1 /* Remote serial support interface definitions for GDB, the GNU Debugger.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2004,
3 2005, 2006, 2007 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street, Fifth Floor,
20 Boston, MA 02110-1301, USA. */
31 /* For most routines, if a failure is indicated, then errno should be
34 /* Terminal state pointer. This is specific to each type of
37 typedef void *serial_ttystate
;
40 /* Try to open NAME. Returns a new `struct serial *' on success, NULL
41 on failure. Note that some open calls can block and, if possible,
42 should be written to be non-blocking, with calls to ui_look_hook
43 so they can be cancelled. An async interface for open could be
44 added to GDB if necessary. */
46 extern struct serial
*serial_open (const char *name
);
48 /* Find an already opened serial stream using a file handle. */
50 extern struct serial
*serial_for_fd (int fd
);
52 /* Open a new serial stream using a file handle. */
54 extern struct serial
*serial_fdopen (const int fd
);
56 /* Push out all buffers, close the device and destroy SCB. */
58 extern void serial_close (struct serial
*scb
);
60 /* Push out all buffers and destroy SCB without closing the device. */
62 extern void serial_un_fdopen (struct serial
*scb
);
64 /* Read one char from the serial device with TIMEOUT seconds to wait
65 or -1 to wait forever. Use timeout of 0 to effect a poll.
66 Infinite waits are not permitted. Returns unsigned char if ok, else
67 one of the following codes. Note that all error return-codes are
68 guaranteed to be < 0. */
71 SERIAL_ERROR
= -1, /* General error. */
72 SERIAL_TIMEOUT
= -2, /* Timeout or data-not-ready during read.
73 Unfortunately, through
74 deprecated_ui_loop_hook (), this can also
75 be a QUIT indication. */
76 SERIAL_EOF
= -3 /* General end-of-file or remote target
77 connection closed, indication. Includes
78 things like the line dropping dead. */
81 extern int serial_readchar (struct serial
*scb
, int timeout
);
83 /* Write LEN chars from STRING to the port SCB. Returns 0 for
84 success, non-zero for failure. */
86 extern int serial_write (struct serial
*scb
, const char *str
, int len
);
88 /* Write a printf style string onto the serial port. */
90 extern void serial_printf (struct serial
*desc
,
91 const char *,...) ATTR_FORMAT (printf
, 2, 3);
93 /* Allow pending output to drain. */
95 extern int serial_drain_output (struct serial
*);
97 /* Flush (discard) pending output. Might also flush input (if this
98 system can't flush only output). */
100 extern int serial_flush_output (struct serial
*);
102 /* Flush pending input. Might also flush output (if this system can't
103 flush only input). */
105 extern int serial_flush_input (struct serial
*);
107 /* Send a break between 0.25 and 0.5 seconds long. */
109 extern int serial_send_break (struct serial
*scb
);
111 /* Turn the port into raw mode. */
113 extern void serial_raw (struct serial
*scb
);
115 /* Return a pointer to a newly malloc'd ttystate containing the state
118 extern serial_ttystate
serial_get_tty_state (struct serial
*scb
);
120 /* Set the state of the tty to TTYSTATE. The change is immediate.
121 When changing to or from raw mode, input might be discarded.
122 Returns 0 for success, negative value for error (in which case
123 errno contains the error). */
125 extern int serial_set_tty_state (struct serial
*scb
, serial_ttystate ttystate
);
127 /* printf_filtered a user-comprehensible description of ttystate on
128 the specified STREAM. FIXME: At present this sends output to the
129 default stream - GDB_STDOUT. */
131 extern void serial_print_tty_state (struct serial
*scb
, serial_ttystate ttystate
, struct ui_file
*);
133 /* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
134 current state (generally obtained from a recent call to
135 serial_get_tty_state()), but be careful not to discard any input.
136 This means that we never switch in or out of raw mode, even if
137 NEW_TTYSTATE specifies a switch. */
139 extern int serial_noflush_set_tty_state (struct serial
*scb
, serial_ttystate new_ttystate
, serial_ttystate old_ttystate
);
141 /* Set the baudrate to the decimal value supplied. Returns 0 for
142 success, -1 for failure. */
144 extern int serial_setbaudrate (struct serial
*scb
, int rate
);
146 /* Set the number of stop bits to the value specified. Returns 0 for
147 success, -1 for failure. */
149 #define SERIAL_1_STOPBITS 1
150 #define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
151 #define SERIAL_2_STOPBITS 3
153 extern int serial_setstopbits (struct serial
*scb
, int num
);
155 /* Asynchronous serial interface: */
157 /* Can the serial device support asynchronous mode? */
159 extern int serial_can_async_p (struct serial
*scb
);
161 /* Has the serial device been put in asynchronous mode? */
163 extern int serial_is_async_p (struct serial
*scb
);
165 /* For ASYNC enabled devices, register a callback and enable
166 asynchronous mode. To disable asynchronous mode, register a NULL
169 typedef void (serial_event_ftype
) (struct serial
*scb
, void *context
);
170 extern void serial_async (struct serial
*scb
, serial_event_ftype
*handler
, void *context
);
172 /* Provide direct access to the underlying FD (if any) used to
173 implement the serial device. This interface is clearly
174 deprecated. Will call internal_error() if the operation isn't
175 applicable to the current serial device. */
177 extern int deprecated_serial_fd (struct serial
*scb
);
179 /* Trace/debug mechanism.
181 serial_debug() enables/disables internal debugging.
182 serial_debug_p() indicates the current debug state. */
184 extern void serial_debug (struct serial
*scb
, int debug_p
);
186 extern int serial_debug_p (struct serial
*scb
);
189 /* Details of an instance of a serial object */
193 int fd
; /* File descriptor */
194 /* File descriptor for a separate error stream that should be
195 immediately forwarded to gdb_stderr. This may be -1.
196 If != -1, this descriptor should be non-blocking or
197 ops->avail should be non-NULL. */
199 struct serial_ops
*ops
; /* Function vector */
200 void *state
; /* Local context info for open FD */
201 serial_ttystate ttystate
; /* Not used (yet) */
202 int bufcnt
; /* Amount of data remaining in receive
203 buffer. -ve for sticky errors. */
204 unsigned char *bufp
; /* Current byte */
205 unsigned char buf
[BUFSIZ
]; /* Da buffer itself */
206 int current_timeout
; /* (ser-unix.c termio{,s} only), last
208 int timeout_remaining
; /* (ser-unix.c termio{,s} only), we
209 still need to wait for this many
211 char *name
; /* The name of the device or host */
212 struct serial
*next
; /* Pointer to the next `struct serial *' */
213 int refcnt
; /* Number of pointers to this block */
214 int debug_p
; /* Trace this serial devices operation. */
215 int async_state
; /* Async internal state. */
216 void *async_context
; /* Async event thread's context */
217 serial_event_ftype
*async_handler
;/* Async event handler */
223 struct serial_ops
*next
;
224 int (*open
) (struct serial
*, const char *name
);
225 void (*close
) (struct serial
*);
226 int (*readchar
) (struct serial
*, int timeout
);
227 int (*write
) (struct serial
*, const char *str
, int len
);
228 /* Discard pending output */
229 int (*flush_output
) (struct serial
*);
230 /* Discard pending input */
231 int (*flush_input
) (struct serial
*);
232 int (*send_break
) (struct serial
*);
233 void (*go_raw
) (struct serial
*);
234 serial_ttystate (*get_tty_state
) (struct serial
*);
235 int (*set_tty_state
) (struct serial
*, serial_ttystate
);
236 void (*print_tty_state
) (struct serial
*, serial_ttystate
,
238 int (*noflush_set_tty_state
) (struct serial
*, serial_ttystate
,
240 int (*setbaudrate
) (struct serial
*, int rate
);
241 int (*setstopbits
) (struct serial
*, int num
);
242 /* Wait for output to drain */
243 int (*drain_output
) (struct serial
*);
244 /* Change the serial device into/out of asynchronous mode, call
245 the specified function when ever there is something
247 void (*async
) (struct serial
*scb
, int async_p
);
248 /* Perform a low-level read operation, reading (at most) COUNT
249 bytes into SCB->BUF. */
250 int (*read_prim
)(struct serial
*scb
, size_t count
);
251 /* Perform a low-level write operation, writing (at most) COUNT
253 int (*write_prim
)(struct serial
*scb
, const void *buf
, size_t count
);
254 /* Return that number of bytes that can be read from FD
255 without blocking. Return value of -1 means that the
256 the read will not block even if less that requested bytes
258 int (*avail
)(struct serial
*scb
, int fd
);
261 /* Return a handle to wait on, indicating available data from SCB
262 when signaled, in *READ. Return a handle indicating errors
264 void (*wait_handle
) (struct serial
*scb
, HANDLE
*read
, HANDLE
*except
);
265 void (*done_wait_handle
) (struct serial
*scb
);
266 #endif /* USE_WIN32API */
269 /* Add a new serial interface to the interface list */
271 extern void serial_add_interface (struct serial_ops
* optable
);
273 /* File in which to record the remote debugging session */
275 extern void serial_log_command (const char *);
279 /* Windows-only: find or create handles that we can wait on for this
281 extern void serial_wait_handle (struct serial
*, HANDLE
*, HANDLE
*);
283 /* Windows-only: signal that we are done with the wait handles. */
284 extern void serial_done_wait_handle (struct serial
*);
286 #endif /* USE_WIN32API */
288 #endif /* SERIAL_H */