1 /* Interface between GDB and target environments, including files and processes
3 Copyright (C) 1990-2012 Free Software Foundation, Inc.
5 Contributed by Cygnus Support. Written by John Gilmore.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
22 #if !defined (TARGET_H)
30 struct bp_target_info
;
32 struct target_section_table
;
33 struct trace_state_variable
;
37 struct static_tracepoint_marker
;
38 struct traceframe_info
;
41 /* This include file defines the interface between the main part
42 of the debugger, and the part which is target-specific, or
43 specific to the communications interface between us and the
46 A TARGET is an interface between the debugger and a particular
47 kind of file or process. Targets can be STACKED in STRATA,
48 so that more than one target can potentially respond to a request.
49 In particular, memory accesses will walk down the stack of targets
50 until they find a target that is interested in handling that particular
51 address. STRATA are artificial boundaries on the stack, within
52 which particular kinds of targets live. Strata exist so that
53 people don't get confused by pushing e.g. a process target and then
54 a file target, and wondering why they can't see the current values
55 of variables any more (the file target is handling them and they
56 never get to the process target). So when you push a file target,
57 it goes into the file stratum, which is always below the process
64 #include "gdb_signals.h"
68 dummy_stratum
, /* The lowest of the low */
69 file_stratum
, /* Executable files, etc */
70 process_stratum
, /* Executing processes or core dump files */
71 thread_stratum
, /* Executing threads */
72 record_stratum
, /* Support record debugging */
73 arch_stratum
/* Architecture overrides */
76 enum thread_control_capabilities
78 tc_none
= 0, /* Default: can't control thread execution. */
79 tc_schedlock
= 1, /* Can lock the thread scheduler. */
82 /* Stuff for target_wait. */
84 /* Generally, what has the program done? */
87 /* The program has exited. The exit status is in value.integer. */
88 TARGET_WAITKIND_EXITED
,
90 /* The program has stopped with a signal. Which signal is in
92 TARGET_WAITKIND_STOPPED
,
94 /* The program has terminated with a signal. Which signal is in
96 TARGET_WAITKIND_SIGNALLED
,
98 /* The program is letting us know that it dynamically loaded something
99 (e.g. it called load(2) on AIX). */
100 TARGET_WAITKIND_LOADED
,
102 /* The program has forked. A "related" process' PTID is in
103 value.related_pid. I.e., if the child forks, value.related_pid
104 is the parent's ID. */
106 TARGET_WAITKIND_FORKED
,
108 /* The program has vforked. A "related" process's PTID is in
109 value.related_pid. */
111 TARGET_WAITKIND_VFORKED
,
113 /* The program has exec'ed a new executable file. The new file's
114 pathname is pointed to by value.execd_pathname. */
116 TARGET_WAITKIND_EXECD
,
118 /* The program had previously vforked, and now the child is done
119 with the shared memory region, because it exec'ed or exited.
120 Note that the event is reported to the vfork parent. This is
121 only used if GDB did not stay attached to the vfork child,
122 otherwise, a TARGET_WAITKIND_EXECD or
123 TARGET_WAITKIND_EXIT|SIGNALLED event associated with the child
124 has the same effect. */
125 TARGET_WAITKIND_VFORK_DONE
,
127 /* The program has entered or returned from a system call. On
128 HP-UX, this is used in the hardware watchpoint implementation.
129 The syscall's unique integer ID number is in value.syscall_id. */
131 TARGET_WAITKIND_SYSCALL_ENTRY
,
132 TARGET_WAITKIND_SYSCALL_RETURN
,
134 /* Nothing happened, but we stopped anyway. This perhaps should be handled
135 within target_wait, but I'm not sure target_wait should be resuming the
137 TARGET_WAITKIND_SPURIOUS
,
139 /* An event has occured, but we should wait again.
