1 /* Parameters for execution on any Hewlett-Packard PA-RISC machine.
2 Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
3 1998, 1999, 2000 Free Software Foundation, Inc.
5 Contributed by the Center for Software Science at the
6 University of Utah (pa-gdb-bugs@cs.utah.edu).
8 This file is part of GDB.
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 59 Temple Place - Suite 330,
23 Boston, MA 02111-1307, USA. */
27 /* Forward declarations of some types we use in prototypes */
30 struct frame_saved_regs
;
33 struct inferior_status
;
35 /* By default assume we don't have to worry about software floating point. */
40 /* Get at various relevent fields of an instruction word. */
44 #define MASK_14 0x3fff
45 #define MASK_21 0x1fffff
47 /* This macro gets bit fields using HP's numbering (MSB = 0) */
49 #define GET_FIELD(X, FROM, TO) \
50 ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1))
53 /* On the PA, any pass-by-value structure > 8 bytes is actually
54 passed via a pointer regardless of its type or the compiler
57 #define REG_STRUCT_HAS_ADDR(gcc_p,type) \
58 (TYPE_LENGTH (type) > 8)
60 /* Offset from address of function to start of its code.
61 Zero on most machines. */
63 #define FUNCTION_START_OFFSET 0
65 /* Advance PC across any function entry prologue instructions
66 to reach some "real" code. */
68 extern CORE_ADDR
hppa_skip_prologue (CORE_ADDR
);
69 #define SKIP_PROLOGUE(pc) (hppa_skip_prologue (pc))
71 /* If PC is in some function-call trampoline code, return the PC
72 where the function itself actually starts. If not, return NULL. */
74 #define SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc, NULL)
75 extern CORE_ADDR
skip_trampoline_code (CORE_ADDR
, char *);
77 /* Return non-zero if we are in an appropriate trampoline. */
79 #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \
80 in_solib_call_trampoline (pc, name)
81 extern int in_solib_call_trampoline (CORE_ADDR
, char *);
83 #define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \
84 in_solib_return_trampoline (pc, name)
85 extern int in_solib_return_trampoline (CORE_ADDR
, char *);
87 /* Immediately after a function call, return the saved pc.
88 Can't go through the frames for this because on some machines
89 the new frame is not set up until the new function executes
92 #undef SAVED_PC_AFTER_CALL
93 #define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call (frame)
94 extern CORE_ADDR
saved_pc_after_call (struct frame_info
*);
96 /* Stack grows upward */
97 #define INNER_THAN(lhs,rhs) ((lhs) > (rhs))
99 /* elz: adjust the quantity to the next highest value which is 64-bit aligned.
100 This is used in valops.c, when the sp is adjusted.
101 On hppa the sp must always be kept 64-bit aligned */
103 #define STACK_ALIGN(arg) ( ((arg)%8) ? (((arg)+7)&-8) : (arg))
104 #define EXTRA_STACK_ALIGNMENT_NEEDED 0
106 /* Sequence of bytes for breakpoint instruction. */
108 #define BREAKPOINT {0x00, 0x01, 0x00, 0x04}
109 #define BREAKPOINT32 0x10004
111 /* Amount PC must be decremented by after a breakpoint.
112 This is often the number of bytes in BREAKPOINT
115 Not on the PA-RISC */
117 #define DECR_PC_AFTER_BREAK 0
119 /* Sometimes we may pluck out a minimal symbol that has a negative
122 An example of this occurs when an a.out is linked against a foo.sl.
123 The foo.sl defines a global bar(), and the a.out declares a signature
124 for bar(). However, the a.out doesn't directly call bar(), but passes
125 its address in another call.
127 If you have this scenario and attempt to "break bar" before running,
128 gdb will find a minimal symbol for bar() in the a.out. But that
129 symbol's address will be negative. What this appears to denote is
130 an index backwards from the base of the procedure linkage table (PLT)
131 into the data linkage table (DLT), the end of which is contiguous
132 with the start of the PLT. This is clearly not a valid address for
133 us to set a breakpoint on.
135 Note that one must be careful in how one checks for a negative address.
136 0xc0000000 is a legitimate address of something in a shared text
137 segment, for example. Since I don't know what the possible range
138 is of these "really, truly negative" addresses that come from the
139 minimal symbols, I'm resorting to the gross hack of checking the
140 top byte of the address for all 1's. Sigh.
142 #define PC_REQUIRES_RUN_BEFORE_USE(pc) \
143 (! target_has_stack && (pc & 0xFF000000))
145 /* return instruction is bv r0(rp) or bv,n r0(rp) */
147 #define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 4) | 0x2) == 0xE840C002)
149 /* Say how long (ordinary) registers are. This is a piece of bogosity
150 used in push_word and a few other places; REGISTER_RAW_SIZE is the
151 real way to know how big a register is. */
153 #define REGISTER_SIZE 4
155 /* Number of machine registers */
159 /* Initializer for an array of names of registers.
160 There should be NUM_REGS strings in this initializer.
161 They are in rows of eight entries */
163 #define REGISTER_NAMES \
164 {"flags", "r1", "rp", "r3", "r4", "r5", "r6", "r7", \
165 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
166 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
167 "r24", "r25", "r26", "dp", "ret0", "ret1", "sp", "r31", \
168 "sar", "pcoqh", "pcsqh", "pcoqt", "pcsqt", "eiem", "iir", "isr", \
169 "ior", "ipsw", "goto", "sr4", "sr0", "sr1", "sr2", "sr3", \
170 "sr5", "sr6", "sr7", "cr0", "cr8", "cr9", "ccr", "cr12", \
171 "cr13", "cr24", "cr25", "cr26", "mpsfu_high","mpsfu_low","mpsfu_ovflo","pad",\
172 "fpsr", "fpe1", "fpe2", "fpe3", "fpe4", "fpe5", "fpe6", "fpe7", \
173 "fr4", "fr4R", "fr5", "fr5R", "fr6", "fr6R", "fr7", "fr7R", \
174 "fr8", "fr8R", "fr9", "fr9R", "fr10", "fr10R", "fr11", "fr11R", \
175 "fr12", "fr12R", "fr13", "fr13R", "fr14", "fr14R", "fr15", "fr15R", \
176 "fr16", "fr16R", "fr17", "fr17R", "fr18", "fr18R", "fr19", "fr19R", \
177 "fr20", "fr20R", "fr21", "fr21R", "fr22", "fr22R", "fr23", "fr23R", \
178 "fr24", "fr24R", "fr25", "fr25R", "fr26", "fr26R", "fr27", "fr27R", \
179 "fr28", "fr28R", "fr29", "fr29R", "fr30", "fr30R", "fr31", "fr31R"}
181 /* Register numbers of various important registers.
182 Note that some of these values are "real" register numbers,
183 and correspond to the general registers of the machine,
184 and some are "phony" register numbers which are too large
185 to be actual register numbers as far as the user is concerned
186 but do serve to get the desired values when passed to read_register. */
188 #define R0_REGNUM 0 /* Doesn't actually exist, used as base for
189 other r registers. */
190 #define FLAGS_REGNUM 0 /* Various status flags */
191 #define RP_REGNUM 2 /* return pointer */
192 #define FP_REGNUM 3 /* Contains address of executing stack */
194 #define SP_REGNUM 30 /* Contains address of top of stack */
195 #define SAR_REGNUM 32 /* Shift Amount Register */
196 #define IPSW_REGNUM 41 /* Interrupt Processor Status Word */
197 #define PCOQ_HEAD_REGNUM 33 /* instruction offset queue head */
198 #define PCSQ_HEAD_REGNUM 34 /* instruction space queue head */
199 #define PCOQ_TAIL_REGNUM 35 /* instruction offset queue tail */
200 #define PCSQ_TAIL_REGNUM 36 /* instruction space queue tail */
201 #define EIEM_REGNUM 37 /* External Interrupt Enable Mask */
202 #define IIR_REGNUM 38 /* Interrupt Instruction Register */
203 #define IOR_REGNUM 40 /* Interrupt Offset Register */
204 #define SR4_REGNUM 43 /* space register 4 */
205 #define RCR_REGNUM 51 /* Recover Counter (also known as cr0) */
206 #define CCR_REGNUM 54 /* Coprocessor Configuration Register */
207 #define TR0_REGNUM 57 /* Temporary Registers (cr24 -> cr31) */
208 #define CR27_REGNUM 60 /* Base register for thread-local storage, cr27 */
209 #define FP0_REGNUM 64 /* floating point reg. 0 (fspr) */
210 #define FP4_REGNUM 72
212 #define ARG0_REGNUM 26 /* The first argument of a callee. */
213 #define ARG1_REGNUM 25 /* The second argument of a callee. */
214 #define ARG2_REGNUM 24 /* The third argument of a callee. */
