1 /* Intel x86 (a.k.a. ia32) native-dependent code.
2 Copyright (C) 2001 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place - Suite 330,
19 Boston, MA 02111-1307, USA. */
22 #include "breakpoint.h"
26 /* Support for hardware watchpoints and breakpoints using the x86
29 This provides several functions for inserting and removing
30 hardware-assisted breakpoints and watchpoints, testing if
31 one or more of the watchpoints triggered and at what address,
32 checking whether a given region can be watched, etc.
34 A target which wants to use these functions should define
35 several macros, such as `target_insert_watchpoint' and
36 `target_stopped_data_address', listed in target.h, to call
37 the appropriate functions below. It should also define
38 I386_USE_GENERIC_WATCHPOINTS in its tm.h file.
40 In addition, each target should provide several low-level
41 macros that will be called to insert watchpoints and hardware
42 breakpoints into the inferior, remove them, and check their
43 status. These macros are:
45 I386_DR_LOW_SET_CONTROL -- set the debug control (DR7)
46 register to a given value
48 I386_DR_LOW_SET_ADDR -- put an address into one debug
51 I386_DR_LOW_RESET_ADDR -- reset the address stored in
54 I386_DR_LOW_GET_STATUS -- return the value of the debug
55 status (DR6) register.
57 The functions below implement debug registers sharing by
58 reference counts, and allow to watch regions up to 16 bytes
61 #ifdef I386_USE_GENERIC_WATCHPOINTS
63 /* Debug registers' indices. */
64 #define DR_NADDR 4 /* the number of debug address registers */
65 #define DR_STATUS 6 /* index of debug status register (DR6) */
66 #define DR_CONTROL 7 /* index of debug control register (DR7) */
68 /* DR7 Debug Control register fields. */
70 /* How many bits to skip in DR7 to get to R/W and LEN fields. */
71 #define DR_CONTROL_SHIFT 16
72 /* How many bits in DR7 per R/W and LEN field for each watchpoint. */
73 #define DR_CONTROL_SIZE 4
75 /* Watchpoint/breakpoint read/write fields in DR7. */
76 #define DR_RW_EXECUTE (0x0) /* break on instruction execution */
77 #define DR_RW_WRITE (0x1) /* break on data writes */
78 #define DR_RW_READ (0x3) /* break on data reads or writes */
80 /* This is here for completeness. No platform supports this
81 functionality yet (as of Mar-2001). Note that the DE flag in the
82 CR4 register needs to be set to support this. */
84 #define DR_RW_IORW (0x2) /* break on I/O reads or writes */
87 /* Watchpoint/breakpoint length fields in DR7. The 2-bit left shift
88 is so we could OR this with the read/write field defined above. */
89 #define DR_LEN_1 (0x0 << 2) /* 1-byte region watch or breakpt */
90 #define DR_LEN_2 (0x1 << 2) /* 2-byte region watch */
91 #define DR_LEN_4 (0x3 << 2) /* 4-byte region watch */
93 /* Local and Global Enable flags in DR7.
95 When the Local Enable flag is set, the breakpoint/watchpoint is
96 enabled only for the current task; the processor automatically
97 clears this flag on every task switch. When the Global Enable
98 flag is set, the breakpoint/watchpoint is enabled for all tasks;
99 the processor never clears this flag.
101 Currently, all watchpoint are locally enabled. If you need to
102 enable them globally, read the comment which pertains to this in
103 i386_insert_aligned_watchpoint below. */
104 #define DR_LOCAL_ENABLE_SHIFT 0 /* extra shift to the local enable bit */
105 #define DR_GLOBAL_ENABLE_SHIFT 1 /* extra shift to the global enable bit */
106 #define DR_ENABLE_SIZE 2 /* 2 enable bits per debug register */
108 /* Local and global exact breakpoint enable flags (a.k.a. slowdown
109 flags). These are only required on i386, to allow detection of the
110 exact instruction which caused a watchpoint to break; i486 and
111 later processors do that automatically. We set these flags for
112 back compatibility. */
113 #define DR_LOCAL_SLOWDOWN (0x100)
114 #define DR_GLOBAL_SLOWDOWN (0x200)
