gdb/ppc64-tdep.c

   1 /* Common target-dependent code for ppc64 GDB, the GNU debugger.
   2
   3    Copyright (C) 1986-2020 Free Software Foundation, Inc.
   4
   5    This file is part of GDB.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  19
  20 #include "defs.h"
  21 #include "frame.h"
  22 #include "gdbcore.h"
  23 #include "infrun.h"
  24 #include "ppc-tdep.h"
  25 #include "ppc64-tdep.h"
  26 #include "elf-bfd.h"
  27
  28 /* Macros for matching instructions.  Note that, since all the
  29    operands are masked off before they're or-ed into the instruction,
  30    you can use -1 to make masks.  */
  31
  32 #define insn_d(opcd, rts, ra, d)                \
  33   ((((unsigned (opcd)) & 0x3f) << 26)           \
  34    | (((unsigned (rts)) & 0x1f) << 21)          \
  35    | (((unsigned (ra)) & 0x1f) << 16)           \
  36    | ((unsigned (d)) & 0xffff))
  37
  38 #define insn_ds(opcd, rts, ra, d, xo)           \
  39   ((((unsigned (opcd)) & 0x3f) << 26)                      \
  40    | (((unsigned (rts)) & 0x1f) << 21)                     \
  41    | (((unsigned (ra)) & 0x1f) << 16)                      \
  42    | ((unsigned (d)) & 0xfffc)                             \
  43    | ((unsigned (xo)) & 0x3))
  44
  45 #define insn_xfx(opcd, rts, spr, xo)            \
  46   ((((unsigned (opcd)) & 0x3f) << 26)                      \
  47    | (((unsigned (rts)) & 0x1f) << 21)                     \
  48    | (((unsigned (spr)) & 0x1f) << 16)                     \
  49    | (((unsigned (spr)) & 0x3e0) << 6)                     \
  50    | (((unsigned (xo)) & 0x3ff) << 1))
  51
  52 /* PLT_OFF is the TOC-relative offset of a 64-bit PowerPC PLT entry.
  53    Return the function's entry point.  */
  54
  55 static CORE_ADDR
  56 ppc64_plt_entry_point (struct frame_info *frame, CORE_ADDR plt_off)
  57 {
  58   struct gdbarch *gdbarch = get_frame_arch (frame);
  59   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
  60   struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
  61   CORE_ADDR tocp;
  62
  63   if (execution_direction == EXEC_REVERSE)
  64     {
  65       /* If executing in reverse, r2 will have been stored to the stack.  */
  66       CORE_ADDR sp = get_frame_register_unsigned (frame,
  67                                                   tdep->ppc_gp0_regnum + 1);
  68       unsigned int sp_off = tdep->elf_abi == POWERPC_ELF_V1 ? 40 : 24;
  69       tocp = read_memory_unsigned_integer (sp + sp_off, 8, byte_order);
  70     }
  71   else
  72     tocp = get_frame_register_unsigned (frame, tdep->ppc_gp0_regnum + 2);
  73
  74   /* The first word of the PLT entry is the function entry point.  */
  75   return read_memory_unsigned_integer (tocp + plt_off, 8, byte_order);
  76 }
  77
  78 /* Patterns for the standard linkage functions.  These are built by
  79    build_plt_stub in bfd/elf64-ppc.c.  */
  80
  81 /* Old ELFv1 PLT call stub.  */
  82
  83 static const struct ppc_insn_pattern ppc64_standard_linkage1[] =
  84   {
  85     /* addis r12, r2, <any> */
  86     { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 },
  87
  88     /* std r2, 40(r1) */
  89     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 0 },
  90
  91     /* ld r11, <any>(r12) */
  92     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 },
  93
  94     /* addis r12, r12, 1 <optional> */
  95     { insn_d (-1, -1, -1, -1), insn_d (15, 12, 12, 1), 1 },
  96
  97     /* ld r2, <any>(r12) */
  98     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 12, 0, 0), 0 },
  99
 100     /* addis r12, r12, 1 <optional> */
 101     { insn_d (-1, -1, -1, -1), insn_d (15, 12, 12, 1), 1 },
 102
 103     /* mtctr r11 */
 104     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 },
 105
 106     /* ld r11, <any>(r12) <optional> */
 107     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 1 },
 108
 109     /* bctr */
 110     { (unsigned) -1, 0x4e800420, 0 },
 111
 112     { 0, 0, 0 }
 113   };
 114
 115 /* ELFv1 PLT call stub to access PLT entries more than +/- 32k from r2.