140 Remote_async_wait() returns this when there is an event
141 on the inferior, but the rest of the world is not interested in
142 it. The inferior has not stopped, but has just sent some output
143 to the console, for instance. In this case, we want to go back
144 to the event loop and wait there for another event from the
145 inferior, rather than being stuck in the remote_async_wait()
146 function. sThis way the event loop is responsive to other events,
147 like for instance the user typing. */
148 TARGET_WAITKIND_IGNORE
,
150 /* The target has run out of history information,
151 and cannot run backward any further. */
152 TARGET_WAITKIND_NO_HISTORY
,
154 /* There are no resumed children left in the program. */
155 TARGET_WAITKIND_NO_RESUMED
158 struct target_waitstatus
160 enum target_waitkind kind
;
162 /* Forked child pid, execd pathname, exit status, signal number or
167 enum target_signal sig
;
169 char *execd_pathname
;
175 /* Options that can be passed to target_wait. */
177 /* Return immediately if there's no event already queued. If this
178 options is not requested, target_wait blocks waiting for an
180 #define TARGET_WNOHANG 1
182 /* The structure below stores information about a system call.
183 It is basically used in the "catch syscall" command, and in
184 every function that gives information about a system call.
186 It's also good to mention that its fields represent everything
187 that we currently know about a syscall in GDB. */
190 /* The syscall number. */
193 /* The syscall name. */
197 /* Return a pretty printed form of target_waitstatus.
198 Space for the result is malloc'd, caller must free. */
199 extern char *target_waitstatus_to_string (const struct target_waitstatus
*);
201 /* Possible types of events that the inferior handler will have to
203 enum inferior_event_type
205 /* Process a normal inferior event which will result in target_wait
208 /* We are called because a timer went off. */
210 /* We are called to do stuff after the inferior stops. */
212 /* We are called to do some stuff after the inferior stops, but we
213 are expected to reenter the proceed() and
214 handle_inferior_event() functions. This is used only in case of
215 'step n' like commands. */
219 /* Target objects which can be transfered using target_read,
220 target_write, et cetera. */
224 /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
226 /* SPU target specific transfer. See "spu-tdep.c". */
228 /* Transfer up-to LEN bytes of memory starting at OFFSET. */
229 TARGET_OBJECT_MEMORY
,
230 /* Memory, avoiding GDB's data cache and trusting the executable.
231 Target implementations of to_xfer_partial never need to handle
232 this object, and most callers should not use it. */
233 TARGET_OBJECT_RAW_MEMORY
,
234 /* Memory known to be part of the target's stack. This is cached even
235 if it is not in a region marked as such, since it is known to be
237 TARGET_OBJECT_STACK_MEMORY
,
238 /* Kernel Unwind Table. See "ia64-tdep.c". */
239 TARGET_OBJECT_UNWIND_TABLE
,
240 /* Transfer auxilliary vector. */
242 /* StackGhost cookie. See "sparc-tdep.c". */
243 TARGET_OBJECT_WCOOKIE
,
244 /* Target memory map in XML format. */
245 TARGET_OBJECT_MEMORY_MAP
,
246 /* Flash memory. This object can be used to write contents to
247 a previously erased flash memory. Using it without erasing
248 flash can have unexpected results. Addresses are physical
249 address on target, and not relative to flash start. */
251 /* Available target-specific features, e.g. registers and coprocessors.
252 See "target-descriptions.c". ANNEX should never be empty. */
253 TARGET_OBJECT_AVAILABLE_FEATURES
,
254 /* Currently loaded libraries, in XML format. */
255 TARGET_OBJECT_LIBRARIES
,
256 /* Currently loaded libraries specific for SVR4 systems, in XML format. */
257 TARGET_OBJECT_LIBRARIES_SVR4
,
258 /* Get OS specific data. The ANNEX specifies the type (running
259 processes, etc.). The data being transfered is expected to follow
260 the DTD specified in features/osdata.dtd. */
261 TARGET_OBJECT_OSDATA
,
262 /* Extra signal info. Usually the contents of `siginfo_t' on unix
264 TARGET_OBJECT_SIGNAL_INFO
,
265 /* The list of threads that are being debugged. */
266 TARGET_OBJECT_THREADS
,
267 /* Collected static trace data. */
268 TARGET_OBJECT_STATIC_TRACE_DATA
,
269 /* The HP-UX registers (those that can be obtained or modified by using
270 the TT_LWP_RUREGS/TT_LWP_WUREGS ttrace requests). */
271 TARGET_OBJECT_HPUX_UREGS
,
272 /* The HP-UX shared library linkage pointer. ANNEX should be a string
273 image of the code address whose linkage pointer we are looking for.
