1 /* Target machine sub-parameters for SPARC64, for GDB, the GNU debugger.
2 This is included by other tm-*.h files to define SPARC64 cpu-related info.
3 Copyright 1994, 1995, 1996 Free Software Foundation, Inc.
4 This is (obviously) based on the SPARC Vn (n<9) port.
5 Contributed by Doug Evans (dje@cygnus.com).
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
23 #define GDB_TARGET_IS_SPARC64
25 #include "sparc/tm-sparc.h"
27 /* Stack has strict alignment. */
30 #define STACK_ALIGN(ADDR) (((ADDR)+15)&-16)
32 /* Number of machine registers. */
37 /* Initializer for an array of names of registers.
38 There should be NUM_REGS strings in this initializer. */
39 /* Some of these registers are only accessible from priviledged mode.
40 They are here for kernel debuggers, etc. */
41 /* FIXME: icc and xcc are currently considered separate registers.
42 This may have to change and consider them as just one (ccr).
43 Let's postpone this as long as we can. It's nice to be able to set
45 /* FIXME: fcc0-3 are currently separate, even though they are also part of
46 fsr. May have to remove them but let's postpone this as long as
47 possible. It's nice to be able to set them individually. */
48 /* FIXME: Whether to include f33, f35, etc. here is not clear.
49 There are advantages and disadvantages. */
52 #define REGISTER_NAMES \
53 { "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7", \
54 "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7", \
55 "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", \
56 "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7", \
58 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
59 "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
60 "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \
61 "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \
62 "f32", "f34", "f36", "f38", "f40", "f42", "f44", "f46", \
63 "f48", "f50", "f52", "f54", "f56", "f58", "f60", "f62", \
65 "pc", "npc", "ccr", "fsr", "fprs", "y", "asi", \
66 "ver", "tick", "pil", "pstate", \
67 "tstate", "tba", "tl", "tt", "tpc", "tnpc", "wstate", \
68 "cwp", "cansave", "canrestore", "cleanwin", "otherwin", \
69 "asr16", "asr17", "asr18", "asr19", "asr20", "asr21", \
70 "asr22", "asr23", "asr24", "asr25", "asr26", "asr27", \
71 "asr28", "asr29", "asr30", "asr31", \
72 /* These are here at the end to simplify removing them if we have to. */ \
73 "icc", "xcc", "fcc0", "fcc1", "fcc2", "fcc3" \
76 /* Register numbers of various important registers.
77 Note that some of these values are "real" register numbers,
78 and correspond to the general registers of the machine,
79 and some are "phony" register numbers which are too large
80 to be actual register numbers as far as the user is concerned
81 but do serve to get the desired values when passed to read_register. */
83 #if 0 /* defined in tm-sparc.h, replicated for doc purposes */
84 #define G0_REGNUM 0 /* %g0 */
