1 /* Generic symbol file reading for the GNU debugger, GDB.
3 Copyright (C) 1990-2017 Free Software Foundation, Inc.
5 Contributed by Cygnus Support, using pieces from other GDB modules.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
23 #include "arch-utils.h"
35 #include "breakpoint.h"
37 #include "complaints.h"
41 #include "filenames.h" /* for DOSish file names */
42 #include "gdb-stabs.h"
43 #include "gdb_obstack.h"
44 #include "completer.h"
47 #include "readline/readline.h"
51 #include "parser-defs.h"
58 #include "cli/cli-utils.h"
59 #include "common/byte-vector.h"
62 #include <sys/types.h>
70 int (*deprecated_ui_load_progress_hook
) (const char *section
,
72 void (*deprecated_show_load_progress
) (const char *section
,
73 unsigned long section_sent
,
74 unsigned long section_size
,
75 unsigned long total_sent
,
76 unsigned long total_size
);
77 void (*deprecated_pre_add_symbol_hook
) (const char *);
78 void (*deprecated_post_add_symbol_hook
) (void);
80 static void clear_symtab_users_cleanup (void *ignore
);
82 /* Global variables owned by this file. */
83 int readnow_symbol_files
; /* Read full symbols immediately. */
85 /* Functions this file defines. */
87 static void symbol_file_add_main_1 (const char *args
, symfile_add_flags add_flags
,
90 static const struct sym_fns
*find_sym_fns (bfd
*);
92 static void overlay_invalidate_all (void);
94 static void simple_free_overlay_table (void);
96 static void read_target_long_array (CORE_ADDR
, unsigned int *, int, int,
99 static int simple_read_overlay_table (void);
101 static int simple_overlay_update_1 (struct obj_section
*);
103 static void symfile_find_segment_sections (struct objfile
*objfile
);
105 /* List of all available sym_fns. On gdb startup, each object file reader
106 calls add_symtab_fns() to register information on each format it is
109 struct registered_sym_fns
111 registered_sym_fns (bfd_flavour sym_flavour_
, const struct sym_fns
*sym_fns_
)
112 : sym_flavour (sym_flavour_
), sym_fns (sym_fns_
)
115 /* BFD flavour that we handle. */
116 enum bfd_flavour sym_flavour
;
118 /* The "vtable" of symbol functions. */
119 const struct sym_fns
*sym_fns
;
122 static std::vector
<registered_sym_fns
> symtab_fns
;
124 /* Values for "set print symbol-loading". */
126 const char print_symbol_loading_off
[] = "off";
127 const char print_symbol_loading_brief
[] = "brief";
128 const char print_symbol_loading_full
[] = "full";
129 static const char *print_symbol_loading_enums
[] =
131 print_symbol_loading_off
,
132 print_symbol_loading_brief
,
133 print_symbol_loading_full
,
136 static const char *print_symbol_loading
= print_symbol_loading_full
;
138 /* If non-zero, shared library symbols will be added automatically
139 when the inferior is created, new libraries are loaded, or when
140 attaching to the inferior. This is almost always what users will
141 want to have happen; but for very large programs, the startup time
142 will be excessive, and so if this is a problem, the user can clear
143 this flag and then add the shared library symbols as needed. Note
144 that there is a potential for confusion, since if the shared
145 library symbols are not loaded, commands like "info fun" will *not*
146 report all the functions that are actually present. */
148 int auto_solib_add
= 1;
151 /* Return non-zero if symbol-loading messages should be printed.
152 FROM_TTY is the standard from_tty argument to gdb commands.
153 If EXEC is non-zero the messages are for the executable.
154 Otherwise, messages are for shared libraries.
155 If FULL is non-zero then the caller is printing a detailed message.
156 E.g., the message includes the shared library name.
157 Otherwise, the caller is printing a brief "summary" message. */
160 print_symbol_loading_p (int from_tty
, int exec
, int full
)
162 if (!from_tty
&& !info_verbose
)
167 /* We don't check FULL for executables, there are few such
168 messages, therefore brief == full. */
169 return print_symbol_loading
!= print_symbol_loading_off
;
172 return print_symbol_loading
== print_symbol_loading_full
;
173 return print_symbol_loading
== print_symbol_loading_brief
;
176 /* True if we are reading a symbol table. */
178 int currently_reading_symtab
= 0;
180 /* Increment currently_reading_symtab and return a cleanup that can be
181 used to decrement it. */
183 scoped_restore_tmpl
<int>
184 increment_reading_symtab (void)
186 gdb_assert (currently_reading_symtab
>= 0);
187 return make_scoped_restore (¤tly_reading_symtab
,
188 currently_reading_symtab
+ 1);
191 /* Remember the lowest-addressed loadable section we've seen.
192 This function is called via bfd_map_over_sections.
194 In case of equal vmas, the section with the largest size becomes the
195 lowest-addressed loadable section.
197 If the vmas and sizes are equal, the last section is considered the
198 lowest-addressed loadable section. */
201 find_lowest_section (bfd
*abfd
, asection
*sect
, void *obj
)
203 asection
**lowest
= (asection
**) obj
;
205 if (0 == (bfd_get_section_flags (abfd
, sect
) & (SEC_ALLOC
| SEC_LOAD
)))
208 *lowest
= sect
; /* First loadable section */
209 else if (bfd_section_vma (abfd
, *lowest
) > bfd_section_vma (abfd
, sect
))
210 *lowest
= sect
; /* A lower loadable section */
211 else if (bfd_section_vma (abfd
, *lowest
) == bfd_section_vma (abfd
, sect
)
212 && (bfd_section_size (abfd
, (*lowest
))
213 <= bfd_section_size (abfd
, sect
)))
217 /* Create a new section_addr_info, with room for NUM_SECTIONS. The
218 new object's 'num_sections' field is set to 0; it must be updated
221 struct section_addr_info
*
222 alloc_section_addr_info (size_t num_sections
)
224 struct section_addr_info
*sap
;
227 size
= (sizeof (struct section_addr_info
)
228 + sizeof (struct other_sections
) * (num_sections
- 1));
229 sap
= (struct section_addr_info
*) xmalloc (size
);
230 memset (sap
, 0, size
);
235 /* Build (allocate and populate) a section_addr_info struct from
236 an existing section table. */
238 extern struct section_addr_info
*
239 build_section_addr_info_from_section_table (const struct target_section
*start
,
240 const struct target_section
*end
)
242 struct section_addr_info
*sap
;
243 const struct target_section
*stp
;
246 sap
= alloc_section_addr_info (end
- start
);
248 for (stp
= start
, oidx
= 0; stp
!= end
; stp
++)
250 struct bfd_section
*asect
= stp
->the_bfd_section
;
251 bfd
*abfd
= asect
->owner
;
253 if (bfd_get_section_flags (abfd
, asect
) & (SEC_ALLOC
| SEC_LOAD
)
254 && oidx
< end
- start
)
256 sap
->other
[oidx
].addr
= stp
->addr
;
257 sap
->other
[oidx
].name
= xstrdup (bfd_section_name (abfd
, asect
));
258 sap
->other
[oidx
].sectindex
= gdb_bfd_section_index (abfd
, asect
);
263 sap
->num_sections
= oidx
;
268 /* Create a section_addr_info from section offsets in ABFD. */
270 static struct section_addr_info
*
271 build_section_addr_info_from_bfd (bfd
*abfd
)
273 struct section_addr_info
*sap
;
275 struct bfd_section
*sec
;
277 sap
= alloc_section_addr_info (bfd_count_sections (abfd
));
278 for (i
= 0, sec
= abfd
->sections
; sec
!= NULL
; sec
= sec
->next
)
279 if (bfd_get_section_flags (abfd
, sec
) & (SEC_ALLOC
| SEC_LOAD
))
281 sap
->other
[i
].addr
= bfd_get_section_vma (abfd
, sec
);
282 sap
->other
[i
].name
= xstrdup (bfd_get_section_name (abfd
, sec
));
283 sap
->other
[i
].sectindex
= gdb_bfd_section_index (abfd
, sec
);
287 sap
->num_sections
= i
;
292 /* Create a section_addr_info from section offsets in OBJFILE. */
294 struct section_addr_info
*
295 build_section_addr_info_from_objfile (const struct objfile
*objfile
)
297 struct section_addr_info
*sap
;
300 /* Before reread_symbols gets rewritten it is not safe to call:
301 gdb_assert (objfile->num_sections == bfd_count_sections (objfile->obfd));
303 sap
= build_section_addr_info_from_bfd (objfile
->obfd
);
304 for (i
= 0; i
< sap
->num_sections
; i
++)
306 int sectindex
= sap
->other
[i
].sectindex
;
308 sap
->other
[i
].addr
+= objfile
->section_offsets
->offsets
[sectindex
];
313 /* Free all memory allocated by build_section_addr_info_from_section_table. */
316 free_section_addr_info (struct section_addr_info
*sap
)
320 for (idx
= 0; idx
< sap
->num_sections
; idx
++)
321 xfree (sap
->other
[idx
].name
);
325 /* Initialize OBJFILE's sect_index_* members. */
328 init_objfile_sect_indices (struct objfile
*objfile
)
333 sect
= bfd_get_section_by_name (objfile
->obfd
, ".text");
335 objfile
->sect_index_text
= sect
->index
;
337 sect
= bfd_get_section_by_name (objfile
->obfd
, ".data");
339 objfile
->sect_index_data
= sect
->index
;
341 sect
= bfd_get_section_by_name (objfile
->obfd
, ".bss");
343 objfile
->sect_index_bss
= sect
->index
;
345 sect
= bfd_get_section_by_name (objfile
->obfd
, ".rodata");
347 objfile
->sect_index_rodata
= sect
->index
;
349 /* This is where things get really weird... We MUST have valid
350 indices for the various sect_index_* members or gdb will abort.
351 So if for example, there is no ".text" section, we have to
352 accomodate that. First, check for a file with the standard
353 one or two segments. */
355 symfile_find_segment_sections (objfile
);
357 /* Except when explicitly adding symbol files at some address,
358 section_offsets contains nothing but zeros, so it doesn't matter
359 which slot in section_offsets the individual sect_index_* members
360 index into. So if they are all zero, it is safe to just point
361 all the currently uninitialized indices to the first slot. But
362 beware: if this is the main executable, it may be relocated
363 later, e.g. by the remote qOffsets packet, and then this will
364 be wrong! That's why we try segments first. */
366 for (i
= 0; i
< objfile
->num_sections
; i
++)
368 if (ANOFFSET (objfile
->section_offsets
, i
) != 0)
373 if (i
== objfile
->num_sections
)
375 if (objfile
->sect_index_text
== -1)
376 objfile
->sect_index_text
= 0;
377 if (objfile
->sect_index_data
== -1)
378 objfile
->sect_index_data
= 0;
379 if (objfile
->sect_index_bss
== -1)
380 objfile
->sect_index_bss
= 0;
381 if (objfile
->sect_index_rodata
== -1)
382 objfile
->sect_index_rodata
= 0;
386 /* The arguments to place_section. */
388 struct place_section_arg
390 struct section_offsets
*offsets
;
394 /* Find a unique offset to use for loadable section SECT if
395 the user did not provide an offset. */
398 place_section (bfd
*abfd
, asection
*sect
, void *obj
)
400 struct place_section_arg
*arg
= (struct place_section_arg
*) obj
;
401 CORE_ADDR
*offsets
= arg
->offsets
->offsets
, start_addr
;
403 ULONGEST align
= ((ULONGEST
) 1) << bfd_get_section_alignment (abfd
, sect
);
405 /* We are only interested in allocated sections. */
406 if ((bfd_get_section_flags (abfd
, sect
) & SEC_ALLOC
) == 0)
409 /* If the user specified an offset, honor it. */
410 if (offsets
[gdb_bfd_section_index (abfd
, sect
)] != 0)
413 /* Otherwise, let's try to find a place for the section. */
414 start_addr
= (arg
->lowest
+ align
- 1) & -align
;
421 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
; cur_sec
= cur_sec
->next
)
423 int indx
= cur_sec
->index
;
425 /* We don't need to compare against ourself. */
429 /* We can only conflict with allocated sections. */
430 if ((bfd_get_section_flags (abfd
, cur_sec
) & SEC_ALLOC
) == 0)
433 /* If the section offset is 0, either the section has not been placed
434 yet, or it was the lowest section placed (in which case LOWEST
435 will be past its end). */
436 if (offsets
[indx
] == 0)
439 /* If this section would overlap us, then we must move up. */
440 if (start_addr
+ bfd_get_section_size (sect
) > offsets
[indx
]
441 && start_addr
< offsets
[indx
] + bfd_get_section_size (cur_sec
))
443 start_addr
= offsets
[indx
] + bfd_get_section_size (cur_sec
);
444 start_addr
= (start_addr
+ align
- 1) & -align
;
449 /* Otherwise, we appear to be OK. So far. */
454 offsets
[gdb_bfd_section_index (abfd
, sect
)] = start_addr
;
455 arg
->lowest
= start_addr
+ bfd_get_section_size (sect
);
458 /* Store struct section_addr_info as prepared (made relative and with SECTINDEX
459 filled-in) by addr_info_make_relative into SECTION_OFFSETS of NUM_SECTIONS
463 relative_addr_info_to_section_offsets (struct section_offsets
*section_offsets
,
465 const struct section_addr_info
*addrs
)
469 memset (section_offsets
, 0, SIZEOF_N_SECTION_OFFSETS (num_sections
));
471 /* Now calculate offsets for section that were specified by the caller. */
472 for (i
= 0; i
< addrs
->num_sections
; i
++)
474 const struct other_sections
*osp
;
476 osp
= &addrs
->other
[i
];
477 if (osp
->sectindex
== -1)
480 /* Record all sections in offsets. */
481 /* The section_offsets in the objfile are here filled in using
483 section_offsets
->offsets
[osp
->sectindex
] = osp
->addr
;
487 /* Transform section name S for a name comparison. prelink can split section
488 `.bss' into two sections `.dynbss' and `.bss' (in this order). Similarly
489 prelink can split `.sbss' into `.sdynbss' and `.sbss'. Use virtual address
490 of the new `.dynbss' (`.sdynbss') section as the adjacent new `.bss'
491 (`.sbss') section has invalid (increased) virtual address. */
494 addr_section_name (const char *s
)
496 if (strcmp (s
, ".dynbss") == 0)
498 if (strcmp (s
, ".sdynbss") == 0)
504 /* qsort comparator for addrs_section_sort. Sort entries in ascending order by
505 their (name, sectindex) pair. sectindex makes the sort by name stable. */
508 addrs_section_compar (const void *ap
, const void *bp
)
510 const struct other_sections
*a
= *((struct other_sections
**) ap
);
511 const struct other_sections
*b
= *((struct other_sections
**) bp
);
514 retval
= strcmp (addr_section_name (a
->name
), addr_section_name (b
->name
));
518 return a
->sectindex
- b
->sectindex
;
521 /* Provide sorted array of pointers to sections of ADDRS. The array is
522 terminated by NULL. Caller is responsible to call xfree for it. */
524 static struct other_sections
**
525 addrs_section_sort (struct section_addr_info
*addrs
)
527 struct other_sections
**array
;
530 /* `+ 1' for the NULL terminator. */
531 array
= XNEWVEC (struct other_sections
*, addrs
->num_sections
+ 1);
532 for (i
= 0; i
< addrs
->num_sections
; i
++)
533 array
[i
] = &addrs
->other
[i
];
536 qsort (array
, i
, sizeof (*array
), addrs_section_compar
);
541 /* Relativize absolute addresses in ADDRS into offsets based on ABFD. Fill-in
542 also SECTINDEXes specific to ABFD there. This function can be used to
543 rebase ADDRS to start referencing different BFD than before. */
546 addr_info_make_relative (struct section_addr_info
*addrs
, bfd
*abfd
)
548 asection
*lower_sect
;
549 CORE_ADDR lower_offset
;
551 struct cleanup
*my_cleanup
;
552 struct section_addr_info
*abfd_addrs
;
553 struct other_sections
**addrs_sorted
, **abfd_addrs_sorted
;
554 struct other_sections
**addrs_to_abfd_addrs
;
556 /* Find lowest loadable section to be used as starting point for
557 continguous sections. */
559 bfd_map_over_sections (abfd
, find_lowest_section
, &lower_sect
);
560 if (lower_sect
== NULL
)
562 warning (_("no loadable sections found in added symbol-file %s"),
563 bfd_get_filename (abfd
));
567 lower_offset
= bfd_section_vma (bfd_get_filename (abfd
), lower_sect
);
569 /* Create ADDRS_TO_ABFD_ADDRS array to map the sections in ADDRS to sections
570 in ABFD. Section names are not unique - there can be multiple sections of
571 the same name. Also the sections of the same name do not have to be
572 adjacent to each other. Some sections may be present only in one of the
573 files. Even sections present in both files do not have to be in the same
576 Use stable sort by name for the sections in both files. Then linearly
577 scan both lists matching as most of the entries as possible. */
579 addrs_sorted
= addrs_section_sort (addrs
);
580 my_cleanup
= make_cleanup (xfree
, addrs_sorted
);
582 abfd_addrs
= build_section_addr_info_from_bfd (abfd
);
583 make_cleanup_free_section_addr_info (abfd_addrs
);
584 abfd_addrs_sorted
= addrs_section_sort (abfd_addrs
);
585 make_cleanup (xfree
, abfd_addrs_sorted
);
587 /* Now create ADDRS_TO_ABFD_ADDRS from ADDRS_SORTED and
588 ABFD_ADDRS_SORTED. */
590 addrs_to_abfd_addrs
= XCNEWVEC (struct other_sections
*, addrs
->num_sections
);
591 make_cleanup (xfree
, addrs_to_abfd_addrs
);
593 while (*addrs_sorted
)
595 const char *sect_name
= addr_section_name ((*addrs_sorted
)->name
);
597 while (*abfd_addrs_sorted
598 && strcmp (addr_section_name ((*abfd_addrs_sorted
)->name
),
602 if (*abfd_addrs_sorted
603 && strcmp (addr_section_name ((*abfd_addrs_sorted
)->name
),
608 /* Make the found item directly addressable from ADDRS. */
609 index_in_addrs
= *addrs_sorted
- addrs
->other
;
610 gdb_assert (addrs_to_abfd_addrs
[index_in_addrs
] == NULL
);
611 addrs_to_abfd_addrs
[index_in_addrs
] = *abfd_addrs_sorted
;
613 /* Never use the same ABFD entry twice. */
620 /* Calculate offsets for the loadable sections.
621 FIXME! Sections must be in order of increasing loadable section
622 so that contiguous sections can use the lower-offset!!!
624 Adjust offsets if the segments are not contiguous.
625 If the section is contiguous, its offset should be set to
626 the offset of the highest loadable section lower than it
627 (the loadable section directly below it in memory).
628 this_offset = lower_offset = lower_addr - lower_orig_addr */
630 for (i
= 0; i
< addrs
->num_sections
; i
++)
632 struct other_sections
*sect
= addrs_to_abfd_addrs
[i
];
636 /* This is the index used by BFD. */
637 addrs
->other
[i
].sectindex
= sect
->sectindex
;
639 if (addrs
->other
[i
].addr
!= 0)
641 addrs
->other
[i
].addr
-= sect
->addr
;
642 lower_offset
= addrs
->other
[i
].addr
;
645 addrs
->other
[i
].addr
= lower_offset
;
649 /* addr_section_name transformation is not used for SECT_NAME. */
650 const char *sect_name
= addrs
->other
[i
].name
;
652 /* This section does not exist in ABFD, which is normally
653 unexpected and we want to issue a warning.
655 However, the ELF prelinker does create a few sections which are
656 marked in the main executable as loadable (they are loaded in
657 memory from the DYNAMIC segment) and yet are not present in
658 separate debug info files. This is fine, and should not cause
659 a warning. Shared libraries contain just the section
660 ".gnu.liblist" but it is not marked as loadable there. There is
661 no other way to identify them than by their name as the sections
662 created by prelink have no special flags.
664 For the sections `.bss' and `.sbss' see addr_section_name. */
666 if (!(strcmp (sect_name
, ".gnu.liblist") == 0
667 || strcmp (sect_name
, ".gnu.conflict") == 0
668 || (strcmp (sect_name
, ".bss") == 0
670 && strcmp (addrs
->other
[i
- 1].name
, ".dynbss") == 0
671 && addrs_to_abfd_addrs
[i
- 1] != NULL
)
672 || (strcmp (sect_name
, ".sbss") == 0
674 && strcmp (addrs
->other
[i
- 1].name
, ".sdynbss") == 0
675 && addrs_to_abfd_addrs
[i
- 1] != NULL
)))
676 warning (_("section %s not found in %s"), sect_name
,
677 bfd_get_filename (abfd
));
679 addrs
->other
[i
].addr
= 0;
680 addrs
->other
[i
].sectindex
= -1;
684 do_cleanups (my_cleanup
);
687 /* Parse the user's idea of an offset for dynamic linking, into our idea
688 of how to represent it for fast symbol reading. This is the default
689 version of the sym_fns.sym_offsets function for symbol readers that
690 don't need to do anything special. It allocates a section_offsets table
691 for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
694 default_symfile_offsets (struct objfile
*objfile
,
695 const struct section_addr_info
*addrs
)
697 objfile
->num_sections
= gdb_bfd_count_sections (objfile
->obfd
);
698 objfile
->section_offsets
= (struct section_offsets
*)
699 obstack_alloc (&objfile
->objfile_obstack
,
700 SIZEOF_N_SECTION_OFFSETS (objfile
->num_sections
));
701 relative_addr_info_to_section_offsets (objfile
->section_offsets
,
702 objfile
->num_sections
, addrs
);
704 /* For relocatable files, all loadable sections will start at zero.
705 The zero is meaningless, so try to pick arbitrary addresses such
706 that no loadable sections overlap. This algorithm is quadratic,
707 but the number of sections in a single object file is generally
709 if ((bfd_get_file_flags (objfile
->obfd
) & (EXEC_P
| DYNAMIC
)) == 0)
711 struct place_section_arg arg
;
712 bfd
*abfd
= objfile
->obfd
;
715 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
; cur_sec
= cur_sec
->next
)
716 /* We do not expect this to happen; just skip this step if the
717 relocatable file has a section with an assigned VMA. */
718 if (bfd_section_vma (abfd
, cur_sec
) != 0)
723 CORE_ADDR
*offsets
= objfile
->section_offsets
->offsets
;
725 /* Pick non-overlapping offsets for sections the user did not
727 arg
.offsets
= objfile
->section_offsets
;
729 bfd_map_over_sections (objfile
->obfd
, place_section
, &arg
);
731 /* Correctly filling in the section offsets is not quite
732 enough. Relocatable files have two properties that
733 (most) shared objects do not:
735 - Their debug information will contain relocations. Some
736 shared libraries do also, but many do not, so this can not
739 - If there are multiple code sections they will be loaded
740 at different relative addresses in memory than they are
741 in the objfile, since all sections in the file will start
744 Because GDB has very limited ability to map from an
745 address in debug info to the correct code section,
746 it relies on adding SECT_OFF_TEXT to things which might be
747 code. If we clear all the section offsets, and set the
748 section VMAs instead, then symfile_relocate_debug_section
749 will return meaningful debug information pointing at the
752 GDB has too many different data structures for section
753 addresses - a bfd, objfile, and so_list all have section
754 tables, as does exec_ops. Some of these could probably
757 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
;
758 cur_sec
= cur_sec
->next
)
760 if ((bfd_get_section_flags (abfd
, cur_sec
) & SEC_ALLOC
) == 0)
763 bfd_set_section_vma (abfd
, cur_sec
, offsets
[cur_sec
->index
]);
764 exec_set_section_address (bfd_get_filename (abfd
),
766 offsets
[cur_sec
->index
]);
767 offsets
[cur_sec
->index
] = 0;
772 /* Remember the bfd indexes for the .text, .data, .bss and
774 init_objfile_sect_indices (objfile
);
777 /* Divide the file into segments, which are individual relocatable units.
778 This is the default version of the sym_fns.sym_segments function for
779 symbol readers that do not have an explicit representation of segments.
780 It assumes that object files do not have segments, and fully linked
781 files have a single segment. */
783 struct symfile_segment_data
*
784 default_symfile_segments (bfd
*abfd
)
788 struct symfile_segment_data
*data
;
791 /* Relocatable files contain enough information to position each
792 loadable section independently; they should not be relocated
794 if ((bfd_get_file_flags (abfd
) & (EXEC_P
| DYNAMIC
)) == 0)
797 /* Make sure there is at least one loadable section in the file. */
798 for (sect
= abfd
->sections
; sect
!= NULL
; sect
= sect
->next
)
800 if ((bfd_get_section_flags (abfd
, sect
) & SEC_ALLOC
) == 0)
808 low
= bfd_get_section_vma (abfd
, sect
);
809 high
= low
+ bfd_get_section_size (sect
);
811 data
= XCNEW (struct symfile_segment_data
);
812 data
->num_segments
= 1;
813 data
->segment_bases
= XCNEW (CORE_ADDR
);
814 data
->segment_sizes
= XCNEW (CORE_ADDR
);
816 num_sections
= bfd_count_sections (abfd
);
817 data
->segment_info
= XCNEWVEC (int, num_sections
);
819 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
823 if ((bfd_get_section_flags (abfd
, sect
) & SEC_ALLOC
) == 0)
826 vma
= bfd_get_section_vma (abfd
, sect
);
829 if (vma
+ bfd_get_section_size (sect
) > high
)
830 high
= vma
+ bfd_get_section_size (sect
);
832 data
->segment_info
[i
] = 1;
835 data
->segment_bases
[0] = low
;
836 data
->segment_sizes
[0] = high
- low
;
841 /* This is a convenience function to call sym_read for OBJFILE and
842 possibly force the partial symbols to be read. */
845 read_symbols (struct objfile
*objfile
, symfile_add_flags add_flags
)
847 (*objfile
->sf
->sym_read
) (objfile
, add_flags
);
848 objfile
->per_bfd
->minsyms_read
= true;
850 /* find_separate_debug_file_in_section should be called only if there is
851 single binary with no existing separate debug info file. */
852 if (!objfile_has_partial_symbols (objfile
)
853 && objfile
->separate_debug_objfile
== NULL
854 && objfile
->separate_debug_objfile_backlink
== NULL
)
856 gdb_bfd_ref_ptr
abfd (find_separate_debug_file_in_section (objfile
));
860 /* find_separate_debug_file_in_section uses the same filename for the
861 virtual section-as-bfd like the bfd filename containing the
862 section. Therefore use also non-canonical name form for the same
863 file containing the section. */
864 symbol_file_add_separate (abfd
.get (), objfile
->original_name
,
868 if ((add_flags
& SYMFILE_NO_READ
) == 0)
869 require_partial_symbols (objfile
, 0);
872 /* Initialize entry point information for this objfile. */
875 init_entry_point_info (struct objfile
*objfile
)
877 struct entry_info
*ei
= &objfile
->per_bfd
->ei
;
883 /* Save startup file's range of PC addresses to help blockframe.c
884 decide where the bottom of the stack is. */
886 if (bfd_get_file_flags (objfile
->obfd
) & EXEC_P
)
888 /* Executable file -- record its entry point so we'll recognize
889 the startup file because it contains the entry point. */
890 ei
->entry_point
= bfd_get_start_address (objfile
->obfd
);
891 ei
->entry_point_p
= 1;
893 else if (bfd_get_file_flags (objfile
->obfd
) & DYNAMIC
894 && bfd_get_start_address (objfile
->obfd
) != 0)
896 /* Some shared libraries may have entry points set and be
897 runnable. There's no clear way to indicate this, so just check
898 for values other than zero. */
899 ei
->entry_point
= bfd_get_start_address (objfile
->obfd
);
900 ei
->entry_point_p
= 1;
904 /* Examination of non-executable.o files. Short-circuit this stuff. */
905 ei
->entry_point_p
= 0;
908 if (ei
->entry_point_p
)
910 struct obj_section
*osect
;
911 CORE_ADDR entry_point
= ei
->entry_point
;
914 /* Make certain that the address points at real code, and not a
915 function descriptor. */
917 = gdbarch_convert_from_func_ptr_addr (get_objfile_arch (objfile
),
921 /* Remove any ISA markers, so that this matches entries in the
924 = gdbarch_addr_bits_remove (get_objfile_arch (objfile
), entry_point
);
927 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
929 struct bfd_section
*sect
= osect
->the_bfd_section
;
931 if (entry_point
>= bfd_get_section_vma (objfile
->obfd
, sect
)
932 && entry_point
< (bfd_get_section_vma (objfile
->obfd
, sect
)
933 + bfd_get_section_size (sect
)))
935 ei
->the_bfd_section_index
936 = gdb_bfd_section_index (objfile
->obfd
, sect
);
943 ei
->the_bfd_section_index
= SECT_OFF_TEXT (objfile
);
947 /* Process a symbol file, as either the main file or as a dynamically
950 This function does not set the OBJFILE's entry-point info.
952 OBJFILE is where the symbols are to be read from.
954 ADDRS is the list of section load addresses. If the user has given
955 an 'add-symbol-file' command, then this is the list of offsets and
956 addresses he or she provided as arguments to the command; or, if
957 we're handling a shared library, these are the actual addresses the
958 sections are loaded at, according to the inferior's dynamic linker
959 (as gleaned by GDB's shared library code). We convert each address
960 into an offset from the section VMA's as it appears in the object
961 file, and then call the file's sym_offsets function to convert this
962 into a format-specific offset table --- a `struct section_offsets'.
964 ADD_FLAGS encodes verbosity level, whether this is main symbol or
965 an extra symbol file such as dynamically loaded code, and wether
966 breakpoint reset should be deferred. */
969 syms_from_objfile_1 (struct objfile
*objfile
,
970 struct section_addr_info
*addrs
,
971 symfile_add_flags add_flags
)
973 struct section_addr_info
*local_addr
= NULL
;
974 struct cleanup
*old_chain
;
975 const int mainline
= add_flags
& SYMFILE_MAINLINE
;
977 objfile_set_sym_fns (objfile
, find_sym_fns (objfile
->obfd
));
979 if (objfile
->sf
== NULL
)
981 /* No symbols to load, but we still need to make sure
982 that the section_offsets table is allocated. */
983 int num_sections
= gdb_bfd_count_sections (objfile
->obfd
);
984 size_t size
= SIZEOF_N_SECTION_OFFSETS (num_sections
);
986 objfile
->num_sections
= num_sections
;
987 objfile
->section_offsets
988 = (struct section_offsets
*) obstack_alloc (&objfile
->objfile_obstack
,
990 memset (objfile
->section_offsets
, 0, size
);
994 /* Make sure that partially constructed symbol tables will be cleaned up
995 if an error occurs during symbol reading. */
996 old_chain
= make_cleanup (null_cleanup
, NULL
);
997 std::unique_ptr
<struct objfile
> objfile_holder (objfile
);
999 /* If ADDRS is NULL, put together a dummy address list.
1000 We now establish the convention that an addr of zero means
1001 no load address was specified. */
1004 local_addr
= alloc_section_addr_info (1);
1005 make_cleanup (xfree
, local_addr
);
1011 /* We will modify the main symbol table, make sure that all its users
1012 will be cleaned up if an error occurs during symbol reading. */
1013 make_cleanup (clear_symtab_users_cleanup
, 0 /*ignore*/);
1015 /* Since no error yet, throw away the old symbol table. */
1017 if (symfile_objfile
!= NULL
)
1019 delete symfile_objfile
;
1020 gdb_assert (symfile_objfile
== NULL
);
1023 /* Currently we keep symbols from the add-symbol-file command.
1024 If the user wants to get rid of them, they should do "symbol-file"
1025 without arguments first. Not sure this is the best behavior
1028 (*objfile
->sf
->sym_new_init
) (objfile
);
1031 /* Convert addr into an offset rather than an absolute address.
