gdb/configure.in

   1 configdirs="doc testsuite"
   2 srcname="GDB"
   3 srctrigger=main.c
   4 gdb_serial_driver=ser-unix.c
   5
   6 echo ${target}
   7
   8 if [ "${target_cpu}" = "sparclite" ] ; then
   9         configdirs = "$configdirs sparclite"
  10 fi
  11
  12 # per-host:
  13
  14 # Map host cpu into the config cpu subdirectory name.
  15 # The default is $host_cpu.
  16
  17 case "${host_cpu}" in
  18
  19 c[12])                  gdb_host_cpu=convex ;;
  20 hppa*)                  gdb_host_cpu=pa ;;
  21 i[34]86)                gdb_host_cpu=i386 ;;
  22 m68*)                   gdb_host_cpu=m68k ;;
  23 np1)                    gdb_host_cpu=gould ;;
  24 pyramid)                gdb_host_cpu=pyr ;;
  25 *)                      gdb_host_cpu=$host_cpu ;;
  26
  27 esac
  28
  29 # map host info into gdb names.
  30
  31 case "${host}" in
  32
  33 a29k-*-*)               gdb_host=ultra3 ;;
  34
  35 arm-*-*)                gdb_host=arm ;;
  36
  37 c[12]-*-*)              gdb_host=convex ;;
  38
  39 hppa*-hp-bsd)           gdb_host=hppabsd ;;
  40 hppa*-hp-hpux)          gdb_host=hppahpux ;;
  41
  42 i[34]86-ncr-*)          gdb_host=ncr3000 ;;
  43 i[34]86-sequent-*)      gdb_host=symmetry ;;
  44
  45 i[34]86-*-bsd*)         gdb_host=i386bsd ;;
  46 i[34]86-*-go32)         gdb_host=go32
  47                         gdb_serial_driver=ser-go32.c
  48                         ;;
  49 i[34]86-*-linux)        gdb_host=linux ;;
  50 i[34]86-*-mach)         gdb_host=i386mach ;;
  51 i[34]86-*-sco3.2v4*)    gdb_host=i386sco4 ;;
  52 i[34]86-*-sco*)         gdb_host=i386sco ;;
  53 i[34]86-*-solaris*)     gdb_host=i386sol2 ;;
  54 i[34]86-*-sunos*)       gdb_host=sun386 ;;
  55 i[34]86-*-sysv32)       gdb_host=i386v32 ;;
  56 i[34]86-*-sysv4*)       gdb_host=i386v4 ;;
  57 i[34]86-*-sysv*)        gdb_host=i386v ;;
  58
  59 m680[01]0-sun-sunos3*)  gdb_host=sun2os3 ;;
  60 m680[01]0-sun-sunos4*)  gdb_host=sun2os4 ;;
  61 m68030-sony-*)          gdb_host=news1000 ;;
  62
  63 m68*-altos-*)           gdb_host=altos ;;
  64 m68*-apollo*-sysv*)     gdb_host=apollo68v ;;
  65 m68*-apollo*-bsd*)      gdb_host=apollo68b ;;
  66 m68*-att-*)             gdb_host=3b1 ;;
  67 m68*-cbm-sysv4*)        gdb_host=amix ;;
  68 m68*-hp-bsd)            gdb_host=hp300bsd ;;
  69 m68*-hp-hpux)           gdb_host=hp300hpux ;;
  70 m68*-isi-*)             gdb_host=isi ;;
  71 m68*-sony-*)            gdb_host=news ;;
  72 m68*-sun-sunos3*)       gdb_host=sun3os3 ;;
  73 m68*-sun-sunos4*)       gdb_host=sun3os4 ;;
  74 m68*-sun-*)             gdb_host=sun3os4 ;;
  75
  76 m88k-motorola-*)        gdb_host=delta88 ;;
  77 m88k-*-*)               gdb_host=m88k ;;
  78
  79 mips-dec-*)             gdb_host=decstation ;;
  80 mips-little-*)          gdb_host=littlemips ;;
  81 mips-sgi-irix3)         gdb_host=irix3 ;;
  82 mips-sgi-irix4*)        gdb_host=irix4 ;;
  83 mips-sony-*)            gdb_host=bigmips ;;
  84
  85 none-*-*)               gdb_host=none ;;
  86
  87 np1-*-*)                gdb_host=np1 ;;
  88
  89 ns32k-umax-*)           gdb_host=umax ;;
  90 ns32k-utek-sysv)        gdb_host=merlin ;;
  91
  92 pn-*-*)                 gdb_host=pn ;;
  93
  94 pyramid-*-*)            gdb_host=pyramid ;;
  95
  96 romp-*-*)               gdb_host=rtbsd ;;
  97
  98 rs6000-*-*)             gdb_host=rs6000 ;;
  99
 100 sparc-*-solaris2*)      gdb_host=sun4sol2 ;;
 101 sparc-*-sunos4*)        gdb_host=sun4os4 ;;
 102 sparc-*-*)              gdb_host=sun4os4 ;;
 103
 104 tahoe-*-*)              gdb_host=tahoe ;;
 105
 106 vax-*-bsd*)             gdb_host=vaxbsd ;;
 107 vax-*-ultrix2*)         gdb_host=vaxult2 ;;
 108 vax-*-ultrix*)          gdb_host=vaxult ;;
 109
 110 esac
 111
 112
 113 if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
 114         echo '***' "Gdb does not support host ${host}" 1>&2
 115         exit 1
 116 fi
 117
 118 #  We really shouldn't depend on there being a space after XM_FILE= ...
 119 hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
 120
 121 # per-target:
 122
 123 # Map target cpu into the config cpu subdirectory name.
 124 # The default is $target_cpu.
 125
 126 case "${target_cpu}" in
 127
 128 c[12])                  gdb_target_cpu=convex ;;
 129 hppa*)                  gdb_target_cpu=pa ;;
 130 i[34]86)                gdb_target_cpu=i386 ;;
 131 m68*)                   gdb_target_cpu=m68k ;;
 132 np1)                    gdb_target_cpu=gould ;;
 133 pn)                     gdb_target_cpu=gould ;;
 134 pyramid)                gdb_target_cpu=pyr ;;
 135 sparc*)                 gdb_target_cpu=sparc ;;
 136 *)                      gdb_target_cpu=$target_cpu ;;
 137
 138 esac
 139
 140 # map target info into gdb names.
 141
 142 case "${target}" in
 143
 144 a29k-*-aout)            gdb_target=a29k ;;
 145 a29k-*-coff)            gdb_target=a29k ;;
 146 a29k-*-elf)             gdb_target=a29k ;;
 147 a29k-*-ebmon)           gdb_target=a29k ;;
 148 a29k-*-kern)            gdb_target=a29k-kern ;;
 149 a29k-*-none)            gdb_target=a29k ;;
 150 a29k-*-sym1)            gdb_target=ultra3 ;;
 151 a29k-*-udi)             gdb_target=a29k-udi ;;
 152
 153 arm-*-*)                gdb_target=arm ;;
 154
 155 c1-*-*)                 gdb_target=convex ;;
 156 c2-*-*)                 gdb_target=convex ;;
 157
 158 h8300-*-*)              gdb_target=h8300hms ;;
 159 h8500-*-*)              gdb_target=h8500hms ;;
 160
 161 hppa*-*-bsd)            gdb_target=hppabsd ;;
 162 hppa*-*-hpux)           gdb_target=hppahpux ;;
 163
 164 i[34]86-sequent-*)      gdb_target=symmetry ;;
 165 i[34]86-ncr-*)          gdb_target=ncr3000 ;;
 166
 167 i[34]86-*-aout)         gdb_target=i386aout ;;
 168 i[34]86-*-coff)         gdb_target=i386v ;;
 169 i[34]86-*-elf)          gdb_target=i386v ;;
 170
 171 i[34]86-*-bsd*)         gdb_target=i386bsd ;;
 172 i[34]86-*-go32)         gdb_target=i386aout ;;
 173 i[34]86-*-solaris*)     gdb_target=i386sol2 ;;
 174 i[34]86-*-sunos*)       gdb_target=sun386 ;;
 175 i[34]86-*-sysv4*)       gdb_target=i386v4 ;;
 176 i[34]86-*-sco*)         gdb_target=i386v ;;
 177 i[34]86-*-sysv*)        gdb_target=i386v ;;
 178 i[34]86-*-linux)        gdb_target=linux ;;
 179
 180 i960-*-bout)            gdb_target=vxworks960 ;;
 181 i960-*-coff)            gdb_target=nindy960 ;;
 182 i960-*-elf)             gdb_target=nindy960 ;;
 183
 184 i960-*-nindy)           gdb_target=nindy960 ;;
 185 i960-*-vxworks)         gdb_target=vxworks960 ;;
 186
 187 m68000-*-aout)          gdb_target=m68k-nofp ;;
 188 m68000-*-coff)          gdb_target=m68k-nofp ;;
 189 m68000-*-elf)           gdb_target=m68k-nofp ;;
 190 m68000-*-sunos3*)       gdb_target=sun2os3 ;;
 191 m68000-*-sunos4*)       gdb_target=sun2os4 ;;
 192
 193 m68*-cbm-sysv4*)        gdb_target=amix ;;
 194 m68*-hp-bsd)            gdb_target=hp300bsd ;;
 195 m68*-hp-hpux)           gdb_target=hp300hpux ;;
 196
 197 m68*-altos-*)           gdb_target=altos ;;
 198 m68*-att-*)             gdb_target=3b1 ;;
 199 m68*-ericsson-*)        gdb_target=es1800 ;;
 200 m68*-isi-*)             gdb_target=isi ;;
 201 m68*-netx-*)            gdb_target=vxworks68 ;;
 202 m68*-sony-*)            gdb_target=news ;;
 203 m68*-tandem-*)          gdb_target=st2000 ;;
 204
 205 m68*-*-aout)            gdb_target=m68k-fp ;;
 206 m68*-*-coff)            gdb_target=m68k-fp ;;
 207 m68*-*-elf)             gdb_target=m68k-fp ;;
 208 m68*-*-os68k)           gdb_target=os68k ;;
 209 m68*-*-sunos3*)         gdb_target=sun3os3 ;;
 210 m68*-*-sunos4*)         gdb_target=sun3os4 ;;
 211 m68*-*-vxworks*)        gdb_target=vxworks68 ;;
 212
 213 m88k-motorola-*)        gdb_target=delta88 ;;
 214 m88k-*-*)               gdb_target=m88k ;;
 215
 216 mips-big-*)             gdb_target=bigmips ;;
 217 mips-dec-*)             gdb_target=decstation ;;
 218 mips-idt-ecoff)         gdb_target=idt ;;
