gdb/configure.in

   1 configdirs="doc testsuite"
   2 srcname="GDB"
   3 srctrigger=main.c
   4 gdb_serial_driver=ser-unix.c
   5
   6 # per-host:
   7
   8 # Map host cpu into the config cpu subdirectory name.
   9 # The default is $host_cpu.
  10
  11 case "${host_cpu}" in
  12
  13 c[12])                  gdb_host_cpu=convex ;;
  14 hppa*)                  gdb_host_cpu=pa ;;
  15 i[34]86)                gdb_host_cpu=i386 ;;
  16 m68*)                   gdb_host_cpu=m68k ;;
  17 np1)                    gdb_host_cpu=gould ;;
  18 pyramid)                gdb_host_cpu=pyr ;;
  19 *)                      gdb_host_cpu=$host_cpu ;;
  20
  21 esac
  22
  23 # map host info into gdb names.
  24
  25 case "${host}" in
  26
  27 a29k-*-*)               gdb_host=ultra3 ;;
  28
  29 arm-*-*)                gdb_host=arm ;;
  30
  31 c[12]-*-*)              gdb_host=convex ;;
  32
  33 hppa*-hp-bsd*)          gdb_host=hppabsd ;;
  34 hppa*-hp-hpux*)         gdb_host=hppahpux ;;
  35
  36 i[34]86-ncr-*)          gdb_host=ncr3000 ;;
  37 i[34]86-sequent-*)      gdb_host=symmetry ;;
  38
  39 i[34]86-*-bsd*)         gdb_host=i386bsd ;;
  40 i[34]86-*-go32)         gdb_host=go32
  41                         gdb_serial_driver=ser-go32.c
  42                         ;;
  43 i[34]86-*-linux)        gdb_host=linux ;;
  44 i[34]86-*-mach)         gdb_host=i386mach ;;
  45 i[34]86-*-sco3.2v4*)    gdb_host=i386sco4 ;;
  46 i[34]86-*-sco*)         gdb_host=i386sco ;;
  47 i[34]86-*-solaris*)     gdb_host=i386sol2 ;;
  48 i[34]86-*-sunos*)       gdb_host=sun386 ;;
  49 i[34]86-*-sysv3.2)      gdb_host=i386v32 ;;
  50 i[34]86-*-sysv4*)       gdb_host=i386v4 ;;
  51 i[34]86-*-sysv*)        gdb_host=i386v ;;
  52 i[34]86-*-isc*)         gdb_host=i386v32 ;;
  53
  54 m680[01]0-sun-sunos3*)  gdb_host=sun2os3 ;;
  55 m680[01]0-sun-sunos4*)  gdb_host=sun2os4 ;;
  56 m68030-sony-*)          gdb_host=news1000 ;;
  57
  58 m68*-altos-*)           gdb_host=altos ;;
  59 m68*-apollo*-sysv*)     gdb_host=apollo68v ;;
  60 m68*-apollo*-bsd*)      gdb_host=apollo68b ;;
  61 m68*-att-*)             gdb_host=3b1 ;;
  62 m68*-cbm-sysv4*)        gdb_host=amix ;;
  63 m68*-hp-bsd*)           gdb_host=hp300bsd ;;
  64 m68*-hp-hpux*)          gdb_host=hp300hpux ;;
  65 m68*-isi-*)             gdb_host=isi ;;
  66 m68*-sony-*)            gdb_host=news ;;
  67 m68*-sun-sunos3*)       gdb_host=sun3os3 ;;
  68 m68*-sun-sunos4*)       gdb_host=sun3os4 ;;
  69 m68*-sun-*)             gdb_host=sun3os4 ;;
  70
  71 m88k-motorola-*)        gdb_host=delta88 ;;
  72 m88k-*-*)               gdb_host=m88k ;;
  73
  74 mips-dec-*)             gdb_host=decstation ;;
  75 mips-little-*)          gdb_host=littlemips ;;
  76 mips-sgi-irix3)         gdb_host=irix3 ;;
  77 mips-sgi-irix4*)        gdb_host=irix4 ;;
  78 mips-sony-*)            gdb_host=bigmips ;;
  79
  80 none-*-*)               gdb_host=none ;;
  81
  82 np1-*-*)                gdb_host=np1 ;;
  83
  84 ns32k-umax-*)           gdb_host=umax ;;
