* go32-nat.c (read_memory_region): Make sure the segment limit was
[deliverable/binutils-gdb.git] / gdb / go32-nat.c
1 /* Native debugging support for Intel x86 running DJGPP.
2 Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
3 Written by Robert Hoehne.
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place - Suite 330,
20 Boston, MA 02111-1307, USA. */
21
22 #include <fcntl.h>
23
24 #include "defs.h"
25 #include "inferior.h"
26 #include "gdb_wait.h"
27 #include "gdbcore.h"
28 #include "command.h"
29 #include "gdbcmd.h"
30 #include "floatformat.h"
31 #include "buildsym.h"
32 #include "i387-nat.h"
33 #include "value.h"
34 #include "regcache.h"
35 #include "gdb_string.h"
36
37 #include <stdio.h> /* might be required for __DJGPP_MINOR__ */
38 #include <stdlib.h>
39 #include <ctype.h>
40 #include <errno.h>
41 #include <unistd.h>
42 #include <sys/utsname.h>
43 #include <io.h>
44 /* breakpoint.h defines `disable' which is an enum member. */
45 #define disable interrup_disable
46 #include <dos.h>
47 #undef disable
48 #include <dpmi.h>
49 #include <go32.h>
50 #include <sys/farptr.h>
51 #include <debug/v2load.h>
52 #include <debug/dbgcom.h>
53 #if __DJGPP_MINOR__ > 2
54 #include <debug/redir.h>
55 #endif
56
57 #if __DJGPP_MINOR__ < 3
58 /* This code will be provided from DJGPP 2.03 on. Until then I code it
59 here */
60 typedef struct
61 {
62 unsigned short sig0;
63 unsigned short sig1;
64 unsigned short sig2;
65 unsigned short sig3;
66 unsigned short exponent:15;
67 unsigned short sign:1;
68 }
69 NPXREG;
70
71 typedef struct
72 {
73 unsigned int control;
74 unsigned int status;
75 unsigned int tag;
76 unsigned int eip;
77 unsigned int cs;
78 unsigned int dataptr;
79 unsigned int datasel;
80 NPXREG reg[8];
81 }
82 NPX;
83
84 static NPX npx;
85
86 static void save_npx (void); /* Save the FPU of the debugged program */
87 static void load_npx (void); /* Restore the FPU of the debugged program */
88
89 /* ------------------------------------------------------------------------- */
90 /* Store the contents of the NPX in the global variable `npx'. */
91 /* *INDENT-OFF* */
92
93 static void
94 save_npx (void)
95 {
96 asm ("inb $0xa0, %%al
97 testb $0x20, %%al
98 jz 1f
99 xorb %% al, %%al
100 outb %% al, $0xf0
101 movb $0x20, %%al
102 outb %% al, $0xa0
103 outb %% al, $0x20
104 1:
105 fnsave % 0
106 fwait "
107 : "=m" (npx)
108 : /* No input */
109 : "%eax");
110 }
111
112 /* *INDENT-ON* */
113
114
115
116
117
118 /* ------------------------------------------------------------------------- */
119 /* Reload the contents of the NPX from the global variable `npx'. */
120
121 static void
122 load_npx (void)
123 {
124 asm ("frstor %0":"=m" (npx));
125 }
126 /* ------------------------------------------------------------------------- */
127 /* Stubs for the missing redirection functions. */
128 typedef struct {
129 char *command;
130 int redirected;
131 } cmdline_t;
132
133 void
134 redir_cmdline_delete (cmdline_t *ptr)
135 {
136 ptr->redirected = 0;
137 }
138
139 int
140 redir_cmdline_parse (const char *args, cmdline_t *ptr)
141 {
142 return -1;
143 }
144
145 int
146 redir_to_child (cmdline_t *ptr)
147 {
148 return 1;
149 }
150
151 int
152 redir_to_debugger (cmdline_t *ptr)
153 {
154 return 1;
155 }
156
157 int
158 redir_debug_init (cmdline_t *ptr)
159 {
160 return 0;
161 }
162 #endif /* __DJGPP_MINOR < 3 */
163
164 typedef enum { wp_insert, wp_remove, wp_count } wp_op;
165
166 /* This holds the current reference counts for each debug register. */
167 static int dr_ref_count[4];
168
169 #define SOME_PID 42
170
171 static int prog_has_started = 0;
172 static void go32_open (char *name, int from_tty);
173 static void go32_close (int quitting);
174 static void go32_attach (char *args, int from_tty);
175 static void go32_detach (char *args, int from_tty);
176 static void go32_resume (ptid_t ptid, int step,
177 enum target_signal siggnal);
178 static ptid_t go32_wait (ptid_t ptid,
179 struct target_waitstatus *status);
180 static void go32_fetch_registers (int regno);
181 static void store_register (int regno);
182 static void go32_store_registers (int regno);
183 static void go32_prepare_to_store (void);
184 static int go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
185 int write,
186 struct mem_attrib *attrib,
187 struct target_ops *target);
188 static void go32_files_info (struct target_ops *target);
189 static void go32_stop (void);
190 static void go32_kill_inferior (void);
191 static void go32_create_inferior (char *exec_file, char *args, char **env);
192 static void go32_mourn_inferior (void);
193 static int go32_can_run (void);
194
195 static struct target_ops go32_ops;
196 static void go32_terminal_init (void);
197 static void go32_terminal_inferior (void);
198 static void go32_terminal_ours (void);
199
200 #define r_ofs(x) (offsetof(TSS,x))
201
202 static struct
203 {
204 size_t tss_ofs;
205 size_t size;
206 }
207 regno_mapping[] =
208 {
209 {r_ofs (tss_eax), 4}, /* normal registers, from a_tss */
210 {r_ofs (tss_ecx), 4},
211 {r_ofs (tss_edx), 4},
212 {r_ofs (tss_ebx), 4},
213 {r_ofs (tss_esp), 4},
214 {r_ofs (tss_ebp), 4},
215 {r_ofs (tss_esi), 4},
216 {r_ofs (tss_edi), 4},
217 {r_ofs (tss_eip), 4},
218 {r_ofs (tss_eflags), 4},
219 {r_ofs (tss_cs), 2},
220 {r_ofs (tss_ss), 2},
221 {r_ofs (tss_ds), 2},
222 {r_ofs (tss_es), 2},
223 {r_ofs (tss_fs), 2},
224 {r_ofs (tss_gs), 2},
225 {0, 10}, /* 8 FP registers, from npx.reg[] */
226 {1, 10},
227 {2, 10},
228 {3, 10},
229 {4, 10},
230 {5, 10},
231 {6, 10},
232 {7, 10},
233 /* The order of the next 7 registers must be consistent
234 with their numbering in config/i386/tm-i386.h, which see. */
235 {0, 2}, /* control word, from npx */
236 {4, 2}, /* status word, from npx */
237 {8, 2}, /* tag word, from npx */
238 {16, 2}, /* last FP exception CS from npx */
239 {12, 4}, /* last FP exception EIP from npx */
240 {24, 2}, /* last FP exception operand selector from npx */
241 {20, 4}, /* last FP exception operand offset from npx */
242 {18, 2} /* last FP opcode from npx */
243 };
244
245 static struct
246 {
247 int go32_sig;
248 enum target_signal gdb_sig;
249 }
250 sig_map[] =
251 {
252 {0, TARGET_SIGNAL_FPE},
253 {1, TARGET_SIGNAL_TRAP},
254 /* Exception 2 is triggered by the NMI. DJGPP handles it as SIGILL,
255 but I think SIGBUS is better, since the NMI is usually activated
256 as a result of a memory parity check failure. */
257 {2, TARGET_SIGNAL_BUS},
258 {3, TARGET_SIGNAL_TRAP},
259 {4, TARGET_SIGNAL_FPE},
260 {5, TARGET_SIGNAL_SEGV},
261 {6, TARGET_SIGNAL_ILL},
262 {7, TARGET_SIGNAL_EMT}, /* no-coprocessor exception */
263 {8, TARGET_SIGNAL_SEGV},
264 {9, TARGET_SIGNAL_SEGV},
265 {10, TARGET_SIGNAL_BUS},
266 {11, TARGET_SIGNAL_SEGV},
267 {12, TARGET_SIGNAL_SEGV},
