1 /* GNU/Linux native-dependent code common to multiple platforms.
3 Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007
4 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street, Fifth Floor,
21 Boston, MA 02110-1301, USA. */
26 #include "gdb_string.h"
28 #include "gdb_assert.h"
29 #ifdef HAVE_TKILL_SYSCALL
31 #include <sys/syscall.h>
33 #include <sys/ptrace.h>
34 #include "linux-nat.h"
35 #include "linux-fork.h"
36 #include "gdbthread.h"
40 #include "inf-ptrace.h"
42 #include <sys/param.h> /* for MAXPATHLEN */
43 #include <sys/procfs.h> /* for elf_gregset etc. */
44 #include "elf-bfd.h" /* for elfcore_write_* */
45 #include "gregset.h" /* for gregset */
46 #include "gdbcore.h" /* for get_exec_file */
47 #include <ctype.h> /* for isdigit */
48 #include "gdbthread.h" /* for struct thread_info etc. */
49 #include "gdb_stat.h" /* for struct stat */
50 #include <fcntl.h> /* for O_RDONLY */
56 /* If the system headers did not provide the constants, hard-code the normal
58 #ifndef PTRACE_EVENT_FORK
60 #define PTRACE_SETOPTIONS 0x4200
61 #define PTRACE_GETEVENTMSG 0x4201
63 /* options set using PTRACE_SETOPTIONS */
64 #define PTRACE_O_TRACESYSGOOD 0x00000001
65 #define PTRACE_O_TRACEFORK 0x00000002
66 #define PTRACE_O_TRACEVFORK 0x00000004
67 #define PTRACE_O_TRACECLONE 0x00000008
68 #define PTRACE_O_TRACEEXEC 0x00000010
69 #define PTRACE_O_TRACEVFORKDONE 0x00000020
70 #define PTRACE_O_TRACEEXIT 0x00000040
72 /* Wait extended result codes for the above trace options. */
73 #define PTRACE_EVENT_FORK 1
74 #define PTRACE_EVENT_VFORK 2
75 #define PTRACE_EVENT_CLONE 3
76 #define PTRACE_EVENT_EXEC 4
77 #define PTRACE_EVENT_VFORK_DONE 5
78 #define PTRACE_EVENT_EXIT 6
80 #endif /* PTRACE_EVENT_FORK */
82 /* We can't always assume that this flag is available, but all systems
83 with the ptrace event handlers also have __WALL, so it's safe to use
86 #define __WALL 0x40000000 /* Wait for any child. */
89 /* The single-threaded native GNU/Linux target_ops. We save a pointer for
90 the use of the multi-threaded target. */
91 static struct target_ops
*linux_ops
;
92 static struct target_ops linux_ops_saved
;
94 /* The saved to_xfer_partial method, inherited from inf-ptrace.c.
95 Called by our to_xfer_partial. */
96 static LONGEST (*super_xfer_partial
) (struct target_ops
*,
98 const char *, gdb_byte
*,
102 static int debug_linux_nat
;
104 show_debug_linux_nat (struct ui_file
*file
, int from_tty
,
105 struct cmd_list_element
*c
, const char *value
)
107 fprintf_filtered (file
, _("Debugging of GNU/Linux lwp module is %s.\n"),
111 static int linux_parent_pid
;
113 struct simple_pid_list
117 struct simple_pid_list
*next
;
119 struct simple_pid_list
*stopped_pids
;
121 /* This variable is a tri-state flag: -1 for unknown, 0 if PTRACE_O_TRACEFORK
122 can not be used, 1 if it can. */
124 static int linux_supports_tracefork_flag
= -1;
126 /* If we have PTRACE_O_TRACEFORK, this flag indicates whether we also have
127 PTRACE_O_TRACEVFORKDONE. */
129 static int linux_supports_tracevforkdone_flag
= -1;
132 /* Trivial list manipulation functions to keep track of a list of
133 new stopped processes. */
135 add_to_pid_list (struct simple_pid_list
**listp
, int pid
, int status
)
137 struct simple_pid_list
*new_pid
= xmalloc (sizeof (struct simple_pid_list
));
139 new_pid
->status
= status
;
140 new_pid
->next
= *listp
;
145 pull_pid_from_list (struct simple_pid_list
**listp
, int pid
, int *status
)
147 struct simple_pid_list
**p
;
149 for (p
= listp
; *p
!= NULL
; p
= &(*p
)->next
)
150 if ((*p
)->pid
== pid
)
152 struct simple_pid_list
*next
= (*p
)->next
;
153 *status
= (*p
)->status
;
162 linux_record_stopped_pid (int pid
, int status
)
164 add_to_pid_list (&stopped_pids
, pid
, status
);
168 /* A helper function for linux_test_for_tracefork, called after fork (). */
171 linux_tracefork_child (void)
175 ptrace (PTRACE_TRACEME
, 0, 0, 0);
176 kill (getpid (), SIGSTOP
);
181 /* Wrapper function for waitpid which handles EINTR. */
184 my_waitpid (int pid
, int *status
, int flags
)
189 ret
= waitpid (pid
, status
, flags
);
191 while (ret
== -1 && errno
== EINTR
);
196 /* Determine if PTRACE_O_TRACEFORK can be used to follow fork events.
198 First, we try to enable fork tracing on ORIGINAL_PID. If this fails,
199 we know that the feature is not available. This may change the tracing
200 options for ORIGINAL_PID, but we'll be setting them shortly anyway.
202 However, if it succeeds, we don't know for sure that the feature is
203 available; old versions of PTRACE_SETOPTIONS ignored unknown options. We
204 create a child process, attach to it, use PTRACE_SETOPTIONS to enable
205 fork tracing, and let it fork. If the process exits, we assume that we
206 can't use TRACEFORK; if we get the fork notification, and we can extract
207 the new child's PID, then we assume that we can. */
210 linux_test_for_tracefork (int original_pid
)
212 int child_pid
, ret
, status
;
215 linux_supports_tracefork_flag
= 0;
216 linux_supports_tracevforkdone_flag
= 0;
218 ret
= ptrace (PTRACE_SETOPTIONS
, original_pid
, 0, PTRACE_O_TRACEFORK
);
224 perror_with_name (("fork"));
227 linux_tracefork_child ();
229 ret
= my_waitpid (child_pid
, &status
, 0);
231 perror_with_name (("waitpid"));
232 else if (ret
!= child_pid
)
233 error (_("linux_test_for_tracefork: waitpid: unexpected result %d."), ret
);
234 if (! WIFSTOPPED (status
))
235 error (_("linux_test_for_tracefork: waitpid: unexpected status %d."), status
);
237 ret
= ptrace (PTRACE_SETOPTIONS
, child_pid
, 0, PTRACE_O_TRACEFORK
);
240 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
243 warning (_("linux_test_for_tracefork: failed to kill child"));
247 ret
= my_waitpid (child_pid
, &status
, 0);
248 if (ret
!= child_pid
)
249 warning (_("linux_test_for_tracefork: failed to wait for killed child"));
250 else if (!WIFSIGNALED (status
))
251 warning (_("linux_test_for_tracefork: unexpected wait status 0x%x from "
252 "killed child"), status
);
257 /* Check whether PTRACE_O_TRACEVFORKDONE is available. */
258 ret
= ptrace (PTRACE_SETOPTIONS
, child_pid
, 0,
259 PTRACE_O_TRACEFORK
| PTRACE_O_TRACEVFORKDONE
);
260 linux_supports_tracevforkdone_flag
= (ret
== 0);
262 ret
= ptrace (PTRACE_CONT
, child_pid
, 0, 0);
264 warning (_("linux_test_for_tracefork: failed to resume child"));
266 ret
= my_waitpid (child_pid
, &status
, 0);
268 if (ret
== child_pid
&& WIFSTOPPED (status
)
269 && status
>> 16 == PTRACE_EVENT_FORK
)
272 ret
= ptrace (PTRACE_GETEVENTMSG
, child_pid
, 0, &second_pid
);
273 if (ret
== 0 && second_pid
!= 0)
277 linux_supports_tracefork_flag
= 1;
278 my_waitpid (second_pid
, &second_status
, 0);
279 ret
= ptrace (PTRACE_KILL
, second_pid
, 0, 0);
281 warning (_("linux_test_for_tracefork: failed to kill second child"));
282 my_waitpid (second_pid
, &status
, 0);
286 warning (_("linux_test_for_tracefork: unexpected result from waitpid "
287 "(%d, status 0x%x)"), ret
, status
);
289 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
291 warning (_("linux_test_for_tracefork: failed to kill child"));
292 my_waitpid (child_pid
, &status
, 0);
295 /* Return non-zero iff we have tracefork functionality available.
296 This function also sets linux_supports_tracefork_flag. */
299 linux_supports_tracefork (int pid
)
301 if (linux_supports_tracefork_flag
== -1)
302 linux_test_for_tracefork (pid
);
303 return linux_supports_tracefork_flag
;
307 linux_supports_tracevforkdone (int pid
)
309 if (linux_supports_tracefork_flag
== -1)
310 linux_test_for_tracefork (pid
);
311 return linux_supports_tracevforkdone_flag
;
316 linux_enable_event_reporting (ptid_t ptid
)
318 int pid
= ptid_get_lwp (ptid
);
322 pid
= ptid_get_pid (ptid
);
324 if (! linux_supports_tracefork (pid
))
327 options
= PTRACE_O_TRACEFORK
| PTRACE_O_TRACEVFORK
| PTRACE_O_TRACEEXEC
328 | PTRACE_O_TRACECLONE
;
329 if (linux_supports_tracevforkdone (pid
))
330 options
|= PTRACE_O_TRACEVFORKDONE
;
332 /* Do not enable PTRACE_O_TRACEEXIT until GDB is more prepared to support
333 read-only process state. */
335 ptrace (PTRACE_SETOPTIONS
, pid
, 0, options
);
339 child_post_attach (int pid
)
341 linux_enable_event_reporting (pid_to_ptid (pid
));
342 check_for_thread_db ();
346 linux_child_post_startup_inferior (ptid_t ptid
)
348 linux_enable_event_reporting (ptid
);
349 check_for_thread_db ();
353 child_follow_fork (struct target_ops
*ops
, int follow_child
)
356 struct target_waitstatus last_status
;
358 int parent_pid
, child_pid
;
360 get_last_target_status (&last_ptid
, &last_status
);
361 has_vforked
= (last_status
.kind
== TARGET_WAITKIND_VFORKED
);
362 parent_pid
= ptid_get_lwp (last_ptid
);
364 parent_pid
= ptid_get_pid (last_ptid
);
365 child_pid
= last_status
.value
.related_pid
;
369 /* We're already attached to the parent, by default. */
371 /* Before detaching from the child, remove all breakpoints from
372 it. (This won't actually modify the breakpoint list, but will
373 physically remove the breakpoints from the child.) */
374 /* If we vforked this will remove the breakpoints from the parent
375 also, but they'll be reinserted below. */
376 detach_breakpoints (child_pid
);
378 /* Detach new forked process? */
383 target_terminal_ours ();
384 fprintf_filtered (gdb_stdlog
,
385 "Detaching after fork from child process %d.\n",
389 ptrace (PTRACE_DETACH
, child_pid
, 0, 0);
393 struct fork_info
*fp
;
394 /* Retain child fork in ptrace (stopped) state. */
395 fp
= find_fork_pid (child_pid
);
397 fp
= add_fork (child_pid
);
398 fork_save_infrun_state (fp
, 0);
403 gdb_assert (linux_supports_tracefork_flag
>= 0);
404 if (linux_supports_tracevforkdone (0))
408 ptrace (PTRACE_CONT
, parent_pid
, 0, 0);
409 my_waitpid (parent_pid
, &status
, __WALL
);
410 if ((status
>> 16) != PTRACE_EVENT_VFORK_DONE
)
411 warning (_("Unexpected waitpid result %06x when waiting for "
412 "vfork-done"), status
);
416 /* We can't insert breakpoints until the child has
417 finished with the shared memory region. We need to
418 wait until that happens. Ideal would be to just
420 - ptrace (PTRACE_SYSCALL, parent_pid, 0, 0);
421 - waitpid (parent_pid, &status, __WALL);
422 However, most architectures can't handle a syscall
423 being traced on the way out if it wasn't traced on
426 We might also think to loop, continuing the child
427 until it exits or gets a SIGTRAP. One problem is
428 that the child might call ptrace with PTRACE_TRACEME.
430 There's no simple and reliable way to figure out when
431 the vforked child will be done with its copy of the
432 shared memory. We could step it out of the syscall,
433 two instructions, let it go, and then single-step the
434 parent once. When we have hardware single-step, this
435 would work; with software single-step it could still
436 be made to work but we'd have to be able to insert
437 single-step breakpoints in the child, and we'd have
438 to insert -just- the single-step breakpoint in the
439 parent. Very awkward.
