1 /* Target-dependent code for Atmel AVR, for GDB.
3 Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
4 2006, 2007 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor,
21 Boston, MA 02110-1301, USA. */
23 /* Contributed by Theodore A. Roth, troth@openavr.org */
25 /* Portions of this file were taken from the original gdb-4.18 patch developed
26 by Denis Chertykov, denisc@overta.ru */
30 #include "frame-unwind.h"
31 #include "frame-base.h"
32 #include "trad-frame.h"
38 #include "arch-utils.h"
40 #include "gdb_string.h"
45 (AVR micros are pure Harvard Architecture processors.)
47 The AVR family of microcontrollers have three distinctly different memory
48 spaces: flash, sram and eeprom. The flash is 16 bits wide and is used for
49 the most part to store program instructions. The sram is 8 bits wide and is
50 used for the stack and the heap. Some devices lack sram and some can have
51 an additional external sram added on as a peripheral.
53 The eeprom is 8 bits wide and is used to store data when the device is
54 powered down. Eeprom is not directly accessible, it can only be accessed
55 via io-registers using a special algorithm. Accessing eeprom via gdb's
56 remote serial protocol ('m' or 'M' packets) looks difficult to do and is
57 not included at this time.
59 [The eeprom could be read manually via ``x/b <eaddr + AVR_EMEM_START>'' or
60 written using ``set {unsigned char}<eaddr + AVR_EMEM_START>''. For this to
61 work, the remote target must be able to handle eeprom accesses and perform
62 the address translation.]
64 All three memory spaces have physical addresses beginning at 0x0. In
65 addition, the flash is addressed by gcc/binutils/gdb with respect to 8 bit
66 bytes instead of the 16 bit wide words used by the real device for the
69 In order for remote targets to work correctly, extra bits must be added to
70 addresses before they are send to the target or received from the target
71 via the remote serial protocol. The extra bits are the MSBs and are used to
72 decode which memory space the address is referring to. */
75 #define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
78 #define EXTRACT_INSN(addr) extract_unsigned_integer(addr,2)
80 /* Constants: prefixed with AVR_ to avoid name space clashes */
94 AVR_NUM_REGS
= 32 + 1 /*SREG*/ + 1 /*SP*/ + 1 /*PC*/,
95 AVR_NUM_REG_BYTES
= 32 + 1 /*SREG*/ + 2 /*SP*/ + 4 /*PC*/,
97 AVR_PC_REG_INDEX
= 35, /* index into array of registers */
99 AVR_MAX_PROLOGUE_SIZE
= 64, /* bytes */
101 /* Count of pushed registers. From r2 to r17 (inclusively), r28, r29 */
104 /* Number of the last pushed register. r17 for current avr-gcc */
105 AVR_LAST_PUSHED_REGNUM
= 17,
107 AVR_ARG1_REGNUM
= 24, /* Single byte argument */
108 AVR_ARGN_REGNUM
= 25, /* Multi byte argments */
110 AVR_RET1_REGNUM
= 24, /* Single byte return value */
111 AVR_RETN_REGNUM
= 25, /* Multi byte return value */
113 /* FIXME: TRoth/2002-01-??: Can we shift all these memory masks left 8
114 bits? Do these have to match the bfd vma values?. It sure would make
115 things easier in the future if they didn't need to match.
117 Note: I chose these values so as to be consistent with bfd vma
120 TRoth/2002-04-08: There is already a conflict with very large programs
121 in the mega128. The mega128 has 128K instruction bytes (64K words),
122 thus the Most Significant Bit is 0x10000 which gets masked off my
125 The problem manifests itself when trying to set a breakpoint in a
126 function which resides in the upper half of the instruction space and
127 thus requires a 17-bit address.
129 For now, I've just removed the EEPROM mask and changed AVR_MEM_MASK
130 from 0x00ff0000 to 0x00f00000. Eeprom is not accessible from gdb yet,
131 but could be for some remote targets by just adding the correct offset
132 to the address and letting the remote target handle the low-level
133 details of actually accessing the eeprom. */
135 AVR_IMEM_START
= 0x00000000, /* INSN memory */
136 AVR_SMEM_START
= 0x00800000, /* SRAM memory */
138 /* No eeprom mask defined */
139 AVR_MEM_MASK
= 0x00f00000, /* mask to determine memory space */
141 AVR_EMEM_START
= 0x00810000, /* EEPROM memory */
142 AVR_MEM_MASK
= 0x00ff0000, /* mask to determine memory space */
148 NORMAL and CALL are the typical types (the -mcall-prologues gcc option
149 causes the generation of the CALL type prologues). */
152 AVR_PROLOGUE_NONE
, /* No prologue */
154 AVR_PROLOGUE_CALL
, /* -mcall-prologues */
156 AVR_PROLOGUE_INTR
, /* interrupt handler */
157 AVR_PROLOGUE_SIG
, /* signal handler */
160 /* Any function with a frame looks like this
161 ....... <-SP POINTS HERE
162 LOCALS1 <-FP POINTS HERE
171 struct avr_unwind_cache
173 /* The previous frame's inner most stack address. Used as this
174 frame ID's stack_addr. */
176 /* The frame's base, optionally used by the high-level debug info. */
180 /* Table indicating the location of each and every register. */
181 struct trad_frame_saved_reg
*saved_regs
;
186 /* FIXME: TRoth: is there anything to put here? */
190 /* Lookup the name of a register given it's number. */
193 avr_register_name (int regnum
)
195 static char *register_names
[] = {
196 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
197 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
198 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
199 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
204 if (regnum
>= (sizeof (register_names
) / sizeof (*register_names
)))
206 return register_names
[regnum
];
209 /* Return the GDB type object for the "standard" data type
210 of data in register N. */
213 avr_register_type (struct gdbarch
*gdbarch
, int reg_nr
)
215 if (reg_nr
== AVR_PC_REGNUM
)
216 return builtin_type_uint32
;
217 if (reg_nr
== AVR_SP_REGNUM
)
218 return builtin_type_void_data_ptr
;
220 return builtin_type_uint8
;
223 /* Instruction address checks and convertions. */
226 avr_make_iaddr (CORE_ADDR x
)
228 return ((x
) | AVR_IMEM_START
);
231 /* FIXME: TRoth: Really need to use a larger mask for instructions. Some
232 devices are already up to 128KBytes of flash space.
