gdb/doc/ChangeLog

   1 2013-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
   2
   3         * Makefile.in (POD2MAN1, POD2MAN5): Replace $(VERSION) by ../version.in.
   4
   5 2013-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
   6             Eli Zaretskii  <eliz@gnu.org>
   7
   8         * gdb.texinfo (gdbserver man): Rename tty to comm.  Swap --attach
   9         parameters order.  Remove "On some targets" for --attach.  Document the
  10         --multi parameter and extended-remote command.  Document all the
  11         options.
  12
  13 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
  14
  15         * gdb.texinfo (gdb man): Mention option -p.  Include Fortran to
  16         the list of supported languages.
  17
  18 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
  19
  20         Convert man pages to texinfo, new gdbinit.5 texinfo page.
  21         * Makefile.in (mandir, man1dir, man5dir, SYSTEM_GDBINIT, MANCONF,
  22         (TEXI2POD, POD2MAN1, POD2MAN5, MAN1S, MAN5S, MANS, man): New.
  23         (diststuff): Add man.
  24         (install-man, install-man1, install-man5, uninstall-man, uninstall-man1)
  25         (uninstall-man5): New.
  26         (STAGESTUFF): Add *.1 and *.5.
  27         (GDBvn.texi): Add SYSTEM_GDBINIT.
  28         (gdb.1, gdbserver.1, gdbinit.5): New.
  29         (maintainer-clean realclean): Add $(MANS).
  30         (install): Add install-man.
  31         (uninstall): Add uninstall-man.
  32         * gdb.texinfo (@include gdb-cfg.texi): Wrap it by @c man begin INCLUDE.
  33         (@copying): Wrap it by @c man begin COPYRIGHT.
  34         (Top): Add Man Pages.
  35         (Man Pages, gdb man, gdbserver man, gdbinit man): New.
  36
  37 2013-04-02  Pedro Alves  <palves@redhat.com>
  38
  39         * gdb.texinfo (Debugging Output): Document "set/show debug
  40         aarch64", "set/show debug coff-pe-read" and "set/show debug
  41         mach-o".
  42
  43 2013-04-02  Pedro Alves  <palves@redhat.com>
  44
  45         * gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
  46         table>: Add entry for "trace-buffer-size".
  47
  48 2013-03-28  Pedro Alves  <palves@redhat.com>
  49
  50         * gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
  51         table>: Add entry for "trace-status".
  52
  53 2013-03-28  Eli Zaretskii  <eliz@gnu.org>
  54
  55         * gdb.texinfo (Maintenance Commands): Use @enumerate, not "@table
  56         @bullet", which is invalid (makeinfo 5.1 barfs).
  57
  58 2013-03-28  Pedro Alves  <palves@redhat.com>
  59
  60         PR gdb/15294
  61
  62         * gdb.texinfo (List) <set listsize>: Adjust to document that
  63         listsize 0 means no limit, and remove mention of -1.
  64
  65 2013-03-22  Yao Qi  <yao@codesourcery.com>
  66
  67         * gdb.texinfo (Embedded Processors): Remove menu item
  68         "OpenRISC 1000".
  69         (OpenRISC 1000): Remove.
  70
  71 2013-03-21  Doug Evans  <dje@google.com>
  72
  73         * gdb.texinfo (Maintenance Commands): Add docs for
  74         "mt set per-command {space,time,symtab} {on,off}".
  75
  76 2013-03-14  Hui Zhu  <hui@codesourcery.com>
  77             Yao Qi  <yao@codesourcery.com>
  78
  79         * gdb.texinfo (Trace Files): Add "tsave -ctf".
  80
  81 2013-03-13  Keith Seitz  <keiths@redhat.com>
  82
  83         * gdb.texinfo (Maintenance Commands): Add missing ')' for
  84         "maint agent" reference to Dynamic printf.
  85
  86 2013-03-11  Eli Zaretskii  <eliz@gnu.org>
  87
  88         * gdb.texinfo (General Query Packets): Don't use colon in index
  89         entries visible to Info format.
  90
  91 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
  92
  93         * gdb.texinfo (Process Record and Replay): Document record
  94         changes.
  95
  96 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
  97
  98         * gdb.texinfo (Requirements): List qXfer:btrace:read requiring expat.
  99         (General Query Packets): Describe Qbtrace:bts, Qbtrace:off, and
 100         qXfer:btrace:read.
 101
 102 2013-03-09  Eli Zaretskii  <eliz@gnu.org>
 103
 104         * gdb.texinfo (General Query Packets, Tracepoint Packets): Don't
 105         use colons in @anchor and @cindex entries.
 106
 107 2013-03-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>
 108
 109         * gdb.texinfo (QTBuffer:size): Add cindex and anchor.
 110
 111 2013-03-08  Stan Shebs  <stan@codesourcery.com>
 112             Hafiz Abid Qadeer  <abidh@codesourcery.com>
 113
 114         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
 115         trace-buffer-size set and show commands.
 116         (Tracepoint Packets): Document QTBuffer:size.
 117         (General Query Packets): Document QTBuffer:size.
 118
 119 2013-02-21  Tom Tromey  <tromey@redhat.com>
 120
 121         * gdb.texinfo: Remove bad @syncodeindex.
 122         (Values From Inferior, Types In Python, Inferiors In Python)
 123         (Events In Python, Threads In Python, Frames In Python, Blocks In
 124         Python, Symbols In Python, Symbol Tables In Python): Remove
 125         @tables.
 126         (Packets, General Query Packets, Tracepoint Packets)
 127         (Host I/O Packets): Use @w{} for empty @item.
 128
 129 2013-02-20  Siva Chandra Reddy <sivachandra@google.com>
 130
 131         * gdb.texinfo (Architectures In Python): Add description about
 132         the new method gdb.Architecture.disassemble.
 133
 134 2013-02-15  Pedro Alves  <pedro@codesourcery.com>
 135             Hafiz Abid Qadeer  <abidh@codesourcery.com>
 136
 137         * gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
 138         Document the "trace-file" field.
 139
 140 2013-02-07  Doug Evans  <dje@google.com>
 141
 142         * gdb.texinfo (Machine Code): Clarify argument to disassemble
 143         command.
 144
 145 2013-02-06  Yao Qi  <yao@codesourcery.com>
 146
 147         * gdb.texinfo (GDB/MI Async Records): Document new MI
 148         notification "=tsv-modified".  Update the document of MI
 149         notification "=tsv-created".
 150         * observer.texi (GDB Observers): New observer tsv_modified.
 151         Update observer tsv_created and tsv_delete.
 152
 153 2013-02-05  Yufeng Zhang  <yufeng.zhang@arm.com>
 154
 155         * gdb.texinfo (AArch64 Features): New section; document
 156         org.gnu.gdb.aarch64.core and org.gnu.gdb.aarch64.fpu.
 157         (Architectures): Add new AArch64 section to document AArch64
 158         architecture specific commands.
 159         (ABI): Add description of the new OS ABI "Newlib" and its influence
 160         on the longjmp handling.
 161
 162 2013-02-03  Eldar Gaynetdinov <hal9000ed2k@gmail.com>
 163             Jan Kratochvil  <jan.kratochvil@redhat.com>
 164
 165         * gdb.texinfo (Backtrace): Added description of 'filename-display'
 166         variable in 'set/show backtrace' section.
 167
 168 2013-01-31  Tom Tromey  <tromey@redhat.com>
 169
 170         * gdb.texinfo (Target Commands): Fix typo.
 171
 172 2013-01-23  Siva Chandra Reddy  <sivachandra@google.com>
 173
 174         * doc/gdb.texinfo (Architectures In Python): New sub-sub-section
 175         describing the gdb.Architecture class.
 176         (Frames In Python): Add description about the new method
 177         gdb.Frame.architecture().
 178
 179 2013-01-23  Doug Evans  <dje@google.com>
 180
 181         * gdb.texinfo (Index Section Format): Document .gdb_index version 8.
 182
 183 2013-01-21  Marc Khouzam  <marc.khouzam@ericsson.com>
 184
 185         * gdb.texinfo (GDB/MI Breakpoint Commands): Document new
 186         'thread-groups' field when printing a breakpoint in MI.
 187
 188 2012-01-17  Sanjoy Das <sanjoy@playingwithpointers.com>
 189         * gdb.texinfo (Using JIT Debug Info Readers): Change documentation
 190         to reflect that jit-reader-load now supports absolute file-names.
 191
 192 2013-01-16  Tom Tromey  <tromey@redhat.com>
 193
 194         * gdb.texinfo (Set Catchpoints): Document "catch signal".
 195         (Signals): Likewise.
 196
 197 2013-01-16  Tom Tromey  <tromey@redhat.com>
 198
 199         * gdb.texinfo (GDB/MI Breakpoint Information): Document
 200         "catch-type" field.
 201         (GDB/MI Catchpoint Commands): Add "catch-type" to examples.
 202
 203 2013-01-07  Tom Tromey  <tromey@redhat.com>
 204
 205         * gdb.texinfo (Mode Options): Don't mention -epoch.
 206         (Data, Emacs): Remove obsolete comments.
 207
 208 2013-01-02  Tom Tromey  <tromey@redhat.com>
 209
 210         * gdb.texinfo (GDB/MI Output Records): Update menu.
 211         (GDB/MI Breakpoint Information): New node.
 212         (GDB/MI Breakpoint Commands) <-break-info>: Link to new node.
 213         <-break-insert>: Likewise.
 214
 215 2012-12-31  Yao Qi  <yao@codesourcery.com>
 216
 217         * gdb.texinfo (Remote Non-Stop): Move paragraphs to ...
 218         (Packets): Move "vStopped" packet to ...
 219         (Notification Packets): ... here.  Describe the components
 220         of notification.  Add a table of supported notifications.
 221         Add an example on the process of he async notification.
 222
 223 2012-12-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
 224
 225         * gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
 226         present.
 227         (GDB/MI File Commands) (-file-list-exec-source-files): Make the
 228         fullname output always present.
 229
 230 2012-12-23  Pierre Muller  <muller@sourceware.org>
 231
 232         * gdbint.texinfo (Function prototypes): Require use of "extern"
 233         modifier for function prototypes in headers.
 234
 235 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 236
 237         * refcard.tex: Update copyright notice to GPL v3 or later.
 238         Update contact info.
 239
 240 2012-12-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
 241
 242         * gdbint.texinfo (Coding Standards) (C Usage): New rule for 0 vs. NULL.
 243
 244 2012-12-15  Yao Qi  <yao@codesourcery.com>
 245
 246         * gdb.texinfo (Debugging Output): Document 'set debug
 247         notification' and 'show debug notification'.
 248
 249 2012-12-15  Yao Qi  <yao@codesourcery.com>
 250
 251         * gdb.texinfo (Listing Tracepoints): New item and example about
 252         'installed on target' output.
 253         Add more in the example about 'installed on target'.
 254         (GDB/MI Breakpoint Commands): Doc about 'installed field.
 255
 256 2012-12-14  Tom Tromey  <tromey@redhat.com>
 257
 258         * gdb.texinfo (SVR4 Process Information): Mention core files.
 259
 260 2012-12-12 Mircea Gherzan <mircea.gherzan@intel.com>
 261
 262         * gdb.texinfo (GDB/MI Catchpoint Commands): New section.
 263
 264 2012-12-11  Pedro Alves  <palves@redhat.com>
 265
 266         * gdb.texinfo: Remove all mentions of Unixware throughout.
 267
 268 2012-12-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
 269
 270         * gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
 271
 272 2012-11-29  Tom Tromey  <tromey@redhat.com>
 273
 274         * gdb.texinfo (SVR4 Process Information): Document missing
 275         "info proc" subcommands.
 276
 277 2012-11-29  Yao Qi  <yao@codesourcery.com>
 278
 279         PR gdb/1477.
 280         * gdb.texinfo (Print Settings): Correct the default 'demangle-style'
 281         to 'auto' instead of 'gnu'.
 282
 283 2012-11-26  Tom Tromey  <tromey@redhat.com>
 284
 285         * gdb.texinfo (MiniDebugInfo): New node.
 286         (GDB Files): Update.
 287
 288 2012-11-16  Doug Evans  <dje@google.com>
 289
 290         * gdb.texinfo (System-wide configuration): If the system-wide init
 291         file lives in the data-directory, and --data-directory is provided,
 292         look for it there.
 293
 294 2012-11-15  Tom Tromey  <tromey@redhat.com>
 295
 296         * gdb.texinfo (Signaling): Fix typo.
 297
 298 2012-11-13  Giuseppe Montalto  <giuseppe.montalto@st.com>
 299
 300         * gdb.texinfo (GDB/MI Data Manipulation): Document new optional
 301         parameter "count" of -data-write-memory-bytes, and add an example.
 302
 303 2012-11-12  Tom Tromey  <tromey@redhat.com>
 304
 305         * gdb.texinfo (Symbols): Document "info type-printers",
 306         "enable type-printer" and "disable type-printer".
 307         (Python API): Add new node to menu.
 308         (Type Printing API): New node.
 309         (Progspaces In Python): Document type_printers field.
 310         (Objfiles In Python): Likewise.
 311         (gdb.types) <get_type_recognizers, apply_type_recognizers,
 312         register_type_printer, TypePrinter>: Document.
 313
 314 2012-11-12  Tom Tromey  <tromey@redhat.com>
 315
 316         * gdb.texinfo (Symbols): Document "set print type methods",
 317         "set print type typedefs", and flags to ptype and whatis.
 318
 319 2012-11-09  Andrew Burgess  <aburgess@broadcom.com>
 320
 321         * gdb.texinfo (GDB/MI Data Manipulation): Add fullname field to
 322         the example -data-disassemble output.  Extend the description of
 323         the -data-disassemble results to document all fields.  Document
 324         the cli disassemble command as being related to -data-disassemble.
 325
 326 2012-11-09  Yao Qi  <yao@codesourcery.com>
 327
 328         PR gdb/14777.
 329         * gdb.texinfo (OS Information): Remove doc on command
 330         'info udot'.
 331
 332 2012-11-08  Joel Brobecker  <brobecker@adacore.com>
 333
 334         * gdb.texinfo (Startup): Minor rewording, and clarify scope of
 335         gdb.ini warning for Windows port.
 336
 337 2012-11-08  Yao Qi  <yao@codesourcery.com>
 338
 339         * gdb.texinfo (Search): Add kindex for 'fo'.
 340
 341 2012-11-05  Tom Tromey  <tromey@redhat.com>
 342
 343         PR python/14802:
 344         * gdb.texinfo (Functions In Python): Add example.
 345
 346 2012-11-03  Yao Qi  <yao@codesourcery.com>
 347
 348         * observer.texi (GDB Observers): Remove observer
 349         'tracepoint_modified', 'tracepoint_created' and
 350         'tracepoint_deleted'.
 351
 352 2012-10-26  Tom Tromey  <tromey@redhat.com>
 353
 354         * gdb.texinfo (General Query Packets): Use @itemx for QAgent.
 355
 356 2012-10-25  Tom Tromey  <tromey@redhat.com>
 357
 358         * gdb.texinfo (General Query Packets): Use @itemx.
 359
 360 2012-10-17  Yao Qi  <yao@codesourcery.com>
 361
 362         * observer.texi (GDB Observers): Update observer
 363         'memory_changed'.
 364         * gdb.texinfo (GDB/MI Async Records): Document for
 365         "memory-changed" notification.
 366
 367 2012-10-15  Doug Evans  <dje@google.com>
 368
 369         * gdb.texinfo (Mode Options): Document -nh.
 370         Elaborate on docs for -nx.
 371
 372 2012-09-26  Siddhesh Poyarekar  <siddhesh@redhat.com>
 373
 374         * observer.texi (memory_changed): Expand parameter LEN to ssize_t.
 375
 376 2012-09-21  Yao Qi  <yao@codesourcery.com>
 377             Pedro Alves  <palves@redhat.com>
 378
 379         * gdb.texinfo (GDB/MI Async Records): Document notification
 380         'record-started' and 'record-stopped'.
 381         * observer.texi (GDB Observers): New observer 'record-changed'.
 382
 383 2012-09-19  Thomas Schwinge  <thomas@codesourcery.com>
 384
 385         * gdb.texinfo: Document the removal of SH's 'regs' command.
 386
 387 2012-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>
 388
 389         * gdb.texinfo (jump): Mention new alias `j' for `jump'.
 390
 391 2012-09-18  Yao Qi  <yao@codesourcery.com>
 392
 393         * gdb.texinfo (GDB/MI Async Records): Document new MI
 394         notifications '=tsv-created' and '=tsv-deleted'.
 395         * observer.texi (GDB Observers): New observer tsv_created and
 396         tsv_deleted.
 397
 398 2012-09-18  Yao Qi  <yao@codesourcery.com>
 399
 400         * observer.texi (GDB Observers): New observer 'traceframe_changed'.
 401         * gdb.texinfo (GDB/MI Async Records): Mention new MI notification
 402         '=traceframe-changed'.
 403
 404 2012-09-17  Yao Qi  <yao@codesourcery.com>
 405
 406         * gdb.texinfo (List): Describe the meaning of 0 and -1 in
 407         'set listsize'.
 408
 409 2012-09-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
 410             Eli Zaretskii  <eliz@gnu.org>
 411
 412         * gdbint.texinfo (Defining Other Architecture Features): Clarify *pcptr
 413         encoding for gdbarch_breakpoint_from_pc, bp_addr for
 414         gdbarch_push_dummy_call and bp_addr for gdbarch_push_dummy_code.
 415
 416 2012-08-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
 417
 418         * gdb.texinfo (objfile-gdb.py file): New paragraph for .exe stripping.
 419
 420 2012-08-23  Khoo Yit Phang <khooyp@cs.umd.edu>
 421
 422         Document how to return from "python-interactive" to GDB.
 423         * gdb.texinfo (Python Commands): Update documentation.
 424
 425 2012-08-22  Khoo Yit Phang <khooyp@cs.umd.edu>
 426
 427         Add a new "python-interactive" command that starts a standard
 428         Python interactive prompt with "pi" as alias, and add "py" as
 429         an alias to "python".
 430         * gdb.texinfo (Python Commands): Document the new commands.
 431
 432 2012-08-22  Tom Tromey  <tromey@redhat.com>
 433
 434         * gdbint.texinfo (Host Definition): Remove documentation for
 435         SIGWINCH_HANDLER and SIGWINCH_HANDLER_BODY.
 436
 437 2012-08-17  Keith Seitz  <keiths@redhat.com>
 438
 439         PR c++/13356
 440         * gdb.texinfo (Type and Range Checking): Remove warning.
 441         Remove spurious commas.
 442         Update text and examples for re-implementation of set/show
 443         check type.
 444         (C and C++ Type and Range Checks): Likewise.
 445
 446 2012-08-16  Yao Qi  <yao@codesourcery.com>
 447
 448         * gdb.texinfo (Types In Python): Mention gdb.TYPE_CODE_BITSTRING
 449         is deprecated.
 450
 451 2012-08-13  Doug Evans  <dje@google.com>
 452
 453         * gdb.texinfo (Convenience Vars): Update text for "show convenience"
 454         to include functions.
 455
 456 2012-08-10  Doug Evans  <dje@google.com>
 457
 458         * gdb.texinfo (Convenience Funs): New node.
 459         (Types In Python): Document Type.vector.
 460
 461 2012-08-09  Yao Qi  <yao@codesourcery.com>
 462
 463         * observer.texi: New observer command_param_changed.
 464         * gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'.
 465
 466 2012-08-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
 467
 468         * gdbint.texinfo (Debugging GDB): In section
 469         'Debugging @value{GDBN} with itself' change .gdbinit for gdb-gdb.gdb.
 470         Mention also gdb-gdb.py.
 471
 472 2012-08-07  Yao Qi  <yao@codesourcery.com>
 473
 474         Revert the folloing patch:
 475         2012-08-06  Yao Qi  <yao@codesourcery.com>
 476         * gdb.texinfo (Remote Configuration): Add kindex for 'set
 477         remote hardware-watchpoint-limit' and 'set
 478         remote hardware-breakpoint-limit'.
 479
 480 2012-08-06  Nathaniel Flath  <flat0103@gmail.com>
 481
 482         * gdb.texinfo (Working Directory): Added information about new
 483         default argument for 'cd' command.
 484
 485 2012-08-06  Yao Qi  <yao@codesourcery.com>
 486
 487         * gdb.texinfo (Remote Configuration): Add kindex for 'set
 488         remote hardware-watchpoint-limit' and 'set
 489         remote hardware-breakpoint-limit'.
 490
 491 2012-08-06  Yao Qi  <yao@codesourcery.com>
 492
 493         Fix PR14371.
 494
 495         * gdb.texinfo (GDB/MI Async Records): Fix the doc for
 496         '=breakpoint-deleted'.
 497
 498 2012-08-02  Yao Qi  <yao@codesourcery.com>
 499
 500         * gdb.texinfo (Native): Remove node Neutrino.
 501
 502 2012-07-27  Yao Qi  <yao@codesourcery.com>
 503
 504         * gdb.texinfo (IPA Protocol Commands): Document new command
 505         'close'.
 506
 507 2012-07-25  Tom Tromey  <tromey@redhat.com>
 508
 509         * gdb.texinfo (Maintenance Commands): Document maint info bfds.
 510
 511 2012-07-20  Doug Evans  <dje@google.com>
 512
 513         * gdb.texinfo (Mode Options): Delete --use-deprecated-index-sections.
 514         (Index Files): Document how to control the use of deprecated index
 515         sections.
 516         (Index Section Format): Replace --use-deprecated-index-sections with
 517         "set use-deprecated-index-sections on".
 518
 519 2012-07-12  Eli Zaretskii  <eliz@gnu.org>
 520
 521         * gdbint.texinfo: Remove @syncodeindex directives that put all the
 522         indices into a single node "Index".  Instead, join function and
 523         variable indices into a single index, separate from the concept
 524         index.  Requested in
 525         http://sourceware.org/ml/gdb-patches/2012-07/msg00146.html.
 526         (Top): Update the top-level menu: instead of one "Index" there are
 527         now separate entries "Concept Index" and "Function and Variable
 528         Index".
 529         (Concept Index, Function and Variable Index): New nodes.
 530         (Index): Node deleted.
 531
 532 2012-07-05  Hui Zhu  <hui_zhu@mentor.com>
 533
 534         * gdb.texinfo (Maintenance Commands): Change help for "maint agent"
 535         and "maint agent-eval".
 536
 537 2012-07-03  Eli Zaretskii  <eliz@gnu.org>
 538
 539         * gdb.texinfo: Separate the index into 2 indices, cp and fn, to
 540         avoid file-name clashes between Index.html and index.html on
 541         case-insensitive filesystems.  See the discussion starting in
 542         http://sourceware.org/ml/gdb-patches/2012-06/msg00457.html for the
 543         details of the problem.
 544         (Top): Update the master menu for the above.
 545         (Concept Index, Command and Variable Index): New nodes, instead of
 546         the old "Index" node that was deleted.  All cross-references
 547         updated.
 548
 549 2012-07-02  Stan Shebs  <stan@codesourcery.com>
 550
 551         * gdb.texinfo (Dynamic Printf): Mention agent style and
 552         disconnected dprintf.
 553         (Maintenance Commands): Describe maint agent-printf.
 554         (General Query Packets): Mention BreakpointCommands feature.
 555         (Packets): Document commands extension to Z0 packet.
 556         * agentexpr.texi (Bytecode Descriptions): Document printf
 557         bytecode.
 558
 559 2012-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
 560
 561         * gdb.texinfo (File Options): Change -ix and -iex commands that apply
 562         only after gdbinit files.
 563         (Startup): Move -iex and -iex commands down after gdbinit files.
 564
 565 2012-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
 566
 567         * gdb.texinfo (Auto-loading safe path): Note the shell wildcard
 568         possibility.
 569
 570 2012-06-29  Tom Tromey  <tromey@redhat.com>
 571
 572         * gdb.texinfo (Index Section Format): Update for version 7.
 573
 574 2012-06-28  Stan Shebs  <stan@codesourcery.com>
 575
 576         * gdb.texinfo (Miscellaneous GDB/MI Commands): Update -info-os
 577         example, add note about title column.
 578
 579 2012-06-26  Siva Chandra Reddy  <sivachandra@google.com>
 580
 581         * gdb.texinfo (Symbol Tables In Python): Add description about
 582         the new 'last' attribute of gdb.Symtab_and line.
 583
 584 2012-06-26  Siva Chandra Reddy  <sivachandra@google.com>
 585
 586         * gdb.texinfo (Symbol Tables In Python): Correct the description
 587         of the 'pc' attribute of gdb.Symtab_and_line.
 588
 589 2012-06-26  Doug Evans  <dje@google.com>
 590
 591         * gdb.texinfo (Debugging Output): Document debug options dwarf2-read
 592         and symtab-create.
 593
 594 2012-06-25  Keith Seitz  <keiths@redhat.com>
 595
 596         * gdb.texinfo (GDB/MI Breakpoint Commands): Remove "-r" option
 597         from example.  Remove "rbreak" from list of corresponding
 598         gdb commands.
 599
 600 2012-06-23  Doug Evans  <dje@google.com>
 601
 602         * gdb.texinfo (Index Section Format): Document version 7 format.
 603
 604 2012-06-22  Yao Qi  <yao@codesourcery.com>
 605
 606         * gdb.texinfo: Add missing cindex for some packets.
 607
 608 2012-06-20  Keith Seitz  <keiths@redhat.com>
 609
 610         * gdb.texinfo (GDB/MI Breakpoint Commands): Re-order options
 611         for -break-insert and document -p.
 612
 613 2012-06-20  Yao Qi  <yao@codesourcery.com>
 614
 615         * gdb.texinfo (Inferiors In Python): Replace "gdb.read_memory"
 616         and "gdb.write_memory" with "Inferior.read_memory" and
 617         "Inferior.write_memory".
 618
 619 2012-06-15  Patrice Dumas  <pertusus@free.fr>  (tiny change)
 620
 621         * gdb.texinfo (Summary): Add a link to "Free Documentation".
 622         (Free Documentation): Add @node line.
 623         (Continuing and Stepping) <advance location>: Use @item instead of
 624         @itemx.
 625         (Reverse Execution) <set exec-direction reverse>: Use @item instead of
 626         @itemx.
 627         (Embedded Processors): Put the link to "PA" to its correct place,
 628         according to document structure.
 629         (Python API): Put the link to "Lazy Strings In Python" to its
 630         correct place.
 631         (Index): Use @@ in @tex block to get a literal @.
 632
 633         * gdbint.texinfo: Fix the @subtitle line.
 634
 635         * stabs.texinfo (Top): Put the link to "Symbol Types Index" to its
 636         correct place.
 637
 638 2012-06-08  Yao Qi  <yao@codesourcery.com>
 639
 640         * gdb.texinfo (In-Process Agent): Add 'In-Process Agent
 641         Protocol'.
 642         (In-Process Agent Protocol, IPA Protocol Objects)
 643         (IPA Protocol Commands): New nodes.
 644         (Tracepoint Packets): Add anchors.
 645
 646 2012-06-06  Thomas Schwinge  <thomas@codesourcery.com>
 647
 648         * gdb.texinfo: Document the deprecation of SH's 'regs' command.
 649
 650 2012-06-06  Yao Qi  <yao@codesourcery.com>
 651
 652         * gdb.texinfo: Update copyright year.
 653
 654 2012-05-23  Stan Shebs  <stan@codesourcery.com>
 655             Kwok Cheung Yeung  <kcy@codesourcery.com>
 656
 657         * gdb.texinfo (Miscellaneous GDB/MI Commands): Document -info-os.
 658
 659 2012-05-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
 660
 661         * gdb.texinfo (Separate Debug Files): New anchor debug-file-directory.
 662         Mention also --with-separate-debug-dir.
 663         (Auto-loading): Prepend $debugdir in the sample output.
 664         (Auto-loading safe path): Likewise.  Mention also $debugdir for the
 665         auto-load safe-path variable.
 666         (objfile-gdb.py file): Remove the extra debug-file-directory paragraph.
 667         Mention also $debugdir for 'set auto-load scripts-directory'.
 668
 669 2012-05-19  Eli Zaretskii  <eliz@gnu.org>
 670
 671         * gdb.texinfo (Continuing and Stepping, Selection, Byte Order)
 672         (MIPS Embedded, MIPS, MIPS Register packet Format)
 673         (Target Descriptions, MIPS Features): Use @acronym{MIPS} where
 674         appropriate.
 675
 676 2012-05-18  Sandra Loosemore  <sandra@codesourcery.com>
 677             Maciej W. Rozycki  <macro@codesourcery.com>
 678
 679         * gdb.texinfo (MIPS): Document "set mips compression" and "show
 680         mips compression".
 681         (MIPS Breakpoint Kinds): New subsubsection.
 682
 683 2012-05-18  Eli Zaretskii  <eliz@gnu.org>
 684
 685         * gdb.texinfo (Architecture-Specific Protocol Details): Define
 686         nodes for subsections.  Add @acronym mark-ups and adjust
 687         formatting.
 688
 689 2012-05-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
 690
 691         Rename $ddir to $datadir.
 692         * gdb.texinfo (Auto-loading, Auto-loading safe path)
 693         (objfile-gdb.py file): Rename $ddir to $datadir.
 694
 695 2012-05-18  Tom Tromey  <tromey@redhat.com>
 696
 697         * gdb.texinfo (Print Settings): Document 'set print symbol'.
 698
 699 2012-05-14  Stan Shebs  <stan@codesourcery.com>
 700
 701         * gdb.texinfo (Dynamic Printf): New subsection.
 702
 703 2012-05-13  Siva Chandra Reddy  <sivachandra@google.com>
 704
 705         * gdb.texinfo (Basic Python): Add description about the function
 706         gdb.find_pc_line
 707
 708 2012-05-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
 709             Eli Zaretskii  <eliz@gnu.org>
 710
 711         * gdb.texinfo (Separate Debug Files): Use plural form for global
 712         debugging information directory.
 713
 714 2012-05-11  Stan Shebs  <stan@codesourcery.com>
 715             Kwok Cheung Yeung  <kcy@codesourcery.com>
 716
 717         * gdb.texinfo (Operating System Auxiliary Information): Document new
 718         'info os' subcommands.
 719
 720 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 721
 722         * gdb.texinfo (Auto-loading, Init File in the Current Directory)
 723         (libthread_db.so.1 file, objfile-gdb.gdb file, objfile-gdb.py file)
 724         (dotdebug_gdb_scripts section): Add reference
 725         to 'Auto-loading safe path'.
 726
 727 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 728
 729         Implement multi-component --with-auto-load-dir.
 730         * gdb.texinfo (Auto-loading): New references
 731         for 'set auto-load scripts-directory'
 732         and 'show auto-load scripts-directory'.
 733         (Auto-loading safe path): Describe the new default.  Move $ddir
 734         substituation reference to 'objfile-gdb.py file'.
 735         (objfile-gdb.py file): Describe script-name alias.  Change real-name to
 736         script-name.  Describe new 'set auto-load scripts-directory'
 737         and 'show auto-load scripts-directory'.
 738
 739 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
 740
 741         Provide $ddir substitution for --with-auto-load-safe-path.
 742         * gdb.texinfo (Auto-loading): Replace /usr/local by $ddir/auto-load.
 743         (Auto-loading safe path): Likewise.  Mention the default value,
 744         $ddir substitution, --with-auto-load-safe-path and
 745         --without-auto-load-safe-path.
 746         * observer.texi (gdb_datadir_changed): New.
 747
 748 2012-05-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
 749
 750         * gdb.texinfo (Auto-loading): Wrap too long lines in @smallexample.
 751         Twice.
 752
 753         * gdb.texinfo (Separate Debug Files, Auto-loading safe path): Replace
 754         directory separator by path separator.
 755
 756 2012-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
 757
 758         * gdb.texinfo (Auto-loading safe path): Make 'directories'
 759         for 'set auto-load safe-path' optional.  Mention if it is omitted.
 760         Change disabling security protection condition to "/", twice.
 761
 762 2012-05-03  Siva Chandra Reddy  <sivachandra@google.com>
 763
 764         * gdb.texinfo (Symbol Tables In Python): Add documentation about
 765         the new methods global_block and static_block on gdb.Symtab
 766         objects.
 767
 768 2012-05-02  Siva Chandra Reddy  <sivachandra@google.com>
 769
 770         * gdb.texinfo (Blocks In Python): Add a note saying that future
 771         improvements to GDB and its infrastructure can move symbols
 772         across blocks within a symbol table.
 773
 774 2012-04-29  Yao Qi  <yao@codesourcery.com>
 775
 776         * gdb.texinfo (Architectures): Remove menu entry `A29K'.
 777         (A29K): Remove.
 778
 779 2012-04-27  Sergio Durigan Junior  <sergiodj@redhat.com>
 780             Tom Tromey  <tromey@redhat.com>
 781
 782         * gdb.texinfo (Static Probe Points): New entry, explaining SystemTap
 783         and generic static probe support on GDB.
 784
 785 2012-04-25  Doug Evans  <dje@google.com>
 786
 787         * gdb.texinfo (Go): Fix thinko.
 788
 789         * gdb.texinfo (Supported Languages): Add Go.
 790         (Go): New node.
 791
 792 2012-04-25  Yao Qi  <yao@codesourcery.com>
 793
 794         * gdbint.texinfo (Testsuite): New section `Board settings'.
 795
 796 2012-04-23  Jan Kratochvil  <jan.kratochvil@redhat.com>
 797
 798         * gdb.texinfo (Auto-loading safe path): Remove trailing [@dots{}].
 799         Three times.
 800
 801         * gdb.texinfo (Auto-loading safe path): Add trailing @dots{}.
 802         Three times.
 803
 804 2012-04-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
 805
 806         * gdb.texinfo (Auto-loading safe path): Replace @itemize @bullet
 807         by @table @asis.  Fix formatting of one item.
 808
 809 2012-04-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
 810
 811         * gdb.texinfo (Auto-loading verbose mode): Fix smallexample typo.
 812
 813 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
 814
 815         New option "set debug auto-load".
 816         * gdb.texinfo (Auto-loading): New menu item for auto-load verbose mode.
 817         (auto-load verbose mode): New node.
 818
 819 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
 820
 821         New option "set auto-load safe-path".
 822         * gdb.texinfo (Auto-loading): Extend the "show auto-load"
 823         and "info auto-load" examples for safe-path.  Put there also references
 824         for "set auto-load safe-path" and "show auto-load safe-path".
 825         New menu item for Auto-loading safe path.
 826         (Auto-loading safe path): New node.
 827         (Python Auto-loading): Update the expected output from "Missing"
 828         to "No".
 829
 830 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
 831
 832         auto-load: Implementation.
 833         * gdb.texinfo (Mode Options): New anchor for -nx.
 834         (Startup): New anchors for Option -init-eval-command,
 835         Home Directory Init File
 836         and Init File in the Current Directory during Startup.
 837         Mention set auto-load local-gdbinit with a reference.
 838         Change the sample code to "set auto-load python-scripts".
 839         (Threads): New anchor set libthread-db-search-path.
 840         Provide references to libthread_db.so.1 file.
 841         (Controlling GDB): New menu item for Auto-loading.
 842         (Auto-loading, Init File in the Current Directory)
 843         (libthread_db.so.1 file, objfile-gdb.gdb file): New nodes.
 844         (Python): Rename the menu item Auto-loading to Python Auto-loading.
 845         (Writing a Pretty-Printer, Objfiles In Python): Update the renamed
 846         reference.
 847         (Auto-loading): Rename to ...
 848         (Python Auto-loading): ... here.  Change "set auto-load-scripts" to
 849         "set auto-load python-scripts", new anchor for it.  Change
 850         "show auto-load-scripts" to "show auto-load python-scripts", new anchor
 851         for it.  Change "info auto-load-scripts"
 852         to "info auto-load python-scripts", new anchor for it.  Change "scripts"
 853         to "Python scripts".
 854
 855 2012-04-14  Anton Gorenkov <xgsa@yandex.ru>
 856
 857         PR mi/13393
 858         * gdb.texinfo (Print Settings): Extend the description for "set print
 859         object".
 860         (GDB/MI Variable Objects): Extend the description for -var-create and
 861         -var-list-children.
 862
 863 2012-04-11  Siva Chandra Reddy  <sivachandra@google.com>
 864
 865         * gdb.texinfo (Examining Data): Document the 'explore' command.
 866
 867 2012-03-28  Joel Brobecker  <brobecker@adacore.com>
 868
 869         * gdb.texinfo (GDB/MI Variable Objects): Document what happens
 870         to the children of a varobj and its update range when -var-update
 871         returns that the varobj's type changed.
 872
 873 2012-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
 874
 875         * gdb.texinfo (Auto-loading): Move @menu to the end of @node.
 876         Create two new links fir 'objfile-gdb.py file'
 877         and 'dotdebug_gdb_scripts section'.
 878
 879 2012-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
 880
 881         * gdb.texinfo (Auto-loading): Rename node reference
 882         '.debug_gdb_scripts section' to 'dotdebug_gdb_scripts section'.
 883         Twice.
 884         (.debug_gdb_scripts section): Rename the node ...
 885         (dotdebug_gdb_scripts section): ... here.
 886         (Maintenance Commands): Also rename this node reference.
 887
 888 2012-03-22  Siva Chandra Reddy  <sivachandra@google.com>
 889
 890         * gdb.texinfo (Python API/Values From Inferior): Add description
 891         about the new method Value.referenced_value.  Add description on
 892         how Value.dereference is different (and similar) to
 893         Value.referenced_value.
 894
 895 2012-03-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
 896
 897         * gdb.texinfo (File Options): Describe --init-command=FILE, -ix and
 898         --init-eval-command=COMMAND, -iex.
 899         (Startup): Describe -iex and -ix.  Simplify the example
 900         for "set auto-load-scripts off".
 901
 902 2012-03-16  Gary Benson  <gbenson@redhat.com>
 903
 904         PR breakpoints/10738
 905         * gdb.texinfo (Inline Functions): Remove the now-unnecessary @item
 906         stating that GDB cannot set breakpoints on inlined functions.
 907         (Mode Options): Document --use-deprecated-index-sections.
 908         (Index Section Format): Document new index section version format.
 909
 910 2012-03-15  Tom Tromey  <tromey@redhat.com>
 911
 912         * gdb.texinfo (Debugging C Plus Plus): Document "info vtbl".
 913
 914 2012-03-13  Doug Evans  <dje@google.com>
 915
 916         * gdb.texinfo (Help): Change apropos example to use "alias" instead
 917         of "reload".
 918         (Symbols): Delete docs for set/show symbol-reloading.
 919         * gdbint.texinfo (Defining Other Architecture Features): Delete
 920         SYMBOL_RELOADING_DEFAULT.
 921         * refcard.tex: Delete reference to symbol-reloading.
 922
 923 2012-03-07  Pedro Alves  <palves@redhat.com>
 924
 925         * gdb.texinfo (General Query Packets): Document new
 926         QProgramSignals packet.
 927         * gdb.texinfo (Remote configuration): Mention
 928         "program-signals-packet".
 929
 930 2012-03-05  Tristan Gingold  <gingold@adacore.com>
 931
 932         * gdb.texinfo (General Query Packets): Document xfer:uib:read.
 933
 934 2012-03-03  Yao Qi  <yao@codesourcery.com>
 935
 936         * gdb.texinfo (In-Process Agent): New node.
 937         Document new commands.
 938         (General Query Packets): Add packet `QAgent'.
 939
 940 2012-03-01  Maciej W. Rozycki  <macro@codesourcery.com>
 941
 942         * gdb.texinfo (MIPS Features): Add org.gnu.gdb.mips.dsp.
 943
 944 2012-03-01  Scott J. Goldman <scottjg@vmware.com>
 945
 946         * gdb.texinfo (Commands In Python): Put example python macro in
 947         COMMAND_USER category rather than COMMAND_OBSCURE.
 948         Document gdb.COMMAND_USER.
 949         (User-defined Commands): Update documentation to clarify
 950         "set/show max-user-call-depth" and "show user" don't apply to python
 951         commands.  Update documentation to clarify "help user-defined" may
 952         also include python commands defined as COMMAND_USER.
 953
 954 2012-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
 955
 956         * gdb.texinfo (Startup): Add option -ex description to the option -x
 957         description.
 958
 959 2012-02-24  Luis Machado  <lgustavo@codesourcery.com>
 960
 961         * gdb.texinfo (Setting Breakpoints): Mention and explain the
 962         condition-evaluation breakpoint parameter.
 963         Mention condition-evaluation mode being shown in "info break".
 964         (Break Conditions): Add description for target-side
 965         conditional breakpoints.
 966         (Remote Configuration): Mention conditional-breakpoints-packet.
 967         (Packets): Add cond-expr parameter to Z0/Z1 packets and explain
 968         cond-expr.
 969         (General Query Packets): Mention new ConditionalBreakpoint feature.
 970
 971 2012-02-22  Tom Tromey  <tromey@redhat.com>
 972
 973         * gdb.texinfo (Blocks In Python): Clarify block iteration.
 974
 975 2012-02-17  Tom Tromey  <tromey@redhat.com>
 976
 977         PR python/10753:
 978         * gdb.texinfo (objfile-gdb.py file): Fix location of auto-load
 979         directory.
 980
 981 2012-02-14  Stan Shebs  <stan@codesourcery.com>
 982
 983         * gdb.texinfo (Disabling Breakpoints): Document enable count.
 984
 985 2012-02-13  Pedro Alves  <palves@redhat.com>
 986
 987         * gdb.texinfo (MIPS boards): Refer to mips-elf instead of
 988         mips-idt-ecoff.
 989
 990 2012-02-09  Yao Qi  <yao@codesourcery.com>
 991
 992         * gdb.texinfo (Symbols In Python): Add missing `@end defvar'.
 993
 994 2012-02-07  Tom Tromey  <tromey@redhat.com>
 995
 996         * gdb.texinfo (Symbols In Python): Document Symbol.needs_frame and
 997         Symbol.value.
 998
 999 2012-02-07  Tom Tromey  <tromey@redhat.com>
1000
1001         * gdb.texinfo (Symbols In Python): Document Symbol.line.
1002
1003 2012-01-27  Thomas Schwinge  <thomas@codesourcery.com>
1004
1005         * gdb.textinfo (Packets): Move vCont paragraph to the correct place.
1006
1007 2012-01-24  Tom Tromey  <tromey@redhat.com>
1008
1009         * gdb.texinfo (Set Catchpoints): Document "catch load" and "catch
1010         unload".
1011         (Files): Mention new catch commands.
1012         (GDB/MI Async Records): Likewise.
1013
1014 2012-01-24  Gary Benson  <gbenson@redhat.com>
1015
1016         Delete #if 0'd out code.
1017         * gdb.texinfo (Frame Info): Remove "info catch".
1018
1019 2012-01-20  Ulrich Weigand  <ulrich.weigand@linaro.org>
1020
1021         * gdb.texinfo (Remote Configuration): Document
1022         "set remote hostio-readlink-packet" command.
1023         (General Query Packets): Document vFile:readlink packet.
1024
1025 2012-01-16  Tom Tromey  <tromey@redhat.com>
1026
1027         * gdb.texinfo (Specify Location): Document relative file name
1028         handling.
1029
1030 2012-01-16  Tom Tromey  <tromey@redhat.com>
1031
1032         * gdb.texinfo (gdb.printing): Document FlagEnumerationPrinter.
1033
1034 2012-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
1035             Eli Zaretskii  <eliz@gnu.org>
1036
1037         * gdbint.texinfo (Coding Standards): Require braces for two lines of
1038         code.
1039
1040 2012-01-11  Paul Hilfinger  <hilfingr@adacore.com>
1041
1042         * gdb.texinfo (Variables): Document use of :: for non-static
1043         variables.
1044
1045 2012-01-05  Joel Brobecker  <brobecker@adacore.com>
1046
1047         * gdbint.texinfo (Start of New Year Procedure): Update
1048         to replace use of copyright.sh by use of copyright.py.
1049
1050 2012-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
1051
1052         Remove the gdbtui binary.
1053         * all-cfg.texi (GDBTUI): Remove.
1054         * gdb.texinfo (Mode Options): Remove the GDBTUI reference.
1055         (TUI): Remove GDBTUI pindex.  Remove the GDBTUI reference.
1056         * gdbint.texinfo (Testsuite): Replace `gdbtui' by `gdb -tui'.
1057
1058 2011-12-23  Kevin Pouget  <kevin.pouget@st.com>
1059
1060         Introduce gdb.FinishBreakpoint in Python.
1061         * gdb.texinfo (Finish Breakpoints in Python): New subsection.
1062         (Python API): Add menu entry for Finish Breakpoints.
1063
1064 2011-12-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1065
1066         * gdbint.texinfo (Testsuite): Describe KFAIL and XFAIL in Writing
1067         tests.
1068
1069 2011-12-16  Doug Evans  <dje@google.com>
1070
1071         * gdb.texinfo (Server): Document -/stdio argument to gdbserver.
1072
1073 2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>
1074
1075         * gdb.texinfo (Python Commands): Remove "maint set/show print
1076         stack".  Add documentation for "set/show python print-stack".
1077
1078 2011-12-14  Pedro Alves  <pedro@codesourcery.com>
1079
1080         * gdb.texinfo (Implementing a Remote Stub): Explain that you
1081         should transfer control to the stub in the startup code instead of
1082         in main.  Mention the need to get past the initial breakpoint.
1083
1084 2011-12-06  Tom Tromey  <tromey@redhat.com>
1085
1086         * gdb.texinfo (Set Breaks): Update for new behavior.
1087
1088 2011-12-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
1089
1090         * gdb.texinfo (Requirements, Remote Protocol): Reference also `Library
1091         List Format for SVR4 Targets'.
1092         (General Query Packets): New item qXfer:libraries-svr4:read.
1093         (Library List Format for SVR4 Targets): New node.
1094
1095 2011-12-01  Tom Tromey  <tromey@redhat.com>
1096
1097         * gdb.texinfo (Writing a Pretty-Printer): Use append method, not
1098         add.
1099
1100 2011-11-22  Tom Tromey  <tromey@redhat.com>
1101
1102         * gdb.texinfo (GDB/MI Async Records): Document new *stopped
1103         reasons.
1104
1105 2011-11-20  Stan Shebs  <stan@codesourcery.com>
1106
1107         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
1108         note-related options and variables.
1109         (Tracepoint Packets): Document packet changes.
1110
1111 2011-11-20  Sanjoy Das  <sdas@igalia.com>
1112
1113         * gdb.texinfo (JIT Interface): Add documentation on writing and
1114         usind JIT debug info readers.
1115         (Custom Debug Info, Using JIT Debug Info Readers, Writing JIT
1116         Debug Info Readers): New nodes.
1117
1118 2011-11-18  Yao Qi  <yao@codesourcery.com>
1119
1120         * gdb.texinfo (Create and Delete Tracepoints): Mention pending
1121         tracepoint.
1122
1123 2011-11-15  Doug Evans  <dje@google.com>
1124
1125         * gdb.texinfo (Files): Document basenames-may-differ.
1126
1127 2011-11-14  Doug Evans  <dje@google.com>
1128
1129         * gdb.texinfo (Shell Commands): Document "!".
1130
1131 2011-11-14  Stan Shebs  <stan@codesourcery.com>
1132             Kwok Cheung Yeung  <kcy@codesourcery.com>
1133
1134         * gdb.texinfo (Create and Delete Tracepoints): Describe what is
1135         needed to get shorter fast tracepoints.
1136         (Tracepoint Packets): Document new qTMinFTPILen packet.
1137
1138 2011-11-14  Yao Qi  <yao@codesourcery.com>
1139
1140         * gdb.texinfo (Create and Delete Tracepoints): Describe changed
1141         behavior of tracepoint.
1142         (General Query Packets): New feature InstallInTrace.
1143         (Remote Configuration): Document "set remote
1144         install-in-trace-packet".
1145
1146 2011-11-12  Matt Rice  <ratmice@gmail.com>
1147
1148         * gdb.texinfo (C Preprocessor Macros): Remove info definitions.
1149         Add arguments to info macro.
1150
1151 2011-11-10  Tom Tromey  <tromey@redhat.com>
1152
1153         * gdb.texinfo (Compilation): Don't mention -gdwarf-2.  Link to GCC
1154         manual.
1155         (Variables): Don't mention -gdwarf-2.  Link to Compilation node.
1156         (Macros): Add a footnote.
1157         (C): Remove paragraph about compiler options.
1158         (C Constants): Mention wide character and string constants.
1159         (C Plus Plus Expressions): Update compiler option advice.  Mention
1160         using declarations.  Mention ADL.  Remove old HP compiler
1161         information.
1162
1163 2011-11-10  Tom Tromey  <tromey@redhat.com>
1164
1165         PR c++/9257:
1166         * gdb.texinfo (Print Settings): Add an extra note about the need
1167         for a vtable.
1168
1169 2011-11-08  Maciej W. Rozycki  <macro@codesourcery.com>
1170
1171         * gdb.texinfo (MIPS): Remove duplicate "auto" reference from
1172         "set mips abi" documentation.
1173
1174 2011-11-04  Doug Evans  <dje@google.com>
1175
1176         * gdb.texinfo (Maintenance Commands): Update docs of "maint time".
1177
1178 2011-11-03  Tom Tromey  <tromey@redhat.com>
1179
1180         * gdb.texinfo (Stopping): Add menu entry.
1181         (Continuing and Stepping): Restore @node.  Use @section, not
1182         @subsection.
1183
1184 2011-11-03  Maciej W. Rozycki  <macro@codesourcery.com>
1185
1186         * gdb.texinfo (Skipping Over Functions and Files): Remove node
1187         designation.  Fix "Specify Location" cross-reference.
1188
1189 2011-11-02  Stan Shebs  <stan@codesourcery.com>
1190
1191         * gdb.texinfo (Tracepoint Action Lists): Document collect/s.
1192         (General Query Packets): Describe tracenz feature.
1193         * agentexpr.texi (Bytecode Descriptions): Describe tracenz.
1194
1195 2011-10-28  Paul Koning  <paul_koning@dell.com>
1196
1197         * gdb.texinfo (gdb.types): Rename deepitems to deep_items.
1198
1199 2011-10-27  Kevin Pouget  <kevin.pouget@st.com>
1200
1201         * gdb.texinfo ((Frames In Python): Document
1202         gdb.FRAME_UNWIND_FIRST_ERROR contant.
1203
1204 2011-10-26  Paul Koning  <paul_koning@dell.com>
1205
1206         * gdb.texinfo (gdb.types): Document new deepitems function.
1207
1208 2011-10-25  Paul Koning  <paul_koning@dell.com>
1209
1210         PR python/13327
1211
1212         * gdb.texinfo (Values From Inferior): Add is_lazy attribute,
1213         fetch_lazy method.
1214
1215 2011-10-20  Phil Muldoon  <pmuldoon@redhat.com>
1216
1217         PR python/12656
1218
1219         * gdb.texinfo (Blocks In Python): Document is_static, is_global,
1220         global_block, static_block function.
