Move doc/ entries into doc/ChangeLog.
[deliverable/binutils-gdb.git] / gdb / go32-nat.c
1 /* Native debugging support for Intel x86 running DJGPP.
2 Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
3 Written by Robert Hoehne.
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
21
22 #include <fcntl.h>
23
24 #include "defs.h"
25 #include "inferior.h"
26 #include "gdb_wait.h"
27 #include "gdbcore.h"
28 #include "command.h"
29 #include "gdbcmd.h"
30 #include "floatformat.h"
31 #include "buildsym.h"
32 #include "i387-tdep.h"
33 #include "i386-tdep.h"
34 #include "value.h"
35 #include "regcache.h"
36 #include "gdb_string.h"
37
38 #include <stdio.h> /* might be required for __DJGPP_MINOR__ */
39 #include <stdlib.h>
40 #include <ctype.h>
41 #include <errno.h>
42 #include <unistd.h>
43 #include <sys/utsname.h>
44 #include <io.h>
45 #include <dos.h>
46 #include <dpmi.h>
47 #include <go32.h>
48 #include <sys/farptr.h>
49 #include <debug/v2load.h>
50 #include <debug/dbgcom.h>
51 #if __DJGPP_MINOR__ > 2
52 #include <debug/redir.h>
53 #endif
54
55 #if __DJGPP_MINOR__ < 3
56 /* This code will be provided from DJGPP 2.03 on. Until then I code it
57 here */
58 typedef struct
59 {
60 unsigned short sig0;
61 unsigned short sig1;
62 unsigned short sig2;
63 unsigned short sig3;
64 unsigned short exponent:15;
65 unsigned short sign:1;
66 }
67 NPXREG;
68
69 typedef struct
70 {
71 unsigned int control;
72 unsigned int status;
73 unsigned int tag;
74 unsigned int eip;
75 unsigned int cs;
76 unsigned int dataptr;
77 unsigned int datasel;
78 NPXREG reg[8];
79 }
80 NPX;
81
82 static NPX npx;
83
84 static void save_npx (void); /* Save the FPU of the debugged program */
85 static void load_npx (void); /* Restore the FPU of the debugged program */
86
87 /* ------------------------------------------------------------------------- */
88 /* Store the contents of the NPX in the global variable `npx'. */
89 /* *INDENT-OFF* */
90
91 static void
92 save_npx (void)
93 {
94 asm ("inb $0xa0, %%al \n\
95 testb $0x20, %%al \n\
96 jz 1f \n\
97 xorb %%al, %%al \n\
98 outb %%al, $0xf0 \n\
99 movb $0x20, %%al \n\
100 outb %%al, $0xa0 \n\
101 outb %%al, $0x20 \n\
102 1: \n\
103 fnsave %0 \n\
104 fwait "
105 : "=m" (npx)
106 : /* No input */
107 : "%eax");
108 }
109
110 /* *INDENT-ON* */
111
112
113 /* ------------------------------------------------------------------------- */
114 /* Reload the contents of the NPX from the global variable `npx'. */
115
116 static void
117 load_npx (void)
118 {
119 asm ("frstor %0":"=m" (npx));
120 }
121 /* ------------------------------------------------------------------------- */
122 /* Stubs for the missing redirection functions. */
123 typedef struct {
124 char *command;
125 int redirected;
126 } cmdline_t;
127
128 void
129 redir_cmdline_delete (cmdline_t *ptr)
130 {
131 ptr->redirected = 0;
132 }
133
134 int
135 redir_cmdline_parse (const char *args, cmdline_t *ptr)
136 {
137 return -1;
138 }
139
140 int
141 redir_to_child (cmdline_t *ptr)
142 {
143 return 1;
144 }
145
146 int
147 redir_to_debugger (cmdline_t *ptr)
148 {
149 return 1;
150 }
151
152 int
153 redir_debug_init (cmdline_t *ptr)
154 {
155 return 0;
156 }
157 #endif /* __DJGPP_MINOR < 3 */
158
159 typedef enum { wp_insert, wp_remove, wp_count } wp_op;
160
161 /* This holds the current reference counts for each debug register. */
162 static int dr_ref_count[4];
163
164 #define SOME_PID 42
165
166 static int prog_has_started = 0;
167 static void go32_open (char *name, int from_tty);
168 static void go32_close (int quitting);
169 static void go32_attach (char *args, int from_tty);
170 static void go32_detach (char *args, int from_tty);
171 static void go32_resume (ptid_t ptid, int step,
172 enum target_signal siggnal);
173 static ptid_t go32_wait (ptid_t ptid,
174 struct target_waitstatus *status);
175 static void go32_fetch_registers (int regno);
176 static void store_register (int regno);
177 static void go32_store_registers (int regno);
178 static void go32_prepare_to_store (void);
179 static int go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
180 int write,
181 struct mem_attrib *attrib,
182 struct target_ops *target);
183 static void go32_files_info (struct target_ops *target);
184 static void go32_stop (void);
185 static void go32_kill_inferior (void);
186 static void go32_create_inferior (char *exec_file, char *args, char **env, int from_tty);
187 static void go32_mourn_inferior (void);
188 static int go32_can_run (void);
189
190 static struct target_ops go32_ops;
191 static void go32_terminal_init (void);
192 static void go32_terminal_inferior (void);
193 static void go32_terminal_ours (void);
194
195 #define r_ofs(x) (offsetof(TSS,x))
196
197 static struct
198 {
199 size_t tss_ofs;
200 size_t size;
201 }
202 regno_mapping[] =
203 {
204 {r_ofs (tss_eax), 4}, /* normal registers, from a_tss */
205 {r_ofs (tss_ecx), 4},
206 {r_ofs (tss_edx), 4},
207 {r_ofs (tss_ebx), 4},
208 {r_ofs (tss_esp), 4},
209 {r_ofs (tss_ebp), 4},
210 {r_ofs (tss_esi), 4},
211 {r_ofs (tss_edi), 4},
212 {r_ofs (tss_eip), 4},
213 {r_ofs (tss_eflags), 4},
214 {r_ofs (tss_cs), 2},
215 {r_ofs (tss_ss), 2},
216 {r_ofs (tss_ds), 2},
217 {r_ofs (tss_es), 2},
218 {r_ofs (tss_fs), 2},
219 {r_ofs (tss_gs), 2},
220 {0, 10}, /* 8 FP registers, from npx.reg[] */
221 {1, 10},
222 {2, 10},
223 {3, 10},
224 {4, 10},
225 {5, 10},
226 {6, 10},
227 {7, 10},
228 /* The order of the next 7 registers must be consistent
229 with their numbering in config/i386/tm-i386.h, which see. */
230 {0, 2}, /* control word, from npx */
231 {4, 2}, /* status word, from npx */
232 {8, 2}, /* tag word, from npx */
233 {16, 2}, /* last FP exception CS from npx */
234 {12, 4}, /* last FP exception EIP from npx */
235 {24, 2}, /* last FP exception operand selector from npx */
236 {20, 4}, /* last FP exception operand offset from npx */
237 {18, 2} /* last FP opcode from npx */
238 };
239
240 static struct
241 {
242 int go32_sig;
243 enum target_signal gdb_sig;
244 }
245 sig_map[] =
246 {
247 {0, TARGET_SIGNAL_FPE},
248 {1, TARGET_SIGNAL_TRAP},
249 /* Exception 2 is triggered by the NMI. DJGPP handles it as SIGILL,
250 but I think SIGBUS is better, since the NMI is usually activated
251 as a result of a memory parity check failure. */
252 {2, TARGET_SIGNAL_BUS},
253 {3, TARGET_SIGNAL_TRAP},
254 {4, TARGET_SIGNAL_FPE},
255 {5, TARGET_SIGNAL_SEGV},
256 {6, TARGET_SIGNAL_ILL},
257 {7, TARGET_SIGNAL_EMT}, /* no-coprocessor exception */
258 {8, TARGET_SIGNAL_SEGV},
259 {9, TARGET_SIGNAL_SEGV},
260 {10, TARGET_SIGNAL_BUS},
261 {11, TARGET_SIGNAL_SEGV},
262 {12, TARGET_SIGNAL_SEGV},
263 {13, TARGET_SIGNAL_SEGV},
264 {14, TARGET_SIGNAL_SEGV},
265 {16, TARGET_SIGNAL_FPE},
266 {17, TARGET_SIGNAL_BUS},
