1 /* Target-dependent code for the HP PA architecture, for GDB.
2 Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1994, 1995
3 Free Software Foundation, Inc.
5 Contributed by the Center for Software Science at the
6 University of Utah (pa-gdb-bugs@cs.utah.edu).
8 This file is part of GDB.
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
29 /* For argument passing to the inferior */
33 #include <sys/types.h>
36 #include <sys/param.h>
39 #ifdef COFF_ENCAPSULATE
40 #include "a.out.encap.h"
44 #define N_SET_MAGIC(exec, val) ((exec).a_magic = (val))
47 /*#include <sys/user.h> After a.out.h */
58 static int restore_pc_queue
PARAMS ((struct frame_saved_regs
*));
60 static int hppa_alignof
PARAMS ((struct type
*));
62 CORE_ADDR frame_saved_pc
PARAMS ((struct frame_info
*));
64 static int prologue_inst_adjust_sp
PARAMS ((unsigned long));
66 static int is_branch
PARAMS ((unsigned long));
68 static int inst_saves_gr
PARAMS ((unsigned long));
70 static int inst_saves_fr
PARAMS ((unsigned long));
72 static int pc_in_interrupt_handler
PARAMS ((CORE_ADDR
));
74 static int pc_in_linker_stub
PARAMS ((CORE_ADDR
));
76 static int compare_unwind_entries
PARAMS ((const struct unwind_table_entry
*,
77 const struct unwind_table_entry
*));
79 static void read_unwind_info
PARAMS ((struct objfile
*));
81 static void internalize_unwinds
PARAMS ((struct objfile
*,
82 struct unwind_table_entry
*,
83 asection
*, unsigned int,
84 unsigned int, CORE_ADDR
));
85 static void pa_print_registers
PARAMS ((char *, int, int));
86 static void pa_print_fp_reg
PARAMS ((int));
89 /* Routines to extract various sized constants out of hppa
92 /* This assumes that no garbage lies outside of the lower bits of
96 sign_extend (val
, bits
)
99 return (int)(val
>> bits
- 1 ? (-1 << bits
) | val
: val
);
102 /* For many immediate values the sign bit is the low bit! */
105 low_sign_extend (val
, bits
)
108 return (int)((val
& 0x1 ? (-1 << (bits
- 1)) : 0) | val
>> 1);
110 /* extract the immediate field from a ld{bhw}s instruction */
113 get_field (val
, from
, to
)
114 unsigned val
, from
, to
;
116 val
= val
>> 31 - to
;
117 return val
& ((1 << 32 - from
) - 1);
121 set_field (val
, from
, to
, new_val
)
122 unsigned *val
, from
, to
;
124 unsigned mask
= ~((1 << (to
- from
+ 1)) << (31 - from
));
125 return *val
= *val
& mask
| (new_val
<< (31 - from
));
128 /* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
133 return GET_FIELD (word
, 18, 18) << 2 | GET_FIELD (word
, 16, 17);
136 extract_5_load (word
)
139 return low_sign_extend (word
>> 16 & MASK_5
, 5);
142 /* extract the immediate field from a st{bhw}s instruction */
145 extract_5_store (word
)
148 return low_sign_extend (word
& MASK_5
, 5);
151 /* extract the immediate field from a break instruction */
154 extract_5r_store (word
)
157 return (word
& MASK_5
);
160 /* extract the immediate field from a {sr}sm instruction */
163 extract_5R_store (word
)
166 return (word
>> 16 & MASK_5
);
169 /* extract an 11 bit immediate field */
175 return low_sign_extend (word
& MASK_11
, 11);
178 /* extract a 14 bit immediate field */
184 return low_sign_extend (word
& MASK_14
, 14);
187 /* deposit a 14 bit constant in a word */
190 deposit_14 (opnd
, word
)
194 unsigned sign
= (opnd
< 0 ? 1 : 0);
196 return word
| ((unsigned)opnd
<< 1 & MASK_14
) | sign
;
199 /* extract a 21 bit constant */
209 val
= GET_FIELD (word
, 20, 20);
211 val
|= GET_FIELD (word
, 9, 19);
213 val
|= GET_FIELD (word
, 5, 6);
215 val
|= GET_FIELD (word
, 0, 4);
217 val
|= GET_FIELD (word
, 7, 8);
218 return sign_extend (val
, 21) << 11;
221 /* deposit a 21 bit constant in a word. Although 21 bit constants are
222 usually the top 21 bits of a 32 bit constant, we assume that only
223 the low 21 bits of opnd are relevant */
226 deposit_21 (opnd
, word
)
231 val
|= GET_FIELD (opnd
, 11 + 14, 11 + 18);
233 val
|= GET_FIELD (opnd
, 11 + 12, 11 + 13);
235 val
|= GET_FIELD (opnd
, 11 + 19, 11 + 20);
237 val
|= GET_FIELD (opnd
, 11 + 1, 11 + 11);
239 val
|= GET_FIELD (opnd
, 11 + 0, 11 + 0);
243 /* extract a 12 bit constant from branch instructions */
249 return sign_extend (GET_FIELD (word
, 19, 28) |
250 GET_FIELD (word
, 29, 29) << 10 |
251 (word
& 0x1) << 11, 12) << 2;
254 /* Deposit a 17 bit constant in an instruction (like bl). */
257 deposit_17 (opnd
, word
)
260 word
|= GET_FIELD (opnd
, 15 + 0, 15 + 0); /* w */
261 word
|= GET_FIELD (opnd
, 15 + 1, 15 + 5) << 16; /* w1 */
262 word
|= GET_FIELD (opnd
, 15 + 6, 15 + 6) << 2; /* w2[10] */
263 word
|= GET_FIELD (opnd
, 15 + 7, 15 + 16) << 3; /* w2[0..9] */
268 /* extract a 17 bit constant from branch instructions, returning the
269 19 bit signed value. */
275 return sign_extend (GET_FIELD (word
, 19, 28) |
276 GET_FIELD (word
, 29, 29) << 10 |
277 GET_FIELD (word
, 11, 15) << 11 |
278 (word
& 0x1) << 16, 17) << 2;
282 /* Compare the start address for two unwind entries returning 1 if
283 the first address is larger than the second, -1 if the second is
284 larger than the first, and zero if they are equal. */
287 compare_unwind_entries (a
, b
)
288 const struct unwind_table_entry
*a
;
289 const struct unwind_table_entry
*b
;
291 if (a
->region_start
> b
->region_start
)
293 else if (a
->region_start
< b
->region_start
)
300 internalize_unwinds (objfile
, table
, section
, entries
, size
, text_offset
)
301 struct objfile
*objfile
;
302 struct unwind_table_entry
*table
;
304 unsigned int entries
, size
;
305 CORE_ADDR text_offset
;
307 /* We will read the unwind entries into temporary memory, then
308 fill in the actual unwind table. */
313 char *buf
= alloca (size
);
315 bfd_get_section_contents (objfile
->obfd
, section
, buf
, 0, size
);
317 /* Now internalize the information being careful to handle host/target
319 for (i
= 0; i
< entries
; i
++)
321 table
[i
].region_start
= bfd_get_32 (objfile
->obfd
,
323 table
[i
].region_start
+= text_offset
;
325 table
[i
].region_end
= bfd_get_32 (objfile
->obfd
, (bfd_byte
*)buf
);
326 table
[i
].region_end
+= text_offset
;
328 tmp
= bfd_get_32 (objfile
->obfd
, (bfd_byte
*)buf
);
330 table
[i
].Cannot_unwind
= (tmp
>> 31) & 0x1;
331 table
[i
].Millicode
= (tmp
>> 30) & 0x1;
332 table
[i
].Millicode_save_sr0
= (tmp
>> 29) & 0x1;
333 table
[i
].Region_description
= (tmp
>> 27) & 0x3;
334 table
[i
].reserved1
= (tmp
>> 26) & 0x1;
335 table
[i
].Entry_SR
= (tmp
>> 25) & 0x1;
336 table
[i
].Entry_FR
= (tmp
>> 21) & 0xf;
337 table
[i
].Entry_GR
= (tmp
>> 16) & 0x1f;
338 table
[i
].Args_stored
= (tmp
>> 15) & 0x1;
339 table
[i
].Variable_Frame
= (tmp
>> 14) & 0x1;
340 table
[i
].Separate_Package_Body
= (tmp
>> 13) & 0x1;
341 table
[i
].Frame_Extension_Millicode
= (tmp
>> 12 ) & 0x1;
342 table
[i
].Stack_Overflow_Check
= (tmp
>> 11) & 0x1;
343 table
[i
].Two_Instruction_SP_Increment
= (tmp
>> 10) & 0x1;
344 table
[i
].Ada_Region
= (tmp
>> 9) & 0x1;
345 table
[i
].reserved2
= (tmp
>> 5) & 0xf;
346 table
[i
].Save_SP
= (tmp
>> 4) & 0x1;
347 table
[i
].Save_RP
= (tmp
>> 3) & 0x1;
348 table
[i
].Save_MRP_in_frame
= (tmp
>> 2) & 0x1;
349 table
[i
].extn_ptr_defined
= (tmp
>> 1) & 0x1;
350 table
[i
].Cleanup_defined
= tmp
& 0x1;
351 tmp
= bfd_get_32 (objfile
->obfd
, (bfd_byte
*)buf
);
353 table
[i
].MPE_XL_interrupt_marker
= (tmp
>> 31) & 0x1;
354 table
[i
].HP_UX_interrupt_marker
= (tmp
>> 30) & 0x1;
355 table
[i
].Large_frame
= (tmp
>> 29) & 0x1;
356 table
[i
].reserved4
= (tmp
>> 27) & 0x3;
357 table
[i
].Total_frame_size
= tmp
& 0x7ffffff;
362 /* Read in the backtrace information stored in the `$UNWIND_START$' section of
363 the object file. This info is used mainly by find_unwind_entry() to find
364 out the stack frame size and frame pointer used by procedures. We put
365 everything on the psymbol obstack in the objfile so that it automatically
366 gets freed when the objfile is destroyed. */
369 read_unwind_info (objfile
)
370 struct objfile
*objfile
;
372 asection
*unwind_sec
, *elf_unwind_sec
, *stub_unwind_sec
;
373 unsigned unwind_size
, elf_unwind_size
, stub_unwind_size
, total_size
;
374 unsigned index
, unwind_entries
, elf_unwind_entries
;
375 unsigned stub_entries
, total_entries
;
376 CORE_ADDR text_offset
;
377 struct obj_unwind_info
*ui
;
379 text_offset
= ANOFFSET (objfile
->section_offsets
, 0);
380 ui
= (struct obj_unwind_info
*)obstack_alloc (&objfile
->psymbol_obstack
,
381 sizeof (struct obj_unwind_info
));
387 /* Get hooks to all unwind sections. Note there is no linker-stub unwind
388 section in ELF at the moment. */
389 unwind_sec
= bfd_get_section_by_name (objfile
->obfd
, "$UNWIND_START$");
390 elf_unwind_sec
= bfd_get_section_by_name (objfile
->obfd
, ".PARISC.unwind");
391 stub_unwind_sec
= bfd_get_section_by_name (objfile
->obfd
, "$UNWIND_END$");
393 /* Get sizes and unwind counts for all sections. */
396 unwind_size
= bfd_section_size (objfile
->obfd
, unwind_sec
);
397 unwind_entries
= unwind_size
/ UNWIND_ENTRY_SIZE
;
407 elf_unwind_size
= bfd_section_size (objfile
->obfd
, elf_unwind_sec
);
408 elf_unwind_entries
= elf_unwind_size
/ UNWIND_ENTRY_SIZE
;
413 elf_unwind_entries
= 0;
418 stub_unwind_size
= bfd_section_size (objfile
->obfd
, stub_unwind_sec
);
419 stub_entries
= stub_unwind_size
/ STUB_UNWIND_ENTRY_SIZE
;
423 stub_unwind_size
= 0;
427 /* Compute total number of unwind entries and their total size. */
428 total_entries
= unwind_entries
+ elf_unwind_entries
+ stub_entries
;
429 total_size
= total_entries
* sizeof (struct unwind_table_entry
);
431 /* Allocate memory for the unwind table. */
432 ui
->table
= obstack_alloc (&objfile
->psymbol_obstack
, total_size
);
433 ui
->last
= total_entries
- 1;
435 /* Internalize the standard unwind entries. */
437 internalize_unwinds (objfile
, &ui
->table
[index
], unwind_sec
,
438 unwind_entries
, unwind_size
, text_offset
);
439 index
+= unwind_entries
;
440 internalize_unwinds (objfile
, &ui
->table
[index
], elf_unwind_sec
,
441 elf_unwind_entries
, elf_unwind_size
, text_offset
);
442 index
+= elf_unwind_entries
;
444 /* Now internalize the stub unwind entries. */
445 if (stub_unwind_size
> 0)
448 char *buf
= alloca (stub_unwind_size
);
450 /* Read in the stub unwind entries. */
451 bfd_get_section_contents (objfile
->obfd
, stub_unwind_sec
, buf
,
452 0, stub_unwind_size
);
454 /* Now convert them into regular unwind entries. */
455 for (i
= 0; i
< stub_entries
; i
++, index
++)
457 /* Clear out the next unwind entry. */
458 memset (&ui
->table
[index
], 0, sizeof (struct unwind_table_entry
));
460 /* Convert offset & size into region_start and region_end.