 116    Also supports older stub with different placement of std 2,40(1),
 117    a stub that omits the std 2,40(1), and both versions of power7
 118    thread safety read barriers.  Note that there are actually two more
 119    instructions following "cmpldi r2, 0", "bnectr+" and "b <glink_i>",
 120    but there isn't any need to match them.  */
 121
 122 static const struct ppc_insn_pattern ppc64_standard_linkage2[] =
 123   {
 124     /* std r2, 40(r1) <optional> */
 125     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 1 },
 126
 127     /* addis r12, r2, <any> */
 128     { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 },
 129
 130     /* std r2, 40(r1) <optional> */
 131     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 1 },
 132
 133     /* ld r11, <any>(r12) */
 134     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 0 },
 135
 136     /* addi r12, r12, <any> <optional> */
 137     { insn_d (-1, -1, -1, 0), insn_d (14, 12, 12, 0), 1 },
 138
 139     /* mtctr r11 */
 140     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 },
 141
 142     /* xor r11, r11, r11 <optional> */
 143     { (unsigned) -1, 0x7d6b5a78, 1 },
 144
 145     /* add r12, r12, r11 <optional> */
 146     { (unsigned) -1, 0x7d8c5a14, 1 },
 147
 148     /* ld r2, <any>(r12) */
 149     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 12, 0, 0), 0 },
 150
 151     /* ld r11, <any>(r12) <optional> */
 152     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 12, 0, 0), 1 },
 153
 154     /* bctr <optional> */
 155     { (unsigned) -1, 0x4e800420, 1 },
 156
 157     /* cmpldi r2, 0 <optional> */
 158     { (unsigned) -1, 0x28220000, 1 },
 159
 160     { 0, 0, 0 }
 161   };
 162
 163 /* ELFv1 PLT call stub to access PLT entries within +/- 32k of r2.  */
 164
 165 static const struct ppc_insn_pattern ppc64_standard_linkage3[] =
 166   {
 167     /* std r2, 40(r1) <optional> */
 168     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 1 },
 169
 170     /* ld r11, <any>(r2) */
 171     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 2, 0, 0), 0 },
 172
 173     /* addi r2, r2, <any> <optional> */
 174     { insn_d (-1, -1, -1, 0), insn_d (14, 2, 2, 0), 1 },
 175
 176     /* mtctr r11 */
 177     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 11, 9, 467), 0 },
 178
 179     /* xor r11, r11, r11 <optional> */
 180     { (unsigned) -1, 0x7d6b5a78, 1 },
 181
 182     /* add r2, r2, r11 <optional> */
 183     { (unsigned) -1, 0x7c425a14, 1 },
 184
 185     /* ld r11, <any>(r2) <optional> */
 186     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 2, 0, 0), 1 },
 187
 188     /* ld r2, <any>(r2) */
 189     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 2, 0, 0), 0 },
 190
 191     /* bctr <optional> */
 192     { (unsigned) -1, 0x4e800420, 1 },
 193
 194     /* cmpldi r2, 0 <optional> */
 195     { (unsigned) -1, 0x28220000, 1 },
 196
 197     { 0, 0, 0 }
 198   };
 199
 200 /* ELFv1 PLT call stub to access PLT entries more than +/- 32k from r2.
 201    A more modern variant of ppc64_standard_linkage2 differing in
 202    register usage.  */
 203
 204 static const struct ppc_insn_pattern ppc64_standard_linkage4[] =
 205   {
 206     /* std r2, 40(r1) <optional> */
 207     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 1 },
 208
 209     /* addis r11, r2, <any> */
 210     { insn_d (-1, -1, -1, 0), insn_d (15, 11, 2, 0), 0 },
 211
 212     /* ld r12, <any>(r11) */
 213     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 12, 11, 0, 0), 0 },
 214
 215     /* addi r11, r11, <any> <optional> */
 216     { insn_d (-1, -1, -1, 0), insn_d (14, 11, 11, 0), 1 },
 217
 218     /* mtctr r12 */
 219     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 12, 9, 467), 0 },
 220
 221     /* xor r2, r12, r12 <optional> */
 222     { (unsigned) -1, 0x7d826278, 1 },
 223
 224     /* add r11, r11, r2 <optional> */
 225     { (unsigned) -1, 0x7d6b1214, 1 },
 226
 227     /* ld r2, <any>(r11) */
 228     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 11, 0, 0), 0 },
 229
 230     /* ld r11, <any>(r11) <optional> */
 231     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 11, 0, 0), 1 },
 232
 233     /* bctr <optional> */
 234     { (unsigned) -1, 0x4e800420, 1 },
 235
 236     /* cmpldi r2, 0 <optional> */
 237     { (unsigned) -1, 0x28220000, 1 },
 238
 239     { 0, 0, 0 }
 240   };
 241
 242 /* ELFv1 PLT call stub to access PLT entries within +/- 32k of r2.