85 #define G1_REGNUM 1 /* %g1 */
86 #define O0_REGNUM 8 /* %o0 */
87 #define SP_REGNUM 14 /* Contains address of top of stack, \
88 which is also the bottom of the frame. */
89 #define RP_REGNUM 15 /* Contains return address value, *before* \
90 any windows get switched. */
91 #define O7_REGNUM 15 /* Last local reg not saved on stack frame */
92 #define L0_REGNUM 16 /* First local reg that's saved on stack frame
93 rather than in machine registers */
94 #define I0_REGNUM 24 /* %i0 */
95 #define FP_REGNUM 30 /* Contains address of executing stack frame */
96 #define I7_REGNUM 31 /* Last local reg saved on stack frame */
97 #define FP0_REGNUM 32 /* Floating point register 0 */
100 #define FP_MAX_REGNUM 80 /* 1 + last fp reg number */
102 /* #undef v8 misc. regs */
113 /* v9 misc. and priv. regs */
115 #define C0_REGNUM FP_MAX_REGNUM /* Start of control registers */
116 #define PC_REGNUM (C0_REGNUM + 0) /* Current PC */
117 #define NPC_REGNUM (C0_REGNUM + 1) /* Next PC */
118 #define CCR_REGNUM (C0_REGNUM + 2) /* Condition Code Register (%xcc,%icc) */
119 #define FSR_REGNUM (C0_REGNUM + 3) /* Floating Point State */
120 #define FPRS_REGNUM (C0_REGNUM + 4) /* Floating Point Registers State */
121 #define Y_REGNUM (C0_REGNUM + 5) /* Temp register for multiplication, etc. */
122 #define ASI_REGNUM (C0_REGNUM + 6) /* Alternate Space Identifier */
123 #define VER_REGNUM (C0_REGNUM + 7) /* Version register */
124 #define TICK_REGNUM (C0_REGNUM + 8) /* Tick register */
125 #define PIL_REGNUM (C0_REGNUM + 9) /* Processor Interrupt Level */
126 #define PSTATE_REGNUM (C0_REGNUM + 10) /* Processor State */
127 #define TSTATE_REGNUM (C0_REGNUM + 11) /* Trap State */
128 #define TBA_REGNUM (C0_REGNUM + 12) /* Trap Base Address */
129 #define TL_REGNUM (C0_REGNUM + 13) /* Trap Level */
130 #define TT_REGNUM (C0_REGNUM + 14) /* Trap Type */
131 #define TPC_REGNUM (C0_REGNUM + 15) /* Trap pc */
132 #define TNPC_REGNUM (C0_REGNUM + 16) /* Trap npc */
133 #define WSTATE_REGNUM (C0_REGNUM + 17) /* Window State */
134 #define CWP_REGNUM (C0_REGNUM + 18) /* Current Window Pointer */
135 #define CANSAVE_REGNUM (C0_REGNUM + 19) /* Savable Windows */
136 #define CANRESTORE_REGNUM (C0_REGNUM + 20) /* Restorable Windows */
137 #define CLEANWIN_REGNUM (C0_REGNUM + 21) /* Clean Windows */
138 #define OTHERWIN_REGNUM (C0_REGNUM + 22) /* Other Windows */
139 #define ASR_REGNUM(n) (C0_REGNUM+(23-16)+(n)) /* Ancillary State Register
141 #define ICC_REGNUM (C0_REGNUM + 39) /* 32 bit condition codes */
142 #define XCC_REGNUM (C0_REGNUM + 40) /* 64 bit condition codes */
143 #define FCC0_REGNUM (C0_REGNUM + 41) /* fp cc reg 0 */
144 #define FCC1_REGNUM (C0_REGNUM + 42) /* fp cc reg 1 */
145 #define FCC2_REGNUM (C0_REGNUM + 43) /* fp cc reg 2 */
146 #define FCC3_REGNUM (C0_REGNUM + 44) /* fp cc reg 3 */
148 /* Total amount of space needed to store our copies of the machine's
149 register state, the array `registers'.
150 Some of the registers aren't 64 bits, but it's a lot simpler just to assume
151 they all are (since most of them are). */
152 #undef REGISTER_BYTES
153 #define REGISTER_BYTES (32*8+32*8+45*8)
155 /* Index within `registers' of the first byte of the space for
158 #define REGISTER_BYTE(N) \
160 : (N) < 64 ? 32*8 + ((N)-32)*4 \
161 : (N) < C0_REGNUM ? 32*8 + 32*4 + ((N)-64)*8 \
162 : 64*8 + ((N)-C0_REGNUM)*8)
164 /* Say how long (ordinary) registers are. This is a piece of bogosity
165 used in push_word and a few other places; REGISTER_RAW_SIZE is the
166 real way to know how big a register is. */
169 #define REGISTER_SIZE 8
171 /* Number of bytes of storage in the actual machine representation
174 #undef REGISTER_RAW_SIZE
175 #define REGISTER_RAW_SIZE(N) \
176 ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
178 /* Number of bytes of storage in the program's representation
181 #undef REGISTER_VIRTUAL_SIZE
182 #define REGISTER_VIRTUAL_SIZE(N) \
183 ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
185 /* Largest value REGISTER_RAW_SIZE can have. */
186 /* tm-sparc.h defines this as 8, but play it safe. */
188 #undef MAX_REGISTER_RAW_SIZE
189 #define MAX_REGISTER_RAW_SIZE 8
191 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
192 /* tm-sparc.h defines this as 8, but play it safe. */
194 #undef MAX_REGISTER_VIRTUAL_SIZE
195 #define MAX_REGISTER_VIRTUAL_SIZE 8
197 /* Return the GDB type object for the "standard" data type
198 of data in register N. */
200 #undef REGISTER_VIRTUAL_TYPE
201 #define REGISTER_VIRTUAL_TYPE(N) \
202 ((N) < 32 ? builtin_type_long_long \
203 : (N) < 64 ? builtin_type_float \
204 : (N) < 80 ? builtin_type_double \
205 : builtin_type_long_long)
207 /* We use to support both 32 bit and 64 bit pointers.
208 We can't anymore because TARGET_PTR_BIT must now be a constant. */
209 #undef TARGET_PTR_BIT
210 #define TARGET_PTR_BIT 64
212 /* Does the specified function use the "struct returning" convention
213 or the "value returning" convention? The "value returning" convention
214 almost invariably returns the entire value in registers. The
215 "struct returning" convention often returns the entire value in
216 memory, and passes a pointer (out of or into the function) saying
217 where the value (is or should go).
219 Since this sometimes depends on whether it was compiled with GCC,
220 this is also an argument. This is used in call_function to build a
221 stack, and in value_being_returned to print return values.
223 On sparc64, all structs are returned via a pointer. */
225 #undef USE_STRUCT_CONVENTION
226 #define USE_STRUCT_CONVENTION(gcc_p, type) 1
228 /* Store the address of the place in which to copy the structure the
229 subroutine will return. This is called from call_function. */
230 /* FIXME: V9 uses %o0 for this. */
232 #undef STORE_STRUCT_RETURN
233 #define STORE_STRUCT_RETURN(ADDR, SP) \
234 { target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); }
236 /* Return number of bytes at start of arglist that are not really args. */
238 #undef FRAME_ARGS_SKIP
239 #define FRAME_ARGS_SKIP 136
241 /* We need two arguments (in general) to the "info frame" command.
242 Note that the definition of this macro implies that there exists a
243 function "setup_arbitrary_frame" in sparc-tdep.c */
245 #undef SETUP_ARBITRARY_FRAME /*FIXME*/
246 #undef FRAME_SPECIFICATION_DYADIC
247 #define FRAME_SPECIFICATION_DYADIC
249 /* To print every pair of float registers as a double, we use this hook.
250 We also print the condition code registers in a readable format
251 (FIXME: can expand this to all control regs). */
253 #undef PRINT_REGISTER_HOOK
254 #define PRINT_REGISTER_HOOK(regno) \
255 sparc_print_register_hook (regno)
257 /* Offsets into jmp_buf.
258 FIXME: This was borrowed from the v8 stuff and will probably have to change
261 #define JB_ELEMENT_SIZE 8 /* Size of each element in jmp_buf */
263 #define JB_ONSSTACK 0
273 /* Figure out where the longjmp will land. We expect that we have just entered
274 longjmp and haven't yet setup the stack frame, so the args are still in the
275 output regs. %o0 (O0_REGNUM) points at the jmp_buf structure from which we
276 extract the pc (JB_PC) that we will land at. The pc is copied into ADDR.
277 This routine returns true on success */
280 get_longjmp_target
PARAMS ((CORE_ADDR
*));
282 #define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
This page took 0.036616 seconds and 4 git commands to generate.