267 {31, TARGET_SIGNAL_ILL},
268 {0x1b, TARGET_SIGNAL_INT},
269 {0x75, TARGET_SIGNAL_FPE},
270 {0x78, TARGET_SIGNAL_ALRM},
271 {0x79, TARGET_SIGNAL_INT},
272 {0x7a, TARGET_SIGNAL_QUIT},
273 {-1, TARGET_SIGNAL_LAST}
274 };
275
276 static struct {
277 enum target_signal gdb_sig;
278 int djgpp_excepno;
279 } excepn_map[] = {
280 {TARGET_SIGNAL_0, -1},
281 {TARGET_SIGNAL_ILL, 6}, /* Invalid Opcode */
282 {TARGET_SIGNAL_EMT, 7}, /* triggers SIGNOFP */
283 {TARGET_SIGNAL_SEGV, 13}, /* GPF */
284 {TARGET_SIGNAL_BUS, 17}, /* Alignment Check */
285 /* The rest are fake exceptions, see dpmiexcp.c in djlsr*.zip for
286 details. */
287 {TARGET_SIGNAL_TERM, 0x1b}, /* triggers Ctrl-Break type of SIGINT */
288 {TARGET_SIGNAL_FPE, 0x75},
289 {TARGET_SIGNAL_INT, 0x79},
290 {TARGET_SIGNAL_QUIT, 0x7a},
291 {TARGET_SIGNAL_ALRM, 0x78}, /* triggers SIGTIMR */
292 {TARGET_SIGNAL_PROF, 0x78},
293 {TARGET_SIGNAL_LAST, -1}
294 };
295
296 static void
297 go32_open (char *name, int from_tty)
298 {
299 printf_unfiltered ("Done. Use the \"run\" command to run the program.\n");
300 }
301
302 static void
303 go32_close (int quitting)
304 {
305 }
306
307 static void
308 go32_attach (char *args, int from_tty)
309 {
310 error (_("\
311 You cannot attach to a running program on this platform.\n\
312 Use the `run' command to run DJGPP programs."));
313 }
314
315 static void
316 go32_detach (char *args, int from_tty)
317 {
318 }
319
320 static int resume_is_step;
321 static int resume_signal = -1;
322
323 static void
324 go32_resume (ptid_t ptid, int step, enum target_signal siggnal)
325 {
326 int i;
327
328 resume_is_step = step;
329
330 if (siggnal != TARGET_SIGNAL_0 && siggnal != TARGET_SIGNAL_TRAP)
331 {
332 for (i = 0, resume_signal = -1;
333 excepn_map[i].gdb_sig != TARGET_SIGNAL_LAST; i++)
334 if (excepn_map[i].gdb_sig == siggnal)
335 {
336 resume_signal = excepn_map[i].djgpp_excepno;
337 break;
338 }
339 if (resume_signal == -1)
340 printf_unfiltered ("Cannot deliver signal %s on this platform.\n",
341 target_signal_to_name (siggnal));
342 }
343 }
344
345 static char child_cwd[FILENAME_MAX];
346
347 static ptid_t
348 go32_wait (ptid_t ptid, struct target_waitstatus *status)
349 {
350 int i;
351 unsigned char saved_opcode;
352 unsigned long INT3_addr = 0;
353 int stepping_over_INT = 0;
354
355 a_tss.tss_eflags &= 0xfeff; /* reset the single-step flag (TF) */
356 if (resume_is_step)
357 {
358 /* If the next instruction is INT xx or INTO, we need to handle
359 them specially. Intel manuals say that these instructions
360 reset the single-step flag (a.k.a. TF). However, it seems
361 that, at least in the DPMI environment, and at least when
362 stepping over the DPMI interrupt 31h, the problem is having
363 TF set at all when INT 31h is executed: the debuggee either
364 crashes (and takes the system with it) or is killed by a
365 SIGTRAP.
366
367 So we need to emulate single-step mode: we put an INT3 opcode
368 right after the INT xx instruction, let the debuggee run
369 until it hits INT3 and stops, then restore the original
370 instruction which we overwrote with the INT3 opcode, and back
371 up the debuggee's EIP to that instruction. */
372 read_child (a_tss.tss_eip, &saved_opcode, 1);
373 if (saved_opcode == 0xCD || saved_opcode == 0xCE)
374 {
375 unsigned char INT3_opcode = 0xCC;
376
377 INT3_addr
378 = saved_opcode == 0xCD ? a_tss.tss_eip + 2 : a_tss.tss_eip + 1;
379 stepping_over_INT = 1;
380 read_child (INT3_addr, &saved_opcode, 1);
381 write_child (INT3_addr, &INT3_opcode, 1);
382 }
383 else
384 a_tss.tss_eflags |= 0x0100; /* normal instruction: set TF */
385 }
386
387 /* The special value FFFFh in tss_trap indicates to run_child that
388 tss_irqn holds a signal to be delivered to the debuggee. */
389 if (resume_signal <= -1)
390 {
391 a_tss.tss_trap = 0;
392 a_tss.tss_irqn = 0xff;
393 }
394 else
395 {
396 a_tss.tss_trap = 0xffff; /* run_child looks for this */
397 a_tss.tss_irqn = resume_signal;
398 }
399
400 /* The child might change working directory behind our back. The
401 GDB users won't like the side effects of that when they work with
402 relative file names, and GDB might be confused by its current
403 directory not being in sync with the truth. So we always make a
404 point of changing back to where GDB thinks is its cwd, when we
405 return control to the debugger, but restore child's cwd before we
406 run it. */
407 /* Initialize child_cwd, before the first call to run_child and not
408 in the initialization, so the child get also the changed directory
409 set with the gdb-command "cd ..." */
410 if (!*child_cwd)
411 /* Initialize child's cwd with the current one. */
412 getcwd (child_cwd, sizeof (child_cwd));
413
414 chdir (child_cwd);
415
416 #if __DJGPP_MINOR__ < 3
417 load_npx ();
418 #endif
419 run_child ();
420 #if __DJGPP_MINOR__ < 3
421 save_npx ();
422 #endif
423
424 /* Did we step over an INT xx instruction? */
425 if (stepping_over_INT && a_tss.tss_eip == INT3_addr + 1)
426 {
427 /* Restore the original opcode. */
428 a_tss.tss_eip--; /* EIP points *after* the INT3 instruction */
429 write_child (a_tss.tss_eip, &saved_opcode, 1);
430 /* Simulate a TRAP exception. */
431 a_tss.tss_irqn = 1;
432 a_tss.tss_eflags |= 0x0100;
433 }
434
435 getcwd (child_cwd, sizeof (child_cwd)); /* in case it has changed */
436 chdir (current_directory);
437
438 if (a_tss.tss_irqn == 0x21)
439 {
440 status->kind = TARGET_WAITKIND_EXITED;
441 status->value.integer = a_tss.tss_eax & 0xff;
442 }
443 else
444 {
445 status->value.sig = TARGET_SIGNAL_UNKNOWN;
446 status->kind = TARGET_WAITKIND_STOPPED;
447 for (i = 0; sig_map[i].go32_sig != -1; i++)
448 {
449 if (a_tss.tss_irqn == sig_map[i].go32_sig)
450 {
451 #if __DJGPP_MINOR__ < 3
452 if ((status->value.sig = sig_map[i].gdb_sig) !=
453 TARGET_SIGNAL_TRAP)
454 status->kind = TARGET_WAITKIND_SIGNALLED;
455 #else
456 status->value.sig = sig_map[i].gdb_sig;
457 #endif
458 break;
459 }
460 }
461 }
462 return pid_to_ptid (SOME_PID);
463 }
464
465 static void
466 fetch_register (int regno)
467 {
468 if (regno < FP0_REGNUM)
469 regcache_raw_supply (current_regcache, regno,
470 (char *) &a_tss + regno_mapping[regno].tss_ofs);
471 else if (i386_fp_regnum_p (regno) || i386_fpc_regnum_p (regno))
472 i387_supply_fsave (current_regcache, regno, &npx);
473 else
474 internal_error (__FILE__, __LINE__,
475 _("Invalid register no. %d in fetch_register."), regno);
476 }
477
478 static void
479 go32_fetch_registers (int regno)
480 {
481 if (regno >= 0)
482 fetch_register (regno);
483 else
484 {
485 for (regno = 0; regno < FP0_REGNUM; regno++)
486 fetch_register (regno);
487 i387_supply_fsave (current_regcache, -1, &npx);
488 }
489 }
490
491 static void
492 store_register (int regno)
493 {
494 if (regno < FP0_REGNUM)
