* c-exp.y (exp:STRING): Convert C strings into array-of-char
[deliverable/binutils-gdb.git] / gdb / mipsread.c
1 /* Read a symbol table in MIPS' format (Third-Eye).
2 Copyright 1986, 1987, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 Contributed by Alessandro Forin (af@cs.cmu.edu) at CMU. Major
4 work by Per Bothner and John Gilmore at Cygnus Support.
5
6 This file is part of GDB.
7
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
12
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
17
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
21
22 /* This module provides three functions: mipscoff_symfile_init,
23 which initializes to read a symbol file; mipscoff_new_init, which
24 discards existing cached information when all symbols are being
25 discarded; and mipscoff_symfile_read, which reads a symbol table
26 from a file.
27
28 mipscoff_symfile_read only does the minimum work necessary for letting the
29 user "name" things symbolically; it does not read the entire symtab.
30 Instead, it reads the external and static symbols and puts them in partial
31 symbol tables. When more extensive information is requested of a
32 file, the corresponding partial symbol table is mutated into a full
33 fledged symbol table by going back and reading the symbols
34 for real. mipscoff_psymtab_to_symtab() is called indirectly through
35 a pointer in the psymtab to do this.
36
37 ECOFF symbol tables are mostly written in the byte order of the
38 target machine. However, one section of the table (the auxiliary
39 symbol information) is written in the host byte order. There is a
40 bit in the other symbol info which describes which host byte order
41 was used. ECOFF thereby takes the trophy from Intel `b.out' for
42 the most brain-dead adaptation of a file format to byte order.
43
44 This module can read all four of the known byte-order combinations,
45 on any type of host. However, it does make (and check) the assumption
46 that the external form of a symbol table structure (on disk)
47 occupies the same number of bytes as the internal form (in a struct).
48 Fixing this is possible but requires larger structural changes. */
49
50 #define TM_FILE_OVERRIDE
51 #include "defs.h"
52 #include "tm-mips.h"
53 #include "symtab.h"
54 #include "gdbtypes.h"
55 #include "gdbcore.h"
56 #include "symfile.h"
57 #include "objfiles.h"
58 #include "obstack.h"
59 #include "buildsym.h"
60 #include "stabsread.h"
61 #include "complaints.h"
62
63 #ifdef USG
64 #include <sys/types.h>
65 #define L_SET 0
66 #define L_INCR 1
67 #endif
68
69 #include <sys/param.h>
70 #include <sys/file.h>
71 #include <sys/stat.h>
72 #include <string.h>
73
74 #include "gdb-stabs.h"
75
76 #include "coff/mips.h" /* COFF-like aspects of ecoff files */
77 #include "coff/ecoff-ext.h" /* External forms of ecoff sym structures */
78
79 #include "libbfd.h" /* FIXME Secret internal BFD stuff (bfd_read) */
80 #include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
81 #include "aout/aout64.h"
82 #include "aout/stab_gnu.h" /* STABS information */
83 #include "expression.h"
84 #include "language.h" /* Needed inside partial-stab.h */
85
86 struct coff_exec {
87 struct external_filehdr f;
88 struct external_aouthdr a;
89 };
90
91 /* These must match the corresponding definition in gcc/config/xm-mips.h.
92 At some point, these should probably go into a shared include file,
93 but currently gcc and gdb do not share any directories. */
94
95 #define CODE_MASK 0x8F300
96 #define MIPS_IS_STAB(sym) (((sym)->index & 0xFFF00) == CODE_MASK)
97 #define MIPS_MARK_STAB(code) ((code)+CODE_MASK)
98 #define MIPS_UNMARK_STAB(code) ((code)-CODE_MASK)
99 #define STABS_SYMBOL "@stabs"
100
101 /* Each partial symbol table entry contains a pointer to private data for the
102 read_symtab() function to use when expanding a partial symbol table entry
103 to a full symbol table entry.
104
105 For mipsread this structure contains the index of the FDR that this psymtab
106 represents and a pointer to the symbol table header HDRR from the symbol
107 file that the psymtab was created from. */
108
109 #define PST_PRIVATE(p) ((struct symloc *)(p)->read_symtab_private)
110 #define FDR_IDX(p) (PST_PRIVATE(p)->fdr_idx)
111 #define CUR_HDR(p) (PST_PRIVATE(p)->cur_hdr)
112
113 struct symloc {
114 int fdr_idx;
115 HDRR *cur_hdr;
116 EXTR **extern_tab; /* Pointer to external symbols for this file. */
117 int extern_count; /* Size of extern_tab. */
118 };
119
120 /* Things we import explicitly from other modules */
121
122 extern int info_verbose;
123
124 /* Various complaints about symbol reading that don't abort the process */
125
126 struct complaint bad_file_number_complaint =
127 {"bad file number %d", 0, 0};
128
129 struct complaint index_complaint =
130 {"bad aux index at symbol %s", 0, 0};
131
132 struct complaint aux_index_complaint =
133 {"bad proc end in aux found from symbol %s", 0, 0};
134
135 struct complaint unknown_ext_complaint =
136 {"unknown external symbol %s", 0, 0};
137
138 struct complaint unknown_sym_complaint =
139 {"unknown local symbol %s", 0, 0};
140
141 struct complaint unknown_st_complaint =
142 {"with type %d", 0, 0};
143
144 struct complaint block_overflow_complaint =
145 {"block containing %s overfilled", 0, 0};
146
147 struct complaint basic_type_complaint =
148 {"cannot map MIPS basic type 0x%x", 0, 0};
149
150 struct complaint unknown_type_qual_complaint =
151 {"unknown type qualifier 0x%x", 0, 0};
152
153 struct complaint array_bitsize_complaint =
154 {"size of array target type not known, assuming %d bits", 0, 0};
155
156 struct complaint bad_tag_guess_complaint =
157 {"guessed tag type of %s incorrectly", 0, 0};
158
159 struct complaint block_member_complaint =
160 {"declaration block contains unhandled symbol type %d", 0, 0};
161
162 struct complaint stEnd_complaint =
163 {"stEnd with storage class %d not handled", 0, 0};
164
165 struct complaint unknown_mips_symtype_complaint =
166 {"unknown symbol type 0x%x", 0, 0};
167
168 struct complaint stab_unknown_complaint =
169 {"unknown stabs symbol %s", 0, 0};
170
171 struct complaint pdr_for_nonsymbol_complaint =
172 {"PDR for %s, but no symbol", 0, 0};
173
174 struct complaint pdr_static_symbol_complaint =
175 {"can't handle PDR for static proc at 0x%x", 0, 0};
176
177 /* Macros and extra defs */
178
179 /* Already-parsed symbols are marked specially */
180
181 #define stParsed stType
182
183 /* Puns: hard to find whether -g was used and how */
184
185 #define MIN_GLEVEL GLEVEL_0
186 #define compare_glevel(a,b) \
187 (((a) == GLEVEL_3) ? ((b) < GLEVEL_3) : \
188 ((b) == GLEVEL_3) ? -1 : (int)((b) - (a)))
189
190 /* When looking at .o files, avoid tripping over zero pointers.
191 FIXME; places that use this should be fixed to convert from
192 external to internal format, rather than examining in-place. */
193
194 #define UNSAFE_DATA_ADDR(p) ((p) == 0)
195 \f
196 /* Things that really are local to this module */
197
198 /* Remember what we deduced to be the source language of this psymtab. */
199
200 static enum language psymtab_language = language_unknown;
201
202 /* MIPS symtab header for the current file */
203
204 static HDRR *cur_hdr;
205
206 /* Pointer to current file decriptor record, and its index */
207
208 static FDR *cur_fdr;
209 static int cur_fd;
210
211 /* Index of current symbol */
212
213 static int cur_sdx;
214
215 /* Note how much "debuggable" this image is. We would like
216 to see at least one FDR with full symbols */
217
218 static max_gdbinfo;
219 static max_glevel;
220
221 /* When examining .o files, report on undefined symbols */
222
223 static int n_undef_symbols, n_undef_labels, n_undef_vars, n_undef_procs;
224
225 /* Pseudo symbol to use when putting stabs into the symbol table. */
226
227 static char stabs_symbol[] = STABS_SYMBOL;
228
229 /* Extra builtin types */
230
231 struct type *builtin_type_complex;
232 struct type *builtin_type_double_complex;
233 struct type *builtin_type_fixed_dec;
234 struct type *builtin_type_float_dec;
235 struct type *builtin_type_string;
236
237 /* Forward declarations */
238
239 static void
240 fixup_symtab PARAMS ((HDRR *, char *, file_ptr, bfd *));
241
242 static void
243 read_mips_symtab PARAMS ((struct objfile *, struct section_offsets *));
244
245 static void
246 read_the_mips_symtab PARAMS ((bfd *, CORE_ADDR *));
247
248 static int
249 upgrade_type PARAMS ((struct type **, int, union aux_ext *, int));
250
251 static void
252 parse_partial_symbols PARAMS ((int, struct objfile *,
253 struct section_offsets *));
254
255 static int
256 cross_ref PARAMS ((union aux_ext *, struct type **, enum type_code, char **,
257 int));
258
259 static void
260 fixup_sigtramp PARAMS ((void));
261
262 static struct symbol *
263 new_symbol PARAMS ((char *));
264
265 static struct type *
266 new_type PARAMS ((char *));
267
268 static struct block *
269 new_block PARAMS ((int));
270
271 static struct symtab *
272 new_symtab PARAMS ((char *, int, int, struct objfile *));
273
274 static struct linetable *
275 new_linetable PARAMS ((int));
276
277 static struct blockvector *
278 new_bvect PARAMS ((int));
279
280 static struct type *
281 parse_type PARAMS ((union aux_ext *, int *, int));
282
283 static struct symbol *
284 mylookup_symbol PARAMS ((char *, struct block *, enum namespace,
285 enum address_class));
286
287 static struct block *
288 shrink_block PARAMS ((struct block *, struct symtab *));
289
290 static PTR
291 xzalloc PARAMS ((unsigned int));
292
293 static void
294 sort_blocks PARAMS ((struct symtab *));
295
296 static int
297 compare_blocks PARAMS ((const void *, const void *));
298
299 static struct partial_symtab *
300 new_psymtab PARAMS ((char *, struct objfile *));
301
302 #if 0
303 static struct partial_symtab *
304 parse_fdr PARAMS ((int, int, struct objfile *));
305 #endif
306
307 static void
308 psymtab_to_symtab_1 PARAMS ((struct partial_symtab *, char *));
309
310 static void
311 add_block PARAMS ((struct block *, struct symtab *));
312
313 static void
314 add_symbol PARAMS ((struct symbol *, struct block *));
315
316 static int
317 add_line PARAMS ((struct linetable *, int, CORE_ADDR, int));
318
319 static struct linetable *
320 shrink_linetable PARAMS ((struct linetable *));
321
322 static char *
323 mips_next_symbol_text PARAMS ((void));
324 \f
325 /* Things we export to other modules */
326
327 /* Address bounds for the signal trampoline in inferior, if any */
328 /* FIXME: Nothing really seems to use this. Why is it here? */
329
330 CORE_ADDR sigtramp_address, sigtramp_end;
331
332 static void
333 mipscoff_new_init (ignore)
334 struct objfile *ignore;
335 {
336 }
337
338 static void
339 mipscoff_symfile_init (objfile)
340 struct objfile *objfile;
341 {
342 if (objfile -> sym_private != NULL)
343 {
344 mfree (objfile -> md, objfile -> sym_private);
345 }
346 objfile -> sym_private = NULL;
347 }
348
349 static void
350 mipscoff_symfile_read (objfile, section_offsets, mainline)
351 struct objfile *objfile;
352 struct section_offsets *section_offsets;
353 int mainline;
354 {
355 init_minimal_symbol_collection ();
356 make_cleanup (discard_minimal_symbols, 0);
357
358 /* Now that the executable file is positioned at symbol table,
359 process it and define symbols accordingly. */
360
361 read_mips_symtab(objfile, section_offsets);
362
363 /* Install any minimal symbols that have been collected as the current
364 minimal symbols for this objfile. */
365
366 install_minimal_symbols (objfile);
367 }
368
369 /* Perform any local cleanups required when we are done with a particular
370 objfile. I.E, we are in the process of discarding all symbol information
371 for an objfile, freeing up all memory held for it, and unlinking the
372 objfile struct from the global list of known objfiles. */
373
374 static void
375 mipscoff_symfile_finish (objfile)
376 struct objfile *objfile;
377 {
378 if (objfile -> sym_private != NULL)
379 {
380 mfree (objfile -> md, objfile -> sym_private);
381 }
382
383 /* If we have a file symbol header lying around, blow it away. */
384
385 if (cur_hdr)
386 {
387 free ((PTR)cur_hdr);
388 }
389 cur_hdr = 0;
390 }
391
392 /* Allocate zeroed memory */
393
394 static PTR
395 xzalloc(size)
396 unsigned int size;
397 {
398 PTR p = xmalloc (size);
399
400 memset (p, 0, size);
401 return p;
402 }
403
404 /* Exported procedure: Builds a symtab from the PST partial one.
