1 /* Definitions for remote debugging interface for ROM monitors.
2 Copyright 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2000
3 Free Software Foundation, Inc.
4 Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA.
27 struct target_waitstatus
;
30 /* This structure describes the strings necessary to give small command
31 sequences to the monitor, and parse the response.
33 CMD is the actual command typed at the monitor. Usually this has
34 embedded sequences ala printf, which are substituted with the
35 arguments appropriate to that type of command. Ie: to examine a
36 register, we substitute the register name for the first arg. To
37 modify memory, we substitute the memory location and the new
38 contents for the first and second args, etc...
40 RESP_DELIM used to home in on the response string, and is used to
41 disambiguate the answer within the pile of text returned by the
42 monitor. This should be a unique string that immediately precedes
43 the answer. Ie: if your monitor prints out `PC: 00000001= ' in
44 response to asking for the PC, you should use `: ' as the
45 RESP_DELIM. RESP_DELIM may be NULL if the res- ponse is going to
46 be ignored, or has no particular leading text.
48 TERM is the string that the monitor outputs to indicate that it is
49 idle, and waiting for input. This is usually a prompt of some
50 sort. In the previous example, it would be `= '. It is important
51 that TERM really means that the monitor is idle, otherwise GDB may
52 try to type at it when it isn't ready for input. This is a problem
53 because many monitors cannot deal with type-ahead. TERM may be
54 NULL if the normal prompt is output.
56 TERM_CMD is used to quit out of the subcommand mode and get back to
57 the main prompt. TERM_CMD may be NULL if it isn't necessary. It
58 will also be ignored if TERM is NULL. */
62 char *cmdb
; /* Command to send for byte read/write */
63 char *cmdw
; /* Command for word (16 bit) read/write */
64 char *cmdl
; /* Command for long (32 bit) read/write */
65 char *cmdll
; /* Command for long long (64 bit) read/write */
66 char *resp_delim
; /* String just prior to the desired value */
67 char *term
; /* Terminating string to search for */
68 char *term_cmd
; /* String to get out of sub-mode (if necessary) */
73 char *cmd
; /* Command to send for reg read/write */
74 char *resp_delim
; /* String (actually a regexp if getmem) just
75 prior to the desired value */
76 char *term
; /* Terminating string to search for */
77 char *term_cmd
; /* String to get out of sub-mode (if necessary) */
82 int flags
; /* See below */
83 char **init
; /* List of init commands. NULL terminated. */
84 char *cont
; /* continue command */
85 char *step
; /* single step */
86 char *stop
; /* Interrupt program string */
87 char *set_break
; /* set a breakpoint. If NULL, monitor implementation
88 sets its own to_insert_breakpoint method. */
89 char *clr_break
; /* clear a breakpoint */
90 char *clr_all_break
; /* Clear all breakpoints */
91 char *fill
; /* Memory fill cmd (addr len val) */
92 struct memrw_cmd setmem
; /* set memory to a value */
93 struct memrw_cmd getmem
; /* display memory */
94 struct regrw_cmd setreg
; /* set a register */
95 struct regrw_cmd getreg
; /* get a register */
96 /* Some commands can dump a bunch of registers
97 at once. This comes as a set of REG=VAL
98 pairs. This should be called for each pair
99 of registers that we can parse to supply
100 GDB with the value of a register. */
101 char *dump_registers
; /* Command to dump all regs at once */
102 char *register_pattern
; /* Pattern that picks out register from reg dump */
103 void (*supply_register
) (char *name
, int namelen
, char *val
, int vallen
);
104 void (*load_routine
) (struct serial
*desc
, char *file
,
105 int hashmark
); /* Download routine */
106 int (*dumpregs
) (void); /* routine to dump all registers */
107 int (*continue_hook
) (void); /* Emit the continue command */
108 int (*wait_filter
) (char *buf
, /* Maybe contains registers */
110 int *response_length
,
111 struct target_waitstatus
* status
);
112 char *load
; /* load command */
113 char *loadresp
; /* Response to load command */
114 char *prompt
; /* monitor command prompt */
115 char *line_term
; /* end-of-command delimitor */
116 char *cmd_end
; /* optional command terminator */
117 struct target_ops
*target
; /* target operations */
118 int stopbits
; /* number of stop bits */
119 char **regnames
; /* array of register names in ascii */
120 /* deprecated: use regname instead */
121 const char *(*regname
) (int index
);
122 /* function for dynamic regname array */
123 int num_breakpoints
; /* If set_break != NULL, number of supported
125 int magic
; /* Check value */
128 /* The monitor ops magic number, used to detect if an ops structure doesn't
129 have the right number of entries filled in. */
131 #define MONITOR_OPS_MAGIC 600925
133 /* Flag definitions. */
135 /* If set, then clear breakpoint command uses address, otherwise it
136 uses an index returned by the monitor. */
138 #define MO_CLR_BREAK_USES_ADDR 0x1
140 /* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
141 as args, else it uses STARTADDR, LENGTH, VALUE as args. */
143 #define MO_FILL_USES_ADDR 0x2
145 /* If set, then monitor doesn't automatically supply register dump
146 when coming back after a continue. */
148 #define MO_NEED_REGDUMP_AFTER_CONT 0x4
150 /* getmem needs start addr and end addr */
152 #define MO_GETMEM_NEEDS_RANGE 0x8
154 /* getmem can only read one loc at a time */
156 #define MO_GETMEM_READ_SINGLE 0x10
158 /* handle \r\n combinations */
160 #define MO_HANDLE_NL 0x20
162 /* don't expect echos in monitor_open */
164 #define MO_NO_ECHO_ON_OPEN 0x40
166 /* If set, send break to stop monitor */
168 #define MO_SEND_BREAK_ON_STOP 0x80
170 /* If set, target sends an ACK after each S-record */
172 #define MO_SREC_ACK 0x100
174 /* Allow 0x prefix on addresses retured from monitor */
176 #define MO_HEX_PREFIX 0x200
178 /* Some monitors require a different command when starting a program */
180 #define MO_RUN_FIRST_TIME 0x400
182 /* Don't expect echos when getting memory */
184 #define MO_NO_ECHO_ON_SETMEM 0x800
186 /* If set, then register store command expects value BEFORE regname */
188 #define MO_REGISTER_VALUE_FIRST 0x1000
190 /* If set, then the monitor displays registers as pairs. */
192 #define MO_32_REGS_PAIRED 0x2000
194 /* If set, then register setting happens interactively. */
196 #define MO_SETREG_INTERACTIVE 0x4000
198 /* If set, then memory setting happens interactively. */
200 #define MO_SETMEM_INTERACTIVE 0x8000
202 /* If set, then memory dumps are always on 16-byte boundaries, even
203 when less is desired. */
205 #define MO_GETMEM_16_BOUNDARY 0x10000
207 /* If set, then the monitor numbers its breakpoints starting from 1. */
209 #define MO_CLR_BREAK_1_BASED 0x20000
211 /* If set, then the monitor acks srecords with a plus sign. */
213 #define MO_SREC_ACK_PLUS 0x40000
215 /* If set, then the monitor "acks" srecords with rotating lines. */
217 #define MO_SREC_ACK_ROTATE 0x80000
219 /* If set, then remove useless address bits from memory addresses. */
221 #define MO_ADDR_BITS_REMOVE 0x100000
223 /* If set, then display target program output if prefixed by ^O. */
225 #define MO_PRINT_PROGRAM_OUTPUT 0x200000
227 /* Some dump bytes commands align the first data with the preceeding
228 16 byte boundary. Some print blanks and start at the exactly the
229 requested boundary. */
231 #define MO_EXACT_DUMPADDR 0x400000
233 /* Rather entering and exiting the write memory dialog for each word byte,
234 we can save time by transferring the whole block without exiting
235 the memory editing mode. You only need to worry about this
236 if you are doing memory downloading.
237 This engages a new write function registered with dcache.
239 #define MO_HAS_BLOCKWRITES 0x800000
241 #define SREC_SIZE 160
243 extern void monitor_open (char *args
, struct monitor_ops
*ops
, int from_tty
);
244 extern void monitor_close (int quitting
);
245 extern char *monitor_supply_register (int regno
, char *valstr
);
246 extern int monitor_expect (char *prompt
, char *buf
, int buflen
);
247 extern int monitor_expect_prompt (char *buf
, int buflen
);
248 /* Note: The variable argument functions monitor_printf and
249 monitor_printf_noecho vararg do not take take standard format style
250 arguments. Instead they take custom formats interpretered directly
251 by monitor_vsprintf. */
252 extern void monitor_printf (char *, ...);
253 extern void monitor_printf_noecho (char *, ...);
254 extern void monitor_write (char *buf
, int buflen
);
255 extern int monitor_readchar (void);
256 extern char *monitor_get_dev_name (void);
257 extern void init_monitor_ops (struct target_ops
*);
258 extern int monitor_dump_reg_block (char *dump_cmd
);
This page took 0.033867 seconds and 4 git commands to generate.