275 The size of the data transfered is always 8 bytes (the size of an
277 TARGET_OBJECT_HPUX_SOLIB_GOT
,
278 /* Traceframe info, in XML format. */
279 TARGET_OBJECT_TRACEFRAME_INFO
,
280 /* Load maps for FDPIC systems. */
282 /* Darwin dynamic linker info data. */
283 TARGET_OBJECT_DARWIN_DYLD_INFO
284 /* Possible future objects: TARGET_OBJECT_FILE, ... */
287 /* Enumeration of the kinds of traceframe searches that a target may
288 be able to perform. */
299 typedef struct static_tracepoint_marker
*static_tracepoint_marker_p
;
300 DEF_VEC_P(static_tracepoint_marker_p
);
302 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
303 OBJECT. The OFFSET, for a seekable object, specifies the
304 starting point. The ANNEX can be used to provide additional
305 data-specific information to the target.
307 Return the number of bytes actually transfered, or -1 if the
308 transfer is not supported or otherwise fails. Return of a positive
309 value less than LEN indicates that no further transfer is possible.
310 Unlike the raw to_xfer_partial interface, callers of these
311 functions do not need to retry partial transfers. */
313 extern LONGEST
target_read (struct target_ops
*ops
,
314 enum target_object object
,
315 const char *annex
, gdb_byte
*buf
,
316 ULONGEST offset
, LONGEST len
);
318 struct memory_read_result
320 /* First address that was read. */
322 /* Past-the-end address. */
327 typedef struct memory_read_result memory_read_result_s
;
328 DEF_VEC_O(memory_read_result_s
);
330 extern void free_memory_read_result_vector (void *);
332 extern VEC(memory_read_result_s
)* read_memory_robust (struct target_ops
*ops
,
336 extern LONGEST
target_write (struct target_ops
*ops
,
337 enum target_object object
,
338 const char *annex
, const gdb_byte
*buf
,
339 ULONGEST offset
, LONGEST len
);
341 /* Similar to target_write, except that it also calls PROGRESS with
342 the number of bytes written and the opaque BATON after every
343 successful partial write (and before the first write). This is
344 useful for progress reporting and user interaction while writing
345 data. To abort the transfer, the progress callback can throw an
348 LONGEST
target_write_with_progress (struct target_ops
*ops
,
349 enum target_object object
,
350 const char *annex
, const gdb_byte
*buf
,
351 ULONGEST offset
, LONGEST len
,
352 void (*progress
) (ULONGEST
, void *),
355 /* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will
356 be read using OPS. The return value will be -1 if the transfer
357 fails or is not supported; 0 if the object is empty; or the length
358 of the object otherwise. If a positive value is returned, a
359 sufficiently large buffer will be allocated using xmalloc and
360 returned in *BUF_P containing the contents of the object.
362 This method should be used for objects sufficiently small to store
363 in a single xmalloc'd buffer, when no fixed bound on the object's
364 size is known in advance. Don't try to read TARGET_OBJECT_MEMORY
365 through this function. */
367 extern LONGEST
target_read_alloc (struct target_ops
*ops
,
368 enum target_object object
,
369 const char *annex
, gdb_byte
**buf_p
);
371 /* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and
372 returned as a string, allocated using xmalloc. If an error occurs
373 or the transfer is unsupported, NULL is returned. Empty objects
374 are returned as allocated but empty strings. A warning is issued
375 if the result contains any embedded NUL bytes. */
377 extern char *target_read_stralloc (struct target_ops
*ops
,
378 enum target_object object
,
381 /* Wrappers to target read/write that perform memory transfers. They
382 throw an error if the memory transfer fails.