441 In the end, the best we can do is to make sure it
442 runs for a little while. Hopefully it will be out of
443 range of any breakpoints we reinsert. Usually this
444 is only the single-step breakpoint at vfork's return
450 /* Since we vforked, breakpoints were removed in the parent
451 too. Put them back. */
452 reattach_breakpoints (parent_pid
);
457 char child_pid_spelling
[40];
459 /* Needed to keep the breakpoint lists in sync. */
461 detach_breakpoints (child_pid
);
463 /* Before detaching from the parent, remove all breakpoints from it. */
464 remove_breakpoints ();
468 target_terminal_ours ();
469 fprintf_filtered (gdb_stdlog
,
470 "Attaching after fork to child process %d.\n",
474 /* If we're vforking, we may want to hold on to the parent until
475 the child exits or execs. At exec time we can remove the old
476 breakpoints from the parent and detach it; at exit time we
477 could do the same (or even, sneakily, resume debugging it - the
478 child's exec has failed, or something similar).
480 This doesn't clean up "properly", because we can't call
481 target_detach, but that's OK; if the current target is "child",
482 then it doesn't need any further cleanups, and lin_lwp will
483 generally not encounter vfork (vfork is defined to fork
486 The holding part is very easy if we have VFORKDONE events;
487 but keeping track of both processes is beyond GDB at the
488 moment. So we don't expose the parent to the rest of GDB.
489 Instead we quietly hold onto it until such time as we can
493 linux_parent_pid
= parent_pid
;
494 else if (!detach_fork
)
496 struct fork_info
*fp
;
497 /* Retain parent fork in ptrace (stopped) state. */
498 fp
= find_fork_pid (parent_pid
);
500 fp
= add_fork (parent_pid
);
501 fork_save_infrun_state (fp
, 0);
505 target_detach (NULL
, 0);
508 inferior_ptid
= pid_to_ptid (child_pid
);
510 /* Reinstall ourselves, since we might have been removed in
511 target_detach (which does other necessary cleanup). */
515 /* Reset breakpoints in the child as appropriate. */
516 follow_inferior_reset_breakpoints ();
524 child_insert_fork_catchpoint (int pid
)
526 if (! linux_supports_tracefork (pid
))
527 error (_("Your system does not support fork catchpoints."));
531 child_insert_vfork_catchpoint (int pid
)
533 if (!linux_supports_tracefork (pid
))
534 error (_("Your system does not support vfork catchpoints."));
538 child_insert_exec_catchpoint (int pid
)
540 if (!linux_supports_tracefork (pid
))
541 error (_("Your system does not support exec catchpoints."));
544 /* On GNU/Linux there are no real LWP's. The closest thing to LWP's
545 are processes sharing the same VM space. A multi-threaded process
546 is basically a group of such processes. However, such a grouping
547 is almost entirely a user-space issue; the kernel doesn't enforce
548 such a grouping at all (this might change in the future). In
549 general, we'll rely on the threads library (i.e. the GNU/Linux
550 Threads library) to provide such a grouping.
552 It is perfectly well possible to write a multi-threaded application
553 without the assistance of a threads library, by using the clone
554 system call directly. This module should be able to give some
555 rudimentary support for debugging such applications if developers
556 specify the CLONE_PTRACE flag in the clone system call, and are
557 using the Linux kernel 2.4 or above.
559 Note that there are some peculiarities in GNU/Linux that affect
562 - In general one should specify the __WCLONE flag to waitpid in
563 order to make it report events for any of the cloned processes
564 (and leave it out for the initial process). However, if a cloned
565 process has exited the exit status is only reported if the
566 __WCLONE flag is absent. Linux kernel 2.4 has a __WALL flag, but
567 we cannot use it since GDB must work on older systems too.
569 - When a traced, cloned process exits and is waited for by the
570 debugger, the kernel reassigns it to the original parent and
571 keeps it around as a "zombie". Somehow, the GNU/Linux Threads
572 library doesn't notice this, which leads to the "zombie problem":
573 When debugged a multi-threaded process that spawns a lot of
574 threads will run out of processes, even if the threads exit,
575 because the "zombies" stay around. */
577 /* List of known LWPs. */
578 static struct lwp_info
*lwp_list
;
580 /* Number of LWPs in the list. */
584 #define GET_LWP(ptid) ptid_get_lwp (ptid)
585 #define GET_PID(ptid) ptid_get_pid (ptid)
586 #define is_lwp(ptid) (GET_LWP (ptid) != 0)
587 #define BUILD_LWP(lwp, pid) ptid_build (pid, lwp, 0)
589 /* If the last reported event was a SIGTRAP, this variable is set to
590 the process id of the LWP/thread that got it. */
594 /* Since we cannot wait (in linux_nat_wait) for the initial process and
595 any cloned processes with a single call to waitpid, we have to use
596 the WNOHANG flag and call waitpid in a loop. To optimize
597 things a bit we use `sigsuspend' to wake us up when a process has
598 something to report (it will send us a SIGCHLD if it has). To make
599 this work we have to juggle with the signal mask. We save the
600 original signal mask such that we can restore it before creating a
601 new process in order to avoid blocking certain signals in the
602 inferior. We then block SIGCHLD during the waitpid/sigsuspend
605 /* Original signal mask. */
606 static sigset_t normal_mask
;
608 /* Signal mask for use with sigsuspend in linux_nat_wait, initialized in
609 _initialize_linux_nat. */
610 static sigset_t suspend_mask
;
612 /* Signals to block to make that sigsuspend work. */
613 static sigset_t blocked_mask
;
616 /* Prototypes for local functions. */
617 static int stop_wait_callback (struct lwp_info
*lp
, void *data
);
618 static int linux_nat_thread_alive (ptid_t ptid
);
620 /* Convert wait status STATUS to a string. Used for printing debug
624 status_to_str (int status
)
628 if (WIFSTOPPED (status
))
629 snprintf (buf
, sizeof (buf
), "%s (stopped)",
630 strsignal (WSTOPSIG (status
)));
631 else if (WIFSIGNALED (status
))
632 snprintf (buf
, sizeof (buf
), "%s (terminated)",
633 strsignal (WSTOPSIG (status
)));
635 snprintf (buf
, sizeof (buf
), "%d (exited)", WEXITSTATUS (status
));
640 /* Initialize the list of LWPs. Note that this module, contrary to
641 what GDB's generic threads layer does for its thread list,
642 re-initializes the LWP lists whenever we mourn or detach (which
643 doesn't involve mourning) the inferior. */
648 struct lwp_info
*lp
, *lpnext
;
650 for (lp
= lwp_list
; lp
; lp
= lpnext
)
660 /* Add the LWP specified by PID to the list. Return a pointer to the
661 structure describing the new LWP. */
663 static struct lwp_info
*
664 add_lwp (ptid_t ptid
)
668 gdb_assert (is_lwp (ptid
));
670 lp
= (struct lwp_info
*) xmalloc (sizeof (struct lwp_info
));
672 memset (lp
, 0, sizeof (struct lwp_info
));
674 lp
->waitstatus
.kind
= TARGET_WAITKIND_IGNORE
;
685 /* Remove the LWP specified by PID from the list. */
688 delete_lwp (ptid_t ptid
)
690 struct lwp_info
*lp
, *lpprev
;
694 for (lp
= lwp_list
; lp
; lpprev
= lp
, lp
= lp
->next
)
695 if (ptid_equal (lp
->ptid
, ptid
))
704 lpprev
->next
= lp
->next
;
711 /* Return a pointer to the structure describing the LWP corresponding
712 to PID. If no corresponding LWP could be found, return NULL. */
714 static struct lwp_info
*
715 find_lwp_pid (ptid_t ptid
)
721 lwp
= GET_LWP (ptid
);
723 lwp
= GET_PID (ptid
);
725 for (lp
= lwp_list
; lp
; lp
= lp
->next
)
726 if (lwp
== GET_LWP (lp
->ptid
))
732 /* Call CALLBACK with its second argument set to DATA for every LWP in
733 the list. If CALLBACK returns 1 for a particular LWP, return a
734 pointer to the structure describing that LWP immediately.
735 Otherwise return NULL. */
738 iterate_over_lwps (int (*callback
) (struct lwp_info
*, void *), void *data
)
740 struct lwp_info
*lp
, *lpnext
;
742 for (lp
= lwp_list
; lp
; lp
= lpnext
)
745 if ((*callback
) (lp
, data
))
752 /* Update our internal state when changing from one fork (checkpoint,
753 et cetera) to another indicated by NEW_PTID. We can only switch
754 single-threaded applications, so we only create one new LWP, and
755 the previous list is discarded. */
758 linux_nat_switch_fork (ptid_t new_ptid
)
763 lp
= add_lwp (new_ptid
);
767 /* Record a PTID for later deletion. */
772 struct saved_ptids
*next
;
774 static struct saved_ptids
*threads_to_delete
;
777 record_dead_thread (ptid_t ptid
)
779 struct saved_ptids
*p
= xmalloc (sizeof (struct saved_ptids
));
781 p
->next
= threads_to_delete
;
782 threads_to_delete
= p
;
785 /* Delete any dead threads which are not the current thread. */
790 struct saved_ptids
**p
= &threads_to_delete
;
793 if (! ptid_equal ((*p
)->ptid
, inferior_ptid
))
795 struct saved_ptids
*tmp
= *p
;
796 delete_thread (tmp
->ptid
);
804 /* Callback for iterate_over_threads that finds a thread corresponding
808 find_thread_from_lwp (struct thread_info
*thr
, void *dummy
)
810 ptid_t
*ptid_p
= dummy
;
812 if (GET_LWP (thr
->ptid
) && GET_LWP (thr
->ptid
) == GET_LWP (*ptid_p
))
818 /* Handle the exit of a single thread LP. */
821 exit_lwp (struct lwp_info
*lp
)
823 if (in_thread_list (lp
->ptid
))
825 /* Core GDB cannot deal with us deleting the current thread. */
826 if (!ptid_equal (lp
->ptid
, inferior_ptid
))
827 delete_thread (lp
->ptid
);
829 record_dead_thread (lp
->ptid
);
830 printf_unfiltered (_("[%s exited]\n"),
831 target_pid_to_str (lp
->ptid
));
835 /* Even if LP->PTID is not in the global GDB thread list, the
836 LWP may be - with an additional thread ID. We don't need
837 to print anything in this case; thread_db is in use and
838 already took care of that. But it didn't delete the thread
839 in order to handle zombies correctly. */
841 struct thread_info
*thr
;
843 thr
= iterate_over_threads (find_thread_from_lwp
, &lp
->ptid
);
846 if (!ptid_equal (thr
->ptid
, inferior_ptid
))
847 delete_thread (thr
->ptid
);
849 record_dead_thread (thr
->ptid
);
853 delete_lwp (lp
->ptid
);
856 /* Attach to the LWP specified by PID. If VERBOSE is non-zero, print
857 a message telling the user that a new LWP has been added to the
858 process. Return 0 if successful or -1 if the new LWP could not
862 lin_lwp_attach_lwp (ptid_t ptid
, int verbose
)
866 gdb_assert (is_lwp (ptid
));
868 /* Make sure SIGCHLD is blocked. We don't want SIGCHLD events
869 to interrupt either the ptrace() or waitpid() calls below. */
870 if (!sigismember (&blocked_mask
, SIGCHLD
))
872 sigaddset (&blocked_mask
, SIGCHLD
);
873 sigprocmask (SIG_BLOCK
, &blocked_mask
, NULL
);
876 lp
= find_lwp_pid (ptid
);
878 /* We assume that we're already attached to any LWP that has an id
879 equal to the overall process id, and to any LWP that is already
880 in our list of LWPs. If we're not seeing exit events from threads
881 and we've had PID wraparound since we last tried to stop all threads,
882 this assumption might be wrong; fortunately, this is very unlikely
884 if (GET_LWP (ptid
) != GET_PID (ptid
) && lp
== NULL
)
889 if (ptrace (PTRACE_ATTACH
, GET_LWP (ptid
), 0, 0) < 0)
891 /* If we fail to attach to the thread, issue a warning,
892 but continue. One way this can happen is if thread
893 creation is interrupted; as of Linux 2.6.19, a kernel
894 bug may place threads in the thread list and then fail
896 warning (_("Can't attach %s: %s"), target_pid_to_str (ptid
),
897 safe_strerror (errno
));
905 fprintf_unfiltered (gdb_stdlog
,
906 "LLAL: PTRACE_ATTACH %s, 0, 0 (OK)\n",
907 target_pid_to_str (ptid
));
909 pid
= my_waitpid (GET_LWP (ptid
), &status
, 0);
910 if (pid
== -1 && errno
== ECHILD
)
912 /* Try again with __WCLONE to check cloned processes. */
913 pid
= my_waitpid (GET_LWP (ptid
), &status
, __WCLONE
);
917 gdb_assert (pid
== GET_LWP (ptid
)
918 && WIFSTOPPED (status
) && WSTOPSIG (status
));
920 target_post_attach (pid
);
926 fprintf_unfiltered (gdb_stdlog
,
927 "LLAL: waitpid %s received %s\n",
928 target_pid_to_str (ptid
),
929 status_to_str (status
));
934 /* We assume that the LWP representing the original process is
935 already stopped. Mark it as stopped in the data structure
936 that the GNU/linux ptrace layer uses to keep track of
937 threads. Note that this won't have already been done since
938 the main thread will have, we assume, been stopped by an
939 attach from a different layer. */
946 printf_filtered (_("[New %s]\n"), target_pid_to_str (ptid
));
952 linux_nat_attach (char *args
, int from_tty
)
958 /* FIXME: We should probably accept a list of process id's, and
959 attach all of them. */
960 linux_ops
->to_attach (args
, from_tty
);
962 /* Add the initial process as the first LWP to the list. */
963 inferior_ptid
= BUILD_LWP (GET_PID (inferior_ptid
), GET_PID (inferior_ptid
));
964 lp
= add_lwp (inferior_ptid
);
966 /* Make sure the initial process is stopped. The user-level threads
967 layer might want to poke around in the inferior, and that won't
968 work if things haven't stabilized yet. */
969 pid
= my_waitpid (GET_PID (inferior_ptid
), &status
, 0);
970 if (pid
== -1 && errno
== ECHILD
)
972 warning (_("%s is a cloned process"), target_pid_to_str (inferior_ptid
));
974 /* Try again with __WCLONE to check cloned processes. */
975 pid
= my_waitpid (GET_PID (inferior_ptid
), &status
, __WCLONE
);
979 gdb_assert (pid
== GET_PID (inferior_ptid
)
980 && WIFSTOPPED (status
) && WSTOPSIG (status
) == SIGSTOP
);
984 /* Fake the SIGSTOP that core GDB expects. */
985 lp
->status
= W_STOPCODE (SIGSTOP
);
989 fprintf_unfiltered (gdb_stdlog
,
990 "LLA: waitpid %ld, faking SIGSTOP\n", (long) pid
);
995 detach_callback (struct lwp_info
*lp
, void *data
)
997 gdb_assert (lp
->status
== 0 || WIFSTOPPED (lp
->status
));
999 if (debug_linux_nat
&& lp
->status
)
1000 fprintf_unfiltered (gdb_stdlog
, "DC: Pending %s for %s on detach.\n",
1001 strsignal (WSTOPSIG (lp
->status
)),
1002 target_pid_to_str (lp
->ptid
));
1004 while (lp
->signalled
&& lp
->stopped
)
1007 if (ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0,
1008 WSTOPSIG (lp
->status
)) < 0)
1009 error (_("Can't continue %s: %s"), target_pid_to_str (lp
->ptid
),
1010 safe_strerror (errno
));
1012 if (debug_linux_nat
)
1013 fprintf_unfiltered (gdb_stdlog
,
1014 "DC: PTRACE_CONTINUE (%s, 0, %s) (OK)\n",
1015 target_pid_to_str (lp
->ptid
),
1016 status_to_str (lp
->status
));
1021 /* FIXME drow/2003-08-26: There was a call to stop_wait_callback
1022 here. But since lp->signalled was cleared above,
1023 stop_wait_callback didn't do anything; the process was left
1024 running. Shouldn't we be waiting for it to stop?
