* defs.h (extract_signed_integer, extract_unsigned_integer,
[deliverable/binutils-gdb.git] / gdb / s390-tdep.c
1 /* Target-dependent code for GDB, the GNU debugger.
2
3 Copyright (C) 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
4 Free Software Foundation, Inc.
5
6 Contributed by D.J. Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
7 for IBM Deutschland Entwicklung GmbH, IBM Corporation.
8
9 This file is part of GDB.
10
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 3 of the License, or
14 (at your option) any later version.
15
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
20
21 You should have received a copy of the GNU General Public License
22 along with this program. If not, see <http://www.gnu.org/licenses/>. */
23
24 #include "defs.h"
25 #include "arch-utils.h"
26 #include "frame.h"
27 #include "inferior.h"
28 #include "symtab.h"
29 #include "target.h"
30 #include "gdbcore.h"
31 #include "gdbcmd.h"
32 #include "objfiles.h"
33 #include "floatformat.h"
34 #include "regcache.h"
35 #include "trad-frame.h"
36 #include "frame-base.h"
37 #include "frame-unwind.h"
38 #include "dwarf2-frame.h"
39 #include "reggroups.h"
40 #include "regset.h"
41 #include "value.h"
42 #include "gdb_assert.h"
43 #include "dis-asm.h"
44 #include "solib-svr4.h"
45 #include "prologue-value.h"
46
47 #include "s390-tdep.h"
48
49
50 /* The tdep structure. */
51
52 struct gdbarch_tdep
53 {
54 /* ABI version. */
55 enum { ABI_LINUX_S390, ABI_LINUX_ZSERIES } abi;
56
57 /* Core file register sets. */
58 const struct regset *gregset;
59 int sizeof_gregset;
60
61 const struct regset *fpregset;
62 int sizeof_fpregset;
63 };
64
65
66 /* Return the name of register REGNUM. */
67 static const char *
68 s390_register_name (struct gdbarch *gdbarch, int regnum)
69 {
70 static const char *register_names[S390_NUM_TOTAL_REGS] =
71 {
72 /* Program Status Word. */
73 "pswm", "pswa",
74 /* General Purpose Registers. */
75 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
76 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
77 /* Access Registers. */
78 "acr0", "acr1", "acr2", "acr3", "acr4", "acr5", "acr6", "acr7",
79 "acr8", "acr9", "acr10", "acr11", "acr12", "acr13", "acr14", "acr15",
80 /* Floating Point Control Word. */
81 "fpc",
82 /* Floating Point Registers. */
83 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",
84 "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",
85 /* Pseudo registers. */
86 "pc", "cc",
87 };
88
89 gdb_assert (regnum >= 0 && regnum < S390_NUM_TOTAL_REGS);
90 return register_names[regnum];
91 }
92
93 /* Return the GDB type object for the "standard" data type of data in
94 register REGNUM. */
95 static struct type *
96 s390_register_type (struct gdbarch *gdbarch, int regnum)
97 {
98 if (regnum == S390_PSWM_REGNUM || regnum == S390_PSWA_REGNUM)
99 return builtin_type (gdbarch)->builtin_long;
100 if (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM)
101 return builtin_type (gdbarch)->builtin_long;
102 if (regnum >= S390_A0_REGNUM && regnum <= S390_A15_REGNUM)
103 return builtin_type (gdbarch)->builtin_int;
104 if (regnum == S390_FPC_REGNUM)
105 return builtin_type (gdbarch)->builtin_int;
106 if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM)
107 return builtin_type (gdbarch)->builtin_double;
108 if (regnum == S390_PC_REGNUM)
109 return builtin_type (gdbarch)->builtin_func_ptr;
110 if (regnum == S390_CC_REGNUM)
111 return builtin_type (gdbarch)->builtin_int;
112
113 internal_error (__FILE__, __LINE__, _("invalid regnum"));
114 }
115
116 /* DWARF Register Mapping. */
117
118 static int s390_dwarf_regmap[] =
119 {
120 /* General Purpose Registers. */
121 S390_R0_REGNUM, S390_R1_REGNUM, S390_R2_REGNUM, S390_R3_REGNUM,
122 S390_R4_REGNUM, S390_R5_REGNUM, S390_R6_REGNUM, S390_R7_REGNUM,
123 S390_R8_REGNUM, S390_R9_REGNUM, S390_R10_REGNUM, S390_R11_REGNUM,
124 S390_R12_REGNUM, S390_R13_REGNUM, S390_R14_REGNUM, S390_R15_REGNUM,
125
126 /* Floating Point Registers. */
127 S390_F0_REGNUM, S390_F2_REGNUM, S390_F4_REGNUM, S390_F6_REGNUM,
128 S390_F1_REGNUM, S390_F3_REGNUM, S390_F5_REGNUM, S390_F7_REGNUM,
129 S390_F8_REGNUM, S390_F10_REGNUM, S390_F12_REGNUM, S390_F14_REGNUM,
130 S390_F9_REGNUM, S390_F11_REGNUM, S390_F13_REGNUM, S390_F15_REGNUM,
131
132 /* Control Registers (not mapped). */
133 -1, -1, -1, -1, -1, -1, -1, -1,
134 -1, -1, -1, -1, -1, -1, -1, -1,
135
136 /* Access Registers. */
137 S390_A0_REGNUM, S390_A1_REGNUM, S390_A2_REGNUM, S390_A3_REGNUM,
138 S390_A4_REGNUM, S390_A5_REGNUM, S390_A6_REGNUM, S390_A7_REGNUM,
139 S390_A8_REGNUM, S390_A9_REGNUM, S390_A10_REGNUM, S390_A11_REGNUM,
140 S390_A12_REGNUM, S390_A13_REGNUM, S390_A14_REGNUM, S390_A15_REGNUM,
141
142 /* Program Status Word. */
143 S390_PSWM_REGNUM,
144 S390_PSWA_REGNUM
145 };
146
147 /* Convert DWARF register number REG to the appropriate register
148 number used by GDB. */
149 static int
150 s390_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
151 {
152 int regnum = -1;
153
154 if (reg >= 0 && reg < ARRAY_SIZE (s390_dwarf_regmap))
155 regnum = s390_dwarf_regmap[reg];
156
157 if (regnum == -1)
158 warning (_("Unmapped DWARF Register #%d encountered."), reg);
159
160 return regnum;
161 }
162
163 /* Pseudo registers - PC and condition code. */
164
165 static void
166 s390_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
167 int regnum, gdb_byte *buf)
168 {
169 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
170 ULONGEST val;
171
172 switch (regnum)
173 {
174 case S390_PC_REGNUM:
175 regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &val);
176 store_unsigned_integer (buf, 4, byte_order, val & 0x7fffffff);
177 break;
178
179 case S390_CC_REGNUM:
180 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val);
181 store_unsigned_integer (buf, 4, byte_order, (val >> 12) & 3);
182 break;
183
184 default:
185 internal_error (__FILE__, __LINE__, _("invalid regnum"));
186 }
187 }
188
189 static void
190 s390_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
191 int regnum, const gdb_byte *buf)
192 {
193 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
194 ULONGEST val, psw;
195
196 switch (regnum)
197 {
198 case S390_PC_REGNUM:
199 val = extract_unsigned_integer (buf, 4, byte_order);
200 regcache_raw_read_unsigned (regcache, S390_PSWA_REGNUM, &psw);
201 psw = (psw & 0x80000000) | (val & 0x7fffffff);
202 regcache_raw_write_unsigned (regcache, S390_PSWA_REGNUM, psw);
203 break;
204
205 case S390_CC_REGNUM:
206 val = extract_unsigned_integer (buf, 4, byte_order);
207 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw);
208 psw = (psw & ~((ULONGEST)3 << 12)) | ((val & 3) << 12);
209 regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw);
210 break;
211
212 default:
213 internal_error (__FILE__, __LINE__, _("invalid regnum"));
214 }
215 }
216
217 static void
218 s390x_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache,
219 int regnum, gdb_byte *buf)
220 {
221 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
222 ULONGEST val;
223
224 switch (regnum)
225 {
226 case S390_PC_REGNUM:
227 regcache_raw_read (regcache, S390_PSWA_REGNUM, buf);
228 break;
229
230 case S390_CC_REGNUM:
231 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &val);
232 store_unsigned_integer (buf, 4, byte_order, (val >> 44) & 3);
233 break;
234
235 default:
236 internal_error (__FILE__, __LINE__, _("invalid regnum"));
237 }
238 }
239
240 static void
241 s390x_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache,
242 int regnum, const gdb_byte *buf)
243 {
244 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
245 ULONGEST val, psw;
246
247 switch (regnum)
248 {
249 case S390_PC_REGNUM:
250 regcache_raw_write (regcache, S390_PSWA_REGNUM, buf);
251 break;
252
253 case S390_CC_REGNUM:
254 val = extract_unsigned_integer (buf, 4, byte_order);
255 regcache_raw_read_unsigned (regcache, S390_PSWM_REGNUM, &psw);
256 psw = (psw & ~((ULONGEST)3 << 44)) | ((val & 3) << 44);
257 regcache_raw_write_unsigned (regcache, S390_PSWM_REGNUM, psw);
258 break;
259
260 default:
261 internal_error (__FILE__, __LINE__, _("invalid regnum"));
262 }
263 }
264
265 /* 'float' values are stored in the upper half of floating-point
266 registers, even though we are otherwise a big-endian platform. */
267
268 static struct value *
269 s390_value_from_register (struct type *type, int regnum,
270 struct frame_info *frame)
271 {
272 struct value *value = default_value_from_register (type, regnum, frame);
273 int len = TYPE_LENGTH (type);
274
275 if (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM && len < 8)
276 set_value_offset (value, 0);
277
278 return value;
279 }
280
281 /* Register groups. */
282
283 static int
284 s390_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
285 struct reggroup *group)
286 {
287 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
288
289 /* Registers displayed via 'info regs'. */
290 if (group == general_reggroup)
291 return (regnum >= S390_R0_REGNUM && regnum <= S390_R15_REGNUM)
292 || regnum == S390_PC_REGNUM
293 || regnum == S390_CC_REGNUM;
294
295 /* Registers displayed via 'info float'. */
296 if (group == float_reggroup)
297 return (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM)
298 || regnum == S390_FPC_REGNUM;
299
300 /* Registers that need to be saved/restored in order to
301 push or pop frames. */
302 if (group == save_reggroup || group == restore_reggroup)
303 return regnum != S390_PSWM_REGNUM && regnum != S390_PSWA_REGNUM;
304
305 return default_register_reggroup_p (gdbarch, regnum, group);
306 }
307
308
309 /* Core file register sets. */
310
311 int s390_regmap_gregset[S390_NUM_REGS] =
312 {
313 /* Program Status Word. */
314 0x00, 0x04,
315 /* General Purpose Registers. */
316 0x08, 0x0c, 0x10, 0x14,
317 0x18, 0x1c, 0x20, 0x24,
318 0x28, 0x2c, 0x30, 0x34,
319 0x38, 0x3c, 0x40, 0x44,
320 /* Access Registers. */
321 0x48, 0x4c, 0x50, 0x54,
322 0x58, 0x5c, 0x60, 0x64,
323 0x68, 0x6c, 0x70, 0x74,
324 0x78, 0x7c, 0x80, 0x84,
325 /* Floating Point Control Word. */
326 -1,
327 /* Floating Point Registers. */
328 -1, -1, -1, -1, -1, -1, -1, -1,
329 -1, -1, -1, -1, -1, -1, -1, -1,
330 };
331
332 int s390x_regmap_gregset[S390_NUM_REGS] =
333 {
334 0x00, 0x08,
335 /* General Purpose Registers. */
336 0x10, 0x18, 0x20, 0x28,
337 0x30, 0x38, 0x40, 0x48,
338 0x50, 0x58, 0x60, 0x68,
339 0x70, 0x78, 0x80, 0x88,
340 /* Access Registers. */
341 0x90, 0x94, 0x98, 0x9c,
342 0xa0, 0xa4, 0xa8, 0xac,
343 0xb0, 0xb4, 0xb8, 0xbc,
344 0xc0, 0xc4, 0xc8, 0xcc,
345 /* Floating Point Control Word. */
346 -1,
347 /* Floating Point Registers. */
348 -1, -1, -1, -1, -1, -1, -1, -1,
349 -1, -1, -1, -1, -1, -1, -1, -1,
350 };
351
352 int s390_regmap_fpregset[S390_NUM_REGS] =
353 {
354 /* Program Status Word. */
355 -1, -1,
356 /* General Purpose Registers. */
357 -1, -1, -1, -1, -1, -1, -1, -1,
358 -1, -1, -1, -1, -1, -1, -1, -1,
359 /* Access Registers. */
360 -1, -1, -1, -1, -1, -1, -1, -1,
361 -1, -1, -1, -1, -1, -1, -1, -1,
362 /* Floating Point Control Word. */
363 0x00,
364 /* Floating Point Registers. */
365 0x08, 0x10, 0x18, 0x20,
366 0x28, 0x30, 0x38, 0x40,
367 0x48, 0x50, 0x58, 0x60,
368 0x68, 0x70, 0x78, 0x80,
369 };
370
371 /* Supply register REGNUM from the register set REGSET to register cache
372 REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
373 static void
374 s390_supply_regset (const struct regset *regset, struct regcache *regcache,
375 int regnum, const void *regs, size_t len)
376 {
377 const int *offset = regset->descr;
378 int i;
379
380 for (i = 0; i < S390_NUM_REGS; i++)
381 {
382 if ((regnum == i || regnum == -1) && offset[i] != -1)
383 regcache_raw_supply (regcache, i, (const char *)regs + offset[i]);
384 }
385 }
386
387 /* Collect register REGNUM from the register cache REGCACHE and store
388 it in the buffer specified by REGS and LEN as described by the
389 general-purpose register set REGSET. If REGNUM is -1, do this for
390 all registers in REGSET. */
391 static void
392 s390_collect_regset (const struct regset *regset,
393 const struct regcache *regcache,
394 int regnum, void *regs, size_t len)
395 {
396 const int *offset = regset->descr;
397 int i;
398
399 for (i = 0; i < S390_NUM_REGS; i++)
400 {
401 if ((regnum == i || regnum == -1) && offset[i] != -1)
402 regcache_raw_collect (regcache, i, (char *)regs + offset[i]);
403 }
404 }
405
406 static const struct regset s390_gregset = {
407 s390_regmap_gregset,
408 s390_supply_regset,
409 s390_collect_regset
410 };
411
412 static const struct regset s390x_gregset = {
413 s390x_regmap_gregset,
414 s390_supply_regset,
415 s390_collect_regset
416 };
417
418 static const struct regset s390_fpregset = {
419 s390_regmap_fpregset,
420 s390_supply_regset,
421 s390_collect_regset
422 };
423
424 /* Return the appropriate register set for the core section identified
425 by SECT_NAME and SECT_SIZE. */
426 static const struct regset *
427 s390_regset_from_core_section (struct gdbarch *gdbarch,
428 const char *sect_name, size_t sect_size)
429 {
430 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
431
432 if (strcmp (sect_name, ".reg") == 0 && sect_size >= tdep->sizeof_gregset)
433 return tdep->gregset;
434
435 if (strcmp (sect_name, ".reg2") == 0 && sect_size >= tdep->sizeof_fpregset)
436 return tdep->fpregset;
437
438 return NULL;
439 }
440
441
442 /* Decoding S/390 instructions. */
443
444 /* Named opcode values for the S/390 instructions we recognize. Some
445 instructions have their opcode split across two fields; those are the
446 op1_* and op2_* enums. */
447 enum
448 {
449 op1_lhi = 0xa7, op2_lhi = 0x08,
450 op1_lghi = 0xa7, op2_lghi = 0x09,
451 op1_lgfi = 0xc0, op2_lgfi = 0x01,
452 op_lr = 0x18,
453 op_lgr = 0xb904,
454 op_l = 0x58,
455 op1_ly = 0xe3, op2_ly = 0x58,
456 op1_lg = 0xe3, op2_lg = 0x04,
457 op_lm = 0x98,
458 op1_lmy = 0xeb, op2_lmy = 0x98,
459 op1_lmg = 0xeb, op2_lmg = 0x04,
460 op_st = 0x50,
461 op1_sty = 0xe3, op2_sty = 0x50,
462 op1_stg = 0xe3, op2_stg = 0x24,
463 op_std = 0x60,
464 op_stm = 0x90,
465 op1_stmy = 0xeb, op2_stmy = 0x90,
466 op1_stmg = 0xeb, op2_stmg = 0x24,
467 op1_aghi = 0xa7, op2_aghi = 0x0b,
468 op1_ahi = 0xa7, op2_ahi = 0x0a,
469 op1_agfi = 0xc2, op2_agfi = 0x08,
470 op1_afi = 0xc2, op2_afi = 0x09,
471 op1_algfi= 0xc2, op2_algfi= 0x0a,
472 op1_alfi = 0xc2, op2_alfi = 0x0b,
473 op_ar = 0x1a,
474 op_agr = 0xb908,
475 op_a = 0x5a,
476 op1_ay = 0xe3, op2_ay = 0x5a,
477 op1_ag = 0xe3, op2_ag = 0x08,
478 op1_slgfi= 0xc2, op2_slgfi= 0x04,
479 op1_slfi = 0xc2, op2_slfi = 0x05,
480 op_sr = 0x1b,
481 op_sgr = 0xb909,
482 op_s = 0x5b,
483 op1_sy = 0xe3, op2_sy = 0x5b,
484 op1_sg = 0xe3, op2_sg = 0x09,
485 op_nr = 0x14,
486 op_ngr = 0xb980,
487 op_la = 0x41,
488 op1_lay = 0xe3, op2_lay = 0x71,
489 op1_larl = 0xc0, op2_larl = 0x00,
490 op_basr = 0x0d,
491 op_bas = 0x4d,
492 op_bcr = 0x07,
493 op_bc = 0x0d,
494 op1_bras = 0xa7, op2_bras = 0x05,
495 op1_brasl= 0xc0, op2_brasl= 0x05,
496 op1_brc = 0xa7, op2_brc = 0x04,
497 op1_brcl = 0xc0, op2_brcl = 0x04,
498 };
499
500
501 /* Read a single instruction from address AT. */
502
503 #define S390_MAX_INSTR_SIZE 6
504 static int
505 s390_readinstruction (bfd_byte instr[], CORE_ADDR at)
506 {
507 static int s390_instrlen[] = { 2, 4, 4, 6 };
508 int instrlen;
509
510 if (target_read_memory (at, &instr[0], 2))
511 return -1;
512 instrlen = s390_instrlen[instr[0] >> 6];
513 if (instrlen > 2)
514 {
515 if (target_read_memory (at + 2, &instr[2], instrlen - 2))
516 return -1;
517 }
518 return instrlen;
519 }
520
521
522 /* The functions below are for recognizing and decoding S/390
523 instructions of various formats. Each of them checks whether INSN
524 is an instruction of the given format, with the specified opcodes.
525 If it is, it sets the remaining arguments to the values of the
526 instruction's fields, and returns a non-zero value; otherwise, it
527 returns zero.
528
529 These functions' arguments appear in the order they appear in the
530 instruction, not in the machine-language form. So, opcodes always
531 come first, even though they're sometimes scattered around the
532 instructions. And displacements appear before base and extension
533 registers, as they do in the assembly syntax, not at the end, as
534 they do in the machine language. */
535 static int
536 is_ri (bfd_byte *insn, int op1, int op2, unsigned int *r1, int *i2)
537 {
538 if (insn[0] == op1 && (insn[1] & 0xf) == op2)
539 {
540 *r1 = (insn[1] >> 4) & 0xf;
541 /* i2 is a 16-bit signed quantity. */
542 *i2 = (((insn[2] << 8) | insn[3]) ^ 0x8000) - 0x8000;
543 return 1;
544 }
545 else
546 return 0;
547 }
548
549
550 static int
551 is_ril (bfd_byte *insn, int op1, int op2,
552 unsigned int *r1, int *i2)
553 {
554 if (insn[0] == op1 && (insn[1] & 0xf) == op2)
555 {
556 *r1 = (insn[1] >> 4) & 0xf;
557 /* i2 is a signed quantity. If the host 'int' is 32 bits long,
558 no sign extension is necessary, but we don't want to assume
559 that. */
560 *i2 = (((insn[2] << 24)
561 | (insn[3] << 16)
562 | (insn[4] << 8)
563 | (insn[5])) ^ 0x80000000) - 0x80000000;
564 return 1;
565 }
566 else
567 return 0;
568 }
569
570
571 static int
572 is_rr (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
573 {
574 if (insn[0] == op)
575 {
576 *r1 = (insn[1] >> 4) & 0xf;
577 *r2 = insn[1] & 0xf;
578 return 1;
579 }
580 else
581 return 0;
582 }
583
584
585 static int
586 is_rre (bfd_byte *insn, int op, unsigned int *r1, unsigned int *r2)
587 {
588 if (((insn[0] << 8) | insn[1]) == op)
589 {
590 /* Yes, insn[3]. insn[2] is unused in RRE format. */
591 *r1 = (insn[3] >> 4) & 0xf;
592 *r2 = insn[3] & 0xf;
593 return 1;
594 }
595 else
596 return 0;
597 }
598
599
600 static int
601 is_rs (bfd_byte *insn, int op,
602 unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
603 {
604 if (insn[0] == op)
605 {
606 *r1 = (insn[1] >> 4) & 0xf;
607 *r3 = insn[1] & 0xf;
608 *b2 = (insn[2] >> 4) & 0xf;
609 *d2 = ((insn[2] & 0xf) << 8) | insn[3];
610 return 1;
611 }
612 else
613 return 0;
614 }
615
616
617 static int
618 is_rsy (bfd_byte *insn, int op1, int op2,
619 unsigned int *r1, unsigned int *r3, unsigned int *d2, unsigned int *b2)
620 {
621 if (insn[0] == op1
622 && insn[5] == op2)
623 {
624 *r1 = (insn[1] >> 4) & 0xf;
625 *r3 = insn[1] & 0xf;
626 *b2 = (insn[2] >> 4) & 0xf;
627 /* The 'long displacement' is a 20-bit signed integer. */
628 *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
629 ^ 0x80000) - 0x80000;
630 return 1;
631 }
632 else
633 return 0;
634 }
635
636
637 static int
638 is_rx (bfd_byte *insn, int op,
639 unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
640 {
641 if (insn[0] == op)
642 {
643 *r1 = (insn[1] >> 4) & 0xf;
644 *x2 = insn[1] & 0xf;
645 *b2 = (insn[2] >> 4) & 0xf;
646 *d2 = ((insn[2] & 0xf) << 8) | insn[3];
647 return 1;
648 }
649 else
650 return 0;
651 }
652
653
654 static int
655 is_rxy (bfd_byte *insn, int op1, int op2,
656 unsigned int *r1, unsigned int *d2, unsigned int *x2, unsigned int *b2)
657 {
658 if (insn[0] == op1
659 && insn[5] == op2)
660 {
661 *r1 = (insn[1] >> 4) & 0xf;
662 *x2 = insn[1] & 0xf;
663 *b2 = (insn[2] >> 4) & 0xf;
664 /* The 'long displacement' is a 20-bit signed integer. */
665 *d2 = ((((insn[2] & 0xf) << 8) | insn[3] | (insn[4] << 12))
666 ^ 0x80000) - 0x80000;
667 return 1;
668 }
669 else
670 return 0;
671 }
672
673
674 /* Prologue analysis. */
675
676 #define S390_NUM_GPRS 16
677 #define S390_NUM_FPRS 16
678
679 struct s390_prologue_data {
680
681 /* The stack. */
682 struct pv_area *stack;
683
684 /* The size and byte-order of a GPR or FPR. */
685 int gpr_size;
686 int fpr_size;
687 enum bfd_endian byte_order;
688
689 /* The general-purpose registers. */
690 pv_t gpr[S390_NUM_GPRS];
691
692 /* The floating-point registers. */
693 pv_t fpr[S390_NUM_FPRS];
694
695 /* The offset relative to the CFA where the incoming GPR N was saved
696 by the function prologue. 0 if not saved or unknown. */
697 int gpr_slot[S390_NUM_GPRS];
698
699 /* Likewise for FPRs. */
700 int fpr_slot[S390_NUM_FPRS];
701
702 /* Nonzero if the backchain was saved. This is assumed to be the
703 case when the incoming SP is saved at the current SP location. */
704 int back_chain_saved_p;
705 };
706
707 /* Return the effective address for an X-style instruction, like:
708
709 L R1, D2(X2, B2)
710
711 Here, X2 and B2 are registers, and D2 is a signed 20-bit
712 constant; the effective address is the sum of all three. If either
713 X2 or B2 are zero, then it doesn't contribute to the sum --- this
714 means that r0 can't be used as either X2 or B2. */
715 static pv_t
716 s390_addr (struct s390_prologue_data *data,
717 int d2, unsigned int x2, unsigned int b2)
718 {
719 pv_t result;
720
721 result = pv_constant (d2);
722 if (x2)
723 result = pv_add (result, data->gpr[x2]);
724 if (b2)
725 result = pv_add (result, data->gpr[b2]);
726
727 return result;
728 }
729
730 /* Do a SIZE-byte store of VALUE to D2(X2,B2). */
731 static void
732 s390_store (struct s390_prologue_data *data,
733 int d2, unsigned int x2, unsigned int b2, CORE_ADDR size,
734 pv_t value)
735 {
736 pv_t addr = s390_addr (data, d2, x2, b2);
737 pv_t offset;
738
739 /* Check whether we are storing the backchain. */
740 offset = pv_subtract (data->gpr[S390_SP_REGNUM - S390_R0_REGNUM], addr);
741
742 if (pv_is_constant (offset) && offset.k == 0)
743 if (size == data->gpr_size
744 && pv_is_register_k (value, S390_SP_REGNUM, 0))
745 {
746 data->back_chain_saved_p = 1;
747 return;
748 }
749
750
751 /* Check whether we are storing a register into the stack. */
752 if (!pv_area_store_would_trash (data->stack, addr))
753 pv_area_store (data->stack, addr, size, value);
754
755
756 /* Note: If this is some store we cannot identify, you might think we
757 should forget our cached values, as any of those might have been hit.
758
759 However, we make the assumption that the register save areas are only
760 ever stored to once in any given function, and we do recognize these
761 stores. Thus every store we cannot recognize does not hit our data. */
762 }
763
764 /* Do a SIZE-byte load from D2(X2,B2). */
765 static pv_t
766 s390_load (struct s390_prologue_data *data,
767 int d2, unsigned int x2, unsigned int b2, CORE_ADDR size)
768
769 {
770 pv_t addr = s390_addr (data, d2, x2, b2);
771 pv_t offset;
772
773 /* If it's a load from an in-line constant pool, then we can
774 simulate that, under the assumption that the code isn't
775 going to change between the time the processor actually
776 executed it creating the current frame, and the time when
777 we're analyzing the code to unwind past that frame. */
778 if (pv_is_constant (addr))
779 {
780 struct target_section *secp;
781 secp = target_section_by_addr (&current_target, addr.k);
782 if (secp != NULL
783 && (bfd_get_section_flags (secp->bfd, secp->the_bfd_section)
784 & SEC_READONLY))
785 return pv_constant (read_memory_integer (addr.k, size,
786 data->byte_order));
787 }
788
789 /* Check whether we are accessing one of our save slots. */
790 return pv_area_fetch (data->stack, addr, size);
791 }
792
793 /* Function for finding saved registers in a 'struct pv_area'; we pass
794 this to pv_area_scan.
795
796 If VALUE is a saved register, ADDR says it was saved at a constant
797 offset from the frame base, and SIZE indicates that the whole
798 register was saved, record its offset in the reg_offset table in
799 PROLOGUE_UNTYPED. */
800 static void
801 s390_check_for_saved (void *data_untyped, pv_t addr, CORE_ADDR size, pv_t value)
802 {
803 struct s390_prologue_data *data = data_untyped;
804 int i, offset;
805
806 if (!pv_is_register (addr, S390_SP_REGNUM))
807 return;
808
809 offset = 16 * data->gpr_size + 32 - addr.k;
810
811 /* If we are storing the original value of a register, we want to
812 record the CFA offset. If the same register is stored multiple
813 times, the stack slot with the highest address counts. */
814
815 for (i = 0; i < S390_NUM_GPRS; i++)
816 if (size == data->gpr_size
817 && pv_is_register_k (value, S390_R0_REGNUM + i, 0))
818 if (data->gpr_slot[i] == 0
819 || data->gpr_slot[i] > offset)
820 {
821 data->gpr_slot[i] = offset;
822 return;
823 }
824
825 for (i = 0; i < S390_NUM_FPRS; i++)
826 if (size == data->fpr_size
827 && pv_is_register_k (value, S390_F0_REGNUM + i, 0))
828 if (data->fpr_slot[i] == 0
829 || data->fpr_slot[i] > offset)
830 {
831 data->fpr_slot[i] = offset;
832 return;
833 }
834 }
835
836 /* Analyze the prologue of the function starting at START_PC,
837 continuing at most until CURRENT_PC. Initialize DATA to
838 hold all information we find out about the state of the registers
839 and stack slots. Return the address of the instruction after
840 the last one that changed the SP, FP, or back chain; or zero
841 on error. */
842 static CORE_ADDR
843 s390_analyze_prologue (struct gdbarch *gdbarch,
844 CORE_ADDR start_pc,
845 CORE_ADDR current_pc,
846 struct s390_prologue_data *data)
847 {
848 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
849
850 /* Our return value:
851 The address of the instruction after the last one that changed
852 the SP, FP, or back chain; zero if we got an error trying to
853 read memory. */
854 CORE_ADDR result = start_pc;
855
856 /* The current PC for our abstract interpretation. */
857 CORE_ADDR pc;
858
859 /* The address of the next instruction after that. */
860 CORE_ADDR next_pc;
861
862 /* Set up everything's initial value. */
863 {
864 int i;
865
866 data->stack = make_pv_area (S390_SP_REGNUM, gdbarch_addr_bit (gdbarch));
867
868 /* For the purpose of prologue tracking, we consider the GPR size to
869 be equal to the ABI word size, even if it is actually larger
870 (i.e. when running a 32-bit binary under a 64-bit kernel). */
871 data->gpr_size = word_size;
872 data->fpr_size = 8;
873 data->byte_order = gdbarch_byte_order (gdbarch);
874
875 for (i = 0; i < S390_NUM_GPRS; i++)
876 data->gpr[i] = pv_register (S390_R0_REGNUM + i, 0);
877
878 for (i = 0; i < S390_NUM_FPRS; i++)
879 data->fpr[i] = pv_register (S390_F0_REGNUM + i, 0);
880
881 for (i = 0; i < S390_NUM_GPRS; i++)
882 data->gpr_slot[i] = 0;
883
884 for (i = 0; i < S390_NUM_FPRS; i++)
885 data->fpr_slot[i] = 0;
886
887 data->back_chain_saved_p = 0;
888 }
889
890 /* Start interpreting instructions, until we hit the frame's
891 current PC or the first branch instruction. */
892 for (pc = start_pc; pc > 0 && pc < current_pc; pc = next_pc)
893 {
894 bfd_byte insn[S390_MAX_INSTR_SIZE];
895 int insn_len = s390_readinstruction (insn, pc);
896
897 bfd_byte dummy[S390_MAX_INSTR_SIZE] = { 0 };
898 bfd_byte *insn32 = word_size == 4 ? insn : dummy;
899 bfd_byte *insn64 = word_size == 8 ? insn : dummy;
900
901 /* Fields for various kinds of instructions. */
902 unsigned int b2, r1, r2, x2, r3;
903 int i2, d2;
904
905 /* The values of SP and FP before this instruction,
906 for detecting instructions that change them. */
907 pv_t pre_insn_sp, pre_insn_fp;
908 /* Likewise for the flag whether the back chain was saved. */
909 int pre_insn_back_chain_saved_p;
910
911 /* If we got an error trying to read the instruction, report it. */
912 if (insn_len < 0)
913 {
914 result = 0;
915 break;
916 }
917
918 next_pc = pc + insn_len;
919
920 pre_insn_sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
921 pre_insn_fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
922 pre_insn_back_chain_saved_p = data->back_chain_saved_p;
923
924
925 /* LHI r1, i2 --- load halfword immediate. */
926 /* LGHI r1, i2 --- load halfword immediate (64-bit version). */
927 /* LGFI r1, i2 --- load fullword immediate. */
928 if (is_ri (insn32, op1_lhi, op2_lhi, &r1, &i2)
929 || is_ri (insn64, op1_lghi, op2_lghi, &r1, &i2)
930 || is_ril (insn, op1_lgfi, op2_lgfi, &r1, &i2))
931 data->gpr[r1] = pv_constant (i2);
932
933 /* LR r1, r2 --- load from register. */
934 /* LGR r1, r2 --- load from register (64-bit version). */
935 else if (is_rr (insn32, op_lr, &r1, &r2)
936 || is_rre (insn64, op_lgr, &r1, &r2))
937 data->gpr[r1] = data->gpr[r2];
938
939 /* L r1, d2(x2, b2) --- load. */
940 /* LY r1, d2(x2, b2) --- load (long-displacement version). */
941 /* LG r1, d2(x2, b2) --- load (64-bit version). */
942 else if (is_rx (insn32, op_l, &r1, &d2, &x2, &b2)
943 || is_rxy (insn32, op1_ly, op2_ly, &r1, &d2, &x2, &b2)
944 || is_rxy (insn64, op1_lg, op2_lg, &r1, &d2, &x2, &b2))
945 data->gpr[r1] = s390_load (data, d2, x2, b2, data->gpr_size);
946
947 /* ST r1, d2(x2, b2) --- store. */
948 /* STY r1, d2(x2, b2) --- store (long-displacement version). */
949 /* STG r1, d2(x2, b2) --- store (64-bit version). */
950 else if (is_rx (insn32, op_st, &r1, &d2, &x2, &b2)
951 || is_rxy (insn32, op1_sty, op2_sty, &r1, &d2, &x2, &b2)
952 || is_rxy (insn64, op1_stg, op2_stg, &r1, &d2, &x2, &b2))
953 s390_store (data, d2, x2, b2, data->gpr_size, data->gpr[r1]);
954
955 /* STD r1, d2(x2,b2) --- store floating-point register. */
956 else if (is_rx (insn, op_std, &r1, &d2, &x2, &b2))
957 s390_store (data, d2, x2, b2, data->fpr_size, data->fpr[r1]);
958
959 /* STM r1, r3, d2(b2) --- store multiple. */
960 /* STMY r1, r3, d2(b2) --- store multiple (long-displacement version). */
961 /* STMG r1, r3, d2(b2) --- store multiple (64-bit version). */
962 else if (is_rs (insn32, op_stm, &r1, &r3, &d2, &b2)
963 || is_rsy (insn32, op1_stmy, op2_stmy, &r1, &r3, &d2, &b2)
964 || is_rsy (insn64, op1_stmg, op2_stmg, &r1, &r3, &d2, &b2))
965 {
966 for (; r1 <= r3; r1++, d2 += data->gpr_size)
967 s390_store (data, d2, 0, b2, data->gpr_size, data->gpr[r1]);
968 }
969
970 /* AHI r1, i2 --- add halfword immediate. */
971 /* AGHI r1, i2 --- add halfword immediate (64-bit version). */
972 /* AFI r1, i2 --- add fullword immediate. */
973 /* AGFI r1, i2 --- add fullword immediate (64-bit version). */
974 else if (is_ri (insn32, op1_ahi, op2_ahi, &r1, &i2)
975 || is_ri (insn64, op1_aghi, op2_aghi, &r1, &i2)
976 || is_ril (insn32, op1_afi, op2_afi, &r1, &i2)
977 || is_ril (insn64, op1_agfi, op2_agfi, &r1, &i2))
978 data->gpr[r1] = pv_add_constant (data->gpr[r1], i2);
979
980 /* ALFI r1, i2 --- add logical immediate. */
981 /* ALGFI r1, i2 --- add logical immediate (64-bit version). */
982 else if (is_ril (insn32, op1_alfi, op2_alfi, &r1, &i2)
983 || is_ril (insn64, op1_algfi, op2_algfi, &r1, &i2))
984 data->gpr[r1] = pv_add_constant (data->gpr[r1],
985 (CORE_ADDR)i2 & 0xffffffff);
986
987 /* AR r1, r2 -- add register. */
988 /* AGR r1, r2 -- add register (64-bit version). */
989 else if (is_rr (insn32, op_ar, &r1, &r2)
990 || is_rre (insn64, op_agr, &r1, &r2))
991 data->gpr[r1] = pv_add (data->gpr[r1], data->gpr[r2]);
992
993 /* A r1, d2(x2, b2) -- add. */
994 /* AY r1, d2(x2, b2) -- add (long-displacement version). */
995 /* AG r1, d2(x2, b2) -- add (64-bit version). */
996 else if (is_rx (insn32, op_a, &r1, &d2, &x2, &b2)
997 || is_rxy (insn32, op1_ay, op2_ay, &r1, &d2, &x2, &b2)
998 || is_rxy (insn64, op1_ag, op2_ag, &r1, &d2, &x2, &b2))
999 data->gpr[r1] = pv_add (data->gpr[r1],
1000 s390_load (data, d2, x2, b2, data->gpr_size));
1001
1002 /* SLFI r1, i2 --- subtract logical immediate. */
1003 /* SLGFI r1, i2 --- subtract logical immediate (64-bit version). */
1004 else if (is_ril (insn32, op1_slfi, op2_slfi, &r1, &i2)
1005 || is_ril (insn64, op1_slgfi, op2_slgfi, &r1, &i2))
1006 data->gpr[r1] = pv_add_constant (data->gpr[r1],
1007 -((CORE_ADDR)i2 & 0xffffffff));
1008
1009 /* SR r1, r2 -- subtract register. */
1010 /* SGR r1, r2 -- subtract register (64-bit version). */
1011 else if (is_rr (insn32, op_sr, &r1, &r2)
1012 || is_rre (insn64, op_sgr, &r1, &r2))
1013 data->gpr[r1] = pv_subtract (data->gpr[r1], data->gpr[r2]);
1014
1015 /* S r1, d2(x2, b2) -- subtract. */
1016 /* SY r1, d2(x2, b2) -- subtract (long-displacement version). */
1017 /* SG r1, d2(x2, b2) -- subtract (64-bit version). */
1018 else if (is_rx (insn32, op_s, &r1, &d2, &x2, &b2)
1019 || is_rxy (insn32, op1_sy, op2_sy, &r1, &d2, &x2, &b2)
1020 || is_rxy (insn64, op1_sg, op2_sg, &r1, &d2, &x2, &b2))
1021 data->gpr[r1] = pv_subtract (data->gpr[r1],
1022 s390_load (data, d2, x2, b2, data->gpr_size));
1023
1024 /* LA r1, d2(x2, b2) --- load address. */
1025 /* LAY r1, d2(x2, b2) --- load address (long-displacement version). */
1026 else if (is_rx (insn, op_la, &r1, &d2, &x2, &b2)
1027 || is_rxy (insn, op1_lay, op2_lay, &r1, &d2, &x2, &b2))
1028 data->gpr[r1] = s390_addr (data, d2, x2, b2);
1029
1030 /* LARL r1, i2 --- load address relative long. */
1031 else if (is_ril (insn, op1_larl, op2_larl, &r1, &i2))
1032 data->gpr[r1] = pv_constant (pc + i2 * 2);
1033
1034 /* BASR r1, 0 --- branch and save.
1035 Since r2 is zero, this saves the PC in r1, but doesn't branch. */
1036 else if (is_rr (insn, op_basr, &r1, &r2)
1037 && r2 == 0)
1038 data->gpr[r1] = pv_constant (next_pc);
1039
1040 /* BRAS r1, i2 --- branch relative and save. */
1041 else if (is_ri (insn, op1_bras, op2_bras, &r1, &i2))
1042 {
1043 data->gpr[r1] = pv_constant (next_pc);
1044 next_pc = pc + i2 * 2;
1045
1046 /* We'd better not interpret any backward branches. We'll
1047 never terminate. */
1048 if (next_pc <= pc)
1049 break;
1050 }
1051
1052 /* Terminate search when hitting any other branch instruction. */
1053 else if (is_rr (insn, op_basr, &r1, &r2)
1054 || is_rx (insn, op_bas, &r1, &d2, &x2, &b2)
1055 || is_rr (insn, op_bcr, &r1, &r2)
1056 || is_rx (insn, op_bc, &r1, &d2, &x2, &b2)
1057 || is_ri (insn, op1_brc, op2_brc, &r1, &i2)
1058 || is_ril (insn, op1_brcl, op2_brcl, &r1, &i2)
1059 || is_ril (insn, op1_brasl, op2_brasl, &r2, &i2))
1060 break;
1061
1062 else
1063 /* An instruction we don't know how to simulate. The only
1064 safe thing to do would be to set every value we're tracking
1065 to 'unknown'. Instead, we'll be optimistic: we assume that
1066 we *can* interpret every instruction that the compiler uses
1067 to manipulate any of the data we're interested in here --
1068 then we can just ignore anything else. */
1069 ;
1070
1071 /* Record the address after the last instruction that changed
1072 the FP, SP, or backlink. Ignore instructions that changed
1073 them back to their original values --- those are probably
1074 restore instructions. (The back chain is never restored,
1075 just popped.) */
1076 {
1077 pv_t sp = data->gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1078 pv_t fp = data->gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
1079
1080 if ((! pv_is_identical (pre_insn_sp, sp)
1081 && ! pv_is_register_k (sp, S390_SP_REGNUM, 0)
1082 && sp.kind != pvk_unknown)
1083 || (! pv_is_identical (pre_insn_fp, fp)
1084 && ! pv_is_register_k (fp, S390_FRAME_REGNUM, 0)
1085 && fp.kind != pvk_unknown)
1086 || pre_insn_back_chain_saved_p != data->back_chain_saved_p)
1087 result = next_pc;
1088 }
1089 }
1090
1091 /* Record where all the registers were saved. */
1092 pv_area_scan (data->stack, s390_check_for_saved, data);
1093
1094 free_pv_area (data->stack);
1095 data->stack = NULL;
1096
1097 return result;
1098 }
1099
1100 /* Advance PC across any function entry prologue instructions to reach
1101 some "real" code. */
1102 static CORE_ADDR
1103 s390_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
1104 {
1105 struct s390_prologue_data data;
1106 CORE_ADDR skip_pc;
1107 skip_pc = s390_analyze_prologue (gdbarch, pc, (CORE_ADDR)-1, &data);
1108 return skip_pc ? skip_pc : pc;
1109 }
1110
1111 /* Return true if we are in the functin's epilogue, i.e. after the
1112 instruction that destroyed the function's stack frame. */
1113 static int
1114 s390_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
1115 {
1116 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1117
1118 /* In frameless functions, there's not frame to destroy and thus
1119 we don't care about the epilogue.
1120
1121 In functions with frame, the epilogue sequence is a pair of
1122 a LM-type instruction that restores (amongst others) the
1123 return register %r14 and the stack pointer %r15, followed
1124 by a branch 'br %r14' --or equivalent-- that effects the
1125 actual return.
1126
1127 In that situation, this function needs to return 'true' in
1128 exactly one case: when pc points to that branch instruction.
1129
1130 Thus we try to disassemble the one instructions immediately
1131 preceeding pc and check whether it is an LM-type instruction
1132 modifying the stack pointer.
1133
1134 Note that disassembling backwards is not reliable, so there
1135 is a slight chance of false positives here ... */
1136
1137 bfd_byte insn[6];
1138 unsigned int r1, r3, b2;
1139 int d2;
1140
1141 if (word_size == 4
1142 && !target_read_memory (pc - 4, insn, 4)
1143 && is_rs (insn, op_lm, &r1, &r3, &d2, &b2)
1144 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1145 return 1;
1146
1147 if (word_size == 4
1148 && !target_read_memory (pc - 6, insn, 6)
1149 && is_rsy (insn, op1_lmy, op2_lmy, &r1, &r3, &d2, &b2)
1150 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1151 return 1;
1152
1153 if (word_size == 8
1154 && !target_read_memory (pc - 6, insn, 6)
1155 && is_rsy (insn, op1_lmg, op2_lmg, &r1, &r3, &d2, &b2)
1156 && r3 == S390_SP_REGNUM - S390_R0_REGNUM)
1157 return 1;
1158
1159 return 0;
1160 }
1161
1162
1163 /* Normal stack frames. */
1164
1165 struct s390_unwind_cache {
1166
1167 CORE_ADDR func;
1168 CORE_ADDR frame_base;
1169 CORE_ADDR local_base;
1170
1171 struct trad_frame_saved_reg *saved_regs;
1172 };
1173
1174 static int
1175 s390_prologue_frame_unwind_cache (struct frame_info *this_frame,
1176 struct s390_unwind_cache *info)
1177 {
1178 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1179 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1180 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1181 struct s390_prologue_data data;
1182 pv_t *fp = &data.gpr[S390_FRAME_REGNUM - S390_R0_REGNUM];
1183 pv_t *sp = &data.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1184 int i;
1185 CORE_ADDR cfa;
1186 CORE_ADDR func;
1187 CORE_ADDR result;
1188 ULONGEST reg;
1189 CORE_ADDR prev_sp;
1190 int frame_pointer;
1191 int size;
1192 struct frame_info *next_frame;
1193
1194 /* Try to find the function start address. If we can't find it, we don't
1195 bother searching for it -- with modern compilers this would be mostly
1196 pointless anyway. Trust that we'll either have valid DWARF-2 CFI data
1197 or else a valid backchain ... */
1198 func = get_frame_func (this_frame);
1199 if (!func)
1200 return 0;
1201
1202 /* Try to analyze the prologue. */
1203 result = s390_analyze_prologue (gdbarch, func,
1204 get_frame_pc (this_frame), &data);
1205 if (!result)
1206 return 0;
1207
1208 /* If this was successful, we should have found the instruction that
1209 sets the stack pointer register to the previous value of the stack
1210 pointer minus the frame size. */
1211 if (!pv_is_register (*sp, S390_SP_REGNUM))
1212 return 0;
1213
1214 /* A frame size of zero at this point can mean either a real
1215 frameless function, or else a failure to find the prologue.
1216 Perform some sanity checks to verify we really have a
1217 frameless function. */
1218 if (sp->k == 0)
1219 {
1220 /* If the next frame is a NORMAL_FRAME, this frame *cannot* have frame
1221 size zero. This is only possible if the next frame is a sentinel
1222 frame, a dummy frame, or a signal trampoline frame. */
1223 /* FIXME: cagney/2004-05-01: This sanity check shouldn't be
1224 needed, instead the code should simpliy rely on its
1225 analysis. */
1226 next_frame = get_next_frame (this_frame);
1227 while (next_frame && get_frame_type (next_frame) == INLINE_FRAME)
1228 next_frame = get_next_frame (next_frame);
1229 if (next_frame
1230 && get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME)
1231 return 0;
1232
1233 /* If we really have a frameless function, %r14 must be valid
1234 -- in particular, it must point to a different function. */
1235 reg = get_frame_register_unsigned (this_frame, S390_RETADDR_REGNUM);
1236 reg = gdbarch_addr_bits_remove (gdbarch, reg) - 1;
1237 if (get_pc_function_start (reg) == func)
1238 {
1239 /* However, there is one case where it *is* valid for %r14
1240 to point to the same function -- if this is a recursive
1241 call, and we have stopped in the prologue *before* the
1242 stack frame was allocated.
1243
1244 Recognize this case by looking ahead a bit ... */
1245
1246 struct s390_prologue_data data2;
1247 pv_t *sp = &data2.gpr[S390_SP_REGNUM - S390_R0_REGNUM];
1248
1249 if (!(s390_analyze_prologue (gdbarch, func, (CORE_ADDR)-1, &data2)
1250 && pv_is_register (*sp, S390_SP_REGNUM)
1251 && sp->k != 0))
1252 return 0;
1253 }
1254 }
1255
1256
1257 /* OK, we've found valid prologue data. */
1258 size = -sp->k;
1259
1260 /* If the frame pointer originally also holds the same value
1261 as the stack pointer, we're probably using it. If it holds
1262 some other value -- even a constant offset -- it is most
1263 likely used as temp register. */
1264 if (pv_is_identical (*sp, *fp))
1265 frame_pointer = S390_FRAME_REGNUM;
1266 else
1267 frame_pointer = S390_SP_REGNUM;
1268
1269 /* If we've detected a function with stack frame, we'll still have to
1270 treat it as frameless if we're currently within the function epilog
1271 code at a point where the frame pointer has already been restored.
1272 This can only happen in an innermost frame. */
1273 /* FIXME: cagney/2004-05-01: This sanity check shouldn't be needed,
1274 instead the code should simpliy rely on its analysis. */
1275 next_frame = get_next_frame (this_frame);
1276 while (next_frame && get_frame_type (next_frame) == INLINE_FRAME)
1277 next_frame = get_next_frame (next_frame);
1278 if (size > 0
1279 && (next_frame == NULL
1280 || get_frame_type (get_next_frame (this_frame)) != NORMAL_FRAME))
1281 {
1282 /* See the comment in s390_in_function_epilogue_p on why this is
1283 not completely reliable ... */
1284 if (s390_in_function_epilogue_p (gdbarch, get_frame_pc (this_frame)))
1285 {
1286 memset (&data, 0, sizeof (data));
1287 size = 0;
1288 frame_pointer = S390_SP_REGNUM;
1289 }
1290 }
1291
1292 /* Once we know the frame register and the frame size, we can unwind
1293 the current value of the frame register from the next frame, and
1294 add back the frame size to arrive that the previous frame's
1295 stack pointer value. */
1296 prev_sp = get_frame_register_unsigned (this_frame, frame_pointer) + size;
1297 cfa = prev_sp + 16*word_size + 32;
1298
1299 /* Record the addresses of all register spill slots the prologue parser
1300 has recognized. Consider only registers defined as call-saved by the
1301 ABI; for call-clobbered registers the parser may have recognized
1302 spurious stores. */
1303
1304 for (i = 6; i <= 15; i++)
1305 if (data.gpr_slot[i] != 0)
1306 info->saved_regs[S390_R0_REGNUM + i].addr = cfa - data.gpr_slot[i];
1307
1308 switch (tdep->abi)
1309 {
1310 case ABI_LINUX_S390:
1311 if (data.fpr_slot[4] != 0)
1312 info->saved_regs[S390_F4_REGNUM].addr = cfa - data.fpr_slot[4];
1313 if (data.fpr_slot[6] != 0)
1314 info->saved_regs[S390_F6_REGNUM].addr = cfa - data.fpr_slot[6];
1315 break;
1316
1317 case ABI_LINUX_ZSERIES:
1318 for (i = 8; i <= 15; i++)
1319 if (data.fpr_slot[i] != 0)
1320 info->saved_regs[S390_F0_REGNUM + i].addr = cfa - data.fpr_slot[i];
1321 break;
1322 }
1323
1324 /* Function return will set PC to %r14. */
1325 info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM];
1326
1327 /* In frameless functions, we unwind simply by moving the return
1328 address to the PC. However, if we actually stored to the
1329 save area, use that -- we might only think the function frameless
1330 because we're in the middle of the prologue ... */
1331 if (size == 0
1332 && !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM))
1333 {
1334 info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM;
1335 }
1336
1337 /* Another sanity check: unless this is a frameless function,
1338 we should have found spill slots for SP and PC.
1339 If not, we cannot unwind further -- this happens e.g. in
1340 libc's thread_start routine. */
1341 if (size > 0)
1342 {
1343 if (!trad_frame_addr_p (info->saved_regs, S390_SP_REGNUM)
1344 || !trad_frame_addr_p (info->saved_regs, S390_PC_REGNUM))
1345 prev_sp = -1;
1346 }
1347
1348 /* We use the current value of the frame register as local_base,
1349 and the top of the register save area as frame_base. */
1350 if (prev_sp != -1)
1351 {
1352 info->frame_base = prev_sp + 16*word_size + 32;
1353 info->local_base = prev_sp - size;
1354 }
1355
1356 info->func = func;
1357 return 1;
1358 }
1359
1360 static void
1361 s390_backchain_frame_unwind_cache (struct frame_info *this_frame,
1362 struct s390_unwind_cache *info)
1363 {
1364 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1365 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1366 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1367 CORE_ADDR backchain;
1368 ULONGEST reg;
1369 LONGEST sp;
1370
1371 /* Get the backchain. */
1372 reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1373 backchain = read_memory_unsigned_integer (reg, word_size, byte_order);
1374
1375 /* A zero backchain terminates the frame chain. As additional
1376 sanity check, let's verify that the spill slot for SP in the
1377 save area pointed to by the backchain in fact links back to
1378 the save area. */
1379 if (backchain != 0
1380 && safe_read_memory_integer (backchain + 15*word_size,
1381 word_size, byte_order, &sp)
1382 && (CORE_ADDR)sp == backchain)
1383 {
1384 /* We don't know which registers were saved, but it will have
1385 to be at least %r14 and %r15. This will allow us to continue
1386 unwinding, but other prev-frame registers may be incorrect ... */
1387 info->saved_regs[S390_SP_REGNUM].addr = backchain + 15*word_size;
1388 info->saved_regs[S390_RETADDR_REGNUM].addr = backchain + 14*word_size;
1389
1390 /* Function return will set PC to %r14. */
1391 info->saved_regs[S390_PC_REGNUM] = info->saved_regs[S390_RETADDR_REGNUM];
1392
1393 /* We use the current value of the frame register as local_base,
1394 and the top of the register save area as frame_base. */
1395 info->frame_base = backchain + 16*word_size + 32;
1396 info->local_base = reg;
1397 }
1398
1399 info->func = get_frame_pc (this_frame);
1400 }
1401
1402 static struct s390_unwind_cache *
1403 s390_frame_unwind_cache (struct frame_info *this_frame,
1404 void **this_prologue_cache)
1405 {
1406 struct s390_unwind_cache *info;
1407 if (*this_prologue_cache)
1408 return *this_prologue_cache;
1409
1410 info = FRAME_OBSTACK_ZALLOC (struct s390_unwind_cache);
1411 *this_prologue_cache = info;
1412 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1413 info->func = -1;
1414 info->frame_base = -1;
1415 info->local_base = -1;
1416
1417 /* Try to use prologue analysis to fill the unwind cache.
1418 If this fails, fall back to reading the stack backchain. */
1419 if (!s390_prologue_frame_unwind_cache (this_frame, info))
1420 s390_backchain_frame_unwind_cache (this_frame, info);
1421
1422 return info;
1423 }
1424
1425 static void
1426 s390_frame_this_id (struct frame_info *this_frame,
1427 void **this_prologue_cache,
1428 struct frame_id *this_id)
1429 {
1430 struct s390_unwind_cache *info
1431 = s390_frame_unwind_cache (this_frame, this_prologue_cache);
1432
1433 if (info->frame_base == -1)
1434 return;
1435
1436 *this_id = frame_id_build (info->frame_base, info->func);
1437 }
1438
1439 static struct value *
1440 s390_frame_prev_register (struct frame_info *this_frame,
1441 void **this_prologue_cache, int regnum)
1442 {
1443 struct s390_unwind_cache *info
1444 = s390_frame_unwind_cache (this_frame, this_prologue_cache);
1445 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1446 }
1447
1448 static const struct frame_unwind s390_frame_unwind = {
1449 NORMAL_FRAME,
1450 s390_frame_this_id,
1451 s390_frame_prev_register,
1452 NULL,
1453 default_frame_sniffer
1454 };
1455
1456
1457 /* Code stubs and their stack frames. For things like PLTs and NULL
1458 function calls (where there is no true frame and the return address
1459 is in the RETADDR register). */
1460
1461 struct s390_stub_unwind_cache
1462 {
1463 CORE_ADDR frame_base;
1464 struct trad_frame_saved_reg *saved_regs;
1465 };
1466
1467 static struct s390_stub_unwind_cache *
1468 s390_stub_frame_unwind_cache (struct frame_info *this_frame,
1469 void **this_prologue_cache)
1470 {
1471 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1472 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1473 struct s390_stub_unwind_cache *info;
1474 ULONGEST reg;
1475
1476 if (*this_prologue_cache)
1477 return *this_prologue_cache;
1478
1479 info = FRAME_OBSTACK_ZALLOC (struct s390_stub_unwind_cache);
1480 *this_prologue_cache = info;
1481 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1482
1483 /* The return address is in register %r14. */
1484 info->saved_regs[S390_PC_REGNUM].realreg = S390_RETADDR_REGNUM;
1485
1486 /* Retrieve stack pointer and determine our frame base. */
1487 reg = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1488 info->frame_base = reg + 16*word_size + 32;
1489
1490 return info;
1491 }
1492
1493 static void
1494 s390_stub_frame_this_id (struct frame_info *this_frame,
1495 void **this_prologue_cache,
1496 struct frame_id *this_id)
1497 {
1498 struct s390_stub_unwind_cache *info
1499 = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
1500 *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
1501 }
1502
1503 static struct value *
1504 s390_stub_frame_prev_register (struct frame_info *this_frame,
1505 void **this_prologue_cache, int regnum)
1506 {
1507 struct s390_stub_unwind_cache *info
1508 = s390_stub_frame_unwind_cache (this_frame, this_prologue_cache);
1509 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1510 }
1511
1512 static int
1513 s390_stub_frame_sniffer (const struct frame_unwind *self,
1514 struct frame_info *this_frame,
1515 void **this_prologue_cache)
1516 {
1517 CORE_ADDR addr_in_block;
1518 bfd_byte insn[S390_MAX_INSTR_SIZE];
1519
1520 /* If the current PC points to non-readable memory, we assume we
1521 have trapped due to an invalid function pointer call. We handle
1522 the non-existing current function like a PLT stub. */
1523 addr_in_block = get_frame_address_in_block (this_frame);
1524 if (in_plt_section (addr_in_block, NULL)
1525 || s390_readinstruction (insn, get_frame_pc (this_frame)) < 0)
1526 return 1;
1527 return 0;
1528 }
1529
1530 static const struct frame_unwind s390_stub_frame_unwind = {
1531 NORMAL_FRAME,
1532 s390_stub_frame_this_id,
1533 s390_stub_frame_prev_register,
1534 NULL,
1535 s390_stub_frame_sniffer
1536 };
1537
1538
1539 /* Signal trampoline stack frames. */
1540
1541 struct s390_sigtramp_unwind_cache {
1542 CORE_ADDR frame_base;
1543 struct trad_frame_saved_reg *saved_regs;
1544 };
1545
1546 static struct s390_sigtramp_unwind_cache *
1547 s390_sigtramp_frame_unwind_cache (struct frame_info *this_frame,
1548 void **this_prologue_cache)
1549 {
1550 struct gdbarch *gdbarch = get_frame_arch (this_frame);
1551 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
1552 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1553 struct s390_sigtramp_unwind_cache *info;
1554 ULONGEST this_sp, prev_sp;
1555 CORE_ADDR next_ra, next_cfa, sigreg_ptr;
1556 int i;
1557
1558 if (*this_prologue_cache)
1559 return *this_prologue_cache;
1560
1561 info = FRAME_OBSTACK_ZALLOC (struct s390_sigtramp_unwind_cache);
1562 *this_prologue_cache = info;
1563 info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
1564
1565 this_sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
1566 next_ra = get_frame_pc (this_frame);
1567 next_cfa = this_sp + 16*word_size + 32;
1568
1569 /* New-style RT frame:
1570 retcode + alignment (8 bytes)
1571 siginfo (128 bytes)
1572 ucontext (contains sigregs at offset 5 words) */
1573 if (next_ra == next_cfa)
1574 {
1575 sigreg_ptr = next_cfa + 8 + 128 + align_up (5*word_size, 8);
1576 }
1577
1578 /* Old-style RT frame and all non-RT frames:
1579 old signal mask (8 bytes)
1580 pointer to sigregs */
1581 else
1582 {
1583 sigreg_ptr = read_memory_unsigned_integer (next_cfa + 8,
1584 word_size, byte_order);
1585 }
1586
1587 /* The sigregs structure looks like this:
1588 long psw_mask;
1589 long psw_addr;
1590 long gprs[16];
1591 int acrs[16];
1592 int fpc;
1593 int __pad;
1594 double fprs[16]; */
1595
1596 /* Let's ignore the PSW mask, it will not be restored anyway. */
1597 sigreg_ptr += word_size;
1598
1599 /* Next comes the PSW address. */
1600 info->saved_regs[S390_PC_REGNUM].addr = sigreg_ptr;
1601 sigreg_ptr += word_size;
1602
1603 /* Then the GPRs. */
1604 for (i = 0; i < 16; i++)
1605 {
1606 info->saved_regs[S390_R0_REGNUM + i].addr = sigreg_ptr;
1607 sigreg_ptr += word_size;
1608 }
1609
1610 /* Then the ACRs. */
1611 for (i = 0; i < 16; i++)
1612 {
1613 info->saved_regs[S390_A0_REGNUM + i].addr = sigreg_ptr;
1614 sigreg_ptr += 4;
1615 }
1616
1617 /* The floating-point control word. */
1618 info->saved_regs[S390_FPC_REGNUM].addr = sigreg_ptr;
1619 sigreg_ptr += 8;
1620
1621 /* And finally the FPRs. */
1622 for (i = 0; i < 16; i++)
1623 {
1624 info->saved_regs[S390_F0_REGNUM + i].addr = sigreg_ptr;
1625 sigreg_ptr += 8;
1626 }
1627
1628 /* Restore the previous frame's SP. */
1629 prev_sp = read_memory_unsigned_integer (
1630 info->saved_regs[S390_SP_REGNUM].addr,
1631 word_size, byte_order);
1632
1633 /* Determine our frame base. */
1634 info->frame_base = prev_sp + 16*word_size + 32;
1635
1636 return info;
1637 }
1638
1639 static void
1640 s390_sigtramp_frame_this_id (struct frame_info *this_frame,
1641 void **this_prologue_cache,
1642 struct frame_id *this_id)
1643 {
1644 struct s390_sigtramp_unwind_cache *info
1645 = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
1646 *this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
1647 }
1648
1649 static struct value *
1650 s390_sigtramp_frame_prev_register (struct frame_info *this_frame,
1651 void **this_prologue_cache, int regnum)
1652 {
1653 struct s390_sigtramp_unwind_cache *info
1654 = s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
1655 return trad_frame_get_prev_register (this_frame, info->saved_regs, regnum);
1656 }
1657
1658 static int
1659 s390_sigtramp_frame_sniffer (const struct frame_unwind *self,
1660 struct frame_info *this_frame,
1661 void **this_prologue_cache)
1662 {
1663 CORE_ADDR pc = get_frame_pc (this_frame);
1664 bfd_byte sigreturn[2];
1665
1666 if (target_read_memory (pc, sigreturn, 2))
1667 return 0;
1668
1669 if (sigreturn[0] != 0x0a /* svc */)
1670 return 0;
1671
1672 if (sigreturn[1] != 119 /* sigreturn */
1673 && sigreturn[1] != 173 /* rt_sigreturn */)
1674 return 0;
1675
1676 return 1;
1677 }
1678
1679 static const struct frame_unwind s390_sigtramp_frame_unwind = {
1680 SIGTRAMP_FRAME,
1681 s390_sigtramp_frame_this_id,
1682 s390_sigtramp_frame_prev_register,
1683 NULL,
1684 s390_sigtramp_frame_sniffer
1685 };
1686
1687
1688 /* Frame base handling. */
1689
1690 static CORE_ADDR
1691 s390_frame_base_address (struct frame_info *this_frame, void **this_cache)
1692 {
1693 struct s390_unwind_cache *info
1694 = s390_frame_unwind_cache (this_frame, this_cache);
1695 return info->frame_base;
1696 }
1697
1698 static CORE_ADDR
1699 s390_local_base_address (struct frame_info *this_frame, void **this_cache)
1700 {
1701 struct s390_unwind_cache *info
1702 = s390_frame_unwind_cache (this_frame, this_cache);
1703 return info->local_base;
1704 }
1705
1706 static const struct frame_base s390_frame_base = {
1707 &s390_frame_unwind,
1708 s390_frame_base_address,
1709 s390_local_base_address,
1710 s390_local_base_address
1711 };
1712
1713 static CORE_ADDR
1714 s390_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
1715 {
1716 ULONGEST pc;
1717 pc = frame_unwind_register_unsigned (next_frame, S390_PC_REGNUM);
1718 return gdbarch_addr_bits_remove (gdbarch, pc);
1719 }
1720
1721 static CORE_ADDR
1722 s390_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
1723 {
1724 ULONGEST sp;
1725 sp = frame_unwind_register_unsigned (next_frame, S390_SP_REGNUM);
1726 return gdbarch_addr_bits_remove (gdbarch, sp);
1727 }
1728
1729
1730 /* DWARF-2 frame support. */
1731
1732 static void
1733 s390_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
1734 struct dwarf2_frame_state_reg *reg,
1735 struct frame_info *this_frame)
1736 {
1737 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1738
1739 switch (tdep->abi)
1740 {
1741 case ABI_LINUX_S390:
1742 /* Call-saved registers. */
1743 if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
1744 || regnum == S390_F4_REGNUM
1745 || regnum == S390_F6_REGNUM)
1746 reg->how = DWARF2_FRAME_REG_SAME_VALUE;
1747
1748 /* Call-clobbered registers. */
1749 else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM)
1750 || (regnum >= S390_F0_REGNUM && regnum <= S390_F15_REGNUM
1751 && regnum != S390_F4_REGNUM && regnum != S390_F6_REGNUM))
1752 reg->how = DWARF2_FRAME_REG_UNDEFINED;
1753
1754 /* The return address column. */
1755 else if (regnum == S390_PC_REGNUM)
1756 reg->how = DWARF2_FRAME_REG_RA;
1757 break;
1758
1759 case ABI_LINUX_ZSERIES:
1760 /* Call-saved registers. */
1761 if ((regnum >= S390_R6_REGNUM && regnum <= S390_R15_REGNUM)
1762 || (regnum >= S390_F8_REGNUM && regnum <= S390_F15_REGNUM))
1763 reg->how = DWARF2_FRAME_REG_SAME_VALUE;
1764
1765 /* Call-clobbered registers. */
1766 else if ((regnum >= S390_R0_REGNUM && regnum <= S390_R5_REGNUM)
1767 || (regnum >= S390_F0_REGNUM && regnum <= S390_F7_REGNUM))
1768 reg->how = DWARF2_FRAME_REG_UNDEFINED;
1769
1770 /* The return address column. */
1771 else if (regnum == S390_PC_REGNUM)
1772 reg->how = DWARF2_FRAME_REG_RA;
1773 break;
1774 }
1775 }
1776
1777
1778 /* Dummy function calls. */
1779
1780 /* Return non-zero if TYPE is an integer-like type, zero otherwise.
1781 "Integer-like" types are those that should be passed the way
1782 integers are: integers, enums, ranges, characters, and booleans. */
1783 static int
1784 is_integer_like (struct type *type)
1785 {
1786 enum type_code code = TYPE_CODE (type);
1787
1788 return (code == TYPE_CODE_INT
1789 || code == TYPE_CODE_ENUM
1790 || code == TYPE_CODE_RANGE
1791 || code == TYPE_CODE_CHAR
1792 || code == TYPE_CODE_BOOL);
1793 }
1794
1795 /* Return non-zero if TYPE is a pointer-like type, zero otherwise.
1796 "Pointer-like" types are those that should be passed the way
1797 pointers are: pointers and references. */
1798 static int
1799 is_pointer_like (struct type *type)
1800 {
1801 enum type_code code = TYPE_CODE (type);
1802
1803 return (code == TYPE_CODE_PTR
1804 || code == TYPE_CODE_REF);
1805 }
1806
1807
1808 /* Return non-zero if TYPE is a `float singleton' or `double
1809 singleton', zero otherwise.
1810
1811 A `T singleton' is a struct type with one member, whose type is
1812 either T or a `T singleton'. So, the following are all float
1813 singletons:
1814
1815 struct { float x };
1816 struct { struct { float x; } x; };
1817 struct { struct { struct { float x; } x; } x; };
1818
1819 ... and so on.
1820
1821 All such structures are passed as if they were floats or doubles,
1822 as the (revised) ABI says. */
1823 static int
1824 is_float_singleton (struct type *type)
1825 {
1826 if (TYPE_CODE (type) == TYPE_CODE_STRUCT && TYPE_NFIELDS (type) == 1)
1827 {
1828 struct type *singleton_type = TYPE_FIELD_TYPE (type, 0);
1829 CHECK_TYPEDEF (singleton_type);
1830
1831 return (TYPE_CODE (singleton_type) == TYPE_CODE_FLT
1832 || TYPE_CODE (singleton_type) == TYPE_CODE_DECFLOAT
1833 || is_float_singleton (singleton_type));
1834 }
1835
1836 return 0;
1837 }
1838
1839
1840 /* Return non-zero if TYPE is a struct-like type, zero otherwise.
1841 "Struct-like" types are those that should be passed as structs are:
1842 structs and unions.
1843
1844 As an odd quirk, not mentioned in the ABI, GCC passes float and
1845 double singletons as if they were a plain float, double, etc. (The
1846 corresponding union types are handled normally.) So we exclude
1847 those types here. *shrug* */
1848 static int
1849 is_struct_like (struct type *type)
1850 {
1851 enum type_code code = TYPE_CODE (type);
1852
1853 return (code == TYPE_CODE_UNION
1854 || (code == TYPE_CODE_STRUCT && ! is_float_singleton (type)));
1855 }
1856
1857
1858 /* Return non-zero if TYPE is a float-like type, zero otherwise.
1859 "Float-like" types are those that should be passed as
1860 floating-point values are.
1861
1862 You'd think this would just be floats, doubles, long doubles, etc.
1863 But as an odd quirk, not mentioned in the ABI, GCC passes float and
1864 double singletons as if they were a plain float, double, etc. (The
1865 corresponding union types are handled normally.) So we include
1866 those types here. *shrug* */
1867 static int
1868 is_float_like (struct type *type)
1869 {
1870 return (TYPE_CODE (type) == TYPE_CODE_FLT
1871 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT
1872 || is_float_singleton (type));
1873 }
1874
1875
1876 static int
1877 is_power_of_two (unsigned int n)
1878 {
1879 return ((n & (n - 1)) == 0);
1880 }
1881
1882 /* Return non-zero if TYPE should be passed as a pointer to a copy,
1883 zero otherwise. */
1884 static int
1885 s390_function_arg_pass_by_reference (struct type *type)
1886 {
1887 unsigned length = TYPE_LENGTH (type);
1888 if (length > 8)
1889 return 1;
1890
1891 /* FIXME: All complex and vector types are also returned by reference. */
1892 return is_struct_like (type) && !is_power_of_two (length);
1893 }
1894
1895 /* Return non-zero if TYPE should be passed in a float register
1896 if possible. */
1897 static int
1898 s390_function_arg_float (struct type *type)
1899 {
1900 unsigned length = TYPE_LENGTH (type);
1901 if (length > 8)
1902 return 0;
1903
1904 return is_float_like (type);
1905 }
1906
1907 /* Return non-zero if TYPE should be passed in an integer register
1908 (or a pair of integer registers) if possible. */
1909 static int
1910 s390_function_arg_integer (struct type *type)
1911 {
1912 unsigned length = TYPE_LENGTH (type);
1913 if (length > 8)
1914 return 0;
1915
1916 return is_integer_like (type)
1917 || is_pointer_like (type)
1918 || (is_struct_like (type) && is_power_of_two (length));
1919 }
1920
1921 /* Return ARG, a `SIMPLE_ARG', sign-extended or zero-extended to a full
1922 word as required for the ABI. */
1923 static LONGEST
1924 extend_simple_arg (struct gdbarch *gdbarch, struct value *arg)
1925 {
1926 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
1927 struct type *type = value_type (arg);
1928
1929 /* Even structs get passed in the least significant bits of the
1930 register / memory word. It's not really right to extract them as
1931 an integer, but it does take care of the extension. */
1932 if (TYPE_UNSIGNED (type))
1933 return extract_unsigned_integer (value_contents (arg),
1934 TYPE_LENGTH (type), byte_order);
1935 else
1936 return extract_signed_integer (value_contents (arg),
1937 TYPE_LENGTH (type), byte_order);
1938 }
1939
1940
1941 /* Return the alignment required by TYPE. */
1942 static int
1943 alignment_of (struct type *type)
1944 {
1945 int alignment;
1946
1947 if (is_integer_like (type)
1948 || is_pointer_like (type)
1949 || TYPE_CODE (type) == TYPE_CODE_FLT
1950 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
1951 alignment = TYPE_LENGTH (type);
1952 else if (TYPE_CODE (type) == TYPE_CODE_STRUCT
1953 || TYPE_CODE (type) == TYPE_CODE_UNION)
1954 {
1955 int i;
1956
1957 alignment = 1;
1958 for (i = 0; i < TYPE_NFIELDS (type); i++)
1959 {
1960 int field_alignment = alignment_of (TYPE_FIELD_TYPE (type, i));
1961
1962 if (field_alignment > alignment)
1963 alignment = field_alignment;
1964 }
1965 }
1966 else
1967 alignment = 1;
1968
1969 /* Check that everything we ever return is a power of two. Lots of
1970 code doesn't want to deal with aligning things to arbitrary
1971 boundaries. */
1972 gdb_assert ((alignment & (alignment - 1)) == 0);
1973
1974 return alignment;
1975 }
1976
1977
1978 /* Put the actual parameter values pointed to by ARGS[0..NARGS-1] in
1979 place to be passed to a function, as specified by the "GNU/Linux
1980 for S/390 ELF Application Binary Interface Supplement".
1981
1982 SP is the current stack pointer. We must put arguments, links,
1983 padding, etc. whereever they belong, and return the new stack
1984 pointer value.
1985
1986 If STRUCT_RETURN is non-zero, then the function we're calling is
1987 going to return a structure by value; STRUCT_ADDR is the address of
1988 a block we've allocated for it on the stack.
1989
1990 Our caller has taken care of any type promotions needed to satisfy
1991 prototypes or the old K&R argument-passing rules. */
1992 static CORE_ADDR
1993 s390_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
1994 struct regcache *regcache, CORE_ADDR bp_addr,
1995 int nargs, struct value **args, CORE_ADDR sp,
1996 int struct_return, CORE_ADDR struct_addr)
1997 {
1998 struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
1999 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
2000 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
2001 ULONGEST orig_sp;
2002 int i;
2003
2004 /* If the i'th argument is passed as a reference to a copy, then
2005 copy_addr[i] is the address of the copy we made. */
2006 CORE_ADDR *copy_addr = alloca (nargs * sizeof (CORE_ADDR));
2007
2008 /* Build the reference-to-copy area. */
2009 for (i = 0; i < nargs; i++)
2010 {
2011 struct value *arg = args[i];
2012 struct type *type = value_type (arg);
2013 unsigned length = TYPE_LENGTH (type);
2014
2015 if (s390_function_arg_pass_by_reference (type))
2016 {
2017 sp -= length;
2018 sp = align_down (sp, alignment_of (type));
2019 write_memory (sp, value_contents (arg), length);
2020 copy_addr[i] = sp;
2021 }
2022 }
2023
2024 /* Reserve space for the parameter area. As a conservative
2025 simplification, we assume that everything will be passed on the
2026 stack. Since every argument larger than 8 bytes will be
2027 passed by reference, we use this simple upper bound. */
2028 sp -= nargs * 8;
2029
2030 /* After all that, make sure it's still aligned on an eight-byte
2031 boundary. */
2032 sp = align_down (sp, 8);
2033
2034 /* Finally, place the actual parameters, working from SP towards
2035 higher addresses. The code above is supposed to reserve enough
2036 space for this. */
2037 {
2038 int fr = 0;
2039 int gr = 2;
2040 CORE_ADDR starg = sp;
2041
2042 /* A struct is returned using general register 2. */
2043 if (struct_return)
2044 {
2045 regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
2046 struct_addr);
2047 gr++;
2048 }
2049
2050 for (i = 0; i < nargs; i++)
2051 {
2052 struct value *arg = args[i];
2053 struct type *type = value_type (arg);
2054 unsigned length = TYPE_LENGTH (type);
2055
2056 if (s390_function_arg_pass_by_reference (type))
2057 {
2058 if (gr <= 6)
2059 {
2060 regcache_cooked_write_unsigned (regcache, S390_R0_REGNUM + gr,
2061 copy_addr[i]);
2062 gr++;
2063 }
2064 else
2065 {
2066 write_memory_unsigned_integer (starg, word_size, byte_order,
2067 copy_addr[i]);
2068 starg += word_size;
2069 }
2070 }
2071 else if (s390_function_arg_float (type))
2072 {
2073 /* The GNU/Linux for S/390 ABI uses FPRs 0 and 2 to pass arguments,
2074 the GNU/Linux for zSeries ABI uses 0, 2, 4, and 6. */
2075 if (fr <= (tdep->abi == ABI_LINUX_S390 ? 2 : 6))
2076 {
2077 /* When we store a single-precision value in an FP register,
2078 it occupies the leftmost bits. */
2079 regcache_cooked_write_part (regcache, S390_F0_REGNUM + fr,
2080 0, length, value_contents (arg));
2081 fr += 2;
2082 }
2083 else
2084 {
2085 /* When we store a single-precision value in a stack slot,
2086 it occupies the rightmost bits. */
2087 starg = align_up (starg + length, word_size);
2088 write_memory (starg - length, value_contents (arg), length);
2089 }
2090 }
2091 else if (s390_function_arg_integer (type) && length <= word_size)
2092 {
2093 if (gr <= 6)
2094 {
2095 /* Integer arguments are always extended to word size. */
2096 regcache_cooked_write_signed (regcache, S390_R0_REGNUM + gr,
2097 extend_simple_arg (gdbarch, arg));
2098 gr++;
2099 }
2100 else
2101 {
2102 /* Integer arguments are always extended to word size. */
2103 write_memory_signed_integer (starg, word_size, byte_order,
2104 extend_simple_arg (gdbarch, arg));
2105 starg += word_size;
2106 }
2107 }
2108 else if (s390_function_arg_integer (type) && length == 2*word_size)
2109 {
2110 if (gr <= 5)
2111 {
2112 regcache_cooked_write (regcache, S390_R0_REGNUM + gr,
2113 value_contents (arg));
2114 regcache_cooked_write (regcache, S390_R0_REGNUM + gr + 1,
2115 value_contents (arg) + word_size);
2116 gr += 2;
2117 }
2118 else
2119 {
2120 /* If we skipped r6 because we couldn't fit a DOUBLE_ARG
2121 in it, then don't go back and use it again later. */
2122 gr = 7;
2123
2124 write_memory (starg, value_contents (arg), length);
2125 starg += length;
2126 }
2127 }
2128 else
2129 internal_error (__FILE__, __LINE__, _("unknown argument type"));
2130 }
2131 }
2132
2133 /* Allocate the standard frame areas: the register save area, the
2134 word reserved for the compiler (which seems kind of meaningless),
2135 and the back chain pointer. */
2136 sp -= 16*word_size + 32;
2137
2138 /* Store return address. */
2139 regcache_cooked_write_unsigned (regcache, S390_RETADDR_REGNUM, bp_addr);
2140
2141 /* Store updated stack pointer. */
2142 regcache_cooked_write_unsigned (regcache, S390_SP_REGNUM, sp);
2143
2144 /* We need to return the 'stack part' of the frame ID,
2145 which is actually the top of the register save area. */
2146 return sp + 16*word_size + 32;
2147 }
2148
2149 /* Assuming THIS_FRAME is a dummy, return the frame ID of that
2150 dummy frame. The frame ID's base needs to match the TOS value
2151 returned by push_dummy_call, and the PC match the dummy frame's
2152 breakpoint. */
2153 static struct frame_id
2154 s390_dummy_id (struct gdbarch *gdbarch, struct frame_info *this_frame)
2155 {
2156 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
2157 CORE_ADDR sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
2158 sp = gdbarch_addr_bits_remove (gdbarch, sp);
2159
2160 return frame_id_build (sp + 16*word_size + 32,
2161 get_frame_pc (this_frame));
2162 }
2163
2164 static CORE_ADDR
2165 s390_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
2166 {
2167 /* Both the 32- and 64-bit ABI's say that the stack pointer should
2168 always be aligned on an eight-byte boundary. */
2169 return (addr & -8);
2170 }
2171
2172
2173 /* Function return value access. */
2174
2175 static enum return_value_convention
2176 s390_return_value_convention (struct gdbarch *gdbarch, struct type *type)
2177 {
2178 int length = TYPE_LENGTH (type);
2179 if (length > 8)
2180 return RETURN_VALUE_STRUCT_CONVENTION;
2181
2182 switch (TYPE_CODE (type))
2183 {
2184 case TYPE_CODE_STRUCT:
2185 case TYPE_CODE_UNION:
2186 case TYPE_CODE_ARRAY:
2187 return RETURN_VALUE_STRUCT_CONVENTION;
2188
2189 default:
2190 return RETURN_VALUE_REGISTER_CONVENTION;
2191 }
2192 }
2193
2194 static enum return_value_convention
2195 s390_return_value (struct gdbarch *gdbarch, struct type *func_type,
2196 struct type *type, struct regcache *regcache,
2197 gdb_byte *out, const gdb_byte *in)
2198 {
2199 enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
2200 int word_size = gdbarch_ptr_bit (gdbarch) / 8;
2201 int length = TYPE_LENGTH (type);
2202 enum return_value_convention rvc =
2203 s390_return_value_convention (gdbarch, type);
2204 if (in)
2205 {
2206 switch (rvc)
2207 {
2208 case RETURN_VALUE_REGISTER_CONVENTION:
2209 if (TYPE_CODE (type) == TYPE_CODE_FLT
2210 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
2211 {
2212 /* When we store a single-precision value in an FP register,
2213 it occupies the leftmost bits. */
2214 regcache_cooked_write_part (regcache, S390_F0_REGNUM,
2215 0, length, in);
2216 }
2217 else if (length <= word_size)
2218 {
2219 /* Integer arguments are always extended to word size. */
2220 if (TYPE_UNSIGNED (type))
2221 regcache_cooked_write_unsigned (regcache, S390_R2_REGNUM,
2222 extract_unsigned_integer (in, length, byte_order));
2223 else
2224 regcache_cooked_write_signed (regcache, S390_R2_REGNUM,
2225 extract_signed_integer (in, length, byte_order));
2226 }
2227 else if (length == 2*word_size)
2228 {
2229 regcache_cooked_write (regcache, S390_R2_REGNUM, in);
2230 regcache_cooked_write (regcache, S390_R3_REGNUM, in + word_size);
2231 }
2232 else
2233 internal_error (__FILE__, __LINE__, _("invalid return type"));
2234 break;
2235
2236 case RETURN_VALUE_STRUCT_CONVENTION:
2237 error (_("Cannot set function return value."));
2238 break;
2239 }
2240 }
2241 else if (out)
2242 {
2243 switch (rvc)
2244 {
2245 case RETURN_VALUE_REGISTER_CONVENTION:
2246 if (TYPE_CODE (type) == TYPE_CODE_FLT
2247 || TYPE_CODE (type) == TYPE_CODE_DECFLOAT)
2248 {
2249 /* When we store a single-precision value in an FP register,
2250 it occupies the leftmost bits. */
2251 regcache_cooked_read_part (regcache, S390_F0_REGNUM,
2252 0, length, out);
2253 }
2254 else if (length <= word_size)
2255 {
2256 /* Integer arguments occupy the rightmost bits. */
2257 regcache_cooked_read_part (regcache, S390_R2_REGNUM,
2258 word_size - length, length, out);
2259 }
2260 else if (length == 2*word_size)
2261 {
2262 regcache_cooked_read (regcache, S390_R2_REGNUM, out);
2263 regcache_cooked_read (regcache, S390_R3_REGNUM, out + word_size);
2264 }
2265 else
2266 internal_error (__FILE__, __LINE__, _("invalid return type"));
2267 break;
2268
2269 case RETURN_VALUE_STRUCT_CONVENTION:
2270 error (_("Function return value unknown."));
2271 break;
2272 }
2273 }
2274
2275 return rvc;
2276 }
2277
2278
2279 /* Breakpoints. */
2280
2281 static const gdb_byte *
2282 s390_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr, int *lenptr)
2283 {
2284 static const gdb_byte breakpoint[] = { 0x0, 0x1 };
2285
2286 *lenptr = sizeof (breakpoint);
2287 return breakpoint;
2288 }
2289
2290
2291 /* Address handling. */
2292
2293 static CORE_ADDR
2294 s390_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
2295 {
2296 return addr & 0x7fffffff;
2297 }
2298
2299 static int
2300 s390_address_class_type_flags (int byte_size, int dwarf2_addr_class)
2301 {
2302 if (byte_size == 4)
2303 return TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
2304 else
2305 return 0;
2306 }
2307
2308 static const char *
2309 s390_address_class_type_flags_to_name (struct gdbarch *gdbarch, int type_flags)
2310 {
2311 if (type_flags & TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1)
2312 return "mode32";
2313 else
2314 return NULL;
2315 }
2316
2317 static int
2318 s390_address_class_name_to_type_flags (struct gdbarch *gdbarch, const char *name,
2319 int *type_flags_ptr)
2320 {
2321 if (strcmp (name, "mode32") == 0)
2322 {
2323 *type_flags_ptr = TYPE_INSTANCE_FLAG_ADDRESS_CLASS_1;
2324 return 1;
2325 }
2326 else
2327 return 0;
2328 }
2329
2330 /* Set up gdbarch struct. */
2331
2332 static struct gdbarch *
2333 s390_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
2334 {
2335 struct gdbarch *gdbarch;
2336 struct gdbarch_tdep *tdep;
2337
2338 /* First see if there is already a gdbarch that can satisfy the request. */
2339 arches = gdbarch_list_lookup_by_info (arches, &info);
2340 if (arches != NULL)
2341 return arches->gdbarch;
2342
2343 /* None found: is the request for a s390 architecture? */
2344 if (info.bfd_arch_info->arch != bfd_arch_s390)
2345 return NULL; /* No; then it's not for us. */
2346
2347 /* Yes: create a new gdbarch for the specified machine type. */
2348 tdep = XCALLOC (1, struct gdbarch_tdep);
2349 gdbarch = gdbarch_alloc (&info, tdep);
2350
2351 set_gdbarch_believe_pcc_promotion (gdbarch, 0);
2352 set_gdbarch_char_signed (gdbarch, 0);
2353
2354 /* S/390 GNU/Linux uses either 64-bit or 128-bit long doubles.
2355 We can safely let them default to 128-bit, since the debug info
2356 will give the size of type actually used in each case. */
2357 set_gdbarch_long_double_bit (gdbarch, 128);
2358 set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
2359
2360 /* Amount PC must be decremented by after a breakpoint. This is
2361 often the number of bytes returned by gdbarch_breakpoint_from_pc but not
2362 always. */
2363 set_gdbarch_decr_pc_after_break (gdbarch, 2);
2364 /* Stack grows downward. */
2365 set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
2366 set_gdbarch_breakpoint_from_pc (gdbarch, s390_breakpoint_from_pc);
2367 set_gdbarch_skip_prologue (gdbarch, s390_skip_prologue);
2368 set_gdbarch_in_function_epilogue_p (gdbarch, s390_in_function_epilogue_p);
2369
2370 set_gdbarch_pc_regnum (gdbarch, S390_PC_REGNUM);
2371 set_gdbarch_sp_regnum (gdbarch, S390_SP_REGNUM);
2372 set_gdbarch_fp0_regnum (gdbarch, S390_F0_REGNUM);
2373 set_gdbarch_num_regs (gdbarch, S390_NUM_REGS);
2374 set_gdbarch_num_pseudo_regs (gdbarch, S390_NUM_PSEUDO_REGS);
2375 set_gdbarch_register_name (gdbarch, s390_register_name);
2376 set_gdbarch_register_type (gdbarch, s390_register_type);
2377 set_gdbarch_stab_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
2378 set_gdbarch_dwarf2_reg_to_regnum (gdbarch, s390_dwarf_reg_to_regnum);
2379 set_gdbarch_value_from_register (gdbarch, s390_value_from_register);
2380 set_gdbarch_register_reggroup_p (gdbarch, s390_register_reggroup_p);
2381 set_gdbarch_regset_from_core_section (gdbarch,
2382 s390_regset_from_core_section);
2383
2384 /* Inferior function calls. */
2385 set_gdbarch_push_dummy_call (gdbarch, s390_push_dummy_call);
2386 set_gdbarch_dummy_id (gdbarch, s390_dummy_id);
2387 set_gdbarch_frame_align (gdbarch, s390_frame_align);
2388 set_gdbarch_return_value (gdbarch, s390_return_value);
2389
2390 /* Frame handling. */
2391 dwarf2_frame_set_init_reg (gdbarch, s390_dwarf2_frame_init_reg);
2392 dwarf2_append_unwinders (gdbarch);
2393 frame_base_append_sniffer (gdbarch, dwarf2_frame_base_sniffer);
2394 frame_unwind_append_unwinder (gdbarch, &s390_stub_frame_unwind);
2395 frame_unwind_append_unwinder (gdbarch, &s390_sigtramp_frame_unwind);
2396 frame_unwind_append_unwinder (gdbarch, &s390_frame_unwind);
2397 frame_base_set_default (gdbarch, &s390_frame_base);
2398 set_gdbarch_unwind_pc (gdbarch, s390_unwind_pc);
2399 set_gdbarch_unwind_sp (gdbarch, s390_unwind_sp);
2400
2401 switch (info.bfd_arch_info->mach)
2402 {
2403 case bfd_mach_s390_31:
2404 tdep->abi = ABI_LINUX_S390;
2405
2406 tdep->gregset = &s390_gregset;
2407 tdep->sizeof_gregset = s390_sizeof_gregset;
2408 tdep->fpregset = &s390_fpregset;
2409 tdep->sizeof_fpregset = s390_sizeof_fpregset;
2410
2411 set_gdbarch_addr_bits_remove (gdbarch, s390_addr_bits_remove);
2412 set_gdbarch_pseudo_register_read (gdbarch, s390_pseudo_register_read);
2413 set_gdbarch_pseudo_register_write (gdbarch, s390_pseudo_register_write);
2414 set_solib_svr4_fetch_link_map_offsets
2415 (gdbarch, svr4_ilp32_fetch_link_map_offsets);
2416
2417 break;
2418 case bfd_mach_s390_64:
2419 tdep->abi = ABI_LINUX_ZSERIES;
2420
2421 tdep->gregset = &s390x_gregset;
2422 tdep->sizeof_gregset = s390x_sizeof_gregset;
2423 tdep->fpregset = &s390_fpregset;
2424 tdep->sizeof_fpregset = s390_sizeof_fpregset;
2425
2426 set_gdbarch_long_bit (gdbarch, 64);
2427 set_gdbarch_long_long_bit (gdbarch, 64);
2428 set_gdbarch_ptr_bit (gdbarch, 64);
2429 set_gdbarch_pseudo_register_read (gdbarch, s390x_pseudo_register_read);
2430 set_gdbarch_pseudo_register_write (gdbarch, s390x_pseudo_register_write);
2431 set_solib_svr4_fetch_link_map_offsets
2432 (gdbarch, svr4_lp64_fetch_link_map_offsets);
2433 set_gdbarch_address_class_type_flags (gdbarch,
2434 s390_address_class_type_flags);
2435 set_gdbarch_address_class_type_flags_to_name (gdbarch,
2436 s390_address_class_type_flags_to_name);
2437 set_gdbarch_address_class_name_to_type_flags (gdbarch,
2438 s390_address_class_name_to_type_flags);
2439 break;
2440 }
2441
2442 set_gdbarch_print_insn (gdbarch, print_insn_s390);
2443
2444 set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
2445
2446 /* Enable TLS support. */
2447 set_gdbarch_fetch_tls_load_module_address (gdbarch,
2448 svr4_fetch_objfile_link_map);
2449
2450 return gdbarch;
2451 }
2452
2453
2454
2455 extern initialize_file_ftype _initialize_s390_tdep; /* -Wmissing-prototypes */
2456
2457 void
2458 _initialize_s390_tdep (void)
2459 {
2460
2461 /* Hook us into the gdbarch mechanism. */
2462 register_gdbarch_init (bfd_arch_s390, s390_gdbarch_init);
2463 }
This page took 0.082641 seconds and 4 git commands to generate.