1 %%%%%%%%%%%%%%%% gdb-refcard.tex %%%%%%%%%%%%%%%%
3 %This file is TeX source for a reference card describing GDB, the GNU debugger.
4 %Copyright (C) 1991, 1992, 1993, 1996, 1998, 1999, 2000, 2007, 2008, 2009,
5 %2010, 2011 Free Software Foundation, Inc.
6 %Permission is granted to make and distribute verbatim copies of
7 %this reference provided the copyright notices and permission notices
8 %are preserved on all copies.
10 %TeX markup is a programming language; accordingly this file is source
11 %for a program to generate a reference.
13 %This program is free software; you can redistribute it and/or modify
14 %it under the terms of the GNU General Public License as published by
15 %the Free Software Foundation; either version 2, or (at your option)
18 %This program is distributed in the hope that it will be useful, but
19 %WITHOUT ANY WARRANTY; without even the implied warranty of
20 %MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
21 %General Public License for more details.
23 %You can find a copy of the GNU General Public License at the URL
24 %http://www.gnu.org/copyleft/gpl.html; or write to the Free Software
25 %Foundation, Inc., 51 Franklin Street, Fifth Floor,
26 %Boston, MA 02110-1301, USA.
27 %You can contact the maintainer at: doc@cygnus.com
29 % Documentation Department
31 % 1325 Chesapeake Terrace
32 % Sunnyvale, CA 94089 USA
38 % 22-AUG-1993 Andreas Vogel
40 % Modifications made in order to handle different papersizes correctly.
41 % You only have to set the total width and height of the paper, the
42 % horizontal and vertical margin space measured from *paper edge*
43 % and the interline and interspec spacing.
44 % In order to support a new papersize, you have to fiddle with the
45 % latter four dimensions. Just try out a few values.
46 % All other values will be computed at process time so it should be
47 % quite easy to support different paper sizes - only four values to
50 % To find the configuration places, just search for the string
53 % Andreas Vogel (av@ssw.de)
57 % Uncomment the following `magnification' command if you want to print
58 % out in a larger font. Caution! You may need larger paper. You had
59 % best avoid using 3-column output if you try this. See the ``Three
60 % column format'' section below if you want to print in three column
63 %\magnification=\magstep 1
65 % NOTE ON INTENTIONAL OMISSIONS: This reference card includes most GDB
66 % commands, but due to space constraints there are some things I chose
67 % to omit. In general, not all synonyms for commands are covered, nor
68 % all variations of a command.
69 % The GDB-under-Emacs section omits gdb-mode functions without default
70 % keybindings. GDB startup options are not described.
71 % set print sevenbit-strings, set symbol-reloading omitted.
72 % printsyms, printpsyms, omitted since they're for GDB maintenance primarily
73 % share omitted due to obsolescence
74 % set check range/type omitted at least til code is in GDB.
