2007-07-02 Markus Deuling <deuling@de.ibm.com>
[deliverable/binutils-gdb.git] / gdb / configure.ac
1 dnl Autoconf configure script for GDB, the GNU debugger.
2 dnl Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
3 dnl 2005, 2006
4 dnl Free Software Foundation, Inc.
5 dnl
6 dnl This file is part of GDB.
7 dnl
8 dnl This program is free software; you can redistribute it and/or modify
9 dnl it under the terms of the GNU General Public License as published by
10 dnl the Free Software Foundation; either version 2 of the License, or
11 dnl (at your option) any later version.
12 dnl
13 dnl This program is distributed in the hope that it will be useful,
14 dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
15 dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 dnl GNU General Public License for more details.
17 dnl
18 dnl You should have received a copy of the GNU General Public License
19 dnl along with this program; if not, write to the Free Software
20 dnl Foundation, Inc., 51 Franklin Street, Fifth Floor,
21 dnl Boston, MA 02110-1301, USA.
22
23 dnl Process this file with autoconf to produce a configure script.
24
25 AC_PREREQ(2.59)dnl
26 AC_INIT(main.c)
27 AC_CONFIG_HEADER(config.h:config.in)
28 AM_MAINTAINER_MODE
29
30 AC_PROG_CC
31 AC_GNU_SOURCE
32 AC_AIX
33 AC_ISC_POSIX
34 AM_PROG_CC_STDC
35
36 AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
37 AC_CANONICAL_SYSTEM
38
39 dnl List of object files and targets accumulated by configure.
40
41 CONFIG_OBS=
42 CONFIG_DEPS=
43 CONFIG_SRCS=
44 ENABLE_CFLAGS=
45
46 CONFIG_ALL=
47 CONFIG_CLEAN=
48 CONFIG_INSTALL=
49 CONFIG_UNINSTALL=
50
51 dnl Set up for gettext.
52 ZW_GNU_GETTEXT_SISTER_DIR
53
54 localedir='${datadir}/locale'
55 AC_SUBST(localedir)
56
57 if test x"$USE_NLS" = xyes; then
58 CONFIG_ALL="$CONFIG_ALL all-po"
59 CONFIG_CLEAN="$CONFIG_CLEAN clean-po"
60 CONFIG_INSTALL="$CONFIG_INSTALL install-po"
61 CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
62 fi
63
64 PACKAGE=gdb
65 AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of this package. ])
66 AC_SUBST(PACKAGE)
67
68 debugdir=${libdir}/debug
69
70 AC_ARG_WITH(separate-debug-dir,
71 [ --with-separate-debug-dir=path Look for global separate debug info in this path [LIBDIR/debug]],
72 [debugdir="${withval}"])
73
74 AC_DEFINE_DIR(DEBUGDIR, debugdir,
75 [Global directory for separate debug files. ])
76 #AC_DEFINE_UNQUOTED(DEBUGDIR, "$debugdir"),
77
78 if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
79 if test "x$prefix" = xNONE; then
80 test_prefix=/usr/local
81 else
82 test_prefix=$prefix
83 fi
84 else
85 test_prefix=$exec_prefix
86 fi
87 case ${debugdir} in
88 "${test_prefix}"|"${test_prefix}/"*|\
89 '${exec_prefix}'|'${exec_prefix}/'*)
90 AC_DEFINE(DEBUGDIR_RELOCATABLE, 1, [Define if the debug directory should be relocated when GDB is moved.])
91 ;;
92 esac
93
94 AC_CONFIG_SUBDIRS(doc testsuite)
95
96 # Provide defaults for some variables set by the per-host and per-target
97 # configuration.
98 gdb_host_obs=posix-hdep.o
99
100 if test "${target}" = "${host}"; then
101 gdb_native=yes
102 else
103 gdb_native=no
104 fi
105
106 . $srcdir/configure.host
107
108 . $srcdir/configure.tgt
109
110 # Fetch the default architecture and default target vector from BFD.
111 targ=$target; . $srcdir/../bfd/config.bfd
112
113 # We only want the first architecture, so strip off the others if
114 # there is more than one.
115 targ_archs=`echo $targ_archs | sed 's/ .*//'`
116
117 if test "x$targ_archs" != x; then
118 AC_DEFINE_UNQUOTED(DEFAULT_BFD_ARCH, $targ_archs,
119 [Define to BFD's default architecture. ])
120 fi
121 if test "x$targ_defvec" != x; then
122 AC_DEFINE_UNQUOTED(DEFAULT_BFD_VEC, $targ_defvec,
123 [Define to BFD's default target vector. ])
124 fi
125
126 AC_ARG_PROGRAM
127
128 # The CLI cannot be disabled yet, but may be in the future.
129
130 # Enable CLI.
131 AC_ARG_ENABLE(gdbcli,
132 [ --disable-gdbcli disable command-line interface (CLI)],
133 [case $enableval in
134 yes)
135 ;;
136 no)
137 AC_MSG_ERROR([the command-line interface cannot be disabled yet]) ;;
138 *)
139 AC_MSG_ERROR([bad value $enableval for --enable-gdbcli]) ;;
140 esac],
141 [enable_gdbcli=yes])
142 if test x"$enable_gdbcli" = xyes; then
143 if test -d $srcdir/cli; then
144 CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_CLI_OBS)"
145 CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_CLI_DEPS)"
146 CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_CLI_SRCS)"
147 ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_CLI_CFLAGS)"
148 fi
149 fi
150
151 # Enable MI.
152 AC_ARG_ENABLE(gdbmi,
153 [ --disable-gdbmi disable machine-interface (MI)],
154 [case $enableval in
155 yes | no)
156 ;;
157 *)
158 AC_MSG_ERROR([bad value $enableval for --enable-gdbmi]) ;;
159 esac],
160 [enable_gdbmi=yes])
161 if test x"$enable_gdbmi" = xyes; then
162 if test -d $srcdir/mi; then
163 CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_MI_OBS)"
164 CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_MI_DEPS)"
165 CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_MI_SRCS)"
166 ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_MI_CFLAGS)"
167 fi
168 fi
169
170 # Enable TUI.
171 AC_ARG_ENABLE(tui,
172 [ --enable-tui enable full-screen terminal user interface (TUI)],
173 [case $enableval in
174 yes | no)
175 ;;
176 *)
177 AC_MSG_ERROR([bad value $enableval for --enable-tui]) ;;
178 esac],enable_tui=yes)
179
180 # Enable gdbtk.
181 AC_ARG_ENABLE(gdbtk,
182 [ --enable-gdbtk enable gdbtk graphical user interface (GUI)],
183 [case $enableval in
184 yes | no)
185 ;;
186 *)
187 AC_MSG_ERROR([bad value $enableval for --enable-gdbtk]) ;;
188 esac],
189 [if test -d $srcdir/gdbtk -a -d $srcdir/../itcl; then
190 enable_gdbtk=yes
191 else
192 enable_gdbtk=no
193 fi])
194 # We unconditionally disable gdbtk tests on selected platforms.
195 case $host_os in
196 go32* | windows*)
197 AC_MSG_WARN([gdbtk isn't supported on $host; disabling])
198 enable_gdbtk=no ;;
199 esac
200
201 # Libunwind support.
202 AC_ARG_WITH(libunwind,
203 [ --with-libunwind Use libunwind frame unwinding support],
204 [case "${withval}" in
205 yes) enable_libunwind=yes ;;
206 no) enable_libunwind=no ;;
207 *) AC_MSG_ERROR(bad value ${withval} for GDB with-libunwind option) ;;
208 esac],[
209 AC_CHECK_HEADERS(libunwind.h)
210 AC_CHECK_HEADERS(libunwind-ia64.h)
211 if test x"$ac_cv_header_libunwind_h" = xyes -a x"$ac_cv_header_libunwind_ia64_h" = xyes; then
212 enable_libunwind=yes;
213 fi
214 ])
215
216 if test x"$enable_libunwind" = xyes; then
217 AC_CHECK_HEADERS(libunwind.h)
218 AC_CHECK_HEADERS(libunwind-ia64.h)
219 AC_DEFINE(HAVE_LIBUNWIND, 1, [Define if libunwind library is being used.])
220 CONFIG_OBS="$CONFIG_OBS libunwind-frame.o"
221 CONFIG_DEPS="$CONFIG_DEPS libunwind-frame.o"
222 CONFIG_SRCS="$CONFIG_SRCS libunwind-frame.c"
223 fi
224
225 # Profiling support.