116 /* Fields reserved by Intel. This includes the GD (General Detect
117 Enable) flag, which causes a debug exception to be generated when a
118 MOV instruction accesses one of the debug registers.
120 FIXME: My Intel manual says we should use 0xF800, not 0xFC00. */
121 #define DR_CONTROL_RESERVED (0xFC00)
123 /* Auxiliary helper macros. */
125 /* A value that masks all fields in DR7 that are reserved by Intel. */
126 #define I386_DR_CONTROL_MASK (~DR_CONTROL_RESERVED)
128 /* The I'th debug register is vacant if its Local and Global Enable
129 bits are reset in the Debug Control register. */
130 #define I386_DR_VACANT(i) \
131 ((dr_control_mirror & (3 << (DR_ENABLE_SIZE * (i)))) == 0)
133 /* Locally enable the break/watchpoint in the I'th debug register. */
134 #define I386_DR_LOCAL_ENABLE(i) \
135 dr_control_mirror |= (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))
137 /* Globally enable the break/watchpoint in the I'th debug register. */
138 #define I386_DR_GLOBAL_ENABLE(i) \
139 dr_control_mirror |= (1 << (DR_GLOBAL_ENABLE_SHIFT + DR_ENABLE_SIZE * (i)))
141 /* Disable the break/watchpoint in the I'th debug register. */
142 #define I386_DR_DISABLE(i) \
143 dr_control_mirror &= ~(3 << (DR_ENABLE_SIZE * (i)))
145 /* Set in DR7 the RW and LEN fields for the I'th debug register. */
146 #define I386_DR_SET_RW_LEN(i,rwlen) \
148 dr_control_mirror &= ~(0x0f << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i))); \
149 dr_control_mirror |= ((rwlen) << (DR_CONTROL_SHIFT+DR_CONTROL_SIZE*(i))); \
152 /* Get from DR7 the RW and LEN fields for the I'th debug register. */
153 #define I386_DR_GET_RW_LEN(i) \
154 ((dr_control_mirror >> (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * (i))) & 0x0f)
156 /* Did the watchpoint whose address is in the I'th register break? */
157 #define I386_DR_WATCH_HIT(i) (dr_status_mirror & (1 << (i)))
159 /* A macro to loop over all debug registers. */
160 #define ALL_DEBUG_REGISTERS(i) for (i = 0; i < DR_NADDR; i++)
162 /* Mirror the inferior's DRi registers. We keep the status and
163 control registers separated because they don't hold addresses. */
164 static CORE_ADDR dr_mirror
[DR_NADDR
];
165 static unsigned dr_status_mirror
, dr_control_mirror
;
167 /* Reference counts for each debug register. */
168 static int dr_ref_count
[DR_NADDR
];
170 /* Whether or not to print the mirrored debug registers. */
171 static int maint_show_dr
;
173 /* Types of operations supported by i386_handle_nonaligned_watchpoint. */
174 typedef enum { WP_INSERT
, WP_REMOVE
, WP_COUNT
} i386_wp_op_t
;
176 /* Internal functions. */
178 /* Return the value of a 4-bit field for DR7 suitable for watching a
179 region of LEN bytes for accesses of type TYPE. LEN is assumed
180 to have the value of 1, 2, or 4. */
181 static unsigned i386_length_and_rw_bits (int len
, enum target_hw_bp_type type
);
183 /* Insert a watchpoint at address ADDR, which is assumed to be aligned
184 according to the length of the region to watch. LEN_RW_BITS is the
185 value of the bit-field from DR7 which describes the length and
186 access type of the region to be watched by this watchpoint. Return
187 0 on success, -1 on failure. */
188 static int i386_insert_aligned_watchpoint (CORE_ADDR addr
,
189 unsigned len_rw_bits
);
191 /* Remove a watchpoint at address ADDR, which is assumed to be aligned
192 according to the length of the region to watch. LEN_RW_BITS is the
193 value of the bits from DR7 which describes the length and access
194 type of the region watched by this watchpoint. Return 0 on
195 success, -1 on failure. */
196 static int i386_remove_aligned_watchpoint (CORE_ADDR addr
,
197 unsigned len_rw_bits
);
199 /* Insert or remove a (possibly non-aligned) watchpoint, or count the
200 number of debug registers required to watch a region at address
201 ADDR whose length is LEN for accesses of type TYPE. Return 0 on
202 successful insertion or removal, a positive number when queried
203 about the number of registers, or -1 on failure. If WHAT is not
204 a valid value, bombs through internal_error. */
205 static int i386_handle_nonaligned_watchpoint (i386_wp_op_t what
,
206 CORE_ADDR addr
, int len
,
207 enum target_hw_bp_type type
);
209 /* Implementation. */
211 /* Clear the reference counts and forget everything we knew about
212 the debug registers. */
214 i386_cleanup_dregs (void)
218 ALL_DEBUG_REGISTERS(i
)
223 dr_control_mirror
= 0;
224 dr_status_mirror
= 0;
227 /* Print the values of the mirrored debug registers.
228 This is called when maint_show_dr is non-zero. To set that
229 up, type "maint show-debug-regs" at GDB's prompt. */
231 i386_show_dr (const char *func
, CORE_ADDR addr
,
232 int len
, enum target_hw_bp_type type
)
236 puts_unfiltered (func
);
238 printf_unfiltered (" (addr=%lx, len=%d, type=%s)",
239 /* This code is for ia32, so casting CORE_ADDR
240 to unsigned long should be okay. */
241 (unsigned long)addr
, len
,
242 type
== hw_write
? "data-write"
243 : (type
== hw_read
? "data-read"
244 : (type
== hw_access
? "data-read/write"
245 : (type
== hw_execute
? "instruction-execute"
246 /* FIXME: if/when I/O read/write
247 watchpoints are supported, add them
250 puts_unfiltered (":\n");
251 printf_unfiltered ("\tCONTROL (DR7): %08x STATUS (DR6): %08x\n",
252 dr_control_mirror
, dr_status_mirror
);
253 ALL_DEBUG_REGISTERS(i
)
255 printf_unfiltered ("\tDR%d: addr=%08lx, ref.count=%d DR%d: addr=%08lx, ref.count=%d\n",
256 i
, dr_mirror
[i
], dr_ref_count
[i
],
257 i
+1, dr_mirror
[i
+1], dr_ref_count
[i
+1]);
262 /* Return the value of a 4-bit field for DR7 suitable for watching a
263 region of LEN bytes for accesses of type TYPE. LEN is assumed
264 to have the value of 1, 2, or 4. */
266 i386_length_and_rw_bits (int len
, enum target_hw_bp_type type
)
278 case hw_read
: /* x86 doesn't support data-read watchpoints */
283 case hw_io_access
: /* not yet supported */
288 internal_error (__FILE__
, __LINE__
, "\
289 Invalid hw breakpoint type %d in i386_length_and_rw_bits.\n", (int)type
);
295 return (DR_LEN_4
| rw
);
297 return (DR_LEN_2
| rw
);
299 return (DR_LEN_1
| rw
);
301 internal_error (__FILE__
, __LINE__
, "\
302 Invalid hw breakpoint length %d in i386_length_and_rw_bits.\n", len
);
306 /* Insert a watchpoint at address ADDR, which is assumed to be aligned
307 according to the length of the region to watch. LEN_RW_BITS is the
308 value of the bits from DR7 which describes the length and access
309 type of the region to be watched by this watchpoint. Return 0 on
310 success, -1 on failure. */
312 i386_insert_aligned_watchpoint (CORE_ADDR addr
, unsigned len_rw_bits
)
316 /* First, look for an occupied debug register with the same address
317 and the same RW and LEN definitions. If we find one, we can
318 reuse it for this watchpoint as well (and save a register). */
319 ALL_DEBUG_REGISTERS(i
)
321 if (!I386_DR_VACANT (i
)
322 && dr_mirror
[i
] == addr
323 && I386_DR_GET_RW_LEN (i
) == len_rw_bits
)
330 /* Next, look for a vacant debug register. */
331 ALL_DEBUG_REGISTERS(i
)
333 if (I386_DR_VACANT (i
))
337 /* No more debug registers! */
341 /* Now set up the register I to watch our region. */
343 /* Record the info in our local mirrored array. */
346 I386_DR_SET_RW_LEN (i
, len_rw_bits
);
347 /* Note: we only enable the watchpoint locally, i.e. in the current
348 task. Currently, no x86 target allows or supports global
349 watchpoints; however, if any target would want that in the
350 future, GDB should probably provide a command to control whether
351 to enable watchpoints globally or locally, and the code below
352 should use global or local enable and slow-down flags as
354 I386_DR_LOCAL_ENABLE (i
);
355 dr_control_mirror
|= DR_LOCAL_SLOWDOWN
;
356 dr_control_mirror
&= I386_DR_CONTROL_MASK
;
358 /* Finally, actually pass the info to the inferior. */
359 I386_DR_LOW_SET_ADDR (i
, addr
);
360 I386_DR_LOW_SET_CONTROL (dr_control_mirror
);
365 /* Remove a watchpoint at address ADDR, which is assumed to be aligned
366 according to the length of the region to watch. LEN_RW_BITS is the
367 value of the bits from DR7 which describes the length and access
368 type of the region watched by this watchpoint. Return 0 on
369 success, -1 on failure. */
371 i386_remove_aligned_watchpoint (CORE_ADDR addr
, unsigned len_rw_bits
)
375 ALL_DEBUG_REGISTERS(i
)
377 if (!I386_DR_VACANT (i
)
378 && dr_mirror
[i
] == addr
379 && I386_DR_GET_RW_LEN (i
) == len_rw_bits
)
381 if (--dr_ref_count
[i
] == 0) /* no longer in use? */
383 /* Reset our mirror. */
386 /* Reset it in the inferior. */
387 I386_DR_LOW_SET_CONTROL (dr_control_mirror
);
388 I386_DR_LOW_RESET_ADDR (i
);
397 /* Insert or remove a (possibly non-aligned) watchpoint, or count the
398 number of debug registers required to watch a region at address
399 ADDR whose length is LEN for accesses of type TYPE. Return 0 on
400 successful insertion or removal, a positive number when queried
401 about the number of registers, or -1 on failure. If WHAT is not
402 a valid value, bombs through internal_error. */
404 i386_handle_nonaligned_watchpoint (i386_wp_op_t what
, CORE_ADDR addr
, int len
,
405 enum target_hw_bp_type type
)
409 int rv
= 0, status
= 0;
411 static int size_try_array
[4][4] =
413 { 1, 1, 1, 1 }, /* trying size one */
414 { 2, 1, 2, 1 }, /* trying size two */
415 { 2, 1, 2, 1 }, /* trying size three */
416 { 4, 1, 2, 1 } /* trying size four */
422 /* Four is the maximum length an x86 debug register can watch. */
423 size
= size_try_array
[len
> 4 ? 3 : len
- 1][align
];
424 if (what
== WP_COUNT
)
425 /* size_try_array[] is defined so that each iteration through
426 the loop is guaranteed to produce an address and a size
427 that can be watched with a single debug register. Thus,
428 for counting the registers required to watch a region, we
429 simply need to increment the count on each iteration. */
433 unsigned len_rw
= i386_length_and_rw_bits (size
, type
);
435 if (what
== WP_INSERT
)
436 status
= i386_insert_aligned_watchpoint (addr
, len_rw
);
437 else if (what
== WP_REMOVE
)
438 status
= i386_remove_aligned_watchpoint (addr
, len_rw
);
440 internal_error (__FILE__
, __LINE__
, "\
441 Invalid value %d of operation in i386_handle_nonaligned_watchpoint.\n",
443 /* We keep the loop going even after a failure, because some
444 of the other aligned watchpoints might still succeed
445 (e.g. if they watch addresses that are already watched,
446 in which case we just increment the reference counts of
447 occupied debug registers). If we break out of the loop
448 too early, we could cause those addresses watched by
449 other watchpoints to be disabled when breakpoint.c reacts
450 to our failure to insert this watchpoint and tries to
461 /* Insert a watchpoint to watch a memory region which starts at
462 address ADDR and whose length is LEN bytes. Watch memory accesses
463 of the type TYPE. Return 0 on success, -1 on failure. */
465 i386_insert_watchpoint (CORE_ADDR addr
, int len
, int type
)
469 if (len
== 3 || len
> 4 || addr
% len
!= 0)
470 retval
= i386_handle_nonaligned_watchpoint (WP_INSERT
, addr
, len
, type
);
473 unsigned len_rw
= i386_length_and_rw_bits (len
, type
);
475 retval
= i386_insert_aligned_watchpoint (addr
, len_rw
);
479 i386_show_dr ("insert_watchpoint", addr
, len
, type
);
484 /* Remove a watchpoint that watched the memory region which starts at
485 address ADDR, whose length is LEN bytes, and for accesses of the
486 type TYPE. Return 0 on success, -1 on failure. */
488 i386_remove_watchpoint (CORE_ADDR addr
, int len
, int type
)
492 if (len
== 3 || len
> 4 || addr
% len
!= 0)
493 retval
= i386_handle_nonaligned_watchpoint (WP_REMOVE
, addr
, len
, type
);
496 unsigned len_rw
= i386_length_and_rw_bits (len
, type
);
498 retval
= i386_remove_aligned_watchpoint (addr
, len_rw
);
502 i386_show_dr ("remove_watchpoint", addr
, len
, type
);
507 /* Return non-zero if we can watch a memory region that starts at
508 address ADDR and whose length is LEN bytes. */
510 i386_region_ok_for_watchpoint (CORE_ADDR addr
, int len
)
512 /* Compute how many aligned watchpoints we would need to cover this
514 int nregs
= i386_handle_nonaligned_watchpoint (WP_COUNT
, addr
, len
,
517 return nregs
<= DR_NADDR
? 1 : 0;
520 /* If the inferior has some watchpoint that triggered, return the
521 address associated with that watchpoint. Otherwise, return
524 i386_stopped_data_address (void)
529 dr_status_mirror
= I386_DR_LOW_GET_STATUS ();
531 ALL_DEBUG_REGISTERS(i
)
533 if (I386_DR_WATCH_HIT (i
)
534 /* This second condition makes sure DRi is set up for a data
535 watchpoint, not a hardware breakpoint. The reason is
536 that GDB doesn't call the target_stopped_data_address
537 method except for data watchpoints. In other words, I'm
539 && I386_DR_GET_RW_LEN (i
) != 0)
543 i386_show_dr ("watchpoint_hit", ret
, -1, hw_write
);
546 if (maint_show_dr
&& ret
== 0)
547 i386_show_dr ("stopped_data_addr", 0, 0, hw_write
);
552 /* Return non-zero if the inferior has some break/watchpoint that
555 i386_stopped_by_hwbp (void)
559 dr_status_mirror
= I386_DR_LOW_GET_STATUS ();
561 i386_show_dr ("stopped_by_hwbp", 0, 0, hw_execute
);
563 ALL_DEBUG_REGISTERS(i
)
565 if (I386_DR_WATCH_HIT (i
))
572 /* Insert a hardware-assisted breakpoint at address ADDR. SHADOW is
573 unused. Return 0 on success, EBUSY on failure. */
575 i386_insert_hw_breakpoint (CORE_ADDR addr
, void *shadow
)
577 unsigned len_rw
= i386_length_and_rw_bits (1, hw_execute
);
578 int retval
= i386_insert_aligned_watchpoint (addr
, len_rw
) ? EBUSY
: 0;
581 i386_show_dr ("insert_hwbp", addr
, 1, hw_execute
);
586 /* Remove a hardware-assisted breakpoint at address ADDR. SHADOW is
587 unused. Return 0 on success, -1 on failure. */
589 i386_remove_hw_breakpoint (CORE_ADDR addr
, void *shadow
)
591 unsigned len_rw
= i386_length_and_rw_bits (1, hw_execute
);
592 int retval
= i386_remove_aligned_watchpoint (addr
, len_rw
);
595 i386_show_dr ("remove_hwbp", addr
, 1, hw_execute
);
600 #endif /* I386_USE_GENERIC_WATCHPOINTS */
604 _initialize_i386_nat (void)
606 #ifdef I386_USE_GENERIC_WATCHPOINTS
607 /* A maintenance command to enable printing the internal DRi mirror
609 add_set_cmd ("show-debug-regs", class_maintenance
,
610 var_boolean
, (char *) &maint_show_dr
,
612 Set whether to show variables that mirror the x86 debug registers.\n\
613 Use \"on\" to enable, \"off\" to disable.\n\
614 If enabled, the debug registers values are shown when GDB inserts\n\
615 or removes a hardware breakpoint or watchpoint, and when the inferior\n\
616 triggers a breakpoint or watchpoint.", &maintenancelist
);
This page took 0.041697 seconds and 4 git commands to generate.