 END {printf "\n\n"}' >>alldeps.mak
;
368 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
369 NR == 0 {printf $$0;} \
370 NR != 0 {printf "\\\n" $$0} \
371 END {printf "\n\n"}' >>alldeps.mak
;
372 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
373 NR == 0 {printf $$0;} \
374 NR != 0 {printf "\\\n" $$0} \
375 END {printf "\n\n"}' >>alldeps.mak
;
376 echo
'# End of "alldeps.mak" definitions' \
378 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
380 # The sed script makes everything which depends on {x,t}m.h depend on
381 # config.status as well, in case someone reconfigures gdb out from
382 # under an already compiled gdb.
383 depend
: $(SOURCES
) Makefile.in
384 @echo Ignore errors about non-existent system-supplied
include files
385 @echo for systems other than the one you are using.
386 @echo
"If xm.h and tm.h don't exist, the error messages saying so"
387 @echo can safely be ignored.
388 @echo Also ignore parse errors in valops.c
, and any errors in
390 -$(GCC
) -MM
$(CFLAGS
) -I
$(BFD_DIR
) \
391 `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
392 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
393 # for xm.h and tm.h. This allows the same "depend" file to be used
394 # by the various subdirectories.
395 if
[ "${srcdir}" = "." ] ; then \
397 -e
's; ./xm.h; xm.h;g' \
398 -e
's; ./tm.h; tm.h;g' \
399 -e
's; \./; $${srcdir}/;g' \
400 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
401 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
404 mv depend.tm2 depend.tmp
; \
407 -e
's; [xt]m.h;& config.status;g' \
408 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
409 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
410 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
411 -e
's; ./xm.h; xm.h config.status;g' \
412 -e
's; ./tm.h; tm.h config.status;g' \
417 @echo
"You must configure gdb. Look at the README file for details."
420 # These are not generated by "make depend" because they only are there
422 # But these rules don't do what we want; we want to hack the foo.o: tm.h
423 # dependency to do the right thing.
424 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
425 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
426 xm-news1000.h
: xm-news.h
427 xm-i386-sv32.h
: xm-i386.h
428 tm-i386gas.h
: tm-i386.h
429 xm-sun4os4.h
: xm-sparc.h
430 tm-sun4os4.h
: tm-sparc.h
432 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
434 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
435 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
436 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
439 # Put the proper machine-specific files first.
440 # createtags will edit the .o in DEPFILES into .c
442 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
445 gdb.
tar.Z
: force_update
448 $(MAKE
) $(MFLAGS
) alldeps.mak
451 $(MAKE
) $(MFLAGS
) depend
453 $(MAKE
) $(MFLAGS
) gdb.
info
454 $(MAKE
) $(MFLAGS
) gdb-
$(VERSION
).
tar.Z
456 gdb-
$(VERSION
).
tar.Z
: ${TARFILES} ${TARDIRS} gdb.
info
457 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
; rm -rf
$(DIST
)
459 cd
$(DIST
) ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
460 cd
$(DIST
) ; ln
-s ..
/${INFOFILES} .
461 cd
$(DIST
); for i in
${TARDIRS}; do \
462 (mkdir
$$i; cd
$$i; \
463 ln
-s ..
/..
/$$i/* .
; \
464 rm -rf SCCS CVS.adm RCS
); done
465 mkdir
$(DIST
)/xconfig
${DIST}/tconfig
466 cd
$(DIST
)/tconfig
; \
467 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
468 mkdir
$(DIST
)/vx-share
$(DIST
)/nindy-share
469 cd
$(DIST
)/tconfig
; \
470 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
471 do ln
-s ..
/..
/$$i ..
/$$i ; done
472 chmod og
=u
`find . -print`
473 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
477 rm -f
${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
478 rm -f init.c init.o version.c
479 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
483 distclean: clean expread.tab.c TAGS
484 rm -f tm.h xm.h config.status
485 rm -f y.output
yacc.acts
yacc.tmp
486 rm -f
${TESTS} Makefile depend
489 rm -f expread.tab.c TAGS
490 rm -f tm.h xm.h config.status
491 rm -f Makefile depend
493 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
495 # Copy the object files from a particular stage into a subdirectory.
498 -mv
-f
$(STAGESTUFF
) stage1
502 -mv
-f
$(STAGESTUFF
) stage2
506 -mv
-f
$(STAGESTUFF
) stage3
511 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
514 - (cd stage1
; mv
-f
* ..
)
518 - (cd stage2
; mv
-f
* ..
)
522 - (cd stage3
; mv
-f
* ..
)
525 Makefile
: $(srcdir)/Makefile.in
$(srcdir)/configure
527 .
/configure
+destdir
=$(destdir
) \
529 `if [ "$(srcdir)" != "." ] ; then echo +subdirs; fi` \
530 $(host
) +target
=$(target
))
535 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
536 refcard.
dvi : $(srcdir)/doc
/refcard.
tex
537 ( cd
$(srcdir)/doc
; make refcard.
dvi )
538 mv
$(srcdir)/doc
/refcard.
dvi .
540 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
541 refcard.ps
: $(srcdir)/doc
/refcard.
tex
542 ( cd
$(srcdir)/doc
; make refcard.ps
)
543 mv
$(srcdir)/doc
/refcard.ps .
545 # GDB MANUAL: TeX dvi file
546 gdb.
dvi : $(srcdir)/doc
/gdb-all.texinfo
$(srcdir)/doc
/rdl-apps.texinfo
547 ( cd
$(srcdir)/doc
; make gdb.
dvi )
548 mv
$(srcdir)/doc
/gdb.
dvi .
550 # GDB MANUAL: info file
551 gdb.
info: $(srcdir)/doc
/gdb-all.texinfo
552 ( cd
$(srcdir)/doc
; make gdb.
info )
553 mv
$(srcdir)/doc
/gdb.
info* .
555 # Make copying.c from COPYING
556 copying.c
: COPYING copying.awk
557 awk
-f copying.awk
< COPYING
> copying.c
559 version.c
: Makefile.in
560 echo
'char *version = "$(VERSION)";' >version.c
562 # expread.tab.c is generated in srcdir from expread.y, then compiled in target
563 # directory to expread.o.
564 ${srcdir}/expread.tab.c
: $(srcdir)/expread.y
565 @echo
'Expect 4 shift/reduce conflicts.'
566 ${YACC} $(srcdir)/expread.y
567 mv y.tab.c
${srcdir}/expread.tab.c
569 expread.o
: ${srcdir}/expread.tab.c defs.h param.h symtab.h \
570 frame.h expression.h value.h command.h
571 $(CC
) -c
${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
572 mv expread.tab.o expread.o
574 # dbxread, coffread, mipsread have dependencies on BFD header files.
575 dbxread.o
: ${srcdir}/dbxread.c
576 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
578 coffread.o
: ${srcdir}/coffread.c
579 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
581 mipsread.o
: ${srcdir}/mipsread.c
582 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
584 # Drag in the files that are in another directory.
586 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
587 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
589 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
590 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
592 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
593 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
595 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
596 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
598 nindy.o
: ${srcdir}/nindy-share
/nindy.c
599 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/nindy.c
601 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
602 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/Onindy.c
604 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
605 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
607 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
608 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
610 tdesc-lib
/libdc.o
: force_update
611 cd tdesc-lib
; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
614 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
)
617 cxref
-I.
$(SFILES
) >gdb.cxref
621 # When used with GDB, the demangler should never look for leading
622 # underscores because GDB strips them off during symbol read-in. Thus
625 cplus-dem.o
: cplus-dem.c
626 ${CC} -c
${CFLAGS} -Dnounderscore \
627 `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
629 # This is the end of "Makefile.in". When built into "Makefile"
630 # by the configure script, two things are added below this point:
631 # alldeps.mak -- defintions of all files that are used in
632 # host- or target-dependent configurations
633 # depend -- what .o files depend on what .c and .h files,
634 # for all configurations.