1025 I've removed the call, since stop_wait_callback now does do
1026 something when called with lp->signalled == 0. */
1028 gdb_assert (lp
->status
== 0 || WIFSTOPPED (lp
->status
));
1031 /* We don't actually detach from the LWP that has an id equal to the
1032 overall process id just yet. */
1033 if (GET_LWP (lp
->ptid
) != GET_PID (lp
->ptid
))
1036 if (ptrace (PTRACE_DETACH
, GET_LWP (lp
->ptid
), 0,
1037 WSTOPSIG (lp
->status
)) < 0)
1038 error (_("Can't detach %s: %s"), target_pid_to_str (lp
->ptid
),
1039 safe_strerror (errno
));
1041 if (debug_linux_nat
)
1042 fprintf_unfiltered (gdb_stdlog
,
1043 "PTRACE_DETACH (%s, %s, 0) (OK)\n",
1044 target_pid_to_str (lp
->ptid
),
1045 strsignal (WSTOPSIG (lp
->status
)));
1047 delete_lwp (lp
->ptid
);
1054 linux_nat_detach (char *args
, int from_tty
)
1056 iterate_over_lwps (detach_callback
, NULL
);
1058 /* Only the initial process should be left right now. */
1059 gdb_assert (num_lwps
== 1);
1061 trap_ptid
= null_ptid
;
1063 /* Destroy LWP info; it's no longer valid. */
1066 /* Restore the original signal mask. */
1067 sigprocmask (SIG_SETMASK
, &normal_mask
, NULL
);
1068 sigemptyset (&blocked_mask
);
1070 inferior_ptid
= pid_to_ptid (GET_PID (inferior_ptid
));
1071 linux_ops
->to_detach (args
, from_tty
);
1077 resume_callback (struct lwp_info
*lp
, void *data
)
1079 if (lp
->stopped
&& lp
->status
== 0)
1081 struct thread_info
*tp
;
1083 linux_ops
->to_resume (pid_to_ptid (GET_LWP (lp
->ptid
)),
1084 0, TARGET_SIGNAL_0
);
1085 if (debug_linux_nat
)
1086 fprintf_unfiltered (gdb_stdlog
,
1087 "RC: PTRACE_CONT %s, 0, 0 (resume sibling)\n",
1088 target_pid_to_str (lp
->ptid
));
1097 resume_clear_callback (struct lwp_info
*lp
, void *data
)
1104 resume_set_callback (struct lwp_info
*lp
, void *data
)
1111 linux_nat_resume (ptid_t ptid
, int step
, enum target_signal signo
)
1113 struct lwp_info
*lp
;
1116 if (debug_linux_nat
)
1117 fprintf_unfiltered (gdb_stdlog
,
1118 "LLR: Preparing to %s %s, %s, inferior_ptid %s\n",
1119 step
? "step" : "resume",
1120 target_pid_to_str (ptid
),
1121 signo
? strsignal (signo
) : "0",
1122 target_pid_to_str (inferior_ptid
));
1126 /* A specific PTID means `step only this process id'. */
1127 resume_all
= (PIDGET (ptid
) == -1);
1130 iterate_over_lwps (resume_set_callback
, NULL
);
1132 iterate_over_lwps (resume_clear_callback
, NULL
);
1134 /* If PID is -1, it's the current inferior that should be
1135 handled specially. */
1136 if (PIDGET (ptid
) == -1)
1137 ptid
= inferior_ptid
;
1139 lp
= find_lwp_pid (ptid
);
1142 ptid
= pid_to_ptid (GET_LWP (lp
->ptid
));
1144 /* Remember if we're stepping. */
1147 /* Mark this LWP as resumed. */
1150 /* If we have a pending wait status for this thread, there is no
1151 point in resuming the process. But first make sure that
1152 linux_nat_wait won't preemptively handle the event - we
1153 should never take this short-circuit if we are going to
1154 leave LP running, since we have skipped resuming all the
1155 other threads. This bit of code needs to be synchronized
1156 with linux_nat_wait. */
1158 if (lp
->status
&& WIFSTOPPED (lp
->status
))
1160 int saved_signo
= target_signal_from_host (WSTOPSIG (lp
->status
));
1162 if (signal_stop_state (saved_signo
) == 0
1163 && signal_print_state (saved_signo
) == 0
1164 && signal_pass_state (saved_signo
) == 1)
1166 if (debug_linux_nat
)
1167 fprintf_unfiltered (gdb_stdlog
,
1168 "LLR: Not short circuiting for ignored "
1169 "status 0x%x\n", lp
->status
);
1171 /* FIXME: What should we do if we are supposed to continue
1172 this thread with a signal? */
1173 gdb_assert (signo
== TARGET_SIGNAL_0
);
1174 signo
= saved_signo
;
1181 /* FIXME: What should we do if we are supposed to continue
1182 this thread with a signal? */
1183 gdb_assert (signo
== TARGET_SIGNAL_0
);
1185 if (debug_linux_nat
)
1186 fprintf_unfiltered (gdb_stdlog
,
1187 "LLR: Short circuiting for status 0x%x\n",
1193 /* Mark LWP as not stopped to prevent it from being continued by
1199 iterate_over_lwps (resume_callback
, NULL
);
1201 linux_ops
->to_resume (ptid
, step
, signo
);
1202 if (debug_linux_nat
)
1203 fprintf_unfiltered (gdb_stdlog
,
1204 "LLR: %s %s, %s (resume event thread)\n",
1205 step
? "PTRACE_SINGLESTEP" : "PTRACE_CONT",
1206 target_pid_to_str (ptid
),
1207 signo
? strsignal (signo
) : "0");
1210 /* Issue kill to specified lwp. */
1212 static int tkill_failed
;
1215 kill_lwp (int lwpid
, int signo
)
1219 /* Use tkill, if possible, in case we are using nptl threads. If tkill
1220 fails, then we are not using nptl threads and we should be using kill. */
1222 #ifdef HAVE_TKILL_SYSCALL
1225 int ret
= syscall (__NR_tkill
, lwpid
, signo
);
1226 if (errno
!= ENOSYS
)
1233 return kill (lwpid
, signo
);
1236 /* Handle a GNU/Linux extended wait response. If we see a clone
1237 event, we need to add the new LWP to our list (and not report the
1238 trap to higher layers). This function returns non-zero if the
1239 event should be ignored and we should wait again. If STOPPING is
1240 true, the new LWP remains stopped, otherwise it is continued. */
1243 linux_handle_extended_wait (struct lwp_info
*lp
, int status
,
1246 int pid
= GET_LWP (lp
->ptid
);
1247 struct target_waitstatus
*ourstatus
= &lp
->waitstatus
;
1248 struct lwp_info
*new_lp
= NULL
;
1249 int event
= status
>> 16;
1251 if (event
== PTRACE_EVENT_FORK
|| event
== PTRACE_EVENT_VFORK
1252 || event
== PTRACE_EVENT_CLONE
)
1254 unsigned long new_pid
;
1257 ptrace (PTRACE_GETEVENTMSG
, pid
, 0, &new_pid
);
1259 /* If we haven't already seen the new PID stop, wait for it now. */
1260 if (! pull_pid_from_list (&stopped_pids
, new_pid
, &status
))
1262 /* The new child has a pending SIGSTOP. We can't affect it until it
1263 hits the SIGSTOP, but we're already attached. */
1264 ret
= my_waitpid (new_pid
, &status
,
1265 (event
== PTRACE_EVENT_CLONE
) ? __WCLONE
: 0);
1267 perror_with_name (_("waiting for new child"));
1268 else if (ret
!= new_pid
)
1269 internal_error (__FILE__
, __LINE__
,
1270 _("wait returned unexpected PID %d"), ret
);
1271 else if (!WIFSTOPPED (status
))
1272 internal_error (__FILE__
, __LINE__
,
1273 _("wait returned unexpected status 0x%x"), status
);
1276 ourstatus
->value
.related_pid
= new_pid
;
1278 if (event
== PTRACE_EVENT_FORK
)
1279 ourstatus
->kind
= TARGET_WAITKIND_FORKED
;
1280 else if (event
== PTRACE_EVENT_VFORK
)
1281 ourstatus
->kind
= TARGET_WAITKIND_VFORKED
;
1284 ourstatus
->kind
= TARGET_WAITKIND_IGNORE
;
1285 new_lp
= add_lwp (BUILD_LWP (new_pid
, GET_PID (inferior_ptid
)));
1288 if (WSTOPSIG (status
) != SIGSTOP
)
1290 /* This can happen if someone starts sending signals to
1291 the new thread before it gets a chance to run, which
1292 have a lower number than SIGSTOP (e.g. SIGUSR1).