 243    A more modern variant of ppc64_standard_linkage3 differing in
 244    register usage.  */
 245
 246 static const struct ppc_insn_pattern ppc64_standard_linkage5[] =
 247   {
 248     /* std r2, 40(r1) <optional> */
 249     { (unsigned) -1, insn_ds (62, 2, 1, 40, 0), 1 },
 250
 251     /* ld r12, <any>(r2) */
 252     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 12, 2, 0, 0), 0 },
 253
 254     /* addi r2, r2, <any> <optional> */
 255     { insn_d (-1, -1, -1, 0), insn_d (14, 2, 2, 0), 1 },
 256
 257     /* mtctr r12 */
 258     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 12, 9, 467), 0 },
 259
 260     /* xor r11, r12, r12 <optional> */
 261     { (unsigned) -1, 0x7d8b6278, 1 },
 262
 263     /* add r2, r2, r11 <optional> */
 264     { (unsigned) -1, 0x7c425a14, 1 },
 265
 266     /* ld r11, <any>(r2) <optional> */
 267     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 11, 2, 0, 0), 1 },
 268
 269     /* ld r2, <any>(r2) */
 270     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 2, 2, 0, 0), 0 },
 271
 272     /* bctr <optional> */
 273     { (unsigned) -1, 0x4e800420, 1 },
 274
 275     /* cmpldi r2, 0 <optional> */
 276     { (unsigned) -1, 0x28220000, 1 },
 277
 278     { 0, 0, 0 }
 279   };
 280
 281 /* ELFv2 PLT call stub to access PLT entries more than +/- 32k from r2.  */
 282
 283 static const struct ppc_insn_pattern ppc64_standard_linkage6[] =
 284   {
 285     /* std r2, 24(r1) <optional> */
 286     { (unsigned) -1, insn_ds (62, 2, 1, 24, 0), 1 },
 287
 288     /* addis r11, r2, <any> */
 289     { insn_d (-1, -1, -1, 0), insn_d (15, 11, 2, 0), 0 },
 290
 291     /* ld r12, <any>(r11) */
 292     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 12, 11, 0, 0), 0 },
 293
 294     /* mtctr r12 */
 295     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 12, 9, 467), 0 },
 296
 297     /* bctr */
 298     { (unsigned) -1, 0x4e800420, 0 },
 299
 300     { 0, 0, 0 }
 301   };
 302
 303 /* ELFv2 PLT call stub to access PLT entries within +/- 32k of r2.  */
 304
 305 static const struct ppc_insn_pattern ppc64_standard_linkage7[] =
 306   {
 307     /* std r2, 24(r1) <optional> */
 308     { (unsigned) -1, insn_ds (62, 2, 1, 24, 0), 1 },
 309
 310     /* ld r12, <any>(r2) */
 311     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 12, 2, 0, 0), 0 },
 312
 313     /* mtctr r12 */
 314     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 12, 9, 467), 0 },
 315
 316     /* bctr */
 317     { (unsigned) -1, 0x4e800420, 0 },
 318
 319     { 0, 0, 0 }
 320   };
 321
 322 /* ELFv2 PLT call stub to access PLT entries more than +/- 32k from r2,
 323    supporting fusion.  */
 324
 325 static const struct ppc_insn_pattern ppc64_standard_linkage8[] =
 326   {
 327     /* std r2, 24(r1) <optional> */
 328     { (unsigned) -1, insn_ds (62, 2, 1, 24, 0), 1 },
 329
 330     /* addis r12, r2, <any> */
 331     { insn_d (-1, -1, -1, 0), insn_d (15, 12, 2, 0), 0 },
 332
 333     /* ld r12, <any>(r12) */
 334     { insn_ds (-1, -1, -1, 0, -1), insn_ds (58, 12, 12, 0, 0), 0 },
 335
 336     /* mtctr r12 */
 337     { insn_xfx (-1, -1, -1, -1), insn_xfx (31, 12, 9, 467), 0 },
 338
 339     /* bctr */
 340     { (unsigned) -1, 0x4e800420, 0 },
 341
 342     { 0, 0, 0 }
 343   };
 344
 345 /* When the dynamic linker is doing lazy symbol resolution, the first
 346    call to a function in another object will go like this:
 347
 348    - The user's function calls the linkage function:
 349
 350         100003d4:   4b ff ff ad     bl      10000380 <nnnn.plt_call.printf>
 351         100003d8:   e8 41 00 28     ld      r2,40(r1)
 352