405 Restores the environment in effect when PST was created, delegates
406 most of the work to an ancillary procedure, and sorts
407 and reorders the symtab list at the end */
408
409 static void
410 mipscoff_psymtab_to_symtab(pst)
411 struct partial_symtab *pst;
412 {
413
414 if (!pst)
415 return;
416
417 if (info_verbose) {
418 printf_filtered("Reading in symbols for %s...", pst->filename);
419 fflush(stdout);
420 }
421 /* Restore the header and list of pending typedefs */
422 cur_hdr = CUR_HDR(pst);
423
424 next_symbol_text_func = mips_next_symbol_text;
425
426 psymtab_to_symtab_1(pst, pst->filename);
427
428 /* Match with global symbols. This only needs to be done once,
429 after all of the symtabs and dependencies have been read in. */
430 scan_file_globals (pst->objfile);
431
432 if (info_verbose)
433 printf_filtered("done.\n");
434 }
435
436 /* Exported procedure: Is PC in the signal trampoline code */
437
438 int
439 in_sigtramp(pc, ignore)
440 CORE_ADDR pc;
441 char *ignore; /* function name */
442 {
443 if (sigtramp_address == 0)
444 fixup_sigtramp();
445 return (pc >= sigtramp_address && pc < sigtramp_end);
446 }
447 \f
448 /* File-level interface functions */
449
450 /* Read the symtab information from file ABFD into memory. Also,
451 return address just past end of our text segment in *END_OF_TEXT_SEGP. */
452
453 static void
454 read_the_mips_symtab(abfd, end_of_text_segp)
455 bfd *abfd;
456 CORE_ADDR *end_of_text_segp;
457 {
458 int stsize, st_hdrsize;
459 file_ptr st_filptr;
460 struct hdr_ext hdr_ext;
461 HDRR st_hdr;
462 /* Header for executable/object file we read symbols from */
463 struct coff_exec filhdr;
464 int val;
465
466 /* We need some info from the initial headers */
467 val = bfd_seek(abfd, (file_ptr) 0, L_SET);
468 val = bfd_read((PTR)&filhdr, sizeof filhdr, 1, abfd);
469
470 if (end_of_text_segp)
471 *end_of_text_segp =
472 bfd_h_get_32 (abfd, filhdr.a.text_start) +
473 bfd_h_get_32 (abfd, filhdr.a.tsize);
474
475 /* Find and read the symbol table header */
476 st_hdrsize = bfd_h_get_32 (abfd, filhdr.f.f_nsyms);
477 st_filptr = bfd_h_get_32 (abfd, filhdr.f.f_symptr);
478 if (st_filptr == 0)
479 return;
480
481 bfd_seek (abfd, st_filptr, L_SET);
482 if (st_hdrsize != sizeof (hdr_ext)) { /* Profanity check */
483 error ("Wrong header size: %d, not %d", st_hdrsize,
484 sizeof (hdr_ext));
485 }
486 if (bfd_read((PTR)&hdr_ext, st_hdrsize, 1, abfd) != st_hdrsize)
487 goto readerr;
488 ecoff_swap_hdr_in (abfd, &hdr_ext, &st_hdr);
489
490 /* Find out how large the symbol table is */
491 stsize = (st_hdr.cbExtOffset - (st_filptr + st_hdrsize))
492 + st_hdr.iextMax * cbEXTR;
493
494 /* Allocate space for the symbol table. Read it in. */
495 cur_hdr = (HDRR *) xmalloc(stsize + st_hdrsize);
496
497 memcpy((PTR)cur_hdr, (PTR)&hdr_ext, st_hdrsize);
498 if (bfd_read((char *)cur_hdr + st_hdrsize, stsize, 1, abfd) != stsize)
499 goto readerr;
500
501 /* Fixup file_pointers in it */
502 fixup_symtab(cur_hdr, (char *) cur_hdr + st_hdrsize,
503 st_filptr + st_hdrsize, abfd);
504
505 return;
506 readerr:
507 error("Short read on %s", bfd_get_filename (abfd));
508 }
509
510
511 /* Turn all file-relative pointers in the symtab described by HDR
512 into memory pointers, given that the symtab itself is located
513 at DATA in memory and F_PTR in the file.
514
515 Byte-swap all the data structures, in place, while we are at it --
516 except AUX entries, which we leave in their original byte order.
517 They will be swapped as they are used instead. (FIXME: we ought to
518 do all the data structures that way.) */
519
520 static void
521 fixup_symtab (hdr, data, f_ptr, abfd)
522 HDRR *hdr;
523 char *data;
524 file_ptr f_ptr;
525 bfd *abfd;
526 {
527 int f_idx, s_idx, i;
528 FDR *fh;
529 SYMR *sh;
530 PDR *pr;
531 EXTR *esh;
532 struct rfd_ext *rbase;
533
534 /* This function depends on the external and internal forms
535 of the MIPS symbol table taking identical space. Check this
536 assumption at compile-time.
537 DO NOT DELETE THESE ENTRIES, OR COMMENT THEM OUT, JUST BECAUSE SOME
538 "LINT" OR COMPILER THINKS THEY ARE UNUSED! Thank you. */
539 static check_hdr1[1 + sizeof (struct hdr_ext) - sizeof (HDRR)] = {0};
540 static check_hdr2[1 + sizeof (HDRR) - sizeof (struct hdr_ext)] = {0};
541 static check_fdr1[1 + sizeof (struct fdr_ext) - sizeof (FDR)] = {0};
542 static check_fdr2[1 + sizeof (FDR) - sizeof (struct fdr_ext)] = {0};
543 static check_pdr1[1 + sizeof (struct pdr_ext) - sizeof (PDR)] = {0};
544 static check_pdr2[1 + sizeof (PDR) - sizeof (struct pdr_ext)] = {0};
545 static check_sym1[1 + sizeof (struct sym_ext) - sizeof (SYMR)] = {0};
546 static check_sym2[1 + sizeof (SYMR) - sizeof (struct sym_ext)] = {0};
547 static check_ext1[1 + sizeof (struct ext_ext) - sizeof (EXTR)] = {0};
548 static check_ext2[1 + sizeof (EXTR) - sizeof (struct ext_ext)] = {0};
549 static check_rfd1[1 + sizeof (struct rfd_ext) - sizeof (RFDT)] = {0};
550 static check_rfd2[1 + sizeof (RFDT) - sizeof (struct rfd_ext)] = {0};
551
552 /* Swap in the header record. */
553 ecoff_swap_hdr_in (abfd, hdr, hdr);
554
555 /*
556 * These fields are useless (and empty) by now:
557 * hdr->cbDnOffset, hdr->cbOptOffset
558 * We use them for other internal purposes.
559 */
560 hdr->cbDnOffset = 0;
561 hdr->cbOptOffset = 0;
562
563 #define FIX(off) \
564 if (hdr->off) hdr->off = (unsigned int)data + (hdr->off - f_ptr);
565
566 FIX(cbLineOffset);
567 FIX(cbPdOffset);
568 FIX(cbSymOffset);
569 FIX(cbOptOffset);
570 FIX(cbAuxOffset);
571 FIX(cbSsOffset);
572 FIX(cbSsExtOffset);
573 FIX(cbFdOffset);
574 FIX(cbRfdOffset);
575 FIX(cbExtOffset);
576 #undef FIX
577
578 /* Fix all the RFD's. */
579 rbase = (struct rfd_ext *)(hdr->cbRfdOffset);
580 for (i = 0; i < hdr->crfd; i++) {
581 ecoff_swap_rfd_in (abfd, rbase+i, (pRFDT) rbase+i);
582 }
583
584 /* Fix all string pointers inside the symtab, and
585 the FDR records. Also fix other miscellany. */
586
587 for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++) {
588 register unsigned code_offset;
589
590 /* Header itself, and strings */
591 fh = (FDR *) (hdr->cbFdOffset) + f_idx;
592
593 /* Swap in the FDR */
594 ecoff_swap_fdr_in (abfd, fh, fh);
595
596 fh->issBase += hdr->cbSsOffset;
597 if (fh->rss != -1)
598 fh->rss = (long)fh->rss + fh->issBase;
599
600 /* Local symbols */
601 fh->isymBase = (int)((SYMR*)(hdr->cbSymOffset)+fh->isymBase);
602
603 /* FIXME! Probably don't want to do this here! */
604 for (s_idx = 0; s_idx < fh->csym; s_idx++) {
605 sh = (SYMR*)fh->isymBase + s_idx;
606 ecoff_swap_sym_in (abfd, sh, sh);
607
608 sh->iss = (long) sh->iss + fh->issBase;
609 sh->reserved = 0;
610 }
611
612 cur_fd = f_idx;
613
614 /* cannot fix fh->ipdFirst because it is a short */
615 #define IPDFIRST(h,fh) \
616 ((long)h->cbPdOffset + fh->ipdFirst * sizeof(PDR))
617
618 /* Optional symbols (actually used for partial_symtabs) */
619 fh->ioptBase = 0;
620 fh->copt = 0;
621
622 /* Aux symbols */
623 if (fh->caux)
624 fh->iauxBase = hdr->cbAuxOffset + fh->iauxBase * sizeof(union aux_ext);
625 /* Relative file descriptor table */
626 fh->rfdBase = hdr->cbRfdOffset + fh->rfdBase * sizeof(RFDT);
627
628 /* Line numbers */
629 if (fh->cbLine)
630 fh->cbLineOffset += hdr->cbLineOffset;
631
632 /* Procedure symbols. (XXX This should be done later) */
633 code_offset = fh->adr;
634 for (s_idx = 0; s_idx < fh->cpd; s_idx++) {
635 unsigned name, only_ext;
636
637 pr = (PDR*)(IPDFIRST(hdr,fh)) + s_idx;
638 ecoff_swap_pdr_in (abfd, pr, pr);
639
640 /* Simple rule to find files linked "-x" */
641 only_ext = fh->rss == -1;
642 if (only_ext) {
643 if (pr->isym == -1) {
644 /* static function */
645 sh = (SYMR*)-1;
646 } else {
647 /* external */
648 name = hdr->cbExtOffset + pr->isym * sizeof(EXTR);
649 sh = &((EXTR*)name)->asym;
650 }
651 } else {
652 /* Full symbols */
653 sh = (SYMR*)fh->isymBase + pr->isym;
654 /* Included code ? */
655 if (s_idx == 0 && pr->adr != 0)
656 code_offset -= pr->adr;
657 }
658
659 /* Turn index into a pointer */
660 pr->isym = (long)sh;
661
662 /* Fix line numbers */
663 pr->cbLineOffset += fh->cbLineOffset;
664
665 /* Relocate address */
666 if (!only_ext)
667 pr->adr += code_offset;
668 }
669 }
670
671 /* External symbols: swap in, and fix string */
672 for (s_idx = 0; s_idx < hdr->iextMax; s_idx++) {
673 esh = (EXTR*)(hdr->cbExtOffset) + s_idx;
674 ecoff_swap_ext_in (abfd, esh, esh);
675 esh->asym.iss = esh->asym.iss + hdr->cbSsExtOffset;
676 }
677 }
678
679
680 /* Find a file descriptor given its index RF relative to a file CF */
681
682 static FDR *
683 get_rfd (cf, rf)
684 int cf, rf;
685 {
686 register FDR *f;
687
688 f = (FDR *) (cur_hdr->cbFdOffset) + cf;
689 /* Object files do not have the RFD table, all refs are absolute */
690 if (f->rfdBase == 0)
691 return (FDR *) (cur_hdr->cbFdOffset) + rf;
692 cf = *((pRFDT) f->rfdBase + rf);
693 return (FDR *) (cur_hdr->cbFdOffset) + cf;
694 }
695
696 /* Return a safer print NAME for a file descriptor */
697
698 static char *
699 fdr_name(name)
700 char *name;
701 {
702 if (name == (char *) -1)
703 return "<stripped file>";
704 if (UNSAFE_DATA_ADDR(name))
705 return "<NFY>";
706 return name;
707 }
708
709
710 /* Read in and parse the symtab of the file OBJFILE. Symbols from
711 different sections are relocated via the SECTION_OFFSETS. */
712
713 static void
714 read_mips_symtab (objfile, section_offsets)
715 struct objfile *objfile;
716 struct section_offsets *section_offsets;
717 {
718 CORE_ADDR end_of_text_seg;
719
720 read_the_mips_symtab(objfile->obfd, &end_of_text_seg);
721
722 parse_partial_symbols(end_of_text_seg, objfile, section_offsets);
723
724 #if 0
725 /*
726 * Check to make sure file was compiled with -g.
727 * If not, warn the user of this limitation.
728 */
729 if (compare_glevel(max_glevel, GLEVEL_2) < 0) {
730 if (max_gdbinfo == 0)
731 printf (
732 "\n%s not compiled with -g, debugging support is limited.\n",
733 objfile->name);
734 printf(
735 "You should compile with -g2 or -g3 for best debugging support.\n");
736 fflush(stdout);
737 }
738 #endif
739 }
740 \f
741 /* Local utilities */
742
743 /* Map of FDR indexes to partial symtabs */
744
745 struct pst_map {
746 struct partial_symtab *pst; /* the psymtab proper */
747 int n_globals; /* exported globals (external symbols) */
748 int globals_offset; /* cumulative */
749 };
750
751
752 /* Utility stack, used to nest procedures and blocks properly.
753 It is a doubly linked list, to avoid too many alloc/free.
754 Since we might need it quite a few times it is NOT deallocated
755 after use. */
756
757 static struct parse_stack {
758 struct parse_stack *next, *prev;
759 struct symtab *cur_st; /* Current symtab. */
760 struct block *cur_block; /* Block in it. */
761 int blocktype; /* What are we parsing. */
762 int maxsyms; /* Max symbols in this block. */
763 struct type *cur_type; /* Type we parse fields for. */
764 int cur_field; /* Field number in cur_type. */
765 int procadr; /* Start addres of this procedure */
766 int numargs; /* Its argument count */
767 } *top_stack; /* Top stack ptr */
768
769
770 /* Enter a new lexical context */
771
772 static void
773 push_parse_stack()
774 {
775 struct parse_stack *new;
776
777 /* Reuse frames if possible */
778 if (top_stack && top_stack->prev)
779 new = top_stack->prev;
780 else
781 new = (struct parse_stack *) xzalloc(sizeof(struct parse_stack));
782 /* Initialize new frame with previous content */
783 if (top_stack) {
784 register struct parse_stack *prev = new->prev;
785
786 *new = *top_stack;
787 top_stack->prev = new;
788 new->prev = prev;
789 new->next = top_stack;
790 }
791 top_stack = new;
792 }
793
794 /* Exit a lexical context */
795
796 static void
797 pop_parse_stack()
798 {
799 if (!top_stack)
800 return;
801 if (top_stack->next)
802 top_stack = top_stack->next;
803 }
804
805
806 /* Cross-references might be to things we haven't looked at
807 yet, e.g. type references. To avoid too many type
808 duplications we keep a quick fixup table, an array
809 of lists of references indexed by file descriptor */
810
811 static struct mips_pending {
812 struct mips_pending *next; /* link */
813 SYMR *s; /* the symbol */
814 struct type *t; /* its partial type descriptor */
815 } **pending_list;
816
817
818 /* Check whether we already saw symbol SH in file FH as undefined */
819
820 static struct mips_pending *
821 is_pending_symbol(fh, sh)
822 FDR *fh;
823 SYMR *sh;
824 {
825 int f_idx = fh - (FDR *) cur_hdr->cbFdOffset;
826 register struct mips_pending *p;
827
828 /* Linear search is ok, list is typically no more than 10 deep */
829 for (p = pending_list[f_idx]; p; p = p->next)
830 if (p->s == sh)
831 break;
832 return p;
833 }
834
835 /* Add a new undef symbol SH of type T */
836
837 static void
838 add_pending(fh, sh, t)
839 FDR *fh;
840 SYMR *sh;
841 struct type *t;
842 {
843 int f_idx = fh - (FDR *) cur_hdr->cbFdOffset;
844 struct mips_pending *p = is_pending_symbol(fh, sh);
845
846 /* Make sure we do not make duplicates */
847 if (!p) {
848 p = (struct mips_pending *) xmalloc(sizeof(*p));
849 p->s = sh;
850 p->t = t;
851 p->next = pending_list[f_idx];
852 pending_list[f_idx] = p;
853 }
854 sh->reserved = 1; /* for quick check */
855 }
856
857 /* Throw away undef entries when done with file index F_IDX */
858 /* FIXME -- storage leak. This is never called!!! --gnu */
859
860 #if 0
861
862 static void
863 free_pending(f_idx)
864 int f_idx;
865 {
866 register struct mips_pending *p, *q;
867
868 for (p = pending_list[f_idx]; p; p = q) {
869 q = p->next;
870 free((PTR)p);
871 }
872 pending_list[f_idx] = 0;
873 }
874
875 #endif
876
877 static char *
878 prepend_tag_kind(tag_name, type_code)
879 char *tag_name;
880 enum type_code type_code;
881 {
882 char *prefix;
883 char *result;
884 switch (type_code) {
885 case TYPE_CODE_ENUM:
886 prefix = "enum ";
887 break;
888 case TYPE_CODE_STRUCT:
889 prefix = "struct ";
890 break;
891 case TYPE_CODE_UNION:
892 prefix = "union ";
893 break;
894 default:
895 prefix = "";
896 }
897
898 result = (char*)obstack_alloc (&current_objfile->symbol_obstack,
899 strlen(prefix) + strlen(tag_name) + 1);
900 sprintf(result, "%s%s", prefix, tag_name);
901 return result;
902 }
903
904 \f
905 /* Parsing Routines proper. */
906
907 /* Parse a single symbol. Mostly just make up a GDB symbol for it.