1293 This is an unlikely case, and harder to handle for
1294 fork / vfork than for clone, so we do not try - but
1295 we handle it for clone events here. We'll send
1296 the other signal on to the thread below. */
1298 new_lp
->signalled
= 1;
1304 new_lp
->stopped
= 1;
1307 new_lp
->resumed
= 1;
1308 ptrace (PTRACE_CONT
, lp
->waitstatus
.value
.related_pid
, 0,
1309 status
? WSTOPSIG (status
) : 0);
1312 if (debug_linux_nat
)
1313 fprintf_unfiltered (gdb_stdlog
,
1314 "LHEW: Got clone event from LWP %ld, resuming\n",
1315 GET_LWP (lp
->ptid
));
1316 ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0, 0);
1324 if (event
== PTRACE_EVENT_EXEC
)
1326 ourstatus
->kind
= TARGET_WAITKIND_EXECD
;
1327 ourstatus
->value
.execd_pathname
1328 = xstrdup (child_pid_to_exec_file (pid
));
1330 if (linux_parent_pid
)
1332 detach_breakpoints (linux_parent_pid
);
1333 ptrace (PTRACE_DETACH
, linux_parent_pid
, 0, 0);
1335 linux_parent_pid
= 0;
1341 internal_error (__FILE__
, __LINE__
,
1342 _("unknown ptrace event %d"), event
);
1345 /* Wait for LP to stop. Returns the wait status, or 0 if the LWP has
1349 wait_lwp (struct lwp_info
*lp
)
1353 int thread_dead
= 0;
1355 gdb_assert (!lp
->stopped
);
1356 gdb_assert (lp
->status
== 0);
1358 pid
= my_waitpid (GET_LWP (lp
->ptid
), &status
, 0);
1359 if (pid
== -1 && errno
== ECHILD
)
1361 pid
= my_waitpid (GET_LWP (lp
->ptid
), &status
, __WCLONE
);
1362 if (pid
== -1 && errno
== ECHILD
)
1364 /* The thread has previously exited. We need to delete it
1365 now because, for some vendor 2.4 kernels with NPTL
1366 support backported, there won't be an exit event unless
1367 it is the main thread. 2.6 kernels will report an exit
1368 event for each thread that exits, as expected. */
1370 if (debug_linux_nat
)
1371 fprintf_unfiltered (gdb_stdlog
, "WL: %s vanished.\n",
1372 target_pid_to_str (lp
->ptid
));
1378 gdb_assert (pid
== GET_LWP (lp
->ptid
));
1380 if (debug_linux_nat
)
1382 fprintf_unfiltered (gdb_stdlog
,
1383 "WL: waitpid %s received %s\n",
1384 target_pid_to_str (lp
->ptid
),
1385 status_to_str (status
));
1389 /* Check if the thread has exited. */
1390 if (WIFEXITED (status
) || WIFSIGNALED (status
))
1393 if (debug_linux_nat
)
1394 fprintf_unfiltered (gdb_stdlog
, "WL: %s exited.\n",
1395 target_pid_to_str (lp
->ptid
));
1404 gdb_assert (WIFSTOPPED (status
));
1406 /* Handle GNU/Linux's extended waitstatus for trace events. */
1407 if (WIFSTOPPED (status
) && WSTOPSIG (status
) == SIGTRAP
&& status
>> 16 != 0)
1409 if (debug_linux_nat
)
1410 fprintf_unfiltered (gdb_stdlog
,
1411 "WL: Handling extended status 0x%06x\n",
1413 if (linux_handle_extended_wait (lp
, status
, 1))
1414 return wait_lwp (lp
);
1420 /* Send a SIGSTOP to LP. */
1423 stop_callback (struct lwp_info
*lp
, void *data
)
1425 if (!lp
->stopped
&& !lp
->signalled
)
1429 if (debug_linux_nat
)
1431 fprintf_unfiltered (gdb_stdlog
,
1432 "SC: kill %s **<SIGSTOP>**\n",
1433 target_pid_to_str (lp
->ptid
));
1436 ret
= kill_lwp (GET_LWP (lp
->ptid
), SIGSTOP
);
1437 if (debug_linux_nat
)
1439 fprintf_unfiltered (gdb_stdlog
,
1440 "SC: lwp kill %d %s\n",
1442 errno
? safe_strerror (errno
) : "ERRNO-OK");
1446 gdb_assert (lp
->status
== 0);
1452 /* Wait until LP is stopped. If DATA is non-null it is interpreted as
1453 a pointer to a set of signals to be flushed immediately. */
1456 stop_wait_callback (struct lwp_info
*lp
, void *data
)
1458 sigset_t
*flush_mask
= data
;
1464 status
= wait_lwp (lp
);
1468 /* Ignore any signals in FLUSH_MASK. */
1469 if (flush_mask
&& sigismember (flush_mask
, WSTOPSIG (status
)))
1478 ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0, 0);
1479 if (debug_linux_nat
)
1480 fprintf_unfiltered (gdb_stdlog
,
1481 "PTRACE_CONT %s, 0, 0 (%s)\n",
1482 target_pid_to_str (lp
->ptid
),
1483 errno
? safe_strerror (errno
) : "OK");
1485 return stop_wait_callback (lp
, flush_mask
);
1488 if (WSTOPSIG (status
) != SIGSTOP
)
1490 if (WSTOPSIG (status
) == SIGTRAP
)
1492 /* If a LWP other than the LWP that we're reporting an
1493 event for has hit a GDB breakpoint (as opposed to
1494 some random trap signal), then just arrange for it to
1495 hit it again later. We don't keep the SIGTRAP status
1496 and don't forward the SIGTRAP signal to the LWP. We
1497 will handle the current event, eventually we will
1498 resume all LWPs, and this one will get its breakpoint
1501 If we do not do this, then we run the risk that the
1502 user will delete or disable the breakpoint, but the
1503 thread will have already tripped on it. */
1505 /* Now resume this LWP and get the SIGSTOP event. */
1507 ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0, 0);
1508 if (debug_linux_nat
)
1510 fprintf_unfiltered (gdb_stdlog
,
1511 "PTRACE_CONT %s, 0, 0 (%s)\n",
1512 target_pid_to_str (lp
->ptid
),
1513 errno
? safe_strerror (errno
) : "OK");
1515 fprintf_unfiltered (gdb_stdlog
,
1516 "SWC: Candidate SIGTRAP event in %s\n",
1517 target_pid_to_str (lp
->ptid
));
1519 /* Hold the SIGTRAP for handling by linux_nat_wait. */
1520 stop_wait_callback (lp
, data
);
1521 /* If there's another event, throw it back into the queue. */
1524 if (debug_linux_nat
)
1526 fprintf_unfiltered (gdb_stdlog
,
1527 "SWC: kill %s, %s\n",
1528 target_pid_to_str (lp
->ptid
),
1529 status_to_str ((int) status
));
1531 kill_lwp (GET_LWP (lp
->ptid
), WSTOPSIG (lp
->status
));
1533 /* Save the sigtrap event. */
1534 lp
->status
= status
;
1539 /* The thread was stopped with a signal other than
1540 SIGSTOP, and didn't accidentally trip a breakpoint. */
1542 if (debug_linux_nat
)
1544 fprintf_unfiltered (gdb_stdlog
,
1545 "SWC: Pending event %s in %s\n",
1546 status_to_str ((int) status
),
1547 target_pid_to_str (lp
->ptid
));
1549 /* Now resume this LWP and get the SIGSTOP event. */
1551 ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0, 0);
1552 if (debug_linux_nat
)
1553 fprintf_unfiltered (gdb_stdlog
,
1554 "SWC: PTRACE_CONT %s, 0, 0 (%s)\n",
1555 target_pid_to_str (lp
->ptid
),
1556 errno
? safe_strerror (errno
) : "OK");
1558 /* Hold this event/waitstatus while we check to see if
1559 there are any more (we still want to get that SIGSTOP). */
1560 stop_wait_callback (lp
, data
);
1561 /* If the lp->status field is still empty, use it to hold
1562 this event. If not, then this event must be returned
1563 to the event queue of the LWP. */
1564 if (lp
->status
== 0)
1565 lp
->status
= status
;
1568 if (debug_linux_nat
)
1570 fprintf_unfiltered (gdb_stdlog
,
1571 "SWC: kill %s, %s\n",
1572 target_pid_to_str (lp
->ptid
),
1573 status_to_str ((int) status
));
1575 kill_lwp (GET_LWP (lp
->ptid
), WSTOPSIG (status
));
1582 /* We caught the SIGSTOP that we intended to catch, so
1583 there's no SIGSTOP pending. */
1592 /* Check whether PID has any pending signals in FLUSH_MASK. If so set
1593 the appropriate bits in PENDING, and return 1 - otherwise return 0. */
1596 linux_nat_has_pending (int pid
, sigset_t
*pending
, sigset_t
*flush_mask
)
1598 sigset_t blocked
, ignored
;
1601 linux_proc_pending_signals (pid
, pending
, &blocked
, &ignored
);
1606 for (i
= 1; i
< NSIG
; i
++)
1607 if (sigismember (pending
, i
))
1608 if (!sigismember (flush_mask
, i
)
1609 || sigismember (&blocked
, i
)
1610 || sigismember (&ignored
, i
))
1611 sigdelset (pending
, i
);
1613 if (sigisemptyset (pending
))
1619 /* DATA is interpreted as a mask of signals to flush. If LP has
1620 signals pending, and they are all in the flush mask, then arrange
1621 to flush them. LP should be stopped, as should all other threads
1622 it might share a signal queue with. */
1625 flush_callback (struct lwp_info
*lp
, void *data
)
1627 sigset_t
*flush_mask
= data
;
1628 sigset_t pending
, intersection
, blocked
, ignored
;
1631 /* Normally, when an LWP exits, it is removed from the LWP list. The
1632 last LWP isn't removed till later, however. So if there is only
1633 one LWP on the list, make sure it's alive. */
1634 if (lwp_list
== lp
&& lp
->next
== NULL
)
1635 if (!linux_nat_thread_alive (lp
->ptid
))
1638 /* Just because the LWP is stopped doesn't mean that new signals
1639 can't arrive from outside, so this function must be careful of
1640 race conditions. However, because all threads are stopped, we
1641 can assume that the pending mask will not shrink unless we resume
1642 the LWP, and that it will then get another signal. We can't
1643 control which one, however. */
1647 if (debug_linux_nat
)
1648 printf_unfiltered (_("FC: LP has pending status %06x\n"), lp
->status
);
1649 if (WIFSTOPPED (lp
->status
) && sigismember (flush_mask
, WSTOPSIG (lp
->status
)))
1653 /* While there is a pending signal we would like to flush, continue
1654 the inferior and collect another signal. But if there's already
1655 a saved status that we don't want to flush, we can't resume the
1656 inferior - if it stopped for some other reason we wouldn't have
1657 anywhere to save the new status. In that case, we must leave the
1658 signal unflushed (and possibly generate an extra SIGINT stop).
1659 That's much less bad than losing a signal. */
1660 while (lp
->status
== 0
1661 && linux_nat_has_pending (GET_LWP (lp
->ptid
), &pending
, flush_mask
))
1666 ret
= ptrace (PTRACE_CONT
, GET_LWP (lp
->ptid
), 0, 0);
1667 if (debug_linux_nat
)
1668 fprintf_unfiltered (gdb_stderr
,
1669 "FC: Sent PTRACE_CONT, ret %d %d\n", ret
, errno
);
1672 stop_wait_callback (lp
, flush_mask
);
1673 if (debug_linux_nat
)
1674 fprintf_unfiltered (gdb_stderr
,
1675 "FC: Wait finished; saved status is %d\n",
1682 /* Return non-zero if LP has a wait status pending. */
1685 status_callback (struct lwp_info
*lp
, void *data
)
1687 /* Only report a pending wait status if we pretend that this has
1688 indeed been resumed. */
1689 return (lp
->status
!= 0 && lp
->resumed
);
1692 /* Return non-zero if LP isn't stopped. */
1695 running_callback (struct lwp_info
*lp
, void *data
)
1697 return (lp
->stopped
== 0 || (lp
->status
!= 0 && lp
->resumed
));
1700 /* Count the LWP's that have had events. */
1703 count_events_callback (struct lwp_info
*lp
, void *data
)
1707 gdb_assert (count
!= NULL
);
1709 /* Count only LWPs that have a SIGTRAP event pending. */
1711 && WIFSTOPPED (lp
->status
) && WSTOPSIG (lp
->status
) == SIGTRAP
)
1717 /* Select the LWP (if any) that is currently being single-stepped. */
1720 select_singlestep_lwp_callback (struct lwp_info
*lp
, void *data
)
1722 if (lp
->step
&& lp
->status
!= 0)
1728 /* Select the Nth LWP that has had a SIGTRAP event. */
1731 select_event_lwp_callback (struct lwp_info
*lp
, void *data
)
1733 int *selector
= data
;
1735 gdb_assert (selector
!= NULL
);
1737 /* Select only LWPs that have a SIGTRAP event pending. */
1739 && WIFSTOPPED (lp
->status
) && WSTOPSIG (lp
->status
) == SIGTRAP
)
1740 if ((*selector
)-- == 0)
1747 cancel_breakpoints_callback (struct lwp_info
*lp
, void *data
)
1749 struct lwp_info
*event_lp
= data
;
1751 /* Leave the LWP that has been elected to receive a SIGTRAP alone. */
1755 /* If a LWP other than the LWP that we're reporting an event for has
1756 hit a GDB breakpoint (as opposed to some random trap signal),
1757 then just arrange for it to hit it again later. We don't keep
1758 the SIGTRAP status and don't forward the SIGTRAP signal to the
1759 LWP. We will handle the current event, eventually we will resume
1760 all LWPs, and this one will get its breakpoint trap again.
1762 If we do not do this, then we run the risk that the user will
1763 delete or disable the breakpoint, but the LWP will have already
1767 && WIFSTOPPED (lp
->status
) && WSTOPSIG (lp
->status
) == SIGTRAP
1768 && breakpoint_inserted_here_p (read_pc_pid (lp
->ptid
) -
1769 DECR_PC_AFTER_BREAK
))
1771 if (debug_linux_nat
)
1772 fprintf_unfiltered (gdb_stdlog
,
1773 "CBC: Push back breakpoint for %s\n",
1774 target_pid_to_str (lp
->ptid
));
1776 /* Back up the PC if necessary. */
1777 if (DECR_PC_AFTER_BREAK
)
1778 write_pc_pid (read_pc_pid (lp
->ptid
) - DECR_PC_AFTER_BREAK
, lp
->ptid
);
1780 /* Throw away the SIGTRAP. */
1787 /* Select one LWP out of those that have events pending. */
1790 select_event_lwp (struct lwp_info
**orig_lp
, int *status
)
1793 int random_selector
;
1794 struct lwp_info
*event_lp
;
1796 /* Record the wait status for the original LWP. */
1797 (*orig_lp
)->status
= *status
;
1799 /* Give preference to any LWP that is being single-stepped. */
1800 event_lp
= iterate_over_lwps (select_singlestep_lwp_callback
, NULL
);
1801 if (event_lp
!= NULL
)
1803 if (debug_linux_nat
)
1804 fprintf_unfiltered (gdb_stdlog
,
1805 "SEL: Select single-step %s\n",
1806 target_pid_to_str (event_lp
->ptid
));
1810 /* No single-stepping LWP. Select one at random, out of those
1811 which have had SIGTRAP events. */
1813 /* First see how many SIGTRAP events we have. */
1814 iterate_over_lwps (count_events_callback
, &num_events
);
1816 /* Now randomly pick a LWP out of those that have had a SIGTRAP. */
1817 random_selector
= (int)
1818 ((num_events
* (double) rand ()) / (RAND_MAX
+ 1.0));
1820 if (debug_linux_nat
&& num_events
> 1)
1821 fprintf_unfiltered (gdb_stdlog
,
1822 "SEL: Found %d SIGTRAP events, selecting #%d\n",
1823 num_events
, random_selector
);
1825 event_lp
= iterate_over_lwps (select_event_lwp_callback
,
1829 if (event_lp
!= NULL
)
1831 /* Switch the event LWP. */
1832 *orig_lp
= event_lp
;
1833 *status
= event_lp
->status
;
1836 /* Flush the wait status for the event LWP. */
1837 (*orig_lp
)->status
= 0;
1840 /* Return non-zero if LP has been resumed. */
1843 resumed_callback (struct lwp_info
*lp
, void *data
)
1848 /* Stop an active thread, verify it still exists, then resume it. */
1851 stop_and_resume_callback (struct lwp_info
*lp
, void *data
)
1853 struct lwp_info
*ptr
;
1855 if (!lp
->stopped
&& !lp
->signalled
)
1857 stop_callback (lp
, NULL
);
1858 stop_wait_callback (lp
, NULL
);
1859 /* Resume if the lwp still exists. */
1860 for (ptr
= lwp_list
; ptr
; ptr
= ptr
->next
)
1863 resume_callback (lp
, NULL
);
1864 resume_set_callback (lp
, NULL
);
1871 linux_nat_wait (ptid_t ptid
, struct target_waitstatus
*ourstatus
)
1873 struct lwp_info
*lp
= NULL
;
1876 pid_t pid
= PIDGET (ptid
);
1877 sigset_t flush_mask
;
1879 /* The first time we get here after starting a new inferior, we may
1880 not have added it to the LWP list yet - this is the earliest
1881 moment at which we know its PID. */
1884 gdb_assert (!is_lwp (inferior_ptid
));
1886 inferior_ptid
= BUILD_LWP (GET_PID (inferior_ptid
),
1887 GET_PID (inferior_ptid
));
1888 lp
= add_lwp (inferior_ptid
);
1892 sigemptyset (&flush_mask
);
1894 /* Make sure SIGCHLD is blocked. */
1895 if (!sigismember (&blocked_mask
, SIGCHLD
))
1897 sigaddset (&blocked_mask
, SIGCHLD
);
1898 sigprocmask (SIG_BLOCK
, &blocked_mask
, NULL
);
1903 /* Make sure there is at least one LWP that has been resumed. */
1904 gdb_assert (iterate_over_lwps (resumed_callback
, NULL
));
1906 /* First check if there is a LWP with a wait status pending. */
1909 /* Any LWP that's been resumed will do. */
1910 lp
= iterate_over_lwps (status_callback
, NULL
);
1913 status
= lp
->status
;
1916 if (debug_linux_nat
&& status
)
1917 fprintf_unfiltered (gdb_stdlog
,
1918 "LLW: Using pending wait status %s for %s.\n",
1919 status_to_str (status
),
1920 target_pid_to_str (lp
->ptid
));
1923 /* But if we don't fine one, we'll have to wait, and check both
1924 cloned and uncloned processes. We start with the cloned
1926 options
= __WCLONE
| WNOHANG
;
1928 else if (is_lwp (ptid
))
1930 if (debug_linux_nat
)
1931 fprintf_unfiltered (gdb_stdlog
,
1932 "LLW: Waiting for specific LWP %s.\n",
1933 target_pid_to_str (ptid
));
1935 /* We have a specific LWP to check. */
1936 lp
= find_lwp_pid (ptid
);
1938 status
= lp
->status
;
1941 if (debug_linux_nat
&& status
)
1942 fprintf_unfiltered (gdb_stdlog
,
1943 "LLW: Using pending wait status %s for %s.\n",
1944 status_to_str (status
),
1945 target_pid_to_str (lp
->ptid
));
1947 /* If we have to wait, take into account whether PID is a cloned
1948 process or not. And we have to convert it to something that
1949 the layer beneath us can understand. */
1950 options
= lp
->cloned
? __WCLONE
: 0;
1951 pid
= GET_LWP (ptid
);
1954 if (status
&& lp
->signalled
)
1956 /* A pending SIGSTOP may interfere with the normal stream of
1957 events. In a typical case where interference is a problem,
1958 we have a SIGSTOP signal pending for LWP A while
1959 single-stepping it, encounter an event in LWP B, and take the
1960 pending SIGSTOP while trying to stop LWP A. After processing
1961 the event in LWP B, LWP A is continued, and we'll never see
1962 the SIGTRAP associated with the last time we were
1963 single-stepping LWP A. */
1965 /* Resume the thread. It should halt immediately returning the
1967 registers_changed ();
1968 linux_ops
->to_resume (pid_to_ptid (GET_LWP (lp
->ptid
)),
1969 lp
->step
, TARGET_SIGNAL_0
);
1970 if (debug_linux_nat
)
1971 fprintf_unfiltered (gdb_stdlog
,
1972 "LLW: %s %s, 0, 0 (expect SIGSTOP)\n",
1973 lp
->step
? "PTRACE_SINGLESTEP" : "PTRACE_CONT",
1974 target_pid_to_str (lp
->ptid
));
1976 gdb_assert (lp
->resumed
);
1978 /* This should catch the pending SIGSTOP. */
1979 stop_wait_callback (lp
, NULL
);
1982 set_sigint_trap (); /* Causes SIGINT to be passed on to the
1983 attached process. */
1990 lwpid
= my_waitpid (pid
, &status
, options
);
1993 gdb_assert (pid
== -1 || lwpid
== pid
);
1995 if (debug_linux_nat
)
1997 fprintf_unfiltered (gdb_stdlog
,
1998 "LLW: waitpid %ld received %s\n",
1999 (long) lwpid
, status_to_str (status
));
2002 lp
= find_lwp_pid (pid_to_ptid (lwpid
));
2004 /* Check for stop events reported by a process we didn't
2005 already know about - anything not already in our LWP
2008 If we're expecting to receive stopped processes after
2009 fork, vfork, and clone events, then we'll just add the
2010 new one to our list and go back to waiting for the event
2011 to be reported - the stopped process might be returned
2012 from waitpid before or after the event is. */
2013 if (WIFSTOPPED (status
) && !lp
)
2015 linux_record_stopped_pid (lwpid
, status
);
2020 /* Make sure we don't report an event for the exit of an LWP not in
2021 our list, i.e. not part of the current process. This can happen
2022 if we detach from a program we original forked and then it
2024 if (!WIFSTOPPED (status
) && !lp
)
2030 /* NOTE drow/2003-06-17: This code seems to be meant for debugging
2031 CLONE_PTRACE processes which do not use the thread library -
2032 otherwise we wouldn't find the new LWP this way. That doesn't
2033 currently work, and the following code is currently unreachable
2034 due to the two blocks above. If it's fixed some day, this code
2035 should be broken out into a function so that we can also pick up
2036 LWPs from the new interface. */
2039 lp
= add_lwp (BUILD_LWP (lwpid
, GET_PID (inferior_ptid
)));
2040 if (options
& __WCLONE
)
2043 gdb_assert (WIFSTOPPED (status
)
2044 && WSTOPSIG (status
) == SIGSTOP
);
2047 if (!in_thread_list (inferior_ptid
))
2049 inferior_ptid
= BUILD_LWP (GET_PID (inferior_ptid
),
2050 GET_PID (inferior_ptid
));
2051 add_thread (inferior_ptid
);
2054 add_thread (lp
->ptid
);
2055 printf_unfiltered (_("[New %s]\n"),
2056 target_pid_to_str (lp
->ptid
));
2059 /* Handle GNU/Linux's extended waitstatus for trace events. */
2060 if (WIFSTOPPED (status
) && WSTOPSIG (status
) == SIGTRAP
&& status
>> 16 != 0)
2062 if (debug_linux_nat
)
2063 fprintf_unfiltered (gdb_stdlog
,
2064 "LLW: Handling extended status 0x%06x\n",
2066 if (linux_handle_extended_wait (lp
, status
, 0))
2073 /* Check if the thread has exited. */
2074 if ((WIFEXITED (status
) || WIFSIGNALED (status
)) && num_lwps
> 1)
2076 /* If this is the main thread, we must stop all threads and
2077 verify if they are still alive. This is because in the nptl
2078 thread model, there is no signal issued for exiting LWPs
2079 other than the main thread. We only get the main thread
2080 exit signal once all child threads have already exited.