  85 ns32k-utek-sysv)        gdb_host=merlin ;;
  86
  87 pn-*-*)                 gdb_host=pn ;;
  88
  89 pyramid-*-*)            gdb_host=pyramid ;;
  90
  91 romp-*-*)               gdb_host=rtbsd ;;
  92
  93 rs6000-*-*)             gdb_host=rs6000 ;;
  94
  95 sparc-*-solaris2*)      gdb_host=sun4sol2 ;;
  96 sparc-*-sunos4*)        gdb_host=sun4os4 ;;
  97 sparc-*-*)              gdb_host=sun4os4 ;;
  98
  99 tahoe-*-*)              gdb_host=tahoe ;;
 100
 101 vax-*-bsd*)             gdb_host=vaxbsd ;;
 102 vax-*-ultrix2*)         gdb_host=vaxult2 ;;
 103 vax-*-ultrix*)          gdb_host=vaxult ;;
 104
 105 esac
 106
 107
 108 if [ ! -f ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ]; then
 109         echo '***' "Gdb does not support host ${host}" 1>&2
 110         exit 1
 111 fi
 112
 113 #  We really shouldn't depend on there being a space after XM_FILE= ...
 114 hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
 115
 116 # per-target:
 117
 118 # Map target cpu into the config cpu subdirectory name.
 119 # The default is $target_cpu.
 120
 121 case "${target_cpu}" in
 122
 123 c[12])                  gdb_target_cpu=convex ;;
 124 hppa*)                  gdb_target_cpu=pa ;;
 125 i[34]86)                gdb_target_cpu=i386 ;;
 126 m68*)                   gdb_target_cpu=m68k ;;
 127 np1)                    gdb_target_cpu=gould ;;
 128 pn)                     gdb_target_cpu=gould ;;
 129 pyramid)                gdb_target_cpu=pyr ;;
 130 sparc*)                 gdb_target_cpu=sparc ;;
 131 *)                      gdb_target_cpu=$target_cpu ;;
 132
 133 esac
 134
 135 # map target info into gdb names.
 136
 137 case "${target}" in
 138
 139 a29k-*-aout)            gdb_target=a29k ;;
 140 a29k-*-coff)            gdb_target=a29k ;;
 141 a29k-*-elf)             gdb_target=a29k ;;
 142 a29k-*-ebmon)           gdb_target=a29k ;;
 143 a29k-*-kern)            gdb_target=a29k-kern ;;
 144 a29k-*-none)            gdb_target=a29k ;;
 145 a29k-*-sym1)            gdb_target=ultra3 ;;
 146 a29k-*-udi)             gdb_target=a29k-udi ;;
 147
 148 arm-*-*)                gdb_target=arm ;;
 149
 150 c1-*-*)                 gdb_target=convex ;;
 151 c2-*-*)                 gdb_target=convex ;;
 152
 153 h8300-*-*)              gdb_target=h8300hms ;;
 154 h8500-*-*)              gdb_target=h8500hms ;;
 155
 156 sh-*-*)                 gdb_target=sh ;;
 157
 158 hppa*-*-bsd*)           gdb_target=hppabsd ;;
 159 hppa*-*-hpux*)          gdb_target=hppahpux ;;
 160
 161 i[34]86-sequent-*)      gdb_target=symmetry ;;
 162 i[34]86-ncr-*)          gdb_target=ncr3000 ;;
 163
 164 i[34]86-*-aout)         gdb_target=i386aout ;;
 165 i[34]86-*-coff)         gdb_target=i386v ;;
 166 i[34]86-*-elf)          gdb_target=i386v ;;
 167
 168 i[34]86-*-bsd*)         gdb_target=i386bsd ;;
 169 i[34]86-*-go32)         gdb_target=i386aout ;;
 170 i[34]86-*-solaris*)     gdb_target=i386sol2 ;;
 171 i[34]86-*-sunos*)       gdb_target=sun386 ;;