384 NOTE: cagney/2003-10-23: The naming schema is lifted from
385 "frame.h". The parameter order is lifted from get_frame_memory,
386 which in turn lifted it from read_memory. */
388 extern void get_target_memory (struct target_ops
*ops
, CORE_ADDR addr
,
389 gdb_byte
*buf
, LONGEST len
);
390 extern ULONGEST
get_target_memory_unsigned (struct target_ops
*ops
,
391 CORE_ADDR addr
, int len
,
392 enum bfd_endian byte_order
);
394 struct thread_info
; /* fwd decl for parameter list below: */
398 struct target_ops
*beneath
; /* To the target under this one. */
399 char *to_shortname
; /* Name this target type */
400 char *to_longname
; /* Name for printing */
401 char *to_doc
; /* Documentation. Does not include trailing
402 newline, and starts with a one-line descrip-
403 tion (probably similar to to_longname). */
404 /* Per-target scratch pad. */
406 /* The open routine takes the rest of the parameters from the
407 command, and (if successful) pushes a new target onto the
408 stack. Targets should supply this routine, if only to provide
410 void (*to_open
) (char *, int);
411 /* Old targets with a static target vector provide "to_close".
412 New re-entrant targets provide "to_xclose" and that is expected
413 to xfree everything (including the "struct target_ops"). */
414 void (*to_xclose
) (struct target_ops
*targ
, int quitting
);
415 void (*to_close
) (int);
416 void (*to_attach
) (struct target_ops
*ops
, char *, int);
417 void (*to_post_attach
) (int);
418 void (*to_detach
) (struct target_ops
*ops
, char *, int);
419 void (*to_disconnect
) (struct target_ops
*, char *, int);
420 void (*to_resume
) (struct target_ops
*, ptid_t
, int, enum target_signal
);
421 ptid_t (*to_wait
) (struct target_ops
*,
422 ptid_t
, struct target_waitstatus
*, int);
423 void (*to_fetch_registers
) (struct target_ops
*, struct regcache
*, int);
424 void (*to_store_registers
) (struct target_ops
*, struct regcache
*, int);
425 void (*to_prepare_to_store
) (struct regcache
*);
427 /* Transfer LEN bytes of memory between GDB address MYADDR and
428 target address MEMADDR. If WRITE, transfer them to the target, else
429 transfer them from the target. TARGET is the target from which we
432 Return value, N, is one of the following:
434 0 means that we can't handle this. If errno has been set, it is the
435 error which prevented us from doing it (FIXME: What about bfd_error?).
437 positive (call it N) means that we have transferred N bytes
438 starting at MEMADDR. We might be able to handle more bytes
439 beyond this length, but no promises.
441 negative (call its absolute value N) means that we cannot
442 transfer right at MEMADDR, but we could transfer at least
443 something at MEMADDR + N.
445 NOTE: cagney/2004-10-01: This has been entirely superseeded by
446 to_xfer_partial and inferior inheritance. */
448 int (*deprecated_xfer_memory
) (CORE_ADDR memaddr
, gdb_byte
*myaddr
,
450 struct mem_attrib
*attrib
,
451 struct target_ops
*target
);
453 void (*to_files_info
) (struct target_ops
*);
454 int (*to_insert_breakpoint
) (struct gdbarch
*, struct bp_target_info
*);
455 int (*to_remove_breakpoint
) (struct gdbarch
*, struct bp_target_info
*);
456 int (*to_can_use_hw_breakpoint
) (int, int, int);
457 int (*to_ranged_break_num_registers
) (struct target_ops
*);
458 int (*to_insert_hw_breakpoint
) (struct gdbarch
*, struct bp_target_info
*);
459 int (*to_remove_hw_breakpoint
) (struct gdbarch
*, struct bp_target_info
*);
461 /* Documentation of what the two routines below are expected to do is
462 provided with the corresponding target_* macros. */
463 int (*to_remove_watchpoint
) (CORE_ADDR
, int, int, struct expression
*);
464 int (*to_insert_watchpoint
) (CORE_ADDR
, int, int, struct expression
*);
466 int (*to_insert_mask_watchpoint
) (struct target_ops
*,
467 CORE_ADDR
, CORE_ADDR
, int);
468 int (*to_remove_mask_watchpoint
) (struct target_ops
*,
469 CORE_ADDR
, CORE_ADDR
, int);
470 int (*to_stopped_by_watchpoint
) (void);
471 int to_have_steppable_watchpoint
;
472 int to_have_continuable_watchpoint
;
473 int (*to_stopped_data_address
) (struct target_ops
*, CORE_ADDR
*);
474 int (*to_watchpoint_addr_within_range
) (struct target_ops
*,
475 CORE_ADDR
, CORE_ADDR
, int);
477 /* Documentation of this routine is provided with the corresponding
479 int (*to_region_ok_for_hw_watchpoint
) (CORE_ADDR
, int);
481 int (*to_can_accel_watchpoint_condition
) (CORE_ADDR
, int, int,
482 struct expression
*);
483 int (*to_masked_watch_num_registers
) (struct target_ops
*,
484 CORE_ADDR
, CORE_ADDR
);
485 void (*to_terminal_init
) (void);
486 void (*to_terminal_inferior
) (void);
487 void (*to_terminal_ours_for_output
) (void);
488 void (*to_terminal_ours
) (void);
489 void (*to_terminal_save_ours
) (void);
490 void (*to_terminal_info
) (char *, int);
491 void (*to_kill
) (struct target_ops
*);
492 void (*to_load
) (char *, int);
493 void (*to_create_inferior
) (struct target_ops
*,
494 char *, char *, char **, int);
495 void (*to_post_startup_inferior
) (ptid_t
);
496 int (*to_insert_fork_catchpoint
) (int);
497 int (*to_remove_fork_catchpoint
) (int);
498 int (*to_insert_vfork_catchpoint
) (int);
499 int (*to_remove_vfork_catchpoint
) (int);
500 int (*to_follow_fork
) (struct target_ops
*, int);
501 int (*to_insert_exec_catchpoint
) (int);
502 int (*to_remove_exec_catchpoint
) (int);
503 int (*to_set_syscall_catchpoint
) (int, int, int, int, int *);
504 int (*to_has_exited
) (int, int, int *);
505 void (*to_mourn_inferior
) (struct target_ops
*);
506 int (*to_can_run
) (void);
508 /* Documentation of this routine is provided with the corresponding
510 void (*to_pass_signals
) (int, unsigned char *);
512 int (*to_thread_alive
) (struct target_ops
*, ptid_t ptid
);
513 void (*to_find_new_threads
) (struct target_ops
*);
514 char *(*to_pid_to_str
) (struct target_ops
*, ptid_t
);
515 char *(*to_extra_thread_info
) (struct thread_info
*);
516 char *(*to_thread_name
) (struct thread_info
*);
517 void (*to_stop
) (ptid_t
);
518 void (*to_rcmd
) (char *command
, struct ui_file
*output
);
519 char *(*to_pid_to_exec_file
) (int pid
);
520 void (*to_log_command
) (const char *);
521 struct target_section_table
*(*to_get_section_table
) (struct target_ops
*);
522 enum strata to_stratum
;
523 int (*to_has_all_memory
) (struct target_ops
*);
524 int (*to_has_memory
) (struct target_ops
*);
525 int (*to_has_stack
) (struct target_ops
*);
526 int (*to_has_registers
) (struct target_ops
*);
527 int (*to_has_execution
) (struct target_ops
*, ptid_t
);
528 int to_has_thread_control
; /* control thread execution */
529 int to_attach_no_wait
;
530 /* ASYNC target controls */
