2010-03-06 Simo Melenius <simo.melenius@iki.fi>
[deliverable/binutils-gdb.git] / gdb / gdbserver / ChangeLog
1 2010-03-06 Simo Melenius <simo.melenius@iki.fi>
2
3 * linux-low.c (linux_wait_for_lwp): Fetch the regcache after
4 switching the current inferior, not before.
5
6 2010-03-01 H.J. Lu <hongjiu.lu@intel.com>
7
8 * Makefile.in (clean): Replace reg-i386.c, reg-x86-64.c,
9 reg-i386-linux.c and reg-x86-64-linux.c with i386.c, amd64.c,
10 i386-linux.c and amd64-linux.c.
11 (reg-i386.o): Removed.
12 (reg-i386.c): Likewise.
13 (reg-i386-linux.o): Likewise.
14 (reg-i386-linux.c): Likewise.
15 (reg-x86-64.o): Likewise.
16 (reg-x86-64.c): Likewise.
17 (reg-x86-64-linux.o): Likewise.
18 (reg-x86-64-linux.c): Likewise.
19 (i386.o): New.
20 (i386.c): Likewise.
21 (i386-linux.o): Likewise.
22 (i386-linux.c): Likewise.
23 (amd64.o): Likewise.
24 (amd64.c): Likewise.
25 (amd64-linux.o): Likewise.
26 (amd64-linux.c): Likewise.
27
28 * configure.srv (srv_i386_regobj): New.
29 (srv_i386_linux_regobj): Likewise.
30 (srv_amd64_regobj): Likewise.
31 (srv_amd64_linux_regobj): Likewise.
32 (srv_i386_32bit_xmlfiles): Likewise.
33 (srv_i386_64bit_xmlfiles): Likewise.
34 (srv_i386_xmlfiles): Likewise.
35 (srv_amd64_xmlfiles): Likewise.
36 (srv_i386_linux_xmlfiles): Likewise.
37 (srv_amd64_linux_xmlfiles): Likewise.
38 (i[34567]86-*-cygwin*): Set srv_regobj to $srv_i386_regobj. Set
39 srv_xmlfiles to $srv_i386_xmlfiles.
40 (i[34567]86-*-mingw32ce*): Likewise.
41 (i[34567]86-*-mingw*): Likewise.
42 (i[34567]86-*-nto*): Likewise.
43 (i[34567]86-*-linux*): Set srv_regobj to $srv_i386_linux_regobj
44 and $srv_amd64_linux_regobj. Set srv_xmlfiles to
45 $srv_i386_linux_xmlfiles and $srv_amd64_linux_xmlfiles.
46 (x86_64-*-linux*): Likewise.
47
48 * linux-x86-low.c (init_registers_x86_64_linux): Removed.
49 (init_registers_amd64_linux): New.
50 (x86_arch_setup): Replace init_registers_x86_64_linux with
51 init_registers_amd64_linux.
52
53 2010-02-23 Maxim Kuvyrkov <maxim@codesourcery.com>
54
55 * configure.ac: Check for libdl. If it is not available link against
56 static libthread_db.
57 * configure: Regenerate.
58
59 2010-02-22 Pedro Alves <pedro@codesourcery.com>
60
61 PR9605
62
63 * i386-low.c (i386_length_and_rw_bits): Throw a fatal error if
64 handing a read watchpoint.
65 (i386_low_insert_watchpoint): Read watchpoints aren't supported.
66
67 2010-02-12 Doug Evans <dje@google.com>
68
69 * linux-low.c (linux_supports_tracefork_flag): Document.
70 (linux_look_up_symbols): Add comment.
71
72 2010-02-03 H.J. Lu <hongjiu.lu@intel.com>
73
74 * regcache.c (supply_register): Clear regcache if buf is NULL.
75
76 2010-02-02 Nicolas Roche <roche@sourceware.org>
77 Joel Brobecker <brobecker@adacore.com>
78
79 * inferiors.c (find_inferior): Add function documentation.
80 (unloaded_dll): Handle the case where the unloaded dll has not
81 been previously registered in the dll list.
82
83 2010-02-01 Daniel Jacobowitz <dan@codesourcery.com>
84
85 * linux-arm-low.c (thumb_breakpoint_len): Delete.
86 (thumb2_breakpoint): New.
87 (arm_breakpoint_at): Check for Thumb-2 breakpoints.
88
89 2010-01-29 Daniel Jacobowitz <dan@codesourcery.com>
90
91 * linux-low.c (get_stop_pc): Check for SIGTRAP.
92 (linux_wait_for_event_1): Handle SIGILL and SIGSEGV as possible
93 breakpoints.
94
95 2010-01-21 Pedro Alves <pedro@codesourcery.com>
96
97 * linux-ppc-low.c (ppc_arch_setup): Adjust to regcache changes.
98
99 2010-01-21 Jan Kratochvil <jan.kratochvil@redhat.com>
100
101 * linux-s390-low.c (s390_collect_ptrace_register)
102 (s390_supply_ptrace_register): Adjust it for the new regcache parameter.
103
104 2010-01-21 Doug Evans <dje@google.com>
105
106 * linux-low.c (PTRACE_ARG3_TYPE): Change from long to void*.
107 (PTRACE_ARG4_TYPE): New macro.
108 (handle_extended_wait): Cast ptrace arg4 to PTRACE_ARG4_TYPE.
109 (linux_wait_for_event_1, linux_resume_one_lwp): Ditto.
110 (fetch_register): Cast to uintptr_t before casting to PTRACE_ARG3_TYPE.
111 (usr_store_inferior_registers): Ditto.
112 (linux_read_memory, linux_write_memory): Ditto.
113 (linux_test_for_tracefork): Ditto.
114
115 * linux-arm-low.c: Remove redundant include of gdb_proc_service.h.
116 Only include elf.h if gdb_proc_service.h didn't include linux/elf.h.
117
118 2010-01-21 Pedro Alves <pedro@codesourcery.com>
119
120 * proc-service.c (ps_lgetregs): Don't refetch registers from the
121 target.
122
123 2010-01-21 Pedro Alves <pedro@codesourcery.com>
124
125 * spu-low.c (spu_fetch_registers, spu_store_registers): Change
126 prototype to take a regcache. Adjust.
127
128 2010-01-20 Pedro Alves <pedro@codesourcery.com>
129
130 * regcache.h (struct thread_info): Forward declare.
131 (struct regcache): New.
132 (new_register_cache): Adjust prototype.
133 (get_thread_regcache): Declare.
134 (free_register_cache): Adjust prototype.
135 (registers_to_string, registers_from_string): Ditto.
136 (supply_register, supply_register_by_name, collect_register)
137 (collect_register_as_string, collect_register_by_name): Ditto.
138 * regcache.c (struct inferior_regcache_data): Delete.
139 (get_regcache): Rename to ...
140 (get_thread_regcache): ... this. Adjust. Switch inferior before
141 fetching registers.
142 (regcache_invalidate_one): Adjust.
143 (regcache_invalidate): Fix prototype.
144 (new_register_cache): Return the new register cache.
145 (free_register_cache): Change prototype.
146 (realloc_register_cache): Adjust.
147 (registers_to_string): Change prototype to take a regcache. Adjust.
148 (registers_from_string): Ditto.
149 (register_data): Ditto.
150 (supply_register): Ditto.
151 (supply_register_by_name): Ditto.
152 (collect_register): Ditto.
153 (collect_register_as_string): Ditto.
154 (collect_register_by_name): Ditto.
155 * server.c (process_serial_event): Adjust.
156 * linux-low.h (regset_fill_func, regset_store_func): Change
157 prototype.
158 (get_pc, set_pc, collect_ptrace_register, supply_ptrace_register):
159 Change prototype.
160 * linux-low.c (get_stop_pc): Adjust.
161 (check_removed_breakpoint): Adjust.
162 (linux_wait_for_event): Adjust.
163 (linux_resume_one_lwp): Adjust.
164 (fetch_register): Add regcache parameter. Adjust.
165 (usr_store_inferior_registers): Ditto.
166 (regsets_fetch_inferior_registers): Ditto.
167 (regsets_store_inferior_registers): Ditto.
168 (linux_fetch_registers, linux_store_registers): Ditto.
169 * i387-fp.c (i387_cache_to_fsave): Change prototype to take a
170 regcache. Adjust.
171 (i387_fsave_to_cache, i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto.
172 * i387-fp.h (i387_cache_to_fsave, i387_fsave_to_cache): Change
173 prototype to take a regcache.
174 (i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto.
175 * remote-utils.c (convert_ascii_to_int, outreg)
176 (prepare_resume_reply): Change prototype to take a regcache.
177 Adjust.
178 * target.h (struct target_ops) <fetch_registers, store_registers>:
179 Change prototype to take a regcache.
180 (fetch_inferior_registers, store_inferior_registers): Change
181 prototype to take a regcache. Adjust.
182 * proc-service.c (ps_lgetregs): Adjust.
183 * linux-x86-low.c (x86_fill_gregset, x86_store_gregset)
184 (x86_fill_fpregset, x86_store_fpregset, x86_fill_fpxregset)
185 (x86_store_fpxregset, x86_get_pc, x86_set_pc): Change prototype to
186 take a regcache. Adjust.
187 * linux-arm-low.c (arm_fill_gregset, arm_store_gregset)
188 (arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset)
189 (arm_store_vfpregset, arm_get_pc, arm_set_pc):
190 (arm_breakpoint_at): Change prototype to take a regcache. Adjust.
191 * linux-cris-low.c (cris_get_pc, cris_set_pc)
192 (cris_cannot_fetch_register):
193 (cris_breakpoint_at): Change prototype to take a regcache.
194 Adjust.
195 * linux-crisv32-low.c (cris_get_pc, cris_set_pc,
196 cris_reinsert_addr, cris_write_data_breakpoint): Change prototype
197 to take a regcache. Adjust.
198 (cris_breakpoint_at, cris_insert_point, cris_remove_point):
199 Adjust.
200 * linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Change prototype to
201 take a regcache. Adjust.
202 * linux-m68k-low.c (m68k_fill_gregset, m68k_store_gregset)
203 (m68k_fill_fpregset, m68k_store_fpregset, m68k_get_pc,
204 (m68k_set_pc): Change prototype to take a regcache. Adjust.
205 * linux-mips-low.c (mips_get_pc):
206 (mips_set_pc): Change prototype to take a regcache. Adjust.
207 (mips_reinsert_addr): Adjust.
208 (mips_collect_register): Change prototype to take a regcache.
209 Adjust.
210 (mips_supply_register):
211 (mips_collect_register_32bit, mips_supply_register_32bit)
212 (mips_fill_gregset, mips_store_gregset, mips_fill_fpregset)
213 (mips_store_fpregset): Ditto.
214 * linux-ppc-low.c (ppc_supply_ptrace_register, ppc_supply_ptrace_register):
215 Ditto.
216 (parse_spufs_run): Adjust.
217 (ppc_get_pc, ppc_set_pc, ppc_fill_gregset, ppc_fill_vsxregset)
218 (ppc_store_vsxregset, ppc_fill_vrregset, ppc_store_vrregset)
219 (ppc_fill_evrregset, ppc_store_evrregset): Change prototype to
220 take a regcache. Adjust.
221 * linux-s390-low.c (s390_collect_ptrace_register)
222 (s390_supply_ptrace_register, s390_fill_gregset, s390_get_pc)
223 (s390_set_pc): Change prototype to take a regcache. Adjust.
224 (s390_arch_setup): Adjust.
225 * linux-sh-low.c (sh_get_pc, sh_breakpoint_at)
226 (sh_fill_gregset): Change prototype to take a regcache. Adjust.
227 * linux-sparc-low.c (sparc_fill_gregset_to_stack)
228 (sparc_fill_gregset, sparc_store_gregset_from_stack)
229 (sparc_store_gregset, sparc_get_pc): Change prototype to take a
230 regcache. Adjust.
231 (sparc_breakpoint_at): Adjust.
232 * linux-xtensa-low.c (xtensa_fill_gregset):
233 (xtensa_store_gregset):
234 (xtensa_fill_xtregset, xtensa_store_xtregset, xtensa_get_pc)
235 (xtensa_set_pc): Change prototype to take a regcache. Adjust.
236 * nto-low.c (nto_fetch_registers, nto_store_registers): Change
237 prototype to take a regcache. Adjust.
238 * win32-arm-low.c (arm_fetch_inferior_register)
239 (arm_store_inferior_register): Change prototype to take a
240 regcache. Adjust.
241 * win32-i386-low.c (i386_fetch_inferior_register)
242 (i386_store_inferior_register): Change prototype to take a
243 regcache. Adjust.
244 * win32-low.c (child_fetch_inferior_registers)
245 (child_store_inferior_registers): Change prototype to take a
246 regcache. Adjust.
247 (win32_wait): Adjust.
248 (win32_fetch_inferior_registers): Change prototype to take a
249 regcache. Adjust.
250 (win32_store_inferior_registers): Adjust.
251 * win32-low.h (struct win32_target_ops) <fetch_inferior_register,
252 store_inferior_register>: Change prototype to take a regcache.
253
254 2010-01-20 Doug Evans <dje@google.com>
255
256 * linux-low.c (linux_create_inferior): Wrap use of __SIGRTMIN in
257 #ifdef.
258 (linux_wait_for_event1, linux_init_signals): Ditto.
259 (W_STOPCODE): Provide definition if missing.
260
261 2010-01-13 Vladimir Prus <vladimir@codesourcery.com>
262
263 * linux-low.c (linux_core_of_thread): New.
264 (compare_ints, show_process, list_threads): New.
265 (linux_qxfer_osdata): Report threads and cores.
266 (linux_target_op): Register linux_core_of_thread.
267 * remote-utils.c (prepare_resume_reply): Report the core.
268 (buffer_xml_printf): Support %d specifier.
269 * server.c (handle_threads_qxfer_proper, handle_threads_qxfer):
270 New.
271 (handle_query): Handle qXfer:threads. Announce availability
272 thereof.
273 * target.h (struct target_ops): New field core_of_thread.
274
275 2010-01-04 Ulrich Weigand <uweigand@de.ibm.com>
276
277 * Makefile.in (clean): Remove new generated files.
278 (reg-s390.o, reg-s390.c): Remove rules.
279 (reg-s390x.o, reg-s390x.c): Likewise.
280 (s390-linux32.o, s390-linux32.c): Add rules.
281 (s390-linux64.o, s390-linux64.c): Likewise.
282 (s390x-linux64.o, s390x-linux64.c): Likewise.
283 * configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
284 * linux-s390-low.c: Include <elf.h>.
285 (HWCAP_S390_HIGH_GPRS): Define if undefined.
286 (init_registers_s390): Remove prototype.
287 (init_registers_s390x): Likewise.
288 (init_registers_s390_linux32): Add prototype.
289 (init_registers_s390_linux64): Likewise.
290 (init_registers_s390x_linux64): Likewise.
291 (s390_num_regs_3264): New define.
292 (s390_regmap_3264): New global variable.
293 (s390_cannot_fetch_register): Remove obsolete check.
294 (s390_cannot_store_register): Likewise.
295 (s390_collect_ptrace_register): Handle upper/lower register halves.
296 (s390_supply_ptrace_register): Likewise.
297 (s390_fill_gregset): Update to register number changes.
298 (s390_get_hwcap): New routine.
299 (s390_arch_setup): Detect 32-bit process running on 64-bit system.
300 Install appropriate regmap and register set.
301
302 2010-01-01 Joel Brobecker <brobecker@adacore.com>
303
304 * server.c (gdbserver_version): Update copyright year to 2010.
305 * gdbreplay.c (gdbreplay_version): Likewise.
306
307 2009-12-28 Doug Evans <dje@google.com>
308
309 * linux-low.c: Delete inclusion of ansidecl.h, elf/common.h,
310 elf/external.h. Include <elf.h> instead but only if necessary.
311
312 2009-12-28 Pedro Alves <pedro@codesourcery.com>
313
314 * linux-low.c (linux_remove_process): Remove `detaching'
315 parameter. Don't release/detach from thread_db here.
316 (linux_kill): Release/detach from thread_db here, ...
317 (linux_detach): ... and here, before actually detaching.
318 (linux_wait_1): ... and here, when a process exits.
319 * thread-db.c (any_thread_of): New.
320 (thread_db_free): Switch the current inferior to a thread of the
321 passed in process.
322
323 2009-12-21 Doug Evans <dje@google.com>
324
325 * linux-x86-low.c: Delete outdated comment about Elf32_Phdr.
326
327 * linux-low.c (kill_lwp): Use __NR_tkill instead of SYS_tkill.
328 Move definition of tkill_failed to ifdef __NR_tkill to avoid gcc
329 warning ifndef __NR_tkill. Move setting of errno there too.
330 Delete unnecessary resetting of errno after syscall.
331 Minor comment changes to match gdb/linux-nat.c:kill_lwp.
332
333 * configure.ac: Check for dladdr.
334 * config.in: Regenerate.
335 * configure: Regenerate.
336 * thread-db.c (dladdr_to_soname): Only define ifdef HAVE_DLADDR.
337 (try_thread_db_load): Update.
338
339 * linux-low.c (my_waitpid): Delete unnecessary prototype.
340
341 2009-12-18 Doug Evans <dje@google.com>
342
343 * event-loop.c: Include unistd.h if it exists.
344
345 * linux-low.c (my_waitpid): Move definition away from being in
346 between linux_tracefork_child/linux_test_for_tracefork.
347
348 * gdb_proc_service.h (psaddr_t): Fix type.
349 * thread-db.c (thread_db_info.td_thr_tls_get_addr_p): Fix
350 signature to match glibc.
351
352 2009-12-16 Doug Evans <dje@google.com>
353
354 * linux-low.c (linux_read_memory): Fix argument to read.
355
356 2009-11-26 Pedro Alves <pedro@codesourcery.com>
357
358 * win32-low.c (get_child_debug_event): On EXIT_THREAD_DEBUG_EVENT
359 events, don't leave current_inferior pointing at null.
360
361 2009-11-26 Pedro Alves <pedro@codesourcery.com>
362
363 * win32-low.c (LOG): Delete.
364 (OUTMSG): Output to stderr.
365 (OUTMSG2): Conditionalize on `debug_threads' variable, instead of
366 on compile time LOG macro.
367 (win32_wait): Fix debug output.
368
369 2009-11-26 Pedro Alves <pedro@codesourcery.com>
370
371 * win32-low.c (win32_add_one_solib): If the dll name is
372 "ntdll.dll", prepend the system directory to the dll path.
373
374 2009-11-17 Daniel Jacobowitz <dan@codesourcery.com>
375
376 * m68k-tdep.c (m68k_gdbarch_init): Reuse previous initialization.
377
378 2009-11-17 Nathan Sidwell <nathan@codesourcery.com>
379 Vladimir Prus <vladimir@codesourcery.com>
380
381 * Makefile.in (reg-cf.o, reg-cf.c): New targets.
382 * configure.ac: Check for __mcoldfire__ and set
383 gdb_cv_m68k_is_coldfire.
384 * configure.srv: Use gdb_cv_m68k_is_coldfire to select between
385 reg-cf.o and reg-m68k.o.
386 * configure: Regenerated.
387
388 2009-11-16 Pedro Alves <pedro@codesourcery.com>
389
390 * linux-low.c (linux_remove_process): Add `detaching' parameter.
391 Pass it to thread_db_free.
392 (linux_kill, linux_detach, linux_wait_1): Adjust to pass the
393 proper `detaching' argument to linux_remove_process.
394 * linux-low.h (thread_db_free): Add `detaching' parameter.
395 * thread-db.c (thread_db_init): Pass false as `detaching' argument
396 to thread_db_free.
397 (thread_db_free): Add `detaching' parameter. Only
398 call td_ta_clear_event if detaching from process.
399
400 2009-11-12 Maxim Kuvyrkov <maxim@codesourcery.com>
401
402 * thread-db.c (thread_db_free): Fix typo.
403
404 2009-11-11 Paul Pluzhnikov <ppluzhnikov@google.com>
405
406 PR gdb/10838
407 * thread-db.c (thread_db_free): Call td_ta_clear_event.
408
409 2009-11-03 Nathan Sidwell <nathan@codesourcery.com>
410
411 * configure.ac (i[34567]86-*): Check if we're targetting x86-64
412 with an i686 compiler.
413 * configure.srv (i[34567]86-*-linux*): Pull in x86-64 handling if
414 needed.
415 * configure: Rebuilt.
416
417 2009-10-29 Sandra Loosemore <sandra@codesourcery.com>
418
419 PR gdb/10783
420
421 * server.c (handle_search_memory_1): Correct read_addr initialization
422 in loop for searching subsequent chunks.
423
424 2009-10-29 Paul Pluzhnikov <ppluzhnikov@google.com>
425
426 * configure.ac: New --with-libthread-db option.
427 * thread-db.c: Allow direct dependence on libthread_db.
428 (thread_db_free): Adjust.
429 * config.in: Regenerate.
430 * configure: Likewise.
431
432 2009-10-28 Paul Pluzhnikov <ppluzhnikov@google.com>
433
434 PR gdb/10757
435 * thread-db.c (attach_thread): New function.
436 (maybe_attach_thread): Return success/failure.
437 (find_new_threads_callback): Adjust.
438 (thread_db_find_new_threads): Loop until no new threads.
439
440 2009-10-13 Pedro Alves <pedro@codesourcery.com>
441
442 * proc-service.c (ps_lgetregs): Formatting.
443
444 2009-10-08 Paul Pluzhnikov <ppluzhnikov@google.com>
445
446 * acinclude.m4: (SRV_CHECK_THREAD_DB, SRV_CHECK_TLS_GET_ADDR): Remove.
447 * configure.ac: Adjust.
448 * linux-low.h (struct process_info_private): Move members to struct
449 thread_db.
450 (thread_db_free, thread_db_handle_monitor_command): New prototype.
451 * linux-low.c (linux_remove_process): Adjust.
452 (linux_wait_for_event_1, linux_look_up_symbols): Likewise.
453 * server.c (handle_query): Move code ...
454 (handle_monitor_command): ... here. New function.
455 * target.h (struct target_ops): New member.
456 * thread-db.c (struct thread_db): New.
457 (libthread_db_search_path): New variable.
458 (thread_db_create_event, thread_db_enable_reporting)
459 (find_one_thread, maybe_attach_thread, find_new_threads_callback)
460 (thread_db_find_new_threads, (thread_db_get_tls_address): Adjust.
461 (try_thread_db_load_1, dladdr_to_soname): New functions.
462 (try_thread_db_load, thread_db_load_search): New functions.
463 (thread_db_init): Search for libthread_db.
464 (thread_db_free): New function.
465 (thread_db_handle_monitor_command): Likewise.
466 * config.in: Regenerate.
467 * configure: Regenerate.
468
469 2009-09-27 Ulrich Weigand <uweigand@de.ibm.com>
470
471 * spu-low.c (spu_kill): Wait for inferior to terminate.
472 Call clear_inferiors.
473 (spu_detach): Call clear_inferiors.
474
475 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
476
477 * aclocal.m4: Regenerate.
478 * config.in: Likewise.
479 * configure: Likewise.
480
481 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
482
483 * linux-ppc-low.c (INSTR_SC, NR_spu_run): Define.
484 (parse_spufs_run): New function.
485 (ppc_get_pc, ppc_set_pc): Detect and handle SPU PC.
486 (ppc_breakpoint_at): Handle SPU breakpoints.
487
488 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
489
490 * linux-low.c: Include <sys/stat.h> and <sys/vfs.h>.
491 (SPUFS_MAGIC): Define.
492 (spu_enumerate_spu_ids): New function.
493 (linux_qxfer_spu): New function.
494 (linux_target_ops): Install linux_qxfer_spu.
495
496 2009-07-31 Ulrich Weigand <uweigand@de.ibm.com>
497
498 * configure.srv (powerpc*-*-linux*): Add powerpc-cell32l.o
499 and powerpc-cell64l.o to srv_regobj. Add rs6000/powerpc-cell32l.xml
500 and rs6000/powerpc-cell64l.xml to srv_xmlfiles.
501 * Makefile.in (powerpc-cell32l.o, powerpc-cell32l.c): New rules.
502 (powerpc-cell64l.o, powerpc-cell64l.c): Likewise.
503 (clean): Handle powerpc-cell32l.c and powerpc-cell64l.c.
504 * linux-ppc-low.c (PPC_FEATURE_CELL): Define.
505 (init_registers_powerpc_cell32l): Add prototype.
506 (init_registers_powerpc_cell64l): Likewise.
507 (ppc_arch_setup): Detect Cell/B.E. architecture.
508
509 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
510
511 * Makefile.in (datarootdir): New variable.
512
513 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
514
515 * linux-low.c (linux_write_memory): Update debugging output.
516 * Makefile.in (clean): Add new descriptions.
517 (arm-with-vfpv2.o, arm-with-vfpv2.c, arm-with-vfpv3.o)
518 (arm-with-vfpv3.c, arm-with-neon.o, arm-with-neon.c): New rules.
519 * configure.srv: Add new files for arm*-*-linux*.
520 * linux-arm-low.c: Add new declarations.
521 (PTRACE_GETVFPREGS, PTRACE_SETVFPREGS): Define if undefined.
522 (arm_hwcap, HWCAP_VFP, HWCAP_IWMMXT, HWCAP_NEON, HWCAP_VFPv3)
523 (HWCAP_VFPv3D16): New.
524 (arm_fill_wmmxregset, arm_store_wmmxregset): Check HWCAP_IWMMXT
525 instead of __IWMMXT__.
526 (arm_fill_vfpregset, arm_store_vfpregset, arm_get_hwcap)
527 (arm_arch_setup): New.
528 (target_regsets): Remove #ifdef. Add VFP regset.
529 (the_low_target): Use arm_arch_setup.
530
531 2009-07-28 Daniel Jacobowitz <dan@codesourcery.com>
532
533 * linux-low.c (linux_kill_one_lwp): Adjust kernel workaround to skip
534 the main thread again.
535
536 2009-07-06 Aleksandar Ristovski <aristovski@qnx.com>
537
538 Adding Neutrino gdbserver.
539 * configure: Regenerated.
540 * configure.ac: Add case for srv_qnx and set LIBS accordingly.
541 * configure.srv (i[34567]86-*-nto*): New target.
542 * nto-low.c, nto-low.h, nto-x86-low.c: New files.
543 * remote-utils.c [__QNX__]: Include sys/iomgr.h
544 (nto_comctrl) [__QNX__]: New function.
545 (enable_async_io, disable_async_io) [__QNX__]: Call nto_comctrl.
546
547 2009-07-05 Danny Backx <dannybackx@users.sourceforge.net>
548
549 * configure.srv (i[34567]86-*-mingw32ce*): Add i386-low.o to
550 srv_tgtobj.
551
552 2009-07-04 Danny Backx <dannybackx@users.sourceforge.net>
553 Pedro Alves <pedro@codesourcery.com>
554
555 * win32-i386-low.c (i386_get_thread_context): Handle systems that
556 don't support CONTEXT_EXTENDED_REGISTERS.
557 (i386_win32_breakpoint, i386_win32_breakpoint_len): New.
558 (the_low_target): Install them.
559 * win32-low.c (get_child_debug_event): Handle WaitForDebugEvent
560 failing with ERROR_PIPE_NOT_CONNECTED.
561
562 2009-06-30 Doug Evans <dje@google.com>
563 Pierre Muller <muller@ics.u-strasbg.fr>
564
565 Add h/w watchpoint support to x86-linux, win32-i386.
566 * Makefile.in (SFILES): Add i386-low.c
567 (i386_low_h): Define.
568 (i386-low.o): Add dependencies.
569 (linux-x86-low.o): Add i386-low.h dependency.
570 (win32-i386-low.o): Ditto.
571 * i386-low.c: New file.
572 * i386-low.h: New file.
573 * configure.srv (i[34567]86-*-cygwin*): Add i386-low.o to srv_tgtobj.
574 (i[34567]86-*-linux*, i[34567]86-*-mingw*, x86_64-*-linux*): Ditto.
575 * linux-low.c (linux_add_process): Initialize arch_private.
576 (linux_remove_process): Free arch_private.
577 (add_lwp): Initialize arch_private.
578 (delete_lwp): Free arch_private.
579 (linux_resume_one_lwp): Call the_low_target.prepare_to_resume if
580 provided.
581 * linux-low.h (process_info_private): New member arch_private.
582 (lwp_info): New member arch_private.
583 (linux_target_ops): New members new_process, new_thread,
584 prepare_to_resume.
585 (ptid_of): New macro.
586 * linux-x86-low.c: Include stddef.h, i386-low.h.
587 (arch_process_info): New struct.
588 (arch_lwp_info): New struct.
589 (x86_linux_dr_get, x86_linux_dr_set): New functions.
590 (i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
591 (i386_dr_low_get_status): New function.
592 (x86_insert_point, x86_remove_point): New functions.
593 (x86_stopped_by_watchpoint): New function.
594 (x86_stopped_data_address): New function.
595 (x86_linux_new_process, x86_linux_new_thread): New functions.
596 (x86_linux_prepare_to_resume): New function.
597 (the_low_target): Add entries for insert_point, remove_point,
598 stopped_by_watchpoint, stopped_data_address, new_process, new_thread,
599 prepare_to_resume.
600 * server.c (debug_hw_points): New global.
601 (monitor_show_help): Document set debug-hw-points.
602 (handle_query): Process "set debug-hw-points".
603 * server.h (debug_hw_points): Declare.
604 (paddress): Declare.
605 * utils.c (NUMCELLS, CELLSIZE): New macros.
606 (get_sell, xsnprintf, paddress): New functions.
607 * win32-arm-low.c (the_low_target): Add entries for insert_point,
608 remove_point, stopped_by_watchpoint, stopped_data_address.
609 * win32-i386-low.c: Include i386-low.h.
610 (debug_reg_state): Replaces dr.
611 (i386_dr_low_set_addr, i386_dr_low_set_control): New functions.
612 (i386_dr_low_get_status): New function.
613 (i386_insert_point, i386_remove_point): New functions.
614 (i386_stopped_by_watchpoint): New function.
615 (i386_stopped_data_address): New function.
616 (i386_initial_stuff): Update.
617 (get_thread_context,set_thread_context,i386_thread_added): Update.
618 (the_low_target): Add entries for insert_point,
619 remove_point, stopped_by_watchpoint, stopped_data_address.
620 * win32-low.c (win32_insert_watchpoint): New function.
621 (win32_remove_watchpoint): New function.
622 (win32_stopped_by_watchpoint): New function.
623 (win32_stopped_data_address): New function.
624 (win32_target_ops): Add entries for insert_watchpoint,
625 remove_watchpoint, stopped_by_watchpoint, stopped_data_address.
626 * win32-low.h (win32_target_ops): New members insert_point,
627 remove_point, stopped_by_watchpoint, stopped_data_address.
628
629 2009-06-25 Pedro Alves <pedro@codesourcery.com>
630
631 * server.c (process_serial_event): Re-return unsupported, not
632 error, if the type isn't recognized. Re-allow supporting only
633 insert or remove packets. Also call require_running for
634 breakpoints. Add missing break statement to default case. Tidy.
635 * target.h (struct target_ops): Rename insert_watchpoint to
636 insert_point, and remove_watchpoint to remove_point.
637
638 * linux-low.h (struct linux_target_ops): Likewise.
639 * linux-low.c (linux_insert_watchpoint): Rename to ...
640 (linux_insert_point): ... this. Adjust.
641 (linux_remove_watchpoint): Rename to ...
642 (linux_remove_point): ... this. Adjust.
643 (linux_target_ops): Adjust.
644 * linux-crisv32-low.c (cris_insert_watchpoint): Rename to ...
645 (cris_insert_point): ... this.
646 (cris_remove_watchpoint): Rename to ...
647 (cris_remove_point): ... this.
648 (the_low_target): Adjust.
649
650 2009-06-24 Pierre Muller <muller@ics.u-strasbg.fr>
651
652 * server.c (handle_v_kill): Pass signal_pid to
653 kill_inferior if multi_process is zero.
654
655 2009-06-23 Aleksandar Ristovski <aristovski@qnx.com>
656
657 * server.c (process_serial_event): Add support for Z0 and Z1 packet.
658 * target.h (target_ops): Comment for *_watchpoint to make it clear
659 the functions can get types '0' and '1'.
660
661 2009-06-22 Aleksandar Ristovski <aristovski@qnx.com>
662
663 * linux-low.c (usr_fetch_inferior_registers): Remove check for regno 0.
664 * proc-service.c (ps_lgetregs): Pass -1 to fetch all registers.
665 * regcache.c (get_regcache): Likewise.
666 * spu-low.c (spu_fetch_registers): Remove 0 to -1 conversion.
667 * win32-low.c (child_fetch_inferior_registers): Remove check for
668 regno 0.
669
670 2009-06-19 Aleksandar Ristovski <aristovski@qnx.com>
671 Pedro Alves <pedro@codesourcery.com>
672
673 * target.h (struct target_ops) <supports_multi_process>: New
674 callback.
675 (target_supports_multi_process): New.
676 * server.c (handle_query): Even if GDB reports support, only
677 enable multi-process if the target also supports it. Report
678 multi-process support only if the target backend supports it.
679 * linux-low.c (linux_supports_multi_process): New function.
680 (linux_target_ops): Install it as target_supports_multi_process
681 callback.
682
683 2009-05-24 Doug Evans <dje@google.com>
684
685 Global renaming of find_thread_pid to find_thread_ptid.
686 * server.h (find_thread_ptid): Renamed from find_thread_pid.
687 * inferiors.c (find_thread_ptid): Renamed from find_thread_pid.
688 All callers updated.
689
690 * linux-low.c (handle_extended_wait): Use linux_resume_one_lwp
691 to resume the newly created thread, don't call ptrace (PTRACE_CONT)
692 directly.
693
694 * linux-low.c (get_stop_pc): Print pc if debug_threads.
695 (check_removed_breakpoint, linux_wait_for_lwp): Ditto.
696 (linux_resume_one_lwp): Ditto.
697
698 2009-05-23 Doug Evans <dje@google.com>
699
700 * linux-low.c (linux_resume_one_lwp): Change type of first arg
701 from struct inferior_list_entry * to struct lwp_info *.
702 All callers updated.
703
704 2009-05-13 Doug Evans <dje@google.com>
705
706 * linux-x86-low.c: Don't include assert.h.
707 (x86_siginfo_fixup): Use fatal, not assert.
708 (x86_arch_setup): Fix comment.
709
710 2009-05-12 Doug Evans <dje@google.com>
711
712 Biarch support for i386/amd64 gdbserver.
713 * Makefile.in (SFILES): Remove linux-i386-low.c, linux-x86-64-low.c.
714 Add linux-x86-low.c.
715 (linux-i386-low.o, linux-x86-64-low.o): Delete.
716 (linux-x86-low.o): Add.
717 * linux-x86-64-low.c: Delete.
718 * linux-i386-low.c: Delete.
719 * linux-x86-low.c: New file.
720 * configure.srv (i?86-linux srv_tgtobj): Replace linux-i386-low.o with
721 linux-x86-low.o.
722 (x86_64-linux srv_tgtobj): Replace linux-x86-64-low.o with
723 linux-x86-low.o.
724 (x86_64-linux srv_regobj): Add reg-i386-linux.o.
725 * linux-low.c: Include ansidecl.h, elf/common.h, elf/external.h.
726 (linux_child_pid_to_exec_file): New function.
727 (elf_64_header_p, elf_64_file_p): New functions.
728 (siginfo_fixup): New function.
729 (linux_xfer_siginfo): New local inf_siginfo. Call siginfo_fixup to
730 give target a chance to convert layout.
731 * linux-low.h (linux_target_ops): New member siginfo_fixup.
732 (linux_child_pid_to_exec_file, elf_64_file_p): Declare.
733
734 2009-05-07 Doug Evans <dje@google.com>
735
736 * linux-low.c (regsets_fetch_inferior_registers): Fix memory leak.
737 (regsets_store_inferior_registers): Ditto.
738
739 2009-05-06 Pedro Alves <pedro@codesourcery.com>
740
741 PR server/10048
742
743 * linux-low.c (must_set_ptrace_flags): Delete.
744 (linux_create_inferior): Set `lwp->must_set_ptrace_flags' instead
745 of the global.
746 (linux_attach_lwp_1): Don't set PTRACE_SETOPTIONS here. Set
747 `lwp->must_set_ptrace_flags' instead.
748 (linux_wait_for_event_1): Set ptrace options here.
749 (linux_wait_1): ... not here.
750
751 2009-04-30 Doug Evans <dje@google.com>
752
753 * inferiors.c (started_inferior_callback): New function.
754 (attached_inferior_callback): New function.
755 (have_started_inferiors_p, have_attached_inferiors_p): New functions.
756 * server.c (print_started_pid, print_attached_pid): New functions.
757 (detach_or_kill_for_exit): New function.
758 (main): Call it instead of for_each_inferior (kill_inferior_callback).
759 * server.h (have_started_inferiors_p): Declare.
760 (have_attached_inferiors_p): Declare.
761
762 * inferiors.c (remove_process): Fix memory leak, free process.
763 * linux-low.c (linux_remove_process): New function.
764 (linux_kill): Call it instead of remove_process.
765 (linux_detach, linux_wait_1): Ditto.
766
767 2009-04-19 Danny Backx <dannybackx@users.sourceforge.net>
768
769 * configure.srv: Add x86 Windows CE target.
770
771 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
772
773 * inferiors.c (get_thread_process): Make global.
774 * server.h (get_thread_process): Add prototype.
775 * thread-db.c (find_one_thread): Use get_thread_process
776 instead of current_process.
777 (thread_db_get_tls_address): Do not crash if called when
778 thread layer is not yet initialized.
779
780 2009-04-03 Ulrich Weigand <uweigand@de.ibm.com>
781
782 * remote-utils.c (prepare_resume_reply): Null-terminate packet.
783 * spu-low.c (current_tid): Rename to ...
784 (current_ptid): ... this.
785 (fetch_ppc_register, fetch_ppc_memory, store_ppc_memory,
786 spu_proc_xfer_spu, spu_resume, spu_request_interrupt): Use
787 ptid_get_lwp (current_ptid) instead of current_tid.
788 (spu_kill, spu_detach, spu_join, spu_wait): Use pid argument
789 instead of current_tid. Use find_process_pid to verify pid
790 argument is valid. Pass proper argument to remove_process.
791 (spu_thread_alive): Compare current_ptid instead of current_tid.
792 (spu_resume): Likewise.
793
794 2009-04-02 Pedro Alves <pedro@codesourcery.com>
795
796 * linux-low.c (usr_store_inferior_registers): Declare local `pid'
797 variable.
798
799 2009-04-01 Pedro Alves <pedro@codesourcery.com>
800
801 Implement the multiprocess extensions, and add linux multiprocess
802 support.
803
804 * server.h (ULONGEST): Declare.
805 (struct ptid, ptid_t): New.
806 (minus_one_ptid, null_ptid): Declare.
807 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
808 (ptid_get_tid, ptid_equal, ptid_is_pid): Declare.
809 (struct inferior_list_entry): Change `id' type from unsigned from
810 to ptid_t.
811 (struct sym_cache, struct breakpoint, struct
812 process_info_private): Forward declare.
813 (struct process_info): Declare.
814 (current_process): Declare.
815 (all_processes): Declare.
816 (initialize_inferiors): Declare.
817 (add_thread): Adjust to use ptid_t.
818 (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto.
819 (add_process, remove_process, find_thread_pid): Declare.
820 (find_inferior_id): Adjust to use ptid_t.
821 (cont_thread, general_thread, step_thread): Change type to ptid_t.
822 (multi_process): Declare.
823 (push_event): Adjust to use ptid_t.
824 (read_ptid, write_ptid): Declare.
825 (prepare_resume_reply): Adjust to use ptid_t.
826 (clear_symbol_cache): Declare.
827 * inferiors.c (all_processes): New.
828 (null_ptid, minus_one_ptid): New.
829 (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp)
830 (ptid_get_tid, ptid_equal, ptid_is_pid): New.
831 (add_thread): Change unsigned long to ptid. Remove gdb_id
832 parameter. Adjust.
833 (thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid.
834 (gdb_id_to_thread): Rename to ...
835 (find_thread_pid): ... this. Change unsigned long to ptid.
836 (gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid.
837 (loaded_dll, pull_pid_from_list): Adjust.
838 (add_process, remove_process, find_process_pid)
839 (get_thread_process, current_process, initialize_inferiors): New.
840 * target.h (struct thread_resume) <thread>: Change type to ptid_t.
841 (struct target_waitstatus) <related_pid>: Ditto.
842 (struct target_ops) <kill, detach>: Add `pid' argument. Change
843 return type to int.
844 (struct target_ops) <join>: Add `pid' argument.
845 (struct target_ops) <thread_alive>: Change pid's type to ptid_t.
846 (struct target_ops) <wait>: Add `ptid' field. Change return type
847 to ptid.
848 (kill_inferior, detach_inferior, join_inferior): Add `pid' argument.
849 (mywait): Add `ptid' argument. Change return type to ptid_t.
850 (target_pid_to_str): Declare.
851 * target.c (set_desired_inferior): Adjust to use ptids.
852 (mywait): Add new `ptid' argument. Adjust.
853 (target_pid_to_str): New.
854 * mem-break.h (free_all_breakpoints): Declare.
855 * mem-break.c (breakpoints): Delelete.
856 (set_breakpoint_at, delete_breakpoint, find_breakpoint_at)
857 (check_mem_read, check_mem_write, delete_all_breakpoints): Adjust
858 to use per-process breakpoint list.
859 (free_all_breakpoints): New.
860 * remote-utils.c (struct sym_cache) <name>: Drop `const'.
861 (symbol_cache, all_symbols_looked_up): Delete.
862 (hexchars): New.
863 (ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one,
864 read_ptid): New.
865 (prepare_resume_reply): Change ptid argument's type from unsigned
866 long to ptid_t. Adjust. Implement W;process and X;process.
867 (free_sym_cache, clear_symbol_cache): New.
868 (look_up_one_symbol): Adjust to per-process symbol cache. *
869 * server.c (cont_thread, general_thread, step_thread): Change type
870 to ptid_t.
871 (attached): Delete.
872 (multi_process): New.
873 (last_ptid): Change type to ptid_t.
874 (struct vstop_notif) <ptid>: Change type to ptid_t.
875 (queue_stop_reply, push_event): Change `ptid' argument's type to
876 ptid_t.
877 (discard_queued_stop_replies): Add `pid' argument.
878 (start_inferior): Adjust to use ptids. Adjust to mywait interface
879 changes. Don't reference the `attached' global.
880 (attach_inferior): Adjust to mywait interface changes.
881 (handle_query): Adjust to use ptids. Parse GDB's qSupported
882 features. Handle and report "multiprocess+". Handle
883 "qAttached:PID".
884 (handle_v_cont): Adjust to use ptids. Adjust to mywait interface
885 changes.
886 (handle_v_kill): New.
887 (handle_v_stopped): Adjust to use target_pid_to_str.
888 (handle_v_requests): Allow multiple attaches and runs when
889 multiprocess extensions are in effect. Handle "vKill".
890 (myresume): Adjust to use ptids.
891 (queue_stop_reply_callback): Add `arg' parameter. Handle it.
892 (handle_status): Adjust to discard_queued_stop_replies interface
893 change.
894 (first_thread_of, kill_inferior_callback)
895 (detach_or_kill_inferior_callback, join_inferiors_callback): New.
896 (main): Call initialize_inferiors. Adjust to use ptids, killing
897 and detaching from all inferiors. Handle multiprocess packet
898 variants.
899 * linux-low.h: Include gdb_proc_service.h.
900 (struct process_info_private): New.
901 (struct linux_target_ops) <pid_of>: Use ptid_get_pid.
902 <lwpid_of>: Use ptid_get_lwp.
903 (get_lwp_thread): Adjust.
904 (struct lwp_info): Add `dead' member.
905 (find_lwp_pid): Declare.
906 * linux-low.c (thread_db_active): Delete.
907 (new_inferior): Adjust comment.
908 (inferior_pid): Delete.
909 (linux_add_process): New.
910 (handle_extended_wait): Adjust.
911 (add_lwp): Change unsigned long to ptid.
912 (linux_create_inferior): Add process to processes table. Adjust
913 to use ptids. Don't set new_inferior here.
914 (linux_attach_lwp): Rename to ...
915 (linux_attach_lwp_1): ... this. Add `initial' argument. Handle
916 it. Adjust to use ptids.
917 (linux_attach_lwp): New.
918 (linux_attach): Add process to processes table. Don't set
919 new_inferior here.
920 (struct counter): New.
921 (second_thread_of_pid_p, last_thread_of_process_p): New.
922 (linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to
923 multiple processes.
924 (linux_kill): Add `pid' argument. Handle it. Adjust to multiple
925 processes. Remove process from process table.
926 (linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust
927 to multiple processes.
928 (any_thread_of): New.
929 (linux_detach): Add `pid' argument, and handle it. Remove process
930 from processes table.
931 (linux_join): Add `pid' argument. Handle it.
932 (linux_thread_alive): Change unsighed long argument to ptid_t.
933 Consider dead lwps as not being alive.
934 (status_pending_p): Rename `dummy' argument to `arg'. Filter out
935 threads we're not interested in.
936 (same_lwp, find_lwp_pid): New.
937 (linux_wait_for_lwp): Change `pid' argument's type from int to
938 ptid_t. Adjust.
939 (linux_wait_for_event): Rename to ...
940 (linux_wait_for_event_1): ... this. Change `pid' argument's type
941 from int to ptid_t. Adjust.
942 (linux_wait_for_event): New.
943 (linux_wait_1): Add `ptid' argument. Change return type to
944 ptid_t. Adjust. Use last_thread_of_process_p. Remove processes
945 that exit from the process table.
946 (linux_wait): Add `ptid' argument. Change return type to ptid_t.
947 Adjust.
948 (mark_lwp_dead): New.
949 (wait_for_sigstop): Adjust to use ptids. If a process exits while
950 stopping all threads, mark its main lwp as dead.
951 (linux_set_resume_request, linux_resume_one_thread): Adjust to use
952 ptids.
953 (fetch_register, usr_store_inferior_registers)
954 (regsets_fetch_inferior_registers)
955 (regsets_store_inferior_registers, linux_read_memory)
956 (linux_write_memory): Inline `inferior_pid'.
957 (linux_look_up_symbols): Adjust to use per-process
958 `thread_db_active'.
959 (linux_request_interrupt): Adjust to use ptids.
960 (linux_read_auxv): Inline `inferior_pid'.
961 (initialize_low): Don't reference thread_db_active.
962 * gdb_proc_service.h (struct ps_prochandle) <pid>: Remove.
963 * proc-service.c (ps_lgetregs): Use find_lwp_pid.
964 (ps_getpid): Return the pid of the current inferior.
965 * thread-db.c (proc_handle, thread_agent): Delete.
966 (thread_db_create_event, thread_db_enable_reporting): Adjust to
967 per-process data.
968 (find_one_thread): Change argument type to ptid_t. Adjust to
969 per-process data.
970 (maybe_attach_thread): Adjust to per-process data and ptids.
971 (thread_db_find_new_threads): Ditto.
972 (thread_db_init): Ditto.
973 * spu-low.c (spu_create_inferior, spu_attach): Add process to
974 processes table. Adjust to use ptids.
975 (spu_kill, spu_detach): Adjust interface. Remove process from
976 processes table.
977 (spu_join, spu_thread_alive): Adjust interface.
978 (spu_wait): Adjust interface. Remove process from processes
979 table. Adjust to use ptids.
980 * win32-low.c (current_inferior_tid): Delete.
981 (current_inferior_ptid): New.
982 (debug_event_ptid): New.
983 (thread_rec): Take a ptid. Adjust.
984 (child_add_thread): Add `pid' argument. Adjust to use ptids.
985 (child_delete_thread): Ditto.
986 (do_initial_child_stuff): Add `attached' argument. Add process to
987 processes table.
988 (child_fetch_inferior_registers, child_store_inferior_registers):
989 Adjust.
990 (win32_create_inferior): Pass 0 to do_initial_child_stuff.
991 (win32_attach): Pass 1 to do_initial_child_stuff.
992 (win32_kill): Adjust interface. Remove process from processes
993 table.
994 (win32_detach): Ditto.
995 (win32_join): Adjust interface.
996 (win32_thread_alive): Take a ptid.
997 (win32_resume): Adjust to use ptids.
998 (get_child_debug_event): Ditto.
999 (win32_wait): Adjust interface. Remove exiting process from
1000 processes table.
1001
1002 2009-04-01 Pedro Alves <pedro@codesourcery.com>
1003
1004 Non-stop mode support.
1005
1006 * server.h (non_stop): Declare.
1007 (gdb_client_data, handler_func): Declare.
1008 (delete_file_handler, add_file_handler, start_event_loop):
1009 Declare.
1010 (handle_serial_event, handle_target_event, push_event)
1011 (putpkt_notif): Declare.
1012 * target.h (enum resume_kind): New.
1013 (struct thread_resume): Replace `step' field by `kind' field.
1014 (TARGET_WNOHANG): Define.
1015 (struct target_ops) <wait>: Add `options' argument.
1016 <supports_non_stop, async, start_non_stop>: New fields.
1017 (target_supports_non_stop, target_async): New.
1018 (start_non_stop): Declare.
1019 (mywait): Add `options' argument.
1020 * target.c (mywait): Add `options' argument. Print child exit
1021 notifications here.
1022 (start_non_stop): New.
1023 * server.c (non_stop, own_buf, mem_buf): New globals.
1024 (struct vstop_notif): New.
1025 (notif_queue): New global.
1026 (queue_stop_reply, push_event, discard_queued_stop_replies)
1027 (send_next_stop_reply): New.
1028 (start_inferior): Adjust to use resume_kind. Adjust to mywait
1029 interface changes.
1030 (attach_inferior): In non-stop mode, don't wait for the target
1031 here.
1032 (handle_general_set): Handle QNonStop.
1033 (handle_query): When handling qC, return the current general
1034 thread, instead of the first thread of the list.
1035 (handle_query): If the backend supports non-stop mode, include
1036 QNonStop+ in the qSupported query response.
1037 (handle_v_cont): Adjust to use resume_kind. Handle resume_stop
1038 and non-stop mode.
1039 (handle_v_attach, handle_v_run): Handle non-stop mode.
1040 (handle_v_stopped): New.
1041 (handle_v_requests): Report support for vCont;t. Handle vStopped.
1042 (myresume): Adjust to use resume_kind. Handle non-stop.
1043 (queue_stop_reply_callback): New.
1044 (handle_status): Handle non-stop mode.
1045 (main): Clear non_stop flag on reconnection. Use the event-loop.
1046 Refactor serial protocol handling from here ...
1047 (process_serial_event): ... to this new function. When GDB
1048 selects any thread, select one here. In non-stop mode, wait until
1049 GDB acks all pending events before exiting.
1050 (handle_serial_event, handle_target_event): New.
1051 * remote-utils.c (remote_open): Install remote_desc in the event
1052 loop.
1053 (remote_close): Remove remote_desc from the event loop.
1054 (putpkt_binary): Rename to...
1055 (putpkt_binary_1): ... this. Add `is_notic' argument. Handle it.
1056 (putpkt_binary): New as wrapper around putpkt_binary_1.
1057 (putpkt_notif): New.
1058 (prepare_resume_reply): In non-stop mode, don't change the
1059 general_thread.
1060 * event-loop.c: New.
1061 * Makefile.in (OBJ): Add event-loop.o.
1062 (event-loop.o): New rule.
1063
1064 * linux-low.h (pid_of): Moved here.
1065 (lwpid_of): New.
1066 (get_lwp_thread): Use lwpid_of.
1067 (struct lwp_info): Delete `lwpid' field. Add `suspended' field.
1068 * linux-low.c (pid_of): Delete.
1069 (inferior_pid): Use lwpid_of.
1070 (linux_event_pipe): New.
1071 (target_is_async_p): New.
1072 (delete_lwp): New.
1073 (handle_extended_wait): Use lwpid_of.
1074 (add_lwp): Don't set lwpid field.
1075 (linux_attach_lwp): Adjust debug output. Use lwpid_of.
1076 (linux_kill_one_lwp): If killing a running lwp, stop it first.
1077 Use lwpid_of. Adjust to linux_wait_for_event interface changes.
1078 (linux_detach_one_lwp): If detaching from a running lwp, stop it
1079 first. Adjust to linux_wait_for_event interface changes. Use
1080 lwpid_of.
1081 (linux_detach): Don't delete the main lwp here.
1082 (linux_join): Use my_waitpid. Avoid signal_pid. Use lwpid_of.
1083 (status_pending_p): Don't consider explicitly suspended lwps.
1084 (linux_wait_for_lwp): Take an integer pid instead of a lwp_info
1085 pointer. Add OPTIONS argument. Change return type to int. Use
1086 my_waitpid instead of sleeping. Handle WNOHANG. Use lwpid_of.
1087 (linux_wait_for_event): Take an integer pid instead of a lwp_info
1088 pointer. Add status pointer argument. Return a pid instead of a
1089 status. Use lwpid_of. Adjust to linux_wait_for_lwp interface
1090 changes. In non-stop mode, don't switch to a random thread.
1091 (linux_wait): Rename to...
1092 (linux_wait_1): ... this. Add target_options argument, and handle
1093 it. Adjust to use resume_kind. Use lwpid_of. In non-stop mode,
1094 don't handle the continue thread. Handle TARGET_WNOHANG. Merge
1095 clean exit and signal exit code. Don't stop all threads in
1096 non-stop mode. In all-stop mode, only stop all threads when
1097 reporting a stop to GDB. Handle explicit thread stop requests.
1098 (async_file_flush, async_file_mark): New.
1099 (linux_wait): New.
1100 (send_sigstop): Use lwpid_of.
1101 (wait_for_sigstop): Use lwpid_of. Adjust to linux_wait_for_event
1102 interface changes. In non-stop mode, don't switch to a random
1103 thread.
1104 (linux_resume_one_lwp): Use lwpid_of.
1105 (linux_continue_one_thread, linux_queue_one_thread): Merge into ...
1106 (linux_resume_one_thread): ... this. Handle resume_stop. In
1107 non-stop mode, don't look for pending flag in all threads.
1108 (resume_status_pending_p): Don't consider explicitly suspended
1109 threads.
1110 (my_waitpid): Reimplement. Emulate __WALL.
1111 (linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
1112 Use lwpid_of.
1113 (sigchld_handler, linux_supports_non_stop, linux_async)
1114 (linux_start_non_stop): New.
1115 (linux_target_ops): Register linux_supports_non_stop, linux_async
1116 and linux_start_non_stop.
1117 (initialize_low): Install SIGCHLD handler.
1118 * thread-db.c (thread_db_create_event, find_one_thread)
1119 (thread_db_get_tls_address): Use lwpid_of.
1120 * win32-low.c (win32_detach): Adjust to use resume_kind.
1121 (win32_wait): Add `options' argument.
1122 * spu-low.c (spu_resume): Adjust to use resume_kind.
1123 (spu_wait): Add `options' argument.
1124
1125 2009-04-01 Pedro Alves <pedro@codesourcery.com>
1126
1127 Decouple target code from remote protocol.
1128
1129 * target.h (enum target_waitkind): New.
1130 (struct target_waitstatus): New.
1131 (struct target_ops) <wait>: Return an unsigned long. Take a
1132 target_waitstatus pointer instead of a char pointer.
1133 (mywait): Likewise.
1134 * target.c (mywait): Change prototype to return an unsigned long.
1135 Take a target_waitstatus pointer instead of a char pointer. Adjust.
1136 * server.h (thread_from_wait, old_thread_from_wait): Delete
1137 declarations.
1138 (prepare_resume_reply): Change prototype to take a
1139 target_waitstatus.
1140 * server.c (thread_from_wait, old_thread_from_wait): Delete.
1141 (last_status, last_ptid): New.
1142 (start_inferior): Remove "statusptr" argument. Adjust. Return a
1143 pid instead of a signal.
1144 (attach_inferior): Remove "status" and "signal" parameters.
1145 Adjust.
1146 (handle_query): For qGetTLSAddr, parse the thread id with strtol,
1147 not as an address.
1148 (handle_v_cont, handle_v_attach, handle_v_run, handle_v_kill)
1149 (handle_v_requests, myresume): Remove "status" and "signal"
1150 parameters. Adjust.
1151 (handle_status): New.
1152 (main): Delete local `status'. Adjust.
1153 * remote-utils.c: Include target.h.
1154 (prepare_resume_reply): Change prototype to take a
1155 target_waitstatus. Adjust.
1156
1157 * linux-low.c (linux_wait): Adjust to new target_ops->wait
1158 interface.
1159 * spu-low.c (spu_wait): Adjust.
1160 * win32-low.c (enum target_waitkind, struct target_waitstatus):
1161 Delete.
1162 (win32_wait): Adjust.
1163
1164 2009-04-01 Pedro Alves <pedro@codesourcery.com>
1165
1166 * target.h (struct thread_resume): Delete leave_stopped member.
1167 (struct target_ops): Add a `n' argument to the `resume' callback.
1168 * server.c (start_inferior): Adjust.
1169 (handle_v_cont, myresume): Adjust.
1170 * linux-low.c (check_removed_breakpoint): Adjust to resume
1171 interface change, and to removed leave_stopped field.
1172 (resume_ptr): Delete.
1173 (struct thread_resume_array): New.
1174 (linux_set_resume_request): Add new `arg' parameter. Adjust to
1175 resume interface change.
1176 (linux_continue_one_thread, linux_queue_one_thread)
1177 (resume_status_pending_p): Check if the resume field is NULL
1178 instead of checking the leave_stopped member.
1179 (linux_resume): Adjust to the target resume interface change.
1180 * spu-low.c (spu_resume): Adjust to the target resume interface
1181 change.
1182 * win32-low.c (win32_detach, win32_resume): Ditto.
1183
1184 2009-04-01 Pedro Alves <pedro@codesourcery.com>
1185
1186 * linux-low.c (linux_wait_for_event): Don't clear the `stepping'
1187 flag.
1188 (wait_for_sigstop): Don't leave a finished single-step SIGTRAP
1189 pending.
1190 (linux_continue_one_thread): Only preserve the stepping flag if
1191 there's a pending breakpoint.
1192
1193 2009-03-31 Pedro Alves <pedro@codesourcery.com>
1194
1195 * server.c (main): After the inferior having exited, call
1196 remote_close before exiting gdbserver.
1197
1198 2009-03-25 Thiago Jung Bauermann <bauerman@br.ibm.com>
1199
1200 Fix size of FPSCR in Power 7 processors.
1201 * linux-ppc-low.c (PPC_FEATURE_ARCH_2_05): Remove #define.
1202 (PPC_FEATURE_HAS_DFP): New #define.
1203 (ppc_arch_setup): Check for DFP feature instead of ISA 2.05 to decide on
1204 size of the FPSCR.
1205
1206 2009-03-23 Pedro Alves <pedro@codesourcery.com>
1207
1208 * server.c (handle_query) Whitespace and formatting.
1209
1210 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1211
1212 * i387-fp.c, linux-arm-low.c, linux-cris-low.c,
1213 linux-crisv32-low.c, linux-i386-low.c, linux-low.c,
1214 linux-mips-low.c, linux-s390-low.c, linux-sparc-low.c,
1215 linux-x86-64-low.c, linux-xtensa-low.c, proc-service.c,
1216 regcache.c, remote-utils.c, server.c, spu-low.c, target.h,
1217 thread-db.c, win32-low.c, xtensa-xtregs.c, gdbreplay.c,
1218 Makefile.in, configure.ac: Fix whitespace throughout.
1219 * configure: Regenerate.
1220
1221 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1222
1223 * inferiors.c (find_inferior): Make it safe for the callback
1224 function to delete the currently iterated inferior.
1225
1226 2009-03-22 Pedro Alves <pedro@codesourcery.com>
1227
1228 * Makefile.in (linuw_low_h): Move higher.
1229 (thread-db.o): Depend on $(linux_low_h).
1230
1231 2009-03-17 Pedro Alves <pedro@codesourcery.com>
1232
1233 Rename "process" to "lwp" throughout.
1234
1235 * linux-low.c (all_processes): Rename to...
1236 (all_lwps): ... this.
1237 (inferior_pid, handle_extended_wait, get_stop_pc): Adjust.
1238 (add_process): Rename to ...
1239 (add_lwp): ... this. Adjust.
1240 (linux_create_inferior): Adjust.
1241 (linux_attach_lwp): Adjust.
1242 (linux_attach): Adjust.
1243 (linux_kill_one_process): Rename to ...
1244 (linux_kill_one_lwp): ... this. Adjust.
1245 (linux_kill): Adjust.
1246 (linux_detach_one_process): Rename to ...
1247 (linux_detach_one_lwp): ... this. Adjust.
1248 (linux_detach): Adjust.
1249 (check_removed_breakpoint): Adjust.
1250 (status_pending_p): Adjust.
1251 (linux_wait_for_process): Rename to ...
1252 (linux_wait_for_lwp): ... this. Adjust.
1253 (linux_wait_for_event): Adjust.
1254 (send_sigstop): Adjust.
1255 (wait_for_sigstop): Adjust.
1256 (stop_all_processes): Rename to ...
1257 (stop_all_lwps): ... this.
1258 (linux_resume_one_process): Rename to ...
1259 (linux_resume_one_lwp): ... this. Adjust.
1260 (linux_set_resume_request, linux_continue_one_thread)
1261 (linux_queue_one_thread, resume_status_pending_p)
1262 (usr_store_inferior_registers, regsets_store_inferior_registers)
1263 (linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo):
1264 Adjust.
1265 * linux-low.h (get_process): Rename to ...
1266 (get_lwp): ... this. Adjust.
1267 (get_thread_process): Rename to ...
1268 (get_thread_lwp): ... this. Adjust.
1269 (get_process_thread): Rename to ...
1270 (get_lwp_thread): ... this. Adjust.
1271 (struct process_info): Rename to ...
1272 (struct lwp_info): ... this.
1273 (all_processes): Rename to ...
1274 (all_lwps): ... this.
1275 * proc-service.c (ps_lgetregs): Adjust.
1276 * thread-db.c (thread_db_create_event, find_one_thread)
1277 (maybe_attach_thread, thread_db_get_tls_address): Adjust.
1278
1279 2009-03-14 Pedro Alves <pedro@codesourcery.com>
1280
1281 * server.c (handle_query): Handle "qAttached".
1282
1283 2009-03-13 Nathan Sidwell <nathan@codesourcery.com>
1284
1285 * Makefile.in, hostio-errno.c, errno.c, xtensa-xtregs.c: Change to
1286 GPLv3, update license URL.
1287
1288 2009-03-01 Doug Evans <dje@google.com>
1289
1290 * Makefile.in (INCLUDE_CFLAGS): Add -I$(srcdir)/../common.
1291 (server_h): Add gdb_signals.h.
1292 (signals.o): Update.
1293 * server.h (target_signal_from_host,target_signal_to_host_p)
1294 (target_signal_to_host,target_signal_to_name): Moved to gdb_signals.h.
1295
1296 2009-02-14 Pierre Muller <muller@ics.u-strasbg.fr>
1297
1298 * remote-utils.c (getpkt): Also generate remote-debug
1299 information if noack_mode is set.
1300
1301 2009-02-06 Pedro Alves <pedro@codesourcery.com>
1302
1303 * server.c (handle_query): Report qXfer:siginfo:read and
1304 qXfer:siginfo:write as supported and handle them.
1305 * target.h (struct target_ops) <qxfer_siginfo>: New field.
1306 * linux-low.c (linux_xfer_siginfo): New.
1307 (linux_target_ops): Set it.
1308
1309 2009-01-26 Pedro Alves <pedro@codesourcery.com>
1310
1311 * server.c (gdbserver_usage): Mention --remote-debug.
1312 (main): Accept '--remote-debug' switch.
1313
1314 2009-01-18 Doug Evans <dje@google.com>
1315
1316 * regcache.c (new_register_cache): No need to check result of xcalloc.
1317 * server.c (handle_search_memory): Back out calls to xmalloc,
1318 result is checked and error is returned to user upon failure.
1319 (handle_query): Ditto. Add more checks for result of malloc.
1320 (handle_v_cont): Check result of malloc, report error back to
1321 user upon failure.
1322 (handle_v_run): Ditto. Call freeargv.
1323 * server.h (freeargv): Declare.
1324 * utils.c (freeargv): New fn.
1325
1326 2009-01-15 Doug Evans <dje@google.com>
1327
1328 * gdbreplay.c (perror_with_name): Make arg const char *.
1329 * server.h (target_signal_to_name): Make return type const char *.
1330 * thread-db.c (thread_db_err_str): Make return type const char *.
1331 * utils.c (perror_with_name): Make arg const char *.
1332
1333 2009-01-14 Pedro Alves <pedro@codesourcery.com>
1334
1335 * win32-low.c (get_child_debug_event): Issue a final DBG_CONTINUE
1336 when handling a EXIT_PROCESS_DEBUG_EVENT.
1337
1338 2009-01-06 Joel Brobecker <brobecker@adacore.com>
1339
1340 * gdbreplay.c (gdbreplay_version): Update copyright year.
1341 * server.c (gdbserver_version): Likewise.
1342
1343 2009-01-05 Doug Evans <dje@google.com>
1344
1345 * linux-low.c (linux_attach_lwp): Add some comments/fixmes.
1346 (handle_extended_wait): Improve comment.
1347
1348 2008-12-13 Doug Evans <dje@google.com>
1349
1350 * utils.c (xmalloc,xcalloc,xstrdup): New fns.
1351 * server.h (ATTR_MALLOC): New macro.
1352 (xmalloc,xcalloc,xstrdup): Declare.
1353 * hostio.c: Replace malloc,calloc,strdup with xmalloc,xcalloc,xstrdup.
1354 * inferiors.c: Ditto.
1355 * linux-low.c: Ditto.
1356 * mem-break.c: Ditto.
1357 * regcache.c: Ditto.
1358 * remote-utils.c: Ditto.
1359 * server.c: Ditto.
1360 * target.c: Ditto.
1361 * win32-low.c: Ditto.
1362
1363 2008-12-12 Doug Evans <dje@google.com>
1364
1365 * linux-low.c (linux_wait_for_process): Don't clobber current_inferior
1366 in debugging printf.
1367
1368 * linux-low.c (handle_extended_wait): Simplify, use my_waitpid.
1369
1370 2008-12-09 Doug Evans <dje@google.com>
1371
1372 * linux-low.h (struct process_info): Delete member tid, unused.
1373 * thread-db.c (find_one_thread): Update.
1374 (maybe_attach_thread): Update.
1375
1376 2008-12-02 Pedro Alves <pedro@codesourcery.com>
1377
1378 * target.h (struct target_ops): Add qxfer_osdata member.
1379 * linux-low.c: Include ctype.h and pwd.h and sys/types.h
1380 and dirent.h.
1381 (linux_qxfer_osdata): New functions.
1382 (linux_target_ops): Register linux_qxfer_osdata as qxfer_osdata
1383 callback.
1384 * server.c (handle_query): Handle "qXfer:osdata:read:".
1385 * remote-utils.c (buffer_grow, buffer_free, buffer_init, buffer_finish)
1386 (buffer_xml_printf): New functions.
1387 * server.h (struct buffer): New.
1388 (buffer_grow_str, buffer_grow_str0): New macros.
1389 (buffer_grow, buffer_free, buffer_init, buffer_finish)
1390 (buffer_xml_printf): Declare.
1391
1392 2008-11-24 Doug Evans <dje@google.com>
1393
1394 * Makefile.in (VERSION,DIST,LINT,LINTFLAGS): Delete, unused.
1395
1396 2008-11-24 Daniel Jacobowitz <dan@codesourcery.com>
1397
1398 * server.c (handle_v_run): Always use the supplied argument list.
1399
1400 2008-11-19 Bob Wilson <bob.wilson@acm.org>
1401
1402 * xtensa-xtregs.c (XTENSA_ELF_XTREG_SIZE): Change to 4.
1403 (xtensa_regmap_table): Add entry for scompare1.
1404
1405 2008-11-18 Thiago Jung Bauermann <bauerman@br.ibm.com>
1406
1407 * Makefile.in (powerpc-isa205-32l.o, powerpc-isa205-32l.c,
1408 powerpc-isa205-altivec32l.o, powerpc-isa205-altivec32l.c,
1409 powerpc-isa205-vsx32l.o, powerpc-isa205-vsx32l.c,
1410 powerpc-isa205-64l.o, powerpc-isa205-64l.c,
1411 powerpc-isa205-altivec64l.o, powerpc-isa205-altivec64l.c,
1412 powerpc-isa205-vsx64l.o, powerpc-isa205-vsx64l.c): New targets.
1413 * configure.srv (powerpc*-*-linux*): Add ISA 2.05 object files and
1414 XML target descriptions.
1415 * linux-ppc-low.c (ppc_arch_setup): Init registers with 64-bit FPSCR
1416 when inferior is running on an ISA 2.05 or later processor. Add
1417 special case to return offset for full 64-bit slot of FPSCR when
1418 in 32-bits.
1419
1420 2008-11-14 Daniel Gutson <dgutson@codesourcery.com>
1421
1422 * Makefile.in (SFILES, clean): Added sparc64 files.
1423 (reg-sparc64.o, reg-sparc64.c): New.
1424 * configure.srv (sparc*-*-linux*): New configuration.
1425 * linux-low.c (regsets_fetch_inferior_registers): Swap ptrace
1426 syscall arguments for SPARC.
1427 (regsets_store_inferior_registers): Likewise.
1428 * linux-sparc-low.c: New file.
1429
1430 2008-10-21 Doug Evans <dje@google.com>
1431
1432 * Makefile.in (BFD_DIR,BFD,BFD_SRC,BFD_CFLAGS): Delete.
1433 (READLINE_DIR,READLINE_DEP): Delete.
1434 (INTERNAL_CFLAGS): Update.
1435 (LINTFLAGS): Update.
1436
1437 2008-10-10 Pedro Alves <pedro@codesourcery.com>
1438
1439 * server.c (handle_v_run): If GDB didn't specify an argv, use the
1440 whole argv from the last run, not just argv[0].
1441
1442 2008-09-08 Pedro Alves <pedro@codesourcery.com>
1443
1444 * regcache.c (new_register_cache): Return NULL if the register
1445 cache size isn't known yet.
1446 (free_register_cache): Avoid dereferencing a NULL regcache.
1447
1448 2008-09-04 Daniel Jacobowitz <dan@codesourcery.com>
1449
1450 * configure.srv: Merge MIPS and MIPS64.
1451
1452 2008-08-24 Maciej W. Rozycki <macro@linux-mips.org>
1453
1454 * Makefile.in (uninstall): Apply $(EXEEXT) too.
1455
1456 2008-08-18 Luis Machado <luisgpm@br.ibm.com>
1457
1458 * Makefile.in: Add required vsx dependencies.
1459
1460 * linux-ppc-low: Define PPC_FEATURE_HAS_VSX.
1461 Declare init_registers_powerpc_vsx32l.
1462 Declare init_registers_powerpc_vsx64l.
1463 Define PTRACE_GETVSXREGS and PTRACE_SETVSXREGS.
1464 (ppc_arch_setup): Check for VSX in hwcap.
1465 (ppc_fill_vsxregset): New function.
1466 (ppc_store_vsxregset): New function.
1467 Add new VSX entry in regset_info target_regsets.
1468
1469 * configure.srv: Add new VSX dependencies.
1470
1471 2008-08-12 Pedro Alves <pedro@codesourcery.com>
1472
1473 * remote-utils.c (noack_mode, transport_is_reliable): New globals.
1474 (remote_open): Set or clear transport_is_reliable.
1475 (putpkt_binary): Don't expect acks in noack mode.
1476 (getpkt): Don't send ack/nac in noack mode.
1477 * server.c (handle_general_set): Handle QStartNoAckMode.
1478 (handle_query): If connected by tcp pass QStartNoAckMode+ in
1479 qSupported.
1480 (main): Reset noack_mode on every connection.
1481 * server.h (noack_mode): Declare.
1482
1483 2008-08-07 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
1484
1485 * Makefile.in (GDBREPLAY_OBS): New variable.
1486 (gdbreplay$(EXEEXT)): Use it to avoid unportable $^.
1487
1488 2008-08-05 Ulrich Weigand <uweigand@de.ibm.com>
1489 Daniel Jacobowitz <dan@codesourcery.com>
1490
1491 * linux-low.c (linux_resume_one_process): Ignore ESRCH.
1492 (usr_store_inferior_registers): Likewise.
1493 (regsets_store_inferior_registers): Likewise.
1494
1495 2008-07-31 Rolf Jansen <rj@surtec.com>
1496 Pedro Alves <pedro@codesourcery.com>
1497
1498 * configure.ac: Check for memmem declaration.
1499 * server.c [HAVE_MALLOC_H]: Include malloc.h.
1500 (disable_packet_vCont, disable_packet_Tthread, disable_packet_qC)
1501 (disable_packet_qfThreadInfo): Unconditionally compile.
1502 * server.h [!HAVE_DECL_MEMMEM]: Declare memmem.
1503 * configure, config.in: Regenerate.
1504
1505 2008-07-28 Doug Kwan <dougkwan@google.com>
1506
1507 * linux-low.c (sys/dir.h, sys/user.h): Remove includes.
1508 (linux_write_memory): Remove declaration of errno.
1509
1510 2008-07-12 Ulrich Weigand <uweigand@de.ibm.com>
1511
1512 * linux-low.c (handle_extended_wait): Do not use "status"
1513 variable uninitialized.
1514
1515 2008-07-07 Pedro Alves <pedro@codesourcery.com>
1516
1517 * server.c (handle_v_attach): Inhibit reporting dll changes.
1518
1519 2008-06-27 Pedro Alves <pedro@codesourcery.com>
1520
1521 * remote-utils.c (prepare_resume_reply): If requested, don't
1522 output "thread:TID" in the T stop reply.
1523
1524 * server.c (disable_packet_vCont, disable_packet_Tthread)
1525 (disable_packet_qC, disable_packet_qfThreadInfo): New globals.
1526 (handle_query): If requested, disable support for qC, qfThreadInfo
1527 and qsThreadInfo.
1528 (handle_v_requests): If requested, disable support for vCont.
1529 (gdbserver_show_disableable): New.
1530 (main): Handle --disable-packet and --disable-packet=LIST.
1531
1532 * server.h (disable_packet_vCont, disable_packet_Tthread)
1533 (disable_packet_qC, disable_packet_qfThreadInfo): Declare.
1534
1535 2008-06-20 Carlos O'Donell <carlos@codesourcery.com>
1536
1537 * server.c (gdbserver_usage): Mention --version.
1538
1539 2008-06-06 Daniel Jacobowitz <dan@codesourcery.com>
1540
1541 * Makefile.in (gdbreplay.o): New rule.
1542
1543 2008-06-06 Joseph Myers <joseph@codesourcery.com>
1544
1545 * gdbreplay.c (gdbreplay_version): Say gdbreplay in version
1546 message, not gdbserver.
1547
1548 2008-06-05 Vladimir Prus <vladimir@codesourcery.com>
1549 Nathan Sidwell <nathan@codesourcery.com>
1550 Joseph Myers <joseph@codesourcery.com>
1551
1552 * acinclude.m4: Include ../../config/acx.m4.
1553 * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
1554 * configure, config.in: Regenerate.
1555 * Makefile.in (gdbreplay$(EXEEXT)): Add version.o.
1556 * server.c (gdbserver_version): Print PKGVERSION.
1557 (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO.
1558 (main): Adjust gdbserver_usage calls.
1559 * gdbreplay.c (version, host_name): Add declarations.
1560 (gdbreplay_version, gdbreplay_usage): New.
1561 (main): Accept --version and --help options.
1562
1563 2008-06-04 Daniel Jacobowitz <dan@codesourcery.com>
1564
1565 * linux-arm-low.c (thumb_breakpoint, thumb_breakpoint_len): New.
1566 (arm_breakpoint_at): Handle Thumb.
1567 (the_low_target): Add comment.
1568
1569 2008-05-29 Ulrich Weigand <uweigand@de.ibm.com>
1570
1571 * linux-ppc-low.c (ppc_collect_ptrace_register): Clear buffer.
1572
1573 2008-05-09 Doug Evans <dje@google.com>
1574
1575 * server.h (decode_search_memory_packet): Declare.
1576 * remote-utils.c (decode_search_memory_packet): New fn.
1577 * server.c (handle_search_memory_1): New fn.
1578 (handle_search_memory): New fn.
1579 (handle_query): Process qSearch:memory packets.
1580
1581 2008-05-08 Ulrich Weigand <uweigand@de.ibm.com>
1582
1583 * regcache.c (registers_length): Remove.
1584 (set_register_cache): Verify that PBUFSIZ is large enough to hold a
1585 full register packet.
1586 * regcache.h (registers_length): Remove prototype.
1587 * server.h (PBUFSIZ): Define to 16384.
1588
1589 2008-05-03 Ulrich Weigand <uweigand@de.ibm.com>
1590
1591 * configure.srv (powerpc*-*-linux*): Set srv_regobj to
1592 powerpc-32l.o, powerpc-altivec32l.o, powerpc-e500l.o,
1593 powerpc-64l.o, and powerpc-altivec64l.o.
1594 Remove rs6000/powerpc-32.xml, rs6000/powerpc-64.xml, and
1595 rs6000/powerpc-e500.xml; add rs6000/powerpc-32l.xml,
1596 rs6000/powerpc-altivec32l.xml, rs6000/powerpc-e500l.xml,
1597 rs6000/powerpc-64l.xml, rs6000/powerpc-altivec64l.xml,
1598 rs6000/power-linux.xml, and rs6000/power64-linux.xml
1599 to srv_xmlfiles.
1600
1601 * Makefile.in (reg-ppc.o, reg-ppc.c): Remove, replace by ...
1602 (powerpc-32l.o, powerpc-32l.c): ... these new rules.
1603 (powerpc-32.o, powerpc-32.c): Remove, replace by ...
1604 (powerpc-altivec32l.o, powerpc-altivec32l.c): ... these new rules.
1605 (powerpc-e500.o, powerpc-e500.c): Remove, replace by ...
1606 (powerpc-e500l.o, powerpc-e500l.c): ... these new rules.
1607 (reg-ppc64.o, reg-ppc64.c): Remove, replace by ...
1608 (powerpc-64l.o, powerpc-64l.c): ... these new rules.
1609 (powerpc-64.o, powerpc-64.c): Remove, replace by ...
1610 (powerpc-altivec64l.o, powerpc-altivec64l.c): ... these new rules.
1611 (clean): Update.
1612
1613 * linux-ppc-low.c (init_registers_ppc): Remove, replace by ...
1614 (init_registers_powerpc_32l): ... this new prototype.
1615 (init_registers_powerpc_32): Remove, replace by ...
1616 (init_registers_powerpc_altivec32l): ... this new prototype.
1617 (init_registers_powerpc_e500): Remove, replace by ...
1618 (init_registers_powerpc_e500l): ... this new prototype.
1619 (init_registers_ppc64): Remove, replace by ...
1620 (init_registers_powerpc_64l): ... this new prototype.
1621 (init_registers_powerpc_64): Remove, replace by ...
1622 (init_registers_powerpc_altivec64l): ... this new prototype.
1623 (ppc_num_regs): Set to 73.
1624 (PT_ORIG_R3, PT_TRAP): Define if necessary.
1625 (ppc_regmap, ppc_regmap_e500): Add values for orig_r3 and trap.
1626 (ppc_cannot_store_register): Handle orig_r3 and trap.
1627 (ppc_arch_setup): Update init_registers_... calls.
1628 (ppc_fill_gregset): Handle orig_r3 and trap.
1629
1630 * inferiors.c (clear_inferiors): Reset current_inferior.
1631
1632 2008-04-23 Paolo Bonzini <bonzini@gnu.org>
1633
1634 * acinclude.m4: Add override.m4.
1635 * configure: Regenerate.
1636
1637 2008-04-21 Ulrich Weigand <uweigand@de.ibm.com>
1638
1639 * linux-ppc-low.c (ppc_arch_setup): Reset ppc_hwcap after the
1640 initial call to init_register_ppc64.
1641
1642 2008-04-21 Ulrich Weigand <uweigand@de.ibm.com>
1643
1644 * configure.srv (powerpc64-*-linux*, powerpc-*-linux*): Merge into single
1645 powerpc*-*-linux* case.
1646 (s390-*-linux*, s390x-*-linux*): Merge into single s390*-*-linux* case.
1647
1648 2008-04-17 Ulrich Weigand <uweigand@de.ibm.com>
1649
1650 * configure.srv [powerpc64-*-linux*]: Remove powerpc-e500.o from
1651 srv_regobj. Remove rs6000/powerpc-e500.xml and rs6000/power-spe.xml
1652 from reg_xmlfiles.
1653 * linux-ppc-low.c: Include <elf.h>.
1654 (PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Define.
1655 (ppc_hwcap): New global variable.
1656 (ppc_regmap): Remove __SPE__ #ifdef sections.
1657 (ppc_regmap_e500): New global variable.
1658 (ppc_cannot_store_register): Update __SPE__ special case.
1659 (ppc_get_hwcap): New function.
1660 (ppc_arch_setup): Use it to determine whether inferior supports
1661 AltiVec or SPE registers. Set the_low_target.regmap if appropriate.
1662 (ppc_fill_vrregset, ppc_store_vrregset): Define unconditionally.
1663 Do not access registers if target does not support AltiVec.
1664 (ppc_fill_evrregset, ppc_store_evrregset): Define unconditionally.
1665 Do not access registers if target does not support SPE.
1666 (target_regsets): Unconditionally include AltiVec and SPE regsets.
1667
1668 2008-04-17 Daniel Jacobowitz <dan@codesourcery.com>
1669
1670 * linux-low.c (disabled_regsets, num_regsets): New.
1671 (use_regsets_p): Delete.
1672 (linux_wait_for_process): Clear disabled_regsets.
1673 (regsets_fetch_inferior_registers): Check and set it.
1674 (regsets_store_inferior_registers): Likewise.
1675 (linux_fetch_registers, linux_store_registers): Do not use
1676 use_regsets_p.
1677 (initialize_low): Allocate disabled_regsets.
1678
1679 2008-04-14 Daniel Jacobowitz <dan@codesourcery.com>
1680
1681 * Makefile.in (LIBOBJS): New.
1682 (OBS): Use LIBOBJS.
1683 (memmem.o): New rule.
1684 * configure.ac: Use AC_CONFIG_LIBOBJ_DIR and check for memmem.
1685 * configure: Regenerated.
1686
1687 2008-04-04 Ulrich Weigand <uweigand@de.ibm.com>
1688
1689 * server.c (handle_query): Never return "unsupported" for
1690 qXfer:features:read queries.
1691
1692 2008-03-27 Ulrich Weigand <uweigand@de.ibm.com>
1693
1694 * server.c (get_features_xml): Fix inverted condition.
1695 (handle_query): Always support qXfer:feature:read.
1696
1697 2008-03-10 Daniel Jacobowitz <dan@codesourcery.com>
1698
1699 * server.c (wrapper_argv): New.
1700 (start_inferior): Handle wrapper_argv. If set, expect an extra
1701 trap.
1702 (gdbserver_usage): Document --wrapper.
1703 (main): Parse --wrapper.
1704
1705 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
1706
1707 * configure.srv [powerpc64-*-linux*]: Add all files mentioned for
1708 powerpc-*-linux* to srv_regobj and reg_xmlfiles.
1709 * linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
1710 (ppc_set_pc): Likewise.
1711 (ppc_arch_setup): New function.
1712 (ppc_fill_gregset): Call ppc_collect_ptrace_register instead
1713 of collect_register.
1714 (the_low_target): Use ppc_arch_setup as arch_setup initializer.
1715
1716 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
1717
1718 * configure.srv [powerpc64-*-linux*]: Use linux-ppc-low.o
1719 instead of linux-ppc64-low.o.
1720 * linux-ppc64-low.c: Remove file.
1721 * Makefile.in (SFILES): Remove linux-ppc64-low.c.
1722 (linux-ppc64-low.o): Remove rule.
1723
1724 * linux-ppc-low.c (init_registers_ppc64): Add prototype.
1725 (init_registers_powerpc_64): Likewise.
1726 (ppc_regmap): Conditionally define depending on __powerpc64__.
1727 (ppc_cannot_store_register): Do not special-case "fpscr" when
1728 compiled on __powerpc64__.
1729 (ppc_collect_ptrace_register): New function.
1730 (ppc_supply_ptrace_register): New function.
1731 (ppc_breakpoint): Change type to "unsigned int".
1732 (ppc_breakpoint_at): Change type of "insn" to "unsigned int".
1733 (the_low_target): Conditionally provide initializers for the
1734 arch_setup member depending on __powerpc64__. Install
1735 collect_ptrace_register and supply_ptrace_register members.
1736
1737 2008-02-28 Ulrich Weigand <uweigand@de.ibm.com>
1738
1739 * regcache.h (gdbserver_xmltarget): Add extern declaration.
1740 * server.c (gdbserver_xmltarget): Define.
1741 (get_features_xml): Use it to replace "target.xml" and arch_string.
1742
1743 * configure.srv: Remove srv_xmltarget. Add XML files that were
1744 mentioned there to srv_xmlfiles instead. Remove conditional tests
1745 on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
1746 srv_xmlfiles and srv_regobj to include all possible choices.
1747 * configure.ac (srv_xmltarget): Remove.
1748 (srv_xmlfiles): Do not add "target.xml".
1749 (gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
1750 checks for supplementary target information.
1751 * configure: Regenerate.
1752 * Makefile.in (XML_TARGET): Remove.
1753 (target.xml): Remove rule.
1754 (clean): Do not clean up target.xml.
1755 (.PRECIOUS): Do not mention target.xml.
1756
1757 * target.h (struct target_ops): Remove arch_string member.
1758 * linux-low.c (linux_arch_string): Remove.
1759 (linux_target_ops): Remove arch_string initializer.
1760 * linux-low.h (struct linux_target_ops): Remove arch_string member.
1761 * linux-i386-low.c (the_low_target): Remove arch_string initializer.
1762 * linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
1763 * spu-low.c (spu_arch_string): Remove.
1764 (spu_target_ops): Remove arch_string initializer.
1765 * win32-low.c (win32_arch_string): Remove.
1766 (win32_target_ops): Remove arch_string initializer.
1767 * win32-low.h (struct win32_target_ops): Remove arch_string member.
1768 * win32-arm-low.c (the_low_target): Remove arch_string initializer.
1769 * win32-i368-low.c (the_low_target): Remove arch_string initializer.
1770
1771 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
1772
1773 * linux-low.h (struct linux_target_ops): Replace left_pad_xfer field
1774 by collect_ptrace_register and supply_ptrace_register hooks.
1775 * linux-low.c (fetch_register): Use supply_ptrace_register callback
1776 instead of checking for the_low_target.left_pad_xfer.
1777 (usr_store_inferior_registers): Use collect_ptrace_register callback
1778 instead of checking for the_low_target.left_pad_xfer.
1779
1780 * linux-s390-low.c (s390_collect_ptrace_register): New function.
1781 (s390_supply_ptrace_register): Likewise.
1782 (s390_fill_gregset): Call s390_collect_ptrace_register.
1783 (the_low_target): Update.
1784
1785 * linux-ppc64-low.c (ppc_collect_ptrace_register): New function.
1786 (ppc_supply_ptrace_register): Likewise.
1787 (the_low_target): Update.
1788
1789 * linux-i386-low.c (the_low_target): Update.
1790 * linux-x86-64-low.c (the_low_target): Update.
1791
1792 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
1793
1794 * configure.srv [s390x-*-linux*]: Set srv_regobj to include both
1795 reg-s390.o and reg-s390x.o.
1796
1797 * linux-low.c (new_inferior): New global variable.
1798 (linux_create_inferior, linux_attach): Set it.
1799 (linux_wait_for_process): Call the_low_target.arch_setup after the
1800 target has stopped for the first time.
1801 (initialize_low): Do not call the_low_target.arch_setup.
1802
1803 * linux-s390-low.c (s390_get_pc): Support bi-arch operation.
1804 (s390_set_pc): Likewise.
1805 (s390_arch_setup): New function.
1806 (the_low_target): Use s390_arch_setup as arch_setup routine.
1807
1808 * regcache.c (realloc_register_cache): New function.
1809 (set_register_cache): Call it for each existing regcache.
1810
1811 2008-02-27 Ulrich Weigand <uweigand@de.ibm.com>
1812
1813 * server.h (init_registers): Remove prototype.
1814
1815 * linux-low.h (struct linux_target_ops): Add arch_setup field.
1816 * linux-low.c (initialize_low): Call the_low_target.arch_setup ()
1817 instead of init_registers ().
1818 * linux-arm-low.c (init_registers_arm): Add prototype.
1819 (init_registers_arm_with_iwmmxt): Likewise.
1820 (the_low_target): Add initializer for arch_setup field.
1821 * linux-cris-low.c (init_registers_cris): Add prototype.
1822 (the_low_target): Add initializer for arch_setup field.
1823 * linux-crisv32-low.c (init_registers_crisv32): Add prototype.
1824 (the_low_target): Add initializer for arch_setup field.
1825 * linux-i386-low.c (init_registers_i386_linux): Add prototype.
1826 (the_low_target): Add initializer for arch_setup field.
1827 * linux-ia64-low.c (init_registers_ia64): Add prototype.
1828 (the_low_target): Add initializer for arch_setup field.
1829 * linux-m32r-low.c (init_registers_m32r): Add prototype.
1830 (the_low_target): Add initializer for arch_setup field.
1831 * linux-m68k-low.c (init_registers_m68k): Add prototype.
1832 (the_low_target): Add initializer for arch_setup field.
1833 * linux-mips-low.c (init_registers_mips_linux): Add prototype.
1834 (init_registers_mips64_linux): Likewise.
1835 (the_low_target): Add initializer for arch_setup field.
1836 * linux-ppc-low.c (init_registers_ppc): Add prototype.
1837 (init_registers_powerpc_32, init_registers_powerpc_e500): Likewise.
1838 (the_low_target): Add initializer for arch_setup field.
1839 * linux-ppc64-low.c (init_registers_ppc64): Add prototype.
1840 (init_registers_powerpc_64): Likewise.
1841 (the_low_target): Add initializer for arch_setup field.
1842 * linux-s390-low.c (init_registers_s390): Add prototype.
1843 (init_registers_s390x): Likewise.
1844 (the_low_target): Add initializer for arch_setup field.
1845 * linux-sh-low.c (init_registers_sh): Add prototype.
1846 (the_low_target): Add initializer for arch_setup field.
1847 * linux-x86-64-low.c (init_registers_x86_64_linux): Add prototype.
1848 (the_low_target): Add initializer for arch_setup field.
1849 * linux-xtensa-low.c (init_registers_xtensa): Add prototype.
1850 (the_low_target): Add initializer for arch_setup field.
1851
1852 * win32-low.h (struct win32_target_ops): Add arch_setup field.
1853 * win32-low.c (initialize_low): Call the_low_target.arch_setup ()
1854 instead of init_registers ().
1855 * win32-arm-low.c (init_registers_arm): Add prototype.
1856 (the_low_target): Add initializer for arch_setup field.
1857 * win32-i386-low.c (init_registers_i386): Add prototype.
1858 (the_low_target): Add initializer for arch_setup field.
1859
1860 * spu-low.c (init_registers_spu): Add prototype.
1861 (initialize_low): Call initialie_registers_spu () instead of
1862 initialize_registers ().
1863
1864 2008-02-19 Pedro Alves <pedro@codesourcery.com>
1865
1866 * server.c (handle_v_requests): When handling the vRun and vAttach
1867 packets, if already debugging a process, don't kill it. Return an
1868 error instead.
1869
1870 2008-02-17 Daniel Jacobowitz <dan@codesourcery.com>
1871
1872 * server.c (handle_query): Correct length check.
1873
1874 2008-02-14 Pedro Alves <pedro_alves@portugalmail.pt>
1875
1876 * win32-low.c (do_initial_child_stuff): Add process handle
1877 parameter. Set current_process_handle and current_process_id from the
1878 parameters. Clear globals.
1879 (win32_create_inferior): Don't set current_process_handle and
1880 current_process_id here. Instead pass them on the call to
1881 do_initial_child_stuff.
1882 (win32_attach): Likewise.
1883 (win32_clear_inferiors): New.
1884 (win32_kill): Don't close the current process handle or the
1885 current thread handle here. Instead call win32_clear_inferiors.
1886 (win32_detach): Don't open a new handle to the process. Call
1887 win32_clear_inferiors.
1888 (win32_join): Don't rely on current_process_handle; open a new
1889 handle using the process id.
1890 (win32_wait): Call win32_clear_inferiors when the inferior process
1891 has exited.
1892
1893 2008-02-14 Daniel Jacobowitz <dan@codesourcery.com>
1894
1895 * server.c (monitor_show_help): Add "exit".
1896
1897 2008-02-11 Maxim Grigoriev <maxim2405@gmail.com>
1898
1899 * Makefile.in (SFILES): Add linux-xtensa-low.c.
1900 (clean): Add reg-xtensa.c.
1901 (linux-xtensa-low.o, reg-xtensa.o, reg-xtensa.c): New dependencies.
1902 * configure.srv (xtensa*-*-linux*) New target.
1903 * linux-xtensa-low.c: New.
1904 * xtensa-xtregs.c: New.
1905
1906 2008-02-01 Pedro Alves <pedro_alves@portugalmail.pt>
1907
1908 * hostio.c: Don't include errno.h.
1909 (errno_to_fileio_errno): Move to hostio-errno.
1910 * hostio.c: (hostio_error): Remove the error parameter. Defer the
1911 error number outputting to the target->hostio_last_error callback.
1912 (hostio_packet_error): Use FILEIO_EINVAL directly.
1913 (handle_open, handle_pread, hostio_error, handle_unlink): Update
1914 calls to hostio_error.
1915 * hostio-errno.c: New.
1916 * server.h (hostio_last_error_from_errno): Declare.
1917 * target.h (target_ops): Add hostio_last_error member.
1918 * linux-low.c (linux_target_op): Register hostio_last_error_from_errno
1919 as hostio_last_error handler.
1920 * spu-low.c (spu_target_ops): Likewise.
1921 * win32-low.c [_WIN32_WCE] (win32_error_to_fileio_error)
1922 (wince_hostio_last_error): New functions.
1923 (win32_target_ops) [_WIN32_WCE]: Register wince_hostio_last_error
1924 as hostio_last_error handler.
1925 (win32_target_ops) [!_WIN32_WCE]: Register
1926 hostio_last_error_from_errno as hostio_last_error handler.
1927 * Makefile.in (SFILES): Add hostio.c and hostio-errno.c.
1928 (hostio-errno.o): New rule.
1929 * configure.ac (GDBSERVER_DEPFILES): Add $srv_hostio_err_objs.
1930 * configure.srv (srv_hostio_err_objs): New variable. Default to
1931 hostio-errno.o.
1932 (arm*-*-mingw32ce*): Set srv_hostio_err_objs to "".
1933 * configure: Regenerate.
1934
1935 2008-01-29 Daniel Jacobowitz <dan@codesourcery.com>
1936
1937 * linux-low.c (linux_attach_lwp): Do not _exit after errors.
1938 (linux_kill, linux_detach): Clean up the process list.
1939 * remote-utils.c (remote_open): Improve port number parsing.
1940 (putpkt_binary, input_interrupt): Only send interrupts if the target
1941 is running.
1942 * server.c (extended_protocol): Make static.
1943 (attached): Define earlier.
1944 (exit_requested, response_needed, program_argv): New variables.
1945 (target_running): New.
1946 (start_inferior): Clear attached here.
1947 (attach_inferior): Set attached here.
1948 (require_running): Define.
1949 (handle_query): Use require_running and target_running. Implement
1950 "monitor exit".
1951 (handle_v_attach, handle_v_run): New.
1952 (handle_v_requests): Use require_running. Handle vAttach and vRun.
1953 (gdbserver_usage): Update.
1954 (main): Redo argument parsing. Handle --debug and --multi. Handle
1955 --attach along with other options or after the port. Save
1956 program_argv. Support no initial program. Resynchronize
1957 communication with GDB after an error. Handle "monitor exit".
1958 Use require_running and target_running. Always allow the extended
1959 protocol. Do not error out for Hc0 or Hc-1. Do not automatically
1960 restart in extended mode.
1961 * README: Refer to the GDB manual. Update --attach usage.
1962
1963 2007-12-20 Andreas Schwab <schwab@suse.de>
1964
1965 * linux-low.c (STACK_SIZE): Define.
1966 (linux_tracefork_child): Use it. Use __clone2 on ia64.
1967 (linux_test_for_tracefork): Likewise.
1968
1969 2007-12-18 Daniel Jacobowitz <dan@codesourcery.com>
1970
1971 * linux-low.c (linux_wait_for_event): Update messages. Do not
1972 reinsert auto-delete breakpoints.
1973 * mem-break.c (struct breakpoint): Change return type of handler to
1974 int.
1975 (set_breakpoint_at): Update handler type.
1976 (reinsert_breakpoint_handler): Return 1 instead of calling
1977 delete_breakpoint.
1978 (reinsert_breakpoint_by_bp): Check for the original breakpoint before
1979 setting a new one.
1980 (check_breakpoints): Delete auto-delete breakpoints and return 2.
1981 * mem-break.h (set_breakpoint_at): Update handler type.
1982 * thread-db.c (thread_db_create_event, thread_db_create_event): Update.
1983 * win32-low.c (auto_delete_breakpoint): New.
1984 (get_child_debug_event): Use it.
1985
1986 2007-12-16 Daniel Jacobowitz <dan@codesourcery.com>
1987
1988 * configure.ac: Check for pread and pwrite.
1989 * hostio.c (handle_pread): Fall back to lseek and read.
1990 (handle_pwrite): Fall back to lseek and write.
1991 * config.in, configure: Regenerated.
1992
1993 2007-12-07 Daniel Jacobowitz <dan@codesourcery.com>
1994
1995 * server.c (myresume): Add own_buf argument.
1996 (main): Update calls.
1997
1998 2007-12-06 Daniel Jacobowitz <dan@codesourcery.com>
1999
2000 * linux-low.c (linux_wait, linux_resume): Do not handle async I/O.
2001 * remote-utils.c (remote_open): Do not call disable_async_io.
2002 (block_async_io): Delete.
2003 (unblock_async_io): Make static.
2004 (initialize_async_io): New.
2005 * server.c (handle_v_cont): Handle async I/O here.
2006 (myresume): Likewise. Move other common resume tasks here...
2007 (main): ... from here. Call initialize_async_io. Disable async
2008 I/O before the main loop.
2009 * server.h (initialize_async_io): Declare.
2010 (block_async_io, unblock_async_io): Delete prototypes.
2011 * spu-low.c (spu_resume, spu_wait): Do not handle async I/O here.
2012
2013 2007-12-06 Mick Davis <mickd@goanna.iinet.net.au>
2014
2015 * remote-utils.c (readchar): Allow binary data in received messages.
2016
2017 2007-12-03 Pedro Alves <pedro_alves@portugalmail.pt>
2018
2019 * win32-low.c (attaching): New global.
2020 (win32_create_inferior): Clear the `attaching' global.
2021 (win32_attach): Set the `attaching' global.
2022 (get_child_debug_event) [_WIN32_WCE]: Stop the inferior when
2023 attaching. Only set a breakpoint at the entry point if not
2024 attaching.
2025
2026 2007-12-03 Pedro Alves <pedro_alves@portugalmail.pt>
2027
2028 * server.c (main): Don't report dll events on the initial
2029 connection on attaches.
2030
2031 2007-12-03 Pedro Alves <pedro_alves@portugalmail.pt>
2032
2033 * server.c (main): Relax numerical bases supported for the pid of
2034 the --attach command line argument.
2035
2036 2007-12-03 Pedro Alves <pedro_alves@portugalmail.pt>
2037
2038 * win32-low.c (win32_attach): Call OpenProcess before
2039 DebugActiveProcess, not after. Add last error output to error
2040 call.
2041
2042 2007-12-03 Pedro Alves <pedro_alves@portugalmail.pt>
2043
2044 * win32-low.c (win32_get_thread_context)
2045 (win32_set_thread_context): New functions.
2046 (thread_rec): Use win32_get_thread_context.
2047 (continue_one_thread, win32_resume): Use win32_set_thread_context.
2048 * win32-low.h (win32_thread_info) [_WIN32_WCE]: Add `base_context'
2049 field.
2050
2051 2007-12-03 Leo Zayas
2052 Pedro Alves <pedro_alves@portugalmail.pt>
2053
2054 * win32-low.c (soft_interrupt_requested, faked_breakpoint): New
2055 global variables.
2056 (child_add_thread): Minor cleanup.
2057 (child_continue): Resume artificially suspended threads before
2058 calling ContinueDebugEvent.
2059 (suspend_one_thread): New.
2060 (fake_breakpoint_event): New.
2061 (get_child_debug_event): Change return type to int. Check here if
2062 gdb sent an interrupt request. If a soft interrupt was requested,
2063 fake a breakpoint event. Return 0 if there is no event to handle,
2064 and 1 otherwise.
2065 (win32_wait): Don't check here if gdb sent an interrupt request.
2066 Ensure there is a valid event to handle.
2067 (win32_request_interrupt): Add soft interruption method as last
2068 resort.
2069
2070 2007-12-03 Leo Zayas
2071 Pedro Alves <pedro_alves@portugalmail.pt>
2072
2073 * win32-low.h (win32_thread_info): Add descriptions to the
2074 structure members. Replace `suspend_count' counter by a
2075 `suspended' flag.
2076 * win32-low.c (thread_rec): Update condition of when to get the
2077 context from the inferior. Rely on ContextFlags being set if it
2078 has already been retrieved. Only suspend the inferior thread if
2079 we haven't already. Warn if that fails.
2080 (continue_one_thread): s/suspend_count/suspended/. Only call
2081 ResumeThread once. Warn if that fails.
2082
2083 2007-12-02 Pedro Alves <pedro_alves@portugalmail.pt>
2084
2085 * win32-low.c (win32_wait): Don't read from the inferior when it
2086 has already exited.
2087
2088 2007-12-02 Pedro Alves <pedro_alves@portugalmail.pt>
2089
2090 * Makefile.in (win32_low_h): New variable.
2091 (win32-low.o): Add dependency on $(win32_low_h).
2092 (win32-arm-low.o, win32-i386-low.o): New rules.
2093
2094 2007-11-30 Daniel Jacobowitz <dan@codesourcery.com>
2095
2096 * hostio.c: Correct copyright year.
2097
2098 2007-11-30 Daniel Jacobowitz <dan@codesourcery.com>
2099
2100 * Makefile.in (OBS): Add hostio.o.
2101 (hostio.o): New rule.
2102 * server.h (handle_vFile): Declare.
2103 * hostio.c: New file.
2104 * server.c (handle_v_requests): Take packet_len and new_packet_len
2105 for binary packets. Call handle_vFile.
2106 (main): Update call to handle_v_requests.
2107
2108 2007-11-05 Daniel Jacobowitz <dan@codesourcery.com>
2109
2110 * linux-low.c: Include <sched.h>.
2111
2112 2007-11-01 Daniel Jacobowitz <dan@codesourcery.com>
2113
2114 * linux-low.c (linux_tracefork_grandchild): New.
2115 (linux_tracefork_child): Use clone.
2116 (linux_test_for_tracefork): Use clone; allocate and free a stack.
2117
2118 2007-10-31 Joel Brobecker <brobecker@adacore.com>
2119
2120 * Makefile.in: Use $(SHELL) instead of "sh" to call regdat.sh.
2121
2122 2007-10-24 Daniel Jacobowitz <dan@codesourcery.com>
2123
2124 * linux-low.c (handle_extended_wait): Handle unexpected signals.
2125
2126 2007-10-23 Daniel Jacobowitz <dan@codesourcery.com>
2127
2128 * inferiors.c (change_inferior_id): Delete.
2129 (add_pid_to_list, pull_pid_from_list): New.
2130 * linux-low.c (PTRACE_SETOPTIONS, PTRACE_GETEVENTMSG)
2131 (PTRACE_O_TRACESYSGOOD, PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK)
2132 (PTRACE_O_TRACECLONE, PTRACE_O_TRACEEXEC, PTRACE_O_TRACEVFORKDONE)
2133 (PTRACE_O_TRACEEXIT, PTRACE_EVENT_FORK, PTRACE_EVENT_VFORK)
2134 (PTRACE_EVENT_CLONE, PTRACE_EVENT_EXEC, PTRACE_EVENT_VFORK_DONE)
2135 (PTRACE_EVENT_EXIT, __WALL): Provide default definitions.
2136 (stopped_pids, thread_db_active, must_set_ptrace_flags): New variables.
2137 (using_threads): Always set to 1.
2138 (handle_extended_wait): New.
2139 (add_process): Do not set TID.
2140 (linux_create_inferior): Set must_set_ptrace_flags.
2141 (linux_attach_lwp): Remove TID argument. Do not check using_threads.
2142 Use PTRACE_SETOPTIONS. Call new_thread_notify. Update all callers.
2143 (linux_thread_alive): Rename TID argument to LWPID.
2144 (linux_wait_for_process): Handle unknown processes. Do not use TID.
2145 (linux_wait_for_event): Do not use TID or check using_threads. Update
2146 call to dead_thread_notify. Call handle_extended_wait.
2147 (linux_create_inferior): Use PTRACE_SETOPTIONS.
2148 (send_sigstop): Delete sigstop_sent.
2149 (wait_for_sigstop): Avoid TID.
2150 (linux_supports_tracefork_flag, linux_tracefork_child, my_waitpid)
2151 (linux_test_for_tracefork): New.
2152 (linux_lookup_signals): Use thread_db_active and
2153 linux_supports_tracefork_flag.
2154 (initialize_low): Use thread_db_active and linux_test_for_tracefork.
2155 * linux-low.h (get_process_thread): Avoid TID.
2156 (struct process_ifo): Move thread_known and tid to the end. Remove
2157 sigstop_sent.
2158 (linux_attach_lwp, thread_db_init): Update prototypes.
2159 * server.h (change_inferior_id): Delete prototype.
2160 (add_pid_to_list, pull_pid_from_list): New prototypes.
2161 * thread-db.c (thread_db_use_events): New.
2162 (find_first_thread): Rename to...
2163 (find_one_thread): ...this. Update callers and messages. Do not
2164 call fatal. Check thread_db_use_events. Do not call
2165 change_inferior_id or new_thread_notify.
2166 (maybe_attach_thread): Update. Do not call new_thread_notify.
2167 (thread_db_init): Set thread_db_use_events. Check use_events.
2168 * utils.c (fatal, warning): Correct message prefix.
2169
2170 2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
2171
2172 * Makefile.in (clean): Remove new files.
2173 (powerpc-32.o, powerpc-32.c, powerpc-e500.o, powerpc-e500.c)
2174 (powerpc-64.o, powerpc-64.c): New rules.
2175 * configure.srv: Use alternate register sets for powerpc64-*-linux*
2176 with AltiVec, powerpc-*-linux* with AltiVec, and powerpc-*-linux*
2177 with SPE.
2178 * linux-ppc-low.c (ppc_regmap): Do not fetch the FP registers for
2179 SPE targets.
2180 (ppc_cannot_store_register): Do not check for FPSCR for SPE targets.
2181 (PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS, ppc_fill_vrregset)
2182 (ppc_store_vrregset, PTRACE_GETEVRREGS, PTRACE_SETEVRREGS)
2183 (struct gdb_evrregset_t, ppc_fill_evrregset, ppc_store_evrregset): New.
2184 (target_regsets): Add AltiVec and SPE register sets.
2185 * configure.ac: Check for AltiVec and SPE.
2186 * linux-ppc64-low.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS, SIZEOF_VRREGS)
2187 (ppc_fill_vrregset, ppc_store_vrregset): New.
2188 (target_regsets): Add AltiVec register set.
2189 * configure: Regenerated.
2190
2191 2007-09-19 Daniel Jacobowitz <dan@codesourcery.com>
2192
2193 * linux-low.c (O_LARGEFILE): Define.
2194 (linux_read_memory): Use /proc/PID/mem.
2195 * configure.ac: Use AC_GNU_SOURCE. Check for pread64.
2196 * configure, config.in: Regenerated.
2197
2198 2007-09-04 Daniel Jacobowitz <dan@codesourcery.com>
2199
2200 * linux-low.c (linux_wait_for_event): Do not pass signals while
2201 single-stepping.
2202
2203 2007-09-03 Pedro Alves <pedro_alves@portugalmail.pt>
2204
2205 * win32-low.c (create_process): New.
2206 (win32_create_inferior): Use create_process instead of
2207 CreateProcess. If create_process failed retry appending an ".exe"
2208 suffix. Store the GetLastError result immediatelly after
2209 create_process calls and use it on the call to error.
2210
2211 2007-09-03 Pedro Alves <pedro_alves@portugalmail.pt>
2212
2213 * win32-low.c (handle_load_dll): Don't use toolhelp when waiting.
2214
2215 2007-08-23 Joel Brobecker <brobecker@adacore.com>
2216
2217 * configure.ac: Switch license to GPLv3.
2218
2219 2007-08-01 Michael Snyder <msnyder@access-company.com>
2220
2221 * remote-utils.c (putpkt_binary): Memory leak, free buf2.
2222
2223 2007-07-31 Pedro Alves <pedro_alves@portugalmail.pt>
2224
2225 * win32-low.c (winapi_CloseToolhelp32Snapshot) [_WIN32_WCE]: New
2226 typedef.
2227 (win32_CloseToolhelp32Snapshot) [_WIN32_WCE]: New global var.
2228 (load_toolhelp) [_WIN32_WCE]: Load TOOLHELP.DLL. Get
2229 CloseToolhelp32Snapshot.
2230 (toolhelp_get_dll_name) [_WIN32_WCE]: Close the snapshot with
2231 CloseToolhelp32Snapshot.
2232
2233 2007-07-27 Michael Snyder <michael.snyder@access-company.com>
2234
2235 * server.c (main): Check for inferior exit before main loop.
2236
2237 2007-07-18 Pedro Alves <pedro_alves@portugalmail.pt>
2238
2239 * remote-utils.c (remote_open): Set SO_KEEPALIVE on remote_desc
2240 instead of on tmp_desc.
2241
2242 2007-07-17 Pedro Alves <pedro_alves@portugalmail.pt>
2243 Daniel Jacobowitz <dan@codesourcery.com>
2244
2245 * inferiors.c (all_dlls, dlls_changed, get_dll): New.
2246 (add_thread): Minor cleanups.
2247 (clear_inferiors): Move lower in the file. Clear the DLL
2248 list.
2249 (free_one_dll, match_dll, loaded_dll, unloaded_dll, clear_list): New.
2250 * remote-utils.c (prepare_resume_reply): Check dlls_changed.
2251 (xml_escape_text): New.
2252 * server.c (handle_query): Handle qXfer:libraries:read. Report it
2253 for qSupported.
2254 (handle_v_cont): Report errors.
2255 (gdbserver_version): Update.
2256 (main): Correct size of own_buf. Do not report initial DLL events.
2257 * server.h (struct dll_info, all_dlls, dlls_changed, loaded_dll)
2258 (unloaded_dll, xml_escape_text): New.
2259 * win32-low.c (enum target_waitkind): Update comments.
2260 (win32_add_one_solib, get_image_name, winapi_EnumProcessModules)
2261 (winapi_GetModuleInformation, winapi_GetModuleFileNameExA)
2262 (win32_EnumProcessModules, win32_GetModuleInformation)
2263 (win32_GetModuleFileNameExA, load_psapi, psapi_get_dll_name)
2264 (winapi_CreateToolhelp32Snapshot, winapi_Module32First)
2265 (winapi_Module32Next, win32_CreateToolhelp32Snapshot)
2266 (win32_Module32First, win32_Module32Next, load_toolhelp)
2267 (toolhelp_get_dll_name, handle_load_dll, handle_unload_dll): New.
2268 (get_child_debug_event): Handle DLL events.
2269 (win32_wait): Likewise.
2270
2271 2007-07-12 Daniel Jacobowitz <dan@codesourcery.com>
2272
2273 * configure.srv: Set srv_linux_regsets for sh*-*-linux*.
2274 * linux-sh-low.c (sh_fill_gregset, target_regsets): New.
2275
2276 2007-07-08 Pedro Alves <pedro_alves@portugalmail.pt>
2277
2278 * win32-low.c (handle_output_debug_string): Ignore event if not
2279 waiting.
2280
2281 2007-07-08 Pedro Alves <pedro_alves@portugalmail.pt>
2282
2283 * win32-arm-low.c (arm_wince_breakpoint): Fix typo.
2284
2285 2007-07-03 Daniel Jacobowitz <dan@codesourcery.com>
2286
2287 * remote-utils.c (look_up_one_symbol): Handle 'm' packets.
2288
2289 2007-07-02 Daniel Jacobowitz <dan@codesourcery.com>
2290
2291 * inferiors.c (change_inferior_id): Add comment.
2292 * linux-low.c (check_removed_breakpoint): Add an early
2293 prototype. Improve debug output.
2294 (linux_attach): Doc update.
2295 (linux_detach_one_process, linux_detach): Clean up before releasing
2296 each process.
2297 (send_sigstop, wait_for_sigstop): Improve comments and debug output.
2298 * linux-low.h (struct process_info): Doc improvement.
2299 * mem-break.c (delete_all_breakpoints): New.
2300 * mem-break.h (delete_all_breakpoints): New prototype.
2301 * thread-db.c (find_first_thread): New.
2302 (thread_db_create_event): Call it instead of
2303 thread_db_find_new_threads. Clean up unused variables.
2304 (maybe_attach_thread): Remove first thread handling.
2305 (thread_db_find_new_threads): Use find_first_thread.
2306 (thread_db_get_tls_address): Likewise.
2307
2308 2007-06-27 Daniel Jacobowitz <dan@codesourcery.com>
2309
2310 * thread-db.c (thread_db_find_new_threads): Add prototype.
2311 (thread_db_create_event): Check for the main thread before adding
2312 a new thread.
2313 (maybe_attach_thread): Only enable event reporting if TID == 0.
2314 (thread_db_get_tls_address): Check for new threads.
2315
2316 2007-06-20 Daniel Jacobowitz <dan@codesourcery.com>
2317
2318 * linux-low.c (linux_create_inferior): Try execv before execvp.
2319 * spu-low.c (spu_create_inferior): Likewise.
2320
2321 2007-06-13 Mike Frysinger <vapier@gentoo.org>
2322
2323 * linux-low.c (linux_create_inferior): Change execv to execvp.
2324 * spu-low.c (spu_create_inferior): Likewies.
2325
2326 2007-06-13 Daniel Jacobowitz <dan@codesourcery.com>
2327
2328 * Makefile.in (clean): Clean new files instead of deleted ones.
2329 (reg-mips.o, reg-mips.c, reg-mips64.o, reg-mips64.c): Delete.
2330 (mips-linux.o, mips-linux.c, mips64-linux.o, mips64-linux.c): New
2331 rules.
2332 * configure.srv: Specify XML files and new regformats for MIPS and
2333 MIPS64 GNU/Linux.
2334 * linux-mips-low.c (mips_num_regs): Set to only used registers.
2335 (mips_regmap): Do not fetch $0. Remove unused registers. Add
2336 an entry for the restart register.
2337 (mips_cannot_fetch_register, mips_cannot_store_register)
2338 (mips_reinsert_addr, mips_fill_fpregset, mips_store_fpregset): Update
2339 register names to match the XML descriptions.
2340 (mips_fill_gregset, mips_store_gregset): Likewise. Handle the
2341 restart register instead of $0.
2342
2343 2007-06-12 Ulrich Weigand <uweigand@de.ibm.com>
2344 Markus Deuling <deuling@de.ibm.com>
2345
2346 * remote-utils.c (decode_xfer_write): New function.
2347 * server.h (decode_xfer_write): Add prototype.
2348 * server.c (handle_query): Add PACKET_LEN argument. Support
2349 qXfer:spu:read and qXfer:spu:write packets.
2350 (main): Pass packet_len to handle_query.
2351 * spu-low.c (spu_target_ops): Add spu_proc_xfer_spu.
2352 * target.h (target_ops): Add qxfer_spu.
2353
2354 2007-06-12 Ulrich Weigand <uweigand@de.ibm.com>
2355
2356 * spu-low.c (spu_proc_xfer_spu): Do not return failure when
2357 accessing non-seekable spufs files.
2358
2359 2007-05-16 Markus Deuling <deuling@de.ibm.com>
2360
2361 * server.c (handle_query): Add reply for qC packet.
2362
2363 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2364 Leo Zayas <lerele@champenstudios@com>
2365
2366 * server.h (check_remote_input_interrupt_request): New function.
2367 * remote_utils.c (INVALID_DESCRIPTOR): New define.
2368 (remote_desc): Initialize with INVALID_DESCRIPTOR.
2369 (input_interrupt): Expose on USE_WIN32API too. Fix whitespace.
2370 (check_remote_input_interrupt_request): New function.
2371 * server.h (check_remote_input_interrupt_request): Declare.
2372 * win32-low.c (winapi_DebugBreakProcess,
2373 winapi_GenerateConsoleCtrlEvent): New typedefs.
2374 (get_child_debug_event): Lower Win32 debug event polling from 1 sec
2375 to 250 ms.
2376 (win32_wait): Check for remote interrupt request
2377 with check_remote_input_interrupt_request.
2378 (win32_request_interrupt): New function.
2379 (win32_target_op): Set request_interrupt to win32_request_interrupt.
2380
2381 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2382
2383 * win32-low.c (debug_registers_changed,
2384 debug_registers_used, CONTEXT_EXTENDED_REGISTERS,
2385 CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS,
2386 CONTEXT_DEBUGGER, CONTEXT_DEBUGGER_DR): Delete.
2387 (thread_rec): Get context using the low target.
2388 (child_add_thread): Call thread_added on the low target,
2389 which does the same thing.
2390 (regptr): Delete.
2391 (do_initial_child_stuff): Remove debug registers references.
2392 Set context using the low target. Resume threads after
2393 setting the contexts.
2394 (child_continue): Remove dead variable. Remove debug
2395 registers references.
2396 (child_fetch_inferior_registers): Go through the low target.
2397 (do_child_store_inferior_registers): Remove.
2398 (child_store_inferior_registers): Go through the low target.
2399 (win32_resume): Remove debug registers references.
2400 Set context using the low target.
2401 (handle_exception): Change return type to void. Don't record
2402 context here. Set status to TARGET_WAITKIND_SPURIOUS on a
2403 first chance exception.
2404 (get_child_debug_event): Change return type to void. Remove
2405 goto loop. Always return after waiting for debug event.
2406 (win32_wait): Convert to switch statement. Handle spurious
2407 events.
2408
2409 * win32-i386-low.c (debug_registers_changed,
2410 debug_registers_used): New.
2411 (initial_stuff): Rename to ...
2412 (i386_initial_stuff): ... this. Clear debug registers
2413 state variables.
2414 (store_debug_registers): Delete.
2415 (i386_get_thread_context): New.
2416 (load_debug_registers): Delete.
2417 (i386_set_thread_context): New.
2418 (i386_thread_added): New.
2419 (single_step): Rename to ...
2420 (i386_single_step): ... this.
2421 (do_fetch_inferior_registers): Rename to ...
2422 (i386_fetch_inferior_register): ... this.
2423 (i386_store_inferior_register): New.
2424 (the_low_target): Adapt to new interface.
2425
2426 * win32-arm-low.c (CONTEXT_FLOATING_POINT): Define.
2427 (arm_get_thread_context): New.
2428 (arm_set_thread_context): New.
2429 (regptr): New.
2430 (do_fetch_inferior_registers): Rename to ...
2431 (arm_fetch_inferior_register): ... this.
2432 (arm_store_inferior_register): New.
2433 (arm_wince_breakpoint): Reimplement as unsigned long.
2434 (arm_wince_breakpoint_len): Define.
2435 (the_low_target): Adapt to new interface.
2436
2437 * win32-low.h (target_ops): Remove regmap, store_debug_registers and
2438 load_debug_registers. Add get_thread_context, set_thread_context,
2439 thread_added and store_inferior_register. Rename
2440 fetch_inferior_registers to fetch_inferior_register.
2441 (regptr): Remove declaration.
2442
2443 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2444
2445 * linux-low.c (linux_detach): Change return type to int. Return 0.
2446 * spu-low.c (spu_detach): Likewise.
2447
2448 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2449
2450 * target.h (target_ops): Change return type of detach to int.
2451 Add join.
2452 (join_inferior): New.
2453 * server.c (main): Don't skip detach support on mingw32.
2454 If the inferior doesn't support detaching return error.
2455 Call join_inferior instead of using waitpid.
2456 * linux-low.c (linux_join): New.
2457 (linux_target_op): Add linux_join.
2458 * spu-low.c (spu_join): New.
2459 (spu_target_ops): Add spu_join.
2460 * win32-low.c (win32_detach): Adapt to new interface.
2461 Reopen current_process_handle before detaching. Issue a child
2462 resume before detaching.
2463 (win32_join): New.
2464 (win32_target_op): Add win32_join.
2465
2466 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2467
2468 * win32-low.c (win32-attach): Fix return value.
2469 * target.h (target_ops): Describe ATTACH return values.
2470
2471 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2472
2473 * win32-low.c (GETPROCADDRESS): Define.
2474 (winapi_DebugActiveProcessStop): Add WINAPI. typedef as pointer.
2475 (winapi_DebugSetProcessKillOnExit): Likewise.
2476 (win32_create_inferior): Force usage of ansi CreateProcessA.
2477 (win32_attach): Use GETPROCADDRESS.
2478 (win32_detach): Likewise.
2479
2480 2007-05-10 Pedro Alves <pedro_alves@portugalmail.pt>
2481
2482 * win32-low.c (win32_wait): Don't use WSTOPSIG.
2483
2484 2007-03-30 Pedro Alves <pedro_alves@portugalmail.pt>
2485
2486 * win32-low.c: Commit leftover changes from 2007-03-29.
2487
2488 2007-03-30 Daniel Jacobowitz <dan@codesourcery.com>
2489
2490 * i387-fp.c (struct i387_fsave, struct i387_fxsave): Make 16-bit
2491 fields short instead of int. Add explicit padding.
2492 (i387_cache_to_fsave): Remove unnecessary casts.
2493 (i387_fsave_to_cache): Doc fix.
2494 (i387_cache_to_fxsave): Remove unnecessary casts and masking.
2495
2496 2007-03-30 Daniel Jacobowitz <dan@codesourcery.com>
2497
2498 * i387-fp.c (i387_cache_to_fxsave): Reinitialize val2 before use.
2499 (i387_fxsave_to_cache): Check fp->ftag while building ftag value.
2500
2501 2007-03-29 Pedro Alves <pedro_alves@portugalmail.pt>
2502
2503 * configure.srv (arm*-*-mingw32ce*): Move near the other
2504 arm targets.
2505
2506 2007-03-29 Pedro Alves <pedro_alves@portugalmail.pt>
2507
2508 * configure.ac: Add errno checking.
2509 (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
2510 sys/file.h and malloc.h.
2511 (AC_CHECK_DECLS): Add perror.
2512 (srv_mingwce): Handle.
2513 * configure.srv (i[34567]86-*-cygwin*): Add
2514 win32-i386-low.o to srv_tgtobj.
2515 (i[34567]86-*-mingw*): Likewise.
2516 (arm*-*-mingw32ce*): Add case.
2517 * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
2518 HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
2519 [__MINGW32CE__] (strerror): New function.
2520 [__MINGW32CE__] (errno): Define to GetLastError.
2521 [__MINGW32CE__] (COUNTOF): New macro.
2522 (remote_open): Remove extra close call.
2523 * mem-break.c (delete_breakpoint_at): New function.
2524 * mem-break.h (delete_breakpoint_at): Declare.
2525 * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
2526 HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
2527 [USE_WIN32API] (read, write): Add char* casts.
2528 * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
2529 * server.h: Include wincecompat.h on Windows CE.
2530 [HAVE_ERRNO_H]: Check.
2531 (perror): Declare if not declared.
2532 * utils.c: Add stdlib.h, errno.h and malloc.h includes.
2533 (perror_with_name): Remove errno declaration.
2534 * wincecompat.h: New.
2535 * wincecompat.c: New.
2536 * win32-low.h: New.
2537 * win32-arm-low.c: New.
2538 * win32-i386-low.c: New.
2539 (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
2540 (OUTMSG2): Make it safe.
2541 (_T): New macro.
2542 (COUNTOF): New macro.
2543 (NUM_REGS): Get it from the low target.
2544 (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
2545 CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
2546 (thread_rec): Let low target handle debug registers.
2547 (child_add_thread): Likewise.
2548 (child_init_thread_list): Likewise.
2549 (continue_one_thread): Likewise.
2550 (regptr): New.
2551 (do_child_fetch_inferior_registers): Move to ...
2552 * win32-i386-low.c: ... here, and rename to ...
2553 (do_fetch_inferior_registers): ... this.
2554 * win32-low.c (child_fetch_inferior_registers):
2555 Go through the low target.
2556 (do_child_store_inferior_registers): Use regptr.
2557 (strwinerror): New function.
2558 (win32_create_inferior): Handle Windows CE.
2559 Use strwinerror instead of strerror on Windows error
2560 codes. Add program to the error output.
2561 Don't close the main thread handle on Windows CE.
2562 (win32_attach): Use coredll.dll on Windows CE.
2563 (win32_kill): Close current process and current
2564 thread handles.
2565 (win32_detach): Use coredll.dll on Windows CE.
2566 (win32_resume): Let low target handle debug registers, and
2567 step request.
2568 (handle_exception): Add/Remove initial breakpoint. Avoid
2569 non-existant WSTOPSIG on Windows CE.
2570 (win32_read_inferior_memory): Cast to remove warning.
2571 (win32_arch_string): Go through the low target.
2572 (initialize_low): Call set_breakpoint_data with the low
2573 target's breakpoint.
2574 * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
2575 FOP_REGNUM, mappings): Move to ...
2576 * win32-i386-low.c: ... here.
2577 * win32-low.c (win32_thread_info): Move to ...
2578 * win32-low.h: ... here.
2579 * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
2580 win32-arm-low.c and wincecompat.c.
2581 (all:): Add $EXEEXT.
2582 (install-only:): Likewise.
2583 (gdbserver:): Likewise.
2584 (gdbreplay:): Likewise.
2585 * config.in: Regenerate.
2586 * configure: Regenerate.
2587
2588 2007-03-28 Pedro Alves <pedro_alves@portugalmail.pt>
2589
2590 * win32-low.c: Rename typedef thread_info to
2591 win32_thread_info throughout.
2592
2593 2007-03-28 Pedro Alves <pedro_alves@portugalmail.pt>
2594
2595 * win32-i386-low.c: Rename to ...
2596 * win32-low.c: ... this.
2597 * configure.srv: Replace win32-i386-low.o with win32-low.o.
2598 * Makefile.in: Likewise.
2599
2600 2007-03-27 Pedro Alves <pedro_alves@portugalmail.pt>
2601
2602 * remote-utils.c (monitor_output): Constify msg parameter.
2603 * server.h (monitor_output): Likewise.
2604 * win32-i386-low.c (handle_output_debug_string): New.
2605 (win32_kill): Handle OUTPUT_DEBUG_STRING_EVENT events using
2606 handle_output_debug_string.
2607 (get_child_debug_event): Likewise.
2608
2609 2007-03-27 Mat Hostetter <mat@lcs.mit.edu>
2610
2611 * server.c (main): Correct strtoul check.
2612
2613 2007-03-27 Jon Ringle <jon@ringle.org>
2614
2615 * linux-low.c: Check __ARCH_HAS_MMU__ also.
2616
2617 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
2618
2619 * Makefile.in: Add dummy "pdf" and "install-pdf" targets.
2620
2621 2007-02-27 Daniel Jacobowitz <dan@codesourcery.com>
2622
2623 * terminal.h: Check HAVE_SGTTY_H.
2624
2625 2007-02-27 Mat Hostetter <mat@lcs.mit.edu>
2626
2627 * remote-utils.c (remote_open): Print out the assigned port number.
2628
2629 2007-02-26 Daniel Jacobowitz <dan@codesourcery.com>
2630
2631 * remote-utils.c (monitor_output): New function.
2632 * server.c (debug_threads): Define here.
2633 (monitor_show_help): New function.
2634 (handle_query): Handle qRcmd.
2635 (main): Do not handle 'd' packet.
2636 * server.h (debug_threads, remote_debug, monitor_output): Declare.
2637 * linux-low.c, spu-low.c, win32-i386-low.c: Remove definitions
2638 of debug_threads.
2639
2640 2007-02-25 Pedro Alves <pedro_alves@portugalmail.pt>
2641
2642 * Makefile.in (EXEEXT): New.
2643 (clean): Use $(EXEEXT).
2644
2645 2007-02-25 Pedro Alves <pedro_alves@portugalmail.pt>
2646
2647 * target.h (target_ops): Rename send_signal to request_interrupt,
2648 and remove enum target_signal parameter.
2649 * linux-low.c (linux_request_interrupt): Rename from
2650 linux_send_signal, and always send SIGINT.
2651 * spu-low.c (spu_request_interrupt): Rename from spu_send_signal,
2652 and always send SIGINT.
2653 * remote-utils.c (putpkt_binary): Call request_interrupt, instead
2654 of send_signal.
2655 (input_interrupt): Likewise.
2656
2657 2007-02-25 Pedro Alves <pedro_alves@portugalmail.pt>
2658
2659 * server.c (get_features_xml): Check if target implemented
2660 arch_string.
2661 * win32-i386-low.c (win32_arch_string): New.
2662 (win32_target_ops): Add win32_arch_string as arch_string member.
2663
2664 2007-02-22 Markus Deuling <deuling@de.ibm.com>
2665
2666 * spu-low.c (spu_arch_string): New.
2667 (spu_target_ops): Add spu_arch_string.
2668
2669 2007-02-16 Daniel Jacobowitz <dan@codesourcery.com>
2670
2671 * remote-utils.c: Remove HAVE_TERMINAL_H check.
2672 * configure.ac: Do not check for terminal.h.
2673 * configure, config.in: Regenerated.
2674
2675 2007-02-08 Daniel Jacobowitz <dan@codesourcery.com>
2676
2677 * Makefile.in (OBS): Add $(XML_BUILTIN).
2678 (XML_DIR, XML_TARGET, XML_FILES, XML_BUILTIN): New.
2679 (clean): Update.
2680 (target.xml, xml-builtin.c, stamp-xml, arm-with-iwmmxt.o)
2681 (arm-with-iwmmxt.c): New.
2682 * config.in, configure: Regenerate.
2683 * configure.ac: Check for iWMMXt. Handle srv_xmltarget,
2684 srv_xmlbuiltin, and srv_xmlfiles. Define USE_XML.
2685 * configure.srv: Mention srv_xmltarget and srv_xmlfiles.
2686 (arm*-*-linux*): Add iWMMXt and regset support.
2687 * linux-arm-low.c (PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS): Define.
2688 (arm_fill_gregset, arm_store_gregset, arm_fill_wmmxregset)
2689 (arm_store_wmmxregset, target_regsets): New.
2690 * server.c (get_features_xml): Take annex argument. Check builtin
2691 XML documents.
2692 (handle_query): Handle multiple annexes.
2693
2694 2007-01-29 Daniel Jacobowitz <dan@codesourcery.com>
2695
2696 * remote-utils.c [USE_WIN32API] (read, write): Define.
2697 (putpkt_binary, input_interrupt, readchar, getpkt): Use read and
2698 write.
2699
2700 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
2701
2702 * linux-i386-low.c (the_low_target): Set arch_string.
2703 * linux-x86-64-low.c (the_low_target): Likewise.
2704 * linux-low.c (linux_arch_string): New.
2705 (linux_target_ops): Add it.
2706 * linux-low.h (struct linux_target_ops): Add arch_string.
2707 * server.c (write_qxfer_response): Use const void * for DATA.
2708 (get_features_xml): New.
2709 (handle_query): Handle qXfer:features:read. Report it for qSupported.
2710 * target.h (struct target_ops): Add arch_string method.
2711
2712 2007-01-03 Denis Pilat <denis.pilat@st.com>
2713 Daniel Jacobowitz <dan@codesourcery.com>
2714
2715 * linux-low.c (linux_kill): Handle being called with no threads.
2716 * win32-i386-low.c (win32_kill): Likewise.
2717 (get_child_debug_event): Clear current_process_handle.
2718
2719 2006-12-30 Denis PILAT <denis.pilat@st.com>
2720 Daniel Jacobowitz <dan@codesourcery.com>
2721
2722 * remote-utils.c (remote_open): Check the type of specified
2723 serial port devices before opening them.
2724 * server.c (main): Kill the inferior if an error occurs during
2725 the first remote_open.
2726
2727 2006-12-05 Markus Deuling <deuling@de.ibm.com>
2728
2729 * README: Update supported targets.
2730
2731 2006-11-28 Daniel Jacobowitz <dan@codesourcery.com>
2732
2733 * Makefile.in (clean): Remove reg-mips64.c.
2734 (reg-mips64.c, reg-mips64.o): New rules.
2735 * configure.srv: Handle mips64. Include regset support for mips.
2736 * linux-mips-low.c (union mips_register): New.
2737 (mips_get_pc, mips_set_pc, mips_reinsert_addr): Use it.
2738 (mips_breakpoint, mips_breakpoint_at): Use int.
2739 (mips_collect_register, mips_supply_register)
2740 (mips_collect_register_32bit, mips_supply_register_32bit)
2741 (mips_fill_gregset, mips_store_gregset, mips_fill_fpregset)
2742 (mips_store_fpregset, target_regsets): New.
2743 * thread-db.c (thread_db_get_tls_address): Use uintptr_t.
2744
2745 2006-11-22 Ulrich Weigand <uweigand@de.ibm.com>
2746
2747 * configure.srv: Add target "spu*-*-*".
2748 * Makefile.in (clean): Remove reg-spu.c.
2749 (reg-spu.c, reg-spu.o, spu-low.o): Add dependencies.
2750 * spu-low.c: New file.
2751
2752 2006-11-16 Daniel Jacobowitz <dan@codesourcery.com>
2753
2754 * configure.ac: Correct td_thr_tls_get_addr test.
2755 * configure: Regenerated.
2756
2757 2006-11-16 Daniel Jacobowitz <dan@codesourcery.com>
2758
2759 * linux-low.c (linux_wait_for_event): Reformat. Use the
2760 pass_signals array.
2761 * remote-utils.c (decode_address_to_semicolon): New.
2762 * server.c (pass_signals, handle_general_set): New.
2763 (handle_query): Mention QPassSignals for qSupported.
2764 (main): Call handle_general_set.
2765 * server.h (pass_signals, decode_address_to_semicolon): New.
2766
2767 2006-11-06 Daniel Jacobowitz <dan@codesourcery.com>
2768
2769 * server.c (handle_query): Correct error handling for read_auxv.
2770
2771 2005-10-19 Ulrich Weigand <uweigand@de.ibm.com>
2772
2773 * configure.srv [s390-*-linux*, s390x-*-linux*]: Set srv_linux_regsets
2774 and srv_linux_thread_db to yes.
2775 * linux-s390-low.c (s390_fill_gregset): New function.
2776 (target_regsets): Define data structure.
2777
2778 2006-10-17 Daniel Jacobowitz <dan@codesourcery.com>
2779
2780 * acinclude.m4 (SRV_CHECK_TLS_GET_ADDR): New.
2781 * configure.ac: Use it. Define HAVE_TD_THR_TLS_GET_ADDR.
2782 * config.in, configure: Regenerated.
2783 * inferiors.c (gdb_id_to_thread): New function.
2784 (gdb_id_to_thread_id): Use it.
2785 * linux-low.c (linux_target_ops): Use thread_db_get_tls_address.
2786 * linux-low.h (struct process_info): Add th member.
2787 (thread_db_get_tls_address): New prototype.
2788 * remote-utils.c (decode_address): Make non-static.
2789 * server.c (handle_query): Handle qGetTLSAddr.
2790 * server.h (gdb_id_to_thread, decode_address): New prototypes.
2791 * target.h (struct target_ops): Add get_tls_address.
2792 * thread-db.c (maybe_attach_thread): Save the thread handle.
2793 (thread_db_get_tls_address): New.
2794
2795 2006-09-28 Daniel Jacobowitz <dan@codesourcery.com>
2796
2797 * linux-low.c (PTRACE_GETSIGINFO, PTRACE_SETSIGINFO): Define.
2798 (linux_resume_one_process): Take a siginfo_t *. Update all
2799 callers. Queue it if necessary. Use PTRACE_SETSIGINFO.
2800 (struct pending_signals): Add a siginfo_t.
2801 (linux_wait_for_process): Always set last_status.
2802 (linux_wait_for_event): Use PTRACE_GETSIGINFO.
2803 (linux_queue_one_thread): Use PTRACE_GETSIGINFO.
2804 * linux-low.h (struct process_info): Add last_status.
2805
2806 2006-09-21 Daniel Jacobowitz <dan@codesourcery.com>
2807
2808 * remote-utils.c (try_rle): New function.
2809 (putpkt_binary): Use it.
2810
2811 2006-08-19 Daniel Jacobowitz <dan@codesourcery.com>
2812
2813 * Makefile.in (clean): Clean reg-x86-64-linux.c.
2814 (reg-x86-64-linux.o, reg-x86-64-linux.c): New.
2815 * configure.srv (x86_64-*-linux*): Use reg-x86-64-linux.o.
2816 * linux-x86-64-low.c (x86_64_regmap): Include ORIG_RAX.
2817 (x86_64_fill_gregset, x86_64_store_gregset): Skip floating
2818 point registers.
2819
2820 2006-08-08 Richard Sandiford <richard@codesourcery.com>
2821
2822 * server.c (terminal_fd): New variable.
2823 (old_foreground_pgrp): Likewise.
2824 (restore_old_foreground_pgrp): New function.
2825 (start_inferior): Record the terminal file descriptor in terminal_fd
2826 and its original foreground group in old_foreground_pgrp. Register
2827 restore_old_foreground_pgrp with atexit().
2828
2829 2006-07-26 Daniel Jacobowitz <dan@codesourcery.com>
2830
2831 * server.c (handle_query): Correct qPart to qXfer.
2832
2833 2006-07-22 Daniel Jacobowitz <dan@codesourcery.com>
2834
2835 * configure.ac: Check for more headers which are missing on
2836 Windows. Automatically supply -lwsock32 and USE_WIN32API.
2837 * configure.srv: Add Cygwin and mingw32.
2838 * remote-utils.c: Don't include headers unconditionally which
2839 are missing on mingw32. Include <winsock.h> for mingw32.
2840 (remote_open): Adjust for mingw32 support. Flush
2841 standard error after writing to it.
2842 (remote_close, putpkt_binary, input_interrupt, block_async_io)
2843 (unblock_async_io, enable_async_io, disable_async_io)
2844 (readchar, getpkt): Update for Winsock support.
2845 (prepare_resume_reply): Expect a protocol signal number.
2846 * server.c: Disable <sys/wait.h> on mingw32.
2847 (start_inferior): Adjust for mingw32 support. Flush
2848 standard error after writing to it.
2849 (attach_inferior): Likewise. Use protocol signal
2850 numbers.
2851 (main): Skip 'D' packet on mingw32. Use protocol signal numbers
2852 and names.
2853 * win32-i386-low.c: New file.
2854 * Makefile.in (XM_CLIBS): Set.
2855 (gdbserver, gdbreplay): Use $(INTERNAL_CFLAGS).
2856 (win32-i386-low.o): New dependency rule.
2857 * linux-low.c (linux_wait): Use target signal numbers.
2858 * target.h (struct target_ops): Doc fix.
2859 * server.h (target_signal_to_name): New prototype.
2860 * gdbreplay.c: Don't include headers unconditionally which
2861 are missing on mingw32. Include <winsock.h> for mingw32.
2862 (remote_close, remote_open): Adjust for Winsock support.
2863 * configure, config.in: Regenerated.
2864
2865 2006-07-12 Daniel Jacobowitz <dan@codesourcery.com>
2866
2867 * server.c (decode_xfer_read, write_qxfer_response): New.
2868 (handle_query): Take a packet length argument. Handle
2869 qXfer:auxv:read instead of qPart:auxv:read. Mention it in
2870 the qSupported response.
2871 (main): Update call to handle_query.
2872
2873 2006-06-22 Daniel Jacobowitz <dan@codesourcery.com>
2874
2875 * remote-utils.c (remote_escape_output, remote_unescape_input): New.
2876 (putpkt_binary): Renamed from putpkt and adjusted for binary
2877 data.
2878 (putpkt): New wrapper for putpkt_binary.
2879 (readchar): Don't mask off the high bit.
2880 (decode_X_packet): New function.
2881 * server.c (main): Call putpkt_binary if a handler sets the packet
2882 length. Save the length of the incoming packet. Handle 'X'.
2883 * server.h (gdb_byte, remote_escape_output, decode_X_packet): New.
2884
2885 2006-06-21 Daniel Jacobowitz <dan@codesourcery.com>
2886
2887 * server.c (handle_query): Handle qSupported.
2888
2889 2006-05-30 Daniel Jacobowitz <dan@codesourcery.com>
2890
2891 * remote-utils.c (all_symbols_looked_up): New variable.
2892 (look_up_one_symbol): Check it.
2893 * server.h (look_up_one_symbol): New declaration.
2894 * thread-db.c (thread_db_init): Set all_symbols_looked_up.
2895
2896 2006-05-30 Daniel Jacobowitz <dan@codesourcery.com>
2897
2898 * Makefile.in (linux-arm-low.o): Update dependencies.
2899 * linux-arm-low.c: Include "gdb_proc_service.h".
2900 (PTRACE_GET_THREAD_AREA): Define.
2901 (ps_get_thread_area): New function.
2902
2903 2006-05-09 Nathan Sidwell <nathan@codesourcery.com>
2904
2905 * configure.srv (m68k*-*-uclinux*): New target.
2906 * linux-low.c (linux_create_inferior): Use vfork on mmuless systems.
2907 (linux_resume_one_process): Remove extraneous cast.
2908 (linux_read_offsets): New.
2909 (linux_target_op): Add linux_read_offsets on mmuless systems.
2910 * server.c (handle_query): Add qOffsets logic.
2911 * target.h (struct target_ops): Add read_offsets.
2912
2913 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
2914
2915 * linux-mips-low.c: Include <sys/ptrace.h> and "gdb_proc_service.h".
2916 (PTRACE_GET_THREAD_AREA): Define.
2917 (ps_get_thread_area): New function.
2918 * Makefile.in (linux-i386-low.o, linux-mips-low.o)
2919 (linux-x86-64-low.o): Update.
2920
2921 2006-03-15 Daniel Jacobowitz <dan@codesourcery.com>
2922
2923 * configure.ac: Remove checks for prfpregset_t.
2924 * gdb_proc_service.h: New file.
2925 * linux-i386-low.c, linux-x86-64-low.c, thread-db.c: Use the
2926 new "gdb_proc_service.h".
2927 * proc-service.c: Likewise.
2928 (ps_pglobal_lookup, ps_pdread, ps_pdwrite): Use psaddr_t.
2929 (ps_lgetfpregs, ps_lsetfpregs): Use a void* argument.
2930 * Makefile.in (gdb_proc_service_h): Updated.
2931 * configure, config.in: Regenerated.
2932
2933 2006-03-03 Daniel Jacobowitz <dan@codesourcery.com>
2934
2935 * remote-utils.c (prepare_resume_reply): Move declaration
2936 of gdb_id_from_wait to the top of the block.
2937
2938 2006-02-15 Daniel Jacobowitz <dan@codesourcery.com>
2939
2940 * linux-low.c (regsets_store_inferior_registers): Read the regset
2941 from the target before filling it.
2942
2943 2006-02-08 Daniel Jacobowitz <dan@codesourcery.com>
2944
2945 * server.c (attach_inferior): Return SIGTRAP for a successful
2946 attach.
2947
2948 2006-02-01 Daniel Jacobowitz <dan@codesourcery.com>
2949
2950 * Makefile.in (OBS): Add version.o.
2951 (STAGESTUFF): Delete.
2952 (version.o): Add dependencies.
2953 (version.c): Replace rule.
2954 (clean): Remove version.c.
2955 * server.c (gdbserver_version): New.
2956 (gdbserver_usage): Use printf.
2957 (main): Handle --version and --help.
2958 * server.h (version, host_name): Add declarations.
2959
2960 2005-12-23 Eli Zaretskii <eliz@gnu.org>
2961
2962 * linux-arm-low.c:
2963 * linux-arm-low.c:
2964 * inferiors.c:
2965 * i387-fp.h:
2966 * i387-fp.c:
2967 * gdbreplay.c:
2968 * regcache.c:
2969 * proc-service.c:
2970 * mem-break.h:
2971 * mem-break.c:
2972 * linux-x86-64-low.c:
2973 * linux-sh-low.c:
2974 * linux-s390-low.c:
2975 * linux-ppc64-low.c:
2976 * linux-ppc-low.c:
2977 * linux-mips-low.c:
2978 * linux-m68k-low.c:
2979 * linux-m32r-low.c:
2980 * linux-low.h:
2981 * linux-low.c:
2982 * linux-ia64-low.c:
2983 * linux-i386-low.c:
2984 * linux-crisv32-low.c:
2985 * thread-db.c:
2986 * terminal.h:
2987 * target.h:
2988 * target.c:
2989 * server.h:
2990 * server.c:
2991 * remote-utils.c:
2992 * regcache.h:
2993 * utils.c:
2994 * Makefile.in:
2995 * configure.ac:
2996 * gdbserver.1: Add (C) after Copyright. Update the FSF
2997 address.
2998
2999 2005-11-13 Daniel Jacobowitz <dan@codesourcery.com>
3000
3001 * linux-arm-low.c (arm_eabi_breakpoint): New variable.
3002 (arm_breakpoint_at): Recognize both breakpoints.
3003 (the_low_target): Use the correct breakpoint instruction.
3004
3005 2005-11-02 Daniel Jacobowitz <dan@codesourcery.com>
3006
3007 * configure.srv (x86_64-*-linux*): Turn on thread_db support.
3008 * linux-x86-64-low.c (x86_64_breakpoint, x86_64_breakpoint_len)
3009 (x86_64_get_pc, x86_64_set_pc, x86_64_breakpoint_at): New.
3010 (the_low_target): Update.
3011
3012 2005-10-25 Andreas Schwab <schwab@suse.de>
3013
3014 * server.c (main): Allocate mem_buf with PBUFSIZ bytes.
3015
3016 * linux-ia64-low.c (ia64_regmap): Remove NAT registers.
3017 (ia64_num_regs): Reduce to 462.
3018
3019 2005-09-17 Daniel Jacobowitz <dan@codesourcery.com>
3020
3021 * acinclude.m4: Correct quoting.
3022 * aclocal.m4: Regenerated.
3023
3024 Suggested by SZOKOVACS Robert <szo@ies.hu>:
3025 * thread-db.c (thread_db_err_str): Handle TD_VERSION.
3026 (thread_db_init): Call thread_db_err_str.
3027 * configure.ac: Check for TD_VERSION.
3028 * config.in, configure: Regenerated.
3029
3030 2005-07-31 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
3031
3032 * server.h (error, fatal, warning): Add ATTR_FORMAT.
3033
3034 2005-07-13 Daniel Jacobowitz <dan@codesourcery.com>
3035
3036 * configure.ac: Define HAVE_LINUX_REGSETS even if PTRACE_GETREGS
3037 is not available. Define HAVE_PTRACE_GETREGS if it is.
3038 * config.in, configure: Regenerated.
3039 * configure.srv: Set srv_linux_regsets for PowerPC and PowerPC64.
3040 * linux-i386-low.c, linux-m68k-low.c: Update to use
3041 HAVE_PTRACE_GETREGS.
3042 * linux-low.c (regsets_fetch_inferior_registers)
3043 (regsets_store_inferior_registers): Only return 0 if we processed
3044 GENERAL_REGS.
3045 * linux-ppc-low.c (ppc_fill_gregset, target_regsets): New.
3046 * linux-ppc64-low.c (ppc_fill_gregset, target_regsets): New.
3047
3048 2005-07-13 Daniel Jacobowitz <dan@codesourcery.com>
3049
3050 * inferiors.c (struct thread_info): Add gdb_id.
3051 (add_thread): Add gdb_id argument.
3052 (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): New.
3053 * linux-low.c (linux_create_inferior, linux_attach_lwp): Update
3054 calls to add_thread.
3055 * remote-utils.c (prepare_resume_reply: Use thread_to_gdb_id.
3056 * server.c (handle_query): Use thread_to_gdb_id.
3057 (handle_v_cont, main): Use gdb_id_to_thread_id.
3058 * server.h (add_thread): Update prototype.
3059 (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): New
3060 prototypes.
3061
3062 2005-07-13 Daniel Jacobowitz <dan@codesourcery.com>
3063
3064 * linux-low.c (fetch_register, usr_store_inferior_registers): Handle
3065 left-padded registers.
3066 * linux-low.h (struct linux_target_ops): Add left_pad_xfer.
3067 * linux-ppc64-low.c (the_low_target): Set left_pad_xfer.
3068
3069 2005-07-01 Steve Ellcey <sje@cup.hp.com>
3070
3071 * configure.ac (BFD_NEED_DECLARATION): Replace with AC_CHECK_DECLS.
3072 * configure: Regenerate.
3073 * config.in: Regenerate.
3074 * server.h (NEED_DECLARATION_STRERROR):
3075 Replace with !HAVE_DECL_STRERROR.
3076
3077 2005-06-16 Daniel Jacobowitz <dan@codesourcery.com>
3078
3079 * linux-low.c (linux_wait, linux_send_signal): Don't test
3080 an unsigned long variable for > 0 if it could be MAX_ULONG.
3081 * server.c (myresume): Likewise.
3082 * target.c (set_desired_inferior): Likewise.
3083
3084 2005-06-13 Mark Kettenis <kettenis@gnu.org>
3085
3086 * configure.ac: Simplify and improve check for socklen_t.
3087 * configure, config.in: Regenerate.
3088
3089 2005-06-12 Daniel Jacobowitz <dan@codesourcery.com>
3090
3091 * acconfig.h: Remove.
3092 * configure.ac: Add a test for socklen_t. Use three-argument
3093 AC_DEFINE throughout.
3094 * config.in: Regenerated using autoheader 2.59.
3095 * configure: Regenerated.
3096
3097 * gdbreplay.c (socklen_t): Provide a default.
3098 (remote_open): Use socklen_t.
3099 * remote-utils.c (socklen_t): Provide a default.
3100 (remote_open): Use socklen_t.
3101 (convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
3102 unsigned char.
3103
3104 * i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
3105 char for buffers.
3106 * linux-low.c (linux_read_memory, linux_write_memory)
3107 (linux_read_auxv): Likewise.
3108 * mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
3109 (check_mem_write): Likewise.
3110 * mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
3111 Likewise.
3112 * regcache.c (struct inferior_rgcache_data, registers_to_string)
3113 (registers_from_string, register_data): Likewise.
3114 * server.c (handle_query, main): Likewise.
3115 * server.h (convert_ascii_to_int, convert_int_to_ascii)
3116 (decode_M_packet): Likewise.
3117 * target.c (read_inferior_memory, write_inferior_memory): Likewise.
3118 * target.h (struct target_ops): Update read_memory, write_memory,
3119 and read_auxv.
3120 (read_inferior_memory, write_inferior_memory): Update.
3121 * linux-low.h (struct linux_target_ops): Change type of breakpoint
3122 to unsigned char *.
3123 * linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
3124 linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
3125 linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
3126 linux-s390-low.c, linux-sh-low.c: Update for changes in
3127 read_inferior_memory and the_low_target->breakpoint.
3128
3129 2005-05-28 Daniel Jacobowitz <dan@codesourcery.com>
3130
3131 * Makefile.in (SFILES): Add linux-ppc64-low.c.
3132 (linux-ppc64-low.o, reg-ppc64.c, reg-ppc64.o): New targets.
3133 * configure.srv: Add powerpc64-*-linux*.
3134 * linux-ppc64-low.c: New file.
3135
3136 2005-05-23 Orjan Friberg <orjanf@axis.com>
3137
3138 * linux-cris-low.c: New file with support for CRIS.
3139 * linux-crisv32-low.c: Ditto for CRISv32.
3140 * Makefile.in (SFILES): Add linux-cris-low.c, linux-crisv32-low.c.
3141 (clean): Add reg-cris.c and reg-crisv32.c.
3142 Add linux-cris-low.o, linux-crisv32-low.o, reg-cris.o, reg-cris.c,
3143 reg-crisv32.o, and reg-crisv32.c to make rules.
3144 * configure.srv: Add cris-*-linux* and crisv32-*-linux* to list of
3145 recognized targets.
3146
3147 2005-05-16 Ulrich Weigand <uweigand@de.ibm.com>
3148
3149 * linux-low.c (fetch_register): Ensure buffer size is a multiple
3150 of sizeof (PTRACE_XFER_TYPE).
3151 (usr_store_inferior_registers): Likewise. Zero out excess bytes.
3152
3153 2005-05-12 Orjan Friberg <orjanf@axis.com>
3154
3155 * target.h (struct target_ops): Add insert_watchpoint,
3156 remove_watchpoint, stopped_by_watchpoint, stopped_data_address function
3157 pointers for hardware watchpoint support.
3158 * linux-low.h (struct linux_target_ops): Ditto.
3159 * linux-low.c (linux_insert_watchpoint, linux_remove_watchpoint)
3160 (linux_stopped_by_watchpoint, linux_stopped_data_address): New. Add
3161 to linux_target_ops.
3162 * remote-utils.c (prepare_resume_reply): Add watchpoint information to
3163 reply packet.
3164 * server.c (main): Recognize 'Z' and 'z' packets.
3165
3166 2005-05-10 Ulrich Weigand <uweigand@de.ibm.com>
3167
3168 * linux-s390-low.c (s390_breakpoint, s390_breakpoint_len): Define.
3169 (s390_get_pc, s390_set_pc, s390_breakpoint_at): New functions.
3170 (the_low_target): Add new members.
3171
3172 2005-05-04 Daniel Jacobowitz <dan@codesourcery.com>
3173
3174 * proc-service.c (ps_lgetregs): Search all_processes instead of
3175 all_threads.
3176
3177 2005-05-04 Daniel Jacobowitz <dan@codesourcery.com>
3178
3179 * server.c (start_inferior): Change return type to int.
3180 (attach_inferior): Change sigptr to int *.
3181 (handle_v_cont, handle_v_requests): Change signal to int *.
3182 (main): Change signal to int.
3183
3184 2005-04-15 Kei Sakamoto <sakamoto.kei@renesas.com>
3185
3186 * Makefile.in: Add linux-m32r-low.o, reg-m32r.c and reg-m32r.o.
3187 * configure.srv: Add m32r*-*-linux*.
3188 * linux-m32r-low.c: New file.
3189
3190 2005-03-04 Daniel Jacobowitz <dan@codesourcery.com>
3191
3192 * Makefile.in (stamp-h): Set CONFIG_HEADERS explicitly.
3193
3194 2005-03-03 Daniel Jacobowitz <dan@codesourcery.com>
3195
3196 * inferiors.c (change_inferior_id, add_thread, find_inferior_id):
3197 Take unsigned long arguments for PIDs.
3198 * linux-low.c (add_process, linux_attach_lwp, linux_attach)
3199 (linux_thread_alive, linux_wait_for_event, kill_lwp, send_sigstop)
3200 (wait_for_sigstop, linux_resume_one_process)
3201 (regsets_fetch_inferior_registers, linux_send_signal)
3202 (linux_read_auxv): Likewise. Update the types of variables holding
3203 PIDs. Update format string specifiers.
3204 * linux-low.h (struct process_info, linux_attach_lwp): Likewise.
3205 * remote-utils.c (prepare_resume_reply): Likewise.
3206 * server.c (cont_thread, general_thread, step_thread)
3207 (thread_from_wait, old_thread_from_wait, signal_pid): Change type to
3208 unsigned long.
3209 (handle_query): Update format specifiers.
3210 (handle_v_cont, main): Use strtoul for thread IDs.
3211 * server.h (struct inferior_list_entry): Use unsigned long for ID.
3212 (add_thread, find_inferior_id, change_inferior_id, cont_thread)
3213 (general_thread, step_thread, thread_from_wait)
3214 (old_thread_from_wait): Update.
3215 * target.h (struct thread_resume): Use unsigned long for THREAD.
3216 (struct target_ops): Use unsigned long for arguments to attach and
3217 thread_alive.
3218
3219 2005-02-24 Daniel Jacobowitz <dan@codesourcery.com>
3220
3221 * acinclude.m4: Include bfd/bfd.m4 directly.
3222 * configure.ac: Use AC_ARG_PROGRAM. Suggested by Aron Griffis
3223 <agriffis@toolchain.org>.
3224 * aclocal.m4, configure: Regenerated.
3225
3226 2005-01-07 Andrew Cagney <cagney@gnu.org>
3227
3228 * configure.ac: Rename configure.in, require autoconf 2.59.
3229 * configure: Re-generate.
3230
3231 2004-12-08 Daniel Jacobowitz <dan@debian.org>
3232
3233 * acinclude.m4 (SRV_CHECK_THREAD_DB): Add ps_get_thread_area. Reset
3234 LIBS when finished.
3235 * aclocal.m4: Regenerated.
3236 * configure: Regenerated.
3237
3238 2004-11-21 Andreas Schwab <schwab@suse.de>
3239
3240 * linux-m68k-low.c (m68k_num_gregs): Define.
3241 (m68k_fill_gregset, m68k_store_gregset, m68k_fill_fpregset)
3242 (m68k_store_fpregset, target_regsets) [HAVE_LINUX_REGSETS]: New.
3243 (m68k_breakpoint, m68k_breakpoint_len, m68k_get_pc, m68k_set_pc)
3244 (m68k_breakpoint_at): New. Add to the_low_target.
3245
3246 * configure.srv (m68*-*-linux*): Set srv_linux_regsets and
3247 srv_linux_thread_db to yes.
3248
3249 2004-10-20 Joel Brobecker <brobecker@gnat.com>
3250
3251 * linux-x86-64-low.c (ARCH_SET_GS): Add definition if missing.
3252 (ARCH_SET_FS): Likewise.
3253 (ARCH_GET_FS): Likewise.
3254 (ARCH_GET_GS): Likewise.
3255
3256 2004-10-16 Daniel Jacobowitz <dan@debian.org>
3257
3258 * linux-i386-low.c (ps_get_thread_area): New.
3259 * linux-x86-64-low.c (ps_get_thread_area): New.
3260 * linux-low.c: Include <sys/syscall.h>.
3261 (linux_kill_one_process): Don't kill the first thread here.
3262 (linux_kill): Kill the first thread here.
3263 (kill_lwp): New function.
3264 (send_sigstop, linux_send_signal): Use it.
3265 * proc-service.c: Clean up #ifdefs.
3266 (fpregset_info): Delete.
3267 (ps_lgetregs): Update and enable implementation.
3268 (ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs): Remove disabled
3269 implementations.
3270 * remote-utils.c (struct sym_cache, symbol_cache): New.
3271 (input_interrupt): Print a clearer message.
3272 (async_io_enabled): New variable.
3273 (enable_async_io, disable_async_io): Use it. Update comments.
3274 (look_up_one_symbol): Use the symbol cache.
3275 * thread-db.c (thread_db_look_up_symbols): New function.
3276 (thread_db_init): Update comments. Call thread_db_look_up_symbols.
3277
3278 2004-10-16 Daniel Jacobowitz <dan@debian.org>
3279
3280 * configure.in: Test for -rdynamic.
3281 * configure: Regenerated.
3282 * Makefile (INTERNAL_LDFLAGS): New.
3283 (gdbserver, gdbreplay): Use it.
3284
3285 2004-09-02 Andrew Cagney <cagney@gnu.org>
3286
3287 * Makefile.in (TAGS): Replace TM_FILE with DEPRECATED_TM_FILE.
3288
3289 2004-03-23 Daniel Jacobowitz <drow@mvista.com>
3290
3291 * linux-low.c (linux_wait): Clear all_processes list also.
3292
3293 2004-03-12 Daniel Jacobowitz <drow@mvista.com>
3294
3295 * linux-low.c: Include <errno.h>. Remove extern declaration of
3296 errno.
3297
3298 2004-03-12 Daniel Jacobowitz <drow@mvista.com>
3299
3300 * gdbreplay.c, server.h, utils.c: Update copyright years.
3301
3302 2004-03-04 Nathan J. Williams <nathanw@wasabisystems.com>
3303
3304 * server.c (main): Print child status or termination signal from
3305 variable 'signal', not 'sig'.
3306
3307 2004-03-04 Nathan J. Williams <nathanw@wasabisystems.com>
3308
3309 * linux-low.c (linux_read_memory): Change return type to
3310 int. Check for and return error from ptrace().
3311 * target.c (read_inferior_memory): Change return type to int. Pass
3312 back return status from the_target->read_memory().
3313 * target.h (struct target_ops): Adapt *read_memory() prototype.
3314 Update comment.
3315 (read_inferior_memory): Adapt prototype.
3316 * server.c (main): Return an error packet if
3317 read_inferior_memory() returns an error.
3318
3319 2004-03-04 Daniel Jacobowitz <drow@mvista.com>
3320
3321 * Makefile.in (distclean): Remove config.h, stamp-h, and config.log.
3322 Unify with other clean targets.
3323
3324 2004-02-29 Daniel Jacobowitz <drow@mvista.com>
3325
3326 * server.c (handle_v_cont): Call set_desired_inferior.
3327
3328 2004-02-29 Daniel Jacobowitz <drow@mvista.com>
3329
3330 * remote-utils.c (prepare_resume_reply): Always supply "thread:".
3331
3332 2004-02-29 Daniel Jacobowitz <drow@mvista.com>
3333
3334 * linux-low.c (linux_wait): Unblock async I/O.
3335 (linux_resume): Block and enable async I/O.
3336 * remote-utils.c (block_async_io, unblock_async_io): New functions.
3337 * server.h (block_async_io, unblock_async_io): Add prototypes.
3338
3339 2004-02-29 Daniel Jacobowitz <drow@mvista.com>
3340
3341 * remote-utils.c (remote_open): Print a status notice after
3342 opening a TCP port.
3343 * server.c (attach_inferior): Print a status notice after
3344 attaching.
3345
3346 2004-02-29 Daniel Jacobowitz <drow@mvista.com>
3347
3348 * linux-arm-low.c (arm_get_pc): Print out stop PC in debug mode.
3349
3350 2004-02-26 Daniel Jacobowitz <drow@mvista.com>
3351
3352 * remote-utils.c (write_enn): Use "E01" instead of "ENN" for the
3353 error packet.
3354 * server.c, target.h: Update copyright years.
3355
3356 2004-02-25 Roland McGrath <roland@redhat.com>
3357
3358 * target.h (struct target_ops): New member `read_auxv'.
3359 * server.c (handle_query): Handle qPart:auxv:read: query using that.
3360 * linux-low.c (linux_read_auxv): New function.
3361 (linux_target_ops): Initialize `read_auxv' member to that.
3362
3363 2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
3364
3365 Committed by Jim Blandy <jimb@redhat.com>.
3366
3367 * linux-s390-low.c (s390_num_regs): Update.
3368 (s390_regmap): Remove control registers. Use __s390x__ predefine
3369 instead of GPR_SIZE to distiguish s390 and s390x targets.
3370
3371 2004-01-31 Daniel Jacobowitz <drow@mvista.com>
3372
3373 * linux-low.c: Update copyright year.
3374 (check_removed_breakpoint): Clear pending_is_breakpoint.
3375 (linux_set_resume_request, linux_queue_one_thread)
3376 (resume_status_pending_p): New functions.
3377 (linux_continue_one_thread): Use process->resume.
3378 (linux_resume): Only resume threads if there are no pending events.
3379 * linux-low.h (struct process_info): Add resume request
3380 pointer.
3381
3382 2004-01-30 Daniel Jacobowitz <drow@mvista.com>
3383
3384 * regcache.c (new_register_cache): Clear the allocated register
3385 buffer. Suggested by Atsushi Nemoto <anemo@mba.ocn.ne.jp>.
3386
3387 2003-10-13 Daniel Jacobowitz <drow@mvista.com>
3388
3389 * linux-low.c (linux_resume): Take a struct thread_resume *
3390 argument.
3391 (linux_wait): Update call.
3392 (resume_ptr): New static variable.
3393 (linux_continue_one_thread): Renamed from
3394 linux_continue_one_process. Use resume_ptr.
3395 (linux_resume): Use linux_continue_one_thread.
3396 * server.c (handle_v_cont, handle_v_requests): New functions.
3397 (myresume): New function.
3398 (main): Handle 'v' case.
3399 * target.h (struct thread_resume): New type.
3400 (struct target_ops): Change argument of "resume" to struct
3401 thread_resume *.
3402 (myresume): Delete macro.
3403
3404 2003-08-08 H.J. Lu <hongjiu.lu@intel.com>
3405
3406 * Makefile.in (install-only): Create dest dir. Support DESTDIR.
3407 (uninstall): Support DESTDIR.
3408
3409 Mon Jul 21 20:09:34 UTC 2003 Brendan Conoboy <blc@redhat.com>
3410
3411 * configure.srv: Add xscale*linux copy of arm*linux entry.
3412
3413 2003-07-24 Daniel Jacobowitz <drow@mvista.com>
3414
3415 * linux-arm-low.c (arm_reinsert_addr): New function.
3416 (the_low_target): Add arm_reinsert_addr.
3417
3418 2003-07-08 Mark Kettenis <kettenis@gnu.org>
3419
3420 * mem-break.c: Remove whitespace at end of file.
3421
3422 2003-06-28 Daniel Jacobowitz <drow@mvista.com>
3423
3424 * configure.in: Check whether we need to prototype strerror.
3425 * server.h: Optionally prototype strerror.
3426 * gdbreplay.c (perror_with_name): Use strerror.
3427 * linux-low.c (linux_attach_lwp): Use strerror.
3428 * utils.c (perror_with_name): Use strerror.
3429 * config.in, configure: Regenerated.
3430
3431 2003-06-28 Daniel Jacobowitz <drow@mvista.com>
3432
3433 * linux-sh-low.c (sh_regmap): Fix FP register offsets, reported by
3434 SUGIOKA Toshinobu <sugioka@itonet.co.jp>.
3435
3436 2003-06-20 Daniel Jacobowitz <drow@mvista.com>
3437
3438 * Makefile.in (SFILES): Update.
3439 * low-hppabsd.c, low-lynx.c, low-nbsd.c, low-sim.c, low-sparc.c,
3440 low-sun3.c: Remove files.
3441
3442 2003-06-17 Daniel Jacobowitz <drow@mvista.com>
3443
3444 * linux-low.c: Move comment to linux_thread_alive where it belonged.
3445 (linux_detach_one_process, linux_detach): New functions.
3446 (linux_target_ops): Add linux_detach.
3447 * server.c (main): Handle 'D' packet.
3448 * target.h (struct target_ops): Add "detach" member.
3449 (detach_inferior): Define.
3450
3451 2003-06-13 Mark Kettenis <kettenis@gnu.org>
3452
3453 From Kelley Cook <kelleycook@wideopenwest.com>:
3454 * configure.srv: Accept i[34567]86 variants.
3455
3456 2003-06-05 Daniel Jacobowitz <drow@mvista.com>
3457
3458 * linux-low.c (linux_wait_for_event): Correct comment typos.
3459 (linux_resume_one_process): Call check_removed_breakpoint.
3460 (linux_send_signal): New function.
3461 (linux_target_ops): Add linux_send_signal.
3462 * remote-utils.c (putpkt, input_interrupt): Use send_signal instead
3463 of kill.
3464 * target.h (struct target_ops): Add send_signal.
3465
3466 2003-05-29 Jim Blandy <jimb@redhat.com>
3467
3468 * linux-low.c (usr_store_inferior_registers): Transfer buf in
3469 PTRACE_XFER_TYPE-sized chunks, not int-sized chunks. Otherwise,
3470 if 'int' is smaller than PTRACE_XFER_TYPE, you end up throwing
3471 away part of the register's value.
3472
3473 2003-03-26 Daniel Jacobowitz <drow@mvista.com>
3474
3475 * linux-low.c (linux_create_inferior): Use __SIGRTMIN.
3476 (linux_wait_for_event, linux_init_signals): Likewise.
3477
3478 2003-03-17 Daniel Jacobowitz <drow@mvista.com>
3479
3480 * configure.in: Check for stdlib.h.
3481 * configure: Regenerated.
3482 * config.in: Regenerated.
3483
3484 2003-01-04 Andreas Schwab <schwab@suse.de>
3485
3486 * linux-m68k-low.c (m68k_num_regs): Define to 29 instead of 31.
3487
3488 2003-01-02 Andrew Cagney <ac131313@redhat.com>
3489
3490 * Makefile.in: Remove obsolete code.
3491
3492 2002-11-20 Daniel Jacobowitz <drow@mvista.com>
3493
3494 * linux-s390-low.c (s390_regmap): Check GPR_SIZE instead of
3495 defined(PT_FPR0_HI).
3496
3497 2002-11-17 Stuart Hughes <seh@zee2.com>
3498
3499 * linux-arm-low.c (arm_num_regs): Increase.
3500 (arm_regmap): Include status register.
3501
3502 2002-11-17 Daniel Jacobowitz <drow@mvista.com>
3503
3504 * linux-low.c (register_addr): Remove incorrect -1 check.
3505
3506 2002-08-29 Daniel Jacobowitz <drow@mvista.com>
3507
3508 * linux-low.c (linux_create_inferior): Call setpgid. Return
3509 the new PID.
3510 (unstopped_p, linux_signal_pid): Remove.
3511 (linux_target_ops): Remove linux_signal_pid.
3512 * remote-utils.c (putpkt, input_interrupt): Use signal_pid
3513 global instead of target method.
3514 * target.h (struct target_ops): Remove signal_pid. Update comment
3515 for create_inferior.
3516 * server.c (signal_pid): New variable.
3517 (create_inferior): Set signal_pid. Block SIGTTOU and SIGTTIN in
3518 gdbserver. Set the child to be the foreground process group.
3519 (attach_inferior): Set signal_pid.
3520
3521 2002-08-23 Daniel Jacobowitz <drow@mvista.com>
3522
3523 * ChangeLog: New file, with entries from gdb/ChangeLog after GDB 5.2.
3524
3525 2002-08-20 Jim Blandy <jimb@redhat.com>
3526
3527 * Makefile.in (LDFLAGS): Allow the configure script to establish a
3528 default for this.
3529
3530 2002-08-01 Andrew Cagney <cagney@redhat.com>
3531
3532 * Makefile.in: Make chill references obsolete.
3533
3534 2002-07-24 Kevin Buettner <kevinb@redhat.com>
3535
3536 * configure.in (unistd.h): Add to AC_CHECK_HEADERS list.
3537 * configure: Regenerate.
3538 * config.in: Regenerate.
3539
3540 2002-07-09 David O'Brien <obrien@FreeBSD.org>
3541
3542 * gdbreplay.c (stdlib.h, unistd.h): Conditionaly include.
3543 (perror_with_name, remote_close, remote_open, expect, play): Static.
3544
3545 2002-07-04 Michal Ludvig <mludvig@suse.cz>
3546
3547 * linux-x86-64-low.c (x86_64_regmap): Make it an array of
3548 byte offsets instead of an array of indexes.
3549 (x86_64_store_gregset, x86_64_store_fpregset): Parameter made const.
3550
3551 2002-06-13 Daniel Jacobowitz <drow@mvista.com>
3552
3553 * regcache.c: Add comment.
3554
3555 2002-06-11 Daniel Jacobowitz <drow@mvista.com>
3556
3557 * thread-db.c: New file.
3558 * proc-service.c: New file.
3559 * acinclude.m4: New file.
3560 * Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
3561 proc-service.o, and thread-db.o.
3562 (linux-low.o): Add USE_THREAD_DB.
3563 * acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
3564 HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
3565 * aclocal.m4: Regenerated.
3566 * config.in: Regenerated.
3567 * configure: Regenerated.
3568 * configure.in: Check for proc_service.h, sys/procfs.h,
3569 thread_db.h, and linux/elf.h headrs.
3570 Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
3571 PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
3572 Check for -lthread_db and thread support.
3573 * configure.srv: Enable thread_db support for ARM, i386, MIPS,
3574 PowerPC, and SuperH.
3575 * i387-fp.c: Constify arguments.
3576 * i387-fp.h: Likewise.
3577 * inferiors.c: (struct thread_info): Renamed from
3578 `struct inferior_info'. Remove PID member. Use generic inferior
3579 list header. All uses updated.
3580 (inferiors, signal_pid): Removed.
3581 (all_threads): New variable.
3582 (get_thread): Define.
3583 (add_inferior_to_list): New function.
3584 (for_each_inferior): New function.
3585 (change_inferior_id): New function.
3586 (add_inferior): Removed.
3587 (remove_inferior): New function.
3588 (add_thread): New function.
3589 (free_one_thread): New function.
3590 (remove_thread): New function.
3591 (clear_inferiors): Use for_each_inferior and free_one_thread.
3592 (find_inferior): New function.
3593 (find_inferior_id): New function.
3594 (inferior_target_data): Update argument type.
3595 (set_inferior_target_data): Likewise.
3596 (inferior_regcache_data): Likewise.
3597 (set_inferior_regcache_data): Likewise.
3598 * linux-low.c (linux_bp_reinsert): Remove.
3599 (all_processes, stopping_threads, using_thrads)
3600 (struct pending_signals, debug_threads, pid_of): New.
3601 (inferior_pid): Replace with macro.
3602 (struct inferior_linux_data): Remove.
3603 (get_stop_pc, add_process): New functions.
3604 (linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
3605 Use add_process and add_thread.
3606 (linux_attach_lwp): New function, based on old linux_attach. Use
3607 add_process and add_thread. Set stop_expected for new threads.
3608 (linux_attach): New function.
3609 (linux_kill_one_process): New function.
3610 (linux_kill): Kill all LWPs.
3611 (linux_thread_alive): Use find_inferior_id.
3612 (check_removed_breakpoints, status_pending_p): New functions.
3613 (linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
3614 Update. Use WNOHANG. Wait for cloned processes also. Update process
3615 struct for the found process.
3616 (linux_wait_for_event): New function.
3617 (linux_wait): Use it. Support LWPs.
3618 (send_sigstop, wait_for_sigstop, stop_all_processes)
3619 (linux_resume_one_process, linux_continue_one_process): New functions.
3620 (linux_resume): Support LWPs.
3621 (REGISTER_RAW_SIZE): Remove.
3622 (fetch_register): Use register_size instead. Call supply_register.
3623 (usr_store_inferior_registers): Likewise. Call collect_register.
3624 Fix recursive case.
3625 (regsets_fetch_inferior_registers): Improve error message.
3626 (regsets_store_inferior_registers): Add debugging.
3627 (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
3628 (unstopped_p, linux_signal_pid): New functions.
3629 (linux_target_ops): Add linux_signal_pid.
3630 (linux_init_signals): New function.
3631 (initialize_low): Call it. Initialize using_threads.
3632 * regcache.c (inferior_regcache_data): Add valid
3633 flag.
3634 (get_regcache): Fetch registers lazily. Add fetch argument
3635 and update all callers.
3636 (regcache_invalidate_one, regcache_invalidate): New
3637 functions.
3638 (new_register_cache): Renamed from create_register_cache.
3639 Return the new regcache.
3640 (free_register_cache): Change argument to a void *.
3641 (registers_to_string, registers_from_string): Call get_regcache
3642 with fetch flag set.
3643 (register_data): Make static. Pass fetch flag to get_regcache.
3644 (supply_register): Call get_regcache with fetch flag clear.
3645 (collect_register): Call get_regcache with fetch flag set.
3646 (collect_register_as_string): New function.
3647 * regcache.h: Update.
3648 * remote-utils.c (putpkt): Flush after debug output and use
3649 stderr.
3650 Handle input interrupts while waiting for an ACK.
3651 (input_interrupt): Use signal_pid method.
3652 (getpkt): Flush after debug output and use stderr.
3653 (outreg): Use collect_register_as_string.
3654 (new_thread_notify, dead_thread_notify): New functions.
3655 (prepare_resume_reply): Check using_threads. Set thread_from_wait
3656 and general_thread.
3657 (look_up_one_symbol): Flush after debug output.
3658 * server.c (step_thread, server_waiting): New variables.
3659 (start_inferior): Don't use signal_pid. Update call to mywait.
3660 (attach_inferior): Update call to mywait.
3661 (handle_query): Handle qfThreadInfo and qsThreadInfo.
3662 (main): Don't fetch/store registers explicitly. Use
3663 set_desired_inferior. Support proposed ``Hs'' packet. Update
3664 calls to mywait.
3665 * server.h: Update.
3666 (struct inferior_list, struct_inferior_list_entry): New.
3667 * target.c (set_desired_inferior): New.
3668 (write_inferior_memory): Constify.
3669 (mywait): New function.
3670 * target.h: Update.
3671 (struct target_ops): New signal_pid method.
3672 (mywait): Removed macro, added prototype.
3673
3674 * linux-low.h (regset_func): Removed.
3675 (regset_fill_func, regset_store_func): New.
3676 (enum regset_type): New.
3677 (struct regset_info): Add type field. Use new operation types.
3678 (struct linux_target_ops): stop_pc renamed to get_pc.
3679 Add decr_pc_after_break and breakpoint_at.
3680 (get_process, get_thread_proess, get_process_thread)
3681 (strut process_info, all_processes, linux_attach_lwp)
3682 (thread_db_init): New.
3683
3684 * linux-arm-low.c (arm_get_pc, arm_set_pc,
3685 arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
3686 (the_low_target): Add new members.
3687 * linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
3688 (i386_store_fpxregset): Constify.
3689 (target_regsets): Add new kind identifier.
3690 (i386_get_pc): Renamed from i386_stop_pc. Simplify.
3691 (i386_set_pc): Add debugging.
3692 (i386_breakpoint_at): New function.
3693 (the_low_target): Add new members.
3694 * linux-mips-low.c (mips_get_pc, mips_set_pc)
3695 (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
3696 (mips_breakpoint_at): New.
3697 (the_low_target): Add new members.
3698 * linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
3699 (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
3700 (the_low_target): Add new members.
3701 * linux-sh-low.c (sh_get_pc, sh_set_pc)
3702 (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
3703 (the_low_target): Add new members.
3704 * linux-x86-64-low.c (target_regsets): Add new kind
3705 identifier.
3706
3707 2002-05-15 Daniel Jacobowitz <drow@mvista.com>
3708
3709 From Martin Pool <mbp@samba.org>:
3710 * server.c (gdbserver_usage): New function.
3711 (main): Call it.
3712
3713 2002-05-14 Daniel Jacobowitz <drow@mvista.com>
3714
3715 * mem-break.c (reinsert_breakpoint_by_bp): Correct typo
3716 stop_at -> stop_pc.
3717
3718 2002-05-04 Andrew Cagney <ac131313@redhat.com>
3719
3720 * Makefile.in: Remove obsolete code.
3721
3722 2002-04-24 Michal Ludvig <mludvig@suse.cz>
3723
3724 * linux-low.c (regsets_fetch_inferior_registers),
3725 (regsets_store_inferior_registers): Removed cast to int from
3726 ptrace() calls.
3727 * regcache.h: Added declaration of struct inferior_info.
3728
3729 2002-04-20 Daniel Jacobowitz <drow@mvista.com>
3730
3731 * inferiors.c (struct inferior_info): Add regcache_data.
3732 (add_inferior): Call create_register_cache.
3733 (clear_inferiors): Call free_register_cache.
3734 (inferior_regcache_data, set_inferior_regcache_data): New functions.
3735 * regcache.c (struct inferior_regcache_data): New.
3736 (registers): Remove.
3737 (get_regcache): New function.
3738 (create_register_cache, free_register_cache): New functions.
3739 (set_register_cache): Don't initialize the register cache here.
3740 (registers_to_string, registers_from_string, register_data): Call
3741 get_regcache.
3742 * regcache.h: Add prototypes.
3743 * server.h: Likewise.
3744
3745 2002-04-20 Daniel Jacobowitz <drow@mvista.com>
3746
3747 * mem-break.c: New file.
3748 * mem-break.h: New file.
3749 * Makefile.in: Add mem-break.o rule; update server.h
3750 dependencies.
3751 * inferiors.c (struct inferior_info): Add target_data
3752 member.
3753 (clear_inferiors): Free target_data member if set.
3754 (inferior_target_data, set_inferior_target_data): New functions.
3755 * linux-i386-low.c (i386_breakpoint, i386_breakpoint_len)
3756 (i386_stop_pc, i386_set_pc): New. Add to the_low_target.
3757 * linux-low.c (linux_bp_reinsert): New variable.
3758 (struct inferior_linux_data): New.
3759 (linux_create_inferior): Use set_inferior_target_data.
3760 (linux_attach): Likewise. Call add_inferior.
3761 (linux_wait_for_one_inferior): New function.
3762 (linux_wait): Call it.
3763 (linux_write_memory): Add const.
3764 (initialize_low): Call set_breakpoint_data.
3765 * linux-low.h (struct linux_target_ops): Add breakpoint
3766 handling members.
3767 * server.c (attach_inferior): Remove extra add_inferior
3768 call.
3769 * server.h: Include mem-break.h. Update inferior.c
3770 prototypes.
3771 * target.c (read_inferior_memory)
3772 (write_inferior_memory): New functions.
3773 * target.h (read_inferior_memory)
3774 (write_inferior_memory): Change macros to prototypes.
3775 (struct target_ops): Update comments. Add const to write_memory
3776 definition.
3777
3778 2002-04-11 Daniel Jacobowitz <drow@mvista.com>
3779
3780 * linux-low.c (usr_store_inferior_registers): Support
3781 registers which are allowed to fail to store.
3782 * linux-low.h (linux_target_ops): Likewise.
3783 * linux-ppc-low.c (ppc_regmap): Support FPSCR.
3784 (ppc_cannot_store_register): FPSCR may not be storable.
3785
3786 2002-04-09 Daniel Jacobowitz <drow@mvista.com>
3787
3788 * server.h: Include <string.h> if HAVE_STRING_H.
3789 * ChangeLog: Correct paths in last ChangeLog entry.
3790
3791 2002-04-09 Daniel Jacobowitz <drow@mvista.com>
3792
3793 * linux-low.h: Remove obsolete prototypes.
3794 (struct linux_target_ops): New.
3795 (extern the_low_target): New.
3796 * linux-low.c (num_regs, regmap): Remove declarations.
3797 (register_addr): Use the_low_target explicitly.
3798 (fetch_register): Likewise.
3799 (usr_fetch_inferior_registers): Likewise.
3800 (usr_store_inferior_registers): Likewise.
3801 * linux-arm-low.c (num_regs): Remove.
3802 (arm_num_regs): Define.
3803 (arm_regmap): Renamed from regmap, made static.
3804 (arm_cannot_fetch_register): Renamed from cannot_fetch_register,
3805 made static.
3806 (arm_cannot_store_register): Renamed from cannot_store_register,
3807 made static.
3808 (the_low_target): New.
3809 * linux-i386-low.c (num_regs): Remove.
3810 (i386_num_regs): Define.
3811 (i386_regmap): Renamed from regmap, made static.
3812 (i386_cannot_fetch_register): Renamed from cannot_fetch_register,
3813 made static.
3814 (i386_cannot_store_register): Renamed from cannot_store_register,
3815 made static.
3816 (the_low_target): New.
3817 * linux-ia64-low.c (num_regs): Remove.
3818 (ia64_num_regs): Define.
3819 (ia64_regmap): Renamed from regmap, made static.
3820 (ia64_cannot_fetch_register): Renamed from cannot_fetch_register,
3821 made static.
3822 (ia64_cannot_store_register): Renamed from cannot_store_register,
3823 made static.
3824 (the_low_target): New.
3825 * linux-m68k-low.c (num_regs): Remove.
3826 (m68k_num_regs): Define.
3827 (m68k_regmap): Renamed from regmap, made static.
3828 (m68k_cannot_fetch_register): Renamed from cannot_fetch_register,
3829 made static.
3830 (m68k_cannot_store_register): Renamed from cannot_store_register,
3831 made static.
3832 (the_low_target): New.
3833 * linux-mips-low.c (num_regs): Remove.
3834 (mips_num_regs): Define.
3835 (mips_regmap): Renamed from regmap, made static.
3836 (mips_cannot_fetch_register): Renamed from cannot_fetch_register,
3837 made static.
3838 (mips_cannot_store_register): Renamed from cannot_store_register,
3839 made static.
3840 (the_low_target): New.
3841 * linux-ppc-low.c (num_regs): Remove.
3842 (ppc_num_regs): Define.
3843 (ppc_regmap): Renamed from regmap, made static.
3844 (ppc_cannot_fetch_register): Renamed from cannot_fetch_register,
3845 made static.
3846 (ppc_cannot_store_register): Renamed from cannot_store_register,
3847 made static.
3848 (the_low_target): New.
3849 * linux-s390-low.c (num_regs): Remove.
3850 (s390_num_regs): Define.
3851 (s390_regmap): Renamed from regmap, made static.
3852 (s390_cannot_fetch_register): Renamed from cannot_fetch_register,
3853 made static.
3854 (s390_cannot_store_register): Renamed from cannot_store_register,
3855 made static.
3856 (the_low_target): New.
3857 * linux-sh-low.c (num_regs): Remove.
3858 (sh_num_regs): Define.
3859 (sh_regmap): Renamed from regmap, made static.
3860 (sh_cannot_fetch_register): Renamed from cannot_fetch_register,
3861 made static.
3862 (sh_cannot_store_register): Renamed from cannot_store_register,
3863 made static.
3864 (the_low_target): New.
3865 * linux-x86-64-low.c (x86_64_regmap): Renamed from regmap.
3866 (the_low_target): New.
3867
3868 2002-04-09 Daniel Jacobowitz <drow@mvista.com>
3869
3870 * Makefile.in: Add stamp-h target.
3871 * configure.in: Create stamp-h.
3872 * configure: Regenerated.
3873
3874 2002-04-09 Daniel Jacobowitz <drow@mvista.com>
3875
3876 * inferiors.c: New file.
3877 * target.c: New file.
3878 * target.h: New file.
3879 * Makefile.in: Add target.o and inferiors.o. Update
3880 dependencies.
3881 * linux-low.c (inferior_pid): New static variable,
3882 moved from server.c.
3883 (linux_create_inferior): Renamed from create_inferior.
3884 Call add_inferior. Return 0 on success instead of a PID.
3885 (linux_attach): Renamed from myattach.
3886 (linux_kill): Renamed from kill_inferior. Call clear_inferiors ().
3887 (linux_thread_alive): Renamed from mythread_alive.
3888 (linux_wait): Renamed from mywait. Call clear_inferiors () if the
3889 child dies.
3890 (linux_resume): Renamed from myresume. Add missing ``return 0''.
3891 (regsets_store_inferior_registers): Correct error message.
3892 Add missing ``return 0''.
3893 (linux_fetch_registers): Renamed from fetch_inferior_registers.
3894 (linux_store_registers): Renamed from store_inferior_registers.
3895 (linux_read_memory): Renamed from read_inferior_memory.
3896 (linux_write_memory): Renamed from write_inferior_memory.
3897 (linux_target_ops): New structure.
3898 (initialize_low): Call set_target_ops ().
3899 * remote-utils.c (unhexify): New function.
3900 (hexify): New function.
3901 (input_interrupt): Send signals to ``signal_pid''.
3902 * server.c (inferior_pid): Remove.
3903 (start_inferior): Update create_inferior call.
3904 (attach_inferior): Call add_inferior.
3905 (handle_query): New function.
3906 (main): Call handle_query for `q' packets.
3907 * server.h: Include "target.h". Remove obsolete prototypes.
3908 Add prototypes for "inferiors.c", "target.c", hexify, and unhexify.
3909
3910 2002-04-09 Daniel Jacobowitz <drow@mvista.com>
3911
3912 * Makefile.in: Add WARN_CFLAGS. Update configury
3913 dependencies.
3914 * configure.in: Check for <string.h>
3915 * configure: Regenerate.
3916 * config.in: Regenerate.
3917 * gdbreplay.c: Include needed system headers.
3918 (remote_open): Remove strchr prototype.
3919 * linux-low.h: Correct #ifdef to HAVE_LINUX_USRREGS.
3920 * regcache.c (supply_register): Change buf argument to const void *.
3921 (supply_register_by_name): Likewise.
3922 (collect_register): Change buf argument to void *.
3923 (collect_register_by_name): Likewise.
3924 * regcache.h: Add missing prototypes.
3925 * remote-utils.c: Include <arpa/inet.h> for inet_ntoa.
3926 * server.c (handle_query): New function.
3927 (attached): New static variable, moved out of main.
3928 (main): Quiet longjmp clobber warnings.
3929 * server.h: Add ATTR_NORETURN and ATTR_FORMAT. Update prototypes.
3930 * utils.c (error): Remove NORETURN.
3931 (fatal): Likewise.
This page took 0.120606 seconds and 5 git commands to generate.