1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 bindir = $(prefix)/bin
22 datadir = $(prefix)/lib
23 libdir = $(prefix)/lib
24 mandir = $(datadir)/man
25 man1dir = $(mandir)/man1
26 man2dir = $(mandir)/man2
27 man3dir = $(mandir)/man3
28 man4dir = $(mandir)/man4
29 man5dir = $(mandir)/man5
30 man6dir = $(mandir)/man6
31 man7dir = $(mandir)/man7
32 man8dir = $(mandir)/man8
33 man9dir = $(mandir)/man9
34 infodir = $(datadir)/info
35 includedir = $(prefix)/include
36 docdir
= $(datadir)/doc
41 INSTALL_PROGRAM
= $(INSTALL
)
42 INSTALL_DATA
= $(INSTALL
)
48 # Flags that describe where you can find the termcap library.
49 # This can be overridden in the host Makefile fragment file.
52 #### Host, target, and site specific Makefile fragments come in here.
55 # Host and target-dependent makefile fragments come in here.
57 # End of host and target-dependent makefile fragments
59 # System V: If you compile gdb with a compiler which uses the coff
60 # encapsulation feature (this is a function of the compiler used, NOT
61 # of the m-?.h file selected by config.gdb), you must make sure that
62 # the GNU nm is the one that is used by munch.
64 # If you are compiling with GCC, make sure that either 1) You use the
65 # -traditional flag, or 2) You have the fixed include files where GCC
66 # can reach them. Otherwise the ioctl calls in inflow.c
67 # will be incorrectly compiled. The "fixincludes" script in the gcc
68 # distribution will fix your include files up.
73 # Directory containing source files. Don't clean up the spacing,
74 # this exact string is matched for by the "configure" script.
77 # It is also possible that you will need to add -I/usr/include/sys to the
78 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
79 # is where it should be according to Posix).
83 YACC
=$(BISON
) $(BISONFLAGS
)
87 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
88 # Berkeley/Sun don't have quite enough.
92 # where to find texinfo; GDB dist should include a recent one
93 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
95 # where to find makeinfo, preferably one designed for texinfo-2
98 # Set this up with gcc if you have gnu ld and the loader will print out
99 # line numbers for undefinded refs.
103 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
104 # (useful for debugging memory allocation problems in gdb). To use your
105 # system malloc, uncomment the following two lines.
107 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
108 GNU_MALLOC
= gmalloc.o mcheck.o mtrace.o
111 # Where is the "include" directory? Traditionally ../include or ./include
112 INCLUDE_DIR
= ${srcdir}/..
/include
113 INCLUDE_DEP
= $$(INCLUDE_DIR
)
115 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
116 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
117 BFD_DIR
= ${srcdir}/..
/bfd
118 BFD_DEP
= $$(BFD_DIR
)
119 BFD_LIB
= $(unsubdir
)/..
/bfd
${subdir}/libbfd.a
121 # Where is the source dir for the READLINE library? Traditionally in .. or .
122 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
123 READLINE_DIR
= ${srcdir}/..
/readline
124 READLINE_DEP
= $$(READLINE_DIR
)
125 RL_LIB
= $(unsubdir
)/..
/readline
${subdir}/libreadline.a
127 # All the includes used for CFLAGS and for lint.
128 # -I. for config files.
129 # -I${srcdir} possibly for regex.h also.
130 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
) -I
$(READLINE_DIR
) -I
${srcdir}/vx-share
132 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
135 GLOBAL_CFLAGS
= ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS}
136 #PROFILE_CFLAGS = -pg
138 CFLAGS
= ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
139 # None of the things in CFLAGS will do any harm, and on some systems
140 # (e.g. SunOS4) it is important to use the M_CFLAGS.
143 # Where is the "-liberty" library, containing getopt and obstack?
144 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
145 LIBIBERTY
= $(unsubdir
)/..
/libiberty
${subdir}/libiberty.a
147 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
148 # If your sysyem is missing alloca(), or, more likely, it's there but
149 # it doesn't work, define ALLOCA & ALLOCA1 too.
150 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
152 # Libraries and corresponding dependencies for compiling gdb.
153 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
154 # TERMCAP comes after readline, since readline depends on it.
155 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS}
156 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
158 ADD_FILES
= ${REGEX} ${ALLOCA} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
159 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
165 LINTFLAGS
= -I
${BFD_DIR}
167 # Source files in the main directory.