234 TRoth/2002-04-8: See comment above where AVR_IMEM_START is defined. */
237 avr_convert_iaddr_to_raw (CORE_ADDR x
)
239 return ((x
) & 0xffffffff);
242 /* SRAM address checks and convertions. */
245 avr_make_saddr (CORE_ADDR x
)
247 return ((x
) | AVR_SMEM_START
);
251 avr_convert_saddr_to_raw (CORE_ADDR x
)
253 return ((x
) & 0xffffffff);
256 /* EEPROM address checks and convertions. I don't know if these will ever
257 actually be used, but I've added them just the same. TRoth */
259 /* TRoth/2002-04-08: Commented out for now to allow fix for problem with large
260 programs in the mega128. */
262 /* static CORE_ADDR */
263 /* avr_make_eaddr (CORE_ADDR x) */
265 /* return ((x) | AVR_EMEM_START); */
269 /* avr_eaddr_p (CORE_ADDR x) */
271 /* return (((x) & AVR_MEM_MASK) == AVR_EMEM_START); */
274 /* static CORE_ADDR */
275 /* avr_convert_eaddr_to_raw (CORE_ADDR x) */
277 /* return ((x) & 0xffffffff); */
280 /* Convert from address to pointer and vice-versa. */
283 avr_address_to_pointer (struct type
*type
, gdb_byte
*buf
, CORE_ADDR addr
)
285 /* Is it a code address? */
286 if (TYPE_CODE (TYPE_TARGET_TYPE (type
)) == TYPE_CODE_FUNC
287 || TYPE_CODE (TYPE_TARGET_TYPE (type
)) == TYPE_CODE_METHOD
)
289 store_unsigned_integer (buf
, TYPE_LENGTH (type
),
290 avr_convert_iaddr_to_raw (addr
>> 1));
294 /* Strip off any upper segment bits. */
295 store_unsigned_integer (buf
, TYPE_LENGTH (type
),
296 avr_convert_saddr_to_raw (addr
));
301 avr_pointer_to_address (struct type
*type
, const gdb_byte
*buf
)
303 CORE_ADDR addr
= extract_unsigned_integer (buf
, TYPE_LENGTH (type
));
305 /* Is it a code address? */
306 if (TYPE_CODE (TYPE_TARGET_TYPE (type
)) == TYPE_CODE_FUNC
307 || TYPE_CODE (TYPE_TARGET_TYPE (type
)) == TYPE_CODE_METHOD
308 || TYPE_CODE_SPACE (TYPE_TARGET_TYPE (type
)))
309 return avr_make_iaddr (addr
<< 1);
311 return avr_make_saddr (addr
);
315 avr_read_pc (ptid_t ptid
)
321 save_ptid
= inferior_ptid
;
322 inferior_ptid
= ptid
;
323 regcache_cooked_read_unsigned (current_regcache
, AVR_PC_REGNUM
, &pc
);
324 inferior_ptid
= save_ptid
;
325 retval
= avr_make_iaddr (pc
);
330 avr_write_pc (CORE_ADDR val
, ptid_t ptid
)
334 save_ptid
= inferior_ptid
;
335 inferior_ptid
= ptid
;
336 write_register (AVR_PC_REGNUM
, avr_convert_iaddr_to_raw (val
));
337 inferior_ptid
= save_ptid
;
345 regcache_cooked_read_unsigned (current_regcache
, AVR_SP_REGNUM
, &sp
);
346 return (avr_make_saddr (sp
));
350 avr_scan_arg_moves (int vpc
, unsigned char *prologue
)
354 for (; vpc
< AVR_MAX_PROLOGUE_SIZE
; vpc
+= 2)
356 insn
= EXTRACT_INSN (&prologue
[vpc
]);