 172 i[34]86-*-sysv4*)       gdb_target=i386v4 ;;
 173 i[34]86-*-sco*)         gdb_target=i386v ;;
 174 i[34]86-*-sysv*)        gdb_target=i386v ;;
 175 i[34]86-*-linux*)       gdb_target=linux ;;
 176 i[34]86-*-isc*)         gdb_target=i386v ;;
 177
 178 i960-*-bout)            gdb_target=vxworks960 ;;
 179 i960-*-coff)            gdb_target=nindy960 ;;
 180 i960-*-elf)             gdb_target=nindy960 ;;
 181
 182 i960-*-nindy)           gdb_target=nindy960 ;;
 183 i960-*-vxworks)         gdb_target=vxworks960 ;;
 184
 185 m68000-*-aout)          gdb_target=m68k-nofp ;;
 186 m68000-*-coff)          gdb_target=m68k-nofp ;;
 187 m68000-*-elf)           gdb_target=m68k-nofp ;;
 188 m68000-*-sunos3*)       gdb_target=sun2os3 ;;
 189 m68000-*-sunos4*)       gdb_target=sun2os4 ;;
 190
 191 m68*-cbm-sysv4*)        gdb_target=amix ;;
 192 m68*-hp-bsd*)           gdb_target=hp300bsd ;;
 193 m68*-hp-hpux*)          gdb_target=hp300hpux ;;
 194
 195 m68*-altos-*)           gdb_target=altos ;;
 196 m68*-att-*)             gdb_target=3b1 ;;
 197 m68*-ericsson-*)        gdb_target=es1800 ;;
 198 m68*-isi-*)             gdb_target=isi ;;
 199 m68*-netx-*)            gdb_target=vxworks68 ;;
 200 m68*-sony-*)            gdb_target=news ;;
 201 m68*-tandem-*)          gdb_target=st2000 ;;
 202
 203 m68*-*-aout)            gdb_target=m68k-fp ;;
 204 m68*-*-coff)            gdb_target=m68k-fp ;;
 205 m68*-*-elf)             gdb_target=m68k-fp ;;
 206 m68*-*-os68k)           gdb_target=os68k ;;
 207 m68*-*-sunos3*)         gdb_target=sun3os3 ;;
 208 m68*-*-sunos4*)         gdb_target=sun3os4 ;;
 209 m68*-*-vxworks*)        gdb_target=vxworks68 ;;
 210
 211 m88k-motorola-*)        gdb_target=delta88 ;;
 212 m88k-*-*)               gdb_target=m88k ;;
 213
 214 mips-big-*)             gdb_target=bigmips ;;
 215 mips-dec-*)             gdb_target=decstation ;;
 216 mips-idt-ecoff)         gdb_target=idt ;;
 217 mips-little-*)          gdb_target=littlemips ;;
 218 mips-sgi-*)             gdb_target=irix3 ;;
 219 mips-sony-*)            gdb_target=bigmips ;;
 220
 221 none-*-*)               gdb_target=none ;;
 222
 223 np1-*-*)                gdb_target=np1 ;;
 224
 225 ns32k-utek-sysv)        gdb_target=merlin ;;
 226 ns32k-utek-*)           gdb_target=umax ;;
 227
 228 pn-*-*)                 gdb_target=pn ;;
 229
 230 pyramid-*-*)            gdb_target=pyramid ;;
 231
 232 rs6000-*-*)             gdb_target=rs6000 ;;
 233
 234 sparc-*-aout)           gdb_target=sparc-em ;;
 235 sparc-*-coff)           gdb_target=sparc-em ;;
 236 sparc-*-elf)            gdb_target=sparc-em ;;
 237 sparc-*-solaris2*)      gdb_target=sun4sol2 ;;
 238 sparc-*-sunos4*)        gdb_target=sun4os4 ;;
 239 sparc-*-vxworks*)       gdb_target=sparc-em ;;
 240 sparc-*-*)              gdb_target=sun4os4 ;;
 241 sparclite*-*-*)         gdb_target=sparclite ;;
 242
 243 tahoe-*-*)              gdb_target=tahoe ;;
 244 vax-*-*)                gdb_target=vax ;;
 245
 246 z8k-*-sim)              gdb_target=z8ksim ;;