168 # Files which are included via a config/* Makefile fragment
169 # should *not* be specified here; they're in "ALLDEPFILES".
171 blockframe.c breakpoint.c command.c core.c \
172 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
174 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
175 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
176 signame.c cplus-dem.c mem-break.c target.c inftarg.c \
177 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
178 ieee-float.c language.c parse.c buildsym.c
180 # Source files in subdirectories (which will be handled separately by
182 # Files which are included via a config/* Makefile fragment
183 # should *not* be specified here; they're in "ALLDEPFILES".
185 ${srcdir}/vx-share
/dbgRpcLib.h \
186 ${srcdir}/vx-share
/ptrace.h \
187 ${srcdir}/vx-share
/reg.h \
188 ${srcdir}/vx-share
/vxTypes.h \
189 ${srcdir}/vx-share
/vxWorks.h \
190 ${srcdir}/vx-share
/wait.h \
191 ${srcdir}/vx-share
/xdr_ld.h \
192 ${srcdir}/vx-share
/xdr_ptrace.h \
193 ${srcdir}/vx-share
/xdr_rdb.h \
194 ${srcdir}/vx-share
/xdr_regs.h \
195 ${srcdir}/nindy-share
/b.out.h \
196 ${srcdir}/nindy-share
/block_io.h \
197 ${srcdir}/nindy-share
/coff.h \
198 ${srcdir}/nindy-share
/demux.h \
199 ${srcdir}/nindy-share
/env.h \
200 ${srcdir}/nindy-share
/stop.h \
201 ${srcdir}/nindy-share
/ttycntl.h
203 # Non-source files in subdirs, that should go into gdb.tar.Z.
205 ${srcdir}/nindy-share
/Makefile \
206 ${srcdir}/nindy-share
/VERSION
208 # All source files that go into linking GDB, except config-specified files.
209 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
211 # All source files that lint should look at
212 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
214 # Any additional files specified on these lines should also be added to
215 # the OTHERS = definition below, so they go in the tar files.
216 SFILES_STAND
= $(SFILES
) standalone.c
217 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
219 # Header files that are not named in config/* Makefile fragments go here.
220 HFILES
= breakpoint.h buildsym.h command.h defs.h environ.h \
221 expression.h frame.h gdbcmd.h gdbcore.h \
222 ieee-float.h inferior.h minimon.h \
223 signals.h signame.h symfile.h symtab.h \
224 target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-svr4.h \
225 xm-m68k.h xm-svr4.h language.h parser-defs.h value.h
227 # Header files for machine opcode tables.
228 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
229 # business, since they will be put into the GDB release files by somebody else.
231 OPCODES
= $(OPCODE_DIR
)pn-opcode.h
$(OPCODE_DIR
)np1-opcode.h \
232 $(OPCODE_DIR
)sparc-opcode.h
$(OPCODE_DIR
)vax-opcode.h \
233 $(OPCODE_DIR
)m68k-opcode.h
$(OPCODE_DIR
)ns32k-opcode.h \
234 $(OPCODE_DIR
)convx-opcode.h
$(OPCODE_DIR
)pyr-opcode.h \
235 $(OPCODE_DIR
)mips-opcode.h
$(OPCODE_DIR
)am29k-opcode.h \
236 $(OPCODE_DIR
)arm-opcode.h
$(OPCODE_DIR
)m88k-opcode.h \
237 $(OPCODE_DIR
)tahoe-opcode.h
$(OPCODE_DIR
)rs6k-opcode.h
239 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
241 MALLOCSRC
= gmalloc.c mcheck.c mtrace.c mtrace.awk \
244 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
$(MALLOCSRC
)
245 POSSLIBS
= $(POSSLIBS_MAINDIR
)
247 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
249 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
250 ChangeLog ChangeLog-3.x gdb
.1 refcard.ps \
251 README TODO TAGS WHATS.NEW Projects \
252 .gdbinit COPYING
$(YYFILES
) \
253 copying.c Convex.notes copying.awk \
254 saber.suppress standalone.c stuff.c kdb-start.c \
257 # Subdirectories of gdb, which should be included in their entirety in
259 TARDIRS
= doc
# tests
261 # GDB "info" files, which should be included in their entirety
262 INFOFILES
= gdb.
info*
264 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
266 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
267 TAGFILES
= $(SOURCES
) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
268 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
269 ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
270 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
272 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
273 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
274 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
275 command.o utils.o expprint.o environ.o version.o \
276 copying.o
$(DEPFILES
) signame.o cplus-dem.o mem-break.o target.o \
277 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
279 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o
# mipsread.o
281 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
283 TSOBS
= core.o inflow.o
285 NTSOBS
= standalone.o
287 TSSTART
= /lib
/crt0.o
289 NTSSTART
= kdb-start.o
293 # For now, shortcut the "configure GDB for fewer languages" stuff.
