1 /* Am29k-dependent portions of the RPC protocol
2 used with a VxWorks target
4 Contributed by Wind River Systems.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
26 #include "vx-share/regPacket.h"
34 #include "symfile.h" /* for struct complaint */
36 #include "gdb_string.h"
40 #include <sys/types.h>
42 #include <sys/socket.h>
44 #ifdef _AIX /* IBM claims "void *malloc()" not char * */
45 #define malloc bogon_malloc
49 #include <sys/time.h> /* UTek's <rpc/rpc.h> doesn't #incl this */
51 #include "vx-share/ptrace.h"
52 #include "vx-share/xdr_ptrace.h"
53 #include "vx-share/xdr_ld.h"
54 #include "vx-share/xdr_rdb.h"
55 #include "vx-share/dbgRpcLib.h"
57 /* get rid of value.h if possible */
61 /* Flag set if target has fpu */
63 extern int target_has_fp
;
65 /* Generic register read/write routines in remote-vx.c. */
67 extern void net_read_registers ();
68 extern void net_write_registers ();
70 /* Read a register or registers from the VxWorks target.
71 REGNO is the register to read, or -1 for all; currently,
72 it is ignored. FIXME look at regno to improve efficiency. */
75 vx_read_register (regno
)
78 char am29k_greg_packet
[AM29K_GREG_PLEN
];
79 char am29k_fpreg_packet
[AM29K_FPREG_PLEN
];
81 /* Get general-purpose registers. When copying values into
82 registers [], don't assume that a location in registers []
83 is properly aligned for the target data type. */
85 net_read_registers (am29k_greg_packet
, AM29K_GREG_PLEN
, PTRACE_GETREGS
);
87 /* Now copy the register values into registers[].
88 Note that this code depends on the ordering of the REGNUMs
89 as defined in "tm-29k.h". */
91 bcopy (&am29k_greg_packet
[AM29K_R_GR96
],
92 ®isters
[REGISTER_BYTE (GR96_REGNUM
)], 160 * AM29K_GREG_SIZE
);
93 bcopy (&am29k_greg_packet
[AM29K_R_VAB
],
94 ®isters
[REGISTER_BYTE (VAB_REGNUM
)], 15 * AM29K_GREG_SIZE
);
95 registers
[REGISTER_BYTE (INTE_REGNUM
)] = am29k_greg_packet
[AM29K_R_INTE
];
96 bcopy (&am29k_greg_packet
[AM29K_R_RSP
],
97 ®isters
[REGISTER_BYTE (GR1_REGNUM
)], 5 * AM29K_GREG_SIZE
);
99 /* PAD For now, don't care about exop register */
101 memset (®isters
[REGISTER_BYTE (EXO_REGNUM
)], '\0', AM29K_GREG_SIZE
);
103 /* If the target has floating point registers, fetch them.
104 Otherwise, zero the floating point register values in
105 registers[] for good measure, even though we might not
110 net_read_registers (am29k_fpreg_packet
, AM29K_FPREG_PLEN
,
112 registers
[REGISTER_BYTE (FPE_REGNUM
)] = am29k_fpreg_packet
[AM29K_R_FPE
];
113 registers
[REGISTER_BYTE (FPS_REGNUM
)] = am29k_fpreg_packet
[AM29K_R_FPS
];
115 /* PAD For now, don't care about registers (?) AI0 to q */
117 memset (®isters
[REGISTER_BYTE (161)], '\0', 21 * AM29K_FPREG_SIZE
);
121 memset (®isters
[REGISTER_BYTE (FPE_REGNUM
)], '\0', AM29K_FPREG_SIZE
);
122 memset (®isters
[REGISTER_BYTE (FPS_REGNUM
)], '\0', AM29K_FPREG_SIZE
);
124 /* PAD For now, don't care about registers (?) AI0 to q */
126 memset (®isters
[REGISTER_BYTE (161)], '\0', 21 * AM29K_FPREG_SIZE
);
129 /* Mark the register cache valid. */
131 registers_fetched ();
134 /* Store a register or registers into the VxWorks target.
135 REGNO is the register to store, or -1 for all; currently,
136 it is ignored. FIXME look at regno to improve efficiency. */
139 vx_write_register (regno
)
142 char am29k_greg_packet
[AM29K_GREG_PLEN
];
143 char am29k_fpreg_packet
[AM29K_FPREG_PLEN
];
145 /* Store general purpose registers. When copying values from
146 registers [], don't assume that a location in registers []
147 is properly aligned for the target data type. */
149 bcopy (®isters
[REGISTER_BYTE (GR96_REGNUM
)],
150 &am29k_greg_packet
[AM29K_R_GR96
], 160 * AM29K_GREG_SIZE
);
151 bcopy (®isters
[REGISTER_BYTE (VAB_REGNUM
)],
152 &am29k_greg_packet
[AM29K_R_VAB
], 15 * AM29K_GREG_SIZE
);
153 am29k_greg_packet
[AM29K_R_INTE
] = registers
[REGISTER_BYTE (INTE_REGNUM
)];
154 bcopy (®isters
[REGISTER_BYTE (GR1_REGNUM
)],
155 &am29k_greg_packet
[AM29K_R_RSP
], 5 * AM29K_GREG_SIZE
);
157 net_write_registers (am29k_greg_packet
, AM29K_GREG_PLEN
, PTRACE_SETREGS
);
159 /* Store floating point registers if the target has them. */
163 am29k_fpreg_packet
[AM29K_R_FPE
] = registers
[REGISTER_BYTE (FPE_REGNUM
)];
164 am29k_fpreg_packet
[AM29K_R_FPS
] = registers
[REGISTER_BYTE (FPS_REGNUM
)];
166 net_write_registers (am29k_fpreg_packet
, AM29K_FPREG_PLEN
,
171 /* VxWorks zeroes fp when the task is initialized; we use this
172 to terminate the frame chain. Chain means here the nominal address of
173 a frame, that is, the return address (lr0) address in the stack. To
174 obtain the frame pointer (lr1) contents, we must add 4 bytes.
175 Note : may be we should modify init_frame_info() to get the frame pointer
176 and store it into the frame_info struct rather than reading its
177 contents when FRAME_CHAIN_VALID is invoked. */
180 vx29k_frame_chain_valid (chain
, thisframe
)
182 struct frame_info
*thisframe
; /* not used here */
186 read_memory ((CORE_ADDR
) (chain
+ 4), (char *) &fp_contents
, 4);
187 return (fp_contents
!= 0);
This page took 0.032546 seconds and 4 git commands to generate.