76 %-------------------- Three column format -----------------------
78 %%%% --- To disable three column format, comment out this entire section
80 % Three-column format for landscape printing
82 %-------- Papersize defs:
84 \newdimen\totalwidth \newdimen\totalheight
85 \newdimen\hmargin \newdimen\vmargin
86 \newdimen\secskip \newdimen\lskip
87 \newdimen\barwidth \newdimen\barheight
88 \newdimen\intersecwidth
91 %% START CONFIGURATION - PAPERSIZE DEFINITIONS
92 %------- Papersize params:
93 %% US letter paper (8.5x11in)
95 \totalwidth=
11in
% total width of paper
96 \totalheight=
8.5in
% total height of paper
97 \hmargin=
.25in
% horizontal margin width
98 \vmargin=
.25in
% vertical margin width
99 \secskip=
1pc
% space between refcard secs
100 \lskip=
2pt
% extra skip between \sec entries
101 \ifx\pdfoutput\undefined\else % check if we are using pdfTeX
102 \pdfpagewidth=
\totalwidth % width of paper in pdf output
103 \pdfpageheight=
\totalheight % height of paper in pdf output
105 %------- end papersize params
107 %% change according to personal taste, not papersize dependent
109 \barwidth=
.1pt
% width of the cropmark bar
110 \barheight=
2pt
% height of the cropmark bar
111 \intersecwidth=
0.5em
% width between \itmwid and \dfnwid
113 %% END CONFIGURATION - PAPERSIZE DEFINITIONS
117 %% values to be computed - nothing to configure
119 \newdimen\fullhsize % width of area without margins
120 \newdimen\itmwid % width of item column
121 \newdimen\dfnwid % width of definition column
122 \newdimen\temp % only for temporary use
125 %% adjust the offsets so the margins are measured *from paper edge*
127 \hoffset=-
1in
\advance \hoffset by
\hmargin
128 \voffset=-
1in
\advance \voffset by
\vmargin
131 %% fullhsize = totalwidth - (2 * hmargin)
133 \fullhsize=
\totalwidth
134 \temp=
\hmargin \multiply \temp by
2 \advance \fullhsize by -
\temp
137 %% hsize = (fullhsize - (4 * hmargin) - (2 * barwidth)) / 3
140 \temp=
\hmargin \multiply \temp by
4 \advance \hsize by -
\temp
141 \temp=
\barwidth \multiply \temp by
2 \advance \hsize by -
\temp
145 %% vsize = totalheight - (2 * vmargin)
148 \temp=
\vmargin \multiply \temp by
2 \advance \vsize by -
\temp
151 %% itmwid = (hsize - intersecwidth) * 1/3
152 %% dfnwid = (hsize - intersecwidth) * 2/3
154 \temp=
\hsize \advance \temp by -
\intersecwidth \divide \temp by
3
156 \dfnwid=
\hsize \advance \dfnwid by -
\itmwid
158 %-------- end papersize defs
161 \def\fulline{\hbox to
\fullhsize}
162 \let\lcr=L
\newbox\leftcolumn\newbox\centercolumn
164 \global\setbox\leftcolumn=
\columnbox \global\let\lcr=C
167 \global\setbox\centercolumn=
\columnbox \global\let\lcr=R
168 \else \tripleformat \global\let\lcr=L
171 % \ifnum\outputpenalty>-20000 \else\dosupereject\fi
175 %% START CONFIGURATION - ALTERNATIVE FOLDING GUIDES
177 %% For NO printed folding guide,
178 %% comment out other \def\vdecor's and uncomment:
180 %\def\vdecor{\hskip\hmargin plus1fil\hskip\barwidth plus1fil\hskip\hmargin plus1fil}
182 %% For SOLID LINE folding guide,
183 %% comment out other \def\vdecor's and uncomment:
185 %\def\vdecor{\hskip\hmargin plus1fil \vrule width \barwidth \hskip\hmargin plus1fil}
187 %% For SMALL MARKS NEAR TOP AND BOTTOM as folding guide,
188 %% comment out other \def\vdecor's and uncomment:
190 \def\vdecor{\hskip\hmargin plus1fil