461 Stuff away the stub type into "reserved" fields. */
462 ui
->table
[index
].region_start
= bfd_get_32 (objfile
->obfd
,
464 ui
->table
[index
].region_start
+= text_offset
;
466 ui
->table
[index
].stub_type
= bfd_get_8 (objfile
->obfd
,
469 ui
->table
[index
].region_end
470 = ui
->table
[index
].region_start
+ 4 *
471 (bfd_get_16 (objfile
->obfd
, (bfd_byte
*) buf
) - 1);
477 /* Unwind table needs to be kept sorted. */
478 qsort (ui
->table
, total_entries
, sizeof (struct unwind_table_entry
),
479 compare_unwind_entries
);
481 /* Keep a pointer to the unwind information. */
482 objfile
->obj_private
= (PTR
) ui
;
485 /* Lookup the unwind (stack backtrace) info for the given PC. We search all
486 of the objfiles seeking the unwind table entry for this PC. Each objfile
487 contains a sorted list of struct unwind_table_entry. Since we do a binary
488 search of the unwind tables, we depend upon them to be sorted. */
490 static struct unwind_table_entry
*
491 find_unwind_entry(pc
)
494 int first
, middle
, last
;
495 struct objfile
*objfile
;
497 ALL_OBJFILES (objfile
)
499 struct obj_unwind_info
*ui
;
501 ui
= OBJ_UNWIND_INFO (objfile
);
505 read_unwind_info (objfile
);
506 ui
= OBJ_UNWIND_INFO (objfile
);
509 /* First, check the cache */
512 && pc
>= ui
->cache
->region_start
513 && pc
<= ui
->cache
->region_end
)
516 /* Not in the cache, do a binary search */
521 while (first
<= last
)
523 middle
= (first
+ last
) / 2;
524 if (pc
>= ui
->table
[middle
].region_start
525 && pc
<= ui
->table
[middle
].region_end
)
527 ui
->cache
= &ui
->table
[middle
];
528 return &ui
->table
[middle
];
531 if (pc
< ui
->table
[middle
].region_start
)
536 } /* ALL_OBJFILES() */
540 /* Return the adjustment necessary to make for addresses on the stack
541 as presented by hpread.c.
543 This is necessary because of the stack direction on the PA and the
544 bizarre way in which someone (?) decided they wanted to handle
545 frame pointerless code in GDB. */
547 hpread_adjust_stack_address (func_addr
)
550 struct unwind_table_entry
*u
;
552 u
= find_unwind_entry (func_addr
);
556 return u
->Total_frame_size
<< 3;
559 /* Called to determine if PC is in an interrupt handler of some
563 pc_in_interrupt_handler (pc
)
566 struct unwind_table_entry
*u
;
567 struct minimal_symbol
*msym_us
;
569 u
= find_unwind_entry (pc
);
573 /* Oh joys. HPUX sets the interrupt bit for _sigreturn even though
574 its frame isn't a pure interrupt frame. Deal with this. */
575 msym_us
= lookup_minimal_symbol_by_pc (pc
);
577 return u
->HP_UX_interrupt_marker
&& !IN_SIGTRAMP (pc
, SYMBOL_NAME (msym_us
));
580 /* Called when no unwind descriptor was found for PC. Returns 1 if it
581 appears that PC is in a linker stub. */
584 pc_in_linker_stub (pc
)
587 int found_magic_instruction
= 0;
591 /* If unable to read memory, assume pc is not in a linker stub. */
592 if (target_read_memory (pc
, buf
, 4) != 0)
595 /* We are looking for something like
597 ; $$dyncall jams RP into this special spot in the frame (RP')
598 ; before calling the "call stub"
601 ldsid (rp),r1 ; Get space associated with RP into r1
602 mtsp r1,sp ; Move it into space register 0
603 be,n 0(sr0),rp) ; back to your regularly scheduled program
606 /* Maximum known linker stub size is 4 instructions. Search forward
607 from the given PC, then backward. */
608 for (i
= 0; i
< 4; i
++)
610 /* If we hit something with an unwind, stop searching this direction. */
612 if (find_unwind_entry (pc
+ i
* 4) != 0)
615 /* Check for ldsid (rp),r1 which is the magic instruction for a
616 return from a cross-space function call. */
617 if (read_memory_integer (pc
+ i
* 4, 4) == 0x004010a1)
619 found_magic_instruction
= 1;
622 /* Add code to handle long call/branch and argument relocation stubs
626 if (found_magic_instruction
!= 0)
629 /* Now look backward. */
630 for (i
= 0; i
< 4; i
++)
632 /* If we hit something with an unwind, stop searching this direction. */
634 if (find_unwind_entry (pc
- i
* 4) != 0)
637 /* Check for ldsid (rp),r1 which is the magic instruction for a
638 return from a cross-space function call. */
639 if (read_memory_integer (pc
- i
* 4, 4) == 0x004010a1)
641 found_magic_instruction
= 1;
644 /* Add code to handle long call/branch and argument relocation stubs
647 return found_magic_instruction
;
651 find_return_regnum(pc
)
654 struct unwind_table_entry
*u
;
656 u
= find_unwind_entry (pc
);
667 /* Return size of frame, or -1 if we should use a frame pointer. */
669 find_proc_framesize (pc
)
672 struct unwind_table_entry
*u
;
673 struct minimal_symbol
*msym_us
;
675 u
= find_unwind_entry (pc
);
679 if (pc_in_linker_stub (pc
))
680 /* Linker stubs have a zero size frame. */
686 msym_us
= lookup_minimal_symbol_by_pc (pc
);
688 /* If Save_SP is set, and we're not in an interrupt or signal caller,
689 then we have a frame pointer. Use it. */
690 if (u
->Save_SP
&& !pc_in_interrupt_handler (pc
)
691 && !IN_SIGTRAMP (pc
, SYMBOL_NAME (msym_us
)))
694 return u
->Total_frame_size
<< 3;
697 /* Return offset from sp at which rp is saved, or 0 if not saved. */
698 static int rp_saved
PARAMS ((CORE_ADDR
));
704 struct unwind_table_entry
*u
;
706 u
= find_unwind_entry (pc
);
710 if (pc_in_linker_stub (pc
))
711 /* This is the so-called RP'. */
719 else if (u
->stub_type
!= 0)
721 switch (u
->stub_type
)
726 case PARAMETER_RELOCATION
:
737 frameless_function_invocation (frame
)
738 struct frame_info
*frame
;
740 struct unwind_table_entry
*u
;
742 u
= find_unwind_entry (frame
->pc
);
747 return (u
->Total_frame_size
== 0 && u
->stub_type
== 0);
751 saved_pc_after_call (frame
)
752 struct frame_info
*frame
;
756 struct unwind_table_entry
*u
;
758 ret_regnum
= find_return_regnum (get_frame_pc (frame
));
759 pc
= read_register (ret_regnum
) & ~0x3;
761 /* If PC is in a linker stub, then we need to dig the address
762 the stub will return to out of the stack. */
763 u
= find_unwind_entry (pc
);
764 if (u
&& u
->stub_type
!= 0)
765 return frame_saved_pc (frame
);
771 frame_saved_pc (frame
)
772 struct frame_info
*frame
;
774 CORE_ADDR pc
= get_frame_pc (frame
);
775 struct unwind_table_entry
*u
;
777 /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
778 at the base of the frame in an interrupt handler. Registers within
779 are saved in the exact same order as GDB numbers registers. How
781 if (pc_in_interrupt_handler (pc
))
782 return read_memory_integer (frame
->frame
+ PC_REGNUM
* 4, 4) & ~0x3;
784 #ifdef FRAME_SAVED_PC_IN_SIGTRAMP
785 /* Deal with signal handler caller frames too. */
786 if (frame
->signal_handler_caller
)
789 FRAME_SAVED_PC_IN_SIGTRAMP (frame
, &rp
);
794 if (frameless_function_invocation (frame
))
798 ret_regnum
= find_return_regnum (pc
);
800 /* If the next frame is an interrupt frame or a signal
801 handler caller, then we need to look in the saved
802 register area to get the return pointer (the values
803 in the registers may not correspond to anything useful). */
805 && (frame
->next
->signal_handler_caller
806 || pc_in_interrupt_handler (frame
->next
->pc
)))
808 struct frame_saved_regs saved_regs
;
810 get_frame_saved_regs (frame
->next
, &saved_regs
);
811 if (read_memory_integer (saved_regs
.regs
[FLAGS_REGNUM
], 4) & 0x2)
813 pc
= read_memory_integer (saved_regs
.regs
[31], 4) & ~0x3;
815 /* Syscalls are really two frames. The syscall stub itself
816 with a return pointer in %rp and the kernel call with
817 a return pointer in %r31. We return the %rp variant
818 if %r31 is the same as frame->pc. */
820 pc
= read_memory_integer (saved_regs
.regs
[RP_REGNUM
], 4) & ~0x3;
823 pc
= read_memory_integer (saved_regs