357 if ((insn
& 0xff00) == 0x0100) /* movw rXX, rYY */
359 else if ((insn
& 0xfc00) == 0x2c00) /* mov rXX, rYY */
368 /* Function: avr_scan_prologue
370 This function decodes an AVR function prologue to determine:
371 1) the size of the stack frame
372 2) which registers are saved on it
373 3) the offsets of saved regs
374 This information is stored in the avr_unwind_cache structure.
376 Some devices lack the sbiw instruction, so on those replace this:
382 A typical AVR function prologue with a frame pointer might look like this:
383 push rXX ; saved regs
389 sbiw r28,<LOCALS_SIZE>
390 in __tmp_reg__,__SREG__
393 out __SREG__,__tmp_reg__
396 A typical AVR function prologue without a frame pointer might look like
398 push rXX ; saved regs
401 A main function prologue looks like this:
402 ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>)
403 ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>)
407 A signal handler prologue looks like this:
410 in __tmp_reg__, __SREG__
413 push rXX ; save registers r18:r27, r30:r31
415 push r28 ; save frame pointer
419 sbiw r28, <LOCALS_SIZE>
423 A interrupt handler prologue looks like this:
427 in __tmp_reg__, __SREG__
430 push rXX ; save registers r18:r27, r30:r31
432 push r28 ; save frame pointer
436 sbiw r28, <LOCALS_SIZE>
442 A `-mcall-prologues' prologue looks like this (Note that the megas use a
443 jmp instead of a rjmp, thus the prologue is one word larger since jmp is a
444 32 bit insn and rjmp is a 16 bit insn):
445 ldi r26,lo8(<LOCALS_SIZE>)
446 ldi r27,hi8(<LOCALS_SIZE>)
447 ldi r30,pm_lo8(.L_foo_body)
448 ldi r31,pm_hi8(.L_foo_body)
449 rjmp __prologue_saves__+RRR
452 /* Not really part of a prologue, but still need to scan for it, is when a
453 function prologue moves values passed via registers as arguments to new
454 registers. In this case, all local variables live in registers, so there
455 may be some register saves. This is what it looks like:
459 There could be multiple movw's. If the target doesn't have a movw insn, it
460 will use two mov insns. This could be done after any of the above prologue
464 avr_scan_prologue (CORE_ADDR pc
, struct avr_unwind_cache
*info
)
469 struct minimal_symbol
*msymbol
;
470 unsigned char prologue
[AVR_MAX_PROLOGUE_SIZE
];
473 /* FIXME: TRoth/2003-06-11: This could be made more efficient by only
474 reading in the bytes of the prologue. The problem is that the figuring
475 out where the end of the prologue is is a bit difficult. The old code
476 tried to do that, but failed quite often. */
477 read_memory (pc
, prologue
, AVR_MAX_PROLOGUE_SIZE
);
479 /* Scanning main()'s prologue
480 ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>)
481 ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>)
488 unsigned char img
[] = {
489 0xde, 0xbf, /* out __SP_H__,r29 */
490 0xcd, 0xbf /* out __SP_L__,r28 */
493 insn
= EXTRACT_INSN (&prologue
[vpc
]);
494 /* ldi r28,lo8(<RAM_ADDR> - <LOCALS_SIZE>) */
495 if ((insn
& 0xf0f0) == 0xe0c0)
497 locals
= (insn
& 0xf) | ((insn
& 0x0f00) >> 4);
498 insn
= EXTRACT_INSN (&prologue
[vpc
+ 2]);
499 /* ldi r29,hi8(<RAM_ADDR> - <LOCALS_SIZE>) */
500 if ((insn
& 0xf0f0) == 0xe0d0)
502 locals
|= ((insn
& 0xf) | ((insn
& 0x0f00) >> 4)) << 8;
503 if (memcmp (prologue
+ vpc
+ 4, img
, sizeof (img
)) == 0)
505 info
->prologue_type
= AVR_PROLOGUE_MAIN
;
513 /* Scanning `-mcall-prologues' prologue
514 Classic prologue is 10 bytes, mega prologue is a 12 bytes long */
516 while (1) /* Using a while to avoid many goto's */
523 insn
= EXTRACT_INSN (&prologue
[vpc
]);
524 /* ldi r26,<LOCALS_SIZE> */
525 if ((insn
& 0xf0f0) != 0xe0a0)
527 loc_size
= (insn
& 0xf) | ((insn
& 0x0f00) >> 4);
530 insn
= EXTRACT_INSN (&prologue
[vpc
+ 2]);
531 /* ldi r27,<LOCALS_SIZE> / 256 */
532 if ((insn
& 0xf0f0) != 0xe0b0)
534 loc_size
|= ((insn
& 0xf) | ((insn
& 0x0f00) >> 4)) << 8;
537 insn
= EXTRACT_INSN (&prologue
[vpc
+ 4]);
538 /* ldi r30,pm_lo8(.L_foo_body) */
539 if ((insn
& 0xf0f0) != 0xe0e0)
541 body_addr
= (insn
& 0xf) | ((insn
& 0x0f00) >> 4);
544 insn
= EXTRACT_INSN (&prologue
[vpc
+ 6]);
545 /* ldi r31,pm_hi8(.L_foo_body) */
546 if ((insn
& 0xf0f0) != 0xe0f0)
548 body_addr
|= ((insn
& 0xf) | ((insn
& 0x0f00) >> 4)) << 8;
551 msymbol
= lookup_minimal_symbol ("__prologue_saves__", NULL
, NULL
);
555 insn
= EXTRACT_INSN (&prologue
[vpc
+ 8]);
556 /* rjmp __prologue_saves__+RRR */
557 if ((insn
& 0xf000) == 0xc000)
559 /* Extract PC relative offset from RJMP */
560 i
= (insn
& 0xfff) | (insn
& 0x800 ? (-1 ^ 0xfff) : 0);
561 /* Convert offset to byte addressable mode */
563 /* Destination address */
566 if (body_addr
!= (pc
+ 10)/2)
571 else if ((insn
& 0xfe0e) == 0x940c)
573 /* Extract absolute PC address from JMP */
574 i
= (((insn
& 0x1) | ((insn
& 0x1f0) >> 3) << 16)
575 | (EXTRACT_INSN (&prologue
[vpc
+ 10]) & 0xffff));
576 /* Convert address to byte addressable mode */
579 if (body_addr
!= (pc
+ 12)/2)
587 /* Resolve offset (in words) from __prologue_saves__ symbol.