 353    - The linkage function loads the entry point and toc pointer from
 354      the function descriptor in the PLT, and jumps to it:
 355
 356      <nnnn.plt_call.printf>:
 357         10000380:   f8 41 00 28     std     r2,40(r1)
 358         10000384:   e9 62 80 78     ld      r11,-32648(r2)
 359         10000388:   7d 69 03 a6     mtctr   r11
 360         1000038c:   e8 42 80 80     ld      r2,-32640(r2)
 361         10000390:   28 22 00 00     cmpldi  r2,0
 362         10000394:   4c e2 04 20     bnectr+
 363         10000398:   48 00 03 a0     b       10000738 <printf@plt>
 364
 365    - But since this is the first time that PLT entry has been used, it
 366      sends control to its glink entry.  That loads the number of the
 367      PLT entry and jumps to the common glink0 code:
 368
 369      <printf@plt>:
 370         10000738:   38 00 00 01     li      r0,1
 371         1000073c:   4b ff ff bc     b       100006f8 <__glink_PLTresolve>
 372
 373    - The common glink0 code then transfers control to the dynamic
 374      linker's fixup code:
 375
 376         100006f0:   0000000000010440 .quad plt0 - (. + 16)
 377      <__glink_PLTresolve>:
 378         100006f8:   7d 88 02 a6     mflr    r12
 379         100006fc:   42 9f 00 05     bcl     20,4*cr7+so,10000700
 380         10000700:   7d 68 02 a6     mflr    r11
 381         10000704:   e8 4b ff f0     ld      r2,-16(r11)
 382         10000708:   7d 88 03 a6     mtlr    r12
 383         1000070c:   7d 82 5a 14     add     r12,r2,r11
 384         10000710:   e9 6c 00 00     ld      r11,0(r12)
 385         10000714:   e8 4c 00 08     ld      r2,8(r12)
 386         10000718:   7d 69 03 a6     mtctr   r11
 387         1000071c:   e9 6c 00 10     ld      r11,16(r12)
 388         10000720:   4e 80 04 20     bctr
 389
 390    Eventually, this code will figure out how to skip all of this,
 391    including the dynamic linker.  At the moment, we just get through
 392    the linkage function.  */
 393
 394 /* If the current thread is about to execute a series of instructions
 395    matching the ppc64_standard_linkage pattern, and INSN is the result
 396    from that pattern match, return the code address to which the
 397    standard linkage function will send them.  (This doesn't deal with
 398    dynamic linker lazy symbol resolution stubs.)  */
 399
 400 static CORE_ADDR
 401 ppc64_standard_linkage1_target (struct frame_info *frame, unsigned int *insn)
 402 {
 403   CORE_ADDR plt_off = ((ppc_insn_d_field (insn[0]) << 16)
 404                        + ppc_insn_ds_field (insn[2]));
 405
 406   return ppc64_plt_entry_point (frame, plt_off);
 407 }
 408
 409 static CORE_ADDR
 410 ppc64_standard_linkage2_target (struct frame_info *frame, unsigned int *insn)
 411 {
 412   CORE_ADDR plt_off = ((ppc_insn_d_field (insn[1]) << 16)
 413                        + ppc_insn_ds_field (insn[3]));
 414
 415   return ppc64_plt_entry_point (frame, plt_off);
 416 }
 417
 418 static CORE_ADDR
 419 ppc64_standard_linkage3_target (struct frame_info *frame, unsigned int *insn)
 420 {
 421   CORE_ADDR plt_off = ppc_insn_ds_field (insn[1]);
 422
 423   return ppc64_plt_entry_point (frame, plt_off);
 424 }
 425
 426 static CORE_ADDR
 427 ppc64_standard_linkage4_target (struct frame_info *frame, unsigned int *insn)
 428 {
 429   CORE_ADDR plt_off = ((ppc_insn_d_field (insn[1]) << 16)
 430                        + ppc_insn_ds_field (insn[2]));
 431
 432   return ppc64_plt_entry_point (frame, plt_off);
 433 }
 434
 435
 436 /* Given that we've begun executing a call trampoline at PC, return
 437    the entry point of the function the trampoline will go to.