191 \vbox to
\vsize{\hbox to
\barwidth{\vrule height
\barheight width
\barwidth}\vfill
192 \hbox to
\barwidth{\vrule height
\barheight width
\barwidth}}%THIS PERCENT SIGN IS ESSENTIAL
193 \hskip\hmargin plus1fil
}
196 %% END CONFIGURATION - ALTERNATIVES FOR FOLDING GUIDES
199 \def\tripleformat{\shipout\vbox{\fulline{\box\leftcolumn\vdecor
200 \box\centercolumn\vdecor
204 \def\columnbox{\leftline{\pagebody}}
207 \if R
\lcr \null\vfill\eject\fi
210 %-------------------- end three column format -----------------------
212 %-------------------- Computer Modern font defs: --------------------
220 %-------------------- end font defs ---------------------------------
223 \hyphenpenalty=
5000\tolerance=
2000\raggedright\raggedbottom
224 \normalbaselineskip=
9pt
\baselineskip=
9pt
228 \footline=
{\vbox to0pt
{\hss}}
230 \def\ctl#1{{\tt C-
#1}}
231 \def\opt#1{{\brm[{\rm #1}]}}
232 \def\xtra#1{\noalign{\smallskip{\tt#1}}}
234 \long\def\sec#1;
#2\endsec{\vskip \secskip
237 \vtop{\hsize=
\itmwid\tt
238 ##
\par\vskip \lskip }\hfil
240 &
\vtop{\hsize=
\dfnwid\hangafter=
1\hangindent=
\intersecwidth
241 \rm ##
\par\vskip \lskip}\cr
242 %Tail of \long\def fills in halign body with \sec args:
243 \noalign{{\bbf #1}\vskip \lskip}
248 {\vbbf GDB QUICK REFERENCE
}\hfil{\smrm GDB Version
5}\qquad
250 \sec Essential Commands;
251 gdb
{\it program
} \opt{{\it core
}}&debug
{\it program
} \opt{using
252 coredump
{\it core
}}\cr
253 b
\opt{\it file
\tt:
}{\it function
}&set breakpoint at
{\it function
} \opt{in
\it file
}\cr
254 run
\opt{{\it arglist
}}&start your program
\opt{with
{\it arglist
}}\cr
255 bt& backtrace: display program stack
\cr
256 p
{\it expr
}&display the value of an expression
\cr
257 c &continue running your program
\cr
258 n &next line, stepping over function calls
\cr
259 s &next line, stepping into function calls
\cr
263 gdb&start GDB, with no debugging files
\cr
264 gdb
{\it program
}&begin debugging
{\it program
}\cr
265 gdb
{\it program core
}&debug coredump
{\it core
} produced by
{\it
267 gdb --help&describe command line options
\cr
271 quit&exit GDB; also
{\tt q
} or
{\tt EOF
} (eg
\ctl{d
})
\cr
272 INTERRUPT&(eg
\ctl{c
}) terminate current command, or send to running process
\cr
276 help&list classes of commands
\cr
277 help
{\it class
}&one-line descriptions for commands in
{\it class
}\cr
278 help
{\it command
}&describe
{\it command
}\cr
281 \sec Executing your Program;
282 run
{\it arglist
}&start your program with
{\it arglist
}\cr
283 run&start your program with current argument list
\cr
284 run $
\ldots$ <
{\it inf
} >
{\it outf
}&start your program with input, output
287 kill&kill running program
\cr
289 tty
{\it dev
}&use
{\it dev
} as stdin and stdout for next
{\tt run
}\cr
290 set args
{\it arglist
}&specify
{\it arglist
} for next
292 set args&specify empty argument list
\cr
293 show args&display argument list
\cr
295 show env&show all environment variables
\cr
296 show env
{\it var
}&show value of environment variable
{\it var
}\cr
297 set env
{\it var
} {\it string
}&set environment variable
{\it var
}\cr
298 unset env
{\it var
}&remove
{\it var
} from environment
\cr
302 cd
{\it dir
}&change working directory to
{\it dir
}\cr
303 pwd&Print working directory
\cr
304 make $
\ldots$&call ``
{\tt make
}''
