1 /* Remote debugging interface for MIPS remote debugging protocol.
2 Copyright 1993 Free Software Foundation, Inc.
3 Contributed by Cygnus Support. Written by Ian Lance Taylor
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
31 #include "remote-utils.h"
35 /* Prototypes for local functions. */
38 mips_readchar
PARAMS ((int timeout
));
41 mips_receive_header
PARAMS ((unsigned char *hdr
, int *pgarbage
, int ch
,
45 mips_receive_trailer
PARAMS ((unsigned char *trlr
, int *pgarbage
, int *pch
,
48 static int mips_cksum
PARAMS ((const unsigned char *hdr
,
49 const unsigned char *data
,
53 mips_send_packet
PARAMS ((const char *s
, int get_ack
));
56 mips_receive_packet
PARAMS ((char *buff
));
59 mips_request
PARAMS ((char cmd
, unsigned int addr
, unsigned int data
,
63 mips_initialize
PARAMS ((void));
66 mips_open
PARAMS ((char *name
, int from_tty
));
69 mips_close
PARAMS ((int quitting
));
72 mips_detach
PARAMS ((char *args
, int from_tty
));
75 mips_resume
PARAMS ((int pid
, int step
, int siggnal
));
78 mips_wait
PARAMS ((WAITTYPE
*status
));
81 mips_map_regno
PARAMS ((int regno
));
84 mips_fetch_registers
PARAMS ((int regno
));
87 mips_prepare_to_store
PARAMS ((void));
90 mips_store_registers
PARAMS ((int regno
));
93 mips_fetch_word
PARAMS ((CORE_ADDR addr
));
96 mips_store_word
PARAMS ((CORE_ADDR addr
, int value
));
99 mips_xfer_memory
PARAMS ((CORE_ADDR memaddr
, char *myaddr
, int len
,
100 int write
, struct target_ops
*ignore
));
103 mips_files_info
PARAMS ((struct target_ops
*ignore
));
106 mips_load
PARAMS ((char *args
, int from_tty
));
109 mips_create_inferior
PARAMS ((char *execfile
, char *args
, char **env
));
112 mips_mourn_inferior
PARAMS ((void));
114 /* A forward declaration. */
115 extern struct target_ops mips_ops
;
117 /* The MIPS remote debugging interface is built on top of a simple
118 packet protocol. Each packet is organized as follows:
120 SYN The first character is always a SYN (ASCII 026, or ^V). SYN
121 may not appear anywhere else in the packet. Any time a SYN is
122 seen, a new packet should be assumed to have begun.
125 This byte contains the upper five bits of the logical length
126 of the data section, plus a single bit indicating whether this
127 is a data packet or an acknowledgement. The documentation
128 indicates that this bit is 1 for a data packet, but the actual
129 board uses 1 for an acknowledgement. The value of the byte is
130 0x40 + (ack ? 0x20 : 0) + (len >> 6)
131 (we always have 0 <= len < 1024). Acknowledgement packets do
132 not carry data, and must have a data length of 0.
134 LEN1 This byte contains the lower six bits of the logical length of
135 the data section. The value is
138 SEQ This byte contains the six bit sequence number of the packet.
141 An acknowlegment packet contains the sequence number of the
142 packet being acknowledged plus 1 module 64. Data packets are
143 transmitted in sequence. There may only be one outstanding
144 unacknowledged data packet at a time. The sequence numbers
145 are independent in each direction. If an acknowledgement for
146 the previous packet is received (i.e., an acknowledgement with
147 the sequence number of the packet just sent) the packet just
148 sent should be retransmitted. If no acknowledgement is
149 received within a timeout period, the packet should be
150 retransmitted. This has an unfortunate failure condition on a
151 high-latency line, as a delayed acknowledgement may lead to an
152 endless series of duplicate packets.
154 DATA The actual data bytes follow. The following characters are
155 escaped inline with DLE (ASCII 020, or ^P):
161 The additional DLE characters are not counted in the logical
162 length stored in the TYPE_LEN and LEN1 bytes.
167 These bytes contain an 18 bit checksum of the complete
168 contents of the packet excluding the SEQ byte and the
169 CSUM[123] bytes. The checksum is simply the twos complement
170 addition of all the bytes treated as unsigned characters. The
171 values of the checksum bytes are:
172 CSUM1: 0x40 + ((cksum >> 12) & 0x3f)
173 CSUM2: 0x40 + ((cksum >> 6) & 0x3f)
174 CSUM3: 0x40 + (cksum & 0x3f)
176 It happens that the MIPS remote debugging protocol always
177 communicates with ASCII strings. Because of this, this
178 implementation doesn't bother to handle the DLE quoting mechanism,
179 since it will never be required. */
181 /* The SYN character which starts each packet. */
184 /* The 0x40 used to offset each packet (this value ensures that all of
185 the header and trailer bytes, other than SYN, are printable ASCII
187 #define HDR_OFFSET 0x40
189 /* The indices of the bytes in the packet header. */
190 #define HDR_INDX_SYN 0
191 #define HDR_INDX_TYPE_LEN 1
192 #define HDR_INDX_LEN1 2
193 #define HDR_INDX_SEQ 3
196 /* The data/ack bit in the TYPE_LEN header byte. */
197 #define TYPE_LEN_DA_BIT 0x20
198 #define TYPE_LEN_DATA 0
199 #define TYPE_LEN_ACK TYPE_LEN_DA_BIT
201 /* How to compute the header bytes. */
202 #define HDR_SET_SYN(data, len, seq) (SYN)
203 #define HDR_SET_TYPE_LEN(data, len, seq) \
205 + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \
206 + (((len) >> 6) & 0x1f))
207 #define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f))
208 #define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq))
210 /* Check that a header byte is reasonable. */
211 #define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET)
213 /* Get data from the header. These macros evaluate their argument
215 #define HDR_IS_DATA(hdr) \
216 (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA)
217 #define HDR_GET_LEN(hdr) \
218 ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f)))
219 #define HDR_GET_SEQ(hdr) ((hdr)[HDR_INDX_SEQ] & 0x3f)
221 /* The maximum data length. */
222 #define DATA_MAXLEN 1023
224 /* The trailer offset. */
225 #define TRLR_OFFSET HDR_OFFSET
227 /* The indices of the bytes in the packet trailer. */
228 #define TRLR_INDX_CSUM1 0
229 #define TRLR_INDX_CSUM2 1
230 #define TRLR_INDX_CSUM3 2
231 #define TRLR_LENGTH 3
233 /* How to compute the trailer bytes. */
234 #define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f))
235 #define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >> 6) & 0x3f))
236 #define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum) ) & 0x3f))
238 /* Check that a trailer byte is reasonable. */
239 #define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET)
241 /* Get data from the trailer. This evaluates its argument multiple
243 #define TRLR_GET_CKSUM(trlr) \
244 ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \
245 + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) << 6) \
246 + ((trlr)[TRLR_INDX_CSUM3] & 0x3f))
248 /* The sequence number modulos. */
249 #define SEQ_MODULOS (64)
251 /* Set to 1 if the target is open. */
252 static int mips_is_open
;
254 /* Set to 1 while the connection is being initialized. */
255 static int mips_initializing
;
257 /* The next sequence number to send. */
258 static int mips_send_seq
;
260 /* The next sequence number we expect to receive. */
261 static int mips_receive_seq
;
263 /* The time to wait before retransmitting a packet, in seconds. */
264 static int mips_retransmit_wait
= 3;
266 /* The number of times to try retransmitting a packet before giving up. */
267 static int mips_send_retries
= 10;
269 /* The number of garbage characters to accept when looking for an
270 SYN for the next packet. */
271 static int mips_syn_garbage
= 1050;
273 /* The time to wait for a packet, in seconds. */
274 static int mips_receive_wait
= 5;
276 /* Set if we have sent a packet to the board but have not yet received