226 AC_ARG_ENABLE(profiling,
227 [ --enable-profiling enable profiling of GDB],
228 [case $enableval in
229 yes | no)
230 ;;
231 *)
232 AC_MSG_ERROR([bad value $enableval for --enable-profile]) ;;
233 esac],
234 [enable_profiling=no])
235
236 AC_CHECK_FUNCS(monstartup _mcleanup)
237 AC_CACHE_CHECK([for _etext], ac_cv_var__etext,
238 [AC_TRY_LINK(
239 [#include <stdlib.h>
240 extern char _etext;
241 ],
242 [free (&_etext);], ac_cv_var__etext=yes, ac_cv_var__etext=no)])
243 if test $ac_cv_var__etext = yes; then
244 AC_DEFINE(HAVE__ETEXT, 1,
245 [Define to 1 if your system has the _etext variable. ])
246 fi
247 if test "$enable_profiling" = yes ; then
248 if test $ac_cv_func_monstartup = no || test $ac_cv_func__mcleanup = no; then
249 AC_MSG_ERROR(--enable-profiling requires monstartup and _mcleanup)
250 fi
251 PROFILE_CFLAGS=-pg
252 OLD_CFLAGS="$CFLAGS"
253 CFLAGS="$CFLAGS $PROFILE_CFLAGS"
254
255 AC_CACHE_CHECK([whether $CC supports -pg], ac_cv_cc_supports_pg,
256 [AC_TRY_COMPILE([], [int x;], ac_cv_cc_supports_pg=yes,
257 ac_cv_cc_supports_pg=no)])
258
259 if test $ac_cv_cc_supports_pg = no; then
260 AC_MSG_ERROR(--enable-profiling requires a compiler which supports -pg)
261 fi
262
263 CFLAGS="$OLD_CFLAGS"
264 fi
265
266 # --------------------- #
267 # Checks for programs. #
268 # --------------------- #
269
270 AC_PROG_AWK
271 AC_PROG_INSTALL
272 AC_PROG_LN_S
273 AC_PROG_RANLIB
274 AC_PROG_YACC
275
276 AC_CHECK_TOOL(AR, ar)
277 AC_CHECK_TOOL(DLLTOOL, dlltool)
278 AC_CHECK_TOOL(WINDRES, windres)
279
280 # Needed for GNU/Hurd.
281 AC_CHECK_TOOL(MIG, mig)
282
283 # ---------------------- #
284 # Checks for libraries. #
285 # ---------------------- #
286
287 # We might need to link with -lm; most simulators need it.
288 AC_CHECK_LIB(m, main)
289
290 # We need to link with -lw to get `wctype' on Solaris before Solaris
291 # 2.6. Solaris 2.6 and beyond have this function in libc, and have a
292 # libw that some versions of the GNU linker cannot hanle (GNU ld 2.9.1
293 # is known to have this problem). Therefore we avoid libw if we can.
294 AC_CHECK_FUNC(wctype, [],
295 [AC_CHECK_LIB(w, wctype)])
296
297 # Some systems (e.g. Solaris) have `gethostbyname' in libnsl.
298 AC_SEARCH_LIBS(gethostbyname, nsl)
299
300 # Some systems (e.g. Solaris) have `socketpair' in libsocket.
301 AC_SEARCH_LIBS(socketpair, socket)
302
303 # For the TUI, we need enhanced curses functionality.
304 #
305 # FIXME: kettenis/20040905: We prefer ncurses over the vendor-supplied
306 # curses library because the latter might not provide all the
307 # functionality we need. However, this leads to problems on systems
308 # where the linker searches /usr/local/lib, but the compiler doesn't
309 # search /usr/local/include, if ncurses is installed in /usr/local. A
310 # default installation of ncurses on alpha*-dec-osf* will lead to such
311 # a situation.
312 AC_SEARCH_LIBS(waddstr, [ncurses cursesX curses])
313
314 # Since GDB uses Readline, we need termcap functionality. In many
315 # cases this will be provided by the curses library, but some systems
316 # have a seperate termcap library, or no curses library at all.
317
318 case $host_os in
319 cygwin*)
320 if test -d $srcdir/libtermcap; then
321 LIBS="../libtermcap/libtermcap.a $LIBS"
322 ac_cv_search_tgetent="../libtermcap/libtermcap.a"
323 fi ;;
324 go32* | *djgpp*)
325 ac_cv_search_tgetent="none required"
326 ;;
327 *mingw32*)
328 ac_cv_search_tgetent="none required"
329 CONFIG_OBS="$CONFIG_OBS win32-termcap.o"
330 ;;
331 esac
332
333 # These are the libraries checked by Readline.
334 AC_SEARCH_LIBS(tgetent, [termcap tinfo curses ncurses])
335
336 if test "$ac_cv_search_tgetent" = no; then
337 AC_MSG_ERROR([no termcap library found])
338 fi
339
340 AC_LIB_HAVE_LINKFLAGS([expat], [], [#include "expat.h"],
341 [XML_Parser p = XML_ParserCreate (0);])
342 if test "$HAVE_LIBEXPAT" != yes; then
343 AC_MSG_WARN([expat is missing or unusable; some features may be disabled.])
344 else
345 save_LIBS=$LIBS
346 LIBS="$LIBS $LIBEXPAT"
347 AC_CHECK_FUNCS(XML_StopParser)
348 LIBS=$save_LIBS
349 fi
350
351 # ------------------------- #
352 # Checks for header files. #
353 # ------------------------- #
354
355 AC_HEADER_DIRENT
356 AC_HEADER_STAT
357 AC_HEADER_STDC
358 AC_CHECK_HEADERS(nlist.h)
359 AC_CHECK_HEADERS(link.h, [], [],
360 [#if HAVE_SYS_TYPES_H
361 # include <sys/types.h>
362 #endif
363 #if HAVE_NLIST_H
364 # include <nlist.h>
365 #endif
366 ])
367 AC_CHECK_HEADERS(machine/reg.h)
368 AC_CHECK_HEADERS(poll.h sys/poll.h)
369 AC_CHECK_HEADERS(proc_service.h thread_db.h gnu/libc-version.h)
370 AC_CHECK_HEADERS(signal.h)
371 AC_CHECK_HEADERS(stddef.h)
372 AC_CHECK_HEADERS(stdlib.h)
373 AC_CHECK_HEADERS(stdint.h)
374 AC_CHECK_HEADERS(string.h memory.h strings.h)
375 AC_CHECK_HEADERS(sys/fault.h)
376 AC_CHECK_HEADERS(sys/file.h)
377 AC_CHECK_HEADERS(sys/filio.h)
378 AC_CHECK_HEADERS(sys/ioctl.h)
379 AC_CHECK_HEADERS(sys/param.h)
380 AC_CHECK_HEADERS(sys/resource.h)
381 AC_CHECK_HEADERS(sys/proc.h, [], [],
382 [#if HAVE_SYS_PARAM_H
383 # include <sys/param.h>
384 #endif
385 ])
386 AC_CHECK_HEADERS(sys/procfs.h)
387 AC_CHECK_HEADERS(sys/ptrace.h ptrace.h)
388 AC_CHECK_HEADERS(sys/reg.h sys/debugreg.h)
389 AC_CHECK_HEADERS(sys/select.h)
390 AC_CHECK_HEADERS(sys/syscall.h)
391 AC_CHECK_HEADERS(sys/types.h)
392 AC_CHECK_HEADERS(sys/user.h, [], [],
393 [#if HAVE_SYS_PARAM_H
394 # include <sys/param.h>
395 #endif
396 ])
397 AC_CHECK_HEADERS(sys/wait.h wait.h)
398 AC_CHECK_HEADERS(termios.h termio.h sgtty.h)
399 AC_CHECK_HEADERS(unistd.h)
400
401 # On Solaris 2.[789], we need to define _MSE_INT_H to avoid a clash
402 # between <widec.h> and <wchar.h> that would cause AC_CHECK_HEADERS to
403 # think that we don't have <curses.h> if we're using GCC.
404 case $host_os in
405 solaris2.[[789]])
406 if test "$GCC" = yes; then
407 AC_DEFINE(_MSE_INT_H, 1,
408 [Define to 1 to avoid a clash between <widec.h> and <wchar.h> on
409 Solaris 2.[789] when using GCC. ])
410 fi ;;
411 esac
412 AC_CHECK_HEADERS(curses.h cursesX.h ncurses.h ncurses/ncurses.h)
413 AC_CHECK_HEADERS(ncurses/term.h)
414 AC_CHECK_HEADERS(term.h, [], [],
415 [#if HAVE_CURSES_H
416 # include <curses.h>
417 #endif
418 ])
419
420 # FIXME: kettenis/20030102: In most cases we include these
421 # unconditionally, so what's the point in checking these?
422 AC_CHECK_HEADERS(ctype.h time.h)
423
424 # Create a header we can use portably to get the standard integer types.
425 GCC_HEADER_STDINT(gdb_stdint.h)
426
427 # ------------------------- #
428 # Checks for declarations. #
429 # ------------------------- #
430
431 AC_CHECK_DECLS([free, malloc, realloc])
432 AC_CHECK_DECLS([strerror, strstr])
433 AC_CHECK_DECLS([getopt, snprintf, vsnprintf])
434
435 # ----------------------- #
436 # Checks for structures. #
437 # ----------------------- #
438
439 AC_CHECK_MEMBERS([struct stat.st_blocks])
440 AC_CHECK_MEMBERS([struct stat.st_blksize])
441
442 # ------------------ #
443 # Checks for types. #
444 # ------------------ #
445
446 AC_TYPE_SIGNAL
447 AC_CHECK_TYPES(socklen_t, [], [],
448 [#include <sys/types.h>
449 #include <sys/socket.h>
450 ])
451 AC_CHECK_TYPES(uintptr_t, [], [], [#include <stdint.h>])
452
453 # ------------------------------------- #
454 # Checks for compiler characteristics. #
455 # ------------------------------------- #
456
457 AC_C_CONST
458 AC_C_INLINE
459
460 # ------------------------------ #
461 # Checks for library functions. #
462 # ------------------------------ #
463
464 AC_FUNC_ALLOCA
465 AC_FUNC_MMAP
466 AC_FUNC_VFORK
467 AC_CHECK_FUNCS(canonicalize_file_name realpath)
468 AC_CHECK_FUNCS(getrusage)
469 AC_CHECK_FUNCS(getuid getgid)
470 AC_CHECK_FUNCS(poll)
471 AC_CHECK_FUNCS(pread64)
472 AC_CHECK_FUNCS(sbrk)
473 AC_CHECK_FUNCS(setpgid setpgrp)
474 AC_CHECK_FUNCS(sigaction sigprocmask sigsetmask)
475 AC_CHECK_FUNCS(socketpair)
476 AC_CHECK_FUNCS(syscall)
477 AC_CHECK_FUNCS(ttrace)
478 AC_CHECK_FUNCS(wborder)
479
480 # Check the return and argument types of ptrace. No canned test for
481 # this, so roll our own.
482 gdb_ptrace_headers='
483 #if HAVE_SYS_TYPES_H
484 # include <sys/types.h>
485 #endif
486 #if HAVE_SYS_PTRACE_H
487 # include <sys/ptrace.h>
488 #endif
489 #if HAVE_UNISTD_H
490 # include <unistd.h>
491 #endif
492 '
493 # There is no point in checking if we don't have a prototype.
494 AC_CHECK_DECLS(ptrace, [], [
495 : ${gdb_cv_func_ptrace_ret='int'}
496 : ${gdb_cv_func_ptrace_args='int,int,long,long'}
497 ], $gdb_ptrace_headers)
498 # Check return type.
499 AC_CACHE_CHECK([return type of ptrace], gdb_cv_func_ptrace_ret,
500 AC_TRY_COMPILE($gdb_ptrace_headers,
501 [extern int ptrace ();],
502 gdb_cv_func_ptrace_ret='int',
503 gdb_cv_func_ptrace_ret='long'))
504 AC_DEFINE_UNQUOTED(PTRACE_TYPE_RET, $gdb_cv_func_ptrace_ret,
505 [Define as the return type of ptrace.])
506 # Check argument types.
507 AC_CACHE_CHECK([types of arguments for ptrace], gdb_cv_func_ptrace_args, [
508 for gdb_arg1 in 'int' 'long'; do
509 for gdb_arg2 in 'pid_t' 'int' 'long'; do
510 for gdb_arg3 in 'int *' 'caddr_t' 'int' 'long'; do
511 for gdb_arg4 in 'int' 'long'; do
512 AC_TRY_COMPILE($gdb_ptrace_headers, [
513 extern $gdb_cv_func_ptrace_ret
514 ptrace ($gdb_arg1, $gdb_arg2, $gdb_arg3, $gdb_arg4);
515 ], [gdb_cv_func_ptrace_args="$gdb_arg1,$gdb_arg2,$gdb_arg3,$gdb_arg4";
516 break 4;])
517 for gdb_arg5 in 'int *' 'int' 'long'; do
518 AC_TRY_COMPILE($gdb_ptrace_headers, [
519 extern $gdb_cv_func_ptrace_ret
520 ptrace ($gdb_arg1, $gdb_arg2, $gdb_arg3, $gdb_arg4, $gdb_arg5);
521 ], [
522 gdb_cv_func_ptrace_args="$gdb_arg1,$gdb_arg2,$gdb_arg3,$gdb_arg4,$gdb_arg5";
523 break 5;])
524 done
525 done
526 done
527 done
528 done
529 # Provide a safe default value.
530 : ${gdb_cv_func_ptrace_args='int,int,long,long'}
531 ])
532 ac_save_IFS=$IFS; IFS=','
533 set dummy `echo "$gdb_cv_func_ptrace_args" | sed 's/\*/\*/g'`
534 IFS=$ac_save_IFS
535 shift
536 AC_DEFINE_UNQUOTED(PTRACE_TYPE_ARG3, $[3],
537 [Define to the type of arg 3 for ptrace.])
538 if test -n "$[5]"; then
539 AC_DEFINE_UNQUOTED(PTRACE_TYPE_ARG5, $[5],
540 [Define to the type of arg 5 for ptrace.])
541 fi
542
543 dnl AC_FUNC_SETPGRP does not work when cross compiling
544 dnl Instead, assume we will have a prototype for setpgrp if cross compiling.
545 if test "$cross_compiling" = no; then
546 AC_FUNC_SETPGRP
547 else
548 AC_CACHE_CHECK([whether setpgrp takes no argument], ac_cv_func_setpgrp_void,
549 [AC_TRY_COMPILE([
550 #include <unistd.h>
551 ], [
552 if (setpgrp(1,1) == -1)
553 exit (0);
554 else
555 exit (1);
556 ], ac_cv_func_setpgrp_void=no, ac_cv_func_setpgrp_void=yes)])
557 if test $ac_cv_func_setpgrp_void = yes; then
558 AC_DEFINE(SETPGRP_VOID, 1)
559 fi
560 fi
561
562 # Check if sigsetjmp is available. Using AC_CHECK_FUNCS won't do
563 # since sigsetjmp might only be defined as a macro.
564 AC_CACHE_CHECK([for sigsetjmp], gdb_cv_func_sigsetjmp,
565 [AC_TRY_COMPILE([
566 #include <setjmp.h>
567 ], [sigjmp_buf env; while (! sigsetjmp (env, 1)) siglongjmp (env, 1);],
568 gdb_cv_func_sigsetjmp=yes, gdb_cv_func_sigsetjmp=no)])
569 if test $gdb_cv_func_sigsetjmp = yes; then
570 AC_DEFINE(HAVE_SIGSETJMP, 1, [Define if sigsetjmp is available. ])
571 fi
572
573 # Assume we'll default to using the included libiberty regex.
574 gdb_use_included_regex=yes
575
576 # However, if the system regex is GNU regex, then default to *not*
577 # using the included regex.
578 AC_CACHE_CHECK(
579 [for GNU regex],
580 [gdb_cv_have_gnu_regex],
581 [AC_TRY_COMPILE(
582 [#include <gnu-versions.h>],
583 [#define REGEX_INTERFACE_VERSION 1
584 #if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
585 # error "Version mismatch"
586 #endif],
587 gdb_cv_have_gnu_regex=yes,
588 gdb_cv_have_gnu_regex=no)])
589 if test $gdb_cv_have_gnu_regex = yes; then
590 gdb_use_included_regex=no
591 fi
592
593 AC_ARG_WITH(included-regex,
594 [ --without-included-regex don't use included regex; this is the default
595 on systems with version 2 of the GNU C library
596 (use with caution on other system)],
597 gdb_with_regex=$withval,
598 gdb_with_regex=$gdb_use_included_regex)
599 if test "$gdb_with_regex" = yes; then
600 AC_DEFINE(USE_INCLUDED_REGEX, 1,
601 [Define to 1 if the regex included in libiberty should be used.])
602 fi
603
604 # Check if <sys/proc.h> defines `struct thread' with a td_pcb member.
605 AC_CHECK_MEMBERS([struct thread.td_pcb], [], [],
606 [#include <sys/param.h>
607 #include <sys/proc.h>
608 ])
609
610 # See if <sys/lwp.h> defines `struct lwp`.
611 AC_CACHE_CHECK([for struct lwp], gdb_cv_struct_lwp,
612 [AC_TRY_COMPILE([#include <sys/param.h>
613 #include <sys/lwp.h>], [struct lwp l;],
614 gdb_cv_struct_lwp=yes, gdb_cv_struct_lwp=no)])
615 if test $gdb_cv_struct_lwp = yes; then
616 AC_DEFINE(HAVE_STRUCT_LWP, 1,
617 [Define to 1 if your system has struct lwp.])
618 fi
619
620 # See if <machine/reg.h> degines `struct reg'.
621 AC_CACHE_CHECK([for struct reg in machine/reg.h], gdb_cv_struct_reg,
622 [AC_TRY_COMPILE([#include <sys/types.h>
623 #include <machine/reg.h>], [struct reg r;],
624 gdb_cv_struct_reg=yes, gdb_cv_struct_reg=no)])
625 if test $gdb_cv_struct_reg = yes; then
626 AC_DEFINE(HAVE_STRUCT_REG, 1,
627 [Define to 1 if your system has struct reg in <machine/reg.h>.])
628 fi
629
630 # See if <machine/reg.h> supports the %fs and %gs i386 segment registers.
631 # Older i386 BSD's don't have the r_fs and r_gs members of `struct reg'.
632 AC_CHECK_MEMBERS([struct reg.r_fs, struct reg.r_gs], [], [],
633 [#include <machine/reg.h>])
634
635 # See if <sys/ptrace.h> provides the PTRACE_GETREGS request.
636 AC_MSG_CHECKING(for PTRACE_GETREGS)
637 AC_CACHE_VAL(gdb_cv_have_ptrace_getregs,
638 [AC_TRY_COMPILE([#include <sys/ptrace.h>],
639 [PTRACE_GETREGS;],
640 [gdb_cv_have_ptrace_getregs=yes],
641 [gdb_cv_have_ptrace_getregs=no])])
642 AC_MSG_RESULT($gdb_cv_have_ptrace_getregs)
643 if test $gdb_cv_have_ptrace_getregs = yes; then
644 AC_DEFINE(HAVE_PTRACE_GETREGS, 1,
645 [Define if sys/ptrace.h defines the PTRACE_GETREGS request.])
646 fi
647
648 # See if <sys/ptrace.h> provides the PTRACE_GETFPXREGS request.
649 AC_MSG_CHECKING(for PTRACE_GETFPXREGS)
650 AC_CACHE_VAL(gdb_cv_have_ptrace_getfpxregs,
651 [AC_TRY_COMPILE([#include <sys/ptrace.h>],
652 [PTRACE_GETFPXREGS;],
653 [gdb_cv_have_ptrace_getfpxregs=yes],
654 [gdb_cv_have_ptrace_getfpxregs=no])])
655 AC_MSG_RESULT($gdb_cv_have_ptrace_getfpxregs)
656 if test $gdb_cv_have_ptrace_getfpxregs = yes; then
657 AC_DEFINE(HAVE_PTRACE_GETFPXREGS, 1,
658 [Define if sys/ptrace.h defines the PTRACE_GETFPXREGS request.])
659 fi
660
661 # See if <sys/ptrace.h> provides the PT_GETDBREGS request.
662 AC_MSG_CHECKING(for PT_GETDBREGS)
663 AC_CACHE_VAL(gdb_cv_have_pt_getdbregs,
664 [AC_TRY_COMPILE([#include <sys/types.h>
665 #include <sys/ptrace.h>],
666 [PT_GETDBREGS;],
667 [gdb_cv_have_pt_getdbregs=yes],
668 [gdb_cv_have_pt_getdbregs=no])])
669 AC_MSG_RESULT($gdb_cv_have_pt_getdbregs)
670 if test $gdb_cv_have_pt_getdbregs = yes; then
671 AC_DEFINE(HAVE_PT_GETDBREGS, 1,
672 [Define if sys/ptrace.h defines the PT_GETDBREGS request.])
673 fi
674
675 # See if <sys/ptrace.h> provides the PT_GETXMMREGS request.
676 AC_MSG_CHECKING(for PT_GETXMMREGS)
677 AC_CACHE_VAL(gdb_cv_have_pt_getxmmregs,
678 [AC_TRY_COMPILE([#include <sys/types.h>
679 #include <sys/ptrace.h>],
680 [PT_GETXMMREGS;],
681 [gdb_cv_have_pt_getxmmregs=yes],
682 [gdb_cv_have_pt_getxmmregs=no])])
683 AC_MSG_RESULT($gdb_cv_have_pt_getxmmregs)
684 if test $gdb_cv_have_pt_getxmmregs = yes; then
685 AC_DEFINE(HAVE_PT_GETXMMREGS, 1,
686 [Define if sys/ptrace.h defines the PT_GETXMMREGS request.])
687 fi
688
689 # Detect which type of /proc is in use, such as for Unixware or Solaris.
690
691 if test "${target}" = "${host}"; then
692 case "${host}" in
693 *-*-unixware* | *-*-sysv4.2* | *-*-sysv5* | *-*-interix* )
694 AC_DEFINE(NEW_PROC_API, 1,
695 [Define if you want to use new multi-fd /proc interface
696 (replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
697 ;;
698 *-*-solaris2.[[6789]] | *-*-solaris2.1[[0-9]])
699 AC_DEFINE(NEW_PROC_API, 1,
700 [Define if you want to use new multi-fd /proc interface
701 (replaces HAVE_MULTIPLE_PROC_FDS as well as other macros).])
702 ;;
703 mips-sgi-irix5*)
704 # Work around <sys/proc.h> needing _KMEMUSER problem on IRIX 5.
705 AC_DEFINE([_KMEMUSER], 1,
706 [Define to 1 so <sys/proc.h> gets a definition of anon_hdl. Works
707 around a <sys/proc.h> problem on IRIX 5.])
708 ;;
709 esac
710 fi
711
712 if test "$ac_cv_header_sys_procfs_h" = yes; then
713 BFD_HAVE_SYS_PROCFS_TYPE(pstatus_t)
714 BFD_HAVE_SYS_PROCFS_TYPE(prrun_t)
715 BFD_HAVE_SYS_PROCFS_TYPE(gregset_t)
716 BFD_HAVE_SYS_PROCFS_TYPE(fpregset_t)
717 BFD_HAVE_SYS_PROCFS_TYPE(prgregset_t)
718 BFD_HAVE_SYS_PROCFS_TYPE(prfpregset_t)
719 BFD_HAVE_SYS_PROCFS_TYPE(prgregset32_t)
720 BFD_HAVE_SYS_PROCFS_TYPE(prfpregset32_t)
721 BFD_HAVE_SYS_PROCFS_TYPE(lwpid_t)
722 BFD_HAVE_SYS_PROCFS_TYPE(psaddr_t)
723 BFD_HAVE_SYS_PROCFS_TYPE(prsysent_t)
724 BFD_HAVE_SYS_PROCFS_TYPE(pr_sigset_t)
725 BFD_HAVE_SYS_PROCFS_TYPE(pr_sigaction64_t)
726 BFD_HAVE_SYS_PROCFS_TYPE(pr_siginfo64_t)
727
728
729 dnl Check for broken prfpregset_t type
730
731 dnl For Linux/i386, glibc 2.1.3 was released with a bogus
732 dnl prfpregset_t type (it's a typedef for the pointer to a struct
733 dnl instead of the struct itself). We detect this here, and work
734 dnl around it in gdb_proc_service.h.
735
736 if test $bfd_cv_have_sys_procfs_type_prfpregset_t = yes; then
737 AC_MSG_CHECKING(whether prfpregset_t type is broken)
738 AC_CACHE_VAL(gdb_cv_prfpregset_t_broken,
739 [AC_TRY_RUN([#include <sys/procfs.h>
740 int main ()
741 {
742 if (sizeof (prfpregset_t) == sizeof (void *))
743 return 1;
744 return 0;
745 }],
746 gdb_cv_prfpregset_t_broken=no,
747 gdb_cv_prfpregset_t_broken=yes,
748 gdb_cv_prfpregset_t_broken=yes)])
749 AC_MSG_RESULT($gdb_cv_prfpregset_t_broken)
750 if test $gdb_cv_prfpregset_t_broken = yes; then
751 AC_DEFINE(PRFPREGSET_T_BROKEN, 1,
752 [Define if the prfpregset_t type is broken.])
753 fi
754 fi
755
756 dnl Check for PIOCSET ioctl entry
757
758 AC_MSG_CHECKING(for PIOCSET ioctl entry in sys/procfs.h)
759 AC_CACHE_VAL(gdb_cv_have_procfs_piocset,
760 [AC_TRY_COMPILE([#include <unistd.h>
761 #include <sys/types.h>
762 #include <sys/procfs.h>
763 ], [
764 int dummy;;
765 dummy = ioctl(0, PIOCSET, &dummy);
766 ],
767 gdb_cv_have_procfs_piocset=yes, gdb_cv_have_procfs_piocset=no)])
768 AC_MSG_RESULT($gdb_cv_have_procfs_piocset)
769 if test $gdb_cv_have_procfs_piocset = yes; then
770 AC_DEFINE(HAVE_PROCFS_PIOCSET, 1,
771 [Define if ioctl argument PIOCSET is available.])
772 fi
773 fi
774
775 dnl For native ports (host == target), check to see what kind of
776 dnl legacy link.h support is needed. (See solib-legacy.c.)
777 if test ${host} = ${target} ; then
778 dnl Check for struct link_map with l_ members which are indicative
779 dnl of SVR4-like shared libraries
780
781 AC_MSG_CHECKING(for member l_addr in struct link_map)
782 AC_CACHE_VAL(gdb_cv_have_struct_link_map_with_l_members,
783 [AC_TRY_COMPILE([#include <link.h>],
784 [struct link_map lm; (void) lm.l_addr;],
785 gdb_cv_have_struct_link_map_with_l_members=yes,
786 gdb_cv_have_struct_link_map_with_l_members=no)])
787 AC_MSG_RESULT($gdb_cv_have_struct_link_map_with_l_members)
788 if test $gdb_cv_have_struct_link_map_with_l_members = yes; then
789 AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_L_MEMBERS,1,
790 [Define if <link.h> exists and defines struct link_map which has
791 members with an ``l_'' prefix. (For Solaris, SVR4, and
792 SVR4-like systems.)])
793 fi
794
795 dnl Check for struct link_map with lm_ members which are indicative
796 dnl of SunOS-like shared libraries
797
798 AC_MSG_CHECKING(for member lm_addr in struct link_map)
799 AC_CACHE_VAL(gdb_cv_have_struct_link_map_with_lm_members,
800 [AC_TRY_COMPILE([#include <sys/types.h>
801 #include <link.h>],
802 [struct link_map lm; (void) lm.lm_addr;],
803 gdb_cv_have_struct_link_map_with_lm_members=yes,
804 gdb_cv_have_struct_link_map_with_lm_members=no)])
805 AC_MSG_RESULT($gdb_cv_have_struct_link_map_with_lm_members)
806 if test $gdb_cv_have_struct_link_map_with_lm_members = yes; then
807 AC_DEFINE(HAVE_STRUCT_LINK_MAP_WITH_LM_MEMBERS, 1,
808 [Define if <link.h> exists and defines struct link_map which has
809 members with an ``lm_'' prefix. (For SunOS.)])
810 fi
811
812 dnl Check for struct so_map with som_ members which are found on
813 dnl some *BSD systems.