\cr
305 shell
{\it cmd
}&execute arbitrary shell command string
\cr
309 \line{\smrm \opt{ } surround optional arguments
\hfill $
\ldots$ show
310 one or more arguments
}
312 \centerline{\smrm \copyright 1998,
2000,
2010 Free Software Foundation, Inc.
\qquad Permissions on back
}
314 \sec Breakpoints and Watchpoints;
315 break
\opt{\it file
\tt:
}{\it line
}\par
316 b
\opt{\it file
\tt:
}{\it line
}&set breakpoint at
{\it line
} number
\opt{in
\it file
}\par
317 eg:
\quad{\tt break main.c:
37}\quad\cr
318 break
\opt{\it file
\tt:
}{\it func
}&set breakpoint at
{\it
319 func
} \opt{in
\it file
}\cr
320 break +
{\it offset
}\par
321 break -
{\it offset
}&set break at
{\it offset
} lines from current stop
\cr
322 break *
{\it addr
}&set breakpoint at address
{\it addr
}\cr
323 break&set breakpoint at next instruction
\cr
324 break $
\ldots$ if
{\it expr
}&break conditionally on nonzero
{\it expr
}\cr
325 cond
{\it n
} \opt{\it expr
}&new conditional expression on breakpoint
326 {\it n
}; make unconditional if no
{\it expr
}\cr
327 tbreak $
\ldots$&temporary break; disable when reached
\cr
328 rbreak
\opt{\it file
\tt:
}{\it regex
}&break on all functions matching
{\it
329 regex
} \opt{in
\it file
}\cr
330 watch
{\it expr
}&set a watchpoint for expression
{\it expr
}\cr
331 catch
{\it event
}&break at
{\it event
}, which may be
{\tt catch
},
{\tt throw
},
332 {\tt exec
},
{\tt fork
},
{\tt vfork
},
{\tt load
}, or
{\tt unload
}.
\cr
334 info break&show defined breakpoints
\cr
335 info watch&show defined watchpoints
\cr
337 clear&delete breakpoints at next instruction
\cr
338 clear
\opt{\it file
\tt:
}{\it fun
}&delete breakpoints at entry to
{\it fun
}()
\cr
339 clear
\opt{\it file
\tt:
}{\it line
}&delete breakpoints on source line
\cr
340 delete
\opt{{\it n
}}&delete breakpoints
341 \opt{or breakpoint
{\it n
}}\cr
343 disable
\opt{{\it n
}}&disable breakpoints
344 \opt{or breakpoint
{\it n
}}
346 enable
\opt{{\it n
}}&enable breakpoints
347 \opt{or breakpoint
{\it n
}}
349 enable once
\opt{{\it n
}}&enable breakpoints
\opt{or breakpoint
{\it n
}};
350 disable again when reached
352 enable del
\opt{{\it n
}}&enable breakpoints
\opt{or breakpoint
{\it n
}};
356 ignore
{\it n
} {\it count
}&ignore breakpoint
{\it n
},
{\it count
}
360 \qquad \opt{\tt silent
}\par
361 \qquad {\it command-list
}&execute GDB
{\it command-list
} every time breakpoint
{\it n
} is reached.
\opt{{\tt silent
} suppresses default
363 end&end of
{\it command-list
}\cr
367 backtrace
\opt{\it n
}\par
368 bt
\opt{\it n
}&print trace of all frames in stack; or of
{\it n
}
369 frames---innermost if
{\it n
}{\tt >
0}, outermost if
{\it n
}{\tt <
0}\cr
370 frame
\opt{\it n
}&select frame number
{\it n
} or frame at address
{\it
371 n
}; if no
{\it n
}, display current frame
\cr
372 up
{\it n
}&select frame
{\it n
} frames up
\cr
373 down
{\it n
}&select frame
{\it n
} frames down
\cr
374 info frame
\opt{\it addr
}&describe selected frame, or frame at
376 info args&arguments of selected frame
\cr
377 info locals&local variables of selected frame
\cr
378 info reg
\opt{\it rn
}$
\ldots$
\par
379 info all-reg
\opt{\it rn
}®ister values
\opt{for regs
{\it rn\/
}} in
380 selected frame;
{\tt all-reg
} includes floating point
\cr
384 \sec Execution Control;
385 continue
\opt{\it count
}\par
386 c
\opt{\it count
}&continue running; if
{\it count
} specified, ignore
387 this breakpoint next
{\it count
} times
\cr
389 step
\opt{\it count
}\par
390 s