908 For blocks, procedures and types we open a new lexical context.
909 This is basically just a big switch on the symbol's type.
910 Argument AX is the base pointer of aux symbols for this file (fh->iauxBase).
911 BIGEND says whether aux symbols are big-endian or little-endian.
912 Return count of SYMR's handled (normally one). */
913
914 static int
915 parse_symbol(sh, ax, bigend)
916 SYMR *sh;
917 union aux_ext *ax;
918 int bigend;
919 {
920 char *name;
921 struct symbol *s;
922 struct block *b;
923 struct type *t;
924 struct field *f;
925 int count = 1;
926 /* When a symbol is cross-referenced from other files/symbols
927 we mark it explicitly */
928 int pend = (sh->reserved == 1);
929 enum address_class class;
930 TIR tir;
931
932 switch (sh->st) {
933
934 case stNil:
935 break;
936
937 case stGlobal: /* external symbol, goes into global block */
938 class = LOC_STATIC;
939 b = BLOCKVECTOR_BLOCK(BLOCKVECTOR(top_stack->cur_st),
940 GLOBAL_BLOCK);
941 s = new_symbol((char *)sh->iss);
942 SYMBOL_VALUE_ADDRESS(s) = (CORE_ADDR)sh->value;
943 goto data;
944
945 case stStatic: /* static data, goes into current block. */
946 class = LOC_STATIC;
947 b = top_stack->cur_block;
948 s = new_symbol((char *)sh->iss);
949 SYMBOL_VALUE_ADDRESS(s) = (CORE_ADDR)sh->value;
950 goto data;
951
952 case stLocal: /* local variable, goes into current block */
953 if (sh->sc == scRegister) {
954 class = LOC_REGISTER;
955 if (sh->value > 31)
956 sh->value += FP0_REGNUM-32;
957 } else
958 class = LOC_LOCAL;
959 b = top_stack->cur_block;
960 s = new_symbol((char *)sh->iss);
961 SYMBOL_VALUE(s) = sh->value;
962
963 data: /* Common code for symbols describing data */
964 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
965 SYMBOL_CLASS(s) = class;
966 add_symbol(s, b);
967
968 /* Type could be missing in a number of cases */
969 if (sh->sc == scUndefined || sh->sc == scNil ||
970 sh->index == 0xfffff)
971 SYMBOL_TYPE(s) = builtin_type_int; /* undefined? */
972 else
973 SYMBOL_TYPE(s) = parse_type(ax + sh->index, 0, bigend);
974 /* Value of a data symbol is its memory address */
975 break;
976
977 case stParam: /* arg to procedure, goes into current block */
978 max_gdbinfo++;
979 top_stack->numargs++;
980
981 name = (char*)sh->iss;
982 /* Special GNU C++ name. */
983 if (name[0] == CPLUS_MARKER && name[1] == 't' && name[2] == 0)
984 name = "this"; /* FIXME, not alloc'd in obstack */
985 s = new_symbol(name);
986
987 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
988 if (sh->sc == scRegister) {
989 SYMBOL_CLASS(s) = LOC_REGPARM;
990 if (sh->value > 31)
991 sh->value += FP0_REGNUM-32;
992 } else
993 SYMBOL_CLASS(s) = LOC_ARG;
994 SYMBOL_VALUE(s) = sh->value;
995 SYMBOL_TYPE(s) = parse_type(ax + sh->index, 0, bigend);
996 add_symbol(s, top_stack->cur_block);
997 #if 0
998 /* FIXME: This has not been tested. See dbxread.c */
999 /* Add the type of this parameter to the function/procedure
1000 type of this block. */
1001 add_param_to_type(&top_stack->cur_block->function->type,s);
1002 #endif
1003 break;
1004
1005 case stLabel: /* label, goes into current block */
1006 s = new_symbol((char *)sh->iss);
1007 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE; /* so that it can be used */
1008 SYMBOL_CLASS(s) = LOC_LABEL; /* but not misused */
1009 SYMBOL_VALUE_ADDRESS(s) = (CORE_ADDR)sh->value;
1010 SYMBOL_TYPE(s) = builtin_type_int;
1011 add_symbol(s, top_stack->cur_block);
1012 break;
1013
1014 case stProc: /* Procedure, usually goes into global block */
1015 case stStaticProc: /* Static procedure, goes into current block */
1016 s = new_symbol((char *)sh->iss);
1017 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
1018 SYMBOL_CLASS(s) = LOC_BLOCK;
1019 /* Type of the return value */
1020 if (sh->sc == scUndefined || sh->sc == scNil)
1021 t = builtin_type_int;
1022 else
1023 t = parse_type(ax + sh->index + 1, 0, bigend);
1024 b = top_stack->cur_block;
1025 if (sh->st == stProc) {
1026 struct blockvector *bv = BLOCKVECTOR(top_stack->cur_st);
1027 /* The next test should normally be true,
1028 but provides a hook for nested functions
1029 (which we don't want to make global). */
1030 if (b == BLOCKVECTOR_BLOCK(bv, STATIC_BLOCK))
1031 b = BLOCKVECTOR_BLOCK(bv, GLOBAL_BLOCK);
1032 }
1033 add_symbol(s, b);
1034
1035 /* Make a type for the procedure itself */
1036 #if 0
1037 /* FIXME: This has not been tested yet! See dbxread.c */
1038 /* Generate a template for the type of this function. The
1039 types of the arguments will be added as we read the symbol
1040 table. */
1041 bcopy(SYMBOL_TYPE(s),lookup_function_type(t),sizeof(struct type));
1042 #else
1043 SYMBOL_TYPE(s) = lookup_function_type (t);
1044 #endif
1045
1046 /* Create and enter a new lexical context */
1047 b = new_block(top_stack->maxsyms);
1048 SYMBOL_BLOCK_VALUE(s) = b;
1049 BLOCK_FUNCTION(b) = s;
1050 BLOCK_START(b) = BLOCK_END(b) = sh->value;
1051 BLOCK_SUPERBLOCK(b) = top_stack->cur_block;
1052 add_block(b, top_stack->cur_st);
1053
1054 /* Not if we only have partial info */
1055 if (sh->sc == scUndefined || sh->sc == scNil)
1056 break;
1057
1058 push_parse_stack();
1059 top_stack->cur_block = b;
1060 top_stack->blocktype = sh->st;
1061 top_stack->cur_type = SYMBOL_TYPE(s);
1062 top_stack->cur_field = -1;
1063 top_stack->procadr = sh->value;
1064 top_stack->numargs = 0;
1065
1066 sh->value = (long) SYMBOL_TYPE(s);
1067 break;
1068
1069 /* Beginning of code for structure, union, and enum definitions.
1070 They all share a common set of local variables, defined here. */
1071 {
1072 enum type_code type_code;
1073 SYMR *tsym;
1074 int nfields;
1075 long max_value;
1076 struct field *f;
1077
1078 case stStruct: /* Start a block defining a struct type */
1079 type_code = TYPE_CODE_STRUCT;
1080 goto structured_common;
1081
1082 case stUnion: /* Start a block defining a union type */
1083 type_code = TYPE_CODE_UNION;
1084 goto structured_common;
1085
1086 case stEnum: /* Start a block defining an enum type */
1087 type_code = TYPE_CODE_ENUM;
1088 goto structured_common;
1089
1090 case stBlock: /* Either a lexical block, or some type */
1091 if (sh->sc != scInfo)
1092 goto case_stBlock_code; /* Lexical block */
1093
1094 type_code = TYPE_CODE_UNDEF; /* We have a type. */
1095
1096 /* Common code for handling struct, union, enum, and/or as-yet-
1097 unknown-type blocks of info about structured data. `type_code'
1098 has been set to the proper TYPE_CODE, if we know it. */
1099 structured_common:
1100 push_parse_stack();
1101 top_stack->blocktype = stBlock;
1102
1103 s = new_symbol((char *)sh->iss);
1104 SYMBOL_NAMESPACE(s) = STRUCT_NAMESPACE;
1105 SYMBOL_CLASS(s) = LOC_TYPEDEF;
1106 SYMBOL_VALUE(s) = 0;
1107 add_symbol(s, top_stack->cur_block);
1108
1109 /* First count the number of fields and the highest value. */
1110 nfields = 0;
1111 max_value = 0;
1112 for (tsym = sh+1; tsym->st != stEnd; tsym++)
1113 {
1114 if (tsym->st == stMember) {
1115 if (nfields == 0 && type_code == TYPE_CODE_UNDEF)
1116 /* If the type of the member is Nil (or Void),
1117 without qualifiers, assume the tag is an
1118 enumeration. */
1119 if (tsym->index == indexNil)
1120 type_code = TYPE_CODE_ENUM;
1121 else {
1122 ecoff_swap_tir_in (bigend,
1123 &ax[tsym->index].a_ti,
1124 &tir);
1125 if ((tir.bt == btNil || tir.bt == btVoid)
1126 && tir.tq0 == tqNil)
1127 type_code = TYPE_CODE_ENUM;
1128 }
1129 nfields++;
1130 if (tsym->value > max_value)
1131 max_value = tsym->value;
1132 }
1133 else if (tsym->st == stBlock
1134 || tsym->st == stUnion
1135 || tsym->st == stEnum
1136 || tsym->st == stStruct
1137 || tsym->st == stParsed) {
1138 if (tsym->sc == scVariant) ; /*UNIMPLEMENTED*/
1139 if (tsym->index != 0)
1140 tsym = ((SYMR*)cur_fdr->isymBase)
1141 + tsym->index-1;
1142 }
1143 else complain (&block_member_complaint, tsym->st);
1144 }
1145
1146 /* In an stBlock, there is no way to distinguish structs,
1147 unions, and enums at this point. This is a bug in the
1148 original design (that has been fixed with the
1149 recent addition of the stStruct, stUnion, and stEnum
1150 symbol types.) The way you can tell is if/when you
1151 see a variable or field of that type. In that case
1152 the variable's type (in the AUX table) says if the
1153 type is struct, union, or enum,
1154 and points back to the stBlock here.
1155 So you can patch the tag kind up later - but only
1156 if there actually is a variable or field of that type.
1157
1158 So until we know for sure, we will guess at this point.
1159 The heuristic is:
1160 If the first member has index==indexNil or a void type,
1161 assume we have an enumeration.
1162 Otherwise, if there is more than one member, and all
1163 the members have offset 0, assume we have a union.
1164 Otherwise, assume we have a struct.
1165
1166 The heuristic could guess wrong in the case of
1167 of an enumeration with no members or a union
1168 with one (or zero) members, or when all except the
1169 last field of a struct have width zero.
1170 These are uncommon and/or illegal situations, and
1171 in any case guessing wrong probably doesn't matter much.