1221
1222 2011-10-19  Tom Tromey  <tromey@redhat.com>
1223
1224         * gdb.texinfo (Commands In Python): Add missing "@"s.
1225
1226 2011-10-13  Kevin Pouget  <kevin.pouget@st.com>
1227
1228         PR python/13285 Document named constants for frame unwind stop reasons
1229         * gdb.texinfo (Frames In Python): Document gdb.FRAME_UNWIND_*
1230         constants.
1231
1232 2011-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
1233
1234         Fix compatibility with texinfo versions older than 4.12.
1235         * Makefile.in (MAKEINFO): Set to @MAKEINFO@.
1236         (MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
1237         (MAKEHTMLFLAGS): Use MAKEINFO_CMD.
1238         (gdb.info, gdbint.info, stabs.info, annotate.info): Use MAKEINFO_CMD.
1239         * gdb.texinfo (Tail Call Frames): Convert @arrow{} to @click, when possible.
1240         Make the conversion conditional on HAVE_MAKEINFO_CLICK, using variables
1241         CALLSEQ1A, CALLSEQ1B, CALLSEQ2A and CALLSEQ2B.
1242
1243 2011-10-09  Doug Evans  <dje@google.com>
1244
1245         * gdb.texinfo (Extending GDB): Document alias command.
1246
1247 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
1248
1249         Support @entry in input expressions.
1250         * gdb.texinfo (Variables): Describe @entry names suffix.
1251         (Print Settings): Add anchor for `set print entry-values'.
1252
1253 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
1254             Eli Zaretskii  <eliz@gnu.org>
1255
1256         Display @entry parameter values (without references).
1257         * gdb.texinfo (Tail Call Frames): Add anchor.  Add self tail call
1258         example.
1259         (Print Settings): New description of set print entry-values and show
1260         print entry-values.
1261
1262 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
1263             Eli Zaretskii  <eliz@gnu.org>
1264
1265         Recognize virtual tail call frames.
1266         * gdb.texinfo (Optimized Code): Add reference to Tail Call Frames.
1267         (Tail Call Frames): New node.
1268         (Frames In Python): Add gdb.TAILCALL_FRAME.
1269
1270 2011-10-07  Doug Evans  <dje@google.com>
1271
1272         * gdb.texinfo (gdb.printing): Document new `replace' arg to
1273         register_pretty_printer.
1274
1275 2011-10-07  Phil Muldoon  <pmuldoon@redhat.com>
1276
1277         PR python/12930
1278         PR python/12802
1279
1280         * gdb.texinfo (Breakpoints In Python): Clarify behavior in the
1281         stop method.
1282
1283 2011-10-07  Ulrich Weigand  <ulrich.weigand@linaro.org>
1284
1285         * gdb.texinfo (Starting your Program): "set disable-randomization"
1286         is no longer Linux-specific.
1287         (Remote Configuration): Document "set remote
1288         disable-randomization-packet".
1289         (General Query Packets): Document "QDisableRandomization" packet
1290         and add it to "qSupported" list.
1291
1292 2011-10-07  Kevin Pouget  <kevin.pouget@st.com>
1293
1294         Allow Python notification of new object-file loadings.
1295         * gdb.texinfo (Events In Python): Document `gdb.NewObjFileEvent'
1296         event type.
1297
1298 2011-10-04  Kevin Pouget  <kevin.pouget@st.com>
1299
1300         PR python/12691: Add the inferior to Python exited event
1301         * gdb.texinfo (Events In Python): Describe exited inferior attribute.
1302
1303 2011-10-03  Joel Brobecker  <brobecker@adacore.com>
1304
1305         * gdb.texinfo (GDB/MI Miscellaneous Commands): Minor
1306         rephasing.
1307
1308 2011-10-03  Joel Brobecker  <brobecker@adacore.com>
1309
1310         * gdb.texinfo (GDB/MI Ada Tasking Commands): New node.
1311         (GDB/MI Miscellaneous Commands): Add `ada-task-info'
1312         as possible feature returned by the `-list-features'
1313         command.
1314
1315 2011-09-28  Paul Koning  <paul_koning@dell.com>
1316
1317         * gdb.texinfo (gdb.Type): Document field access by dictionary
1318         key syntax.
1319
1320 2011-09-28  Yao Qi  <yao@codesourcery.com>
1321
1322         * gdb.texinfo (Files): Update options for `add-symbol-file'.
1323         Add one space after option `-s'.  Remove @r{} markup.
1324
1325 2011-09-27  Stan Shebs  <stan@codesourcery.com>
1326
1327         * gdb.texinfo (Tracepoint Action Lists): Document $_ret.
1328
1329 2011-09-16  Hui Zhu  <teawater@gmail.com>
1330
1331         * gdb.texinfo (Tracepoint Restrictions): Change *$esp@300
1332         to *(unsigned char *)$esp@300.
1333
1334 2011-09-15  Paul Koning  <paul_koning@dell.com>
1335
1336         * gdb.texinfo: Make style of Python functions and methods match
1337         the syntax of Python.  Also put class and module names explicitly
1338         on function, member, and variable names, matching Python
1339         documentation conventions.
1340
1341 2011-09-15  Kevin Pouget  <kevin.pouget@st.com>
1342
1343         PR Python/12692 Add gdb.selected_inferior() to Python interface.
1344         * gdb.texinfo (Inferiors In Python): Describe new
1345         gdb.selected_inferior() function.
1346
1347 2011-09-15  Kevin Pouget  <kevin.pouget@st.com>
1348
1349         Handle multiple breakpoint hits in Python interface:
1350         * gdb.texinfo (Events In Python): New function documentation:
1351         gdb.BreakpointEvent.breakpoints. Indicate that
1352         gdb.BreakpointEvent.breakpoint is now deprecated.
1353
1354 2011-09-04  Joel Brobecker  <brobecker@adacore.com>
1355
1356         * gdb.texinfo: Set EDITION to "Tenth" and change ISBN.
1357
1358 2011-08-25  Andrew Oakley  <andrew@ado.is-a-geek.net>
1359
1360         * gdb.texinfo (Types In Python): Document 'bitpos' for enums.
1361
1362 2011-08-17  Phil Muldoon  <pmuldoon@redhat.com>
1363
1364         * gdb.texinfo (Prompt): Add set/show extended-prompt
1365         documentation
1366         (Basic Python): Add prompt_hook anchor.
1367         (Python modules): Reword module text to reflect multiple modules.
1368         (gdb.prompt): Document gdb.prompt module.
1369
1370 2011-08-14  Yao Qi  <yao@codesourcery.com>
1371
1372         * gdb.texinfo (General Query Packets): Document qXfer:fdpic:read packet.
1373
1374 2011-08-14  Yao Qi  <yao@codesourcery.com>
1375
1376         * gdb.texinfo (Standard Target Features): Document C6x features.
1377         (TIC6x Features): New node.
1378
1379 2011-08-12  Doug Evans  <dje@google.com>
1380
1381         * gdb.texinfo (Symbols In Python): Document symbol.type.
1382
1383 2011-08-09  Phil Muldoon  <pmuldoon@redhat.com>
1384
1385         * gdb.texinfo (Python): Document command and function
1386         auto-loading.
1387
1388 2011-07-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
1389             Eli Zaretskii  <eliz@gnu.org>
1390
1391         * gdb.texinfo (whatis, ptype): Highlight their differences.  Describe
1392         typedefs unrolling.  Extend the sample code by an inner typedef and
1393         outer typedefs unrolling.
1394
1395 2011-07-26  Paul Pluzhnikov  <ppluzhnikov@google.com>
1396
1397         * gdb.texinfo (Caching Remote Data): Document {set,show} dcache
1398         size and line-size.
1399
1400 2011-07-21  Matt Rice  <ratmice@gmail.com>
1401
1402         PR macros/12999
1403         * gdb.texinfo (Macros): Add info definitions and info macros commands.
1404         Update text and cindex entries for info macro command.
1405
1406 2011-07-21  Phil Muldoon  <pmuldoon@redhat.com>
1407
1408         * observer.texi (GDB Observers): Add before_prompt observer.
1409         * gdb.texinfo (Basic Python): Add documentation for prompt
1410         substitution.
1411
1412 2011-07-11  Phil Muldoon  <pmuldoon@redhat.com>
1413
1414         PR python/12438
1415         * gdb.texinfo (Python Commands): Add deprecate note to maint
1416           set/show python print-stack.  Document set/show python
1417           print-backtrace.
1418
1419 2011-07-05  Thiago Jung Bauermann  <bauerman.ibm.com>
1420
1421         * gdb.texinfo: Fix typos.
1422
1423 2011-07-01  Tom Tromey  <tromey@redhat.com>
1424
1425         * gdb.texinfo (Debugging Output): Document set debug
1426         check-physname.
1427
1428 2011-06-29  Tom Tromey  <tromey@redhat.com>
1429
1430         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document
1431         breakpoint-notifications feature.
1432
1433 2011-06-29  Ulrich Weigand  <ulrich.weigand@linaro.org>
1434
1435         * gdb.texinfo (Target Description): Remove warning about
1436         possibly unstable format.
1437
1438 2011-06-03  Tom Tromey  <tromey@redhat.com>
1439
1440         * gdb.texinfo (GDB/MI Async Records): Document 'exit-code' field.
1441         (Events In Python): Note that exit_code is optional.
1442
1443 2011-05-17  Pedro Alves  <pedro@codesourcery.com>
1444
1445         * gdb.texinfo (Remote Protocol) <Overview>: Mention vCont is
1446         required for multi-threading support.
1447         (Remote Protocol) <Packets>: Mention that 'c', 's', 'C', 'S' and
1448         Hc are deprecated for multi-threading debugging.  Point readers at
1449         the vCont packet.
1450
1451 2011-05-15  Doug Evans  <dje@google.com>
1452
1453         * gdb.texinfo (Auto-loading): Document printing of missing scripts.
1454
1455 2011-05-13  Doug Evans  <dje@google.com>
1456
1457         * gdb.texinfo (Threads): Document $sdir,$pdir.
1458         (Server): Document $pdir exception.
1459
1460         * gdb.texinfo (Auto-loading): Document "info auto-load-scripts".
1461
1462         * gdb.texinfo (Threads): Clarify default value for
1463         libthread-db-search-path.
1464
1465         * gdb.texinfo (Completion): Update example.
1466         (Debugging Output): Delete `set/show debug lin-lwp-async'.
1467
1468 2011-05-12  Kwok Cheung Yeung  <kcy@codesourcery.com>
1469
1470         * gdb.texinfo: Document change in the behaviour of the enable and
1471         disable GDB commands when applied to tracepoints.
1472         Document the EnableDisableTracepoints remote stub feature.
1473         Document QTEnable and QTDisable in the list of tracepoint packets.
1474
1475 2011-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1476
1477         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Rename inc-hist.texinfo to
1478         hsuser.texi.
1479         * gdb.texinfo <!SYSTEM_READLINE>: Rename inc-hist.texinfo inclusion and
1480         comment to hsuser.texi.  Change rluser.texi name in the comment.
1481
1482 2011-05-10  Doug Evans  <dje@google.com>
1483
1484         * gdb.texinfo (Threads): If an empty path is provided for
1485         libthread-db-search-path it is reset to its default value.
1486         (Server): Ditto.
1487
1488 2011-05-09  Doug Evans  <dje@google.com>
1489
1490         * gdb.texinfo (Requirements): Fix typo.  Mention --with-iconv-bin.
1491
1492 2011-05-06  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
1493             Thiago Jung Bauermann  <bauerman@br.ibm.com>
1494
1495         Implement support for PowerPC BookE masked watchpoints.
1496         * gdb.texinfo (Set Watchpoints): Document mask parameter.
1497         (PowerPC Embedded): Mention support of masked watchpoints.
1498
1499 2011-05-03  Joel Brobecker  <brobecker@adacore.com>
1500
1501         * gdb.texinfo (In Memoriam): Replace litteral uses of `GDB' with
1502         `@value{GDBN}'.
1503
1504 2011-05-03  Joel Brobecker  <brobecker@adacore.com>
1505
1506         * gdb.texinfo (titlepage): Remove dedication.
1507         (In Memoriam): New appendix.
1508
1509 2011-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
1510             Eli Zaretskii  <eliz@gnu.org>
1511
1512         * gdb.texinfo (Index Section Format): Change the version to 5.
1513         Describe the different formula.
1514
1515 2011-04-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
1516             Eli Zaretskii  <eliz@gnu.org>
1517
1518         * gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
1519         for disconnected tracing.
1520         (Multi-Process Mode for @code{gdbserver}): Mention --multi and
1521         extended-remote relationship.  Mention --once.
1522         (TCP port allocation lifecycle of @code{gdbserver}): New.
1523
1524 2011-04-23  Eli Zaretskii  <eliz@gnu.org>
1525
1526         * gdb.texinfo (Server): Improve indexing.  Index all optional
1527         switches to gdbserver.
1528
1529 2011-04-20  Tom Tromey  <tromey@redhat.com>
1530
1531         * gdb.texinfo (Index Section Format): New node.
1532         (Top): Add new node to menu.
1533
1534 2011-04-20  Pedro Alves  <pedro@codesourcery.com>
1535
1536         * gdb.texinfo (Maintenance Commands): Document `maint print
1537         remote-registers'.
1538
1539 2011-04-20  Tom Tromey  <tromey@redhat.com>
1540
1541         * gdb.texinfo (Trace File Format): Move node later.
1542
1543 2011-04-19  Tom Tromey  <tromey@redhat.com>
1544
1545         * gdbint.texinfo (Register Information Functions): Remove
1546         duplicate "the".
1547         * gdb.texinfo (Emacs): Remove duplicate "to".
1548         (GDB/MI Variable Objects): Remove duplicate "the".
1549         (General Query Packets): Likewise.
1550
1551 2011-04-02  Joel Brobecker  <brobecker@adacore.com>
1552
1553         * gdb.texinfo (GDB/MI Output Records): Fix menu entry for
1554         "GDB/MI Ada Exception Information" node.
1555
1556 2011-04-01  Joel Brobecker  <brobecker@adacore.com>
1557
1558         * gdb.texinfo (GDB/MI Ada Exception Information): Document
1559         the "exception-name" field in the *stopped async record.
1560
1561 2011-03-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1562             Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
1563
1564         Implement support for PowerPC BookE ranged breakpoints.
1565         * gdb.texinfo (PowerPC Embedded): Document ranged breakpoints.
1566
1567 2011-03-28  Tom Tromey  <tromey@redhat.com>
1568
1569         * gdb.texinfo (Set Tracepoints): Fix typo.
1570
1571 2011-03-24  Tom Tromey  <tromey@redhat.com>
1572
1573         * gdb.texinfo (Specify Location): Document `function:label'
1574         linespec.
1575
1576 2011-03-18  Phil Muldoon  <pmuldoon@redhat.com>
1577
1578         PR python/12149
1579
1580         * gdb.texinfo (Basic Python): Update gdb.write and flush text.
1581
1582 2011-03-17  Phil Muldoon  <pmuldoon@redhat.com>
1583
1584         * gdb.texinfo (Blocks In Python): Add is_valid method description.
1585         (Inferiors In Python): Likewise.
1586         (Threads In Python): Likewise.
1587         (Symbols In Python): Likewise.
1588         (Objfiles In Python): Likewise.
1589         (Symbol Tables In Python): Likewise.
1590
1591 2011-03-15  Pedro Alves  <pedro@codesourcery.com>
1592
1593         * gdb.texinfo (Auto Display) <undisplay, enable display, disable
1594         display>: Explain that the commands accept number ranges.
1595
1596 2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>
1597
1598         * gdb.texinfo (Breakpoints In Python): Add description and example
1599         of Python stop function operation.
1600
1601 2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>
1602
1603         * gdb.texinfo (Parameters In Python): Document get_set_string and
1604         get_show_string methods.
1605
1606 2011-02-28  Jan Kratochvil  <jan.kratochvil@redhat.com>
1607
1608         * gdb.texinfo (Tracepoint Conditions): Fix missing parenthesis.
1609
1610         * gdb.texinfo (Starting and Stopping Trace Experiments): Fix
1611         circular-trace-buffer name.
1612
1613 2011-02-28  Joel Brobecker  <brobecker@adacore.com>
1614
1615         * gdb.texinfo (Inferiors and Programs): Fix small error introduced
1616         in the previous change.
1617
1618 2011-02-27  Michael Snyder  <msnyder@vmware.com>
1619
1620         * gdb.texinfo (Inferiors and Programs): Update commands to show
1621         that they can accept multiple arguments.
1622
1623 2011-02-24  Joel Brobecker  <brobecker@adacore.com>
1624
1625         Revert the following patch (code patch was not approved):
1626         2011-02-21  Hui Zhu  <teawater@gmail.com>
1627         * agentexpr.texi (bytecode descriptions): add printf.
1628         * gdb.texinfo (tracepoint action lists): add printf.
1629
1630 2011-02-23  Doug Evans  <dje@google.com>
1631
1632         * gdb.texinfo (Symbols In Python): Fix mention of C++, use C@t{++}.
1633
1634 2011-02-23  Michael Snyder  <msnyder@vmware.com>
1635
1636         * gdb.texinfo (Set Breaks): Add @dots{} to arguments of info break.
1637         (Set Watchpoints): Add @dots{} to argument of info watchpoints.
1638         (Listing Tracepoints): Add @dots{} to argument of info tracepoints.
1639
1640 2011-02-22  Doug Evans  <dje@google.com>
1641
1642         * gdb.texinfo (Symbols In Python): Document lookup_global_symbol.
1643         Clarify behaviour of lookup_symbol when `block' argument is omitted,
1644         add description of result, fix @defun formatting.
1645
1646 2011-02-21  Hui Zhu  <teawater@gmail.com>
1647
1648         * agentexpr.texi (Bytecode Descriptions): Add printf.
1649         * gdb.texinfo (Tracepoint Action Lists): Add printf.
1650
1651 2011-02-18  Tom Tromey  <tromey@redhat.com>
1652
1653         * agentexpr.texi (Bytecode Descriptions): Document pick and rot.
1654
1655 2011-02-14  Michael Snyder  <msnyder@vmware.com>
1656
1657         * gdb.texinfo (threads): Document argument for "info threads" cmd.
1658         Document new command "thread find".
1659
1660 2011-02-14  Michael Snyder  <msnyder@vmware.com>
1661
1662         * gdb.texinfo (Threads): Update example of new thread message.
1663
1664 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
1665
1666         * gdb.texinfo (Remote Configuration): Mention set/show remote
1667         traceframe-info.
1668         (Tools/Packages Optional for Building GDB): Mention that expat is
1669         used for traceframe info.
1670         (Remote Protocol) <Menu>: Add "Traceframe Info Format".
1671         (General Query Packets) <qSupported>: Describe the
1672         qXfer:traceframe-info:read feature.
1673         (qXfer::read): Describe qXfer:traceframe-info:read.
1674         (Traceframe Info Format): New section.
1675
1676 2011-02-04  Pedro Alves  <pedro@codesourcery.com>
1677
1678         * gdbint.texinfo (Formatting): Mention some formatting guidelines
1679         for casts and unary operators.
1680
1681 2011-02-04  Tom Tromey  <tromey@redhat.com>
1682
1683         * gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
1684         is not useful.
1685
1686 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
1687
1688         * gdb.texinfo: s/value optimized out/optimized out/g
1689
1690 2011-01-21  Joel Brobecker  <brobecker@adacore.com>
1691
1692         * gdb.texinfo (Other Misc Settings): Rework part of the
1693         documentation of the "set interactive mode" command.
1694
1695 2011-01-19  Tom Tromey  <tromey@redhat.com>
1696
1697         * gdb.texinfo (Threads): Document thread name output and `thread
1698         name' command.
1699         (Threads In Python): Document Thread.name attribute.
1700         (GDB/MI Thread Commands): Document thread attributes.
1701
1702 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
1703
1704         * gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
1705         changes in mi/mi-cmd-disas.c
1706
1707 2011-01-12  Tom Tromey  <tromey@redhat.com>
1708
1709         * gdb.texinfo (Threads): Remove duplicate text.  Update examples.
1710         Fix "thread apply" text.
1711
1712 2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
1713             Thiago Jung Bauermann  <bauerman@br.ibm.com>
1714
1715         Implement support for PowerPC BookE ranged watchpoints.
1716         * gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
1717         the "set powerpc exact-watchpoints" flag.
1718
1719 2011-01-07  Tom Tromey  <tromey@redhat.com>
1720
1721         * gdb.texinfo (Python API): Add descriptions to @menu items.
1722
1723 2011-01-06  Tom Tromey  <tromey@redhat.com>
1724
1725         * gdb.texinfo (Frames In Python): Document gdb.newest_thread.
1726
1727 2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>
1728
1729         * gdb.texinfo (Debugging Output): Document "set debug jit".
1730
1731 2011-01-06  Tom Tromey  <tromey@redhat.com>
1732
1733         PR python/12133:
1734         * gdb.texinfo (Frames In Python): Document various frame
1735         constants.
1736
1737 2011-01-05  Joel Brobecker  <brobecker@adacore.com>
1738
1739         * doc/agentexpr.texi, doc/all-cfg.texi, doc/annotate.texinfo,
1740         doc/gdb.texinfo, doc/gdbint.texinfo, doc/observer.texi,
1741         doc/refcard.tex, doc/stabs.texinfo: Copyright year update.
1742
1743 2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
1744
1745         * Makefile.in (diststuff): Remove gdb-cfg.texi and GDBvn.texi.
1746         (clean): Add GDBvn.texi.
1747
1748 2010-12-29  Joel Brobecker  <brobecker@adacore.com>
1749
1750         * gdb.texinfo (Ada Glitches): Remove paragraph describing the
1751         occasional case where the debugger prints an array address
1752         instead of the array itself.
1753
1754 2010-12-23  Pedro Alves  <pedro@codesourcery.com>
1755
1756         * gdb.texinfo (Packets) <read registers packet>: Document support
1757         for registers that were not collected.
1758
1759 2010-12-15  Doug Evans  <dje@google.com>
1760
1761         * gdb.texinfo (Startup): Document auto-loading of scripts during
1762         startup.
1763         (Auto-loading): Delete "maint set python auto-load on|off".
1764         Add "set auto-load-scripts on|off".
1765
1766 2010-12-07  Doug Evans  <dje@google.com>
1767
1768         * gdb.texinfo (Mode Options): Document -data-directory.
1769         (Data Files): Add reference to -data-directory.
1770
1771 2010-11-29  Doug Evans  <dje@google.com>
1772
1773         * gdb.texinfo (Pretty-Printer Introduction): Change
1774         printer-name:subprinter-name to printer-name;subprinter-name.
1775
1776 2010-11-29  Phil Muldoon  <pmuldoon@redhat.com>
1777
1778         PR python/12199
1779
1780         * gdb.texinfo (Breakpoints In Python): Document "delete" method.
1781
1782 2010-11-23  Tom Tromey  <tromey@redhat.com>
1783
1784         * gdb.texinfo (Top): Check SYSTEM_READLINE.
1785         (Editing): Likewise.
1786         (Command History): Likewise.
1787         (TUI Keys): Likewise.
1788         (Bug Reporting): Conditionally include rluser.texi and
1789         inc-history.texinfo.
1790         * Makefile.in (READLINE_TEXI_INCFLAG): New variable.
1791         (GDB_DOC_SOURCE_INCLUDES): Add comment.
1792         (GDBvn.texi): Set SYSTEM_READLINE when appropriate.
1793         (gdb.dvi): Use READLINE_TEXI_INCFLAG.
1794         (gdb.pdf): Likewise.
1795         (gdb.info): Likewise.
1796         (gdb/index.html): Likewise.
1797
1798 2010-11-23  Tom Tromey  <tromey@redhat.com>
1799
1800         * Makefile.in (Makefile): Run ../config.status.
1801         (distclean): Update.
1802         * configure: Remove.
1803         * configure.ac: Remove.
1804
1805 2010-11-12  Tom Tromey  <tromey@redhat.com>
1806
1807         * gdb.texinfo (Basic Python): Update.  Add xref.
1808         (Exception Handling): Document new exception classes.
1809         (Types In Python): Update.
1810         (Frames In Python): Update.
1811
1812 2010-11-11  Phil Muldoon  <pmuldoon@redhat.com>
1813
1814         * gdb.texinfo (Breakpoints In Python): Document "internal"
1815         parameter, and visible attribute.
1816
1817 2010-11-05  Doug Evans  <dje@google.com>
1818
1819         * gdb.texinfo (Source Path): Document "set directories".
1820
1821 2010-11-05  Ken Werner  <ken.werner@de.ibm.com>
1822
1823         * gdb.texinfo: (Summary) Add mention about OpenCL C language support.
1824         (OpenCL C): New node.
1825
1826 2010-11-02  Doug Evans  <dje@google.com>
1827
1828         * gdb.texinfo (Pretty Printing): Expand into three sections,
1829         introduction, example, and commands.
1830         (Python API): Delete section Disabling Pretty-Printers, merge into
1831         Selecting Pretty-Printers.
1832         (Writing a Pretty-Printer): New section.  Move the pretty-printer
1833         example here, and reformat to match python coding style.  Add a second
1834         example using the gdb.printing module.
1835         (Python modules): Add gdb.printing.
1836
1837 2010-10-29  Doug Evans  <dje@google.com>
1838
1839         * gdb.texinfo (Python): Fix long line.
1840
1841 2010-10-20  Doug Evans  <dje@google.com>
1842
1843         * gdbint.texinfo (Misc Guidelines): Renamed from Coding.
1844         All references updated.  Correct sections marked as subsections.
1845         (Coding Standards): New chapter.  Move the coding standard related
1846         subsections here.  Add section on Python coding standards.
1847
1848 2010-10-13  Doug Evans  <dje@google.com>
1849
1850         * gdb.texinfo (Python): Add "Python modules".
1851         (Types in Python): Add reference to gdb.types section.
1852         (Python modules): New node.
1853
1854 2010-10-11  Doug Evans  <dje@google.com>
1855
1856         * gdb.texinfo (Values From Inferior): Add reference to "Types in
1857         Python" from gdb.Value.type description.
1858
1859 2010-09-28  Joel Brobecker  <brobecker@adacore.com>
1860
1861         * gdb.texinfo (Ravenscar Profile): New node.
1862
1863 2010-09-22  Tom Tromey  <tromey@redhat.com>
1864
1865         * gdb.texinfo (Values From Inferior): Mention Value.__init__.
1866
1867 2010-09-22  Eli Zaretskii  <eliz@gnu.org>
1868
1869         * gdb.texinfo (Values From Inferior): Clarify that
1870         value.dynamic_type works only in C++ programs with RTTI.
1871
1872 2010-09-15  Paul Bolle  <pebolle@tiscali.nl>
1873
1874         * gdb.texinfo (Character Sets): Correctly reference host-charset
1875         in example.
1876
1877 2010-09-13  Tom Tromey  <tromey@redhat.com>
1878
1879         * gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-frames>:
1880         Document "fullname" and "from".
1881
1882 2010-09-01  Marc Khouzam  <marc.khouzam@ericsson.com>
1883
1884         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
1885         feature `reverse' output by -list-target-features.
1886
1887 2010-08-31  H.J. Lu  <hongjiu.lu@intel.com>
1888
1889         * gdb.texinfo (i386 Features): Remove an extra "@item".
1890
1891 2010-08-30  Tom Tromey  <tromey@redhat.com>
1892
1893         PR python/11792:
1894         * gdb.texinfo (Values From Inferior): Document dynamic_type.
1895
1896 2010-08-24  Daniel Jacobowitz  <dan@codesourcery.com>
1897
1898         * gdb.texinfo (ARM Features): Document
1899         org.gnu.gdb.arm.m-profile.
1900
1901 2010-08-23  Tom Tromey  <tromey@redhat.com>
1902
1903         PR python/11145:
1904         * gdb.texinfo (Values From Inferior): Document dynamic_cast and
1905         reinterpret_cast methods.
1906
1907 2010-08-23  Tom Tromey  <tromey@redhat.com>
1908
1909         PR python/11915:
1910         * gdb.texinfo (Types In Python): Document array method.
1911
1912 2010-08-18  Thiago Jung Bauermann  <bauerman@br.ibm.com>
1913
1914         * gdb.texinfo (PowerPC Embedded): Mention support for the DVC register.
1915
1916 2010-08-16   Tom Tromey  <tromey@redhat.com>
1917
1918         * gdb.texinfo (Set Watchpoints): Document -location option.
1919
1920 2010-08-13  Doug Evans  <dje@google.com>
1921
1922         * gdb.texinfo (.debug_gdb_scripts section): Fix typo.
1923
1924 2010-08-13  Vladimir Prus  <vladimir@codesourcery.com>
1925
1926         * gdb.texinfo (GDB/MI Data Manipulation): Document
1927         -data-read-memory-raw and -data-write-memory-raw.
1928
1929 2010-08-11  Tom Tromey  <tromey@redhat.com>
1930             Phil Muldoon <pmuldoon@redhat.com>
1931
1932         * gdb.texinfo (Basic Python): Describe post_event API.
1933
1934 2010-08-11  Phil Muldoon  <pmuldoon@redhat.com>
1935
1936         * gdb.texinfo (Basic Python): Describe solib_address and
1937         decode_line Python APIs
1938
1939 2010-08-10  Tom Tromey  <tromey@redhat.com>
1940
1941         * gdb.texinfo (Pretty Printing API): Document
1942         gdb.default_visualizer.
1943
1944 2010-08-10  Tom Tromey  <tromey@redhat.com>
1945
1946         Revert gdb-add-index addition:
1947         * gdb.texinfo (Index Files): Don't document gdb-add-index.
1948
1949 2010-08-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
1950             Eli Zaretskii <eliz@gnu.org>
1951
1952         * gdb.texinfo (Mode Options) <-batch>
1953         (Basic Python) <gdb.execute>: Describe setting width and height.
1954
1955 2010-07-31  Paul Pluzhnikov  <ppluzhnikov@google.com>
1956
1957         * gdb.texinfo (Threads): Document 'debug libthread-db'.
1958
1959 2010-07-30  Tom Tromey  <tromey@redhat.com>
1960
1961         * gdb.texinfo (Index Files): Mention gdb-add-index.
1962
1963 2010-07-30  Hui Zhu  <teawater@gmail.com>
1964
1965         * gdb.texinfo (Inferiors and Programs): Update the introduce of
1966         "detach inferior" and "kill inferior".
1967
1968 2010-07-28  CHENG Renquan  <rqcheng@smu.edu.sg>
1969
1970         * gdb.texinfo (Machine Code): Update description of two forms of
1971         arguments, and add new example to demonstrate the new form.
1972
1973 2010-07-27  Phil Muldoon  <pmuldoon@redhat.com>
1974
1975         * gdb.texinfo (Values From Inferior): Add value inferior function
1976         call description.
1977
1978 2010-07-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1979
1980         * gdb.texinfo (Active Targets): Fix wrong comma placement.
1981
1982 2010-07-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
1983             Eli Zaretskii  <eliz@gnu.org>
1984
1985         Make core files the process_stratum.
1986         * gdb.texinfo (Active Targets): Remove core_stratum.  Include
1987         record_stratum example.
1988
1989 2010-07-13  Tom Tromey  <tromey@redhat.com>
1990
1991         * gdb.texinfo (Index Files): New node.
1992
1993 2010-07-13  Tom Tromey  <tromey@redhat.com>
1994
1995         * gdb.texinfo (GDB/MI Variable Objects): Remove extra 'for'.
1996
1997 2010-07-13  Tom Tromey  <tromey@redhat.com>
1998
1999         * gdb.texinfo (Specify Location): Document labels.
2000
2001 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
2002
2003         * gdb.texinfo (Create and Delete Tracepoints): Add more index
2004         entries for fast tracepoints and static tracepoints.
2005
2006 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
2007
2008         * gdb.texinfo (General Query Packets) <qfThreadInfo,
2009         qsThreadInfo>: Spell out `l' as ell.
2010
2011 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
2012
2013         * gdb.texinfo (Convenience Variables): Document $_sdata.
2014         (Commands to Set Tracepoints): Describe static tracepoints.  Add
2015         `Listing Static Tracepoint Markers' menu entry.  Document
2016         "strace".
2017         (Tracepoint Action Lists): Document collecting $_sdata.
2018         (Listing Static Tracepoint Markers): New subsection.
2019         (Tracepoints support in gdbserver): Mention static tracepoints.
2020         (remote packets, enabling and disabling): Mention
2021         read-sdata-object.
2022         (General Query Packets) <qSupported>: Document qXfer:sdata:read
2023         and StaticTracepoint.
2024         Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets.
2025         Document qXfer:sdata:read.
2026         (Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
2027
2028 2010-06-29  Joel Brobecker  <brobecker@adacore.com>
2029
2030         * gdb.texinfo (Threads In Python): Fix unmatched @end table.
2031
2032 2010-06-28  Phil Muldoon  <pmuldoon@redhat.com>
2033             Tom Tromey  <tromey@redhat.com>
2034             Thiago Jung Bauermann  <bauerman@br.ibm.com>
2035
2036         * gdb.texinfo (Inferiors In Python): New node.
2037         * gdb.texinfo (Threads In Python): New node.
2038
2039 2010-06-28  Joel Brobecker  <brobecker@adacore.com>
2040
2041         * gdb.texinfo (Python): Document what the python directory is
2042         and what its location is.
2043         (Basic Python): Document the gdb.PYTHONDIR constant.
2044
2045 2010-06-25  Tom Tromey  <tromey@redhat.com>
2046
2047         PR python/10808:
2048         * gdb.texinfo (Basic Python): Document new gdb.execute argument.
2049
2050 2010-06-24  Hui Zhu  <teawater@gmail.com>
2051
2052         * gdb.texinfo: (Commands for Controlled Output): Add
2053         documentation for command "eval".
2054
2055 2010-06-21  Stan Shebs  <stan@codesourcery.com>
2056
2057         * gdb.texinfo: Add explicit @node and @appendix for GFDL.
2058         * annotate.texinfo: Ditto.
2059         * gdbint.texinfo: Ditto.
2060         * stabs.texinfo: Ditto.
2061
2062 2010-06-22  Hui Zhu  <teawater@gmail.com>
2063
2064         * gdb.texinfo: (Process Record and Replay): Add documentation
2065         for command "set record memory-query".
2066
2067 2010-06-21  Stan Shebs  <stan@codesourcery.com>
2068
2069         * gdb.texinfo: Relicense under GFDL version 1.3.
2070         * annotate.texinfo: Relicense under GFDL version 1.3.
2071         * gdbint.texinfo: Relicense under GFDL version 1.3.
2072         * stabs.texinfo: Relicense under GFDL version 1.3.
2073         * fdl.texi: Update to version 1.3.
2074
2075 2010-06-18  Stan Shebs  <stan@codesourcery.com>
2076
2077         * gdb.texinfo (Operating System Auxiliary Information): Describe
2078         "info os" when no arguments given.
2079
2080         * gdb.texinfo (Debugging Programs with Multiple Threads): Describe
2081         $_thread.
2082
2083 2010-06-18  Hui Zhu  <teawater@gmail.com>
2084
2085         * gdb.texinfo: (Process Record and Replay): Add documentation
2086         for commands "record save" and "record restore".
2087
2088 2010-06-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
2089
2090         * gdb.texinfo: Include information about the correct use
2091         of addresses in the `watch' command.
2092
2093 2010-06-11  Stan Shebs  <stan@codesourcery.com>
2094
2095         * gdb.texinfo (Observer Mode): New section.
2096         (General Query Packets): Document QAllow.
2097
2098 2010-06-04  Doug Evans  <dje@google.com>
2099
2100         * gdb.texinfo (Python API): New node `Disabling Pretty-Printers'.
2101
2102 2010-06-03  Doug Evans  <dje@google.com>
2103
2104         * gdbint.texinfo (Coding): Add subsection on command names.
2105
2106 2010-06-02  Tom Tromey  <tromey@redhat.com>
2107
2108         * gdb.texinfo (Maintenance Commands): Document maint set dwarf2
2109         always-disassemble.
2110
2111 2010-06-01  Pedro Alves  <pedro@codesourcery.com>
2112
2113         * gdb.texinfo (Set Tracepoints): Mention tracepoints support in
2114         gdbserver, and add cross reference.
2115         (Tracepoints support in gdbserver): New subsection.
2116
2117 2010-05-26  Pedro Alves  <pedro@codesourcery.com>
2118
2119         * gdb.texinfo (General Query Packets) <qSupported>: Describe the
2120         `qRelocInsn' feature.
2121         (Relocate instruction reply packet): New subsection
2122         of `Tracepoint Packets'.
2123         (Tracepoint Packets): Mention that packets QTDP and QTStart
2124         support the qRelocInsn request, and add cross reference to new
2125         subsection.
2126
2127 2010-05-25  Doug Evans  <dje@google.com>
2128
2129         * gdb.texinfo (Exception Handling): Document gdb.GdbError.
2130         (Commands In Python): Document gdb.string_to_argv.
2131
2132 2010-05-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
2133
2134         * gdbint.texinfo (Host Definition): Remove items NORETURN and
2135         ATTR_NORETURN.
2136
2137 2010-04-29  Phil Muldoon  <pmuldoon@redhat.com>
2138             Tom Tromey  <tromey@redhat.com>
2139             Thiago Jung Bauermann  <bauerman@br.ibm.com>
2140
2141         * gdb.texinfo (Parameters In Python): New Node.
2142
2143 2010-04-29  Mihail Zenkov  <mihail.zenkov@gmail.com>
2144
2145         * gdb.texinfo: (Summary) Add mention about D language support.
2146         (Filenames): Add D suffixes.
2147         (D): New node.
2148
2149 2010-04-26  Pierre Muller  <muller@ics.u-strasbg.fr>
2150
2151         * gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation
2152         of macro deleted from GDB code.
2153
2154 2010-04-24  Pedro Alves  <pedro@codesourcery.com>
2155
2156         * gdb.texinfo (Commands to specify files): Describe what how GDB
2157         looks up DOS-based filesystem paths on the system root.  Document
2158         the new `set/show target-file-system-kind' commands.
2159
2160 2010-04-23  Doug Evans  <dje@google.com>
2161
2162         * gdb.texinfo (Python): Move Auto-loading section here ...
2163         (Python API): from here.
2164         (Auto-loading): Add docs for .debug_gdb_scripts auto-loaded scripts.
2165         (Maintenance Commands): Add docs for "maint print section-scripts".
2166
2167 2010-04-20  Chris Moller  <cmoller@redhat.com>
2168
2169         * gdb.texinfo (Setting Breakpoints): Added description of
2170         filename-qualified rbreak.
2171         * refcard.tex (Breakpoints and Watchpoints): Added brief
2172         description of filename-qualified rbreak.
2173
2174 2010-04-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
2175
2176         * gdb.texinfo (Data): New @menu reference to Pretty Printing.
2177         (Python API): Change the reference to Pretty Printing API.
2178         (Pretty Printing): Move the user part under the Data node.  Reformat
2179         the sample output to 72 columns.  Create a new reference to Pretty
2180         Printing API.  Rename the API part ...
2181         (Pretty Printing API): To a new node name.
2182         (Selecting Pretty-Printers, Progspaces In Python, Objfiles In Python)
2183         (GDB/MI Variable Objects): Change references to Pretty Printing API.
2184
2185 2010-04-21  Stan Shebs  <stan@codesourcery.com>
2186
2187         * gdb.texinfo (Tracepoint Actions): Mention synonymy of actions
2188         and commands.
2189         (Listing Tracepoints): Update to reflect current behavior.
2190
2191 2010-04-22  Pierre Muller  <muller@ics.u-strasbg.fr>
2192
2193         * gdb.texinfo (Examining memory): Update for change in string
2194         display with explicit size.
2195
2196 2010-04-19  Pedro Alves  <pedro@codesourcery.com>
2197
2198         PR breakpoints/8554.
2199
2200         * gdb.texinfo (Save Breakpoints): New node.
2201         (save-tracepoints): Rename to ...
2202         (save tracepoints): ... this.  Mention that `save-tracepoints' is
2203         a deprecated alias to `save tracepoints'.
2204
2205 2010-04-16  Pierre Muller  <muller@ics.u-strasbg.fr>
2206
2207         * gdb.texinfo ($_tlb): Document new automatic convinience variable.
2208         (info w32 thread-information-block): Document new command.
2209         (qGetTIBAddress): Document new gdbserver query.
2210         (maint set/show show-all-tib): Document new command.
2211
2212 2010-04-15  Doug Evans  <dje@google.com>
2213
2214         * gdb.texinfo (Python API): Add progspaces section.
2215         (Selecting Pretty-Printers): Progspace pretty-printers are
2216         searched too.
2217         (Progspaces In Python): New section.
2218
2219         * gdb.texinfo (Command Files): Add docs for new "source -s" option.
2220
2221 2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>
2222
2223         * gdb.texinfo (Pretty Printing): Document behaviour when to_string
2224         returns None.
2225
2226 2010-04-09  Stan Shebs  <stan@codesourcery.com>
2227
2228         * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>:
2229         Describe the `frames-created' field, tweak grammar.
2230
2231 2010-04-09  Pedro Alves  <pedro@codesourcery.com>
2232
2233         * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>:
2234         Describe the `circular' and `disconnected' fields.
2235
2236 2010-04-09  H.J. Lu  <hongjiu.lu@intel.com>
2237
2238         * gdb.texinfo (maint print registers): Mention unavailable and
2239         invisible registers.
2240
2241 2010-04-09  Phil Muldoon  <pmuldoon@redhat.com>
2242             Thiago Jung Bauermann  <bauerman@br.ibm.com>
2243             Tom Tromey  <tromey@redhat.com>
2244
2245         * gdb.texinfo (Breakpoints In Python): New Node.
2246
2247 2010-04-08  Stan Shebs  <stan@codesourcery.com>
2248
2249         * gdb.texinfo (Tracepoint Packets): Describe disconn and circular
2250         trace status fields.
2251
2252 2010-04-08  H.J. Lu  <hongjiu.lu@intel.com>
2253
2254         * gdb.texinfo (i386 Features): Make org.gnu.gdb.i386.avx
2255         optional.  Make org.gnu.gdb.i386.avx requires
2256         org.gnu.gdb.i386.avx.
2257
2258 2010-04-08  Doug Evans  <dje@google.com>
2259
2260         * gdb.texinfo (Command Files): Document that gdb skips $cdir in
2261         search path, and document that gdb only scans the search path if
2262         the script's path doesn't specify a directory.
2263
2264 2010-04-05  Doug Evans  <dje@google.com>
2265
2266         * gdb.texinfo (maint show python auto-load): Fix typo.
2267
2268 2010-04-04  Stan Shebs  <stan@codesourcery.com>
2269
2270         * gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
2271         (Setting Watchpoints): Update description of "info watch".
2272         (Disabling Breakpoints): Only "info break" lists all.
2273
2274         * gdb.texinfo (Tracepoint Restrictions): Document PC inference.
2275         (tdump): Explain how tdump works.
2276
2277 2010-04-01  Pedro Alves  <pedro@codesourcery.com>
2278
2279         * gdb.texinfo (Break Commands): Clarify `commands' changes, and
2280         add cross reference.
2281
2282 2010-03-31  Pedro Alves  <pedro@codesourcery.com>
2283
2284         * gdb.texinfo (TUI Commands): Mention that in some cases, these
2285         commands error out.
2286
2287 2010-03-30  H.J. Lu  <hongjiu.lu@intel.com>
2288
2289         * gdb.texinfo (i386 Features): Add org.gnu.gdb.i386.avx.
2290
2291 2010-03-30  H.J. Lu  <hongjiu.lu@intel.com>
2292
2293         * gdb.texinfo (General Query Packets): Add xmlRegisters.
2294
2295 2010-03-29  Stan Shebs  <stan@codesourcery.com>
2296             Nathan Sidwell  <nathan@codesourcery.com>
2297
2298         * gdb.texinfo (GDB/MI Tracepoint Commands): Add notes about the
2299         GDBN equivalent.
2300         (Set Tracepoints): Remove mention that conditional tracepoints
2301         don't exist.
2302         (Tracepoint Actions): Clarify when while-stepping collection
2303         happens, note that while-stepping does not automatically collect
2304         $pc.
2305
2306 2010-03-29  Stan Shebs  <stan@codesourcery.com>
2307
2308         * gdb.texinfo (Tracepoint Packets): Describe QTDPsrc.
2309         (General Query Packets): Describe TracepointSource.
2310
2311 2010-03-27  Matt Rice  <ratmice@gmail.com>
2312
2313         * gdb.texinfo (ARM): Document arguments to "target sim".
2314         (Set Catchpoints): Use @dots{} instead of @r{...}.
2315
2316 2010-03-26  Pedro Alves  <pedro@codesourcery.com>
2317
2318         * gdb.texinfo (Tracepoint Packets): Remove mention that
2319         terror:string may be plain text, and drop mention of X prefix.
2320
2321 2010-03-26  Vladimir Prus  <vladimir@codesourcery.com>
2322
2323         * gdb.texinfo (GDB/MI Tracepoint Commands): Add comma after @xref.
2324
2325 2010-03-24  Stan Shebs  <stan@codesourcery.com>
2326
2327         * gdb.texinfo (Tracepoint Packets): Document trace error status.
2328
2329 2010-03-24  Tom Tromey  <tromey@redhat.com>
2330
2331         PR breakpoints/9352:
2332         * gdb.texinfo (Break Commands): Update.
2333
2334 2010-03-24  Vladimir Prus  <vladimir@codesourcery.com>
2335
2336         * gdb.texinfo (GDB/MI Tracepoint Commands): Document MI tracepoint
2337         commands.
2338
2339 2010-03-16  Stan Shebs  <stan@codesourcery.com>
2340
2341         * gdb.texinfo (Starting and Stopping Trace Experiments): Describe
2342         circular-trace-buffer.
2343         (Tracepoint Packets): Describe QTBuffer, and details of the
2344         qTStatus reply.
2345
2346 2010-03-12  Stan Shebs  <stan@codesourcery.com>
2347             Nathan Sidwell  <nathan@codesourcery.com>
2348
2349         * gdb.texinfo (Tracepoint Actions): Clarify that while-stepping is
2350         doing instruction stepping.
2351         (Tracepoint Restrictions): New node.
2352
2353 2010-03-10  Tom Tromey  <tromey@redhat.com>
2354
2355         * gdbint.texinfo (Symbol Handling): Update.
2356
2357 2010-03-08  Tom Tromey  <tromey@redhat.com>
2358
2359         PR cli/9591:
2360         * gdb.texinfo (Mode Options): Mention lack of pagination and
2361         confirmation with --batch.
2362         (Screen Size): Mention --batch.
2363         (Messages/Warnings): Likewise.
2364
2365 2010-03-05  Tom Tromey  <tromey@redhat.com>
2366
2367         * gdb.texinfo (Basic Python): Document target_charset and
2368         target_wide_charset.
2369
2370 2010-03-05  Tom Tromey  <tromey@redhat.com>
2371
2372         * gdb.texinfo (Data): Link to pretty-printing.
2373         (Output Formats): Likewise.  Correct text.
2374
2375 2010-03-01  Daniel Jacobowitz  <dan@codesourcery.com>
2376
2377         * gdb.texinfo (Types): Describe <struct> and <flags>.
2378
2379 2010-02-28  Phil Muldoon  <pmuldoon@redhat.com>
2380
2381         * gdb.texinfo (Frames In Python): Add block parameter and
2382         description to read_var text.
2383
2384 2010-02-26  Phil Muldoon  <pmuldoon@redhat.com>
2385             Tom Tromey  <tromey@redhat.com>
2386
2387         * gdb.texinfo (Types In Python): Describe block argument in
2388         template_argument and gdb.lookup_type.
2389
2390 2010-02-24  Tom Tromey  <tromey@redhat.com>
2391
2392         * gdb.texinfo (Cygwin Native): Fix typo.
2393
2394 2010-02-24  Phil Muldoon  <pmuldoon@redhat.com>
2395
2396         * gdb.texinfo (Frames In Python): Add block, find_sal, function
2397         and select method descriptions.
2398         (Python API): Add Blocks In Python, Symbols in Python and Symbol
2399         Tables in Python to menu.
2400         (Blocks In Python): New node.
2401         (Symbols In Python): New node.
2402         (Symbol Tables in Python): New node.
2403
2404 2010-02-24  Vladimir Prus  <vladimir@codesourcery.com>
2405
2406         Multiexec MI
2407
2408         gdb/
2409         * breakpoint.c (clear_syscall_counts): Take struct inferior*.
2410
2411         gdb/doc/
2412         * gdb.texinfo (GDB/MI Command Syntax): Document notification
2413         changes.
2414         (GDB/MI Program Execution): Document current behaviour of
2415         --all and --thread-group.
2416         (GDB/MI Miscellaneous Commands): Document -add-inferior and
2417         -remove-inferior.
2418         * observer.texi (inferior_added, inferior_removed): New
2419         observers.
2420
2421 2010-02-19  Tom Tromey  <tromey@redhat.com>
2422
2423         * gdbint.texinfo (Getting Started): Fix @node.
2424         (Debugging GDB): Likewise.
2425
2426 2010-02-13  Joel Brobecker  <brobecker@adacore.com>
2427
2428         * gdbint.texinfo (Testsuite): New section "Testsuite Configuration",
2429         documenting the gdb_test_timeout variable.
2430
2431 2010-02-12  Jakob Engblom  <jakob@virtutech.com>
2432
2433         * gdb.texinfo (MI commands): Added documentation of --reverse
2434         option to a set of MI commands. Restructured documentation of MI
2435         commands --exec-continue to reflect the complexity of reverse
2436         execution.
2437
2438 2010-02-12  Pedro Alves  <pedro@codesourcery.com>
2439
2440         * gdb.texinfo (Using the Collected Data): Specify that the address
2441         range of `tfind outsize' is exclusive, and that the address range
2442         of `tfind range' is inclusive.
2443         (Tracepoint Packets): Specify that the address range of
2444         `QTFrame:range' is inclusive, and that the address range of
2445         `QTFrame:outside' is exclusive
2446
2447 2010-02-12  Vladimir Prus  <vladimir@codesourcery.com>
2448
2449         * gdb.texinfo (GDB/MI Result Records): Clarify ^running.
2450
2451 2010-02-10  Tom Tromey  <tromey@redhat.com>
2452
2453         * gdb.texinfo (Debugging Output): Document set debug parser and
2454         show debug parser.
2455
2456 2010-02-09  H.J. Lu  <hongjiu.lu@intel.com>
2457
2458         * gdb.texinfo (Predefined Target Types): Add i387_ext,
2459         i386_eflags and i386_mxcsr.
2460
2461 2010-02-08  H.J. Lu  <hongjiu.lu@intel.com>
2462
2463         * gdb.texinfo: Document i386 target features.
2464
2465 2010-02-05  Doug Evans  <dje@google.com>
2466
2467         * gdbint.texinfo (Testsuite): Add a new section to document the
2468         various DejaGnu variables that may be overridden.
2469         Document INTERNAL_GDBFLAGS.
2470
2471 2010-02-04  Tom Tromey  <tromey@redhat.com>
2472
2473         PR cli/8830:
2474         * gdb.texinfo (Files): -readnow comes before the filename for file
2475         and symbol-file.
2476
2477 2010-02-01  Daniel Jacobowitz  <dan@codesourcery.com>
2478
2479         * gdb.texinfo (Architecture-Specific Protocol Details): New section.
2480         Document ARM breakpoint types.
2481         (Register Packet Format): Move into the new section.
2482         (Packets): Describe the KIND argument for Z0, z0, Z1, and z1 packets.
2483
2484 2010-01-21  Joel Brobecker  <brobecker@adacore.com>
2485
2486         * gdb.texinfo (File Options): Adjust the documentation of this
2487         switch to refer to the "source" command rather than partially
2488         duplicating some of the relevant information.
2489         (Extending GDB): Introduce and document the set/show script-extension
2490         setting.
2491         (Command Files): Add note explaining that the "source" command
2492         is also used to evalute scripts written in other languages.
2493         Remove the short slightly incorrect reference to sourcing Python
2494         scripts.
2495         (Python Commands): Document how to execute a Python script from GDB.
2496
2497 2010-01-19  Joel Brobecker  <brobecker@adacore.com>
2498
2499         * gdb.texinfo (Command Files): Fix typo.
2500
2501 2010-01-18  Tom Tromey  <tromey@redhat.com>
2502
2503         * gdb.texinfo (File Options): Document -x on .py files.
2504         (Command Files): Document handling of Python scripts.
2505
2506 2010-01-18  Jie Zhang  <jie.zhang@analog.com>
2507
2508         * Makefile.in (ANNOTATE_DOC_BUILD_INCLUDES): Add GDBvn.texi.
2509
2510 2010-01-15  Stan Shebs  <stan@codesourcery.com>
2511
2512         * gdb.texinfo (Trace Files): New section.
2513         (Tracepoint Packets): Document QTSave and qTBuffer.
2514         (Trace File Format): New appendix.
2515
2516 2010-01-13  Phil Muldoon  <pmuldoon@redhat.com>
2517
2518         * gdb.texinfo (Values From Inferior): Document lazy_string value
2519         method.
2520         (Python API): Add Lazy strings menu item.
2521         (Lazy Strings In Python): New node.
2522
2523 2010-01-13  Vladimir Prus  <vladimir@codesourcery.com>
2524
2525         * gdb.texinfo (GDB/MI Thread Information): New.
2526         (GDB/MI Async Records): Document the core field in *stopped.
2527         (GDB/MI Miscellaneous Commands): Expand -list-thread-groups
2528         documentation
2529         (Process list): Document that osdata document may contain
2530         threads.
2531         (Remote Serial Protocol): Document qXfer:threads.
2532
2533 2010-01-06  Stan Shebs  <stan@codesourcery.com>
2534
2535         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
2536         disconnected tracing.
2537         (Tracepoint Packets): Document new protocol.
2538
2539 2010-01-05  Stan Shebs  <stan@codesourcery.com>
2540
2541         * gdb.texinfo (Create and Delete Tracepoints): Describe fast
2542         tracepoints.
2543         (Tracepoint Packets): Describe remote protocol for fast
2544         tracepoints.
2545
2546 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
2547
2548         Update the "Start of New Year Procedure".
2549         * gdbint.texinfo: Add the list of files that need to be updated
2550         manually.  Minor reformatting.
2551
2552 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
2553
2554         * refcard.tex: Update copyright year in header and text.
2555
2556 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
2557
2558         * agentexpr.texi: Add 2010 to the list of copyright years.
2559         * annotate.texinfo: Likewise.
2560         * gdb.texinfo: Likewise.
2561         * gdbint.texinfo: Likewise.
2562         * observer.texi: Likewise.
2563         * stabs.texinfo: Likewise.
2564
2565 2009-12-31  Stan Shebs  <stan@codesourcery.com>
2566
2567         * gdb.texinfo (Tracepoint Actions): Describe teval.
2568
2569 2009-12-29  Stan Shebs  <stan@codesourcery.com>
2570
2571         * gdb.texinfo (Tracepoint Actions): Describe default-collect.
2572
2573 2009-12-28  Stan Shebs  <stan@codesourcery.com>
2574
2575         * gdb.texinfo (Trace State Variables): New section.
2576         (Tracepoint Packets): Describe trace state variable packets.
2577         * agentexpr.texi (Bytecode Descriptions): Describe trace state
2578         variable bytecodes.
2579
2580 2009-12-28  Daniel Jacobowitz  <dan@codesourcery.com>
2581
2582         * gdb.texinfo (Symbols): "info variables" prints definitions, not
2583         declarations.
2584
2585 2009-12-21  Vladimir Prus  <vladimir@codesourcery.com>
2586
2587         * gdb.texinfo (GDB/MI Miscellaneous Commands): Clarify that
2588         -gdb-exit behaviour.
2589
2590 2009-12-20  Joel Brobecker  <brobecker@adacore.com>
2591
2592         * gpl.texi: Update to version 3 of the GPL.
2593
2594 2009-12-20  Joel Brobecker  <brobecker@adacore.com>
2595
2596         * Makefile.in: Update copyright header.
2597         * observer.texi: Fix the copyright header of the generated files.
2598
2599 2009-12-08  Phil Muldoon  <pmuldoon@redhat.com>
2600
2601         * gdb.texinfo (Types In Python): Describe range function.
2602
2603 2009-12-03  Richard Ward  <richard.j.ward1@googlemail.com>
2604
2605         * gdb.texinfo (Types In Python): Describe "is_base_class".
2606
2607 2009-12-03  Tom Tromey  <tromey@redhat.com>
2608
2609         * gdb.texinfo (Basic Python): Document gdb.parse_and_eval.
2610
2611 2009-12-02  Paul Pluzhnikov  <ppluzhnikov@google.com>
2612
2613         * observer.texi: New memory_changed observer.
2614
2615 2009-12-01  Tom Tromey  <tromey@redhat.com>
2616
2617         * gdb.texinfo (Reverse Execution): Fix typo.
2618
2619 2009-11-24  Daniel Jacobowitz  <dan@codesourcery.com>
2620
2621         PR gdb/8704
2622
2623         * gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers
2624         are allowed after the breakpoint condition.
2625
2626 2009-11-23  Tom Tromey  <tromey@redhat.com>
2627
2628         PR python/10782:
2629         * gdb.texinfo (Types In Python): Document Type.pointer.
2630
2631 2009-11-23  Paul Pluzhnikov  <ppluzhnikov@google.com>
2632
2633         * gdb.texinfo (Machine Code): Adjust.
2634
2635 2009-11-11  Pedro Alves  <pedro@codesourcery.com>
2636
2637         * agentexpr.texi (Tracing On Symmetrix): Delete section.
2638         (Using Agent Expressions): Delete cross reference.
2639
2640 2009-11-07  Joel Brobecker  <brobecker@adacore.com>
2641
2642         * gdbint.texinfo, stabs.texinfo: Move the @setchapternewpage
2643         and @settitle directives up to help makeinfo find them.
2644
2645 2009-11-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
2646
2647         * gdb.texinfo (set debug-file-directory, show debug-file-directory)
2648         (Auto-loading): Use plural and note one can use multiple components now.
2649
2650 2009-11-01  Vladimir Prus  <vladimir@codesourcery.com>
2651
2652         * gdb.texinfo (GDB/MI Stack Manipulation): Make
2653         -stack-list-arguments have the same documentation for parameter
2654         as -stack-list-locals. Add comas.
2655
2656 2009-10-27  Tom Tromey <tromey@redhat.com>
2657             Eli Zaretskii <eliz@gnu.org>
2658
2659         PR python/10781
2660
2661         * gdb.texinfo (Values From Inferior): Document cast method.
2662
2663 2009-10-22  Paul Pluzhnikov  <ppluzhnikov@google.com>
2664
2665         * gdb.texinfo (Machine Code): Mention function name in disasssembly
2666         and adjust example.
2667
2668 2009-10-22  Michael Snyder  <msnyder@vmware.com>
2669
2670         * gdb.texinfo (Process Record and Replay): Document new form of
2671         info record command.  Also document the new save and restore
2672         commands.
2673
2674 2009-10-21  Paul Pluzhnikov  <ppluzhnikov@google.com>
2675
2676         * gdb.texinfo (Machine Code): Mention current pc marker.
2677         (Memory): Likewise.
2678
2679 2009-10-19  Pedro Alves  <pedro@codesourcery.com>
2680             Stan Shebs  <stan@codesourcery.com>
2681
2682         * observer.texi (new_inferior): Rename to...
2683         (inferior_appeared): ... this.
2684
2685         * gdb.texinfo (Inferiors): Rename node to ...
2686         (Inferiors and Programs): ... this.  Mention running multiple
2687         programs in the same debug session.
2688         <info inferiors>: Mention the new 'Executable' column if "info
2689         inferiors".  Update examples.  Document the "add-inferior",
2690         "clone-inferior", "remove-inferior" and "maint info
2691         program-spaces" commands.
2692         (Process): Rename node to...
2693         (Forks): ... this.  Document "set|show follow-exec-mode".
2694
2695 2009-10-11  Michael Snyder  <msnyder@vmware.com>
2696
2697         * gdb.texinfo (ReverseStep): Show default as "unsupported".
2698         (ReverseContinue): Ditto.
2699
2700 2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>
2701
2702         * gdb.texinfo (Server): Document libthread-db-search-path.
2703
2704 2009-10-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
2705
2706         * gdbint.texinfo (i386_stopped_by_hwbp): Remove.
2707
2708 2009-10-06  Michael Eager  <eager@eagercon.com>
2709
2710         * gdb.texinfo (Contributors): Add self for Xilinx MicroBlaze.
2711         (Embedded Processors): Add MicroBlaze.
2712         (MicroBlaze): New.  Describe Xilinx MicroBlaze
2713
2714 2009-10-04  Pedro Alves  <pedro@codesourcery.com>
2715
2716         * gdb.texinfo (Remote Protocol): Don't mention vCont;T.
2717
2718 2009-09-26  Pierre Muller  <muller@ics.u-strasbg.fr>
2719
2720         * gdb.texinfo (Cygwin Native): Mention support for Ctrl-BREAK.
2721
2722 2009-09-23  Joel Brobecker  <brobecker@adacore.com>
2723
2724         * observer.texi (solib_unloaded): Document explicitly the fact that
2725         this observer is called before the associated symbols are unloaded.
2726
2727 2009-09-19  Vladimir Prus  <vladimir@codesourcery.com>
2728
2729         * gdb.texinfo (GDB/MI Stack Manipulation): Document
2730         -stack-list-variables.
2731
2732 2009-09-18  Tom Tromey  <tromey@redhat.com>
2733
2734         * gdb.texinfo (GDB/MI Variable Objects): -enable-pretty-printing
2735         is experimental.
2736
2737 2009-09-17  Paul Pluzhnikov  <ppluzhnikov@google.com>
2738
2739         * gdb.texinfo (convenince variables): Mention
2740         $_siginfo could be empty.
2741
2742 2009-09-15  Tom Tromey  <tromey@redhat.com>
2743
2744         * gdb.texinfo (GDB/MI Variable Objects): Document
2745         -enable-pretty-printing, -var-set-update-range, dynamic varobjs.
2746         Expand -var-update documentation.
2747
2748 2009-09-14  Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
2749
2750         * gdb.texinfo (Set Catchpoints): Documentation about the catch syscall
2751         feature.
2752
2753 2009-09-13  Daniel Jacobowitz  <dan@codesourcery.com>
2754
2755         * gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.
2756
2757 2009-09-10  Michael Snyder  <msnyder@vmware.com>
2758
2759         * gdb.texinfo (qSupported): Mention new ReverseContinue and
2760         ReverseStep replies to the qSupported query.
2761
2762 2009-09-10  Joel Brobecker  <brobecker@adacore.com>
2763
2764         Add documentation for set/show interactive-mode.
2765         * gdb.texinfo (Other Misc Settings): New node.
2766
2767 2009-09-01  Doug Evans  <dje@google.com>
2768
2769         * gdb.texinfo (Caching Data of Remote Targets): Add note on
2770         non-stop mode's affect on remote caching.
2771
2772 2009-08-31  Jacob Potter  <jdpotter@google.com>
2773             Doug Evans  <dje@google.com>
2774
2775         * gdb.texinfo (Caching Data of Remote Targets): Update text.
2776         Mark `set/show remotecache' options as obsolete.
2777         Document new `set/show stack-cache' option.
2778         Update text for `info dcache'.
2779
2780 2009-08-27  Doug Evans  <dje@google.com>
2781
2782         * gdb.texinfo (Symbols): Delete `set print symbol-loading'.
2783         (Files): Add note on new optional regex arg to `info sharedlibrary'.
2784
2785 2009-08-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
2786
2787         * gdbint.texinfo (Releasing GDB): Fix confusing sentence
2788         about autoconf.
2789
2790 2009-08-25  Pedro Alves  <pedro@codesourcery.com>
2791
2792         * gdb.texinfo (Debugging Multiple Inferiors): Add "info inferiors"
2793         small example, and describe its columns.  Replace "inferior-id" by
2794         "infno" throughout.
2795
2796 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
2797
2798         * gdbint.texinfo (Releasing GDB): Point to
2799         README-maintainer-mode file for required autoconf version.
2800         * configure.ac: Do not substitute datarootdir, htmldir,
2801         pdfdir, docdir.  Do not process --with-datarootdir,
2802         --with-htmldir, --with-pdfdir, --with-docdir.
2803         * configure: Regenerate.
2804
2805         * configure: Regenerate.
2806
2807 2009-08-20  Reid Kleckner  <reid@kleckner.net>
2808
2809         * gdb.texinfo: Add chapter on JIT interface.
2810
2811 2009-08-07  Nick Roberts  <nickrob@snap.net.nz>
2812
2813         * gdb.texinfo (Server Prefix): Explain that server prefix suppresses
2814         confirmation request.
2815
2816 2009-08-05  Jeremy Bennett  <jeremy.bennett@embecosm.com>
2817
2818         * gdb.texinfo (Separate Debug Files, Remote Protocol): Clarified
2819         CRC definitions.
2820
2821 2009-08-03  Vladimir Prus  <vladimir@codesourcery.com>
2822
2823         * gdb.texinfo (GDB/MI Breakpoint Commands): Document
2824         -break-commands.
2825
2826 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
2827
2828         * gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
2829         "set spu auto-flush-cache" and "show spu auto-flush-cache" commands.
2830
2831 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
2832
2833         * gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
2834         "set spu stop-on-load" and "show spu stop-on-load" commands.
2835
2836 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
2837
2838         * gdb.texinfo (Target Descriptions): Document <compatible> element.
2839
2840 2009-07-28  Daniel Jacobowitz  <dan@codesourcery.com>
2841
2842         * gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.vfp and
2843         org.gnu.gdb.arm.neon.
2844
2845 2009-07-20  Pedro Alves  <pedro@codesourcery.com>
2846
2847         * gdb.texinfo (Target Description Format): Mention the new <osabi>
2848         optional element.
2849         (subsection OS ABI): New subsection.
2850
2851 2009-07-14  Stan Shebs  <stan@codesourcery.com>
2852
2853         * gdb.texinfo (Tracepoint Conditions): New section.
2854         (General Query Packets): Describe ConditionalTracepoints.
2855         (Tracepoint Packets): Describe condition field.
2856         (Maintenance Commands): Describe maint agent-eval.
2857         * agentexpr.texi (Using Agent Expressions): Mention eval usage.
2858
2859 2009-07-11  Hui Zhu  <teawater@gmail.com>
2860
2861         * gdb.texinfo (disassemble): Add a new modifier /r
2862         to "disassemble" command to make it print the raw instructions
2863         in hex as well as in symbolic form.
2864
2865 2009-07-09  Tom Tromey  <tromey@redhat.com>
2866
2867         * gdbint.texinfo (Testsuite): Document parallel make check.
2868
2869 2009-07-09  Tom Tromey  <tromey@redhat.com>
2870
2871         * gdbint.texinfo (Testsuite): Document test transcripts.
2872
2873 2009-07-10  Phil Muldoon  <pmuldoon@redhat.com>
2874
2875         * gdb.texinfo (Values From Inferior): Add length parameter
2876         description.
2877
2878 2009-07-04  Chris Genly  <chris@genly.us>
2879
2880         * gdb.texinfo (GDB/MI Variable Objects): Document child definition
2881         in -var-list-children.  Fix example according to what the code
2882         does.
2883
2884 2009-07-02  Pedro Alves  <pedro@codesourcery.com>
2885
2886         * gdb.texinfo (Debugging multiple inferiors): Document the
2887         "inferior", "detach inferior" and "kill inferior" commands.
2888         (Debugging Programs with Multiple Processes): Adjust to mention
2889         generic "inferior" commands.  Delete mention of "detach fork" and
2890         "delete fork".  Cross reference to "Debugging multiple inferiors"
2891         section.
2892
2893 2009-07-02  Ulrich Weigand  <uweigand@de.ibm.com>
2894
2895         * gdbint.texinfo (Item Output Functions): Update signature
2896         for ui_out_field_core_addr.
2897
2898 2009-07-02  Ulrich Weigand  <uweigand@de.ibm.com>
2899
2900         * gdbint.texinfo (Examples of Use of @code{ui_out} functions):
2901         Update example code extrated from breakpoint.c.
2902
2903 2009-06-28  Paul Pluzhnikov  <ppluzhnikov@google.com>
2904
2905         * gdb.texinfo (GDB/MI Program Context): @ignore unimplemented
2906         MI commands.
2907         (GDB/MI Symbol Query): Likewise.
2908         (GDB/MI File Commands): Likewise.
2909         (GDB/MI File Transfer Commands): Likewise.
2910         (GDB/MI Target Manipulation): Likewise.
2911         (GDB/MI Miscellaneous Commands): Likewise.
2912
2913 2009-06-27  Daniel Jacobowitz  <dan@codesourcery.com>
2914
2915         * gdb.texinfo (Debugging Optimized Code): New chapter.
2916         (Compiling for Debugging): Reference it.  Move some
2917         text to the new section.
2918
2919 2009-06-15  Phil Muldoon  <pmuldoon@redhat.com>
2920
2921         * doc/gdb.texinfo (Calling): Document
2922         set-unwind-on-terminating-exception usage.
2923
2924 2009-06-11  Pedro Alves  <pedro@codesourcery.com>
2925
2926         * gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
2927         command.
2928
2929 2009-06-07  Pedro Alves  <pedro@codesourcery.com>
2930
2931         * gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
2932         references.
2933
2934 2009-06-04  Ulrich Weigand  <uweigand@de.ibm.com>
2935
2936         * gdbint.texinfo: Rename formal parameters to gdbarch function
2937         protoypes from "current_gdbarch" to "gdbarch".
2938
2939 2009-05-28  Tom Tromey  <tromey@redhat.com>
2940
2941         * gdb.texinfo (Basic Python): Change get_parameter to parameter.
2942
2943 2009-05-27  Tom Tromey  <tromey@redhat.com>
2944
2945         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document "python"
2946         feature.
2947         (GDB/MI Variable Objects): Document -var-set-visualizer.
2948
2949 2009-04-02  Tom Tromey  <tromey@redhat.com>
2950
2951         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document "python"
2952         feature.
2953         (GDB/MI Variable Objects): Document -var-set-visualizer.
2954
2955 2009-05-27  Tom Tromey  <tromey@redhat.com>
2956             Thiago Jung Bauermann  <bauerman@br.ibm.com>
2957             Phil Muldoon  <pmuldoon@redhat.com>
2958
2959         * gdb.texinfo (Objfiles In Python): Reference pretty printing.
2960         (Pretty Printing): New node.
2961         (Selecting Pretty-Printers): Likewise.
2962         (Python API): Update.
2963         (Output Formats): Document /r format.
2964
2965 2009-05-27  Thiago Jung Bauermann  <bauerman@br.ibm.com>
2966             Tom Tromey  <tromey@redhat.com>
2967
2968         * gdb.texinfo (Types In Python): New node.
2969         (Values From Inferior): "type" is now an attribute.
2970         (Python API): Update.
2971
2972 2009-05-27  Tom Tromey  <tromey@redhat.com>
2973             Thiago Jung Bauermann  <bauerman@br.ibm.com>
2974             Phil Muldoon  <pmuldoon@redhat.com>
2975
2976         * gdb.texinfo: Add @syncodeindex for `tp'.
2977         (Python API): Update.
2978         (Auto-loading): New node.
2979         (Objfiles In Python): New node.
2980
2981 2009-05-15  Paul Pluzhnikov  <ppluzhnikov@google.com>
2982
2983         * gdb.texinfo (Threads): Document libthread-db-search-path.
2984
2985 2009-05-15  Nick Roberts  <nickrob@snap.net.nz>
2986
2987         * gdb.texinfo (GDB/MI General Design): Break up into four nodes.
2988
2989 2009-05-12  Pedro Alves  <pedro@codesourcery.com>
2990
2991         * gdb.texinfo: Document 'set/show debug gnu-nat'.  Replace 'maint
2992         show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
2993         show show-debug-regs' docs.
2994
2995 2009-05-08  Eli Zaretskii  <eliz@gnu.org>
2996
2997         * gdb.texinfo (Process Record and Replay): Add description of
2998         reverse execution.
2999
3000 2009-05-07  Joel Brobecker  <brobecker@adacore.com>
3001
3002         * gdbint.texinfo (Adding support for debugging core files): New node.
3003         (Native Debugging): Remove the ``Native core file Support'' section.
3004
3005 2009-05-01  Eli Zaretskii  <eliz@gnu.org>
3006
3007         * gdb.texinfo (Process Record and Replay): Improve and clarify.
3008         Add index entries.
3009
3010 2009-04-30  Hui Zhu  <teawater@gmail.com>
3011             Michael Snyder  <msnyder@vmware.com>
3012
3013         * gdb.texinfo: (Process Record and Replay): Add documentation for
3014         process record and replay.
3015
3016 2009-04-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
3017
3018         * gdb.texinfo (Macros): Note command-line for `info macro'.  Append
3019         a new part on command-line defined macros.
3020
3021 2009-04-25  Eli Zaretskii  <eliz@gnu.org>
3022
3023         * gdb.texinfo (Machine Code) <disassemble-next-line>: Improve and
3024         clarify the wording.
3025
3026 2009-04-23  Tom Tromey  <tromey@redhat.com>
3027
3028         * gdb.texinfo (Data Files): New node.
3029         (GDB Files): Update menu.
3030
3031 2009-04-23  Joel Brobecker  <brobecker@adacore.com>
3032
3033         * gdbint.texinfo (Defining Other Architecture Features): Remove
3034         entry for PROCESS_LINENUMBER_HOOK.
3035
3036 2009-04-22  Vladimir Prus  <vladimir@codesourcery.com>
3037
3038         * gdb.texinfo (GDB/MI Program Execution): Document -exec-jump.
3039
3040 2009-04-22  Hui Zhu  <teawater@gmail.com>
3041
3042         * gdb.texinfo (disassemble-next-line): Set the default of
3043         disassemble-next-line to off.
3044
3045 2009-04-21  Joseph Myers  <joseph@codesourcery.com>
3046
3047         * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
3048         --with-htmldir): New.
3049         * configure: Regenerate.
3050         * Makefile.in (datarootdir, docdir): Define.
3051         (gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info
3052         instead of $(SET_TEXINPUTS).
3053         (gdbint.dvi, gdbint.pdf): Use same -I options as for building
3054         gdbint.info instead of $(SET_TEXINPUTS).
3055         (gdbint/index.html): Use same -I options as for building
3056         gdbint.info.
3057         (stabs.dvi, stabs.pdf): Use same -I options as for building
3058         stabs.info instead of $(SET_TEXINPUTS).
3059         (stabs/index.html): Use same -I options as for building
3060         stabs.info.
3061         (annotate.dvi, annotate.pdf): Use same -I options as for building
3062         annotate.info instead of $(SET_TEXINPUTS).
3063         (annotate/index.html): Use same -I options as for building
3064         annotate.info.
3065
3066 2009-04-21  David Daney  <ddaney@caviumnetworks.com>
3067
3068         * gdb.texinfo (maint show-debug-regs): Remove mention of x86.
3069
3070 2009-04-21  Joseph Myers  <joseph@codesourcery.com>
3071
3072         * gdb.texinfo (Source Path): Document --with-relocated-sources.
3073
3074 2009-04-18  Carlos O'Donell  <carlos@codesourcery.com>
3075             Joseph Myers  <joseph@codesourcery.com>
3076
3077         * Makefile.in (MAKEHTML): Set to makeinfo --html.
3078         (MAKEHTMLFLAGS): Set to empty.
3079         (html__strip_dir): Define.
3080         (HTMLFILES): Define.
3081         (HTMLFILES_INSTALL): Define.
3082         (install-html): Copy new automake rule.
3083         (html): Depend on $(HTMLFILES).
3084         (gdb_toc.html): Rename to gdb/index.html.
3085         (gdbint_toc.html): Rename to gdbint/index.html.
3086         (stabs_toc.html): Rename to stabs/index.html.
3087         (annotate_toc.html): Rename to annotate/index.html.
3088
3089 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
3090
3091         * Makefile.in: Set pdfdir and htmldir from configure
3092         substitutions.
3093         * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
3094         * configure: Regenerate.
3095
3096 2009-04-16  Joel Brobecker  <brobecker@adacore.com>
3097
3098         * gdbint.texinfo (Native Debugging): Remove entry for PROC_NAME_FMT.
3099         This macro is no longer used.
3100
3101 2009-04-15  Tom Tromey  <tromey@redhat.com>
3102
3103         * gdb.texinfo (Character Sets): Document default character set.
3104
3105 2009-04-14  Pierre Muller  <muller@ics.u-strasbg.fr>
3106
3107         * gdbint.texinfo: Change server name from sources.redhat.com to
3108         sourceware.org throughout.
3109
3110 2009-04-09  Joel Brobecker  <brobecker@adacore.com>
3111
3112         * gdb.texinfo (Set Breaks): Rewrite a paragraph to avoid a warning
3113         about a missing dot or coma after @xref.
3114
3115 2009-04-02  Joel Brobecker  <brobecker@adacore.com>
3116
3117         * gdb.texinfo (Backtrace): Add a parameter in frame 1 of the first
3118         example, and add a small explanation about it.
3119         (Print Settings): Change the documentation of the "set print
3120         frame-arguments" to reflect the fact that the default is now "scalars".
3121
3122 2009-04-02  Joel Brobecker  <brobecker@adacore.com>
3123
3124         * gdb.texinfo (Print Settings): Add kindex for command "set
3125         print frame-arguments".
3126
3127 2009-03-31  Joel Brobecker  <brobecker@adacore.com>
3128
3129         * gdb.texinfo (Ada Tasks): Add documentation about task-specific
3130         breakpoints.
3131         (Set Breaks): Add reference to thread-specific and task-specific
3132         breakpoints.
3133
3134 2009-03-31  Joel Brobecker  <brobecker@adacore.com>
3135
3136         * gdb.texinfo (Ada Tasks): Remove the documentation about
3137         the "Running" state, as this state has been eliminated.
3138         Now all runnable tasks are shown as "Runnable".
3139
3140 2009-03-30  Stan Shebs  <stan@codesourcery.com>
3141
3142         * gdb.texinfo (Tracepoints): Describe tracepoints as a
3143         special case of breakpoints.
3144         (Enable and Disable Tracepoints): Mention deprecation.
3145         (Listing Tracepoints): Update description and example.
3146
3147 2009-03-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3148
3149         * gdb.texinfo (Frames in Python): New node.
3150         (Python API): Update.
3151
3152 2009-03-29  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3153
3154         * gdb.texinfo (Values From Inferior): Change gdb.Value.address
3155         from a method to an attribute.
3156
3157 2009-03-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3158
3159         * gdb.texinfo (Values From Inferior): Document is_optimized_out
3160         attribute.
3161
3162 2009-03-25  Pedro Alves  <pedro@codesourcery.com>
3163
3164         * observer.texi (thread_exit): Add "silent" parameter.
3165
3166 2009-03-22  Pedro Alves  <pedro@codesourcery.com>
3167
3168         * observer.texi (about_to_proceed): New.
3169
3170 2009-03-21  Jeremy Bennett  <jeremy.bennett@embecosm.com>
3171
3172         * gdbint.texinfo (everywhere): Use braces {} in @deftypeXX type
3173         field throughout to handle types with spaces in them.  Fix typos
3174         found by aspell.
3175         (Summary, Requirements, Contributors): New first chapter,
3176         "Summary" added, old Requirements section moved there, and new
3177         section, "Contributors" added.
3178         (Initializing a New Architecture, Register Representation)
3179         (Frame Interpretation, Inferior Call Setup, Adding a New Target)
3180         (Porting gdb): These sections extended and updated.
3181         (Compiler Characteristics): This section (empty) deleted.
3182         (Defining Other Architecture Features): This section renamed and
3183         duplicate material removed from (formerly "Target Conditionals").
3184         Use braces {} in @deftypeXX type field throughout to handle types
3185         with spaces in them. Typos found by aspell fixed.
3186
3187         * stack_frame.svg: New file, source of image for gdbint.texinfo.
3188         * stack_frame.pdf: Version of image for PDF output.
3189         * stack_frame.png: Version of image for HTML output and for Emacs.
3190         * stack_frame.txt: Version of image for Info output.
3191         * stack_frame.eps: Version of image for TeX DVI output.
3192
3193 2009-03-21  Eli Zaretskii  <eliz@gnu.org>
3194
3195         * gdb.texinfo (Character Sets): Fix last change.
3196
3197 2009-03-21  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3198
3199         * gdb.texinfo (Values From Inferior): Fix optional arguments
3200         markup.
3201         (Commands In Python): Adjust argument names of gdb.Command.__init__
3202         to what the function accepts as keywords.
3203
3204 2008-03-20  Tom Tromey  <tromey@redhat.com>
3205
3206         * gdb.texinfo (Convenience Vars): Document convenience functions.
3207         (Functions In Python): New node.
3208         (Python API): Update.
3209
3210 2009-03-20  Tom Tromey  <tromey@redhat.com>
3211
3212         * gdb.texinfo (Character Sets): Remove obsolete text.  Document
3213         set target-wide-charset.
3214         (Requirements): Mention iconv.
3215
3216 2009-03-17  Hui Zhu  <teawater@gmail.com>
3217
3218         * gdb.texinfo: Change the introduce of "disassemble-next-line".
3219
3220 2009-03-17  Hui Zhu  <teawater@gmail.com>
3221
3222         * gdb.texinfo: Add documentation for disassemble-next-line.
3223
3224 2009-03-16  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3225
3226         * gdb.texinfo (Commands In Python): Remove tindex entries.
3227
3228 2009-03-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
3229
3230         * gdb.texinfo (Returning): New description for missing debug info.
3231
3232 2009-03-14  Pedro Alves  <pedro@codesourcery.com>
3233
3234         * gdb.texinfo (Remote Configuration): Document query-attached.
3235         (General Query Packets): Document qAttached.
3236
3237 2009-03-05  Pedro Alves  <pedro@codesourcery.com>
3238
3239         * gdb.texinfo (Background Execution): Better describe the set
3240         target-async command.
3241         (Maintenance Commands): Delete description of the `maint set/show
3242         linux-async' and `maint set/show remote-async' commands.
3243
3244 2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>
3245
3246         * gdb.texinfo (GDB/MI Async Records): Add double-spaces
3247         between sentences.
3248
3249 2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>
3250
3251         * gdb.texinfo (GDB/MI Async Records): Document the
3252         =library-loaded and =library-unloaded notifications.
3253
3254 2009-02-17  Vladimir Prus  <vladimir@codesourcery.com>
3255
3256         * observer.texi (test_notification): New observer.
3257
3258 2009-02-14  Vladimir Prus  <vladimir@codesourcery.com>
3259
3260         * observer.texi: Add parameter 'print_frame' to normal_stop
3261         observer.
3262
3263 2009-02-07  Eli Zaretskii  <eliz@gnu.org>
3264
3265         * gdb.texinfo (Basic Python): Fix change from 2009-02-04.
3266         (Commands In Python): Fix COMMAND_* constants in last change.  Use
3267         @kbd for interactive input.  Add cross-references and index
3268         entries.
3269
3270 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
3271
3272         * gdb.texinfo (Signals): Document $_siginfo.
3273         (Convenience Variables): Mention $_siginfo.
3274         (Remote Configuration): Document qXfer:siginfo:read,
3275         qXfer:siginfo:write packets, and the read-siginfo-object,
3276         write-siginfo-object commands.
3277
3278 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
3279
3280         * gdbint.texinfo (Values): New chapter.
3281
3282 2009-02-06  Tom Tromey  <tromey@redhat.com>
3283
3284         * gdb.texinfo (Python API): Add entry for Commands In Python.
3285         (Commands In Python): New node.
3286
3287 2009-02-05  Tom Tromey  <tromey@redhat.com>
3288
3289         * gdb.texinfo (Values From Inferior): Document Value.string.
3290
3291 2009-02-05  Tom Tromey  <tromey@redhat.com>
3292
3293         * gdb.texinfo (Basic Python): Document execute's from_tty
3294         argument.
3295
3296 2009-02-04  Tom Tromey  <tromey@redhat.com>
3297
3298         * gdb.texinfo (Basic Python): Document gdb.history.
3299
3300 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
3301
3302         * gdb.texinfo (GDB/MI Thread Commands): Document the
3303         'current-thread-id' field.  Remove the example with zero threads,
3304         since current GDB won't ever report that if there's inferior.
3305
3306 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
3307
3308         * gdb.texinfo (GDB/MI Breakpoint Commands): Document the -d
3309         option to -break-insert.
3310
3311 2009-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
3312             Jerome Guitton  <guitton@adacore.com>
3313
3314         * gdb.texinfo (Startup): Document --with-system-gdbinit.
3315         (System-wide configuration): New section.
3316
3317 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
3318
3319         PR gdb/7580:
3320         * gdb.texinfo (Maintenance Commands): Document "maint set|show
3321         internal-error|internal-warning quit|corefile ask|yes|no".
3322
3323 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
3324
3325         * gdb.texinfo (Using the `gdbserver' Program): Document
3326         --remote-debug.
3327
3328 2009-01-23  Doug Evans  <dje@google.com>
3329
3330         * gdb.texinfo: Add nexti to list of commands that support
3331         background execution.
3332
3333 2009-01-14  Daniel Jacobowitz  <dan@codesourcery.com>
3334
3335         * gdb.texinfo (Define, Hooks): Document prefix command support.
3336
3337 2009-01-14  Joseph Myers  <joseph@codesourcery.com>
3338             Carlos O'Donell  <carlos@codesourcery.com>
3339
3340         Fixes for makeinfo --html.
3341
3342         * annotate.texinfo: Use @copying and @insertcopying.  Use
3343         @ifnottex in place of @ifinfo.
3344         * gdb.texinfo: Use @copying and @insertcopying.  Use @ifnottex in
3345         place of @ifinfo.  Use @ifnotinfo for one index entry.
3346         * gdbint.texinfo: Use @copying and @insertcopying.  Use @ifnottex
3347         in place of @ifinfo.
3348         * stabs.texinfo: Use @copying and @insertcopying.  Use @ifnottex
3349         in place of @ifinfo.  Include contents at start unconditionally.
3350
3351 2009-01-13  Pedro Alves  <pedro@codesourcery.com>
3352
3353         * gdb.texinfo (General Query Packets): Remove @var{} around the
3354         "spu" literal string.
3355
3356 2009-01-07  Pedro Alves  <pedro@codesourcery.com>
3357
3358         * gdb.texinfo (Error in Breakpoints): Delete mention of "The same
3359         program may be running in another process" errors.
3360         * gdbint.texinfo (Native Conditionals): Delete
3361         ONE_PROCESS_WRITETEXT description.
3362
3363 2009-01-07  Joel Brobecker  <brobecker@adacore.com>
3364
3365         * gdbint.texinfo (Start of New Year Procedure): Add the "coding"
3366         emacs local variable to be placed at the end of the ChangeLog.
3367         Add server.c and gdbreplay.c to the list of files where the
3368         copyright year needs to be updated.
3369
3370 2009-01-06  Sandra Loosemore  <sandra@codesourcery.com>
3371
3372         * gdb.texinfo (Remote Configuration): Document new
3373         "set/show tcp auto-retry" and "set/show tcp connect-timeout"
3374         commands.
3375
3376 2008-12-28  Pedro Alves  <pedro@codesourcery.com>
3377
3378         * gdbint.texinfo (gdbarch_cannot_fetch_register): Don't mention
3379         FETCH_INFERIOR_REGISTERS.
3380         (Native Conditionals): Remove obsolete CHILD_PREPARE_TO_STORE,
3381         FETCH_INFERIOR_REGISTERS descriptions.  Remove
3382         gdbarch_get_longjmp_target descrition, since already described in
3383         Target Conditionals.  Move gdbarch_fp0_regnum description to ...
3384         (Target Conditionals): ... here.
3385
3386 2008-12-16  Joel Brobecker  <brobecker@adacore.com>
3387
3388         * gdb.texinfo (Omissions from Ada): Add missing GDB prompt in
3389         examples.
3390         (Additions to Ada): Likewise.  Add the missing opening and closing
3391         parenthesis of the GDB prompt in one of the examples.
3392
3393 2008-12-14  Joel Brobecker  <brobecker@adacore.com>
3394
3395         * gdb.texinfo (Omissions from Ada): Remove incorrect documentation
3396         about the result of 'Address not being of type System.Address.
3397         This problem has been fixed a while ago.
3398
3399 2008-12-02  Vladimir Prus  <vladimir@codesourcery.com>
3400
3401         MI non-stop and multiprocess docs.
3402
3403         * gdb.texinfo (GDB/MI): New section 'GDB/MI General Design'
3404         (GDB/MI Output Records): New section 'GDB/MI Frame Information'
3405         Adjust documentation for *stopped, document =thread-created,
3406         =thread-exited, =thread-group-created and =thread-group-exited.
3407         (GDB/MI Thread Commands): Document the 'state' field in
3408         -thread-info output.
3409         (GDB/MI Program Execution): Mention --all and --thread-group
3410         options.
3411         (GDB/MI Variable Objects): Describe floating and fixed variable
3412         objects.
3413         (GDB/MI Miscellaneous Commands): Document -list-thread-groups.
3414
3415 2008-12-02  Vladimir Prus  <vladimir@codesourcery.com>
3416
3417         * gdb.texinfo (Operating System Information): New appendix.
3418         (Operating System Auxiliary Information): Document 'info os processes'
3419         (Remote Configuration): Document 'osdata'
3420         (General Query Packets): Document qXfer:osdata:read.
3421
3422 2008-11-27  Tristan Gingold  <gingold@adacore.com>
3423
3424         * gdb.texinfo (Darwin): Document Darwin specific features.
3425
3426 2008-11-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
3427
3428         * gdbint.texinfo (Target Conditionals): Extend the
3429         gdbarch_breakpoint_from_pc description.
3430
3431 2008-11-22  Vladimir Prus  <vladimir@codesourcery.com>
3432
3433         * gdb.texinfo (M68K Features): Fix typo.
3434
3435 2008-11-18  Paul Pluzhnikov  <ppluzhnikov@google.com>
3436
3437         * gdb.texinfo (Symbols): Mention printing containing
3438         image name in "info symbol".
3439         (Maint translate-address): Likewise.
3440
3441 2008-11-18  Joel Brobecker  <brobecker@adacore.com>
3442
3443         * gdb.texinfo (Set Catchpoints): Remove the documentation of
3444         commands "catch load" and "catch unload".
3445
3446 2008-11-17  Vladimir Prus  <vladimir@codesourcery.com>
3447
3448         * gdb.texinfo (GDB/MI Async Records): Document
3449         =thread-selected.
3450
3451 2008-11-17  Vladimir Prus  <vladimir@codesourcery.com>
3452
3453         * observer.texi (new_inferior, inferior_exit): New observers.
3454
3455 2008-10-27  Pedro Alves  <pedro@codesourcery.com>
3456
3457         * gdbint.texinfo (Adding a New Target): Don't mention TDEPFILES,
3458         .mt files, TM_CLIBS or TM_CDEPS.
3459         (x86 Watchpoints): Don't mention TDEPFILES.
3460
3461 2008-10-24  Sandra Loosemore  <sandra@codesourcery.com>
3462
3463         * gdb.texinfo (Remote Protocol): Add new nodes to menu.
3464         (Overview): Mention notifications and non-stop mode behavior.
3465         (Packets): Update documentation of ?, vAttach, vCont, and vRun
3466         with non-stop mode behavior.  Add vStopped description.
3467         (Stop Reply Packets):  Update list of packets that return
3468         stop replies.  Mention non-stop behavior.
3469         (General Query Packets): Document QNonStop packet and associated
3470         qSupported query response.
3471         (Interrupts): Clarify multi-threaded behavior.  Mention non-stop
3472         behavior.
3473         (Notification Packets): New section.
3474         (Remote Non-Stop): New section.
3475         (File-I/O Overview): Mention non-stop behavior.
3476
3477 2008-10-24  Hui Zhu  <teawater@gmail.com>
3478             Pedro Alves  <pedro@codesourcery.com>
3479
3480         * gdb.texinfo (displaced-stepping): Describe the auto mode
3481         setting, and say it's the default.  This is now a mainstream
3482         setting instead of a maintenance setting.
3483
3484 2008-10-23  Pedro Alves  <pedro@codesourcery.com>
3485
3486         * observer.texi (thread_stop_requested): New.
3487
3488 2008-10-22  Joel Brobecker  <brobecker@adacore.com>
3489
3490         * gdb.texinfo (Ada Tasks, Ada Tasks and Core Files): New nodes.
3491         (Patching): Replace incorrect usage of @samp by @kbd.
3492
3493 2008-10-17  Michael Snyder  <msnyder@vmware.com>
3494
3495         * gdb.texinfo: Add documentation for reverse execution.
3496
3497 2008-10-16  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3498             Eli Zaretskii  <eliz@gnu.org>
3499
3500         * gdb.texinfo. (Values From Inferior): New subsubsection.
3501
3502 2008-10-06  Doug Evans  <dje@google.com>
3503
3504         * gdb.texinfo (set debug dwarf2-die): Document it.
3505
3506 2008-10-01  Joel Brobecker  <brobecker@adacore.com>
3507
3508         * gdb.texinfo (catch) [exception]: Document how to insert
3509         a breakpoint on user-defined exceptions when the exception
3510         name is identical to one of the language-defined ones.
3511
3512 2008-09-27  Tom Tromey  <tromey@redhat.com>
3513
3514         * gdb.texinfo (Macros): Remove text about stringification,
3515         varargs, and splicing.
3516
3517 2008-09-27  Tom Tromey  <tromey@redhat.com>
3518
3519         * gdbint.texinfo (Language Support): Remove text about omitting
3520         support for a language.
3521
3522 2008-09-23  Doug Evans  <dje@google.com>
3523
3524         * gdb.texinfo (info dcache): Update.
3525
3526 2008-09-22  Sandra Loosemore  <sandra@codesourcery.com>
3527
3528         * gdb.texinfo (Packets): Add info on thread-id syntax and
3529         multiprocess extensions.
3530         <D>: Document multiprocess form of packet.
3531         <H>: Use thread-id syntax.
3532         <T>: Likewise.
3533         <vCont>: Likewise.  Note this is required for multiprocess.
3534         <vKill>: New packet.
3535         (Stop Reply Packets) <T>: Use thread-id syntax.
3536         <W>: Document multiprocess form of reply.
3537         <X>: Likewise.
3538         (General Query Packets) <qC>: Use thread-id syntax.
3539         <qfThreadInfo>: Likewise.
3540         <qGetTLSAddr>: Likewise.
3541         <qP>: Likewise.
3542         <qSupported>: Add "multiprocess" feature.
3543         <qThreadExtraInfo>: Use thread-id syntax.
3544
3545 2008-09-22  Stan Shebs  <stan@codesourcery.com>
3546
3547         * gdb.texinfo (Inferiors): New section.
3548
3549 2008-09-12  Pedro Alves  <pedro@codesourcery.com>
3550
3551         * gdbint.texinfo (Native Debugging): Mention NAT_GENERATED_FILES.
3552
3553 2008-09-11  Ulrich Weigand  <uweigand@de.ibm.com>
3554
3555         * gdbint.texinfo (Target Conditionals): Remove documentation
3556         for gdbarch_name_of_malloc.
3557
3558 2008-09-03  Angela Marie Thomas <angela@releasedominatrix.com>
3559
3560         * gdb.texinfo (Interrupts): Mention TCP interface for
3561         sending BREAK.
3562
3563 2008-08-26  Ulrich Weigand  <uweigand@de.ibm.com>
3564
3565         * gdb.texinfo (Commands to Specify Files): Document "remote:"
3566         argument prefix to "set sysroot".
3567
3568 2008-08-21  Paul N. Hilfinger  <hilfinger@adacore.com>
3569
3570         * gdb.texinfo (Omissions from Ada): Describe new treatment of True
3571         and False.
3572
3573 2008-08-20  Vladimir Prus  <vladimir@codesourcery.com>
3574
3575         * gdb.textinfo (GDB/MI Miscellaneous Commands): Use @table
3576         for possible features of -list-features.
3577
3578 2008-08-19  Vladimir Prus  <vladimir@codesourcery.com>
3579
3580         * gdb.texinfo (Background execution): Adjust example
3581         (GDB/MI Miscellaneous Commands): Document -list-target-features.
3582
3583 2008-08-19  Vladimir Prus  <vladimir@codesourcery.com>
3584
3585         * doc/gdb.texinfo (PowerPC): Fix typo.
3586         (PowerPC features): Fix typo.
3587
3588 2008-08-18  Pedro Alves  <pedro@codesourcery.com>
3589
3590         * observer.texi (thread_ptid_changed): New.
3591
3592 2008-08-18  Luis Machado  <luisgpm@br.ibm.com>
3593
3594         * doc/gdb.texinfo (PowerPC): Mention Extended FPR's for POWER7.
3595         (PowerPC features): Mention feature set for VSX registers.
3596
3597 2008-08-13  Joel Brobecker  <brobecker@adacore.com>
3598
3599         * gdb.texinfo (Ada Mode Intro): Improve the documentation regarding
3600         the direct visibility of all names in user-written packages.
3601
3602 2008-08-13  Pedro Alves  <pedro@codesourcery.com>
3603
3604         * gdb.texinfo (breakpoint always-inserted) Describe the auto mode
3605         setting, and make it the default.
3606         (Non-Stop Mode): Remove "set breakpoints always-inserted 1" from
3607         non-stop script example.
3608
3609 2008-08-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3610
3611         * gdbint.texinfo (Raw and Virtual Register Representations): Fix
3612         reference to the "Using Different Register and Memory Data
3613         Representation" section.
3614
3615 2008-08-12  Sandra Loosemore  <sandra@codesourcery.com>
3616
3617         * gdb.texinfo (Remote Configuration): Document set remote noack-packet.
3618         (Remote Protocol): Add Packet Acknowledgment to menu.
3619         (Overview): Mention +/- can be disabled, and point to new section
3620         where this is discussed in detail.
3621         (General Query Packets): Document QStartNoAckMode packet, and
3622         corresponding qSupported reply.
3623         (Packet Acknowledgment): New section.
3624
3625 2008-08-11  Sandra Loosemore  <sandra@codesourcery.com>
3626             Pedro Alves  <pedro@codesourcery.com>
3627
3628         * gdb.texinfo (Threads): Move paragraph about automatic thread
3629         selection to All-Stop Mode subsection.
3630         (Thread Stops): Reorganize existing material into subsections.
3631         Add introductory blurb and menu.
3632         (Non-Stop Mode): New subsection.
3633         (Background Execution): New subsection.
3634         (Maintenance Commands): Add cross-references from async mode
3635         commands to the new Background Execution section.
3636
3637 2008-08-06  Tom Tromey  <tromey@redhat.com>
3638
3639         * gdb.texinfo (Extending GDB): New chapter.
3640         (Sequences): Demoted chapter, now a section under the new
3641         Extending GDB chapter.
3642         (Python): New section.
3643
3644 2008-07-31  Stan Shebs  <stan@codesourcery.com>
3645
3646         * gdbint.texinfo: Remove FUNCTION_EPILOGUE_SIZE.
3647
3648 2008-07-29  Stan Shebs  <stan@codesourcery.com>
3649
3650         * gdbint.texinfo: General round of cleanup and minor
3651         clarifications.
3652         (Breakpoint Handling): Remove mention of BREAKPOINT macro.
3653         (Longjmp Support): Update description to reflect how it is done
3654         for targets without using native header.
3655         (Symbol Handling): Add a little more general explanation.
3656         (COFF, ELF): Mention stabs encapsulation.
3657         (DWARF 3): New section.
3658         (Adding a New Host): Scrub out some obsolete bits.
3659         (Generic Host Support Files): Mention ser-pipe.c, ser-mingw.c.
3660         (Host Conditionals): Remove descriptions of NO_STD_REGS,
3661         HAVE_MMAP, HAVE_TERMIO, INT_MAX etc, LONGEST, HAVE_LONG_DOUBLE,
3662         PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, L_SET, SEEK_CUR,
3663         SEEK_SET, STOP_SIGNAL, USG.
3664         (Raw and Virtual Register Representations): Ditto for
3665         DEPRECATED_REGISTER_RAW_SIZE, DEPRECATED_REGISTER_VIRTUAL_SIZE,
3666         DEPRECATED_REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_TYPE.
3667         (Target Conditionals): Ditto for DEPRECATED_FP_REGNUM,
3668         DEPRECATED_FRAMELESS_FUNCTION_INVOCATION, DEPRECATED_FRAME_CHAIN,
3669         DEPRECATED_FRAME_CHAIN_VALID, DEPRECATED_FRAME_INIT_SAVED_REGS,
3670         DEPRECATED_FRAME_SAVED_PC, DEPRECATED_FUNCTION_START_OFFSET,
3671         DEPRECATED_REGISTER_VIRTUAL_SIZE,
3672         DEPRECATED_REGISTER_VIRTUAL_TYPE,
3673         DEPRECATED_USE_STRUCT_CONVENTION.
3674         Describe gdbarch_deprecated_fp_regnum.
3675         Update description of gdbarch_print_insn.
3676         (Adding a New Target): Scrub out obsolete bits.
3677         (Obsolete Conditionals): Remove entire section.
3678
3679 2008-07-25  Tom Tromey  <tromey@redhat.com>
3680
3681         * observer.texi (GDB Observers): Document new observers:
3682         breakpoint_created, breakpoint_deleted, breakpoint_modified,
3683         tracepoint_created, tracepoint_deleted, tracepoint_modified,
3684         architecture_changed.
3685
3686 2008-07-21  Stan Shebs  <stan@codesourcery.com>
3687
3688         * gdbint.texinfo: Refer to target_so_ops.in_dynsym_resolve_code
3689         instead of IN_SOLIB_DYNSYM_RESOLVE_CODE.
3690
3691 2008-07-21  Tom Tromey  <tromey@redhat.com>
3692
3693         * observer.texi (GDB Observers): Remove obsolete comment.
3694         <executable_changed>: Remove argument.
3695
3696 2008-07-18  Tom Tromey  <tromey@redhat.com>
3697
3698         * gdb.texinfo (Macros): Update.  Use @code rather than @command.
3699
3700 2008-07-10  Doug Evans  <dje@google.com>
3701
3702         * doc/gdb.texinfo: Document "set print symbol-loading on|off".
3703
3704 2008-07-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
3705
3706         * gdb.texinfo (Starting): Document "set disable-randomization".
3707
3708 2008-07-07  Andreas Schwab  <schwab@suse.de>
3709
3710         * gdb.texinfo (GDB/MI Target Manipulation): Fix last change.
3711
3712 2008-07-06  Vladimir Prus  <vladimir@codesourcery.com>
3713
3714         * gdb.texinfo (GDB/MI Target Manipulation): Add
3715         example of -target-attach.
3716
3717 2008-06-10  Vladimir Prus  <vladimir@codesourcery.com>
3718
3719         * observer.texi (target_resumed): New observer.
3720         * gdb.texinfo (GDB/MI Output Records): Document *running.
3721
3722 2008-06-06  Tom Tromey  <tromey@redhat.com>
3723
3724         * gdb.texinfo (Completion): Add field name example.
3725
3726 2008-06-06  Marc Khouzam  <marc.khouzam@ericsson.com>
3727
3728         * gdb.texinfo (GDB/MI Program Context): Added example
3729         to -exec-arguments
3730
3731 2008-06-05  Nick Roberts  <nickrob@snap.net.nz>
3732
3733         * annotate.texinfo (Multi-threaded Apps): Add entry for thread-changed
3734         annotation.
3735
3736 2008-06-05  Vladimir Prus  <vladimir@codesourcery.com>
3737             Nathan Sidwell  <nathan@codesourcery.com>
3738             Joseph Myers  <joseph@codesourcery.com>
3739
3740         * configure.ac: Include ../../config/acx.m4.  Use ACX_PKGVERSION
3741         and ACX_BUGURL.
3742         * configure: Regenerate.
3743         * Makefile.in (PKGVERSION, BUGURL_TEXI): Define.
3744         (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT.
3745         * gdb.texinfo: Use VERSION_PACKAGE and BUGURL.  Remove
3746         mailing-list-specific text about bug reporting unless
3747         BUGURL_DEFAULT.
3748
3749 2008-06-05  Pedro Alves  <pedro@codesourcery.com>
3750
3751         * gdb.texinfo (-target-select): Remove reference to target async.
3752         (Maintenance Commands): Document "maint set/show remote-async".
3753
3754 2008-06-04  Marc Khouzam  <marc.khouzam@ericsson.com>
3755
3756         * gdb.texinfo (GDB/MI File Transfer Commands): Typo
3757         in -target-file-get section.
3758
3759 2008-05-22  Pedro Alves  <pedro@codesourcery.com>
3760
3761         * gdb.texinfo (vAttach, vRun): Re-remove requirement of the stub
3762         killing the inferior when it is already debugging a process.
3763
3764 2008-05-21  Joel Brobecker  <brobecker@adacore.com>
3765
3766         * gdb.texinfo (Continuing and Stepping): Document the new "fin"
3767         abbreviation for "finish".
3768
3769 2008-05-21  Nick Roberts  <nickrob@snap.net.nz>
3770
3771         * annotate.texinfo (Multi-threaded Apps): New node for new annotation.
3772
3773 2008-05-15  Daniel Jacobowitz  <dan@codesourcery.com>
3774
3775         * gdbint.texinfo (Target Conditionals): Delete entry for
3776         gdbarch_dwarf_reg_to_regnum.
3777
3778 2008-05-09  Doug Evans  <dje@google.com>
3779
3780         * gdb.texinfo: Document "find" command, qSearch:memory packet.
3781
3782 2008-05-05  Doug Evans  <dje@google.com>
3783
3784         * gdb.texinfo (disassemble): Document /m modifier.
3785
3786 2008-05-05  Vladimir Prus  <vladimir@codesourcery.com>
3787
3788         * gdb.texinfo (Maintenance Commands): Clarify that "maint time"
3789         will not report the time of commands that run the target.
3790
3791 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
3792
3793         * gdb.texinfo (GDB/MI Output Records): Add
3794         missing semicolon.
3795
3796 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
3797
3798         * gdb.texinfo (GDB/MI Output Records):
3799         Document =thread-create and =thread-exited.
3800
3801 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
3802
3803         * gdb.texinfo (GDB/MI Development and Front Ends):
3804         Remove mention of dmi-discuss.
3805
3806 2008-05-03  Pedro Alves  <pedro@codesourcery.com>
3807
3808         * observer.texi (thread_exit): New.
3809
3810 2008-05-02  Pedro Alves  <pedro@codesourcery.com>
3811
3812         * gdb.texinfo (Debugging Output): Document "set/show debug
3813         displaced".
3814         (Maintenance Commands): Document "maint set/show
3815         can-use-displaced-stepping".
3816
3817 2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>
3818
3819         * gdb.texinfo (ARM): Document set/show arm fallback-mode
3820         and set/show arm force-mode.
3821
3822 2008-05-02  Andreas Schwab  <schwab@suse.de>
3823
3824         * gdbint.texinfo (Algorithms): Describe
3825         target_watchpoint_addr_within_range.
3826
3827 2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>
3828
3829         * gdbint.texinfo (Stack Frames): New chapter.
3830         (Algorithms): Move Frames text to the new chapter.
3831         (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS.  Document
3832         gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
3833
3834 2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>
3835
3836         * gdb.texinfo (GDB/MI Output Syntax): Clarify that async
3837         output does not necessary include any tokens.
3838
3839 2008-04-22  Corinna Vinschen  <vinschen@redhat.com>
3840
3841         * gdb.texinfo (Set SH Calling convention): New @item.
3842         (Show SH Calling convention): Ditto.
3843
3844 2008-04-22  Markus Deuling  <deuling@de.ibm.com>
3845
3846         * gdb.texinfo (Fortran Operators): Describe '%' operator.
3847
3848 2008-04-20  Eli Zaretskii  <eliz@gnu.org>
3849
3850         * gdb.texinfo (Set Breaks): Mention that multiple location
3851         breakpoints need line number info.  Add index entries.
3852
3853 2008-04-19  Craig Silverstein  <csilvers@google.com>
3854
3855         * gdb.texinfo (Requirements): Add an optional requirement on
3856         zlib.
3857         * gdbint.texinfo (Debugging File Formats): Add new subsection for
3858         Compressed DWARF 2.
3859
3860 2008-04-16  Aleksandar Ristovski  <aristovski@qnx.com>
3861
3862         * gdb.texinfo (GDB/MI Simple Examples): Added 'disp' field to the
3863         sample output for 'stopped,reason="breakpoint-hit"' message.
3864         (GDB/MI Program Execution): Likewise.
3865
3866 2008-04-09  Marc Khouzam  <marc.khouzam@ericsson.com>
3867
3868         * gdb.texinfo (GDB/MI Variable Objects): Add anchor to
3869         -var-set-format.  Add -f option to -var-evaluate-expression.
3870
3871 2008-04-03  Joel Brobecker  <brobecker@adacore.com>
3872
3873         * gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside
3874         new node "Ambiguous Expressions".  Replace references to this
3875         node by references to "Ambiguous Expressions" throughout.
3876         (Ambiguous Expressions): New node.
3877
3878 2008-03-26  Daniel Jacobowitz  <dan@codesourcery.com>
3879
3880         * gdb.texinfo (MIPS Features, PowerPC Features): Add @node.
3881
3882 2008-03-21  Pedro Alves  <pedro@codesourcery.com>
3883
3884         * gdb.texinfo (Debugging Output): Document
3885         "set/show debug lin-lwp-async".
3886         (Maintenance Commands): Document "maint set/show linux-async".
3887
3888 2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>
3889
3890         * gdb.texinfo (Expressions): Update description of malloced arrays.
3891
3892 2008-03-15  Vladimir Prus  <vladimir@codesourcery.com>
3893
3894         * gdb.texinfo (Thread Commands): Document
3895         -thread-info.  Remove -thread-list-all-threads.
3896
3897 2008-03-14  Pedro Alves  <pedro@codesourcery.com>
3898             Sandra Loosemore  <sandra@codesourcery.com>
3899
3900         * gdb.texinfo (Library List Format): Update to mention the
3901         possibility to pass section addresses instead of segment
3902         addresses.
3903
3904 2008-03-10  Daniel Jacobowitz  <dan@codesourcery.com>
3905
3906         * gdb.texinfo (Starting): Document "set exec-wrapper".
3907         (Server): Document gdbserver --wrapper.
3908
3909 2008-03-03  Daniel Jacobowitz  <dan@codesourcery.com>
3910
3911         * gdb.texinfo (Set Watchpoints): Mention watchpoints on
3912         unreadable memory.  Delete obsolete SPARClite reference.
3913
3914 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
3915
3916         * gdb.texinfo (Starting): Mention always-running targets.
3917         (Target Commands): Add an anchor for load.
3918         (Connecting): Explain continue instead of run.
3919
3920 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
3921
3922         * gdb.texinfo (Debugging Output): Document "set debug timestamp".
3923
3924 2008-02-26  Nick Roberts  <nickrob@snap.net.nz>
3925
3926         * gdb.texinfo (Set Breaks): Revert description of Enb column of
3927         breakpoint table.
3928
3929 2008-02-19  Pedro Alves  <pedro@codesourcery.com>
3930
3931         * gdb.texinfo (vAttach, vRun): Remove requirement of the stub
3932         killing the inferior when it is already debugging a process.
3933
3934 2008-02-13  Markus Deuling  <deuling@de.ibm.com>
3935
3936         * gdbint.texinfo (Build Script): New section. Mention new build script
3937         gdb_buildall.sh.
3938
3939 2008-02-01  Jim Blandy  <jimb@red-bean.com>
3940
3941         * gdb.texinfo (Help): Summarize 'info args' correctly.
3942
3943 2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
3944
3945         * gdb.texinfo: (Decimal Floating Point): Mention pseudo-registers
3946         available in PowerPC architecture.
3947         (Embedded Processors): Change node name of PowerPC item in menu.
3948         (PowerPC): Rename to...
3949         (PowerPC Embedded): this.
3950         (Architectures): Add new PowerPC item in menu.
3951         (PowerPC): New node.
3952
3953 2008-01-30  Daniel Jacobowitz  <dan@codesourcery.com>
3954
3955         * gdb.texinfo (Multi-Process Mode for gdbserver): Use @kbd for
3956         commands.
3957
3958 2008-01-30  Daniel Jacobowitz  <dan@codesourcery.com>
3959
3960         * gdb.texinfo (Setting Catchpoints): Mention features
3961         supported on GNU/Linux.
3962
3963 2008-01-30  Nick Roberts  <nickrob@snap.net.nz>
3964
3965         * gdb.texinfo (GDB/MI File Commands): Describe new output
3966         field for MI command -file-list-exec-source-file.
3967
3968 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
3969
3970         * gdb.texinfo (Using the `gdbserver' Program): Add security
3971         warning.  Rearrange into subsections and subsubsections.  Document
3972         --multi and --debug.  Correct --with-sysroot typo.  Update --attach
3973         usage.  Make load reference clearer.  Document monitor exit.
3974         (Remote Configuration): Document set remote exec-file, attach-packet,
3975         and run-packet.
3976         (Packets): Document vAttach and vRun.
3977
3978 2008-01-29  Nick Roberts  <nickrob@snap.net.nz>
3979
3980         * gdb.texinfo (Processes): Mention process command.
3981         detach-on-follow -> detach-on-fork.
3982
3983 2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
3984
3985         * gdbint.texinfo (Native Conditionals): Remove
3986         SHELL_COMMAND_CONCAT and SHELL_FILE.
3987
3988 2008-01-26  Eli Zaretskii  <eliz@gnu.org>
3989
3990         * gdb.texinfo (Specify Location): Improve wording.
3991
3992 2008-01-23  Chris Demetriou  <cgd@google.com>
3993
3994         * gdb.texinfo (Threads): Document new "set print thread-events"
3995         and "show print thread-events" commands.
3996
3997 2008-01-19  Eli Zaretskii  <eliz@gnu.org>
3998
3999         * gdb.texinfo (Specify Location): New section.
4000         (Delete Breaks, Edit, Set Breaks): Remove description of
4001         locations.  Instead, add a reference to "Specify Location".
4002         (Machine Code, Jumping, Thread Stops, Continuing and Stepping)
4003         (Symbols): Refer to "Specify Location" for the valid forms of
4004         linespecs and locations.
4005
4006 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
4007
4008         * gdbint.texinfo (Target Conditionals): Replace the description of
4009         BITS_BIG_ENDIAN with a description of gdbarch_bits_big_endian.
4010
4011 2008-01-12  Paul Hilfinger  <hilfinger@adacore.com>
4012
4013         * gdb.texinfo (C Operators): Remove incorrect parenthetical comment
4014         about &&var, which is rejected by the expression parser.
4015
4016 2008-01-09  Luis Machado  <luisgpm@br.ibm.com>
4017
4018         * gdb.texinfo (Output): Update documentation on using printf with DFP
4019         types.
4020
4021 2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
4022
4023         * gdb.texinfo (C and C++): Add Decimal Floating Point format
4024         subsubsection.
4025         (Decimal Floating Point format): New subsubsection.
4026
4027 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
4028
4029         * gdb.texinfo (File Options): Remove mention of the attempt to
4030         open a core file with the -p option.  Don't list -c as a valid
4031         option to attach to a process.
4032
4033 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
4034
4035         * gdbint.texinfo (Host Conditionals): Remove mention of
4036         ALIGN_STACK_ON_ENTRY.
4037
4038 2008-01-05  Joel Brobecker  <brobecker@adacore.com>
4039
4040         * gdbint.texinfo (Start of New Year Procedure): Add item
4041         describing how to update the source and documentation copyright
4042         notices.
4043
4044 2007-12-18  Jim Blandy  <jimb@codesourcery.com>
4045
4046         * gdb.texinfo (Set Watchpoints): Integrate per-thread
4047         watchpoint explanation into the main description of the watchpoint
4048         command; update synopses of 'watch', 'rwatch', and 'awatch'
4049         commands.
4050
4051 2007-12-18  Vladimir Prus  <vladimir@codesourcery.com>
4052
4053         * gdb.texinfo (Miscellaneous gdb/mi Commands):
4054         Document 'pending-breakpoints' feature of
4055         -list-features.
4056
4057 2007-12-17  Luis Machado  <luisgpm@br.ibm.com>
4058
4059         * gdb.texinfo: Add new parameter's description.
4060
4061 2007-12-16  Daniel Jacobowitz  <dan@codesourcery.com>
4062
4063         * gdb.texinfo (Overview): Clarify run-length encoding
4064         example.  Remove the restriction on "+" and "-" characters.
4065
4066 2007-12-15  Eli Zaretskii  <eliz@gnu.org>
4067
4068         * gdb.texinfo (Host I/O Packets): Fix xref syntax.
4069
4070 2007-12-14  Vladimir Prus  <vladimir@codesourcery.com>
4071
4072         * gdb.texinfo (GDB/MI Breakpoint Commands): Document
4073         the -f option for -break-insert, remove -r option,
4074         and clarify specification of location.
4075
4076 2007-11-30  Daniel Jacobowitz  <dan@codesourcery.com>
4077
4078         * gdb.texinfo (Debugging Programs with Multiple Processes): Correct
4079         formatting.
4080         (Remote Debugging): Add File Transfer section.
4081         (Remote Configuration): Document Host I/O packets.
4082         (GDB/MI): Add GDB/MI File Transfer Commands section.
4083         (Host I/O Packets): New section in "Remote Protocol".
4084         (Packets): Add vFile.
4085
4086 2007-11-17  Eli Zaretskii  <eliz@gnu.org>
4087
4088         * gdb.texinfo (Set Breaks, Disabling): Clarify behavior of
4089         breakpoints with multiple locations.
4090         (Breakpoint Menus): Improve wording.
4091         (Output): Fix last change.
4092
4093 2007-11-17  Ulrich Weigand  <uweigand@de.ibm.com>
4094
4095         * Makefile.in (Makefile): Do not depend on target_makefile_frag.
4096
4097 2007-11-15  Doug Evans  <dje@google.com>
4098
4099         * gdb.texinfo (Symbols): Update output of "maint info symtabs".
4100
4101 2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>
4102
4103         * gdbint.texinfo (Native Conditionals): Remove
4104         mention of CLEAR_SOLIB.
4105
4106 2007-11-11  Joel Brobecker  <brobecker@adacore.com>
4107
4108         * gdb.texinfo (Print Settings): Add documentation for "set/show
4109         print frame-arguments".
4110
4111 2007-11-05  Luis Machado  <luisgpm@br.ibm.com>
4112
4113         * gdb.texinfo (Output): Update printf command's description.
4114
4115 2007-10-30  Daniel Jacobowitz  <dan@codesourcery.com>
4116
4117         * gdb.texinfo (PowerPC): Document "set powerpc vector-abi" and "set
4118         powerpc soft-float".
4119
4120 2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>
4121
4122         * gdb.texinfo (Files): Correct formatting.  Mention Expat
4123         requirement.
4124         (Requirements for Building GDB): Expand the list of Expat
4125         uses.
4126         (Library List Format, Memory Map Format): Mention Expat.
4127         (Target Descriptions): Update Expat wording.
4128
4129 2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>
4130
4131         * gdbint.texinfo (Register and Memory Data, Target Conditionals):
4132         Document that gdbarch_convert_register_p should return zero for no-op
4133         conversions.
4134
4135 2007-10-22  Ulrich Weigand  <uweigand@de.ibm.com>
4136
4137         * gdbint.texi (Compiler Characteristics): Move documentation
4138         of set_gdbarch_sofun_address_maybe_missing back to ...
4139         (Target Conditionals): ... here to fix build break.
4140
4141 2007-10-19  Ulrich Weigand  <uweigand@de.ibm.com>
4142
4143         * gdbint.texi (Target Conditionals): Remove documentation of
4144         SOFUN_ADDRESS_MAYBE_MISSING, replaced by ...
4145         (Compiler Characteristics): ... documentation of
4146         set_gdbarch_sofun_address_maybe_missing.
4147
4148 2007-10-17  Daniel Jacobowitz  <dan@codesourcery.com>
4149
4150         * gdbint.texinfo (Target Conditionals): Use
4151         frame_unwind_register_unsigned in examples instead of
4152         frame_unwind_unsigned_register.
4153
4154 2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>
4155
4156         * gdb.texinfo (Predefined Target Types): Add int128
4157         and uint128.
4158         (Standard Target Features): Add PowerPC features.
4159
4160 2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>
4161
4162         * gdb.texinfo (Maintenance Commands): Document "maint print c-tdesc".
4163
4164 2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>
4165
4166         * gdbint.texi (Target Conditionals): Remove documentation
4167         of and references to DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS,
4168         gdbarch_extract_return_value, and gdbarch_store_return_value.
4169
4170 2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>
4171
4172         * gdbint.texi (Target Conditionals): Remove documentation of
4173         and references to DEPRECATED_REG_STRUCT_HAS_ADDR.
4174
4175 2007-10-11  Kazu Hirata  <kazu@codesourcery.com>
4176
4177         * gdb.texinfo: Mention that inaccessible-by-default is on by
4178         default.
4179
4180 2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>
4181
4182         * gdbint.texinfo (Target Conditionals): Remove VARIABLES_INSIDE_BLOCK.
4183
4184 2007-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
4185
4186         * gdb.texinfo (Setting Watchpoints): Adjust warning text about
4187         multi-threaded watchpoints.
4188         * gdbint.texinfo (Watchpoints): Describe how watchpoints are
4189         checked.  Describe sticky notification.  Expand description
4190         of steppable and continuable watchpoints.
4191         (Watchpoints and Threads): New subsection.
4192
4193 2007-09-28  Vladimir Prus  <vladimir@codesourcery.com>
4194
4195         * gdb.texinfo (Setting Breakpoints): Revise
4196         documentation for pending breakpoints.  Document
4197         breakpoints with multiple locations.
4198
4199 2007-09-19  Vladimir Prus  <vladimir@codesourcery.com>
4200
4201         * gdb.texinfo (Miscellaneous gdb/mi Commands):
4202         Document -list-features.
4203
4204 2007-09-15  Eli Zaretskii  <eliz@gnu.org>
4205
4206         * gdb.texinfo (Output): Spell out which features of C's printf are
4207         not supported by GDB's printf.
4208         (Separate Debug Files): More accurate wording regarding build ID
4209         and a reference to the ld manual rather than the Fedora wiki.
4210
4211 2007-09-04  Daniel Jacobowitz  <dan@codesourcery.com>
4212             Jim Blandy  <jimb@codesourcery.com>
4213
4214         * gdb.texinfo (Output Formats): Update 'c' description.  Describe 's'.
4215         (Examining Memory): Update mentions of the 's' format.
4216         (Automatic Display): Likewise.
4217
4218 2007-09-02  Daniel Jacobowitz  <dan@codesourcery.com>
4219
4220         * gdb.texinfo: Update the FSF's Back-Cover Text.
4221
4222 2007-09-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
4223             Eli Zaretskii  <eliz@gnu.org>
4224
4225         * gdb.texinfo (Separate Debug Files): Cosmetic quoting removal.
4226         Fixed the ``build ID'' name.  New binaries build instructions for the
4227         build ID inclusion.  Explain how the commands are specific to the build
4228         ID vs. debug link.
4229
4230 2007-09-01  Eli Zaretskii  <eliz@gnu.org>
4231
4232         * gdb.texinfo (Separate Debug Files): Fix last change.  Add
4233         indexing for ``build ID'' support.
4234
4235 2007-09-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
4236
4237         * gdb.texinfo (Separate Debug Files): Included a BUILD ID description.
4238         Enlisted BUILD ID to the debug file searching example.
4239         Included a BUILD ID `.note.gnu.build-id' section description.
4240         Updated/added the debug files splitting instructions for OBJCOPY.
4241
4242 2007-08-31  Vladimir Prus  <vladimir@codesourcery.com>
4243
4244         * gdb.texinfo (Variable Objects): Adjust docs
4245         for -var-info-expression and document
4246         -var-info-path-expression.
4247
4248 2007-08-20  Jim Blandy  <jimb@codesourcery.com>
4249
4250         * gdb.texinfo (Top): Dedicate manual to the memory of Fred Fish.
4251         (title page): Include the dedication in the printed manual, as a
4252         separate page after the copyright notice.
4253
4254         * gdb.texinfo (The F Reply Packet): Avoid confusing texi2html:
4255         don't break a @var across a line.
4256
4257 2007-07-25  Maciej W. Rozycki  <macro@mips.com>
4258
4259         * Makefile.in (MAKEHTMLFLAGS): Also search the current directory
4260         for include files.
4261
4262 2007-07-12  Nick Roberts  <nickrob@snap.net.nz>
4263
4264         * gdb.texinfo (Server Prefix): New node.  Adapt from existing node
4265         in annotate.texinfo.
4266         (Command History): Link to new node.
4267
4268 2007-07-05  Markus Deuling  <deuling@de.ibm.com>
4269
4270         * gdbint.texinfo (PC_LOAD_SEGMENT): Remove description.
4271
4272 2007-07-05  Eli Zaretskii  <eliz@gnu.org>
4273
4274         * gdbint.texinfo (Target Conditionals): Fix last change.
4275
4276 2007-07-03  Markus Deuling  <deuling@de.ibm.com>
4277
4278         * gdb.texinfo: Replace following macros by their appropriate gdbarch
4279         routines:
4280         (TARGET_CHAR_SIGNED, CALL_DUMMY_LOCATION, CANNOT_FETCH_REGISTER)
4281         (CANNOT_STORE_REGISTER, GET_LONGJMP_TARGET, POINTER_TO_ADDRESS)
4282         (ADDRESS_TO_POINTER, INNER_THAN, FRAME_NUM_ARGS)
4283         (HAVE_NONSTEPPABLE_WATCHPOINT, TARGET_SHORT_BIT, TARGET_INT_BIT)
4284         (TARGET_LONG_BIT, TARGET_LONG_LONG_BIT, TARGET_FLOAT_BIT)
4285         (TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_PTR_BIT
4286         (TARGET_ADDR_BIT, SP_REGNUM, PC_REGNUM, PS_REGNUM, FP0_REGNUM)
4287         (STAB_REG_TO_REGNUM, ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM)
4288         (SDB_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM, BELIEVE_PCC_PROMOTION)
4289         (CONVERT_REGISTER_P, REGISTER_TO_VALUE, VALUE_TO_REGISTER)
4290         (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER, EXTRACT_RETURN_VALUE)
4291         (STORE_RETURN_VALUE, SKIP_PROLOGUE, MEMORY_INSERT_BREAKPOINT)
4292         (BREAKPOINT_FROM_PC, MEMORY_REMOVE_BREAKPOINT, DECR_PC_AFTER_BREAK)
4293         (ADDR_BITS_REMOVE, TARGET_PRINT_INSN, SKIP_TRAMPOLINE_CODE)
4294         (IN_SOLIB_RETURN_TRAMPOLINE, NAME_OF_MALLOC, ADDRESS_CLASS_TYPE_FLAGS)
4295         (ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, ADDRESS_CLASS_TYPE_FLAGS_P).
4296         (ADDRESS_CLASS_NAME_to_TYPE_FLAGS, ADJUST_BREAKPOINT_ADDRESS)
4297         (PRINT_FLOAT_INFO, PRINT_VECTOR_INFO, INTEGER_TO_ADDRESS)
4298         (SKIP_PERMANENT_BREAKPOINT, TARGET_VIRTUAL_FRAME_POINTER)
4299         (SOFTWARE_SINGLE_STEP_P)
4300
4301         (push_dummy_call, stabs_argument_has_addr, unwind_sp, unwind_pc)
4302         (print_registers_info, push_dummy_code, unwind_dummy_id): Rework
4303
4304         (REGISTER_CONVERT_TO_TYPE, END_OF_TEXT_DEFAULT, GDB_MULTI_ARCH)
4305         (GDB_TARGET_IS_HPPA, DEPRECATED_GET_SAVED_REGISTER)
4306         (SYMBOLS_CAN_START_WITH_DOLLAR, DEPRECATED_INIT_EXTRA_FRAME_INFO)
4307         (DEPRECATED_INIT_FRAME_PC, DEPRECATED_SIGTRAMP_START)
4308         (IN_SOLIB_CALL_TRAMPOLINE, NO_HIF_SUPPORT, REGISTER_CONVERTIBLE)
4309         (DEPRECATED_REGISTER_RAW_SIZE, PARM_BOUNDARY, DEPRECATED_STACK_ALIGN)
4310         (PROLOGUE_FIRSTLINE_OVERLAP, DEPRECATED_POP_FRAME, STEP_SKIPS_DELAY)
4311         (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT)
4312         (OS9K_VARIABLES_INSIDE_BLOCK, KERNEL_U_ADDR, KERNEL_U_ADDR_HPUX)
4313         (REGISTER_U_ADDR, U_REGS_OFFSET, DEBUG_PTRACE): Remove description.
4314
4315         (Converting an existing Target Architecture to Multi-arch): Remove
4316          section.
4317
4318         (gdbarch_unwind_pc, gdbarch_unwind_sp): Renew code example.
4319         (gdbarch_addr_bits_remove): Add code example.
4320
4321         * gdb.texinfo: Replace REGISTER_NAME by gdbarch_register_name.
4322
4323 2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>
4324
4325         * gdb.texinfo (Remote Configuration): Document library-info-packet.
4326         Add other missing entries.  Adjust the table size to fit.
4327         (Stop Reply Packets): Use @itemize instead of @enumerate.  Document
4328         stop reasons including the new "library" event.
4329         (General Query Packets): Adjust table widths for qSupported.  Mention
4330         qXfer:libraries:read reply to qSupported and document the new packet.
4331         (Library List Format): New section.
4332
4333 2007-07-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
4334
4335         * gdb.texinfo (Attach): Fixed GDB exit inferior detachment.
4336
4337 2007-06-28  Michael Snyder  <msnyder@svkmacdonelllnx>
4338
4339         * gdbint.texinfo (Table, Tuple and List Functions) Fix typo.
4340
4341 2007-06-25  Nick Roberts  <nickrob@snap.net.nz>
4342
4343         * gdbint.texinfo (Register and Memory Data): Break sections
4344         into nodes and add a menu.
4345
4346 2007-06-21  Maciej W. Rozycki  <macro@mips.com>
4347
4348         * gdb.texinfo (Examining Memory): Document the new behaviour.
4349
4350 2007-06-21  Vladimir Prus  <vladimir@codesourcery.com>
4351
4352         * gdb.texinfo (Standard Target Features): Document
4353         m68k features.
4354
4355 2007-06-18  Daniel Jacobowitz  <dan@codesourcery.com>
4356
4357         * gdb.texinfo (General Query Packets): Document qOffsets changes.
4358
4359 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
4360
4361         * gdb.texinfo (Target Description Format): Add version attribute
4362         for <target>.
4363
4364 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
4365
4366         * gdb.texinfo (MIPS Features): Document org.gnu.gdb.mips.linux.
4367
4368 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
4369
4370         * gdb.texinfo (MIPS Features): New subsection.
4371
4372 2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
4373             Markus Deuling  <deuling@de.ibm.com>
4374
4375         * gdb.texinfo (General Query Packets): Document qXfer:spu:read
4376         and qXfer:spu:write packets and mention them under qSupported.
4377
4378 2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
4379             Markus Deuling  <deuling@de.ibm.com>
4380
4381         * gdb.texinfo (Architectures): Add new SPU section to document
4382         Cell Broadband Engine SPU architecture specific commands.
4383
4384 2007-06-09  Vladimir Prus  <vladimir@codesourcery.com>
4385
4386         * gdb.texinfo (GDB/MI Variable Objects): Editorial
4387         comments.
4388
4389 2007-06-07  Nick Roberts  <nickrob@snap.net.nz>
4390
4391         * gdb.texinfo (Emacs): Describe GDB under Emacs 22.1.
4392
4393 2007-05-29  Jim Blandy  <jimb@codesourcery.com>
4394
4395         * gdb.texinfo (Overview): Doc fix.
4396
4397 2007-05-22  Maciej W. Rozycki  <macro@mips.com>
4398
4399         * gdb.texinfo (Remote Configuration): Document "set/show
4400         remoteflow".
4401
4402 2007-05-16  Daniel Jacobowitz  <dan@codesourcery.com>
4403
4404         * gdb.texinfo (MIPS): Remove documentation for set mips
4405         saved-gpreg-size, show mips saved-gpreg-size, and set mips
4406         stack-arg-size.
4407
4408 2007-05-14  Bob Wilson  <bob.wilson@acm.org>
4409
4410         * all-cfg.texi (GDBTUI): New.
4411         * gdb.texinfo (Mode Options): Use GDBTUI variable.
4412         (TUI, TUI Overview, TUI Keys, TUI Single Key Mode, TUI Commands)
4413         (TUI Configuration): Edit to improve clarity and fix problems of
4414         both style and content.
4415
4416 2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>
4417
4418         * observer.texi (GDB Observers): New observer "new_objfile".
4419
4420 2007-05-08  Ulrich Weigand  <uweigand@de.ibm.com>
4421
4422         * gdbint.texinfo (Native Conditionals): Remove USE_PROC_FS.
4423
4424 2007-04-14  Vladimir Prus  <vladimir@codesourcery.com>
4425
4426         * gdb.texinfo (GDB/MI Variable Objects): Document
4427         frozen variables objects.
4428
4429 2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>
4430
4431         * gdb.texinfo (Memory): Reference Remote Debugging chapter.
4432         (Character Sets, Caching Data of Remote Targets): Likewise.
4433         (Targets): Delete Remote node.  Move its text...
4434         (Debugging Remote Programs): ...to here.  Delete description
4435         of the "remote" command.
4436         (Remote configuration): Delete description of "set remotedevice"
4437         and "show remotedevice".
4438         (Embedded Processors): Delete H8/300, H8/500, and SH nodes.
4439
4440 2007-04-11  Bob Wilson  <bob.wilson@acm.org>
4441
4442         * gdb.texinfo (Contributors, Continuing and Stepping)
4443         (Fortran Defaults, HPPA, TUI, TUI Commands, Configure Options)
4444         (General Query Packets, File-I/O Remote Protocol Extension)
4445         (Protocol Basics, The F Reply Packet, Write)
4446         (Protocol-specific Representation of Datatypes, Memory Transfer):
4447         Fix hyphenation, punctuation and grammar problems.
4448         (Cygwin Native): Likewise.  Also fix misuse of @pxref and use
4449         'section' instead of 'subsection' in the text.
4450         (Non-debug DLL Symbols): Avoid 'subsubsection' in the text.
4451         (i386): Remove period from section name.
4452         (Installing GDB, Requirements, Running Configure,  Separate Objdir)
4453         (Config Names, Configure Options): Use @file{configure}.
4454
4455 2007-04-11  Daniel Jacobowitz  <dan@codesourcery.com>
4456
4457         * gdbint.texinfo (Writing Tests): Mention gdb_test_multiple
4458         and tab expansion.
4459
4460 2007-04-10  Daniel Jacobowitz  <dan@codesourcery.com>
4461
4462         * gdbint.texinfo (SOM): Correct location of the SOM reader.
4463
4464 2007-04-02  Bob Wilson  <bob.wilson@acm.org>
4465
4466         * gdb.texinfo: Consistently capitalize all significant words in
4467         node names, chapter titles, section titles, and headings.  Update
4468         cross references to match.
4469         (Starting and Stopping Trace Experiment): Make node name plural.
4470         (Breakpoint related warnings): Hyphenate "Breakpoint-related".
4471
4472 2007-03-30  Pedro Alves  <pedro_alves@portugalmail.pt>
4473
4474         * gdb.texinfo (WinCE): Delete obsolete subsection.
4475
4476 2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>
4477
4478         * gdb.texinfo (M68K): Remove obsolete ROM monitors.
4479         * gdbint.texinfo (DWARF 1): Delete section and other dwarfread.c
4480         references.
4481
4482 2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>
4483
4484         * gdb.texinfo (Startup): Delete references to some alternate
4485         names for .gdbinit.
4486         (Thread): Remove LynxOS reference.
4487         (Tandem ST2000): Delete target-specific documentation.
4488         * gdbint.texinfo (Symbol Handling): Remove mention of NLM.
4489         (Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
4490         and GDB_OSABI_LYNXOS.
4491
4492 2007-03-29  Ulrich Weigand  <uweigand@de.ibm.com>
4493
4494         * gdbint.texi (Native Conditionals): Remove PTRACE_ARG3_TYPE.
4495
4496 2007-03-27  Ulrich Weigand  <uweigand@de.ibm.com>
4497
4498         * gdbint.texinfo (Target Conditionals): Remove mention of
4499         DEPRECATED_REMOTE_BREAKPOINT, DEPRECATED_BIG_REMOTE_BREAKPOINT,
4500         and DEPRECATED_LITTLE_REMOTE_BREAKPOINT.
4501
4502 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
4503
4504         * Makefile.in: Add "pdfdir" installation
4505         directory, PDFTEX macro, support for "install-pdf" target,
4506         and rules for making a pdf version of refcard.texi.
4507         * refcard.tex: Specify paper size for PDF output.
4508
4509 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4510
4511         * gdb.texinfo (Omissions from Ada, Additions to Ada): Wrap long lines.
4512
4513 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4514
4515         * gdb.texinfo (Invoking GDB): Use @value{GDBP}.
4516         (Source Path, Character Sets, Macros, Define)
4517         (GDB/MI Result Records, GDB/MI Simple Examples)
4518         (GDB/MI Program Execution, GDB/MI File Commands)
4519         (Maintenance Commands, Packets, File-I/O Overview): Use @value{GDBN}.
4520         (Bug Reporting): Use @value{GCC}.
4521
4522 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4523
4524         * gdb.texinfo (Help): Fix formatting of examples.
4525         (Variables): Use @ifnotinfo instead of @iftex.
4526         (Non-debug DLL symbols): Use @ref instead of @pxref.
4527         (Sparclet File): Use @samp instead of quotes.
4528
4529 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4530
4531         * gdb.texinfo (Variables, C): Update cross reference to GCC docs.
4532
4533 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4534
4535         * gdb.texinfo (Top): Move TUI and Annotations menu entries to match
4536         the order of the nodes.
4537         (C Operators, C Constants, Debugging C): Remove extra menus.
4538         (Method Names in Commands): Do not specify next/prev/up nodes.
4539
4540 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
4541
4542         * gdb.texinfo (File Options): Add missing parenthesis.
4543         (Breakpoints, Special Fortran commands, PowerPC): Fix typos.
4544
4545 2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
4546
4547         * gdb.texinfo (Monitor commands for gdbserver): New subsection.
4548
4549 2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
4550
4551         * gdb.texinfo (Standard Target Features): Mention
4552         case insensitivity.
4553         (ARM Features): Describe org.gnu.gdb.xscale.iwmmxt.
4554
4555 2007-02-18  Nick Roberts  <nickrob@snap.net.nz>
4556
4557         * gdb.texinfo (Top): Put Appendix A after numbered sections.
4558         (Files): Add section name to argument list for pxref.
4559         (Non-debug DLL symbols): Don't use `see' for pxref.
4560         (Embedded Processors): Fix typo.
4561         (GDB/MI Breakpoint Commands): Execution commands generate
4562         *stopped not ^done.
4563
4564 2007-02-13  Nick Roberts  <nickrob@snap.net.nz>
4565
4566         * gdb.texinfo (GDB/MI Variable Objects): Describe meanings of
4567         values for in_scope.  Mention that only root variables can be
4568         updated.
4569         (GDB/MI Development and Front Ends): Explain new values may be
4570         added to existing fields.
4571
4572 2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>
4573
4574         * gdb.texinfo (-target-disconnect): Use @smallexample.
4575         (Requirements): Add anchor for Expat.  Update description.
4576         (Target Descriptions): Mention Expat.
4577         (Target Description Format): Document new elements.  Use
4578         @smallexample.
4579         (Predefined Target Types, Standard Target Features): New sections.
4580         * gdbint.texinfo (Target Descriptions): New section.
4581
4582 2007-02-07  Daniel Jacobowitz  <dan@codesourcery.com>
4583
4584         * gdb.texinfo (Target Description Format): Add section on XInclude.
4585
4586 2006-02-03  Nick Roberts  <nickrob@snap.net.nz>
4587
4588         * gdb.texinfo (GDB/MI Miscellaneous Commands): Describe the new
4589         command -enable-timings.
4590
4591 2007-02-02  Markus Deuling  <deuling@de.ibm.com>  (tiny change)
4592
4593         * gdbint.texinfo (Operation System ABI Variant Handling): Update
4594         descriptions for new/deleted elements in gdb_osabi.  Add missing
4595         description for function generic_elf_osabi_sniff_abi_tag_sections.
4596
4597 2007-01-29  Joel Brobecker  <brobecker@adacore.com>
4598
4599         * gdb.texinfo (Maintenance Commands): Add documentation for
4600         the new "maint print target-stack" command.
4601
4602 2007-01-26  Jan Kratochvil <jan.kratochvil@redhat.com>
4603             Eli Zaretskii  <eliz@gnu.org>
4604
4605         * gdb.texinfo: Describe CHAR array vs. string identification rules.
4606
4607 2007-01-26  Eli Zaretskii  <eliz@gnu.org>
4608
4609         * gdb.texinfo (Compilation, Files, Bootstrapping, Bug Reporting):
4610         Use @value{NGCC} instead of @value{GCC}.
4611
4612 2007-01-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
4613
4614         * agentexpr.texi: Fix typos.
4615         * annotate.texinfo: Likewise.
4616         * gdb.texinfo: Likewise.
4617         * gdbint.texinfo: Likewise.
4618         * observer.texi: Likewise.
4619         * stabs.texinfo: Likewise.
4620
4621 2007-01-20  Markus Deuling  <deuling@de.ibm.com>  (tiny change)
4622
4623         * gdbint.texinfo (Support Libraries): Remove mmalloc
4624         entry.  Describe readline library.
4625
4626 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
4627
4628         * gdb.texinfo (Target Descriptions): New section.
4629         (General Query Packets): Add QPassSignals anchor.  Mention
4630         qXfer:features:read under qSupported.  Expand mentions of
4631         qXfer:memory-map:read and QPassSignals.  Document
4632         qXfer:features:read.
4633
4634 2007-01-08  Daniel Jacobowitz  <dan@codesourcery.com>
4635
4636         * gdb.texinfo (Commands to specify files): Describe
4637         "set sysroot" and "show sysroot".
4638         (Using the `gdbserver' program): Lowercase argument
4639         to @var.  Expand description of setting up GDB on the
4640         host.
4641
4642 2007-01-05  Joel Brobecker  <brobecker@adacore.com>
4643
4644         * gdb.texinfo (Set Catchpoints): Add documentation for the new
4645         catch exception, catch exception unhandled, and catch assert
4646         commands.
4647
4648 2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>
4649
4650         * gdb.texinfo (Debugging Output): Document "set debug xml"
4651         and "show debug xml".
4652
4653 2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>
4654
4655         * gdbint.texinfo (Compiler Warnings): Update for -Wall use.
4656
4657 2007-01-01  Joel Brobecker  <brobecker@adacore.com>
4658
4659         * gdbint.texinfo (Start of New Year Procedure): Add missing item.
4660
4661 2006-12-08  Vladimir Prus  <vladimir@codesourcery.com>
4662
4663         * gdb.texinfo (GDB/MI Variable Objects): Wrap historical
4664         note in @ignore, to be removed later if nobody complains.
4665
4666 2006-12-04  Nick Roberts  <nickrob@snap.net.nz>
4667
4668         * gdb.texinfo (GDB/MI Variable Objects): Describe -c option
4669         of -var-delete.
4670
4671 2006-11-22  Vladimir Prus  <vladimir@codesourcery.com>
4672
4673         * gdb.texinfo (Setting breakpoints): Document
4674         automatic software/hardware breakpoint usage and
4675         the "set breakpoint auto-hw" command.
4676
4677 2006-11-21  Vladimir Prus  <vladimir@codesourcery.com>
4678
4679         * gdb.texinfo (Memory Access Checking): New.
4680
4681 2006-11-16  Daniel Jacobowitz  <dan@codesourcery.com>
4682
4683         * gdb.texinfo (Remote configuration): Mention
4684         "pass-signals-packet".
4685         (General Query Packets): Document QPassSignals.  Fix
4686         a typo.
4687
4688 2006-11-14  Maxim Grigoriev  <maxim@tensilica.com>
4689
4690         * gdb.texinfo (Contributors): Add contributors of Xtensa port.
4691
4692 2006-11-14  Daniel Jacobowitz  <dan@codesourcery.com>
4693
4694         * gdb.texinfo (Remote configuration): Rewrite documentation for
4695         packet configuration commands.
4696         (OS Information): Adjust reference to qXfer:auxv:read.
4697         (General Query Packets): Remove references to read-aux-vector-packet
4698         and set remote get-thread-local-storage-address.
4699
4700 2006-11-10  Daniel Jacobowitz  <dan@codesourcery.com>
4701
4702         * gdbint.texinfo (Target Architecture Definition): Add new
4703         Initializing a New Architecture section.
4704
4705 2006-10-31  David Taylor  <dtaylor@emc.com>
4706
4707         * stabs.texinfo (Macro define and undefine): New node describing
4708         stabs for #define and #undef.
4709
4710 2006-10-27  Andreas Schwab  <schwab@suse.de>
4711
4712         * gdb.texinfo (Processes): Rename "detach-fork" to "detach fork".
4713
4714 2006-10-21  Eli Zaretskii  <eliz@gnu.org>
4715
4716         * gdb.texinfo (Breakpoints, Set Watchpoints): Elaborate and
4717         clarify on the possible meanings of ``expression'' watched by
4718         watchpoints.  Add indexing.
4719         (Prompting, Errors, Invalidation, Annotations for Running)
4720         (Source Annotations): Fix index entries by adding "annotation" to
4721         them, to discriminate from index entries that point to the more
4722         general topic descriptions.
4723
4724 2006-10-17  Daniel Jacobowitz  <dan@codesourcery.com>
4725
4726         * gdbint.texinfo (Target Vector Definition): Move most
4727         content into Existing Targets.  Add a menu.
4728         (Existing Targets): New section, moved from Target Vector
4729         Definition.  Use @subsection.
4730         (Managing Execution State): New section.
4731
4732 2006-10-16  Bob Wilson  <bob.wilson@acm.org>
4733
4734         * gdb.texinfo (ST2000): Use Ctrl- instead of C-.
4735
4736 2006-10-15  Eli Zaretskii  <eliz@gnu.org>
4737
4738         * gdb.texinfo (Sample Session, Invocation, Quitting GDB)
4739         (Command Syntax, Signals, Backtrace, Connecting)
4740         (Remote configuration, Renesas Boards, Console I/O): Fix last
4741         change: use Ctrl- instead of C-, except wrt Emacs.
4742         (File-I/O Examples): Put Ctrl-c in @kbd.
4743         (Cygwin Native, File-I/O Overview, The Ctrl-C message)
4744         (Console I/O): Use @samp with Ctrl-.
4745         (Signals, Set Breaks, Set Watchpoints): Document optional
4746         arguments to `info signals'  `handle', `info breakpoints', and
4747         `info watchpoints'.
4748
4749 2006-10-14  Eli Zaretskii  <eliz@gnu.org>
4750
4751         * gdb.texinfo (Backtrace): Fix last change.
4752
4753 2006-10-14  Nick Roberts  <nickrob@snap.net.nz>
4754
4755         * gdb.texinfo (Backtrace): Order correctly and add other cases.
4756
4757 2006-10-10  Bob Wilson  <bob.wilson@acm.org>
4758
4759         * gdb.texinfo (Command Syntax, Connecting, Remote configuration)
4760         (Renesas Boards, ST2000, TUI Keys, TUI Single Key Mode)
4761         (TUI Commands, Emacs, Console I/O): Fix @key and @kbd usage.
4762
4763 2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
4764             Daniel Jacobowitz  <dan@codesourcery.com>
4765
4766         * gdb.texinfo (Packets): Document vFlashErase,
4767         vFlashWrite and vFlashDone packets.
4768         (General Query Packets): Document qXfer:memory-map:read.
4769         Add a new feature for qXfer:memory-map:read.
4770         (Memory map format): New section.
4771         (Target Commands): Mention that gdb can write flash.
4772
4773 2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
4774             Daniel Jacobowitz  <dan@codesourcery.com>
4775
4776         * gdb.texinfo (Memory Region Attributes): Mention target-supplied
4777         memory regions and "mem auto".
4778
4779 2006-09-21  Nathan Sidwell  <nathan@codesourcery.com>
4780
4781         * gdbint.texinfo (Array Containers): New section.
4782
4783 2006-09-17  Vladimir Prus  <vladimir@codesourcery.com>
4784
4785         * gdb.texinfo (GDB/MI Stack Manipulation): Mention that
4786         -stack-list-arguments HIGH_FRAME argument can be larger then the
4787         actual number of frames.
4788
4789 2006-09-07  Vladimir Prus  <vladimir@codesourcery.com>
4790
4791         * gdb.texinfo (GDB/MI Stack Manipulation): Mention that
4792         -stack-list-locals HIGH_FRAME argument can be larger then the
4793         actual number of frames.
4794
4795 2006-09-02  Bob Wilson  <bob.wilson@acm.org>
4796
4797         * gdb.texinfo (Packets, Stop Reply Packets, General Query Packets,
4798         Register Packet Format, Tracepoint Packets): Fix spelling errors.
4799
4800 2006-09-02  Eli Zaretskii  <eliz@gnu.org>
4801
4802         * gdbint.texinfo (Overall Structure): New section "Source Tree
4803         Structure".
4804
4805 2006-08-17  Jim Blandy  <jimb@codesourcery.com>
4806
4807         * gdb.texinfo (Stop Reply Packets): Note similarity of 'S' and 'T'
4808         responses.
4809
4810 2006-08-08  Joel Brobecker  <brobecker@adacore.com>
4811
4812         * gdb.texinfo (Source Path): Add documentation for new
4813         substitute-path commands.
4814
4815 2006-08-08  Daniel Jacobowitz  <dan@codesourcery.com>
4816
4817         * gdb.texinfo (Installing GDB): Update menu.  Move text to...
4818         (Running Configure): ...here.
4819         (Requirements): New node.  Mention expat.
4820
4821 2006-08-08  Vladimir Prus  <vladimir@codesourcery.com>
4822
4823         * gdb.texinfo (Target Commands): Remove
4824         'set download-write-size' and 'show download-write-size'.
4825
4826 2006-08-01  Daniel Jacobowitz  <dan@codesourcery.com>
4827
4828         * stabs.texinfo (Member Type Descriptor): Correct example for
4829         pointer to member types.
4830
4831 2006-07-21  Andrew Stubbs  <andrew.stubbs@st.com>
4832
4833         * gdb.texinfo (Optional warnings and messages): Add
4834         'set/show trace-commands'.
4835         (Command files): Add '-v' to source command.
4836
4837 2006-07-12  Daniel Jacobowitz  <dan@codesourcery.com>
4838
4839         * gdb.texinfo (OS Information): Update qPart reference to
4840         qXfer.
4841         (Remote configuration): Likewise.
4842         (Overview): Move @cindex to the start of a paragraph.  Talk
4843         about binary data encoding.
4844         (Packets): Refer to the overview for the details of the X
4845         packet encoding.
4846         (General Query Packets): Remove qPart description.  Add qXfer
4847         description.  Add an anchor to qSupported.  Correct feature
4848         table title.  Add a new feature for qXfer:auxv:read.
4849         (Interrupts): Add a missing parenthesis.
4850
4851 2006-07-05  Daniel Jacobowitz  <dan@codesourcery.com>
4852
4853         * gdb.texinfo (KOD): Remove node.
4854         (GDB/MI Kod Commands): Remove commented out node.
4855
4856 2006-07-01  Eli Zaretskii  <eliz@gnu.org>
4857
4858         * gdb.texinfo (GDB/MI Output Syntax, GDB/MI Simple Examples)
4859         (GDB/MI Breakpoint Commands, GDB/MI Program Context)
4860         (GDB/MI Thread Commands, GDB/MI Program Execution)
4861         (GDB/MI Stack Manipulation, GDB/MI Variable Objects)
4862         (GDB/MI Data Manipulation, GDB/MI Symbol Query)
4863         (GDB/MI File Commands, GDB/MI Target Manipulation)
4864         (GDB/MI Miscellaneous Commands): Change (@value{GDBP})->(gdb),
4865         since the MI prompt is hard-wired into the code.
4866
4867 2006-07-01  Nick Roberts  <nickrob@snap.net.nz>
4868
4869         * gdb.texinfo (GDB/MI Compatibility with CLI): Qualify more carefully.
4870         (GDB/MI Simple Examples): Use @subheading for "A Bad Command".