\opt{\it count
}&execute until another line reached; repeat
{\it count
} times if
392 stepi
\opt{\it count
}\par
393 si
\opt{\it count
}&step by machine instructions rather than source
396 next
\opt{\it count
}\par
397 n
\opt{\it count
}&execute next line, including any function calls
\cr
398 nexti
\opt{\it count
}\par
399 ni
\opt{\it count
}&next machine instruction rather than source
402 until
\opt{\it location
}&run until next instruction (or
{\it
404 finish&run until selected stack frame returns
\cr
405 return
\opt{\it expr
}&pop selected stack frame without executing
406 \opt{setting return value
}\cr
407 signal
{\it num
}&resume execution with signal
{\it s
} (none if
{\tt 0})
\cr
409 jump *
{\it address
}&resume execution at specified
{\it line
} number or
411 set var=
{\it expr
}&evaluate
{\it expr
} without displaying it; use for
412 altering program variables
\cr
416 print
\opt{\tt/
{\it f
}\/
} \opt{\it expr
}\par
417 p
\opt{\tt/
{\it f
}\/
} \opt{\it expr
}&show value of
{\it expr
} \opt{or
418 last value
\tt \$
} according to format
{\it f
}:
\cr
419 \qquad x&hexadecimal
\cr
420 \qquad d&signed decimal
\cr
421 \qquad u&unsigned decimal
\cr
424 \qquad a&address, absolute and relative
\cr
425 \qquad c&character
\cr
426 \qquad f&floating point
\cr
427 call
\opt{\tt /
{\it f
}\/
} {\it expr
}&like
{\tt print
} but does not display
429 x
\opt{\tt/
{\it Nuf
}\/
} {\it expr
}&examine memory at address
{\it expr
};
430 optional format spec follows slash
\cr
431 \quad {\it N
}&count of how many units to display
\cr
432 \quad {\it u
}&unit size; one of
\cr
433 &
{\tt\qquad b
}\ individual bytes
\cr
434 &
{\tt\qquad h
}\ halfwords (two bytes)
\cr
435 &
{\tt\qquad w
}\ words (four bytes)
\cr
436 &
{\tt\qquad g
}\ giant words (eight bytes)
\cr
437 \quad {\it f
}&printing format. Any
{\tt print
} format, or
\cr
438 &
{\tt\qquad s
}\ null-terminated string
\cr
439 &
{\tt\qquad i
}\ machine instructions
\cr
440 disassem
\opt{\it addr
}&display memory as machine instructions
\cr
443 \sec Automatic Display;
444 display
\opt{\tt/
\it f\/
} {\it expr
}&show value of
{\it expr
} each time
445 program stops
\opt{according to format
{\it f
}\/
}\cr
446 display&display all enabled expressions on list
\cr
447 undisplay
{\it n
}&remove number(s)
{\it n
} from list of
448 automatically displayed expressions
\cr
449 disable disp
{\it n
}&disable display for expression(s) number
{\it
451 enable disp
{\it n
}&enable display for expression(s) number
{\it
453 info display&numbered list of display expressions
\cr
459 {\it expr
}&an expression in C, C++, or Modula-
2 (including function calls), or:
\cr
460 {\it addr\/
}@
{\it len
}&an array of
{\it len
} elements beginning at
{\it
462 {\it file
}::
{\it nm
}&a variable or function
{\it nm
} defined in
{\it
464 $
\tt\
{$
{\it type
}$
\tt\
}$
{\it addr
}&read memory at
{\it addr
} as specified
466 \$&most recent displayed value
\cr
467 \$
{\it n
}&
{\it n
}th displayed value
\cr
468 \$\$&displayed value previous to \$
\cr
469 \$\$
{\it n
}&
{\it n
}th displayed value back from \$
\cr
470 \$
\_&last address examined with
{\tt x
}\cr
471 \$
\_\_&value at address \$
\_\cr
472 \$
{\it var
}&convenience variable; assign any value
\cr
474 show values
\opt{{\it n
}}&show last
10 values
\opt{or surrounding
476 show conv&display all convenience variables
\cr
480 info address
{\it s
}&show where symbol
{\it s
} is stored
\cr
481 info func
\opt{\it regex
}&show names, types of defined functions
482 (all, or matching
{\it regex
})
\cr
483 info var
\opt{\it regex
}&show names, types of global variables (all,
484 or matching
{\it regex
})
\cr
485 whatis
\opt{\it expr
}\par
486 ptype
\opt{\it expr
}&show data type of
{\it expr
} \opt{or
\tt \$
}
487 without evaluating;
{\tt ptype
} gives more detail
\cr
488 ptype
{\it type
}&describe type, struct, union, or enum
\cr
492 source
{\it script
}&read, execute GDB commands from file
{\it
496 \qquad {\it command-list
}&create new GDB command
{\it cmd
};
497 execute script defined by
{\it command-list
}\cr
498 end&end of
{\it command-list
}\cr
499 document {\it cmd
}\par
500 \qquad {\it help-text
}&create online documentation
501 for new GDB command
{\it cmd
}\cr
502 end&end of
{\it help-text
}\cr
506 handle
{\it signal
} {\it act
}&specify GDB actions for
{\it signal
}:
\cr
507 \quad print&announce signal
\cr
508 \quad noprint&be silent for signal
\cr
509 \quad stop&halt execution on signal
\cr
510 \quad nostop&do not halt execution
\cr
511 \quad pass&allow your program to handle signal
\cr
512 \quad nopass&do not allow your program to see signal
\cr
513 info signals&show table of signals, GDB action for each
\cr
516 \sec Debugging Targets;
517 target
{\it type
} {\it param
}&connect to target machine, process, or file
\cr
518 help target&display available targets
\cr
519 attach
{\it param
}&connect to another process
\cr
520 detach&release target from GDB control
\cr
524 \sec Controlling GDB;
525 set
{\it param
} {\it value
}&set one of GDB's internal parameters
\cr
526 show
{\it param
}&display current setting of parameter
\cr
527 \xtra{\rm Parameters understood by
{\tt set
} and
{\tt show
}:
}
528 \quad complaint
{\it limit
}&number of messages on unusual symbols
\cr
529 \quad confirm
{\it on/off
}&enable or disable cautionary queries
\cr
530 \quad editing
{\it on/off
}&control
{\tt readline
} command-line editing
\cr
531 \quad height
{\it lpp
}&number of lines before pause in display
\cr
532 \quad language
{\it lang
}&Language for GDB expressions (
{\tt auto
},
{\tt c
} or
534 \quad listsize
{\it n
}&number of lines shown by
{\tt list
}\cr
535 \quad prompt
{\it str
}&use
{\it str
} as GDB prompt
\cr
536 \quad radix
{\it base
}&octal, decimal, or hex number representation
\cr
537 \quad verbose
{\it on/off
}&control messages when loading
539 \quad width
{\it cpl
}&number of characters before line folded
\cr
540 \quad write
{\it on/off
}&Allow or forbid patching binary, core files
541 (when reopened with
{\tt exec
} or
{\tt core
})
543 \quad history $
\ldots$
\par
544 \quad h $
\ldots$&groups with the following options:
\cr
545 \quad h exp
{\it off/on
}&disable/enable
{\tt readline
} history expansion
\cr
546 \quad h file
{\it filename
}&file for recording GDB command history
\cr
547 \quad h size
{\it size
}&number of commands kept in history list
\cr
548 \quad h save
{\it off/on
}&control use of external file for
551 \quad print $
\ldots$
\par
552 \quad p $
\ldots$&groups with the following options:
\cr
553 \quad p address
{\it on/off
}&print memory addresses in stacks,
555 \quad p array
{\it off/on
}&compact or attractive format for
557 \quad p demangl
{\it on/off
}&source (demangled) or internal form for C++
559 \quad p asm-dem
{\it on/off
}&demangle C++ symbols in
560 machine-instruction output
\cr
561 \quad p elements
{\it limit
}&number of array elements to display
\cr
562 \quad p object
{\it on/off
}&print C++ derived types for objects
\cr
563 \quad p pretty