814
815 AC_MSG_CHECKING(for member som_addr in struct so_map)
816 AC_CACHE_VAL(gdb_cv_have_struct_so_map_with_som_members,
817 [AC_TRY_COMPILE([#include <sys/types.h>
818 #ifdef HAVE_NLIST_H
819 #include <nlist.h>
820 #endif
821 #include <link.h>],
822 [struct so_map lm; (void) lm.som_addr;],
823 gdb_cv_have_struct_so_map_with_som_members=yes,
824 gdb_cv_have_struct_so_map_with_som_members=no)])
825 AC_MSG_RESULT($gdb_cv_have_struct_so_map_with_som_members)
826 if test $gdb_cv_have_struct_so_map_with_som_members = yes; then
827 AC_DEFINE(HAVE_STRUCT_SO_MAP_WITH_SOM_MEMBERS, 1,
828 [Define if <link.h> exists and defines a struct so_map which has
829 members with an ``som_'' prefix. (Found on older *BSD systems.)])
830 fi
831
832 dnl Check for struct link_map32 type, which allows a 64-bit Solaris
833 dnl debugger to debug a 32-bit Solaris app with 32-bit shared libraries.
834
835 AC_MSG_CHECKING(for struct link_map32 in sys/link.h)
836 AC_CACHE_VAL(gdb_cv_have_struct_link_map32,
837 [AC_TRY_COMPILE([#define _SYSCALL32
838 #include <sys/link.h>], [struct link_map32 l;],
839 gdb_cv_have_struct_link_map32=yes,
840 gdb_cv_have_struct_link_map32=no)])
841 AC_MSG_RESULT($gdb_cv_have_struct_link_map32)
842 if test $gdb_cv_have_struct_link_map32 = yes; then
843 AC_DEFINE(HAVE_STRUCT_LINK_MAP32, 1,
844 [Define if <sys/link.h> has struct link_map32])
845 AC_DEFINE(_SYSCALL32, 1,
846 [Define if <sys/link.h> has link_map32 (solaris sparc-64 target)])
847 fi
848 fi
849
850 # Check if the compiler supports the `long long' type.
851
852 AC_CACHE_CHECK([for long long support in compiler], gdb_cv_c_long_long,
853 [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
854 [[extern long long foo;]],
855 [[switch (foo & 2) { case 0: return 1; }]])],
856 gdb_cv_c_long_long=yes,
857 gdb_cv_c_long_long=no)])
858 if test $gdb_cv_c_long_long = yes; then
859 AC_DEFINE(CC_HAS_LONG_LONG, 1,
860 [Define to 1 if the compiler supports long long.])
861 fi
862
863 # Check if the compiler and runtime support printing long longs.
864
865 AC_CACHE_CHECK([for long long support in printf],
866 gdb_cv_printf_has_long_long,
867 [AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
868 [[char buf[32];
869 long long l = 0;
870 l = (l << 16) + 0x0123;
871 l = (l << 16) + 0x4567;
872 l = (l << 16) + 0x89ab;
873 l = (l << 16) + 0xcdef;
874 sprintf (buf, "0x%016llx", l);
875 return (strcmp ("0x0123456789abcdef", buf));]])],
876 gdb_cv_printf_has_long_long=yes,
877 gdb_cv_printf_has_long_long=no,
878 gdb_cv_printf_has_long_long=no)])
879 if test $gdb_cv_printf_has_long_long = yes; then
880 AC_DEFINE(PRINTF_HAS_LONG_LONG, 1,
881 [Define to 1 if the "%ll" format works to print long longs.])
882 fi
883
884 # Check if the compiler supports the `long double' type. We can't use
885 # AC_C_LONG_DOUBLE because that one does additional checks on the
886 # constants defined in <float.h> that fail on some systems,
887 # e.g. FreeBSD/i386 4.7 and OpenBSD/i386 3.6.
888
889 AC_CACHE_CHECK([for long double support in compiler], gdb_cv_c_long_double,
890 [AC_COMPILE_IFELSE([AC_LANG_SOURCE([[long double foo;]])],
891 gdb_cv_c_long_double=yes,
892 gdb_cv_c_long_double=no)])
893 if test $gdb_cv_c_long_double = yes; then
894 AC_DEFINE(HAVE_LONG_DOUBLE, 1,
895 [Define to 1 if the compiler supports long double.])
896 fi
897
898 # Check if the compiler and runtime support printing long doubles.
899
900 AC_CACHE_CHECK([for long double support in printf],
901 gdb_cv_printf_has_long_double,
902 [AC_RUN_IFELSE([AC_LANG_PROGRAM([AC_INCLUDES_DEFAULT],
903 [[char buf[16];
904 long double f = 3.141592653;
905 sprintf (buf, "%Lg", f);
906 return (strncmp ("3.14159", buf, 7));]])],
907 gdb_cv_printf_has_long_double=yes,
908 gdb_cv_printf_has_long_double=no,
909 gdb_cv_printf_has_long_double=no)])
910 if test $gdb_cv_printf_has_long_double = yes; then
911 AC_DEFINE(PRINTF_HAS_LONG_DOUBLE, 1,
912 [Define to 1 if the "%Lg" format works to print long doubles.])
913 fi
914
915 # Check if the compiler and runtime support scanning long doubles.
916
917 AC_CACHE_CHECK([for long double support in scanf],
918 gdb_cv_scanf_has_long_double,
919 [AC_RUN_IFELSE([AC_LANG_PROGRAM(
920 [[#include <stdio.h>]],
921 [[char *buf = "3.141592653";
922 long double f = 0;
923 sscanf (buf, "%Lg", &f);
924 return !(f > 3.14159 && f < 3.14160);]])],
925 gdb_cv_scanf_has_long_double=yes,
926 gdb_cv_scanf_has_long_double=no,
927 gdb_cv_scanf_has_long_double=no)])
928 if test $gdb_cv_scanf_has_long_double = yes; then
929 AC_DEFINE(SCANF_HAS_LONG_DOUBLE, 1,
930 [Define to 1 if the "%Lg" format works to scan long doubles.])
931 fi
932
933 case ${host_os} in
934 aix*)
935 AC_CACHE_CHECK([for -bbigtoc option], [gdb_cv_bigtoc], [
936 SAVE_LDFLAGS=$LDFLAGS
937
938 case $GCC in
939 yes) gdb_cv_bigtoc=-Wl,-bbigtoc ;;
940 *) gdb_cv_bigtoc=-bbigtoc ;;
941 esac
942
943 LDFLAGS=$LDFLAGS\ $gdb_cv_bigtoc
944 AC_TRY_LINK([], [int i;], [], [gdb_cv_bigtoc=])
945 LDFLAGS="${SAVE_LDFLAGS}"
946 ])
947 CONFIG_LDFLAGS="${CONFIG_LDFLAGS} ${gdb_cv_bigtoc}"
948 ;;
949 esac
950
951
952 dnl For certain native configurations, we need to check whether thread
953 dnl support can be built in or not.
954 dnl
955 dnl Note that we only want this if we are both native (host == target),
956 dnl and not doing a canadian cross build (build == host).
957
958 if test ${build} = ${host} -a ${host} = ${target} ; then
959 case ${host_os} in
960 hpux*)
961 AC_MSG_CHECKING(for HPUX/OSF thread support)
962 if test -f /usr/include/dce/cma_config.h ; then
963 if test "$GCC" = "yes" ; then
964 AC_MSG_RESULT(yes)
965 AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT, 1,
966 [Define if you have HPUX threads])
967 CONFIG_OBS="${CONFIG_OBS} hpux-thread.o"
968 CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
969 else
970 AC_MSG_RESULT(no (suppressed because you are not using GCC))
971 fi
972 else
973 AC_MSG_RESULT(no)
974 fi
975 ;;
976 solaris*)
977 # See if thread_db library is around for Solaris thread debugging.
978 # Note that we must explicitly test for version 1 of the library
979 # because version 0 (present on Solaris 2.4 or earlier) doesn't have
980 # the same API.
981 AC_MSG_CHECKING(for Solaris thread debugging library)
982 if test -f /usr/lib/libthread_db.so.1 ; then
983 AC_MSG_RESULT(yes)
984 AC_DEFINE(HAVE_THREAD_DB_LIB, 1,
985 [Define if using Solaris thread debugging.])
986 CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
987 CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
988 AC_CHECK_LIB(dl, dlopen)
989 if test "$GCC" = "yes" ; then
990 # The GNU linker requires the -export-dynamic option to make
991 # all symbols visible in the dynamic symbol table.
992 hold_ldflags=$LDFLAGS
993 AC_MSG_CHECKING(for the ld -export-dynamic flag)
994 LDFLAGS="${LDFLAGS} -Wl,-export-dynamic"
995 AC_TRY_LINK(, [int i;], found=yes, found=no)
996 LDFLAGS=$hold_ldflags
997 AC_MSG_RESULT($found)
998 if test $found = yes; then
999 CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -Wl,-export-dynamic"
1000 fi
1001 fi
1002 # Sun randomly tweaked the prototypes in <proc_service.h>
1003 # at one point.
1004 AC_MSG_CHECKING(if <proc_service.h> is old)
1005 AC_CACHE_VAL(gdb_cv_proc_service_is_old,[
1006 AC_TRY_COMPILE([
1007 #include <proc_service.h>
1008 ps_err_e ps_pdwrite
1009 (struct ps_prochandle*, psaddr_t, const void*, size_t);
1010 ],, gdb_cv_proc_service_is_old=no,
1011 gdb_cv_proc_service_is_old=yes)
1012 ])
1013 AC_MSG_RESULT($gdb_cv_proc_service_is_old)
1014 if test $gdb_cv_proc_service_is_old = yes; then
1015 AC_DEFINE(PROC_SERVICE_IS_OLD, 1,
1016 [Define if <proc_service.h> on solaris uses int instead of
1017 size_t, and assorted other type changes.])
1018 fi
1019 else
1020 AC_MSG_RESULT(no)
1021 fi
1022 ;;
1023 aix*)
1024 AC_MSG_CHECKING(for AiX thread debugging library)
1025 AC_CACHE_VAL(gdb_cv_have_aix_thread_debug,
1026 [AC_TRY_COMPILE([#include <sys/pthdebug.h>],
1027 [#ifndef PTHDB_VERSION_3
1028 #error
1029 #endif],
1030 gdb_cv_have_aix_thread_debug=yes,
1031 gdb_cv_have_aix_thread_debug=no)])
1032 AC_MSG_RESULT($gdb_cv_have_aix_thread_debug)
1033 if test $gdb_cv_have_aix_thread_debug = yes; then
1034 CONFIG_SRCS="${CONFIG_SRCS} aix-thread.c"
1035 CONFIG_OBS="${CONFIG_OBS} aix-thread.o"
1036 CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -lpthdebug"
1037 fi
1038 ;;
1039 esac
1040 AC_SUBST(CONFIG_LDFLAGS)
1041 fi
1042
1043 dnl See if we have a thread_db header file that has TD_NOTALLOC and
1044 dnl other error codes.
1045 if test "x$ac_cv_header_thread_db_h" = "xyes"; then
1046 AC_CACHE_CHECK([whether <thread_db.h> has TD_NOTALLOC],
1047 gdb_cv_thread_db_h_has_td_notalloc,
1048 AC_TRY_COMPILE(
1049 [#include <thread_db.h>],
1050 [int i = TD_NOTALLOC;],
1051 gdb_cv_thread_db_h_has_td_notalloc=yes,
1052 gdb_cv_thread_db_h_has_td_notalloc=no
1053 )
1054 )
1055 AC_CACHE_CHECK([whether <thread_db.h> has TD_VERSION],
1056 gdb_cv_thread_db_h_has_td_version,
1057 AC_TRY_COMPILE(
1058 [#include <thread_db.h>],
1059 [int i = TD_VERSION;],
1060 gdb_cv_thread_db_h_has_td_version=yes,
1061 gdb_cv_thread_db_h_has_td_version=no
1062 )
1063 )
1064 AC_CACHE_CHECK([whether <thread_db.h> has TD_NOTLS],
1065 gdb_cv_thread_db_h_has_td_notls,
1066 AC_TRY_COMPILE(
1067 [#include <thread_db.h>],
1068 [int i = TD_NOTLS;],
1069 gdb_cv_thread_db_h_has_td_notls=yes,
1070 gdb_cv_thread_db_h_has_td_notls=no
1071 )
1072 )
1073 fi
1074 if test "x$gdb_cv_thread_db_h_has_td_notalloc" = "xyes"; then
1075 AC_DEFINE(THREAD_DB_HAS_TD_NOTALLOC, 1,
1076 [Define if <thread_db.h> has the TD_NOTALLOC error code.])
1077 fi
1078 if test "x$gdb_cv_thread_db_h_has_td_version" = "xyes"; then
1079 AC_DEFINE(THREAD_DB_HAS_TD_VERSION, 1,
1080 [Define if <thread_db.h> has the TD_VERSION error code.])
1081 fi
1082 if test "x$gdb_cv_thread_db_h_has_td_notls" = "xyes"; then
1083 AC_DEFINE(THREAD_DB_HAS_TD_NOTLS, 1,
1084 [Define if <thread_db.h> has the TD_NOTLS error code.])
1085 fi
1086
1087 dnl See if we have a sys/syscall header file that has __NR_tkill.
1088 if test "x$ac_cv_header_sys_syscall_h" = "xyes"; then
1089 AC_CACHE_CHECK([whether <sys/syscall.h> has __NR_tkill],
1090 gdb_cv_sys_syscall_h_has_tkill,
1091 AC_TRY_COMPILE(
1092 [#include <sys/syscall.h>],
1093 [int i = __NR_tkill;],
1094 gdb_cv_sys_syscall_h_has_tkill=yes,
1095 gdb_cv_sys_syscall_h_has_tkill=no
1096 )
1097 )
1098 fi
1099 dnl See if we can issue tkill syscall.
1100 if test "x$gdb_cv_sys_syscall_h_has_tkill" = "xyes" && test "x$ac_cv_func_syscall" = "xyes"; then
1101 AC_DEFINE(HAVE_TKILL_SYSCALL, 1, [Define if you support the tkill syscall.])
1102 fi
1103
1104 dnl Handle optional features that can be enabled.
1105
1106 AC_ARG_WITH(sysroot,
1107 [ --with-sysroot[=DIR] Search for usr/lib et al within DIR.],
1108 [
1109 case ${with_sysroot} in
1110 yes) TARGET_SYSTEM_ROOT='${exec_prefix}/${target_alias}/sys-root' ;;
1111 *) TARGET_SYSTEM_ROOT=$with_sysroot ;;
1112 esac
1113
1114 TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"$(TARGET_SYSTEM_ROOT)\"'
1115
1116 if test "x$prefix" = xNONE; then
1117 test_prefix=/usr/local
1118 else
1119 test_prefix=$prefix
1120 fi
1121 if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
1122 test_exec_prefix=$test_prefix
1123 else
1124 test_exec_prefix=$exec_prefix
1125 fi
1126 case ${TARGET_SYSTEM_ROOT} in
1127 "${test_prefix}"|"${test_prefix}/"*|\
1128 "${test_exec_prefix}"|"${test_exec_prefix}/"*|\
1129 '${prefix}'|'${prefix}/'*|\
1130 '${exec_prefix}'|'${exec_prefix}/'*)
1131 t="$TARGET_SYSTEM_ROOT_DEFINE -DTARGET_SYSTEM_ROOT_RELOCATABLE"
1132 TARGET_SYSTEM_ROOT_DEFINE="$t"
1133 ;;
1134 esac
1135 ], [
1136 TARGET_SYSTEM_ROOT=
1137 TARGET_SYSTEM_ROOT_DEFINE='-DTARGET_SYSTEM_ROOT=\"\"'
1138 ])
1139 AC_SUBST(TARGET_SYSTEM_ROOT)
1140 AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
1141
1142 AC_ARG_ENABLE(werror,
1143 [ --enable-werror treat compile warnings as errors],
1144 [case "${enableval}" in
1145 yes | y) ERROR_ON_WARNING="yes" ;;
1146 no | n) ERROR_ON_WARNING="no" ;;
1147 *) AC_MSG_ERROR(bad value ${enableval} for --enable-werror) ;;
1148 esac])
1149
1150 # Enable -Werror by default when using gcc
1151 if test "${GCC}" = yes -a -z "${ERROR_ON_WARNING}" ; then
1152 ERROR_ON_WARNING=yes
1153 fi
1154
1155 WERROR_CFLAGS=""
1156 if test "${ERROR_ON_WARNING}" = yes ; then
1157 WERROR_CFLAGS="-Werror"
1158 fi
1159
1160 # The entries after -Wno-pointer-sign are disabled warnings which may
1161 # be enabled in the future, which can not currently be used to build
1162 # GDB.
1163 # NOTE: If you change this list, remember to update
1164 # gdb/doc/gdbint.texinfo.
1165 build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
1166 -Wformat-nonliteral -Wno-pointer-sign \
1167 -Wno-unused -Wno-switch -Wno-char-subscripts"
1168
1169 AC_ARG_ENABLE(build-warnings,
1170 [ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
1171 [case "${enableval}" in
1172 yes) ;;
1173 no) build_warnings="-w";;
1174 ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
1175 build_warnings="${build_warnings} ${t}";;
1176 *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
1177 build_warnings="${t} ${build_warnings}";;
1178 *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
1179 esac
1180 if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
1181 echo "Setting compiler warning flags = $build_warnings" 6>&1
1182 fi])dnl
1183 AC_ARG_ENABLE(gdb-build-warnings,
1184 [ --enable-gdb-build-warnings Enable GDB specific build-time compiler warnings if gcc is used],
1185 [case "${enableval}" in
1186 yes) ;;
1187 no) build_warnings="-w";;
1188 ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
1189 build_warnings="${build_warnings} ${t}";;
1190 *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
1191 build_warnings="${t} ${build_warnings}";;
1192 *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
1193 esac
1194 if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
1195 echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
1196 fi])dnl
1197 WARN_CFLAGS=""
1198 if test "x${build_warnings}" != x -a "x$GCC" = xyes
1199 then
1200 AC_MSG_CHECKING(compiler warning flags)
1201 # Separate out the -Werror flag as some files just cannot be
1202 # compiled with it enabled.
1203 for w in ${build_warnings}; do
1204 case $w in
1205 -Werr*) WERROR_CFLAGS=-Werror ;;
1206 *) # Check that GCC accepts it
1207 saved_CFLAGS="$CFLAGS"
1208 CFLAGS="$CFLAGS $w"
1209 AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
1210 CFLAGS="$saved_CFLAGS"
1211 esac
1212 done
1213 AC_MSG_RESULT(${WARN_CFLAGS} ${WERROR_CFLAGS})
1214 fi
1215 AC_SUBST(WARN_CFLAGS)
1216 AC_SUBST(WERROR_CFLAGS)
1217
1218 # In the Cygwin environment, we need some additional flags.
1219 AC_CACHE_CHECK([for cygwin], gdb_cv_os_cygwin,
1220 [AC_EGREP_CPP(lose, [
1221 #if defined (__CYGWIN__) || defined (__CYGWIN32__)
1222 lose
1223 #endif],[gdb_cv_os_cygwin=yes],[gdb_cv_os_cygwin=no])])
1224
1225
1226 dnl Figure out which of the many generic ser-*.c files the _host_ supports.
1227 SER_HARDWIRE="ser-base.o ser-unix.o ser-pipe.o ser-tcp.o"
1228 case ${host} in
1229 *go32* ) SER_HARDWIRE=ser-go32.o ;;
1230 *djgpp* ) SER_HARDWIRE=ser-go32.o ;;
1231 *mingw32*) SER_HARDWIRE="ser-base.o ser-tcp.o ser-mingw.o" ;;
1232 esac
1233 AC_SUBST(SER_HARDWIRE)
1234
1235 # libreadline needs libuser32.a in a cygwin environment
1236 WIN32LIBS=
1237 if test x$gdb_cv_os_cygwin = xyes; then
1238 WIN32LIBS="-luser32"
1239 case "${target}" in
1240 *cygwin*) WIN32LIBS="$WIN32LIBS -limagehlp"
1241 ;;
1242 esac
1243 fi
1244
1245 # The ser-tcp.c module requires sockets.
1246 case ${host} in
1247 *mingw32*)
1248 AC_DEFINE(USE_WIN32API, 1,
1249 [Define if we should use the Windows API, instead of the
1250 POSIX API. On Windows, we use the Windows API when
1251 building for MinGW, but the POSIX API when building
1252 for Cygwin.])
1253 WIN32LIBS="$WIN32LIBS -lws2_32"
1254 ;;
1255 esac
1256 AC_SUBST(WIN32LIBS)
1257
1258 # Add ELF support to GDB, but only if BFD includes ELF support.
1259 OLD_CFLAGS=$CFLAGS
1260 OLD_LDFLAGS=$LDFLAGS
1261 OLD_LIBS=$LIBS
1262 CFLAGS="$CFLAGS -I${srcdir}/../include -I../bfd -I${srcdir}/../bfd"
1263 LDFLAGS="$LDFLAGS -L../bfd -L../libiberty"
1264 LIBS="$LIBS -lbfd -liberty"
1265 AC_CACHE_CHECK([for ELF support in BFD], gdb_cv_var_elf,
1266 [AC_TRY_LINK(
1267 [#include <stdlib.h>
1268 #include "bfd.h"
1269 #include "elf-bfd.h"
1270 ],
1271 [bfd *abfd = NULL; bfd_get_elf_phdr_upper_bound (abfd); ],
1272 gdb_cv_var_elf=yes, gdb_cv_var_elf=no)])
1273 if test $gdb_cv_var_elf = yes; then
1274 CONFIG_OBS="$CONFIG_OBS elfread.o"
1275 AC_DEFINE(HAVE_ELF, 1,
1276 [Define if ELF support should be included.])
1277 fi
1278 CFLAGS=$OLD_CFLAGS
1279 LDFLAGS=$OLD_LDFLAGS
1280 LIBS=$OLD_LIBS
1281
1282 # Add any host-specific objects to GDB.
1283 CONFIG_OBS="${CONFIG_OBS} ${gdb_host_obs}"
1284
1285 LIBGUI="../libgui/src/libgui.a"
1286 GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
1287 AC_SUBST(LIBGUI)
1288 AC_SUBST(GUI_CFLAGS_X)
1289
1290 WIN32LDAPP=
1291 AC_SUBST(WIN32LIBS)
1292 AC_SUBST(WIN32LDAPP)
1293
1294 case "${host}" in
1295 *-*-cygwin*)
1296 configdir="win"
1297 ;;
1298 *)
1299 configdir="unix"
1300 ;;
1301 esac
1302
1303 GDBTKLIBS=
1304 if test "${enable_gdbtk}" = "yes"; then
1305
1306 # Gdbtk must have an absolute path to srcdir in order to run
1307 # properly when not installed.
1308 here=`pwd`
1309 cd ${srcdir}
1310 GDBTK_SRC_DIR=`pwd`
1311 cd $here
1312
1313 CY_AC_PATH_TCLCONFIG
1314 if test -z "${no_tcl}"; then
1315 CY_AC_LOAD_TCLCONFIG
1316 CY_AC_PATH_TKCONFIG
1317
1318 # now look for Tcl library stuff
1319
1320 tcldir="../tcl/${configdir}/"
1321
1322 TCL_DEPS="${tcldir}${TCL_LIB_FILE}"
1323
1324 # If $no_tk is nonempty, then we can't do Tk, and there is no
1325 # point to doing Tcl.
1326 if test -z "${no_tk}"; then
1327 CY_AC_LOAD_TKCONFIG
1328 CY_AC_PATH_TCLH
1329 CY_AC_PATH_TKH
1330 CY_AC_PATH_ITCLH
1331 CY_AC_PATH_ITKH
1332
1333
1334 # now look for Tk library stuff
1335
1336 tkdir="../tk/${configdir}/"
1337
1338 TK_DEPS="${tkdir}${TK_LIB_FILE}"
1339
1340 # now look for Itcl library stuff
1341
1342 CY_AC_PATH_ITCLCONFIG
1343 if test -z "${no_itcl}"; then
1344 CY_AC_LOAD_ITCLCONFIG
1345
1346 ITCLLIB="${ITCL_BUILD_LIB_SPEC}"
1347 ITCL_DEPS="${ITCL_LIB_FULL_PATH}"
1348 fi
1349
1350
1351 # now look for Itk library stuff
1352 CY_AC_PATH_ITKCONFIG
1353 if test -z "${no_itcl}"; then
1354 CY_AC_LOAD_ITKCONFIG
1355
1356 ITKLIB="${ITK_BUILD_LIB_SPEC}"
1357 ITK_DEPS="${ITK_LIB_FULL_PATH}"
1358 fi
1359
1360 ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)"
1361
1362 # Include some libraries that Tcl and Tk want.
1363 TCL_LIBS='$(LIBGUI) $(ITCL) $(ITK) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)'
1364 # Yes, the ordering seems wrong here. But it isn't.
1365 # TK_LIBS is the list of libraries that need to be linked
1366 # after Tcl/Tk. Note that this isn't put into LIBS. If it
1367 # were in LIBS then any link tests after this point would
1368 # try to include things like `$(LIBGUI)', which wouldn't work.
1369 GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}"
1370
1371 CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)"
1372 CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)"
1373 CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)"
1374 CONFIG_ALL="${CONFIG_ALL} all-gdbtk"
1375 CONFIG_CLEAN="${CONFIG_CLEAN} clean-gdbtk"
1376 CONFIG_INSTALL="${CONFIG_INSTALL} install-gdbtk"
1377 CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-gdbtk"
1378
1379 if test x$gdb_cv_os_cygwin = xyes; then
1380 WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32"
1381 WIN32LDAPP="-Wl,--subsystem,console"
1382 CONFIG_OBS="${CONFIG_OBS} gdbres.o"
1383 fi
1384 fi
1385 fi
1386
1387 AC_CONFIG_SUBDIRS(gdbtk)
1388 fi
1389
1390 AC_SUBST(X_CFLAGS)
1391 AC_SUBST(X_LDFLAGS)
1392 AC_SUBST(X_LIBS)
1393 AC_SUBST(TCL_DEPS)
1394 AC_SUBST(TK_DEPS)
1395 AC_SUBST(ITCLLIB)
1396 AC_SUBST(ITCL_DEPS)
1397 AC_SUBST(ITKLIB)
1398 AC_SUBST(ITK_DEPS)
1399 AC_SUBST(GDBTKLIBS)
1400 AC_SUBST(GDBTK_CFLAGS)
1401 AC_SUBST(GDBTK_SRC_DIR)
1402
1403 AC_PATH_X
1404
1405 # Check whether we should enable the TUI, but only do so if we really
1406 # can.
1407 if test x"$enable_tui" = xyes; then
1408 if test -d $srcdir/tui; then
1409 if test "$ac_cv_search_waddstr" != no; then
1410 CONFIG_OBS="$CONFIG_OBS \$(SUBDIR_TUI_OBS)"
1411 CONFIG_DEPS="$CONFIG_DEPS \$(SUBDIR_TUI_DEPS)"
1412 CONFIG_SRCS="$CONFIG_SRCS \$(SUBDIR_TUI_SRCS)"
1413 CONFIG_INITS="$CONFIG_INITS \$(SUBDIR_TUI_INITS)"
1414 ENABLE_CFLAGS="$ENABLE_CFLAGS \$(SUBDIR_TUI_CFLAGS)"
1415 CONFIG_ALL="${CONFIG_ALL} all-tui"
1416 CONFIG_CLEAN="${CONFIG_CLEAN} clean-tui"
1417 CONFIG_INSTALL="${CONFIG_INSTALL} install-tui"
1418 CONFIG_UNINSTALL="${CONFIG_UNINSTALL} uninstall-tui"
1419 else
1420 AC_MSG_WARN([no enhanced curses library found; disabling TUI])
1421 fi
1422 fi
1423 fi
1424
1425 # Unlike the sim directory, whether a simulator is linked is controlled by
1426 # presence of a SIM= and a SIM_OBS= definition in the target '.mt' file.
1427 # This code just checks for a few cases where we'd like to ignore those
1428 # definitions, even when they're present in the '.mt' file. These cases
1429 # are when --disable-sim is specified, or if the simulator directory is
1430 # not part of the source tree.
1431 #
1432 AC_ARG_ENABLE(sim,
1433 [ --enable-sim Link gdb with simulator],
1434 [echo "enable_sim = $enable_sim";
1435 echo "enableval = ${enableval}";
1436 case "${enableval}" in
1437 yes) ignore_sim=false ;;
1438 no) ignore_sim=true ;;
1439 *) ignore_sim=false ;;
1440 esac],
1441 [ignore_sim=false])
1442
1443 if test ! -d "${srcdir}/../sim"; then
1444 ignore_sim=true
1445 fi
1446
1447 if test "${ignore_sim}" = "true"; then
1448 IGNORE_SIM="SIM="
1449 IGNORE_SIM_OBS="SIM_OBS="
1450 else
1451 IGNORE_SIM=""
1452 IGNORE_SIM_OBS=""
1453 AC_DEFINE(WITH_SIM, 1, [Define if the simulator is being linked in.])
1454 fi
1455 AC_SUBST(IGNORE_SIM)
1456 AC_SUBST(IGNORE_SIM_OBS)
1457
1458 AC_SUBST(ENABLE_CFLAGS)
1459 AC_SUBST(PROFILE_CFLAGS)
1460
1461 AC_SUBST(CONFIG_OBS)
1462 AC_SUBST(CONFIG_DEPS)
1463 AC_SUBST(CONFIG_SRCS)
1464 AC_SUBST(CONFIG_ALL)
1465 AC_SUBST(CONFIG_CLEAN)
1466 AC_SUBST(CONFIG_INSTALL)
1467 AC_SUBST(CONFIG_UNINSTALL)
1468
1469 # List of host floatformats.
1470 AC_DEFINE_UNQUOTED(GDB_HOST_FLOAT_FORMAT,$gdb_host_float_format,[Host float floatformat])
1471 AC_DEFINE_UNQUOTED(GDB_HOST_DOUBLE_FORMAT,$gdb_host_double_format,[Host double floatformat])
1472 AC_DEFINE_UNQUOTED(GDB_HOST_LONG_DOUBLE_FORMAT,$gdb_host_long_double_format,[Host long double floatformat])
1473
1474 # target_subdir is used by the testsuite to find the target libraries.
1475 target_subdir=
1476 if test "${host}" != "${target}"; then
1477 target_subdir="${target_alias}/"
1478 fi
1479 AC_SUBST(target_subdir)
1480
1481 frags=
1482 if test "${gdb_native}" = "yes"; then
1483 host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
1484 if test ! -f ${host_makefile_frag}; then
1485 AC_MSG_ERROR("*** Gdb does not support native target ${host}")
1486 fi
1487 frags="$frags $host_makefile_frag"
1488 else
1489 host_makefile_frag=/dev/null
1490 fi
1491
1492 target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
1493 if test ! -f ${target_makefile_frag}; then
1494 AC_MSG_ERROR("*** Gdb does not support target ${target}")
1495 fi
1496 frags="$frags $target_makefile_frag"
1497
1498 AC_SUBST_FILE(host_makefile_frag)
1499 AC_SUBST_FILE(target_makefile_frag)
1500 AC_SUBST(frags)
1501
1502 changequote(,)dnl
1503 hostfile=`sed -n '
1504 s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
1505 ' ${host_makefile_frag}`
1506
1507 targetfile=`sed -n '
1508 s/^[ ]*DEPRECATED_TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
1509 ' ${target_makefile_frag}`
1510
1511 if test "${gdb_native}" = "yes"; then
1512 # We pick this up from the host configuration file (.mh) because we
1513 # do not have a native configuration Makefile fragment.
1514 nativefile=`sed -n '
1515 s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
1516 ' ${host_makefile_frag}`
1517 fi
1518 changequote([,])
1519
1520 if test x"${gdb_osabi}" != x ; then
1521 AC_DEFINE_UNQUOTED(GDB_OSABI_DEFAULT, $gdb_osabi,
1522 [Define to the default OS ABI for this configuration.])
1523 fi
1524
1525 # Enable multi-ice-gdb-server.
1526 AC_ARG_ENABLE(multi-ice,
1527 [ --enable-multi-ice build the multi-ice-gdb-server],
1528 [case $enableval in
1529 yes | no)
1530 ;;
1531 *) AC_MSG_ERROR([bad value $enableval for --enable-multi-ice]) ;;
1532 esac])
1533 if test "x$enable_multi_ice" = xyes; then
1534 AC_CONFIG_SUBDIRS(multi-ice)
1535 fi
1536
1537 # We only build gdbserver automatically in a native configuration.
1538 if test "$gdb_native" = "yes"; then
1539 AC_MSG_CHECKING(whether gdbserver is supported on this host)
1540 if test "x$build_gdbserver" = xyes; then
1541 AC_MSG_RESULT(yes)
1542 AC_CONFIG_SUBDIRS(gdbserver)
1543 else
1544 AC_MSG_RESULT(no)
1545 fi
1546 fi
1547
1548 # If hostfile (XM_FILE) and/or targetfile (DEPRECATED_TM_FILE) and/or
1549 # nativefile (NAT_FILE) is not set in config/*/*.m[ht] files, we link
1550 # to an empty version.
1551
1552 files=
1553 links=
1554
1555 rm -f xm.h
1556 xm_h=""
1557 if test "${hostfile}" != ""; then
1558 xm_h=xm.h
1559 case "${hostfile}" in
1560 xm-*.h ) GDB_XM_FILE="config/${gdb_host_cpu}/${hostfile}" ;;
1561 * ) GDB_XM_FILE="${hostfile}"
1562 esac
1563 files="${files} ${GDB_XM_FILE}"
1564 links="${links} xm.h"
1565 AC_DEFINE_UNQUOTED(GDB_XM_FILE, "${GDB_XM_FILE}", [hostfile])
1566 fi
1567 AC_SUBST(xm_h)
1568
1569 rm -f tm.h
1570 tm_h=""
1571 if test "${targetfile}" != ""; then
1572 tm_h=tm.h
1573 case "${targetfile}" in
1574 tm-*.h ) GDB_TM_FILE="config/${gdb_target_cpu}/${targetfile}" ;;
1575 * ) GDB_TM_FILE="${targetfile}"
1576 esac
1577 files="${files} ${GDB_TM_FILE}"
1578 links="${links} tm.h"
1579 AC_DEFINE_UNQUOTED(GDB_TM_FILE, "${GDB_TM_FILE}", [targetfile])
1580 fi
1581 AC_SUBST(tm_h)
1582
1583 rm -f nm.h
1584 nm_h=""
1585 if test "${nativefile}" != ""; then
1586 nm_h=nm.h
1587 case "${nativefile}" in
1588 nm-*.h ) GDB_NM_FILE="config/${gdb_host_cpu}/${nativefile}" ;;
1589 * ) GDB_NM_FILE="${nativefile}"
1590 esac
1591 files="${files} ${GDB_NM_FILE}"
1592 links="${links} nm.h"
1593 AC_DEFINE_UNQUOTED(GDB_NM_FILE, "${GDB_NM_FILE}", [nativefile])
1594 fi
1595 AC_SUBST(nm_h)
1596
1597 AC_LINK_FILES($files, $links)
1598
1599 dnl Check for exe extension set on certain hosts (e.g. Win32)
1600 AC_EXEEXT
1601
1602 dnl Detect the character set used by this host.
1603
1604 dnl At the moment, we just assume it's ISO-8859-1 (which is a
1605 dnl superset of ASCII containing the characters needed for French,
1606 dnl German, Spanish, Italian, and possibly others), but if were
1607 dnl *were* to support any host character sets other than ISO-8859-1,
1608 dnl here's where we'd detect it.
1609 AC_DEFINE(GDB_DEFAULT_HOST_CHARSET, "ISO-8859-1",
1610 [Define to be a string naming the default host character set.])
1611
1612 AM_ICONV
1613
1614 AC_OUTPUT(Makefile .gdbinit:gdbinit.in,
1615 [
1616 dnl Autoconf doesn't provide a mechanism for modifying definitions
1617 dnl provided by makefile fragments.
1618 dnl
1619
1620 changequote(,)dnl
1621 sed -e '/^DEPRECATED_TM_FILE[ ]*=/s,^DEPRECATED_TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
1622 /^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
1623 /^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
1624 mv -f Makefile.tmp Makefile
1625 changequote([,])dnl
1626
1627
1628 case x$CONFIG_HEADERS in
1629 xconfig.h:config.in)
1630 echo > stamp-h ;;
1631 esac
1632 ],
1633 [
1634 gdb_host_cpu=$gdb_host_cpu
1635 gdb_target_cpu=$gdb_target_cpu
1636 nativefile=$nativefile
1637 ])
1638
1639 exit 0
This page took 0.0735209999999999 seconds and 4 git commands to generate.