588 Which is a pushes count in `-mcall-prologues' mode */
589 num_pushes
= AVR_MAX_PUSHES
- (i
- SYMBOL_VALUE_ADDRESS (msymbol
)) / 2;
591 if (num_pushes
> AVR_MAX_PUSHES
)
593 fprintf_unfiltered (gdb_stderr
, _("Num pushes too large: %d\n"),
602 info
->saved_regs
[AVR_FP_REGNUM
+ 1].addr
= num_pushes
;
604 info
->saved_regs
[AVR_FP_REGNUM
].addr
= num_pushes
- 1;
607 for (from
= AVR_LAST_PUSHED_REGNUM
+ 1 - (num_pushes
- 2);
608 from
<= AVR_LAST_PUSHED_REGNUM
; ++from
)
609 info
->saved_regs
[from
].addr
= ++i
;
611 info
->size
= loc_size
+ num_pushes
;
612 info
->prologue_type
= AVR_PROLOGUE_CALL
;
614 return pc
+ pc_offset
;
617 /* Scan for the beginning of the prologue for an interrupt or signal
618 function. Note that we have to set the prologue type here since the
619 third stage of the prologue may not be present (e.g. no saved registered
620 or changing of the SP register). */
624 unsigned char img
[] = {
625 0x78, 0x94, /* sei */
626 0x1f, 0x92, /* push r1 */
627 0x0f, 0x92, /* push r0 */
628 0x0f, 0xb6, /* in r0,0x3f SREG */
629 0x0f, 0x92, /* push r0 */
630 0x11, 0x24 /* clr r1 */
632 if (memcmp (prologue
, img
, sizeof (img
)) == 0)
634 info
->prologue_type
= AVR_PROLOGUE_INTR
;
636 info
->saved_regs
[AVR_SREG_REGNUM
].addr
= 3;
637 info
->saved_regs
[0].addr
= 2;
638 info
->saved_regs
[1].addr
= 1;
641 else if (memcmp (img
+ 2, prologue
, sizeof (img
) - 2) == 0)
643 info
->prologue_type
= AVR_PROLOGUE_SIG
;
644 vpc
+= sizeof (img
) - 2;
645 info
->saved_regs
[AVR_SREG_REGNUM
].addr
= 3;
646 info
->saved_regs
[0].addr
= 2;
647 info
->saved_regs
[1].addr
= 1;
652 /* First stage of the prologue scanning.
653 Scan pushes (saved registers) */
655 for (; vpc
< AVR_MAX_PROLOGUE_SIZE
; vpc
+= 2)
657 insn
= EXTRACT_INSN (&prologue
[vpc
]);
658 if ((insn
& 0xfe0f) == 0x920f) /* push rXX */
660 /* Bits 4-9 contain a mask for registers R0-R32. */
661 int regno
= (insn
& 0x1f0) >> 4;
663 info
->saved_regs
[regno
].addr
= info
->size
;
670 if (vpc
>= AVR_MAX_PROLOGUE_SIZE
)
671 fprintf_unfiltered (gdb_stderr
,
672 _("Hit end of prologue while scanning pushes\n"));
674 /* Second stage of the prologue scanning.
679 if (scan_stage
== 1 && vpc
< AVR_MAX_PROLOGUE_SIZE
)
681 unsigned char img
[] = {
682 0xcd, 0xb7, /* in r28,__SP_L__ */
683 0xde, 0xb7 /* in r29,__SP_H__ */
685 unsigned short insn1
;
687 if (memcmp (prologue
+ vpc
, img
, sizeof (img
)) == 0)
694 /* Third stage of the prologue scanning. (Really two stages)
696 sbiw r28,XX or subi r28,lo8(XX)
698 in __tmp_reg__,__SREG__
701 out __SREG__,__tmp_reg__
704 if (scan_stage
== 2 && vpc
< AVR_MAX_PROLOGUE_SIZE
)
707 unsigned char img
[] = {
708 0x0f, 0xb6, /* in r0,0x3f */
709 0xf8, 0x94, /* cli */
710 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
711 0x0f, 0xbe, /* out 0x3f,r0 ; SREG */
712 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
714 unsigned char img_sig
[] = {
715 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
716 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
718 unsigned char img_int
[] = {
719 0xf8, 0x94, /* cli */
720 0xde, 0xbf, /* out 0x3e,r29 ; SPH */
721 0x78, 0x94, /* sei */
722 0xcd, 0xbf /* out 0x3d,r28 ; SPL */
725 insn
= EXTRACT_INSN (&prologue
[vpc
]);
727 if ((insn
& 0xff30) == 0x9720) /* sbiw r28,XXX */
728 locals_size
= (insn
& 0xf) | ((insn
& 0xc0) >> 2);
729 else if ((insn
& 0xf0f0) == 0x50c0) /* subi r28,lo8(XX) */
731 locals_size
= (insn
& 0xf) | ((insn
& 0xf00) >> 4);
732 insn
= EXTRACT_INSN (&prologue
[vpc
]);
734 locals_size
+= ((insn
& 0xf) | ((insn
& 0xf00) >> 4) << 8);
739 /* Scan the last part of the prologue. May not be present for interrupt
740 or signal handler functions, which is why we set the prologue type
741 when we saw the beginning of the prologue previously. */
743 if (memcmp (prologue
+ vpc
, img_sig
, sizeof (img_sig
)) == 0)
745 vpc
+= sizeof (img_sig
);
747 else if (memcmp (prologue
+ vpc
, img_int
, sizeof (img_int
)) == 0)
749 vpc
+= sizeof (img_int
);
751 if (memcmp (prologue
+ vpc
, img
, sizeof (img
)) == 0)
753 info
->prologue_type
= AVR_PROLOGUE_NORMAL
;
757 info
->size
+= locals_size
;
759 return pc
+ avr_scan_arg_moves (vpc
, prologue
);
762 /* If we got this far, we could not scan the prologue, so just return the pc
763 of the frame plus an adjustment for argument move insns. */
765 return pc
+ avr_scan_arg_moves (vpc
, prologue
);;