215 #define ARG3_REGNUM 23 /* The fourth argument of a callee. */
217 /* compatibility with the rest of gdb. */
218 #define PC_REGNUM PCOQ_HEAD_REGNUM
219 #define NPC_REGNUM PCOQ_TAIL_REGNUM
222 * Processor Status Word Masks
225 #define PSW_T 0x01000000 /* Taken Branch Trap Enable */
226 #define PSW_H 0x00800000 /* Higher-Privilege Transfer Trap Enable */
227 #define PSW_L 0x00400000 /* Lower-Privilege Transfer Trap Enable */
228 #define PSW_N 0x00200000 /* PC Queue Front Instruction Nullified */
229 #define PSW_X 0x00100000 /* Data Memory Break Disable */
230 #define PSW_B 0x00080000 /* Taken Branch in Previous Cycle */
231 #define PSW_C 0x00040000 /* Code Address Translation Enable */
232 #define PSW_V 0x00020000 /* Divide Step Correction */
233 #define PSW_M 0x00010000 /* High-Priority Machine Check Disable */
234 #define PSW_CB 0x0000ff00 /* Carry/Borrow Bits */
235 #define PSW_R 0x00000010 /* Recovery Counter Enable */
236 #define PSW_Q 0x00000008 /* Interruption State Collection Enable */
237 #define PSW_P 0x00000004 /* Protection ID Validation Enable */
238 #define PSW_D 0x00000002 /* Data Address Translation Enable */
239 #define PSW_I 0x00000001 /* External, Power Failure, Low-Priority */
240 /* Machine Check Interruption Enable */
242 /* When fetching register values from an inferior or a core file,
243 clean them up using this macro. BUF is a char pointer to
244 the raw value of the register in the registers[] array. */
246 #define DEPRECATED_CLEAN_UP_REGISTER_VALUE(regno, buf) \
248 if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \
249 (buf)[sizeof(CORE_ADDR) -1] &= ~0x3; \
252 /* Define DO_REGISTERS_INFO() to do machine-specific formatting
253 of register dumps. */
255 #define DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp)
256 extern void pa_do_registers_info (int, int);
259 #define STRCAT_REGISTER(regnum, fpregs, stream, precision) pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
260 extern void pa_do_strcat_registers_info (int, int, struct ui_file
*, enum precision_type
);
263 /* PA specific macro to see if the current instruction is nullified. */
264 #ifndef INSTRUCTION_NULLIFIED
265 #define INSTRUCTION_NULLIFIED \
266 (((int)read_register (IPSW_REGNUM) & 0x00200000) && \
267 !((int)read_register (FLAGS_REGNUM) & 0x2))
270 /* Number of bytes of storage in the actual machine representation
271 for register N. On the PA-RISC, all regs are 4 bytes, including
272 the FP registers (they're accessed as two 4 byte halves). */
274 #define REGISTER_RAW_SIZE(N) 4
276 /* Total amount of space needed to store our copies of the machine's
277 register state, the array `registers'. */
278 #define REGISTER_BYTES (NUM_REGS * 4)
280 /* Index within `registers' of the first byte of the space for
283 #define REGISTER_BYTE(N) (N) * 4
285 /* Number of bytes of storage in the program's representation
288 #define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
290 /* Largest value REGISTER_RAW_SIZE can have. */
292 #define MAX_REGISTER_RAW_SIZE 4
294 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
296 #define MAX_REGISTER_VIRTUAL_SIZE 8
298 /* Return the GDB type object for the "standard" data type
299 of data in register N. */
301 #define REGISTER_VIRTUAL_TYPE(N) \
302 ((N) < FP4_REGNUM ? builtin_type_int : builtin_type_float)
304 /* Store the address of the place in which to copy the structure the
305 subroutine will return. This is called from call_function. */
307 #define STORE_STRUCT_RETURN(ADDR, SP) {write_register (28, (ADDR)); }
309 /* Extract from an array REGBUF containing the (raw) register state
310 a function return value of type TYPE, and copy that, in virtual format,
313 void hppa_extract_return_value (struct type
*type
, char *regbuf
, char *valbuf
);
314 #define DEPRECATED_EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
315 hppa_extract_return_value (TYPE, REGBUF, VALBUF);
317 /* elz: decide whether the function returning a value of type type
318 will put it on the stack or in the registers.
319 The pa calling convention says that:
320 register 28 (called ret0 by gdb) contains any ASCII char,
321 and any non_floating point value up to 32-bits.
322 reg 28 and 29 contain non-floating point up tp 64 bits and larger
323 than 32 bits. (higer order word in reg 28).
324 fr4: floating point up to 64 bits
325 sr1: space identifier (32-bit)
326 stack: any lager than 64-bit, with the address in r28
328 extern use_struct_convention_fn hppa_use_struct_convention
;
329 #define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type)
331 /* Write into appropriate registers a function return value
332 of type TYPE, given in virtual format. */
335 extern void hppa_store_return_value (struct type
*type
, char *valbuf
);
336 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
337 hppa_store_return_value (TYPE, VALBUF);
339 /* Extract from an array REGBUF containing the (raw) register state
340 the address in which a function should return its structure value,
341 as a CORE_ADDR (or an expression that can be used as one). */
343 #define DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
344 (*(int *)((REGBUF) + REGISTER_BYTE (28)))
346 /* elz: Return a large value, which is stored on the stack at addr.
347 This is defined only for the hppa, at this moment. The above macro
348 DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore,
349 because it assumes that on exit from a called function which
350 returns a large structure on the stack, the address of the ret
351 structure is still in register 28. Unfortunately this register is
352 usually overwritten by the called function itself, on hppa. This is
353 specified in the calling convention doc. As far as I know, the only
354 way to get the return value is to have the caller tell us where it
355 told the callee to put it, rather than have the callee tell us. */
356 struct value
*hppa_value_returned_from_stack (register struct type
*valtype
,
358 #define VALUE_RETURNED_FROM_STACK(valtype,addr) \
359 hppa_value_returned_from_stack (valtype, addr)
362 * This macro defines the register numbers (from REGISTER_NAMES) that
363 * are effectively unavailable to the user through ptrace(). It allows
364 * us to include the whole register set in REGISTER_NAMES (inorder to
365 * better support remote debugging). If it is used in
366 * fetch/store_inferior_registers() gdb will not complain about I/O errors
367 * on fetching these registers. If all registers in REGISTER_NAMES
368 * are available, then return false (0).
371 #define CANNOT_STORE_REGISTER(regno) \
373 ((regno) == PCSQ_HEAD_REGNUM) || \
374 ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \
375 ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
377 #define INIT_EXTRA_FRAME_INFO(fromleaf, frame) init_extra_frame_info (fromleaf, frame)
378 extern void init_extra_frame_info (int, struct frame_info
*);
380 /* Describe the pointer in each stack frame to the previous stack frame
383 /* FRAME_CHAIN takes a frame's nominal address and produces the
384 frame's chain-pointer. */
386 /* In the case of the PA-RISC, the frame's nominal address
387 is the address of a 4-byte word containing the calling frame's
388 address (previous FP). */
390 #define FRAME_CHAIN(thisframe) frame_chain (thisframe)
391 extern CORE_ADDR
frame_chain (struct frame_info
*);
393 extern int hppa_frame_chain_valid (CORE_ADDR
, struct frame_info
*);
394 #define FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe)
396 /* Define other aspects of the stack frame. */
398 /* A macro that tells us whether the function invocation represented
399 by FI does not have a frame on the stack associated with it. If it
400 does not, FRAMELESS is set to 1, else 0. */
401 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
402 (frameless_function_invocation (FI))
403 extern int frameless_function_invocation (struct frame_info
*);
405 extern CORE_ADDR
hppa_frame_saved_pc (struct frame_info
*frame
);
406 #define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME)
408 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
410 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
411 /* Set VAL to the number of args passed to frame described by FI.
412 Can set VAL to -1, meaning no way to tell. */
414 /* We can't tell how many args there are
415 now that the C compiler delays popping them. */
416 #define FRAME_NUM_ARGS(fi) (-1)
418 /* Return number of bytes at start of arglist that are not really args. */
420 #define FRAME_ARGS_SKIP 0
422 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
423 hppa_frame_find_saved_regs (frame_info, &frame_saved_regs)
425 hppa_frame_find_saved_regs (struct frame_info
*, struct frame_saved_regs
*);
428 /* Things needed for making the inferior call functions. */
430 /* Push an empty stack frame, to record the current PC, etc. */
432 #define PUSH_DUMMY_FRAME push_dummy_frame (inf_status)
433 extern void push_dummy_frame (struct inferior_status
*);
435 /* Discard from the stack the innermost frame,
436 restoring all saved registers. */
437 #define POP_FRAME hppa_pop_frame ()
438 extern void hppa_pop_frame (void);
440 #define INSTRUCTION_SIZE 4
444 /* Non-level zero PA's have space registers (but they don't always have
445 floating-point, do they???? */
447 /* This sequence of words is the instructions
449 ; Call stack frame has already been built by gdb. Since we could be calling
450 ; a varargs function, and we do not have the benefit of a stub to put things in
451 ; the right place, we load the first 4 word of arguments into both the general
462 fldds -12(0, r1), fr7
463 ldil 0, r22 ; FUNC_LDIL_OFFSET must point here
464 ldo 0(r22), r22 ; FUNC_LDO_OFFSET must point here
466 ldil 0, r1 ; SR4EXPORT_LDIL_OFFSET must point here
467 ldo 0(r1), r1 ; SR4EXPORT_LDO_OFFSET must point here
469 combt,=,n r4, r20, text_space ; If target is in data space, do a
470 ble 0(sr5, r22) ; "normal" procedure call
475 text_space ; Otherwise, go through _sr4export,
476 ble (sr4, r1) ; which will return back here.
481 nop ; To avoid kernel bugs
482 nop ; and keep the dummy 8 byte aligned
484 The dummy decides if the target is in text space or data space. If
485 it's in data space, there's no problem because the target can
486 return back to the dummy. However, if the target is in text space,
487 the dummy calls the secret, undocumented routine _sr4export, which
488 calls a function in text space and can return to any space. Instead
489 of including fake instructions to represent saved registers, we
490 know that the frame is associated with the call dummy and treat it
493 The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1
494 kernels. If the memory at the location pointed to by the PC is
495 0xffffffff then a ptrace step call will fail (even if the instruction
498 The code to pop a dummy frame single steps three instructions
499 starting with the last mtsp. This includes the nullified "instruction"
500 following the ble (which is uninitialized junk). If the
501 "instruction" following the last BLE is 0xffffffff, then the ptrace
502 will fail and the dummy frame is not correctly popped.
504 By placing a NOP in the delay slot of the BLE instruction we can be
505 sure that we never try to execute a 0xffffffff instruction and
506 avoid the kernel bug. The second NOP is needed to keep the call
507 dummy 8 byte aligned. */
509 /* Define offsets into the call dummy for the target function address */
510 #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9)
511 #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10)
513 /* Define offsets into the call dummy for the _sr4export address */
514 #define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12)
515 #define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13)
517 #define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\
518 0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\
519 0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\
520 0x20200000, 0x34210000, 0x002010b4, 0x82842022,\
521 0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\
522 0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\
523 0x00151820, 0xe6c00002, 0x08000240, 0x08000240}
525 #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28)
526 #define REG_PARM_STACK_SPACE 16
528 #else /* defined PA_LEVEL_0 */
530 /* This is the call dummy for a level 0 PA. Level 0's don't have space
531 registers (or floating point?), so we skip all that inter-space call stuff,
532 and avoid touching the fp regs.
540 ldil 0, %r31 ; FUNC_LDIL_OFFSET must point here
541 ldo 0(%r31), %r31 ; FUNC_LDO_OFFSET must point here
545 nop ; restore_pc_queue expects these
546 bv,n 0(%r22) ; instructions to be here...
550 /* Define offsets into the call dummy for the target function address */
551 #define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4)
552 #define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5)
554 #define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\
555 0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\
556 0x00010004, 0x08000240, 0xeac0c002, 0x08000240}
558 #define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12)
562 #define CALL_DUMMY_START_OFFSET 0
564 /* If we've reached a trap instruction within the call dummy, then
565 we'll consider that to mean that we've reached the call dummy's
566 end after its successful completion. */
567 #define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
568 (PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \
569 (read_memory_integer((pc), 4) == BREAKPOINT32))
572 * Insert the specified number of args and function address
573 * into a call sequence of the above form stored at DUMMYNAME.
575 * On the hppa we need to call the stack dummy through $$dyncall.
576 * Therefore our version of FIX_CALL_DUMMY takes an extra argument,
577 * real_pc, which is the location where gdb should start up the
578 * inferior to do the function call.
581 #define FIX_CALL_DUMMY hppa_fix_call_dummy
584 hppa_fix_call_dummy (char *, CORE_ADDR
, CORE_ADDR
, int,
585 struct value
**, struct type
*, int);
587 #define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
588 (hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr)))
590 hppa_push_arguments (int, struct value
**, CORE_ADDR
, int, CORE_ADDR
);
592 /* The low two bits of the PC on the PA contain the privilege level. Some
593 genius implementing a (non-GCC) compiler apparently decided this means
594 that "addresses" in a text section therefore include a privilege level,
595 and thus symbol tables should contain these bits. This seems like a
596 bonehead thing to do--anyway, it seems to work for our purposes to just
597 ignore those bits. */
598 #define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x3)
600 #define GDB_TARGET_IS_HPPA
602 #define BELIEVE_PCC_PROMOTION 1
605 * Unwind table and descriptor.
608 struct unwind_table_entry
610 CORE_ADDR region_start
;
611 CORE_ADDR region_end
;
613 unsigned int Cannot_unwind
:1; /* 0 */
614 unsigned int Millicode
:1; /* 1 */
615 unsigned int Millicode_save_sr0
:1; /* 2 */
616 unsigned int Region_description
:2; /* 3..4 */
617 unsigned int reserved1
:1; /* 5 */
618 unsigned int Entry_SR
:1; /* 6 */
619 unsigned int Entry_FR
:4; /* number saved *//* 7..10 */
620 unsigned int Entry_GR
:5; /* number saved *//* 11..15 */
621 unsigned int Args_stored
:1; /* 16 */
622 unsigned int Variable_Frame
:1; /* 17 */
623 unsigned int Separate_Package_Body
:1; /* 18 */
624 unsigned int Frame_Extension_Millicode
:1; /* 19 */
625 unsigned int Stack_Overflow_Check
:1; /* 20 */
626 unsigned int Two_Instruction_SP_Increment
:1; /* 21 */
627 unsigned int Ada_Region
:1; /* 22 */
628 unsigned int cxx_info
:1; /* 23 */
629 unsigned int cxx_try_catch
:1; /* 24 */
630 unsigned int sched_entry_seq
:1; /* 25 */
631 unsigned int reserved2
:1; /* 26 */
632 unsigned int Save_SP
:1; /* 27 */
633 unsigned int Save_RP
:1; /* 28 */
634 unsigned int Save_MRP_in_frame
:1; /* 29 */
635 unsigned int extn_ptr_defined
:1; /* 30 */
636 unsigned int Cleanup_defined
:1; /* 31 */
638 unsigned int MPE_XL_interrupt_marker
:1; /* 0 */
639 unsigned int HP_UX_interrupt_marker
:1; /* 1 */
640 unsigned int Large_frame
:1; /* 2 */
641 unsigned int Pseudo_SP_Set
:1; /* 3 */
642 unsigned int reserved4
:1; /* 4 */
643 unsigned int Total_frame_size
:27; /* 5..31 */
645 /* This is *NOT* part of an actual unwind_descriptor in an object
646 file. It is *ONLY* part of the "internalized" descriptors that
647 we create from those in a file.