268 {13, TARGET_SIGNAL_SEGV},
269 {14, TARGET_SIGNAL_SEGV},
270 {16, TARGET_SIGNAL_FPE},
271 {17, TARGET_SIGNAL_BUS},
272 {31, TARGET_SIGNAL_ILL},
273 {0x1b, TARGET_SIGNAL_INT},
274 {0x75, TARGET_SIGNAL_FPE},
275 {0x78, TARGET_SIGNAL_ALRM},
276 {0x79, TARGET_SIGNAL_INT},
277 {0x7a, TARGET_SIGNAL_QUIT},
278 {-1, TARGET_SIGNAL_LAST}
279 };
280
281 static struct {
282 enum target_signal gdb_sig;
283 int djgpp_excepno;
284 } excepn_map[] = {
285 {TARGET_SIGNAL_0, -1},
286 {TARGET_SIGNAL_ILL, 6}, /* Invalid Opcode */
287 {TARGET_SIGNAL_EMT, 7}, /* triggers SIGNOFP */
288 {TARGET_SIGNAL_SEGV, 13}, /* GPF */
289 {TARGET_SIGNAL_BUS, 17}, /* Alignment Check */
290 /* The rest are fake exceptions, see dpmiexcp.c in djlsr*.zip for
291 details. */
292 {TARGET_SIGNAL_TERM, 0x1b}, /* triggers Ctrl-Break type of SIGINT */
293 {TARGET_SIGNAL_FPE, 0x75},
294 {TARGET_SIGNAL_INT, 0x79},
295 {TARGET_SIGNAL_QUIT, 0x7a},
296 {TARGET_SIGNAL_ALRM, 0x78}, /* triggers SIGTIMR */
297 {TARGET_SIGNAL_PROF, 0x78},
298 {TARGET_SIGNAL_LAST, -1}
299 };
300
301 static void
302 go32_open (char *name, int from_tty)
303 {
304 printf_unfiltered ("Done. Use the \"run\" command to run the program.\n");
305 }
306
307 static void
308 go32_close (int quitting)
309 {
310 }
311
312 static void
313 go32_attach (char *args, int from_tty)
314 {
315 error ("\
316 You cannot attach to a running program on this platform.\n\
317 Use the `run' command to run DJGPP programs.");
318 }
319
320 static void
321 go32_detach (char *args, int from_tty)
322 {
323 }
324
325 static int resume_is_step;
326 static int resume_signal = -1;
327
328 static void
329 go32_resume (ptid_t ptid, int step, enum target_signal siggnal)
330 {
331 int i;
332
333 resume_is_step = step;
334
335 if (siggnal != TARGET_SIGNAL_0 && siggnal != TARGET_SIGNAL_TRAP)
336 {
337 for (i = 0, resume_signal = -1;
338 excepn_map[i].gdb_sig != TARGET_SIGNAL_LAST; i++)
339 if (excepn_map[i].gdb_sig == siggnal)
340 {
341 resume_signal = excepn_map[i].djgpp_excepno;
342 break;
343 }
344 if (resume_signal == -1)
345 printf_unfiltered ("Cannot deliver signal %s on this platform.\n",
346 target_signal_to_name (siggnal));
347 }
348 }
349
350 static char child_cwd[FILENAME_MAX];
351
352 static ptid_t
353 go32_wait (ptid_t ptid, struct target_waitstatus *status)
354 {
355 int i;
356 unsigned char saved_opcode;
357 unsigned long INT3_addr = 0;
358 int stepping_over_INT = 0;
359
360 a_tss.tss_eflags &= 0xfeff; /* reset the single-step flag (TF) */
361 if (resume_is_step)
362 {
363 /* If the next instruction is INT xx or INTO, we need to handle
364 them specially. Intel manuals say that these instructions
365 reset the single-step flag (a.k.a. TF). However, it seems
366 that, at least in the DPMI environment, and at least when
367 stepping over the DPMI interrupt 31h, the problem is having
368 TF set at all when INT 31h is executed: the debuggee either
369 crashes (and takes the system with it) or is killed by a
370 SIGTRAP.
371
372 So we need to emulate single-step mode: we put an INT3 opcode
373 right after the INT xx instruction, let the debuggee run
374 until it hits INT3 and stops, then restore the original
375 instruction which we overwrote with the INT3 opcode, and back
376 up the debuggee's EIP to that instruction. */
377 read_child (a_tss.tss_eip, &saved_opcode, 1);
378 if (saved_opcode == 0xCD || saved_opcode == 0xCE)
379 {
380 unsigned char INT3_opcode = 0xCC;
381
382 INT3_addr
383 = saved_opcode == 0xCD ? a_tss.tss_eip + 2 : a_tss.tss_eip + 1;
384 stepping_over_INT = 1;
385 read_child (INT3_addr, &saved_opcode, 1);
386 write_child (INT3_addr, &INT3_opcode, 1);
387 }
388 else
389 a_tss.tss_eflags |= 0x0100; /* normal instruction: set TF */
390 }
391
392 /* The special value FFFFh in tss_trap indicates to run_child that
393 tss_irqn holds a signal to be delivered to the debuggee. */
394 if (resume_signal <= -1)
395 {
396 a_tss.tss_trap = 0;
397 a_tss.tss_irqn = 0xff;
398 }
399 else
400 {
401 a_tss.tss_trap = 0xffff; /* run_child looks for this */
402 a_tss.tss_irqn = resume_signal;
403 }
404
405 /* The child might change working directory behind our back. The
406 GDB users won't like the side effects of that when they work with
407 relative file names, and GDB might be confused by its current
408 directory not being in sync with the truth. So we always make a
409 point of changing back to where GDB thinks is its cwd, when we
410 return control to the debugger, but restore child's cwd before we
411 run it. */
412 /* Initialize child_cwd, before the first call to run_child and not
413 in the initialization, so the child get also the changed directory
414 set with the gdb-command "cd ..." */
415 if (!*child_cwd)
416 /* Initialize child's cwd with the current one. */
417 getcwd (child_cwd, sizeof (child_cwd));
418
419 chdir (child_cwd);
420
421 #if __DJGPP_MINOR__ < 3
422 load_npx ();
423 #endif
424 run_child ();
425 #if __DJGPP_MINOR__ < 3
426 save_npx ();
427 #endif
428
429 /* Did we step over an INT xx instruction? */
430 if (stepping_over_INT && a_tss.tss_eip == INT3_addr + 1)
431 {
432 /* Restore the original opcode. */
433 a_tss.tss_eip--; /* EIP points *after* the INT3 instruction */
434 write_child (a_tss.tss_eip, &saved_opcode, 1);
435 /* Simulate a TRAP exception. */
436 a_tss.tss_irqn = 1;
437 a_tss.tss_eflags |= 0x0100;
438 }
439
440 getcwd (child_cwd, sizeof (child_cwd)); /* in case it has changed */
441 chdir (current_directory);
442
443 if (a_tss.tss_irqn == 0x21)
444 {
445 status->kind = TARGET_WAITKIND_EXITED;
446 status->value.integer = a_tss.tss_eax & 0xff;
447 }
448 else
449 {
450 status->value.sig = TARGET_SIGNAL_UNKNOWN;
451 status->kind = TARGET_WAITKIND_STOPPED;
452 for (i = 0; sig_map[i].go32_sig != -1; i++)
453 {
454 if (a_tss.tss_irqn == sig_map[i].go32_sig)
455 {
456 #if __DJGPP_MINOR__ < 3
457 if ((status->value.sig = sig_map[i].gdb_sig) !=
458 TARGET_SIGNAL_TRAP)
459 status->kind = TARGET_WAITKIND_SIGNALLED;
460 #else
461 status->value.sig = sig_map[i].gdb_sig;
462 #endif
463 break;
464 }
465 }
466 }
467 return pid_to_ptid (SOME_PID);
468 }
469
470 static void
471 fetch_register (int regno)
472 {
473 if (regno < FP0_REGNUM)
474 supply_register (regno, (char *) &a_tss + regno_mapping[regno].tss_ofs);
475 else if (regno <= LAST_FPU_CTRL_REGNUM)
476 i387_supply_register (regno, (char *) &npx);
477 else
478 internal_error (__FILE__, __LINE__,
479 "Invalid register no. %d in fetch_register.", regno);
480 }
481
482 static void
483 go32_fetch_registers (int regno)
484 {
485 if (regno >= 0)
486 fetch_register (regno);
487 else
488 {
489 for (regno = 0; regno < FP0_REGNUM; regno++)
490 fetch_register (regno);
491 i387_supply_fsave ((char *) &npx);
492 }
493 }
494
495 static void
496 store_register (int regno)
497 {
498 void *rp;
499 void *v = (void *) register_buffer (regno);
500
501 if (regno < FP0_REGNUM)
502 memcpy ((char *) &a_tss + regno_mapping[regno].tss_ofs,
503 v, regno_mapping[regno].size);
504 else if (regno <= LAST_FPU_CTRL_REGNUM)
505 i387_fill_fsave ((char *)&npx, regno);
506 else
507 internal_error (__FILE__, __LINE__,
508 "Invalid register no. %d in store_register.", regno);
509 }
510
511 static void
512 go32_store_registers (int regno)
513 {
514 unsigned r;
515
516 if (regno >= 0)
517 store_register (regno);
518 else
519 {
520 for (r = 0; r < FP0_REGNUM; r++)
521 store_register (r);
522 i387_fill_fsave ((char *) &npx, -1);
523 }
524 }
525
526 static void
527 go32_prepare_to_store (void)
528 {
529 }
530
531 static int
532 go32_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
533 struct mem_attrib *attrib, struct target_ops *target)
534 {
535 if (write)
536 {
537 if (write_child (memaddr, myaddr, len))
538 {
539 return 0;
540 }
541 else
542 {
543 return len;
544 }
545 }
546 else
547 {
548 if (read_child (memaddr, myaddr, len))
549 {
550 return 0;
551 }
552 else
553 {
554 return len;
555 }
556 }
557 }
558
559 static cmdline_t child_cmd; /* parsed child's command line kept here */
560
561 static void
562 go32_files_info (struct target_ops *target)
563 {
564 printf_unfiltered ("You are running a DJGPP V2 program.\n");
565 }
566
567 static void
568 go32_stop (void)
569 {
570 normal_stop ();
571 cleanup_client ();
572 inferior_ptid = null_ptid;
573 prog_has_started = 0;
574 }
575
576 static void
577 go32_kill_inferior (void)
578 {
579 redir_cmdline_delete (&child_cmd);
580 resume_signal = -1;
581 resume_is_step = 0;
582 unpush_target (&go32_ops);
583 }
584
585 static void
586 go32_create_inferior (char *exec_file, char *args, char **env)
587 {
588 extern char **environ;
589 jmp_buf start_state;
590 char *cmdline;
591 char **env_save = environ;
592 size_t cmdlen;
593
594 /* If no exec file handed to us, get it from the exec-file command -- with
595 a good, common error message if none is specified. */
596 if (exec_file == 0)
597 exec_file = get_exec_file (1);
598
599 if (prog_has_started)
600 {
601 go32_stop ();
602 go32_kill_inferior ();
603 }
604 resume_signal = -1;
605 resume_is_step = 0;
606
607 /* Initialize child's cwd as empty to be initialized when starting
608 the child. */
609 *child_cwd = 0;
610
611 /* Init command line storage. */
612 if (redir_debug_init (&child_cmd) == -1)
613 internal_error (__FILE__, __LINE__,
614 "Cannot allocate redirection storage: not enough memory.\n");
615
616 /* Parse the command line and create redirections. */
617 if (strpbrk (args, "<>"))
618 {
619 if (redir_cmdline_parse (args, &child_cmd) == 0)
620 args = child_cmd.command;
621 else
622 error ("Syntax error in command line.");
623 }
624 else
625 child_cmd.command = xstrdup (args);
626
627 cmdlen = strlen (args);
628 /* v2loadimage passes command lines via DOS memory, so it cannot
629 possibly handle commands longer than 1MB. */
630 if (cmdlen > 1024*1024)
631 error ("Command line too long.");
632
633 cmdline = xmalloc (cmdlen + 4);
634 strcpy (cmdline + 1, args);
635 /* If the command-line length fits into DOS 126-char limits, use the
636 DOS command tail format; otherwise, tell v2loadimage to pass it
637 through a buffer in conventional memory. */
638 if (cmdlen < 127)
639 {
640 cmdline[0] = strlen (args);
641 cmdline[cmdlen + 1] = 13;
642 }
643 else
644 cmdline[0] = 0xff; /* signal v2loadimage it's a long command */
645
646 environ = env;
647
648 if (v2loadimage (exec_file, cmdline, start_state))
649 {
650 environ = env_save;
651 printf_unfiltered ("Load failed for image %s\n", exec_file);
652 exit (1);
653 }
654 environ = env_save;
655 free (cmdline);
656
657 edi_init (start_state);
658 #if __DJGPP_MINOR__ < 3
659 save_npx ();
660 #endif
661
662 inferior_ptid = pid_to_ptid (SOME_PID);
663 push_target (&go32_ops);
664 clear_proceed_status ();
665 insert_breakpoints ();
666 proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
667 prog_has_started = 1;
668 }
669
670 static void
671 go32_mourn_inferior (void)
672 {
673 /* We need to make sure all the breakpoint enable bits in the DR7
674 register are reset when the inferior exits. Otherwise, if they
675 rerun the inferior, the uncleared bits may cause random SIGTRAPs,
676 failure to set more watchpoints, and other calamities. It would
677 be nice if GDB itself would take care to remove all breakpoints
678 at all times, but it doesn't, probably under an assumption that
679 the OS cleans up when the debuggee exits. */
680 i386_cleanup_dregs ();
681 go32_kill_inferior ();
682 generic_mourn_inferior ();
683 }
684
685 static int
686 go32_can_run (void)
687 {
688 return 1;
689 }
690
691 /* Hardware watchpoint support. */
692
693 #define D_REGS edi.dr
694 #define CONTROL D_REGS[7]
695 #define STATUS D_REGS[6]
696
697 /* Pass the address ADDR to the inferior in the I'th debug register.
698 Here we just store the address in D_REGS, the watchpoint will be
699 actually set up when go32_wait runs the debuggee. */
700 void
701 go32_set_dr (int i, CORE_ADDR addr)
702 {
703 if (i < 0 || i > 3)
704 internal_error (__FILE__, __LINE__,
705 "Invalid register %d in go32_set_dr.\n", i);
706 D_REGS[i] = addr;
707 }
708
709 /* Pass the value VAL to the inferior in the DR7 debug control
710 register. Here we just store the address in D_REGS, the watchpoint
711 will be actually set up when go32_wait runs the debuggee. */
712 void
713 go32_set_dr7 (unsigned val)
714 {
715 CONTROL = val;
716 }
717
718 /* Get the value of the DR6 debug status register from the inferior.
719 Here we just return the value stored in D_REGS, as we've got it
720 from the last go32_wait call. */
721 unsigned
722 go32_get_dr6 (void)
723 {
724 return STATUS;
725 }
726
727 /* Put the device open on handle FD into either raw or cooked
728 mode, return 1 if it was in raw mode, zero otherwise. */
729
730 static int
731 device_mode (int fd, int raw_p)
732 {
733 int oldmode, newmode;
734 __dpmi_regs regs;
735
736 regs.x.ax = 0x4400;
737 regs.x.bx = fd;
738 __dpmi_int (0x21, &regs);
739 if (regs.x.flags & 1)
740 return -1;
741 newmode = oldmode = regs.x.dx;
742
743 if (raw_p)
744 newmode |= 0x20;
745 else
746 newmode &= ~0x20;
747
748 if (oldmode & 0x80) /* Only for character dev */
749 {
750 regs.x.ax = 0x4401;
751 regs.x.bx = fd;
752 regs.x.dx = newmode & 0xff; /* Force upper byte zero, else it fails */
753 __dpmi_int (0x21, &regs);
754 if (regs.x.flags & 1)
755 return -1;
756 }
757 return (oldmode & 0x20) == 0x20;
758 }
759
760
761 static int inf_mode_valid = 0;
762 static int inf_terminal_mode;
763
764 /* This semaphore is needed because, amazingly enough, GDB calls
765 target.to_terminal_ours more than once after the inferior stops.
766 But we need the information from the first call only, since the
767 second call will always see GDB's own cooked terminal. */
768 static int terminal_is_ours = 1;
769
770 static void
771 go32_terminal_init (void)
772 {
773 inf_mode_valid = 0; /* reinitialize, in case they are restarting child */
774 terminal_is_ours = 1;
775 }
776
777 static void
778 go32_terminal_info (char *args, int from_tty)
779 {
780 printf_unfiltered ("Inferior's terminal is in %s mode.\n",
781 !inf_mode_valid
782 ? "default" : inf_terminal_mode ? "raw" : "cooked");
783
784 #if __DJGPP_MINOR__ > 2
785 if (child_cmd.redirection)
786 {
787 int i;
788
789 for (i = 0; i < DBG_HANDLES; i++)
790 {
791 if (child_cmd.redirection[i]->file_name)
792 printf_unfiltered ("\tFile handle %d is redirected to `%s'.\n",
793 i, child_cmd.redirection[i]->file_name);
794 else if (_get_dev_info (child_cmd.redirection[i]->inf_handle) == -1)
795 printf_unfiltered
796 ("\tFile handle %d appears to be closed by inferior.\n", i);
797 /* Mask off the raw/cooked bit when comparing device info words. */
798 else if ((_get_dev_info (child_cmd.redirection[i]->inf_handle) & 0xdf)
799 != (_get_dev_info (i) & 0xdf))
800 printf_unfiltered
801 ("\tFile handle %d appears to be redirected by inferior.\n", i);
802 }
803 }
804 #endif
805 }
806
807 static void
808 go32_terminal_inferior (void)
809 {
810 /* Redirect standard handles as child wants them. */
811 errno = 0;
812 if (redir_to_child (&child_cmd) == -1)
813 {
814 redir_to_debugger (&child_cmd);
815 error ("Cannot redirect standard handles for program: %s.",
816 strerror (errno));
817 }
818 /* set the console device of the inferior to whatever mode
819 (raw or cooked) we found it last time */
820 if (terminal_is_ours)
821 {
822 if (inf_mode_valid)
823 device_mode (0, inf_terminal_mode);
824 terminal_is_ours = 0;
825 }
826 }
827
828 static void
829 go32_terminal_ours (void)
830 {
831 /* Switch to cooked mode on the gdb terminal and save the inferior
832 terminal mode to be restored when it is resumed */
833 if (!terminal_is_ours)
834 {
835 inf_terminal_mode = device_mode (0, 0);
836 if (inf_terminal_mode != -1)
837 inf_mode_valid = 1;
838 else
839 /* If device_mode returned -1, we don't know what happens with
840 handle 0 anymore, so make the info invalid. */
841 inf_mode_valid = 0;
842 terminal_is_ours = 1;
843
844 /* Restore debugger's standard handles. */
845 errno = 0;
846 if (redir_to_debugger (&child_cmd) == -1)
847 {
848 redir_to_child (&child_cmd);
849 error ("Cannot redirect standard handles for debugger: %s.",
850 strerror (errno));
851 }
852 }
853 }
854
855 static void
856 init_go32_ops (void)
857 {
858 go32_ops.to_shortname = "djgpp";
859 go32_ops.to_longname = "djgpp target process";
860 go32_ops.to_doc =
861 "Program loaded by djgpp, when gdb is used as an external debugger";
862 go32_ops.to_open = go32_open;
863 go32_ops.to_close = go32_close;
864 go32_ops.to_attach = go32_attach;
865 go32_ops.to_detach = go32_detach;
866 go32_ops.to_resume = go32_resume;
867 go32_ops.to_wait = go32_wait;
868 go32_ops.to_fetch_registers = go32_fetch_registers;
869 go32_ops.to_store_registers = go32_store_registers;
870 go32_ops.to_prepare_to_store = go32_prepare_to_store;
871 go32_ops.to_xfer_memory = go32_xfer_memory;
872 go32_ops.to_files_info = go32_files_info;
873 go32_ops.to_insert_breakpoint = memory_insert_breakpoint;
874 go32_ops.to_remove_breakpoint = memory_remove_breakpoint;
875 go32_ops.to_terminal_init = go32_terminal_init;
876 go32_ops.to_terminal_inferior = go32_terminal_inferior;
877 go32_ops.to_terminal_ours_for_output = go32_terminal_ours;
878 go32_ops.to_terminal_ours = go32_terminal_ours;
879 go32_ops.to_terminal_info = go32_terminal_info;
880 go32_ops.to_kill = go32_kill_inferior;
881 go32_ops.to_create_inferior = go32_create_inferior;
882 go32_ops.to_mourn_inferior = go32_mourn_inferior;
883 go32_ops.to_can_run = go32_can_run;
884 go32_ops.to_stop = go32_stop;
885 go32_ops.to_stratum = process_stratum;
886 go32_ops.to_has_all_memory = 1;
887 go32_ops.to_has_memory = 1;
888 go32_ops.to_has_stack = 1;
889 go32_ops.to_has_registers = 1;
890 go32_ops.to_has_execution = 1;
891 go32_ops.to_magic = OPS_MAGIC;
892
893 /* Initialize child's cwd as empty to be initialized when starting
894 the child. */
895 *child_cwd = 0;
896
897 /* Initialize child's command line storage. */
898 if (redir_debug_init (&child_cmd) == -1)
899 internal_error (__FILE__, __LINE__,
900 "Cannot allocate redirection storage: not enough memory.\n");
901
902 /* We are always processing GCC-compiled programs. */
903 processing_gcc_compilation = 2;
904 }
905
906 unsigned short windows_major, windows_minor;
907
908 /* Compute the version Windows reports via Int 2Fh/AX=1600h. */
909 static void
910 go32_get_windows_version(void)
911 {
912 __dpmi_regs r;
913
914 r.x.ax = 0x1600;
915 __dpmi_int(0x2f, &r);
916 if (r.h.al > 2 && r.h.al != 0x80 && r.h.al != 0xff
917 && (r.h.al > 3 || r.h.ah > 0))
918 {
919 windows_major = r.h.al;
920 windows_minor = r.h.ah;
921 }
922 else
923 windows_major = 0xff; /* meaning no Windows */
924 }
925
926 /* A subroutine of go32_sysinfo to display memory info. */
927 static void
928 print_mem (unsigned long datum, const char *header, int in_pages_p)
929 {
930 if (datum != 0xffffffffUL)
931 {
932 if (in_pages_p)
933 datum <<= 12;
934 puts_filtered (header);
935 if (datum > 1024)
936 {
937 printf_filtered ("%lu KB", datum >> 10);
938 if (datum > 1024 * 1024)
939 printf_filtered (" (%lu MB)", datum >> 20);
940 }
941 else
942 printf_filtered ("%lu Bytes", datum);
943 puts_filtered ("\n");
944 }
945 }
946
947 /* Display assorted information about the underlying OS. */
948 static void
949 go32_sysinfo (char *arg, int from_tty)
950 {
951 struct utsname u;
952 char cpuid_vendor[13];
953 unsigned cpuid_max = 0, cpuid_eax, cpuid_ebx, cpuid_ecx, cpuid_edx;
954 unsigned true_dos_version = _get_dos_version (1);
955 unsigned advertized_dos_version = ((unsigned int)_osmajor << 8) | _osminor;
956 int dpmi_flags;
957 char dpmi_vendor_info[129];
958 int dpmi_vendor_available =
959 __dpmi_get_capabilities (&dpmi_flags, dpmi_vendor_info);
960 __dpmi_version_ret dpmi_version_data;
961 long eflags;
962 __dpmi_free_mem_info mem_info;
963 __dpmi_regs regs;
964
965 cpuid_vendor[0] = '\0';
966 if (uname (&u))
967 strcpy (u.machine, "Unknown x86");
968 else if (u.machine[0] == 'i' && u.machine[1] > 4)
969 {
970 /* CPUID with EAX = 0 returns the Vendor ID. */
971 __asm__ __volatile__ ("xorl %%ebx, %%ebx;"
972 "xorl %%ecx, %%ecx;"
973 "xorl %%edx, %%edx;"
974 "movl $0, %%eax;"
975 "cpuid;"
976 "movl %%ebx, %0;"
977 "movl %%edx, %1;"
978 "movl %%ecx, %2;"
979 "movl %%eax, %3;"
980 : "=m" (cpuid_vendor[0]),
981 "=m" (cpuid_vendor[4]),
982 "=m" (cpuid_vendor[8]),
983 "=m" (cpuid_max)
984 :
985 : "%eax", "%ebx", "%ecx", "%edx");
986 cpuid_vendor[12] = '\0';
987 }
988
989 printf_filtered ("CPU Type.......................%s", u.machine);
990 if (cpuid_vendor[0])
991 printf_filtered (" (%s)", cpuid_vendor);
992 puts_filtered ("\n");
993
994 /* CPUID with EAX = 1 returns processor signature and features. */
995 if (cpuid_max >= 1)
996 {
997 static char *brand_name[] = {
998 "",
999 " Celeron",
1000 " III",
1001 " III Xeon",
1002 "", "", "", "",
1003 " 4"
1004 };
1005 char cpu_string[80];
1006 char cpu_brand[20];
1007 unsigned brand_idx;
1008 int intel_p = strcmp (cpuid_vendor, "GenuineIntel") == 0;
1009 int amd_p = strcmp (cpuid_vendor, "AuthenticAMD") == 0;
1010 unsigned cpu_family, cpu_model;
1011
1012 __asm__ __volatile__ ("movl $1, %%eax;"
1013 "cpuid;"
1014 : "=a" (cpuid_eax),
1015 "=b" (cpuid_ebx),
1016 "=d" (cpuid_edx)
1017 :
1018 : "%ecx");
1019 brand_idx = cpuid_ebx & 0xff;
1020 cpu_family = (cpuid_eax >> 8) & 0xf;
1021 cpu_model = (cpuid_eax >> 4) & 0xf;
1022 cpu_brand[0] = '\0';
1023 if (intel_p)
1024 {
1025 if (brand_idx > 0
1026 && brand_idx < sizeof(brand_name)/sizeof(brand_name[0])
1027 && *brand_name[brand_idx])
1028 strcpy (cpu_brand, brand_name[brand_idx]);
1029 else if (cpu_family == 5)
1030 {
1031 if (((cpuid_eax >> 12) & 3) == 0 && cpu_model == 4)
1032 strcpy (cpu_brand, " MMX");
1033 else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 1)
1034 strcpy (cpu_brand, " OverDrive");
1035 else if (cpu_model > 1 && ((cpuid_eax >> 12) & 3) == 2)
1036 strcpy (cpu_brand, " Dual");
1037 }
1038 else if (cpu_family == 6 && cpu_model < 8)
1039 {
1040 switch (cpu_model)
1041 {
1042 case 1:
1043 strcpy (cpu_brand, " Pro");
1044 break;
1045 case 3:
1046 strcpy (cpu_brand, " II");
1047 break;
1048 case 5:
1049 strcpy (cpu_brand, " II Xeon");
1050 break;
1051 case 6:
1052 strcpy (cpu_brand, " Celeron");
1053 break;
1054 case 7:
1055 strcpy (cpu_brand, " III");
1056 break;
1057 }
1058 }
1059 }
1060 else if (amd_p)
1061 {
1062 switch (cpu_family)
1063 {
1064 case 4:
1065 strcpy (cpu_brand, "486/5x86");
1066 break;
1067 case 5:
1068 switch (cpu_model)
1069 {
1070 case 0:
1071 case 1:
1072 case 2:
1073 case 3:
1074 strcpy (cpu_brand, "-K5");
1075 break;
1076 case 6:
1077 case 7:
1078 strcpy (cpu_brand, "-K6");
1079 break;
1080 case 8:
1081 strcpy (cpu_brand, "-K6-2");
1082 break;
1083 case 9:
1084 strcpy (cpu_brand, "-K6-III");
1085 break;
1086 }
1087 break;
1088 case 6:
1089 switch (cpu_model)
1090 {
1091 case 1:
1092 case 2:
1093 case 4:
1094 strcpy (cpu_brand, " Athlon");
1095 break;
1096 case 3:
1097 strcpy (cpu_brand, " Duron");
1098 break;
1099 }
1100 break;
1101 }
1102 }
1103 sprintf (cpu_string, "%s%s Model %d Stepping %d",
1104 intel_p ? "Pentium" : (amd_p ? "AMD" : "ix86"),
1105 cpu_brand, cpu_model, cpuid_eax & 0xf);
1106 printfi_filtered (31, "%s\n", cpu_string);
1107 if (((cpuid_edx & (6 | (0x0d << 23))) != 0)
1108 || ((cpuid_edx & 1) == 0)
1109 || (amd_p && (cpuid_edx & (3 << 30)) != 0))
1110 {
1111 puts_filtered ("CPU Features...................");
1112 /* We only list features which might be useful in the DPMI
1113 environment. */
1114 if ((cpuid_edx & 1) == 0)
1115 puts_filtered ("No FPU "); /* it's unusual to not have an FPU */
1116 if ((cpuid_edx & (1 << 1)) != 0)
1117 puts_filtered ("VME ");
1118 if ((cpuid_edx & (1 << 2)) != 0)
1119 puts_filtered ("DE ");
1120 if ((cpuid_edx & (1 << 4)) != 0)
1121 puts_filtered ("TSC ");
1122 if ((cpuid_edx & (1 << 23)) != 0)
1123 puts_filtered ("MMX ");
1124 if ((cpuid_edx & (1 << 25)) != 0)
1125 puts_filtered ("SSE ");
1126 if ((cpuid_edx & (1 << 26)) != 0)
1127 puts_filtered ("SSE2 ");
1128 if (amd_p)
1129 {
1130 if ((cpuid_edx & (1 << 31)) != 0)
1131 puts_filtered ("3DNow! ");
1132 if ((cpuid_edx & (1 << 30)) != 0)
1133 puts_filtered ("3DNow!Ext");
1134 }
1135 puts_filtered ("\n");
1136 }
1137 }
1138 puts_filtered ("\n");
1139 printf_filtered ("DOS Version....................%s %s.%s",
1140 _os_flavor, u.release, u.version);
1141 if (true_dos_version != advertized_dos_version)
1142 printf_filtered (" (disguised as v%d.%d)", _osmajor, _osminor);
1143 puts_filtered ("\n");
1144 if (!windows_major)
1145 go32_get_windows_version ();
1146 if (windows_major != 0xff)
1147 {
1148 const char *windows_flavor;
1149
1150 printf_filtered ("Windows Version................%d.%02d (Windows ",
1151 windows_major, windows_minor);
1152 switch (windows_major)
1153 {
1154 case 3:
1155 windows_flavor = "3.X";
1156 break;
1157 case 4:
1158 switch (windows_minor)
1159 {
1160 case 0:
1161 windows_flavor = "95, 95A, or 95B";
1162 break;
1163 case 3:
1164 windows_flavor = "95B OSR2.1 or 95C OSR2.5";
1165 break;
1166 case 10:
1167 windows_flavor = "98 or 98 SE";
1168 break;
1169 case 90:
1170 windows_flavor = "ME";
1171 break;
1172 default:
1173 windows_flavor = "9X";
1174 break;
1175 }
1176 break;
1177 default:
1178 windows_flavor = "??";
1179 break;
1180 }
1181 printf_filtered ("%s)\n", windows_flavor);
1182 }
1183 else if (true_dos_version == 0x532 && advertized_dos_version == 0x500)
1184 printf_filtered ("Windows Version................Windows NT or Windows 2000\n");
1185 puts_filtered ("\n");
1186 if (dpmi_vendor_available == 0)
1187 {
1188 /* The DPMI spec says the vendor string should be ASCIIZ, but
1189 I don't trust the vendors to follow that... */
1190 if (!memchr (&dpmi_vendor_info[2], 0, 126))
1191 dpmi_vendor_info[128] = '\0';
1192 printf_filtered ("DPMI Host......................%s v%d.%d (capabilities: %#x)\n",
1193 &dpmi_vendor_info[2],
1194 (unsigned)dpmi_vendor_info[0],
1195 (unsigned)dpmi_vendor_info[1],
1196 ((unsigned)dpmi_flags & 0x7f));
1197 }
1198 __dpmi_get_version (&dpmi_version_data);
1199 printf_filtered ("DPMI Version...................%d.%02d\n",
1200 dpmi_version_data.major, dpmi_version_data.minor);
1201 printf_filtered ("DPMI Info......................%s-bit DPMI, with%s Virtual Memory support\n",
1202 (dpmi_version_data.flags & 1) ? "32" : "16",
1203 (dpmi_version_data.flags & 4) ? "" : "out");
1204 printfi_filtered (31, "Interrupts reflected to %s mode\n",
1205 (dpmi_version_data.flags & 2) ? "V86" : "Real");
1206 printfi_filtered (31, "Processor type: i%d86\n",
1207 dpmi_version_data.cpu);
1208 printfi_filtered (31, "PIC base interrupt: Master: %#x Slave: %#x\n",
1209 dpmi_version_data.master_pic, dpmi_version_data.slave_pic);
1210
1211 /* a_tss is only initialized when the debuggee is first run. */
1212 if (prog_has_started)
1213 {
1214 __asm__ __volatile__ ("pushfl ; popl %0" : "=g" (eflags));
1215 printf_filtered ("Protection.....................Ring %d (in %s), with%s I/O protection\n",
1216 a_tss.tss_cs & 3, (a_tss.tss_cs & 4) ? "LDT" : "GDT",
1217 (a_tss.tss_cs & 3) > ((eflags >> 12) & 3) ? "" : "out");
1218 }
1219 puts_filtered ("\n");
1220 __dpmi_get_free_memory_information (&mem_info);
1221 print_mem (mem_info.total_number_of_physical_pages,
1222 "DPMI Total Physical Memory.....", 1);
1223 print_mem (mem_info.total_number_of_free_pages,
1224 "DPMI Free Physical Memory......", 1);
1225 print_mem (mem_info.size_of_paging_file_partition_in_pages,
1226 "DPMI Swap Space................", 1);
1227 print_mem (mem_info.linear_address_space_size_in_pages,
1228 "DPMI Total Linear Address Size.", 1);
1229 print_mem (mem_info.free_linear_address_space_in_pages,
1230 "DPMI Free Linear Address Size..", 1);
1231 print_mem (mem_info.largest_available_free_block_in_bytes,
1232 "DPMI Largest Free Memory Block.", 0);
1233
1234 regs.h.ah = 0x48;
1235 regs.x.bx = 0xffff;
1236 __dpmi_int (0x21, &regs);
1237 print_mem (regs.x.bx << 4, "Free DOS Memory................", 0);
1238 regs.x.ax = 0x5800;
1239 __dpmi_int (0x21, &regs);
1240 if ((regs.x.flags & 1) == 0)
1241 {
1242 static const char *dos_hilo[] = {
1243 "Low", "", "", "", "High", "", "", "", "High, then Low"
1244 };
1245 static const char *dos_fit[] = {
1246 "First", "Best", "Last"
1247 };
1248 int hilo_idx = (regs.x.ax >> 4) & 0x0f;
1249 int fit_idx = regs.x.ax & 0x0f;
1250
1251 if (hilo_idx > 8)
1252 hilo_idx = 0;
1253 if (fit_idx > 2)
1254 fit_idx = 0;
1255 printf_filtered ("DOS Memory Allocation..........%s memory, %s fit\n",
1256 dos_hilo[hilo_idx], dos_fit[fit_idx]);
1257 regs.x.ax = 0x5802;
1258 __dpmi_int (0x21, &regs);
1259 if ((regs.x.flags & 1) != 0)
1260 regs.h.al = 0;
1261 printfi_filtered (31, "UMBs %sin DOS memory chain\n",
1262 regs.h.al == 0 ? "not " : "");
1263 }
1264 }
1265
1266 struct seg_descr {
1267 unsigned short limit0 __attribute__((packed));
1268 unsigned short base0 __attribute__((packed));
1269 unsigned char base1 __attribute__((packed));
1270 unsigned stype:5 __attribute__((packed));
1271 unsigned dpl:2 __attribute__((packed));
1272 unsigned present:1 __attribute__((packed));
1273 unsigned limit1:4 __attribute__((packed));
1274 unsigned available:1 __attribute__((packed));
1275 unsigned dummy:1 __attribute__((packed));
1276 unsigned bit32:1 __attribute__((packed));
1277 unsigned page_granular:1 __attribute__((packed));
1278 unsigned char base2 __attribute__((packed));
1279 };
1280
1281 struct gate_descr {
1282 unsigned short offset0 __attribute__((packed));
1283 unsigned short selector __attribute__((packed));
1284 unsigned param_count:5 __attribute__((packed));
1285 unsigned dummy:3 __attribute__((packed));
1286 unsigned stype:5 __attribute__((packed));
1287 unsigned dpl:2 __attribute__((packed));
1288 unsigned present:1 __attribute__((packed));
1289 unsigned short offset1 __attribute__((packed));
1290 };
1291
1292 /* Read LEN bytes starting at logical address ADDR, and put the result
1293 into DEST. Return 1 if success, zero if not. */
1294 static int
1295 read_memory_region (unsigned long addr, void *dest, size_t len)
1296 {
1297 unsigned long dos_ds_limit = __dpmi_get_segment_limit (_dos_ds);
1298 int retval = 1;
1299
1300 /* For the low memory, we can simply use _dos_ds. */
1301 if (addr <= dos_ds_limit - len)
1302 dosmemget (addr, len, dest);
1303 else
1304 {
1305 /* For memory above 1MB we need to set up a special segment to
1306 be able to access that memory. */
1307 int sel = __dpmi_allocate_ldt_descriptors (1);
1308
1309 if (sel <= 0)
1310 retval = 0;
1311 else
1312 {
1313 int access_rights = __dpmi_get_descriptor_access_rights (sel);
1314 size_t segment_limit = len - 1;
1315
1316 /* Make sure the crucial bits in the descriptor access
1317 rights are set correctly. Some DPMI providers might barf
1318 if we set the segment limit to something that is not an
1319 integral multiple of 4KB pages if the granularity bit is
1320 not set to byte-granular, even though the DPMI spec says
1321 it's the host's responsibility to set that bit correctly. */
1322 if (len > 1024 * 1024)
1323 {
1324 access_rights |= 0x8000;
1325 /* Page-granular segments should have the low 12 bits of
1326 the limit set. */
1327 segment_limit |= 0xfff;
1328 }
1329 else
1330 access_rights &= ~0x8000;
1331
1332 if (__dpmi_set_segment_base_address (sel, addr) != -1
1333 && __dpmi_set_descriptor_access_rights (sel, access_rights) != -1
1334 && __dpmi_set_segment_limit (sel, segment_limit) != -1
1335 /* W2K silently fails to set the segment limit, leaving
1336 it at zero; this test avoids the resulting crash. */
1337 && __dpmi_get_segment_limit (sel) >= segment_limit)
1338 movedata (sel, 0, _my_ds (), (unsigned)dest, len);
1339 else
1340 retval = 0;
1341
1342 __dpmi_free_ldt_descriptor (sel);
1343 }
1344 }
1345 return retval;
1346 }
1347
1348 /* Get a segment descriptor stored at index IDX in the descriptor
1349 table whose base address is TABLE_BASE. Return the descriptor
1350 type, or -1 if failure. */
1351 static int
1352 get_descriptor (unsigned long table_base, int idx, void *descr)
1353 {
1354 unsigned long addr = table_base + idx * 8; /* 8 bytes per entry */
1355
1356 if (read_memory_region (addr, descr, 8))
1357 return (int)((struct seg_descr *)descr)->stype;
1358 return -1;
1359 }
1360
1361 struct dtr_reg {
1362 unsigned short limit __attribute__((packed));
1363 unsigned long base __attribute__((packed));
1364 };
1365
1366 /* Display a segment descriptor stored at index IDX in a descriptor
1367 table whose type is TYPE and whose base address is BASE_ADDR. If
1368 FORCE is non-zero, display even invalid descriptors. */
1369 static void
1370 display_descriptor (unsigned type, unsigned long base_addr, int idx, int force)
1371 {
1372 struct seg_descr descr;
1373 struct gate_descr gate;
1374
1375 /* Get the descriptor from the table. */
1376 if (idx == 0 && type == 0)
1377 puts_filtered ("0x000: null descriptor\n");
1378 else if (get_descriptor (base_addr, idx, &descr) != -1)
1379 {
1380 /* For each type of descriptor table, this has a bit set if the
1381 corresponding type of selectors is valid in that table. */
1382 static unsigned allowed_descriptors[] = {
1383 0xffffdafeL, /* GDT */
1384 0x0000c0e0L, /* IDT */
1385 0xffffdafaL /* LDT */
1386 };
1387
1388 /* If the program hasn't started yet, assume the debuggee will
1389 have the same CPL as the debugger. */
1390 int cpl = prog_has_started ? (a_tss.tss_cs & 3) : _my_cs () & 3;
1391 unsigned long limit = (descr.limit1 << 16) | descr.limit0;
1392
1393 if (descr.present
1394 && (allowed_descriptors[type] & (1 << descr.stype)) != 0)
1395 {
1396 printf_filtered ("0x%03x: ",
1397 type == 1
1398 ? idx : (idx * 8) | (type ? (cpl | 4) : 0));
1399 if (descr.page_granular)
1400 limit = (limit << 12) | 0xfff; /* big segment: low 12 bit set */
1401 if (descr.stype == 1 || descr.stype == 2 || descr.stype == 3
1402 || descr.stype == 9 || descr.stype == 11
1403 || (descr.stype >= 16 && descr.stype < 32))
1404 printf_filtered ("base=0x%02x%02x%04x limit=0x%08lx",
1405 descr.base2, descr.base1, descr.base0, limit);
1406
1407 switch (descr.stype)
1408 {
1409 case 1:
1410 case 3:
1411 printf_filtered (" 16-bit TSS (task %sactive)",
1412 descr.stype == 3 ? "" : "in");
1413 break;
1414 case 2:
1415 puts_filtered (" LDT");
1416 break;
1417 case 4:
1418 memcpy (&gate, &descr, sizeof gate);
1419 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1420 gate.selector, gate.offset1, gate.offset0);
1421 printf_filtered (" 16-bit Call Gate (params=%d)",
1422 gate.param_count);
1423 break;
1424 case 5:
1425 printf_filtered ("TSS selector=0x%04x", descr.base0);
1426 printfi_filtered (16, "Task Gate");
1427 break;
1428 case 6:
1429 case 7:
1430 memcpy (&gate, &descr, sizeof gate);
1431 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1432 gate.selector, gate.offset1, gate.offset0);
1433 printf_filtered (" 16-bit %s Gate",
1434 descr.stype == 6 ? "Interrupt" : "Trap");
1435 break;
1436 case 9:
1437 case 11:
1438 printf_filtered (" 32-bit TSS (task %sactive)",
1439 descr.stype == 3 ? "" : "in");
1440 break;
1441 case 12:
1442 memcpy (&gate, &descr, sizeof gate);
1443 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1444 gate.selector, gate.offset1, gate.offset0);
1445 printf_filtered (" 32-bit Call Gate (params=%d)",
1446 gate.param_count);
1447 break;
1448 case 14:
1449 case 15:
1450 memcpy (&gate, &descr, sizeof gate);
1451 printf_filtered ("selector=0x%04x offs=0x%04x%04x",
1452 gate.selector, gate.offset1, gate.offset0);
1453 printf_filtered (" 32-bit %s Gate",
1454 descr.stype == 14 ? "Interrupt" : "Trap");
1455 break;
1456 case 16: /* data segments */
1457 case 17:
1458 case 18:
1459 case 19:
1460 case 20:
1461 case 21:
1462 case 22:
1463 case 23:
1464 printf_filtered (" %s-bit Data (%s Exp-%s%s)",
1465 descr.bit32 ? "32" : "16",
1466 descr.stype & 2 ? "Read/Write," : "Read-Only, ",
1467 descr.stype & 4 ? "down" : "up",
1468 descr.stype & 1 ? "" : ", N.Acc");
1469 break;
1470 case 24: /* code segments */
1471 case 25:
1472 case 26:
1473 case 27:
1474 case 28:
1475 case 29:
1476 case 30:
1477 case 31:
1478 printf_filtered (" %s-bit Code (%s, %sConf%s)",
1479 descr.bit32 ? "32" : "16",
1480 descr.stype & 2 ? "Exec/Read" : "Exec-Only",
1481 descr.stype & 4 ? "" : "N.",
1482 descr.stype & 1 ? "" : ", N.Acc");
1483 break;
1484 default:
1485 printf_filtered ("Unknown type 0x%02x", descr.stype);
1486 break;
1487 }
1488 puts_filtered ("\n");
1489 }
1490 else if (force)
1491 {
1492 printf_filtered ("0x%03x: ",
1493 type == 1
1494 ? idx : (idx * 8) | (type ? (cpl | 4) : 0));
1495 if (!descr.present)
1496 puts_filtered ("Segment not present\n");
1497 else
1498 printf_filtered ("Segment type 0x%02x is invalid in this table\n",
1499 descr.stype);
1500 }
1501 }
1502 else if (force)
1503 printf_filtered ("0x%03x: Cannot read this descriptor\n", idx);
1504 }
1505
1506 static void
1507 go32_sldt (char *arg, int from_tty)
1508 {
1509 struct dtr_reg gdtr;
1510 unsigned short ldtr = 0;
1511 int ldt_idx;
1512 struct seg_descr ldt_descr;
1513 long ldt_entry = -1L;
1514 int cpl = (prog_has_started ? a_tss.tss_cs : _my_cs ()) & 3;
1515
1516 if (arg && *arg)
1517 {
1518 while (*arg && isspace(*arg))
1519 arg++;
1520
1521 if (*arg)
1522 {
1523 ldt_entry = parse_and_eval_long (arg);
1524 if (ldt_entry < 0
1525 || (ldt_entry & 4) == 0
1526 || (ldt_entry & 3) != (cpl & 3))
1527 error ("Invalid LDT entry 0x%03x.", ldt_entry);
1528 }
1529 }
1530
1531 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1532 __asm__ __volatile__ ("sldt %0" : "=m" (ldtr) : /* no inputs */ );
1533 ldt_idx = ldtr / 8;
1534 if (ldt_idx == 0)
1535 puts_filtered ("There is no LDT.\n");
1536 /* LDT's entry in the GDT must have the type LDT, which is 2. */
1537 else if (get_descriptor (gdtr.base, ldt_idx, &ldt_descr) != 2)
1538 printf_filtered ("LDT is present (at %#x), but unreadable by GDB.\n",
1539 ldt_descr.base0
1540 | (ldt_descr.base1 << 16)
1541 | (ldt_descr.base2 << 24));
1542 else
1543 {
1544 unsigned base =
1545 ldt_descr.base0
1546 | (ldt_descr.base1 << 16)
1547 | (ldt_descr.base2 << 24);
1548 unsigned limit = ldt_descr.limit0 | (ldt_descr.limit1 << 16);
1549 int max_entry;
1550
1551 if (ldt_descr.page_granular)
1552 /* Page-granular segments must have the low 12 bits of their
1553 limit set. */
1554 limit = (limit << 12) | 0xfff;
1555 /* LDT cannot have more than 8K 8-byte entries, i.e. more than
1556 64KB. */
1557 if (limit > 0xffff)
1558 limit = 0xffff;
1559
1560 max_entry = (limit + 1) / 8;
1561
1562 if (ldt_entry >= 0)
1563 {
1564 if (ldt_entry > limit)
1565 error ("Invalid LDT entry %#x: outside valid limits [0..%#x]",
1566 ldt_entry, limit);
1567
1568 display_descriptor (ldt_descr.stype, base, ldt_entry / 8, 1);
1569 }
1570 else
1571 {
1572 int i;
1573
1574 for (i = 0; i < max_entry; i++)
1575 display_descriptor (ldt_descr.stype, base, i, 0);
1576 }
1577 }
1578 }
1579
1580 static void
1581 go32_sgdt (char *arg, int from_tty)
1582 {
1583 struct dtr_reg gdtr;
1584 long gdt_entry = -1L;
1585 int max_entry;
1586
1587 if (arg && *arg)
1588 {
1589 while (*arg && isspace(*arg))
1590 arg++;
1591
1592 if (*arg)
1593 {
1594 gdt_entry = parse_and_eval_long (arg);
1595 if (gdt_entry < 0 || (gdt_entry & 7) != 0)
1596 error ("Invalid GDT entry 0x%03x: not an integral multiple of 8.",
1597 gdt_entry);
1598 }
1599 }
1600
1601 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1602 max_entry = (gdtr.limit + 1) / 8;
1603
1604 if (gdt_entry >= 0)
1605 {
1606 if (gdt_entry > gdtr.limit)
1607 error ("Invalid GDT entry %#x: outside valid limits [0..%#x]",
1608 gdt_entry, gdtr.limit);
1609
1610 display_descriptor (0, gdtr.base, gdt_entry / 8, 1);
1611 }
1612 else
1613 {
1614 int i;
1615
1616 for (i = 0; i < max_entry; i++)
1617 display_descriptor (0, gdtr.base, i, 0);
1618 }
1619 }
1620
1621 static void
1622 go32_sidt (char *arg, int from_tty)
1623 {
1624 struct dtr_reg idtr;
1625 long idt_entry = -1L;
1626 int max_entry;
1627
1628 if (arg && *arg)
1629 {
1630 while (*arg && isspace(*arg))
1631 arg++;
1632
1633 if (*arg)
1634 {
1635 idt_entry = parse_and_eval_long (arg);
1636 if (idt_entry < 0)
1637 error ("Invalid (negative) IDT entry %d.", idt_entry);
1638 }
1639 }
1640
1641 __asm__ __volatile__ ("sidt %0" : "=m" (idtr) : /* no inputs */ );
1642 max_entry = (idtr.limit + 1) / 8;
1643 if (max_entry > 0x100) /* no more than 256 entries */
1644 max_entry = 0x100;
1645
1646 if (idt_entry >= 0)
1647 {
1648 if (idt_entry > idtr.limit)
1649 error ("Invalid IDT entry %#x: outside valid limits [0..%#x]",
1650 idt_entry, idtr.limit);
1651
1652 display_descriptor (1, idtr.base, idt_entry, 1);
1653 }
1654 else
1655 {
1656 int i;
1657
1658 for (i = 0; i < max_entry; i++)
1659 display_descriptor (1, idtr.base, i, 0);
1660 }
1661 }
1662
1663 /* Cached linear address of the base of the page directory. For
1664 now, available only under CWSDPMI. Code based on ideas and
1665 suggestions from Charles Sandmann <sandmann@clio.rice.edu>. */
1666 static unsigned long pdbr;
1667
1668 static unsigned long
1669 get_cr3 (void)
1670 {
1671 unsigned offset;
1672 unsigned taskreg;
1673 unsigned long taskbase, cr3;
1674 struct dtr_reg gdtr;
1675
1676 if (pdbr > 0 && pdbr <= 0xfffff)
1677 return pdbr;
1678
1679 /* Get the linear address of GDT and the Task Register. */
1680 __asm__ __volatile__ ("sgdt %0" : "=m" (gdtr) : /* no inputs */ );
1681 __asm__ __volatile__ ("str %0" : "=m" (taskreg) : /* no inputs */ );
1682
1683 /* Task Register is a segment selector for the TSS of the current
1684 task. Therefore, it can be used as an index into the GDT to get
1685 at the segment descriptor for the TSS. To get the index, reset
1686 the low 3 bits of the selector (which give the CPL). Add 2 to the
1687 offset to point to the 3 low bytes of the base address. */
1688 offset = gdtr.base + (taskreg & 0xfff8) + 2;
1689
1690
1691 /* CWSDPMI's task base is always under the 1MB mark. */
1692 if (offset > 0xfffff)
1693 return 0;
1694
1695 _farsetsel (_dos_ds);
1696 taskbase = _farnspeekl (offset) & 0xffffffU;
1697 taskbase += _farnspeekl (offset + 2) & 0xff000000U;
1698 if (taskbase > 0xfffff)
1699 return 0;
1700
1701 /* CR3 (a.k.a. PDBR, the Page Directory Base Register) is stored at
1702 offset 1Ch in the TSS. */
1703 cr3 = _farnspeekl (taskbase + 0x1c) & ~0xfff;
1704 if (cr3 > 0xfffff)
1705 {
1706 /* The Page Directory is in UMBs. In that case, CWSDPMI puts
1707 the first Page Table right below the Page Directory. Thus,
1708 the first Page Table's entry for its own address and the Page
1709 Directory entry for that Page Table will hold the same
1710 physical address. The loop below searches the entire UMB
1711 range of addresses for such an occurence. */
1712 unsigned long addr, pte_idx;
1713
1714 for (addr = 0xb0000, pte_idx = 0xb0;
1715 pte_idx < 0xff;
1716 addr += 0x1000, pte_idx++)
1717 {
1718 if (((_farnspeekl (addr + 4 * pte_idx) & 0xfffff027) ==
1719 (_farnspeekl (addr + 0x1000) & 0xfffff027))
1720 && ((_farnspeekl (addr + 4 * pte_idx + 4) & 0xfffff000) == cr3))
1721 {
1722 cr3 = addr + 0x1000;
1723 break;
1724 }
1725 }
1726
1727 if (cr3 > 0xfffff)
1728 cr3 = 0;
1729 }
1730
1731 return cr3;
1732 }
1733
1734 /* Return the N'th Page Directory entry. */
1735 static unsigned long
1736 get_pde (int n)
1737 {
1738 unsigned long pde = 0;
1739
1740 if (pdbr && n >= 0 && n < 1024)
1741 {
1742 pde = _farpeekl (_dos_ds, pdbr + 4*n);
1743 }
1744 return pde;
1745 }
1746
1747 /* Return the N'th entry of the Page Table whose Page Directory entry
1748 is PDE. */
1749 static unsigned long
1750 get_pte (unsigned long pde, int n)
1751 {
1752 unsigned long pte = 0;
1753
1754 /* pde & 0x80 tests the 4MB page bit. We don't support 4MB
1755 page tables, for now. */
1756 if ((pde & 1) && !(pde & 0x80) && n >= 0 && n < 1024)
1757 {
1758 pde &= ~0xfff; /* clear non-address bits */
1759 pte = _farpeekl (_dos_ds, pde + 4*n);
1760 }
1761 return pte;
1762 }
1763
1764 /* Display a Page Directory or Page Table entry. IS_DIR, if non-zero,
1765 says this is a Page Directory entry. If FORCE is non-zero, display
1766 the entry even if its Present flag is off. OFF is the offset of the
1767 address from the page's base address. */
1768 static void
1769 display_ptable_entry (unsigned long entry, int is_dir, int force, unsigned off)
1770 {
1771 if ((entry & 1) != 0)
1772 {
1773 printf_filtered ("Base=0x%05lx000", entry >> 12);
1774 if ((entry & 0x100) && !is_dir)
1775 puts_filtered (" Global");
1776 if ((entry & 0x40) && !is_dir)
1777 puts_filtered (" Dirty");
1778 printf_filtered (" %sAcc.", (entry & 0x20) ? "" : "Not-");
1779 printf_filtered (" %sCached", (entry & 0x10) ? "" : "Not-");
1780 printf_filtered (" Write-%s", (entry & 8) ? "Thru" : "Back");
1781 printf_filtered (" %s", (entry & 4) ? "Usr" : "Sup");
1782 printf_filtered (" Read-%s", (entry & 2) ? "Write" : "Only");
1783 if (off)
1784 printf_filtered (" +0x%x", off);
1785 puts_filtered ("\n");
1786 }
1787 else if (force)
1788 printf_filtered ("Page%s not present or not supported; value=0x%lx.\n",
1789 is_dir ? " Table" : "", entry >> 1);
1790 }
1791
1792 static void
1793 go32_pde (char *arg, int from_tty)
1794 {
1795 long pde_idx = -1, i;
1796
1797 if (arg && *arg)
1798 {
1799 while (*arg && isspace(*arg))
1800 arg++;
1801
1802 if (*arg)
1803 {
1804 pde_idx = parse_and_eval_long (arg);
1805 if (pde_idx < 0 || pde_idx >= 1024)
1806 error ("Entry %ld is outside valid limits [0..1023].", pde_idx);
1807 }
1808 }
1809
1810 pdbr = get_cr3 ();
1811 if (!pdbr)
1812 puts_filtered ("Access to Page Directories is not supported on this system.\n");
1813 else if (pde_idx >= 0)
1814 display_ptable_entry (get_pde (pde_idx), 1, 1, 0);
1815 else
1816 for (i = 0; i < 1024; i++)
1817 display_ptable_entry (get_pde (i), 1, 0, 0);
1818 }
1819
1820 /* A helper function to display entries in a Page Table pointed to by
1821 the N'th entry in the Page Directory. If FORCE is non-zero, say
1822 something even if the Page Table is not accessible. */
1823 static void
1824 display_page_table (long n, int force)
1825 {
1826 unsigned long pde = get_pde (n);
1827
1828 if ((pde & 1) != 0)
1829 {
1830 int i;
1831
1832 printf_filtered ("Page Table pointed to by Page Directory entry 0x%lx:\n", n);
1833 for (i = 0; i < 1024; i++)
1834 display_ptable_entry (get_pte (pde, i), 0, 0, 0);
1835 puts_filtered ("\n");
1836 }
1837 else if (force)
1838 printf_filtered ("Page Table not present; value=0x%lx.\n", pde >> 1);
1839 }
1840
1841 static void
1842 go32_pte (char *arg, int from_tty)
1843 {
1844 long pde_idx = -1, i;
1845
1846 if (arg && *arg)
1847 {
1848 while (*arg && isspace(*arg))
1849 arg++;
1850
1851 if (*arg)
1852 {
1853 pde_idx = parse_and_eval_long (arg);
1854 if (pde_idx < 0 || pde_idx >= 1024)
1855 error ("Entry %d is outside valid limits [0..1023].", pde_idx);
1856 }
1857 }
1858
1859 pdbr = get_cr3 ();
1860 if (!pdbr)
1861 puts_filtered ("Access to Page Tables is not supported on this system.\n");
1862 else if (pde_idx >= 0)
1863 display_page_table (pde_idx, 1);
1864 else
1865 for (i = 0; i < 1024; i++)
1866 display_page_table (i, 0);
1867 }
1868
1869 static void
1870 go32_pte_for_address (char *arg, int from_tty)
1871 {
1872 CORE_ADDR addr = 0, i;
1873
1874 if (arg && *arg)
1875 {
1876 while (*arg && isspace(*arg))
1877 arg++;
1878
1879 if (*arg)
1880 addr = parse_and_eval_address (arg);
1881 }
1882 if (!addr)
1883 error_no_arg ("linear address");
1884
1885 pdbr = get_cr3 ();
1886 if (!pdbr)
1887 puts_filtered ("Access to Page Tables is not supported on this system.\n");
1888 else
1889 {
1890 int pde_idx = (addr >> 22) & 0x3ff;
1891 int pte_idx = (addr >> 12) & 0x3ff;
1892 unsigned offs = addr & 0xfff;
1893
1894 printf_filtered ("Page Table entry for address 0x%llx:\n",
1895 (unsigned long long)addr);
1896 display_ptable_entry (get_pte (get_pde (pde_idx), pte_idx), 0, 1, offs);
1897 }
1898 }
1899
1900 static struct cmd_list_element *info_dos_cmdlist = NULL;
1901
1902 static void
1903 go32_info_dos_command (char *args, int from_tty)
1904 {
1905 help_list (info_dos_cmdlist, "info dos ", class_info, gdb_stdout);
1906 }
1907
1908 void
1909 _initialize_go32_nat (void)
1910 {
1911 init_go32_ops ();
1912 add_target (&go32_ops);
1913
1914 add_prefix_cmd ("dos", class_info, go32_info_dos_command,
1915 "Print information specific to DJGPP (a.k.a. MS-DOS) debugging.",
1916 &info_dos_cmdlist, "info dos ", 0, &infolist);
1917
1918 add_cmd ("sysinfo", class_info, go32_sysinfo,
1919 "Display information about the target system, including CPU, OS, DPMI, etc.",
1920 &info_dos_cmdlist);
1921 add_cmd ("ldt", class_info, go32_sldt,
1922 "Display entries in the LDT (Local Descriptor Table).\n"
1923 "Entry number (an expression) as an argument means display only that entry.",
1924 &info_dos_cmdlist);
1925 add_cmd ("gdt", class_info, go32_sgdt,
1926 "Display entries in the GDT (Global Descriptor Table).\n"
1927 "Entry number (an expression) as an argument means display only that entry.",
1928 &info_dos_cmdlist);
1929 add_cmd ("idt", class_info, go32_sidt,
1930 "Display entries in the IDT (Interrupt Descriptor Table).\n"
1931 "Entry number (an expression) as an argument means display only that entry.",
1932 &info_dos_cmdlist);
1933 add_cmd ("pde", class_info, go32_pde,
1934 "Display entries in the Page Directory.\n"
1935 "Entry number (an expression) as an argument means display only that entry.",
1936 &info_dos_cmdlist);
1937 add_cmd ("pte", class_info, go32_pte,
1938 "Display entries in Page Tables.\n"
1939 "Entry number (an expression) as an argument means display only entries\n"
1940 "from the Page Table pointed to by the specified Page Directory entry.",
1941 &info_dos_cmdlist);
1942 add_cmd ("address-pte", class_info, go32_pte_for_address,
1943 "Display a Page Table entry for a linear address.\n"
1944 "The address argument must be a linear address, after adding to\n"
1945 "it the base address of the appropriate segment.\n"
1946 "The base address of variables and functions in the debuggee's data\n"
1947 "or code segment is stored in the variable __djgpp_base_address,\n"
1948 "so use `__djgpp_base_address + (char *)&var' as the argument.\n"
1949 "For other segments, look up their base address in the output of\n"
1950 "the `info dos ldt' command.",
1951 &info_dos_cmdlist);
1952 }
1953
1954 pid_t
1955 tcgetpgrp (int fd)
1956 {
1957 if (isatty (fd))
1958 return SOME_PID;
1959 errno = ENOTTY;
1960 return -1;
1961 }
1962
1963 int
1964 tcsetpgrp (int fd, pid_t pgid)
1965 {
1966 if (isatty (fd) && pgid == SOME_PID)
1967 return 0;
1968 errno = pgid == SOME_PID ? ENOTTY : ENOSYS;
1969 return -1;
1970 }
This page took 0.07055 seconds and 4 git commands to generate.