1172
1173 But if we later do find out we were wrong,
1174 we fixup the tag kind. Members of an enumeration
1175 must be handled differently from struct/union fields,
1176 and that is harder to patch up, but luckily we
1177 shouldn't need to. (If there are any enumeration
1178 members, we can tell for sure it's an enum here.) */
1179
1180 if (type_code == TYPE_CODE_UNDEF)
1181 if (nfields > 1 && max_value == 0)
1182 type_code = TYPE_CODE_UNION;
1183 else
1184 type_code = TYPE_CODE_STRUCT;
1185
1186 /* If this type was expected, use its partial definition */
1187 if (pend)
1188 t = is_pending_symbol(cur_fdr, sh)->t;
1189 else
1190 t = new_type(prepend_tag_kind((char *)sh->iss,
1191 type_code));
1192
1193 TYPE_CODE(t) = type_code;
1194 TYPE_LENGTH(t) = sh->value;
1195 TYPE_NFIELDS(t) = nfields;
1196 TYPE_FIELDS(t) = f = (struct field*)
1197 TYPE_ALLOC (t, nfields * sizeof (struct field));
1198
1199 if (type_code == TYPE_CODE_ENUM) {
1200 /* This is a non-empty enum. */
1201 for (tsym = sh + 1; tsym->st == stMember; tsym++) {
1202 struct symbol *enum_sym;
1203 f->bitpos = tsym->value;
1204 f->type = t;
1205 f->name = (char*)tsym->iss;
1206 f->bitsize = 0;
1207
1208 enum_sym = (struct symbol *)
1209 obstack_alloc (&current_objfile->symbol_obstack,
1210 sizeof (struct symbol));
1211 memset ((PTR)enum_sym, 0, sizeof (struct symbol));
1212 SYMBOL_NAME (enum_sym) = f->name;
1213 SYMBOL_CLASS (enum_sym) = LOC_CONST;
1214 SYMBOL_TYPE (enum_sym) = t;
1215 SYMBOL_NAMESPACE (enum_sym) = VAR_NAMESPACE;
1216 SYMBOL_VALUE (enum_sym) = tsym->value;
1217 add_symbol(enum_sym, top_stack->cur_block);
1218
1219 /* Skip the stMembers that we've handled. */
1220 count++;
1221 f++;
1222 }
1223 }
1224 SYMBOL_TYPE(s) = t;
1225 /* make this the current type */
1226 top_stack->cur_type = t;
1227 top_stack->cur_field = 0;
1228 /* Mark that symbol has a type, and say which one */
1229 sh->value = (long) t;
1230 break;
1231
1232 /* End of local variables shared by struct, union, enum, and
1233 block (as yet unknown struct/union/enum) processing. */
1234 }
1235
1236 case_stBlock_code:
1237 /* beginnning of (code) block. Value of symbol
1238 is the displacement from procedure start */
1239 push_parse_stack();
1240 top_stack->blocktype = stBlock;
1241 b = new_block(top_stack->maxsyms);
1242 BLOCK_START(b) = sh->value + top_stack->procadr;
1243 BLOCK_SUPERBLOCK(b) = top_stack->cur_block;
1244 top_stack->cur_block = b;
1245 add_block(b, top_stack->cur_st);
1246 break;
1247
1248 case stEnd: /* end (of anything) */
1249 if (sh->sc == scInfo) {
1250 /* Finished with type */
1251 top_stack->cur_type = 0;
1252 } else if (sh->sc == scText &&
1253 (top_stack->blocktype == stProc ||
1254 top_stack->blocktype == stStaticProc)) {
1255 /* Finished with procedure */
1256 struct blockvector *bv = BLOCKVECTOR(top_stack->cur_st);
1257 struct mips_extra_func_info *e;
1258 struct block *b;
1259 int i;
1260
1261 BLOCK_END(top_stack->cur_block) += sh->value; /* size */
1262
1263 /* Make up special symbol to contain procedure specific
1264 info */
1265 s = new_symbol(MIPS_EFI_SYMBOL_NAME);
1266 SYMBOL_NAMESPACE(s) = LABEL_NAMESPACE;
1267 SYMBOL_CLASS(s) = LOC_CONST;
1268 SYMBOL_TYPE(s) = builtin_type_void;
1269 e = (struct mips_extra_func_info *)
1270 obstack_alloc (&current_objfile->symbol_obstack,
1271 sizeof (struct mips_extra_func_info));
1272 SYMBOL_VALUE(s) = (int)e;
1273 e->numargs = top_stack->numargs;
1274 add_symbol(s, top_stack->cur_block);
1275
1276 /* Reallocate symbols, saving memory */
1277 b = shrink_block(top_stack->cur_block, top_stack->cur_st);
1278
1279 /* f77 emits proc-level with address bounds==[0,0],
1280 So look for such child blocks, and patch them. */
1281 for (i = 0; i < BLOCKVECTOR_NBLOCKS(bv); i++) {
1282 struct block *b_bad = BLOCKVECTOR_BLOCK(bv,i);
1283 if (BLOCK_SUPERBLOCK(b_bad) == b
1284 && BLOCK_START(b_bad) == top_stack->procadr
1285 && BLOCK_END(b_bad) == top_stack->procadr) {
1286 BLOCK_START(b_bad) = BLOCK_START(b);
1287 BLOCK_END(b_bad) = BLOCK_END(b);
1288 }
1289 }
1290 } else if (sh->sc == scText && top_stack->blocktype == stBlock) {
1291 /* End of (code) block. The value of the symbol
1292 is the displacement from the procedure`s start
1293 address of the end of this block. */
1294 BLOCK_END(top_stack->cur_block) = sh->value + top_stack->procadr;
1295 shrink_block(top_stack->cur_block, top_stack->cur_st);
1296 } else if (sh->sc == scText && top_stack->blocktype == stFile) {
1297 /* End of file. Pop parse stack and ignore. Higher
1298 level code deals with this. */
1299 ;
1300 } else complain (&stEnd_complaint, sh->sc);
1301
1302 pop_parse_stack(); /* restore previous lexical context */
1303 break;
1304
1305 case stMember: /* member of struct or union */
1306 f = &TYPE_FIELDS(top_stack->cur_type)[top_stack->cur_field++];
1307 f->name = (char*)sh->iss;
1308 f->bitpos = sh->value;
1309 f->bitsize = 0;
1310 f->type = parse_type(ax + sh->index, &f->bitsize, bigend);
1311 break;
1312
1313 case stTypedef: /* type definition */
1314 s = new_symbol((char *)sh->iss);
1315 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
1316 SYMBOL_CLASS(s) = LOC_TYPEDEF;
1317 SYMBOL_BLOCK_VALUE(s) = top_stack->cur_block;
1318 add_symbol(s, top_stack->cur_block);
1319 SYMBOL_TYPE(s) = parse_type(ax + sh->index, 0, bigend);
1320 sh->value = (long) SYMBOL_TYPE(s);
1321 break;
1322
1323 case stFile: /* file name */
1324 push_parse_stack();
1325 top_stack->blocktype = sh->st;
1326 break;
1327
1328 /* I`ve never seen these for C */
1329 case stRegReloc:
1330 break; /* register relocation */
1331 case stForward:
1332 break; /* forwarding address */
1333 case stConstant:
1334 break; /* constant */
1335 default:
1336 complain(&unknown_mips_symtype_complaint, sh->st);
1337 break;
1338 }
1339 sh->st = stParsed;
1340 return count;
1341 }
1342
1343 /* Parse the type information provided in the raw AX entries for
1344 the symbol SH. Return the bitfield size in BS, in case.
1345 We must byte-swap the AX entries before we use them; BIGEND says whether
1346 they are big-endian or little-endian (from fh->fBigendian). */
1347
1348 static struct type *
1349 parse_type(ax, bs, bigend)
1350 union aux_ext *ax;
1351 int *bs;
1352 int bigend;
1353 {
1354 /* Null entries in this map are treated specially */
1355 static struct type **map_bt[] =
1356 {
1357 &builtin_type_void, /* btNil */
1358 0, /* btAdr */
1359 &builtin_type_char, /* btChar */
1360 &builtin_type_unsigned_char, /* btUChar */
1361 &builtin_type_short, /* btShort */
1362 &builtin_type_unsigned_short, /* btUShort */
1363 &builtin_type_int, /* btInt */
1364 &builtin_type_unsigned_int, /* btUInt */
1365 &builtin_type_long, /* btLong */
1366 &builtin_type_unsigned_long, /* btULong */
1367 &builtin_type_float, /* btFloat */
1368 &builtin_type_double, /* btDouble */
1369 0, /* btStruct */
1370 0, /* btUnion */
1371 0, /* btEnum */
1372 0, /* btTypedef */
1373 0, /* btRange */
1374 0, /* btSet */
1375 &builtin_type_complex, /* btComplex */
1376 &builtin_type_double_complex, /* btDComplex */
1377 0, /* btIndirect */
1378 &builtin_type_fixed_dec, /* btFixedDec */
1379 &builtin_type_float_dec, /* btFloatDec */
1380 &builtin_type_string, /* btString */
1381 0, /* btBit */
1382 0, /* btPicture */
1383 &builtin_type_void, /* btVoid */
1384 &builtin_type_long_long, /* btLongLong */
1385 &builtin_type_unsigned_long_long,/* btULongLong */
1386 };
1387
1388 TIR t[1];
1389 struct type *tp = 0;
1390 char *fmt;
1391 union aux_ext *tax;
1392 enum type_code type_code;
1393
1394 /* Use aux as a type information record, map its basic type. */
1395 tax = ax;
1396 ecoff_swap_tir_in (bigend, &tax->a_ti, t);
1397 if (t->bt > (sizeof (map_bt)/sizeof (*map_bt))) {
1398 complain (&basic_type_complaint, t->bt);
1399 return builtin_type_int;
1400 }
1401 if (map_bt[t->bt]) {
1402 tp = *map_bt[t->bt];
1403 fmt = "%s";
1404 } else {
1405 tp = NULL;
1406 /* Cannot use builtin types -- build our own */
1407 switch (t->bt) {
1408 case btAdr:
1409 tp = lookup_pointer_type (builtin_type_void);
1410 fmt = "%s";
1411 break;
1412 case btStruct:
1413 type_code = TYPE_CODE_STRUCT;
1414 fmt = "struct %s";
1415 break;
1416 case btUnion:
1417 type_code = TYPE_CODE_UNION;
1418 fmt = "union %s";
1419 break;
1420 case btEnum:
1421 type_code = TYPE_CODE_ENUM;
1422 fmt = "enum %s";
1423 break;
1424 case btRange:
1425 type_code = TYPE_CODE_RANGE;
1426 fmt = "%s";
1427 break;
1428 case btSet:
1429 type_code = TYPE_CODE_SET;
1430 fmt = "set %s";
1431 break;
1432 case btTypedef:
1433 default:
1434 complain (&basic_type_complaint, t->bt);
1435 return builtin_type_int;
1436 }
1437 }
1438
1439 /* Skip over any further type qualifiers (FIXME). */
1440 if (t->continued) {
1441 /* This is the way it would work if the compiler worked */
1442 TIR t1[1];
1443 do {
1444 ax++;
1445 ecoff_swap_tir_in (bigend, ax, t1);
1446 } while (t1->continued);
1447 }
1448
1449 /* Move on to next aux */
1450 ax++;
1451
1452 if (t->fBitfield) {
1453 *bs = AUX_GET_WIDTH (bigend, ax);
1454 ax++;
1455 }
1456
1457 /* All these types really point to some (common) MIPS type
1458 definition, and only the type-qualifiers fully identify
1459 them. We'll make the same effort at sharing. */
1460 if (t->bt == btIndirect ||
1461 t->bt == btStruct ||
1462 t->bt == btUnion ||
1463 t->bt == btEnum ||
1464 t->bt == btTypedef ||
1465 t->bt == btRange ||
1466 t->bt == btSet) {
1467 char name[256], *pn;
1468
1469 /* Try to cross reference this type */
1470 ax += cross_ref(ax, &tp, type_code, &pn, bigend);
1471 /* reading .o file ? */
1472 if (UNSAFE_DATA_ADDR(tp))
1473 tp = init_type(type_code, 0, 0, (char *) NULL,
1474 (struct objfile *) NULL);
1475 /* SOMEONE OUGHT TO FIX DBXREAD TO DROP "STRUCT" */
1476 sprintf(name, fmt, pn);
1477
1478 /* Usually, TYPE_CODE(tp) is already type_code. The main
1479 exception is if we guessed wrong re struct/union/enum. */
1480 if (TYPE_CODE(tp) != type_code) {
1481 complain (&bad_tag_guess_complaint, name);
1482 TYPE_CODE(tp) = type_code;
1483 }
1484 if (TYPE_NAME(tp) == NULL || !STREQ (TYPE_NAME(tp), name))
1485 TYPE_NAME(tp) = obsavestring(name, strlen(name),
1486 &current_objfile -> type_obstack);
1487 }
1488
1489 /* Deal with range types */
1490 if (t->bt == btRange) {
1491 TYPE_NFIELDS (tp) = 2;
1492 TYPE_FIELDS (tp) = (struct field *)
1493 TYPE_ALLOC (tp, 2 * sizeof (struct field));
1494 TYPE_FIELD_NAME (tp, 0) = obsavestring ("Low", strlen ("Low"),
1495 &current_objfile -> type_obstack);
1496 TYPE_FIELD_BITPOS (tp, 0) = AUX_GET_DNLOW (bigend, ax);
1497 ax++;
1498 TYPE_FIELD_NAME (tp, 1) = obsavestring ("High", strlen ("High"),
1499 &current_objfile -> type_obstack);
1500 TYPE_FIELD_BITPOS (tp, 1) = AUX_GET_DNHIGH (bigend, ax);
1501 ax++;
1502 }
1503
1504 /* Parse all the type qualifiers now. If there are more
1505 than 6 the game will continue in the next aux */
1506
1507 #define PARSE_TQ(tq) \
1508 if (t->tq != tqNil) ax += upgrade_type(&tp, t->tq, ax, bigend);
1509
1510 again: PARSE_TQ(tq0);
1511 PARSE_TQ(tq1);
1512 PARSE_TQ(tq2);
1513 PARSE_TQ(tq3);
1514 PARSE_TQ(tq4);
1515 PARSE_TQ(tq5);
1516 #undef PARSE_TQ
1517
1518 if (t->continued) {
1519 tax++;
1520 ecoff_swap_tir_in (bigend, &tax->a_ti, t);
1521 goto again;
1522 }
1523 return tp;
1524 }
1525
1526 /* Make up a complex type from a basic one. Type is passed by
1527 reference in TPP and side-effected as necessary. The type
1528 qualifier TQ says how to handle the aux symbols at AX for
1529 the symbol SX we are currently analyzing. BIGEND says whether
1530 aux symbols are big-endian or little-endian.
1531 Returns the number of aux symbols we parsed. */
1532
1533 static int
1534 upgrade_type(tpp, tq, ax, bigend)
1535 struct type **tpp;
1536 int tq;
1537 union aux_ext *ax;
1538 int bigend;
1539 {
1540 int off;
1541 struct type *t;
1542
1543 /* Used in array processing */
1544 int rf, id;
1545 FDR *fh;
1546 struct field *f;
1547 int lower, upper;
1548 RNDXR rndx;
1549
1550 switch (tq) {
1551 case tqPtr:
1552 t = lookup_pointer_type (*tpp);
1553 *tpp = t;
1554 return 0;
1555
1556 case tqProc:
1557 t = lookup_function_type (*tpp);
1558 *tpp = t;
1559 return 0;
1560
1561 case tqArray:
1562 /* We should probably try to use create_range_type and
1563 create_array_type here. FIXME! */
1564 off = 0;
1565 t = init_type(TYPE_CODE_ARRAY, 0, 0, (char *) NULL,
1566 (struct objfile *) NULL);
1567 TYPE_TARGET_TYPE(t) = *tpp;
1568
1569 /* Determine and record the domain type (type of index) */
1570 ecoff_swap_rndx_in (bigend, ax, &rndx);
1571 id = rndx.index;
1572 rf = rndx.rfd;
1573 if (rf == 0xfff) {
1574 ax++;
1575 rf = AUX_GET_ISYM (bigend, ax);
1576 off++;
1577 }
1578 fh = get_rfd(cur_fd, rf);
1579
1580 /* Fields are kept in an array */
1581 /* FIXME - Memory leak! */
1582 if (TYPE_NFIELDS(t))
1583 TYPE_FIELDS(t) = (struct field*)
1584 xrealloc((PTR) TYPE_FIELDS(t),
1585 (TYPE_NFIELDS(t)+1) * sizeof(struct field));
1586 else
1587 TYPE_FIELDS(t) = (struct field*)
1588 xzalloc(sizeof(struct field));
1589 f = &(TYPE_FIELD(t,TYPE_NFIELDS(t)));
1590 TYPE_NFIELDS(t)++;
1591 memset((PTR)f, 0, sizeof(struct field));
1592
1593 /* XXX */ f->type = parse_type(id + (union aux_ext *)fh->iauxBase,
1594 &f->bitsize, bigend);
1595
1596 ax++;
1597 lower = AUX_GET_DNLOW (bigend, ax);
1598 ax++;
1599 upper = AUX_GET_DNHIGH (bigend, ax);
1600 ax++;
1601 rf = AUX_GET_WIDTH (bigend, ax); /* bit size of array element */
1602
1603 /* Check whether supplied array element bit size matches
1604 the known size of the element type. If this complaint
1605 ends up not happening, we can remove this code. It's
1606 here because we aren't sure we understand this *&%&$
1607 symbol format. */
1608 id = TYPE_LENGTH(TYPE_TARGET_TYPE(t)) << 3; /* bitsize */
1609 if (id == 0) {
1610 /* Most likely an undefined type */
1611 id = rf;
1612 TYPE_LENGTH(TYPE_TARGET_TYPE(t)) = id >> 3;
1613 }
1614 if (id != rf)
1615 complain (&array_bitsize_complaint, rf);
1616
1617 TYPE_LENGTH(t) = (upper < 0) ? 0 :
1618 (upper - lower + 1) * (rf >> 3);
1619 *tpp = t;
1620 return 4 + off;
1621
1622 case tqVol:
1623 /* Volatile -- currently ignored */
1624 return 0;
1625
1626 case tqConst:
1627 /* Const -- currently ignored */
1628 return 0;
1629
1630 default:
1631 complain (&unknown_type_qual_complaint, tq);
1632 return 0;
1633 }
1634 }
1635
1636
1637 /* Parse a procedure descriptor record PR. Note that the procedure
1638 is parsed _after_ the local symbols, now we just insert the extra
1639 information we need into a MIPS_EFI_SYMBOL_NAME symbol that has already
1640 been placed in the procedure's main block. Note also that images that
1641 have been partially stripped (ld -x) have been deprived
1642 of local symbols, and we have to cope with them here.