651 unsigned int stub_type
:4; /* 0..3 */
652 unsigned int padding
:28; /* 4..31 */
657 /* HP linkers also generate unwinds for various linker-generated stubs.
658 GDB reads in the stubs from the $UNWIND_END$ subspace, then
659 "converts" them into normal unwind entries using some of the reserved
660 fields to store the stub type. */
662 struct stub_unwind_entry
664 /* The offset within the executable for the associated stub. */
665 unsigned stub_offset
;
667 /* The type of stub this unwind entry describes. */
670 /* Unknown. Not needed by GDB at this time. */
673 /* Length (in instructions) of the associated stub. */
677 /* Sizes (in bytes) of the native unwind entries. */
678 #define UNWIND_ENTRY_SIZE 16
679 #define STUB_UNWIND_ENTRY_SIZE 8
681 /* The gaps represent linker stubs used in MPE and space for future
683 enum unwind_stub_types
686 PARAMETER_RELOCATION
= 2,
692 /* We use the objfile->obj_private pointer for two things:
694 * 1. An unwind table;
696 * 2. A pointer to any associated shared library object.
698 * #defines are used to help refer to these objects.
701 /* Info about the unwind table associated with an object file.
703 * This is hung off of the "objfile->obj_private" pointer, and
704 * is allocated in the objfile's psymbol obstack. This allows
705 * us to have unique unwind info for each executable and shared
706 * library that we are debugging.
708 struct obj_unwind_info
710 struct unwind_table_entry
*table
; /* Pointer to unwind info */
711 struct unwind_table_entry
*cache
; /* Pointer to last entry we found */
712 int last
; /* Index of last entry */
715 typedef struct obj_private_struct
717 struct obj_unwind_info
*unwind_info
; /* a pointer */
718 struct so_list
*so_info
; /* a pointer */
724 extern void target_write_pc (CORE_ADDR
, int);
725 extern CORE_ADDR
target_read_pc (int);
726 extern CORE_ADDR
skip_trampoline_code (CORE_ADDR
, char *);
729 #define TARGET_READ_PC(pid) target_read_pc (pid)
730 extern CORE_ADDR
target_read_pc (ptid_t
);
732 #define TARGET_WRITE_PC(v,pid) target_write_pc (v,pid)
733 extern void target_write_pc (CORE_ADDR
, ptid_t
);
735 #define TARGET_READ_FP() target_read_fp (PIDGET (inferior_ptid))
736 extern CORE_ADDR
target_read_fp (int);
738 /* For a number of horrible reasons we may have to adjust the location
739 of variables on the stack. Ugh. */
740 #define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR)
742 extern int hpread_adjust_stack_address (CORE_ADDR
);
744 /* If the current gcc for for this target does not produce correct debugging
745 information for float parameters, both prototyped and unprototyped, then
746 define this macro. This forces gdb to always assume that floats are
747 passed as doubles and then converted in the callee.
749 For the pa, it appears that the debug info marks the parameters as
750 floats regardless of whether the function is prototyped, but the actual
751 values are passed as doubles for the non-prototyped case and floats for
752 the prototyped case. Thus we choose to make the non-prototyped case work
753 for C and break the prototyped case, since the non-prototyped case is
754 probably much more common. (FIXME). */
756 #define COERCE_FLOAT_TO_DOUBLE(formal, actual) (current_language -> la_language == language_c)
758 /* Here's how to step off a permanent breakpoint. */
759 #define SKIP_PERMANENT_BREAKPOINT (hppa_skip_permanent_breakpoint)
760 extern void hppa_skip_permanent_breakpoint (void);
762 /* On HP-UX, certain system routines (millicode) have names beginning
763 with $ or $$, e.g. $$dyncall, which handles inter-space procedure
764 calls on PA-RISC. Tell the expression parser to check for those
765 when parsing tokens that begin with "$". */
766 #define SYMBOLS_CAN_START_WITH_DOLLAR (1)