495 regcache_raw_collect (current_regcache, regno,
496 (char *) &a_tss + regno_mapping[regno].tss_ofs);
497 else if (i386_fp_regnum_p (regno) || i386_fpc_regnum_p (regno))
498 i387_fill_fsave ((char *) &npx, regno);
499 else
500 internal_error (__FILE__, __LINE__,
501 _("Invalid register no. %d in store_register."), regno);
502 }
503
504 static void
505 go32_store_registers (int regno)
506 {
507 unsigned r;
508
509 if (regno >= 0)
510 store_register (regno);
511 else
512 {
513 for (r = 0; r < FP0_REGNUM; r++)
514 store_register (r);
515 i387_fill_fsave ((char *) &npx, -1);
516 }
517 }
518
519 static void
520 go32_prepare_to_store (void)
521 {
522 }
523
524 static int
525 go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
526 struct mem_attrib *attrib, struct target_ops *target)
527 {
528 if (write)
529 {
530 if (write_child (memaddr, myaddr, len))
531 {
532 return 0;
533 }
534 else
535 {
536 return len;
537 }
538 }
539 else
540 {
541 if (read_child (memaddr, myaddr, len))
542 {
543 return 0;
544 }
545 else
546 {
547 return len;
548 }
549 }
550 }
551
552 static cmdline_t child_cmd; /* parsed child's command line kept here */
553
554 static void
555 go32_files_info (struct target_ops *target)
556 {
557 printf_unfiltered ("You are running a DJGPP V2 program.\n");
558 }
559
560 static void
561 go32_stop (void)
562 {
563 normal_stop ();
564 cleanup_client ();
565 inferior_ptid = null_ptid;
566 prog_has_started = 0;
567 }
568
569 static void
570 go32_kill_inferior (void)
571 {
572 redir_cmdline_delete (&child_cmd);
573 resume_signal = -1;
574 resume_is_step = 0;
575 unpush_target (&go32_ops);
576 }
577
578 static void
579 go32_create_inferior (char *exec_file, char *args, char **env, int from_tty)
580 {
581 extern char **environ;
582 jmp_buf start_state;
583 char *cmdline;
584 char **env_save = environ;
585 size_t cmdlen;
586
587 /* If no exec file handed to us, get it from the exec-file command -- with
588 a good, common error message if none is specified. */
589 if (exec_file == 0)
590 exec_file = get_exec_file (1);
591
592 if (prog_has_started)
593 {
594 go32_stop ();
595 go32_kill_inferior ();
596 }
597 resume_signal = -1;
598 resume_is_step = 0;
599
600 /* Initialize child's cwd as empty to be initialized when starting
601 the child. */
602 *child_cwd = 0;
603
604 /* Init command line storage. */
605 if (redir_debug_init (&child_cmd) == -1)
606 internal_error (__FILE__, __LINE__,
607 _("Cannot allocate redirection storage: not enough memory.\n"));
608
609 /* Parse the command line and create redirections. */
610 if (strpbrk (args, "<>"))
611 {
612 if (redir_cmdline_parse (args, &child_cmd) == 0)
613 args = child_cmd.command;
614 else
615 error (_("Syntax error in command line."));
616 }
617 else
618 child_cmd.command = xstrdup (args);
619
620 cmdlen = strlen (args);
621 /* v2loadimage passes command lines via DOS memory, so it cannot
622 possibly handle commands longer than 1MB. */
623 if (cmdlen > 1024*1024)
624 error (_("Command line too long."));
625
626 cmdline = xmalloc (cmdlen + 4);
627 strcpy (cmdline + 1, args);
628 /* If the command-line length fits into DOS 126-char limits, use the
629 DOS command tail format; otherwise, tell v2loadimage to pass it
630 through a buffer in conventional memory. */
631 if (cmdlen < 127)
632 {
633 cmdline[0] = strlen (args);
634 cmdline[cmdlen + 1] = 13;
635 }
636 else
637 cmdline[0] = 0xff; /* signal v2loadimage it's a long command */
638
639 environ = env;
640
641 if (v2loadimage (exec_file, cmdline, start_state))
642 {
643 environ = env_save;
644 printf_unfiltered ("Load failed for image %s\n", exec_file);
645 exit (1);
646 }
647 environ = env_save;
648 xfree (cmdline);
649
650 edi_init (start_state);
651 #if __DJGPP_MINOR__ < 3
652 save_npx ();
653 #endif
654
655 inferior_ptid = pid_to_ptid (SOME_PID);
656 push_target (&go32_ops);
657 clear_proceed_status ();
658 insert_breakpoints ();
659 proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
660 prog_has_started = 1;
661 }
662
663 static void
664 go32_mourn_inferior (void)
665 {
666 /* We need to make sure all the breakpoint enable bits in the DR7
667 register are reset when the inferior exits. Otherwise, if they
668 rerun the inferior, the uncleared bits may cause random SIGTRAPs,
669 failure to set more watchpoints, and other calamities. It would
670 be nice if GDB itself would take care to remove all breakpoints
671 at all times, but it doesn't, probably under an assumption that
672 the OS cleans up when the debuggee exits. */
673 i386_cleanup_dregs ();
674 go32_kill_inferior ();
675 generic_mourn_inferior ();
676 }
677
678 static int
679 go32_can_run (void)
680 {
681 return 1;
682 }
683
684 /* Hardware watchpoint support. */
685
686 #define D_REGS edi.dr
687 #define CONTROL D_REGS[7]
688 #define STATUS D_REGS[6]
689
690 /* Pass the address ADDR to the inferior in the I'th debug register.
691 Here we just store the address in D_REGS, the watchpoint will be
692 actually set up when go32_wait runs the debuggee. */
693 void
694 go32_set_dr (int i, CORE_ADDR addr)
695 {
696 if (i < 0 || i > 3)
697 internal_error (__FILE__, __LINE__,
698 _("Invalid register %d in go32_set_dr.\n"), i);
699 D_REGS[i] = addr;
700 }
701
702 /* Pass the value VAL to the inferior in the DR7 debug control
703 register. Here we just store the address in D_REGS, the watchpoint
704 will be actually set up when go32_wait runs the debuggee. */
705 void
706 go32_set_dr7 (unsigned val)
707 {
708 CONTROL = val;
709 }
710
711 /* Get the value of the DR6 debug status register from the inferior.
712 Here we just return the value stored in D_REGS, as we've got it
713 from the last go32_wait call. */
714 unsigned
715 go32_get_dr6 (void)
716 {
717 return STATUS;
718 }
719
720 /* Put the device open on handle FD into either raw or cooked
721 mode, return 1 if it was in raw mode, zero otherwise. */
722
723 static int
724 device_mode (int fd, int raw_p)
725 {
726 int oldmode, newmode;
727 __dpmi_regs regs;
728
729 regs.x.ax = 0x4400;
730 regs.x.bx = fd;
731 __dpmi_int (0x21, &regs);
732 if (regs.x.flags & 1)
733 return -1;
734 newmode = oldmode = regs.x.dx;
735
736 if (raw_p)
737 newmode |= 0x20;
738 else
739 newmode &= ~0x20;
740
741 if (oldmode & 0x80) /* Only for character dev */
742 {
743 regs.x.ax = 0x4401;
744 regs.x.bx = fd;
745 regs.x.dx = newmode & 0xff; /* Force upper byte zero, else it fails */
746 __dpmi_int (0x21, &regs);
747 if (regs.x.flags & 1)
748 return -1;
749 }
750 return (oldmode & 0x20) == 0x20;
751 }
752
753
754 static int inf_mode_valid = 0;
755 static int inf_terminal_mode;
756
757 /* This semaphore is needed because, amazingly enough, GDB calls
758 target.to_terminal_ours more than once after the inferior stops.
759 But we need the information from the first call only, since the
760 second call will always see GDB's own cooked terminal. */
761 static int terminal_is_ours = 1;
762
763 static void
764 go32_terminal_init (void)
765 {
766 inf_mode_valid = 0; /* reinitialize, in case they are restarting child */
767 terminal_is_ours = 1;
768 }
769
770 static void
771 go32_terminal_info (char *args, int from_tty)
772 {
773 printf_unfiltered ("Inferior's terminal is in %s mode.\n",
774 !inf_mode_valid
775 ? "default" : inf_terminal_mode ? "raw" : "cooked");
776
777 #if __DJGPP_MINOR__ > 2
778 if (child_cmd.redirection)
779 {
780 int i;
781
782 for (i = 0; i < DBG_HANDLES; i++)
783 {
784 if (child_cmd.redirection[i]->file_name)
785 printf_unfiltered ("\tFile handle %d is redirected to `%s'.\n",
786 i, child_cmd.redirection[i]->file_name);
787 else if (_get_dev_info (child_cmd.redirection[i]->inf_handle) == -1)
788 printf_unfiltered
789 ("\tFile handle %d appears to be closed by inferior.\n", i);
790 /* Mask off the raw/cooked bit when comparing device info words. */
791 else if ((_get_dev_info (child_cmd.redirection[i]->inf_handle) & 0xdf)
792 != (_get_dev_info (i) & 0xdf))
793 printf_unfiltered
794 ("\tFile handle %d appears to be redirected by inferior.\n", i);
795 }
796 }
797 #endif
798 }
799
800 static void
801 go32_terminal_inferior (void)
802 {
803 /* Redirect standard handles as child wants them. */
804 errno = 0;
805 if (redir_to_child (&child_cmd) == -1)
806 {
807 redir_to_debugger (&child_cmd);
808 error (_("Cannot redirect standard handles for program: %s."),
809 safe_strerror (errno));
810 }
811 /* set the console device of the inferior to whatever mode
812 (raw or cooked) we found it last time */
813 if (terminal_is_ours)
814 {
815 if (inf_mode_valid)
816 device_mode (0, inf_terminal_mode);
817 terminal_is_ours = 0;
818 }
819 }
820
821 static void
822 go32_terminal_ours (void)
823 {
824 /* Switch to cooked mode on the gdb terminal and save the inferior
825 terminal mode to be restored when it is resumed */
826 if (!terminal_is_ours)
827 {
828 inf_terminal_mode = device_mode (0, 0);
829 if (inf_terminal_mode != -1)
830 inf_mode_valid = 1;
831 else
832 /* If device_mode returned -1, we don't know what happens with
833 handle 0 anymore, so make the info invalid. */
834 inf_mode_valid = 0;
835 terminal_is_ours = 1;
836
837 /* Restore debugger's standard handles. */
838 errno = 0;
839 if (redir_to_debugger (&child_cmd) == -1)
840 {
841 redir_to_child (&child_cmd);
842 error (_("Cannot redirect standard handles for debugger: %s."),
843 safe_strerror (errno));
844 }
845 }
846 }
847
848 static void
849 init_go32_ops (void)
850 {
851 go32_ops.to_shortname = "djgpp";
852 go32_ops.to_longname = "djgpp target process";
853 go32_ops.to_doc =
854 "Program loaded by djgpp, when gdb is used as an external debugger";
855 go32_ops.to_open = go32_open;
856 go32_ops.to_close = go32_close;
857 go32_ops.to_attach = go32_attach;
858 go32_ops.to_detach = go32_detach;
859 go32_ops.to_resume = go32_resume;
860 go32_ops.to_wait = go32_wait;
861 go32_ops.to_fetch_registers = go32_fetch_registers;
862 go32_ops.to_store_registers = go32_store_registers;
863 go32_ops.to_prepare_to_store = go32_prepare_to_store;
864 go32_ops.deprecated_xfer_memory = go32_xfer_memory;
865 go32_ops.to_files_info = go32_files_info;
866 go32_ops.to_insert_breakpoint = memory_insert_breakpoint;
867 go32_ops.to_remove_breakpoint = memory_remove_breakpoint;
868 go32_ops.to_terminal_init = go32_terminal_init;
869 go32_ops.to_terminal_inferior = go32_terminal_inferior;
870 go32_ops.to_terminal_ours_for_output = go32_terminal_ours;
871 go32_ops.to_terminal_ours = go32_terminal_ours;
872 go32_ops.to_terminal_info = go32_terminal_info;
873 go32_ops.to_kill = go32_kill_inferior;
874 go32_ops.to_create_inferior = go32_create_inferior;
875 go32_ops.to_mourn_inferior = go32_mourn_inferior;
876 go32_ops.to_can_run = go32_can_run;
877 go32_ops.to_stop = go32_stop;
878 go32_ops.to_stratum = process_stratum;
879 go32_ops.to_has_all_memory = 1;
880 go32_ops.to_has_memory = 1;
881 go32_ops.to_has_stack = 1;
882 go32_ops.to_has_registers = 1;
883 go32_ops.to_has_execution = 1;
884 go32_ops.to_magic = OPS_MAGIC;
885
886 /* Initialize child's cwd as empty to be initialized when starting
887 the child. */
888 *child_cwd = 0;
889
890 /* Initialize child's command line storage. */
891 if (redir_debug_init (&child_cmd) == -1)
892 internal_error (__FILE__, __LINE__,
893 _("Cannot allocate redirection storage: not enough memory.\n"));
894
895 /* We are always processing GCC-compiled programs. */
896 processing_gcc_compilation = 2;
897 }
898
899 unsigned short windows_major, windows_minor;
900
901 /* Compute the version Windows reports via Int 2Fh/AX=1600h. */
902 static void
903 go32_get_windows_version(void)
904 {
905 __dpmi_regs r;
906
907 r.x.ax = 0x1600;
908 __dpmi_int(0x2f, &r);
909 if (r.h.al > 2 && r.h.al != 0x80 && r.h.al != 0xff
910 && (r.h.al > 3 || r.h.ah > 0))
911 {
912 windows_major = r.h.al;
913 windows_minor = r.h.ah;
914 }
915 else
916 windows_major = 0xff; /* meaning no Windows */
917 }
918
919 /* A subroutine of go32_sysinfo to display memory info. */
920 static void
921 print_mem (unsigned long datum, const char *header, int in_pages_p)
922 {
923 if (datum != 0xffffffffUL)
924 {
925 if (in_pages_p)
926 datum <<= 12;
927 puts_filtered (header);
928 if (datum > 1024)
929 {
930 printf_filtered ("%lu KB", datum >> 10);
931 if (datum > 1024 * 1024)
932 printf_filtered (" (%lu MB)", datum >> 20);
933 }
934 else
935 printf_filtered ("%lu Bytes", datum);
936 puts_filtered ("\n");
937 }
938 }
939
940 /* Display assorted information about the underlying OS. */
941 static void
942 go32_sysinfo (char *arg, int from_tty)
943 {
944 struct utsname u;
945 char cpuid_vendor[13];
946 unsigned cpuid_max = 0, cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx;
947 unsigned true_dos_version = _get_dos_version (1);
948 unsigned advertized_dos_version = ((unsigned int)_osmajor << 8) | _osminor;
949 int dpmi_flags;
950 char dpmi_vendor_info[129];
951 int dpmi_vendor_available =
952 __dpmi_get_capabilities (&dpmi_flags, dpmi_vendor_info);
953 __dpmi_version_ret dpmi_version_data;
954 long eflags;
955 __dpmi_free_mem_info mem_info;
956 __dpmi_regs regs;
957
958 cpuid_vendor[0] = '\0';
959 if (uname (&u))
960 strcpy (u.machine, "Unknown x86");
961 else if (u.machine[0] == 'i' && u.machine[1] > 4)
962 {
963 /* CPUID with EAX = 0 returns the Vendor ID. */
964 __asm__ __volatile__ ("xorl %%ebx, %%ebx;"
965 "xorl %%ecx, %%ecx;"
966 "xorl %%edx, %%edx;"
967 "movl $0, %%eax;"
968 "cpuid;"
969 "movl %%ebx, %0;"
970 "movl %%edx, %1;"
971 "movl %%ecx, %2;"
972 "movl %%eax, %3;"
973 : "=m" (cpuid_vendor[0]),
974 "=m" (cpuid_vendor[4]),
975 "=m" (cpuid_vendor[8]),
976 "=m" (cpuid_max)
977 :
978 : "%eax", "%ebx", "%ecx", "%edx");
979 cpuid_vendor[12] = '\0';
980 }
981
982 printf_filtered ("CPU Type.......................%s", u.machine);
983 if (cpuid_vendor[0])
984 printf_filtered (" (%s)", cpuid_vendor);
985 puts_filtered ("\n");
986
987 /* CPUID with EAX = 1 returns processor signature and features. */
988 if (cpuid_max >= 1)
989 {
990 static char *brand_name[] = {
991 "",
992 " Celeron",
993 " III",
994 " III Xeon",
995 "", "", "", "",
996 " 4"
997 };
998 char cpu_string[80];
999 char cpu_brand[20];
1000 unsigned brand_idx;
1001 int intel_p = strcmp (cpuid_vendor, "GenuineIntel") == 0;