{\it off/on
}&struct display: compact or indented
\cr
564 \quad p union
{\it on/off
}&display of union members
\cr
565 \quad p vtbl
{\it off/on
}&display of C++ virtual function
568 show commands&show last
10 commands
\cr
569 show commands
{\it n
}&show
10 commands around number
{\it n
}\cr
570 show commands +&show next
10 commands
\cr
574 file
\opt{\it file
}&use
{\it file
} for both symbols and executable;
575 with no arg, discard both
\cr
576 core
\opt{\it file
}&read
{\it file
} as coredump; or discard
\cr
577 exec
\opt{\it file
}&use
{\it file
} as executable only; or discard
\cr
578 symbol
\opt{\it file
}&use symbol table from
{\it file
}; or discard
\cr
579 load
{\it file
}&dynamically link
{\it file\/
} and add its symbols
\cr
580 add-sym
{\it file
} {\it addr
}&read additional symbols from
{\it file
},
581 dynamically loaded at
{\it addr
}\cr
582 info files&display working files and targets in use
\cr
583 path
{\it dirs
}&add
{\it dirs
} to front of path searched for
584 executable and symbol files
\cr
585 show path&display executable and symbol file path
\cr
586 info share&list names of shared libraries currently loaded
\cr
591 dir
{\it names
}&add directory
{\it names
} to front of source path
\cr
592 dir&clear source path
\cr
593 show dir&show current source path
\cr
595 list&show next ten lines of source
\cr
596 list -&show previous ten lines
\cr
597 list
{\it lines
}&display source surrounding
{\it lines
},
599 \quad{\opt{\it file
\tt:
}\it num
}&line number
\opt{in named file
}\cr
600 \quad{\opt{\it file
\tt:
}\it function
}&beginning of function
\opt{in
602 \quad{\tt +
\it off
}&
{\it off
} lines after last printed
\cr
603 \quad{\tt -
\it off
}&
{\it off
} lines previous to last printed
\cr
604 \quad{\tt*
\it address
}&line containing
{\it address
}\cr
605 list
{\it f
},
{\it l
}&from line
{\it f
} to line
{\it l
}\cr
606 info line
{\it num
}&show starting, ending addresses of compiled code for
607 source line
{\it num
}\cr
608 info source&show name of current source file
\cr
609 info sources&list all source files in use
\cr
610 forw
{\it regex
}&search following source lines for
{\it regex
}\cr
611 rev
{\it regex
}&search preceding source lines for
{\it regex
}\cr
614 \sec GDB under GNU Emacs;
615 M-x gdb&run GDB under Emacs
\cr
616 \ctl{h
} m&describe GDB mode
\cr
617 M-s&step one line (
{\tt step
})
\cr
618 M-n&next line (
{\tt next
})
\cr
619 M-i&step one instruction (
{\tt stepi
})
\cr
620 \ctl{c
} \ctl{f
}&finish current stack frame (
{\tt finish
})
\cr
621 M-c&continue (
{\tt cont
})
\cr
622 M-u&up
{\it arg
} frames (
{\tt up
})
\cr
623 M-d&down
{\it arg
} frames (
{\tt down
})
\cr
624 \ctl{x
} \&© number from point, insert at end
\cr
625 \ctl{x
} SPC&(in source file) set break at point
\cr
629 show copying&Display GNU General Public License
\cr
630 show warranty&There is NO WARRANTY for GDB. Display full no-warranty
637 Copyright
\copyright 1991,
1992,
1993,
1998,
2000,
2010 Free Software Foundation, Inc.
638 Author: Roland H. Pesch
640 The author assumes no responsibility for any errors on this card.
642 This card may be freely distributed under the terms of the GNU
643 General Public License.
645 Please contribute to development of this card by
646 annotating it. Improvements can be sent to bug-gdb@gnu.org.
648 GDB itself is free software; you are welcome to distribute copies of
649 it under the terms of the GNU General Public License. There is
650 absolutely no warranty for GDB.