1032 We find the lowest address of a loaded segment in the objfile,
1033 and assume that <addr> is where that got loaded.
1035 We no longer warn if the lowest section is not a text segment (as
1036 happens for the PA64 port. */
1037 if (addrs
->num_sections
> 0)
1038 addr_info_make_relative (addrs
, objfile
->obfd
);
1040 /* Initialize symbol reading routines for this objfile, allow complaints to
1041 appear for this new file, and record how verbose to be, then do the
1042 initial symbol reading for this file. */
1044 (*objfile
->sf
->sym_init
) (objfile
);
1045 clear_complaints (&symfile_complaints
, 1, add_flags
& SYMFILE_VERBOSE
);
1047 (*objfile
->sf
->sym_offsets
) (objfile
, addrs
);
1049 read_symbols (objfile
, add_flags
);
1051 /* Discard cleanups as symbol reading was successful. */
1053 objfile_holder
.release ();
1054 discard_cleanups (old_chain
);
1058 /* Same as syms_from_objfile_1, but also initializes the objfile
1059 entry-point info. */
1062 syms_from_objfile (struct objfile
*objfile
,
1063 struct section_addr_info
*addrs
,
1064 symfile_add_flags add_flags
)
1066 syms_from_objfile_1 (objfile
, addrs
, add_flags
);
1067 init_entry_point_info (objfile
);
1070 /* Perform required actions after either reading in the initial
1071 symbols for a new objfile, or mapping in the symbols from a reusable
1072 objfile. ADD_FLAGS is a bitmask of enum symfile_add_flags. */
1075 finish_new_objfile (struct objfile
*objfile
, symfile_add_flags add_flags
)
1077 /* If this is the main symbol file we have to clean up all users of the
1078 old main symbol file. Otherwise it is sufficient to fixup all the
1079 breakpoints that may have been redefined by this symbol file. */
1080 if (add_flags
& SYMFILE_MAINLINE
)
1082 /* OK, make it the "real" symbol file. */
1083 symfile_objfile
= objfile
;
1085 clear_symtab_users (add_flags
);
1087 else if ((add_flags
& SYMFILE_DEFER_BP_RESET
) == 0)
1089 breakpoint_re_set ();
1092 /* We're done reading the symbol file; finish off complaints. */
1093 clear_complaints (&symfile_complaints
, 0, add_flags
& SYMFILE_VERBOSE
);
1096 /* Process a symbol file, as either the main file or as a dynamically
1099 ABFD is a BFD already open on the file, as from symfile_bfd_open.
1100 A new reference is acquired by this function.
1102 For NAME description see the objfile constructor.
1104 ADD_FLAGS encodes verbosity, whether this is main symbol file or
1105 extra, such as dynamically loaded code, and what to do with breakpoins.
1107 ADDRS is as described for syms_from_objfile_1, above.
1108 ADDRS is ignored when SYMFILE_MAINLINE bit is set in ADD_FLAGS.
1110 PARENT is the original objfile if ABFD is a separate debug info file.
1111 Otherwise PARENT is NULL.
1113 Upon success, returns a pointer to the objfile that was added.
1114 Upon failure, jumps back to command level (never returns). */
1116 static struct objfile
*
1117 symbol_file_add_with_addrs (bfd
*abfd
, const char *name
,
1118 symfile_add_flags add_flags
,
1119 struct section_addr_info
*addrs
,
1120 objfile_flags flags
, struct objfile
*parent
)
1122 struct objfile
*objfile
;
1123 const int from_tty
= add_flags
& SYMFILE_VERBOSE
;
1124 const int mainline
= add_flags
& SYMFILE_MAINLINE
;
1125 const int should_print
= (print_symbol_loading_p (from_tty
, mainline
, 1)
1126 && (readnow_symbol_files
1127 || (add_flags
& SYMFILE_NO_READ
) == 0));
1129 if (readnow_symbol_files
)
1131 flags
|= OBJF_READNOW
;
1132 add_flags
&= ~SYMFILE_NO_READ
;
1135 /* Give user a chance to burp if we'd be
1136 interactively wiping out any existing symbols. */
1138 if ((have_full_symbols () || have_partial_symbols ())
1141 && !query (_("Load new symbol table from \"%s\"? "), name
))
1142 error (_("Not confirmed."));
1145 flags
|= OBJF_MAINLINE
;
1146 objfile
= new struct objfile (abfd
, name
, flags
);
1149 add_separate_debug_objfile (objfile
, parent
);
1151 /* We either created a new mapped symbol table, mapped an existing
1152 symbol table file which has not had initial symbol reading
1153 performed, or need to read an unmapped symbol table. */
1156 if (deprecated_pre_add_symbol_hook
)
1157 deprecated_pre_add_symbol_hook (name
);
1160 printf_unfiltered (_("Reading symbols from %s..."), name
);
1162 gdb_flush (gdb_stdout
);
1165 syms_from_objfile (objfile
, addrs
, add_flags
);
1167 /* We now have at least a partial symbol table. Check to see if the
1168 user requested that all symbols be read on initial access via either
1169 the gdb startup command line or on a per symbol file basis. Expand
1170 all partial symbol tables for this objfile if so. */
1172 if ((flags
& OBJF_READNOW
))
1176 printf_unfiltered (_("expanding to full symbols..."));
1178 gdb_flush (gdb_stdout
);
1182 objfile
->sf
->qf
->expand_all_symtabs (objfile
);
1185 if (should_print
&& !objfile_has_symbols (objfile
))
1188 printf_unfiltered (_("(no debugging symbols found)..."));
1194 if (deprecated_post_add_symbol_hook
)
1195 deprecated_post_add_symbol_hook ();
1197 printf_unfiltered (_("done.\n"));
1200 /* We print some messages regardless of whether 'from_tty ||
1201 info_verbose' is true, so make sure they go out at the right
1203 gdb_flush (gdb_stdout
);
1205 if (objfile
->sf
== NULL
)
1207 observer_notify_new_objfile (objfile
);
1208 return objfile
; /* No symbols. */
1211 finish_new_objfile (objfile
, add_flags
);
1213 observer_notify_new_objfile (objfile
);
1215 bfd_cache_close_all ();
1219 /* Add BFD as a separate debug file for OBJFILE. For NAME description
1220 see the objfile constructor. */
1223 symbol_file_add_separate (bfd
*bfd
, const char *name
,
1224 symfile_add_flags symfile_flags
,
1225 struct objfile
*objfile
)
1227 struct section_addr_info
*sap
;
1228 struct cleanup
*my_cleanup
;
1230 /* Create section_addr_info. We can't directly use offsets from OBJFILE
1231 because sections of BFD may not match sections of OBJFILE and because
1232 vma may have been modified by tools such as prelink. */
1233 sap
= build_section_addr_info_from_objfile (objfile
);
1234 my_cleanup
= make_cleanup_free_section_addr_info (sap
);
1236 symbol_file_add_with_addrs
1237 (bfd
, name
, symfile_flags
, sap
,
1238 objfile
->flags
& (OBJF_REORDERED
| OBJF_SHARED
| OBJF_READNOW
1242 do_cleanups (my_cleanup
);
1245 /* Process the symbol file ABFD, as either the main file or as a
1246 dynamically loaded file.
1247 See symbol_file_add_with_addrs's comments for details. */
1250 symbol_file_add_from_bfd (bfd
*abfd
, const char *name
,
1251 symfile_add_flags add_flags
,
1252 struct section_addr_info
*addrs
,
1253 objfile_flags flags
, struct objfile
*parent
)
1255 return symbol_file_add_with_addrs (abfd
, name
, add_flags
, addrs
, flags
,
1259 /* Process a symbol file, as either the main file or as a dynamically
1260 loaded file. See symbol_file_add_with_addrs's comments for details. */
1263 symbol_file_add (const char *name
, symfile_add_flags add_flags
,
1264 struct section_addr_info
*addrs
, objfile_flags flags
)
1266 gdb_bfd_ref_ptr
bfd (symfile_bfd_open (name
));
1268 return symbol_file_add_from_bfd (bfd
.get (), name
, add_flags
, addrs
,
1272 /* Call symbol_file_add() with default values and update whatever is
1273 affected by the loading of a new main().
1274 Used when the file is supplied in the gdb command line
1275 and by some targets with special loading requirements.
1276 The auxiliary function, symbol_file_add_main_1(), has the flags
1277 argument for the switches that can only be specified in the symbol_file
1281 symbol_file_add_main (const char *args
, symfile_add_flags add_flags
)
1283 symbol_file_add_main_1 (args
, add_flags
, 0);
1287 symbol_file_add_main_1 (const char *args
, symfile_add_flags add_flags
,
1288 objfile_flags flags
)
1290 add_flags
|= current_inferior ()->symfile_flags
| SYMFILE_MAINLINE
;
1292 symbol_file_add (args
, add_flags
, NULL
, flags
);
1294 /* Getting new symbols may change our opinion about
1295 what is frameless. */
1296 reinit_frame_cache ();
1298 if ((add_flags
& SYMFILE_NO_READ
) == 0)
1299 set_initial_language ();
1303 symbol_file_clear (int from_tty
)
1305 if ((have_full_symbols () || have_partial_symbols ())
1308 ? !query (_("Discard symbol table from `%s'? "),
1309 objfile_name (symfile_objfile
))
1310 : !query (_("Discard symbol table? "))))
1311 error (_("Not confirmed."));
1313 /* solib descriptors may have handles to objfiles. Wipe them before their
1314 objfiles get stale by free_all_objfiles. */
1315 no_shared_libraries (NULL
, from_tty
);
1317 free_all_objfiles ();
1319 gdb_assert (symfile_objfile
== NULL
);
1321 printf_unfiltered (_("No symbol file now.\n"));
1324 /* See symfile.h. */
1326 int separate_debug_file_debug
= 0;
1329 separate_debug_file_exists (const char *name
, unsigned long crc
,
1330 struct objfile
*parent_objfile
)
1332 unsigned long file_crc
;
1334 struct stat parent_stat
, abfd_stat
;
1335 int verified_as_different
;
1337 /* Find a separate debug info file as if symbols would be present in
1338 PARENT_OBJFILE itself this function would not be called. .gnu_debuglink
1339 section can contain just the basename of PARENT_OBJFILE without any
1340 ".debug" suffix as "/usr/lib/debug/path/to/file" is a separate tree where
1341 the separate debug infos with the same basename can exist. */
1343 if (filename_cmp (name
, objfile_name (parent_objfile
)) == 0)
1346 if (separate_debug_file_debug
)
1347 printf_unfiltered (_(" Trying %s\n"), name
);
1349 gdb_bfd_ref_ptr
abfd (gdb_bfd_open (name
, gnutarget
, -1));
1354 /* Verify symlinks were not the cause of filename_cmp name difference above.
1356 Some operating systems, e.g. Windows, do not provide a meaningful
1357 st_ino; they always set it to zero. (Windows does provide a
1358 meaningful st_dev.) Files accessed from gdbservers that do not
1359 support the vFile:fstat packet will also have st_ino set to zero.
1360 Do not indicate a duplicate library in either case. While there
1361 is no guarantee that a system that provides meaningful inode
1362 numbers will never set st_ino to zero, this is merely an
1363 optimization, so we do not need to worry about false negatives. */
1365 if (bfd_stat (abfd
.get (), &abfd_stat
) == 0
1366 && abfd_stat
.st_ino
!= 0
1367 && bfd_stat (parent_objfile
->obfd
, &parent_stat
) == 0)
1369 if (abfd_stat
.st_dev
== parent_stat
.st_dev
1370 && abfd_stat
.st_ino
== parent_stat
.st_ino
)
1372 verified_as_different
= 1;
1375 verified_as_different
= 0;
1377 file_crc_p
= gdb_bfd_crc (abfd
.get (), &file_crc
);
1382 if (crc
!= file_crc
)
1384 unsigned long parent_crc
;
1386 /* If the files could not be verified as different with
1387 bfd_stat then we need to calculate the parent's CRC
1388 to verify whether the files are different or not. */
1390 if (!verified_as_different
)
1392 if (!gdb_bfd_crc (parent_objfile
->obfd
, &parent_crc
))
1396 if (verified_as_different
|| parent_crc
!= file_crc
)
1397 warning (_("the debug information found in \"%s\""
1398 " does not match \"%s\" (CRC mismatch).\n"),
1399 name
, objfile_name (parent_objfile
));
1407 char *debug_file_directory
= NULL
;
1409 show_debug_file_directory (struct ui_file
*file
, int from_tty
,
1410 struct cmd_list_element
*c
, const char *value
)
1412 fprintf_filtered (file
,
1413 _("The directory where separate debug "
1414 "symbols are searched for is \"%s\".\n"),
1418 #if ! defined (DEBUG_SUBDIRECTORY)
1419 #define DEBUG_SUBDIRECTORY ".debug"
1422 /* Find a separate debuginfo file for OBJFILE, using DIR as the directory
1423 where the original file resides (may not be the same as
1424 dirname(objfile->name) due to symlinks), and DEBUGLINK as the file we are
1425 looking for. CANON_DIR is the "realpath" form of DIR.
1426 DIR must contain a trailing '/'.
1427 Returns the path of the file with separate debug info, of NULL. */
1430 find_separate_debug_file (const char *dir
,
1431 const char *canon_dir
,
1432 const char *debuglink
,
1433 unsigned long crc32
, struct objfile
*objfile
)
1438 VEC (char_ptr
) *debugdir_vec
;
1439 struct cleanup
*back_to
;
1442 if (separate_debug_file_debug
)
1443 printf_unfiltered (_("\nLooking for separate debug info (debug link) for "
1444 "%s\n"), objfile_name (objfile
));
1446 /* Set I to std::max (strlen (canon_dir), strlen (dir)). */
1448 if (canon_dir
!= NULL
&& strlen (canon_dir
) > i
)
1449 i
= strlen (canon_dir
);
1452 = (char *) xmalloc (strlen (debug_file_directory
) + 1
1454 + strlen (DEBUG_SUBDIRECTORY
)
1456 + strlen (debuglink
)
1459 /* First try in the same directory as the original file. */
1460 strcpy (debugfile
, dir
);
1461 strcat (debugfile
, debuglink
);
1463 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1466 /* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
1467 strcpy (debugfile
, dir
);
1468 strcat (debugfile
, DEBUG_SUBDIRECTORY
);
1469 strcat (debugfile
, "/");
1470 strcat (debugfile
, debuglink
);
1472 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1475 /* Then try in the global debugfile directories.
1477 Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
1478 cause "/..." lookups. */
1480 debugdir_vec
= dirnames_to_char_ptr_vec (debug_file_directory
);
1481 back_to
= make_cleanup_free_char_ptr_vec (debugdir_vec
);
1483 for (ix
= 0; VEC_iterate (char_ptr
, debugdir_vec
, ix
, debugdir
); ++ix
)
1485 strcpy (debugfile
, debugdir
);
1486 strcat (debugfile
, "/");
1487 strcat (debugfile
, dir
);
1488 strcat (debugfile
, debuglink
);
1490 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1492 do_cleanups (back_to
);
1496 /* If the file is in the sysroot, try using its base path in the
1497 global debugfile directory. */
1498 if (canon_dir
!= NULL
1499 && filename_ncmp (canon_dir
, gdb_sysroot
,
1500 strlen (gdb_sysroot
)) == 0
1501 && IS_DIR_SEPARATOR (canon_dir
[strlen (gdb_sysroot
)]))
1503 strcpy (debugfile
, debugdir
);
1504 strcat (debugfile
, canon_dir
+ strlen (gdb_sysroot
));
1505 strcat (debugfile
, "/");
1506 strcat (debugfile
, debuglink
);
1508 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1510 do_cleanups (back_to
);
1516 do_cleanups (back_to
);
1521 /* Modify PATH to contain only "[/]directory/" part of PATH.
1522 If there were no directory separators in PATH, PATH will be empty
1523 string on return. */
1526 terminate_after_last_dir_separator (char *path
)
1530 /* Strip off the final filename part, leaving the directory name,
1531 followed by a slash. The directory can be relative or absolute. */
1532 for (i
= strlen(path
) - 1; i
>= 0; i
--)
1533 if (IS_DIR_SEPARATOR (path
[i
]))
1536 /* If I is -1 then no directory is present there and DIR will be "". */
1540 /* Find separate debuginfo for OBJFILE (using .gnu_debuglink section).