294 YYFILES
= c-exp.tab.c m2-exp.tab.c
295 YYOBJ
= c-exp.tab.o m2-exp.tab.o
297 # Prevent Sun make from putting in the machine type. Setting
298 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
300 ${CC} -c
${CFLAGS} $<
303 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)"
305 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)"
307 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)"
309 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)"
312 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
313 pack gdb.t
; rm -f gdb.t
317 $(INSTALL_PROGRAM
) gdb
$(bindir)/gdb
319 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)"
321 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
322 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
324 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
325 ${CC-LD
} $(LDFLAGS
) -o gdb init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) \
326 $(CLIBS
) $(LOADLIBES
)
328 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
329 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
330 #load ./init.c $(SFILES)
331 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
332 #unload ${srcdir}/nindy-share/[A-Z]*
333 #load c-exp.tab.c m2-exp.tab.c
334 #load copying.c version.c
335 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
336 #load ${LIBIBERTY_DIR}/*.c
338 #load ${READLINE_DIR}/*.c
340 ##void mcheck(a) void (*a)(); { }
345 # This is useful when debugging GDB, because some Unix's don't let you run GDB
346 # on itself without copying the executable. So "make gdb1" will make
347 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
348 # Removing gdb1 before the copy is the right thing if gdb1 is open
349 # in another process.
354 # This is a remote stub which runs under unix and starts up an
355 # inferior process. This is at least useful for debugging GDB's
359 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
360 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
362 # Support for building Makefile out of configured pieces, automatically
363 # generated dependencies, etc. alldeps.mak is a file that contains
364 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
365 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
366 # contents of the config subdirectory.
368 alldeps.mak
: ${srcdir}/config
369 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
370 for i in
`ls -d ${srcdir}/config/m[ht]-*` ; do \
371 echo
$$i >>allconfig.tmp
; \
373 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
374 for (i = 2; i <= NF; i++) \
375 print $$i >> "alldeps.tmp" ; \
377 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
378 print $$2 >> "allparam.tmp" }' ; \
380 sort <alldeps.tmp | uniq | \
381 sed
-e
's/arm-convert.o/arm-convert.s/' \
382 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
383 -e
's!^nindy.o!nindy-share/nindy.c!' \
384 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
385 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
386 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
387 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
388 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
389 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
392 echo
'# Start of "alldeps.mak" definitions' \
394 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
396 grep
-v
/ alldeps2.tmp | \
397 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
398 NR == 0 {printf $$0;} \
399 NR != 0 {printf "\\\n" $$0} \
400 END {printf "\n\n"}' >>alldeps.mak
;
401 grep
/ alldeps2.tmp | \
402 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
403 NR == 0 {printf $$0;} \
404 NR != 0 {printf "\\\n" $$0} \
405 END {printf "\n\n"}' >>alldeps.mak
;
406 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
407 NR == 0 {printf $$0;} \
408 NR != 0 {printf "\\\n" $$0} \
409 END {printf "\n\n"}' >>alldeps.mak
;
410 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
411 NR == 0 {printf $$0;} \
412 NR != 0 {printf "\\\n" $$0} \
413 END {printf "\n\n"}' >>alldeps.mak
;
414 echo
'# End of "alldeps.mak" definitions' \
416 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
418 # The sed script makes everything which depends on {x,t}m.h depend on
419 # config.status as well, in case someone reconfigures gdb out from
420 # under an already compiled gdb.
421 depend
: $(SOURCES
) Makefile.in
422 @echo Ignore errors about non-existent system-supplied
include files
423 @echo for systems other than the one you are using.
424 @echo
"If xm.h and tm.h don't exist, the error messages saying so"
425 @echo can safely be ignored.
426 @echo Also ignore parse errors in valops.c
, and any errors in
428 -$(GCC
) -MM
$(CFLAGS
) -I
$(BFD_DIR
) \
429 `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
430 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
431 # for xm.h and tm.h. This allows the same "depend" file to be used
432 # by the various subdirectories.