1643 The procedure's code ends at BOUND */
1644
1645 static void
1646 parse_procedure (pr, bound, have_stabs)
1647 PDR *pr;
1648 int bound;
1649 int have_stabs;
1650 {
1651 struct symbol *s, *i;
1652 SYMR *sh = (SYMR*)pr->isym;
1653 struct block *b;
1654 struct mips_extra_func_info *e;
1655 char *sh_name;
1656
1657 /* Static procedure at address pr->adr. Sigh. */
1658 if (sh == (SYMR*)-1) {
1659 complain (&pdr_static_symbol_complaint, pr->adr);
1660 return;
1661 }
1662 sh_name = (char*)sh->iss;
1663 if (have_stabs)
1664 s = lookup_symbol(sh_name, NULL, VAR_NAMESPACE, 0, NULL);
1665 else
1666 s = mylookup_symbol(sh_name, top_stack->cur_block,
1667 VAR_NAMESPACE, LOC_BLOCK);
1668
1669 if (s != 0) {
1670 b = SYMBOL_BLOCK_VALUE(s);
1671 } else {
1672 complain (&pdr_for_nonsymbol_complaint, sh_name);
1673 #if 1
1674 return;
1675 #else
1676 /* FIXME -- delete. We can't do symbol allocation now; it's all done. */
1677 s = new_symbol(sh_name);
1678 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
1679 SYMBOL_CLASS(s) = LOC_BLOCK;
1680 /* Donno its type, hope int is ok */
1681 SYMBOL_TYPE(s) = lookup_function_type (builtin_type_int);
1682 add_symbol(s, top_stack->cur_block);
1683 /* Wont have symbols for this one */
1684 b = new_block(2);
1685 SYMBOL_BLOCK_VALUE(s) = b;
1686 BLOCK_FUNCTION(b) = s;
1687 BLOCK_START(b) = pr->adr;
1688 BLOCK_END(b) = bound;
1689 BLOCK_SUPERBLOCK(b) = top_stack->cur_block;
1690 add_block(b, top_stack->cur_st);
1691 #endif
1692 }
1693
1694 i = mylookup_symbol(MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, LOC_CONST);
1695
1696 if (i)
1697 {
1698 e = (struct mips_extra_func_info *)SYMBOL_VALUE(i);
1699 e->pdr = *pr;
1700 e->pdr.isym = (long)s;
1701 }
1702 }
1703
1704 /* Parse the external symbol ES. Just call parse_symbol() after
1705 making sure we know where the aux are for it. For procedures,
1706 parsing of the PDRs has already provided all the needed
1707 information, we only parse them if SKIP_PROCEDURES is false,
1708 and only if this causes no symbol duplication.
1709 BIGEND says whether aux entries are big-endian or little-endian.
1710
1711 This routine clobbers top_stack->cur_block and ->cur_st. */
1712
1713 static void
1714 parse_external(es, skip_procedures, bigend)
1715 EXTR *es;
1716 int skip_procedures;
1717 int bigend;
1718 {
1719 union aux_ext *ax;
1720
1721 if (es->ifd != ifdNil) {
1722 cur_fd = es->ifd;
1723 cur_fdr = (FDR*)(cur_hdr->cbFdOffset) + cur_fd;
1724 ax = (union aux_ext *)cur_fdr->iauxBase;
1725 } else {
1726 cur_fdr = (FDR*)(cur_hdr->cbFdOffset);
1727 ax = 0;
1728 }
1729
1730 /* Reading .o files */
1731 if (es->asym.sc == scUndefined || es->asym.sc == scNil) {
1732 char *what;
1733 switch (es->asym.st) {
1734 case stStaticProc:
1735 case stProc: what = "procedure"; n_undef_procs++; break;
1736 case stGlobal: what = "variable"; n_undef_vars++; break;
1737 case stLabel: what = "label"; n_undef_labels++; break;
1738 default : what = "symbol"; break;
1739 }
1740 n_undef_symbols++;
1741 /* FIXME: Turn this into a complaint? */
1742 if (info_verbose)
1743 printf_filtered("Warning: %s `%s' is undefined (in %s)\n",
1744 what, es->asym.iss, fdr_name((char *)cur_fdr->rss));
1745 return;
1746 }
1747
1748 switch (es->asym.st) {
1749 case stProc:
1750 /* If we have full symbols we do not need more */
1751 if (skip_procedures)
1752 return;
1753 if (mylookup_symbol ((char *)es->asym.iss, top_stack->cur_block,
1754 VAR_NAMESPACE, LOC_BLOCK))
1755 break;
1756 /* fall through */
1757 case stGlobal:
1758 case stLabel:
1759 /*
1760 * Note that the case of a symbol with indexNil
1761 * must be handled anyways by parse_symbol().
1762 */
1763 parse_symbol(&es->asym, ax, bigend);
1764 break;
1765 default:
1766 break;
1767 }
1768 }
1769
1770 /* Parse the line number info for file descriptor FH into
1771 GDB's linetable LT. MIPS' encoding requires a little bit
1772 of magic to get things out. Note also that MIPS' line
1773 numbers can go back and forth, apparently we can live
1774 with that and do not need to reorder our linetables */
1775
1776 static void
1777 parse_lines(fh, lt)
1778 FDR *fh;
1779 struct linetable *lt;
1780 {
1781 unsigned char *base = (unsigned char*)fh->cbLineOffset;
1782 int j, k;
1783 int delta, count, lineno = 0;
1784 PDR *pr;
1785
1786 if (base == 0)
1787 return;
1788
1789 /* Scan by procedure descriptors */
1790 j = 0, k = 0;
1791 for (pr = (PDR*)IPDFIRST(cur_hdr,fh); j < fh->cpd; j++, pr++) {
1792 int l, halt;
1793
1794 /* No code for this one */
1795 if (pr->iline == ilineNil ||
1796 pr->lnLow == -1 || pr->lnHigh == -1)
1797 continue;
1798 /*
1799 * Aurgh! To know where to stop expanding we
1800 * must look-ahead.
1801 */
1802 for (l = 1; l < (fh->cpd - j); l++)
1803 if (pr[l].iline != -1)
1804 break;
1805 if (l == (fh->cpd - j))
1806 halt = fh->cline;
1807 else
1808 halt = pr[l].iline;
1809 /*
1810 * When procedures are moved around the linenumbers
1811 * are attributed to the next procedure up
1812 */
1813 if (pr->iline >= halt) continue;
1814
1815 base = (unsigned char*)pr->cbLineOffset;
1816 l = pr->adr >> 2; /* in words */
1817 halt += (pr->adr >> 2) - pr->iline;
1818 for (lineno = pr->lnLow; l < halt;) {
1819 count = *base & 0x0f;
1820 delta = *base++ >> 4;
1821 if (delta >= 8)
1822 delta -= 16;
1823 if (delta == -8) {
1824 delta = (base[0] << 8) | base[1];
1825 if (delta >= 0x8000)
1826 delta -= 0x10000;
1827 base += 2;
1828 }
1829 lineno += delta;/* first delta is 0 */
1830 k = add_line(lt, lineno, l, k);
1831 l += count + 1;
1832 }
1833 }
1834 }
1835 \f
1836 /* Master parsing procedure for first-pass reading of file symbols
1837 into a partial_symtab.
1838
1839 Parses the symtab described by the global symbolic header CUR_HDR.
1840 END_OF_TEXT_SEG gives the address just after the text segment for
1841 the symtab we are reading. */
1842
1843 static void
1844 parse_partial_symbols (end_of_text_seg, objfile, section_offsets)
1845 int end_of_text_seg;
1846 struct objfile *objfile;
1847 struct section_offsets *section_offsets;
1848 {
1849 int f_idx, s_idx;
1850 HDRR *hdr = cur_hdr;
1851 /* Running pointers */
1852 FDR *fh;
1853 register EXTR *esh;
1854 register SYMR *sh;
1855 struct partial_symtab *pst;
1856
1857 int past_first_source_file = 0;
1858
1859 /* List of current psymtab's include files */
1860 char **psymtab_include_list;
1861 int includes_allocated;
1862 int includes_used;
1863 EXTR **extern_tab;
1864 struct pst_map * fdr_to_pst;
1865 /* Index within current psymtab dependency list */
1866 struct partial_symtab **dependency_list;
1867 int dependencies_used, dependencies_allocated;
1868 struct cleanup *old_chain;
1869 char *name;
1870
1871 extern_tab = (EXTR**)obstack_alloc (&objfile->psymbol_obstack,
1872 sizeof(EXTR *) * hdr->iextMax);
1873
1874 includes_allocated = 30;
1875 includes_used = 0;
1876 psymtab_include_list = (char **) alloca (includes_allocated *
1877 sizeof (char *));
1878 next_symbol_text_func = mips_next_symbol_text;
1879
1880 dependencies_allocated = 30;
1881 dependencies_used = 0;
1882 dependency_list =
1883 (struct partial_symtab **) alloca (dependencies_allocated *
1884 sizeof (struct partial_symtab *));
1885
1886 last_source_file = NULL;
1887
1888 /*
1889 * Big plan:
1890 *
1891 * Only parse the Local and External symbols, and the Relative FDR.
1892 * Fixup enough of the loader symtab to be able to use it.
1893 * Allocate space only for the file's portions we need to
1894 * look at. (XXX)
1895 */
1896
1897 max_gdbinfo = 0;
1898 max_glevel = MIN_GLEVEL;
1899
1900 /* Allocate the map FDR -> PST.
1901 Minor hack: -O3 images might claim some global data belongs
1902 to FDR -1. We`ll go along with that */
1903 fdr_to_pst = (struct pst_map *)xzalloc((hdr->ifdMax+1) * sizeof *fdr_to_pst);
1904 old_chain = make_cleanup (free, fdr_to_pst);
1905 fdr_to_pst++;
1906 {
1907 struct partial_symtab * pst = new_psymtab("", objfile);
1908 fdr_to_pst[-1].pst = pst;
1909 FDR_IDX(pst) = -1;
1910 }
1911
1912 /* Pass 1 over external syms: Presize and partition the list */
1913 for (s_idx = 0; s_idx < hdr->iextMax; s_idx++) {
1914 esh = (EXTR *) (hdr->cbExtOffset) + s_idx;
1915 fdr_to_pst[esh->ifd].n_globals++;
1916 }
1917
1918 /* Pass 1.5 over files: partition out global symbol space */
1919 s_idx = 0;
1920 for (f_idx = -1; f_idx < hdr->ifdMax; f_idx++) {
1921 fdr_to_pst[f_idx].globals_offset = s_idx;
1922 s_idx += fdr_to_pst[f_idx].n_globals;
1923 fdr_to_pst[f_idx].n_globals = 0;
1924 }
1925
1926 /* Pass 2 over external syms: fill in external symbols */
1927 for (s_idx = 0; s_idx < hdr->iextMax; s_idx++) {
1928 enum minimal_symbol_type ms_type = mst_text;
1929 esh = (EXTR *) (hdr->cbExtOffset) + s_idx;
1930
1931 extern_tab[fdr_to_pst[esh->ifd].globals_offset
1932 + fdr_to_pst[esh->ifd].n_globals++] = esh;
1933
1934 if (esh->asym.sc == scUndefined || esh->asym.sc == scNil)
1935 continue;
1936
1937 switch (esh->asym.st) {
1938 case stProc:
1939 break;
1940 case stGlobal:
1941 ms_type = mst_data;
1942 break;
1943 case stLabel:
1944 break;
1945 default:
1946 ms_type = mst_unknown;
1947 complain (&unknown_ext_complaint, esh->asym.iss);
1948 }
1949 name = (char *)esh->asym.iss;
1950 prim_record_minimal_symbol (name, esh->asym.value, ms_type);
1951 }
1952
1953 /* Pass 3 over files, over local syms: fill in static symbols */
1954 for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++) {
1955 struct partial_symtab *save_pst;
1956 EXTR **ext_ptr;
1957
1958 cur_fdr = fh = f_idx + (FDR *)(cur_hdr->cbFdOffset);
1959
1960 if (fh->csym == 0) {
1961 fdr_to_pst[f_idx].pst = NULL;
1962 continue;
1963 }
1964 pst = start_psymtab_common (objfile, section_offsets, (char*)fh->rss,
1965 fh->cpd ? fh->adr : 0,
1966 objfile->global_psymbols.next,
1967 objfile->static_psymbols.next);
1968 pst->read_symtab_private = (char *)
1969 obstack_alloc (&objfile->psymbol_obstack, sizeof (struct symloc));
1970
1971 save_pst = pst;
1972 /* Make everything point to everything. */
1973 FDR_IDX(pst) = f_idx;
1974 fdr_to_pst[f_idx].pst = pst;
1975 fh->ioptBase = (int)pst;
1976
1977 CUR_HDR(pst) = cur_hdr;
1978
1979 /* The way to turn this into a symtab is to call... */
1980 pst->read_symtab = mipscoff_psymtab_to_symtab;
1981
1982 pst->texthigh = pst->textlow;
1983
1984 /* For stabs-in-ecoff files, the second symbol must be @stab.
1985 This symbol is emitted by mips-tfile to signal
1986 that the current object file uses encapsulated stabs
1987 instead of mips ecoff for local symbols.
1988 (It is the second symbol because the first symbol is
1989 the stFile used to signal the start of a file). */
1990 if (fh->csym >= 2
1991 && STREQ((char *)(((SYMR *)fh->isymBase)[1].iss), stabs_symbol)) {
1992 processing_gcc_compilation = 2;
1993 for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++) {
1994 int type_code;
1995 char *namestring;
1996 sh = cur_sdx + (SYMR *) fh->isymBase;
1997 type_code = MIPS_UNMARK_STAB(sh->index);
1998 if (!MIPS_IS_STAB(sh)) {
1999 if (sh->st == stProc || sh->st == stStaticProc) {
2000 long procaddr = sh->value;
2001 sh = AUX_GET_ISYM (fh->fBigendian,
2002 sh->index + (union aux_ext *)(fh->iauxBase))
2003 + (SYMR *) fh->isymBase - 1;
2004 if (sh->st == stEnd) {
2005 long high = procaddr + sh->value;
2006 if (high > pst->texthigh)
2007 pst->texthigh = high;
2008 }
2009 }
2010 continue;
2011 }
2012 #define SET_NAMESTRING() namestring = (char*)sh->iss
2013 #define CUR_SYMBOL_TYPE type_code
2014 #define CUR_SYMBOL_VALUE sh->value
2015 #define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
2016 pst = save_pst
2017 #define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps) (void)0
2018 #define HANDLE_RBRAC(val) \
2019 if ((val) > save_pst->texthigh) save_pst->texthigh = (val);
2020 #include "partial-stab.h"
2021 }
2022 }
2023 else {
2024 processing_gcc_compilation = 0;
2025 for (cur_sdx = 0; cur_sdx < fh->csym; ) {
2026 char *name;
2027 enum address_class class;
2028 sh = cur_sdx + (SYMR *) fh->isymBase;
2029
2030 if (MIPS_IS_STAB(sh)) {
2031 cur_sdx++;
2032 continue;
2033 }
2034
2035 if (sh->sc == scUndefined || sh->sc == scNil ||
2036 sh->index == 0xfffff) {
2037 /* FIXME, premature? */
2038 cur_sdx++;
2039 continue;
2040 }
2041
2042 name = (char *)(sh->iss);
2043
2044 switch (sh->st) {
2045 long high;
2046 long procaddr;
2047 int new_sdx;
2048
2049 case stProc: /* Asm labels apparently */
2050 case stStaticProc: /* Function */
2051 ADD_PSYMBOL_TO_LIST(name, strlen(name),
2052 VAR_NAMESPACE, LOC_BLOCK,
2053 objfile->static_psymbols, sh->value,
2054 psymtab_language, objfile);
2055 /* Skip over procedure to next one. */
2056 if (sh->index >= hdr->iauxMax)
2057 {
2058 /* Should not happen, but does when cross-compiling
2059 with the MIPS compiler. FIXME -- pull later. */
2060 complain (&index_complaint, name);
2061 new_sdx = cur_sdx+1; /* Don't skip at all */
2062 }
2063 else
2064 new_sdx = AUX_GET_ISYM (fh->fBigendian,
2065 sh->index + (union aux_ext *)fh->iauxBase);
2066 procaddr = sh->value;
2067
2068 if (new_sdx <= cur_sdx)
2069 {
2070 /* This should not happen either... FIXME. */
2071 complain (&aux_index_complaint, name);
2072 new_sdx = cur_sdx + 1; /* Don't skip backward */
2073 }
2074
2075 cur_sdx = new_sdx;
2076 sh = cur_sdx + (SYMR *) fh->isymBase - 1;
2077 if (sh->st != stEnd)
2078 continue;
2079 high = procaddr + sh->value;
2080 if (high > pst->texthigh)
2081 pst->texthigh = high;
2082 continue;
2083
2084 case stStatic: /* Variable */
2085 class = LOC_STATIC;
2086 break;
2087
2088 case stTypedef: /* Typedef */
2089 class = LOC_TYPEDEF;
2090 break;
2091
2092 case stConstant: /* Constant decl */
2093 class = LOC_CONST;
2094 break;
2095
2096 case stUnion:
2097 case stStruct:
2098 case stEnum:
2099 case stBlock: /* { }, str, un, enum*/
2100 if (sh->sc == scInfo) {
2101 ADD_PSYMBOL_TO_LIST(name, strlen(name),
2102 STRUCT_NAMESPACE, LOC_TYPEDEF,
2103 objfile->static_psymbols,
2104 sh->value,
2105 psymtab_language, objfile);
2106 }
2107 /* Skip over the block */
2108 cur_sdx = sh->index;
2109 continue;
2110
2111 case stFile: /* File headers */
2112 case stLabel: /* Labels */
2113 case stEnd: /* Ends of files */
2114 goto skip;
2115
2116 case stLocal: /* Local variables */
2117 /* Normally these are skipped because we skip over
2118 all blocks we see. However, these can occur
2119 as visible symbols in a .h file that contains code. */
2120 goto skip;
2121
2122 default:
2123 /* Both complaints are valid: one gives symbol name,
2124 the other the offending symbol type. */
2125 complain (&unknown_sym_complaint, sh->iss);
2126 complain (&unknown_st_complaint, sh->st);
2127 cur_sdx++;
2128 continue;
2129 }
2130 /* Use this gdb symbol */
2131 ADD_PSYMBOL_TO_LIST(name, strlen(name),
2132 VAR_NAMESPACE, class,
2133 objfile->static_psymbols, sh->value,
2134 psymtab_language, objfile);
2135 skip:
2136 cur_sdx++; /* Go to next file symbol */
2137 }
2138
2139 /* Now do enter the external symbols. */
2140 ext_ptr = &extern_tab[fdr_to_pst[f_idx].globals_offset];
2141 cur_sdx = fdr_to_pst[f_idx].n_globals;
2142 PST_PRIVATE(save_pst)->extern_count = cur_sdx;
2143 PST_PRIVATE(save_pst)->extern_tab = ext_ptr;
2144 for (; --cur_sdx >= 0; ext_ptr++) {
2145 register struct partial_symbol *psym;
2146 enum address_class class;
2147
2148 if ((*ext_ptr)->ifd != f_idx)
2149 abort();
2150 sh = &(*ext_ptr)->asym;
2151 switch (sh->st) {
2152 case stProc:
2153 class = LOC_BLOCK;
2154 break;
2155 case stLabel:
2156 class = LOC_LABEL;
2157 break;
2158 default:
2159 complain (&unknown_ext_complaint, sh->iss);
2160 /* Fall through, pretend it's global. */
2161 case stGlobal:
2162 class = LOC_STATIC;
2163 break;
2164 }
2165 if (objfile->global_psymbols.next >=
2166 objfile->global_psymbols.list + objfile->global_psymbols.size)
2167 extend_psymbol_list (&objfile->global_psymbols, objfile);
2168 psym = objfile->global_psymbols.next++;
2169 SYMBOL_NAME (psym) = (char*)sh->iss;
2170 SYMBOL_NAMESPACE (psym) = VAR_NAMESPACE;
2171 SYMBOL_CLASS (psym) = class;
2172 SYMBOL_VALUE_ADDRESS (psym) = (CORE_ADDR)sh->value;
2173 }
2174 }
2175
2176 end_psymtab (save_pst, psymtab_include_list, includes_used,
2177 -1, save_pst->texthigh,
2178 dependency_list, dependencies_used);
2179 if (objfile -> ei.entry_point >= save_pst->textlow &&
2180 objfile -> ei.entry_point < save_pst->texthigh)
2181 {
2182 objfile -> ei.entry_file_lowpc = save_pst->textlow;
2183 objfile -> ei.entry_file_highpc = save_pst->texthigh;
2184 }
2185 }
2186
2187 /* Mark the last code address, and remember it for later */
2188 hdr->cbDnOffset = end_of_text_seg;
2189
2190 /* Now scan the FDRs for dependencies */
2191 for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++) {
2192 int s_id0 = 0;
2193 fh = f_idx + (FDR *)(cur_hdr->cbFdOffset);
2194 pst = fdr_to_pst[f_idx].pst;
2195
2196 /* This should catch stabs-in-ecoff. */
2197 if (fh->crfd <= 1)
2198 continue;
2199
2200 if (fh->cpd == 0) { /* If there are no functions defined here ... */
2201 /* ...then presumably a .h file: drop reverse depends .h->.c */
2202 for (; s_id0 < fh->crfd; s_id0++) {
2203 RFDT *rh = (RFDT *) (fh->rfdBase) + s_id0;
2204 if (*rh == f_idx) {
2205 s_id0++; /* Skip self-dependency */
2206 break;
2207 }
2208 }
2209 }
2210 pst->number_of_dependencies = fh->crfd - s_id0;
2211 pst->dependencies = (struct partial_symtab **)
2212 obstack_alloc (&objfile->psymbol_obstack,
2213 pst->number_of_dependencies *
2214 sizeof (struct partial_symtab *));
2215 for (s_idx = s_id0; s_idx < fh->crfd; s_idx++) {
2216 RFDT *rh = (RFDT *) (fh->rfdBase) + s_idx;
2217 if (*rh < 0 || *rh >= hdr->ifdMax)
2218 complain(&bad_file_number_complaint, *rh);
2219 else
2220 pst->dependencies[s_idx-s_id0] = fdr_to_pst[*rh].pst;
2221 }
2222 }
2223 do_cleanups (old_chain);
2224 }
2225
2226
2227 #if 0
2228 /* Do the initial analisys of the F_IDX-th file descriptor.
2229 Allocates a partial symtab for it, and builds the list
2230 of dependent files by recursion. LEV says at which level
2231 of recursion we are called (to pretty up debug traces) */
2232
2233 static struct partial_symtab *
2234 parse_fdr(f_idx, lev, objfile)
2235 int f_idx;
2236 int lev;
2237 struct objfile *objfile;
2238 {
2239 register FDR *fh;
2240 register struct partial_symtab *pst;
2241 int s_idx, s_id0;
2242
2243 fh = (FDR *) (cur_hdr->cbFdOffset) + f_idx;
2244
2245 /* Use this to indicate into which symtab this file was parsed */
2246 if (fh->ioptBase)
2247 return (struct partial_symtab *) fh->ioptBase;
2248
2249 /* Debuggability level */
2250 if (compare_glevel(max_glevel, fh->glevel) < 0)
2251 max_glevel = fh->glevel;
2252
2253 /* Make a new partial_symtab */
2254 pst = new_psymtab(fh->rss, objfile);
2255 if (fh->cpd == 0){
2256 pst->textlow = 0;
2257 pst->texthigh = 0;
2258 } else {
2259 pst->textlow = fh->adr;
2260 pst->texthigh = fh->cpd; /* To be fixed later */
2261 }
2262
2263 /* Make everything point to everything. */
2264 FDR_IDX(pst) = f_idx;
2265 fdr_to_pst[f_idx].pst = pst;
2266 fh->ioptBase = (int)pst;
2267
2268 /* Analyze its dependencies */
2269 if (fh->crfd <= 1)
2270 return pst;
2271
2272 s_id0 = 0;
2273 if (fh->cpd == 0) { /* If there are no functions defined here ... */
2274 /* ...then presumably a .h file: drop reverse depends .h->.c */
2275 for (; s_id0 < fh->crfd; s_id0++) {
2276 RFDT *rh = (RFDT *) (fh->rfdBase) + s_id0;
2277 if (*rh == f_idx) {
2278 s_id0++; /* Skip self-dependency */
2279 break;
2280 }
2281 }
2282 }
2283 pst->number_of_dependencies = fh->crfd - s_id0;
2284 pst->dependencies = (struct partial_symtab **)
2285 obstack_alloc (&objfile->psymbol_obstack,
2286 pst->number_of_dependencies *
2287 sizeof (struct partial_symtab *));
2288 for (s_idx = s_id0; s_idx < fh->crfd; s_idx++) {
2289 RFDT *rh = (RFDT *) (fh->rfdBase) + s_idx;
2290
2291 pst->dependencies[s_idx-s_id0] = parse_fdr(*rh, lev+1, objfile);
2292 }
2293
2294 return pst;
2295 }
2296 #endif
2297
2298 static char*
2299 mips_next_symbol_text ()
2300 {
2301 cur_sdx++;
2302 return (char*)((SYMR *)cur_fdr->isymBase)[cur_sdx].iss;
2303 }
2304
2305 /* Ancillary function to psymtab_to_symtab(). Does all the work
2306 for turning the partial symtab PST into a symtab, recurring
2307 first on all dependent psymtabs. The argument FILENAME is
2308 only passed so we can see in debug stack traces what file
2309 is being read.
2310
2311 This function has a split personality, based on whether the
2312 symbol table contains ordinary ecoff symbols, or stabs-in-ecoff.
2313 The flow of control and even the memory allocation differs. FIXME. */
2314
2315 static void
2316 psymtab_to_symtab_1(pst, filename)
2317 struct partial_symtab *pst;
2318 char *filename;
2319 {
2320 int i;
2321 struct symtab *st;
2322 FDR *fh;
2323 struct linetable *lines;
2324 int bound;
2325
2326 if (pst->readin)
2327 return;
2328 pst->readin = 1;
2329
2330 /* Read in all partial symbtabs on which this one is dependent.
2331 NOTE that we do have circular dependencies, sigh. We solved
2332 that by setting pst->readin before this point. */
2333
2334 for (i = 0; i < pst->number_of_dependencies; i++)
2335 if (!pst->dependencies[i]->readin) {
2336 /* Inform about additional files to be read in. */
2337 if (info_verbose)
2338 {
2339 fputs_filtered (" ", stdout);
2340 wrap_here ("");
2341 fputs_filtered ("and ", stdout);
2342 wrap_here ("");
2343 printf_filtered ("%s...",
2344 pst->dependencies[i]->filename);
2345 wrap_here (""); /* Flush output */
2346 fflush (stdout);
2347 }
2348 /* We only pass the filename for debug purposes */
2349 psymtab_to_symtab_1(pst->dependencies[i],
2350 pst->dependencies[i]->filename);
2351 }
2352
2353 /* Now read the symbols for this symtab */
2354
2355 current_objfile = pst->objfile;
2356 cur_fd = FDR_IDX(pst);
2357 fh = (cur_fd == -1) ? 0 : (FDR *) (cur_hdr->cbFdOffset) + FDR_IDX(pst);
2358 cur_fdr = fh;
2359
2360 /* BOUND is the highest core address of this file's procedures */
2361 bound = (cur_fd == cur_hdr->ifdMax - 1) ?
2362 cur_hdr->cbDnOffset :
2363 fh[1].adr;
2364
2365 /* See comment in parse_partial_symbols about the @stabs sentinel. */
2366 if (fh && fh->csym >= 2
2367 && STREQ((char *)(((SYMR *)fh->isymBase)[1].iss), stabs_symbol)) {
2368
2369 /*
2370 * This symbol table contains stabs-in-ecoff entries.