.regs
[RP_REGNUM
], 4) & ~0x3;
826 pc
= read_register (ret_regnum
) & ~0x3;
833 rp_offset
= rp_saved (pc
);
834 /* Similar to code in frameless function case. If the next
835 frame is a signal or interrupt handler, then dig the right
836 information out of the saved register info. */
839 && (frame
->next
->signal_handler_caller
840 || pc_in_interrupt_handler (frame
->next
->pc
)))
842 struct frame_saved_regs saved_regs
;
844 get_frame_saved_regs (frame
->next
, &saved_regs
);
845 if (read_memory_integer (saved_regs
.regs
[FLAGS_REGNUM
], 4) & 0x2)
847 pc
= read_memory_integer (saved_regs
.regs
[31], 4) & ~0x3;
849 /* Syscalls are really two frames. The syscall stub itself
850 with a return pointer in %rp and the kernel call with
851 a return pointer in %r31. We return the %rp variant
852 if %r31 is the same as frame->pc. */
854 pc
= read_memory_integer (saved_regs
.regs
[RP_REGNUM
], 4) & ~0x3;
857 pc
= read_memory_integer (saved_regs
.regs
[RP_REGNUM
], 4) & ~0x3;
859 else if (rp_offset
== 0)
860 pc
= read_register (RP_REGNUM
) & ~0x3;
862 pc
= read_memory_integer (frame
->frame
+ rp_offset
, 4) & ~0x3;
865 /* If PC is inside a linker stub, then dig out the address the stub
867 u
= find_unwind_entry (pc
);
868 if (u
&& u
->stub_type
!= 0)
872 /* If this is a dynamic executable, and we're in a signal handler,
873 then the call chain will eventually point us into the stub for
874 _sigreturn. Unlike most cases, we'll be pointed to the branch
875 to the real sigreturn rather than the code after the real branch!.
877 Else, try to dig the address the stub will return to in the normal
879 insn
= read_memory_integer (pc
, 4);
880 if ((insn
& 0xfc00e000) == 0xe8000000)
881 return (pc
+ extract_17 (insn
) + 8) & ~0x3;
889 /* We need to correct the PC and the FP for the outermost frame when we are
893 init_extra_frame_info (fromleaf
, frame
)
895 struct frame_info
*frame
;
900 if (frame
->next
&& !fromleaf
)
903 /* If the next frame represents a frameless function invocation
904 then we have to do some adjustments that are normally done by
905 FRAME_CHAIN. (FRAME_CHAIN is not called in this case.) */
908 /* Find the framesize of *this* frame without peeking at the PC
909 in the current frame structure (it isn't set yet). */
910 framesize
= find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame
)));
912 /* Now adjust our base frame accordingly. If we have a frame pointer
913 use it, else subtract the size of this frame from the current
914 frame. (we always want frame->frame to point at the lowest address
917 frame
->frame
= read_register (FP_REGNUM
);
919 frame
->frame
-= framesize
;
923 flags
= read_register (FLAGS_REGNUM
);
924 if (flags
& 2) /* In system call? */
925 frame
->pc
= read_register (31) & ~0x3;
927 /* The outermost frame is always derived from PC-framesize
929 One might think frameless innermost frames should have
930 a frame->frame that is the same as the parent's frame->frame.
931 That is wrong; frame->frame in that case should be the *high*
932 address of the parent's frame. It's complicated as hell to
933 explain, but the parent *always* creates some stack space for
934 the child. So the child actually does have a frame of some
935 sorts, and its base is the high address in its parent's frame. */
936 framesize
= find_proc_framesize(frame
->pc
);
938 frame
->frame
= read_register (FP_REGNUM
);
940 frame
->frame
= read_register (SP_REGNUM
) - framesize
;
943 /* Given a GDB frame, determine the address of the calling function's frame.
944 This will be used to create a new GDB frame struct, and then
945 INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
947 This may involve searching through prologues for several functions
948 at boundaries where GCC calls HP C code, or where code which has
949 a frame pointer calls code without a frame pointer. */
953 struct frame_info
*frame
;
955 int my_framesize
, caller_framesize
;
956 struct unwind_table_entry
*u
;
957 CORE_ADDR frame_base
;
958 struct frame_info
*tmp_frame
;
960 /* Handle HPUX, BSD, and OSF1 style interrupt frames first. These
961 are easy; at *sp we have a full save state strucutre which we can
962 pull the old stack pointer from. Also see frame_saved_pc for
963 code to dig a saved PC out of the save state structure. */
964 if (pc_in_interrupt_handler (frame
->pc
))
965 frame_base
= read_memory_integer (frame
->frame
+ SP_REGNUM
* 4, 4);
966 #ifdef FRAME_BASE_BEFORE_SIGTRAMP
967 else if (frame
->signal_handler_caller
)
969 FRAME_BASE_BEFORE_SIGTRAMP (frame
, &frame_base
);
973 frame_base
= frame
->frame
;
975 /* Get frame sizes for the current frame and the frame of the
977 my_framesize
= find_proc_framesize (frame
->pc
);
978 caller_framesize
= find_proc_framesize (FRAME_SAVED_PC(frame
));
980 /* If caller does not have a frame pointer, then its frame
981 can be found at current_frame - caller_framesize. */
982 if (caller_framesize
!= -1)
983 return frame_base
- caller_framesize
;
985 /* Both caller and callee have frame pointers and are GCC compiled
986 (SAVE_SP bit in unwind descriptor is on for both functions.
987 The previous frame pointer is found at the top of the current frame. */
988 if (caller_framesize
== -1 && my_framesize
== -1)
989 return read_memory_integer (frame_base
, 4);
991 /* Caller has a frame pointer, but callee does not. This is a little
992 more difficult as GCC and HP C lay out locals and callee register save
993 areas very differently.
995 The previous frame pointer could be in a register, or in one of
996 several areas on the stack.
998 Walk from the current frame to the innermost frame examining
999 unwind descriptors to determine if %r3 ever gets saved into the
1000 stack. If so return whatever value got saved into the stack.
1001 If it was never saved in the stack, then the value in %r3 is still
1004 We use information from unwind descriptors to determine if %r3
1005 is saved into the stack (Entry_GR field has this information). */
1010 u
= find_unwind_entry (tmp_frame
->pc
);
1014 /* We could find this information by examining prologues. I don't
1015 think anyone has actually written any tools (not even "strip")
1016 which leave them out of an executable, so maybe this is a moot
1018 warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame
->pc
);
1022 /* Entry_GR specifies the number of callee-saved general registers
1023 saved in the stack. It starts at %r3, so %r3 would be 1. */
1024 if (u
->Entry_GR
>= 1 || u
->Save_SP
1025 || tmp_frame
->signal_handler_caller
1026 || pc_in_interrupt_handler (tmp_frame
->pc
))
1029 tmp_frame
= tmp_frame
->next
;
1034 /* We may have walked down the chain into a function with a frame
1037 && !tmp_frame
->signal_handler_caller
1038 && !pc_in_interrupt_handler (tmp_frame
->pc
))
1039 return read_memory_integer (tmp_frame
->frame
, 4);
1040 /* %r3 was saved somewhere in the stack. Dig it out. */
1043 struct frame_saved_regs saved_regs
;
1047 For optimization purposes many kernels don't have the
1048 callee saved registers into the save_state structure upon
1049 entry into the kernel for a syscall; the optimization
1050 is usually turned off if the process is being traced so
1051 that the debugger can get full register state for the
1054 This scheme works well except for two cases:
1056 * Attaching to a process when the process is in the
1057 kernel performing a system call (debugger can't get
1058 full register state for the inferior process since
1059 the process wasn't being traced when it entered the
1062 * Register state is not complete if the system call
1063 causes the process to core dump.
1066 The following heinous code is an attempt to deal with
1067 the lack of register state in a core dump. It will
1068 fail miserably if the function which performs the
1069 system call has a variable sized stack frame. */
1071 get_frame_saved_regs (tmp_frame
, &saved_regs
);
1073 /* Abominable hack. */
1074 if (current_target
.to_has_execution
== 0
1075 && saved_regs
.regs
[FLAGS_REGNUM
]
1076 && (read_memory_integer (saved_regs
.regs
[FLAGS_REGNUM
], 4) & 0x2))
1078 u
= find_unwind_entry (FRAME_SAVED_PC (frame
));
1080 return read_memory_integer (saved_regs
.regs
[FP_REGNUM
], 4);
1082 return frame_base
- (u
->Total_frame_size
<< 3);
1085 return read_memory_integer (saved_regs
.regs
[FP_REGNUM
], 4);
1090 /* The value in %r3 was never saved into the stack (thus %r3 still
1091 holds the value of the previous frame pointer). */
1092 return read_register (FP_REGNUM
);
1097 /* To see if a frame chain is valid, see if the caller looks like it
1098 was compiled with gcc. */
1101 frame_chain_valid (chain
, thisframe
)
1103 struct frame_info
*thisframe
;
1105 struct minimal_symbol
*msym_us
;
1106 struct minimal_symbol
*msym_start
;
1107 struct unwind_table_entry
*u
, *next_u
= NULL
;
1108 struct frame_info
*next
;
1113 u
= find_unwind_entry (thisframe
->pc
);
1118 /* We can't just check that the same of msym_us is "_start", because
1119 someone idiotically decided that they were going to make a Ltext_end
1120 symbol with the same address. This Ltext_end symbol is totally
1121 indistinguishable (as nearly as I can tell) from the symbol for a function
1122 which is (legitimately, since it is in the user's namespace)
1123 named Ltext_end, so we can't just ignore it. */
1124 msym_us
= lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe
));
1125 msym_start
= lookup_minimal_symbol ("_start", NULL
, NULL
);
1128 && SYMBOL_VALUE_ADDRESS (msym_us
) == SYMBOL_VALUE_ADDRESS (msym_start
))
1131 next
= get_next_frame (thisframe
);
1133 next_u
= find_unwind_entry (next
->pc
);
1135 /* If this frame does not save SP, has no stack, isn't a stub,
1136 and doesn't "call" an interrupt routine or signal handler caller,
1137 then its not valid. */
1138 if (u
->Save_SP
|| u
->Total_frame_size
|| u
->stub_type
!= 0
1139 || (thisframe
->next
&& thisframe
->next
->signal_handler_caller
)
1140 || (next_u
&& next_u
->HP_UX_interrupt_marker
))
1143 if (pc_in_linker_stub (thisframe
->pc
))
1150 * These functions deal with saving and restoring register state
1151 * around a function call in the inferior. They keep the stack
1152 * double-word aligned; eventually, on an hp700, the stack will have
1153 * to be aligned to a 64-byte boundary.
1157 push_dummy_frame (inf_status
)
1158 struct inferior_status
*inf_status
;
1160 CORE_ADDR sp
, pc
, pcspace
;
1161 register int regnum
;
1165 /* Oh, what a hack. If we're trying to perform an inferior call
1166 while the inferior is asleep, we have to make sure to clear
1167 the "in system call" bit in the flag register (the call will
1168 start after the syscall returns, so we're no longer in the system
1169 call!) This state is kept in "inf_status", change it there.
1171 We also need a number of horrid hacks to deal with lossage in the
1172 PC queue registers (apparently they're not valid when the in syscall
1174 pc
= target_read_pc (inferior_pid
);
1175 int_buffer
= read_register (FLAGS_REGNUM
);
1176 if (int_buffer
& 0x2)
1180 memcpy (inf_status
->registers
, &int_buffer
, 4);
1181 memcpy (inf_status
->registers
+ REGISTER_BYTE (PCOQ_HEAD_REGNUM
), &pc
, 4);
1183 memcpy (inf_status
->registers
+ REGISTER_BYTE (PCOQ_TAIL_REGNUM
), &pc
, 4);
1185 sid
= (pc
>> 30) & 0x3;
1187 pcspace
= read_register (SR4_REGNUM
);
1189 pcspace
= read_register (SR4_REGNUM
+ 4 + sid
);
1190 memcpy (inf_status
->registers
+ REGISTER_BYTE (PCSQ_HEAD_REGNUM
),
1192 memcpy (inf_status
->registers
+ REGISTER_BYTE (PCSQ_TAIL_REGNUM
),
1196 pcspace
= read_register (PCSQ_HEAD_REGNUM
);
1198 /* Space for "arguments"; the RP goes in here. */
1199 sp
= read_register (SP_REGNUM
) + 48;
1200 int_buffer
= read_register (RP_REGNUM
) | 0x3;
1201 write_memory (sp
- 20, (char *)&int_buffer
, 4);
1203 int_buffer
= read_register (FP_REGNUM
);
1204 write_memory (sp
, (char *)&int_buffer
, 4);
1206 write_register (FP_REGNUM
, sp
);
1210 for (regnum
= 1; regnum
< 32; regnum
++)
1211 if (regnum
!= RP_REGNUM
&& regnum
!= FP_REGNUM
)
1212 sp
= push_word (sp
, read_register (regnum
));
1216 for (regnum
= FP0_REGNUM
; regnum
< NUM_REGS
; regnum
++)
1218 read_register_bytes (REGISTER_BYTE (regnum
), (char *)&freg_buffer
, 8);
1219 sp
= push_bytes (sp
, (char *)&freg_buffer
, 8);
1221 sp
= push_word (sp
, read_register (IPSW_REGNUM
));
1222 sp
= push_word (sp
, read_register (SAR_REGNUM
));
1223 sp
= push_word (sp
, pc
);
1224 sp
= push_word (sp
, pcspace
);
1225 sp
= push_word (sp
, pc
+ 4);
1226 sp
= push_word (sp
, pcspace
);
1227 write_register (SP_REGNUM
, sp
);
1231 find_dummy_frame_regs (frame
, frame_saved_regs
)
1232 struct frame_info
*frame
;
1233 struct frame_saved_regs
*frame_saved_regs
;
1235 CORE_ADDR fp
= frame
->frame
;
1238 frame_saved_regs
->regs
[RP_REGNUM
] = fp
- 20 & ~0x3;
1239 frame_saved_regs
->regs
[FP_REGNUM
] = fp
;
1240 frame_saved_regs
->regs
[1] = fp
+ 8;
1242 for (fp
+= 12, i
= 3; i
< 32; i
++)
1246 frame_saved_regs
->regs
[i
] = fp
;
1252 for (i
= FP0_REGNUM
; i
< NUM_REGS
; i
++, fp
+= 8)
1253 frame_saved_regs
->regs
[i
] = fp
;
1255 frame_saved_regs
->regs
[IPSW_REGNUM
] = fp
;
1256 frame_saved_regs
->regs
[SAR_REGNUM
] = fp
+ 4;
1257 frame_saved_regs
->regs
[PCOQ_HEAD_REGNUM
] = fp
+ 8;
1258 frame_saved_regs
->regs
[PCSQ_HEAD_REGNUM
] = fp
+ 12;
1259 frame_saved_regs
->regs
[PCOQ_TAIL_REGNUM
] = fp
+ 16;
1260 frame_saved_regs
->regs
[PCSQ_TAIL_REGNUM
] = fp
+ 20;
1266 register struct frame_info
*frame
= get_current_frame ();
1267 register CORE_ADDR fp
, npc
, target_pc
;
1268 register int regnum
;
1269 struct frame_saved_regs fsr
;
1272 fp
= FRAME_FP (frame
);
1273 get_frame_saved_regs (frame
, &fsr
);
1275 #ifndef NO_PC_SPACE_QUEUE_RESTORE
1276 if (fsr
.regs
[IPSW_REGNUM
]) /* Restoring a call dummy frame */
1277 restore_pc_queue (&fsr
);
1280 for (regnum
= 31; regnum
> 0; regnum
--)
1281 if (fsr
.regs
[regnum
])
1282 write_register (regnum
, read_memory_integer (fsr
.regs
[regnum
], 4));
1284 for (regnum
= NUM_REGS
- 1; regnum
>= FP0_REGNUM
; regnum
--)
1285 if (fsr
.regs
[regnum
])
1287 read_memory (fsr
.regs
[regnum
], (char *)&freg_buffer
, 8);
1288 write_register_bytes (REGISTER_BYTE (regnum
), (char *)&freg_buffer
, 8);
1291 if (fsr
.regs
[IPSW_REGNUM
])
1292 write_register (IPSW_REGNUM
,
1293 read_memory_integer (fsr
.regs
[IPSW_REGNUM
], 4));
1295 if (fsr
.regs
[SAR_REGNUM
])
1296 write_register (SAR_REGNUM
,
1297 read_memory_integer (fsr
.regs
[SAR_REGNUM
], 4));
1299 /* If the PC was explicitly saved, then just restore it. */
1300 if (fsr
.regs
[PCOQ_TAIL_REGNUM
])
1302 npc
= read_memory_integer (fsr
.regs
[PCOQ_TAIL_REGNUM
], 4);
1303 write_register (PCOQ_TAIL_REGNUM
, npc
);
1305 /* Else use the value in %rp to set the new PC. */
1308 npc
= read_register (RP_REGNUM
);
1309 target_write_pc (npc
, 0);
1312 write_register (FP_REGNUM
, read_memory_integer (fp
, 4));
1314 if (fsr
.regs
[IPSW_REGNUM
]) /* call dummy */
1315 write_register (SP_REGNUM
, fp
- 48);
1317 write_register (SP_REGNUM
, fp
);
1319 /* The PC we just restored may be inside a return trampoline. If so
1320 we want to restart the inferior and run it through the trampoline.
1322 Do this by setting a momentary breakpoint at the location the
1323 trampoline returns to.
1325 Don't skip through the trampoline if we're popping a dummy frame. */
1326 target_pc
= SKIP_TRAMPOLINE_CODE (npc
& ~0x3) & ~0x3;
1327 if (target_pc
&& !fsr
.regs
[IPSW_REGNUM
])
1329 struct symtab_and_line sal
;
1330 struct breakpoint
*breakpoint
;
1331 struct cleanup
*old_chain
;
1333 /* Set up our breakpoint. Set it to be silent as the MI code
1334 for "return_command" will print the frame we returned to. */
1335 sal
= find_pc_line (target_pc
, 0);
1337 breakpoint
= set_momentary_breakpoint (sal
, NULL
, bp_finish
);
1338 breakpoint
->silent
= 1;
1340 /* So we can clean things up. */
1341 old_chain
= make_cleanup (delete_breakpoint
, breakpoint
);
1343 /* Start up the inferior. */
1344 proceed_to_finish
= 1;
1345 proceed ((CORE_ADDR
) -1, TARGET_SIGNAL_DEFAULT
, 0);
1347 /* Perform our cleanups. */
1348 do_cleanups (old_chain
);
1350 flush_cached_frames ();
1354 * After returning to a dummy on the stack, restore the instruction
1355 * queue space registers. */
1358 restore_pc_queue (fsr
)
1359 struct frame_saved_regs
*fsr
;
1361 CORE_ADDR pc
= read_pc ();
1362 CORE_ADDR new_pc
= read_memory_integer (fsr
->regs
[PCOQ_HEAD_REGNUM
], 4);
1363 struct target_waitstatus w
;
1366 /* Advance past break instruction in the call dummy. */
1367 write_register (PCOQ_HEAD_REGNUM
, pc
+ 4);
1368 write_register (PCOQ_TAIL_REGNUM
, pc
+ 8);
1371 * HPUX doesn't let us set the space registers or the space
1372 * registers of the PC queue through ptrace. Boo, hiss.
1373 * Conveniently, the call dummy has this sequence of instructions
1378 * So, load up the registers and single step until we are in the
1382 write_register (21, read_memory_integer (fsr
->regs
[PCSQ_HEAD_REGNUM
], 4));
1383 write_register (22, new_pc
);
1385 for (insn_count
= 0; insn_count
< 3; insn_count
++)
1387 /* FIXME: What if the inferior gets a signal right now? Want to
1388 merge this into wait_for_inferior (as a special kind of
1389 watchpoint? By setting a breakpoint at the end? Is there
1390 any other choice? Is there *any* way to do this stuff with
1391 ptrace() or some equivalent?). */
1393 target_wait (inferior_pid
, &w
);
1395 if (w
.kind
== TARGET_WAITKIND_SIGNALLED
)
1397 stop_signal
= w
.value
.sig
;
1398 terminal_ours_for_output ();
1399 printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
1400 target_signal_to_name (stop_signal
),
1401 target_signal_to_string (stop_signal
));
1402 gdb_flush (gdb_stdout
);
1406 target_terminal_ours ();
1407 target_fetch_registers (-1);
1412 hppa_push_arguments (nargs
, args
, sp
, struct_return
, struct_addr
)
1417 CORE_ADDR struct_addr
;
1419 /* array of arguments' offsets */
1420 int *offset
= (int *)alloca(nargs
* sizeof (int));
1424 for (i
= 0; i
< nargs
; i
++)
1426 cum
+= TYPE_LENGTH (VALUE_TYPE (args
[i
]));
1428 /* value must go at proper alignment. Assume alignment is a
1430 alignment
= hppa_alignof (VALUE_TYPE (args
[i
]));
1431 if (cum
% alignment
)
1432 cum
= (cum
+ alignment
) & -alignment
;
1435 sp
+= max ((cum
+ 7) & -8, 16);
1437 for (i
= 0; i
< nargs
; i
++)
1438 write_memory (sp
+ offset
[i
], VALUE_CONTENTS (args
[i
]),
1439 TYPE_LENGTH (VALUE_TYPE (args
[i
])));
1442 write_register (28, struct_addr
);
1447 * Insert the specified number of args and function address
1448 * into a call sequence of the above form stored at DUMMYNAME.
1450 * On the hppa we need to call the stack dummy through $$dyncall.
1451 * Therefore our version of FIX_CALL_DUMMY takes an extra argument,
1452 * real_pc, which is the location where gdb should start up the
1453 * inferior to do the function call.
1457 hppa_fix_call_dummy (dummy
, pc
, fun
, nargs
, args
, type
, gcc_p
)
1466 CORE_ADDR dyncall_addr
;
1467 struct minimal_symbol
*msymbol
;
1468 int flags
= read_register (FLAGS_REGNUM
);
1469 struct unwind_table_entry
*u
;
1471 msymbol
= lookup_minimal_symbol ("$$dyncall", NULL
, NULL
);
1472 if (msymbol
== NULL
)
1473 error ("Can't find an address for $$dyncall trampoline");
1475 dyncall_addr
= SYMBOL_VALUE_ADDRESS (msymbol
);
1477 /* FUN could be a procedure label, in which case we have to get
1478 its real address and the value of its GOT/DP. */
1481 /* Get the GOT/DP value for the target function. It's
1482 at *(fun+4). Note the call dummy is *NOT* allowed to
1483 trash %r19 before calling the target function. */
1484 write_register (19, read_memory_integer ((fun
& ~0x3) + 4, 4));
1486 /* Now get the real address for the function we are calling, it's
1488 fun
= (CORE_ADDR
) read_memory_integer (fun
& ~0x3, 4);
1493 #ifndef GDB_TARGET_IS_PA_ELF
1494 /* FUN could be either an export stub, or the real address of a
1495 function in a shared library. We must call an import stub
1496 rather than the export stub or real function for lazy binding
1497 to work correctly. */
1498 if (som_solib_get_got_by_pc (fun
))
1500 struct objfile
*objfile
;
1501 struct minimal_symbol
*funsymbol
, *stub_symbol
;
1502 CORE_ADDR newfun
= 0;
1504 funsymbol
= lookup_minimal_symbol_by_pc (fun
);
1506 error ("Unable to find minimal symbol for target fucntion.\n");
1508 /* Search all the object files for an import symbol with the
1510 ALL_OBJFILES (objfile
)
1512 stub_symbol
= lookup_minimal_symbol (SYMBOL_NAME (funsymbol
),
1514 /* Found a symbol with the right name. */
1517 struct unwind_table_entry
*u
;
1518 /* It must be a shared library trampoline. */
1519 if (SYMBOL_TYPE (stub_symbol
) != mst_solib_trampoline
)
1522 /* It must also be an import stub. */
1523 u
= find_unwind_entry (SYMBOL_VALUE (stub_symbol
));
1524 if (!u
|| u
->stub_type
!= IMPORT
)
1527 /* OK. Looks like the correct import stub. */
1528 newfun
= SYMBOL_VALUE (stub_symbol
);
1533 write_register (19, som_solib_get_got_by_pc (fun
));
1538 /* If we are calling an import stub (eg calling into a dynamic library)
1539 then have sr4export call the magic __d_plt_call routine which is linked
1540 in from end.o. (You can't use _sr4export to call the import stub as
1541 the value in sp-24 will get fried and you end up returning to the
1542 wrong location. You can't call the import stub directly as the code
1543 to bind the PLT entry to a function can't return to a stack address.) */
1544 u
= find_unwind_entry (fun
);
1545 if (u
&& u
->stub_type
== IMPORT
)
1548 msymbol
= lookup_minimal_symbol ("__d_plt_call", NULL
, NULL
);
1549 if (msymbol
== NULL
)
1550 msymbol
= lookup_minimal_symbol ("__gcc_plt_call", NULL
, NULL
);
1552 if (msymbol
== NULL
)
1553 error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline");
1555 /* This is where sr4export will jump to. */
1556 new_fun
= SYMBOL_VALUE_ADDRESS (msymbol
);
1558 if (strcmp (SYMBOL_NAME (msymbol
), "__d_plt_call"))
1559 write_register (22, fun
);
1562 /* We have to store the address of the stub in __shlib_funcptr. */
1563 msymbol
= lookup_minimal_symbol ("__shlib_funcptr", NULL
,
1564 (struct objfile
*)NULL
);
1565 if (msymbol
== NULL
)
1566 error ("Can't find an address for __shlib_funcptr");
1568 target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol
), (char *)&fun
, 4);
1573 /* Store upper 21 bits of function address into ldil */
1575 store_unsigned_integer
1576 (&dummy
[FUNC_LDIL_OFFSET
],
1578 deposit_21 (fun
>> 11,
1579 extract_unsigned_integer (&dummy
[FUNC_LDIL_OFFSET
],
1580 INSTRUCTION_SIZE
)));
1582 /* Store lower 11 bits of function address into ldo */
1584 store_unsigned_integer
1585 (&dummy
[FUNC_LDO_OFFSET
],
1587 deposit_14 (fun
& MASK_11
,
1588 extract_unsigned_integer (&dummy
[FUNC_LDO_OFFSET
],
1589 INSTRUCTION_SIZE
)));
1590 #ifdef SR4EXPORT_LDIL_OFFSET
1593 CORE_ADDR sr4export_addr
;
1595 /* We still need sr4export's address too. */
1597 msymbol
= lookup_minimal_symbol ("_sr4export", NULL
, NULL
);
1598 if (msymbol
== NULL
)
1599 error ("Can't find an address for _sr4export trampoline");
1601 sr4export_addr
= SYMBOL_VALUE_ADDRESS (msymbol
);
1603 /* Store upper 21 bits of sr4export's address into ldil */
1605 store_unsigned_integer
1606 (&dummy
[SR4EXPORT_LDIL_OFFSET
],
1608 deposit_21 (sr4export_addr
>> 11,
1609 extract_unsigned_integer (&dummy
[SR4EXPORT_LDIL_OFFSET
],
1610 INSTRUCTION_SIZE
)));
1611 /* Store lower 11 bits of sr4export's address into ldo */
1613 store_unsigned_integer
1614 (&dummy
[SR4EXPORT_LDO_OFFSET
],
1616 deposit_14 (sr4export_addr
& MASK_11
,
1617 extract_unsigned_integer (&dummy
[SR4EXPORT_LDO_OFFSET
],
1618 INSTRUCTION_SIZE
)));
1622 write_register (22, pc
);
1624 /* If we are in a syscall, then we should call the stack dummy
1625 directly. $$dyncall is not needed as the kernel sets up the
1626 space id registers properly based on the value in %r31. In
1627 fact calling $$dyncall will not work because the value in %r22
1628 will be clobbered on the syscall exit path.
1630 Similarly if the current PC is in a shared library. Note however,
1631 this scheme won't work if the shared library isn't mapped into
1632 the same space as the stack. */
1635 #ifndef GDB_TARGET_IS_PA_ELF
1636 else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid
)))
1640 return dyncall_addr
;
1644 /* Get the PC from %r31 if currently in a syscall. Also mask out privilege
1648 target_read_pc (pid
)
1651 int flags
= read_register (FLAGS_REGNUM
);
1654 return read_register (31) & ~0x3;
1656 return read_register (PC_REGNUM
) & ~0x3;
1659 /* Write out the PC. If currently in a syscall, then also write the new
1660 PC value into %r31. */
1663 target_write_pc (v
, pid
)
1667 int flags
= read_register (FLAGS_REGNUM
);
1669 /* If in a syscall, then set %r31. Also make sure to get the
1670 privilege bits set correctly. */
1672 write_register (31, (long) (v
| 0x3));
1674 write_register (PC_REGNUM
, (long) v
);
1675 write_register (NPC_REGNUM
, (long) v
+ 4);
1678 /* return the alignment of a type in bytes. Structures have the maximum
1679 alignment required by their fields. */
1685 int max_align
, align
, i
;
1686 switch (TYPE_CODE (arg
))
1691 return TYPE_LENGTH (arg
);
1692 case TYPE_CODE_ARRAY
:
1693 return hppa_alignof (TYPE_FIELD_TYPE (arg
, 0));
1694 case TYPE_CODE_STRUCT
:
1695 case TYPE_CODE_UNION
:
1697 for (i
= 0; i
< TYPE_NFIELDS (arg
); i
++)
1699 /* Bit fields have no real alignment. */
1700 if (!TYPE_FIELD_BITPOS (arg
, i
))
1702 align
= hppa_alignof (TYPE_FIELD_TYPE (arg
, i
));
1703 max_align
= max (max_align
, align
);
1712 /* Print the register regnum, or all registers if regnum is -1 */
1715 pa_do_registers_info (regnum
, fpregs
)
1719 char raw_regs
[REGISTER_BYTES
];
1722 for (i
= 0; i
< NUM_REGS
; i
++)
1723 read_relative_register_raw_bytes (i
, raw_regs
+ REGISTER_BYTE (i
));
1725 pa_print_registers (raw_regs
, regnum
, fpregs
);
1726 else if (regnum
< FP0_REGNUM
)
1727 printf_unfiltered ("%s %x\n", reg_names
[regnum
], *(long *)(raw_regs
+
1728 REGISTER_BYTE (regnum
)));
1730 pa_print_fp_reg (regnum
);
1734 pa_print_registers (raw_regs
, regnum
, fpregs
)
1742 for (i
= 0; i
< 18; i
++)
1744 for (j
= 0; j
< 4; j
++)
1747 extract_signed_integer (raw_regs
+ REGISTER_BYTE (i
+(j
*18)), 4);
1748 printf_unfiltered ("%8.8s: %8x ", reg_names
[i
+(j
*18)], val
);
1750 printf_unfiltered ("\n");
1754 for (i
= 72; i
< NUM_REGS
; i
++)
1755 pa_print_fp_reg (i
);
1762 unsigned char raw_buffer
[MAX_REGISTER_RAW_SIZE
];
1763 unsigned char virtual_buffer
[MAX_REGISTER_VIRTUAL_SIZE
];
1765 /* Get 32bits of data. */
1766 read_relative_register_raw_bytes (i
, raw_buffer
);
1768 /* Put it in the buffer. No conversions are ever necessary. */
1769 memcpy (virtual_buffer
, raw_buffer
, REGISTER_RAW_SIZE (i
));
1771 fputs_filtered (reg_names
[i
], gdb_stdout
);
1772 print_spaces_filtered (8 - strlen (reg_names
[i
]), gdb_stdout
);
1773 fputs_filtered ("(single precision) ", gdb_stdout
);
1775 val_print (REGISTER_VIRTUAL_TYPE (i
), virtual_buffer
, 0, gdb_stdout
, 0,
1776 1, 0, Val_pretty_default
);
1777 printf_filtered ("\n");
1779 /* If "i" is even, then this register can also be a double-precision
1780 FP register. Dump it out as such. */
1783 /* Get the data in raw format for the 2nd half. */
1784 read_relative_register_raw_bytes (i
+ 1, raw_buffer
);
1786 /* Copy it into the appropriate part of the virtual buffer. */
1787 memcpy (virtual_buffer
+ REGISTER_RAW_SIZE (i
), raw_buffer
,
1788 REGISTER_RAW_SIZE (i
));
1790 /* Dump it as a double. */
1791 fputs_filtered (reg_names
[i
], gdb_stdout
);
1792 print_spaces_filtered (8 - strlen (reg_names
[i
]), gdb_stdout
);
1793 fputs_filtered ("(double precision) ", gdb_stdout
);
1795 val_print (builtin_type_double
, virtual_buffer
, 0, gdb_stdout
, 0,
1796 1, 0, Val_pretty_default
);
1797 printf_filtered ("\n");
1801 /* Return one if PC is in the call path of a trampoline, else return zero.
1803 Note we return one for *any* call trampoline (long-call, arg-reloc), not
1804 just shared library trampolines (import, export). */
1807 in_solib_call_trampoline (pc
, name
)
1811 struct minimal_symbol
*minsym
;
1812 struct unwind_table_entry
*u
;
1813 static CORE_ADDR dyncall
= 0;
1814 static CORE_ADDR sr4export
= 0;
1816 /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
1819 /* First see if PC is in one of the two C-library trampolines. */
1822 minsym
= lookup_minimal_symbol ("$$dyncall", NULL
, NULL
);
1824 dyncall
= SYMBOL_VALUE_ADDRESS (minsym
);
1831 minsym
= lookup_minimal_symbol ("_sr4export", NULL
, NULL
);
1833 sr4export
= SYMBOL_VALUE_ADDRESS (minsym
);
1838 if (pc
== dyncall
|| pc
== sr4export
)
1841 /* Get the unwind descriptor corresponding to PC, return zero
1842 if no unwind was found. */
1843 u
= find_unwind_entry (pc
);
1847 /* If this isn't a linker stub, then return now. */
1848 if (u
->stub_type
== 0)
1851 /* By definition a long-branch stub is a call stub. */
1852 if (u
->stub_type
== LONG_BRANCH
)
1855 /* The call and return path execute the same instructions within
1856 an IMPORT stub! So an IMPORT stub is both a call and return
1858 if (u
->stub_type
== IMPORT
)
1861 /* Parameter relocation stubs always have a call path and may have a
1863 if (u
->stub_type
== PARAMETER_RELOCATION
1864 || u
->stub_type
== EXPORT
)
1868 /* Search forward from the current PC until we hit a branch
1869 or the end of the stub. */
1870 for (addr
= pc
; addr
<= u
->region_end
; addr
+= 4)
1874 insn
= read_memory_integer (addr
, 4);
1876 /* Does it look like a bl? If so then it's the call path, if
1877 we find a bv or be first, then we're on the return path. */
1878 if ((insn
& 0xfc00e000) == 0xe8000000)
1880 else if ((insn
& 0xfc00e001) == 0xe800c000
1881 || (insn
& 0xfc000000) == 0xe0000000)
1885 /* Should never happen. */
1886 warning ("Unable to find branch in parameter relocation stub.\n");
1890 /* Unknown stub type. For now, just return zero. */
1894 /* Return one if PC is in the return path of a trampoline, else return zero.
1896 Note we return one for *any* call trampoline (long-call, arg-reloc), not
1897 just shared library trampolines (import, export). */
1900 in_solib_return_trampoline (pc
, name
)
1904 struct unwind_table_entry
*u
;
1906 /* Get the unwind descriptor corresponding to PC, return zero
1907 if no unwind was found. */
1908 u
= find_unwind_entry (pc
);
1912 /* If this isn't a linker stub or it's just a long branch stub, then
1914 if (u
->stub_type
== 0 || u
->stub_type
== LONG_BRANCH
)
1917 /* The call and return path execute the same instructions within
1918 an IMPORT stub! So an IMPORT stub is both a call and return
1920 if (u
->stub_type
== IMPORT
)
1923 /* Parameter relocation stubs always have a call path and may have a
1925 if (u
->stub_type
== PARAMETER_RELOCATION
1926 || u
->stub_type
== EXPORT
)
1930 /* Search forward from the current PC until we hit a branch
1931 or the end of the stub. */
1932 for (addr
= pc
; addr
<= u
->region_end
; addr
+= 4)
1936 insn
= read_memory_integer (addr
, 4);
1938 /* Does it look like a bl? If so then it's the call path, if
1939 we find a bv or be first, then we're on the return path. */
1940 if ((insn
& 0xfc00e000) == 0xe8000000)
1942 else if ((insn
& 0xfc00e001) == 0xe800c000
1943 || (insn
& 0xfc000000) == 0xe0000000)
1947 /* Should never happen. */
1948 warning ("Unable to find branch in parameter relocation stub.\n");
1952 /* Unknown stub type. For now, just return zero. */
1957 /* Figure out if PC is in a trampoline, and if so find out where
1958 the trampoline will jump to. If not in a trampoline, return zero.
1960 Simple code examination probably is not a good idea since the code
1961 sequences in trampolines can also appear in user code.
1963 We use unwinds and information from the minimal symbol table to
1964 determine when we're in a trampoline. This won't work for ELF
1965 (yet) since it doesn't create stub unwind entries. Whether or
1966 not ELF will create stub unwinds or normal unwinds for linker
1967 stubs is still being debated.
1969 This should handle simple calls through dyncall or sr4export,
1970 long calls, argument relocation stubs, and dyncall/sr4export
1971 calling an argument relocation stub. It even handles some stubs
1972 used in dynamic executables. */
1975 skip_trampoline_code (pc
, name
)
1980 long prev_inst
, curr_inst
, loc
;
1981 static CORE_ADDR dyncall
= 0;
1982 static CORE_ADDR sr4export
= 0;
1983 struct minimal_symbol
*msym
;
1984 struct unwind_table_entry
*u
;
1986 /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
1991 msym
= lookup_minimal_symbol ("$$dyncall", NULL
, NULL
);
1993 dyncall
= SYMBOL_VALUE_ADDRESS (msym
);
2000 msym
= lookup_minimal_symbol ("_sr4export", NULL
, NULL
);
2002 sr4export
= SYMBOL_VALUE_ADDRESS (msym
);
2007 /* Addresses passed to dyncall may *NOT* be the actual address
2008 of the function. So we may have to do something special. */
2011 pc
= (CORE_ADDR
) read_register (22);
2013 /* If bit 30 (counting from the left) is on, then pc is the address of
2014 the PLT entry for this function, not the address of the function
2015 itself. Bit 31 has meaning too, but only for MPE. */
2017 pc
= (CORE_ADDR
) read_memory_integer (pc
& ~0x3, 4);
2019 else if (pc
== sr4export
)
2020 pc
= (CORE_ADDR
) (read_register (22));
2022 /* Get the unwind descriptor corresponding to PC, return zero
2023 if no unwind was found. */
2024 u
= find_unwind_entry (pc
);
2028 /* If this isn't a linker stub, then return now. */
2029 if (u
->stub_type
== 0)
2030 return orig_pc
== pc
? 0 : pc
& ~0x3;
2032 /* It's a stub. Search for a branch and figure out where it goes.
2033 Note we have to handle multi insn branch sequences like ldil;ble.
2034 Most (all?) other branches can be determined by examining the contents
2035 of certain registers and the stack. */
2041 /* Make sure we haven't walked outside the range of this stub. */
2042 if (u
!= find_unwind_entry (loc
))
2044 warning ("Unable to find branch in linker stub");
2045 return orig_pc
== pc
? 0 : pc
& ~0x3;
2048 prev_inst
= curr_inst
;
2049 curr_inst
= read_memory_integer (loc
, 4);
2051 /* Does it look like a branch external using %r1? Then it's the
2052 branch from the stub to the actual function. */
2053 if ((curr_inst
& 0xffe0e000) == 0xe0202000)
2055 /* Yup. See if the previous instruction loaded
2056 a value into %r1. If so compute and return the jump address. */
2057 if ((prev_inst
& 0xffe00000) == 0x20200000)
2058 return (extract_21 (prev_inst
) + extract_17 (curr_inst
)) & ~0x3;
2061 warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
2062 return orig_pc
== pc
? 0 : pc
& ~0x3;
2066 /* Does it look like a be 0(sr0,%r21)? That's the branch from an
2067 import stub to an export stub.
2069 It is impossible to determine the target of the branch via
2070 simple examination of instructions and/or data (consider
2071 that the address in the plabel may be the address of the
2072 bind-on-reference routine in the dynamic loader).
2074 So we have try an alternative approach.
2076 Get the name of the symbol at our current location; it should
2077 be a stub symbol with the same name as the symbol in the
2080 Then lookup a minimal symbol with the same name; we should
2081 get the minimal symbol for the target routine in the shared
2082 library as those take precedence of import/export stubs. */
2083 if (curr_inst
== 0xe2a00000)
2085 struct minimal_symbol
*stubsym
, *libsym
;
2087 stubsym
= lookup_minimal_symbol_by_pc (loc
);
2088 if (stubsym
== NULL
)
2090 warning ("Unable to find symbol for 0x%x", loc
);
2091 return orig_pc
== pc
? 0 : pc
& ~0x3;
2094 libsym
= lookup_minimal_symbol (SYMBOL_NAME (stubsym
), NULL
, NULL
);
2097 warning ("Unable to find library symbol for %s\n",
2098 SYMBOL_NAME (stubsym
));
2099 return orig_pc
== pc
? 0 : pc
& ~0x3;
2102 return SYMBOL_VALUE (libsym
);
2105 /* Does it look like bl X,%rp or bl X,%r0? Another way to do a
2106 branch from the stub to the actual function. */
2107 else if ((curr_inst
& 0xffe0e000) == 0xe8400000
2108 || (curr_inst
& 0xffe0e000) == 0xe8000000)
2109 return (loc
+ extract_17 (curr_inst
) + 8) & ~0x3;
2111 /* Does it look like bv (rp)? Note this depends on the
2112 current stack pointer being the same as the stack
2113 pointer in the stub itself! This is a branch on from the
2114 stub back to the original caller. */
2115 else if ((curr_inst
& 0xffe0e000) == 0xe840c000)
2117 /* Yup. See if the previous instruction loaded
2119 if (prev_inst
== 0x4bc23ff1)
2120 return (read_memory_integer
2121 (read_register (SP_REGNUM
) - 8, 4)) & ~0x3;
2124 warning ("Unable to find restore of %%rp before bv (%%rp).");
2125 return orig_pc
== pc
? 0 : pc
& ~0x3;
2129 /* What about be,n 0(sr0,%rp)? It's just another way we return to
2130 the original caller from the stub. Used in dynamic executables. */
2131 else if (curr_inst
== 0xe0400002)
2133 /* The value we jump to is sitting in sp - 24. But that's
2134 loaded several instructions before the be instruction.
2135 I guess we could check for the previous instruction being
2136 mtsp %r1,%sr0 if we want to do sanity checking. */
2137 return (read_memory_integer
2138 (read_register (SP_REGNUM
) - 24, 4)) & ~0x3;
2141 /* Haven't found the branch yet, but we're still in the stub.
2147 /* For the given instruction (INST), return any adjustment it makes
2148 to the stack pointer or zero for no adjustment.
2150 This only handles instructions commonly found in prologues. */
2153 prologue_inst_adjust_sp (inst
)
2156 /* This must persist across calls. */
2157 static int save_high21
;
2159 /* The most common way to perform a stack adjustment ldo X(sp),sp */
2160 if ((inst
& 0xffffc000) == 0x37de0000)
2161 return extract_14 (inst
);
2164 if ((inst
& 0xffe00000) == 0x6fc00000)
2165 return extract_14 (inst
);
2167 /* addil high21,%r1; ldo low11,(%r1),%r30)
2168 save high bits in save_high21 for later use. */
2169 if ((inst
& 0xffe00000) == 0x28200000)
2171 save_high21
= extract_21 (inst
);
2175 if ((inst
& 0xffff0000) == 0x343e0000)
2176 return save_high21
+ extract_14 (inst
);
2178 /* fstws as used by the HP compilers. */
2179 if ((inst
& 0xffffffe0) == 0x2fd01220)
2180 return extract_5_load (inst
);
2182 /* No adjustment. */
2186 /* Return nonzero if INST is a branch of some kind, else return zero. */
2216 /* Return the register number for a GR which is saved by INST or
2217 zero it INST does not save a GR. */
2220 inst_saves_gr (inst
)
2223 /* Does it look like a stw? */
2224 if ((inst
>> 26) == 0x1a)
2225 return extract_5R_store (inst
);
2227 /* Does it look like a stwm? GCC & HPC may use this in prologues. */
2228 if ((inst
>> 26) == 0x1b)
2229 return extract_5R_store (inst
);
2231 /* Does it look like sth or stb? HPC versions 9.0 and later use these
2233 if ((inst
>> 26) == 0x19 || (inst
>> 26) == 0x18)
2234 return extract_5R_store (inst
);
2239 /* Return the register number for a FR which is saved by INST or
2240 zero it INST does not save a FR.
2242 Note we only care about full 64bit register stores (that's the only
2243 kind of stores the prologue will use).
2245 FIXME: What about argument stores with the HP compiler in ANSI mode? */
2248 inst_saves_fr (inst
)
2251 if ((inst
& 0xfc00dfc0) == 0x2c001200)
2252 return extract_5r_store (inst
);
2256 /* Advance PC across any function entry prologue instructions
2257 to reach some "real" code.
2259 Use information in the unwind table to determine what exactly should
2260 be in the prologue. */
2267 unsigned long inst
, stack_remaining
, save_gr
, save_fr
, save_rp
, save_sp
;
2268 unsigned long args_stored
, status
, i
;
2269 struct unwind_table_entry
*u
;
2271 u
= find_unwind_entry (pc
);
2275 /* If we are not at the beginning of a function, then return now. */
2276 if ((pc
& ~0x3) != u
->region_start
)
2279 /* This is how much of a frame adjustment we need to account for. */
2280 stack_remaining
= u
->Total_frame_size
<< 3;
2282 /* Magic register saves we want to know about. */
2283 save_rp
= u
->Save_RP
;
2284 save_sp
= u
->Save_SP
;
2286 /* An indication that args may be stored into the stack. Unfortunately
2287 the HPUX compilers tend to set this in cases where no args were
2289 args_stored
= u
->Args_stored
;
2291 /* Turn the Entry_GR field into a bitmask. */
2293 for (i
= 3; i
< u
->Entry_GR
+ 3; i
++)
2295 /* Frame pointer gets saved into a special location. */
2296 if (u
->Save_SP
&& i
== FP_REGNUM
)
2299 save_gr
|= (1 << i
);
2302 /* Turn the Entry_FR field into a bitmask too. */
2304 for (i
= 12; i
< u
->Entry_FR
+ 12; i
++)
2305 save_fr
|= (1 << i
);
2307 /* Loop until we find everything of interest or hit a branch.
2309 For unoptimized GCC code and for any HP CC code this will never ever
2310 examine any user instructions.
2312 For optimzied GCC code we're faced with problems. GCC will schedule
2313 its prologue and make prologue instructions available for delay slot
2314 filling. The end result is user code gets mixed in with the prologue
2315 and a prologue instruction may be in the delay slot of the first branch
2318 Some unexpected things are expected with debugging optimized code, so
2319 we allow this routine to walk past user instructions in optimized
2321 while (save_gr
|| save_fr
|| save_rp
|| save_sp
|| stack_remaining
> 0
2324 unsigned int reg_num
;
2325 unsigned long old_stack_remaining
, old_save_gr
, old_save_fr
;
2326 unsigned long old_save_rp
, old_save_sp
, next_inst
;
2328 /* Save copies of all the triggers so we can compare them later
2330 old_save_gr
= save_gr
;
2331 old_save_fr
= save_fr
;
2332 old_save_rp
= save_rp
;
2333 old_save_sp
= save_sp
;
2334 old_stack_remaining
= stack_remaining
;
2336 status
= target_read_memory (pc
, buf
, 4);
2337 inst
= extract_unsigned_integer (buf
, 4);
2343 /* Note the interesting effects of this instruction. */
2344 stack_remaining
-= prologue_inst_adjust_sp (inst
);
2346 /* There is only one instruction used for saving RP into the stack. */
2347 if (inst
== 0x6bc23fd9)
2350 /* This is the only way we save SP into the stack. At this time
2351 the HP compilers never bother to save SP into the stack. */
2352 if ((inst
& 0xffffc000) == 0x6fc10000)
2355 /* Account for general and floating-point register saves. */
2356 reg_num
= inst_saves_gr (inst
);
2357 save_gr
&= ~(1 << reg_num
);
2359 /* Ugh. Also account for argument stores into the stack.
2360 Unfortunately args_stored only tells us that some arguments
2361 where stored into the stack. Not how many or what kind!
2363 This is a kludge as on the HP compiler sets this bit and it
2364 never does prologue scheduling. So once we see one, skip past
2365 all of them. We have similar code for the fp arg stores below.
2367 FIXME. Can still die if we have a mix of GR and FR argument
2369 if (reg_num
>= 23 && reg_num
<= 26)
2371 while (reg_num
>= 23 && reg_num
<= 26)
2374 status
= target_read_memory (pc
, buf
, 4);
2375 inst
= extract_unsigned_integer (buf
, 4);
2378 reg_num
= inst_saves_gr (inst
);
2384 reg_num
= inst_saves_fr (inst
);
2385 save_fr
&= ~(1 << reg_num
);
2387 status
= target_read_memory (pc
+ 4, buf
, 4);
2388 next_inst
= extract_unsigned_integer (buf
, 4);
2394 /* We've got to be read to handle the ldo before the fp register
2396 if ((inst
& 0xfc000000) == 0x34000000
2397 && inst_saves_fr (next_inst
) >= 4
2398 && inst_saves_fr (next_inst
) <= 7)
2400 /* So we drop into the code below in a reasonable state. */
2401 reg_num
= inst_saves_fr (next_inst
);
2405 /* Ugh. Also account for argument stores into the stack.
2406 This is a kludge as on the HP compiler sets this bit and it
2407 never does prologue scheduling. So once we see one, skip past
2409 if (reg_num
>= 4 && reg_num
<= 7)
2411 while (reg_num
>= 4 && reg_num
<= 7)
2414 status
= target_read_memory (pc
, buf
, 4);
2415 inst
= extract_unsigned_integer (buf
, 4);
2418 if ((inst
& 0xfc000000) != 0x34000000)
2420 status
= target_read_memory (pc
+ 4, buf
, 4);
2421 next_inst
= extract_unsigned_integer (buf
, 4);
2424 reg_num
= inst_saves_fr (next_inst
);
2430 /* Quit if we hit any kind of branch. This can happen if a prologue
2431 instruction is in the delay slot of the first call/branch. */
2432 if (is_branch (inst
))
2435 /* What a crock. The HP compilers set args_stored even if no
2436 arguments were stored into the stack (boo hiss). This could
2437 cause this code to then skip a bunch of user insns (up to the
2440 To combat this we try to identify when args_stored was bogusly
2441 set and clear it. We only do this when args_stored is nonzero,
2442 all other resources are accounted for, and nothing changed on
2445 && ! (save_gr
|| save_fr
|| save_rp
|| save_sp
|| stack_remaining
> 0)
2446 && old_save_gr
== save_gr
&& old_save_fr
== save_fr
2447 && old_save_rp
== save_rp
&& old_save_sp
== save_sp
2448 && old_stack_remaining
== stack_remaining
)
2458 /* Put here the code to store, into a struct frame_saved_regs,
2459 the addresses of the saved registers of frame described by FRAME_INFO.
2460 This includes special registers such as pc and fp saved in special
2461 ways in the stack frame. sp is even more special:
2462 the address we return for it IS the sp for the next frame. */
2465 hppa_frame_find_saved_regs (frame_info
, frame_saved_regs
)
2466 struct frame_info
*frame_info
;
2467 struct frame_saved_regs
*frame_saved_regs
;
2470 struct unwind_table_entry
*u
;
2471 unsigned long inst
, stack_remaining
, save_gr
, save_fr
, save_rp
, save_sp
;
2476 /* Zero out everything. */
2477 memset (frame_saved_regs
, '\0', sizeof (struct frame_saved_regs
));
2479 /* Call dummy frames always look the same, so there's no need to
2480 examine the dummy code to determine locations of saved registers;
2481 instead, let find_dummy_frame_regs fill in the correct offsets
2482 for the saved registers. */
2483 if ((frame_info
->pc
>= frame_info
->frame
2484 && frame_info
->pc
<= (frame_info
->frame
+ CALL_DUMMY_LENGTH
2485 + 32 * 4 + (NUM_REGS
- FP0_REGNUM
) * 8
2487 find_dummy_frame_regs (frame_info
, frame_saved_regs
);
2489 /* Interrupt handlers are special too. They lay out the register
2490 state in the exact same order as the register numbers in GDB. */
2491 if (pc_in_interrupt_handler (frame_info
->pc
))
2493 for (i
= 0; i
< NUM_REGS
; i
++)
2495 /* SP is a little special. */
2497 frame_saved_regs
->regs
[SP_REGNUM
]
2498 = read_memory_integer (frame_info
->frame
+ SP_REGNUM
* 4, 4);
2500 frame_saved_regs
->regs
[i
] = frame_info
->frame
+ i
* 4;
2505 #ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP
2506 /* Handle signal handler callers. */
2507 if (frame_info
->signal_handler_caller
)
2509 FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info
, frame_saved_regs
);
2514 /* Get the starting address of the function referred to by the PC
2516 pc
= get_pc_function_start (frame_info
->pc
);
2519 u
= find_unwind_entry (pc
);
2523 /* This is how much of a frame adjustment we need to account for. */
2524 stack_remaining
= u
->Total_frame_size
<< 3;
2526 /* Magic register saves we want to know about. */
2527 save_rp
= u
->Save_RP
;
2528 save_sp
= u
->Save_SP
;
2530 /* Turn the Entry_GR field into a bitmask. */
2532 for (i
= 3; i
< u
->Entry_GR
+ 3; i
++)
2534 /* Frame pointer gets saved into a special location. */
2535 if (u
->Save_SP
&& i
== FP_REGNUM
)
2538 save_gr
|= (1 << i
);
2541 /* Turn the Entry_FR field into a bitmask too. */
2543 for (i
= 12; i
< u
->Entry_FR
+ 12; i
++)
2544 save_fr
|= (1 << i
);
2546 /* The frame always represents the value of %sp at entry to the
2547 current function (and is thus equivalent to the "saved" stack
2549 frame_saved_regs
->regs
[SP_REGNUM
] = frame_info
->frame
;
2551 /* Loop until we find everything of interest or hit a branch.
2553 For unoptimized GCC code and for any HP CC code this will never ever
2554 examine any user instructions.
2556 For optimzied GCC code we're faced with problems. GCC will schedule
2557 its prologue and make prologue instructions available for delay slot
2558 filling. The end result is user code gets mixed in with the prologue
2559 and a prologue instruction may be in the delay slot of the first branch
2562 Some unexpected things are expected with debugging optimized code, so
2563 we allow this routine to walk past user instructions in optimized
2565 while (save_gr
|| save_fr
|| save_rp
|| save_sp
|| stack_remaining
> 0)
2567 status
= target_read_memory (pc
, buf
, 4);
2568 inst
= extract_unsigned_integer (buf
, 4);
2574 /* Note the interesting effects of this instruction. */
2575 stack_remaining
-= prologue_inst_adjust_sp (inst
);
2577 /* There is only one instruction used for saving RP into the stack. */
2578 if (inst
== 0x6bc23fd9)
2581 frame_saved_regs
->regs
[RP_REGNUM
] = frame_info
->frame
- 20;
2584 /* Just note that we found the save of SP into the stack. The
2585 value for frame_saved_regs was computed above. */
2586 if ((inst
& 0xffffc000) == 0x6fc10000)
2589 /* Account for general and floating-point register saves. */
2590 reg
= inst_saves_gr (inst
);
2591 if (reg
>= 3 && reg
<= 18
2592 && (!u
->Save_SP
|| reg
!= FP_REGNUM
))
2594 save_gr
&= ~(1 << reg
);
2596 /* stwm with a positive displacement is a *post modify*. */
2597 if ((inst
>> 26) == 0x1b
2598 && extract_14 (inst
) >= 0)
2599 frame_saved_regs
->regs
[reg
] = frame_info
->frame
;
2602 /* Handle code with and without frame pointers. */
2604 frame_saved_regs
->regs
[reg
]
2605 = frame_info
->frame
+ extract_14 (inst
);
2607 frame_saved_regs
->regs
[reg
]
2608 = frame_info
->frame
+ (u
->Total_frame_size
<< 3)
2609 + extract_14 (inst
);
2614 /* GCC handles callee saved FP regs a little differently.
2616 It emits an instruction to put the value of the start of
2617 the FP store area into %r1. It then uses fstds,ma with
2618 a basereg of %r1 for the stores.
2620 HP CC emits them at the current stack pointer modifying
2621 the stack pointer as it stores each register. */
2623 /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */
2624 if ((inst
& 0xffffc000) == 0x34610000
2625 || (inst
& 0xffffc000) == 0x37c10000)
2626 fp_loc
= extract_14 (inst
);
2628 reg
= inst_saves_fr (inst
);
2629 if (reg
>= 12 && reg
<= 21)
2631 /* Note +4 braindamage below is necessary because the FP status
2632 registers are internally 8 registers rather than the expected
2634 save_fr
&= ~(1 << reg
);
2637 /* 1st HP CC FP register store. After this instruction
2638 we've set enough state that the GCC and HPCC code are
2639 both handled in the same manner. */
2640 frame_saved_regs
->regs
[reg
+ FP4_REGNUM
+ 4] = frame_info
->frame
;
2645 frame_saved_regs
->regs
[reg
+ FP0_REGNUM
+ 4]
2646 = frame_info
->frame
+ fp_loc
;
2651 /* Quit if we hit any kind of branch. This can happen if a prologue
2652 instruction is in the delay slot of the first call/branch. */
2653 if (is_branch (inst
))
2661 #ifdef MAINTENANCE_CMDS
2664 unwind_command (exp
, from_tty
)
2669 struct unwind_table_entry
*u
;
2671 /* If we have an expression, evaluate it and use it as the address. */
2673 if (exp
!= 0 && *exp
!= 0)
2674 address
= parse_and_eval_address (exp
);
2678 u
= find_unwind_entry (address
);
2682 printf_unfiltered ("Can't find unwind table entry for %s\n", exp
);
2686 printf_unfiltered ("unwind_table_entry (0x%x):\n", u
);
2688 printf_unfiltered ("\tregion_start = ");
2689 print_address (u
->region_start
, gdb_stdout
);
2691 printf_unfiltered ("\n\tregion_end = ");
2692 print_address (u
->region_end
, gdb_stdout
);
2695 #define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD);
2697 #define pif(FLD) if (u->FLD) printf_unfiltered (" FLD");
2700 printf_unfiltered ("\n\tflags =");
2701 pif (Cannot_unwind
);
2703 pif (Millicode_save_sr0
);
2706 pif (Variable_Frame
);
2707 pif (Separate_Package_Body
);
2708 pif (Frame_Extension_Millicode
);
2709 pif (Stack_Overflow_Check
);
2710 pif (Two_Instruction_SP_Increment
);
2714 pif (Save_MRP_in_frame
);
2715 pif (extn_ptr_defined
);
2716 pif (Cleanup_defined
);
2717 pif (MPE_XL_interrupt_marker
);
2718 pif (HP_UX_interrupt_marker
);
2721 putchar_unfiltered ('\n');
2724 #define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD);
2726 #define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD);
2729 pin (Region_description
);
2732 pin (Total_frame_size
);
2734 #endif /* MAINTENANCE_CMDS */
2737 _initialize_hppa_tdep ()
2739 tm_print_insn
= print_insn_hppa
;
2741 #ifdef MAINTENANCE_CMDS
2742 add_cmd ("unwind", class_maintenance
, unwind_command
,
2743 "Print unwind table entry at given address.",
2744 &maintenanceprintlist
);
2745 #endif /* MAINTENANCE_CMDS */