278 static int mips_need_reply
= 0;
280 /* Handle used to access serial I/O stream. */
281 static serial_t mips_desc
;
283 /* Read a character from the remote, aborting on error. Returns
284 SERIAL_TIMEOUT on timeout (since that's what SERIAL_READCHAR
285 returns). FIXME: If we see the string "<IDT>" from the board, then
286 we are debugging on the main console port, and we have somehow
287 dropped out of remote debugging mode. In this case, we
288 automatically go back in to remote debugging mode. This is a hack,
289 put in because I can't find any way for a program running on the
290 remote board to terminate without also ending remote debugging
291 mode. I assume users won't have any trouble with this; for one
292 thing, the IDT documentation generally assumes that the remote
293 debugging port is not the console port. This is, however, very
294 convenient for DejaGnu when you only have one connected serial
298 mips_readchar (timeout
)
302 static int state
= 0;
303 static char nextstate
[5] = { '<', 'I', 'D', 'T', '>' };
305 ch
= SERIAL_READCHAR (mips_desc
, timeout
);
306 if (ch
== SERIAL_EOF
)
307 error ("End of file from remote");
308 if (ch
== SERIAL_ERROR
)
309 error ("Error reading from remote: %s", safe_strerror (errno
));
310 if (sr_get_debug () > 1)
312 if (ch
!= SERIAL_TIMEOUT
)
313 printf_filtered ("Read '%c' %d 0x%x\n", ch
, ch
, ch
);
315 printf_filtered ("Timed out in read\n");
318 /* If we have seen <IDT> and we either time out, or we see a @
319 (which was echoed from a packet we sent), reset the board as
320 described above. The first character in a packet after the SYN
321 (which is not echoed) is always an @ unless the packet is more
322 than 64 characters long, which ours never are. */
323 if ((ch
== SERIAL_TIMEOUT
|| ch
== '@')
325 && ! mips_initializing
)
327 if (sr_get_debug () > 0)
328 printf_filtered ("Reinitializing MIPS debugging mode\n");
329 SERIAL_WRITE (mips_desc
, "\rdb tty0\r", sizeof "\rdb tty0\r" - 1);
337 error ("Remote board reset");
340 if (ch
== nextstate
[state
])
348 /* Get a packet header, putting the data in the supplied buffer.
349 PGARBAGE is a pointer to the number of garbage characters received
350 so far. CH is the last character received. Returns 0 for success,
351 or -1 for timeout. */
354 mips_receive_header (hdr
, pgarbage
, ch
, timeout
)
364 /* Wait for a SYN. mips_syn_garbage is intended to prevent
365 sitting here indefinitely if the board sends us one garbage
366 character per second. ch may already have a value from the
367 last time through the loop. */
370 ch
= mips_readchar (timeout
);
371 if (ch
== SERIAL_TIMEOUT
)
375 /* Printing the character here lets the user of gdb see
376 what the program is outputting, if the debugging is
377 being done on the console port. FIXME: Perhaps this
378 should be filtered? */
379 if (! mips_initializing
|| sr_get_debug () > 0)
386 if (*pgarbage
> mips_syn_garbage
)
387 error ("Remote debugging protocol failure");
391 /* Get the packet header following the SYN. */
392 for (i
= 1; i
< HDR_LENGTH
; i
++)
394 ch
= mips_readchar (timeout
);
395 if (ch
== SERIAL_TIMEOUT
)
398 /* Make sure this is a header byte. */
399 if (ch
== SYN
|| ! HDR_CHECK (ch
))
405 /* If we got the complete header, we can return. Otherwise we
406 loop around and keep looking for SYN. */
412 /* Get a packet header, putting the data in the supplied buffer.
413 PGARBAGE is a pointer to the number of garbage characters received
414 so far. The last character read is returned in *PCH. Returns 0
415 for success, -1 for timeout, -2 for error. */
418 mips_receive_trailer (trlr
, pgarbage
, pch
, timeout
)
427 for (i
= 0; i
< TRLR_LENGTH
; i
++)
429 ch
= mips_readchar (timeout
);
431 if (ch
== SERIAL_TIMEOUT
)
433 if (! TRLR_CHECK (ch
))
440 /* Get the checksum of a packet. HDR points to the packet header.