 219 mips-little-*)          gdb_target=littlemips ;;
 220 mips-sgi-*)             gdb_target=irix3 ;;
 221 mips-sony-*)            gdb_target=bigmips ;;
 222
 223 none-*-*)               gdb_target=none ;;
 224
 225 np1-*-*)                gdb_target=np1 ;;
 226
 227 ns32k-utek-sysv)        gdb_target=merlin ;;
 228 ns32k-utek-*)           gdb_target=umax ;;
 229
 230 pn-*-*)                 gdb_target=pn ;;
 231
 232 pyramid-*-*)            gdb_target=pyramid ;;
 233
 234 rs6000-*-*)             gdb_target=rs6000 ;;
 235
 236 sparc-*-aout)           gdb_target=sparc-em ;;
 237 sparc-*-coff)           gdb_target=sparc-em ;;
 238 sparc-*-elf)            gdb_target=sparc-em ;;
 239 sparc-*-solaris2*)      gdb_target=sun4sol2 ;;
 240 sparc-*-sunos4*)        gdb_target=sun4os4 ;;
 241 sparc-*-vxworks*)       gdb_target=sparc-em ;;
 242 sparc-*-*)              gdb_target=sun4os4 ;;
 243 sparclite*-*-*)         gdb_target=sparclite ;;
 244
 245 tahoe-*-*)              gdb_target=tahoe ;;
 246 vax-*-*)                gdb_target=vax ;;
 247
 248 z8k-unknown-sim)        gdb_target=z8ksim ;;
 249 esac
 250
 251 if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
 252         echo '***' "Gdb does not support target ${target}" 1>&2
 253         exit 1
 254 fi
 255
 256 if [ -z "${removing}" ] ; then
 257         cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
 258                 print substr($0,6)}'
 259 fi
 260
 261 #  We really shouldn't depend on there being a space after TM_FILE= ...
 262 targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`
 263
 264 if [ "${target}" = "${host}" ] ; then
 265         nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
 266 fi
 267
 268 host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
 269 target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt
 270
 271 # If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
 272 # (NAT_FILE) is not set in the ?config/* file, we don't make the
 273 # corresponding links.  But we have to remove the xm.h files and tm.h
 274 # files anyway, e.g. when switching from "configure host" to
 275 # "configure none".
 276
 277 files=
 278 links=
 279 rm -f xm.h
 280 rm -f ser-hardwire.c
 281 if [ "${hostfile}" != "" ]; then
 282         if [ -f ${srcdir}/config/${hostfile} ]; then
 283                 files="${files} config/${hostfile}"
 284         else
 285                 files="${files} config/${gdb_host_cpu}/${hostfile}"
 286         fi
 287         links="${links} xm.h"
 288
 289         files="${files} ${gdb_serial_driver}"
 290         links="${links} ser-hardwire.c"
 291 fi
 292 rm -f tm.h
 293 if [ "${targetfile}" != "" ]; then
 294         if [ -f ${srcdir}/config/${targetfile} ]; then
 295                 files="${files} config/${targetfile}"
 296         else
 297                 files="${files} config/${gdb_target_cpu}/${targetfile}"
 298         fi
 299         links="${links} tm.h"
 300 fi
 301 rm -f nm.h
 302 if [ "${nativefile}" != "" ]; then
 303         if [ -f ${srcdir}/config/${nativefile} ]; then
 304                 files="${files} config/${nativefile}"
 305         else
 306                 files="${files} config/${gdb_host_cpu}/${nativefile}"
 307         fi
 308         links="${links} nm.h"
 309 # temporary scaffolding until all hosts have the host/target/native
 310 # split in place.
 311 else
 312         files="${files} config/nm-trash.h"
 313         links="${links} nm.h"
 314 fi
 315
 316 # post-target:
 317
 318 case ${srcdir} in
 319   .)
 320     ;;
 321   *)
 322     grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
 323       echo "source ${srcdir}/.gdbinit" >> .gdbinit
 324 esac
 325
 326 if [ "${nativefile}" = "" ] ; then
 327         sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
 328                 < Makefile > Makefile.tem
 329         mv -f Makefile.tem Makefile
 330 fi
 331
 332 cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile