gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
   2 ##2007 Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 pdfdir = $(prefix)/share/doc/gdb
  28 htmldir = $(prefix)/html
  29
  30 SHELL = @SHELL@
  31
  32 LN_S = @LN_S@
  33
  34 INSTALL = @INSTALL@
  35 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  36 INSTALL_DATA = @INSTALL_DATA@
  37
  38 mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
  39
  40 # main GDB source directory
  41 gdbdir = $(srcdir)/..
  42
  43 # where to find texinfo; GDB dist should include a recent one
  44 TEXIDIR=${gdbdir}/../texinfo
  45
  46 # where to find makeinfo, preferably one designed for texinfo-2
  47 MAKEINFO=makeinfo
  48
  49 # Note that texinfo 4.0's makeinfo --html can only generate a
  50 # single file, which would be too large, so continue to use
  51 # texi2html. -sts 2000-03-28
  52
  53 MAKEHTML = texi2html
  54 MAKEHTMLFLAGS = -menu -split_chapter
  55
  56 # where to find texi2roff, ditto
  57 TEXI2ROFF=texi2roff
  58
  59 # where to find texi2dvi, ditto
  60 TEXI2DVI=texi2dvi
  61
  62 # Where is the source dir for the READLINE library doc?
  63 # Traditionally readline is in .. or .
  64 READLINE_DIR = ${gdbdir}/../readline/doc
  65
  66 # The GDB/MI docs come from a sibling directory ../mi
  67 GDBMI_DIR = ${gdbdir}/mi
  68
  69 SET_TEXINPUTS = \
  70    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  71
  72 # Files which should be generated via 'info' and installed by 'install-info'
  73 INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
  74
  75 # Files which should be generated via 'pdf' and installed by 'install-pdf'
  76 PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
  77
  78 # There may be alternate predefined collections of switches to configure
  79 # the GDB manual.  Normally this is not done in synch with the software
  80 # config system, since this choice tends to be independent; most people
  81 # want a doc config of `all' for a generic manual, regardless of sw config.
  82 DOC_CONFIG = all
  83
  84 # This list of sed edits will edit the GDB reference card
  85 # for what fonts and what papersize to use.
  86 # By default (NO edits applied), the refcard uses:
  87 #    - Computer Modern (CM) fonts
  88 #    - US letter paper (8.5x11in)
  89 # List some of the following files for alternative fonts and paper:
  90 #  a4rc.sed     use A4 paper (297 x 210 mm)
  91 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  92 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  93 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
  94 #      for A4, CM fonts:    REFEDITS = a4rc.sed
  95 #      for US, PS fonts:    REFEDITS = psrc.sed
  96 #      for default:
  97 REFEDITS =
  98
  99 # Don Knuth's TeX formatter
 100 TEX = tex
 101 PDFTEX = pdftex
 102
 103 # Program to generate Postscript files from DVI files.
 104 DVIPS = dvips
 105
 106 # Main GDB manual
 107 GDB_DOC_SOURCE_INCLUDES = \
 108         $(srcdir)/fdl.texi \
 109         $(srcdir)/gpl.texi \
 110         $(srcdir)/agentexpr.texi \
 111         $(READLINE_DIR)/rluser.texi \
 112         $(READLINE_DIR)/inc-hist.texinfo
 113 GDB_DOC_BUILD_INCLUDES = \
 114         gdb-cfg.texi \
 115         GDBvn.texi
 116 GDB_DOC_FILES = \
 117         $(srcdir)/gdb.texinfo \
 118         $(GDB_DOC_SOURCE_INCLUDES) \
 119         $(GDB_DOC_BUILD_INCLUDES)
 120
 121 # Internals Manual
 122 GDBINT_DOC_SOURCE_INCLUDES = \
 123         $(srcdir)/fdl.texi \
 124         $(srcdir)/observer.texi
 125 GDBINT_DOC_BUILD_INCLUDES = \
 126         gdb-cfg.texi \
 127         GDBvn.texi
 128 GDBINT_DOC_FILES = \
 129         $(srcdir)/gdbint.texinfo \
 130         $(GDBINT_DOC_SOURCE_INCLUDES) \
 131         $(GDBINT_DOC_BUILD_INCLUDES)
 132
 133 # Stabs manual: All files
 134 STABS_DOC_SOURCE_INCLUDES = \
 135         $(srcdir)/fdl.texi
 136 STABS_DOC_BUILD_INCLUDES =
 137 STABS_DOC_FILES = \
 138         $(srcdir)/stabs.texinfo \
 139         $(STABS_DOC_SOURCE_INCLUDES) \
 140         $(STABS_DOC_BUILD_INCLUDES)
 141
 142 # Annotate migration document
 143 ANNOTATE_DOC_SOURCE_INCLUDES = \
 144         $(srcdir)/fdl.texi
 145 ANNOTATE_DOC_BUILD_INCLUDES = \
 146         gdb-cfg.texi
 147 ANNOTATE_DOC_FILES = \
 148         $(srcdir)/annotate.texinfo \
 149         $(ANNOTATE_DOC_SOURCE_INCLUDES) \
 150         $(ANNOTATE_DOC_BUILD_INCLUDES)
 151
 152 #### Host, target, and site specific Makefile fragments come in here.
 153 ###
 154
 155 all:
 156
 157 info: $(INFO_DEPS)
 158 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
 159 ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
 160 html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
 161 pdf: $(PDFFILES)
 162 all-doc: info dvi ps # pdf
 163 diststuff: info
 164
 165 install-info: $(INFO_DEPS)
 166         $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
 167         @list='$(INFO_DEPS)'; \
 168         for file in $$list; do \
 169           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 170           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 171             if test -f $$d/$$ifile; then \
 172               echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
 173               $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
 174             else : ; fi; \
 175           done; \
 176         done
 177         $(POST_INSTALL)
 178         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 179           list='$(INFO_DEPS)'; \
 180           for file in $$list; do \
 181             echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
 182             install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
 183           done; \
 184         else : ; fi
 185
 186 uninstall-info:
 187         $(PRE_UNINSTALL)
 188         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 189           ii=yes; \
 190         else ii=; fi; \
 191         list='$(INFO_DEPS)'; \
 192         for file in $$list; do \
 193           test -z "$$ii" \
 194             || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 195         done
 196         $(NORMAL_UNINSTALL)
 197         list='$(INFO_DEPS)'; \
 198         for file in $$list; do \
 199           (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 200         done
 201
 202 install-html: html
 203         for i in *.html ; do \
 204                 $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
 205         done
 206
 207 pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 208
 209 install-pdf: $(PDFFILES)
 210         @$(NORMAL_INSTALL)
 211         test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
 212         @list='$(PDFFILES)'; for p in $$list; do \
 213           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 214           f=$(pdf__strip_dir) \
 215           echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
 216           $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
 217         done
 218
 219 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 220
 221 # Copy the object files from a particular stage into a subdirectory.
 222 stage1: force
 223         -mkdir stage1
 224         -mv $(STAGESTUFF) stage1
 225
 226 stage2: force
 227         -mkdir stage2
 228         -mv $(STAGESTUFF) stage2
 229
 230 stage3: force
 231         -mkdir stage3
 232         -mv $(STAGESTUFF) stage3
 233
 234 against=stage2
 235
 236 comparison: force
 237         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 238
 239 de-stage1: force
 240         -(cd stage1 ; mv -f * ..)
 241         -rmdir stage1
 242
 243 de-stage2: force
 244         -(cd stage2 ; mv -f * ..)
 245         -rmdir stage2
 246
 247 de-stage3: force
 248         -(cd stage3 ; mv -f * ..)
 249         -rmdir stage3
 250
 251 # GDB QUICK REFERENCE (dvi output)
 252 refcard.dvi : refcard.tex $(REFEDITS)
 253         echo > tmp.sed
 254         for f in x $(REFEDITS) ; do \
 255                 test x$$f = xx && continue ; \
 256                 cat $(srcdir)/$$f >>tmp.sed ; \
 257         done
 258         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 259         $(SET_TEXINPUTS) $(TEX) sedref.tex
 260         mv sedref.dvi refcard.dvi
 261         rm -f sedref.log sedref.tex tmp.sed
 262
 263 refcard.ps : refcard.dvi
 264         $(DVIPS) -t landscape -o $@ $?
 265
 266 refcard.pdf : refcard.tex $(REFEDITS)
 267         echo > tmp.sed
 268         for f in x $(REFEDITS) ; do \
 269                 test x$$f = xx && continue ; \
 270                 cat $(srcdir)/$$f >>tmp.sed ; \
 271         done
 272         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 273         $(SET_TEXINPUTS) $(PDFTEX) sedref.tex
 274         mv sedref.pdf refcard.pdf
 275         rm -f sedref.log sedref.tex tmp.sed
 276
 277 # File to record current GDB version number (copied from main dir version.in)
 278 GDBvn.texi : ${gdbdir}/version.in
 279         echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 280         mv GDBvn.new GDBvn.texi
 281
 282 # Updated atomically
 283 .PRECIOUS: GDBvn.texi
 284
 285 # Choose configuration for GDB manual (normally `all'; normally not tied into
 286 # `configure' script because most users prefer generic version of manual,
 287 # not one for their binary config---which may not be specifically
 288 # defined anyways).
 289 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 290         (test "$(LN_S)" = "ln -s" && \
 291           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 292         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 293         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 294
 295 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 296 # If your texinfo or makeinfo don't support these, get a new texinfo release
 297 #
 298 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 299 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 300 #   source directory for the benefit of people who *don't* use this makefile,
 301 #   VPATH will often tell make not to bother building it, because the one
 302 #   in the srcdir is up to date.  (if not, then make should build one here).
 303
 304 # Clean these up before each run.  Avoids a catch 22 with not being
 305 # able to re-generate these files (to fix a corruption) because these
 306 # files contain a corruption.
 307 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 308         gdb.tp* gdb.vr*
 309
 310 # GDB MANUAL: TeX dvi file
 311 gdb.dvi: ${GDB_DOC_FILES}
 312         if [ ! -f ./GDBvn.texi ]; then \
 313                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 314                 ln $(srcdir)/GDBvn.texi . || \
 315                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 316         rm -f $(GDB_TEX_TMPS)
 317         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
 318
 319 gdb.ps: gdb.dvi
 320         $(DVIPS) -o $@ $?
 321
 322 gdb.pdf: ${GDB_DOC_FILES}
 323         if [ ! -f ./GDBvn.texi ]; then \
 324                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 325                 ln $(srcdir)/GDBvn.texi . || \
 326                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 327         rm -f $(GDB_TEX_TMPS)
 328         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
 329
 330 # GDB MANUAL: info file
 331 gdb.info: ${GDB_DOC_FILES}
 332         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 333                 -o gdb.info $(srcdir)/gdb.texinfo
 334
 335 # GDB MANUAL: roff translations
 336 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 337 # If you want an index, see texi2roff doc for postprocessing
 338 # and add -i to texi2roff invocations below.
 339 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 340 #    corresponding -e lines when later texi2roff's are current)
 341 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 342 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 343 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 344 # + @alphaenumerate is ridiculously new, turned into @enumerate
 345
 346 # texi2roff doesn't have a notion of include dirs, so we have to fake
 347 # it out for gdb manual's include files---but only if not configured
 348 # in main sourcedir.
 349 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 350         if [ ! -f gdb.texinfo ]; then \
 351                 (test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 352                 ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 353                 cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 354         fi
 355         touch links2roff
 356
 357 # gdb manual suitable for [gtn]roff -me
 358 gdb.me: $(GDB_DOC_FILES) links2roff
 359         sed -e '/\\input texinfo/d' \
 360                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 361                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 362                 -e '/^@c /d' \
 363                 -e 's/{.*,,/{/' \
 364                 -e 's/@ / /g' \
 365                 -e 's/^@alphaenumerate/@enumerate/g' \
 366                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 367                 $(srcdir)/gdb.texinfo | \
 368         $(TEXI2ROFF) -me | \
 369         sed -e 's/---/\\(em/g' \
 370         >gdb.me
 371
 372 # gdb manual suitable for [gtn]roff -ms
 373 gdb.ms: $(GDB_DOC_FILES) links2roff
 374         sed -e '/\\input texinfo/d' \
 375                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 376                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 377                 -e '/^@c /d' \
 378                 -e 's/{.*,,/{/' \
 379                 -e 's/@ / /g' \
 380                 -e 's/^@alphaenumerate/@enumerate/g' \
 381                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 382                 $(srcdir)/gdb.texinfo | \
 383         $(TEXI2ROFF) -ms | \
 384         sed -e 's/---/\\(em/g' \
 385         >gdb.ms
 386
 387 # gdb manual suitable for [tn]roff -mm
 388 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 389 #   try leaving them in
 390 gdb.mm: $(GDB_DOC_FILES) links2roff
 391         sed -e '/\\input texinfo/d' \
 392                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 393                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 394                 -e '/^@c /d' \
 395                 -e 's/{.*,,/{/' \
 396                 -e '/@noindent/d' \
 397                 -e 's/@ / /g' \
 398                 -e 's/^@alphaenumerate/@enumerate/g' \
 399                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 400                 $(srcdir)/gdb.texinfo | \
 401         $(TEXI2ROFF) -mm | \
 402         sed -e 's/---/\\(em/g' \
 403         >gdb.mm
 404
 405 # GDB MANUAL: HTML file
 406
 407 gdb_toc.html: ${GDB_DOC_FILES}
 408         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 409
 410 # Clean these up before each run.  Avoids a catch 22 with not being
 411 # able to re-generate these files (to fix a corruption) because these
 412 # files contain a corruption.
 413 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 414         gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 415
 416 # GDB INTERNALS MANUAL: TeX dvi file
 417 gdbint.dvi: $(GDBINT_DOC_FILES)
 418         rm -f $(GDBINT_TEX_TMPS)
 419         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
 420
 421 gdbint.ps : gdbint.dvi
 422         $(DVIPS) -o $@ $?
 423
 424 gdbint.pdf: $(GDBINT_DOC_FILES)
 425         rm -f $(GDBINT_TEX_TMPS)
 426         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
 427
 428 # GDB INTERNALS MANUAL: info file
 429
 430 gdbint.info: $(GDBINT_DOC_FILES)
 431         $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
 432
 433 # GDB INTERNALS MANUAL: HTML file
 434
 435 gdbint_toc.html: $(GDBINT_DOC_FILES)
 436         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 437
 438 stabs.info: $(STABS_DOC_FILES)
 439         $(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
 440
 441 # STABS DOCUMENTATION: HTML file
 442
 443 stabs_toc.html: $(STABS_DOC_FILES)
 444         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 445
 446 # Clean these up before each run.  Avoids a catch 22 with not being
 447 # able to re-generate these files (to fix a corruption) because these
 448 # files contain a corruption.
 449 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 450         stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 451
 452 # STABS DOCUMENTATION: TeX dvi file
 453 stabs.dvi : $(STABS_DOC_FILES)
 454         rm -f $(STABS_TEX_TMPS)
 455         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
 456
 457 stabs.ps: stabs.dvi
 458         $(DVIPS) -o $@ $?
 459
 460 stabs.pdf: $(STABS_DOC_FILES)
 461         rm -f $(STABS_TEX_TMPS)
 462         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
 463
 464 # Clean these up before each run.  Avoids a catch 22 with not being
 465 # able to re-generate these files (to fix a corruption) because these
 466 # files contain a corruption.
 467 ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
 468         annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
 469
 470 # ANNOTATE DOCUMENTATION: TeX dvi file
 471 annotate.dvi : $(ANNOTATE_DOC_FILES)
 472         rm -f $(ANNOTATE_TEX_TMPS)
 473         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
 474
 475 annotate.ps: annotate.dvi
 476         $(DVIPS) -o $@ $?
 477
 478 annotate.pdf: $(ANNOTATE_DOC_FILES)
 479         rm -f $(ANNOTATE_TEX_TMPS)
 480         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
 481
 482 annotate.info: $(ANNOTATE_DOC_FILES)
 483         $(MAKEINFO)  -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
 484
 485 annotate_toc.html: $(ANNOTATE_DOC_FILES)
 486         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
 487
 488 force:
 489
 490 Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
 491         $(SHELL) ./config.status
 492
 493
 494 # The "least clean" level of cleaning.  Get rid of files which are
 495 # automatically generated files that are just intermediate files,
 496
 497 mostlyclean:
 498         rm -f gdb.mm gdb.ms gdb.me links2roff
 499         rm -f $(GDB_TEX_TMPS)
 500         rm -f $(GDBINT_TEX_TMPS)
 501         rm -f $(STABS_TEX_TMPS)
 502         rm -f $(ANNOTATE_TEX_TMPS)
 503         rm -f sedref.dvi sedref.tex tmp.sed
 504
 505 clean: mostlyclean
 506         rm -f gdb-cfg.texi
 507
 508 distclean: clean
 509         rm -f Makefile config.status config.log
 510
 511 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 512 # are all part of the distribution, so it should not be removed by
 513 # "clean" or "distclean".  Use maintainer-clean to remove them.
 514
 515 maintainer-clean realclean: distclean
 516         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 517
 518 install: install-info
 519
 520 uninstall: uninstall-info