2081 If we stop all the threads and use the stop_wait_callback
2082 to check if they have exited we can determine whether this
2083 signal should be ignored or whether it means the end of the
2084 debugged application, regardless of which threading model
2086 if (GET_PID (lp
->ptid
) == GET_LWP (lp
->ptid
))
2089 iterate_over_lwps (stop_and_resume_callback
, NULL
);
2092 if (debug_linux_nat
)
2093 fprintf_unfiltered (gdb_stdlog
,
2094 "LLW: %s exited.\n",
2095 target_pid_to_str (lp
->ptid
));
2099 /* If there is at least one more LWP, then the exit signal
2100 was not the end of the debugged application and should be
2104 /* Make sure there is at least one thread running. */
2105 gdb_assert (iterate_over_lwps (running_callback
, NULL
));
2107 /* Discard the event. */
2113 /* Check if the current LWP has previously exited. In the nptl
2114 thread model, LWPs other than the main thread do not issue
2115 signals when they exit so we must check whenever the thread
2116 has stopped. A similar check is made in stop_wait_callback(). */
2117 if (num_lwps
> 1 && !linux_nat_thread_alive (lp
->ptid
))
2119 if (debug_linux_nat
)
2120 fprintf_unfiltered (gdb_stdlog
,
2121 "LLW: %s exited.\n",
2122 target_pid_to_str (lp
->ptid
));
2126 /* Make sure there is at least one thread running. */
2127 gdb_assert (iterate_over_lwps (running_callback
, NULL
));
2129 /* Discard the event. */
2134 /* Make sure we don't report a SIGSTOP that we sent
2135 ourselves in an attempt to stop an LWP. */
2137 && WIFSTOPPED (status
) && WSTOPSIG (status
) == SIGSTOP
)
2139 if (debug_linux_nat
)
2140 fprintf_unfiltered (gdb_stdlog
,
2141 "LLW: Delayed SIGSTOP caught for %s.\n",
2142 target_pid_to_str (lp
->ptid
));
2144 /* This is a delayed SIGSTOP. */
2147 registers_changed ();
2148 linux_ops
->to_resume (pid_to_ptid (GET_LWP (lp
->ptid
)),
2149 lp
->step
, TARGET_SIGNAL_0
);
2150 if (debug_linux_nat
)
2151 fprintf_unfiltered (gdb_stdlog
,
2152 "LLW: %s %s, 0, 0 (discard SIGSTOP)\n",
2154 "PTRACE_SINGLESTEP" : "PTRACE_CONT",
2155 target_pid_to_str (lp
->ptid
));
2158 gdb_assert (lp
->resumed
);
2160 /* Discard the event. */
2170 /* Alternate between checking cloned and uncloned processes. */
2171 options
^= __WCLONE
;
2173 /* And suspend every time we have checked both. */
2174 if (options
& __WCLONE
)
2175 sigsuspend (&suspend_mask
);
2178 /* We shouldn't end up here unless we want to try again. */
2179 gdb_assert (status
== 0);
2182 clear_sigio_trap ();
2183 clear_sigint_trap ();
2187 /* Don't report signals that GDB isn't interested in, such as
2188 signals that are neither printed nor stopped upon. Stopping all
2189 threads can be a bit time-consuming so if we want decent
2190 performance with heavily multi-threaded programs, especially when
2191 they're using a high frequency timer, we'd better avoid it if we
2194 if (WIFSTOPPED (status
))
2196 int signo
= target_signal_from_host (WSTOPSIG (status
));
2198 /* If we get a signal while single-stepping, we may need special
2199 care, e.g. to skip the signal handler. Defer to common code. */
2201 && signal_stop_state (signo
) == 0
2202 && signal_print_state (signo
) == 0
2203 && signal_pass_state (signo
) == 1)
2205 /* FIMXE: kettenis/2001-06-06: Should we resume all threads
2206 here? It is not clear we should. GDB may not expect
2207 other threads to run. On the other hand, not resuming
2208 newly attached threads may cause an unwanted delay in
2209 getting them running. */
2210 registers_changed ();
2211 linux_ops
->to_resume (pid_to_ptid (GET_LWP (lp
->ptid
)),
2213 if (debug_linux_nat
)
2214 fprintf_unfiltered (gdb_stdlog
,
2215 "LLW: %s %s, %s (preempt 'handle')\n",
2217 "PTRACE_SINGLESTEP" : "PTRACE_CONT",
2218 target_pid_to_str (lp
->ptid
),
2219 signo
? strsignal (signo
) : "0");
2225 if (signo
== TARGET_SIGNAL_INT
&& signal_pass_state (signo
) == 0)
2227 /* If ^C/BREAK is typed at the tty/console, SIGINT gets
2228 forwarded to the entire process group, that is, all LWP's
2229 will receive it. Since we only want to report it once,
2230 we try to flush it from all LWPs except this one. */
2231 sigaddset (&flush_mask
, SIGINT
);
2235 /* This LWP is stopped now. */
2238 if (debug_linux_nat
)
2239 fprintf_unfiltered (gdb_stdlog
, "LLW: Candidate event %s in %s.\n",
2240 status_to_str (status
), target_pid_to_str (lp
->ptid
));
2242 /* Now stop all other LWP's ... */
2243 iterate_over_lwps (stop_callback
, NULL
);
2245 /* ... and wait until all of them have reported back that they're no
2247 iterate_over_lwps (stop_wait_callback
, &flush_mask
);
2248 iterate_over_lwps (flush_callback
, &flush_mask
);
2250 /* If we're not waiting for a specific LWP, choose an event LWP from
2251 among those that have had events. Giving equal priority to all
2252 LWPs that have had events helps prevent starvation. */
2254 select_event_lwp (&lp
, &status
);
2256 /* Now that we've selected our final event LWP, cancel any
2257 breakpoints in other LWPs that have hit a GDB breakpoint. See
2258 the comment in cancel_breakpoints_callback to find out why. */
2259 iterate_over_lwps (cancel_breakpoints_callback
, lp
);
2261 if (WIFSTOPPED (status
) && WSTOPSIG (status
) == SIGTRAP
)
2263 trap_ptid
= lp
->ptid
;
2264 if (debug_linux_nat
)
2265 fprintf_unfiltered (gdb_stdlog
,
2266 "LLW: trap_ptid is %s.\n",
2267 target_pid_to_str (trap_ptid
));
2270 trap_ptid
= null_ptid
;
2272 if (lp
->waitstatus
.kind
!= TARGET_WAITKIND_IGNORE
)
2274 *ourstatus
= lp
->waitstatus
;
2275 lp
->waitstatus
.kind
= TARGET_WAITKIND_IGNORE
;
2278 store_waitstatus (ourstatus
, status
);
2284 kill_callback (struct lwp_info
*lp
, void *data
)
2287 ptrace (PTRACE_KILL
, GET_LWP (lp
->ptid
), 0, 0);
2288 if (debug_linux_nat
)
2289 fprintf_unfiltered (gdb_stdlog
,
2290 "KC: PTRACE_KILL %s, 0, 0 (%s)\n",
2291 target_pid_to_str (lp
->ptid
),
2292 errno
? safe_strerror (errno
) : "OK");
2298 kill_wait_callback (struct lwp_info
*lp
, void *data
)
2302 /* We must make sure that there are no pending events (delayed
2303 SIGSTOPs, pending SIGTRAPs, etc.) to make sure the current
2304 program doesn't interfere with any following debugging session. */
2306 /* For cloned processes we must check both with __WCLONE and
2307 without, since the exit status of a cloned process isn't reported
2313 pid
= my_waitpid (GET_LWP (lp
->ptid
), NULL
, __WCLONE
);
2314 if (pid
!= (pid_t
) -1 && debug_linux_nat
)
2316 fprintf_unfiltered (gdb_stdlog
,
2317 "KWC: wait %s received unknown.\n",
2318 target_pid_to_str (lp
->ptid
));
2321 while (pid
== GET_LWP (lp
->ptid
));
2323 gdb_assert (pid
== -1 && errno
== ECHILD
);
2328 pid
= my_waitpid (GET_LWP (lp
->ptid
), NULL
, 0);
2329 if (pid
!= (pid_t
) -1 && debug_linux_nat
)
2331 fprintf_unfiltered (gdb_stdlog
,
2332 "KWC: wait %s received unk.\n",
2333 target_pid_to_str (lp
->ptid
));
2336 while (pid
== GET_LWP (lp
->ptid
));
2338 gdb_assert (pid
== -1 && errno
== ECHILD
);
2343 linux_nat_kill (void)
2345 struct target_waitstatus last
;
2349 /* If we're stopped while forking and we haven't followed yet,
2350 kill the other task. We need to do this first because the
2351 parent will be sleeping if this is a vfork. */
2353 get_last_target_status (&last_ptid
, &last
);
2355 if (last
.kind
== TARGET_WAITKIND_FORKED
2356 || last
.kind
== TARGET_WAITKIND_VFORKED
)
2358 ptrace (PT_KILL
, last
.value
.related_pid
, 0, 0);
2362 if (forks_exist_p ())
2363 linux_fork_killall ();
2366 /* Kill all LWP's ... */
2367 iterate_over_lwps (kill_callback
, NULL
);
2369 /* ... and wait until we've flushed all events. */
2370 iterate_over_lwps (kill_wait_callback
, NULL
);
2373 target_mourn_inferior ();
2377 linux_nat_mourn_inferior (void)
2379 trap_ptid
= null_ptid
;
2381 /* Destroy LWP info; it's no longer valid. */
2384 /* Restore the original signal mask. */
2385 sigprocmask (SIG_SETMASK
, &normal_mask
, NULL
);
2386 sigemptyset (&blocked_mask
);
2388 if (! forks_exist_p ())
2389 /* Normal case, no other forks available. */
2390 linux_ops
->to_mourn_inferior ();
2392 /* Multi-fork case. The current inferior_ptid has exited, but
2393 there are other viable forks to debug. Delete the exiting
2394 one and context-switch to the first available. */
2395 linux_fork_mourn_inferior ();
2399 linux_nat_xfer_partial (struct target_ops
*ops
, enum target_object object
,
2400 const char *annex
, gdb_byte
*readbuf
,
2401 const gdb_byte
*writebuf
,
2402 ULONGEST offset
, LONGEST len
)
2404 struct cleanup
*old_chain
= save_inferior_ptid ();
2407 if (is_lwp (inferior_ptid
))
2408 inferior_ptid
= pid_to_ptid (GET_LWP (inferior_ptid
));
2410 xfer
= linux_ops
->to_xfer_partial (ops
, object
, annex
, readbuf
, writebuf
,
2413 do_cleanups (old_chain
);
2418 linux_nat_thread_alive (ptid_t ptid
)
2420 gdb_assert (is_lwp (ptid
));
2423 ptrace (PTRACE_PEEKUSER
, GET_LWP (ptid
), 0, 0);
2424 if (debug_linux_nat
)
2425 fprintf_unfiltered (gdb_stdlog
,
2426 "LLTA: PTRACE_PEEKUSER %s, 0, 0 (%s)\n",
2427 target_pid_to_str (ptid
),
2428 errno
? safe_strerror (errno
) : "OK");
2430 /* Not every Linux kernel implements PTRACE_PEEKUSER. But we can
2431 handle that case gracefully since ptrace will first do a lookup
2432 for the process based upon the passed-in pid. If that fails we
2433 will get either -ESRCH or -EPERM, otherwise the child exists and
2435 if (errno
== ESRCH
|| errno
== EPERM
)
2442 linux_nat_pid_to_str (ptid_t ptid
)
2444 static char buf
[64];
2446 if (lwp_list
&& lwp_list
->next
&& is_lwp (ptid
))
2448 snprintf (buf
, sizeof (buf
), "LWP %ld", GET_LWP (ptid
));
2452 return normal_pid_to_str (ptid
);
2456 sigchld_handler (int signo
)
2458 /* Do nothing. The only reason for this handler is that it allows
2459 us to use sigsuspend in linux_nat_wait above to wait for the
2460 arrival of a SIGCHLD. */
2463 /* Accepts an integer PID; Returns a string representing a file that
2464 can be opened to get the symbols for the child process. */
2467 child_pid_to_exec_file (int pid
)
2469 char *name1
, *name2
;
2471 name1
= xmalloc (MAXPATHLEN
);
2472 name2
= xmalloc (MAXPATHLEN
);
2473 make_cleanup (xfree
, name1
);
2474 make_cleanup (xfree
, name2
);
2475 memset (name2
, 0, MAXPATHLEN
);
2477 sprintf (name1
, "/proc/%d/exe", pid
);
2478 if (readlink (name1
, name2
, MAXPATHLEN
) > 0)
2484 /* Service function for corefiles and info proc. */
2487 read_mapping (FILE *mapfile
,
2492 char *device
, long long *inode
, char *filename
)
2494 int ret
= fscanf (mapfile
, "%llx-%llx %s %llx %s %llx",
2495 addr
, endaddr
, permissions
, offset
, device
, inode
);
2498 if (ret
> 0 && ret
!= EOF
)
2500 /* Eat everything up to EOL for the filename. This will prevent
2501 weird filenames (such as one with embedded whitespace) from
2502 confusing this code. It also makes this code more robust in
2503 respect to annotations the kernel may add after the filename.
2505 Note the filename is used for informational purposes
2507 ret
+= fscanf (mapfile
, "%[^\n]\n", filename
);
2510 return (ret
!= 0 && ret
!= EOF
);
2513 /* Fills the "to_find_memory_regions" target vector. Lists the memory
2514 regions in the inferior for a corefile. */
2517 linux_nat_find_memory_regions (int (*func
) (CORE_ADDR
,
2519 int, int, int, void *), void *obfd
)
2521 long long pid
= PIDGET (inferior_ptid
);
2522 char mapsfilename
[MAXPATHLEN
];
2524 long long addr
, endaddr
, size
, offset
, inode
;
2525 char permissions
[8], device
[8], filename
[MAXPATHLEN
];
2526 int read
, write
, exec
;
2529 /* Compose the filename for the /proc memory map, and open it. */
2530 sprintf (mapsfilename
, "/proc/%lld/maps", pid
);
2531 if ((mapsfile
= fopen (mapsfilename
, "r")) == NULL
)
2532 error (_("Could not open %s."), mapsfilename
);
2535 fprintf_filtered (gdb_stdout
,
2536 "Reading memory regions from %s\n", mapsfilename
);
2538 /* Now iterate until end-of-file. */
2539 while (read_mapping (mapsfile
, &addr
, &endaddr
, &permissions
[0],
2540 &offset
, &device
[0], &inode
, &filename
[0]))
2542 size
= endaddr
- addr
;
2544 /* Get the segment's permissions. */
2545 read
= (strchr (permissions
, 'r') != 0);
2546 write
= (strchr (permissions
, 'w') != 0);
2547 exec
= (strchr (permissions
, 'x') != 0);
2551 fprintf_filtered (gdb_stdout
,
2552 "Save segment, %lld bytes at 0x%s (%c%c%c)",
2553 size
, paddr_nz (addr
),
2555 write
? 'w' : ' ', exec
? 'x' : ' ');
2557 fprintf_filtered (gdb_stdout
, " for %s", filename
);
2558 fprintf_filtered (gdb_stdout
, "\n");
2561 /* Invoke the callback function to create the corefile
2563 func (addr
, size
, read
, write
, exec
, obfd
);
2569 /* Records the thread's register state for the corefile note
2573 linux_nat_do_thread_registers (bfd
*obfd
, ptid_t ptid
,
2574 char *note_data
, int *note_size
)
2576 gdb_gregset_t gregs
;
2577 gdb_fpregset_t fpregs
;
2578 #ifdef FILL_FPXREGSET
2579 gdb_fpxregset_t fpxregs
;
2581 unsigned long lwp
= ptid_get_lwp (ptid
);
2582 struct gdbarch
*gdbarch
= current_gdbarch
;
2583 const struct regset
*regset
;
2586 core_regset_p
= gdbarch_regset_from_core_section_p (gdbarch
);
2588 && (regset
= gdbarch_regset_from_core_section (gdbarch
, ".reg",
2589 sizeof (gregs
))) != NULL
2590 && regset
->collect_regset
!= NULL
)
2591 regset
->collect_regset (regset
, current_regcache
, -1,
2592 &gregs
, sizeof (gregs
));
2594 fill_gregset (&gregs
, -1);
2596 note_data
= (char *) elfcore_write_prstatus (obfd
,
2600 stop_signal
, &gregs
);
2603 && (regset
= gdbarch_regset_from_core_section (gdbarch
, ".reg2",
2604 sizeof (fpregs
))) != NULL
2605 && regset
->collect_regset
!= NULL
)
2606 regset
->collect_regset (regset
, current_regcache
, -1,
2607 &fpregs
, sizeof (fpregs
));
2609 fill_fpregset (&fpregs
, -1);
2611 note_data
= (char *) elfcore_write_prfpreg (obfd
,
2614 &fpregs
, sizeof (fpregs
));
2616 #ifdef FILL_FPXREGSET
2618 && (regset
= gdbarch_regset_from_core_section (gdbarch
, ".reg-xfp",
2619 sizeof (fpxregs
))) != NULL
2620 && regset
->collect_regset
!= NULL
)
2621 regset
->collect_regset (regset
, current_regcache
, -1,
2622 &fpxregs
, sizeof (fpxregs
));
2624 fill_fpxregset (&fpxregs
, -1);
2626 note_data
= (char *) elfcore_write_prxfpreg (obfd
,
2629 &fpxregs
, sizeof (fpxregs
));
2634 struct linux_nat_corefile_thread_data
2642 /* Called by gdbthread.c once per thread. Records the thread's
2643 register state for the corefile note section. */
2646 linux_nat_corefile_thread_callback (struct lwp_info
*ti
, void *data
)
2648 struct linux_nat_corefile_thread_data
*args
= data
;
2649 ptid_t saved_ptid
= inferior_ptid
;
2651 inferior_ptid
= ti
->ptid
;
2652 registers_changed ();
2653 target_fetch_registers (-1); /* FIXME should not be necessary;
2654 fill_gregset should do it automatically. */
2655 args
->note_data
= linux_nat_do_thread_registers (args
->obfd
,
2660 inferior_ptid
= saved_ptid
;
2661 registers_changed ();
2662 target_fetch_registers (-1); /* FIXME should not be necessary;
2663 fill_gregset should do it automatically. */
2667 /* Records the register state for the corefile note section. */
2670 linux_nat_do_registers (bfd
*obfd
, ptid_t ptid
,
2671 char *note_data
, int *note_size
)
2673 registers_changed ();
2674 target_fetch_registers (-1); /* FIXME should not be necessary;
2675 fill_gregset should do it automatically. */
2676 return linux_nat_do_thread_registers (obfd
,
2677 ptid_build (ptid_get_pid (inferior_ptid
),
2678 ptid_get_pid (inferior_ptid
),
2680 note_data
, note_size
);
2684 /* Fills the "to_make_corefile_note" target vector. Builds the note
2685 section for a corefile, and returns it in a malloc buffer. */
2688 linux_nat_make_corefile_notes (bfd
*obfd
, int *note_size
)
2690 struct linux_nat_corefile_thread_data thread_args
;
2691 struct cleanup
*old_chain
;
2692 char fname
[16] = { '\0' };
2693 char psargs
[80] = { '\0' };
2694 char *note_data
= NULL
;
2695 ptid_t current_ptid
= inferior_ptid
;
2699 if (get_exec_file (0))
2701 strncpy (fname
, strrchr (get_exec_file (0), '/') + 1, sizeof (fname
));
2702 strncpy (psargs
, get_exec_file (0), sizeof (psargs
));
2703 if (get_inferior_args ())
2705 strncat (psargs
, " ", sizeof (psargs
) - strlen (psargs
));
2706 strncat (psargs
, get_inferior_args (),
2707 sizeof (psargs
) - strlen (psargs
));
2709 note_data
= (char *) elfcore_write_prpsinfo (obfd
,
2711 note_size
, fname
, psargs
);
2714 /* Dump information for threads. */
2715 thread_args
.obfd
= obfd
;
2716 thread_args
.note_data
= note_data
;
2717 thread_args
.note_size
= note_size
;
2718 thread_args
.num_notes
= 0;
2719 iterate_over_lwps (linux_nat_corefile_thread_callback
, &thread_args
);
2720 if (thread_args
.num_notes
== 0)
2722 /* iterate_over_threads didn't come up with any threads; just
2723 use inferior_ptid. */
2724 note_data
= linux_nat_do_registers (obfd
, inferior_ptid
,
2725 note_data
, note_size
);
2729 note_data
= thread_args
.note_data
;
2732 auxv_len
= target_read_alloc (¤t_target
, TARGET_OBJECT_AUXV
,
2736 note_data
= elfcore_write_note (obfd
, note_data
, note_size
,
2737 "CORE", NT_AUXV
, auxv
, auxv_len
);
2741 make_cleanup (xfree
, note_data
);
2745 /* Implement the "info proc" command. */
2748 linux_nat_info_proc_cmd (char *args
, int from_tty
)
2750 long long pid
= PIDGET (inferior_ptid
);
2753 char buffer
[MAXPATHLEN
];
2754 char fname1
[MAXPATHLEN
], fname2
[MAXPATHLEN
];
2767 /* Break up 'args' into an argv array. */
2768 if ((argv
= buildargv (args
)) == NULL
)
2771 make_cleanup_freeargv (argv
);
2773 while (argv
!= NULL
&& *argv
!= NULL
)
2775 if (isdigit (argv
[0][0]))
2777 pid
= strtoul (argv
[0], NULL
, 10);
2779 else if (strncmp (argv
[0], "mappings", strlen (argv
[0])) == 0)
2783 else if (strcmp (argv
[0], "status") == 0)
2787 else if (strcmp (argv
[0], "stat") == 0)
2791 else if (strcmp (argv
[0], "cmd") == 0)
2795 else if (strncmp (argv
[0], "exe", strlen (argv
[0])) == 0)
2799 else if (strcmp (argv
[0], "cwd") == 0)
2803 else if (strncmp (argv
[0], "all", strlen (argv
[0])) == 0)
2809 /* [...] (future options here) */
2814 error (_("No current process: you must name one."));
2816 sprintf (fname1
, "/proc/%lld", pid
);
2817 if (stat (fname1
, &dummy
) != 0)
2818 error (_("No /proc directory: '%s'"), fname1
);
2820 printf_filtered (_("process %lld\n"), pid
);
2821 if (cmdline_f
|| all
)
2823 sprintf (fname1
, "/proc/%lld/cmdline", pid
);
2824 if ((procfile
= fopen (fname1
, "r")) != NULL
)
2826 fgets (buffer
, sizeof (buffer
), procfile
);
2827 printf_filtered ("cmdline = '%s'\n", buffer
);
2831 warning (_("unable to open /proc file '%s'"), fname1
);
2835 sprintf (fname1
, "/proc/%lld/cwd", pid
);
2836 memset (fname2
, 0, sizeof (fname2
));
2837 if (readlink (fname1
, fname2
, sizeof (fname2
)) > 0)
2838 printf_filtered ("cwd = '%s'\n", fname2
);
2840 warning (_("unable to read link '%s'"), fname1
);
2844 sprintf (fname1
, "/proc/%lld/exe", pid
);
2845 memset (fname2
, 0, sizeof (fname2
));
2846 if (readlink (fname1
, fname2
, sizeof (fname2
)) > 0)
2847 printf_filtered ("exe = '%s'\n", fname2
);
2849 warning (_("unable to read link '%s'"), fname1
);
2851 if (mappings_f
|| all
)
2853 sprintf (fname1
, "/proc/%lld/maps", pid
);
2854 if ((procfile
= fopen (fname1
, "r")) != NULL
)
2856 long long addr
, endaddr
, size
, offset
, inode
;
2857 char permissions
[8], device
[8], filename
[MAXPATHLEN
];
2859 printf_filtered (_("Mapped address spaces:\n\n"));
2860 if (TARGET_ADDR_BIT
== 32)
2862 printf_filtered ("\t%10s %10s %10s %10s %7s\n",
2865 " Size", " Offset", "objfile");
2869 printf_filtered (" %18s %18s %10s %10s %7s\n",
2872 " Size", " Offset", "objfile");
2875 while (read_mapping (procfile
, &addr
, &endaddr
, &permissions
[0],
2876 &offset
, &device
[0], &inode
, &filename
[0]))
2878 size
= endaddr
- addr
;
2880 /* FIXME: carlton/2003-08-27: Maybe the printf_filtered
2881 calls here (and possibly above) should be abstracted
2882 out into their own functions? Andrew suggests using
2883 a generic local_address_string instead to print out
2884 the addresses; that makes sense to me, too. */
2886 if (TARGET_ADDR_BIT
== 32)
2888 printf_filtered ("\t%#10lx %#10lx %#10x %#10x %7s\n",
2889 (unsigned long) addr
, /* FIXME: pr_addr */
2890 (unsigned long) endaddr
,
2892 (unsigned int) offset
,
2893 filename
[0] ? filename
: "");
2897 printf_filtered (" %#18lx %#18lx %#10x %#10x %7s\n",
2898 (unsigned long) addr
, /* FIXME: pr_addr */
2899 (unsigned long) endaddr
,
2901 (unsigned int) offset
,
2902 filename
[0] ? filename
: "");
2909 warning (_("unable to open /proc file '%s'"), fname1
);
2911 if (status_f
|| all
)
2913 sprintf (fname1
, "/proc/%lld/status", pid
);
2914 if ((procfile
= fopen (fname1
, "r")) != NULL
)
2916 while (fgets (buffer
, sizeof (buffer
), procfile
) != NULL
)
2917 puts_filtered (buffer
);
2921 warning (_("unable to open /proc file '%s'"), fname1
);
2925 sprintf (fname1
, "/proc/%lld/stat", pid
);
2926 if ((procfile
= fopen (fname1
, "r")) != NULL
)
2931 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2932 printf_filtered (_("Process: %d\n"), itmp
);
2933 if (fscanf (procfile
, "%s ", &buffer
[0]) > 0)
2934 printf_filtered (_("Exec file: %s\n"), buffer
);
2935 if (fscanf (procfile
, "%c ", &ctmp
) > 0)
2936 printf_filtered (_("State: %c\n"), ctmp
);
2937 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2938 printf_filtered (_("Parent process: %d\n"), itmp
);
2939 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2940 printf_filtered (_("Process group: %d\n"), itmp
);
2941 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2942 printf_filtered (_("Session id: %d\n"), itmp
);
2943 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2944 printf_filtered (_("TTY: %d\n"), itmp
);
2945 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2946 printf_filtered (_("TTY owner process group: %d\n"), itmp
);
2947 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2948 printf_filtered (_("Flags: 0x%x\n"), itmp
);
2949 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2950 printf_filtered (_("Minor faults (no memory page): %u\n"),
2951 (unsigned int) itmp
);
2952 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2953 printf_filtered (_("Minor faults, children: %u\n"),
2954 (unsigned int) itmp
);
2955 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2956 printf_filtered (_("Major faults (memory page faults): %u\n"),
2957 (unsigned int) itmp
);
2958 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2959 printf_filtered (_("Major faults, children: %u\n"),
2960 (unsigned int) itmp
);
2961 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2962 printf_filtered ("utime: %d\n", itmp
);
2963 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2964 printf_filtered ("stime: %d\n", itmp
);
2965 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2966 printf_filtered ("utime, children: %d\n", itmp
);
2967 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2968 printf_filtered ("stime, children: %d\n", itmp
);
2969 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2970 printf_filtered (_("jiffies remaining in current time slice: %d\n"),
2972 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2973 printf_filtered ("'nice' value: %d\n", itmp
);
2974 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2975 printf_filtered (_("jiffies until next timeout: %u\n"),
2976 (unsigned int) itmp
);
2977 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2978 printf_filtered ("jiffies until next SIGALRM: %u\n",
2979 (unsigned int) itmp
);
2980 if (fscanf (procfile
, "%d ", &itmp
) > 0)
2981 printf_filtered (_("start time (jiffies since system boot): %d\n"),
2983 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2984 printf_filtered (_("Virtual memory size: %u\n"),
2985 (unsigned int) itmp
);
2986 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2987 printf_filtered (_("Resident set size: %u\n"), (unsigned int) itmp
);
2988 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2989 printf_filtered ("rlim: %u\n", (unsigned int) itmp
);
2990 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2991 printf_filtered (_("Start of text: 0x%x\n"), itmp
);
2992 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2993 printf_filtered (_("End of text: 0x%x\n"), itmp
);
2994 if (fscanf (procfile
, "%u ", &itmp
) > 0)
2995 printf_filtered (_("Start of stack: 0x%x\n"), itmp
);
2996 #if 0 /* Don't know how architecture-dependent the rest is...