769 avr_skip_prologue (CORE_ADDR pc
)
771 CORE_ADDR func_addr
, func_end
;
772 CORE_ADDR prologue_end
= pc
;
774 /* See what the symbol table says */
776 if (find_pc_partial_function (pc
, NULL
, &func_addr
, &func_end
))
778 struct symtab_and_line sal
;
779 struct avr_unwind_cache info
= {0};
780 struct trad_frame_saved_reg saved_regs
[AVR_NUM_REGS
];
782 info
.saved_regs
= saved_regs
;
784 /* Need to run the prologue scanner to figure out if the function has a
785 prologue and possibly skip over moving arguments passed via registers
786 to other registers. */
788 prologue_end
= avr_scan_prologue (pc
, &info
);
790 if (info
.prologue_type
== AVR_PROLOGUE_NONE
)
794 sal
= find_pc_line (func_addr
, 0);
796 if (sal
.line
!= 0 && sal
.end
< func_end
)
801 /* Either we didn't find the start of this function (nothing we can do),
802 or there's no line info, or the line after the prologue is after
803 the end of the function (there probably isn't a prologue). */
808 /* Not all avr devices support the BREAK insn. Those that don't should treat
809 it as a NOP. Thus, it should be ok. Since the avr is currently a remote
810 only target, this shouldn't be a problem (I hope). TRoth/2003-05-14 */
812 static const unsigned char *
813 avr_breakpoint_from_pc (CORE_ADDR
* pcptr
, int *lenptr
)
815 static unsigned char avr_break_insn
[] = { 0x98, 0x95 };
816 *lenptr
= sizeof (avr_break_insn
);
817 return avr_break_insn
;
820 /* Given a return value in `regbuf' with a type `valtype',
821 extract and copy its value into `valbuf'.
823 Return values are always passed via registers r25:r24:... */
826 avr_extract_return_value (struct type
*type
, struct regcache
*regcache
,
832 if (TYPE_LENGTH (type
) == 1)
834 regcache_cooked_read_unsigned (regcache
, 24, &c
);
835 store_unsigned_integer (valbuf
, 1, c
);
840 /* The MSB of the return value is always in r25, calculate which
841 register holds the LSB. */
842 int lsb_reg
= 25 - TYPE_LENGTH (type
) + 1;
844 for (i
=0; i
< TYPE_LENGTH (type
); i
++)
846 regcache_cooked_read (regcache
, lsb_reg
+ i
,
847 (bfd_byte
*) valbuf
+ i
);
852 /* Put here the code to store, into fi->saved_regs, the addresses of
853 the saved registers of frame described by FRAME_INFO. This
854 includes special registers such as pc and fp saved in special ways
855 in the stack frame. sp is even more special: the address we return
856 for it IS the sp for the next frame. */
858 struct avr_unwind_cache
*
859 avr_frame_unwind_cache (struct frame_info
*next_frame
,
860 void **this_prologue_cache
)
865 struct avr_unwind_cache
*info
;
868 if ((*this_prologue_cache
))
869 return (*this_prologue_cache
);
871 info
= FRAME_OBSTACK_ZALLOC (struct avr_unwind_cache
);
872 (*this_prologue_cache
) = info
;
873 info
->saved_regs
= trad_frame_alloc_saved_regs (next_frame
);
876 info
->prologue_type
= AVR_PROLOGUE_NONE
;
878 pc
= frame_func_unwind (next_frame
);
880 if ((pc
> 0) && (pc
< frame_pc_unwind (next_frame
)))
881 avr_scan_prologue (pc
, info
);
883 if ((info
->prologue_type
!= AVR_PROLOGUE_NONE
)
884 && (info
->prologue_type
!= AVR_PROLOGUE_MAIN
))
886 ULONGEST high_base
; /* High byte of FP */
888 /* The SP was moved to the FP. This indicates that a new frame
889 was created. Get THIS frame's FP value by unwinding it from
891 frame_unwind_unsigned_register (next_frame
, AVR_FP_REGNUM
, &this_base
);
892 frame_unwind_unsigned_register (next_frame
, AVR_FP_REGNUM
+1, &high_base
);
893 this_base
+= (high_base
<< 8);
895 /* The FP points at the last saved register. Adjust the FP back
896 to before the first saved register giving the SP. */
897 prev_sp
= this_base
+ info
->size
;
901 /* Assume that the FP is this frame's SP but with that pushed
902 stack space added back. */
903 frame_unwind_unsigned_register (next_frame
, AVR_SP_REGNUM
, &this_base
);
904 prev_sp
= this_base
+ info
->size
;
907 /* Add 1 here to adjust for the post-decrement nature of the push
909 info
->prev_sp
= avr_make_saddr (prev_sp
+1);
911 info
->base
= avr_make_saddr (this_base
);
913 /* Adjust all the saved registers so that they contain addresses and not
915 for (i
= 0; i
< NUM_REGS
- 1; i
++)
916 if (info
->saved_regs
[i
].addr
)
918 info
->saved_regs
[i
].addr
= (info
->prev_sp
- info
->saved_regs
[i
].addr
);
921 /* Except for the main and startup code, the return PC is always saved on
922 the stack and is at the base of the frame. */
924 if (info
->prologue_type
!= AVR_PROLOGUE_MAIN
)
926 info
->saved_regs
[AVR_PC_REGNUM
].addr
= info
->prev_sp
;
929 /* The previous frame's SP needed to be computed. Save the computed
931 trad_frame_set_value (info
->saved_regs
, AVR_SP_REGNUM
, info
->prev_sp
+1);
937 avr_unwind_pc (struct gdbarch
*gdbarch
, struct frame_info
*next_frame
)
941 frame_unwind_unsigned_register (next_frame
, AVR_PC_REGNUM
, &pc
);
943 return avr_make_iaddr (pc
);
946 /* Given a GDB frame, determine the address of the calling function's
947 frame. This will be used to create a new GDB frame struct. */
950 avr_frame_this_id (struct frame_info
*next_frame
,
951 void **this_prologue_cache
,
952 struct frame_id
*this_id
)
954 struct avr_unwind_cache
*info
955 = avr_frame_unwind_cache (next_frame
, this_prologue_cache
);
960 /* The FUNC is easy. */
961 func
= frame_func_unwind (next_frame
);
963 /* Hopefully the prologue analysis either correctly determined the
964 frame's base (which is the SP from the previous frame), or set
965 that base to "NULL". */
966 base
= info
->prev_sp
;
970 id
= frame_id_build (base
, func
);
975 avr_frame_prev_register (struct frame_info
*next_frame
,
976 void **this_prologue_cache
,
977 int regnum
, int *optimizedp
,
978 enum lval_type
*lvalp
, CORE_ADDR
*addrp
,
979 int *realnump
, gdb_byte
*bufferp
)
981 struct avr_unwind_cache
*info
982 = avr_frame_unwind_cache (next_frame
, this_prologue_cache
);
984 if (regnum
== AVR_PC_REGNUM
)
986 if (trad_frame_addr_p (info
->saved_regs
, regnum
))
989 *lvalp
= lval_memory
;
990 *addrp
= info
->saved_regs
[regnum
].addr
;
994 /* Reading the return PC from the PC register is slightly
995 abnormal. register_size(AVR_PC_REGNUM) says it is 4 bytes,
996 but in reality, only two bytes (3 in upcoming mega256) are
999 Also, note that the value on the stack is an addr to a word
1000 not a byte, so we will need to multiply it by two at some
1003 And to confuse matters even more, the return address stored
1004 on the stack is in big endian byte order, even though most
1005 everything else about the avr is little endian. Ick! */
1007 /* FIXME: number of bytes read here will need updated for the
1008 mega256 when it is available. */
1012 unsigned char buf
[2];
1014 read_memory (info
->saved_regs
[regnum
].addr
, buf
, 2);
1016 /* Convert the PC read from memory as a big-endian to
1017 little-endian order. */
1022 pc
= (extract_unsigned_integer (buf
, 2) * 2);
1023 store_unsigned_integer (bufferp
,
1024 register_size (current_gdbarch
, regnum
),
1030 trad_frame_get_prev_register (next_frame
, info
->saved_regs
, regnum
,
1031 optimizedp
, lvalp
, addrp
, realnump
, bufferp
);
1034 static const struct frame_unwind avr_frame_unwind
= {
1037 avr_frame_prev_register
1040 const struct frame_unwind
*
1041 avr_frame_sniffer (struct frame_info
*next_frame
)
1043 return &avr_frame_unwind
;
1047 avr_frame_base_address (struct frame_info
*next_frame
, void **this_cache
)
1049 struct avr_unwind_cache
*info
1050 = avr_frame_unwind_cache (next_frame
, this_cache
);
1055 static const struct frame_base avr_frame_base
= {
1057 avr_frame_base_address
,
1058 avr_frame_base_address
,
1059 avr_frame_base_address
1062 /* Assuming NEXT_FRAME->prev is a dummy, return the frame ID of that
1063 dummy frame. The frame ID's base needs to match the TOS value
1064 saved by save_dummy_frame_tos(), and the PC match the dummy frame's
1067 static struct frame_id
1068 avr_unwind_dummy_id (struct gdbarch
*gdbarch
, struct frame_info
*next_frame
)
1072 frame_unwind_unsigned_register (next_frame
, AVR_SP_REGNUM
, &base
);
1073 return frame_id_build (avr_make_saddr (base
), frame_pc_unwind (next_frame
));
1076 /* When arguments must be pushed onto the stack, they go on in reverse
1077 order. The below implements a FILO (stack) to do this. */
1082 struct stack_item
*prev
;
1086 static struct stack_item
*
1087 push_stack_item (struct stack_item
*prev
, const bfd_byte
*contents
, int len
)
1089 struct stack_item
*si
;
1090 si
= xmalloc (sizeof (struct stack_item
));
1091 si
->data
= xmalloc (len
);
1094 memcpy (si
->data
, contents
, len
);
1098 static struct stack_item
*pop_stack_item (struct stack_item
*si
);
1099 static struct stack_item
*
1100 pop_stack_item (struct stack_item
*si
)
1102 struct stack_item
*dead
= si
;
1109 /* Setup the function arguments for calling a function in the inferior.