2371 */
2372
2373 PDR *pr;
2374
2375 /* We indicate that this is a GCC compilation so that certain features
2376 will be enabled in stabsread/dbxread. */
2377 processing_gcc_compilation = 2;
2378 /* Parse local symbols first */
2379
2380 if (fh->csym <= 2) /* FIXME, this blows psymtab->symtab ptr */
2381 {
2382 current_objfile = NULL;
2383 return;
2384 }
2385 for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++) {
2386 register SYMR *sh = cur_sdx + (SYMR *) fh->isymBase;
2387 char *name = (char*)sh->iss;
2388 CORE_ADDR valu = sh->value;
2389 if (MIPS_IS_STAB(sh)) {
2390 int type_code = MIPS_UNMARK_STAB(sh->index);
2391 process_one_symbol (type_code, 0, valu, name,
2392 pst->section_offsets, pst->objfile);
2393 if (type_code == N_FUN) {
2394 /* Make up special symbol to contain
2395 procedure specific info */
2396 struct mips_extra_func_info *e =
2397 (struct mips_extra_func_info *)
2398 obstack_alloc(&current_objfile->symbol_obstack,
2399 sizeof(struct mips_extra_func_info));
2400 struct symbol *s = new_symbol(MIPS_EFI_SYMBOL_NAME);
2401 SYMBOL_NAMESPACE(s) = LABEL_NAMESPACE;
2402 SYMBOL_CLASS(s) = LOC_CONST;
2403 SYMBOL_TYPE(s) = builtin_type_void;
2404 SYMBOL_VALUE(s) = (int)e;
2405 add_symbol_to_list (s, &local_symbols);
2406 }
2407 }
2408 else if (sh->st == stLabel && sh->index != indexNil) {
2409 /* Handle encoded stab line number. */
2410 record_line (current_subfile, sh->index, valu);
2411 }
2412 else complain (&stab_unknown_complaint, sh->iss);
2413 }
2414 st = end_symtab (pst->texthigh, 0, 0, pst->objfile);
2415 end_stabs ();
2416
2417 /* Sort the symbol table now, we are done adding symbols to it.
2418 We must do this before parse_procedure calls lookup_symbol. */
2419 sort_symtab_syms(st);
2420
2421 /* This may not be necessary for stabs symtabs. FIXME. */
2422 sort_blocks (st);
2423
2424 /* Fill in procedure info next. We need to look-ahead to
2425 find out where each procedure's code ends. */
2426
2427 for (i = 0; i <= fh->cpd-1; i++) {
2428 pr = (PDR *) (IPDFIRST(cur_hdr, fh)) + i;
2429 parse_procedure (pr, i < fh->cpd-1 ? pr[1].adr : bound, 1);
2430 }
2431 } else {
2432
2433 /*
2434 * This symbol table contains ordinary ecoff entries.
2435 */
2436
2437 /* FIXME: doesn't use pst->section_offsets. */
2438
2439 int f_max;
2440 int maxlines;
2441 EXTR **ext_ptr;
2442
2443 processing_gcc_compilation = 0;
2444
2445 /* How many symbols will we need */
2446 /* FIXME, this does not count enum values. */
2447 f_max = pst->n_global_syms + pst->n_static_syms;
2448 if (fh == 0) {
2449 maxlines = 0;
2450 st = new_symtab ("unknown", f_max, 0, pst->objfile);
2451 } else {
2452 f_max += fh->csym + fh->cpd;
2453 maxlines = 2 * fh->cline;
2454 st = new_symtab (pst->filename, 2 * f_max, maxlines, pst->objfile);
2455 }
2456
2457 lines = LINETABLE(st);
2458 pending_list = (struct mips_pending **) cur_hdr->cbOptOffset;
2459 if (pending_list == 0) {
2460 pending_list = (struct mips_pending **)
2461 xzalloc(cur_hdr->ifdMax * sizeof(struct mips_pending *));
2462 cur_hdr->cbOptOffset = (int)pending_list;
2463 }
2464
2465 /* Get a new lexical context */
2466
2467 push_parse_stack();
2468 top_stack->cur_st = st;
2469 top_stack->cur_block = BLOCKVECTOR_BLOCK(BLOCKVECTOR(st),
2470 STATIC_BLOCK);
2471 BLOCK_START(top_stack->cur_block) = fh ? fh->adr : 0;
2472 BLOCK_END(top_stack->cur_block) = 0;
2473 top_stack->blocktype = stFile;
2474 top_stack->maxsyms = 2*f_max;
2475 top_stack->cur_type = 0;
2476 top_stack->procadr = 0;
2477 top_stack->numargs = 0;
2478
2479 if (fh) {
2480 SYMR *sh;
2481 PDR *pr;
2482
2483 /* Parse local symbols first */
2484
2485 for (cur_sdx = 0; cur_sdx < fh->csym; ) {
2486 sh = (SYMR *) (fh->isymBase) + cur_sdx;
2487 cur_sdx += parse_symbol(sh, (union aux_ext *)fh->iauxBase,
2488 fh->fBigendian);
2489 }
2490
2491 /* Linenumbers. At the end, check if we can save memory */
2492
2493 parse_lines(fh, lines);
2494 if (lines->nitems < fh->cline)
2495 lines = shrink_linetable(lines);
2496
2497 /* Fill in procedure info next. We need to look-ahead to
2498 find out where each procedure's code ends. */
2499
2500 for (i = 0; i <= fh->cpd-1; i++) {
2501 pr = (PDR *) (IPDFIRST(cur_hdr, fh)) + i;
2502 parse_procedure(pr, i < fh->cpd-1 ? pr[1].adr : bound, 0);
2503 }
2504 }
2505
2506 LINETABLE(st) = lines;
2507
2508 /* .. and our share of externals.
2509 XXX use the global list to speed up things here. how?
2510 FIXME, Maybe quit once we have found the right number of ext's? */
2511 top_stack->cur_st = st;
2512 top_stack->cur_block = BLOCKVECTOR_BLOCK(BLOCKVECTOR(top_stack->cur_st),
2513 GLOBAL_BLOCK);
2514 top_stack->blocktype = stFile;
2515 top_stack->maxsyms =
2516 cur_hdr->isymMax + cur_hdr->ipdMax + cur_hdr->iextMax;
2517
2518 ext_ptr = PST_PRIVATE(pst)->extern_tab;
2519 for (i = PST_PRIVATE(pst)->extern_count; --i >= 0; ext_ptr++)
2520 parse_external(*ext_ptr, 1, fh->fBigendian);
2521
2522 /* If there are undefined, tell the user */
2523 if (n_undef_symbols) {
2524 printf_filtered("File %s contains %d unresolved references:",
2525 st->filename, n_undef_symbols);
2526 printf_filtered("\n\t%4d variables\n\t%4d procedures\n\t%4d labels\n",
2527 n_undef_vars, n_undef_procs, n_undef_labels);
2528 n_undef_symbols = n_undef_labels = n_undef_vars = n_undef_procs = 0;
2529
2530 }
2531 pop_parse_stack();
2532
2533 /* Sort the symbol table now, we are done adding symbols to it.*/
2534 sort_symtab_syms(st);
2535
2536 sort_blocks (st);
2537 }
2538
2539 /* Now link the psymtab and the symtab. */
2540 pst->symtab = st;
2541
2542 current_objfile = NULL;
2543 }
2544 \f
2545 /* Ancillary parsing procedures. */
2546
2547 /* Lookup the type at relative index RN. Return it in TPP
2548 if found and in any event come up with its name PNAME.
2549 BIGEND says whether aux symbols are big-endian or not (from fh->fBigendian).
2550 Return value says how many aux symbols we ate. */
2551
2552 static int
2553 cross_ref(ax, tpp, type_code, pname, bigend)
2554 union aux_ext *ax;
2555 struct type **tpp;
2556 enum type_code type_code; /* Use to alloc new type if none is found. */
2557 char **pname;
2558 int bigend;
2559 {
2560 RNDXR rn[1];
2561 unsigned rf;
2562 int result = 1;
2563
2564 ecoff_swap_rndx_in (bigend, ax, rn);
2565
2566 /* Escape index means 'the next one' */
2567 if (rn->rfd == 0xfff) {
2568 result++;
2569 rf = AUX_GET_ISYM (bigend, ax + 1);
2570 } else {
2571 rf = rn->rfd;
2572 }
2573
2574 if (rf == -1) {
2575 /* Ooops */
2576 *pname = "<undefined>";
2577 } else {
2578 /*
2579 * Find the relative file descriptor and the symbol in it
2580 */
2581 FDR *fh = get_rfd(cur_fd, rf);
2582 SYMR *sh;
2583 struct type *t;
2584
2585 /*
2586 * If we have processed this symbol then we left a forwarding
2587 * pointer to the corresponding GDB symbol. If not, we`ll put
2588 * it in a list of pending symbols, to be processed later when
2589 * the file f will be. In any event, we collect the name for
2590 * the type here. Which is why we made a first pass at
2591 * strings.
2592 */
2593 sh = (SYMR *) (fh->isymBase) + rn->index;
2594
2595 /* Careful, we might be looking at .o files */
2596 *pname = (UNSAFE_DATA_ADDR(sh->iss)) ? "<undefined>" :
2597 (char *) sh->iss;
2598
2599 /* Have we parsed it ? */
2600 if ((!UNSAFE_DATA_ADDR(sh->value)) && (sh->st == stParsed)) {
2601 t = (struct type *) sh->value;
2602 *tpp = t;
2603 } else {
2604 /* Avoid duplicates */
2605 struct mips_pending *p = is_pending_symbol(fh, sh);
2606 if (p)
2607 *tpp = p->t;
2608 else {
2609 *tpp = init_type(type_code, 0, 0, (char *) NULL,
2610 (struct objfile *) NULL);
2611 add_pending(fh, sh, *tpp);
2612 }
2613 }
2614 }
2615
2616 /* We used one auxent normally, two if we got a "next one" rf. */
2617 return result;
2618 }
2619
2620
2621 /* Quick&dirty lookup procedure, to avoid the MI ones that require
2622 keeping the symtab sorted */
2623
2624 static struct symbol *
2625 mylookup_symbol (name, block, namespace, class)
2626 char *name;
2627 register struct block *block;
2628 enum namespace namespace;
2629 enum address_class class;
2630 {
2631 register int bot, top, inc;
2632 register struct symbol *sym;
2633
2634 bot = 0;
2635 top = BLOCK_NSYMS(block);
2636 inc = name[0];
2637 while (bot < top) {
2638 sym = BLOCK_SYM(block, bot);
2639 if (SYMBOL_NAME(sym)[0] == inc
2640 && SYMBOL_NAMESPACE(sym) == namespace
2641 && SYMBOL_CLASS(sym) == class
2642 && STREQ(SYMBOL_NAME(sym), name))
2643 return sym;
2644 bot++;
2645 }
2646 block = BLOCK_SUPERBLOCK (block);
2647 if (block)
2648 return mylookup_symbol (name, block, namespace, class);
2649 return 0;
2650 }
2651
2652
2653 /* Add a new symbol S to a block B.
2654 Infrequently, we will need to reallocate the block to make it bigger.
2655 We only detect this case when adding to top_stack->cur_block, since
2656 that's the only time we know how big the block is. FIXME. */
2657
2658 static void
2659 add_symbol(s,b)
2660 struct symbol *s;
2661 struct block *b;
2662 {
2663 int nsyms = BLOCK_NSYMS(b)++;
2664 struct block *origb;
2665 struct parse_stack *stackp;
2666
2667 if (b == top_stack->cur_block &&
2668 nsyms >= top_stack->maxsyms) {
2669 complain (&block_overflow_complaint, SYMBOL_NAME (s));
2670 /* In this case shrink_block is actually grow_block, since
2671 BLOCK_NSYMS(b) is larger than its current size. */
2672 origb = b;
2673 b = shrink_block (top_stack->cur_block, top_stack->cur_st);
2674
2675 /* Now run through the stack replacing pointers to the
2676 original block. shrink_block has already done this
2677 for the blockvector and BLOCK_FUNCTION. */
2678 for (stackp = top_stack; stackp; stackp = stackp->next) {
2679 if (stackp->cur_block == origb) {
2680 stackp->cur_block = b;
2681 stackp->maxsyms = BLOCK_NSYMS (b);
2682 }
2683 }
2684 }
2685 BLOCK_SYM(b,nsyms) = s;
2686 }
2687
2688 /* Add a new block B to a symtab S */
2689
2690 static void
2691 add_block(b,s)
2692 struct block *b;
2693 struct symtab *s;
2694 {
2695 struct blockvector *bv = BLOCKVECTOR(s);
2696
2697 bv = (struct blockvector *)xrealloc((PTR) bv,
2698 sizeof(struct blockvector) +
2699 BLOCKVECTOR_NBLOCKS(bv)
2700 * sizeof(bv->block));
2701 if (bv != BLOCKVECTOR(s))
2702 BLOCKVECTOR(s) = bv;
2703
2704 BLOCKVECTOR_BLOCK(bv, BLOCKVECTOR_NBLOCKS(bv)++) = b;
2705 }
2706
2707 /* Add a new linenumber entry (LINENO,ADR) to a linevector LT.
2708 MIPS' linenumber encoding might need more than one byte
2709 to describe it, LAST is used to detect these continuation lines */
2710
2711 static int
2712 add_line(lt, lineno, adr, last)
2713 struct linetable *lt;
2714 int lineno;
2715 CORE_ADDR adr;
2716 int last;
2717 {
2718 if (last == 0)
2719 last = -2; /* make sure we record first line */
2720
2721 if (last == lineno) /* skip continuation lines */
2722 return lineno;
2723
2724 lt->item[lt->nitems].line = lineno;
2725 lt->item[lt->nitems++].pc = adr << 2;
2726 return lineno;
2727 }
2728 \f
2729 /* Sorting and reordering procedures */
2730
2731 /* Blocks with a smaller low bound should come first */
2732
2733 static int
2734 compare_blocks(arg1, arg2)
2735 const void *arg1, *arg2;
2736 {
2737 register int addr_diff;
2738 struct block **b1 = (struct block **) arg1;
2739 struct block **b2 = (struct block **) arg2;
2740
2741 addr_diff = (BLOCK_START((*b1))) - (BLOCK_START((*b2)));
2742 if (addr_diff == 0)
2743 return (BLOCK_END((*b1))) - (BLOCK_END((*b2)));
2744 return addr_diff;
2745 }
2746
2747 /* Sort the blocks of a symtab S.
2748 Reorder the blocks in the blockvector by code-address,
2749 as required by some MI search routines */
2750
2751 static void
2752 sort_blocks(s)
2753 struct symtab *s;
2754 {
2755 struct blockvector *bv = BLOCKVECTOR(s);
2756
2757 if (BLOCKVECTOR_NBLOCKS(bv) <= 2) {
2758 /* Cosmetic */
2759 if (BLOCK_END(BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK)) == 0)
2760 BLOCK_START(BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK)) = 0;
2761 if (BLOCK_END(BLOCKVECTOR_BLOCK(bv,STATIC_BLOCK)) == 0)
2762 BLOCK_START(BLOCKVECTOR_BLOCK(bv,STATIC_BLOCK)) = 0;
2763 return;
2764 }
2765 /*
2766 * This is very unfortunate: normally all functions are compiled in
2767 * the order they are found, but if the file is compiled -O3 things
2768 * are very different. It would be nice to find a reliable test
2769 * to detect -O3 images in advance.
2770 */
2771 if (BLOCKVECTOR_NBLOCKS(bv) > 3)
2772 qsort(&BLOCKVECTOR_BLOCK(bv,FIRST_LOCAL_BLOCK),
2773 BLOCKVECTOR_NBLOCKS(bv) - FIRST_LOCAL_BLOCK,
2774 sizeof(struct block *),
2775 compare_blocks);
2776
2777 {
2778 register CORE_ADDR high = 0;
2779 register int i, j = BLOCKVECTOR_NBLOCKS(bv);
2780
2781 for (i = FIRST_LOCAL_BLOCK; i < j; i++)
2782 if (high < BLOCK_END(BLOCKVECTOR_BLOCK(bv,i)))
2783 high = BLOCK_END(BLOCKVECTOR_BLOCK(bv,i));
2784 BLOCK_END(BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK)) = high;
2785 }
2786
2787 BLOCK_START(BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK)) =
2788 BLOCK_START(BLOCKVECTOR_BLOCK(bv,FIRST_LOCAL_BLOCK));
2789
2790 BLOCK_START(BLOCKVECTOR_BLOCK(bv,STATIC_BLOCK)) =
2791 BLOCK_START(BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK));
2792 BLOCK_END (BLOCKVECTOR_BLOCK(bv,STATIC_BLOCK)) =
2793 BLOCK_END (BLOCKVECTOR_BLOCK(bv,GLOBAL_BLOCK));
2794 }
2795
2796 \f
2797 /* Constructor/restructor/destructor procedures */
2798
2799 /* Allocate a new symtab for NAME. Needs an estimate of how many symbols
2800 MAXSYMS and linenumbers MAXLINES we'll put in it */
2801
2802 static struct symtab *
2803 new_symtab(name, maxsyms, maxlines, objfile)
2804 char *name;
2805 int maxsyms;
2806 int maxlines;
2807 struct objfile *objfile;
2808 {
2809 struct symtab *s = allocate_symtab (name, objfile);
2810
2811 LINETABLE(s) = new_linetable(maxlines);
2812
2813 /* All symtabs must have at least two blocks */
2814 BLOCKVECTOR(s) = new_bvect(2);
2815 BLOCKVECTOR_BLOCK(BLOCKVECTOR(s), GLOBAL_BLOCK) = new_block(maxsyms);
2816 BLOCKVECTOR_BLOCK(BLOCKVECTOR(s), STATIC_BLOCK) = new_block(maxsyms);
2817 BLOCK_SUPERBLOCK( BLOCKVECTOR_BLOCK(BLOCKVECTOR(s),STATIC_BLOCK)) =
2818 BLOCKVECTOR_BLOCK(BLOCKVECTOR(s), GLOBAL_BLOCK);
2819
2820 s->free_code = free_linetable;
2821
2822 return (s);
2823 }
2824
2825 /* Allocate a new partial_symtab NAME */
2826
2827 static struct partial_symtab *
2828 new_psymtab(name, objfile)
2829 char *name;
2830 struct objfile *objfile;
2831 {
2832 struct partial_symtab *psymtab;
2833
2834 /* FIXME -- why (char *) -1 rather than NULL? */
2835 psymtab = allocate_psymtab (name == (char *) -1 ? "<no name>" : name,
2836 objfile);
2837
2838 /* Keep a backpointer to the file's symbols */
2839
2840 psymtab -> read_symtab_private = (char *)
2841 obstack_alloc (&objfile->psymbol_obstack, sizeof (struct symloc));
2842 CUR_HDR(psymtab) = cur_hdr;
2843
2844 /* The way to turn this into a symtab is to call... */
2845 psymtab->read_symtab = mipscoff_psymtab_to_symtab;
2846 return (psymtab);
2847 }
2848
2849
2850 /* Allocate a linetable array of the given SIZE. Since the struct
2851 already includes one item, we subtract one when calculating the
2852 proper size to allocate. */
2853
2854 static struct linetable *
2855 new_linetable(size)
2856 int size;
2857 {
2858 struct linetable *l;
2859
2860 size = (size-1) * sizeof(l->item) + sizeof(struct linetable);
2861 l = (struct linetable *)xmalloc(size);
2862 l->nitems = 0;
2863 return l;
2864 }
2865
2866 /* Oops, too big. Shrink it. This was important with the 2.4 linetables,
2867 I am not so sure about the 3.4 ones.
2868
2869 Since the struct linetable already includes one item, we subtract one when
2870 calculating the proper size to allocate. */
2871
2872 static struct linetable *
2873 shrink_linetable(lt)
2874 struct linetable * lt;
2875 {
2876
2877 return (struct linetable *) xrealloc ((PTR)lt,
2878 sizeof(struct linetable)
2879 + (lt->nitems - 1) * sizeof(lt->item));
2880 }
2881
2882 /* Allocate and zero a new blockvector of NBLOCKS blocks. */
2883
2884 static struct blockvector *
2885 new_bvect(nblocks)
2886 int nblocks;
2887 {
2888 struct blockvector *bv;
2889 int size;
2890
2891 size = sizeof(struct blockvector) + nblocks * sizeof(struct block*);
2892 bv = (struct blockvector *) xzalloc(size);
2893
2894 BLOCKVECTOR_NBLOCKS(bv) = nblocks;
2895
2896 return bv;
2897 }
2898
2899 /* Allocate and zero a new block of MAXSYMS symbols */
2900
2901 static struct block *
2902 new_block(maxsyms)
2903 int maxsyms;
2904 {
2905 int size = sizeof(struct block) + (maxsyms-1) * sizeof(struct symbol *);
2906
2907 return (struct block *)xzalloc (size);
2908 }
2909
2910 /* Ooops, too big. Shrink block B in symtab S to its minimal size.
2911 Shrink_block can also be used by add_symbol to grow a block. */
2912
2913 static struct block *
2914 shrink_block(b, s)
2915 struct block *b;
2916 struct symtab *s;
2917 {
2918 struct block *new;
2919 struct blockvector *bv = BLOCKVECTOR(s);
2920 int i;
2921
2922 /* Just reallocate it and fix references to the old one */
2923
2924 new = (struct block *) xrealloc ((PTR)b, sizeof(struct block) +
2925 (BLOCK_NSYMS(b)-1) * sizeof(struct symbol *));
2926
2927 /* Should chase pointers to old one. Fortunately, that`s just
2928 the block`s function and inferior blocks */
2929 if (BLOCK_FUNCTION(new) && SYMBOL_BLOCK_VALUE(BLOCK_FUNCTION(new)) == b)
2930 SYMBOL_BLOCK_VALUE(BLOCK_FUNCTION(new)) = new;
2931 for (i = 0; i < BLOCKVECTOR_NBLOCKS(bv); i++)
2932 if (BLOCKVECTOR_BLOCK(bv,i) == b)
2933 BLOCKVECTOR_BLOCK(bv,i) = new;
2934 else if (BLOCK_SUPERBLOCK(BLOCKVECTOR_BLOCK(bv,i)) == b)
2935 BLOCK_SUPERBLOCK(BLOCKVECTOR_BLOCK(bv,i)) = new;
2936 return new;
2937 }
2938
2939 /* Create a new symbol with printname NAME */
2940
2941 static struct symbol *
2942 new_symbol(name)
2943 char *name;
2944 {
2945 struct symbol *s = (struct symbol *)
2946 obstack_alloc (&current_objfile->symbol_obstack, sizeof (struct symbol));
2947
2948 memset ((PTR)s, 0, sizeof (*s));
2949 SYMBOL_NAME(s) = name;
2950 return s;
2951 }
2952
2953 /* Create a new type with printname NAME */
2954
2955 static struct type *
2956 new_type(name)
2957 char *name;
2958 {
2959 struct type *t;
2960
2961 t = alloc_type (current_objfile);
2962 TYPE_NAME(t) = name;
2963 TYPE_CPLUS_SPECIFIC(t) = (struct cplus_struct_type *)
2964 &cplus_struct_default;
2965 return t;
2966 }
2967
2968 \f
2969 /* Things used for calling functions in the inferior.
2970 These functions are exported to our companion
2971 mips-tdep.c file and are here because they play
2972 with the symbol-table explicitly. */
2973
2974 /* Sigtramp: make sure we have all the necessary information
2975 about the signal trampoline code. Since the official code
2976 from MIPS does not do so, we make up that information ourselves.
2977 If they fix the library (unlikely) this code will neutralize itself. */
2978
2979 static void
2980 fixup_sigtramp()
2981 {
2982 struct symbol *s;
2983 struct symtab *st;
2984 struct block *b, *b0;
2985
2986 sigtramp_address = -1;
2987
2988 /* We know it is sold as sigvec */
2989 s = lookup_symbol("sigvec", 0, VAR_NAMESPACE, 0, NULL);
2990
2991 /* Most programs do not play with signals */
2992 if (s == 0)
2993 s = lookup_symbol("_sigtramp", 0, VAR_NAMESPACE, 0, NULL);
2994 else
2995 {
2996 b0 = SYMBOL_BLOCK_VALUE(s);
2997
2998 /* A label of sigvec, to be more precise */
2999 s = lookup_symbol("sigtramp", b0, VAR_NAMESPACE, 0, NULL);
3000 }
3001
3002 /* But maybe this program uses its own version of sigvec */
3003 if (s == 0)
3004 return;
3005
3006 /* Did we or MIPSco fix the library ? */
3007 if (SYMBOL_CLASS(s) == LOC_BLOCK)
3008 {
3009 sigtramp_address = BLOCK_START(SYMBOL_BLOCK_VALUE(s));
3010 sigtramp_end = BLOCK_END(SYMBOL_BLOCK_VALUE(s));
3011 return;
3012 }
3013
3014 sigtramp_address = SYMBOL_VALUE(s);
3015 sigtramp_end = sigtramp_address + 0x88; /* black magic */
3016
3017 /* But what symtab does it live in ? */
3018 st = find_pc_symtab(SYMBOL_VALUE(s));
3019
3020 /*
3021 * Ok, there goes the fix: turn it into a procedure, with all the
3022 * needed info. Note we make it a nested procedure of sigvec,
3023 * which is the way the (assembly) code is actually written.
3024 */
3025 SYMBOL_NAMESPACE(s) = VAR_NAMESPACE;
3026 SYMBOL_CLASS(s) = LOC_BLOCK;
3027 SYMBOL_TYPE(s) = init_type(TYPE_CODE_FUNC, 4, 0, (char *) NULL,
3028 (struct objfile *) NULL);
3029 TYPE_TARGET_TYPE(SYMBOL_TYPE(s)) = builtin_type_void;
3030
3031 /* Need a block to allocate MIPS_EFI_SYMBOL_NAME in */
3032 b = new_block(1);
3033 SYMBOL_BLOCK_VALUE(s) = b;
3034 BLOCK_START(b) = sigtramp_address;
3035 BLOCK_END(b) = sigtramp_end;
3036 BLOCK_FUNCTION(b) = s;
3037 BLOCK_SUPERBLOCK(b) = BLOCK_SUPERBLOCK(b0);
3038 add_block(b, st);
3039 sort_blocks(st);
3040
3041 /* Make a MIPS_EFI_SYMBOL_NAME entry for it */
3042 {
3043 struct mips_extra_func_info *e =
3044 (struct mips_extra_func_info *)
3045 xzalloc(sizeof(struct mips_extra_func_info));
3046
3047 e->numargs = 0; /* the kernel thinks otherwise */
3048 /* align_longword(sigcontext + SIGFRAME) */
3049 e->pdr.frameoffset = 0x150;
3050 e->pdr.framereg = SP_REGNUM;
3051 e->pdr.pcreg = 31;
3052 e->pdr.regmask = -2;
3053 e->pdr.regoffset = -(41 * sizeof(int));
3054 e->pdr.fregmask = -1;
3055 e->pdr.fregoffset = -(37 * sizeof(int));
3056 e->pdr.isym = (long)s;
3057
3058 current_objfile = st->objfile; /* Keep new_symbol happy */
3059 s = new_symbol(MIPS_EFI_SYMBOL_NAME);
3060 SYMBOL_VALUE(s) = (int) e;
3061 SYMBOL_NAMESPACE(s) = LABEL_NAMESPACE;
3062 SYMBOL_CLASS(s) = LOC_CONST;
3063 SYMBOL_TYPE(s) = builtin_type_void;
3064 current_objfile = NULL;
3065 }
3066
3067 BLOCK_SYM(b,BLOCK_NSYMS(b)++) = s;
3068 }
3069
3070
3071 /* Fake up identical offsets for all sections. */
3072
3073 struct section_offsets *
3074 mipscoff_symfile_offsets (objfile, addr)
3075 struct objfile *objfile;
3076 CORE_ADDR addr;
3077 {
3078 struct section_offsets *section_offsets;
3079 int i;
3080
3081 section_offsets = (struct section_offsets *)
3082 obstack_alloc (&objfile -> psymbol_obstack,
3083 sizeof (struct section_offsets) +
3084 sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
3085
3086 for (i = 0; i < SECT_OFF_MAX; i++)
3087 ANOFFSET (section_offsets, i) = addr;
3088
3089 return section_offsets;
3090 }
3091 \f
3092 /* Initialization */
3093
3094 static struct sym_fns ecoff_sym_fns =
3095 {
3096 "ecoff", /* sym_name: name or name prefix of BFD target type */
3097 5, /* sym_namelen: number of significant sym_name chars */
3098 mipscoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
3099 mipscoff_symfile_init,/* sym_init: read initial info, setup for sym_read() */
3100 mipscoff_symfile_read,/* sym_read: read a symbol file into symtab */
3101 mipscoff_symfile_finish,/* sym_finish: finished with file, cleanup */
3102 mipscoff_symfile_offsets,/* sym_offsets: dummy FIXME til implem sym reloc */
3103 NULL /* next: pointer to next struct sym_fns */
3104 };
3105
3106
3107 void
3108 _initialize_mipsread ()
3109 {
3110 add_symtab_fns (&ecoff_sym_fns);
3111
3112 /* Missing basic types */
3113
3114 builtin_type_string =
3115 init_type(TYPE_CODE_STRING,
3116 TARGET_CHAR_BIT / TARGET_CHAR_BIT,
3117 0, "string",
3118 (struct objfile *) NULL);
3119 builtin_type_complex =
3120 init_type(TYPE_CODE_FLT,
3121 TARGET_COMPLEX_BIT / TARGET_CHAR_BIT,
3122 0, "complex",
3123 (struct objfile *) NULL);
3124 builtin_type_double_complex =
3125 init_type(TYPE_CODE_FLT,
3126 TARGET_DOUBLE_COMPLEX_BIT / TARGET_CHAR_BIT,
3127 0, "double complex",
3128 (struct objfile *) NULL);
3129 builtin_type_fixed_dec =
3130 init_type(TYPE_CODE_INT,
3131 TARGET_INT_BIT / TARGET_CHAR_BIT,
3132 0, "fixed decimal",
3133 (struct objfile *) NULL);
3134 builtin_type_float_dec =
3135 init_type(TYPE_CODE_FLT,
3136 TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
3137 0, "floating decimal",
3138 (struct objfile *) NULL);
3139 }
This page took 0.09612 seconds and 4 git commands to generate.