1541 Returns pathname, or NULL. */
1544 find_separate_debug_file_by_debuglink (struct objfile
*objfile
)
1547 unsigned long crc32
;
1549 gdb::unique_xmalloc_ptr
<char> debuglink
1550 (bfd_get_debug_link_info (objfile
->obfd
, &crc32
));
1552 if (debuglink
== NULL
)
1554 /* There's no separate debug info, hence there's no way we could
1555 load it => no warning. */
1559 std::string dir
= objfile_name (objfile
);
1560 terminate_after_last_dir_separator (&dir
[0]);
1561 gdb::unique_xmalloc_ptr
<char> canon_dir (lrealpath (dir
.c_str ()));
1563 debugfile
= find_separate_debug_file (dir
.c_str (), canon_dir
.get (),
1564 debuglink
.get (), crc32
, objfile
);
1566 if (debugfile
== NULL
)
1568 /* For PR gdb/9538, try again with realpath (if different from the
1573 if (lstat (objfile_name (objfile
), &st_buf
) == 0
1574 && S_ISLNK (st_buf
.st_mode
))
1576 gdb::unique_xmalloc_ptr
<char> symlink_dir
1577 (lrealpath (objfile_name (objfile
)));
1578 if (symlink_dir
!= NULL
)
1580 terminate_after_last_dir_separator (symlink_dir
.get ());
1581 if (dir
!= symlink_dir
.get ())
1583 /* Different directory, so try using it. */
1584 debugfile
= find_separate_debug_file (symlink_dir
.get (),
1597 /* This is the symbol-file command. Read the file, analyze its
1598 symbols, and add a struct symtab to a symtab list. The syntax of
1599 the command is rather bizarre:
1601 1. The function buildargv implements various quoting conventions
1602 which are undocumented and have little or nothing in common with
1603 the way things are quoted (or not quoted) elsewhere in GDB.
1605 2. Options are used, which are not generally used in GDB (perhaps
1606 "set mapped on", "set readnow on" would be better)
1608 3. The order of options matters, which is contrary to GNU
1609 conventions (because it is confusing and inconvenient). */
1612 symbol_file_command (const char *args
, int from_tty
)
1618 symbol_file_clear (from_tty
);
1622 objfile_flags flags
= OBJF_USERLOADED
;
1623 symfile_add_flags add_flags
= 0;
1627 add_flags
|= SYMFILE_VERBOSE
;
1629 gdb_argv
built_argv (args
);
1630 for (char *arg
: built_argv
)
1632 if (strcmp (arg
, "-readnow") == 0)
1633 flags
|= OBJF_READNOW
;
1634 else if (*arg
== '-')
1635 error (_("unknown option `%s'"), arg
);
1638 symbol_file_add_main_1 (arg
, add_flags
, flags
);
1644 error (_("no symbol file name was specified"));
1648 /* Set the initial language.
1650 FIXME: A better solution would be to record the language in the
1651 psymtab when reading partial symbols, and then use it (if known) to
1652 set the language. This would be a win for formats that encode the
1653 language in an easily discoverable place, such as DWARF. For
1654 stabs, we can jump through hoops looking for specially named
1655 symbols or try to intuit the language from the specific type of
1656 stabs we find, but we can't do that until later when we read in
1660 set_initial_language (void)
1662 enum language lang
= main_language ();
1664 if (lang
== language_unknown
)
1666 char *name
= main_name ();
1667 struct symbol
*sym
= lookup_symbol (name
, NULL
, VAR_DOMAIN
, NULL
).symbol
;
1670 lang
= SYMBOL_LANGUAGE (sym
);
1673 if (lang
== language_unknown
)
1675 /* Make C the default language */
1679 set_language (lang
);
1680 expected_language
= current_language
; /* Don't warn the user. */
1683 /* Open the file specified by NAME and hand it off to BFD for
1684 preliminary analysis. Return a newly initialized bfd *, which
1685 includes a newly malloc'd` copy of NAME (tilde-expanded and made
1686 absolute). In case of trouble, error() is called. */
1689 symfile_bfd_open (const char *name
)
1692 struct cleanup
*back_to
= make_cleanup (null_cleanup
, 0);
1694 if (!is_target_filename (name
))
1696 char *absolute_name
;
1698 gdb::unique_xmalloc_ptr
<char> expanded_name (tilde_expand (name
));
1700 /* Look down path for it, allocate 2nd new malloc'd copy. */
1701 desc
= openp (getenv ("PATH"),
1702 OPF_TRY_CWD_FIRST
| OPF_RETURN_REALPATH
,
1703 expanded_name
.get (), O_RDONLY
| O_BINARY
, &absolute_name
);
1704 #if defined(__GO32__) || defined(_WIN32) || defined (__CYGWIN__)
1707 char *exename
= (char *) alloca (strlen (expanded_name
.get ()) + 5);
1709 strcat (strcpy (exename
, expanded_name
.get ()), ".exe");
1710 desc
= openp (getenv ("PATH"),
1711 OPF_TRY_CWD_FIRST
| OPF_RETURN_REALPATH
,
1712 exename
, O_RDONLY
| O_BINARY
, &absolute_name
);
1716 perror_with_name (expanded_name
.get ());
1718 make_cleanup (xfree
, absolute_name
);
1719 name
= absolute_name
;
1722 gdb_bfd_ref_ptr
sym_bfd (gdb_bfd_open (name
, gnutarget
, desc
));
1723 if (sym_bfd
== NULL
)
1724 error (_("`%s': can't open to read symbols: %s."), name
,
1725 bfd_errmsg (bfd_get_error ()));
1727 if (!gdb_bfd_has_target_filename (sym_bfd
.get ()))
1728 bfd_set_cacheable (sym_bfd
.get (), 1);
1730 if (!bfd_check_format (sym_bfd
.get (), bfd_object
))
1731 error (_("`%s': can't read symbols: %s."), name
,
1732 bfd_errmsg (bfd_get_error ()));
1734 do_cleanups (back_to
);
1739 /* Return the section index for SECTION_NAME on OBJFILE. Return -1 if
1740 the section was not found. */
1743 get_section_index (struct objfile
*objfile
, const char *section_name
)
1745 asection
*sect
= bfd_get_section_by_name (objfile
->obfd
, section_name
);
1753 /* Link SF into the global symtab_fns list.
1754 FLAVOUR is the file format that SF handles.
1755 Called on startup by the _initialize routine in each object file format
1756 reader, to register information about each format the reader is prepared
1760 add_symtab_fns (enum bfd_flavour flavour
, const struct sym_fns
*sf
)
1762 symtab_fns
.emplace_back (flavour
, sf
);
1765 /* Initialize OBJFILE to read symbols from its associated BFD. It
1766 either returns or calls error(). The result is an initialized
1767 struct sym_fns in the objfile structure, that contains cached
1768 information about the symbol file. */
1770 static const struct sym_fns
*
1771 find_sym_fns (bfd
*abfd
)
1773 enum bfd_flavour our_flavour
= bfd_get_flavour (abfd
);
1775 if (our_flavour
== bfd_target_srec_flavour
1776 || our_flavour
== bfd_target_ihex_flavour
1777 || our_flavour
== bfd_target_tekhex_flavour
)
1778 return NULL
; /* No symbols. */
1780 for (const registered_sym_fns
&rsf
: symtab_fns
)
1781 if (our_flavour
== rsf
.sym_flavour
)
1784 error (_("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown."),
1785 bfd_get_target (abfd
));
1789 /* This function runs the load command of our current target. */
1792 load_command (const char *arg
, int from_tty
)
1794 struct cleanup
*cleanup
= make_cleanup (null_cleanup
, NULL
);
1798 /* The user might be reloading because the binary has changed. Take
1799 this opportunity to check. */
1800 reopen_exec_file ();
1808 parg
= arg
= get_exec_file (1);
1810 /* Count how many \ " ' tab space there are in the name. */
1811 while ((parg
= strpbrk (parg
, "\\\"'\t ")))
1819 /* We need to quote this string so buildargv can pull it apart. */
1820 char *temp
= (char *) xmalloc (strlen (arg
) + count
+ 1 );
1824 make_cleanup (xfree
, temp
);
1827 while ((parg
= strpbrk (parg
, "\\\"'\t ")))
1829 strncpy (ptemp
, prev
, parg
- prev
);
1830 ptemp
+= parg
- prev
;
1834 strcpy (ptemp
, prev
);
1840 target_load (arg
, from_tty
);
1842 /* After re-loading the executable, we don't really know which
1843 overlays are mapped any more. */
1844 overlay_cache_invalid
= 1;
1846 do_cleanups (cleanup
);
1849 /* This version of "load" should be usable for any target. Currently
1850 it is just used for remote targets, not inftarg.c or core files,
1851 on the theory that only in that case is it useful.
1853 Avoiding xmodem and the like seems like a win (a) because we don't have
1854 to worry about finding it, and (b) On VMS, fork() is very slow and so
1855 we don't want to run a subprocess. On the other hand, I'm not sure how
1856 performance compares. */
1858 static int validate_download
= 0;
1860 /* Callback service function for generic_load (bfd_map_over_sections). */
1863 add_section_size_callback (bfd
*abfd
, asection
*asec
, void *data
)
1865 bfd_size_type
*sum
= (bfd_size_type
*) data
;
1867 *sum
+= bfd_get_section_size (asec
);
1870 /* Opaque data for load_section_callback. */
1871 struct load_section_data
{
1872 CORE_ADDR load_offset
;
1873 struct load_progress_data
*progress_data
;
1874 VEC(memory_write_request_s
) *requests
;
1877 /* Opaque data for load_progress. */
1878 struct load_progress_data
{
1879 /* Cumulative data. */
1880 unsigned long write_count
;
1881 unsigned long data_count
;
1882 bfd_size_type total_size
;
1885 /* Opaque data for load_progress for a single section. */
1886 struct load_progress_section_data
{
1887 struct load_progress_data
*cumulative
;
1889 /* Per-section data. */
1890 const char *section_name
;
1891 ULONGEST section_sent
;
1892 ULONGEST section_size
;
1897 /* Target write callback routine for progress reporting. */
1900 load_progress (ULONGEST bytes
, void *untyped_arg
)
1902 struct load_progress_section_data
*args
1903 = (struct load_progress_section_data
*) untyped_arg
;
1904 struct load_progress_data
*totals
;
1907 /* Writing padding data. No easy way to get at the cumulative
1908 stats, so just ignore this. */
1911 totals
= args
->cumulative
;
1913 if (bytes
== 0 && args
->section_sent
== 0)
1915 /* The write is just starting. Let the user know we've started
1917 current_uiout
->message ("Loading section %s, size %s lma %s\n",
1919 hex_string (args
->section_size
),
1920 paddress (target_gdbarch (), args
->lma
));
1924 if (validate_download
)
1926 /* Broken memories and broken monitors manifest themselves here
1927 when bring new computers to life. This doubles already slow
1929 /* NOTE: cagney/1999-10-18: A more efficient implementation
1930 might add a verify_memory() method to the target vector and
1931 then use that. remote.c could implement that method using
1932 the ``qCRC'' packet. */
1933 gdb::byte_vector
check (bytes
);
1935 if (target_read_memory (args
->lma
, check
.data (), bytes
) != 0)
1936 error (_("Download verify read failed at %s"),
1937 paddress (target_gdbarch (), args
->lma
));
1938 if (memcmp (args
->buffer
, check
.data (), bytes
) != 0)
1939 error (_("Download verify compare failed at %s"),
1940 paddress (target_gdbarch (), args
->lma
));
1942 totals
->data_count
+= bytes
;
1944 args
->buffer
+= bytes
;
1945 totals
->write_count
+= 1;
1946 args
->section_sent
+= bytes
;
1947 if (check_quit_flag ()
1948 || (deprecated_ui_load_progress_hook
!= NULL
1949 && deprecated_ui_load_progress_hook (args
->section_name
,
1950 args
->section_sent
)))
1951 error (_("Canceled the download"));
1953 if (deprecated_show_load_progress
!= NULL
)
1954 deprecated_show_load_progress (args
->section_name
,
1958 totals
->total_size
);
1961 /* Callback service function for generic_load (bfd_map_over_sections). */
1964 load_section_callback (bfd
*abfd
, asection
*asec
, void *data
)
1966 struct memory_write_request
*new_request
;
1967 struct load_section_data
*args
= (struct load_section_data
*) data
;
1968 struct load_progress_section_data
*section_data
;
1969 bfd_size_type size
= bfd_get_section_size (asec
);
1971 const char *sect_name
= bfd_get_section_name (abfd
, asec
);
1973 if ((bfd_get_section_flags (abfd
, asec
) & SEC_LOAD
) == 0)
1979 new_request
= VEC_safe_push (memory_write_request_s
,
1980 args
->requests
, NULL
);
1981 memset (new_request
, 0, sizeof (struct memory_write_request
));
1982 section_data
= XCNEW (struct load_progress_section_data
);
1983 new_request
->begin
= bfd_section_lma (abfd
, asec
) + args
->load_offset
;
1984 new_request
->end
= new_request
->begin
+ size
; /* FIXME Should size
1986 new_request
->data
= (gdb_byte
*) xmalloc (size
);
1987 new_request
->baton
= section_data
;
1989 buffer
= new_request
->data
;
1991 section_data
->cumulative
= args
->progress_data
;
1992 section_data
->section_name
= sect_name
;
1993 section_data
->section_size
= size
;
1994 section_data
->lma
= new_request
->begin
;
1995 section_data
->buffer
= buffer
;
1997 bfd_get_section_contents (abfd
, asec
, buffer
, 0, size
);
2000 /* Clean up an entire memory request vector, including load
2001 data and progress records. */
2004 clear_memory_write_data (void *arg
)
2006 VEC(memory_write_request_s
) **vec_p
= (VEC(memory_write_request_s
) **) arg
;
2007 VEC(memory_write_request_s
) *vec
= *vec_p
;
2009 struct memory_write_request
*mr
;
2011 for (i
= 0; VEC_iterate (memory_write_request_s
, vec
, i
, mr
); ++i
)
2016 VEC_free (memory_write_request_s
, vec
);
2019 static void print_transfer_performance (struct ui_file
*stream
,
2020 unsigned long data_count
,
2021 unsigned long write_count
,
2022 std::chrono::steady_clock::duration d
);
2025 generic_load (const char *args
, int from_tty
)
2027 struct cleanup
*old_cleanups
;
2028 struct load_section_data cbdata
;
2029 struct load_progress_data total_progress
;
2030 struct ui_out
*uiout
= current_uiout
;
2034 memset (&cbdata
, 0, sizeof (cbdata
));
2035 memset (&total_progress
, 0, sizeof (total_progress
));
2036 cbdata
.progress_data
= &total_progress
;
2038 old_cleanups
= make_cleanup (clear_memory_write_data
, &cbdata
.requests
);
2041 error_no_arg (_("file to load"));
2043 gdb_argv
argv (args
);
2045 gdb::unique_xmalloc_ptr
<char> filename (tilde_expand (argv
[0]));
2047 if (argv
[1] != NULL
)
2051 cbdata
.load_offset
= strtoulst (argv
[1], &endptr
, 0);
2053 /* If the last word was not a valid number then
2054 treat it as a file name with spaces in. */
2055 if (argv
[1] == endptr
)
2056 error (_("Invalid download offset:%s."), argv
[1]);
2058 if (argv
[2] != NULL
)
2059 error (_("Too many parameters."));
2062 /* Open the file for loading. */
2063 gdb_bfd_ref_ptr
loadfile_bfd (gdb_bfd_open (filename
.get (), gnutarget
, -1));
2064 if (loadfile_bfd
== NULL
)
2065 perror_with_name (filename
.get ());
2067 if (!bfd_check_format (loadfile_bfd
.get (), bfd_object
))
2069 error (_("\"%s\" is not an object file: %s"), filename
.get (),
2070 bfd_errmsg (bfd_get_error ()));
2073 bfd_map_over_sections (loadfile_bfd
.get (), add_section_size_callback
,
2074 (void *) &total_progress
.total_size
);
2076 bfd_map_over_sections (loadfile_bfd
.get (), load_section_callback
, &cbdata
);
2078 using namespace std::chrono
;
2080 steady_clock::time_point start_time
= steady_clock::now ();
2082 if (target_write_memory_blocks (cbdata
.requests
, flash_discard
,
2083 load_progress
) != 0)
2084 error (_("Load failed"));
2086 steady_clock::time_point end_time
= steady_clock::now ();
2088 entry
= bfd_get_start_address (loadfile_bfd
.get ());
2089 entry
= gdbarch_addr_bits_remove (target_gdbarch (), entry
);
2090 uiout
->text ("Start address ");
2091 uiout
->field_fmt ("address", "%s", paddress (target_gdbarch (), entry
));
2092 uiout
->text (", load size ");
2093 uiout
->field_fmt ("load-size", "%lu", total_progress
.data_count
);
2095 regcache_write_pc (get_current_regcache (), entry
);
2097 /* Reset breakpoints, now that we have changed the load image. For
2098 instance, breakpoints may have been set (or reset, by
2099 post_create_inferior) while connected to the target but before we
2100 loaded the program. In that case, the prologue analyzer could
2101 have read instructions from the target to find the right
2102 breakpoint locations. Loading has changed the contents of that
2105 breakpoint_re_set ();
2107 print_transfer_performance (gdb_stdout
, total_progress
.data_count
,
2108 total_progress
.write_count
,
2109 end_time
- start_time
);
2111 do_cleanups (old_cleanups
);
2114 /* Report on STREAM the performance of a memory transfer operation,
2115 such as 'load'. DATA_COUNT is the number of bytes transferred.