2997 Anyway the signal bitmap info is available from "status". */
2998 if (fscanf (procfile
, "%u ", &itmp
) > 0) /* FIXME arch? */
2999 printf_filtered (_("Kernel stack pointer: 0x%x\n"), itmp
);
3000 if (fscanf (procfile
, "%u ", &itmp
) > 0) /* FIXME arch? */
3001 printf_filtered (_("Kernel instr pointer: 0x%x\n"), itmp
);
3002 if (fscanf (procfile
, "%d ", &itmp
) > 0)
3003 printf_filtered (_("Pending signals bitmap: 0x%x\n"), itmp
);
3004 if (fscanf (procfile
, "%d ", &itmp
) > 0)
3005 printf_filtered (_("Blocked signals bitmap: 0x%x\n"), itmp
);
3006 if (fscanf (procfile
, "%d ", &itmp
) > 0)
3007 printf_filtered (_("Ignored signals bitmap: 0x%x\n"), itmp
);
3008 if (fscanf (procfile
, "%d ", &itmp
) > 0)
3009 printf_filtered (_("Catched signals bitmap: 0x%x\n"), itmp
);
3010 if (fscanf (procfile
, "%u ", &itmp
) > 0) /* FIXME arch? */
3011 printf_filtered (_("wchan (system call): 0x%x\n"), itmp
);
3016 warning (_("unable to open /proc file '%s'"), fname1
);
3020 /* Implement the to_xfer_partial interface for memory reads using the /proc
3021 filesystem. Because we can use a single read() call for /proc, this
3022 can be much more efficient than banging away at PTRACE_PEEKTEXT,
3023 but it doesn't support writes. */
3026 linux_proc_xfer_partial (struct target_ops
*ops
, enum target_object object
,
3027 const char *annex
, gdb_byte
*readbuf
,
3028 const gdb_byte
*writebuf
,
3029 ULONGEST offset
, LONGEST len
)
3035 if (object
!= TARGET_OBJECT_MEMORY
|| !readbuf
)
3038 /* Don't bother for one word. */
3039 if (len
< 3 * sizeof (long))
3042 /* We could keep this file open and cache it - possibly one per
3043 thread. That requires some juggling, but is even faster. */
3044 sprintf (filename
, "/proc/%d/mem", PIDGET (inferior_ptid
));
3045 fd
= open (filename
, O_RDONLY
| O_LARGEFILE
);
3049 /* If pread64 is available, use it. It's faster if the kernel
3050 supports it (only one syscall), and it's 64-bit safe even on
3051 32-bit platforms (for instance, SPARC debugging a SPARC64
3054 if (pread64 (fd
, readbuf
, len
, offset
) != len
)
3056 if (lseek (fd
, offset
, SEEK_SET
) == -1 || read (fd
, readbuf
, len
) != len
)
3066 /* Parse LINE as a signal set and add its set bits to SIGS. */
3069 add_line_to_sigset (const char *line
, sigset_t
*sigs
)
3071 int len
= strlen (line
) - 1;
3075 if (line
[len
] != '\n')
3076 error (_("Could not parse signal set: %s"), line
);
3084 if (*p
>= '0' && *p
<= '9')
3086 else if (*p
>= 'a' && *p
<= 'f')
3087 digit
= *p
- 'a' + 10;
3089 error (_("Could not parse signal set: %s"), line
);
3094 sigaddset (sigs
, signum
+ 1);
3096 sigaddset (sigs
, signum
+ 2);
3098 sigaddset (sigs
, signum
+ 3);
3100 sigaddset (sigs
, signum
+ 4);
3106 /* Find process PID's pending signals from /proc/pid/status and set
3110 linux_proc_pending_signals (int pid
, sigset_t
*pending
, sigset_t
*blocked
, sigset_t
*ignored
)
3113 char buffer
[MAXPATHLEN
], fname
[MAXPATHLEN
];
3116 sigemptyset (pending
);
3117 sigemptyset (blocked
);
3118 sigemptyset (ignored
);
3119 sprintf (fname
, "/proc/%d/status", pid
);
3120 procfile
= fopen (fname
, "r");
3121 if (procfile
== NULL
)
3122 error (_("Could not open %s"), fname
);
3124 while (fgets (buffer
, MAXPATHLEN
, procfile
) != NULL
)
3126 /* Normal queued signals are on the SigPnd line in the status
3127 file. However, 2.6 kernels also have a "shared" pending
3128 queue for delivering signals to a thread group, so check for
3131 Unfortunately some Red Hat kernels include the shared pending
3132 queue but not the ShdPnd status field. */
3134 if (strncmp (buffer
, "SigPnd:\t", 8) == 0)
3135 add_line_to_sigset (buffer
+ 8, pending
);
3136 else if (strncmp (buffer
, "ShdPnd:\t", 8) == 0)
3137 add_line_to_sigset (buffer
+ 8, pending
);
3138 else if (strncmp (buffer
, "SigBlk:\t", 8) == 0)
3139 add_line_to_sigset (buffer
+ 8, blocked
);
3140 else if (strncmp (buffer
, "SigIgn:\t", 8) == 0)
3141 add_line_to_sigset (buffer
+ 8, ignored
);
3148 linux_xfer_partial (struct target_ops
*ops
, enum target_object object
,
3149 const char *annex
, gdb_byte
*readbuf
,
3150 const gdb_byte
*writebuf
, ULONGEST offset
, LONGEST len
)
3154 if (object
== TARGET_OBJECT_AUXV
)
3155 return procfs_xfer_auxv (ops
, object
, annex
, readbuf
, writebuf
,
3158 xfer
= linux_proc_xfer_partial (ops
, object
, annex
, readbuf
, writebuf
,
3163 return super_xfer_partial (ops
, object
, annex
, readbuf
, writebuf
,
3167 #ifndef FETCH_INFERIOR_REGISTERS
3169 /* Return the address in the core dump or inferior of register
3173 linux_register_u_offset (int regno
)
3175 /* FIXME drow/2005-09-04: The hardcoded use of register_addr should go
3176 away. This requires disentangling the various definitions of it
3177 (particularly alpha-nat.c's). */
3178 return register_addr (regno
, 0);
3183 /* Create a prototype generic Linux target. The client can override
3184 it with local methods. */
3189 struct target_ops
*t
;
3191 #ifdef FETCH_INFERIOR_REGISTERS
3192 t
= inf_ptrace_target ();
3194 t
= inf_ptrace_trad_target (linux_register_u_offset
);
3196 t
->to_insert_fork_catchpoint
= child_insert_fork_catchpoint
;
3197 t
->to_insert_vfork_catchpoint
= child_insert_vfork_catchpoint
;
3198 t
->to_insert_exec_catchpoint
= child_insert_exec_catchpoint
;
3199 t
->to_pid_to_exec_file
= child_pid_to_exec_file
;
3200 t
->to_post_startup_inferior
= linux_child_post_startup_inferior
;
3201 t
->to_post_attach
= child_post_attach
;
3202 t
->to_follow_fork
= child_follow_fork
;
3203 t
->to_find_memory_regions
= linux_nat_find_memory_regions
;
3204 t
->to_make_corefile_notes
= linux_nat_make_corefile_notes
;
3206 super_xfer_partial
= t
->to_xfer_partial
;
3207 t
->to_xfer_partial
= linux_xfer_partial
;
3213 linux_nat_add_target (struct target_ops
*t
)
3215 /* Save the provided single-threaded target. We save this in a separate
3216 variable because another target we've inherited from (e.g. inf-ptrace)
3217 may have saved a pointer to T; we want to use it for the final
3218 process stratum target. */
3219 linux_ops_saved
= *t
;
3220 linux_ops
= &linux_ops_saved
;
3222 /* Override some methods for multithreading. */
3223 t
->to_attach
= linux_nat_attach
;
3224 t
->to_detach
= linux_nat_detach
;
3225 t
->to_resume
= linux_nat_resume
;
3226 t
->to_wait
= linux_nat_wait
;
3227 t
->to_xfer_partial
= linux_nat_xfer_partial
;
3228 t
->to_kill
= linux_nat_kill
;
3229 t
->to_mourn_inferior
= linux_nat_mourn_inferior
;
3230 t
->to_thread_alive
= linux_nat_thread_alive
;
3231 t
->to_pid_to_str
= linux_nat_pid_to_str
;
3232 t
->to_has_thread_control
= tc_schedlock
;
3234 /* We don't change the stratum; this target will sit at
3235 process_stratum and thread_db will set at thread_stratum. This
3236 is a little strange, since this is a multi-threaded-capable
3237 target, but we want to be on the stack below thread_db, and we
3238 also want to be used for single-threaded processes. */
3242 /* TODO: Eliminate this and have libthread_db use
3243 find_target_beneath. */
3248 _initialize_linux_nat (void)
3250 struct sigaction action
;
3252 add_info ("proc", linux_nat_info_proc_cmd
, _("\
3253 Show /proc process information about any running process.\n\
3254 Specify any process id, or use the program being debugged by default.\n\
3255 Specify any of the following keywords for detailed info:\n\
3256 mappings -- list of mapped memory regions.\n\
3257 stat -- list a bunch of random process info.\n\
3258 status -- list a different bunch of random process info.\n\
3259 all -- list all available /proc info."));
3261 /* Save the original signal mask. */
3262 sigprocmask (SIG_SETMASK
, NULL
, &normal_mask
);
3264 action
.sa_handler
= sigchld_handler
;
3265 sigemptyset (&action
.sa_mask
);
3266 action
.sa_flags
= SA_RESTART
;
3267 sigaction (SIGCHLD
, &action
, NULL
);
3269 /* Make sure we don't block SIGCHLD during a sigsuspend. */
3270 sigprocmask (SIG_SETMASK
, NULL
, &suspend_mask
);
3271 sigdelset (&suspend_mask
, SIGCHLD
);
3273 sigemptyset (&blocked_mask
);
3275 add_setshow_zinteger_cmd ("lin-lwp", no_class
, &debug_linux_nat
, _("\
3276 Set debugging of GNU/Linux lwp module."), _("\
3277 Show debugging of GNU/Linux lwp module."), _("\
3278 Enables printf debugging output."),
3280 show_debug_linux_nat
,
3281 &setdebuglist
, &showdebuglist
);
3285 /* FIXME: kettenis/2000-08-26: The stuff on this page is specific to
3286 the GNU/Linux Threads library and therefore doesn't really belong
3289 /* Read variable NAME in the target and return its value if found.
3290 Otherwise return zero. It is assumed that the type of the variable
3294 get_signo (const char *name
)
3296 struct minimal_symbol
*ms
;
3299 ms
= lookup_minimal_symbol (name
, NULL
, NULL
);
3303 if (target_read_memory (SYMBOL_VALUE_ADDRESS (ms
), (gdb_byte
*) &signo
,
3304 sizeof (signo
)) != 0)
3310 /* Return the set of signals used by the threads library in *SET. */
3313 lin_thread_get_thread_signals (sigset_t
*set
)
3315 struct sigaction action
;
3316 int restart
, cancel
;
3320 restart
= get_signo ("__pthread_sig_restart");
3321 cancel
= get_signo ("__pthread_sig_cancel");
3323 /* LinuxThreads normally uses the first two RT signals, but in some legacy
3324 cases may use SIGUSR1/SIGUSR2. NPTL always uses RT signals, but does
3325 not provide any way for the debugger to query the signal numbers -
3326 fortunately they don't change! */
3329 restart
= __SIGRTMIN
;
3332 cancel
= __SIGRTMIN
+ 1;
3334 sigaddset (set
, restart
);
3335 sigaddset (set
, cancel
);
3337 /* The GNU/Linux Threads library makes terminating threads send a
3338 special "cancel" signal instead of SIGCHLD. Make sure we catch
3339 those (to prevent them from terminating GDB itself, which is
3340 likely to be their default action) and treat them the same way as
3343 action
.sa_handler
= sigchld_handler
;
3344 sigemptyset (&action
.sa_mask
);
3345 action
.sa_flags
= SA_RESTART
;
3346 sigaction (cancel
, &action
, NULL
);
3348 /* We block the "cancel" signal throughout this code ... */
3349 sigaddset (&blocked_mask
, cancel
);
3350 sigprocmask (SIG_BLOCK
, &blocked_mask
, NULL
);
3352 /* ... except during a sigsuspend. */
3353 sigdelset (&suspend_mask
, cancel
);