 438
 439    When the execution direction is EXEC_REVERSE, scan backward to
 440    check whether we are in the middle of a PLT stub.  */
 441
 442 static CORE_ADDR
 443 ppc64_skip_trampoline_code_1 (struct frame_info *frame, CORE_ADDR pc)
 444 {
 445 #define MAX(a,b) ((a) > (b) ? (a) : (b))
 446   unsigned int insns[MAX (MAX (MAX (ARRAY_SIZE (ppc64_standard_linkage1),
 447                                     ARRAY_SIZE (ppc64_standard_linkage2)),
 448                                MAX (ARRAY_SIZE (ppc64_standard_linkage3),
 449                                     ARRAY_SIZE (ppc64_standard_linkage4))),
 450                           MAX (MAX (ARRAY_SIZE (ppc64_standard_linkage5),
 451                                     ARRAY_SIZE (ppc64_standard_linkage6)),
 452                                MAX (ARRAY_SIZE (ppc64_standard_linkage7),
 453                                     ARRAY_SIZE (ppc64_standard_linkage8))))
 454                      - 1];
 455   CORE_ADDR target;
 456   int scan_limit, i;
 457
 458   scan_limit = 1;
 459   /* When reverse-debugging, scan backward to check whether we are
 460      in the middle of trampoline code.  */
 461   if (execution_direction == EXEC_REVERSE)
 462     scan_limit = ARRAY_SIZE (insns) - 1;
 463
 464   for (i = 0; i < scan_limit; i++)
 465     {
 466       if (i < ARRAY_SIZE (ppc64_standard_linkage8) - 1
 467           && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage8, insns))
 468         pc = ppc64_standard_linkage4_target (frame, insns);
 469       else if (i < ARRAY_SIZE (ppc64_standard_linkage7) - 1
 470                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage7,
 471                                            insns))
 472         pc = ppc64_standard_linkage3_target (frame, insns);
 473       else if (i < ARRAY_SIZE (ppc64_standard_linkage6) - 1
 474                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage6,
 475                                            insns))
 476         pc = ppc64_standard_linkage4_target (frame, insns);
 477       else if (i < ARRAY_SIZE (ppc64_standard_linkage5) - 1
 478                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage5,
 479                                            insns)
 480                && (insns[8] != 0 || insns[9] != 0))
 481         pc = ppc64_standard_linkage3_target (frame, insns);
 482       else if (i < ARRAY_SIZE (ppc64_standard_linkage4) - 1
 483                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage4,
 484                                            insns)
 485                && (insns[9] != 0 || insns[10] != 0))
 486         pc = ppc64_standard_linkage4_target (frame, insns);
 487       else if (i < ARRAY_SIZE (ppc64_standard_linkage3) - 1
 488                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage3,
 489                                            insns)
 490                && (insns[8] != 0 || insns[9] != 0))
 491         pc = ppc64_standard_linkage3_target (frame, insns);
 492       else if (i < ARRAY_SIZE (ppc64_standard_linkage2) - 1
 493                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage2,
 494                                            insns)
 495                && (insns[10] != 0 || insns[11] != 0))
 496         pc = ppc64_standard_linkage2_target (frame, insns);
 497       else if (i < ARRAY_SIZE (ppc64_standard_linkage1) - 1
 498                && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage1,
 499                                            insns))
 500         pc = ppc64_standard_linkage1_target (frame, insns);
 501       else
 502         {
 503           /* Scan backward one more instructions if doesn't match.  */
 504           pc -= 4;
 505           continue;
 506         }
 507
 508       /* The PLT descriptor will either point to the already resolved target
 509          address, or else to a glink stub.  As the latter carry synthetic @plt
 510          symbols, find_solib_trampoline_target should be able to resolve them.  */
 511       target = find_solib_trampoline_target (frame, pc);
 512       return target ? target : pc;
 513   }
 514
 515   return 0;
 516 }
 517
 518 /* Wrapper of ppc64_skip_trampoline_code_1 checking also
 519    ppc_elfv2_skip_entrypoint.  */
 520
 521 CORE_ADDR
 522 ppc64_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
 523 {
 524   struct gdbarch *gdbarch = get_frame_arch (frame);
 525
 526   pc = ppc64_skip_trampoline_code_1 (frame, pc);
 527   if (pc != 0 && gdbarch_skip_entrypoint_p (gdbarch))
 528     pc = gdbarch_skip_entrypoint (gdbarch, pc);
 529   return pc;
 530 }
 531
 532 /* Support for convert_from_func_ptr_addr (ARCH, ADDR, TARG) on PPC64
 533    GNU/Linux.
 534
 535    Usually a function pointer's representation is simply the address
 536    of the function.  On GNU/Linux on the PowerPC however, a function
 537    pointer may be a pointer to a function descriptor.
 538
 539    For PPC64, a function descriptor is a TOC entry, in a data section,
 540    which contains three words: the first word is the address of the
 541    function, the second word is the TOC pointer (r2), and the third word
 542    is the static chain value.
 543
 544    Throughout GDB it is currently assumed that a function pointer contains
 545    the address of the function, which is not easy to fix.  In addition, the
 546    conversion of a function address to a function pointer would
 547    require allocation of a TOC entry in the inferior's memory space,
 548    with all its drawbacks.  To be able to call C++ virtual methods in
 549    the inferior (which are called via function pointers),
 550    find_function_addr uses this function to get the function address
 551    from a function pointer.
 552
 553    If ADDR points at what is clearly a function descriptor, transform
 554    it into the address of the corresponding function, if needed.  Be
 555    conservative, otherwise GDB will do the transformation on any
 556    random addresses such as occur when there is no symbol table.  */
 557
 558 CORE_ADDR
 559 ppc64_convert_from_func_ptr_addr (struct gdbarch *gdbarch,
 560                                         CORE_ADDR addr,
 561                                         struct target_ops *targ)
 562 {
 563   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
 564   struct target_section *s = target_section_by_addr (targ, addr);
 565
 566   /* Check if ADDR points to a function descriptor.  */
 567   if (s && strcmp (s->the_bfd_section->name, ".opd") == 0)
 568     {
 569       /* There may be relocations that need to be applied to the .opd
 570          section.  Unfortunately, this function may be called at a time
 571          where these relocations have not yet been performed -- this can
 572          happen for example shortly after a library has been loaded with
 573          dlopen, but ld.so has not yet applied the relocations.
 574
 575          To cope with both the case where the relocation has been applied,
 576          and the case where it has not yet been applied, we do *not* read
 577          the (maybe) relocated value from target memory, but we instead
 578          read the non-relocated value from the BFD, and apply the relocation
 579          offset manually.
 580
 581          This makes the assumption that all .opd entries are always relocated
 582          by the same offset the section itself was relocated.  This should
 583          always be the case for GNU/Linux executables and shared libraries.
 584          Note that other kind of object files (e.g. those added via
 585          add-symbol-files) will currently never end up here anyway, as this
 586          function accesses *target* sections only; only the main exec and
 587          shared libraries are ever added to the target.  */
 588
 589       gdb_byte buf[8];
 590       int res;
 591
 592       res = bfd_get_section_contents (s->the_bfd_section->owner,
 593                                       s->the_bfd_section,
 594                                       &buf, addr - s->addr, 8);
 595       if (res != 0)
 596         return (extract_unsigned_integer (buf, 8, byte_order)
 597                 - bfd_section_vma (s->the_bfd_section) + s->addr);
 598    }
 599
 600   return addr;
 601 }
 602
 603 /* A synthetic 'dot' symbols on ppc64 has the udata.p entry pointing
 604    back to the original ELF symbol it was derived from.  Get the size
 605    from that symbol.  */
 606
 607 void
 608 ppc64_elf_make_msymbol_special (asymbol *sym, struct minimal_symbol *msym)
 609 {
 610   if ((sym->flags & BSF_SYNTHETIC) != 0 && sym->udata.p != NULL)
 611     {
 612       elf_symbol_type *elf_sym = (elf_symbol_type *) sym->udata.p;
 613       SET_MSYMBOL_SIZE (msym, elf_sym->internal_elf_sym.st_size);
 614     }
 615 }