433 if
[ "${srcdir}" = "." ] ; then \
435 -e
's; ./xm.h; xm.h;g' \
436 -e
's; ./tm.h; tm.h;g' \
437 -e
's; \./; $${srcdir}/;g' \
438 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
439 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
442 mv depend.tm2 depend.tmp
; \
445 -e
's; [xt]m.h;& config.status;g' \
446 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
447 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
448 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
449 -e
's; ./xm.h; xm.h config.status;g' \
450 -e
's; ./tm.h; tm.h config.status;g' \
455 @echo
"You must configure gdb. Look at the README file for details."
458 # These are not generated by "make depend" because they only are there
460 # But these rules don't do what we want; we want to hack the foo.o: tm.h
461 # dependency to do the right thing.
462 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
463 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
464 xm-news1000.h
: xm-news.h
465 xm-i386-sv32.h
: xm-i386.h
466 tm-i386gas.h
: tm-i386.h
467 xm-sun4os4.h
: xm-sparc.h
468 tm-sun4os4.h
: tm-sparc.h
470 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
472 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
473 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
474 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
477 # Put the proper machine-specific files first.
478 # createtags will edit the .o in DEPFILES into .c
480 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
483 # Making distributions of GDB and friends.
485 # Make a directory `proto-gdb.dir' that contains an image of the GDB
486 # directory of the distribution, built up with symlinks.
487 make-proto-gdb.
dir: force_update
488 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
489 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
491 # Make a tar file containing the GDB directory of the distribution.
492 gdb.
tar.Z
: force_update
493 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
494 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
496 # Set up the GDB directory for distribution, by building all files that
497 # are products of other files.
498 setup-to-dist
: force_update
501 $(MAKE
) $(MFLAGS
) alldeps.mak
504 $(MAKE
) $(MFLAGS
) depend
506 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
507 $(MAKE
) $(MFLAGS
) gdb.
info
508 $(MAKE
) $(MFLAGS
) refcard.ps
510 # Build a tar file from a proto-gdb.dir.
511 gdb-
$(VERSION
).
tar.Z
: force_update
512 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
513 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
514 ln
-s proto-gdb.
dir $(DIST
)
515 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
516 rm -rf
$(DIST
) proto-gdb.
dir
518 # Build a proto-gdb.dir after GDB has been set up for distribution.
519 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
520 # built in the setup-to-dist process, since it defines things like ALLCONFIG
521 # and ALLDEPFILES, that we need.
522 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
525 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
526 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
527 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
528 (mkdir
$$i; cd
$$i; \
529 ln
-s ..
/..
/$$i/* .
; \
530 rm -rf SCCS CVS.adm RCS config.status
); done
531 mkdir proto-gdb.
dir/config
532 cd proto-gdb.
dir/config
; \
533 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
534 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
535 cd proto-gdb.
dir/config
; \
536 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
537 do ln
-s ..
/..
/$$i ..
/$$i ; done
538 chmod og
=u
`find . -print`
541 rm -f
${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
542 rm -f init.c init.o version.c
543 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
545 $(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)"
547 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
548 rm -f tm.h xm.h config.status
549 rm -f y.output
yacc.acts
yacc.tmp
550 rm -f
${TESTS} Makefile depend
551 $(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)"
554 rm -f c-exp.tab.c m2-exp.tab.c TAGS
555 rm -f tm.h xm.h config.status
556 rm -f Makefile depend
557 $(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)"
559 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
562 for i in
$(DODIRS
); do \
563 if
[ -d
$(unsubdir
)/$$i ] ; then \
564 if
(cd
$(unsubdir
)/$$i$(subdir
); \
566 "against=$(against)" \
568 "AR_FLAGS=$(AR_FLAGS)" \
571 "BISON=$(BISON)" $(DO
)) ; then true
; \
576 # Copy the object files from a particular stage into a subdirectory.
579 -mv
-f
$(STAGESTUFF
) stage1
580 $(MAKE
) subdir_do DO
=stage1
"DODIRS=$(SUBDIRS)"
584 -mv
-f
$(STAGESTUFF
) stage2
585 $(MAKE
) subdir_do DO
=stage2
"DODIRS=$(SUBDIRS)"
589 -mv
-f
$(STAGESTUFF
) stage3
590 $(MAKE
) subdir_do DO
=stage3
"DODIRS=$(SUBDIRS)"
595 for i in
$(STAGESTUFF
) ; do cmp
$$i $(against
)/$$i ; done
596 $(MAKE
) subdir_do DO
=comparison
"DODIRS=$(SUBDIRS)"
599 -(cd stage1
; mv
-f
* ..