4871         (GDB/MI Data Manipulation): Remove description of unimplemented
4872         display related commands as variable objects perform this function
4873         and are superior: -display-delete, -display-disable,
4874         -display-enable, -display-insert and -display-list.  Move
4875         -environment-cd, -environment-directory, -environment-path
4876         and -environment-pwd to "Program Context".
4877         (GDB/MI Program Control): Rename to "Program Execution".  Move
4878         -exec-arguments -exec-abort to...
4879         (GDB/MI Program Context): ...here.  New node split from "Data
4880          Manipulation".
4881
4882 2006-06-21  Daniel Jacobowitz  <dan@codesourcery.com>
4883
4884         * gdb.texinfo (Remote configuration): Document set / show
4885         remote supported-packets.
4886         (General Query Packets): Document qSupported packet.
4887
4888 2006-06-10  Sandra Loosemore <sandra@codesourcery.com>
4889
4890         * gdb.texinfo (File-I/O overview): Copy edit for grammar, spelling,
4891         and font markup.
4892         (Protocol basics): Likewise.
4893         (The F request packet): Likewise.
4894         (The F reply packet): Likewise.
4895         (Memory transfer): Move this node to be a subsubsection of
4896         "Protocol specific representation of datatypes".
4897         (The Ctrl-C message): More copy editing.
4898         (Console I/O): Likewise.
4899         (The isatty call): Delete this node, and merge its content into
4900         the "isatty" node.  Fixed references elsewhere.
4901         (The system call): Delete this node, and merge its content into
4902         the "system" node.  Fixed references elsewhere.
4903         (open): Reformat to use @table, and add appropriate font markup.
4904         (close): Likewise.
4905         (read): Likewise.
4906         (write): Likewise.
4907         (lseek): Likewise.
4908         (rename): Likewise.
4909         (unlink): Likewise.
4910         (stat/fstat): Likewise.
4911         (gettimeofday): Likewise.
4912         (isatty): Likewise.
4913         (system): Likewise, plus minor changes to fix confusing wording.
4914         (Integral datatypes): Fix font markup.
4915         (Pointer values): Likewise.
4916         (struct stat): Fix markup to use @table, plus minor copy editing.
4917         (struct timeval): Fix font markup, plus minor copy editing.
4918         (Constants): Minor copy editing.
4919         (Errno values): Add font markup.
4920         (File-I/O Examples): Likewise.
4921
4922 2006-06-10  Nick Roberts  <nickrob@snap.net.nz>
4923
4924         * gdb.texinfo (GDB/MI): Remove duplicate acknowledgements.
4925         (GDB/MI Simple Examples): Move node up one level.  Use real
4926         examples.
4927         (GDB/MI Compatibility with CLI): Update.
4928         (GDB/MI Result Records): Add "connected" and "exit" result
4929         classes.
4930         (GDB/MI Stream Records): Clarify target output.
4931         (GDB/MI Command Description Format): Modify example description.
4932         (GDB/MI Breakpoint Table Commands): Rename to...
4933         (GDB/MI Breakpoint Commands): ...this
4934         (GDB/MI Breakpoint Commands): Add optional thread field.
4935         (GDB/MI Program Control): Add an introduction.  Move "Program
4936         termination" examples into exec-run description.
4937         (GDB/MI File Commands): Mention similar CLI commands.
4938         (GDB/MI Miscellaneous Commands): Move to end.  Mention "show version"
4939         is similar to "-gdb-version".
4940
4941 2006-06-09  Eli Zaretskii  <eliz@gnu.org>
4942
4943         * gdb.texinfo (Symbols): Fix "(gdb)"=>"(@value{GDBP})".
4944
4945 2006-06-02  Nick Roberts  <nickrob@snap.net.nz>
4946
4947         * gdb.texinfo (GDB/MI Development and Front Ends): Use
4948         sourceware.org for mailing lists.
4949         (GDB/MI File Commands): New node split from Program Control.
4950
4951 2006-06-01  Nick Roberts  <nickrob@snap.net.nz>
4952
4953         * gdb.texinfo (GDB/MI Development and Front Ends): New node.
4954
4955 2006-05-22  Eli Zaretskii  <eliz@gnu.org>
4956
4957         * gdb.texinfo (Cygwin Native): Fix last change.
4958
4959 2006-05-22  Christopher Faylor  <cgf@timesys.com>
4960
4961         * gdb.texinfo (Cygwin Native): Document set/show cygwin-exceptions.
4962
4963 2006-05-15  Nick Roberts  <nickrob@snap.net.nz>
4964
4965         * gdbint.texinfo (Algorithms): Correct spelling and punctuation.
4966         (Releasing GDB, Testsuite): Remove details for including DejaGnu.
4967
4968 2006-05-14  Daniel Jacobowitz  <dan@codesourcery.com>
4969
4970         * gdb.texinfo (General Query Packets): Recommend not starting
4971         new packets with qC and clarify.
4972
4973 2006-05-13  Gaius Mulley  <gaius@glam.ac.uk>
4974
4975         * gdb.texinfo (M2 Types): New section.
4976
4977 2006-05-10  Daniel Jacobowitz  <dan@codesourcery.com>
4978
4979         * agentexpr.texi: Add a copyright and license notice.
4980         * observer.texi: Likewise, with GPL clause for function prototypes.
4981         Remove trailing whitespace.
4982
4983 2006-05-05  Jim Blandy  <jimb@codesourcery.com>
4984
4985         * gdb.texinfo (General Query Packets): Document conventions for
4986         terminating packet names, and their violations.
4987
4988 2006-05-05  Daniel Jacobowitz  <dan@codesourcery.com>
4989
4990         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Update for readline 5.1.
4991         * gdb.texinfo: Likewise.
4992
4993 2006-05-05  Daniel Jacobowitz  <dan@codesourcery.com>
4994
4995         * gdb.texinfo (Remote Configuration): Remove "set remotedebug"
4996         and "show remotedebug".
4997         (Debugging Output): Add additional index entries.
4998
4999 2006-04-27  Michael Snyder  <msnyder@redhat.com>
5000
5001         * gdb.texinfo (delete-fork): Command renamed to "delete fork".
5002
5003 2006-04-22  Andrew Cagney  <cagney@redhat.com>
5004
5005         * gdb.texinfo (Contributors): Credit frame unwinder contributors.
5006         * gdbint.texinfo (Algorithms): Fix errors in frame documentation.
5007
5008 2006-04-18  Daniel Jacobowitz  <dan@codesourcery.com>
5009
5010         * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
5011         and remove breakpoint prototypes.
5012         (Watchpoints): Move description of target_insert_hw_breakpoint and
5013         target_remove_hw_breakpoint ...
5014         (Breakpoints): ... to here.  Document target_insert_breakpoint and
5015         target_remove_breakpoint.
5016
5017 2006-04-17  Jim Blandy  <jimb@codesourcery.com>
5018
5019         * gdb.texinfo (Packets): Note that 'addr' arguments to s, S, c,
5020         and C packets are optional.
5021
5022 2006-04-14  Frederic Riss  <frederic.riss@st.com>
5023
5024         * gdb.texinfo (Specifying source directories): Update the description
5025         of the source file search to reflect the fact that the source path
5026         always contains at least $cdir and $cwd.
5027
5028 2006-03-31  Michael Snyder  <msnyder@redhat.com>
5029
5030         * gdb.texinfo: Update copyright dates.
5031
5032 2006-03-31  Eli Zaretskii  <eliz@gnu.org>
5033
5034         * gdb.texinfo (Overview): Add an index entry to "empty response".
5035
5036 2006-03-28  Jim Blandy  <jimb@codesourcery.com>
5037
5038         * gdbint.texinfo (Prologue Analysis): New section.
5039
5040 2006-03-07  Jim Blandy  <jimb@red-bean.com>
5041
5042         * gdb.texinfo (Connecting): Document 'target remote pipe'.
5043
5044         * gdb.texinfo (Target Commands): Update text describing how to
5045         specify a target.  Refer to the detailed section on remote
5046         debugging, not the brief mention.
5047
5048         * gdb.texinfo (Connecting): Organize the different 'target remote'
5049         connection methods into a table.  Add a 'target remote' index
5050         entry. (!!!)
5051
5052 2006-02-17  Fred Fish  <fnf@specifix.com>
5053
5054         * gdb.texinfo (Symbols): Update descriptions of 'whatis' and
5055         'ptype' commands to reflect the fact that the only significant
5056         difference between them is that ptype prints the complete type
5057         description instead of just the name.
5058
5059 2006-02-13  Wu Zhou  <woodzltc@cn.ibm.com>
5060
5061         * gdbint.texinfo (Watchpoints): Delete
5062         TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.
5063
5064 2006-02-10  Nick Roberts  <nickrob@snap.net.nz>
5065
5066         * gdb.texinfo (GDB/MI Breakpoint Table Commands): Add fullname and
5067         times fields where needed.  Fix typos.  Update general form given
5068         for output of -break-insert.
5069         (GDB/MI): Abbreviate some unnecessarily long fullnames.
5070
5071 2006-02-06  Daniel Jacobowitz  <dan@codesourcery.com>
5072
5073         * gdbint.texinfo (Symbol Handling): Add a section
5074         on memory management.
5075
5076 2006-02-06  Vladimir Prus  <ghost@cs.msu.su>
5077
5078         * gdb.texinfo (Breakpoint table commands): Document the fullname
5079         field in -break-list output.
5080
5081 2006-02-03  Eli Zaretskii  <eliz@gnu.org>
5082
5083         * gdb.texinfo (Cygwin Native): Fix typos.  Clarify the types of
5084         debugging information produced by the various "set debug..."
5085         options.
5086
5087 2006-02-01  Daniel Jacobowitz  <dan@codesourcery.com>
5088
5089         * gdb.texinfo (Files): Remove obsolete bits from the description
5090         of "symbol-file".
5091
5092 2006-01-25  Jim Blandy  <jimb@redhat.com>
5093
5094         * gdbint.texinfo (Testsuite): Explain how to run selected tests.
5095
5096 2006-01-24  Jim Blandy  <jimb@redhat.com>
5097
5098         * gdbint.texinfo (Frames): Document the basics of GDB's register
5099         unwinding model, and explain the existence of the "sentinel" frame.
5100
5101 2006-01-23  Andrew Stubbs  <andrew.stubbs@st.com>
5102
5103         * gdb.texinfo (Choosing files): Mention that -directory is used
5104         for script files.
5105         (Specifying source directories): Likewise.
5106         (Command files): Explain how script files are found.
5107
5108 2006-01-21  Eli Zaretskii  <eliz@gnu.org>
5109
5110         * gdb.texinfo (Backtrace): Describe how to get backtrace of all
5111         the threads in a multi-threaded program.
5112         (Threads): The threadno argument of "thread apply" can be a range
5113         of numbers.
5114
5115 2006-01-18  Jim Blandy  <jimb@redhat.com>
5116
5117         * gdbint.texinfo (Coding): Add entry for -Wno-pointer-sign to list
5118         of warning flags.
5119
5120 2006-01-13  Eli Zaretskii  <eliz@gnu.org>
5121
5122         * gdb.texinfo (Sequences): Improve menu annotations.
5123         (Define): Add index entries for arguments of user-defined
5124         commands.  Move the description of flow-control commands...
5125         (Command Files): ...to here.  Document loop_break and
5126         loop_continue.
5127         (Define, Command Files): Document `end' and add index entries for
5128         it.
5129
5130 2006-01-04  Michael Snyder  <msnyder@redhat.com>
5131
5132         * gdb.texinfo: Add documentation for linux-fork.
5133         * gdbint.texinfo: Add internal documentation for checkpoints.
5134
5135 2006-01-02  Paul N. Hilfinger  <hilfinger@gnat.com>
5136
5137         * gdb.texinfo (Omissions from Ada): Document that there is now
5138         limited aggregate support.
5139
5140 2005-12-28  Eli Zaretskii  <eliz@gnu.org>
5141
5142         * gdb.texinfo (Registers): Describe how to refer to SSE and MMX
5143         registers and the likes.
5144
5145 2005-12-24  Eli Zaretskii  <eliz@gnu.org>
5146
5147         * gdb.texinfo (Target Commands, Bug Reporting, File Options)
5148         (Symbols): Fix usage of "e.g.".
5149         (Memory Region Attributes): Fix usage of "etc."
5150
5151         * gdbint.texinfo (libgdb, Symbol Handling, Native Debugging)
5152         (Coding): Fix usage of "e.g.".
5153
5154 2005-12-23  Eli Zaretskii  <eliz@gnu.org>
5155
5156         * stabs.texinfo:
5157         * refcard.tex:
5158         * gpl.texi:
5159         * gdbint.texinfo:
5160         * gdb.texinfo:
5161         * gdb-cfg.texi:
5162         * fdl.texi:
5163         * annotate.texinfo:
5164         * all-cfg.texi:
5165         * Makefile.in: Add (C) after Copyright.  Update the FSF
5166         address.
5167
5168 2005-12-03  Eli Zaretskii  <eliz@gnu.org>
5169
5170         * gdb.texinfo (Connecting): Explain that `monitor' is a way to
5171         extend GDB with commands for external monitor.
5172
5173 2005-12-02  Andrew Stubbs  <andrew.stubbs@st.com>
5174
5175         * gdb.texinfo (Convenience variables): Add init-if-undefined command.
5176
5177 2005-11-25  Joel Brobecker  <brobecker@adacore.com>
5178
5179         * gdbint.texinfo (Start of New Year Procedure): New chapter.
5180
5181 2005-11-21  Jim Blandy  <jimb@redhat.com>
5182
5183         * gdb.texinfo (Tracepoint Packets): Document restrictions on
5184         placement of 'R' actions in tracepoint action packets; document
5185         dependence of 'X' and 'M' actions on a preceding 'R' action for
5186         their registers.
5187
5188 2005-11-19  Jim Blandy  <jimb@redhat.com>
5189
5190         * gdb.texinfo (Tracepoint Packets): New node.
5191         (General Query Packets): Add entries for the tracepoint packets,
5192         referring to the "Tracepoint Packets" node.
5193         (Tracepoints): Add reference to "Tracepoint Packets".
5194
5195 2005-11-18  Kevin Buettner  <kevinb@redhat.com>
5196
5197         * gdb.texinfo (set remotebreak): Add anchor.
5198         (X packet): Likewise.
5199         (Remote Protocol): Add new section `Interrupts' and new index
5200         entry `interrupts (remote protocol)'.
5201
5202 2005-11-18  Jim Blandy  <jimb@redhat.com>
5203
5204         * gdb.texinfo (Packets): Move information out of 'q' and 'Q'
5205         entries into the General Query Packets section.  Add a
5206         cross-reference to that section.  Drop description of replies, as
5207         these are covered in the descriptions of each packet.
5208         (General Query Packets): Add introductory text.  Explain naming
5209         conventions, and how the end of a name is recognized.
5210
5211 2005-11-17  Kevin Buettner  <kevinb@redhat.com>
5212
5213         * gdb.texinfo (Remote configuration): Fix typo in description of
5214         "set remotebreak" command.
5215
5216 2005-11-16  Jim Blandy  <jimb@redhat.com>
5217
5218         * gdb.texinfo (Packets, Stop Reply Packets)
5219         (General Query Packets): Various formatting cleanups.
5220         - Use @samp for packet contents.
5221         - Drop summaries from packet @item lines; the same information appears
5222           immediately below in the description.
5223         - Delete paragraph breaks after packet @item commands, so that the
5224           description appears directly to the right of the packet prototype
5225           in the printed manual, if it fits.
5226         - Place spaces in packet prototypes between @vars and non-@var
5227           letters, and explain that they're just for formatting.
5228         - Use @dots{} instead of '...'.
5229         - Fix uses of @code where @var was needed.
5230         - Replace "deprecated" markers with English text spelling out the
5231           packet's status and the preferred alternatives.
5232         - Remove "(reserved)" markers on 'A' and 'I' packets; it's unclear
5233           what this ever meant.
5234         - Remove "(draft)" markers on 'i' packets; nobody has commented on
5235           this for a long time.
5236         - Remove "(draft)" markers on 'z' and 'Z' packets; these have been
5237           implemented several times, and have been in use for years.
5238
5239 2005-11-15  Jim Blandy  <jimb@redhat.com>
5240
5241         * gdb.texinfo (Packets): Add index entries for 'm' packet
5242         disclaimers.
5243
5244         * gdb.texinfo (Packets): Clarify lack of restrictions on behavior
5245         of stub when processing an 'm' packet.
5246
5247         * gdb.texinfo (Packets): Mention that packets beginning with
5248         letters are reserved once, at the top, instead of actually listing
5249         them all and saying "reserved".
5250
5251 2005-11-15  Andrew Stubbs  <andrew.stubbs@st.com>
5252
5253         * gdb.texinfo (User-defined commands): Add $argc. Add missing 'end'.
5254         Change @var{$arg0 to @code{$arg0.
5255
5256 2005-11-14  Wu Zhou  <woodzltc@cn.ibm.com>
5257
5258         * gdb.texinfo (Fortran): Add some words about Fortran debugging.
5259
5260 2005-11-12  Jim Blandy  <jimb@redhat.com>
5261
5262         * gdb.texinfo (General Query Packets): Put packets in alphabetical
5263         order.  Remove extraneous 'z'.
5264
5265 2005-11-07  Andrew Stubbs  <andrew.stubbs@st.com>
5266
5267         * gdb.texinfo (Choosing files): Add --eval-command.
5268
5269 2005-11-04  Andrew Stubbs  <andrew.stubbs@st.com>
5270
5271         * gdb.texinfo (Choosing modes): Add --return-child-result.
5272
5273
5274 2005-11-01  Andrew Stubbs  <andrew.stubbs@st.com>
5275
5276         * gdb.texinfo (Choosing modes): Add --batch-silent.
5277
5278 2005-10-28  Eli Zaretskii  <eliz@gnu.org>
5279
5280         * gdb.texinfo (GDB/MI Variable Objects): Fix @pxref usage under
5281         "The -var-update Command".
5282
5283 2005-10-03  Joel Brobecker  <brobecker@adacore.com>
5284
5285         * gdb.texinfo (Print Settings): Add documentation for set/show
5286         print array-indexes.
5287
5288 2005-09-17  Daniel Jacobowitz  <dan@codesourcery.com>
5289
5290         * gdb.texinfo (Contributors): Thank Andrew Cagney for releases
5291         6.2 and 6.3.
5292
5293 2005-08-27  Eli Zaretskii  <eliz@gnu.org>
5294
5295         * gdb.texinfo (File Options): Don't document --mapped, it's gone
5296         since 19-Jan-2004.
5297         (Files): Likewise.
5298         (Variables, Symbols): Document the "<incomplete type>" message and
5299         its reasons.
5300
5301 2005-08-01  Fred Fish  <fnf@specifix.com>
5302
5303         * gdb.texinfo (SETUP_ARBITRARY_FRAME): Remove obsolete reference.
5304
5305 2005-07-15  Nick Roberts  <nickrob@snap.net.nz>
5306
5307         * gdb.texinfo (GDB/MI Variable Objects): Describe print-values
5308         option for -var-list-children and -var-update.
5309         (GDB/MI Stack Manipulation): Simplify description of
5310         print-values option for -stack-list-locals.
5311         (GDB/MI Command Description Format): Clarify.
5312         (Mode Options): Spelling of superseded.
5313
5314 2005-07-12  Bob Rossi  <bob@brasko.net>
5315
5316         * gdb.texinfo (GDB/MI Miscellaneous Commands): Fix -inferior-tty-show
5317         corresponding GDB command comment.
5318
5319 2005-07-06  Bob Rossi  <bob@brasko.net>
5320
5321         * gdb.texinfo (GDB/MI Miscellaneous Commands): Add -inferior-tty-set
5322         and -inferior-tty-show.
5323         (Input/Output): Document "set/show inferior-tty" and tty alias.
5324
5325 2005-07-02  Nathan J. Williams  <nathanw@wasabisystems.com>
5326
5327         * gdb.texinfo (Packets): Change description of 'D' packet to note
5328         that GDB does wait for a response.
5329
5330 2005-06-22  Nick Roberts  <nickrob@snap.net.nz>
5331
5332         * gdb.texinfo (History) Rename "Command History".
5333         (Command History): Move node "Server Prefix" from section on
5334         Annotations here.
5335
5336 2005-06-19  Nick Roberts  <nickrob@snap.net.nz>
5337
5338         * gdb.texinfo (GDB/MI Stack Manipulation):
5339         Re-instate -stack-info-frame with example.  Say that it gets
5340         info on selected frame, not current frame.
5341
5342 2005-06-18  Eli Zaretskii  <eliz@gnu.org>
5343
5344         * gdb.texinfo (Server): Clarify that `file' should be used before
5345         connecting to the server.
5346         (Files): Add an xref to the above description.
5347         (Output Formats): More detailed description of the `c' format.
5348         (Memory): List explicitly all the formats supported by `x'.
5349         (Threads): Add an @cindex entry for "thread apply".
5350         (Files): Document the possibility of loading unlinked object
5351         files.  Add more indexing for solib-absolute-prefix and
5352         --with-sysroot.
5353         (Machine Code): Document possible problems with locations in
5354         shared libraries.
5355         (Backtrace): Document that free-standing environments do not need
5356         to have a `main' function.
5357
5358 2005-06-18  Nick Roberts  <nickrob@snap.net.nz>
5359
5360         * gdb.texinfo (GDB/MI Stack Manipulation): Remove reference to
5361         -stack-info-frame.
5362
5363 2005-06-07  Andrew Cagney  <cagney@gnu.org>
5364
5365         * gdb.texinfo (Contributors): Note the original multi-arch
5366         contributors.
5367
5368 2005-06-03  Eli Zaretskii  <eliz@gnu.org>
5369
5370         * gdb.texinfo (Registers): Add index entries for the standard
5371         registers.
5372         (Frames): Add cross-reference from frame pointer description to
5373         the Registers node.
5374         (Annotations Overview): Fix the reference to GDB name.
5375
5376 2005-06-01  Eli Zaretskii  <eliz@gnu.org>
5377
5378         * gdb.texinfo (Set Watchpoints): Remove @vindex entry for
5379         can-use-hw-watchpoints.
5380
5381 2005-05-28  Bob Rossi  <bob@brasko.net>
5382
5383         * gdb.texinfo (GDB/MI Out-of-band Records): Add bullet enumerating
5384         the possible reasons why an exec async record would be returned to FE.
5385
5386 2005-05-26  Andrew Cagney  <cagney@gnu.org>
5387
5388         * gdb.texinfo: Note that Elena Zannoni, Fernando Nasser, and
5389         Andrew Cagney implemented the original GDB/MI.
5390
5391 2005-05-23  Orjan Friberg  <orjanf@axis.com>
5392
5393         * gdb.texinfo (CRIS): Update the cris-version and cris-dwarf2-cfi
5394         documentation.  Add documentation for cris-mode.
5395
5396 2005-05-20  Eli Zaretskii  <eliz@gnu.org>
5397
5398         * gdb.texinfo (Numbers): Explain the example and make the wording
5399         more acurate.
5400
5401 2005-05-17  Daniel Jacobowitz  <dan@codesourcery.com>
5402             Dennis Brueni  <dennis@slickedit.com>
5403
5404         * gdb.texinfo (GDB/MI Breakpoint Table Commands)
5405         (GDB/MI Data Manipulation, GDB/MI Program Control)
5406         (GDB/MI Stack Manipulation): Update examples to include the fullname
5407         attribute in stack frames.
5408
5409 2005-05-12  Eli Zaretskii  <eliz@gnu.org>
5410
5411         * gdb.texinfo (Startup): Fix last change.  Treat gdb.ini like we
5412         do with other non-standard names of init files.
5413
5414 2005-05-11  Eli Zaretskii  <eliz@gnu.org>
5415
5416         * gdb.texinfo (Command Files): Move the description of the startup
5417         from here...
5418         (Startup): ...to this new subsection of the Invocation chapter.
5419         Rearrange the description of init files more logically and add a
5420         cross-reference to "Command Files".  Document the special gdbinit
5421         name for CISCO 68k.  Expand the description of what GDB does
5422         during startup.
5423         (History): Add index entry for HISTSIZE.
5424
5425 2005-05-02  Mark Kettenis  <kettenis@gnu.org>
5426
5427         * gdb.texinfo (Files): Remove documentation for auto-solib-limit.
5428
5429 2005-05-02  Eli Zaretskii  <eliz@gnu.org>
5430
5431         * gdb.texinfo (SVR4 Process Information, The isatty call)
5432         (The system call): Don't use foo(N) notation for man pages and
5433         functions.
5434         (Compilation, DJGPP Native): Improve wording.
5435
5436 2005-04-27  Eli Zaretskii  <eliz@gnu.org>
5437
5438         * gdb.texinfo (Backtrace): Describe backtraces with arguments that
5439         were optimized away.
5440
5441 2005-04-22  Eli Zaretskii  <eliz@gnu.org>
5442
5443         * gdb.texinfo (Remote configuration): Document "set/show
5444         get-thread-local-storage-address".  Add cross-reference to the
5445         description of the qGetTLSAddr packet.
5446         (General Query Packets): Mention "set remote
5447         get-thread-local-storage-address" and add a reference to its
5448         description.
5449
5450 2005-04-19  Nick Roberts  <nickrob@snap.net.nz>
5451
5452         * gdb.texinfo (Backtrace): Describe 'bt full'.
5453
5454 2005-04-17  Nick Roberts  <nickrob@snap.net.nz>
5455
5456         * gdb.texinfo (Mode Options): Fix typo.
5457         (GDB/MI): Describe how to invoke GDB/MI.
5458
5459 2005-04-16  Eli Zaretskii  <eliz@gnu.org>
5460
5461         * gdb.texinfo (OS Information): Renamed from Auxiliary Vector; all
5462         references changed.  Add description of "info udot".
5463         (Files): Document "set/show stop-on-solib-events".
5464         (M32R/D): Document "set/show download-path", "set/show
5465         board-address", "set/show server-address", "upload", "tload".
5466         Document "sdireset", "sdistatus", "debug_chaos", "use_debug_dma",
5467         "use_mon_code", "use_ib_break", "use_dbt_break".
5468         (Maintenance Commands): Improve indexing.
5469         (Target Commands): Document "set/show hash", "set/show debug
5470         monitor".
5471         (SVR4 Process Information): Document "info pidlist" and "info
5472         meminfo".  Document "set/show procfs-tarce" and "set/show
5473         procfs-file".  Document "proc-trace-*" and "proc-untrace-*".
5474         (Symbols, The Print Command with Objective-C): Improve indexing.
5475         (Objective-C): Add references to "info classes" and "info
5476         selectors".
5477         (Debugging Output): Improve wording.  Document "set/show debug
5478         solib-frv".  Fix "set/show debugvarobj".
5479         (Set Breaks): Add index entry for "hardware breakpoints".
5480         (Renesas ICE): Document "e7000", "ftplogin", "ftpload", "drain",
5481         and "set/show usehardbreakpoints".
5482         (MIPS Embedded): Document "se/show syn-garbage-limit", "set/show
5483         monitor-prompt", "set/show monitor-warnings", "pmon".
5484         (ARM): Document "rdilogfile", "rdilogenable", "set/show
5485         rdiromatzero", "set/show rdiheartbeat".
5486         (PowerPC): Document SDS-specific commands "set/show sdstimeout",
5487         "sds".
5488         (Embedded Processors): Document the "sim" command.
5489         (Remote): Document the "remote" command.
5490         (DJGPP Native): Document the "info serial" command.
5491         (Threads): Document "maint info sol-threads".
5492         (Files): Document "nosharedlibrary", "add-symbol-file-from-memory".
5493         (Set Breaks): Improve indexing.
5494         (Command Syntax): Add a reference to dont-repeat.
5495         (Define): Document "dont-repeat".
5496         (TUI Commands): Document "tabset".
5497         (WinCE): New subsection.  Document "set/show remotedirectory",
5498         "set/show remoteupload", "set/show remoteaddhost".
5499
5500 2005-04-15  Eli Zaretskii  <eliz@gnu.org>
5501
5502         * gdb.texinfo (Hurd Native): New subsection, documents
5503         Hurd-specific commands.
5504         (Maintenance Commands): Add cross-reference to "Debugging Output".
5505         (Debugging Output): Document "set/show debug lin-lwp".
5506         (MIPS): Improve documentation of heuristic-fence-post.  Document
5507         "set/show mips abi", "set/show mips saved-gpreg-size", "set/show
5508         mips stack-arg-size", "set/show mips mask-address", "set/show mips
5509         remote-mips64-transfers-32bit-regs", "set/show debug mips".
5510         (ARM): Document ARM-specific commands.
5511         (AVR): New section.  Document "info io_registers".
5512         (CRIS): New section.  Document "set/show cris-version" and
5513         "set/show cris-dwarf2-cfi".
5514         (HPPA): New section.  Document "set/show debug hppa" and "maint
5515         print unwind".
5516         (Neutrino): New subsection.  Document "set/show debug nto-debug".
5517         (Super-H): New section.  Document the "regs" command.
5518         (Debugging Output): Document "set/show debug aix-thread".
5519
5520 2005-04-09  Eli Zaretskii  <eliz@gnu.org>
5521
5522         * gdb.texinfo (Print Settings): Document "set/show print
5523         pascal_static-members", "set print repeats", "show print
5524         null-stop".  Improve indexing.  Fix documentation of "set print
5525         union".
5526         (Pascal): New section.
5527         (Supported languages): Rename from "Support"; all references
5528         updated.  Add a menu item for Pascal.
5529         (Numbers): Document "set radix.
5530         (Screen Size): Document "set/show pagination".
5531         (MIPS Embedded): Remove "set processor" documentation.
5532         (Remote configuration): Document "set/show X/P/Z-packet",
5533         "set/show read-aux-vector-packet", "set/show remote
5534         symbol-lookup-packet", "set/show remote verbose-resume-packet",
5535         "set/show remoteaddresssize", "set/show remotebaud", "set/show
5536         remotedebug", "set/show remotebreak", "set/show remotedevice",
5537         "set/show remotelogfile".
5538         (Auxiliary Vector): Add reference to the description of the
5539         read-aux-vector-packet setting.
5540         (Set Watchpoints): Add a cross-reference to "set remote
5541         hardware-breakpoint-limit".
5542         (General Query Packets): Add indexing of requests and
5543         cross-references to related commands in "Remote configuration".
5544         (File-I/O Overview, The system call): Fix wording and typos.
5545         (Thread Stops): Add index entries.
5546         (Continuing and Stepping): Document "show step-mode".
5547         (i386): New node.  Document "set/show struct-convention".
5548         (Files): Document "show trust-readonly-sections".
5549         (Calling): Document "set/show unwindonsignal".
5550         (Messages/Warnings): Add index entries.
5551         (Maintenance Commands): Document "set/show watchdog".
5552         (Annotations Overview): Document "show annotate".
5553         (Set Watchpoints): Add index entries.
5554         (Symbols): Fix doc of case-sensitive.
5555         (ABI): Document "show coerce-float-to-double".
5556         (Convenience Vars, Help): Improve indexing.
5557         (Machine Code): Document "show disassembly-flavor".
5558         (Debugging C plus plus): Document "show overload-resolution".
5559         (Value History, Signaling): Add index entries.
5560
5561 2005-04-08  Eli Zaretskii  <eliz@gnu.org>
5562
5563         * gdb.texinfo (Show): Move @kindex entries to their proper places.
5564         (Processes): Fix wording.
5565         (History, List, Logging output, Define, Symbols, Print Settings):
5566         Improve indexing.
5567
5568 2005-04-03  Eli Zaretskii  <eliz@gnu.org>
5569
5570         * gdb.texinfo (Targets): Document "set/show architecture".  Remove
5571         redundant index entry for "target" command.
5572         (Backtrace): Add index entries.
5573         (Symbols, Fortran): Document the "set case-sensitive" command.
5574         (DJGPP Native): Document "set com1base", "set com1irq", etc.
5575         (Print Settings): Add index entry for "set demangle-style".
5576         (Target Commands): Document "set download-write-size".
5577         (Debugging Output): Document "set exec-done-display".
5578
5579 2005-04-02  Eli Zaretskii  <eliz@gnu.org>
5580
5581         * gdb.texinfo (Files): Fix the name and documentation of
5582         add-shared-symbol-files.  Document its alias assf.  Update the
5583         list of OSs where GDB supports shared libraries.  Fix markup.
5584         (Continuing and Stepping): Add reference to @var{location} in the
5585         text.
5586         (Dump/Restore Files): Fix reference to @{filename}.
5587         (Help): Fix wording.
5588         (Attach): Ditto.
5589         (Set Watchpoints): Ditto.
5590         (Backtrace): Remove redundant index entries.  Improve index
5591         entries.
5592         (Delete Breaks): Fix wording.
5593         (Memory): Document the compare-sections command.
5594         (Memory Region Attributes): Improve wording.
5595         (Disabling): Improve wording.
5596         (Fortran): New subsection.  Document the "info common" command.
5597         (Help): Document aliases "info copying" and "info warranty".
5598         (Caching Remote Data): New section.  Document the "set/show
5599         remotecache" and "info dcache" commands.
5600         (Show): Fix wording of the documentation of the "set
5601         extension-language" command.
5602         (Signals): Add index entry for "info handle".
5603         (Memory Region Attributes): Fix punctuation.
5604         (Symbols): Change the arg name to "location" and refer to it in
5605         the text.  Fix wording of "info types" doc.
5606         (Threads): Fix usage of @enumerate @item's.
5607         (Listing Tracepoints): Add index entry for "info tp".
5608         (Set Watchpoints): Add xref to "info break" description.
5609         (Macros): Add an index entry for "macro exp1".  Document the
5610         "macro list" command.
5611         (Maintenance Commands): Document "flushregs", "maint agent",
5612         "maint check-symtabs", "maint cplus", "maint demangle", "maint
5613         deprecate", "maint undeprecate", "maint dump-me", "maint packet",
5614         "maint print architecture", "maint print objfiles", "maint print
5615         statistics", "maint print type", "maint show-debug-regs", "maint
5616         space", "maint time", and "maint translate-address".
5617         (Connecting): Document the "monitor" command.
5618         (Annotations Overview): Describe the "set annotate" command.
5619
5620 2005-04-01  Eli Zaretskii  <eliz@gnu.org>
5621
5622         * gdb.texinfo (Set Watchpoints): Document can-use-hw-watchpoints.
5623         Rearrange index entries and improve wording about support for
5624         hardware watchpoints.
5625
5626 2005-03-10  Bob Rossi  <bob@brasko.net>
5627
5628         * gdb.texinfo: Update copyright
5629
5630 2005-02-09  Theodore A. Roth  <troth@openavr.org>
5631
5632         * gdb.texinfo (General Query Packets): Fix texinfo compile warning and
5633         error.
5634
5635 2005-02-03  Kevin Buettner  <kevinb@redhat.com>
5636
5637         * gdb.texinfo (General Query Packets): Document qGetTLSAddr packet.
5638
5639 2005-01-17  Michael Snyder  <msnyder@redhat.com>
5640
5641         * gdb.texinfo: Fix spelling, infinte  ->  infinite.
5642
5643 2005-01-08  Mark Kettenis  <kettenis@gnu.org>
5644
5645         * observer.texi (GDB Observers): Document "solib_loaded".
5646
5647 2005-01-07  Andrew Cagney  <cagney@gnu.org>
5648
5649         * configure.ac: Rename configure.in, require autoconf 2.59.
5650         * configure: Re-generate.
5651
5652         * configure.in: Replace configdirs with multiple references to
5653         AC_CONFIG_SUBDIRS.
5654         * configure: Re-generate.
5655
5656 2005-01-04  Andrew Cagney  <cagney@gnu.org>
5657
5658         * gdbint.texinfo (Versions and Branches): Make the date (YYYYMMDD)
5659         part of the version number.
5660
5661 2004-12-24  Mark Kettenis  <kettenis@gnu.org>
5662
5663         * gdbint.texinfo (Algorithms): Remove description of
5664         TARGET_DISABLE_HW_WATCHPOINTS and TARGET_ENABLE_HW_WATCHPOINTS.
5665
5666 2004-12-07  Jim Blandy  <jimb@redhat.com>
5667
5668         * gdb.texinfo (General Query Packets): Specify that thread ID's in
5669         the 'qC' and 'qThreadInfo' packets are unsigned hexidecimal
5670         numbers.
5671
5672 2004-12-07  Andreas Schwab  <schwab@suse.de>
5673
5674         * gdb.texinfo (Mode Options): Document -l option.
5675
5676 2004-12-04  Eli Zaretskii  <eliz@gnu.org>
5677
5678         * gdbint.texinfo (Algorithms): More accurate description of
5679         STOPPED_BY_WATCHPOINT.  Point out that target_stopped_data_address
5680         is not needed unless data-read and data-access watchpoints are
5681         supported.  Add a description of how GDB checks whether the
5682         inferior stopped because a watchpoint was hit.
5683
5684 2004-11-23  Eli Zaretskii  <eliz@gnu.org>
5685
5686         * gdb.texinfo (Files): Add cross-reference to description of
5687         -readnow command-line switch.
5688
5689 2004-11-10  Randolph Chung  <tausq@debian.org>
5690
5691         * gdb.texinfo: Document set/show backtrace past-entry commands.
5692         Rearrange index entries for set/show backtrace past-main.
5693
5694 2004-11-10  Jon Beniston <jon@beniston.com>
5695
5696         Committed by Andrew Cagney  <cagney@gnu.org>.
5697         * gdb.texinfo (Remote Serial Protocol): Further describe
5698         binary transfer escaping mechanism .
5699
5700 2004-11-08  Randolph Chung  <tausq@debian.org>
5701
5702         * gdb.texinfo (inferior_debugging info): Document "set debug infrun"
5703         and "show debug infrun".  Add index entries.
5704
5705 2004-10-23  Eli Zaretskii  <eliz@gnu.org>
5706
5707         * gdb.texinfo (SVR4 Process Information): Document subcommands of
5708         "info proc" that are already implemented.  Add index entries.
5709         (Working Directory): Add a cross-reference to "info proc" command.
5710         (Files): Add a tip for decreasing memory used for symtabs from
5711         shared libraries.
5712         (Starting): Fix whitespace; make "elaboration" stand out where it
5713         is first used, and add an index entry for the term.
5714         (Calling): Expand and elaborate text.  Add "print".  Add the
5715         description of problems with weak aliases.
5716         (Core File Generation): New section.
5717
5718 2004-10-12  Andrew Cagney  <cagney@gnu.org>
5719
5720         * gdbint.texinfo (Versions and Branches): New chapter.
5721         (Releasing GDB): Delete "Versions and Branches" section.
5722         (Top): Add "Versions and Branches".
5723
5724 2004-10-08  Eli Zaretskii  <eliz@gnu.org>
5725
5726         * gdb.texinfo (Editing, History): Add cross-references to the
5727         included Readline and History user documentation.  Remove
5728         references to the symbol have-readline-appendices which is unused
5729         and undefined.
5730         (History): Fix indexing.
5731
5732 2004-10-08  Jeff Johnston  <jjohnstn@redhat.com>
5733
5734         * gdbint.texinfo (target_stopped_data_address): Update to
5735         new prototype.
5736         (i386_stopped_data_address): Update prototype and description.
5737         (i386_stopped_by_watchpoint): New function and description.
5738
5739 2004-10-03  Paul N. Hilfinger  <hilfinger@gnat.com>
5740
5741         * gdb.texinfo (Filenames): Add Ada suffixes.
5742         (Ada) New section.
5743
5744 2004-09-27  Andrew Cagney  <cagney@gnu.org>
5745             Robert Picco  <Robert.Picco@hp.com>
5746
5747         * gdb.texinfo (Packets): Document the "p" packet.
5748
5749 2004-09-21  Jason Molenda  (jmolenda@apple.com)
5750
5751         * gdb.texinfo (Paths and Names of the Source Files): Document the
5752         meaning of values in the 'desc' field of a SO stab.
5753
5754 2004-09-20  Daniel Jacobowitz  <dan@debian.org>
5755
5756         * gdb.texinfo (Maintenance Commands): Document "maint set dwarf2
5757         max-cache-age" and "maint show dwarf2 max-cache-age".
5758
5759 2004-09-16  Eli Zaretskii  <eliz@gnu.org>
5760
5761         * gdb.texinfo (Set Breaks): Add index entry for setting
5762         breakpoints on overloaded C++ functions that are not members of
5763         any classes.  Add an example and an index entry for setting
5764         breakpoints on all program functions.
5765         (Character Sets, Macros, Overlay Commands)
5766         (Non-debug DLL symbols, GDB/MI Output Syntax)
5767         (Annotations Overview, Maintenance Commands, File-I/O Overview):
5768         Use "(@value{GDBP})" instead of a literal "(gdb)".
5769
5770 2004-09-12  Andrew Cagney  <cagney@gnu.org>
5771
5772         * gdbint.texinfo (Native Debugging): Delete description of
5773         FILES_INFO_HOOK.
5774
5775 2004-09-11  Paul Hilfinger  <hilfinger@gnat.com>
5776
5777         * gdbint.texinfo (User Interface): Change local_hex_string_custom
5778         to hex_string_custom (not historically correct, but more
5779         understandable, given the current code).
5780
5781 2004-09-03  Andrew Cagney  <cagney@gnu.org>
5782
5783         * gdbint.texinfo (Native Debugging): Delete SVR4_SHARED_LIBS.
5784
5785 2004-09-01  Jeff Johnston  <jjohnstn@redhat.com>
5786
5787         * observer.texi (solib_unloaded): New observer.
5788
5789 2004-08-24  Andrew Cagney  <cagney@gnu.org>
5790
5791         * gdbint.texinfo (Target Architecture Definition): Add missing
5792         comma.
5793
5794 2004-08-20  Michael Chastain  <mec.gnu@mindspring.com>
5795
5796         * (Using the Testsuite): build != host is supported,
5797         but some test scripts do not support build != host.
5798
5799 2004-08-14  Mark Kettenis  <kettenis@gnu.org>
5800
5801         * gdbint.texinfo (Host Definition): Delete description of
5802         FCLOSE_PROVIDED and GETENV_PROVIDED.
5803
5804 2004-08-05  Mark Kettenis  <kettenis@chello.nl>
5805
5806         * gdbint.texinfo (Host Definition): Delete description of
5807         NO_SYS_FILE.
5808         (Native Debugging): Delete description of KERNEL_U_ADDR_BSD and
5809         PTRACE_FP_BUG.
5810
5811 2004-08-05  Andrew Cagney  <cagney@gnu.org>
5812
5813         * gdbint.texinfo (Target Architecture Definition): Delete
5814         reference to deprecated_read_fp.
5815
5816 2004-08-02  Andrew Cagney  <cagney@gnu.org>
5817
5818         * gdbint.texinfo (Target Architecture Definition): Delete
5819         description of DEPRECATED_REGISTER_BYTES.
5820
5821 2004-07-30  Baurjan Ismagulov  <ibr@ata.cs.hun.edu.tr>
5822
5823         * gdb.texinfo (Source Path): Document the new behavior of
5824         searching for the source files.
5825
5826 2004-07-17  Eli Zaretskii  <eliz@gnu.org>
5827
5828         * gdb.texinfo (Edit): Fix markup of EDITOR and improve wording.
5829         (Search, Expressions, Arrays, Variables, Data, Machine Code)
5830         (Auto Display): Improve indexing.
5831
5832 2004-07-16  Andrew Cagney  <cagney@gnu.org>
5833
5834         * gdb.texinfo (Mode Options): Delete documentation on "-async" and
5835         "-noasync".
5836
5837 2004-07-09  Eli Zaretskii  <eliz@gnu.org>
5838
5839         * gdb.texinfo: Fix @kindex entries so that multiple commands that
5840         have the same prefix have only their prefix in the index.
5841
5842 2004-07-03  Mark Kettenis  <kettenis@gnu.org>
5843
5844         * gdb.texinfo (BSD libkvm Interface): New node (section)
5845         (Native): Add it to the menu.
5846
5847 2004-07-01  Mark Kettenis  <kettenis@gnu.org>
5848
5849         * gdbint.texinfo (Target Architecture Definition): Remove
5850         PCC_SOL_BROKEN.
5851
5852 2004-06-24  Mark Kettenis  <kettenis@gnu.org>
5853
5854         * gdbint.texinfo (Target Architecture Definition): Remove
5855         SUN_FIXED_LBRAC_BUG.
5856
5857 2004-06-26  Andrew Cagney  <cagney@gnu.org>
5858
5859         * gdbint.texinfo (Coding): Replace xasprintf with xstrprintf.
5860
5861 2004-06-20  Andrew Cagney  <cagney@gnu.org>
5862
5863         * gdbint.texinfo (Target Architecture Definition): Deprecate
5864         USE_STRUCT_CONVENTION.
5865
5866 2004-06-19  Michael Chastain  <mec.gnu@mindspring.com>
5867
5868         gdb.texinfo (Bug Reporting): Mention session recording,
5869         with the script command or Emacs.
5870
5871 2004-06-18  Andrew Cagney  <cagney@gnu.org>
5872
5873         * gdbint.texinfo (Target Architecture Definition): Deprecate
5874         FUNCTION_START_OFFSET.
5875
5876 2004-06-14  Andrew Cagney  <cagney@gnu.org>
5877
5878         Based on changes from Karl Berry.
5879         * gdb.texinfo: Do not use @sc in a direntry.
5880         * stabs.texinfo: Change @dircateogry to "Software development".
5881         * gdbint.texinfo, gdb.texinfo, annotate.texinfo: Ditto.
5882
5883 2004-06-13  Andrew Cagney  <cagney@gnu.org>
5884
5885         * gdbint.texinfo (Target Architecture Definition): Delete
5886         description of RETURN_VALUE_ON_STACK.
5887
5888 2004-06-09  Andrew Cagney  <cagney@gnu.org>
5889
5890         * gdbint.texinfo (Native Debugging): Restore "@table @code"
5891         deleted by previous patch.
5892
5893 2004-06-08  Andrew Cagney  <cagney@gnu.org>
5894
5895         * gdbint.texinfo (Native Debugging): Delete documentation on
5896         ATTACH_DETACH.
5897
5898 2004-06-06  Randolph Chung  <tausq@debian.org>
5899
5900         * gdb.texinfo (push_dummy_call): Use @code{struct value}.
5901
5902 2004-06-06  Randolph Chung  <tausq@debian.org>
5903
5904         * gdb.texinfo (push_dummy_call): Update argument list to match
5905         the new push_dummy_call method signature.  Describe the function
5906         argument.
5907
5908 2004-05-24  Joel Brobecker  <brobecker@gnat.com>
5909
5910         * gdb.texinfo (Starting): Document new start command.
5911
5912 2004-05-21  Andrew Cagney  <cagney@redhat.com>
5913
5914         * observer.texi (GDB Observers): Document "inferior_created".
5915
5916 2004-05-08  Andrew Cagney  <cagney@redhat.com>
5917
5918         * gdbint.texinfo (Target Architecture Definition): Delete
5919         description of DO_DEFERRED_STORES.
5920
5921         * gdbint.texinfo (Target Architecture Definition): Delete
5922         references to DEPRECATED_FIX_CALL_DUMMY.
5923
5924         * gdbint.texinfo (Target Architecture Definition): Delete
5925         description of DEPRECATED_CALL_DUMMY_WORDS,
5926         DEPRECATED_SIZEOF_CALL_DUMMY_WORDS, and CALL_DUMMY.
5927
5928         * gdbint.texinfo (Target Architecture Definition): Delete
5929         description of DEPRECATED_PUSH_DUMMY_FRAME.
5930
5931         * gdbint.texinfo (Target Architecture Definition): Delete
5932         reference to DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET.
5933
5934 2004-05-07  Andrew Cagney  <cagney@redhat.com>
5935
5936         * observer.texi (GDB Observers): Add "Debugging" section.  Include
5937         cross reference to "set/show debug observer".
5938         * gdb.texinfo (Debugging Output): Document "set/show debug
5939         observer".
5940
5941 2004-05-01  Andrew Cagney  <cagney@redhat.com>
5942
5943         * gdbint.texinfo (Target Architecture Definition): Delete
5944         description of DEPRECATED_PC_IN_SIGTRAMP.
5945
5946 2004-04-30  Andrew Cagney  <cagney@redhat.com>
5947
5948         * gdbint.texinfo (Target Architecture Definition): Delete
5949         documentation for BELIEVE_PCC_PROMOTION_TYPE, no longer defined.
5950
5951 2004-04-30  Orjan Friberg  <orjanf@axis.com>
5952
5953         * observer.texi (GDB Observers): Correct spelling.
5954
5955 2004-04-26  Orjan Friberg  <orjanf@axis.com>
5956
5957         * observer.texi (GDB Observers): Add target_changed event.
5958
5959 2004-04-08  Andrew Cagney  <cagney@redhat.com>
5960
5961         * observer.texi (GDB Observers): Rework, provide generic observer
5962         definitions and then a list of observable events.
5963
5964 2004-04-04  Andrew Cagney  <cagney@redhat.com>
5965
5966         * gdbint.texinfo (Host Definition): Delete reference to
5967         NO_SIGINTERRUPT.
5968
5969 2004-04-02  Andrew Cagney  <cagney@redhat.com>
5970
5971         * gdbint.texinfo (Target Architecture Definition): Delete
5972         reference to DEPRECATED_CALL_DUMMY_LENGTH.
5973
5974 2004-03-28  Stephane Carrez  <stcarrez@nerim.fr>
5975
5976         * gdb.texinfo (TUI Commands): Document tui reg commands.
5977
5978 2004-03-26  Andrew Cagney  <cagney@redhat.com>
5979
5980         * gdb.texinfo (TUI): Delete reference to --enable-tui.  Mention
5981         "gdbtui".
5982         (Mode Options): Mention "gdbtui".  Use "Text" not "Terminal".
5983         (Contributors): Mention both Text and Terminal User Interface.
5984
5985 2004-03-23  Andrew Cagney  <cagney@redhat.com>
5986
5987         * gdbint.texinfo (Target Architecture Definition): Deprecate
5988         references to SIGTRAMP_START and SIGTRAMP_END.
5989
5990 2004-03-23  Andrew Cagney  <cagney@redhat.com>
5991
5992         * gdbint.texinfo (Target Architecture Definition): Deprecate
5993         references to PC_IN_SIGTRAMP.
5994
5995 2004-03-19  Andrew Cagney  <cagney@redhat.com>
5996
5997         * gdbint.texinfo (Target Architecture Definition): Delete
5998         reference to GDB_TARGET_IS_HPPA.
5999
6000 2004-03-18  Andrew Cagney  <cagney@redhat.com>
6001
6002         * gdbint.texinfo (Coding): Update section on gdbarch_data,
6003         describe pre_init and post_init.
6004
6005 2004-03-09  Daniel Jacobowitz  <drow@mvista.com>
6006
6007         * gdb.texinfo (Debugging Output): Document values for "set debug
6008         target".
6009
6010 2004-02-28  Andrew Cagney  <cagney@redhat.com>
6011
6012         * gdb.texinfo (Contributors): Mention GDB 6.1 release engineer.