441 DATA points to the packet data. LEN is the length of DATA. */
444 mips_cksum (hdr
, data
, len
)
445 const unsigned char *hdr
;
446 const unsigned char *data
;
449 register const unsigned char *p
;
455 /* The initial SYN is not included in the checksum. */
469 /* Send a packet containing the given ASCII string. */
472 mips_send_packet (s
, get_ack
)
477 unsigned char *packet
;
482 if (len
> DATA_MAXLEN
)
483 error ("MIPS protocol data packet too long: %s", s
);
485 packet
= (unsigned char *) alloca (HDR_LENGTH
+ len
+ TRLR_LENGTH
+ 1);
487 packet
[HDR_INDX_SYN
] = HDR_SET_SYN (1, len
, mips_send_seq
);
488 packet
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (1, len
, mips_send_seq
);
489 packet
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (1, len
, mips_send_seq
);
490 packet
[HDR_INDX_SEQ
] = HDR_SET_SEQ (1, len
, mips_send_seq
);
492 memcpy (packet
+ HDR_LENGTH
, s
, len
);
494 cksum
= mips_cksum (packet
, packet
+ HDR_LENGTH
, len
);
495 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
496 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
497 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
499 /* Increment the sequence number. This will set mips_send_seq to
500 the sequence number we expect in the acknowledgement. */
501 mips_send_seq
= (mips_send_seq
+ 1) % SEQ_MODULOS
;
506 /* We can only have one outstanding data packet, so we just wait for
507 the acknowledgement here. Keep retransmitting the packet until
508 we get one, or until we've tried too many times. */
509 for (try = 0; try < mips_send_retries
; try++)
514 if (sr_get_debug () > 0)
516 packet
[HDR_LENGTH
+ len
+ TRLR_LENGTH
] = '\0';
517 printf_filtered ("Writing \"%s\"\n", packet
+ 1);
520 if (SERIAL_WRITE (mips_desc
, packet
,
521 HDR_LENGTH
+ len
+ TRLR_LENGTH
) != 0)
522 error ("write to target failed: %s", safe_strerror (errno
));
528 unsigned char hdr
[HDR_LENGTH
+ 1];
529 unsigned char trlr
[TRLR_LENGTH
+ 1];
533 /* Get the packet header. If we time out, resend the data
535 err
= mips_receive_header (hdr
, &garbage
, ch
, mips_retransmit_wait
);
541 /* If we get a data packet, assume it is a duplicate and
542 ignore it. FIXME: If the acknowledgement is lost, this
543 data packet may be the packet the remote sends after the
545 if (HDR_IS_DATA (hdr
))
548 /* If the length is not 0, this is a garbled packet. */
549 if (HDR_GET_LEN (hdr
) != 0)
552 /* Get the packet trailer. */
553 err
= mips_receive_trailer (trlr
, &garbage
, &ch
,
554 mips_retransmit_wait
);
556 /* If we timed out, resend the data packet. */
560 /* If we got a bad character, reread the header. */
564 /* If the checksum does not match the trailer checksum, this
565 is a bad packet; ignore it. */
566 if (mips_cksum (hdr
, (unsigned char *) NULL
, 0)
567 != TRLR_GET_CKSUM (trlr
))
570 if (sr_get_debug () > 0)
572 hdr
[HDR_LENGTH
] = '\0';
573 trlr
[TRLR_LENGTH
] = '\0';
574 printf_filtered ("Got ack %d \"%s%s\"\n",
575 HDR_GET_SEQ (hdr
), hdr
+ 1, trlr
);
578 /* If this ack is for the current packet, we're done. */
579 seq
= HDR_GET_SEQ (hdr
);
580 if (seq
== mips_send_seq
)
583 /* If this ack is for the last packet, resend the current
585 if ((seq
+ 1) % SEQ_MODULOS
== mips_send_seq
)
588 /* Otherwise this is a bad ack; ignore it. Increment the
589 garbage count to ensure that we do not stay in this loop
595 error ("Remote did not acknowledge packet");
598 /* Receive and acknowledge a packet, returning the data in BUFF (which
599 should be DATA_MAXLEN + 1 bytes). The protocol documentation
600 implies that only the sender retransmits packets, so this code just
601 waits silently for a packet. It returns the length of the received
605 mips_receive_packet (buff
)
611 unsigned char ack
[HDR_LENGTH
+ TRLR_LENGTH
+ 1];
618 unsigned char hdr
[HDR_LENGTH
];
619 unsigned char trlr
[TRLR_LENGTH
];
623 if (mips_receive_header (hdr
, &garbage
, ch
, mips_receive_wait
) != 0)
624 error ("Timed out waiting for remote packet");
628 /* An acknowledgement is probably a duplicate; ignore it. */
629 if (! HDR_IS_DATA (hdr
))
631 if (sr_get_debug () > 0)
632 printf_filtered ("Ignoring unexpected ACK\n");
636 /* If this is the wrong sequence number, ignore it. */
637 if (HDR_GET_SEQ (hdr
) != mips_receive_seq
)
639 if (sr_get_debug () > 0)
640 printf_filtered ("Ignoring sequence number %d (want %d)\n",
641 HDR_GET_SEQ (hdr
), mips_receive_seq
);
645 len
= HDR_GET_LEN (hdr
);
647 for (i
= 0; i
< len
; i
++)
651 rch
= mips_readchar (mips_receive_wait
);
657 if (rch
== SERIAL_TIMEOUT
)
658 error ("Timed out waiting for remote packet");
664 if (sr_get_debug () > 0)
665 printf_filtered ("Got new SYN after %d chars (wanted %d)\n",
670 err
= mips_receive_trailer (trlr
, &garbage
, &ch
, mips_receive_wait
);
672 error ("Timed out waiting for packet");
675 if (sr_get_debug () > 0)
676 printf_filtered ("Got SYN when wanted trailer\n");
680 if (mips_cksum (hdr
, buff
, len
) == TRLR_GET_CKSUM (trlr
))
683 if (sr_get_debug () > 0)
684 printf_filtered ("Bad checksum; data %d, trailer %d\n",
685 mips_cksum (hdr
, buff
, len
),
686 TRLR_GET_CKSUM (trlr
));
688 /* The checksum failed. Send an acknowledgement for the
689 previous packet to tell the remote to resend the packet. */
690 ack
[HDR_INDX_SYN
] = HDR_SET_SYN (0, 0, mips_receive_seq
);
691 ack
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq
);
692 ack
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (0, 0, mips_receive_seq
);
693 ack
[HDR_INDX_SEQ
] = HDR_SET_SEQ (0, 0, mips_receive_seq
);
695 cksum
= mips_cksum (ack
, (unsigned char *) NULL
, 0);
697 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
698 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
699 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
701 if (sr_get_debug () > 0)
703 ack
[HDR_LENGTH
+ TRLR_LENGTH
] = '\0';
704 printf_filtered ("Writing ack %d \"%s\"\n", mips_receive_seq
,
708 if (SERIAL_WRITE (mips_desc
, ack
, HDR_LENGTH
+ TRLR_LENGTH
) != 0)
709 error ("write to target failed: %s", safe_strerror (errno
));
712 if (sr_get_debug () > 0)
715 printf_filtered ("Got packet \"%s\"\n", buff
);
718 /* We got the packet. Send an acknowledgement. */
719 mips_receive_seq
= (mips_receive_seq
+ 1) % SEQ_MODULOS
;
721 ack
[HDR_INDX_SYN
] = HDR_SET_SYN (0, 0, mips_receive_seq
);
722 ack
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq
);
723 ack
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (0, 0, mips_receive_seq
);
724 ack
[HDR_INDX_SEQ
] = HDR_SET_SEQ (0, 0, mips_receive_seq
);
726 cksum
= mips_cksum (ack
, (unsigned char *) NULL
, 0);
728 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
729 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
730 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
732 if (sr_get_debug () > 0)
734 ack
[HDR_LENGTH
+ TRLR_LENGTH
] = '\0';
735 printf_filtered ("Writing ack %d \"%s\"\n", mips_receive_seq
,
739 if (SERIAL_WRITE (mips_desc
, ack
, HDR_LENGTH
+ TRLR_LENGTH
) != 0)
740 error ("write to target failed: %s", safe_strerror (errno
));
745 /* Optionally send a request to the remote system and optionally wait
746 for the reply. This implements the remote debugging protocol,
747 which is built on top of the packet protocol defined above. Each
748 request has an ADDR argument and a DATA argument. The following
749 requests are defined:
751 \0 don't send a request; just wait for a reply
752 i read word from instruction space at ADDR
753 d read word from data space at ADDR
754 I write DATA to instruction space at ADDR
755 D write DATA to data space at ADDR
756 r read register number ADDR
757 R set register number ADDR to value DATA
758 c continue execution (if ADDR != 1, set pc to ADDR)
759 s single step (if ADDR != 1, set pc to ADDR)
761 The read requests return the value requested. The write requests
762 return the previous value in the changed location. The execution
763 requests return a UNIX wait value (the approximate signal which
764 caused execution to stop is in the upper eight bits).
766 If PERR is not NULL, this function waits for a reply. If an error
767 occurs, it sets *PERR to 1 and sets errno according to what the
768 target board reports. */
771 mips_request (cmd
, addr
, data
, perr
)
777 char buff
[DATA_MAXLEN
+ 1];
787 fatal ("mips_request: Trying to send command before reply");
788 sprintf (buff
, "0x0 %c 0x%x 0x%x", cmd
, addr
, data
);
789 mips_send_packet (buff
, 1);
793 if (perr
== (int *) NULL
)
796 if (! mips_need_reply
)
797 fatal ("mips_request: Trying to get reply before command");
801 len
= mips_receive_packet (buff
);
804 if (sscanf (buff
, "0x%x %c 0x%x 0x%x",
805 &rpid
, &rcmd
, &rerrflg
, &rresponse
) != 4
806 || (cmd
!= '\0' && rcmd
!= cmd
))
807 error ("Bad response from remote board");
813 /* FIXME: This will returns MIPS errno numbers, which may or may
814 not be the same as errno values used on other systems. If
815 they stick to common errno values, they will be the same, but
816 if they don't, they must be translated. */
826 /* Initialize a new connection to the MIPS board, and make sure we are
835 char buff
[DATA_MAXLEN
+ 1];
838 if (mips_initializing
)
841 mips_initializing
= 1;
844 mips_receive_seq
= 0;
846 /* The board seems to want to send us a packet. I don't know what
847 it means. The packet seems to be triggered by a carriage return
848 character, although perhaps any character would do. */
850 SERIAL_WRITE (mips_desc
, &cr
, 1);
852 hold_wait
= mips_receive_wait
;
853 mips_receive_wait
= 3;
856 while (catch_errors (mips_receive_packet
, buff
, (char *) NULL
,
863 error ("Could not connect to target");
866 /* We did not receive the packet we expected; try resetting the
867 board and trying again. */
868 printf_filtered ("Failed to initialize; trying to reset board\n");
870 SERIAL_WRITE (mips_desc
, &cc
, 1);
872 SERIAL_WRITE (mips_desc
, "\rdb tty0\r", sizeof "\rdb tty0\r" - 1);
875 SERIAL_WRITE (mips_desc
, &cr
, 1);
878 mips_receive_wait
= hold_wait
;
879 mips_initializing
= 0;
881 /* If this doesn't call error, we have connected; we don't care if
882 the request itself succeeds or fails. */
883 mips_request ('r', (unsigned int) 0, (unsigned int) 0, &err
);
886 /* Open a connection to the remote board. */
889 mips_open (name
, from_tty
)
895 "To open a MIPS remote debugging connection, you need to specify what serial\n\
896 device is attached to the target board (e.g., /dev/ttya).");
898 target_preopen (from_tty
);
901 unpush_target (&mips_ops
);
903 mips_desc
= SERIAL_OPEN (name
);
904 if (mips_desc
== (serial_t
) NULL
)
905 perror_with_name (name
);
907 SERIAL_RAW (mips_desc
);
914 printf ("Remote MIPS debugging using %s\n", name
);
915 push_target (&mips_ops
); /* Switch to using remote target now */
917 /* FIXME: Should we call start_remote here? */
920 /* Close a connection to the remote board. */
923 mips_close (quitting
)
932 /* Get the board out of remote debugging mode. */
933 mips_request ('x', (unsigned int) 0, (unsigned int) 0, &err
);
935 SERIAL_CLOSE (mips_desc
);
939 /* Detach from the remote board. */
942 mips_detach (args
, from_tty
)
947 error ("Argument given to \"detach\" when remotely debugging.");
951 printf ("Ending remote MIPS debugging.\n");
954 /* Tell the target board to resume. This does not wait for a reply
958 mips_resume (pid
, step
, siggnal
)
959 int pid
, step
, siggnal
;
962 error ("Can't send signals to a remote system. Try `handle %d ignore'.",
965 mips_request (step
? 's' : 'c',
971 /* Wait until the remote stops, and return a wait status. */
980 /* If we have not sent a single step or continue command, then the
981 board is waiting for us to do something. Return a status
982 indicating that it is stopped. */
983 if (! mips_need_reply
)
985 WSETSTOP (*status
, SIGTRAP
);
989 rstatus
= mips_request ('\0', (unsigned int) 0, (unsigned int) 0, &err
);
991 error ("Remote failure: %s", safe_strerror (errno
));
993 /* FIXME: The target board uses numeric signal values which are
994 those used on MIPS systems. If the host uses different signal
995 values, we need to translate here. I believe all Unix systems
996 use the same values for the signals the board can return, which
997 are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP. */
999 /* FIXME: The target board uses a standard Unix wait status int. If
1000 the host system does not, we must translate here. */
1007 /* We have to map between the register numbers used by gdb and the
1008 register numbers used by the debugging protocol. This function
1009 assumes that we are using tm-mips.h. */
1011 #define REGNO_OFFSET 96
1014 mips_map_regno (regno
)
1019 if (regno
>= FP0_REGNUM
&& regno
< FP0_REGNUM
+ 32)
1020 return regno
- FP0_REGNUM
+ 32;
1024 return REGNO_OFFSET
+ 0;
1026 return REGNO_OFFSET
+ 1;
1028 return REGNO_OFFSET
+ 2;
1030 return REGNO_OFFSET
+ 3;
1032 return REGNO_OFFSET
+ 4;
1034 return REGNO_OFFSET
+ 5;
1036 /* FIXME: Is there a way to get the status register? */
1041 /* Fetch the remote registers. */
1044 mips_fetch_registers (regno
)
1052 for (regno
= 0; regno
< NUM_REGS
; regno
++)
1053 mips_fetch_registers (regno
);
1057 val
= mips_request ('r', (unsigned int) mips_map_regno (regno
),
1058 (unsigned int) 0, &err
);
1060 error ("Can't read register %d: %s", regno
, safe_strerror (errno
));
1063 char buf
[MAX_REGISTER_RAW_SIZE
];
1065 /* We got the number the register holds, but gdb expects to see a
1066 value in the target byte ordering. */
1067 store_unsigned_integer (buf
, REGISTER_RAW_SIZE (regno
), val
);
1068 supply_register (regno
, buf
);
1072 /* Prepare to store registers. The MIPS protocol can store individual
1073 registers, so this function doesn't have to do anything. */
1076 mips_prepare_to_store ()
1080 /* Store remote register(s). */
1083 mips_store_registers (regno
)
1090 for (regno
= 0; regno
< NUM_REGS
; regno
++)
1091 mips_store_registers (regno
);
1095 mips_request ('R', (unsigned int) mips_map_regno (regno
),
1096 (unsigned int) read_register (regno
),
1099 error ("Can't write register %d: %s", regno
, safe_strerror (errno
));
1102 /* Fetch a word from the target board. */
1105 mips_fetch_word (addr
)
1111 val
= mips_request ('d', (unsigned int) addr
, (unsigned int) 0, &err
);
1114 /* Data space failed; try instruction space. */
1115 val
= mips_request ('i', (unsigned int) addr
, (unsigned int) 0, &err
);
1117 error ("Can't read address 0x%x: %s", addr
, safe_strerror (errno
));
1122 /* Store a word to the target board. */
1125 mips_store_word (addr
, val
)
1131 mips_request ('D', (unsigned int) addr
, (unsigned int) val
, &err
);
1134 /* Data space failed; try instruction space. */
1135 mips_request ('I', (unsigned int) addr
, (unsigned int) val
, &err
);
1137 error ("Can't write address 0x%x: %s", addr
, safe_strerror (errno
));
1141 /* Read or write LEN bytes from inferior memory at MEMADDR,
1142 transferring to or from debugger address MYADDR. Write to inferior
1143 if SHOULD_WRITE is nonzero. Returns length of data written or
1144 read; 0 for error. Note that protocol gives us the correct value
1145 for a longword, since it transfers values in ASCII. We want the
1146 byte values, so we have to swap the longword values. */
1149 mips_xfer_memory (memaddr
, myaddr
, len
, write
, ignore
)
1154 struct target_ops
*ignore
;
1157 /* Round starting address down to longword boundary. */
1158 register CORE_ADDR addr
= memaddr
&~ 3;
1159 /* Round ending address up; get number of longwords that makes. */
1160 register int count
= (((memaddr
+ len
) - addr
) + 3) / 4;
1161 /* Allocate buffer of that many longwords. */
1162 register char *buffer
= alloca (count
* 4);
1166 /* Fill start and end extra bytes of buffer with existing data. */
1167 if (addr
!= memaddr
|| len
< 4)
1169 /* Need part of initial word -- fetch it. */
1170 store_unsigned_integer (&buffer
[0], 4, mips_fetch_word (addr
));
1175 /* Need part of last word -- fetch it. FIXME: we do this even
1176 if we don't need it. */
1177 store_unsigned_integer (&buffer
[(count
- 1) * 4], 4,
1178 mips_fetch_word (addr
+ (count
- 1) * 4));
1181 /* Copy data to be written over corresponding part of buffer */
1183 memcpy ((char *) buffer
+ (memaddr
& 3), myaddr
, len
);
1185 /* Write the entire buffer. */
1187 for (i
= 0; i
< count
; i
++, addr
+= 4)
1189 mips_store_word (addr
, extract_unsigned_integer (&buffer
[i
*4], 4));
1190 /* FIXME: Do we want a QUIT here? */
1195 /* Read all the longwords */
1196 for (i
= 0; i
< count
; i
++, addr
+= 4)
1198 store_unsigned_integer (&buffer
[i
*4], 4, mips_fetch_word (addr
));
1202 /* Copy appropriate bytes out of the buffer. */
1203 memcpy (myaddr
, buffer
+ (memaddr
& 3), len
);
1208 /* Print info on this target. */
1211 mips_files_info (ignore
)
1212 struct target_ops
*ignore
;
1214 printf ("Debugging a MIPS board over a serial line.\n");
1217 /* Kill the process running on the board. This will actually only
1218 work if we are doing remote debugging over the console input. I
1219 think that if IDT/sim had the remote debug interrupt enabled on the
1220 right port, we could interrupt the process with a break signal. */
1232 SERIAL_WRITE (mips_desc
, &cc
, 1);
1234 target_mourn_inferior ();
1239 /* Start running on the target board. */
1242 mips_create_inferior (execfile
, args
, env
)
1250 error ("Can't pass arguments to remote MIPS board.");
1252 if (execfile
== 0 || exec_bfd
== 0)
1253 error ("No exec file specified");
1255 entry_pt
= (CORE_ADDR
) bfd_get_start_address (exec_bfd
);
1257 init_wait_for_inferior ();
1259 /* FIXME: Should we set inferior_pid here? */
1261 proceed (entry_pt
, -1, 0);
1264 /* Clean up after a process. Actually nothing to do. */
1267 mips_mourn_inferior ()
1269 unpush_target (&mips_ops
);
1270 generic_mourn_inferior ();
1273 /* The target vector. */
1275 struct target_ops mips_ops
=
1277 "mips", /* to_shortname */
1278 "Remote MIPS debugging over serial line", /* to_longname */
1279 "Debug a board using the MIPS remote debugging protocol over a serial line.\n\
1280 Specify the serial device it is connected to (e.g., /dev/ttya).", /* to_doc */
1281 mips_open
, /* to_open */
1282 mips_close
, /* to_close */
1283 NULL
, /* to_attach */
1284 mips_detach
, /* to_detach */
1285 mips_resume
, /* to_resume */
1286 mips_wait
, /* to_wait */
1287 mips_fetch_registers
, /* to_fetch_registers */
1288 mips_store_registers
, /* to_store_registers */
1289 mips_prepare_to_store
, /* to_prepare_to_store */
1290 mips_xfer_memory
, /* to_xfer_memory */
1291 mips_files_info
, /* to_files_info */
1292 NULL
, /* to_insert_breakpoint */
1293 NULL
, /* to_remove_breakpoint */
1294 NULL
, /* to_terminal_init */
1295 NULL
, /* to_terminal_inferior */
1296 NULL
, /* to_terminal_ours_for_output */
1297 NULL
, /* to_terminal_ours */
1298 NULL
, /* to_terminal_info */
1299 mips_kill
, /* to_kill */
1300 generic_load
, /* to_load */
1301 NULL
, /* to_lookup_symbol */
1302 mips_create_inferior
, /* to_create_inferior */
1303 mips_mourn_inferior
, /* to_mourn_inferior */
1304 NULL
, /* to_can_run */
1305 NULL
, /* to_notice_signals */
1306 process_stratum
, /* to_stratum */
1308 1, /* to_has_all_memory */
1309 1, /* to_has_memory */
1310 1, /* to_has_stack */
1311 1, /* to_has_registers */
1312 1, /* to_has_execution */
1313 NULL
, /* sections */
1314 NULL
, /* sections_end */
1315 OPS_MAGIC
/* to_magic */
1319 _initialize_remote_mips ()
1321 add_target (&mips_ops
);
1324 add_set_cmd ("timeout", no_class
, var_zinteger
,
1325 (char *) &mips_receive_wait
,
1326 "Set timeout in seconds for remote MIPS serial I/O.",
1331 add_set_cmd ("retransmit-timeout", no_class
, var_zinteger
,
1332 (char *) &mips_retransmit_wait
,
1333 "Set retransmit timeout in seconds for remote MIPS serial I/O.\n\
1334 This is the number of seconds to wait for an acknowledgement to a packet\n\
1335 before resending the packet.", &setlist
),
This page took 0.058565 seconds and 5 git commands to generate.