1111 On the AVR architecture, there are 18 registers (R25 to R8) which are
1112 dedicated for passing function arguments. Up to the first 18 arguments
1113 (depending on size) may go into these registers. The rest go on the stack.
1115 All arguments are aligned to start in even-numbered registers (odd-sized
1116 arguments, including char, have one free register above them). For example,
1117 an int in arg1 and a char in arg2 would be passed as such:
1122 Arguments that are larger than 2 bytes will be split between two or more
1123 registers as available, but will NOT be split between a register and the
1124 stack. Arguments that go onto the stack are pushed last arg first (this is
1125 similar to the d10v). */
1127 /* NOTE: TRoth/2003-06-17: The rest of this comment is old looks to be
1130 An exceptional case exists for struct arguments (and possibly other
1131 aggregates such as arrays) -- if the size is larger than WORDSIZE bytes but
1132 not a multiple of WORDSIZE bytes. In this case the argument is never split
1133 between the registers and the stack, but instead is copied in its entirety
1134 onto the stack, AND also copied into as many registers as there is room
1135 for. In other words, space in registers permitting, two copies of the same
1136 argument are passed in. As far as I can tell, only the one on the stack is
1137 used, although that may be a function of the level of compiler
1138 optimization. I suspect this is a compiler bug. Arguments of these odd
1139 sizes are left-justified within the word (as opposed to arguments smaller
1140 than WORDSIZE bytes, which are right-justified).
1142 If the function is to return an aggregate type such as a struct, the caller
1143 must allocate space into which the callee will copy the return value. In
1144 this case, a pointer to the return value location is passed into the callee
1145 in register R0, which displaces one of the other arguments passed in via
1146 registers R0 to R2. */
1149 avr_push_dummy_call (struct gdbarch
*gdbarch
, struct value
*function
,
1150 struct regcache
*regcache
, CORE_ADDR bp_addr
,
1151 int nargs
, struct value
**args
, CORE_ADDR sp
,
1152 int struct_return
, CORE_ADDR struct_addr
)
1155 unsigned char buf
[2];
1156 CORE_ADDR return_pc
= avr_convert_iaddr_to_raw (bp_addr
);
1157 int regnum
= AVR_ARGN_REGNUM
;
1158 struct stack_item
*si
= NULL
;
1161 /* FIXME: TRoth/2003-06-18: Not sure what to do when returning a struct. */
1164 fprintf_unfiltered (gdb_stderr
, "struct_return: 0x%lx\n", struct_addr
);
1165 write_register (argreg
--, struct_addr
& 0xff);
1166 write_register (argreg
--, (struct_addr
>>8) & 0xff);
1170 for (i
= 0; i
< nargs
; i
++)
1174 struct value
*arg
= args
[i
];
1175 struct type
*type
= check_typedef (value_type (arg
));
1176 const bfd_byte
*contents
= value_contents (arg
);
1177 int len
= TYPE_LENGTH (type
);
1179 /* Calculate the potential last register needed. */
1180 last_regnum
= regnum
- (len
+ (len
& 1));
1182 /* If there are registers available, use them. Once we start putting
1183 stuff on the stack, all subsequent args go on stack. */
1184 if ((si
== NULL
) && (last_regnum
>= 8))
1188 /* Skip a register for odd length args. */
1192 val
= extract_unsigned_integer (contents
, len
);
1193 for (j
=0; j
<len
; j
++)
1195 regcache_cooked_write_unsigned (regcache
, regnum
--,
1196 val
>> (8*(len
-j
-1)));
1199 /* No registers available, push the args onto the stack. */
1202 /* From here on, we don't care about regnum. */
1203 si
= push_stack_item (si
, contents
, len
);
1207 /* Push args onto the stack. */
1211 /* Add 1 to sp here to account for post decr nature of pushes. */
1212 write_memory (sp
+1, si
->data
, si
->len
);
1213 si
= pop_stack_item (si
);
1216 /* Set the return address. For the avr, the return address is the BP_ADDR.
1217 Need to push the return address onto the stack noting that it needs to be
1218 in big-endian order on the stack. */
1219 buf
[0] = (return_pc
>> 8) & 0xff;
1220 buf
[1] = return_pc
& 0xff;
1223 write_memory (sp
+1, buf
, 2); /* Add one since pushes are post decr ops. */
1225 /* Finally, update the SP register. */
1226 regcache_cooked_write_unsigned (regcache
, AVR_SP_REGNUM
,
1227 avr_convert_saddr_to_raw (sp
));
1232 /* Initialize the gdbarch structure for the AVR's. */
1234 static struct gdbarch
*
1235 avr_gdbarch_init (struct gdbarch_info info
, struct gdbarch_list
*arches
)
1237 struct gdbarch
*gdbarch
;
1238 struct gdbarch_tdep
*tdep
;
1240 /* Find a candidate among the list of pre-declared architectures. */
1241 arches
= gdbarch_list_lookup_by_info (arches
, &info
);
1243 return arches
->gdbarch
;
1245 /* None found, create a new architecture from the information provided. */
1246 tdep
= XMALLOC (struct gdbarch_tdep
);
1247 gdbarch
= gdbarch_alloc (&info
, tdep
);
1249 /* If we ever need to differentiate the device types, do it here. */
1250 switch (info
.bfd_arch_info
->mach
)
1260 set_gdbarch_short_bit (gdbarch
, 2 * TARGET_CHAR_BIT
);
1261 set_gdbarch_int_bit (gdbarch
, 2 * TARGET_CHAR_BIT
);
1262 set_gdbarch_long_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
1263 set_gdbarch_long_long_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
1264 set_gdbarch_ptr_bit (gdbarch
, 2 * TARGET_CHAR_BIT
);
1265 set_gdbarch_addr_bit (gdbarch
, 32);
1267 set_gdbarch_float_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
1268 set_gdbarch_double_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
1269 set_gdbarch_long_double_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
1271 set_gdbarch_float_format (gdbarch
, floatformats_ieee_single
);
1272 set_gdbarch_double_format (gdbarch
, floatformats_ieee_single
);
1273 set_gdbarch_long_double_format (gdbarch
, floatformats_ieee_single
);
1275 set_gdbarch_read_pc (gdbarch
, avr_read_pc
);
1276 set_gdbarch_write_pc (gdbarch
, avr_write_pc
);
1277 set_gdbarch_read_sp (gdbarch
, avr_read_sp
);
1279 set_gdbarch_num_regs (gdbarch
, AVR_NUM_REGS
);
1281 set_gdbarch_sp_regnum (gdbarch
, AVR_SP_REGNUM
);
1282 set_gdbarch_pc_regnum (gdbarch
, AVR_PC_REGNUM
);
1284 set_gdbarch_register_name (gdbarch
, avr_register_name
);
1285 set_gdbarch_register_type (gdbarch
, avr_register_type
);
1287 set_gdbarch_extract_return_value (gdbarch
, avr_extract_return_value
);
1288 set_gdbarch_print_insn (gdbarch
, print_insn_avr
);
1290 set_gdbarch_push_dummy_call (gdbarch
, avr_push_dummy_call
);
1292 set_gdbarch_address_to_pointer (gdbarch
, avr_address_to_pointer
);
1293 set_gdbarch_pointer_to_address (gdbarch
, avr_pointer_to_address
);
1295 set_gdbarch_skip_prologue (gdbarch
, avr_skip_prologue
);
1296 set_gdbarch_inner_than (gdbarch
, core_addr_lessthan
);
1298 set_gdbarch_breakpoint_from_pc (gdbarch
, avr_breakpoint_from_pc
);
1300 frame_unwind_append_sniffer (gdbarch
, avr_frame_sniffer
);
1301 frame_base_set_default (gdbarch
, &avr_frame_base
);
1303 set_gdbarch_unwind_dummy_id (gdbarch
, avr_unwind_dummy_id
);
1305 set_gdbarch_unwind_pc (gdbarch
, avr_unwind_pc
);
1310 /* Send a query request to the avr remote target asking for values of the io
1311 registers. If args parameter is not NULL, then the user has requested info
1312 on a specific io register [This still needs implemented and is ignored for
1313 now]. The query string should be one of these forms:
1315 "Ravr.io_reg" -> reply is "NN" number of io registers
1317 "Ravr.io_reg:addr,len" where addr is first register and len is number of
1318 registers to be read. The reply should be "<NAME>,VV;" for each io register
1319 where, <NAME> is a string, and VV is the hex value of the register.
1321 All io registers are 8-bit. */
1324 avr_io_reg_read_command (char *args
, int from_tty
)
1330 unsigned int nreg
= 0;
1334 /* Find out how many io registers the target has. */
1335 bufsiz
= target_read_alloc (¤t_target
, TARGET_OBJECT_AVR
,
1336 "avr.io_reg", &buf
);
1340 fprintf_unfiltered (gdb_stderr
,
1341 _("ERR: info io_registers NOT supported "
1342 "by current target\n"));
1346 if (sscanf (buf
, "%x", &nreg
) != 1)
1348 fprintf_unfiltered (gdb_stderr
,
1349 _("Error fetching number of io registers\n"));
1356 reinitialize_more_filter ();
1358 printf_unfiltered (_("Target has %u io registers:\n\n"), nreg
);
1360 /* only fetch up to 8 registers at a time to keep the buffer small */
1363 for (i
= 0; i
< nreg
; i
+= step
)
1365 /* how many registers this round? */
1368 j
= nreg
- i
; /* last block is less than 8 registers */
1370 snprintf (query
, sizeof (query
) - 1, "avr.io_reg:%x,%x", i
, j
);
1371 bufsiz
= target_read_alloc (¤t_target
, TARGET_OBJECT_AVR
,
1375 for (k
= i
; k
< (i
+ j
); k
++)
1377 if (sscanf (p
, "%[^,],%x;", query
, &val
) == 2)
1379 printf_filtered ("[%02x] %-15s : %02x\n", k
, query
, val
);
1380 while ((*p
!= ';') && (*p
!= '\0'))
1382 p
++; /* skip over ';' */
1392 extern initialize_file_ftype _initialize_avr_tdep
; /* -Wmissing-prototypes */
1395 _initialize_avr_tdep (void)
1397 register_gdbarch_init (bfd_arch_avr
, avr_gdbarch_init
);
1399 /* Add a new command to allow the user to query the avr remote target for
1400 the values of the io space registers in a saner way than just using
1403 /* FIXME: TRoth/2002-02-18: This should probably be changed to 'info avr
1404 io_registers' to signify it is not available on other platforms. */
1406 add_cmd ("io_registers", class_info
, avr_io_reg_read_command
,
1407 _("query remote avr target for io space register values"),