6013
6014 2004-02-26  Jeff Johnston  <jjohnstn@redhat.com>
6015
6016         * gdb.texinfo (breakpoints): Add information about the
6017         new "set breakpoint pending" and "show breakpoint pending"
6018         commands.
6019
6020 2004-02-26  Andrew Cagney  <cagney@redhat.com>
6021
6022         * gdbint.texinfo (Coding): Document use of gdbarch_obstack_zalloc
6023         in Per-architecture module data section.
6024
6025 2004-02-25  Roland McGrath  <roland@redhat.com>
6026
6027         * gdb.texinfo (General Query Packets): Document qPart:... packets.
6028
6029 2004-02-24  Andrew Cagney  <cagney@redhat.com>
6030
6031         * annotate.texinfo: Wrap fdl.texi include in raise/lower sections.
6032         * gdb.texinfo, gdbint.texinfo, stabs.texinfo: Ditto.
6033         * fdl.texi: Import Version 1.2, November 2002.
6034
6035 2004-02-17  Andrew Cagney  <cagney@redhat.com>
6036
6037         * gdb.texinfo (Mode Options): Note that "mi1" is deprecated.
6038
6039 2004-02-16  Andrew Cagney  <cagney@redhat.com>
6040
6041         * gdbint.texinfo (Target Architecture Definition): Deprecate
6042         FRAMELESS_FUNCTION_INVOCATION.
6043
6044 2004-02-16  Andrew Cagney  <cagney@redhat.com>
6045
6046         * gdbint.texinfo (Coding): Mention -Wunused-function.
6047
6048 2004-02-14  Andrew Cagney  <cagney@redhat.com>
6049
6050         * gdbint.texinfo (Target Architecture Definition): Delete
6051         description of DEPRECATED_CALL_DUMMY_STACK_ADJUST.
6052
6053 2004-02-12  Elena Zannoni  <ezannoni@redhat.com>
6054
6055         * gdb.texinfo: Properly quote the name "C++".
6056         * gdbint.texinfo: Ditto.
6057         * stabs.texinfo: Ditto.
6058
6059 2004-02-11  Elena Zannoni  <ezannoni@redhat.com>
6060
6061         * gdbint.texinfo (Support Libraries): Add doco about obstacks and
6062         minimal information about libiberty.
6063
6064 2004-02-06  Michael Chastain  <mec.gnu@mindspring.com>
6065
6066         * gdb.texinfo (Auxiliary Vector): Fix thinko with @value{GDBN}.
6067
6068 2004-02-04  Roland McGrath  <roland@redhat.com>
6069
6070         * gdb.texinfo (Auxiliary Vector): New node (section).
6071         (Data): Add it to the menu.
6072
6073 2004-02-02  Jeff Johnston  <jjohnstn@redhat.com>
6074
6075         * gdb.texinfo (Breakpoints): Add information about pending
6076         breakpoint support.
6077
6078 2004-01-26  Andrew Cagney  <cagney@redhat.com>
6079
6080         * gdb.texinfo (Overview): Delete references to the cisco protocol
6081         including the "N" response.
6082
6083 2004-01-26  Andrew Cagney  <cagney@redhat.com>
6084
6085         * gdbint.texinfo (Target Architecture Definition): Rename
6086         EXTRACT_STRUCT_VALUE_ADDRESS to
6087         DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS.
6088
6089 2004-01-24  Eli Zaretskii  <eliz@gnu.org>
6090
6091         * gdb.texinfo (KOD): Document "show os".  Add index entries for
6092         "set/show os" and "info cisco" commands.
6093
6094 2004-01-21  Eli Zaretskii  <eliz@gnu.org>
6095
6096         * Makefile.in (install-info): Prepend $(DESTDIR) to $(infodir).
6097
6098 2004-01-19  Michael Chastain  <mec.gnu@mindspring.com>
6099
6100         * gdbint.texinfo: Delete USE_MMALLOC, NO_MMCHECK, MMCHECK_FORCE,
6101         MMAP_BASE_ADDRESS, MMAP_INCREMENT.
6102
6103 2004-01-19  Nick Roberts  <nick@nick.uklinux.net>
6104
6105         * gdb.texinfo (GDB/MI Stack Manipulation): Describe extension to
6106         -stack-list-locals.
6107         (GDB/MI Variable Objects): Describe extension to
6108         -var-list-children.
6109
6110 2004-01-17  Daniel Jacobowitz  <drow@mvista.com>
6111
6112         * gdbint.texinfo (DECR_PC_AFTER_HW_BREAK): Don't document.
6113
6114 2004-01-17  Andrew Cagney  <cagney@redhat.com>
6115
6116         * gdbint.texinfo (Target Architecture Definition): Delete
6117         documentation on DEPRECATED_NPC_REGNUM.
6118
6119 2004-01-13  Daniel Jacobowitz  <drow@mvista.com>
6120
6121         * gdb.texinfo: Update copyright year.  Mention that set
6122         follow-fork-mode is supported on GNU/Linux.  Remove documentation of
6123         "set follow-fork-mode ask".
6124
6125 2004-01-13  Andrew Cagney  <cagney@redhat.com>
6126
6127         * gdbint.texinfo: Update copyright year.
6128         (Coding): Add -Wunused-label to list of -Werror warnings.
6129
6130 2004-01-08  Jason Molenda  <jmolenda@apple.com>
6131             Eli Zaretskii  <eliz@gnu.org>
6132
6133         * gdb.texinfo: Update copyright.
6134         (Objective-C): "methodName" typeo fixed.  Add @code/@var markup
6135         around names, as appropriate.  Minor syntax cleanup of
6136         _NSPrintForDebugger explanation.  Two spaces after periods.
6137         GDBN used instead of lit. "gdb".  Index entries added for
6138         print-object and _NSPrintForDebugger.  @noindent added in one spot.
6139
6140 2003-11-11  Elena Zannoni  <ezannoni@redhat.com>
6141
6142         * stabs.texinfo: Add dircategory and direntry commands.
6143         * annotate.texinfo: Ditto.
6144
6145 2003-11-10  Andrew Cagney  <cagney@redhat.com>
6146
6147         * gdbint.texinfo (Target Architecture Definition): Replace the
6148         return_value method's "inval" and "outval" parameters with
6149         "readbuf" and "writebuf".
6150
6151 2003-10-28  Jim Blandy  <jimb@redhat.com>
6152
6153         * gdb.texinfo (The F request packet, The F reply packet): Renamed
6154         from "The `F' request packet" and "The `F' reply packet", to make
6155         texi2dvi happy.
6156         (File-I/O remote protocol extension): Update menu entries, too.
6157
6158 2003-10-26  Michael Chastain  <mec@shout.net>
6159
6160         * gdb.texinfo (Thread Stops): Document the issue with
6161         premature return from system calls in multi-threaded programs.
6162
6163 2003-10-24  Andrew Cagney  <cagney@redhat.com>
6164
6165         * annotate.texinfo: Fix "fortunatly"[sic].
6166
6167 2003-10-23  Kei Sakamoto  <sakamoto.kei@renesas.com>
6168
6169         * gdb.texinfo (Contributors to GDB): Replace "Renesas"
6170         with "Hitachi" and "Mitsubishi".
6171
6172 2003-10-20  Andrew Cagney  <cagney@redhat.com>
6173
6174         * gdbint.texinfo (Target Architecture Definition): Document
6175         gdbarch_return_value.  Add cross references from
6176         USE_STRUCT_CONVENTION, EXTRACT_RETURN_VALUE, and
6177         STORE_RETURN_VALUE, and from/to EXTRACT_STRUCT_VALUE_ADDRESS.
6178
6179 2003-10-18  Mark Kettenis  <kettenis@gnu.org>
6180
6181         * gdbint.texinfo (Target Architecture Definition): Document
6182         regset_from_core_section.
6183
6184 2003-10-16  Kei Sakamot Sakamoto  <sakamoto.kei@renesas.com>
6185
6186         * gdb.texinfo (M32R/D): Mention m32rsdi target.
6187
6188 2003-10-15  Kevin Buettner  <kevinb@redhat.com>
6189
6190         From Anthony Green  <green@redhat.com>:
6191         * gdb.texinfo (Breakpoints related warnings): Insert into menu.
6192
6193 2003-10-14  Kevin Buettner  <kevinb@redhat.com>
6194
6195         * gdb.texinfo (Breakpoint related warnings): New node.
6196         * gdbint.texinfo (ADJUST_BREAKPOINT_ADDRESS): Document.
6197
6198 2003-10-13  Daniel Jacobowitz  <drow@mvista.com>
6199
6200         * gdb.texinfo (Remote Protocol): Document v and vCont.
6201
6202 2003-10-10  Kei Sakamoto  <sakamoto.kei@renesas.com>
6203
6204         * gdb.texinfo: Replace "Hitachi" and "Mitsubishi" with "Renesas".
6205         * gdbint.texinfo: Ditto.
6206
6207 2003-10-09  Andrew Cagney  <cagney@redhat.com>
6208
6209         From 2003-09-18 David Anderson <davea@sgi.com>:
6210         * gdb.texinfo (GDB/MI Symbol Query): Replace "comamnd" with
6211         "command".
6212
6213 2003-10-03  Andrew Cagney  <cagney@redhat.com>
6214
6215         * gdbint.texinfo (Target Architecture Definition): Deprecate
6216         IBM6000_TARGET.  Mention that it implies an RS/6000 system and not
6217         just target.
6218
6219 2003-10-02  Andrew Cagney  <cagney@redhat.com>
6220
6221         * gdbint.texinfo (Target Architecture Definition): Rename
6222         REGISTER_RAW_SIZE to DEPRECATED_REGISTER_RAW_SIZE.
6223         * gdb.texinfo (Packets, Stop Reply Packets): Ditto.
6224         * gdbint.texinfo (Target Architecture Definition): Rename
6225
6226 2003-09-30  Andrew Cagney  <cagney@redhat.com>
6227
6228         REGISTER_VIRTUAL_SIZE to DEPRECATED_REGISTER_VIRTUAL_SIZE.
6229         (Target Architecture Definition):
6230
6231         * gdbint.texinfo (Target Architecture Definition): Rename
6232         REGISTER_VIRTUAL_TYPE to DEPRECATED_REGISTER_VIRTUAL_TYPE.
6233
6234 2003-09-29  Andrew Cagney  <cagney@redhat.com>
6235
6236         * gdbint.texinfo (Target Architecture Definition): Delete
6237         documentation for NEED_TEXT_START_END.
6238
6239         * gdbint.texinfo (Target Architecture Definition): Rename
6240         NPC_REGNUM to DEPRECATED_NPC_REGNUM.  Add cross reference to
6241         TARGET_WRITE_PC.
6242
6243 2003-09-22  Michael Chastain  <mec@shout.net>
6244
6245         * gdbint.texinfo (Testsuite Organization): Change gdb.c++ to gdb.cp.
6246
6247 2003-09-21  Anthony Green  <green@redhat.com>
6248
6249         * gdbint.texinfo (Target Architecture Definition): Fix typos.
6250
6251 2003-09-21  Mark Kettenis  <kettenis@gnu.org>
6252
6253         * gdbint.texinfo (Target Architecture Definition): Document
6254         stabs_argument_has_addr.
6255
6256 2003-09-18  Andrew Cagney  <cagney@redhat.com>
6257
6258         * gdbint.texinfo (Target Architecture Definition): Delete
6259         documentation on REGISTER_NAMES.
6260
6261 2003-09-13  Mark Kettenis  <kettenis@gnu.org>
6262
6263         * gdbint.texinfo (Target Architecture Definition): Replace
6264         REG_STRUCT_HAS_ADDR with DEPRECATED_REG_STRUCT_HAS_ADDR.
6265
6266 2003-09-11  Andrew Cagney  <cagney@redhat.com>
6267
6268         * gdbint.texinfo (Target Architecture Definition): Replace
6269         STACK_ALIGN with DEPRECATED_STACK_ALIGN.
6270
6271 2003-08-18  Andrew Cagney  <cagney@redhat.com>
6272
6273         * gdbint.texinfo (Target Architecture Definition): Document
6274         "frame_red_zone_size".
6275
6276 2003-08-09  Andrew Cagney  <cagney@redhat.com>
6277
6278         * gdb.texinfo (Backtrace): Replace "set/show backtrace-below-main"
6279         with "set/show backtrace past-main" and "set/show backtrace
6280         limit".
6281
6282 2003-08-08  H.J. Lu  <hongjiu.lu@intel.com>
6283
6284         * Makefile.in (install-info): Support DESTDIR.
6285         (install-html): Likewise.
6286
6287 2003-08-07  Andrew Cagney  <cagney@redhat.com>
6288
6289         Patch from Nick Roberts.
6290         * gdb.texinfo (Using GDB under GNU Emacs): Fix/update key
6291         bindings.  Remove description of send-gdb-command.
6292
6293 2003-08-07  Andrew Cagney  <cagney@redhat.com>
6294
6295         * gdb.texinfo (Mode Options): Mention that "mi2" was included in
6296         GDB 6.0.
6297
6298 2003-08-06  Andrew Cagney  <cagney@redhat.com>
6299
6300         * gdb.texinfo (Mode Options): Mention that level three is the
6301         highest available and that level 2 is deprecated.
6302         (Annotations Overview): Mention annotation levels. Cross reference
6303         to "Limitations of the Annotation Interface" in annotate.texi.
6304         (TODO, Value Annotations, Frame Annotations): Delete section.
6305         (Displays, Breakpoint Info): Delete.
6306
6307 2003-08-04  Andrew Cagney  <cagney@redhat.com>
6308
6309         * agentexpr.texi: Delete @bye.
6310         * Makefile.in (STABS_DOC_SOURCE_INCLUDES): Add "fdl.texi"
6311         (stabs.info): Add $(srcdir) to include search path.
6312         (html): Depend on "annotate_toc.html", and not "annotate.html".
6313         * stabs.texinfo: Ditto.  Include "fdl.texi".
6314         * gdbint.texinfo: Update copyright statement's list of invariant
6315         sections.
6316
6317 2003-07-28  Andrew Cagney  <cagney@redhat.com>
6318
6319         * Makefile.in (INFO_DEPS): Add annotate.info.
6320         (dvi, ps, html, pdf): Add annotate.
6321         (ANNOTATE_DOC_SOURCE_INCLUDES): New macro.
6322         (ANNOTATE_DOC_BUILD_INCLUDES): New macro.
6323         (ANNOTATE_DOC_FILES): New macro.
6324         (ANNOTATE_TEX_TMPS): New macro.
6325         (annotate.info, annotate_toc.html): Specify dependencies.
6326         (annotate.ps, annotate.pdf, annotate.dvi): Ditto.
6327         * annotate.texinfo: Rename annotate.texi.  Get building.  Add
6328         "Migrating to GDB/MI" and "Limitations of the Annotation
6329         Interface" chapters.  Mention why it is not part of the user
6330         guide.  Update copyright notice.  Include "fdl.texi".
6331
6332 2003-07-26  Stephane Carrez  <stcarrez@nerim.fr>
6333
6334         * gdb.texinfo (TUI Keys): Document C-x o key to switch active window.
6335
6336 2003-07-24  Daniel Jacobowitz  <drow@mvista.com>
6337
6338         * gdbint.texinfo (libgdb components): Correct a GDB to GDBN.
6339
6340 2003-07-24  Daniel Jacobowitz  <drow@mvista.com>
6341
6342         * gdb.texinfo (Server): Mention pidof.
6343
6344 2003-07-22  Andrew Cagney  <cagney@redhat.com>
6345
6346         * gdbint.texinfo (Coding): Add -Wformat-nonliteral to -Werror
6347         list.
6348
6349 2003-06-28  Daniel Jacobowitz  <drow@mvista.com>
6350
6351         * gdb.texinfo (Logging output): New chapter.
6352
6353 2003-06-24  Joel Brobecker  <brobecker@gnat.com>
6354
6355         * gdb.texinfo (Unsupported languages): New section.
6356         (Languages): Add link to new section.
6357
6358 2003-06-22  Andrew Cagney  <cagney@redhat.com>
6359
6360         * gdb.texinfo (Contributors): Mention 6.0 release engineer.
6361
6362 2003-06-22  Daniel Jacobowitz  <drow@mvista.com>
6363
6364         * gdbint.texinfo (Coding): Clarify use of gdb_XXX.h headers.
6365
6366 2003-06-22  Daniel Jacobowitz  <drow@mvista.com>
6367
6368         * Makefile.in (SFILES_INCLUDED): Add agentexpr.texi.
6369         * agentexpr.texi: Retitle section, and change it to an appendix.
6370         Comment out texinfo initialization.  Factor a @var{} into two
6371         pieces to prevent makeinfo warnings.
6372         * gdb.texinfo: Add Agent Expressions appendix.
6373
6374 2003-06-19  Daniel Jacobowitz  <drow@mvista.com>
6375
6376         * gdbint.texinfo (Native Conditionals): Remove PREPARE_TO_PROCEED.
6377
6378 2003-06-18  Daniel Jacobowitz  <drow@mvista.com>
6379
6380         * gdb.texinfo (Remote Debugging): New section "Connecting to a
6381         remote target".  Document the "detach" and "disconnect" commands.
6382         (Server, Netware, Debug Session): Reference "Connecting to a
6383         remote target".
6384         (GDB/MI Target Manipulation): Document "-target-disconnect".
6385
6386 2003-06-13  Andrew Cagney  <cagney@redhat.com>
6387
6388         * gdbint.texinfo (Target Architecture Definition): Deprecate
6389         REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT, and
6390         BIG_REMOTE_BREAKPOINT.  Cross reference BREAKPOINT_FROM_PC.
6391
6392 2003-06-09  Jim Blandy  <jimb@redhat.com>
6393
6394         * gdb.texinfo (Separate Debug Files): Remove extra semicolon.
6395
6396 2003-06-08  Andrew Cagney  <cagney@redhat.com>
6397
6398         * gdbint.texinfo (Target Architecture Definition): Delete
6399         documentation on FRAME_ARGS_ADDRESS_CORRECT.
6400
6401 2003-06-08  Andrew Cagney  <cagney@redhat.com>
6402
6403         * gdbint.texinfo (Target Architecture Definition): Document
6404         "unwind_sp".  Cross reference "unwind_sp" and TARGET_READ_SP.
6405
6406 2003-06-07  Adam Fedor  <fedor@gnu.org>
6407
6408         * gdb.texinfo: Add Objective-C documentation.
6409
6410 2003-06-01  Andrew Cagney  <cagney@redhat.com>
6411
6412         * gdbint.texinfo (Target Architecture Definition): Add "func_addr"
6413         parameter to "push_dummy_call".  Rename "dummy_addr" to "bp_addr".
6414
6415 2003-05-21  Andrew Cagney  <cagney@redhat.com>
6416
6417         * gdbint.texinfo (Target Architecture Definition): Delete
6418         references to "extract_address" and "store_address".
6419
6420 2003-05-16  Andrew Cagney  <cagney@redhat.com>
6421
6422         * gdbint.texinfo (Target Architecture Definition): Replace
6423         REGISTER_BYTES with DEPRECATED_REGISTER_BYTES.  Fix typo,
6424         DEPRECATED_REGISTER_SIZE instead of REGISTER_BYTE.
6425
6426 2003-05-14  Theodore A. Roth  <troth@openavr.org>
6427
6428         * gdbint.texinfo (Breakpoint Handling): Correct a double negative.
6429
6430 2003-05-10  H.J. Lu <hongjiu.lu@intel.com>
6431
6432         * Makefile.in (gdb-cfg.texi): Replace $$LN_S with $(LN_S).
6433         (gdb.dvi): Likewise.
6434         (gdb.pdf): Likewise.
6435         (links2roff): Likewise.
6436
6437 2003-05-08  Jim Blandy  <jimb@redhat.com>
6438
6439         * gdb.texinfo (Dump/Restore Files): Update documentation for
6440         'dump', 'append', and 'restore': note that format argument is
6441         optional; simplify presentation of the command variants; and be
6442         more precise about the formats.
6443
6444 2003-05-07  Jim Blandy  <jimb@redhat.com>
6445
6446         * gdb.texinfo (Symbols): Update documentation: 'maint list
6447         symtabs' and 'maint list psymtabs' have been renamed 'maint info
6448         symtabs' and 'maint info psymtabs'.
6449
6450 2003-05-05  Andrew Cagney  <cagney@redhat.com>
6451
6452         * gdbint.texinfo (Target Architecture Definition): Make
6453         CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_LENGTH,
6454         FIX_CALL_DUMMY, CALL_DUMMY_BREAKPOINT_OFFSET and
6455         CALL_DUMMY_BREAKPOINT_OFFSET deprecated.
6456
6457 2003-05-04  Andrew Cagney  <cagney@redhat.com>
6458
6459         * gdb.texinfo (Maintenance Commands): Document "maint print
6460         dummy-frames".
6461
6462 2003-05-04  Andrew Cagney  <cagney@redhat.com>
6463
6464         * gdb.texinfo (GDB/MI Symbol Query): Use @{ and @}.
6465
6466 2003-05-03  J. Brobecker  <brobecker@gnat.com>
6467
6468         Thierry Schneider  <tpschneider1@yahoo.com>
6469         * gdb.texinfo (section GDB/MI Symbol Query): Add documentation
6470         for new MI command.
6471
6472 2003-05-03  Andrew Cagney  <cagney@redhat.com>
6473
6474         * gdbint.texinfo (Target Architecture Definition): Document
6475         push_dummy_code.  Add cross references.
6476
6477 2003-05-02  Elena Zannoni  <ezannoni@redhat.com>
6478
6479         * gdb.texinfo (Character Sets): Update to reflect new behavior of
6480         set/show charsets commands.
6481
6482 2003-04-28  Andrew Cagney  <cagney@redhat.com>
6483
6484         * gdbint.texinfo (Target Architecture Definition): Replace
6485         read_fp, TARGET_READ_FP and FP_REGNUM, with deprecated_read_fp,
6486         DEPRECATED_TARGET_READ_FP and DEPRECATED_REGNUM.
6487
6488 2003-04-28  Andrew Cagney  <cagney@redhat.com>
6489
6490         * gdbint.texinfo (Target Architecture Definition): Rename
6491         "tm_print_insn" to "deprecated_tm_print_insn".
6492
6493 2003-04-09  Jim Blandy  <jimb@redhat.com>
6494
6495         * gdb.texinfo (Symbols): Document 'maint list symtabs' and 'maint
6496         list psymtabs'.
6497
6498 2003-04-08  Andrew Cagney  <cagney@redhat.com>
6499
6500         * gdbint.texinfo (Target Architecture Definition): Delete
6501         references to EXTRA_FRAME_INFO.
6502
6503 2003-04-08  Andrew Cagney  <cagney@redhat.com>
6504
6505         * gdbint.texinfo (Target Architecture Definition): Delete
6506         PRINT_TYPELESS_INTEGER.
6507
6508 2003-04-02  J. Brobecker  <brobecker@gnat.com>
6509
6510         * observer.texi (GDB Observers): Adjust the documentation for the
6511         normal_stop notification to better describe reality. Fix a couple
6512         of minor typos.
6513
6514 2003-04-02  Bob Rossi  <bob_rossi@cox.net>
6515
6516         * gdb.texinfo (GDB/MI Program Control): Add
6517         '-file-list-exec-source-file'
6518
6519 2003-03-31  Andrew Cagney  <cagney@redhat.com>
6520
6521         * gdbint.texinfo (Target Architecture Definition): Delete
6522         references to CALL_DUMMY_P.
6523
6524 2003-03-30  Andrew Cagney  <cagney@redhat.com>
6525
6526         * gdbint.texinfo (Target Architecture Definition): Remove
6527         reference to TARGET_WRITE_SP.
6528
6529 2003-03-27  Andrew Cagney  <cagney@redhat.com>
6530
6531         * gdbint.texinfo (Target Architecture Definition): Remove
6532         references to write_sp.
6533
6534 2003-03-27  Andrew Cagney  <cagney@redhat.com>
6535
6536         * gdb.texinfo (GDB/MI Variable Objects): Replace @include with
6537         chapter body.  Use @smallexample instead of @example.
6538         (Annotations): Ditto.
6539         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Remove gdbmi.texinfo and
6540         annotate.texi.
6541
6542 2003-03-26  Andrew Cagney  <cagney@redhat.com>
6543
6544         * gdbint.texinfo (Target Architecture Definition): Replace
6545         PUSH_ARGUMENTS with push_dummy_call, add gdbarch, regcache and
6546         dummy_addr parameters.
6547
6548 2003-03-25  Andrew Cagney  <cagney@redhat.com>
6549
6550         * gdbint.texinfo (Target Architecture Definition): Delete
6551         reference to CALL_DUMMY_STACK_ADJUST_P.  Rename
6552         CALL_DUMMY_STACK_ADJUST to DEPRECATED_CALL_DUMMY_STACK_ADJUST.
6553         Add reference to PUSH_ARGUMENTS.
6554
6555 2003-03-23  Andrew Cagney  <cagney@redhat.com>
6556
6557         * gdbint.texinfo (Algorithms, Target Architecture Definition):
6558         Deprecate FRAME_CHAIN and FRAME_CHAIN_VALID.
6559
6560 2003-03-18  J. Brobecker  <brobecker@gnat.com>
6561
6562         * gdbint.texinfo (Algorithms): Add new section describing the
6563         Observer paradigm.
6564         (Top): Add menu entry to new observer appendix.
6565         * observer.texi: New file.
6566         * Makefile.in (GDBINT_DOC_SOURCE_INCLUDES): Add dependency on
6567         new observer.texi file.
6568
6569 2003-03-17  Andrew Cagney  <cagney@redhat.com>
6570
6571         * gdb.texinfo (DATE): Delete.  Remove date from titles.  Mention
6572         that GNU Press update the manual version number.
6573
6574 2003-03-12  Andrew Cagney  <cagney@redhat.com>
6575
6576         * gdbint.texinfo (Target Architecture Definition): Delete
6577         references to get_saved_register.  Rename GET_SAVED_REGISTER to
6578         DEPRECATED_GET_SAVED_REGISTER.
6579
6580 2003-03-13  Andrew Cagney  <cagney@redhat.com>
6581
6582         * gdbint.texinfo (Target Architecture Definition): Replace
6583         POP_FRAME with DEPRECATED_POP_FRAME.  Update description.
6584
6585 2003-03-12  Andrew Cagney  <cagney@redhat.com>
6586
6587         * gdbint.texinfo (Target Architecture Definition): Rename
6588         FRAME_SAVED_PC to DEPRECATED_FRAME_SAVED_PC.
6589
6590 2003-03-10  Corinna Vinschen  <vinschen@redhat.com>
6591
6592         * gdb.texinfo: Add File-I/O documentation.
6593
6594 2003-03-10  Andrew Cagney  <cagney@redhat.com>
6595
6596         * gdbint.texinfo (Target Architecture Definition): Cross reference
6597         FRAME_SAVED_PC to unwind_pc.  Document unwind_pc.
6598
6599 2003-03-07  Andrew Cagney  <cagney@redhat.com>
6600
6601         * gdb.texinfo (Debugging Output): Mention the "set/show debug
6602         frame" command.
6603
6604 2003-03-05  Andrew Cagney  <cagney@redhat.com>
6605
6606         * gdbint.texinfo (Target Architecture Definition): Document
6607         unwind_dummy_id.  Cross reference unwind_dummy_id and
6608         SAVE_DUMMY_FRAME_TOS.
6609
6610 2003-03-05  James Ingham <jingham@apple.com>
6611             Daniel Jacobowitz  <drow@mvista.com>
6612
6613         * gdb.texinfo (Configuring the current ABI): Document "set cp-abi"
6614         and "show cp-abi".
6615
6616 2003-03-03  Andrew Cagney  <cagney@redhat.com>
6617
6618         * gdbint.texinfo (Target Architecture Definition): Document
6619         register_type.
6620
6621 2003-03-03  Andrew Cagney  <cagney@redhat.com>
6622
6623         * stabs.texinfo (Structures): Use @samp and separate @var's
6624         instead of a single @var containing a comma separated list.
6625         (Unions): Ditto.
6626
6627 2003-03-02  Daniel Jacobowitz  <drow@mvista.com>
6628
6629         * Makefile.in (distclean): Remove config.log.
6630
6631 2003-03-01  Andrew Cagney  <cagney@redhat.com>
6632
6633         * gdbint.texinfo (Target Architecture Definition): Rename
6634         FRAME_INIT_SAVED_REGS to DEPRECATED_FRAME_INIT_SAVED_REGS.
6635
6636 2003-03-01  Andrew Cagney  <cagney@redhat.com>
6637
6638         * gdbint.texinfo: Rename INIT_EXTRA_FRAME_INFO to
6639         DEPRECATED_INIT_EXTRA_FRAME_INFO.
6640
6641 2003-02-23  Raoul Gough  <RaoulGough@yahoo.co.uk>
6642
6643         * gdb.texinfo (Cygwin Native): Links to Non-debug DLL symbols.
6644         (Non-debug DLL symbols): New node, describing the minimal symbols
6645         loaded from DLLs without real debugging symbols.
6646
6647 2003-02-20  Andrew Cagney  <ac131313@redhat.com>
6648
6649         * gdb.texinfo (Set Breaks): Add cross reference to "set remote
6650         hardware-breakpoint-limit".
6651         (Set Watchpoints): Add cross reference to "set remote
6652         hardware-watchpoint-limit".
6653         (Remote configuration options): New section.
6654
6655 2003-02-04  Andrew Cagney  <ac131313@redhat.com>
6656
6657         * gdbint.texinfo (Target Architecture Definition): Delete
6658         descrption of IS_TRAPPED_INTERNALVAR.
6659
6660         From Keith Seitz <keiths@redhat.com>:
6661         * gdb.texinfo (Interpreters): New chapter.  Refer the command-line
6662         option "-i"/"--interpreter" to this chapter.  Include index
6663         entries.
6664
6665 2003-02-04  David Carlton  <carlton@math.stanford.edu>
6666
6667         * gdb.texinfo (C@t{++}): Recommend DWARF 2, then stabs+.
6668         (Variables): Recommend stabs+ and DWARF 2.
6669         (C plus plus expressions): Correct info about
6670         compiler versions, debug formats.
6671         (Contributors): Change 'DWARF2' to 'DWARF 2'.
6672         PR symtab/874.
6673
6674 2003-02-01  Andrew Cagney  <ac131313@redhat.com>
6675
6676         * gdbint.texinfo (Target Architecture Definition): Delete
6677         description of ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES,
6678         ADDITIONAL_OPTION_HANDLER, and ADDITIONAL_OPTION_HELP, and
6679         BEFORE_MAIN_LOOP_HOOK, and DBX_PARM_SYMBOL_CLASS along with
6680         references to nindy and i960.
6681         * gdb.texinfo (i960): Delete all references to i960 and nindy.
6682
6683 2003-02-01  Andrew Cagney  <ac131313@redhat.com>
6684
6685         * gdbint.texinfo (Target Architecture Definition): Delete
6686         FLOAT_INFO.
6687
6688 2003-01-30  Andrew Cagney  <ac131313@redhat.com>
6689
6690         * stabs.texinfo (Member Type Descriptor): Clarify description of
6691         `@'.  Suggested by Ben Hutchings.
6692
6693 2003-01-29  Andrew Cagney  <ac131313@redhat.com>
6694
6695         * gdb.texinfo (M68K): Delete reference to es1800.
6696
6697 2003-01-29  Andrew Cagney  <ac131313@redhat.com>
6698
6699         * gdb.texinfo (Maintenance Commands): Document `maint print
6700         reggroups' and `maint print register-groups'.
6701         * gdbint.texinfo (Target Architecture Definition): Document
6702         register_reggroup_p.
6703
6704 2003-01-23  Jim Blandy  <jimb@redhat.com>
6705
6706         * gdb.texinfo (Separate Debug Files): New section.
6707
6708 2003-01-22  Daniel Jacobowitz  <drow@mvista.com>
6709
6710         * gdb.texinfo (Maintenance Commands): Add "maint set profile"
6711         and "maint show profile".
6712
6713 2003-01-16  Michael Chastain  <mec@shout.net>
6714
6715         * gdb.texinfo (Installing GDB): Warn against
6716         ".../gdb-VERSION/gdb/configure".
6717         (Separate Objdir): Likewise.
6718
6719 2003-01-15  Andrew Cagney  <ac131313@redhat.com>
6720
6721         * gdbint.texinfo (Target Architecture Definition): Delete
6722         definition of PRINT_REGISTER_HOOK.
6723
6724 2003-01-15  Elena Zannoni  <ezannoni@redhat.com>
6725
6726         (OpenRISC 1000): Fix formatting of command names.
6727
6728 2003-01-15  Elena Zannoni  <ezannoni@redhat.com>
6729
6730         * gdb.texinfo (Continuing and Stepping): Add new command
6731         'advance'. Clarify behavior of 'until'.
6732
6733 2003-01-13  Daniel Jacobowitz  <drow@mvista.com>
6734
6735         * gdb.texinfo (Files): Document solib-absolute-prefix and
6736         solib-search-path.
6737
6738 2003-01-09  Michael Chastain  <mec@shout.net>
6739
6740         * gdbint.texinfo (Configuring @value{GDBN} for Release): Delete.
6741         (Create a Release): Add new instructions for new @file{src-release}.
6742         Document existing instructions for @file{Makefile.in} as
6743         being for @value{GDBN} 5.3.1 or earlier.
6744
6745 2003-01-09  Andrew Cagney  <ac131313@redhat.com>
6746
6747         * gdbint.texinfo (Target Architecture Definition): Mention
6748         frame_saved_regs_zalloc and frame_extra_info_zalloc as the way to
6749         allocate memory.
6750
6751 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
6752
6753         * gdb.texinfo (Controlling GDB): Add @kindex for
6754         "show osabi".
6755         (Backtraces): Add @kindex's for backtrace-below-main.
6756
6757 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
6758
6759         * gdb.texinfo (Controlling GDB): Document "set osabi".
6760
6761 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
6762
6763         * gdb.texinfo (Backtraces): Document "set backtrace-below-main".
6764         * gdbint.texinfo (FRAME_CHAIN_VALID): Update documentation.
6765
6766 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
6767
6768         * gdb.texinfo (Controlling GDB): Add ABI section.  Document
6769         "set coerce-float-to-double".
6770         * gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Remove documentation.
6771
6772 2003-01-02  Andrew Cagney  <ac131313@redhat.com>
6773
6774         * stabs.texinfo: Remove obsolete text.
6775         * gdbint.texinfo: Ditto.
6776         * gdb.texinfo: Ditto.
6777
6778 2002-12-22  Mark Kettenis  <kettenis@gnu.org>
6779
6780         * gdbint.texinfo (Target Architecture Definition): Update
6781         description of gdbarch_register_osabi.
6782
6783 2002-12-20  Kazu Hirata  <kazu@cs.umass.edu>
6784
6785         * agentexpr.texi: Fix typos.
6786         * annotate.texi: Likewise.
6787         * fdl.texi: Likewise.
6788
6789 2002-12-10  Andrew Cagney  <cagney@redhat.com>
6790
6791         * gdbint.texinfo (Algorithms): Replace INIT_FRAME_PC with
6792         DEPRECATED_INIT_FRAME_PC.
6793
6794 2002-12-01  Andrew Cagney  <ac131313@redhat.com>
6795
6796         * gdbint.texinfo (Target Architecture Definition): Delete
6797         PC_IN_CALL_DUMMY.
6798
6799 2002-11-28  Andrew Cagney  <ac131313@redhat.com>
6800
6801         * gdbint.texinfo (Host Definition): Delete documentation on
6802         USE_GENERIC_DUMMY_FRAMES.
6803
6804 2002-11-26  Elena Zannoni  <ezannoni@redhat.com>
6805
6806         Fix PR gdb/723 and PR gdb/245.
6807         * Makefile.in (install-info): Run the install-info command as part
6808         of the post install steps only.
6809         (uninstall-info): New target.
6810         (uninstall): New target.
6811
6812 2002-11-22  Elena Zannoni  <ezannoni@redhat.com>
6813
6814         * Makefile.in (install): Make install do some real work.
6815
6816 2002-11-19  Andrew Cagney  <ac131313@redhat.com>
6817
6818         Fix POSIX problem reported by Paul Eggert.
6819         * Makefile.in (GDBvn.texi): Use `sed q' instead of `head -1'.
6820         Fix PR gdb/527.
6821
6822 2002-10-26  Andrew Cagney  <cagney@redhat.com>
6823
6824         * gdbint.texinfo (Target Architecture Definition): Delete
6825         definition of DO_REGISTERS_INFO.
6826
6827 2002-10-18  Kevin Buettner  <kevinb@redhat.com>
6828
6829         * gdbint.texinfo (Address Classes): Fix problems with insertion
6830         of ``{'' and ``}'' in example.
6831
6832 2002-10-17  Kevin Buettner  <kevinb@redhat.com>
6833
6834         * gdbint.texinfo (Address Classes): New section.
6835         (Target Conditionals): Document ADDRESS_CLASS_NAME_TO_TYPE_FLAGS,
6836         ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS,
6837         ADDRESS_CLASS_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, and
6838         ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P.
6839
6840 2002-10-11  Klee Dienes  <kdienes@apple.com>
6841
6842         * gdb.texinfo (Registers): Mention vector registers as well as
6843         floating registers in the documentation for 'info registers' and
6844         'info all-registers'.
6845
6846 2002-10-11  Daniel Jacobowitz  <drow@mvista.com>
6847
6848         * gdbint.texinfo (CPLUS_MARKER): Remove item.
6849
6850 2002-10-03  Jeff Johnston  <jjohnstn@redhat.com>
6851
6852         * gdbint.texinfo (Item Output Functions): Add new ui_out_field_fmt_int
6853         interface definition.
6854
6855 2002-10-03  Marko Mlinar   <markom@opencores.org>
6856
6857         * gdb.texinfo (Target Commands): Add or1k target specific
6858         commands.
6859         * gdb.texinfo (Contributors): Add myself to the contributors list.
6860
6861 2002-10-01  Andrew Cagney  <ac131313@redhat.com>
6862
6863         * gdb.texinfo (Mode Options): Update --interpreter option.  "mi2"
6864         and "mi1" instead of "mi1" and "mi0".
6865
6866 2002-09-29  Hans-Peter Nilsson  <hp@bitrange.com>
6867
6868         * gdb.texinfo (Packets): Fix typos "alligned".
6869         Correct z3/Z3 description.  Correct z4/Z4 title.
6870
6871 2002-09-27  Andrew Cagney  <ac131313@redhat.com>
6872
6873         * all-cfg.texi: Use @sc for GDB and GCC.  Update copyright.
6874
6875 2002-09-25  Kevin Buettner  <kevinb@redhat.com>
6876
6877         * gdb.texinfo: Use GNU/Linux instead of Linux.
6878
6879 2002-09-25  Andrew Cagney  <ac131313@redhat.com>
6880
6881         * gdb.texinfo (Packets): Replace @samp{} with ``an empty string''.
6882
6883 2002-09-24  Andrew Cagney  <ac131313@redhat.com>
6884
6885         * gdb.texinfo: Replace @example with @smallexample.
6886
6887 2002-09-20  Kevin Buettner  <kevinb@redhat.com>
6888
6889         From Eli Zaretskii  <eliz@gnu.org>:
6890         * gdb.texinfo (Character Sets): Use @smallexample instead of
6891         @example.  Use GNU/Linux instead of Linux.
6892
6893 2002-09-20  Jim Blandy  <jimb@redhat.com>
6894
6895         * gdb.texinfo: Add character set documentation.
6896
6897 2002-09-19  Andrew Cagney  <ac131313@redhat.com>
6898
6899         * gdb.texinfo (Packets): Revise `z' and `Z' packet documentation.
6900         (Packets): Add cross reference from `b' packet to `z' packets.
6901
6902 2002-09-19  Andrew Cagney  <ac131313@redhat.com>
6903
6904         * gdb.texinfo (Maintenance Commands): Document ``maint
6905         internal-error'' and ``maint internal-warning''.
6906
6907         * gdbint.texinfo (Target Architecture Definition): Revise
6908         description of STACK_ALIGN.  Add description of FRAME_ALIGN.
6909
6910 2002-09-19  Joel Brobecker  <brobecker@gnat.com>
6911
6912         * gdbint.texinfo (Target Conditionals): Document the new
6913         NAME_OF_MALLOC macro.
6914
6915 2002-09-05  Andrew Cagney  <ac131313@redhat.com>
6916
6917         * gdb.texinfo (Contributors): Mention 5.2 and 5.3 release
6918         engineer.
6919
6920 2002-09-02  Stephane Carrez  <stcarrez@nerim.fr>
6921
6922         * gdb.texinfo (TUI Overview): Document status line fields.
6923
6924 2002-09-02  Stephane Carrez  <stcarrez@nerim.fr>
6925
6926         * gdb.texinfo (TUI Commands): Document info win command.
6927
6928 2002-09-01  Stephane Carrez  <stcarrez@nerim.fr>
6929
6930         * gdb.texinfo (TUI Overview): Document breakpoint markers.
6931
6932 2002-09-01  Stephane Carrez  <stcarrez@nerim.fr>
6933
6934         * gdb.texinfo (TUI Single Key Mode): Document new SingleKey mode.
6935         (TUI Keys): Likewise.
6936
6937 2002-08-25  Andrew Cagney  <ac131313@redhat.com>
6938
6939         * gdb.texinfo (Examples): Use ``->'' for a packet send and ``<-''
6940         for a packet receive.
6941
6942 2002-08-25  Andrew Cagney  <ac131313@redhat.com>
6943
6944         * Makefile.in (clean): Move to end of file.
6945         (distclean, maintainer-clean, realclean): Ditto.
6946         (mostlyclean): Move rule to end of file.  Use GDB_TEX_TMPS,
6947         GDBINT_TEX_TMPS, STABS_TEX_TMPS.
6948         (gdb.dvi, gdb.pdf): Do not cleanup TeX temp files after texi2dvi.
6949         (gdbint.dvi, gdbint.pdf, stabs.dvi, stabs.pdf): Ditto.
6950
6951 2002-08-24  Andrew Cagney  <ac131313@redhat.com>
6952
6953         * Makefile.in (GDBINT_TEX_TMPS): Define.
6954         (gdbint.dvi, gdbint.pdf): Use
6955         (GDB_TEX_TMPS): Define.
6956         (gdb.dvi, gdb.pdf): Use.
6957         (STABS_TEX_TMPS): Define.
6958         (stabs.dvi, stabs.pdf): Use.
6959         (GDB_DOC_SOURCE_INCLUDES): New macros.
6960         (GDB_DOC_BUILD_INCLUDES, GDB_DOC_FILES): New macros.
6961         (GDBINT_DOC_FILES_INCLUDES): New macros.
6962         (GDBINT_DOC_BUILD_INCLUDES): New macros.
6963         (GDBINT_DOC_FILES, STABS_DOC_SOURCE_INCLUDES): New macros.
6964         (STABS_DOC_BUILD_INCLUDES, STABS_DOC_FILES): New macros.
6965         (SFILES_DOC, SFILES_INCLUDED, SFILES_LOCAL): Delete macros.
6966         (links2roff): Replace SFILES_INCLUDED with
6967         GDB_DOC_SOURCE_INCLUDES.
6968         (gdb.dvi, gdb_toc.html, gdb.pdf, gdb.info): Update dependencies.
6969         (gdb.me, gdb.mm, gdb.ms): Update dependencies.
6970         (gdbint.dvi, gdbint_toc.html, gdbint.pdf, gdbint.info): Update
6971         dependencies.
6972         (stabs.info, stabs_toc.html, stabs.pdf, stabs.dvi): Update
6973         dependencies.
6974         (gdbmi.texinfo): Delete rule.
6975         (inc-hist.texinfo): Delete rule.
6976         (rluser.texinfo): Delete rule.
6977
6978 2002-08-23  Andrew Cagney  <cagney@redhat.com>
6979
6980         * gdbint.texinfo (Target Architecture Definition): Update
6981         STORE_RETURN_VALUE, mention regcache.
6982
6983 2002-08-21  Andrew Cagney  <ac131313@redhat.com>
6984
6985         * gdbint.texinfo (Target Architecture Definition): Document
6986         print_registers_info.  Note that DO_REGISTERS_INFO is deprecated.
6987
6988 2002-08-19  Andrew Cagney  <ac131313@redhat.com>
6989
6990         * gdb.texinfo (Remote Protocol): Reformat.  Use cross references.
6991         Fix minor typos.  Add index entries.
6992
6993 2002-08-18  Andrew Cagney  <ac131313@redhat.com>
6994
6995         * gdb.texinfo (Data): Add ``Vector Unit'' to menu.
6996
6997 2002-08-15  Andrew Cagney  <ac131313@redhat.com>
6998
6999         * gdbint.texinfo (Target Architecture Definition): Document
7000         PRINT_VECTOR_INFO.
7001         * gdb.texinfo (Vector Unit): Document "info vectors" command.
7002
7003 2002-08-13  Andrew Cagney  <ac131313@redhat.com>
7004
7005         * gdb.texinfo (Maintenance Commands): Document "maint print
7006         registers", "maint print raw-registers" and "maint print
7007         cooked-registers".
7008
7009 2002-08-08  Grace Sainsbury  <graces@redhat.com>
7010
7011         From Mark Salter:
7012         * gdb.texinfo (Protocol): Document T packet extension to
7013         allow watchpoint address reporting.
7014
7015 2002-08-03  Andrew Cagney  <ac131313@redhat.com>
7016
7017         * gdb.texinfo (Dump/Restore Files): Move `[]' to outside of @var.
7018
7019 2002-08-01  Andrew Cagney  <cagney@redhat.com>
7020
7021         * stabs.texinfo, gdb.texinfo, gdbint.texinfo: Obsolete references
7022         to CHILL.
7023
7024 2002-08-01  Andrew Cagney  <ac131313@redhat.com>
7025
7026         * gdbint.texinfo (Coding): Revise section "Include Files".
7027
7028 2002-07-24  Andrew Cagney  <cagney@redhat.com>
7029
7030         * gdbint.texinfo: Obsolete references to m88k.
7031         * gdb.texinfo: Ditto.
7032
7033 2002-07-10  Joel Brobecker  <brobecker@gnat.com>
7034
7035         * gdbint.texinfo (Create a release candiate): Add the location
7036         where the proper version of autoconf can be retrieved.
7037
7038 2002-07-09  Don Howard  <dhoward@redhat.com>
7039
7040         * gdb.texinfo (Command Files): Further describe the behavior of
7041         sourced command files.
7042
7043 2002-06-27  Andrew Cagney  <ac131313@redhat.com>
7044
7045         * gdbint.texinfo (User Interface): ISO C rather than ISO-C.
7046         (Coding): Clarify ISO C version that GDB assumes.
7047
7048 2002-06-26  Tom Tromey  <tromey@redhat.com>
7049
7050         * gdbint.texinfo (User Interface): Mention add_setshow_cmd and
7051         add_setshow_cmd_full.
7052
7053 2002-06-25  Don Howard  <dhoward@redhat.com>
7054
7055         * gdb.texinfo (Memory Region Attributes): Document new behavior
7056         for 'mem' command.
7057
7058 2002-06-11  Jim Blandy  <jimb@redhat.com>
7059
7060         * gdb.texinfo (Symbols): Update documentation for `info source'
7061         command.
7062
7063         * gdb.texinfo (Macros): Call the command `info macro', not
7064         `show macro'.
7065
7066 2002-06-09  Andrew Cagney  <ac131313@redhat.com>
7067
7068         * gdbint.texinfo (Coding): Add section ``Per-architecture module
7069         data''.
7070
7071 2002-06-09  Mark Kettenis  <kettenis@gnu.org>
7072
7073         * gdbint.texinfo (Target Architecture Definition): Document
7074         GDB_OSABI_GO32 and GDB_OSABI_NETWARE.
7075
7076 2002-06-08  Andrew Cagney  <ac131313@redhat.com>
7077
7078         * gdbint.texinfo (Releasing GDB): Fix typos in @itemize @bullet
7079         lists.
7080
7081 2002-06-08  Andrew Cagney  <ac131313@redhat.com>
7082
7083         * gdbint.texinfo (Releasing GDB): Revise the section ``Cut the
7084         Branch''.
7085
7086 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
7087
7088         * gdbint.texinfo (Target Architecture Definition): Add section
7089         ``Converting an existing Target Architecture to Multi-arch''.
7090
7091 2002-05-30  Andrew Cagney  <ac131313@redhat.com>
7092
7093         * gdbint.texinfo (Releasing GDB): Rename ``Obsoleting any code''
7094         to ``Obsoleting code''.  Revise.
7095
7096 2002-05-17  Jim Blandy  <jimb@redhat.com>
7097
7098         * gdb.texinfo (C Preprocessor Macros): New chapter.
7099         Include it in the main menu.
7100         (Contributors): Credit Jim Blandy with macro support.
7101         (Compilation): Explain how to get macro information into the
7102         executable.
7103         (Expressions): Note that preprocessor macros are expanded.
7104
7105 2002-05-14  Daniel Jacobowitz  <drow@mvista.com>
7106
7107         * gdb.texinfo (Debug Session): Document new `udp:' and `tcp:'
7108         options for `target remote'.
7109
7110 2002-05-13  Andrew Cagney  <ac131313@redhat.com>
7111
7112         * gdbint.texinfo (Target Architecture Definition): Delete
7113         documentation on NNPC_REGNUM.
7114
7115 2002-05-11  Andrew Cagney  <ac131313@redhat.com>
7116
7117         * gdbint.texinfo (Target Architecture Definition): Document
7118         REGISTER_TO_VALUE and VALUE_TO_REGISTER and CONVERT_REGISTER_P.
7119         (Target Architecture Definition): Revise section `Using Different
7120         Register and Memory Data Representations'.  Add section `Raw and
7121         Virtual Register Representations'.
7122
7123 2002-05-11  Andrew Cagney  <ac131313@redhat.com>
7124
7125         * gdbint.texinfo (Target Architecture Definition): Mention
7126         defaults for REGISTER_VIRTUAL_SIZE and REGISTER_RAW_SIZE.
7127         (Target Architecture Definition): Mention same.  Add references to
7128         web pages.
7129
7130 2002-05-08  Michael Snyder  <msnyder@redhat.com>
7131
7132         * stabs.texinfo (Attributes): Document new "vector" attribute.
7133
7134 2002-05-04  Andrew Cagney  <ac131313@redhat.com>
7135
7136         * gdbint.texinfo (Releasing GDB): Revise `Create a Release'.
7137
7138 2002-05-04  Andrew Cagney  <ac131313@redhat.com>
7139
7140         * gdb.texinfo: Delete obsolete references to a29k.
7141
7142 2002-04-24  Andrew Cagney  <ac131313@redhat.com>
7143
7144         * gdbint.texinfo (Target Architecture Definition): Replace
7145         IN_SIGTRAMP with PC_IN_SIGTRAMP.
7146
7147 2002-04-24  David S. Miller  <davem@redhat.com>
7148
7149         * gdbint.texinfo (REGISTER_IN_WINDOW): Delete definition.