2116 WRITE_COUNT is the number of separate write operations, or 0, if
2117 that information is not available. TIME is how long the operation
2121 print_transfer_performance (struct ui_file
*stream
,
2122 unsigned long data_count
,
2123 unsigned long write_count
,
2124 std::chrono::steady_clock::duration time
)
2126 using namespace std::chrono
;
2127 struct ui_out
*uiout
= current_uiout
;
2129 milliseconds ms
= duration_cast
<milliseconds
> (time
);
2131 uiout
->text ("Transfer rate: ");
2132 if (ms
.count () > 0)
2134 unsigned long rate
= ((ULONGEST
) data_count
* 1000) / ms
.count ();
2136 if (uiout
->is_mi_like_p ())
2138 uiout
->field_fmt ("transfer-rate", "%lu", rate
* 8);
2139 uiout
->text (" bits/sec");
2141 else if (rate
< 1024)
2143 uiout
->field_fmt ("transfer-rate", "%lu", rate
);
2144 uiout
->text (" bytes/sec");
2148 uiout
->field_fmt ("transfer-rate", "%lu", rate
/ 1024);
2149 uiout
->text (" KB/sec");
2154 uiout
->field_fmt ("transferred-bits", "%lu", (data_count
* 8));
2155 uiout
->text (" bits in <1 sec");
2157 if (write_count
> 0)
2160 uiout
->field_fmt ("write-rate", "%lu", data_count
/ write_count
);
2161 uiout
->text (" bytes/write");
2163 uiout
->text (".\n");
2166 /* This function allows the addition of incrementally linked object files.
2167 It does not modify any state in the target, only in the debugger. */
2168 /* Note: ezannoni 2000-04-13 This function/command used to have a
2169 special case syntax for the rombug target (Rombug is the boot
2170 monitor for Microware's OS-9 / OS-9000, see remote-os9k.c). In the
2171 rombug case, the user doesn't need to supply a text address,
2172 instead a call to target_link() (in target.c) would supply the
2173 value to use. We are now discontinuing this type of ad hoc syntax. */
2176 add_symbol_file_command (const char *args
, int from_tty
)
2178 struct gdbarch
*gdbarch
= get_current_arch ();
2179 gdb::unique_xmalloc_ptr
<char> filename
;
2183 int expecting_sec_name
= 0;
2184 int expecting_sec_addr
= 0;
2185 struct objfile
*objf
;
2186 objfile_flags flags
= OBJF_USERLOADED
| OBJF_SHARED
;
2187 symfile_add_flags add_flags
= 0;
2190 add_flags
|= SYMFILE_VERBOSE
;
2198 struct section_addr_info
*section_addrs
;
2199 std::vector
<sect_opt
> sect_opts
;
2200 struct cleanup
*my_cleanups
= make_cleanup (null_cleanup
, NULL
);
2205 error (_("add-symbol-file takes a file name and an address"));
2207 gdb_argv
argv (args
);
2209 for (arg
= argv
[0], argcnt
= 0; arg
!= NULL
; arg
= argv
[++argcnt
])
2211 /* Process the argument. */
2214 /* The first argument is the file name. */
2215 filename
.reset (tilde_expand (arg
));
2217 else if (argcnt
== 1)
2219 /* The second argument is always the text address at which
2220 to load the program. */
2221 sect_opt sect
= { ".text", arg
};
2222 sect_opts
.push_back (sect
);
2226 /* It's an option (starting with '-') or it's an argument
2228 if (expecting_sec_name
)
2230 sect_opt sect
= { arg
, NULL
};
2231 sect_opts
.push_back (sect
);
2232 expecting_sec_name
= 0;
2234 else if (expecting_sec_addr
)
2236 sect_opts
.back ().value
= arg
;
2237 expecting_sec_addr
= 0;
2239 else if (strcmp (arg
, "-readnow") == 0)
2240 flags
|= OBJF_READNOW
;
2241 else if (strcmp (arg
, "-s") == 0)
2243 expecting_sec_name
= 1;
2244 expecting_sec_addr
= 1;
2247 error (_("USAGE: add-symbol-file <filename> <textaddress>"
2248 " [-readnow] [-s <secname> <addr>]*"));
2252 /* This command takes at least two arguments. The first one is a
2253 filename, and the second is the address where this file has been
2254 loaded. Abort now if this address hasn't been provided by the
2256 if (sect_opts
.empty ())
2257 error (_("The address where %s has been loaded is missing"),
2260 /* Print the prompt for the query below. And save the arguments into
2261 a sect_addr_info structure to be passed around to other
2262 functions. We have to split this up into separate print
2263 statements because hex_string returns a local static
2266 printf_unfiltered (_("add symbol table from file \"%s\" at\n"),
2268 section_addrs
= alloc_section_addr_info (sect_opts
.size ());
2269 make_cleanup (xfree
, section_addrs
);
2270 for (sect_opt
§
: sect_opts
)
2273 const char *val
= sect
.value
;
2274 const char *sec
= sect
.name
;
2276 addr
= parse_and_eval_address (val
);
2278 /* Here we store the section offsets in the order they were
2279 entered on the command line. */
2280 section_addrs
->other
[sec_num
].name
= (char *) sec
;
2281 section_addrs
->other
[sec_num
].addr
= addr
;
2282 printf_unfiltered ("\t%s_addr = %s\n", sec
,
2283 paddress (gdbarch
, addr
));
2286 /* The object's sections are initialized when a
2287 call is made to build_objfile_section_table (objfile).
2288 This happens in reread_symbols.
2289 At this point, we don't know what file type this is,
2290 so we can't determine what section names are valid. */
2292 section_addrs
->num_sections
= sec_num
;
2294 if (from_tty
&& (!query ("%s", "")))
2295 error (_("Not confirmed."));
2297 objf
= symbol_file_add (filename
.get (), add_flags
, section_addrs
, flags
);
2299 add_target_sections_of_objfile (objf
);
2301 /* Getting new symbols may change our opinion about what is
2303 reinit_frame_cache ();
2304 do_cleanups (my_cleanups
);
2308 /* This function removes a symbol file that was added via add-symbol-file. */
2311 remove_symbol_file_command (const char *args
, int from_tty
)
2313 struct objfile
*objf
= NULL
;
2314 struct program_space
*pspace
= current_program_space
;
2319 error (_("remove-symbol-file: no symbol file provided"));
2321 gdb_argv
argv (args
);
2323 if (strcmp (argv
[0], "-a") == 0)
2325 /* Interpret the next argument as an address. */
2328 if (argv
[1] == NULL
)
2329 error (_("Missing address argument"));
2331 if (argv
[2] != NULL
)
2332 error (_("Junk after %s"), argv
[1]);
2334 addr
= parse_and_eval_address (argv
[1]);
2338 if ((objf
->flags
& OBJF_USERLOADED
) != 0
2339 && (objf
->flags
& OBJF_SHARED
) != 0
2340 && objf
->pspace
== pspace
&& is_addr_in_objfile (addr
, objf
))
2344 else if (argv
[0] != NULL
)
2346 /* Interpret the current argument as a file name. */
2348 if (argv
[1] != NULL
)
2349 error (_("Junk after %s"), argv
[0]);
2351 gdb::unique_xmalloc_ptr
<char> filename (tilde_expand (argv
[0]));
2355 if ((objf
->flags
& OBJF_USERLOADED
) != 0
2356 && (objf
->flags
& OBJF_SHARED
) != 0
2357 && objf
->pspace
== pspace
2358 && filename_cmp (filename
.get (), objfile_name (objf
)) == 0)
2364 error (_("No symbol file found"));
2367 && !query (_("Remove symbol table from file \"%s\"? "),
2368 objfile_name (objf
)))
2369 error (_("Not confirmed."));
2372 clear_symtab_users (0);
2375 /* Re-read symbols if a symbol-file has changed. */
2378 reread_symbols (void)
2380 struct objfile
*objfile
;
2382 struct stat new_statbuf
;
2384 std::vector
<struct objfile
*> new_objfiles
;
2386 /* With the addition of shared libraries, this should be modified,
2387 the load time should be saved in the partial symbol tables, since
2388 different tables may come from different source files. FIXME.
2389 This routine should then walk down each partial symbol table
2390 and see if the symbol table that it originates from has been changed. */
2392 for (objfile
= object_files
; objfile
; objfile
= objfile
->next
)
2394 if (objfile
->obfd
== NULL
)
2397 /* Separate debug objfiles are handled in the main objfile. */
2398 if (objfile
->separate_debug_objfile_backlink
)
2401 /* If this object is from an archive (what you usually create with
2402 `ar', often called a `static library' on most systems, though
2403 a `shared library' on AIX is also an archive), then you should
2404 stat on the archive name, not member name. */
2405 if (objfile
->obfd
->my_archive
)
2406 res
= stat (objfile
->obfd
->my_archive
->filename
, &new_statbuf
);
2408 res
= stat (objfile_name (objfile
), &new_statbuf
);
2411 /* FIXME, should use print_sys_errmsg but it's not filtered. */
2412 printf_unfiltered (_("`%s' has disappeared; keeping its symbols.\n"),
2413 objfile_name (objfile
));
2416 new_modtime
= new_statbuf
.st_mtime
;
2417 if (new_modtime
!= objfile
->mtime
)
2419 struct cleanup
*old_cleanups
;
2420 struct section_offsets
*offsets
;
2422 char *original_name
;
2424 printf_unfiltered (_("`%s' has changed; re-reading symbols.\n"),
2425 objfile_name (objfile
));
2427 /* There are various functions like symbol_file_add,
2428 symfile_bfd_open, syms_from_objfile, etc., which might
2429 appear to do what we want. But they have various other
2430 effects which we *don't* want. So we just do stuff
2431 ourselves. We don't worry about mapped files (for one thing,
2432 any mapped file will be out of date). */
2434 /* If we get an error, blow away this objfile (not sure if
2435 that is the correct response for things like shared
2437 std::unique_ptr
<struct objfile
> objfile_holder (objfile
);
2439 /* We need to do this whenever any symbols go away. */
2440 old_cleanups
= make_cleanup (clear_symtab_users_cleanup
, 0 /*ignore*/);
2442 if (exec_bfd
!= NULL
2443 && filename_cmp (bfd_get_filename (objfile
->obfd
),
2444 bfd_get_filename (exec_bfd
)) == 0)
2446 /* Reload EXEC_BFD without asking anything. */
2448 exec_file_attach (bfd_get_filename (objfile
->obfd
), 0);
2451 /* Keep the calls order approx. the same as in free_objfile. */
2453 /* Free the separate debug objfiles. It will be
2454 automatically recreated by sym_read. */
2455 free_objfile_separate_debug (objfile
);
2457 /* Remove any references to this objfile in the global
2459 preserve_values (objfile
);
2461 /* Nuke all the state that we will re-read. Much of the following
2462 code which sets things to NULL really is necessary to tell
2463 other parts of GDB that there is nothing currently there.
2465 Try to keep the freeing order compatible with free_objfile. */
2467 if (objfile
->sf
!= NULL
)
2469 (*objfile
->sf
->sym_finish
) (objfile
);
2472 clear_objfile_data (objfile
);
2474 /* Clean up any state BFD has sitting around. */
2476 gdb_bfd_ref_ptr
obfd (objfile
->obfd
);
2477 char *obfd_filename
;
2479 obfd_filename
= bfd_get_filename (objfile
->obfd
);
2480 /* Open the new BFD before freeing the old one, so that
2481 the filename remains live. */
2482 gdb_bfd_ref_ptr
temp (gdb_bfd_open (obfd_filename
, gnutarget
, -1));
2483 objfile
->obfd
= temp
.release ();
2484 if (objfile
->obfd
== NULL
)
2485 error (_("Can't open %s to read symbols."), obfd_filename
);
2488 original_name
= xstrdup (objfile
->original_name
);
2489 make_cleanup (xfree
, original_name
);
2491 /* bfd_openr sets cacheable to true, which is what we want. */
2492 if (!bfd_check_format (objfile
->obfd
, bfd_object
))
2493 error (_("Can't read symbols from %s: %s."), objfile_name (objfile
),
2494 bfd_errmsg (bfd_get_error ()));
2496 /* Save the offsets, we will nuke them with the rest of the
2498 num_offsets
= objfile
->num_sections
;
2499 offsets
= ((struct section_offsets
*)
2500 alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets
)));
2501 memcpy (offsets
, objfile
->section_offsets
,
2502 SIZEOF_N_SECTION_OFFSETS (num_offsets
));
2504 /* FIXME: Do we have to free a whole linked list, or is this
2506 objfile
->global_psymbols
.clear ();
2507 objfile
->static_psymbols
.clear ();
2509 /* Free the obstacks for non-reusable objfiles. */
2510 psymbol_bcache_free (objfile
->psymbol_cache
);
2511 objfile
->psymbol_cache
= psymbol_bcache_init ();
2513 /* NB: after this call to obstack_free, objfiles_changed
2514 will need to be called (see discussion below). */
2515 obstack_free (&objfile
->objfile_obstack
, 0);
2516 objfile
->sections
= NULL
;
2517 objfile
->compunit_symtabs
= NULL
;
2518 objfile
->psymtabs
= NULL
;
2519 objfile
->psymtabs_addrmap
= NULL
;
2520 objfile
->free_psymtabs
= NULL
;
2521 objfile
->template_symbols
= NULL
;
2523 /* obstack_init also initializes the obstack so it is
2524 empty. We could use obstack_specify_allocation but
2525 gdb_obstack.h specifies the alloc/dealloc functions. */
2526 obstack_init (&objfile
->objfile_obstack
);
2528 /* set_objfile_per_bfd potentially allocates the per-bfd
2529 data on the objfile's obstack (if sharing data across
2530 multiple users is not possible), so it's important to
2531 do it *after* the obstack has been initialized. */
2532 set_objfile_per_bfd (objfile
);
2534 objfile
->original_name
2535 = (char *) obstack_copy0 (&objfile
->objfile_obstack
, original_name
,
2536 strlen (original_name
));
2538 /* Reset the sym_fns pointer. The ELF reader can change it
2539 based on whether .gdb_index is present, and we need it to
2540 start over. PR symtab/15885 */
2541 objfile_set_sym_fns (objfile
, find_sym_fns (objfile
->obfd
));
2543 build_objfile_section_table (objfile
);
2544 terminate_minimal_symbol_table (objfile
);
2546 /* We use the same section offsets as from last time. I'm not
2547 sure whether that is always correct for shared libraries. */
2548 objfile
->section_offsets
= (struct section_offsets
*)
2549 obstack_alloc (&objfile
->objfile_obstack
,
2550 SIZEOF_N_SECTION_OFFSETS (num_offsets
));
2551 memcpy (objfile
->section_offsets
, offsets
,
2552 SIZEOF_N_SECTION_OFFSETS (num_offsets
));
2553 objfile
->num_sections
= num_offsets
;
2555 /* What the hell is sym_new_init for, anyway? The concept of
2556 distinguishing between the main file and additional files
2557 in this way seems rather dubious. */
2558 if (objfile
== symfile_objfile
)
2560 (*objfile
->sf
->sym_new_init
) (objfile
);
2563 (*objfile
->sf
->sym_init
) (objfile
);
2564 clear_complaints (&symfile_complaints
, 1, 1);
2566 objfile
->flags
&= ~OBJF_PSYMTABS_READ
;
2568 /* We are about to read new symbols and potentially also
2569 DWARF information. Some targets may want to pass addresses
2570 read from DWARF DIE's through an adjustment function before
2571 saving them, like MIPS, which may call into
2572 "find_pc_section". When called, that function will make
2573 use of per-objfile program space data.
2575 Since we discarded our section information above, we have
2576 dangling pointers in the per-objfile program space data
2577 structure. Force GDB to update the section mapping
2578 information by letting it know the objfile has changed,
2579 making the dangling pointers point to correct data
2582 objfiles_changed ();
2584 read_symbols (objfile
, 0);
2586 if (!objfile_has_symbols (objfile
))
2589 printf_unfiltered (_("(no debugging symbols found)\n"));
2593 /* We're done reading the symbol file; finish off complaints. */
2594 clear_complaints (&symfile_complaints
, 0, 1);
2596 /* Getting new symbols may change our opinion about what is
2599 reinit_frame_cache ();
2601 /* Discard cleanups as symbol reading was successful. */
2602 objfile_holder
.release ();
2603 discard_cleanups (old_cleanups
);
2605 /* If the mtime has changed between the time we set new_modtime
2606 and now, we *want* this to be out of date, so don't call stat
2608 objfile
->mtime
= new_modtime
;
2609 init_entry_point_info (objfile
);
2611 new_objfiles
.push_back (objfile
);
2615 if (!new_objfiles
.empty ())
2617 clear_symtab_users (0);
2619 /* clear_objfile_data for each objfile was called before freeing it and
2620 observer_notify_new_objfile (NULL) has been called by
2621 clear_symtab_users above. Notify the new files now. */
2622 for (auto iter
: new_objfiles
)
2623 observer_notify_new_objfile (iter
);
2625 /* At least one objfile has changed, so we can consider that
2626 the executable we're debugging has changed too. */
2627 observer_notify_executable_changed ();
2632 struct filename_language
2634 filename_language (const std::string
&ext_
, enum language lang_
)
2635 : ext (ext_
), lang (lang_
)
2642 static std::vector
<filename_language
> filename_language_table
;
2644 /* See symfile.h. */
2647 add_filename_language (const char *ext
, enum language lang
)
2649 filename_language_table
.emplace_back (ext
, lang
);
2652 static char *ext_args
;
2654 show_ext_args (struct ui_file
*file
, int from_tty
,
2655 struct cmd_list_element
*c
, const char *value
)
2657 fprintf_filtered (file
,
2658 _("Mapping between filename extension "
2659 "and source language is \"%s\".\n"),
2664 set_ext_lang_command (char *args
, int from_tty
, struct cmd_list_element
*e
)
2666 char *cp
= ext_args
;
2669 /* First arg is filename extension, starting with '.' */
2671 error (_("'%s': Filename extension must begin with '.'"), ext_args
);
2673 /* Find end of first arg. */
2674 while (*cp
&& !isspace (*cp
))
2678 error (_("'%s': two arguments required -- "
2679 "filename extension and language"),
2682 /* Null-terminate first arg. */
2685 /* Find beginning of second arg, which should be a source language. */
2686 cp
= skip_spaces (cp
);
2689 error (_("'%s': two arguments required -- "
2690 "filename extension and language"),
2693 /* Lookup the language from among those we know. */
2694 lang
= language_enum (cp
);
2696 auto it
= filename_language_table
.begin ();
2697 /* Now lookup the filename extension: do we already know it? */
2698 for (; it
!= filename_language_table
.end (); it
++)
2700 if (it
->ext
== ext_args
)
2704 if (it
== filename_language_table
.end ())
2706 /* New file extension. */
2707 add_filename_language (ext_args
, lang
);
2711 /* Redefining a previously known filename extension. */
2714 /* query ("Really make files of type %s '%s'?", */
2715 /* ext_args, language_str (lang)); */
2722 info_ext_lang_command (const char *args
, int from_tty
)
2724 printf_filtered (_("Filename extensions and the languages they represent:"));
2725 printf_filtered ("\n\n");
2726 for (const filename_language
&entry
: filename_language_table
)
2727 printf_filtered ("\t%s\t- %s\n", entry
.ext
.c_str (),
2728 language_str (entry
.lang
));
2732 deduce_language_from_filename (const char *filename
)
2736 if (filename
!= NULL
)
2737 if ((cp
= strrchr (filename
, '.')) != NULL
)
2739 for (const filename_language
&entry
: filename_language_table
)
2740 if (entry
.ext
== cp
)
2744 return language_unknown
;
2747 /* Allocate and initialize a new symbol table.
2748 CUST is from the result of allocate_compunit_symtab. */
2751 allocate_symtab (struct compunit_symtab
*cust
, const char *filename
)
2753 struct objfile
*objfile
= cust
->objfile
;
2754 struct symtab
*symtab
2755 = OBSTACK_ZALLOC (&objfile
->objfile_obstack
, struct symtab
);
2758 = (const char *) bcache (filename
, strlen (filename
) + 1,
2759 objfile
->per_bfd
->filename_cache
);
2760 symtab
->fullname
= NULL
;
2761 symtab
->language
= deduce_language_from_filename (filename
);
2763 /* This can be very verbose with lots of headers.
2764 Only print at higher debug levels. */
2765 if (symtab_create_debug
>= 2)
2767 /* Be a bit clever with debugging messages, and don't print objfile
2768 every time, only when it changes. */
2769 static char *last_objfile_name
= NULL
;
2771 if (last_objfile_name
== NULL
2772 || strcmp (last_objfile_name
, objfile_name (objfile
)) != 0)
2774 xfree (last_objfile_name
);
2775 last_objfile_name
= xstrdup (objfile_name (objfile
));
2776 fprintf_unfiltered (gdb_stdlog
,
2777 "Creating one or more symtabs for objfile %s ...\n",
2780 fprintf_unfiltered (gdb_stdlog
,
2781 "Created symtab %s for module %s.\n",
2782 host_address_to_string (symtab
), filename
);
2785 /* Add it to CUST's list of symtabs. */
2786 if (cust
->filetabs
== NULL
)
2788 cust
->filetabs
= symtab
;
2789 cust
->last_filetab
= symtab
;
2793 cust
->last_filetab
->next
= symtab
;
2794 cust
->last_filetab
= symtab
;
2797 /* Backlink to the containing compunit symtab. */
2798 symtab
->compunit_symtab
= cust
;
2803 /* Allocate and initialize a new compunit.
2804 NAME is the name of the main source file, if there is one, or some
2805 descriptive text if there are no source files. */
2807 struct compunit_symtab
*
2808 allocate_compunit_symtab (struct objfile
*objfile
, const char *name
)
2810 struct compunit_symtab
*cu
= OBSTACK_ZALLOC (&objfile
->objfile_obstack
,
2811 struct compunit_symtab
);
2812 const char *saved_name
;
2814 cu
->objfile
= objfile
;
2816 /* The name we record here is only for display/debugging purposes.
2817 Just save the basename to avoid path issues (too long for display,
2818 relative vs absolute, etc.). */
2819 saved_name
= lbasename (name
);
2821 = (const char *) obstack_copy0 (&objfile
->objfile_obstack
, saved_name
,
2822 strlen (saved_name
));
2824 COMPUNIT_DEBUGFORMAT (cu
) = "unknown";
2826 if (symtab_create_debug
)
2828 fprintf_unfiltered (gdb_stdlog
,
2829 "Created compunit symtab %s for %s.\n",
2830 host_address_to_string (cu
),
2837 /* Hook CU to the objfile it comes from. */
2840 add_compunit_symtab_to_objfile (struct compunit_symtab
*cu
)
2842 cu
->next
= cu
->objfile
->compunit_symtabs
;
2843 cu
->objfile
->compunit_symtabs
= cu
;
2847 /* Reset all data structures in gdb which may contain references to
2848 symbol table data. */
2851 clear_symtab_users (symfile_add_flags add_flags
)
2853 /* Someday, we should do better than this, by only blowing away
2854 the things that really need to be blown. */
2856 /* Clear the "current" symtab first, because it is no longer valid.
2857 breakpoint_re_set may try to access the current symtab. */
2858 clear_current_source_symtab_and_line ();
2861 clear_last_displayed_sal ();
2862 clear_pc_function_cache ();
2863 observer_notify_new_objfile (NULL
);
2865 /* Clear globals which might have pointed into a removed objfile.
2866 FIXME: It's not clear which of these are supposed to persist
2867 between expressions and which ought to be reset each time. */
2868 expression_context_block
= NULL
;
2869 innermost_block
= NULL
;
2871 /* Varobj may refer to old symbols, perform a cleanup. */
2872 varobj_invalidate ();
2874 /* Now that the various caches have been cleared, we can re_set
2875 our breakpoints without risking it using stale data. */
2876 if ((add_flags
& SYMFILE_DEFER_BP_RESET
) == 0)
2877 breakpoint_re_set ();
2881 clear_symtab_users_cleanup (void *ignore
)
2883 clear_symtab_users (0);
2887 The following code implements an abstraction for debugging overlay sections.
2889 The target model is as follows:
2890 1) The gnu linker will permit multiple sections to be mapped into the
2891 same VMA, each with its own unique LMA (or load address).
2892 2) It is assumed that some runtime mechanism exists for mapping the
2893 sections, one by one, from the load address into the VMA address.
2894 3) This code provides a mechanism for gdb to keep track of which
2895 sections should be considered to be mapped from the VMA to the LMA.
2896 This information is used for symbol lookup, and memory read/write.
2897 For instance, if a section has been mapped then its contents
2898 should be read from the VMA, otherwise from the LMA.
2900 Two levels of debugger support for overlays are available. One is
2901 "manual", in which the debugger relies on the user to tell it which
2902 overlays are currently mapped. This level of support is
2903 implemented entirely in the core debugger, and the information about
2904 whether a section is mapped is kept in the objfile->obj_section table.
2906 The second level of support is "automatic", and is only available if
2907 the target-specific code provides functionality to read the target's
2908 overlay mapping table, and translate its contents for the debugger
2909 (by updating the mapped state information in the obj_section tables).
2911 The interface is as follows:
2913 overlay map <name> -- tell gdb to consider this section mapped
2914 overlay unmap <name> -- tell gdb to consider this section unmapped
2915 overlay list -- list the sections that GDB thinks are mapped
2916 overlay read-target -- get the target's state of what's mapped
2917 overlay off/manual/auto -- set overlay debugging state
2918 Functional interface:
2919 find_pc_mapped_section(pc): if the pc is in the range of a mapped
2920 section, return that section.
2921 find_pc_overlay(pc): find any overlay section that contains
2922 the pc, either in its VMA or its LMA
2923 section_is_mapped(sect): true if overlay is marked as mapped
2924 section_is_overlay(sect): true if section's VMA != LMA
2925 pc_in_mapped_range(pc,sec): true if pc belongs to section's VMA
2926 pc_in_unmapped_range(...): true if pc belongs to section's LMA
2927 sections_overlap(sec1, sec2): true if mapped sec1 and sec2 ranges overlap
2928 overlay_mapped_address(...): map an address from section's LMA to VMA
2929 overlay_unmapped_address(...): map an address from section's VMA to LMA
2930 symbol_overlayed_address(...): Return a "current" address for symbol:
2931 either in VMA or LMA depending on whether
2932 the symbol's section is currently mapped. */
2934 /* Overlay debugging state: */
2936 enum overlay_debugging_state overlay_debugging
= ovly_off
;
2937 int overlay_cache_invalid
= 0; /* True if need to refresh mapped state. */
2939 /* Function: section_is_overlay (SECTION)
2940 Returns true if SECTION has VMA not equal to LMA, ie.
2941 SECTION is loaded at an address different from where it will "run". */
2944 section_is_overlay (struct obj_section
*section
)
2946 if (overlay_debugging
&& section
)
2948 bfd
*abfd
= section
->objfile
->obfd
;
2949 asection
*bfd_section
= section
->the_bfd_section
;
2951 if (bfd_section_lma (abfd
, bfd_section
) != 0
2952 && bfd_section_lma (abfd
, bfd_section
)
2953 != bfd_section_vma (abfd
, bfd_section
))
2960 /* Function: overlay_invalidate_all (void)
2961 Invalidate the mapped state of all overlay sections (mark it as stale). */
2964 overlay_invalidate_all (void)
2966 struct objfile
*objfile
;
2967 struct obj_section
*sect
;
2969 ALL_OBJSECTIONS (objfile
, sect
)
2970 if (section_is_overlay (sect
))
2971 sect
->ovly_mapped
= -1;
2974 /* Function: section_is_mapped (SECTION)
2975 Returns true if section is an overlay, and is currently mapped.
2977 Access to the ovly_mapped flag is restricted to this function, so
2978 that we can do automatic update. If the global flag
2979 OVERLAY_CACHE_INVALID is set (by wait_for_inferior), then call
2980 overlay_invalidate_all. If the mapped state of the particular
2981 section is stale, then call TARGET_OVERLAY_UPDATE to refresh it. */
2984 section_is_mapped (struct obj_section
*osect
)
2986 struct gdbarch
*gdbarch
;
2988 if (osect
== 0 || !section_is_overlay (osect
))
2991 switch (overlay_debugging
)
2995 return 0; /* overlay debugging off */
2996 case ovly_auto
: /* overlay debugging automatic */
2997 /* Unles there is a gdbarch_overlay_update function,
2998 there's really nothing useful to do here (can't really go auto). */
2999 gdbarch
= get_objfile_arch (osect
->objfile
);
3000 if (gdbarch_overlay_update_p (gdbarch
))
3002 if (overlay_cache_invalid
)
3004 overlay_invalidate_all ();
3005 overlay_cache_invalid
= 0;
3007 if (osect
->ovly_mapped
== -1)
3008 gdbarch_overlay_update (gdbarch
, osect
);
3010 /* fall thru to manual case */
3011 case ovly_on
: /* overlay debugging manual */
3012 return osect
->ovly_mapped
== 1;
3016 /* Function: pc_in_unmapped_range
3017 If PC falls into the lma range of SECTION, return true, else false. */
3020 pc_in_unmapped_range (CORE_ADDR pc
, struct obj_section
*section
)
3022 if (section_is_overlay (section
))
3024 bfd
*abfd
= section
->objfile
->obfd
;
3025 asection
*bfd_section
= section
->the_bfd_section
;
3027 /* We assume the LMA is relocated by the same offset as the VMA. */
3028 bfd_vma size
= bfd_get_section_size (bfd_section
);
3029 CORE_ADDR offset
= obj_section_offset (section
);
3031 if (bfd_get_section_lma (abfd
, bfd_section
) + offset
<= pc
3032 && pc
< bfd_get_section_lma (abfd
, bfd_section
) + offset
+ size
)
3039 /* Function: pc_in_mapped_range
3040 If PC falls into the vma range of SECTION, return true, else false. */
3043 pc_in_mapped_range (CORE_ADDR pc
, struct obj_section
*section
)
3045 if (section_is_overlay (section
))
3047 if (obj_section_addr (section
) <= pc
3048 && pc
< obj_section_endaddr (section
))
3055 /* Return true if the mapped ranges of sections A and B overlap, false
3059 sections_overlap (struct obj_section
*a
, struct obj_section
*b
)
3061 CORE_ADDR a_start
= obj_section_addr (a
);
3062 CORE_ADDR a_end
= obj_section_endaddr (a
);
3063 CORE_ADDR b_start
= obj_section_addr (b
);
3064 CORE_ADDR b_end
= obj_section_endaddr (b
);
3066 return (a_start
< b_end
&& b_start
< a_end
);
3069 /* Function: overlay_unmapped_address (PC, SECTION)
3070 Returns the address corresponding to PC in the unmapped (load) range.
3071 May be the same as PC. */
3074 overlay_unmapped_address (CORE_ADDR pc
, struct obj_section
*section
)
3076 if (section_is_overlay (section
) && pc_in_mapped_range (pc
, section
))
3078 bfd
*abfd
= section
->objfile
->obfd
;
3079 asection
*bfd_section
= section
->the_bfd_section
;
3081 return pc
+ bfd_section_lma (abfd
, bfd_section
)
3082 - bfd_section_vma (abfd
, bfd_section
);
3088 /* Function: overlay_mapped_address (PC, SECTION)
3089 Returns the address corresponding to PC in the mapped (runtime) range.
3090 May be the same as PC. */
3093 overlay_mapped_address (CORE_ADDR pc
, struct obj_section
*section
)
3095 if (section_is_overlay (section
) && pc_in_unmapped_range (pc
, section
))
3097 bfd
*abfd
= section
->objfile
->obfd
;
3098 asection
*bfd_section
= section
->the_bfd_section
;
3100 return pc
+ bfd_section_vma (abfd
, bfd_section
)
3101 - bfd_section_lma (abfd
, bfd_section
);
3107 /* Function: symbol_overlayed_address
3108 Return one of two addresses (relative to the VMA or to the LMA),
3109 depending on whether the section is mapped or not. */
3112 symbol_overlayed_address (CORE_ADDR address
, struct obj_section
*section
)
3114 if (overlay_debugging
)
3116 /* If the symbol has no section, just return its regular address. */
3119 /* If the symbol's section is not an overlay, just return its
3121 if (!section_is_overlay (section
))
3123 /* If the symbol's section is mapped, just return its address. */
3124 if (section_is_mapped (section
))
3127 * HOWEVER: if the symbol is in an overlay section which is NOT mapped,
3128 * then return its LOADED address rather than its vma address!!
3130 return overlay_unmapped_address (address
, section
);
3135 /* Function: find_pc_overlay (PC)
3136 Return the best-match overlay section for PC:
3137 If PC matches a mapped overlay section's VMA, return that section.
3138 Else if PC matches an unmapped section's VMA, return that section.
3139 Else if PC matches an unmapped section's LMA, return that section. */
3141 struct obj_section
*
3142 find_pc_overlay (CORE_ADDR pc
)
3144 struct objfile
*objfile
;
3145 struct obj_section
*osect
, *best_match
= NULL
;
3147 if (overlay_debugging
)
3149 ALL_OBJSECTIONS (objfile
, osect
)
3150 if (section_is_overlay (osect
))
3152 if (pc_in_mapped_range (pc
, osect
))
3154 if (section_is_mapped (osect
))
3159 else if (pc_in_unmapped_range (pc
, osect
))
3166 /* Function: find_pc_mapped_section (PC)
3167 If PC falls into the VMA address range of an overlay section that is
3168 currently marked as MAPPED, return that section. Else return NULL. */
3170 struct obj_section
*
3171 find_pc_mapped_section (CORE_ADDR pc
)
3173 struct objfile
*objfile
;
3174 struct obj_section
*osect
;
3176 if (overlay_debugging
)
3178 ALL_OBJSECTIONS (objfile
, osect
)
3179 if (pc_in_mapped_range (pc
, osect
) && section_is_mapped (osect
))
3186 /* Function: list_overlays_command
3187 Print a list of mapped sections and their PC ranges. */
3190 list_overlays_command (const char *args
, int from_tty
)
3193 struct objfile
*objfile
;
3194 struct obj_section
*osect
;
3196 if (overlay_debugging
)
3198 ALL_OBJSECTIONS (objfile
, osect
)
3199 if (section_is_mapped (osect
))
3201 struct gdbarch
*gdbarch
= get_objfile_arch (objfile
);
3206 vma
= bfd_section_vma (objfile
->obfd
, osect
->the_bfd_section
);
3207 lma
= bfd_section_lma (objfile
->obfd
, osect
->the_bfd_section
);
3208 size
= bfd_get_section_size (osect
->the_bfd_section
);
3209 name
= bfd_section_name (objfile
->obfd
, osect
->the_bfd_section
);
3211 printf_filtered ("Section %s, loaded at ", name
);
3212 fputs_filtered (paddress (gdbarch
, lma
), gdb_stdout
);
3213 puts_filtered (" - ");
3214 fputs_filtered (paddress (gdbarch
, lma
+ size
), gdb_stdout
);
3215 printf_filtered (", mapped at ");
3216 fputs_filtered (paddress (gdbarch
, vma
), gdb_stdout
);
3217 puts_filtered (" - ");
3218 fputs_filtered (paddress (gdbarch
, vma
+ size
), gdb_stdout
);
3219 puts_filtered ("\n");
3225 printf_filtered (_("No sections are mapped.\n"));
3228 /* Function: map_overlay_command
3229 Mark the named section as mapped (ie. residing at its VMA address). */
3232 map_overlay_command (const char *args
, int from_tty
)
3234 struct objfile
*objfile
, *objfile2
;
3235 struct obj_section
*sec
, *sec2
;
3237 if (!overlay_debugging
)
3238 error (_("Overlay debugging not enabled. Use "
3239 "either the 'overlay auto' or\n"
3240 "the 'overlay manual' command."));
3242 if (args
== 0 || *args
== 0)
3243 error (_("Argument required: name of an overlay section"));
3245 /* First, find a section matching the user supplied argument. */
3246 ALL_OBJSECTIONS (objfile
, sec
)
3247 if (!strcmp (bfd_section_name (objfile
->obfd
, sec
->the_bfd_section
), args
))
3249 /* Now, check to see if the section is an overlay. */
3250 if (!section_is_overlay (sec
))
3251 continue; /* not an overlay section */
3253 /* Mark the overlay as "mapped". */
3254 sec
->ovly_mapped
= 1;
3256 /* Next, make a pass and unmap any sections that are
3257 overlapped by this new section: */
3258 ALL_OBJSECTIONS (objfile2
, sec2
)
3259 if (sec2
->ovly_mapped
&& sec
!= sec2
&& sections_overlap (sec
, sec2
))
3262 printf_unfiltered (_("Note: section %s unmapped by overlap\n"),
3263 bfd_section_name (objfile
->obfd
,
3264 sec2
->the_bfd_section
));
3265 sec2
->ovly_mapped
= 0; /* sec2 overlaps sec: unmap sec2. */
3269 error (_("No overlay section called %s"), args
);
3272 /* Function: unmap_overlay_command
3273 Mark the overlay section as unmapped
3274 (ie. resident in its LMA address range, rather than the VMA range). */
3277 unmap_overlay_command (const char *args
, int from_tty
)
3279 struct objfile
*objfile
;
3280 struct obj_section
*sec
= NULL
;
3282 if (!overlay_debugging
)
3283 error (_("Overlay debugging not enabled. "
3284 "Use either the 'overlay auto' or\n"
3285 "the 'overlay manual' command."));
3287 if (args
== 0 || *args
== 0)
3288 error (_("Argument required: name of an overlay section"));
3290 /* First, find a section matching the user supplied argument. */
3291 ALL_OBJSECTIONS (objfile
, sec
)
3292 if (!strcmp (bfd_section_name (objfile
->obfd
, sec
->the_bfd_section
), args
))
3294 if (!sec
->ovly_mapped
)
3295 error (_("Section %s is not mapped"), args
);
3296 sec
->ovly_mapped
= 0;
3299 error (_("No overlay section called %s"), args
);
3302 /* Function: overlay_auto_command
3303 A utility command to turn on overlay debugging.
3304 Possibly this should be done via a set/show command. */
3307 overlay_auto_command (const char *args
, int from_tty
)
3309 overlay_debugging
= ovly_auto
;
3310 enable_overlay_breakpoints ();
3312 printf_unfiltered (_("Automatic overlay debugging enabled."));
3315 /* Function: overlay_manual_command
3316 A utility command to turn on overlay debugging.
3317 Possibly this should be done via a set/show command. */
3320 overlay_manual_command (const char *args
, int from_tty
)
3322 overlay_debugging
= ovly_on
;
3323 disable_overlay_breakpoints ();
3325 printf_unfiltered (_("Overlay debugging enabled."));
3328 /* Function: overlay_off_command
3329 A utility command to turn on overlay debugging.
3330 Possibly this should be done via a set/show command. */
3333 overlay_off_command (const char *args
, int from_tty
)
3335 overlay_debugging
= ovly_off
;
3336 disable_overlay_breakpoints ();
3338 printf_unfiltered (_("Overlay debugging disabled."));
3342 overlay_load_command (const char *args
, int from_tty
)
3344 struct gdbarch
*gdbarch
= get_current_arch ();
3346 if (gdbarch_overlay_update_p (gdbarch
))
3347 gdbarch_overlay_update (gdbarch
, NULL
);
3349 error (_("This target does not know how to read its overlay state."));
3352 /* Function: overlay_command
3353 A place-holder for a mis-typed command. */
3355 /* Command list chain containing all defined "overlay" subcommands. */
3356 static struct cmd_list_element
*overlaylist
;
3359 overlay_command (const char *args
, int from_tty
)
3362 ("\"overlay\" must be followed by the name of an overlay command.\n");
3363 help_list (overlaylist
, "overlay ", all_commands
, gdb_stdout
);
3366 /* Target Overlays for the "Simplest" overlay manager:
3368 This is GDB's default target overlay layer. It works with the
3369 minimal overlay manager supplied as an example by Cygnus. The
3370 entry point is via a function pointer "gdbarch_overlay_update",
3371 so targets that use a different runtime overlay manager can
3372 substitute their own overlay_update function and take over the
3375 The overlay_update function pokes around in the target's data structures
3376 to see what overlays are mapped, and updates GDB's overlay mapping with
3379 In this simple implementation, the target data structures are as follows:
3380 unsigned _novlys; /# number of overlay sections #/
3381 unsigned _ovly_table[_novlys][4] = {
3382 {VMA, OSIZE, LMA, MAPPED}, /# one entry per overlay section #/
3383 {..., ..., ..., ...},
3385 unsigned _novly_regions; /# number of overlay regions #/
3386 unsigned _ovly_region_table[_novly_regions][3] = {
3387 {VMA, OSIZE, MAPPED_TO_LMA}, /# one entry per overlay region #/
3390 These functions will attempt to update GDB's mappedness state in the
3391 symbol section table, based on the target's mappedness state.
3393 To do this, we keep a cached copy of the target's _ovly_table, and
3394 attempt to detect when the cached copy is invalidated. The main
3395 entry point is "simple_overlay_update(SECT), which looks up SECT in
3396 the cached table and re-reads only the entry for that section from
3397 the target (whenever possible). */
3399 /* Cached, dynamically allocated copies of the target data structures: */
3400 static unsigned (*cache_ovly_table
)[4] = 0;
3401 static unsigned cache_novlys
= 0;
3402 static CORE_ADDR cache_ovly_table_base
= 0;
3405 VMA
, OSIZE
, LMA
, MAPPED
3408 /* Throw away the cached copy of _ovly_table. */
3411 simple_free_overlay_table (void)
3413 if (cache_ovly_table
)
3414 xfree (cache_ovly_table
);
3416 cache_ovly_table
= NULL
;
3417 cache_ovly_table_base
= 0;
3420 /* Read an array of ints of size SIZE from the target into a local buffer.
3421 Convert to host order. int LEN is number of ints. */
3424 read_target_long_array (CORE_ADDR memaddr
, unsigned int *myaddr
,
3425 int len
, int size
, enum bfd_endian byte_order
)
3427 /* FIXME (alloca): Not safe if array is very large. */
3428 gdb_byte
*buf
= (gdb_byte
*) alloca (len
* size
);
3431 read_memory (memaddr
, buf
, len
* size
);
3432 for (i
= 0; i
< len
; i
++)
3433 myaddr
[i
] = extract_unsigned_integer (size
* i
+ buf
, size
, byte_order
);
3436 /* Find and grab a copy of the target _ovly_table
3437 (and _novlys, which is needed for the table's size). */
3440 simple_read_overlay_table (void)
3442 struct bound_minimal_symbol novlys_msym
;
3443 struct bound_minimal_symbol ovly_table_msym
;
3444 struct gdbarch
*gdbarch
;
3446 enum bfd_endian byte_order
;
3448 simple_free_overlay_table ();
3449 novlys_msym
= lookup_minimal_symbol ("_novlys", NULL
, NULL
);
3450 if (! novlys_msym
.minsym
)
3452 error (_("Error reading inferior's overlay table: "
3453 "couldn't find `_novlys' variable\n"
3454 "in inferior. Use `overlay manual' mode."));
3458 ovly_table_msym
= lookup_bound_minimal_symbol ("_ovly_table");
3459 if (! ovly_table_msym
.minsym
)
3461 error (_("Error reading inferior's overlay table: couldn't find "
3462 "`_ovly_table' array\n"
3463 "in inferior. Use `overlay manual' mode."));
3467 gdbarch
= get_objfile_arch (ovly_table_msym
.objfile
);
3468 word_size
= gdbarch_long_bit (gdbarch
) / TARGET_CHAR_BIT
;
3469 byte_order
= gdbarch_byte_order (gdbarch
);
3471 cache_novlys
= read_memory_integer (BMSYMBOL_VALUE_ADDRESS (novlys_msym
),
3474 = (unsigned int (*)[4]) xmalloc (cache_novlys
* sizeof (*cache_ovly_table
));
3475 cache_ovly_table_base
= BMSYMBOL_VALUE_ADDRESS (ovly_table_msym
);
3476 read_target_long_array (cache_ovly_table_base
,
3477 (unsigned int *) cache_ovly_table
,
3478 cache_novlys
* 4, word_size
, byte_order
);
3480 return 1; /* SUCCESS */
3483 /* Function: simple_overlay_update_1
3484 A helper function for simple_overlay_update. Assuming a cached copy
3485 of _ovly_table exists, look through it to find an entry whose vma,
3486 lma and size match those of OSECT. Re-read the entry and make sure
3487 it still matches OSECT (else the table may no longer be valid).
3488 Set OSECT's mapped state to match the entry. Return: 1 for
3489 success, 0 for failure. */
3492 simple_overlay_update_1 (struct obj_section
*osect
)
3495 bfd
*obfd
= osect
->objfile
->obfd
;
3496 asection
*bsect
= osect
->the_bfd_section
;
3497 struct gdbarch
*gdbarch
= get_objfile_arch (osect
->objfile
);
3498 int word_size
= gdbarch_long_bit (gdbarch
) / TARGET_CHAR_BIT
;
3499 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
3501 for (i
= 0; i
< cache_novlys
; i
++)
3502 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (obfd
, bsect
)
3503 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (obfd
, bsect
))
3505 read_target_long_array (cache_ovly_table_base
+ i
* word_size
,
3506 (unsigned int *) cache_ovly_table
[i
],
3507 4, word_size
, byte_order
);
3508 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (obfd
, bsect
)
3509 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (obfd
, bsect
))
3511 osect
->ovly_mapped
= cache_ovly_table
[i
][MAPPED
];
3514 else /* Warning! Warning! Target's ovly table has changed! */
3520 /* Function: simple_overlay_update
3521 If OSECT is NULL, then update all sections' mapped state
3522 (after re-reading the entire target _ovly_table).
3523 If OSECT is non-NULL, then try to find a matching entry in the
3524 cached ovly_table and update only OSECT's mapped state.
3525 If a cached entry can't be found or the cache isn't valid, then
3526 re-read the entire cache, and go ahead and update all sections. */
3529 simple_overlay_update (struct obj_section
*osect
)
3531 struct objfile
*objfile
;
3533 /* Were we given an osect to look up? NULL means do all of them. */
3535 /* Have we got a cached copy of the target's overlay table? */
3536 if (cache_ovly_table
!= NULL
)
3538 /* Does its cached location match what's currently in the
3540 struct bound_minimal_symbol minsym
3541 = lookup_minimal_symbol ("_ovly_table", NULL
, NULL
);
3543 if (minsym
.minsym
== NULL
)
3544 error (_("Error reading inferior's overlay table: couldn't "
3545 "find `_ovly_table' array\n"
3546 "in inferior. Use `overlay manual' mode."));
3548 if (cache_ovly_table_base
== BMSYMBOL_VALUE_ADDRESS (minsym
))
3549 /* Then go ahead and try to look up this single section in
3551 if (simple_overlay_update_1 (osect
))
3552 /* Found it! We're done. */
3556 /* Cached table no good: need to read the entire table anew.
3557 Or else we want all the sections, in which case it's actually
3558 more efficient to read the whole table in one block anyway. */
3560 if (! simple_read_overlay_table ())
3563 /* Now may as well update all sections, even if only one was requested. */
3564 ALL_OBJSECTIONS (objfile
, osect
)
3565 if (section_is_overlay (osect
))
3568 bfd
*obfd
= osect
->objfile
->obfd
;
3569 asection
*bsect
= osect
->the_bfd_section
;
3571 for (i
= 0; i
< cache_novlys
; i
++)
3572 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (obfd
, bsect
)
3573 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (obfd
, bsect
))
3574 { /* obj_section matches i'th entry in ovly_table. */
3575 osect
->ovly_mapped
= cache_ovly_table
[i
][MAPPED
];
3576 break; /* finished with inner for loop: break out. */
3581 /* Set the output sections and output offsets for section SECTP in
3582 ABFD. The relocation code in BFD will read these offsets, so we
3583 need to be sure they're initialized. We map each section to itself,
3584 with no offset; this means that SECTP->vma will be honored. */
3587 symfile_dummy_outputs (bfd
*abfd
, asection
*sectp
, void *dummy
)
3589 sectp
->output_section
= sectp
;
3590 sectp
->output_offset
= 0;
3593 /* Default implementation for sym_relocate. */
3596 default_symfile_relocate (struct objfile
*objfile
, asection
*sectp
,
3599 /* Use sectp->owner instead of objfile->obfd. sectp may point to a
3601 bfd
*abfd
= sectp
->owner
;
3603 /* We're only interested in sections with relocation
3605 if ((sectp
->flags
& SEC_RELOC
) == 0)
3608 /* We will handle section offsets properly elsewhere, so relocate as if
3609 all sections begin at 0. */
3610 bfd_map_over_sections (abfd
, symfile_dummy_outputs
, NULL
);
3612 return bfd_simple_get_relocated_section_contents (abfd
, sectp
, buf
, NULL
);
3615 /* Relocate the contents of a debug section SECTP in ABFD. The
3616 contents are stored in BUF if it is non-NULL, or returned in a
3617 malloc'd buffer otherwise.
3619 For some platforms and debug info formats, shared libraries contain
3620 relocations against the debug sections (particularly for DWARF-2;
3621 one affected platform is PowerPC GNU/Linux, although it depends on
3622 the version of the linker in use). Also, ELF object files naturally
3623 have unresolved relocations for their debug sections. We need to apply
3624 the relocations in order to get the locations of symbols correct.
3625 Another example that may require relocation processing, is the
3626 DWARF-2 .eh_frame section in .o files, although it isn't strictly a
3630 symfile_relocate_debug_section (struct objfile
*objfile
,
3631 asection
*sectp
, bfd_byte
*buf
)
3633 gdb_assert (objfile
->sf
->sym_relocate
);
3635 return (*objfile
->sf
->sym_relocate
) (objfile
, sectp
, buf
);
3638 struct symfile_segment_data
*
3639 get_symfile_segment_data (bfd
*abfd
)
3641 const struct sym_fns
*sf
= find_sym_fns (abfd
);
3646 return sf
->sym_segments (abfd
);
3650 free_symfile_segment_data (struct symfile_segment_data
*data
)
3652 xfree (data
->segment_bases
);
3653 xfree (data
->segment_sizes
);
3654 xfree (data
->segment_info
);
3659 - DATA, containing segment addresses from the object file ABFD, and
3660 the mapping from ABFD's sections onto the segments that own them,
3662 - SEGMENT_BASES[0 .. NUM_SEGMENT_BASES - 1], holding the actual
3663 segment addresses reported by the target,
3664 store the appropriate offsets for each section in OFFSETS.
3666 If there are fewer entries in SEGMENT_BASES than there are segments
3667 in DATA, then apply SEGMENT_BASES' last entry to all the segments.
3669 If there are more entries, then ignore the extra. The target may
3670 not be able to distinguish between an empty data segment and a
3671 missing data segment; a missing text segment is less plausible. */
3674 symfile_map_offsets_to_segments (bfd
*abfd
,
3675 const struct symfile_segment_data
*data
,
3676 struct section_offsets
*offsets
,
3677 int num_segment_bases
,
3678 const CORE_ADDR
*segment_bases
)
3683 /* It doesn't make sense to call this function unless you have some
3684 segment base addresses. */
3685 gdb_assert (num_segment_bases
> 0);
3687 /* If we do not have segment mappings for the object file, we
3688 can not relocate it by segments. */
3689 gdb_assert (data
!= NULL
);
3690 gdb_assert (data
->num_segments
> 0);
3692 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
3694 int which
= data
->segment_info
[i
];
3696 gdb_assert (0 <= which
&& which
<= data
->num_segments
);
3698 /* Don't bother computing offsets for sections that aren't
3699 loaded as part of any segment. */
3703 /* Use the last SEGMENT_BASES entry as the address of any extra
3704 segments mentioned in DATA->segment_info. */
3705 if (which
> num_segment_bases
)
3706 which
= num_segment_bases
;
3708 offsets
->offsets
[i
] = (segment_bases
[which
- 1]
3709 - data
->segment_bases
[which
- 1]);
3716 symfile_find_segment_sections (struct objfile
*objfile
)
3718 bfd
*abfd
= objfile
->obfd
;
3721 struct symfile_segment_data
*data
;
3723 data
= get_symfile_segment_data (objfile
->obfd
);
3727 if (data
->num_segments
!= 1 && data
->num_segments
!= 2)
3729 free_symfile_segment_data (data
);
3733 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
3735 int which
= data
->segment_info
[i
];
3739 if (objfile
->sect_index_text
== -1)
3740 objfile
->sect_index_text
= sect
->index
;
3742 if (objfile
->sect_index_rodata
== -1)
3743 objfile
->sect_index_rodata
= sect
->index
;
3745 else if (which
== 2)
3747 if (objfile
->sect_index_data
== -1)
3748 objfile
->sect_index_data
= sect
->index
;
3750 if (objfile
->sect_index_bss
== -1)
3751 objfile
->sect_index_bss
= sect
->index
;
3755 free_symfile_segment_data (data
);
3758 /* Listen for free_objfile events. */
3761 symfile_free_objfile (struct objfile
*objfile
)
3763 /* Remove the target sections owned by this objfile. */
3764 if (objfile
!= NULL
)
3765 remove_target_sections ((void *) objfile
);
3768 /* Wrapper around the quick_symbol_functions expand_symtabs_matching "method".
3769 Expand all symtabs that match the specified criteria.
3770 See quick_symbol_functions.expand_symtabs_matching for details. */
3773 expand_symtabs_matching
3774 (gdb::function_view
<expand_symtabs_file_matcher_ftype
> file_matcher
,
3775 gdb::function_view
<expand_symtabs_symbol_matcher_ftype
> symbol_matcher
,
3776 gdb::function_view
<expand_symtabs_exp_notify_ftype
> expansion_notify
,
3777 enum search_domain kind
)
3779 struct objfile
*objfile
;
3781 ALL_OBJFILES (objfile
)
3784 objfile
->sf
->qf
->expand_symtabs_matching (objfile
, file_matcher
,
3786 expansion_notify
, kind
);
3790 /* Wrapper around the quick_symbol_functions map_symbol_filenames "method".
3791 Map function FUN over every file.
3792 See quick_symbol_functions.map_symbol_filenames for details. */
3795 map_symbol_filenames (symbol_filename_ftype
*fun
, void *data
,
3798 struct objfile
*objfile
;
3800 ALL_OBJFILES (objfile
)
3803 objfile
->sf
->qf
->map_symbol_filenames (objfile
, fun
, data
,
3810 namespace selftests
{
3811 namespace filename_language
{
3813 static void test_filename_language ()
3815 /* This test messes up the filename_language_table global. */
3816 scoped_restore restore_flt
= make_scoped_restore (&filename_language_table
);
3818 /* Test deducing an unknown extension. */
3819 language lang
= deduce_language_from_filename ("myfile.blah");
3820 SELF_CHECK (lang
== language_unknown
);
3822 /* Test deducing a known extension. */
3823 lang
= deduce_language_from_filename ("myfile.c");
3824 SELF_CHECK (lang
== language_c
);
3826 /* Test adding a new extension using the internal API. */
3827 add_filename_language (".blah", language_pascal
);
3828 lang
= deduce_language_from_filename ("myfile.blah");
3829 SELF_CHECK (lang
== language_pascal
);
3833 test_set_ext_lang_command ()
3835 /* This test messes up the filename_language_table global. */
3836 scoped_restore restore_flt
= make_scoped_restore (&filename_language_table
);
3838 /* Confirm that the .hello extension is not known. */
3839 language lang
= deduce_language_from_filename ("cake.hello");
3840 SELF_CHECK (lang
== language_unknown
);
3842 /* Test adding a new extension using the CLI command. */
3843 gdb::unique_xmalloc_ptr
<char> args_holder (xstrdup (".hello rust"));
3844 ext_args
= args_holder
.get ();
3845 set_ext_lang_command (NULL
, 1, NULL
);
3847 lang
= deduce_language_from_filename ("cake.hello");
3848 SELF_CHECK (lang
== language_rust
);
3850 /* Test overriding an existing extension using the CLI command. */
3851 int size_before
= filename_language_table
.size ();
3852 args_holder
.reset (xstrdup (".hello pascal"));
3853 ext_args
= args_holder
.get ();
3854 set_ext_lang_command (NULL
, 1, NULL
);
3855 int size_after
= filename_language_table
.size ();
3857 lang
= deduce_language_from_filename ("cake.hello");
3858 SELF_CHECK (lang
== language_pascal
);
3859 SELF_CHECK (size_before
== size_after
);
3862 } /* namespace filename_language */
3863 } /* namespace selftests */
3865 #endif /* GDB_SELF_TEST */
3868 _initialize_symfile (void)
3870 struct cmd_list_element
*c
;
3872 observer_attach_free_objfile (symfile_free_objfile
);
3874 c
= add_cmd ("symbol-file", class_files
, symbol_file_command
, _("\
3875 Load symbol table from executable file FILE.\n\
3876 The `file' command can also load symbol tables, as well as setting the file\n\
3877 to execute."), &cmdlist
);
3878 set_cmd_completer (c
, filename_completer
);
3880 c
= add_cmd ("add-symbol-file", class_files
, add_symbol_file_command
, _("\
3881 Load symbols from FILE, assuming FILE has been dynamically loaded.\n\
3882 Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR>\
3883 ...]\nADDR is the starting address of the file's text.\n\
3884 The optional arguments are section-name section-address pairs and\n\
3885 should be specified if the data and bss segments are not contiguous\n\
3886 with the text. SECT is a section name to be loaded at SECT_ADDR."),
3888 set_cmd_completer (c
, filename_completer
);
3890 c
= add_cmd ("remove-symbol-file", class_files
,
3891 remove_symbol_file_command
, _("\
3892 Remove a symbol file added via the add-symbol-file command.\n\
3893 Usage: remove-symbol-file FILENAME\n\
3894 remove-symbol-file -a ADDRESS\n\
3895 The file to remove can be identified by its filename or by an address\n\
3896 that lies within the boundaries of this symbol file in memory."),
3899 c
= add_cmd ("load", class_files
, load_command
, _("\
3900 Dynamically load FILE into the running program, and record its symbols\n\
3901 for access from GDB.\n\
3902 An optional load OFFSET may also be given as a literal address.\n\
3903 When OFFSET is provided, FILE must also be provided. FILE can be provided\n\
3905 Usage: load [FILE] [OFFSET]"), &cmdlist
);
3906 set_cmd_completer (c
, filename_completer
);
3908 add_prefix_cmd ("overlay", class_support
, overlay_command
,
3909 _("Commands for debugging overlays."), &overlaylist
,
3910 "overlay ", 0, &cmdlist
);
3912 add_com_alias ("ovly", "overlay", class_alias
, 1);
3913 add_com_alias ("ov", "overlay", class_alias
, 1);
3915 add_cmd ("map-overlay", class_support
, map_overlay_command
,
3916 _("Assert that an overlay section is mapped."), &overlaylist
);
3918 add_cmd ("unmap-overlay", class_support
, unmap_overlay_command
,
3919 _("Assert that an overlay section is unmapped."), &overlaylist
);
3921 add_cmd ("list-overlays", class_support
, list_overlays_command
,
3922 _("List mappings of overlay sections."), &overlaylist
);
3924 add_cmd ("manual", class_support
, overlay_manual_command
,
3925 _("Enable overlay debugging."), &overlaylist
);
3926 add_cmd ("off", class_support
, overlay_off_command
,
3927 _("Disable overlay debugging."), &overlaylist
);
3928 add_cmd ("auto", class_support
, overlay_auto_command
,
3929 _("Enable automatic overlay debugging."), &overlaylist
);
3930 add_cmd ("load-target", class_support
, overlay_load_command
,
3931 _("Read the overlay mapping state from the target."), &overlaylist
);
3933 /* Filename extension to source language lookup table: */
3934 add_setshow_string_noescape_cmd ("extension-language", class_files
,
3936 Set mapping between filename extension and source language."), _("\
3937 Show mapping between filename extension and source language."), _("\
3938 Usage: set extension-language .foo bar"),
3939 set_ext_lang_command
,
3941 &setlist
, &showlist
);
3943 add_info ("extensions", info_ext_lang_command
,
3944 _("All filename extensions associated with a source language."));
3946 add_setshow_optional_filename_cmd ("debug-file-directory", class_support
,
3947 &debug_file_directory
, _("\
3948 Set the directories where separate debug symbols are searched for."), _("\
3949 Show the directories where separate debug symbols are searched for."), _("\
3950 Separate debug symbols are first searched for in the same\n\
3951 directory as the binary, then in the `" DEBUG_SUBDIRECTORY
"' subdirectory,\n\
3952 and lastly at the path of the directory of the binary with\n\
3953 each global debug-file-directory component prepended."),
3955 show_debug_file_directory
,
3956 &setlist
, &showlist
);
3958 add_setshow_enum_cmd ("symbol-loading", no_class
,
3959 print_symbol_loading_enums
, &print_symbol_loading
,
3961 Set printing of symbol loading messages."), _("\
3962 Show printing of symbol loading messages."), _("\
3963 off == turn all messages off\n\
3964 brief == print messages for the executable,\n\
3965 and brief messages for shared libraries\n\
3966 full == print messages for the executable,\n\
3967 and messages for each shared library."),
3970 &setprintlist
, &showprintlist
);
3972 add_setshow_boolean_cmd ("separate-debug-file", no_class
,
3973 &separate_debug_file_debug
, _("\
3974 Set printing of separate debug info file search debug."), _("\
3975 Show printing of separate debug info file search debug."), _("\
3976 When on, GDB prints the searched locations while looking for separate debug \
3977 info files."), NULL
, NULL
, &setdebuglist
, &showdebuglist
);
3980 selftests::register_test
3981 ("filename_language", selftests::filename_language::test_filename_language
);
3982 selftests::register_test
3983 ("set_ext_lang_command",
3984 selftests::filename_language::test_set_ext_lang_command
);