)
601 $(MAKE
) subdir_do DO
=de-stage1
"DODIRS=$(SUBDIRS)"
604 -(cd stage2
; mv
-f
* ..
)
606 $(MAKE
) subdir_do DO
=de-stage2
"DODIRS=$(SUBDIRS)"
609 -(cd stage3
; mv
-f
* ..
)
611 $(MAKE
) subdir_do DO
=de-stage3
"DODIRS=$(SUBDIRS)"
613 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
614 $(SHELL
) .
/config.status
619 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
620 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
621 ( cd
$(unsubdir
)/doc
; $(MAKE
) refcard.
dvi )
622 mv
$(unsubdir
)/doc
/refcard.
dvi .
624 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
625 refcard.ps
: $(srcdir)/doc
/refcard.
tex
626 ( cd
$(unsubdir
)/doc
; $(MAKE
) refcard.ps
)
627 mv
$(unsubdir
)/doc
/refcard.ps .
629 # GDB MANUAL: TeX dvi file
630 gdb.
dvi: $(unsubdir
)/doc
/gdb-all.texi
631 ( cd
$(unsubdir
)/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi )
632 mv
$(unsubdir
)/doc
/gdb.
dvi .
634 # GDB MANUAL: info file
635 gdb.
info: $(unsubdir
)/doc
/gdb-all.texi
636 ( cd
$(unsubdir
)/doc
; $(MAKE
) M4
=$(M4
) gdb.
info )
637 mv
$(unsubdir
)/doc
/gdb.
info* .
639 $(unsubdir
)/doc
/gdb-all.texi
:
640 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
)
642 # Make copying.c from COPYING
643 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
644 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
646 version.c
: Makefile.in
647 echo
'char *version = "$(VERSION)";' >version.c
649 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
650 # in srcdir, then compiled in target dir to c-exp.tab.o.
651 c-exp.tab.o
: c-exp.tab.c
652 c-exp.tab.c
: $(srcdir)/c-exp.y
653 @echo
'Expect 4 shift/reduce conflicts.'
654 ${YACC} $(srcdir)/c-exp.y
655 -mv y.tab.c c-exp.tab.c
657 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
658 # in srcdir, then compiled in target dir to m2-exp.tab.o.
659 m2-exp.tab.o
: m2-exp.tab.c
660 m2-exp.tab.c
: $(srcdir)/m2-exp.y
661 ${YACC} $(srcdir)/m2-exp.y
662 -mv y.tab.c m2-exp.tab.c
664 # The symbol-file readers have dependencies on BFD header files.
665 dbxread.o
: ${srcdir}/dbxread.c
666 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
668 coffread.o
: ${srcdir}/coffread.c
669 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
671 mipsread.o
: ${srcdir}/mipsread.c
672 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
674 elfread.o
: ${srcdir}/elfread.c
675 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
677 xcoffread.o
: ${srcdir}/xcoffread.c
678 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
680 xcoffexec.o
: ${srcdir}/xcoffexec.c
681 ${CC} -c
${CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
683 # Drag in the files that are in another directory.
685 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
686 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
688 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
689 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
691 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
692 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
694 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
695 ${CC} -c
${CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
697 nindy.o
: ${srcdir}/nindy-share
/nindy.c
698 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/nindy.c
700 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
701 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/Onindy.c
703 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
704 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
706 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
707 ${CC} -c
${CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
710 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
711 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
714 cxref -I. $(SFILES) >gdb.cxref
718 # When used with GDB, the demangler should never look for leading
719 # underscores because GDB strips them off during symbol read-in. Thus
722 cplus-dem.o: cplus-dem.c
723 ${CC} -c ${CFLAGS} -Dnounderscore \
724 `echo
${srcdir}/cplus-dem.c | sed
's,^\./,,'`
726 # GNU Make has an annoying habit of putting *all* the Makefile variables
727 # into the environment, unless you include this target as a circumvention.
728 # Rumor is that this will be fixed (and this target can be removed)
732 # This is the end of "Makefile.in". When built into "Makefile"
733 # by the configure script, two things are added below this point:
734 # alldeps.mak -- defintions of all files that are used in
735 # host- or target-dependent configurations
736 # depend -- what .o files depend on what .c and .h files,
737 # for all configurations.