7150
7151 2002-04-21  David S. Miller  <davem@redhat.com>
7152
7153         * gdbint.texinfo (SKIP_PROLOGUE_FRAMELESS_P): Delete definition.
7154
7155 2002-04-21  Andrew Cagney  <ac131313@redhat.com>
7156
7157         * gdbint.texinfo (Target Architecture Definition): Delete
7158         definition of HAVE_REGISTER_WINDOWS.
7159
7160 2002-04-19  Eli Zaretskii  <eliz@gnu.org>
7161
7162         * gdbint.texinfo (Releasing GDB, Coding): Fix typos.  Reported by
7163         "Theodore A. Roth" <troth@verinet.com>.
7164
7165 2002-04-15  Don Howard  <dhoward@redhat.com>
7166
7167         From Eli Zaretskii <eliz@gnu.org>
7168         * gdb.texinfo (show max-user-call-depth): Correct formatting.
7169         Provide a better explaination of this feature.
7170
7171 2002-04-14  Andrew Cagney  <ac131313@redhat.com>
7172
7173         * gdbint.texinfo (Target Architecture Definition): Remove
7174         FRAME_CHAIN_COMBINE.
7175
7176 2002-04-12  Michael Chastain  <mec@shout.net>
7177
7178         * gdbint.texinfo (Obsolete Conditionals): Remove reference to
7179         REG_STACK_SEGMENT.
7180
7181 2002-04-09  Michael Chastain  <mec@shout.net>
7182
7183         * gdbint.texinfo (Obsolete Conditionals): Remove references to
7184         PYRAMID_* macros.
7185
7186 2002-04-07  Andrew Cagney  <ac131313@redhat.com>
7187
7188         * gdb.texinfo (Bug Reporting): Document that the web is the
7189         prefered way of submitting bug reports.
7190         (Bug Reporting): Delete the s-mail address as the last resort.
7191
7192 2002-04-05  Andrew Cagney  <ac131313@redhat.com>
7193
7194         * gdbint.texinfo (Target Architecture Definition): Delete
7195         references to TARGET_WRITE_FP and write_fp.
7196
7197 2002-03-27  Michael Snyder  <msnyder@redhat.com>
7198
7199         * gdb.texinfo: Document new commands dump, append, and restore.
7200
7201 2002-03-27  Andrew Cagney  <ac131313@redhat.com>
7202
7203         * gdbint.texinfo (Releasing GDB): Revise the section `Before the
7204         Branch'.
7205
7206 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
7207
7208         * gdb.texinfo: Change all examples to @smallexample.
7209         * gdbint.texinfo: Ditto.
7210
7211 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
7212
7213         * gdbint.texinfo (Releasing GDB): Add section ``Versions and
7214         Branches''.
7215
7216 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
7217
7218         * gdbint.texinfo (Releasing GDB): Add the section``Branch Commit
7219         Policy''.
7220
7221 2002-03-04  Fred Fish  <fnf@redhat.com>
7222
7223         * gdbint.texinfo: Fix a bunch of typos (alsways, mirrorred,
7224         expresson, suports, dependant, trhe, perhaphs, situtations,
7225         explictily, taged, oportunity, unfortunatly).
7226
7227 2002-02-24  Andrew Cagney  <ac131313@redhat.com>
7228
7229         * Makefile.in (gdb.info): Add explicit path to gdb.texinfo.
7230         Remove reference to 3.12.
7231
7232 2002-02-23  Andrew Cagney  <ac131313@redhat.com>
7233
7234         * gdbint.texinfo: Include fdl.texi.
7235         (Top): Add GNU Free Documentation License.
7236         * Makefile.in (SFILES_INCLUDED): Add gpl.texi.
7237         (gdbint.dvi, gdbint.pdf, gdbint.info): Add dependency on fdl.texi.
7238         (gdbint_toc.html): Add dependency on gdb-cfg.texi and fdl.texi.
7239         (gdbint.info): Add srcdir to include path.
7240         * gdb.texinfo: Include gpl.texi.
7241         (Top): Add Copying.
7242         * gpl.texi: New file.
7243
7244 2002-02-23  Andrew Cagney  <ac131313@redhat.com>
7245
7246         * gdbint.texinfo (Debugging GDB): Remove references to cygnus.com.
7247
7248 2002-02-19  Pierre Muller  <muller@ics.u-strasbg.fr>
7249
7250         * gdb.texinfo: Document Cygwin native specific commands.
7251
7252 2002-02-15  Daniel Jacobowitz  <drow@mvista.com>
7253
7254         * gdb.texinfo: Document gdbserver ``--attach'' command.
7255
7256 2002-02-07  Michael Snyder  <msnyder@redhat.com>
7257
7258         * gdb.texinfo (overlays): Change @var(_ovly_debug_event)
7259         to @code(_ovly_debug_event).
7260
7261 2002-02-07  Andrew Cagney  <ac131313@redhat.com>
7262
7263         * gdb.texinfo (How Overlays Work): Shrink the overlay diagram.
7264
7265 2002-02-06  Michael Snyder  <msnyder@redhat.com>
7266
7267         * gdb.texinfo (overlays): Mention new magic symbol
7268         '_ovly_debug_event', which allows GDB to keep better track
7269         of overlays.
7270
7271 2002-02-03  Eli Zaretskii  <eliz@gnu.org>
7272
7273         * gdb.texinfo (Memory Region Attributes): Fix the wording.
7274         Suggested by Dmitry Sivachenko.
7275
7276         * (<many nodes>): Fix the spelling and punctuation of "i.e.".
7277
7278 2002-02-01  Michael Snyder  <msnyder@redhat.com>
7279
7280         * gdb.texinfo (set trust-readonly): Change value{gdbn} to value{GDBN}.
7281
7282 2002-01-30  Michael Snyder  <msnyder@redhat.com>
7283
7284         * gdb.texinfo: (remote protocol): Gramatical fix-up.
7285         (set trust-readonly-sections): Document.
7286
7287 2002-01-29  Andrew Cagney  <ac131313@redhat.com>
7288
7289         * gdbint.texinfo (Releasing GDB): Revise and update.
7290
7291 2002-01-28  Andrew Cagney  <ac131313@redhat.com>
7292
7293         * gdbint.texinfo (Target Architecture Definition): Delete
7294         description of TARGET_BYTE_ORDER_DEFAULT.
7295
7296 2002-01-27  Eli Zaretskii  <eliz@gnu.org>
7297
7298         * gdb.texinfo: Fix typos and markup.  From Dmitry Sivachenko
7299         <mitya@cavia.pp.ru>.
7300
7301 2002-01-23  Andrew Cagney  <ac131313@redhat.com>
7302
7303         * libgdb.texinfo: Delete file.
7304
7305 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
7306
7307         * gdb.texinfo: Remove makeinfo 3.12 hacks.
7308         * gdbint.texinfo: Ditto.
7309
7310 Tue Jan 22 11:57:38 2002  Andrew Cagney  <cagney@redhat.com>
7311
7312         * gdb.texinfo: Fix typo ``Remove' -> ``Remote''.
7313
7314 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
7315
7316         * Makefile.in: Update copyright.
7317         (TEXI2DVI): Define.
7318         (gdb.dvi, gdb.pdf, stabs.dvi, stabs.pdf): Use TEXI2DVI.
7319         (gdbint.dvi, gdbint.pdf): Use TEXI2DVI.  Add dependency on
7320         gdb-cfg.texi.
7321         (TEXINDEX, PDFTEX): Delete makefile variables.
7322
7323 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
7324
7325         * gdb.texinfo (Protocol): Move section to appendix.
7326
7327 2002-01-21  Andrew Cagney  <ac131313@redhat.com>
7328
7329         * gdb.texinfo (Remote Debugging): Create a menu.
7330         (Top): Add ``Remote Debugging'' to menu.
7331
7332 2002-01-21  Andrew Cagney  <ac131313@redhat.com>
7333
7334         * gdb.texinfo (Remote): Move the sub-section ``The GDB remote
7335         serial protocol'' from here.
7336         (Remote Debugging): To here.  New chapter.
7337
7338 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
7339
7340         * gdbint.texinfo (Target Architecture Definition): Delete
7341         description of TARGET_BYTE_ORDER_SELECTABLE_P.
7342
7343 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
7344
7345         * gdbint.texinfo (Host Definition): Revise.  xm-xyz.h and xyz.mh
7346         are no longer needed.
7347         (Porting GDB): Add maintainer note about configure.host.
7348
7349 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
7350
7351         * gdbint.texinfo (Target Architecture Definition): Remove
7352         definition of IEEE_FLOAT.
7353
7354 2002-01-20  Eli Zaretskii  <eliz@gnu.org>
7355
7356         * gdb.texinfo: Beautify copyright years; fix a typo.
7357         (DJGPP Native): Fix overfull hboxes in examples.  From Brian Youmans
7358         <3diff@gnu.org>
7359
7360 2002-01-19  Andrew Cagney  <ac131313@redhat.com>
7361
7362         * gdbint.texinfo (Host Definition): Remove references to
7363         MALLOC_INCOMPATIBLE.
7364
7365 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
7366
7367         * gdbint.texinfo (Host Definition): Remove references to XDEPFILES
7368         and xyz-xdep.o.
7369
7370 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
7371
7372         * gdb.texinfo (Maintenance Commands): Add appendix.
7373         (Set Breaks): Copy ``maint info breakpoint'' doco to
7374         ``Maintenance Commands'' appendix.  Add reference.
7375
7376 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
7377
7378         * fdl.texi: Remove next/prev from @node.
7379
7380 2002-01-17  Eli Zaretskii  <eliz@gnu.org>
7381
7382         * gdb.texinfo: @include fdl.texi.  Fixes for overfull hboxes and
7383         for monstrous @multitable (from Brian Youmans).
7384
7385         * fdl.texi: New file.
7386
7387         * Makefile.in (SFILES_INCLUDED): Add fdl.texi.
7388
7389 2002-01-15  Andrew Cagney  <ac131313@redhat.com>
7390
7391         * gdbint.texinfo (Releasing GDB): New chapter.
7392
7393 2002-01-14  Andrew Cagney  <ac131313@redhat.com>
7394
7395         * gdb.texinfo (Embedded Processors, Calling program functions):
7396         Obsolete references to a29k.
7397
7398 2002-01-13  Andrew Cagney  <ac131313@redhat.com>
7399
7400         * gdbint.texinfo (Coding): Review Cleanups section.  Examples
7401         examples.  Document that a code-block should do or discard its
7402         cleanups before exit.
7403
7404 2002-01-11  Michael Snyder  <msnyder@redhat.com>
7405
7406         * gdb.texinfo (Choosing files): Change @samp to @file.
7407
7408 2002-01-05  Michael Snyder  <msnyder@redhat.com>
7409
7410         * gdb.texinfo (--pid): Document new command line option (attach).
7411
7412 2002-01-07  Eli Zaretskii  <eliz@gnu.org>
7413
7414         * gdb.texinfo (Tracepoints): Clarify that tracepoints need support
7415         in the stub.
7416
7417 2002-01-04  Andrew Cagney  <ac131313@redhat.com>
7418
7419         * gdbint.texinfo (Target Architecture Definition): Replace
7420         BIG_ENDIAN with BFD_ENDIAN_BIG.
7421
7422 2002-01-03  Andrew Cagney  <ac131313@redhat.com>
7423
7424         * gdbint.texinfo (Target Architecture Definition): Replace
7425         value_ptr with struct value pointer.
7426
7427 2002-01-02  Eli Zaretskii  <eliz@gnu.org>
7428
7429         * gdb.texinfo (Free Software): Fix wording.
7430
7431 2001-12-31  Eli Zaretskii  <eliz@gnu.org>
7432
7433         * gdb.texinfo (Free Software): New section ``Free Software Needs
7434         Free Documentation''.
7435
7436 2001-12-30  Eli Zaretskii  <eliz@gnu.org>
7437
7438         * stabs.texinfo:
7439         * gdb.texinfo:
7440         * gdbint.texinfo:
7441         * libgdb.texinfo:
7442         * annotate.texi: Fix the application of GFDL in the Copyright notice.
7443
7444 2001-12-29  Michael Snyder  <msnyder@redhat.com>
7445
7446         * gdb.texinfo (maint info sections): Fix typo.
7447
7448 2001-12-26  Michael Snyder  <msnyder@redhat.com>
7449
7450         * gdb.texinfo (maint info sections): Document.
7451
7452         * gdb.texinfo (info proc): Comment out documentation for
7453         'info proc' sub-options that are currently not implemented.
7454
7455 2001-12-20  Jim Blandy  <jimb@redhat.com>
7456
7457         * gdbint.texinfo (TARGET_CHAR_SIGNED): Document.
7458
7459 2001-12-15  Andrew Cagney  <ac131313@redhat.com>
7460
7461         * gdbint.texinfo (Target Architecture Definition): Replace
7462         LITTLE_ENDIAN with BFD_ENDIAN_LITTLE.
7463
7464 2001-12-01  Andrew Cagney  <ac131313@redhat.com>
7465
7466         * gdbint.texinfo (Host Definition): Delete documentation on
7467         HOST_BYTE_ORDER.
7468
7469 2001-11-30  Jim Blandy  <jimb@redhat.com>
7470
7471         * gdb.texinfo (Overlays): New chapter, documenting GDB's
7472         overlay support.  Add to top-level menu.
7473
7474 2001-11-26  Tom Tromey  <tromey@redhat.com>
7475
7476         * gdb.texinfo (Command Syntax): Document C-o binding.
7477
7478 2001-07-26  Christopher Faylor  <cgf@redhat.com>
7479
7480         * gdb.texinfo (Options): Eliminate attempt to explain .gdbinit/gdb.ini
7481         use since it is described in the referenced section.
7482
7483         From Eli Zaretskii <eliz@gnu.org>
7484         * gdb.texinfo (Command Files): Reword to make gdb.ini requirement
7485         clearer when using DJGPP.
7486
7487 2001-11-24  Christopher Faylor  <cgf@redhat.com>
7488
7489         * gdb.texinfo (File Options): Change description of -nx and gdb.ini to
7490         specifically refer to MS-DOS.
7491         (command files): Mention gdb.ini is only used on MS-DOS.
7492
7493 2001-11-21  Tom Tromey  <tromey@redhat.com>
7494
7495         * gdb.texinfo (Invoking GDB): Document --args.
7496         (Mode Options): Likewise.
7497
7498 2001-11-21  Jim Blandy  <jimb@redhat.com>
7499
7500         * gdbint.texinfo (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT):
7501         Delete documentation; this macro has been removed from the
7502         sources.
7503
7504 2001-11-13  Jim Blandy  <jimb@redhat.com>
7505
7506         * gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Clarify.
7507
7508 2001-11-06  Corinna Vinschen  <vinschen@redhat.com>
7509
7510         * gdb.texinfo (gdbarch_in_function_epilogue_p): Add documentation.
7511
7512 2001-11-05  Michael Snyder  <msnyder@redhat.com>
7513
7514         * gdb.texinfo (info functions): Document use of backslash to
7515         quote regexp chars in function names such as "operator*()".
7516
7517 2001-11-01  Fred Fish  <fnf@redhat.com>
7518
7519         * gdbint.texinfo (SOLIB_ADD): Document additional new
7520         "readsyms" arg.
7521
7522 2001-10-30  Don Howard  <dhoward@redhat.com>
7523
7524         * gdb.texinfo: (Command Files) Added documentation for the
7525         behavior of gdb with input redirected from a file.
7526
7527 2001-10-28  Fred Fish  <fnf@redhat.com>
7528
7529         * gdb.texinfo (auto-solib-add): Change docs to match
7530         implementation change.
7531         (auto-solib-limit): Add docs for new variable.
7532
7533 2001-10-15  Andrew Cagney  <ac131313@redhat.com>
7534
7535         * gdbint.texinfo (Target Architecture Definition): Function
7536         value_as_pointer renamed to value_as_address.
7537
7538 2001-10-15  Andrew Cagney  <ac131313@redhat.com>
7539
7540         * gdbint.texinfo (Target Architecture Definition): Default
7541         POINTER_TO_ADDRESS functions assume unsigned addresses.
7542         (INTEGER_TO_ADDRESS): Document.  Derive pragmatics section from a
7543         posting by Jim Blandy.
7544
7545 2001-10-12  Jim Blandy  <jimb@redhat.com>
7546
7547         * Makefile.in (MAKEHTMLFLAGS): Remove -glossary; the most recent
7548         version of texi2html (1.64) doesn't support this flag any more.
7549
7550 2001-09-08  Mark Kettenis  <kettenis@gnu.org>
7551
7552         * gdbint.texinfo (Host Definition): Remove description of
7553         MEM_FNS_DECLARED.
7554
7555         * gdbint.texinfo (Host Definition): Remove description of R_OK.
7556
7557         * gdbint.texinfo (Host Definition): Remove description of
7558         HAVE_SIGSETMASK.
7559
7560 2001-09-04  Elena Zannoni  <ezannoni@redhat.com>
7561
7562         * gdbint.texinfo (Target Architecture Definition): Add
7563         explanation of TARGET_PRINT_INSN macro.
7564
7565 2001-08-30  Jim Blandy  <jimb@redhat.com>
7566
7567         * gdb.texinfo (`add-symbol-file'): Correct synopsis.
7568         Explain what it means to load relocatable files.
7569
7570 2001-08-28  Jim Blandy  <jimb@redhat.com>
7571
7572         * gdbint.texinfo: Bring the HTML `top' menu into sync with the
7573         info `top' menu.
7574
7575 Wed Aug 15 10:47:28 2001  Christopher Faylor <cgf@cygnus.com>
7576
7577         * gdbint.texinfo: Add a cautionary note about macro use.
7578
7579 2001-08-02  Corinna Vinschen  <vinschen@redhat.com>
7580
7581         * gdb.texinfo: Explain omitting the hostname in the
7582         `target remote' command.
7583
7584 2001-07-30  Daniel Jacobowitz  <drow@mvista.com>
7585
7586         * gdbint.texinfo: Remove extraneous START-INFO-DIR-ENTRY
7587         and END-INFO-DIR-ENTRY.
7588
7589 2001-07-28  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
7590
7591         * gdb.texinfo (TUI Configuration): Rename tui configuration variables.
7592
7593 2001-07-25  Andrew Cagney  <ac131313@redhat.com>
7594
7595         * gdbint.texinfo (libgdb): Rewrite.
7596
7597 2001-07-26  Eli Zaretskii  <eliz@gnu.org>
7598
7599         * Makefile.in (gdbgui.dvi, gdb-gui, gdbgui.info): Targets deleted.
7600
7601 2001-07-24  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
7602
7603         * gdb.texinfo (TUI): New chapter, document the TUI.
7604         (Mode Options): Document the -tui option.
7605
7606 2001-07-23  Mark Kettenis  <kettenis@gnu.org>
7607
7608         * gdbint.texinfo (Host Definition): Remove description of
7609         NEED_POSIX_SETPGID.
7610
7611 2001-07-23  Eli Zaretskii  <eliz@gnu.org>
7612
7613         * gdb.tex (DJGPP Native): New node, with descriptions of
7614         DJGPP-specific commands.
7615
7616 2001-07-19  John R. Moore  <jmoore@redhat.com>
7617
7618         * gdbint.texinfo: Three misspellings.
7619
7620 2001-07-06  Andrew Cagney  <ac131313@redhat.com>
7621
7622         * Makefile.in (refcard.dvi): Rewrite to avoid problems with empty
7623         `test` expressions on bash.  Problem reported by Colin Walters.
7624
7625 2001-07-04  Andrew Cagney  <ac131313@redhat.com>
7626
7627         * gdbint.texinfo (User Interface): Update ui-out documentation to
7628         refelect recent UI/MI updates.
7629
7630 2001-07-04  Andrew Cagney  <ac131313@redhat.com>
7631
7632         * gdb.texinfo (Mode Options): Mention the mi0 and mi1
7633         interpreters.
7634
7635 2001-06-15  Andrew Cagney  <ac131313@redhat.com>
7636
7637         * gdbint.texinfo (Target Architecture Definition): GDBARCH is a C
7638         structure and not macros.
7639         (Host Definition): Document that much of this chapter is obsolete.
7640         (Target Architecture Definition): Update list of files that make
7641         up a target architecture.
7642         (Coding): Update.
7643
7644 2001-06-28  Andrew Cagney  <ac131313@redhat.com>
7645
7646         * gdbint.texinfo (Target Architecture Definition): Update
7647         EXTRACT_STRUCT_VALUE_ADDRESS and EXTRACT_STRUCT_VALUE_ADDRESS_P.
7648         The latter has been changed to a true predicate.
7649
7650 2001-06-17  Eli Zaretskii  <eliz@gnu.org>
7651
7652         * annotate.texi: Add @noindent where needed.  From Dmitry
7653         Sivachenko <dima@Chg.RU>.
7654         * gdb.texinfo: Indexing fix.  From Dmitry Sivachenko.
7655
7656 2001-06-16  Andrew Cagney  <ac131313@redhat.com>
7657
7658         * gdb.texinfo (Protocol): Fix typo.  Extra parenthesis.
7659
7660 2001-06-14  Andrew Cagney  <ac131313@redhat.com>
7661
7662         * gdb.texinfo (Remote Protocol): Document that the ``!'' packet
7663         returns ``OK''.  Document that the ``R'' packet does not reply.
7664
7665 2001-06-13  Michael Snyder  <msnyder@redhat.com>
7666
7667         * gdb.texinfo (Protocol): Add doc for new packet "qSymbol:".
7668
7669 2001-06-13  Eli Zaretskii  <eliz@gnu.org>
7670
7671         * gdb.texinfo (Signals): Clarify the default setting of signal
7672         handling.
7673
7674 2001-05-14  Andrew Cagney  <ac131313@redhat.com>
7675
7676         * gdbint.texinfo (CLEAR_DEFERRED_STORES): Delete stray @item
7677         (FRAME_ARGS_ADDRESS_CORRECT): Ditto.
7678
7679 2001-05-12  Andrew Cagney  <ac131313@redhat.com>
7680
7681         * Makefile.in (GDBvn.texi): Set GDBVN from ../version.in.
7682
7683 2001-05-10  Eli Zaretskii  <eliz@gnu.org>
7684
7685         * gdbint.texinfo (Clean Design and Portable Implementation):
7686         Renamed from "Clean Design".
7687         (Clean Design and Portable Implementation): Document portable
7688         methods of handling file names, and the associated macros.
7689
7690 2001-04-02  Eli Zaretskii  <eliz@gnu.org>
7691
7692         * gdb.texinfo (Tracepoint Actions): Mention the "info scope"
7693         command and provide a cross-reference to its description.
7694         (Symbols): Note that "info scope" is useful for trace experiments.
7695
7696 2001-04-01  Eli Zaretskii  <eliz@gnu.org>
7697
7698         * gdb.texinfo (Symbols): Document "info scope".
7699         (Tracepoints): New chapter.
7700         (Contributors): Update for v5.1.
7701         <All nodes>: Change "C++" to "C@t{++}".
7702
7703         * gdbint.texinfo (User Interface): A new section about ui_out
7704         functions, based on text written by Fernando Nasser.
7705
7706         * stabs.texinfo: Change Permissions to GFDL.  Update Copyright.
7707
7708 2001-03-26  Eli Zaretskii  <eliz@gnu.org>
7709
7710         * gdb.texinfo: Change Permissions to GFDL.  Update Copyright.
7711
7712         * gdbint.texinfo: Change Permissions to GFDL.  Update Copyright.
7713
7714         * gdbgui.texinfo: Change Permissions to GFDL.  Update Copyright.
7715         Replace "GDB" with "@value{GDBN}".  Fix markup.
7716
7717         * annotate.texi: Change Permissions to GFDL.  Update Copyright.
7718
7719         * gdb.texinfo (Output Formats): Mention "info symbol" and provide
7720         a cross-reference to its description.
7721         (Symbols): Document "info symbol".
7722
7723 2001-03-21  Eli Zaretskii  <eliz@gnu.org>
7724
7725         * gdbint.texinfo (Algorithms): New section "Watchpoints" and new
7726         subsection "x86 Watchpoints".
7727         (Target Architecture Definition): Document the macros
7728         I386_USE_GENERIC_WATCHPOINTS and TARGET_HAS_HARDWARE_WATCHPOINTS.
7729         (Native Debugging): Document I386_USE_GENERIC_WATCHPOINTS.
7730
7731 2001-03-20  Andrew Cagney  <ac131313@redhat.com>
7732
7733         * gdbint.texinfo (Target Architecture Definition): Update
7734         definition of SOFTWARE_SINGLE_STEP_P to include empty parameter
7735         list.
7736
7737 2001-03-06  Kevin Buettner  <kevinb@redhat.com>
7738
7739         * Makefile.in, all-cfg.texi, annotate.texi, gdb.texinfo,
7740         gdbint.texinfo, refcard.tex: Update/correct copyright notices.
7741
7742 2001-02-21  Eli Zaretskii  <eliz@gnu.org>
7743
7744         * gdb.texinfo (Signals): Document "ignore", "noignore", and "all".
7745
7746 2001-02-11  Eli Zaretskii  <eliz@gnu.org>
7747
7748         * gdb.texinfo (Environment): Document that `path' does not change
7749         the value of PATH in GDB's own environment (it did in the past,
7750         but that was changed on March 15, 1994).  Reported by Doug Evans
7751         <dje@transmeta.com>.
7752
7753         * gdbint.texinfo: Fix up @itemize lists so that @item is alone on
7754         its line.  Fix markup of commands and macros.  Add an Index node
7755         and index entries.
7756
7757 2001-01-23  J.T. Conklin  <jtc@redback.com>
7758
7759         * gdb.texinfo (Memory region attributes): New manual section.
7760
7761 2001-01-04  Nicholas Duffek  <nsd@redhat.com>
7762
7763         * gdbint.texinfo (POP_FRAME): Document use by return_command.
7764
7765 2000-12-25  Eli Zaretskii  <eliz@gnu.org>
7766
7767         * refcard.tex: Version and copyright fixed.  From Phil Edwards
7768         <pedwards@disaster.jaj.com>.
7769
7770 Thu Nov 30 16:57:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7771
7772         * gdbint.texinfo (ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM,
7773         DWARF2_REG_TO_REGNUM): Document.
7774
7775 Mon Nov 20 21:29:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7776
7777         * gdbint.texinfo (Coding): Update current value of
7778         --enable-build-warnings.  Mention --enable-gdb-build-warnings.
7779
7780 2000-11-19  Eli Zaretskii  <eliz@gnu.org>
7781
7782         * gdb.texinfo (Continuing and Stepping):  Fixed markup and typos,
7783         as suggested by Dmitry Sivachenko <dima@Chg.RU>.
7784
7785 2000-11-10  Christopher Faylor <cgf@cygnus.com>
7786
7787         * gdb.texinfo: Document new 'set step-mode' command.
7788
7789 2000-10-16  Eli Zaretskii  <eliz@gnu.org>
7790
7791         * gdb.texinfo (Contributors, MIPS Embedded): Minor spelling
7792         changes from Dmitry Sivachenko <dima@Chg.RU>.
7793
7794 2000-09-26  Eli Zaretskii  <eliz@gnu.org>
7795
7796         * gdb.texinfo (Hooks): Document the new post-hook functionality.
7797         From Steven Johnson <sbjohnson@ozemail.com.au>.
7798
7799 2000-08-10  Mark Kettenis  <kettenis@gnu.org>
7800
7801         * gdbint.texinfo (Overall Structure): Spelling fix.
7802
7803 2000-08-10  Eli Zaretskii  <eliz@gnu.org>
7804
7805         * gdbint.texinfo (Target Architecture Definition): Document that
7806         REGISTER_CONVERT_TO_VIRTUAL should only be called on a register
7807         for which REGISTER_CONVERTIBLE returns a zero value.
7808
7809 2000-07-08  Christopher Faylor <cgf@cygnus.com>
7810
7811         * Makefile.in (install-info): Find files to install in either the
7812         build or source directories (adapted from Makefile.am).
7813
7814 2000-07-07  Nicholas Duffek  <nsd@redhat.com>
7815
7816         * stabs.texinfo: Fix spelling errors.
7817         (String Field): FILE-NUMBER starts from 0, not 1.
7818
7819 2000-07-05  Eli Zaretskii <eliz@gnu.org>
7820
7821         * refcard.tex: Remove \centerline from the blurb.  Patch from
7822         Brian Youmans.
7823
7824 2000-06-25  Eli Zaretskii <eliz@gnu.org>
7825
7826         * Makefile.in (install-info): Support installation from outside of
7827         the source directory.  Reported by Mark Harig
7828         <markh@frazier.landmark.com>.
7829
7830 2000-06-20  J.T. Conklin  <jtc@redback.com>
7831
7832         * gdb.texinfo: Fix typo, $bpnum is set to last breakpoint number.
7833
7834 Fri May 26 15:55:33 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7835
7836         * Makefile.in (pdf, gdbint.pdf, gdb.pdf, stabs.pdf): New targets.
7837         Generate using pdftex.
7838         (PDFTEX): Define.
7839         (STAGESTUFF, maintainer-clean realclean): Add *.pdf.
7840         (gdb.texinfo, gdbint.texinfo, stabs.texinfo): When TeX insert the
7841         @contents at the start.
7842
7843 2000-05-24  Eli Zaretskii  <eliz@gnu.org>
7844
7845         * gdb.texinfo: Remove duplicate @syncodeindex.  From Brian
7846         Youmans.
7847
7848 Wed May 24 21:27:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7849
7850         From Brian Youmans:
7851         * gdb.texinfo: Fix ``et al.''.
7852
7853 Tue May 23 22:57:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7854
7855         * Makefile.in (refcard.dvi): Remove quotes around REFEDITS in for
7856         loop.
7857
7858 2000-05-19  Jimmy Guo  <guo@cup.hp.com>
7859
7860         * configure: Regenerate.
7861
7862 2000-05-17  Eli Zaretskii  <eliz@gnu.org>
7863
7864         * Makefile.in (install-info): Run install-info on installed Info
7865         files.
7866
7867 Fri May 12 20:18:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7868
7869         * gdb.texinfo: Add Stan Shebs, et.al. as authors.  Mention
7870         Andrew Cagney.
7871
7872 2000-05-09  Eli Zaretskii  <eliz@gnu.org>
7873
7874         * gdb.texinfo: Proofreading changes from Brian Youmans.
7875
7876 2000-05-01  Nick Duffek  <nsd@cygnus.com>
7877
7878         * gdb.texinfo (Command Files): Mention -x, use @enumerate for
7879         startup sequence, minor edits.
7880
7881 2000-05-01  Eli Zaretskii  <eliz@gnu.org>
7882
7883         * annotate.texi: Remove "@syncodeindex fn cp", it causes grief in
7884         TeX.
7885
7886         * gdb.texinfo: Add "@syncodeindex fn cp".  Convert all entries
7887         "@kindex f" into "@kindex f (foo)", otherwise we get index entries
7888         like `n' and `s' which look weird.  Convert some of the @kindex to
7889         @vindex, when they refer to variables, not commands.
7890
7891 Sat Apr 29 17:01:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7892
7893         * gdbint.texinfo (Hints): Do not use @value{GDBN in @nodes.
7894
7895 2000-04-23  Eli Zaretskii  <eliz@gnu.org>
7896
7897         * Makefile.in (GDBMI_DIR): New variable.
7898         (SET_TEXINPUTS): Add $(GDBMI_DIR).
7899         (SFILES_DOC): Add $(GDBMI_DIR)/gdbmi.texinfo.
7900         (gdbmi.texinfo): New target, for texi2roff.
7901         (gdb.me, gdb.ms, gdb.mm): Depend on gdbmi.texinfo.
7902         (gdb.info, gdb_toc.html): Add "-I ${GDBMI_DIR}".
7903
7904         * gdb.texinfo (Top): Add GDB/MI to the main menu and @include
7905         gdbmi.texinfo.
7906         (Mode Options): Add xref to GDB/MI docs and remove a FIXME
7907         comment.
7908
7909 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
7910
7911         * gdb.texinfo (Files): Update description of add-symbol-file
7912         command.
7913
7914 2000-04-17  Eli Zaretskii  <eliz@gnu.org>
7915
7916         * gdb.texinfo (Porting GDB): Don't use @value in the node name, it
7917         prevents the build (and is generally a Bad Idea).
7918
7919 2000-04-17  Eli Zaretskii  <eliz@gnu.org>
7920
7921         * gdb.texinfo (Protocol): Prevent makeinfo from complaining about
7922         a comma inside @var.
7923         (Command Files): Index markup changes from Dmitry Sivachenko
7924         <dima@Chg.RU>.
7925
7926 2000-04-16  Eli Zaretskii  <eliz@gnu.org>
7927
7928         * Makefile.in (LN_S): Define.
7929         (gdb-cfg.texi, gdb.dvi, links2roff, inc-hist.texinfo): Don't
7930         invoke "ln -s" unless it is known to work.
7931
7932         * configure.in (AC_PROG_LN_S): Add.
7933
7934 2000-04-14  Jim Blandy  <jimb@redhat.com>
7935
7936         * gdbint.texinfo (Pointers Are Not Always Addresses): New manual
7937         section.
7938         (Target Conditionals): Document ADDRESS_TO_POINTER,
7939         POINTER_TO_ADDRESS.
7940
7941 2000-04-11  Daniel Berlin  <dan@cgsoftware.com>
7942
7943         * gdbint.texinfo: Replaced GDB with @value{GDBN}, @include
7944         gdb-cfg.texi to get the value.
7945
7946 2000-04-10  Jim Blandy  <jimb@redhat.com>
7947
7948         * gdbint.texinfo (Target Architecture Definition): Fix
7949         cross-references.
7950
7951 2000-04-08  Jim Blandy  <jimb@redhat.com>
7952
7953         * gdbint.texinfo (Using Different Register and Memory Data
7954         Representations): New section.
7955         (REGISTER_CONVERTIBLE, REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE,
7956         REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_VIRTUAL,
7957         REGISTER_CONVERT_TO_RAW): Document.
7958
7959 Mon Apr  3 19:16:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7960
7961         * gdb.texinfo (Protocol): Deprecate the sequence-id.  Add cindex
7962         for acknowledgments.
7963
7964 Tue Mar 28 18:28:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7965
7966         * gdb.texinfo (Protocol): Replace ``qfThreadExtraInfo'' with
7967         qThreadExtraInfo.
7968
7969 2000-03-28  J.T. Conklin  <jtc@redback.com>
7970
7971         * gdb.texinfo: Clarify which remote debug protocol commands are
7972         required and which are optional.
7973
7974 Tue Mar 28 16:06:22 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7975
7976         * gdb.texinfo: Revert remainder of Fri Mar 24 18:06:34 2000 Andrew
7977         Cagney <cagney@b1.cygnus.com>.  Move @chapter and @node entries
7978         back to annotate.texi, rluser.texinfo and inc-hist.texinfo.
7979         * annotate.texi: Update.
7980
7981 2000-03-28  Stan Shebs  <shebs@apple.com>
7982
7983         * gdb.texinfo: Update dates, bump to Eighth Edition (note
7984         expectation of additional changes before release), update
7985         ISBN, add copy of top-level menu for @ifhtml, remove explicit
7986         node links, rephrase and/or shorten lines to fix formatting
7987         problem in both regular and @smallbook formats.
7988         * annotate.texi: Shorten lines in example, use smallexample
7989         consistently everywhere.
7990         * Makefile.in: Add comment about texinfo 4.0 html generation.
7991         (SFILES_INCLUDED): Add annotate.texi.
7992
7993 2000-03-27  Daniel Berlin  <dan@cgsoftware.com>
7994
7995         * gdb.texinfo (Debugging Output): Added new section, documenting
7996         the "set/show debug" commands.
7997
7998 Fri Mar 24 18:06:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
7999
8000         * annotate.texi (Annotations): When GDBN omit @chapter and @node
8001         entry.
8002
8003         * gdb.texinfo: Check for @ifinfo instead of @ifnottex.
8004         (rluser.texinfo, inc-hist.texinfo, annotate.texi): Add local
8005         @chapter and @node entries.
8006
8007         * gdb.texinfo: Link all top-level nodes.
8008
8009 Fri Mar 24 17:56:48 2000  Andrew Cagney  <cagney@b1.cygnus.com>
8010
8011         * Makefile.in (install-info): Create $(infodir) before installing
8012         files.
8013
8014 2000-03-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>
8015
8016         From David Whedon <dwhedon@gordian.com>
8017         * gdbint.texinfo : Added paragraphs about command deprecation.
8018
8019 2000-03-22  Daniel Berlin  <dan@cgsoftware.com>
8020
8021       * gdb.texinfo: Add documentation for the apropos command.
8022
8023 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
8024
8025         * gdb.texinfo: Add new queries ThreadInfo and ThreadExtraInfo.
8026
8027 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
8028
8029         * gdb.texinfo: Add white space to prevent overprinting in
8030         two places.
8031
8032 2000-03-17  Stan Shebs  <shebs@apple.com>
8033
8034         * gdb.texinfo: Many minor changes from Dmitry Sivachenko
8035         <dima@Chg.RU>, also clarification of allowed content for
8036         string constants.
8037
8038 2000-03-16  Eli Zaretskii <eliz@gnu.org>
8039
8040         * gdb.texinfo (main menu): Add Annotations.
8041         (File Options): Add @cindex entries for each command-line option.
8042         Document --epoch, --annotate, --async, --interpreter, --write,
8043         --statistics, and --version.
8044
8045         * annotate.texi: Convert to a chapter.  Use @value{GDBN} instead
8046         of GDB.
8047
8048 2000-02-23  Jim Blandy  <jimb@redhat.com>
8049
8050         * gdbint.texinfo (FUNCTION_START_OFFSET): Document.
8051
8052 2000-02-22  Jim Blandy  <jimb@redhat.com>
8053
8054         * gdbint.texinfo: Document COERCE_FLOAT_TO_DOUBLE --- the new form.
8055
8056 2000-02-15  Jason Molenda  (jsm@bugshack.cygnus.com)
8057
8058         * Makefile.in (diststuff): New target.
8059
8060 2000-02-15  Kevin Buettner  <kevinb@redhat.com>
8061
8062         * agentexpr.texi: Fix wording regarding Intel's IA-64
8063         architecture.  [From Jim Wilson.]
8064
8065 2000-01-16  Tom Tromey  <tromey@cygnus.com>
8066
8067         * gdb.texinfo (Breakpoints): Mention breakpoint ranges.
8068         (Delete Breaks): Mention range arguments.
8069         (Disabling): Likewise.
8070
8071 2000-01-05  Dmitry Sivachenko <dima@Chg.RU>
8072
8073         * gdb.texinfo:  Wrap "ASCII" in @sc{}; clarify a few sentences.
8074
8075 Wed Dec  8 19:53:08 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8076
8077         * gdbint.texinfo (FRAME_CHAIN_VALID): Add the generic frame-chain
8078         valid functions.
8079
8080 1999-11-05  Stan Shebs  <shebs@andros.cygnus.com>
8081
8082         * gdb.texinfo: Clarify regular expressions used in rbreak.
8083
8084 1999-10-15  Kevin Buettner  <kevinb@cygnus.com>
8085
8086         * gdbint.texinfo (MEMORY_INSERT_BREAKPOINT,
8087         MEMORY_REMOVE_BREAKPOINT):  Document.
8088
8089 Thu Oct 14 21:17:17 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8090
8091         * gdb.texinfo (remote): Document how GDB ignores the qOffsets BSS
8092         offset re-using the DATA offset instead.
8093
8094 1999-10-11  Jim Kingdon  <kingdon@redhat.com>
8095
8096         * gdbint.texinfo (Target Architecture Definition): Add PARM_BOUNDARY.
8097
8098 1999-10-05  Stan Shebs  <shebs@andros.cygnus.com>
8099
8100         From Dmitry Sivachenko <demon@gpad.ac.ru>:
8101         * gdb.texinfo: Use GDBP and GDBN everywhere, fix a couple other
8102         typos.
8103
8104         * gdb.texinfo: Various minor wording and formatting improvements,
8105         mentions of additional command-line options.
8106
8107 1999-09-30  Fred Fish  <fnf@cygnus.com>
8108
8109         * gdb.texinfo:  Document additional forms of specifying section
8110         names and addresses for the add-symbol-file command.
8111
8112 1999-09-14  Michael Snyder  <msnyder@cleaver.cygnus.com>
8113
8114         * gdbint.texinfo: Fix typo, add the word "have".
8115
8116 1999-09-14  Jim Blandy  <jimb@cris.red-bean.com>
8117
8118         * gdbint.texinfo (Target Architecture Definition): Document the
8119         SKIP_PERMANENT_BREAKPOINT macro.
8120
8121 1999-09-07  Stan Shebs  <shebs@andros.cygnus.com>
8122
8123         * gdb.texinfo: Fiks speling errers.
8124
8125         * gdb.texinfo: Fix uses of @multitable.
8126
8127         From Eli Zaretskii  <eliz@gnu.org>:
8128         * gdb.texinfo: Include details specific to DOS host, clarify
8129         some confusing language, fix @ref/@xref/@pxref usages, add
8130         comments about using with optimization, add more indexing,
8131         fix info about disassembly-flavor.
8132
8133 Tue Sep  7 09:11:24 1999  Kevin Buettner  <kevinb@cygnus.com>
8134
8135         * gdbint.texinfo (IN_SOLIB_DYNSYM_RESOLVE_CODE,
8136         SKIP_SOLIB_RESOLVER): Define.
8137
8138 Fri Sep  3 18:05:14 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8139
8140         * gdb.texinfo (Protocol): Review.  Add tables describing ``q'' and
8141         ``g'' packets.
8142
8143 1999-08-30  Stan Shebs  <shebs@andros.cygnus.com>
8144
8145         * gdb.texinfo: Create a new "Configurations" chapter with
8146         platform-specific info, inline remote.texi and move sections of it
8147         into the new chapter, move bits about info proc, heuristic search,
8148         and register stack into the new chapter.
8149         * remote.texi: Remove, now part of gdb.texinfo.
8150         * Makefile.in (SFILES_INCLUDED): Remove ref to remote.texi.
8151
8152 1999-08-27  Jason Molenda  (jsm@bugshack.cygnus.com)
8153
8154         * gdbint.texinfo (GDB_TARGET_IS_SUN3, GDB_TARGET_IS_SUN386,
8155         GDB_TARGET_IS_MACH386): These kludges have gone away.
8156
8157 Wed Aug 25 10:47:03 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8158
8159         * gdbint.texinfo (Target Architecture Definition): Mention
8160         TDEPLIBS.
8161
8162 1999-08-20  Stan Shebs  <shebs@andros.cygnus.com>
8163
8164         * gdb.texinfo: Remove remaining "HPPA" conditionals, rewrite
8165         surrounding text to fit HP-UX bits into general info.
8166         (HPPA-cfg.texi): Remove, no longer useful.
8167
8168         * gdb.texinfo: Remove explicit links from @node lines, remove
8169         HP-added "Detailed Node Listing" from main menu which confuses
8170         things.
8171
8172         From Dmitry Sivachenko <dima@Chg.RU>:
8173         * gdb.texinfo: Use @value{GDBN} instead of plain GDB, fix grouping
8174         in description of `set environment'.
8175
8176 1999-08-17  Stan Shebs  <shebs@andros.cygnus.com>
8177
8178         * gdbint.texinfo: Update coding standard to allow pure ANSI/ISO C.
8179
8180 1999-08-12  Ben Elliston  <bje@cygnus.com>
8181
8182         * gdbint.texinfo (Breakpoint Handling): Add missing words.
8183
8184 1999-08-10  Eli Zaretskii  <eliz@gnu.org>
8185
8186         * gdb.texinfo (Set Watchpoints): Explain some subtleties about
8187         watch, awatch, and rwatch.  Explain why the latter two cannot be
8188         set as software watchpoints.  Document that watchpoints for local
8189         variables are deleted when the debuggee terminates.
8190
8191 Wed Aug 11 13:18:14 1999  Andrew Cagney  <cagney@amy.cygnus.com>
8192
8193         * remote.texi (Protocol): Further clarification of the "qRcmd"
8194         packet.  Allow E.. response packet.  "qRcmd" packet is no longer
8195         reserved.
8196
8197 1999-08-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
8198
8199         * Makefile.in: Rename inc-hist.texi to inc-hist.texinfo.
8200         * gdb.texinfo: Ditto.
8201
8202 1999-08-06  Tom Tromey  <tromey@cygnus.com>
8203
8204         * gdb.texinfo (KOD): New node.
8205
8206 Fri Aug  6 17:05:48 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8207
8208         * remote.texi (Rcmd): Fix minor formatting typos.
8209
8210 Thu Aug  5 17:57:41 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8211
8212         * remote.texi (protocol qRcmd): Allow ``OK'' and ``O...'' response
8213         packets.
8214
8215 1999-07-14  Jim Blandy  <jimb@zwingli.cygnus.com>
8216
8217         * gdbint.texinfo (PREPARE_TO_PROCEED, ADDR_BITS_REMOVE): Doc
8218         fixes.
8219
8220 Tue Jun 29 11:43:55 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8221
8222         * gdbint.texinfo (SAVE_DUMMY_FRAME_TOS): Define.
8223
8224 Fri Jun 25 11:47:06 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8225
8226         * remote.texi (Communication Protocol): ``v'' is in use. Fix
8227         numerous formatting errors.  Clarify ``i''.  Mark ``i'', ``Z'',
8228         ``z'' and ``qRcmd'' as draft instead of reserved.  Identify
8229         packets that are not supported on all hosts. Expand examples.
8230         Spell check.
8231
8232 1999-06-24  Jason Molenda  (jsm@bugshack.cygnus.com)
8233
8234         * Makefile.in: Recognize html, install-html.  Add targets
8235         to build HTML versions of documentation via texi2html.
8236
8237 Thu Jun 24 15:59:03 1999  Stan Shebs  <shebs@andros.cygnus.com>
8238
8239         * gdbint.texinfo (Testsuite): New chapter, information about the
8240         testsuite.
8241
8242 Fri Jun 25 02:40:34 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8243
8244         * remote.texi (Communication Protocol): Rewrite.
8245
8246 Thu Jun 24 16:59:54 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8247
8248         * stabs.texinfo: Fix uses of xref.
8249
8250 Thu Jun 17 17:23:25 1999  Stan Shebs  <shebs@andros.cygnus.com>
8251
8252         * gdbint.texinfo: Add an anti-printf exhortation, and update the
8253         info about patch submission.
8254
8255 Mon Jun  7 15:49:40 1999  Stan Shebs  <shebs@andros.cygnus.com>
8256
8257         From Per Bothner  <bothner@cygnus.com>:
8258         * gdb.texinfo: Document Chill support.
8259
8260 Fri Jun  4 16:58:22 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8261
8262         * gdbint.texinfo (SP_REGNUM, FP_REGNUM, PC_REGNUM): Add reference
8263         to corresponding TARGET_READ_reg TARGET_WRITE_reg macros.
8264         Document that the value should be greater-than or equal-to zero.
8265         (NO_STD_REGS): Document. Deprecate.
8266
8267 Tue Jun  1 15:04:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8268
8269         * gdbint.texinfo (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):
8270         Document that these are not used.
8271
8272 Thu May 27 09:28:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8273
8274         * gdbint.texinfo (EXTRACT_STRUCT_VALUE_ADDRESS_P): Document.
8275
8276 Mon May 24 10:07:39 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8277
8278         * gdbint.texinfo (FRAME_NUM_ARGS): Update definition.  Parameter
8279         numargs was dropped.
8280
8281 Thu May 20 12:26:59 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8282
8283         * gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.
8284
8285 Tue Apr 27 19:14:20 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8286
8287         * gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
8288         Update.
8289
8290 Thu Apr 22 13:07:37 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8291
8292         * gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
8293         (GET_SAVED_REGISTER): Update, not just the a29k uses this.
8294
8295 Wed Apr 21 13:59:01 1999  Dave Brolley  <brolley@cygnus.com>
8296
8297         * gdbint.texinfo: Fix typos: $ -> @.
8298
8299 Tue Apr 20 11:59:38 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8300
8301         * gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
8302         LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
8303         BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
8304         BREAKPOINT_FROM_PC.
8305
8306 Mon Apr 12 16:00:44 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8307
8308         * gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
8309         CALL_DUMMY_STACK_ADJUST): Document.
8310
8311 Thu Apr  8 17:23:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
8312
8313         * gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
8314         SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.
8315
8316 1999-04-02  Stan Shebs  <shebs@andros.cygnus.com>
8317
8318         * gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
8319         longer exists.
8320
8321 Tue Mar  9 19:25:11 1999  Stan Shebs  <shebs@andros.cygnus.com>
8322
8323         * gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
8324         nearly all @ifset/@ifclear conditionals; nobody uses them, and
8325         they make the manual source incomprehensible.
8326         * h8-cfg.texi: Remove, hasn't been used in years.
8327
8328 Thu Feb 11 18:00:59 1999  Stan Shebs  <shebs@andros.cygnus.com>
8329
8330         * gdb.texinfo: Update the credits.
8331
8332 Mon Feb  8 17:33:57 1999  Stan Shebs  <shebs@andros.cygnus.com>
8333
8334         * gdb.texinfo: Fix mistakes noticed in printout of last
8335         draft, add Alpha to discussion of heuristic fence post.
8336
8337 Fri Feb  5 17:20:00 1999  Stan Shebs  <shebs@andros.cygnus.com>
8338
8339         * gdb.texinfo, remote.texi: Many changes; update to Seventh
8340         Edition, merge some HP changes into mainline, describe some
8341         previously undocumented features, describe more of the target
8342         commands available, eliminate obsolete section on renamed
8343         commands.
8344         * all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.
8345
8346 Wed Jan 20 17:47:45 1999  Stan Shebs  <shebs@andros.cygnus.com>
8347
8348         * gdb.texinfo: Make many HPPA conditionals unconditional,
8349         including catchpoint description, since now on for all configs.
8350         * all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
8351         specializations.
8352
8353 Thu Jan 14 17:10:12 1999  Stan Shebs  <shebs@andros.cygnus.com>
8354
8355         * Makefile.in (GDBvn.texi): Fix match expression to work with
8356         current format of VERSION in gdb/Makefile.in.
8357         * gdb.texinfo: Fix node ref to match new readline.
8358
8359 Wed Jan 13 10:38:40 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
8360
8361         * gdb.texinfo: Changes made as part of a project to merge in
8362           changes made by HP. Documentation makes extensive use of
8363           @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
8364           on remote debugging. There are differences in documentation
8365           (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
8366           the HP manual discusses catchpoints, hardware watchpoints, and
8367           some HPUX specific limitations for shared library support.
8368
8369           There are also a number of @node changes.
8370
8371 1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
8372
8373         * gdbint.texinfo (Formatting): Disambiguate a sentence.
8374         (C Usage): Same.
8375
8376 Wed Jan  6 11:55:34 1999  David Taylor  <taylor@texas.cygnus.com>
8377
8378         The following changes were made by Edith Epstein
8379         <eepstein@cygnus.com> as part of a project to merge in changes
8380         made by HP.