 247 esac
 248
 249 if [ ! -f ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt ]; then
 250         echo '***' "Gdb does not support target ${target}" 1>&2
 251         exit 1
 252 fi
 253
 254 if [ -z "${removing}" ] ; then
 255         cat ${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
 256                 print substr($0,6)}'
 257 fi
 258
 259 #  We really shouldn't depend on there being a space after TM_FILE= ...
 260 targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt`
 261
 262 if [ "${target}" = "${host}" ] ; then
 263         nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh`
 264 fi
 265
 266 host_makefile_frag=config/${gdb_host_cpu}/${gdb_host}.mh
 267 target_makefile_frag=config/${gdb_target_cpu}/${gdb_target}.mt
 268
 269 # If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
 270 # (NAT_FILE) is not set in the ?config/* file, we don't make the
 271 # corresponding links.  But we have to remove the xm.h files and tm.h
 272 # files anyway, e.g. when switching from "configure host" to
 273 # "configure none".
 274
 275 files=
 276 links=
 277 rm -f xm.h
 278 rm -f ser-hardwire.c
 279 if [ "${hostfile}" != "" ]; then
 280         if [ -f ${srcdir}/config/${hostfile} ]; then
 281                 files="${files} config/${hostfile}"
 282         else
 283                 files="${files} config/${gdb_host_cpu}/${hostfile}"
 284         fi
 285         links="${links} xm.h"
 286
 287         files="${files} ${gdb_serial_driver}"
 288         links="${links} ser-hardwire.c"
 289 fi
 290 rm -f tm.h
 291 if [ "${targetfile}" != "" ]; then
 292         if [ -f ${srcdir}/config/${targetfile} ]; then
 293                 files="${files} config/${targetfile}"
 294         else
 295                 files="${files} config/${gdb_target_cpu}/${targetfile}"
 296         fi
 297         links="${links} tm.h"
 298 fi
 299 rm -f nm.h
 300 if [ "${nativefile}" != "" ]; then
 301         if [ -f ${srcdir}/config/${nativefile} ]; then
 302                 files="${files} config/${nativefile}"
 303         else
 304                 files="${files} config/${gdb_host_cpu}/${nativefile}"
 305         fi
 306         links="${links} nm.h"
 307 # temporary scaffolding until all hosts have the host/target/native
 308 # split in place.
 309 else
 310         files="${files} config/nm-trash.h"
 311         links="${links} nm.h"
 312 fi
 313
 314 if [ ${target_cpu} = "sparclite" ]; then
 315         configdirs="${configdirs} sparclite"
 316 fi
 317
 318 # post-target:
 319
 320 case ${srcdir} in
 321   .)
 322     ;;
 323   *)
 324     grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
 325       echo "source ${srcdir}/.gdbinit" >> .gdbinit
 326 esac
 327
 328 if [ "${nativefile}" = "" ] ; then
 329         sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
 330                 < Makefile > Makefile.tem
 331         mv -f Makefile.tem Makefile
 332 fi
 333
 334 cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile