gdb/serial.c

   1 /* Generic serial interface routines
   2
   3    Copyright (C) 1992-2019 Free Software Foundation, Inc.
   4
   5    This file is part of GDB.
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License as published by
   9    the Free Software Foundation; either version 3 of the License, or
  10    (at your option) any later version.
  11
  12    This program is distributed in the hope that it will be useful,
  13    but WITHOUT ANY WARRANTY; without even the implied warranty of
  14    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15    GNU General Public License for more details.
  16
  17    You should have received a copy of the GNU General Public License
  18    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  19
  20 #include "defs.h"
  21 #include <ctype.h>
  22 #include "serial.h"
  23 #include "gdbcmd.h"
  24 #include "cli/cli-utils.h"
  25
  26 /* Is serial being debugged?  */
  27
  28 static unsigned int global_serial_debug_p;
  29
  30 /* Serial I/O handlers.  */
  31
  32 static std::vector<const struct serial_ops *> serial_ops_list;
  33
  34 /* Pointer to list of scb's.  */
  35
  36 static struct serial *scb_base;
  37
  38 /* Non-NULL gives filename which contains a recording of the remote session,
  39    suitable for playback by gdbserver.  */
  40
  41 static char *serial_logfile = NULL;
  42 static struct ui_file *serial_logfp = NULL;
  43
  44 static const struct serial_ops *serial_interface_lookup (const char *);
  45 static void serial_logchar (struct ui_file *stream,
  46                             int ch_type, int ch, int timeout);
  47 static const char logbase_hex[] = "hex";
  48 static const char logbase_octal[] = "octal";
  49 static const char logbase_ascii[] = "ascii";
  50 static const char *const logbase_enums[] =
  51 {logbase_hex, logbase_octal, logbase_ascii, NULL};
  52 static const char *serial_logbase = logbase_ascii;
  53 \f
  54
  55 static int serial_current_type = 0;
  56
  57 /* Log char CH of type CHTYPE, with TIMEOUT.  */
  58
  59 /* Define bogus char to represent a BREAK.  Should be careful to choose a value
  60    that can't be confused with a normal char, or an error code.  */
  61 #define SERIAL_BREAK 1235
  62
  63 static void
  64 serial_logchar (struct ui_file *stream, int ch_type, int ch, int timeout)
  65 {
  66   if (ch_type != serial_current_type)
  67     {
  68       fprintf_unfiltered (stream, "\n%c ", ch_type);
  69       serial_current_type = ch_type;
  70     }
  71
  72   if (serial_logbase != logbase_ascii)
  73     fputc_unfiltered (' ', stream);
  74
  75   switch (ch)
  76     {
  77     case SERIAL_TIMEOUT:
  78       fprintf_unfiltered (stream, "<Timeout: %d seconds>", timeout);
  79       return;
  80     case SERIAL_ERROR:
  81       fprintf_unfiltered (stream, "<Error: %s>", safe_strerror (errno));
  82       return;
  83     case SERIAL_EOF:
  84       fputs_unfiltered ("<Eof>", stream);
  85       return;
  86     case SERIAL_BREAK:
  87       fputs_unfiltered ("<Break>", stream);
  88       return;
  89     default:
  90       if (serial_logbase == logbase_hex)
  91         fprintf_unfiltered (stream, "%02x", ch & 0xff);
  92       else if (serial_logbase == logbase_octal)
  93         fprintf_unfiltered (stream, "%03o", ch & 0xff);
  94       else
  95         switch (ch)
  96           {
  97           case '\\':
  98             fputs_unfiltered ("\\\\", stream);
  99             break;
 100           case '\b':
 101             fputs_unfiltered ("\\b", stream);
 102             break;
 103           case '\f':
 104             fputs_unfiltered ("\\f", stream);
 105             break;
 106           case '\n':
 107             fputs_unfiltered ("\\n", stream);
 108             break;
 109           case '\r':
 110             fputs_unfiltered ("\\r", stream);
 111             break;
 112           case '\t':
 113             fputs_unfiltered ("\\t", stream);
 114             break;
 115           case '\v':
 116             fputs_unfiltered ("\\v", stream);
 117             break;
 118           default:
 119             fprintf_unfiltered (stream,
 120                                 isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF);
 121             break;
 122           }
 123     }
 124 }
 125
 126 void
 127 serial_log_command (struct target_ops *self, const char *cmd)
 128 {
 129   if (!serial_logfp)
 130     return;
 131
 132   serial_current_type = 'c';
 133
 134   fputs_unfiltered ("\nc ", serial_logfp);
 135   fputs_unfiltered (cmd, serial_logfp);
 136
 137   /* Make sure that the log file is as up-to-date as possible,
 138      in case we are getting ready to dump core or something.  */
 139   gdb_flush (serial_logfp);
 140 }
 141
 142 \f
 143 static const struct serial_ops *
 144 serial_interface_lookup (const char *name)
 145 {
 146   for (const serial_ops *ops : serial_ops_list)
 147     if (strcmp (name, ops->name) == 0)
 148       return ops;
 149
 150   return NULL;
 151 }
 152
 153 void
 154 serial_add_interface (const struct serial_ops *optable)
 155 {
 156   serial_ops_list.push_back (optable);
 157 }
 158
 159 /* Return the open serial device for FD, if found, or NULL if FD is
 160    not already opened.  */
 161
 162 struct serial *
 163 serial_for_fd (int fd)
 164 {
 165   struct serial *scb;
 166
 167   for (scb = scb_base; scb; scb = scb->next)
 168     if (scb->fd == fd)
 169       return scb;
 170
 171   return NULL;
 172 }
 173
 174 /* Create a new serial for OPS.  */
 175
 176 static struct serial *
 177 new_serial (const struct serial_ops *ops)
 178 {
 179   struct serial *scb;
 180
 181   scb = XCNEW (struct serial);
 182
 183   scb->ops = ops;
 184
 185   scb->bufp = scb->buf;
 186   scb->error_fd = -1;
 187   scb->refcnt = 1;
 188
 189   return scb;
 190 }
 191
 192 static struct serial *serial_open_ops_1 (const struct serial_ops *ops,
 193                                          const char *open_name);
 194
 195 /* Open up a device or a network socket, depending upon the syntax of NAME.  */
 196
 197 struct serial *
 198 serial_open (const char *name)
 199 {
 200   const struct serial_ops *ops;
 201   const char *open_name = name;
 202
 203   if (startswith (name, "|"))
 204     {
 205       ops = serial_interface_lookup ("pipe");
 206       /* Discard ``|'' and any space before the command itself.  */
 207       ++open_name;
 208       open_name = skip_spaces (open_name);
 209     }
 210   /* Check for a colon, suggesting an IP address/port pair.
 211      Do this *after* checking for all the interesting prefixes.  We
 212      don't want to constrain the syntax of what can follow them.  */
 213   else if (strchr (name, ':'))
 214     ops = serial_interface_lookup ("tcp");
 215   else
 216     {
 217 #ifndef USE_WIN32API
 218       /* Check to see if name is a socket.  If it is, then treat it
 219          as such.  Otherwise assume that it's a character device.  */
 220       struct stat sb;
 221       if (stat (name, &sb) == 0 && (sb.st_mode & S_IFMT) == S_IFSOCK)
 222         ops = serial_interface_lookup ("local");
 223       else
 224 #endif
 225         ops = serial_interface_lookup ("hardwire");
 226     }
 227
 228   if (!ops)
 229     return NULL;
 230
 231   return serial_open_ops_1 (ops, open_name);
 232 }
 233
 234 /* Open up a serial for OPS, passing OPEN_NAME to the open method.  */
 235
 236 static struct serial *
 237 serial_open_ops_1 (const struct serial_ops *ops, const char *open_name)
 238 {
 239   struct serial *scb;
 240
 241   scb = new_serial (ops);
 242
 243   /* `...->open (...)' would get expanded by the open(2) syscall macro.  */
 244   if ((*scb->ops->open) (scb, open_name))
 245     {
 246       xfree (scb);
 247       return NULL;
 248     }
 249
 250   scb->next = scb_base;
 251   scb_base = scb;
 252
 253   if (serial_logfile != NULL)
 254     {
 255       stdio_file_up file (new stdio_file ());
 256
 257       if (!file->open (serial_logfile, "w"))
 258         perror_with_name (serial_logfile);
 259
 260       serial_logfp = file.release ();
 261     }
 262
 263   return scb;
 264 }
 265
 266 /* See serial.h.  */
 267
 268 struct serial *
 269 serial_open_ops (const struct serial_ops *ops)
 270 {
 271   return serial_open_ops_1 (ops, NULL);
 272 }
 273
 274 /* Open a new serial stream using a file handle, using serial
 275    interface ops OPS.  */
 276
 277 static struct serial *
 278 serial_fdopen_ops (const int fd, const struct serial_ops *ops)
 279 {
 280   struct serial *scb;
 281
 282   if (!ops)
 283     {
 284       ops = serial_interface_lookup ("terminal");
 285       if (!ops)
 286         ops = serial_interface_lookup ("hardwire");
 287     }
 288
 289   if (!ops)
 290     return NULL;
 291
 292   scb = new_serial (ops);
 293
 294   scb->next = scb_base;
 295   scb_base = scb;
 296
 297   if ((ops->fdopen) != NULL)
 298     (*ops->fdopen) (scb, fd);
 299   else
 300     scb->fd = fd;
 301
 302   return scb;
 303 }
 304
 305 struct serial *
 306 serial_fdopen (const int fd)
 307 {
 308   return serial_fdopen_ops (fd, NULL);
 309 }
 310
 311 static void
 312 do_serial_close (struct serial *scb, int really_close)
 313 {
 314   struct serial *tmp_scb;
 315
 316   if (serial_logfp)
 317     {
 318       fputs_unfiltered ("\nEnd of log\n", serial_logfp);
 319       serial_current_type = 0;
 320
 321       /* XXX - What if serial_logfp == gdb_stdout or gdb_stderr?  */
 322       delete serial_logfp;
 323       serial_logfp = NULL;
 324     }
 325
 326   /* ensure that the FD has been taken out of async mode.  */
 327   if (scb->async_handler != NULL)
 328     serial_async (scb, NULL, NULL);
 329
 330   if (really_close)
 331     scb->ops->close (scb);
 332
 333   /* For serial_is_open.  */
 334   scb->bufp = NULL;
 335
 336   if (scb_base == scb)
 337     scb_base = scb_base->next;
 338   else
 339     for (tmp_scb = scb_base; tmp_scb; tmp_scb = tmp_scb->next)
 340       {
 341         if (tmp_scb->next != scb)
 342           continue;
 343
 344         tmp_scb->next = tmp_scb->next->next;
 345         break;
 346       }
 347
 348   serial_unref (scb);
 349 }
 350
 351 void
 352 serial_close (struct serial *scb)
 353 {
 354   do_serial_close (scb, 1);
 355 }
 356
 357 void
 358 serial_un_fdopen (struct serial *scb)
 359 {
 360   do_serial_close (scb, 0);
 361 }
 362
 363 int
 364 serial_is_open (struct serial *scb)
 365 {
 366   return scb->bufp != NULL;
 367 }
 368
 369 void
 370 serial_ref (struct serial *scb)
 371 {
 372   scb->refcnt++;
 373 }
 374
 375 void
 376 serial_unref (struct serial *scb)
 377 {
 378   --scb->refcnt;
 379   if (scb->refcnt == 0)
 380     xfree (scb);
 381 }
 382
 383 int
 384 serial_readchar (struct serial *scb, int timeout)
 385 {
 386   int ch;
 387
 388   /* FIXME: cagney/1999-10-11: Don't enable this check until the ASYNC
 389      code is finished.  */
 390   if (0 && serial_is_async_p (scb) && timeout < 0)
 391     internal_error (__FILE__, __LINE__,
 392                     _("serial_readchar: blocking read in async mode"));
 393
 394   ch = scb->ops->readchar (scb, timeout);
 395   if (serial_logfp != NULL)
 396     {
 397       serial_logchar (serial_logfp, 'r', ch, timeout);
 398
 399       /* Make sure that the log file is as up-to-date as possible,
 400          in case we are getting ready to dump core or something.  */
 401       gdb_flush (serial_logfp);
 402     }
 403   if (serial_debug_p (scb))
 404     {
 405       fprintf_unfiltered (gdb_stdlog, "[");
 406       serial_logchar (gdb_stdlog, 'r', ch, timeout);
 407       fprintf_unfiltered (gdb_stdlog, "]");
 408       gdb_flush (gdb_stdlog);
 409     }
 410
 411   return (ch);
 412 }
 413
 414 int
 415 serial_write (struct serial *scb, const void *buf, size_t count)
 416 {
 417   if (serial_logfp != NULL)
 418     {
 419       const char *str = (const char *) buf;
 420       size_t c;
 421
 422       for (c = 0; c < count; c++)
 423         serial_logchar (serial_logfp, 'w', str[c] & 0xff, 0);
 424
 425       /* Make sure that the log file is as up-to-date as possible,
 426          in case we are getting ready to dump core or something.  */
 427       gdb_flush (serial_logfp);
 428     }
 429   if (serial_debug_p (scb))
 430     {
 431       const char *str = (const char *) buf;
 432       size_t c;
 433
 434       for (c = 0; c < count; c++)
 435         {
 436           fprintf_unfiltered (gdb_stdlog, "[");
 437           serial_logchar (gdb_stdlog, 'w', str[c] & 0xff, 0);
 438           fprintf_unfiltered (gdb_stdlog, "]");
 439         }
 440       gdb_flush (gdb_stdlog);
 441     }
 442
 443   return (scb->ops->write (scb, buf, count));
 444 }
 445
 446 void
 447 serial_printf (struct serial *desc, const char *format, ...)
 448 {
 449   va_list args;
 450   va_start (args, format);
 451
 452   std::string buf = string_vprintf (format, args);
 453   serial_write (desc, buf.c_str (), buf.length ());
 454
 455   va_end (args);
 456 }
 457
 458 int
 459 serial_drain_output (struct serial *scb)
 460 {
 461   return scb->ops->drain_output (scb);
 462 }
 463
 464 int
 465 serial_flush_output (struct serial *scb)
 466 {
 467   return scb->ops->flush_output (scb);
 468 }
 469
 470 int
 471 serial_flush_input (struct serial *scb)
 472 {
 473   return scb->ops->flush_input (scb);
 474 }
 475
 476 int
 477 serial_send_break (struct serial *scb)
 478 {
 479   if (serial_logfp != NULL)
 480     serial_logchar (serial_logfp, 'w', SERIAL_BREAK, 0);
 481
 482   return (scb->ops->send_break (scb));
 483 }
 484
 485 void
 486 serial_raw (struct serial *scb)
 487 {
 488   scb->ops->go_raw (scb);
 489 }
 490
 491 serial_ttystate
 492 serial_get_tty_state (struct serial *scb)
 493 {
 494   return scb->ops->get_tty_state (scb);
 495 }
 496
 497 serial_ttystate
 498 serial_copy_tty_state (struct serial *scb, serial_ttystate ttystate)
 499 {
 500   return scb->ops->copy_tty_state (scb, ttystate);
 501 }
 502
 503 int
 504 serial_set_tty_state (struct serial *scb, serial_ttystate ttystate)
 505 {
 506   return scb->ops->set_tty_state (scb, ttystate);
 507 }
 508
 509 void
 510 serial_print_tty_state (struct serial *scb,
 511                         serial_ttystate ttystate,
 512                         struct ui_file *stream)
 513 {
 514   scb->ops->print_tty_state (scb, ttystate, stream);
 515 }
 516
 517 int
 518 serial_setbaudrate (struct serial *scb, int rate)
 519 {
 520   return scb->ops->setbaudrate (scb, rate);
 521 }
 522
 523 int
 524 serial_setstopbits (struct serial *scb, int num)
 525 {
 526   return scb->ops->setstopbits (scb, num);
 527 }
 528
 529 /* See serial.h.  */
 530
 531 int
 532 serial_setparity (struct serial *scb, int parity)
 533 {
 534   return scb->ops->setparity (scb, parity);
 535 }
 536
 537 int
 538 serial_can_async_p (struct serial *scb)
 539 {
 540   return (scb->ops->async != NULL);
 541 }
 542
 543 int
 544 serial_is_async_p (struct serial *scb)
 545 {
 546   return (scb->ops->async != NULL) && (scb->async_handler != NULL);
 547 }
 548
 549 void
 550 serial_async (struct serial *scb,
 551               serial_event_ftype *handler,
 552               void *context)
 553 {
 554   int changed = ((scb->async_handler == NULL) != (handler == NULL));
 555
 556   scb->async_handler = handler;
 557   scb->async_context = context;
 558   /* Only change mode if there is a need.  */
 559   if (changed)
 560     scb->ops->async (scb, handler != NULL);
 561 }
 562
 563 void
 564 serial_debug (struct serial *scb, int debug_p)
 565 {
 566   scb->debug_p = debug_p;
 567 }
 568
 569 int
 570 serial_debug_p (struct serial *scb)
 571 {
 572   return scb->debug_p || global_serial_debug_p;
 573 }
 574
 575 #ifdef USE_WIN32API
 576 void
 577 serial_wait_handle (struct serial *scb, HANDLE *read, HANDLE *except)
 578 {
 579   if (scb->ops->wait_handle)
 580     scb->ops->wait_handle (scb, read, except);
 581   else
 582     {
 583       *read = (HANDLE) _get_osfhandle (scb->fd);
 584       *except = NULL;
 585     }
 586 }
 587
 588 void
 589 serial_done_wait_handle (struct serial *scb)
 590 {
 591   if (scb->ops->done_wait_handle)
 592     scb->ops->done_wait_handle (scb);
 593 }
 594 #endif
 595
 596 int
 597 serial_pipe (struct serial *scbs[2])
 598 {
 599   const struct serial_ops *ops;
 600   int fildes[2];
 601
 602   ops = serial_interface_lookup ("pipe");
 603   if (!ops)
 604     {
 605       errno = ENOSYS;
 606       return -1;
 607     }
 608
 609   if (gdb_pipe (fildes) == -1)
 610     return -1;
 611
 612   scbs[0] = serial_fdopen_ops (fildes[0], ops);
 613   scbs[1] = serial_fdopen_ops (fildes[1], ops);
 614   return 0;
 615 }
 616
 617 /* Serial set/show framework.  */
 618
 619 static struct cmd_list_element *serial_set_cmdlist;
 620 static struct cmd_list_element *serial_show_cmdlist;
 621
 622 static void
 623 serial_set_cmd (const char *args, int from_tty)
 624 {
 625   printf_unfiltered ("\"set serial\" must be followed "
 626                      "by the name of a command.\n");
 627   help_list (serial_set_cmdlist, "set serial ", all_commands, gdb_stdout);
 628 }
 629
 630 static void
 631 serial_show_cmd (const char *args, int from_tty)
 632 {
 633   cmd_show_list (serial_show_cmdlist, from_tty, "");
 634 }
 635
 636 /* Baud rate specified for talking to serial target systems.  Default
 637    is left as -1, so targets can choose their own defaults.  */
 638 /* FIXME: This means that "show serial baud" and gr_files_info can
 639    print -1 or (unsigned int)-1.  This is a Bad User Interface.  */
 640
 641 int baud_rate = -1;
 642
 643 static void
 644 serial_baud_show_cmd (struct ui_file *file, int from_tty,
 645                       struct cmd_list_element *c, const char *value)
 646 {
 647   fprintf_filtered (file, _("Baud rate for remote serial I/O is %s.\n"),
 648                     value);
 649 }
 650
 651 /* Parity for serial port.  */
 652
 653 int serial_parity = GDBPARITY_NONE;
 654
 655 static const char parity_none[] = "none";
 656 static const char parity_odd[] = "odd";
 657 static const char parity_even[] = "even";
 658 static const char *const parity_enums[] =
 659   {parity_none, parity_odd, parity_even,  NULL};
 660 static const char *parity = parity_none;
 661
 662 /* Set serial_parity value.  */
 663
 664 static void
 665 set_parity (const char *ignore_args, int from_tty, struct cmd_list_element *c)
 666 {
 667   if (parity == parity_odd)
 668     serial_parity = GDBPARITY_ODD;
 669   else if (parity == parity_even)
 670     serial_parity = GDBPARITY_EVEN;
 671   else
 672     serial_parity = GDBPARITY_NONE;
 673 }
 674
 675 void
 676 _initialize_serial (void)
 677 {
 678 #if 0
 679   add_com ("connect", class_obscure, connect_command, _("\
 680 Connect the terminal directly up to the command monitor.\n\
 681 Use <CR>~. or <CR>~^D to break out."));
 682 #endif /* 0 */
 683
 684   add_prefix_cmd ("serial", class_maintenance, serial_set_cmd, _("\
 685 Set default serial/parallel port configuration."),
 686                   &serial_set_cmdlist, "set serial ",
 687                   0/*allow-unknown*/,
 688                   &setlist);
 689
 690   add_prefix_cmd ("serial", class_maintenance, serial_show_cmd, _("\
 691 Show default serial/parallel port configuration."),
 692                   &serial_show_cmdlist, "show serial ",
 693                   0/*allow-unknown*/,
 694                   &showlist);
 695
 696   /* If target is open when baud changes, it doesn't take effect until
 697      the next open (I think, not sure).  */
 698   add_setshow_zinteger_cmd ("baud", no_class, &baud_rate, _("\
 699 Set baud rate for remote serial I/O."), _("\
 700 Show baud rate for remote serial I/O."), _("\
 701 This value is used to set the speed of the serial port when debugging\n\
 702 using remote targets."),
 703                             NULL,
 704                             serial_baud_show_cmd,
 705                             &serial_set_cmdlist, &serial_show_cmdlist);
 706
 707   add_setshow_enum_cmd ("parity", no_class, parity_enums,
 708                         &parity, _("\
 709 Set parity for remote serial I/O."), _("\
 710 Show parity for remote serial I/O."), NULL,
 711                         set_parity,
 712                         NULL, /* FIXME: i18n: */
 713                         &serial_set_cmdlist, &serial_show_cmdlist);
 714
 715   add_setshow_filename_cmd ("remotelogfile", no_class, &serial_logfile, _("\
 716 Set filename for remote session recording."), _("\
 717 Show filename for remote session recording."), _("\
 718 This file is used to record the remote session for future playback\n\
 719 by gdbserver."),
 720                             NULL,
 721                             NULL, /* FIXME: i18n: */
 722                             &setlist, &showlist);
 723
 724   add_setshow_enum_cmd ("remotelogbase", no_class, logbase_enums,
 725                         &serial_logbase, _("\
 726 Set numerical base for remote session logging."), _("\
 727 Show numerical base for remote session logging."), NULL,
 728                         NULL,
 729                         NULL, /* FIXME: i18n: */
 730                         &setlist, &showlist);
 731
 732   add_setshow_zuinteger_cmd ("serial", class_maintenance,
 733                              &global_serial_debug_p, _("\
 734 Set serial debugging."), _("\
 735 Show serial debugging."), _("\
 736 When non-zero, serial port debugging is enabled."),
 737                              NULL,
 738                              NULL, /* FIXME: i18n: */
 739                              &setdebuglist, &showdebuglist);
 740 }