1002 int amd_p = strcmp (cpuid_vendor, "AuthenticAMD") == 0;
1003 unsigned cpu_family, cpu_model;
1004
1005 __asm__ __volatile__ ("movl $1, %%eax;"
1006 "cpuid;"
1007 : "=a" (cpuid_eax),
1008 "=b" (cpuid_ebx),
1009 "=d" (cpuid_edx)
1010 :
1011 : "%ecx");
1012 brand_idx = cpuid_ebx & 0xff;
1013 cpu_family = (cpuid_eax >> 8) & 0xf;
1014 cpu_model = (cpuid_eax >> 4) & 0xf;
1015 cpu_brand[0] = '\0';
1016 if (intel_p)
1017 {
1018 if (brand_idx > 0
1019 && brand_idx < sizeof(brand_name)/sizeof(brand_name[0])
1020 && *brand_name[brand_idx])
1021 strcpy (cpu_brand, brand_name[brand_idx]);
1022 else if (cpu_family == 5)
1023 {
1024 if (((cpuid_eax >> 12) & 3) == 0 && cpu_model == 4)
1025 strcpy (cpu_brand, " MMX");
1026 else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 1)
1027 strcpy (cpu_brand, " OverDrive");
1028 else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 2)
1029 strcpy (cpu_brand, " Dual");
1030 }
1031 else if (cpu_family == 6 && cpu_model < 8)
1032 {
1033 switch (cpu_model)
1034 {
1035 case 1:
1036 strcpy (cpu_brand, " Pro");
1037 break;
1038 case 3:
1039 strcpy (cpu_brand, " II");
1040 break;
1041 case 5:
1042 strcpy (cpu_brand, " II Xeon");
1043 break;
1044 case 6:
1045 strcpy (cpu_brand, " Celeron");
1046 break;
1047 case 7:
1048 strcpy (cpu_brand, " III");
1049 break;
1050 }
1051 }
1052 }
1053 else if (amd_p)
1054 {
1055 switch (cpu_family)
1056 {
1057 case 4:
1058 strcpy (cpu_brand, "486/5x86");
1059 break;
1060 case 5:
1061 switch (cpu_model)
1062 {
1063 case 0:
1064 case 1:
1065 case 2:
1066 case 3:
1067 strcpy (cpu_brand, "-K5");
1068 break;
1069 case 6:
1070 case 7:
1071 strcpy (cpu_brand, "-K6");
1072 break;
1073 case 8:
1074 strcpy (cpu_brand, "-K6-2");
1075 break;
1076 case 9:
1077 strcpy (cpu_brand, "-K6-III");
1078 break;
1079 }
1080 break;
1081 case 6:
1082 switch (cpu_model)
1083 {
1084 case 1:
1085 case 2:
1086 case 4:
1087 strcpy (cpu_brand, " Athlon");
1088 break;
1089 case 3:
1090 strcpy (cpu_brand, " Duron");
1091 break;
1092 }
1093 break;
1094 }
1095 }
1096 sprintf (cpu_string, "%s%s Model %d Stepping %d",
1097 intel_p ? "Pentium" : (amd_p ? "AMD" : "ix86"),
1098 cpu_brand, cpu_model, cpuid_eax & 0xf);
1099 printfi_filtered (31, "%s\n", cpu_string);
1100 if (((cpuid_edx & (6 | (0x0d << 23))) != 0)
1101 || ((cpuid_edx & 1) == 0)
1102 || (amd_p && (cpuid_edx & (3 << 30)) != 0))
1103 {
1104 puts_filtered ("CPU Features...................");
1105 /* We only list features which might be useful in the DPMI
1106 environment. */
1107 if ((cpuid_edx & 1) == 0)
1108 puts_filtered ("No FPU "); /* it's unusual to not have an FPU */
1109 if ((cpuid_edx & (1 << 1)) != 0)
1110 puts_filtered ("VME ");
1111 if ((cpuid_edx & (1 << 2)) != 0)
1112 puts_filtered ("DE ");
1113 if ((cpuid_edx & (1 << 4)) != 0)
1114 puts_filtered ("TSC ");
1115 if ((cpuid_edx & (1 << 23)) != 0)
1116 puts_filtered ("MMX ");
1117 if ((cpuid_edx & (1 << 25)) != 0)
1118 puts_filtered ("SSE ");
1119 if ((cpuid_edx & (1 << 26)) != 0)
1120 puts_filtered ("SSE2 ");
1121 if (amd_p)
1122 {
1123 if ((cpuid_edx & (1 << 31)) != 0)
1124 puts_filtered ("3DNow! ");
1125 if ((cpuid_edx & (1 << 30)) != 0)
1126 puts_filtered ("3DNow!Ext");
1127 }
1128 puts_filtered ("\n");
1129 }
1130 }
1131 puts_filtered ("\n");
1132 printf_filtered ("DOS Version....................%s %s.%s",
1133 _os_flavor, u.release, u.version);
1134 if (true_dos_version != advertized_dos_version)
1135 printf_filtered (" (disguised as v%d.%d)", _osmajor, _osminor);
1136 puts_filtered ("\n");
1137 if (!windows_major)
1138 go32_get_windows_version ();
1139 if (windows_major != 0xff)
1140 {
1141 const char *windows_flavor;
1142
1143 printf_filtered ("Windows Version................%d.%02d (Windows ",
1144 windows_major, windows_minor);
1145 switch (windows_major)
1146 {
1147 case 3:
1148 windows_flavor = "3.X";
1149 break;
1150 case 4:
1151 switch (windows_minor)
1152 {
1153 case 0:
1154 windows_flavor = "95, 95A, or 95B";
1155 break;
1156 case 3:
1157 windows_flavor = "95B OSR2.1 or 95C OSR2.5";
1158 break;
1159 case 10:
1160 windows_flavor = "98 or 98 SE";
1161 break;
1162 case 90:
1163 windows_flavor = "ME";
1164 break;
1165 default:
1166 windows_flavor = "9X";
1167 break;
1168 }
1169 break;
1170 default:
1171 windows_flavor = "??";
1172 break;
1173 }
1174 printf_filtered ("%s)\n", windows_flavor);
1175 }
1176 else if (true_dos_version == 0x532 && advertized_dos_version == 0x500)
1177 printf_filtered ("Windows Version................Windows NT or Windows 2000\n");
1178 puts_filtered ("\n");
1179 if (dpmi_vendor_available == 0)
1180 {
1181 /* The DPMI spec says the vendor string should be ASCIIZ, but
1182 I don't trust the vendors to follow that... */
1183 if (!memchr (&dpmi_vendor_info[2], 0, 126))
1184 dpmi_vendor_info[128] = '\0';
1185 printf_filtered ("DPMI Host......................%s v%d.%d (capabilities: %#x)\n",
1186 &dpmi_vendor_info[2],
1187 (unsigned)dpmi_vendor_info[0],
1188 (unsigned)dpmi_vendor_info[1],
1189 ((unsigned)dpmi_flags & 0x7f));
1190 }
1191 __dpmi_get_version (&dpmi_version_data);
1192 printf_filtered ("DPMI Version...................%d.%02d\n",
1193 dpmi_version_data.major, dpmi_version_data.minor);
1194 printf_filtered ("DPMI Info......................%s-bit DPMI, with%s Virtual Memory support\n",
1195 (dpmi_version_data.flags & 1) ? "32" : "16",
1196 (dpmi_version_data.flags & 4) ? "" : "out");
1197 printfi_filtered (31, "Interrupts reflected to %s mode\n",
1198 (dpmi_version_data.flags & 2) ? "V86" : "Real");
1199 printfi_filtered (31, "Processor type: i%d86\n",
1200 dpmi_version_data.cpu);
1201 printfi_filtered (31, "PIC base interrupt: Master: %#x Slave: %#x\n",
1202 dpmi_version_data.master_pic, dpmi_version_data.slave_pic);
1203
1204 /* a_tss is only initialized when the debuggee is first run. */
1205 if (prog_has_started)
1206 {
1207 __asm__ __volatile__ ("pushfl ; popl %0" : "=g" (eflags));
1208 printf_filtered ("Protection.....................Ring %d (in %s), with%s I/O protection\n",
1209 a_tss.tss_cs & 3, (a_tss.tss_cs & 4) ? "LDT" : "GDT",
1210 (a_tss.tss_cs & 3) > ((eflags >> 12) & 3) ? "" : "out");
1211 }
1212 puts_filtered ("\n");
1213 __dpmi_get_free_memory_information (&mem_info);
1214 print_mem (mem_info.total_number_of_physical_pages,
1215 "DPMI Total Physical Memory.....", 1);
1216 print_mem (mem_info.total_number_of_free_pages,
1217 "DPMI Free Physical Memory......", 1);
1218 print_mem (mem_info.size_of_paging_file_partition_in_pages,
1219 "DPMI Swap Space................", 1);
1220 print_mem (mem_info.linear_address_space_size_in_pages,
1221 "DPMI Total Linear Address Size.", 1);
1222 print_mem (mem_info.free_linear_address_space_in_pages,
1223 "DPMI Free Linear Address Size..", 1);
1224 print_mem (mem_info.largest_available_free_block_in_bytes,
1225 "DPMI Largest Free Memory Block.", 0);
1226
1227 regs.h.ah = 0x48;
1228 regs.x.bx = 0xffff;
1229 __dpmi_int (0x21, &regs);
1230 print_mem (regs.x.bx << 4, "Free DOS Memory................", 0);
1231 regs.x.ax = 0x5800;
1232 __dpmi_int (0x21, &regs);
1233 if ((regs.x.flags & 1) == 0)
1234 {
1235 static const char *dos_hilo[] = {
1236 "Low", "", "", "", "High", "", "", "", "High, then Low"
1237 };
1238 static const char *dos_fit[] = {
1239 "First", "Best", "Last"
1240 };
1241 int hilo_idx = (regs.x.ax >> 4) & 0x0f;
1242 int fit_idx = regs.x.ax & 0x0f;
1243
1244 if (hilo_idx > 8)
1245 hilo_idx = 0;
1246 if (fit_idx > 2)
1247 fit_idx = 0;
1248 printf_filtered ("DOS Memory Allocation..........%s memory, %s fit\n",
1249 dos_hilo[hilo_idx], dos_fit[fit_idx]);
1250 regs.x.ax = 0x5802;
1251 __dpmi_int (0x21, &regs);
1252 if ((regs.x.flags & 1) != 0)
1253 regs.h.al = 0;
1254 printfi_filtered (31, "UMBs %sin DOS memory chain\n",
1255 regs.h.al == 0 ? "not " : "");
1256 }
1257 }
1258
1259 struct seg_descr {
1260 unsigned short limit0 __attribute__((packed));
1261 unsigned short base0 __attribute__((packed));
1262 unsigned char base1 __attribute__((packed));
1263 unsigned stype:5 __attribute__((packed));
1264 unsigned dpl:2 __attribute__((packed));
1265 unsigned present:1 __attribute__((packed));
1266 unsigned limit1:4 __attribute__((packed));
1267 unsigned available:1 __attribute__((packed));
1268 unsigned dummy:1 __attribute__((packed));
1269 unsigned bit32:1 __attribute__((packed));
1270 unsigned page_granular:1 __attribute__((packed));
1271 unsigned char base2 __attribute__((packed));
1272 };
1273
1274 struct gate_descr {
1275 unsigned short offset0 __attribute__((packed));
1276 unsigned short selector __attribute__((packed));
1277 unsigned param_count:5 __attribute__((packed));
1278 unsigned dummy:3 __attribute__((packed));
1279 unsigned stype:5 __attribute__((packed));
1280 unsigned dpl:2 __attribute__((packed));
1281 unsigned present:1 __attribute__((packed));
1282 unsigned short offset1 __attribute__((packed));
1283 };
1284
1285 /* Read LEN bytes starting at logical address ADDR, and put the result
1286 into DEST. Return 1 if success, zero if not. */
1287 static int
1288 read_memory_region (unsigned long addr, void *dest, size_t len)
1289 {
1290 unsigned long dos_ds_limit = __dpmi_get_segment_limit (_dos_ds);
1291 int retval = 1;
1292
1293 /* For the low memory, we can simply use _dos_ds. */
1294 if (addr <= dos_ds_limit - len)
1295 dosmemget (addr, len, dest);
1296 else
1297 {
1298 /* For memory above 1MB we need to set up a special segment to
1299 be able to access that memory. */
1300 int sel = __dpmi_allocate_ldt_descriptors (1);
1301
1302 if (sel <= 0)
1303 retval = 0;
1304 else
1305 {
1306 int access_rights = __dpmi_get_descriptor_access_rights (sel);
1307 size_t segment_limit = len - 1;
1308
1309 /* Make sure the crucial bits in the descriptor access
1310 rights are set correctly. Some DPMI providers might barf
1311 if we set the segment limit to something that is not an
1312 integral multiple of 4KB pages if the granularity bit is
1313 not set to byte-granular, even though the DPMI spec says
1314 it's the host's responsibility to set that bit correctly. */
1315 if (len > 1024 * 1024)
1316 {
1317 access_rights |= 0x8000;
1318 /* Page-granular segments should have the low 12 bits of
1319 the limit set. */
1320 segment_limit |= 0xfff;
1321 }
1322 else
1323 access_rights &= ~0x8000;
1324
1325 if (__dpmi_set_segment_base_address (sel, addr) != -1
1326 && __dpmi_set_descriptor_access_rights (sel, access_rights) != -1
1327 && __dpmi_set_segment_limit (sel, segment_limit) != -1
1328 /* W2K silently fails to set the segment limit, leaving
1329 it at zero; this test avoids the resulting crash. */
1330 && __dpmi_get_segment_limit (sel) >= segment_limit)
1331 movedata (sel, 0, _my_ds (), (unsigned)dest, len);
1332 else
1333 retval = 0;
1334
1335 __dpmi_free_ldt_descriptor (sel);
1336 }
1337 }
1338 return retval;
1339 }
1340
1341 /* Get a segment descriptor stored at index IDX in the descriptor
1342 table whose base address is TABLE_BASE. Return the descriptor
1343 type, or -1 if failure. */
1344 static int
1345 get_descriptor (unsigned long table_base, int idx, void *descr)
1346 {
1347 unsigned long addr = table_base + idx * 8; /* 8 bytes per entry */
1348
1349 if (read_memory_region (addr, descr, 8))
1350 return (int)((struct seg_descr *)descr)->stype;
1351 return -1;
1352 }
1353
1354 struct dtr_reg {
1355 unsigned short limit __attribute__((packed));
1356 unsigned long base __attribute__((packed));
1357 };
1358
1359 /* Display a segment descriptor stored at index IDX in a descriptor
1360 table whose type is TYPE and whose base address is BASE_ADDR. If
1361 FORCE is non-zero, display even invalid descriptors. */
1362 static void
1363 display_descriptor (unsigned type, unsigned long base_addr, int idx, int force)
1364 {
1365 struct seg_descr descr;
1366 struct gate_descr gate;
1367
1368 /* Get the descriptor from the table. */
1369 if (idx == 0 && type == 0)
1370 puts_filtered ("0x000: null descriptor\n");
1371 else if (get_descriptor (base_addr, idx, &descr) != -1)
1372 {
1373 /* For each type of descriptor table, this has a bit set if the
1374 corresponding type of selectors is valid in that table. */
1375 static unsigned allowed_descriptors[] = {
1376 0xffffdafeL, /* GDT */
1377 0x0000c0e0L, /* IDT */
1378 0xffffdafaL /* LDT */
1379 };
1380
1381 /* If the program hasn't started yet, assume the debuggee will
1382 have the same CPL as the debugger. */
1383 int cpl = prog_has_started ? (a_tss.tss_cs & 3) : _my_cs () & 3;
1384 unsigned long limit = (descr.limit1 << 16) | descr.limit0;
1385
1386 if (descr.present
1387 && (allowed_descriptors[type] & (1 << descr.stype)) != 0)
1388 {
1389 printf_filtered ("0x%03x: ",
1390 type == 1
1391 ? idx : (idx * 8) | (type ? (cpl | 4) : 0));
1392 if (descr.page_granular)
1393 limit = (limit << 12) | 0xfff; /* big segment: low 12 bit set */
1394 if (descr.stype == 1 || descr.stype == 2 || descr.stype == 3
1395 || descr.stype == 9 || descr.stype == 11
1396 || (descr.stype >= 16 && descr.stype < 32))
1397 printf_filtered ("base=0x%02x%02x%04x limit=0x%08lx",
1398 descr.base2, descr.base1, descr.base0, limit);
1399
1400 switch (descr.stype)
1401 {
1402 case 1:
1403 case 3:
1404 printf_filtered (" 16-bit TSS (task %sactive)",
1405 descr.stype == 3 ? "" : "in");
1406 break;
1407 case 2:
1408 puts_filtered (" LDT");
1409 break;
1410 case 4:
1411 memcpy (&gate, &descr, sizeof gate);
1412 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1413 gate.selector, gate.offset1, gate.offset0);
1414 printf_filtered (" 16-bit Call Gate (params=%d)",
1415 gate.param_count);
1416 break;
1417 case 5:
1418 printf_filtered ("TSS selector=0x%04x", descr.base0);
1419 printfi_filtered (16, "Task Gate");
1420 break;
1421 case 6:
1422 case 7:
1423 memcpy (&gate, &descr, sizeof gate);
1424 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1425 gate.selector, gate.offset1, gate.offset0);
1426 printf_filtered (" 16-bit %s Gate",
1427 descr.stype == 6 ? "Interrupt" : "Trap");
1428 break;
1429 case 9:
1430 case 11:
1431 printf_filtered (" 32-bit TSS (task %sactive)",
1432 descr.stype == 3 ? "" : "in");
1433 break;
1434 case 12:
1435 memcpy (&gate, &descr, sizeof gate);
1436 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1437 gate.selector, gate.offset1, gate.offset0);
1438 printf_filtered (" 32-bit Call Gate (params=%d)",
1439 gate.param_count);
1440 break;
1441 case 14:
1442 case 15:
1443 memcpy (&gate, &descr, sizeof gate);
1444 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1445 gate.selector, gate.offset1, gate.offset0);
1446 printf_filtered (" 32-bit %s Gate",
1447 descr.stype == 14 ? "Interrupt" : "Trap");
1448 break;
1449 case 16: /* data segments */
1450 case 17:
1451 case 18:
1452 case 19:
1453 case 20:
1454 case 21:
1455 case 22:
1456 case 23:
1457 printf_filtered (" %s-bit Data (%s Exp-%s%s)",
1458 descr.bit32 ? "32" : "16",
1459 descr.stype & 2 ? "Read/Write," : "Read-Only, ",
1460 descr.stype & 4 ? "down" : "up",
1461 descr.stype & 1 ? "" : ", N.Acc");
1462 break;
1463 case 24: /* code segments */
1464 case 25:
1465 case 26:
1466 case 27:
1467 case 28:
1468 case 29:
1469 case 30:
1470 case 31:
1471 printf_filtered (" %s-bit Code (%s, %sConf%s)",
1472 descr.bit32 ? "32" : "16",
1473 descr.stype & 2 ? "Exec/Read" : "Exec-Only",
1474 descr.stype & 4 ? "" : "N.",
1475 descr.stype & 1 ? "" : ", N.Acc");
1476 break;
1477 default:
1478 printf_filtered ("Unknown type 0x%02x", descr.stype);
1479 break;
1480 }
1481 puts_filtered ("\n");
1482 }
1483 else if (force)
1484 {
1485 printf_filtered ("0x%03x: ",
1486 type == 1
1487 ? idx : (idx * 8) | (type ? (cpl | 4) : 0));
1488 if (!descr.present)
1489 puts_filtered ("Segment not present\n");
1490 else
1491 printf_filtered ("Segment type 0x%02x is invalid in this table\n",
1492 descr.stype);
1493 }
1494 }
1495 else if (force)
1496 printf_filtered ("0x%03x: Cannot read this descriptor\n", idx);
1497 }
1498
1499 static void
1500 go32_sldt (char *arg, int from_tty)
1501 {
1502 struct dtr_reg gdtr;
1503 unsigned short ldtr = 0;
1504 int ldt_idx;
1505 struct seg_descr ldt_descr;
1506 long ldt_entry = -1L;
1507 int cpl = (prog_has_started ? a_tss.tss_cs : _my_cs ()) & 3;
1508
1509 if (arg && *arg)
1510 {
1511 while (*arg && isspace(*arg))
1512 arg++;
1513
1514 if (*arg)
1515 {
1516 ldt_entry = parse_and_eval_long (arg);
1517 if (ldt_entry < 0
1518 || (ldt_entry & 4) == 0
1519 || (ldt_entry & 3) != (cpl & 3))
1520 error (_("Invalid LDT entry 0x%03lx."), (unsigned long)ldt_entry);
1521 }
1522 }
1523
1524 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1525 __asm__ __volatile__ ("sldt %0" : "=m" (ldtr) : /* no inputs */ );
1526 ldt_idx = ldtr / 8;
1527 if (ldt_idx == 0)
1528 puts_filtered ("There is no LDT.\n");
1529 /* LDT's entry in the GDT must have the type LDT, which is 2. */
1530 else if (get_descriptor (gdtr.base, ldt_idx, &ldt_descr) != 2)
1531 printf_filtered ("LDT is present (at %#x), but unreadable by GDB.\n",
1532 ldt_descr.base0
1533 | (ldt_descr.base1 << 16)
1534 | (ldt_descr.base2 << 24));
1535 else
1536 {
1537 unsigned base =
1538 ldt_descr.base0
1539 | (ldt_descr.base1 << 16)
1540 | (ldt_descr.base2 << 24);
1541 unsigned limit = ldt_descr.limit0 | (ldt_descr.limit1 << 16);
1542 int max_entry;
1543
1544 if (ldt_descr.page_granular)
1545 /* Page-granular segments must have the low 12 bits of their
1546 limit set. */
1547 limit = (limit << 12) | 0xfff;
1548 /* LDT cannot have more than 8K 8-byte entries, i.e. more than
1549 64KB. */
1550 if (limit > 0xffff)
1551 limit = 0xffff;
1552
1553 max_entry = (limit + 1) / 8;
1554
1555 if (ldt_entry >= 0)
1556 {
1557 if (ldt_entry > limit)
1558 error (_("Invalid LDT entry %#lx: outside valid limits [0..%#x]"),
1559 (unsigned long)ldt_entry, limit);
1560
1561 display_descriptor (ldt_descr.stype, base, ldt_entry / 8, 1);
1562 }
1563 else
1564 {
1565 int i;
1566
1567 for (i = 0; i < max_entry; i++)
1568 display_descriptor (ldt_descr.stype, base, i, 0);
1569 }
1570 }
1571 }
1572
1573 static void
1574 go32_sgdt (char *arg, int from_tty)
1575 {
1576 struct dtr_reg gdtr;
1577 long gdt_entry = -1L;
1578 int max_entry;
1579
1580 if (arg && *arg)
1581 {
1582 while (*arg && isspace(*arg))
1583 arg++;
1584
1585 if (*arg)
1586 {
1587 gdt_entry = parse_and_eval_long (arg);
1588 if (gdt_entry < 0 || (gdt_entry & 7) != 0)
1589 error (_("Invalid GDT entry 0x%03lx: not an integral multiple of 8."),
1590 (unsigned long)gdt_entry);
1591 }
1592 }
1593
1594 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1595 max_entry = (gdtr.limit + 1) / 8;
1596
1597 if (gdt_entry >= 0)
1598 {
1599 if (gdt_entry > gdtr.limit)
1600 error (_("Invalid GDT entry %#lx: outside valid limits [0..%#x]"),
1601 (unsigned long)gdt_entry, gdtr.limit);
1602
1603 display_descriptor (0, gdtr.base, gdt_entry / 8, 1);
1604 }
1605 else
1606 {
1607 int i;
1608
1609 for (i = 0; i < max_entry; i++)
1610 display_descriptor (0, gdtr.base, i, 0);
1611 }
1612 }
1613
1614 static void
1615 go32_sidt (char *arg, int from_tty)
1616 {
1617 struct dtr_reg idtr;
1618 long idt_entry = -1L;
1619 int max_entry;
1620
1621 if (arg && *arg)
1622 {
1623 while (*arg && isspace(*arg))
1624 arg++;
1625
1626 if (*arg)
1627 {
1628 idt_entry = parse_and_eval_long (arg);
1629 if (idt_entry < 0)
1630 error (_("Invalid (negative) IDT entry %ld."), idt_entry);
1631 }
1632 }
1633
1634 __asm__ __volatile__ ("sidt %0" : "=m" (idtr) : /* no inputs */ );
1635 max_entry = (idtr.limit + 1) / 8;
1636 if (max_entry > 0x100) /* no more than 256 entries */
1637 max_entry = 0x100;
1638
1639 if (idt_entry >= 0)
1640 {
1641 if (idt_entry > idtr.limit)
1642 error (_("Invalid IDT entry %#lx: outside valid limits [0..%#x]"),
1643 (unsigned long)idt_entry, idtr.limit);
1644
1645 display_descriptor (1, idtr.base, idt_entry, 1);
1646 }
1647 else
1648 {
1649 int i;
1650
1651 for (i = 0; i < max_entry; i++)
1652 display_descriptor (1, idtr.base, i, 0);
1653 }
1654 }
1655
1656 /* Cached linear address of the base of the page directory. For
1657 now, available only under CWSDPMI. Code based on ideas and
1658 suggestions from Charles Sandmann <sandmann@clio.rice.edu>. */
1659 static unsigned long pdbr;
1660
1661 static unsigned long
1662 get_cr3 (void)
1663 {
1664 unsigned offset;
1665 unsigned taskreg;
1666 unsigned long taskbase, cr3;
1667 struct dtr_reg gdtr;
1668
1669 if (pdbr > 0 && pdbr <= 0xfffff)
1670 return pdbr;
1671
1672 /* Get the linear address of GDT and the Task Register. */
1673 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1674 __asm__ __volatile__ ("str %0" : "=m" (taskreg) : /* no inputs */ );
1675
1676 /* Task Register is a segment selector for the TSS of the current
1677 task. Therefore, it can be used as an index into the GDT to get
1678 at the segment descriptor for the TSS. To get the index, reset
1679 the low 3 bits of the selector (which give the CPL). Add 2 to the
1680 offset to point to the 3 low bytes of the base address. */
1681 offset = gdtr.base + (taskreg & 0xfff8) + 2;
1682
1683
1684 /* CWSDPMI's task base is always under the 1MB mark. */
1685 if (offset > 0xfffff)
1686 return 0;
1687
1688 _farsetsel (_dos_ds);
1689 taskbase = _farnspeekl (offset) & 0xffffffU;
1690 taskbase += _farnspeekl (offset + 2) & 0xff000000U;
1691 if (taskbase > 0xfffff)
1692 return 0;
1693
1694 /* CR3 (a.k.a. PDBR, the Page Directory Base Register) is stored at
1695 offset 1Ch in the TSS. */
1696 cr3 = _farnspeekl (taskbase + 0x1c) & ~0xfff;
1697 if (cr3 > 0xfffff)
1698 {
1699 #if 0 /* not fullly supported yet */
1700 /* The Page Directory is in UMBs. In that case, CWSDPMI puts
1701 the first Page Table right below the Page Directory. Thus,
1702 the first Page Table's entry for its own address and the Page
1703 Directory entry for that Page Table will hold the same
1704 physical address. The loop below searches the entire UMB
1705 range of addresses for such an occurence. */
1706 unsigned long addr, pte_idx;
1707
1708 for (addr = 0xb0000, pte_idx = 0xb0;
1709 pte_idx < 0xff;
1710 addr += 0x1000, pte_idx++)
1711 {
1712 if (((_farnspeekl (addr + 4 * pte_idx) & 0xfffff027) ==
1713 (_farnspeekl (addr + 0x1000) & 0xfffff027))
1714 && ((_farnspeekl (addr + 4 * pte_idx + 4) & 0xfffff000) == cr3))
1715 {
1716 cr3 = addr + 0x1000;
1717 break;
1718 }
1719 }
1720 #endif
1721
1722 if (cr3 > 0xfffff)
1723 cr3 = 0;
1724 }
1725
1726 return cr3;
1727 }
1728
1729 /* Return the N'th Page Directory entry. */
1730 static unsigned long
1731 get_pde (int n)
1732 {
1733 unsigned long pde = 0;
1734
1735 if (pdbr && n >= 0 && n < 1024)
1736 {
1737 pde = _farpeekl (_dos_ds, pdbr + 4*n);
1738 }
1739 return pde;
1740 }
1741
1742 /* Return the N'th entry of the Page Table whose Page Directory entry
1743 is PDE. */
1744 static unsigned long
1745 get_pte (unsigned long pde, int n)
1746 {
1747 unsigned long pte = 0;
1748
1749 /* pde & 0x80 tests the 4MB page bit. We don't support 4MB
1750 page tables, for now. */
1751 if ((pde & 1) && !(pde & 0x80) && n >= 0 && n < 1024)
1752 {
1753 pde &= ~0xfff; /* clear non-address bits */
1754 pte = _farpeekl (_dos_ds, pde + 4*n);
1755 }
1756 return pte;
1757 }
1758
1759 /* Display a Page Directory or Page Table entry. IS_DIR, if non-zero,
1760 says this is a Page Directory entry. If FORCE is non-zero, display
1761 the entry even if its Present flag is off. OFF is the offset of the
1762 address from the page's base address. */
1763 static void
1764 display_ptable_entry (unsigned long entry, int is_dir, int force, unsigned off)
1765 {
1766 if ((entry & 1) != 0)
1767 {
1768 printf_filtered ("Base=0x%05lx000", entry >> 12);
1769 if ((entry & 0x100) && !is_dir)
1770 puts_filtered (" Global");
1771 if ((entry & 0x40) && !is_dir)
1772 puts_filtered (" Dirty");
1773 printf_filtered (" %sAcc.", (entry & 0x20) ? "" : "Not-");
1774 printf_filtered (" %sCached", (entry & 0x10) ? "" : "Not-");
1775 printf_filtered (" Write-%s", (entry & 8) ? "Thru" : "Back");
1776 printf_filtered (" %s", (entry & 4) ? "Usr" : "Sup");
1777 printf_filtered (" Read-%s", (entry & 2) ? "Write" : "Only");
1778 if (off)
1779 printf_filtered (" +0x%x", off);
1780 puts_filtered ("\n");
1781 }
1782 else if (force)
1783 printf_filtered ("Page%s not present or not supported; value=0x%lx.\n",
1784 is_dir ? " Table" : "", entry >> 1);
1785 }
1786
1787 static void
1788 go32_pde (char *arg, int from_tty)
1789 {
1790 long pde_idx = -1, i;
1791
1792 if (arg && *arg)
1793 {
1794 while (*arg && isspace(*arg))
1795 arg++;
1796
1797 if (*arg)
1798 {
1799 pde_idx = parse_and_eval_long (arg);
1800 if (pde_idx < 0 || pde_idx >= 1024)
1801 error (_("Entry %ld is outside valid limits [0..1023]."), pde_idx);
1802 }
1803 }
1804
1805 pdbr = get_cr3 ();
1806 if (!pdbr)
1807 puts_filtered ("Access to Page Directories is not supported on this system.\n");
1808 else if (pde_idx >= 0)
1809 display_ptable_entry (get_pde (pde_idx), 1, 1, 0);
1810 else
1811 for (i = 0; i < 1024; i++)
1812 display_ptable_entry (get_pde (i), 1, 0, 0);
1813 }
1814
1815 /* A helper function to display entries in a Page Table pointed to by
1816 the N'th entry in the Page Directory. If FORCE is non-zero, say
1817 something even if the Page Table is not accessible. */
1818 static void
1819 display_page_table (long n, int force)
1820 {
1821 unsigned long pde = get_pde (n);
1822
1823 if ((pde & 1) != 0)
1824 {
1825 int i;
1826
1827 printf_filtered ("Page Table pointed to by Page Directory entry 0x%lx:\n", n);
1828 for (i = 0; i < 1024; i++)
1829 display_ptable_entry (get_pte (pde, i), 0, 0, 0);
1830 puts_filtered ("\n");
1831 }
1832 else if (force)
1833 printf_filtered ("Page Table not present; value=0x%lx.\n", pde >> 1);
1834 }
1835
1836 static void
1837 go32_pte (char *arg, int from_tty)
1838 {
1839 long pde_idx = -1L, i;
1840
1841 if (arg && *arg)
1842 {
1843 while (*arg && isspace(*arg))
1844 arg++;
1845
1846 if (*arg)
1847 {
1848 pde_idx = parse_and_eval_long (arg);
1849 if (pde_idx < 0 || pde_idx >= 1024)
1850 error (_("Entry %ld is outside valid limits [0..1023]."), pde_idx);
1851 }
1852 }
1853
1854 pdbr = get_cr3 ();
1855 if (!pdbr)
1856 puts_filtered ("Access to Page Tables is not supported on this system.\n");
1857 else if (pde_idx >= 0)
1858 display_page_table (pde_idx, 1);
1859 else
1860 for (i = 0; i < 1024; i++)
1861 display_page_table (i, 0);
1862 }
1863
1864 static void
1865 go32_pte_for_address (char *arg, int from_tty)
1866 {
1867 CORE_ADDR addr = 0, i;
1868
1869 if (arg && *arg)
1870 {
1871 while (*arg && isspace(*arg))
1872 arg++;
1873
1874 if (*arg)
1875 addr = parse_and_eval_address (arg);
1876 }
1877 if (!addr)
1878 error_no_arg (_("linear address"));
1879
1880 pdbr = get_cr3 ();
1881 if (!pdbr)
1882 puts_filtered ("Access to Page Tables is not supported on this system.\n");
1883 else
1884 {
1885 int pde_idx = (addr >> 22) & 0x3ff;
1886 int pte_idx = (addr >> 12) & 0x3ff;
1887 unsigned offs = addr & 0xfff;
1888
1889 printf_filtered ("Page Table entry for address 0x%llx:\n",
1890 (unsigned long long)addr);
1891 display_ptable_entry (get_pte (get_pde (pde_idx), pte_idx), 0, 1, offs);
1892 }
1893 }
1894
1895 static struct cmd_list_element *info_dos_cmdlist = NULL;
1896
1897 static void
1898 go32_info_dos_command (char *args, int from_tty)
1899 {
1900 help_list (info_dos_cmdlist, "info dos ", class_info, gdb_stdout);
1901 }
1902
1903 void
1904 _initialize_go32_nat (void)
1905 {
1906 init_go32_ops ();
1907 add_target (&go32_ops);
1908
1909 add_prefix_cmd ("dos", class_info, go32_info_dos_command, _("\
1910 Print information specific to DJGPP (aka MS-DOS) debugging."),
1911 &info_dos_cmdlist, "info dos ", 0, &infolist);
1912
1913 add_cmd ("sysinfo", class_info, go32_sysinfo, _("\
1914 Display information about the target system, including CPU, OS, DPMI, etc."),
1915 &info_dos_cmdlist);
1916 add_cmd ("ldt", class_info, go32_sldt, _("\
1917 Display entries in the LDT (Local Descriptor Table).\n\
1918 Entry number (an expression) as an argument means display only that entry."),
1919 &info_dos_cmdlist);
1920 add_cmd ("gdt", class_info, go32_sgdt, _("\
1921 Display entries in the GDT (Global Descriptor Table).\n\
1922 Entry number (an expression) as an argument means display only that entry."),
1923 &info_dos_cmdlist);
1924 add_cmd ("idt", class_info, go32_sidt, _("\
1925 Display entries in the IDT (Interrupt Descriptor Table).\n\
1926 Entry number (an expression) as an argument means display only that entry."),
1927 &info_dos_cmdlist);
1928 add_cmd ("pde", class_info, go32_pde, _("\
1929 Display entries in the Page Directory.\n\
1930 Entry number (an expression) as an argument means display only that entry."),
1931 &info_dos_cmdlist);
1932 add_cmd ("pte", class_info, go32_pte, _("\
1933 Display entries in Page Tables.\n\
1934 Entry number (an expression) as an argument means display only entries\n\
1935 from the Page Table pointed to by the specified Page Directory entry."),
1936 &info_dos_cmdlist);
1937 add_cmd ("address-pte", class_info, go32_pte_for_address, _("\
1938 Display a Page Table entry for a linear address.\n\
1939 The address argument must be a linear address, after adding to\n\
1940 it the base address of the appropriate segment.\n\
1941 The base address of variables and functions in the debuggee's data\n\
1942 or code segment is stored in the variable __djgpp_base_address,\n\
1943 so use `__djgpp_base_address + (char *)&var' as the argument.\n\
1944 For other segments, look up their base address in the output of\n\
1945 the `info dos ldt' command."),
1946 &info_dos_cmdlist);
1947 }
1948
1949 pid_t
1950 tcgetpgrp (int fd)
1951 {
1952 if (isatty (fd))
1953 return SOME_PID;
1954 errno = ENOTTY;
1955 return -1;
1956 }
1957
1958 int
1959 tcsetpgrp (int fd, pid_t pgid)
1960 {
1961 if (isatty (fd) && pgid == SOME_PID)
1962 return 0;
1963 errno = pgid == SOME_PID ? ENOTTY : ENOSYS;
1964 return -1;
1965 }
This page took 0.092491 seconds and 4 git commands to generate.