8381
8382         * HPPA-cfg.texi: new file.
8383
8384         * all-cfg.texi: set HPPA for HP PA-RISC targets.
8385
8386         * refcard.tex: change documentation about catch.
8387           removed info catch.
8388
8389 Mon Jan  4 18:29:18 1999  Stan Shebs  <shebs@andros.cygnus.com>
8390
8391         * gdbint.texinfo: Expand on GDB's coding standards,
8392         specify the use of arg names with prototypes.
8393
8394 1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
8395
8396         * gdb.texinfo: Fix tipo.
8397
8398 Sun Dec 13 10:27:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
8399
8400         * gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
8401         TARGET_BYTE_ORDER_SELECTABLE_P.
8402
8403 Thu Dec 10 16:07:09 1998  Andrew Cagney  <cagney@b1.cygnus.com>
8404
8405         * gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.
8406
8407 1998-12-09  Jim Blandy  <jimb@zwingli.cygnus.com>
8408
8409         * agentexpr.texi: New file.
8410
8411 Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>
8412
8413         * gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.
8414
8415 1998-12-03  J.T. Conklin  <jtc@redbacknetworks.com>
8416
8417         * remote.texi: Changed wording that implied that the GDB remote
8418         protocol caches register values instead of GDB itself.
8419
8420 Tue Dec  1 17:45:43 1998  Stan Shebs  <shebs@andros.cygnus.com>
8421
8422         * gdbint.texinfo: Add some info about symbol readers.
8423         (CHILL_PRODUCER, etc): Comment out descriptions, not useful.
8424         (IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
8425         (IN_SOLIB_RETURN_TRAMPOLINE): Describe.
8426         (KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
8427
8428 Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>
8429
8430         * gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE):
8431
8432 Sat Nov 28 13:45:53 1998  Andrew Cagney  <cagney@b1.cygnus.com>
8433
8434         * gdbint.texinfo (INNER_THAN): Update, now takes parameters.
8435
8436 Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>
8437
8438         * gdbint.texinfo (NO_SINGLE_STEP): Replace with
8439         SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.
8440
8441 Wed Oct 14 10:02:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
8442
8443         * gdbint.texinfo: Fix minor typos.
8444
8445 Wed Sep 30 18:03:19 1998  Stan Shebs  <shebs@andros.cygnus.com>
8446
8447         * gdbint.texinfo: Complete overhaul.  Group descriptions more
8448         logically, add more info on generic algorithms, remove much
8449         obsolete and/or wrong material.
8450
8451 Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <ian@cygnus.com>
8452
8453         * stabs.texinfo (Method Type Descriptor): Expand and correct.
8454
8455 Mon May  4 10:37:12 1998  Brian Youmans (3diff@gnu.org)
8456
8457         * refcard.tex:  Copyright, address updates.
8458
8459 Tue Apr 21 18:09:56 1998  Stan Shebs  <shebs@andros.cygnus.com>
8460
8461         * gdb.texinfo (EDITION, DATE): Update and change to use ordinals
8462         for the edition instead of confusing GDB-version-like numbers.
8463
8464 Mon Apr 13 14:05:00 1998  Fred Fish  <fnf@cygnus.com>
8465
8466         * gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".
8467
8468 Thu Apr  2 16:52:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
8469
8470         * LRS: Reformat a bit to keep text under 80 columns.
8471
8472 Thu Apr  2 16:10:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
8473
8474         * gdb.texinfo: Add some credits, mention bug monitor.
8475         * remote.texi: Mention mips monitor targets.
8476         * gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
8477
8478 Mon Feb  2 17:13:03 1998  Stan Shebs  <shebs@andros.cygnus.com>
8479
8480         * gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
8481         files, finish sorting of host vs target vs native macros, describe
8482         some more of them.
8483
8484 Tue Jan 13 16:44:50 1998  Fred Fish  <fnf@cygnus.com>
8485
8486         * gdbint.texinfo (Host Conditionals): Document change from
8487         using NO_MMALLOC to it's inverse, USE_MMALLOC.
8488
8489 Mon Nov 24 13:55:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
8490
8491         * gdbint.texinfo (Host Conditionals): Document
8492         PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.
8493
8494 Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <ian@cygnus.com>
8495
8496         * gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
8497         Document LSEEK_NOT_LINEAR.
8498
8499 Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <ian@cygnus.com>
8500
8501         * stabs.texinfo (Stab Section Basics): Make it clear that only
8502         some versions of the GNU linker remove the leading N_UNDF symbol.
8503
8504 Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <ian@cygnus.com>
8505
8506         * stabs.texinfo (String Field): Document type number pairs here,
8507         instead of in the Sun specific section.
8508         (Include Files): The GNU linker supports the N_BINCL
8509         optimization.  Clarify the N_BINCL value, and what it is used
8510         for.
8511         (Procedures): Document N_FUN with an empty string to mark the end
8512         of a function.
8513         (Typedefs): Mention that Sun compilers may use N_GSYM for a type.
8514         (Sun Differences): Remove this node, as the information is now
8515         elsewhere in the main document.
8516         (Stab Section Basics): Mention that the GNU linker may optimize
8517         stabs and remove the leading N_UNDF symbol.
8518
8519 Mon Dec  9 12:23:32 1996  Roland Pesch  <roland@wrs.com>
8520
8521         * gdb.texinfo, refcard.tex: Restore author credit
8522
8523 Wed Oct  2 22:01:36 1996  Fred Fish  <fnf@fishfood.ninemoons.com>
8524
8525         * gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
8526         documentation to account for START and END macros taking
8527         one arg.
8528
8529 Thu Aug 22 17:59:03 1996  Fred Fish  <fnf@cygnus.com>
8530
8531         From: Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
8532         * gdb.texinfo (Frames): Fix typo.
8533
8534 Tue Jul 23 10:06:20 1996  Fred Fish  <fnf@cygnus.com>
8535
8536         * gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
8537         a target_signal as arg type, not a pid.
8538
8539 Fri Jul 12 11:10:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
8540
8541         * gdb.texinfo:  Document `set assembly-language'.
8542
8543 Thu Jul 11 13:50:28 1996  Stan Shebs  <shebs@andros.cygnus.com>
8544
8545         * remote.texi: Update list of stubs in the GDB distribution.
8546
8547 Fri Jul  5 15:38:54 1996  Fred Fish  <fnf@cygnus.com>
8548
8549         * gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
8550         Also document that some systems can use mmalloc but must define
8551         this if their C runtime allocates memory that is later freed.
8552         (MMCHECK_FORCE): Document new macro.
8553
8554 Fri Jun 28 22:17:10 1996  Dawn Perchik  <dawn@cygnus.com>
8555
8556         * remote.texi: Add documentation for target Sparclet.
8557
8558 Mon Jun 24 18:12:22 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
8559
8560         * Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL,
8561         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
8562         * configure.in: Rewritten for autoconf.
8563         * configure: New.
8564
8565 Mon Jun 17 10:43:41 1996  Fred Fish  <fnf@cygnus.com>
8566
8567         * Makefile.in (DVIPS): New define, set to dvips.
8568         (dvi): Add stabs.dvi.
8569         (ps): New target.
8570         (all-doc): Depend on info, dvi, and ps targets.
8571         (STAGESTUFF): Add *.ps and *.dvi files.
8572         (clean-info, clean-dvi): Remove.
8573         (mostlyclean): Does not depend upon clean-info or clean-dvi,
8574         rules completely rewritten.
8575         (maintainer-clean): Remove clean-info and clean-dvi
8576         dependencies and put their actions in the rules.
8577         (gdb.ps): New target
8578         (gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
8579         intermediate TeX files, whether they have 2 or 3 character
8580         extensions.
8581         (gdbint.ps): Add target and rules.
8582         (gdb-internals): Delete unused target.
8583         (Makefile): Depends upon config.status also.
8584
8585 Sat Mar 30 15:46:58 1996  Fred Fish  <fnf@cygnus.com>
8586
8587         * gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
8588         set.
8589
8590 Sat Mar 16 15:10:20 1996  Fred Fish  <fnf@cygnus.com>
8591
8592         From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
8593         * gdb.texinfo (Expressions): Fix erroneous array constant example.
8594
8595 Sat Mar 16 13:28:45 1996  Fred Fish  <fnf@cygnus.com>
8596
8597         * gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.
8598
8599 Sat Feb 10 03:28:36 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
8600
8601         * gdb.texinfo (Print settings):  Document
8602         `set/show print static-members' commands.
8603
8604 Wed Jan 10 14:16:37 1996  Fred Fish  <fnf@cygnus.com>
8605
8606         * gdbint.texinfo (Native): Document name change, coredep.c to
8607         core-aout.c.
8608
8609 Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <ian@cygnus.com>
8610
8611         * stabs.texinfo (Include Files): Document the values the SunOS4
8612         linker creates for N_BINCL/N_EINCL/N_EXCL stabs.
8613
8614 Fri Dec  8 21:08:44 1995  Fred Fish  <fnf@cygnus.com>
8615
8616         * gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
8617         Fix typo.
8618
8619 Fri Dec  1 11:07:50 1995  Fred Fish  <fnf@cygnus.com>
8620
8621         * gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
8622         "gdb.tar.Z".
8623
8624 Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <ian@cygnus.com>
8625
8626         * Makefile.in (maintainer-clean): New target, synonym for
8627         realclean.
8628
8629 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
8630
8631         * Update all FSF addresses except those in COPYING* files.
8632
8633 Wed Jul 19 18:43:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
8634
8635         From Richard Earnshaw (rearnsha@armltd.co.uk):
8636         * gdb.texinfo (convenience variables): Document $_exitcode.
8637         (quit): Document optional expression to use as exit code.
8638
8639 Thu Jun 22 21:27:33 1995  Victoria Mixon  <victoria@cygnus.com>
8640
8641         * gdb.texinfo, remote.texi: Brought up to date with various
8642         GDB changes.
8643
8644 Tue Jun 20 14:35:38 1995  Stan Shebs  <shebs@andros.cygnus.com>
8645
8646         * gdb.texinfo: Update dates and versions, fix comments about
8647         hardware watchpoints in future releases and about the
8648         sharedlibrary command.
8649
8650 Mon May  8 09:30:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8651
8652         * stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
8653         C_FUN stab.  Other cleanups.
8654
8655 Wed Apr 19 07:02:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8656
8657         * remote.texi (Bootstrapping): Clarify that flush_i_cache is only
8658         for the sparc stub.
8659
8660 Tue Apr 11 11:41:49 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8661
8662         * annotate.texi: Clarify which addresses have differing formats
8663         depending on the language and which do not.
8664
8665 Tue Mar 28 16:56:22 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
8666
8667         * remote.texi (NetWare): Changed example to use BOARD= instead of
8668           NODE= argument to reflect correspoding change to gdbserve.nlm.
8669
8670 Fri Mar 17 06:47:02 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8671
8672         * stabs.texinfo (Negative Type Numbers): Mention the fact that
8673         GDB, as well as AIX dbx, supports the size type attribute.
8674
8675 Thu Mar 16 12:11:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8676
8677         * stabs.texinfo (Negative Type Numbers): Document types -31 to -34.
8678
8679 Mon Mar 13 16:49:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
8680
8681         * gdb.texinfo (Define):  Document $arg0... arguments to commands,
8682         and new 'if' and 'while' commands.
8683
8684 Fri Feb 17 15:24:35 1995  Per Bothner  <bothner@kalessin.cygnus.com>
8685
8686         * gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.
8687
8688 Wed Feb 15 11:59:18 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
8689
8690         * all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
8691         * remote.texi (NetWare): New node, how to use gdbserve.nlm on
8692           NetWare targets.  Mostly stolen from the Server node.
8693
8694 Fri Feb 10 20:20:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8695
8696         * gdb.texinfo (Setting): Talk about the language of a source file
8697         versus the working language.  The old documentation did not match
8698         what GDB did.
8699
8700 Wed Feb  1 20:26:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8701
8702         * stabs.texinfo (Source Files): Document N_SO used to mark the end
8703         of a source file.
8704
8705 Mon Jan 23 14:23:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
8706
8707         * gdb.texinfo (Processes): New node.
8708
8709 Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
8710
8711         * remote.texi: Update documentation of set/show mipsfpu.
8712
8713 Fri Jan  6 17:17:28 1995  Stan Shebs  <shebs@andros.cygnus.com>
8714
8715         * gdbgui.texinfo: New file, manual for GUI (gdbtk) users.
8716         * Makefile.in (gdbgui.dvi, gdbgui.info): New actions.
8717
8718 Sun Sep  4 16:47:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
8719
8720         * gdbint.texinfo: Removed mentions of some incorrectly placed and
8721         obsolete conditionals, described some others.
8722
8723 Mon Aug  1 15:42:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8724
8725         * gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
8726         SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.
8727
8728 Mon Aug  1 15:12:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
8729
8730         * gdbint.texinfo: Put regex conditionals in their own table.
8731
8732 Tue Jul 26 18:32:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
8733
8734         * gdbint.texinfo: Removed mentions of many obsolete conditionals,
8735         described or fixed the descriptions of many others.
8736
8737 Sun Jul 17 14:14:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
8738
8739         * gdb.texinfo: Add some more credits.
8740         * gdbint.texinfo: Capitalize GDB consistently, describe some
8741         macros and remove some.
8742
8743 Thu Jul 14 18:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
8744
8745         * gdbint.texinfo: Removed mentions of many incorrectly placed and
8746         obsolete conditionals, described some others.
8747
8748 Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
8749
8750         * gdb.texinfo (help targets):  Changed to `help target', which
8751         is the correct gdb command.
8752
8753 Wed Jun 22 18:00:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8754
8755         * annotate.texi (TODO): New node, for keeping track of annotations
8756         suggested but not yet implemented.
8757
8758 Wed Jun  1 16:10:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8759
8760         * stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
8761         another symbol, it is not the address itself.
8762
8763 Thu May  5 20:23:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
8764
8765         * stabs.texinfo (Stab Section Basics): Add comment about alignment
8766         of stabs-in-coff sections.
8767
8768 Wed May  4 06:26:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8769
8770         * annotate.texi: Change edition to 0.5 and date to May 1994.
8771         Add index.
8772         (Frames): New node, for frame annotation.
8773         (Displays): New node, for display annotation.
8774
8775         * remote.texi (MIPS Remote): Say that set timeout doesn't apply
8776         when waiting for your program to stop.
8777
8778 Fri Apr 29 18:24:46 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8779
8780         * annotate.texi (Breakpoint Info): Document annotation of header
8781         fields and record annotation.
8782
8783 Thu Apr 28 07:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8784
8785         * annotate.texi: New file, to document annotations.
8786
8787 Thu Apr 21 14:20:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8788
8789         * Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
8790         16 I meant to make this change but did not).  Do remove gdb-cfg.texi.
8791
8792 Wed Apr 20 11:22:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8793
8794         * stabs.texinfo (Stab Section Basics): Say what is in .stab
8795         section, and say n_strx field is compilation unit relative.
8796         * stabs.texinfo: Don't use @code for a.out when it is the name of
8797         an object file format.
8798
8799 Wed Apr 13 20:29:54 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
8800
8801         * gdb.texinfo: Refer to file names, not path names, per rms
8802         convention.
8803         (Arguments): Fix typo.
8804
8805 Thu Mar 24 08:09:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8806
8807         * stabs.texinfo (Global Variables): Talk about stabs in files
8808         where variables are referenced, but not defined.
8809
8810 Wed Mar 23 07:16:36 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8811
8812         * stabs.texinfo: Move stuff on @ and # type descriptors from node
8813         Cplusplus to new nodes Member Type Descriptor and Method Type
8814         Descriptor.  Re-write stuff for #.
8815
8816 Wed Mar 16 08:20:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8817
8818         * gdb.texinfo (Print Settings): Don't document "set print
8819         fast-symbolic-addr off".  The bug which it worked around was fixed
8820         on 25 Feb 94 in coffread.c, so I'm nuking the command.
8821
8822         * stabs.texinfo (Alternate Entry Points): New node, rewritten from
8823         N_ENTRY node.
8824
8825         * stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.
8826
8827 Tue Mar 15 08:43:02 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8828
8829         * gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
8830         references to ieee-float.c.
8831
8832 Fri Mar 11 08:09:40 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8833
8834         * gdb.texinfo (Set Breaks): Update documentation for tbreak to
8835         match what the code actually does.
8836
8837 Wed Mar  9 19:43:05 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8838
8839         * stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.
8840
8841 Tue Mar  1 17:04:43 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
8842
8843         * stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
8844         i, and b.
8845
8846 Wed Feb 23 10:44:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
8847
8848         * stabs.texinfo: Document N_RBRAC as function relative for COFF as
8849         well as for ELF and SOM.  Unify the descriptions of ELF and SOM
8850         as "stabs in sections" rather than just saying "ELF and SOM".
8851         Also make that stuff apply to COFF.
8852
8853 Fri Feb 18 08:25:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8854
8855         * gdb.texinfo (Formatting Documentation): Change GhostScript to
8856         Ghostscript.
8857
8858 Fri Feb  4 06:31:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8859
8860         * gdb.texinfo (Continuing and Stepping): When talking about "step"
8861         versus functions without line numbers, also mention stepping into
8862         them as well as "step" when you are in them.  Tell the user how to
8863         deal with the situation.  Add comment about "debugging information".
8864
8865 Thu Feb  3 11:39:59 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8866
8867         * stabs.texinfo (Enumerations): Document restriction on where
8868         enumeration types can appear and still win with GDB.
8869
8870 Wed Feb  2 11:29:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8871
8872         * stabs.texinfo (Negative Type Numbers): Document format for type
8873         -16.
8874
8875 Thu Jan 27 16:53:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8876
8877         * gdb.texinfo (Selection, Frame Info): Update information about
8878         arbitrary frame specficiations.
8879
8880 Wed Jan 26 15:31:57 1994  Roland H. Pesch  (pesch@fowanton.cygnus.com)
8881
8882         * gdb.texinfo, remote.texi: general editing pass prior to Net release
8883
8884 Tue Jan 25 12:12:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8885
8886         * stabs.texinfo (String Field): Discuss continuing stabs with ?.
8887
8888 Wed Jan 19 06:39:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
8889
8890         * stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.
8891
8892 Sun Jan 16 12:43:32 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8893
8894         * stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
8895         Differences node to Statics node.
8896         (Statics): Discuss XCOFF use of V symbol descriptor.
8897
8898         * Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
8899         not clean.
8900
8901 Wed Jan 12 21:29:54 1994  John Gilmore  (gnu@cygnus.com)
8902
8903         * gdb.texinfo (Print Settings): Document `set print
8904         fast-symbolic-addr' and improve the doc for some other
8905         `set print's.
8906
8907 Mon Jan  3 17:23:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
8908
8909         * stabs.texinfo (String Field): Talk about defining several type
8910         numbers at once.
8911         Fix lint regarding changing node ELF Transformations to
8912         ELF and SOM Transformations.
8913
8914 Fri Dec 31 00:42:43 1993  John Gilmore  (gnu@cygnus.com)
8915
8916         * stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).
8917
8918 Tue Dec 28 09:30:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8919
8920         * stabs.texinfo (Cross-References): `::' is for nested types only
8921         within <>.
8922         (Structures): Document static members.
8923
8924 Mon Dec 27 13:55:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8925
8926         * stabs.texinfo: Document S type attribute.
8927
8928 Sun Dec 26 20:46:36 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
8929
8930         * stabs.texinfo: Add notes about stabs-in-som where appropriate.
8931
8932 Fri Dec  3 19:13:19 1993  John Gilmore  (gnu@cygnus.com)
8933
8934         * gdbint.texinfo:  Fix a few typos.
8935
8936 Sun Nov 28 18:06:25 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
8937
8938         * gdb.texinfo, remote.texi: formatting improvements
8939
8940         * gdb.texinfo (New Features): mention threads.
8941         (Summary, C): fix xrefs in newly contributed text.
8942         (Threads): index entries, clarifications, example
8943         (passim): minor typos fixed, phrasing improvements
8944
8945         * remote.texi (Bootstrapping): rephrase text on ^C and add index
8946         entries; (Server): explain use of gdbserver w/real-time systems,
8947         add example of conflicting TCP port; (MIPS Remote) break up
8948         running text into table, highlighting commands, and add example.
8949
8950 Wed Nov 24 14:15:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
8951
8952         * refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed
8953
8954 Fri Nov 12 16:10:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8955
8956         * stabs.texinfo (Nested Symbols): New node.
8957         (String Field, Symbol Descriptors, Cross-References): Refer to it.
8958
8959 Thu Nov 11 13:26:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8960
8961         * stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
8962         to picking which Bbss.bss symbol to use, and (because there seems to
8963         be no good way of doing it) re-write some of the text to make it
8964         sound like Bbss.bss isn't such a great idea after all (as currently
8965         designed).
8966
8967         * gdb.texinfo (C): In addition to saying people have to use g++ for
8968         good results, say they have to use stabs.  Specifically say cfront
8969         doesn't work well.
8970         (Summary): Merge in information on Modula-2, Pascal, and Chill from
8971         the gdb README.  Add xrefs to places where the support for the various
8972         languages is described in detail.
8973
8974 Mon Nov  8 11:47:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8975
8976         * stabs.texinfo: Clean up stuff about visibility and virtual
8977         characters.
8978
8979         * stabs.texinfo (N_M2C): Cite Sun doc.
8980
8981 Fri Nov  5 16:27:27 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
8982
8983         * gdb.texinfo: updates re threads.
8984         * remote.texinfo: avoid index entries starting with digits.
8985
8986 Tue Nov  2 09:08:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8987
8988         * stabs.texinfo (Enumerations): Talk about large, negative and
8989         octal values.  Clean up cross reference to type attributes.
8990         (String Field): Say that GDB 4.11 supports size attribute.
8991
8992 Sun Oct 31 13:31:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8993
8994         * remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
8995         is a mandatory step.  Make the stuff about that more concise.
8996
8997 Wed Oct 27 00:25:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
8998
8999         * stabs.texinfo (Class Names): New node.
9000
9001         * gdb.texinfo (Command Files): Explain order of init file reading.
9002
9003         * remote.texi (Bootstrapping): Talk about getting the serial driver
9004         to deal with ^C sent by gdb to stop the remote system.
9005
9006 Mon Oct 25 03:25:41 1993  Tom Lord  (lord@cygnus.com)
9007
9008         * libgdb.texinfo (I/O): incorporated better phrasing from rich.
9009
9010         * libgdb.texinfo (Defining Commands): made the DOC arg
9011         to gdb_define_app_command a char * instead of char **
9012         per a suggestion from kingdon.
9013
9014         * libgdb.texinfo: total rewrite from a different starting
9015         premise.
9016
9017 Wed Oct 20 18:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9018
9019         * stabs.texinfo (Local Variable Parameters): Re-write paragraph on
9020         floats passed as doubles (to improve clarity).
9021
9022 Tue Oct 19 14:21:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9023
9024         * gdb.texinfo (Source Path): index entries for $cwd, $pdir
9025
9026         * a4rc.sed: update to work with Andreas Vogel papersize params
9027
9028         * refcard.tex: use Andreas Vogel simplifications of papersize
9029         params; remove useless version info; update copyright date.
9030
9031 Tue Oct 19 10:46:22 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9032
9033         * gdb.texinfo (Symbols): Add class NAME to doc for ptype.
9034
9035 Tue Oct 12 09:11:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9036
9037         * gdb.texinfo (Files): Say what address the load command loads it at.
9038
9039         * stabs.texinfo (Common Blocks): Minor cleanups.
9040
9041         * stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
9042         that Sun has backed away from the linker kludge and thus the relevant
9043         issue is changes to the SunPRO tools, not the Solaris linker.
9044
9045         * stabs.texinfo (Traditional Integer Types): Clean up description
9046         of octal bounds a little bit.  Document extra leading zeroes.
9047
9048 Thu Oct  7 16:15:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9049
9050         * gdb.texinfo (Signaling): Update for symbolic symbol names
9051         and add a section explaining the difference between the GDB
9052         signal command and the shell kill utility.
9053
9054 Wed Oct  6 13:23:01 1993  Tom Lord  (lord@rtl.cygnus.com)
9055
9056         * libgdb.texinfo: added `@' to braces that were unescaped.
9057
9058 Mon Oct  4 10:42:18 1993  Tom Lord  (lord@rtl.cygnus.com)
9059
9060         * libgdb.texinfo: new file.  Spec for the gdb library.
9061
9062 Sun Oct  3 15:26:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9063
9064         * stabs.texinfo (Include Files): Fix typo (start -> end).
9065
9066 Thu Sep 30 18:24:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9067
9068         * gdb.texinfo, remote.texi: assorted small improvements, mostly
9069         from Melissa at FSF's editing pass.
9070
9071 Thu Sep 30 11:54:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9072
9073         * gdb.texinfo: Remove stuff about ar and 14 character filenames.
9074         I believe this was fixed by the 13 Sep 89 change to print_frame_info.
9075         Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
9076
9077 Wed Sep 22 21:22:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9078
9079         * remote.texi (Bootstrapping): Discuss 386 call gates.
9080
9081 Sat Sep 18 17:10:44 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
9082
9083         * stabs.texinfo (Based Variables): New node.
9084
9085 Thu Sep 16 17:48:55 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
9086
9087         * stabs.texinfo (Negative Type Numbers): Re-write discussions of
9088         names, sizes, and formats to suggest how not to lose.
9089
9090 Sat Sep 11 09:35:11 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
9091
9092         * stabs.texinfo (Methods): Fix typo.
9093
9094 Fri Sep 10 06:34:20 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
9095
9096         * gdb.texinfo: Fix a few typos.
9097
9098 Wed Sep  8 09:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9099
9100         * gdb.texinfo: Clarify how well it works with Fortran.
9101
9102         * stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
9103         More on relocating stabs in ELF files.
9104
9105 Tue Sep  7 13:45:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9106
9107         * stabs.texinfo (Stabs In ELF): Talk about N_FUN value.
9108
9109 Mon Sep  6 19:23:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9110
9111         * stabs.texinfo (Local Variable Parameters): Talk about nameless
9112         parameters on VAX.
9113
9114 Fri Sep  3 17:06:08 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9115
9116         * gdb.texinfo: @up/@down -> @raisesections/@lowersections
9117
9118 Fri Sep  3 12:04:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9119
9120         * stabs.texinfo: Make info author notice match the TeX author notice.
9121
9122 Tue Aug 31 13:21:06 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
9123
9124         * stabs.texinfo: Initial-caps all words in node names and
9125         non-trivial words in section names.
9126
9127 Mon Aug 30 11:13:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9128
9129         * stabs.texinfo: Many minor cleanups.
9130
9131         * stabs.texinfo: Remove @deffn except from Expanded Reference node.
9132
9133 Sat Aug 28 12:08:09 1993  David J. MacKenzie  (djm@edison.eng.umd.edu)
9134
9135         * stabs.texinfo: Remove full description of big example.
9136         It's not really helpful; just use pieces of it where appropriate.
9137         Add more Texinfo formatting directives (@samp, etc.).
9138         Use @deffn to define stab types.
9139         Eliminate some wordiness.  Break up some nodes.
9140         Add an (alphabetized) index of symbol types.
9141         Use consistent capitalization style in node and section names.
9142
9143 Thu Aug 26 06:36:31 1993  Fred Fish  (fnf@deneb.cygnus.com)
9144
9145         * gdb.texinfo:  Change typo "Two two" to "The two".
9146
9147 Sun Aug 22 12:15:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9148
9149         * stabs.texinfo (XCOFF-differences): Remove references to
9150         non-existent types N_DECL and N_RPSYM.
9151
9152         * stabs.texinfo (String Field): Say that type attributes bug is
9153         fixed in GDB 4.10, since it is.
9154
9155         * stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.
9156
9157 Sat Aug 21 04:32:28 1993  David MacKenzie  (djm@cygnus.com)
9158
9159         * stabs.texinfo: Formatting cleanups.
9160
9161 Fri Aug 20 20:49:53 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9162
9163         * stabs.texinfo: When explaining the n_type of a stab, standardize
9164         how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
9165         no tabs, use @r).
9166         (Global Variables): Clean up.
9167
9168 Tue Aug 17 15:57:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9169
9170         * stabs.texinfo (Stack Variables): Re-write.
9171
9172 Mon Aug 16 21:20:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9173
9174         * stabs.texinfo (Stabs-in-elf): Talk about getting the start
9175         addresses of a source file.  Also revise formatting.
9176         Change "object module" or "object file" to "source file".
9177         Various: Miscellaneous cleanups.
9178
9179 Thu Aug 12 15:11:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9180
9181         * stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.
9182
9183 Tue Aug 10 16:57:49 1993  Stan Shebs  (shebs@rtl.cygnus.com)
9184
9185         * gdbint.texinfo: Removed many nonsensical machine-collected
9186         host and target conditionals, described some of the remainder.
9187
9188 Tue Aug 10 13:28:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9189
9190         * gdbint.texinfo (Getting Started): Use @itemize, not @table.
9191
9192         * gdbint.texinfo (Top): Add name to @top line, and re-write the
9193         paragraph which follows.
9194
9195         * gdbint.texinfo (Host): Use @code not @samp for Makefile
9196         variables.  Looks better and avoids overful hbox.
9197
9198 Fri Jul 30 18:26:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9199
9200         * stabs.texinfo (Procedures): Improve stuff on nested functions.
9201
9202 Thu Jul 29 15:10:58 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9203
9204         * remote.texi: (MIPS Remote) clearer doc for set/show timeout,
9205         retransmit-timeout
9206
9207 Thu Jul 29 13:16:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9208
9209         * gdbint.texinfo: Update statement about `some ancient Unix
9210         systems, like Ultrix 4.0' to Ultrix 4.2.
9211
9212 Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)
9213
9214         * h8-cfg.texi, all-cfg.texi: new flag GDBSERVER
9215
9216         * Makefile.in: depend on remote.texi rather than gdbinv-s.texi
9217
9218         * remote.texi: (Server) New node on gdbserver.  (Remote Serial,
9219         ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.
9220
9221         * remote.texi: new name for former gdbinv-s.texi
9222
9223         * gdb.texinfo: use remote.texi rather than gdbinv-s.texi
9224
9225 Wed Jul 28 08:26:24 1993  Ian Lance Taylor  (ian@cygnus.com)
9226
9227         * gdbinv-s.texi: Documented timeout and retransmit-timeout
9228         variables for MIPS remote debugging protocol.
9229
9230 Mon Jul 26 13:00:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9231
9232         * stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.
9233
9234 Tue Jul 20 16:30:41 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
9235
9236         * Makefile.in (refcard.dvi): Use srcdir where necessary.
9237
9238 Mon Jul 19 12:02:50 1993  Roland H. Pesch  (pesch@cygnus.com)
9239
9240         * gdb.texinfo: repair conditional bugs in text markup
9241
9242 Fri Jul 16 18:57:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9243
9244         * gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
9245         to select Modula-2 material.
9246
9247 Thu Jul 15 13:15:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9248
9249         * stabs.texinfo: Cleanups regarding statics.
9250
9251         * gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
9252         (Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.
9253
9254 Mon Jul 12 13:37:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9255
9256         * stabs.texinfo: N_MAIN is sometimes used for C.
9257
9258 Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
9259
9260         * gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.
9261
9262 Tue Jul  6 12:41:28 1993  John Gilmore  (gnu@cygnus.com)
9263
9264         * gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
9265         removed from the code by Kingdon.
9266
9267 Tue Jul  6 12:24:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9268
9269         * gdb.texinfo (Break Commands): Remove stuff about flushing terminal
9270         input when evaluating breakpoint conditions; the bug has been fixed.
9271
9272         * gdb.texinfo (Continuing and Stepping): Argument to "continue"
9273         sets the ignore count to N-1, not to N.
9274
9275 Thu Jul  1 14:57:42 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9276
9277         * refcard.tex (\hoffset): correct longstanding error to match
9278           intended offset; avoids cutting off edge on some printers
9279
9280 Wed Jun 30 18:23:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9281
9282         * stabs.texinfo (Parameters): Say that order of stabs is significant.
9283
9284 Fri Jun 25 21:34:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9285
9286         * stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.
9287
9288 Fri Jun 25 16:15:10 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9289
9290         * Makefile.in: (REFEDITS) new var to control whether PS or CM
9291         fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
9292         collect sed edits if any, apply to refcard before formatting;
9293         (refcard.ps) stop implying PS fonts if PS output requested;
9294         (lrefcard.ps) delete extra target for variant PS fonts
9295
9296         * refcard.tex: parametrize papersize dependent info, collect
9297           in easily replaced spot
9298
9299         * a4rc.sed: new file, edits to refcard for A4 paper
9300
9301 Fri Jun 25 14:21:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9302
9303         * stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.
9304
9305 Wed Jun 23 15:02:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9306
9307         * stabs.texinfo (Negative Type Numbers): Minor character cleanups.
9308
9309 Tue Jun 22 16:31:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9310
9311         * stabs.texinfo: Express disapproval of 'D' symbol descriptor
9312         politely rather than rudely.
9313
9314 Fri Jun 18 19:42:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9315
9316         * stabs.texinfo: Document common blocks.
9317
9318 Fri Jun 18 12:12:57 1993  Fred Fish  (fnf@cygnus.com)
9319
9320         * stabs.texinfo:  Add some basic info about stabs-in-elf.
9321
9322 Fri Jun 18 13:57:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9323
9324         * stabs.texinfo (Top): Minor cleanup.
9325
9326 Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
9327
9328         * Makefile.in (install-info): remove parentdir support
9329
9330 Tue Jun 15 18:11:39 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9331
9332         * gdb.texinfo (Copying): delete this node and references to it;
9333         RMS says this manual need not carry GPL. (passim): Improvements
9334         from last round at FSF, largely due to Ian Taylor review, and
9335         minor formatting improvements.
9336
9337         * gdbinv-s.texi (passim): Improvements from last round at FSF,
9338         largely due to Ian Taylor review. (Debug Session): minor edits to
9339         new text.
9340
9341 Sun Jun 13 12:52:39 1993  Jim Kingdon  (kingdon@cygnus.com)
9342
9343         * Makefile.in (realclean): Remove info and dvi files too.
9344
9345 Sat Jun 12 16:09:22 1993  Jim Kingdon  (kingdon@cygnus.com)
9346
9347         * {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
9348         * Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
9349         * gdb.texinfo: Change accordingly.
9350
9351         * stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
9352         N_{L,R}BRAC,N_SLINE are relative to.
9353
9354 Fri Jun 11 15:15:55 1993  Jim Kingdon  (kingdon@cygnus.com)
9355
9356         * Makefile.in (GDBvn.texi): Update atomically.
9357
9358 Wed Jun  9 10:58:16 1993  Jim Kingdon  (kingdon@cygnus.com)
9359
9360         * gdbinv-s.texi (Debug Session): Document exceptionHook.
9361
9362 Tue Jun  8 13:42:04 1993  Jim Kingdon  (kingdon@cygnus.com)
9363
9364         * gdb.texinfo (Print Settings): Move all stuff relating to symbolic
9365         addresses together.  Also motivate the set print symbol-filename
9366         command and suggest other solutions.
9367
9368 Tue Jun  1 22:46:43 1993  Fred Fish  (fnf@cygnus.com)
9369
9370         * gdb.texinfo (set print elements):  Note that the number of
9371         elements is set to unlimited by "set print elements 0".
9372
9373 Mon May 31 08:06:55 1993  Jim Kingdon  (kingdon@cygnus.com)
9374
9375         * stabs.texinfo (Builtin Type Descriptors): Try to clarify what
9376         NF_LDOUBLE means.
9377         (Stab Types): Include Solaris stab types.
9378         (Procedures): Document Solaris extensions.
9379
9380 Thu May 27 06:20:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
9381
9382         * gdb.texinfo:  Add `set print symbol-filename' doc.
9383
9384 Wed May 26 00:26:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9385
9386         * stabs.texinfo (Arrays): Talk about type definition vs. type
9387         information.
9388
9389         * stabs.texinfo (Builtin Type Descriptors): Talk about omitting
9390         the trailing semicolon.
9391
9392 Tue May 25 14:49:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9393
9394         * stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
9395         and merge in other parts of the document addressing these subjects.
9396         gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.
9397
9398         * stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
9399         at the end of a range type.
9400
9401         * stabs.texinfo (Subranges): "A offset" and "T offset" are not
9402         AIX extensions.
9403
9404 Mon May 24 09:00:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9405
9406         * stabs.texinfo (Stabs Format):  Misc fixes.
9407
9408 Sat May 22 10:40:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9409
9410         * stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
9411         (Traditional builtin types): Document convex convention for long long.
9412         (Negative builtin types): Discuss type names, and misc fixes.
9413
9414 Fri May 21 11:20:31 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9415
9416         * stabs.texinfo (Builtin Type Descriptors): Document the floating
9417         point types used with @samp{R} type descriptor.
9418         (Symbol Descriptors): Describe how to handle conflict between
9419         different meanings of @samp{P} symbol descriptor.
9420
9421 Thu May 20 13:35:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9422
9423         * stabs.texinfo: Remove node Quick Reference and put its children
9424         directly under the main menu.
9425
9426         * stabs.texinfo: Many more changes to bring it into line with
9427         AIX documentation and reality.  I think it now has all the
9428         information from the AIX documentation, except that I burned
9429         out when I got to variant records (Pascal and Modula-2) and
9430         all the COBOL types.  Oh well, we can add them later when we're
9431         worrying more about those languages.
9432
9433         * stabs.texinfo (Automatic variables): Talk about what it means
9434         to omit the symbol descriptor.
9435
9436 Tue May 18 17:59:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
9437
9438         * stabs.texinfo (Parameters): Add "(sometimes)" when describing
9439         gcc2 behavior with promoted args.
9440
9441 Fri May 14 21:35:29 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9442
9443         * gdb.texinfo: include readline appendices in info version of manual
9444
9445 Fri May  7 11:56:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9446
9447         * gdbinv-s.texi (Remote Serial): describe new ^C behavior in
9448         target remote.
9449
9450         * gdb.texinfo (Machine Code): more index entries for disassemble
9451
9452 Fri May  7 10:12:30 1993  Fred Fish  (fnf@cygnus.com)
9453
9454         * Clarify the intended use of the gdb-testers and gdb-patches
9455         mailing lists, and shrink gzip comment.
9456
9457 Thu May  6 16:39:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9458
9459         * gdb.texinfo (Shell Commands): do not mention SHELL env var in
9460         DOSHOST configuration of manual.
9461
9462         * gdb.texinfo (MIPS Stack): new node.
9463
9464         * all-config.texi (MIPS) new switch.
9465
9466         * gdbinv-s.texi (Nindy Options) Remove two instances of future
9467         tense; (MIPS Remote) new node.
9468
9469         * gdb.texinfo (passim) rephrases to work around makeinfo @value
9470         bug; (Environment) less passive, other small cleanups in text about
9471         .cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
9472         (Remote) new MIPS Remote menu entry.
9473
9474 Thu Apr 29 09:36:25 1993  Jim Kingdon  (kingdon@cygnus.com)
9475
9476         * stabs.texinfo: Many changes to include information from the
9477         AIX documentation.
9478
9479         * gdb.texinfo (Environment): Mention pitfall with .cshrc.
9480
9481 Tue Apr 27 14:02:57 1993  Jim Kingdon  (kingdon@cygnus.com)
9482
9483         * gdbint.texinfo (new node Debugging GDB, elsewhere):
9484         Move a bunch of information from ../README.
9485         (Getting Started): New node.
9486
9487 Fri Apr 23 17:21:13 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9488
9489         * gdbinv-s.texi, gdb.texinfo: include Hitachi SH target
9490
9491         * gdb.texinfo: advance manual revision dates to present
9492
9493         * gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
9494         stop using silly Roman numerals in @set variable names
9495
9496 Fri Apr 23 07:30:01 1993  Jim Kingdon  (kingdon@cygnus.com)
9497
9498         * stabs.texinfo (Parameters): Keep trying to get this right.
9499
9500 Wed Apr 21 15:18:47 1993  Jim Kingdon  (kingdon@cygnus.com)
9501
9502         * stabs.texinfo (Parameters): More on "local parameters".
9503
9504 Mon Apr 19 08:00:51 1993  Jim Kingdon  (kingdon@cygnus.com)
9505
9506         * stabs.texinfo (Parameters): Re-do "local parameters" section.
9507
9508 Sun Apr 18 09:47:45 1993  Jim Kingdon  (kingdon@cygnus.com)
9509
9510         * stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
9511         (Parameters): Rewrite.
9512         (xcoff-differences, Sun-differences): Minor changes.
9513
9514 Thu Apr 15 02:35:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)
9515
9516         * stabs.texinfo:  Minor cleanup.
9517
9518 Wed Apr 14 17:31:00 1993  Jim Kingdon  (kingdon@cygnus.com)
9519
9520         * gdbint.texinfo: Minor xcoff stuff.
9521
9522 Wed Apr  7 14:11:07 1993  Fred Fish  (fnf@cygnus.com)
9523
9524         * gdbint.texinfo:  Update for new config directory structure.
9525         Add info about internal type data structures.
9526
9527 Mon Apr  5 09:06:30 1993  Ian Lance Taylor  (ian@cygnus.com)
9528
9529         * Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
9530         $(srcdir).
9531         (gdb-config.texi): Depend on file in $(srcdir).
9532
9533 Fri Apr  2 16:55:13 1993  Jim Kingdon  (kingdon@cygnus.com)
9534
9535         * stabs.texinfo: Fixes about N_SO.
9536
9537 Fri Mar 26 18:00:35 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9538
9539         * gdb.texinfo: include list of nonstandard init file names
9540
9541         * *-config.texi: new switch GENERIC for text that applies *only*
9542         to (usual) multiple-target version of manual
9543
9544         * gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
9545         h8 config
9546
9547         * gdb.texinfo: depend on latest fixed makeinfo, use conditionals
9548         in menus (rather than conditionally selected multiple alternative
9549         menus).
9550
9551         * Makefile.in: define and use DOC_CONFIG var to select
9552         configuration for GDB user manual.
9553
9554         * gdb-config.texi: delete from repository, generate from Makefile.
9555
9556         * all-config.texi: normal `generic' configuration file, formerly
9557         stored as gdb-config.texi
9558
9559 Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
9560
9561         * Makefile.in: add dvi target to build all .dvi files
9562
9563 Tue Mar 23 16:03:24 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9564
9565         * gdb.texinfo, gdvinv-s.texinfo: formatting improvements.
9566
9567 Fri Mar 19 21:46:50 1993  John Gilmore  (gnu@cygnus.com)
9568
9569         * gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
9570         host conditionals.
9571         * stabs.texinfo:  More array fixes inspired by Jim's.
9572
9573 Fri Mar 19 10:23:34 1993  Jim Kingdon  (kingdon@cygnus.com)
9574
9575         * stabs.texinfo: Fixes re arrays and continuations.
9576
9577         * gdbint.texinfo: Add XCOFF node.
9578
9579 Mon Mar  8 15:52:18 1993  John Gilmore  (gnu@cygnus.com)
9580
9581         * gdb.texinfo:  Add `set print max-symbolic-offset' doc.
9582
9583 Sun Feb 21 17:09:38 1993  Per Bothner  (bothner@rtl.cygnus.com)
9584
9585         * stabs.texinfo:  Fix for array types to mention lower bounds.
9586
9587 Thu Feb 18 01:19:49 1993  John Gilmore  (gnu@cygnus.com)
9588
9589         * gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.
9590
9591 Wed Feb 17 08:15:24 1993  John Gilmore  (gnu@cygnus.com)
9592
9593         * gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.
9594
9595 Thu Feb 11 10:38:40 1993  John Gilmore  (gnu@cygnus.com)
9596
9597         * gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
9598         by Michael Ben-Gershon <mybg@CS.HUJI.AC.IL>.
9599
9600 Wed Feb 10 23:59:19 1993  John Gilmore  (gnu@cygnus.com)
9601
9602         * gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.
9603
9604 Tue Feb  9 18:26:21 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9605
9606         * gdb.texinfo, gdbinv-s.texi: misc updates
9607
9608 Sat Feb  6 10:25:47 1993  John Gilmore  (gnu@cygnus.com)
9609
9610         * gdbint.texinfo:  Brief documentation for longjmp support,
9611         from an email msg by Stu.
9612
9613 Fri Feb  5 14:10:15 1993  John Gilmore  (gnu@cygnus.com)
9614
9615         * stabs.texinfo:  Fix description of floating point "range"
9616         types (which really define basic types).  Reported by Jim Meehan,
9617         <meehan@src.dec.com>.
9618
9619         * gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.
9620
9621 Thu Feb  4 13:56:46 1993  Ian Lance Taylor  (ian@cygnus.com)
9622
9623         * gdbint.texinfo: Slightly expand section on supporting a new
9624         object file format.
9625
9626 Thu Feb  4 01:49:04 1993  John Gilmore  (gnu@cygnus.com)
9627
9628         * Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
9629         intermediate file.
9630
9631 Tue Feb  2 12:18:06 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9632
9633         * gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups
9634
9635 Mon Feb  1 15:35:47 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9636
9637         * gdbinv-s.texi: z8000 simulator target name is just "sim"
9638
9639         * gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
9640         as well as Z8002.
9641
9642 Sat Nov 28 06:51:35 1992  John Gilmore  (gnu@cygnus.com)
9643
9644         * gdbint.texinfo:  Add sections on clean design and on how to send
9645         in changes.
9646
9647 Mon Nov  9 23:57:02 1992  John Gilmore  (gnu@cygnus.com)
9648
9649         * gdbint.texinfo:  Add how to declare the result of make_cleanup.
9650
9651 Mon Oct 26 11:09:47 1992  John Gilmore  (gnu@cygnus.com)
9652
9653         * gdb.texinfo:  Fix typo, reported by Karl Berry.
9654
9655 Fri Oct 23 00:41:21 1992  John Gilmore  (gnu@cygnus.com)
9656
9657         * gdb.texinfo:  Add opcodes dir to GDB distribution description.
9658
9659 Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
9660
9661         * gdbint.texinfo: fixed a stray email address (needs @@),
9662         added @table @code to node "Native Conditionals"
9663
9664 Tue Sep 22 00:34:15 1992  John Gilmore  (gnu@cygnus.com)
9665
9666         * gdbint.texinfo:  Describe coding style of GDB.
9667
9668 Mon Sep 21 19:32:16 1992  John Gilmore  (gnu@cygnus.com)
9669
9670         * stabs.texinfo:  Minor wording changes.
9671
9672 Tue Sep 15 02:57:09 1992  John Gilmore  (gnu@cygnus.com)
9673
9674         * gdbint.texinfo:  Improve release doc slightly.
9675
9676 Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
9677
9678         * gdbint.texinfo:  Improve doc of GDB config macros.
9679
9680 Wed Sep  9 16:52:06 1992  John Gilmore  (gnu@cygnus.com)
9681
9682         * stabs.texinfo:  Remove Bothner's changes for C++ nested types.
9683         These will be reinserted when examined.
9684
9685 Mon Aug 24 01:17:55 1992  John Gilmore  (gnu@cygnus.com)
9686
9687         * gdbint.texinfo:  Make a start at documenting all the #if macros
9688         in GDB.  At least list them all, and start separating them into
9689         host-specific and target-specific.
9690
9691 Tue Aug 18 15:59:13 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9692
9693         * gdbinv-s.m4.in: refrain from using @cartouche for just a few
9694         examples (not consistent w others).
9695         gdb.texinfo: issue disclaimer paragraph on cmdline options only
9696         for generic vn of doc
9697
9698 Tue Aug 18 14:53:27 1992  Ian Lance Taylor  (ian@cygnus.com)
9699
9700         * Makefile.in: always create installation directories.
9701
9702 Tue Aug 18 14:11:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9703
9704         * gdb.texinfo: in h8 config, do not describe searching commands.
9705
9706 Mon Aug 17 18:07:59 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9707
9708         * gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
9709           conditionals; introduce a few generic switches that may be
9710           useful for other cross-dev or dos-hosted configs.
9711
9712         * gdb.texinfo: fix typo in "info reg" description
9713
9714 Sun Aug 16 01:16:18 1992  John Gilmore  (gnu@cygnus.com)
9715
9716         * stabs.texinfo:  Minor updates from running TeX over it.
9717         * Makefile.in (stabs.dvi, stabs.ps):  Add.
9718
9719 Sat Aug 15 20:52:24 1992  Per Bothner  (bothner@rtl.cygnus.com)
9720
9721         * stabs.texinfo:  Stabs documentation, written by Julia Menapace.
9722         First pass at converting it to texinfo.
9723
9724 Sat Aug 15 03:14:59 1992  John Gilmore  (gnu@cygnus.com)
9725
9726         * gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
9727         * Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).
9728
9729 Fri Aug 14 21:08:47 1992  John Gilmore  (gnu@cygnus.com)
9730
9731         * gdbint.texinfo:  Add section on partial symbol tables.
9732
9733 Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)
9734
9735         * gdb.texinfo:  document `set remotedebug' and `set
9736         rstack_high_address'.
9737
9738 Thu May 14 17:09:48 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
9739
9740         * gdb.texinfo: slight expansion of new text on reading info files
9741         * gdbinv-s.m4.in: correct and expand info on cross-debugging
9742         H8/300 from DOS.
9743
9744 Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)
9745
9746         * gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.
9747
9748 Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)
9749
9750         * gdb.texinfo:  Say how to read the `info' files.
9751
9752 Tue May  5 12:11:38 1992  K. Richard Pixley  (rich@cygnus.com)
9753
9754         * Makefile.in: gm4 -> m4.
9755
9756 Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)
9757
9758         * gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
9759         Documentation' ahead of `Installing GDB' to match README.
9760         Update shared library doc, -readnow and -mapped, and directory
9761         structure (add glob and mmalloc).  Update configure doc.
9762
9763 Tue Mar 24 23:28:38 1992  K. Richard Pixley  (rich@cygnus.com)
9764
9765         * Makefile.in: remove $(srcdir) from gdb.info rule.
9766
9767 Sat Mar  7 18:44:50 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
9768
9769         * Makefile.in: commented out gdb-all.texinfo rule.  This is
9770           temporary.
9771
9772 Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
9773
9774         * Makefile.in, configure.in: removed traces of namesubdir,
9775           -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
9776           copyrights to '92, changed some from Cygnus to FSF.
9777
9778 Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)
9779
9780         * gdb.texinfo:  Improve how we ask for bug reports.
9781
9782 Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
9783
9784         * Makefile.in: infodir belongs in datadir.
9785
9786 Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
9787
9788         * Makefile.in: remove spaces following hyphens, bsd make can't
9789           cope.  install using INSTALL_DATA.  added clean-info.  added
9790           standards.text support.
9791
9792 Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
9793
9794         * Makefile.in: idestdir and ddestdir go away.  Added copyrights
9795           and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
9796           and mandir now keyed off datadir by default.
9797
9798 \f
9799 Local Variables:
9800 mode: change-log
9801 left-margin: 8
9802 fill-column: 74
9803 version-control: never
9804 End: