gdb/Makefile.in

   1 # Copyright (C) 1989-2021 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  17
  18 # Please keep lists in this file sorted alphabetically, with one item per line.
  19 # Here are the general guidelines for ordering files and directories:
  20 #
  21 #   - Files come before directories.
  22 #   - The extensions are not taken into account when comparing filenames, except
  23 #     if the filenames are otherwise equal.
  24 #   - A filename that is a prefix of another one comes before.
  25 #   - Underscores and dashes are treated equally, and come before alphanumeric
  26 #     characters.
  27 #
  28 # For example:
  29 #
  30 # SOME_FILES = \
  31 #       foo.c \
  32 #       foo.h \
  33 #       foo-bar.c \
  34 #       foobar.c \
  35 #       foo/bar.c
  36
  37 prefix = @prefix@
  38 exec_prefix = @exec_prefix@
  39
  40 host_alias = @host_alias@
  41 target_alias = @target_alias@
  42 program_transform_name = @program_transform_name@
  43 bindir = @bindir@
  44 libdir = @libdir@
  45 tooldir = $(libdir)/$(target_alias)
  46
  47 datadir = @datadir@
  48 localedir = @localedir@
  49 mandir = @mandir@
  50 man1dir = $(mandir)/man1
  51 man2dir = $(mandir)/man2
  52 man3dir = $(mandir)/man3
  53 man4dir = $(mandir)/man4
  54 man5dir = $(mandir)/man5
  55 man6dir = $(mandir)/man6
  56 man7dir = $(mandir)/man7
  57 man8dir = $(mandir)/man8
  58 man9dir = $(mandir)/man9
  59 infodir = @infodir@
  60 datarootdir = @datarootdir@
  61 docdir = @docdir@
  62 htmldir = @htmldir@
  63 pdfdir = @pdfdir@
  64 includedir = @includedir@
  65
  66 install_sh = @install_sh@
  67
  68 # This can be referenced by `LIBINTL' as computed by
  69 # ZW_GNU_GETTEXT_SISTER_DIR.
  70 top_builddir = .
  71
  72 SHELL = @SHELL@
  73 EXEEXT = @EXEEXT@
  74
  75 AWK = @AWK@
  76 LN_S = @LN_S@
  77
  78 INSTALL = @INSTALL@
  79 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  80 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  81 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
  82 INSTALL_DATA = @INSTALL_DATA@
  83
  84 DESTDIR =
  85
  86 AR = @AR@
  87 AR_FLAGS = qv
  88 RANLIB = @RANLIB@
  89 DLLTOOL = @DLLTOOL@
  90 WINDRES = @WINDRES@
  91 MIG = @MIG@
  92 STRIP = @STRIP@
  93
  94 XGETTEXT = @XGETTEXT@
  95 GMSGFMT = @GMSGFMT@
  96 MSGMERGE = msgmerge
  97
  98 PACKAGE = @PACKAGE@
  99 CATALOGS = @CATALOGS@
 100
 101 CC = @CC@
 102 CXX = @CXX@
 103 CXX_DIALECT = @CXX_DIALECT@
 104
 105 # Dependency tracking information.
 106 DEPMODE = @CCDEPMODE@
 107 DEPDIR = @DEPDIR@
 108 depcomp = $(SHELL) $(srcdir)/../depcomp
 109
 110 # Directory containing source files.
 111 srcdir = @srcdir@
 112 VPATH = @srcdir@
 113 top_srcdir = @top_srcdir@
 114
 115 include $(srcdir)/silent-rules.mk
 116
 117 # Note that these are overridden by GNU make-specific code below if
 118 # GNU make is used.  The overrides implement dependency tracking.
 119 COMPILE.pre = $(CXX) -x c++ $(CXX_DIALECT)
 120 COMPILE.post = -c -o $@
 121 POSTCOMPILE = @true
 122
 123 # CXXFLAGS is at the very end on purpose, so that user-supplied flags can
 124 # override internal flags.
 125 COMPILE = $(ECHO_CXX) $(COMPILE.pre) $(INTERNAL_CFLAGS) $(CXXFLAGS) \
 126         $(COMPILE.post)
 127
 128 YACC = @YACC@
 129
 130 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 131 # not defined, but ada-lex.c is present, compilation will continue,
 132 # possibly with a warning.
 133 FLEX = flex
 134
 135 YLWRAP = $(srcdir)/../ylwrap
 136
 137 # where to find makeinfo, preferably one designed for texinfo-2
 138 MAKEINFO = @MAKEINFO@
 139 MAKEINFOFLAGS = @MAKEINFOFLAGS@
 140 MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
 141 MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
 142
 143 MAKEHTML = $(MAKEINFO_CMD) --html
 144 MAKEHTMLFLAGS =
 145
 146 # Set this up with gcc if you have gnu ld and the loader will print out
 147 # line numbers for undefined references.
 148 #CC_LD = g++ -static
 149 CC_LD = $(CXX) $(CXX_DIALECT)
 150
 151 # Where is our "include" directory?  Typically $(srcdir)/../include.
 152 # This is essentially the header file directory for the library
 153 # routines in libiberty.
 154 INCLUDE_DIR = $(srcdir)/../include
 155 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 156
 157 # Where is the "-liberty" library?  Typically in ../libiberty.
 158 LIBIBERTY = ../libiberty/libiberty.a
 159
 160 # Where is the CTF library?  Typically in ../libctf.
 161 LIBCTF = @LIBCTF@
 162 CTF_DEPS = @CTF_DEPS@
 163
 164 # Where is the BFD library?  Typically in ../bfd.
 165 BFD_DIR = ../bfd
 166 BFD = $(BFD_DIR)/libbfd.a
 167 BFD_SRC = $(srcdir)/$(BFD_DIR)
 168 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 169
 170 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
 171 # -I../zlib, unless we were configured with --with-system-zlib, in which
 172 # case both are empty.
 173 ZLIB = @zlibdir@ -lz
 174 ZLIBINC = @zlibinc@
 175
 176 # Where is the decnumber library?  Typically in ../libdecnumber.
 177 LIBDECNUMBER_DIR = ../libdecnumber
 178 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 179 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 180 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 181
 182 # Where is the READLINE library?  Typically in ../readline/readline.
 183 READLINE_DIR = ../readline/readline
 184 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 185 READLINE = @READLINE@
 186 READLINE_DEPS = @READLINE_DEPS@
 187 READLINE_CFLAGS = @READLINE_CFLAGS@
 188
 189 # Where is expat?  This will be empty if expat was not available.
 190 LIBEXPAT = @LIBEXPAT@
 191
 192 # Where is lzma?  This will be empty if lzma was not available.
 193 LIBLZMA = @LIBLZMA@
 194
 195 # Where is libbabeltrace? This will be empty if libbabeltrace was not
 196 # available.
 197 LIBBABELTRACE = @LIBBABELTRACE@
 198
 199 # Where is libxxhash? This will be empty if libxxhash was not
 200 # available.
 201 LIBXXHASH = @LIBXXHASH@
 202
 203 # Where is libipt?  This will be empty if libipt was not available.
 204 LIBIPT = @LIBIPT@
 205
 206 # Where is libgmp?
 207 LIBGMP = @LIBGMP@
 208
 209 # Where is libmpfr?  This will be empty if libmpfr was not available.
 210 LIBMPFR = @LIBMPFR@
 211
 212 # GNU source highlight library.
 213 SRCHIGH_LIBS = @SRCHIGH_LIBS@
 214 SRCHIGH_CFLAGS = @SRCHIGH_CFLAGS@
 215
 216 WARN_CFLAGS = @WARN_CFLAGS@
 217 WERROR_CFLAGS = @WERROR_CFLAGS@
 218 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 219 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 220
 221 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
 222 PTHREAD_LIBS = @PTHREAD_LIBS@
 223
 224 DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
 225 DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
 226
 227 RDYNAMIC = @RDYNAMIC@
 228
 229 # Where is the INTL library?  Typically in ../intl.
 230 INTL = @LIBINTL@
 231 INTL_DEPS = @LIBINTL_DEP@
 232 INTL_CFLAGS = @INCINTL@
 233
 234 # Where is the ICONV library?  This will be empty if in libc or not available.
 235 LIBICONV = @LIBICONV@
 236
 237 # Did the user give us a --with-gdb-datadir option?
 238 GDB_DATADIR = @GDB_DATADIR@
 239
 240 # Code signing.
 241 CODESIGN = codesign
 242 CODESIGN_CERT = @CODESIGN_CERT@
 243
 244 # Flags to pass to gdb when invoked with "make run".
 245 GDBFLAGS =
 246
 247 # Helper code from gnulib.
 248 GNULIB_PARENT_DIR = ..
 249 include $(GNULIB_PARENT_DIR)/gnulib/Makefile.gnulib.inc
 250
 251 SUPPORT = ../gdbsupport
 252 LIBSUPPORT = $(SUPPORT)/libgdbsupport.a
 253 INCSUPPORT = -I$(srcdir)/.. -I..
 254
 255 #
 256 # CLI sub directory definitons
 257 #
 258 SUBDIR_CLI_SRCS = \
 259         cli/cli-cmds.c \
 260         cli/cli-decode.c \
 261         cli/cli-dump.c \
 262         cli/cli-interp.c \
 263         cli/cli-logging.c \
 264         cli/cli-option.c \
 265         cli/cli-script.c \
 266         cli/cli-setshow.c \
 267         cli/cli-style.c \
 268         cli/cli-utils.c
 269
 270 SUBDIR_CLI_OBS = $(patsubst %.c,%.o,$(SUBDIR_CLI_SRCS))
 271
 272 #
 273 # MI sub directory definitons
 274 #
 275 SUBDIR_MI_SRCS = \
 276         mi/mi-cmd-break.c \
 277         mi/mi-cmd-catch.c \
 278         mi/mi-cmd-disas.c \
 279         mi/mi-cmd-env.c \
 280         mi/mi-cmd-file.c \
 281         mi/mi-cmd-info.c \
 282         mi/mi-cmd-stack.c \
 283         mi/mi-cmd-target.c \
 284         mi/mi-cmd-var.c \
 285         mi/mi-cmds.c \
 286         mi/mi-console.c \
 287         mi/mi-getopt.c \
 288         mi/mi-interp.c \
 289         mi/mi-main.c \
 290         mi/mi-out.c \
 291         mi/mi-parse.c \
 292         mi/mi-symbol-cmds.c
 293
 294 SUBDIR_MI_OBS = $(patsubst %.c,%.o,$(SUBDIR_MI_SRCS))
 295
 296 SUBDIR_MI_DEPS =
 297 SUBDIR_MI_LDFLAGS =
 298 SUBDIR_MI_CFLAGS =
 299
 300 #
 301 # TUI sub directory definitions
 302 #
 303 SUBDIR_TUI_SRCS = \
 304         tui/tui.c \
 305         tui/tui-command.c \
 306         tui/tui-data.c \
 307         tui/tui-disasm.c \
 308         tui/tui-file.c \
 309         tui/tui-hooks.c \
 310         tui/tui-interp.c \
 311         tui/tui-io.c \
 312         tui/tui-layout.c \
 313         tui/tui-location.c \
 314         tui/tui-out.c \
 315         tui/tui-regs.c \
 316         tui/tui-source.c \
 317         tui/tui-stack.c \
 318         tui/tui-win.c \
 319         tui/tui-wingeneral.c \
 320         tui/tui-winsource.c
 321
 322 SUBDIR_TUI_OBS = $(patsubst %.c,%.o,$(SUBDIR_TUI_SRCS))
 323
 324 SUBDIR_TUI_DEPS =
 325 SUBDIR_TUI_LDFLAGS =
 326 SUBDIR_TUI_CFLAGS = -DTUI=1
 327
 328 #
 329 # GCC Compile support sub-directory definitions
 330 #
 331 SUBDIR_GCC_COMPILE_SRCS = \
 332         compile/compile.c \
 333         compile/compile-c-support.c \
 334         compile/compile-c-symbols.c \
 335         compile/compile-c-types.c \
 336         compile/compile-cplus-symbols.c \
 337         compile/compile-cplus-types.c \
 338         compile/compile-loc2c.c \
 339         compile/compile-object-load.c \
 340         compile/compile-object-run.c
 341
 342 SUBDIR_GCC_COMPILE_OBS = $(patsubst %.c,%.o,$(filter %.c,$(SUBDIR_GCC_COMPILE_SRCS)))
 343
 344 #
 345 # Guile sub directory definitons for guile support.
 346 #
 347 SUBDIR_GUILE_SRCS = \
 348         guile/guile.c \
 349         guile/scm-arch.c \
 350         guile/scm-auto-load.c \
 351         guile/scm-block.c \
 352         guile/scm-breakpoint.c \
 353         guile/scm-cmd.c \
 354         guile/scm-disasm.c \
 355         guile/scm-exception.c \
 356         guile/scm-frame.c \
 357         guile/scm-gsmob.c \
 358         guile/scm-iterator.c \
 359         guile/scm-lazy-string.c \
 360         guile/scm-math.c \
 361         guile/scm-objfile.c \
 362         guile/scm-param.c \
 363         guile/scm-ports.c \
 364         guile/scm-pretty-print.c \
 365         guile/scm-progspace.c \
 366         guile/scm-safe-call.c \
 367         guile/scm-string.c \
 368         guile/scm-symbol.c \
 369         guile/scm-symtab.c \
 370         guile/scm-type.c \
 371         guile/scm-utils.c \
 372         guile/scm-value.c
 373
 374 SUBDIR_GUILE_OBS = $(patsubst %.c,%.o,$(SUBDIR_GUILE_SRCS))
 375
 376 SUBDIR_GUILE_DEPS =
 377 SUBDIR_GUILE_LDFLAGS =
 378 SUBDIR_GUILE_CFLAGS =
 379
 380 #
 381 # python sub directory definitons
 382 #
 383 SUBDIR_PYTHON_SRCS = \
 384         python/py-arch.c \
 385         python/py-auto-load.c \
 386         python/py-block.c \
 387         python/py-bpevent.c \
 388         python/py-breakpoint.c \
 389         python/py-cmd.c \
 390         python/py-continueevent.c \
 391         python/py-event.c \
 392         python/py-evtregistry.c \
 393         python/py-evts.c \
 394         python/py-exitedevent.c \
 395         python/py-finishbreakpoint.c \
 396         python/py-frame.c \
 397         python/py-framefilter.c \
 398         python/py-function.c \
 399         python/py-gdb-readline.c \
 400         python/py-inferior.c \
 401         python/py-infevents.c \
 402         python/py-infthread.c \
 403         python/py-instruction.c \
 404         python/py-lazy-string.c \
 405         python/py-linetable.c \
 406         python/py-newobjfileevent.c \
 407         python/py-objfile.c \
 408         python/py-param.c \
 409         python/py-prettyprint.c \
 410         python/py-progspace.c \
 411         python/py-record.c \
 412         python/py-record-btrace.c \
 413         python/py-record-full.c \
 414         python/py-registers.c \
 415         python/py-signalevent.c \
 416         python/py-stopevent.c \
 417         python/py-symbol.c \
 418         python/py-symtab.c \
 419         python/py-threadevent.c \
 420         python/py-tui.c \
 421         python/py-type.c \
 422         python/py-unwind.c \
 423         python/py-utils.c \
 424         python/py-value.c \
 425         python/py-varobj.c \
 426         python/py-xmethods.c \
 427         python/python.c
 428
 429 SUBDIR_PYTHON_OBS = $(patsubst %.c,%.o,$(SUBDIR_PYTHON_SRCS))
 430
 431 SUBDIR_PYTHON_DEPS =
 432 SUBDIR_PYTHON_LDFLAGS =
 433 SUBDIR_PYTHON_CFLAGS =
 434
 435 SELFTESTS_SRCS = \
 436         disasm-selftests.c \
 437         gdbarch-selftests.c \
 438         selftest-arch.c \
 439         unittests/array-view-selftests.c \
 440         unittests/child-path-selftests.c \
 441         unittests/cli-utils-selftests.c \
 442         unittests/command-def-selftests.c \
 443         unittests/common-utils-selftests.c \
 444         unittests/copy_bitwise-selftests.c \
 445         unittests/enum-flags-selftests.c \
 446         unittests/environ-selftests.c \
 447         unittests/filtered_iterator-selftests.c \
 448         unittests/format_pieces-selftests.c \
 449         unittests/function-view-selftests.c \
 450         unittests/gdb_tilde_expand-selftests.c \
 451         unittests/gmp-utils-selftests.c \
 452         unittests/lookup_name_info-selftests.c \
 453         unittests/memory-map-selftests.c \
 454         unittests/memrange-selftests.c \
 455         unittests/offset-type-selftests.c \
 456         unittests/observable-selftests.c \
 457         unittests/optional-selftests.c \
 458         unittests/parse-connection-spec-selftests.c \
 459         unittests/ptid-selftests.c \
 460         unittests/main-thread-selftests.c \
 461         unittests/mkdir-recursive-selftests.c \
 462         unittests/rsp-low-selftests.c \
 463         unittests/scoped_fd-selftests.c \
 464         unittests/scoped_mmap-selftests.c \
 465         unittests/scoped_restore-selftests.c \
 466         unittests/search-memory-selftests.c \
 467         unittests/string_view-selftests.c \
 468         unittests/style-selftests.c \
 469         unittests/tracepoint-selftests.c \
 470         unittests/tui-selftests.c \
 471         unittests/unpack-selftests.c \
 472         unittests/utils-selftests.c \
 473         unittests/vec-utils-selftests.c \
 474         unittests/xml-utils-selftests.c
 475
 476 SELFTESTS_OBS = $(patsubst %.c,%.o,$(SELFTESTS_SRCS))
 477
 478 SUBDIR_TARGET_SRCS = target/waitstatus.c
 479 SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
 480
 481
 482 # Opcodes currently live in one of two places.  Either they are in the
 483 # opcode library, typically ../opcodes, or they are in a header file
 484 # in INCLUDE_DIR.
 485 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 486 # disassemblers?
 487 OPCODES_DIR = ../opcodes
 488 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 489 OPCODES = $(OPCODES_DIR)/libopcodes.a
 490 # Where are the other opcode tables which only have header file
 491 # versions?
 492 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 493 # See TOP_CFLAGS as well.
 494 OPCODES_CFLAGS = -I$(OP_INCLUDE)
 495
 496 # Allow includes like "opcodes/mumble.h".
 497 TOP_CFLAGS = -I$(top_srcdir)/..
 498
 499 # The simulator is usually nonexistent; targets that include one
 500 # should set this to list all the .o or .a files to be linked in.
 501 SIM = @SIM@
 502
 503 WIN32LIBS = @WIN32LIBS@
 504
 505 # Tcl et al cflags and libraries
 506 TCL = @TCL_LIBRARY@
 507 TCL_CFLAGS = @TCL_INCLUDE@
 508 GDBTKLIBS = @GDBTKLIBS@
 509 # Extra flags that the GDBTK files need:
 510 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 511
 512 TK = @TK_LIBRARY@
 513 TK_CFLAGS = @TK_INCLUDE@
 514
 515 X11_CFLAGS = @TK_XINCLUDES@
 516 X11_LDFLAGS =
 517 X11_LIBS =
 518
 519 WIN32LDAPP = @WIN32LDAPP@
 520
 521 LIBGUI = @LIBGUI@
 522 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 523 IDE_CFLAGS = $(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 524
 525 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 526
 527 # The version of gdbtk we're building. This should be kept
 528 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 529 GDBTK_VERSION = 1.0
 530 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 531
 532 # Gdbtk requires an absolute path to the source directory or
 533 # the testsuite won't run properly.
 534 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 535
 536 SUBDIR_GDBTK_OBS = \
 537         gdbtk.o \
 538         gdbtk-bp.o \
 539         gdbtk-cmds.o \
 540         gdbtk-hooks.o \
 541         gdbtk-interp.o \
 542         gdbtk-register.o \
 543         gdbtk-stack.o \
 544         gdbtk-varobj.o \
 545         gdbtk-wrapper.o
 546
 547 SUBDIR_GDBTK_SRCS = \
 548         gdbtk/generic/gdbtk.c \
 549         gdbtk/generic/gdbtk-bp.c \
 550         gdbtk/generic/gdbtk-cmds.c \
 551         gdbtk/generic/gdbtk-hooks.c \
 552         gdbtk/generic/gdbtk-interp.c \
 553         gdbtk/generic/gdbtk-main.c \
 554         gdbtk/generic/gdbtk-register.c \
 555         gdbtk/generic/gdbtk-stack.c \
 556         gdbtk/generic/gdbtk-varobj.c \
 557         gdbtk/generic/gdbtk-wrapper.c
 558
 559 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 560 SUBDIR_GDBTK_LDFLAGS =
 561 SUBDIR_GDBTK_CFLAGS = -DGDBTK
 562
 563 CONFIG_OBS = @CONFIG_OBS@
 564 CONFIG_SRCS = @CONFIG_SRCS@
 565 CONFIG_DEPS = @CONFIG_DEPS@
 566 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 567 ENABLE_CFLAGS = @ENABLE_CFLAGS@
 568 CONFIG_ALL = @CONFIG_ALL@
 569 CONFIG_CLEAN = @CONFIG_CLEAN@
 570 CONFIG_INSTALL = @CONFIG_INSTALL@
 571 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 572 HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
 573
 574 CONFIG_SRC_SUBDIR = arch cli dwarf2 mi compile tui unittests guile python \
 575         target nat
 576 CONFIG_DEP_SUBDIR = $(addsuffix /$(DEPDIR),$(CONFIG_SRC_SUBDIR))
 577
 578 # -I. for config files.
 579 # -I$(srcdir) for gdb internal headers.
 580 # -I$(srcdir)/config for more generic config files.
 581
 582 # It is also possible that you will need to add -I/usr/include/sys if
 583 # your system doesn't have fcntl.h in /usr/include (which is where it
 584 # should be according to Posix).
 585 DEFS = @DEFS@
 586 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config \
 587         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 588
 589 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 590 GLOBAL_CFLAGS = $(MH_CFLAGS)
 591
 592 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 593
 594 # These are specifically reserved for setting from the command line
 595 # when running make.  I.E.: "make CFLAGS=-Wmissing-prototypes".
 596 CFLAGS = @CFLAGS@
 597 CXXFLAGS = @CXXFLAGS@
 598 CPPFLAGS = @CPPFLAGS@
 599
 600 # Set by configure, for e.g. expat.  Python installations are such that
 601 # C headers are included using their basename (for example, we #include
 602 # <Python.h> rather than, say, <python/Python.h>).  Since the file names
 603 # are sometimes a little generic, we think that the risk of collision
 604 # with other header files is high.  If that happens, we try to mitigate
 605 # a bit the consequences by putting the Python includes last in the list.
 606 INTERNAL_CPPFLAGS = $(CPPFLAGS) @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@ \
 607         @LARGEFILE_CPPFLAGS@
 608
 609 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 610 INTERNAL_CFLAGS_BASE = \
 611         $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 612         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
 613         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 614         $(INTL_CFLAGS) $(INCGNU) $(INCSUPPORT) $(ENABLE_CFLAGS) \
 615         $(INTERNAL_CPPFLAGS) $(SRCHIGH_CFLAGS) $(TOP_CFLAGS) $(PTHREAD_CFLAGS) \
 616         $(DEBUGINFOD_CFLAGS)
 617 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 618 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 619
 620 # LDFLAGS is specifically reserved for setting from the command line
 621 # when running make.
 622 LDFLAGS = @LDFLAGS@
 623
 624 # Profiling options need to go here to work.
 625 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 626 # and have it work; that's why CFLAGS is here.
 627 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 628 INTERNAL_LDFLAGS = \
 629         $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
 630         $(LDFLAGS) $(CONFIG_LDFLAGS) $(PTHREAD_CFLAGS)
 631
 632 # Libraries and corresponding dependencies for compiling gdb.
 633 # XM_CLIBS, defined in *config files, have host-dependent libs.
 634 # LIBIBERTY appears twice on purpose.
 635 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) \
 636         $(LIBSUPPORT) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 637         $(XM_CLIBS) $(GDBTKLIBS) \
 638         @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
 639         $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
 640         $(WIN32LIBS) $(LIBGNU) $(LIBGNU_EXTRA_LIBS) $(LIBICONV) \
 641         $(LIBMPFR) $(LIBGMP) $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) \
 642         $(DEBUGINFOD_LIBS)
 643 CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(CTF_DEPS) \
 644         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
 645         $(LIBSUPPORT)
 646
 647 DIST = gdb
 648
 649 RUNTEST = runtest
 650 RUNTESTFLAGS =
 651
 652 # XML files to build in to GDB.
 653 XMLFILES = \
 654         $(srcdir)/features/btrace.dtd \
 655         $(srcdir)/features/btrace-conf.dtd \
 656         $(srcdir)/features/gdb-target.dtd \
 657         $(srcdir)/features/library-list.dtd \
 658         $(srcdir)/features/library-list-aix.dtd \
 659         $(srcdir)/features/library-list-svr4.dtd \
 660         $(srcdir)/features/osdata.dtd \
 661         $(srcdir)/features/threads.dtd \
 662         $(srcdir)/features/traceframe-info.dtd \
 663         $(srcdir)/features/xinclude.dtd
 664
 665 # Build the ser-*.o files the host supports.  This includes ser-unix.o
 666 # for any system that supports a POSIX interface to the serial port.
 667 # See configure.ac.
 668 SER_HARDWIRE = @SER_HARDWIRE@
 669
 670 # This is remote-sim.o if a simulator is to be linked in.
 671 SIM_OBS = @SIM_OBS@
 672
 673 # Target-dependent object files.
 674 TARGET_OBS = @TARGET_OBS@
 675
 676 # All target-dependent objects files that require 64-bit CORE_ADDR
 677 # (used with --enable-targets=all --enable-64-bit-bfd).
 678 ALL_64_TARGET_OBS = \
 679         aarch64-fbsd-tdep.o \
 680         aarch64-linux-tdep.o \
 681         aarch64-newlib-tdep.o \
 682         aarch64-ravenscar-thread.o \
 683         aarch64-tdep.o \
 684         alpha-bsd-tdep.o \
 685         alpha-linux-tdep.o \
 686         alpha-mdebug-tdep.o \
 687         alpha-netbsd-tdep.o \
 688         alpha-obsd-tdep.o \
 689         alpha-tdep.o \
 690         amd64-darwin-tdep.o \
 691         amd64-dicos-tdep.o \
 692         amd64-fbsd-tdep.o \
 693         amd64-linux-tdep.o \
 694         amd64-netbsd-tdep.o \
 695         amd64-obsd-tdep.o \
 696         amd64-ravenscar-thread.o \
 697         amd64-sol2-tdep.o \
 698         amd64-tdep.o \
 699         amd64-windows-tdep.o \
 700         arch/aarch64.o \
 701         arch/aarch64-insn.o \
 702         arch/aarch64-mte-linux.o \
 703         arch/amd64.o \
 704         ia64-linux-tdep.o \
 705         ia64-tdep.o \
 706         ia64-vms-tdep.o \
 707         mips64-obsd-tdep.o \
 708         sparc64-fbsd-tdep.o \
 709         sparc64-linux-tdep.o \
 710         sparc64-netbsd-tdep.o \
 711         sparc64-obsd-tdep.o \
 712         sparc64-sol2-tdep.o \
 713         sparc64-tdep.o
 714
 715 # All other target-dependent objects files (used with --enable-targets=all).
 716 ALL_TARGET_OBS = \
 717         aarch32-tdep.o \
 718         arc-linux-tdep.o \
 719         arc-tdep.o \
 720         arch/aarch32.o \
 721         arch/arc.o \
 722         arch/arm.o \
 723         arch/arm-get-next-pcs.o \
 724         arch/arm-linux.o \
 725         arch/i386.o \
 726         arch/ppc-linux-common.o \
 727         arch/riscv.o \
 728         arm-bsd-tdep.o \
 729         arm-fbsd-tdep.o \
 730         arm-linux-tdep.o \
 731         arm-netbsd-tdep.o \
 732         arm-none-tdep.o \
 733         arm-obsd-tdep.o \
 734         arm-pikeos-tdep.o \
 735         arm-tdep.o \
 736         arm-wince-tdep.o \
 737         avr-tdep.o \
 738         bfin-linux-tdep.o \
 739         bfin-tdep.o \
 740         bpf-tdep.o \
 741         bsd-uthread.o \
 742         cris-linux-tdep.o \
 743         cris-tdep.o \
 744         csky-linux-tdep.o \
 745         csky-tdep.o \
 746         dicos-tdep.o \
 747         fbsd-tdep.o \
 748         frv-linux-tdep.o \
 749         frv-tdep.o \
 750         ft32-tdep.o \
 751         glibc-tdep.o \
 752         h8300-tdep.o \
 753         hppa-bsd-tdep.o \
 754         hppa-linux-tdep.o \
 755         hppa-netbsd-tdep.o \
 756         hppa-obsd-tdep.o \
 757         hppa-tdep.o \
 758         i386-bsd-tdep.o \
 759         i386-darwin-tdep.o \
 760         i386-dicos-tdep.o \
 761         i386-fbsd-tdep.o \
 762         i386-gnu-tdep.o \
 763         i386-go32-tdep.o \
 764         i386-linux-tdep.o \
 765         i386-netbsd-tdep.o \
 766         i386-nto-tdep.o \
 767         i386-obsd-tdep.o \
 768         i386-sol2-tdep.o \
 769         i386-tdep.o \
 770         i386-windows-tdep.o \
 771         i387-tdep.o \
 772         iq2000-tdep.o \
 773         linux-record.o \
 774         linux-tdep.o \
 775         lm32-tdep.o \
 776         m32c-tdep.o \
 777         m32r-linux-tdep.o \
 778         m32r-tdep.o \
 779         m68hc11-tdep.o \
 780         m68k-bsd-tdep.o \
 781         m68k-linux-tdep.o \
 782         m68k-tdep.o \
 783         mep-tdep.o \
 784         microblaze-linux-tdep.o \
 785         microblaze-tdep.o \
 786         mips-fbsd-tdep.o \
 787         mips-linux-tdep.o \
 788         mips-netbsd-tdep.o \
 789         mips-sde-tdep.o \
 790         mips-tdep.o \
 791         mn10300-linux-tdep.o \
 792         mn10300-tdep.o \
 793         moxie-tdep.o \
 794         msp430-tdep.o \
 795         netbsd-tdep.o \
 796         nds32-tdep.o \
 797         nios2-linux-tdep.o \
 798         nios2-tdep.o \
 799         nto-tdep.o \
 800         obsd-tdep.o \
 801         or1k-linux-tdep.o \
 802         or1k-tdep.o \
 803         ppc-fbsd-tdep.o \
 804         ppc-linux-tdep.o \
 805         ppc-netbsd-tdep.o \
 806         ppc-obsd-tdep.o \
 807         ppc-ravenscar-thread.o \
 808         ppc-sysv-tdep.o \
 809         ppc64-tdep.o \
 810         ravenscar-thread.o \
 811         riscv-fbsd-tdep.o \
 812         riscv-linux-tdep.o \
 813         riscv-none-tdep.o \
 814         riscv-ravenscar-thread.o \
 815         riscv-tdep.o \
 816         rl78-tdep.o \
 817         rs6000-aix-tdep.o \
 818         rs6000-lynx178-tdep.o \
 819         rs6000-tdep.o \
 820         rx-tdep.o \
 821         s12z-tdep.o \
 822         s390-linux-tdep.o \
 823         s390-tdep.o \
 824         score-tdep.o \
 825         sh-linux-tdep.o \
 826         sh-netbsd-tdep.o \
 827         sh-tdep.o \
 828         sol2-tdep.o \
 829         solib-aix.o \
 830         solib-darwin.o \
 831         solib-dsbt.o \
 832         solib-frv.o \
 833         solib-svr4.o \
 834         sparc-linux-tdep.o \
 835         sparc-netbsd-tdep.o \
 836         sparc-obsd-tdep.o \
 837         sparc-ravenscar-thread.o \
 838         sparc-sol2-tdep.o \
 839         sparc-tdep.o \
 840         symfile-mem.o \
 841         tic6x-linux-tdep.o \
 842         tic6x-tdep.o \
 843         tilegx-linux-tdep.o \
 844         tilegx-tdep.o \
 845         v850-tdep.o \
 846         vax-netbsd-tdep.o \
 847         vax-tdep.o \
 848         windows-tdep.o \
 849         x86-tdep.o \
 850         xcoffread.o \
 851         xstormy16-tdep.o \
 852         xtensa-config.o \
 853         xtensa-linux-tdep.o \
 854         xtensa-tdep.o
 855
 856 # The following native-target dependent variables are defined on
 857 # configure.nat.
 858 NAT_FILE = @NAT_FILE@
 859 NATDEPFILES = @NATDEPFILES@
 860 NAT_CDEPS = @NAT_CDEPS@
 861 LOADLIBES = @LOADLIBES@
 862 MH_CFLAGS = @MH_CFLAGS@
 863 XM_CLIBS = @XM_CLIBS@
 864 NAT_GENERATED_FILES = @NAT_GENERATED_FILES@
 865 NM_H = @NM_H@
 866 HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
 867
 868 # Native-target dependent makefile fragment comes in here.
 869 @nat_makefile_frag@
 870
 871 # End of native-target dependent variables.
 872
 873 FLAGS_TO_PASS = \
 874         "prefix=$(prefix)" \
 875         "exec_prefix=$(exec_prefix)" \
 876         "infodir=$(infodir)" \
 877         "datarootdir=$(datarootdir)" \
 878         "docdir=$(docdir)" \
 879         "htmldir=$(htmldir)" \
 880         "pdfdir=$(pdfdir)" \
 881         "libdir=$(libdir)" \
 882         "mandir=$(mandir)" \
 883         "datadir=$(datadir)" \
 884         "includedir=$(includedir)" \
 885         "against=$(against)" \
 886         "DESTDIR=$(DESTDIR)" \
 887         "AR=$(AR)" \
 888         "AR_FLAGS=$(AR_FLAGS)" \
 889         "CC=$(CC)" \
 890         "CFLAGS=$(CFLAGS)" \
 891         "CXX=$(CXX)" \
 892         "CXX_DIALECT=$(CXX_DIALECT)" \
 893         "CXXFLAGS=$(CXXFLAGS)" \
 894         "DLLTOOL=$(DLLTOOL)" \
 895         "LDFLAGS=$(LDFLAGS)" \
 896         "RANLIB=$(RANLIB)" \
 897         "MAKEINFO=$(MAKEINFO)" \
 898         "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
 899         "MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
 900         "MAKEHTML=$(MAKEHTML)" \
 901         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 902         "INSTALL=$(INSTALL)" \
 903         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 904         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 905         "INSTALL_DATA=$(INSTALL_DATA)" \
 906         "RUNTEST=$(RUNTEST)" \
 907         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 908
 909 # Flags that we pass when building the testsuite.
 910
 911 # empty for native, $(target_alias)/ for cross
 912 target_subdir = @target_subdir@
 913
 914 CC_FOR_TARGET = ` \
 915   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 916     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 917       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 918     else \
 919       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 920     fi; \
 921   else \
 922     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 923       echo $(CC); \
 924     else \
 925       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 926     fi; \
 927   fi`
 928
 929 CXX_FOR_TARGET = ` \
 930   if [ -f $${rootme}/../gcc/xg++ ] ; then \
 931     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 932       echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 933     else \
 934       echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
 935     fi; \
 936   else \
 937     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 938       echo $(CXX); \
 939     else \
 940       t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
 941     fi; \
 942   fi`
 943
 944 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 945 # duplicating the lengthy definition.
 946 TARGET_FLAGS_TO_PASS = \
 947         "prefix=$(prefix)" \
 948         "exec_prefix=$(exec_prefix)" \
 949         "against=$(against)" \
 950         'CC=$$(CC_FOR_TARGET)' \
 951         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 952         "CFLAGS=$(CFLAGS)" \
 953         'CXX=$$(CXX_FOR_TARGET)' \
 954         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 955         "CXXFLAGS=$(CXXFLAGS)" \
 956         "INSTALL=$(INSTALL)" \
 957         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 958         "INSTALL_DATA=$(INSTALL_DATA)" \
 959         "MAKEINFO=$(MAKEINFO)" \
 960         "MAKEHTML=$(MAKEHTML)" \
 961         "RUNTEST=$(RUNTEST)" \
 962         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 963         "FORCE_PARALLEL=$(FORCE_PARALLEL)" \
 964         "TESTS=$(TESTS)"
 965
 966 # All source files that go into linking GDB.
 967
 968 # Files that should wind up in SFILES and whose corresponding .o
 969 # should be in COMMON_OBS.
 970 COMMON_SFILES = \
 971         ada-lang.c \
 972         ada-tasks.c \
 973         ada-typeprint.c \
 974         ada-valprint.c \
 975         ada-varobj.c \
 976         addrmap.c \
 977         agent.c \
 978         alloc.c \
 979         annotate.c \
 980         arch-utils.c \
 981         async-event.c \
 982         auto-load.c \
 983         auxv.c \
 984         ax-gdb.c \
 985         ax-general.c \
 986         bcache.c \
 987         bfd-target.c \
 988         block.c \
 989         blockframe.c \
 990         break-catch-sig.c \
 991         break-catch-syscall.c \
 992         break-catch-throw.c \
 993         breakpoint.c \
 994         btrace.c \
 995         build-id.c \
 996         buildsym-legacy.c \
 997         buildsym.c \
 998         c-lang.c \
 999         c-typeprint.c \
1000         c-valprint.c \
1001         c-varobj.c \
1002         charset.c \
1003         cli-out.c \
1004         coff-pe-read.c \
1005         coffread.c \
1006         complaints.c \
1007         completer.c \
1008         copying.c \
1009         corefile.c \
1010         corelow.c \
1011         cp-abi.c \
1012         cp-namespace.c \
1013         cp-support.c \
1014         cp-valprint.c \
1015         ctfread.c \
1016         d-lang.c \
1017         d-namespace.c \
1018         d-valprint.c \
1019         dbxread.c \
1020         dcache.c \
1021         debug.c \
1022         debuginfod-support.c \
1023         dictionary.c \
1024         disasm.c \
1025         displaced-stepping.c \
1026         dummy-frame.c \
1027         dwarf2/abbrev.c \
1028         dwarf2/attribute.c \
1029         dwarf2/comp-unit-head.c \
1030         dwarf2/cu.c \
1031         dwarf2/dwz.c \
1032         dwarf2/expr.c \
1033         dwarf2/frame-tailcall.c \
1034         dwarf2/frame.c \
1035         dwarf2/index-cache.c \
1036         dwarf2/index-common.c \
1037         dwarf2/index-write.c \
1038         dwarf2/leb.c \
1039         dwarf2/line-header.c \
1040         dwarf2/loc.c \
1041         dwarf2/macro.c \
1042         dwarf2/read.c \
1043         dwarf2/section.c \
1044         dwarf2/stringify.c \
1045         eval.c \
1046         event-top.c \
1047         exceptions.c \
1048         exec.c \
1049         expprint.c \
1050         extension.c \
1051         f-lang.c \
1052         f-typeprint.c \
1053         f-valprint.c \
1054         filename-seen-cache.c \
1055         filesystem.c \
1056         findcmd.c \
1057         findvar.c \
1058         frame.c \
1059         frame-base.c \
1060         frame-unwind.c \
1061         gcore.c \
1062         gdb-demangle.c \
1063         gdb_bfd.c \
1064         gdb_obstack.c \
1065         gdb_regex.c \
1066         gdbarch.c \
1067         gdbtypes.c \
1068         gmp-utils.c \
1069         gnu-v2-abi.c \
1070         gnu-v3-abi.c \
1071         go-lang.c \
1072         go-typeprint.c \
1073         go-valprint.c \
1074         inf-child.c \
1075         inf-loop.c \
1076         infcall.c \
1077         infcmd.c \
1078         inferior.c \
1079         inflow.c \
1080         infrun.c \
1081         inline-frame.c \
1082         interps.c \
1083         jit.c \
1084         language.c \
1085         linespec.c \
1086         location.c \
1087         m2-lang.c \
1088         m2-typeprint.c \
1089         m2-valprint.c \
1090         macrocmd.c \
1091         macroexp.c \
1092         macroscope.c \
1093         macrotab.c \
1094         main.c \
1095         maint.c \
1096         maint-test-options.c \
1097         maint-test-settings.c \
1098         mdebugread.c \
1099         mem-break.c \
1100         memattr.c \
1101         memory-map.c \
1102         memrange.c \
1103         minidebug.c \
1104         minsyms.c \
1105         mipsread.c \
1106         namespace.c \
1107         objc-lang.c \
1108         objfiles.c \
1109         observable.c \
1110         opencl-lang.c \
1111         osabi.c \
1112         osdata.c \
1113         p-lang.c \
1114         p-typeprint.c \
1115         p-valprint.c \
1116         parse.c \
1117         printcmd.c \
1118         probe.c \
1119         process-stratum-target.c \
1120         producer.c \
1121         progspace.c \
1122         progspace-and-thread.c \
1123         prologue-value.c \
1124         psymtab.c \
1125         record.c \
1126         record-btrace.c \
1127         record-full.c \
1128         regcache.c \
1129         regcache-dump.c \
1130         reggroups.c \
1131         registry.c \
1132         remote.c \
1133         remote-fileio.c \
1134         remote-notif.c \
1135         reverse.c \
1136         run-on-main-thread.c \
1137         rust-lang.c \
1138         rust-parse.c \
1139         sentinel-frame.c \
1140         ser-event.c \
1141         serial.c \
1142         skip.c \
1143         solib.c \
1144         solib-target.c \
1145         source.c \
1146         source-cache.c \
1147         stabsread.c \
1148         stack.c \
1149         std-regs.c \
1150         symfile.c \
1151         symfile-debug.c \
1152         symmisc.c \
1153         symtab.c \
1154         target.c \
1155         target-connection.c \
1156         target-dcache.c \
1157         target-descriptions.c \
1158         target-memory.c \
1159         test-target.c \
1160         thread.c \
1161         thread-iter.c \
1162         tid-parse.c \
1163         top.c \
1164         tracectf.c \
1165         tracefile.c \
1166         tracefile-tfile.c \
1167         tracepoint.c \
1168         trad-frame.c \
1169         tramp-frame.c \
1170         target-float.c \
1171         type-stack.c \
1172         typeprint.c \
1173         ui-file.c \
1174         ui-out.c \
1175         ui-style.c \
1176         user-regs.c \
1177         utils.c \
1178         valarith.c \
1179         valops.c \
1180         valprint.c \
1181         value.c \
1182         varobj.c \
1183         xml-support.c \
1184         xml-syscall.c \
1185         xml-tdesc.c
1186
1187 # Links made at configuration time should not be specified here, since
1188 # SFILES is used in building the distribution archive.
1189 SFILES = \
1190         ada-exp.y \
1191         arch/i386.c \
1192         c-exp.y \
1193         cp-name-parser.y \
1194         d-exp.y \
1195         dtrace-probe.c \
1196         elf-none-tdep.c \
1197         elfread.c \
1198         f-exp.y \
1199         gcore-elf.c \
1200         gdb.c \
1201         go-exp.y \
1202         m2-exp.y \
1203         p-exp.y \
1204         proc-service.list \
1205         ser-base.c \
1206         ser-unix.c \
1207         sol-thread.c \
1208         stap-probe.c \
1209         stub-termcap.c \
1210         symfile-mem.c \
1211         ui-file.h \
1212         mi/mi-common.c \
1213         $(SUBDIR_CLI_SRCS) \
1214         $(SUBDIR_TARGET_SRCS) \
1215         $(COMMON_SFILES) \
1216         $(SUBDIR_GCC_COMPILE_SRCS)
1217
1218 # Header files that need to have srcdir added.  Note that in the cases
1219 # where we use a macro like $(gdbcmd_h), things are carefully arranged
1220 # so that each .h file is listed exactly once (M-x tags-search works
1221 # wrong if TAGS has files twice).  Because this is tricky to get
1222 # right, it is probably easiest just to list .h files here directly.
1223
1224 HFILES_NO_SRCDIR = \
1225         aarch32-tdep.h \
1226         aarch64-ravenscar-thread.h \
1227         aarch64-tdep.h \
1228         ada-lang.h \
1229         addrmap.h \
1230         alpha-bsd-tdep.h \
1231         alpha-tdep.h \
1232         amd64-darwin-tdep.h \
1233         amd64-linux-tdep.h \
1234         amd64-nat.h \
1235         amd64-ravenscar-thread.h \
1236         amd64-tdep.h \
1237         annotate.h \
1238         arc-tdep.h \
1239         arch-utils.h \
1240         arm-linux-tdep.h \
1241         arm-netbsd-tdep.h \
1242         arm-tdep.h \
1243         async-event.h \
1244         auto-load.h \
1245         auxv.h \
1246         ax.h \
1247         ax-gdb.h \
1248         bcache.h \
1249         bfd-target.h \
1250         bfin-tdep.h \
1251         block.h \
1252         breakpoint.h \
1253         bsd-kvm.h \
1254         bsd-uthread.h \
1255         build-id.h \
1256         buildsym-legacy.h \
1257         buildsym.h \
1258         c-lang.h \
1259         charset.h \
1260         charset-list.h \
1261         cli-out.h \
1262         coff-pe-read.h \
1263         command.h \
1264         complaints.h \
1265         completer.h \
1266         cp-abi.h \
1267         cp-support.h \
1268         csky-tdep.h \
1269         d-lang.h \
1270         darwin-nat.h \
1271         dcache.h \
1272         defs.h \
1273         dicos-tdep.h \
1274         dictionary.h \
1275         disasm.h \
1276         dummy-frame.h \
1277         dwarf2/cu.h \
1278         dwarf2/frame-tailcall.h \
1279         dwarf2/frame.h \
1280         dwarf2/expr.h \
1281         dwarf2/index-cache.h \
1282         dwarf2/index-common.h \
1283         dwarf2/loc.h \
1284         dwarf2/read.h \
1285         event-top.h \
1286         exceptions.h \
1287         exec.h \
1288         expression.h \
1289         extension.h \
1290         extension-priv.h \
1291         f-array-walker.h \
1292         f-lang.h \
1293         fbsd-nat.h \
1294         fbsd-tdep.h \
1295         filesystem.h \
1296         frame.h \
1297         frame-base.h \
1298         frame-unwind.h \
1299         frv-tdep.h \
1300         ft32-tdep.h \
1301         gcore-elf.h \
1302         gcore.h \
1303         gdb_bfd.h \
1304         gdb_curses.h \
1305         gdb_expat.h \
1306         gdb_obstack.h \
1307         gdb_proc_service.h \
1308         gdb_regex.h \
1309         gdb_select.h \
1310         gdb-stabs.h \
1311         gdb_vfork.h \
1312         gdb_wchar.h \
1313         gdbarch.h \
1314         gdbcmd.h \
1315         gdbcore.h \
1316         gdbthread.h \
1317         gdbtypes.h \
1318         glibc-tdep.h \
1319         gmp-utils.h \
1320         gnu-nat.h \
1321         go-lang.h \
1322         gregset.h \
1323         hppa-bsd-tdep.h \
1324         hppa-linux-offsets.h \
1325         hppa-tdep.h \
1326         i386-bsd-nat.h \
1327         i386-darwin-tdep.h \
1328         i386-linux-nat.h \
1329         i386-linux-tdep.h \
1330         i386-tdep.h \
1331         i387-tdep.h \
1332         ia64-libunwind-tdep.h \
1333         ia64-tdep.h \
1334         inf-child.h \
1335         inf-loop.h \
1336         inf-ptrace.h \
1337         infcall.h \
1338         inferior.h \
1339         inline-frame.h \
1340         interps.h \
1341         jit.h \
1342         language.h \
1343         linespec.h \
1344         linux-fork.h \
1345         linux-nat.h \
1346         linux-record.h \
1347         linux-tdep.h \
1348         location.h \
1349         m2-lang.h \
1350         m32r-tdep.h \
1351         m68k-tdep.h \
1352         macroexp.h \
1353         macroscope.h \
1354         macrotab.h \
1355         main.h \
1356         mdebugread.h \
1357         memattr.h \
1358         memory-map.h \
1359         memrange.h \
1360         microblaze-tdep.h \
1361         mips-linux-tdep.h \
1362         mips-netbsd-tdep.h \
1363         mips-tdep.h \
1364         mn10300-tdep.h \
1365         moxie-tdep.h \
1366         netbsd-nat.h \
1367         netbsd-tdep.h \
1368         nds32-tdep.h \
1369         nios2-tdep.h \
1370         elf-none-tdep.h \
1371         nto-tdep.h \
1372         objc-lang.h \
1373         objfiles.h \
1374         obsd-nat.h \
1375         obsd-tdep.h \
1376         osabi.h \
1377         osdata.h \
1378         p-lang.h \
1379         parser-defs.h \
1380         ppc-fbsd-tdep.h \
1381         ppc-linux-tdep.h \
1382         ppc-netbsd-tdep.h \
1383         ppc-obsd-tdep.h \
1384         ppc-ravenscar-thread.h \
1385         ppc-tdep.h \
1386         ppc64-tdep.h \
1387         probe.h \
1388         proc-utils.h \
1389         procfs.h \
1390         progspace.h \
1391         progspace-and-thread.h \
1392         prologue-value.h \
1393         psympriv.h \
1394         psymtab.h \
1395         ravenscar-thread.h \
1396         record.h \
1397         record-full.h \
1398         regcache.h \
1399         reggroups.h \
1400         regset.h \
1401         remote.h \
1402         remote-fileio.h \
1403         remote-notif.h \
1404         riscv-fbsd-tdep.h \
1405         riscv-ravenscar-thread.h \
1406         riscv-tdep.h \
1407         rs6000-aix-tdep.h \
1408         rs6000-tdep.h \
1409         run-on-main-thread.h \
1410         s390-linux-tdep.h \
1411         s390-tdep.h \
1412         score-tdep.h \
1413         selftest-arch.h \
1414         sentinel-frame.h \
1415         ser-base.h \
1416         ser-event.h \
1417         ser-tcp.h \
1418         ser-unix.h \
1419         serial.h \
1420         sh-tdep.h \
1421         sim-regno.h \
1422         skip.h \
1423         sol2-tdep.h \
1424         solib.h \
1425         solib-aix.h \
1426         solib-darwin.h \
1427         solib-svr4.h \
1428         solib-target.h \
1429         solist.h \
1430         source.h \
1431         source-cache.h \
1432         sparc-nat.h \
1433         sparc-ravenscar-thread.h \
1434         sparc-tdep.h \
1435         sparc64-tdep.h \
1436         stabsread.h \
1437         stack.h \
1438         stap-probe.h \
1439         symfile.h \
1440         symtab.h \
1441         target.h \
1442         target-dcache.h \
1443         target-descriptions.h \
1444         terminal.h \
1445         tid-parse.h \
1446         top.h \
1447         tracectf.h \
1448         tracefile.h \
1449         tracepoint.h \
1450         trad-frame.h \
1451         target-float.h \
1452         tramp-frame.h \
1453         type-stack.h \
1454         typeprint.h \
1455         ui-file.h \
1456         ui-out.h \
1457         ui-style.h \
1458         user-regs.h \
1459         utils.h \
1460         valprint.h \
1461         value.h \
1462         varobj.h \
1463         varobj-iter.h \
1464         vax-tdep.h \
1465         windows-nat.h \
1466         windows-tdep.h \
1467         x86-bsd-nat.h \
1468         x86-linux-nat.h \
1469         x86-nat.h \
1470         xcoffread.h \
1471         xml-builtin.h \
1472         xml-support.h \
1473         xml-syscall.h \
1474         xml-tdesc.h \
1475         xtensa-tdep.h \
1476         arch/aarch32.h \
1477         arch/aarch64.h \
1478         arch/aarch64-insn.h \
1479         arch/aarch64-mte-linux.h \
1480         arch/arc.h \
1481         arch/arm.h \
1482         arch/i386.h \
1483         arch/ppc-linux-common.h \
1484         arch/ppc-linux-tdesc.h \
1485         arch/riscv.h \
1486         cli/cli-cmds.h \
1487         cli/cli-decode.h \
1488         cli/cli-script.h \
1489         cli/cli-setshow.h \
1490         cli/cli-style.h \
1491         cli/cli-utils.h \
1492         compile/compile.h \
1493         compile/compile-c.h \
1494         compile/compile-cplus.h \
1495         compile/compile-internal.h \
1496         compile/compile-object-load.h \
1497         compile/compile-object-run.h \
1498         compile/gcc-c-plugin.h \
1499         compile/gcc-cp-plugin.h \
1500         config/nm-linux.h \
1501         config/nm-nto.h \
1502         config/djgpp/langinfo.h \
1503         config/djgpp/nl_types.h \
1504         config/i386/nm-i386gnu.h \
1505         config/sparc/nm-sol2.h \
1506         mi/mi-cmds.h \
1507         mi/mi-common.h \
1508         mi/mi-console.h \
1509         mi/mi-getopt.h \
1510         mi/mi-main.h \
1511         mi/mi-out.h \
1512         mi/mi-parse.h \
1513         nat/aarch64-linux.h \
1514         nat/aarch64-linux-hw-point.h \
1515         nat/aarch64-mte-linux-ptrace.h \
1516         nat/aarch64-sve-linux-ptrace.h \
1517         nat/amd64-linux-siginfo.h \
1518         nat/gdb_ptrace.h \
1519         nat/gdb_thread_db.h \
1520         nat/fork-inferior.h \
1521         nat/linux-btrace.h \
1522         nat/linux-namespaces.h \
1523         nat/linux-nat.h \
1524         nat/linux-osdata.h \
1525         nat/linux-personality.h \
1526         nat/linux-ptrace.h \
1527         nat/linux-waitpid.h \
1528         nat/mips-linux-watch.h \
1529         nat/ppc-linux.h \
1530         nat/x86-cpuid.h \
1531         nat/x86-dregs.h \
1532         nat/x86-gcc-cpuid.h \
1533         nat/x86-linux.h \
1534         nat/x86-linux-dregs.h \
1535         python/py-event.h \
1536         python/py-events.h \
1537         python/py-stopevent.h \
1538         python/python.h \
1539         python/python-internal.h \
1540         regformats/regdef.h \
1541         target/resume.h \
1542         target/target.h \
1543         target/wait.h \
1544         target/waitstatus.h \
1545         tui/tui.h \
1546         tui/tui-command.h \
1547         tui/tui-data.h \
1548         tui/tui-disasm.h \
1549         tui/tui-file.h \
1550         tui/tui-hooks.h \
1551         tui/tui-io.h \
1552         tui/tui-layout.h \
1553         tui/tui-location.h \
1554         tui/tui-out.h \
1555         tui/tui-regs.h \
1556         tui/tui-source.h \
1557         tui/tui-stack.h \
1558         tui/tui-win.h \
1559         tui/tui-wingeneral.h \
1560         tui/tui-winsource.h \
1561         x86-tdep.h
1562
1563 # Header files that already have srcdir in them, or which are in objdir.
1564
1565 HFILES_WITH_SRCDIR = \
1566         ../bfd/bfd.h \
1567         jit-reader.h
1568
1569 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
1570 # default their values the way we do for SER_HARDWIRE; in the future
1571 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
1572 # variables analogous to SER_HARDWIRE which get defaulted in this
1573 # Makefile.in
1574
1575 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) $(SIM_OBS)
1576
1577 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
1578 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
1579 # and it's more useful to see it in the .y file.
1580 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
1581         $(CONFIG_SRCS)
1582 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1583
1584 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
1585         mi/mi-common.o \
1586         version.o \
1587         xml-builtin.o \
1588         $(patsubst %.c,%.o,$(COMMON_SFILES)) \
1589         $(SUBDIR_CLI_OBS) \
1590         $(SUBDIR_TARGET_OBS) \
1591         $(SUBDIR_GCC_COMPILE_OBS)
1592
1593 SUBDIRS = doc @subdirs@ data-directory testsuite
1594 CLEANDIRS = $(SUBDIRS)
1595
1596 # List of subdirectories in the build tree that must exist.
1597 # This is used to force build failures in existing trees when
1598 # a new directory is added.
1599 # The format here is for the `case' shell command.
1600 REQUIRED_SUBDIRS = doc | testsuite | data-directory
1601
1602 # Parser intermediate files.
1603 YYFILES = \
1604         ada-exp.c \
1605         ada-lex.c \
1606         c-exp.c \
1607         cp-name-parser.c \
1608         d-exp.c \
1609         f-exp.c \
1610         go-exp.c \
1611         m2-exp.c \
1612         p-exp.c
1613
1614 # ada-lex.c is included by another file, so it shouldn't wind up as a
1615 # .o itself.
1616 YYOBJ = $(filter-out ada-lex.o,$(patsubst %.c,%.o,$(YYFILES)))
1617
1618 # Things which need to be built when making a distribution.
1619
1620 DISTSTUFF = $(YYFILES)
1621
1622
1623 # All generated files which can be included by another file.
1624 generated_files = \
1625         ada-lex.c \
1626         config.h \
1627         jit-reader.h \
1628         $(NAT_GENERATED_FILES) \
1629         $(NM_H)
1630
1631 # Flags needed to compile Python code
1632 PYTHON_CFLAGS = @PYTHON_CFLAGS@
1633
1634 all: gdb$(EXEEXT) $(CONFIG_ALL) gdb-gdb.py gdb-gdb.gdb
1635         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=$(SUBDIRS)" subdir_do
1636
1637 # Rule for compiling .c files in the top-level gdb directory.
1638 # The order-only dependencies ensure that we create the build subdirectories.
1639 %.o: %.c | $(CONFIG_DEP_SUBDIR)
1640         $(COMPILE) $<
1641         $(POSTCOMPILE)
1642
1643 $(CONFIG_DEP_SUBDIR):
1644         $(SHELL) $(srcdir)/../mkinstalldirs $@
1645
1646 # Python files need special flags.
1647 python/%.o: INTERNAL_CFLAGS += $(PYTHON_CFLAGS)
1648
1649 # Rules for compiling .c files in the various source subdirectories.
1650 %.o: $(srcdir)/gdbtk/generic/%.c
1651         $(COMPILE) $(all_gdbtk_cflags) $<
1652         $(POSTCOMPILE)
1653
1654 installcheck:
1655
1656 # The check target can not use subdir_do, because subdir_do does not
1657 # use TARGET_FLAGS_TO_PASS.
1658 check: force
1659         @if [ -f testsuite/Makefile ]; then \
1660           rootme=`pwd`; export rootme; \
1661           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1662           cd testsuite; \
1663           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
1664         else true; fi
1665
1666 check-perf: force
1667         @if [ -f testsuite/Makefile ]; then \
1668           rootme=`pwd`; export rootme; \
1669           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1670           cd testsuite; \
1671           $(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
1672         else true; fi
1673
1674 check-read1: force
1675         @if [ -f testsuite/Makefile ]; then \
1676           rootme=`pwd`; export rootme; \
1677           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1678           cd testsuite; \
1679           $(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
1680         else true; fi
1681
1682 check-parallel: force
1683         @if [ -f testsuite/Makefile ]; then \
1684           rootme=`pwd`; export rootme; \
1685           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1686           cd testsuite; \
1687           $(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
1688         else true; fi
1689
1690 # The idea is to parallelize testing of multilibs, for example:
1691 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
1692 # will run 3 concurrent sessions of check, eventually testing all 10
1693 # combinations.  GNU make is required for the % pattern to work, as is
1694 # a shell that expands alternations within braces.  If GNU make is not
1695 # used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
1696 # prevent serialized checking due to the passed RUNTESTFLAGS.
1697 # FIXME: use config.status --config not --version, when available.
1698 check//%: force
1699         @if [ -f testsuite/config.status ]; then \
1700           rootme=`pwd`; export rootme; \
1701           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
1702           target=`echo "$@" | sed 's,//.*,,'`; \
1703           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
1704           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
1705           testdir=testsuite.$$vardots; \
1706           if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
1707             configargs=`cd testsuite && ./config.status --version | \
1708               sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
1709             $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
1710             (cd $$testdir && \
1711              eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
1712                            "\"--srcdir=\$$rootsrc/testsuite\"" \
1713              ); \
1714           else :; fi && cd $$testdir && \
1715           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
1716             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
1717             FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
1718             "$$target"; \
1719         else true; fi
1720
1721 # The set of headers checked by 'check-headers' by default.
1722 CHECK_HEADERS = $(HFILES_NO_SRCDIR)
1723
1724 # Try to compile each header in isolation, thus ensuring headers are
1725 # self-contained.
1726 #
1727 # Defaults to checking all $HFILES_NO_SRCDIR headers.
1728 #
1729 # Do:
1730 #
1731 #    make check-headers CHECK_HEADERS="header.h list.h"
1732 #
1733 # to check specific headers.
1734 #
1735 check-headers:
1736         @echo Checking headers.
1737         for i in $(CHECK_HEADERS) ; do \
1738                 $(CXX) $(CXX_DIALECT) -x c++-header -c -fsyntax-only \
1739                 $(INTERNAL_CFLAGS) $(CXXFLAGS) -include defs.h $(srcdir)/$$i ; \
1740         done
1741 .PHONY: check-headers
1742
1743 info install-info clean-info dvi pdf install-pdf html install-html: force
1744         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
1745
1746 # Traditionally "install" depends on "all".  But it may be useful
1747 # not to; for example, if the user has made some trivial change to a
1748 # source file and doesn't care about rebuilding or just wants to save the
1749 # time it takes for make to check that all is up to date.
1750 # install-only is intended to address that need.
1751 install: all
1752         @$(MAKE) $(FLAGS_TO_PASS) install-only
1753
1754 install-only: $(CONFIG_INSTALL)
1755         transformed_name=`t='$(program_transform_name)'; \
1756                           echo gdb | sed -e "$$t"` ; \
1757                 if test "x$$transformed_name" = x; then \
1758                   transformed_name=gdb ; \
1759                 else \
1760                   true ; \
1761                 fi ; \
1762                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1763                 $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) gdb$(EXEEXT) \
1764                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1765                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
1766                 $(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
1767         if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1768         then \
1769           transformed_name=`t='$(program_transform_name)'; \
1770                             echo gcore | sed -e "$$t"` ; \
1771                   if test "x$$transformed_name" = x; then \
1772                     transformed_name=gcore ; \
1773                   else \
1774                     true ; \
1775                   fi ; \
1776                   $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1777                   $(INSTALL_SCRIPT) gcore \
1778                           $(DESTDIR)$(bindir)/$$transformed_name; \
1779         fi
1780         transformed_name=`t='$(program_transform_name)'; \
1781                           echo gdb-add-index | sed -e "$$t"` ; \
1782         if test "x$$transformed_name" = x; then \
1783           transformed_name=gdb-add-index ; \
1784         else \
1785           true ; \
1786         fi ; \
1787         $(INSTALL_SCRIPT) $(srcdir)/contrib/gdb-add-index.sh \
1788                 $(DESTDIR)$(bindir)/$$transformed_name
1789         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1790
1791 install-strip:
1792         $(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1793           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1794           `test -z '$(STRIP)' || \
1795             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
1796
1797 install-guile:
1798         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
1799
1800 install-python:
1801         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
1802
1803 uninstall: force $(CONFIG_UNINSTALL)
1804         transformed_name=`t='$(program_transform_name)'; \
1805                           echo gdb | sed -e $$t` ; \
1806                 if test "x$$transformed_name" = x; then \
1807                   transformed_name=gdb ; \
1808                 else \
1809                   true ; \
1810                 fi ; \
1811                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1812                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1813         if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
1814         then \
1815           transformed_name=`t='$(program_transform_name)'; \
1816                             echo gcore | sed -e "$$t"` ; \
1817                   if test "x$$transformed_name" = x; then \
1818                     transformed_name=gcore ; \
1819                   else \
1820                     true ; \
1821                   fi ; \
1822                   rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
1823         fi
1824         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1825
1826 # The C++ name parser can be built standalone for testing.
1827 test-cp-name-parser.o: cp-name-parser.c
1828         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1829         $(POSTCOMPILE)
1830
1831 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1832         $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) \
1833                 -o test-cp-name-parser$(EXEEXT) test-cp-name-parser.o \
1834                 $(LIBIBERTY)
1835
1836 # We do this by grepping through sources.  If that turns out to be too slow,
1837 # maybe we could just require every .o file to have an initialization routine
1838 # of a given name (top.o -> _initialize_top, etc.).
1839 #
1840 # Note that the set of files with init functions might change, or the names
1841 # of the functions might change, so this files needs to depend on all the
1842 # source files that will be linked into gdb.  However, due to the way
1843 # this Makefile has generally been written, we do this indirectly, by
1844 # computing the list of source files from the list of object files.
1845
1846 INIT_FILES_FILTER_OUT = \
1847         cp-name-parser.o \
1848         init.o \
1849         version.o \
1850         xml-builtin.o \
1851         %_S.o \
1852         %_U.o
1853
1854 INIT_FILES = \
1855         $(patsubst %.o,%.c, \
1856           $(patsubst %-exp.o,%-exp.y, \
1857             $(filter-out $(INIT_FILES_FILTER_OUT), $(COMMON_OBS))))
1858
1859 init.c: stamp-init; @true
1860 stamp-init: $(INIT_FILES) config.status $(srcdir)/make-init-c
1861         $(ECHO_INIT_C)
1862         $(SILENCE) $(srcdir)/make-init-c $(addprefix $(srcdir)/,$(INIT_FILES)) > init.c-tmp
1863         $(SILENCE) $(SHELL) $(srcdir)/../move-if-change init.c-tmp init.c
1864         $(SILENCE) echo stamp > stamp-init
1865
1866 .PRECIOUS: init.c
1867
1868 # Create a library of the gdb object files and build GDB by linking
1869 # against that.
1870 #
1871 # init.o is very important.  It pulls in the rest of GDB.
1872 LIBGDB_OBS = $(sort $(COMMON_OBS)) init.o
1873 libgdb.a: $(LIBGDB_OBS)
1874         -rm -f libgdb.a
1875         $(AR) q libgdb.a $(LIBGDB_OBS)
1876         $(RANLIB) libgdb.a
1877
1878 # Removing the old gdb first works better if it is running, at least on SunOS.
1879 gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(CDEPS) $(TDEPLIBS)
1880         $(SILENCE) rm -f gdb$(EXEEXT)
1881         $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1882                 -o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
1883                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1884 ifneq ($(CODESIGN_CERT),)
1885         $(ECHO_SIGN) $(CODESIGN) -s $(CODESIGN_CERT) gdb$(EXEEXT)
1886 endif
1887
1888 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1889 # on itself without copying the executable.  So "make gdb1" will make
1890 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1891 # Removing gdb1 before the copy is the right thing if gdb1 is open
1892 # in another process.
1893 gdb1$(EXEEXT): gdb$(EXEEXT)
1894         rm -f gdb1$(EXEEXT)
1895         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1896
1897 # Put the proper machine-specific files first, so M-. on a machine
1898 # specific routine gets the one for the correct machine.  (FIXME: those
1899 # files go in twice; we should be removing them from the main list).
1900
1901 # TAGS depends on all the files that go into it so you can rebuild TAGS
1902 # with `make TAGS' and not have to say `rm TAGS' first.
1903
1904 GDB_NM_FILE = @GDB_NM_FILE@
1905 TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1906         @echo Making TAGS
1907         etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
1908         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1909                 echo $(srcdir)/$$i ; \
1910         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1911                 echo $$i ; \
1912         done) | sed -e 's/\.o$$/\.c/'` \
1913         `find $(srcdir)/config -name '*.h' -print`
1914
1915 tags: TAGS
1916
1917 clean mostlyclean: $(CONFIG_CLEAN)
1918         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1919         rm -f *.o *.a *~ init.c-tmp init.l-tmp version.c-tmp
1920         rm -f init.c stamp-init version.c stamp-version
1921         rm -f gdb$(EXEEXT) core make.log
1922         rm -f gdb[0-9]$(EXEEXT)
1923         rm -f test-cp-name-parser$(EXEEXT)
1924         rm -f xml-builtin.c stamp-xml
1925         rm -f $(DEPDIR)/*
1926         for i in $(CONFIG_SRC_SUBDIR); do \
1927                 rm -f $$i/*.o;  \
1928                 rm -f $$i/$(DEPDIR)/*; \
1929         done
1930
1931 # This used to depend on c-exp.c m2-exp.c TAGS
1932 # I believe this is wrong; the makefile standards for distclean just
1933 # describe removing files; the only sort of "re-create a distribution"
1934 # functionality described is if the distributed files are unmodified.
1935 distclean: clean
1936         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1937         rm -f nm.h config.status config.h stamp-h b jit-reader.h
1938         rm -f gdb-gdb.py gdb-gdb.gdb
1939         rm -f y.output yacc.acts yacc.tmp y.tab.h
1940         rm -f config.log config.cache
1941         rm -f Makefile
1942         rm -rf $(DEPDIR)
1943         for i in $(CONFIG_SRC_SUBDIR); do \
1944                 if test -d $$i/$(DEPDIR); then rmdir $$i/$(DEPDIR); fi \
1945         done
1946
1947 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1948 realclean: maintainer-clean
1949
1950 local-maintainer-clean:
1951         @echo "This command is intended for maintainers to use;"
1952         @echo "it deletes files that may require special tools to rebuild."
1953         rm -f c-exp.c \
1954                 cp-name-parser.c \
1955                 ada-lex.c ada-exp.c \
1956                 d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c
1957         rm -f TAGS
1958         rm -f $(YYFILES)
1959         rm -f nm.h config.status
1960
1961 do-maintainer-clean:
1962         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1963                 subdir_do
1964
1965 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1966         cd doc; $(MAKE) $(MFLAGS) diststuff
1967
1968 subdir_do: force
1969         @for i in $(DODIRS); do \
1970                 case $$i in \
1971                 $(REQUIRED_SUBDIRS)) \
1972                         if [ ! -f ./$$i/Makefile ] ; then \
1973                                 echo "Missing $$i/Makefile" >&2 ; \
1974                                 exit 1 ; \
1975                         fi ;; \
1976                 esac ; \
1977                 if [ -f ./$$i/Makefile ] ; then \
1978                         if (cd ./$$i; \
1979                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1980                         else exit 1 ; fi ; \
1981                 else true ; fi ; \
1982         done
1983
1984 Makefile: Makefile.in config.status
1985         $(SHELL) config.status $@
1986
1987 .PHONY: run
1988 run: Makefile
1989         ./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
1990
1991 jit-reader.h: $(srcdir)/jit-reader.in
1992         $(SHELL) config.status $@
1993
1994 gcore: $(srcdir)/gcore.in
1995         $(SHELL) config.status $@
1996
1997 gdb-gdb.py: $(srcdir)/gdb-gdb.py.in
1998         $(SHELL) config.status $@
1999
2000 gdb-gdb.gdb: $(srcdir)/gdb-gdb.gdb.in
2001         $(SHELL) config.status $@
2002
2003 config.h: stamp-h ; @true
2004 stamp-h: $(srcdir)/config.in config.status
2005         $(SHELL) config.status config.h
2006
2007 nm.h: stamp-nmh ; @true
2008 stamp-nmh: config.status
2009         $(SHELL) config.status nm.h
2010
2011 config.status: $(srcdir)/configure configure.nat configure.tgt configure.host ../bfd/development.sh
2012         $(SHELL) config.status --recheck
2013
2014 ACLOCAL = aclocal
2015 ACLOCAL_AMFLAGS = -I ../config
2016
2017 # Keep these in sync with the includes in acinclude.m4.
2018 aclocal_m4_deps = \
2019         configure.ac \
2020         acx_configure_dir.m4 \
2021         transform.m4 \
2022         ../bfd/bfd.m4 \
2023         ../config/acinclude.m4 \
2024         ../config/enable.m4 \
2025         ../config/plugins.m4 \
2026         ../config/lead-dot.m4 \
2027         ../config/override.m4 \
2028         ../config/largefile.m4 \
2029         ../config/gettext-sister.m4 \
2030         ../config/lib-ld.m4 \
2031         ../config/lib-prefix.m4 \
2032         ../config/lib-link.m4 \
2033         ../config/acx.m4 \
2034         ../config/tcl.m4 \
2035         ../config/depstand.m4 \
2036         ../config/lcmessage.m4 \
2037         ../config/codeset.m4 \
2038         ../config/zlib.m4 \
2039         ../config/ax_pthread.m4
2040
2041 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
2042         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
2043
2044 AUTOCONF = autoconf
2045 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
2046 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2047         cd $(srcdir) && $(AUTOCONF)
2048
2049 AUTOHEADER = autoheader
2050 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
2051         cd $(srcdir) && $(AUTOHEADER)
2052         rm -f stamp-h
2053         touch $@
2054
2055 # automatic rebuilding in automake-generated Makefiles requires
2056 # this rule in the toplevel Makefile, which, with GNU make, causes
2057 # the desired updates through the implicit regeneration of the Makefile
2058 # and all of its prerequisites.
2059 am--refresh:
2060         @:
2061
2062 force:
2063
2064 # Documentation!
2065 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
2066 doc/refcard.dvi:
2067         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
2068
2069 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
2070 doc/refcard.ps:
2071         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
2072
2073 # GDB MANUAL: TeX dvi file
2074 doc/gdb.dvi:
2075         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
2076
2077 # GDB MANUAL: info file
2078 doc/gdb.info:
2079         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
2080
2081 # Make copying.c from COPYING
2082 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
2083         awk -f $(srcdir)/copying.awk \
2084                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
2085         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
2086
2087 version.c: stamp-version; @true
2088 # Note that the obvious names for the temp file are taken by
2089 # create-version.sh.
2090 stamp-version: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/../gdbsupport/create-version.sh
2091         $(ECHO_GEN) $(SHELL) $(srcdir)/../gdbsupport/create-version.sh $(srcdir) \
2092             $(host_alias) $(target_alias) version-t.t
2093         @$(SHELL) $(srcdir)/../move-if-change version-t.t version.c
2094         @echo stamp > stamp-version
2095
2096
2097 gdb.cxref: $(SFILES)
2098         cxref -I. $(SFILES) >gdb.cxref
2099
2100 force_update:
2101
2102 # GNU Make has an annoying habit of putting *all* the Makefile variables
2103 # into the environment, unless you include this target as a circumvention.
2104 # Rumor is that this will be fixed (and this target can be removed)
2105 # in GNU Make 4.0.
2106 .NOEXPORT:
2107
2108 # GNU Make 3.63 has a different problem: it keeps tacking command line
2109 # overrides onto the definition of $(MAKE).  This variable setting
2110 # will remove them.
2111 MAKEOVERRIDES =
2112
2113 ALLDEPFILES = \
2114         aarch32-tdep.c \
2115         aarch64-fbsd-nat.c \
2116         aarch64-fbsd-tdep.c \
2117         aarch64-linux-nat.c \
2118         aarch64-linux-tdep.c \
2119         aarch64-newlib-tdep.c \
2120         aarch64-ravenscar-thread.c \
2121         aarch64-tdep.c \
2122         aix-thread.c \
2123         alpha-bsd-nat.c \
2124         alpha-bsd-tdep.c \
2125         alpha-linux-nat.c \
2126         alpha-linux-tdep.c \
2127         alpha-mdebug-tdep.c \
2128         alpha-netbsd-tdep.c \
2129         alpha-obsd-tdep.c \
2130         alpha-tdep.c \
2131         amd64-bsd-nat.c \
2132         amd64-darwin-tdep.c \
2133         amd64-dicos-tdep.c \
2134         amd64-fbsd-nat.c \
2135         amd64-fbsd-tdep.c \
2136         amd64-linux-nat.c \
2137         amd64-linux-tdep.c \
2138         amd64-nat.c \
2139         amd64-netbsd-nat.c \
2140         amd64-netbsd-tdep.c \
2141         amd64-obsd-nat.c \
2142         amd64-obsd-tdep.c \
2143         amd64-ravenscar-thread.c \
2144         amd64-sol2-tdep.c \
2145         amd64-tdep.c \
2146         arc-linux-nat.c \
2147         arc-tdep.c \
2148         arm.c \
2149         arm-bsd-tdep.c \
2150         arm-fbsd-nat.c \
2151         arm-fbsd-tdep.c \
2152         arm-get-next-pcs.c \
2153         arm-linux.c \
2154         arm-linux-nat.c \
2155         arm-linux-tdep.c \
2156         arm-netbsd-nat.c \
2157         arm-netbsd-tdep.c \
2158         arm-none-tdep.c \
2159         arm-obsd-tdep.c \
2160         arm-tdep.c \
2161         avr-tdep.c \
2162         bfin-linux-tdep.c \
2163         bfin-tdep.c \
2164         bpf-tdep.c \
2165         bsd-kvm.c \
2166         bsd-uthread.c \
2167         csky-linux-tdep.c \
2168         csky-tdep.c \
2169         darwin-nat.c \
2170         dicos-tdep.c \
2171         fbsd-nat.c \
2172         fbsd-tdep.c \
2173         fork-child.c \
2174         ft32-tdep.c \
2175         glibc-tdep.c \
2176         go32-nat.c \
2177         h8300-tdep.c \
2178         hppa-bsd-tdep.c \
2179         hppa-linux-nat.c \
2180         hppa-linux-tdep.c \
2181         hppa-netbsd-nat.c \
2182         hppa-netbsd-tdep.c \
2183         hppa-obsd-nat.c \
2184         hppa-obsd-tdep.c \
2185         hppa-tdep.c \
2186         i386-bsd-nat.c \
2187         i386-bsd-tdep.c \
2188         i386-darwin-nat.c \
2189         i386-darwin-tdep.c \
2190         i386-dicos-tdep.c \
2191         i386-fbsd-nat.c \
2192         i386-fbsd-tdep.c \
2193         i386-gnu-nat.c \
2194         i386-gnu-tdep.c \
2195         i386-linux-nat.c \
2196         i386-linux-tdep.c \
2197         i386-netbsd-nat.c \
2198         i386-netbsd-tdep.c \
2199         i386-obsd-nat.c \
2200         i386-obsd-tdep.c \
2201         i386-sol2-nat.c \
2202         i386-sol2-tdep.c \
2203         i386-tdep.c \
2204         i386-windows-tdep.c \
2205         i387-tdep.c \
2206         ia64-libunwind-tdep.c \
2207         ia64-linux-nat.c \
2208         ia64-linux-tdep.c \
2209         ia64-tdep.c \
2210         ia64-vms-tdep.c \
2211         inf-ptrace.c \
2212         linux-fork.c \
2213         linux-record.c \
2214         linux-tdep.c \
2215         lm32-tdep.c \
2216         m32r-linux-nat.c \
2217         m32r-linux-tdep.c \
2218         m32r-tdep.c \
2219         m68hc11-tdep.c \
2220         m68k-bsd-nat.c \
2221         m68k-bsd-tdep.c \
2222         m68k-linux-nat.c \
2223         m68k-linux-tdep.c \
2224         m68k-tdep.c \
2225         microblaze-linux-tdep.c \
2226         microblaze-tdep.c \
2227         mingw-hdep.c \
2228         mips-fbsd-nat.c \
2229         mips-fbsd-tdep.c \
2230         mips-linux-nat.c \
2231         mips-linux-tdep.c \
2232         mips-netbsd-nat.c \
2233         mips-netbsd-tdep.c \
2234         mips-sde-tdep.c \
2235         mips-tdep.c \
2236         mips64-obsd-nat.c \
2237         mips64-obsd-tdep.c \
2238         msp430-tdep.c \
2239         netbsd-nat.c \
2240         netbsd-tdep.c \
2241         nds32-tdep.c \
2242         nios2-linux-tdep.c \
2243         nios2-tdep.c \
2244         obsd-nat.c \
2245         obsd-tdep.c \
2246         posix-hdep.c \
2247         ppc-fbsd-nat.c \
2248         ppc-fbsd-tdep.c \
2249         ppc-linux-nat.c \
2250         ppc-linux-tdep.c \
2251         ppc-netbsd-nat.c \
2252         ppc-netbsd-tdep.c \
2253         ppc-obsd-nat.c \
2254         ppc-obsd-tdep.c \
2255         ppc-ravenscar-thread.c \
2256         ppc-sysv-tdep.c \
2257         ppc64-tdep.c \
2258         procfs.c \
2259         ravenscar-thread.c \
2260         remote-sim.c \
2261         riscv-fbsd-nat.c \
2262         riscv-fbsd-tdep.c \
2263         riscv-linux-nat.c \
2264         riscv-linux-tdep.c \
2265         riscv-none-tdep.c \
2266         riscv-ravenscar-thread.c \
2267         riscv-tdep.c \
2268         rl78-tdep.c \
2269         rs6000-lynx178-tdep.c \
2270         rs6000-nat.c \
2271         rs6000-tdep.c \
2272         rx-tdep.c \
2273         s390-linux-nat.c \
2274         s390-linux-tdep.c \
2275         s390-tdep.c \
2276         score-tdep.c \
2277         ser-go32.c \
2278         ser-mingw.c \
2279         ser-pipe.c \
2280         ser-tcp.c \
2281         ser-uds.c \
2282         sh-netbsd-nat.c \
2283         sh-netbsd-tdep.c \
2284         sh-tdep.c \
2285         sol2-tdep.c \
2286         solib-aix.c \
2287         solib-svr4.c \
2288         sparc-linux-nat.c \
2289         sparc-linux-tdep.c \
2290         sparc-nat.c \
2291         sparc-netbsd-nat.c \
2292         sparc-netbsd-tdep.c \
2293         sparc-obsd-tdep.c \
2294         sparc-ravenscar-thread.c \
2295         sparc-sol2-nat.c \
2296         sparc-sol2-tdep.c \
2297         sparc-tdep.c \
2298         sparc64-fbsd-nat.c \
2299         sparc64-fbsd-tdep.c \
2300         sparc64-linux-nat.c \
2301         sparc64-linux-tdep.c \
2302         sparc64-nat.c \
2303         sparc64-netbsd-nat.c \
2304         sparc64-netbsd-tdep.c \
2305         sparc64-obsd-nat.c \
2306         sparc64-obsd-tdep.c \
2307         sparc64-sol2-tdep.c \
2308         sparc64-tdep.c \
2309         tilegx-linux-nat.c \
2310         tilegx-linux-tdep.c \
2311         tilegx-tdep.c \
2312         v850-tdep.c \
2313         vax-bsd-nat.c \
2314         vax-netbsd-tdep.c \
2315         vax-tdep.c \
2316         windows-nat.c \
2317         windows-tdep.c \
2318         x86-nat.c \
2319         x86-tdep.c \
2320         xcoffread.c \
2321         xstormy16-tdep.c \
2322         xtensa-config.c \
2323         xtensa-linux-nat.c \
2324         xtensa-linux-tdep.c \
2325         xtensa-tdep.c \
2326         xtensa-xtregs.c
2327
2328 # Some files need explicit build rules (due to -Werror problems) or due
2329 # to sub-directory fun 'n' games.
2330
2331 # ada-exp.c can appear in srcdir, for releases; or in ., for
2332 # development builds.
2333 ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
2334
2335 ada-exp.o: ada-exp.c
2336         $(COMPILE) $(ADA_EXP_C)
2337         $(POSTCOMPILE)
2338
2339 # Message files.  Based on code in gcc/Makefile.in.
2340
2341 # Rules for generating translated message descriptions.  Disabled by
2342 # autoconf if the tools are not available.
2343
2344 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
2345
2346 all-po: $(CATALOGS)
2347
2348 # This notation should be acceptable to all Make implementations used
2349 # by people who are interested in updating .po files.
2350 update-po: $(CATALOGS:.gmo=.pox)
2351
2352 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
2353 # script does that.
2354 %.gmo: %.po
2355         -test -d po || mkdir po
2356         $(GMSGFMT) --statistics -o $@ $<
2357
2358 # The new .po has to be gone over by hand, so we deposit it into
2359 # build/po with a different extension.  If build/po/$(PACKAGE).pot
2360 # exists, use it (it was just created), else use the one in srcdir.
2361 %.pox: %.po
2362         -test -d po || mkdir po
2363         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
2364                         then echo po/$(PACKAGE).pot; \
2365                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
2366
2367 # This rule has to look for .gmo modules in both srcdir and the cwd,
2368 # and has to check that we actually have a catalog for each language,
2369 # in case they weren't built or included with the distribution.
2370 install-po:
2371         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
2372         cats="$(CATALOGS)"; for cat in $$cats; do \
2373           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2374           if [ -f $$cat ]; then :; \
2375           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2376           else continue; \
2377           fi; \
2378           dir=$(localedir)/$$lang/LC_MESSAGES; \
2379           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
2380           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
2381           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2382           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
2383         done
2384 uninstall-po:
2385         cats="$(CATALOGS)"; for cat in $$cats; do \
2386           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
2387           if [ -f $$cat ]; then :; \
2388           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
2389           else continue; \
2390           fi; \
2391           dir=$(localedir)/$$lang/LC_MESSAGES; \
2392           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
2393         done
2394 # Delete po/*.gmo only if we are not building in the source directory.
2395 clean-po:
2396         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
2397
2398 # Rule for regenerating the message template (gdb.pot).  Instead of
2399 # forcing everyone to edit POTFILES.in, which proved impractical, this
2400 # rule has no dependencies and always regenerates gdb.pot.  This is
2401 # relatively harmless since the .po files do not directly depend on
2402 # it.  The .pot file is left in the build directory.  Since GDB's
2403 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
2404 # files) force this rule.
2405 $(PACKAGE).pot: po/$(PACKAGE).pot
2406 po/$(PACKAGE).pot: force
2407         -test -d po || mkdir po
2408         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
2409
2410
2411 #
2412 # YACC/LEX dependencies
2413 #
2414 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
2415 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
2416 # said LANG-exp.c rather than ./c-exp.c some makes would
2417 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
2418 # decls for malloc/realloc/free which conflict with everything else.
2419 # Strictly speaking c-exp.c should therefore depend on
2420 # Makefile.in, but that was a pretty big annoyance.
2421
2422 %.c: %.y
2423         $(ECHO_YACC) $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- \
2424                 $(YACC) $(YFLAGS) || (rm -f $@.tmp; false)
2425         @sed -e '/extern.*malloc/d' \
2426              -e '/extern.*realloc/d' \
2427              -e '/extern.*free/d' \
2428              -e '/include.*malloc.h/d' \
2429              -e 's/\([^x]\)malloc/\1xmalloc/g' \
2430              -e 's/\([^x]\)realloc/\1xrealloc/g' \
2431              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2432              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2433              -e '/^#line.*y.tab.c/d' \
2434              -e 's/YY_NULL/YY_NULLPTR/g' \
2435           < $@.tmp > $@.new && \
2436           rm -f $@.tmp && \
2437           mv $@.new $@
2438 %.c: %.l
2439         $(ECHO_LEX) $(FLEX) -t $<  \
2440             | sed -e '/extern.*malloc/d' \
2441                 -e '/extern.*realloc/d' \
2442                 -e '/extern.*free/d' \
2443                 -e '/include.*malloc.h/d' \
2444                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
2445                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
2446                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
2447                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
2448                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
2449               > $@.new && \
2450             mv $@.new $@
2451
2452 .PRECIOUS: ada-lex.c
2453
2454 # XML rules
2455
2456 xml-builtin.c: stamp-xml; @true
2457 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
2458         $(SILENCE) rm -f xml-builtin.tmp
2459         $(ECHO_GEN_XML_BUILTIN) AWK="$(AWK)" \
2460           $(SHELL) $(srcdir)/features/feature_to_c.sh \
2461           xml-builtin.tmp $(XMLFILES)
2462         $(SILENCE) $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
2463         $(SILENCE) echo stamp > stamp-xml
2464
2465 .PRECIOUS: xml-builtin.c
2466
2467 #
2468 # GDBTK sub-directory
2469 #
2470
2471 all-gdbtk: insight$(EXEEXT)
2472
2473 install-gdbtk:
2474         transformed_name=`t='$(program_transform_name)'; \
2475                   echo insight | sed -e $$t` ; \
2476         if test "x$$transformed_name" = x; then \
2477           transformed_name=insight ; \
2478         else \
2479           true ; \
2480         fi ; \
2481         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
2482         $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) insight$(EXEEXT) \
2483                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2484         $(SHELL) $(srcdir)/../mkinstalldirs \
2485                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
2486         $(SHELL) $(srcdir)/../mkinstalldirs \
2487                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
2488         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
2489                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
2490         $(SHELL) $(srcdir)/../mkinstalldirs \
2491                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
2492                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
2493         $(SHELL) $(srcdir)/../mkinstalldirs \
2494                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
2495                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
2496                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
2497         cd $(srcdir)/gdbtk/library ; \
2498         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
2499           do \
2500                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
2501           done ;
2502
2503 uninstall-gdbtk:
2504         transformed_name=`t='$(program_transform_name)'; \
2505                   echo insight | sed -e $$t` ; \
2506         if test "x$$transformed_name" = x; then \
2507                 transformed_name=insight ; \
2508         else \
2509                 true ; \
2510         fi ; \
2511         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
2512         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
2513
2514 clean-gdbtk:
2515         rm -f insight$(EXEEXT)
2516
2517 # Removing the old gdb first works better if it is running, at least on SunOS.
2518 insight$(EXEEXT): gdbtk-main.o libgdb.a $(CDEPS) $(TDEPLIBS)
2519         rm -f insight$(EXEEXT)
2520         $(ECHO_CXXLD) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
2521                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
2522                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
2523
2524 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
2525         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
2526
2527 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
2528                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
2529                 $(GDBTK_CFLAGS) \
2530                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
2531                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
2532
2533 #
2534 # Dependency tracking.
2535 #
2536
2537 ifeq ($(DEPMODE),depmode=gcc3)
2538 # Note that we put the dependencies into a .Tpo file, then move them
2539 # into place if the compile succeeds.  We need this because gcc does
2540 # not atomically write the dependency output file.
2541 override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2542         -MF $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo
2543 override POSTCOMPILE = @mv $(@D)/$(DEPDIR)/$(basename $(@F)).Tpo \
2544         $(@D)/$(DEPDIR)/$(basename $(@F)).Po
2545 else
2546 override COMPILE.pre = source='$<' object='$@' libtool=no \
2547         DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) \
2548         $(CXX) -x c++ $(CXX_DIALECT)
2549 # depcomp handles atomicity for us, so we don't need a postcompile
2550 # step.
2551 override POSTCOMPILE =
2552 endif
2553
2554 # A list of all the objects we might care about in this build, for
2555 # dependency tracking.
2556 all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
2557         test-cp-name-parser.o
2558
2559 # All the .deps files to include.
2560 all_deps_files = $(foreach dep,$(patsubst %.o,%.Po,$(all_object_files)),\
2561     $(dir $(dep))/$(DEPDIR)/$(notdir $(dep)))
2562
2563 # Ensure that generated files are created early.  Use order-only
2564 # dependencies if available.  They require GNU make 3.80 or newer,
2565 # and the .VARIABLES variable was introduced at the same time.
2566 ifdef .VARIABLES
2567 $(all_object_files): | $(generated_files)
2568 else
2569 $(all_object_files) : $(generated_files)
2570 endif
2571
2572 # Dependencies.
2573 -include $(all_deps_files)
2574
2575 # Disable implicit make rules.
2576 include $(srcdir)/disable-implicit-rules.mk
2577
2578 ### end of the gdb Makefile.in.