531 int (*to_can_async_p
) (void);
532 int (*to_is_async_p
) (void);
533 void (*to_async
) (void (*) (enum inferior_event_type
, void *), void *);
534 int (*to_supports_non_stop
) (void);
535 /* find_memory_regions support method for gcore */
536 int (*to_find_memory_regions
) (find_memory_region_ftype func
, void *data
);
537 /* make_corefile_notes support method for gcore */
538 char * (*to_make_corefile_notes
) (bfd
*, int *);
539 /* get_bookmark support method for bookmarks */
540 gdb_byte
* (*to_get_bookmark
) (char *, int);
541 /* goto_bookmark support method for bookmarks */
542 void (*to_goto_bookmark
) (gdb_byte
*, int);
543 /* Return the thread-local address at OFFSET in the
544 thread-local storage for the thread PTID and the shared library
545 or executable file given by OBJFILE. If that block of
546 thread-local storage hasn't been allocated yet, this function
547 may return an error. */
548 CORE_ADDR (*to_get_thread_local_address
) (struct target_ops
*ops
,
550 CORE_ADDR load_module_addr
,
553 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
554 OBJECT. The OFFSET, for a seekable object, specifies the
555 starting point. The ANNEX can be used to provide additional
556 data-specific information to the target.
558 Return the number of bytes actually transfered, zero when no
559 further transfer is possible, and -1 when the transfer is not
560 supported. Return of a positive value smaller than LEN does
561 not indicate the end of the object, only the end of the
562 transfer; higher level code should continue transferring if
563 desired. This is handled in target.c.
565 The interface does not support a "retry" mechanism. Instead it
566 assumes that at least one byte will be transfered on each
569 NOTE: cagney/2003-10-17: The current interface can lead to
570 fragmented transfers. Lower target levels should not implement
571 hacks, such as enlarging the transfer, in an attempt to
572 compensate for this. Instead, the target stack should be
573 extended so that it implements supply/collect methods and a
574 look-aside object cache. With that available, the lowest
575 target can safely and freely "push" data up the stack.
577 See target_read and target_write for more information. One,
578 and only one, of readbuf or writebuf must be non-NULL. */
580 LONGEST (*to_xfer_partial
) (struct target_ops
*ops
,
581 enum target_object object
, const char *annex
,
582 gdb_byte
*readbuf
, const gdb_byte
*writebuf
,
583 ULONGEST offset
, LONGEST len
);
585 /* Returns the memory map for the target. A return value of NULL
586 means that no memory map is available. If a memory address
587 does not fall within any returned regions, it's assumed to be
588 RAM. The returned memory regions should not overlap.
590 The order of regions does not matter; target_memory_map will
591 sort regions by starting address. For that reason, this
592 function should not be called directly except via
595 This method should not cache data; if the memory map could
596 change unexpectedly, it should be invalidated, and higher
597 layers will re-fetch it. */
598 VEC(mem_region_s
) *(*to_memory_map
) (struct target_ops
*);
600 /* Erases the region of flash memory starting at ADDRESS, of
603 Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
604 on flash block boundaries, as reported by 'to_memory_map'. */
605 void (*to_flash_erase
) (struct target_ops
*,
606 ULONGEST address
, LONGEST length
);
608 /* Finishes a flash memory write sequence. After this operation
609 all flash memory should be available for writing and the result
610 of reading from areas written by 'to_flash_write' should be
611 equal to what was written. */
612 void (*to_flash_done
) (struct target_ops
*);
614 /* Describe the architecture-specific features of this target.
615 Returns the description found, or NULL if no description
617 const struct target_desc
*(*to_read_description
) (struct target_ops
*ops
);
619 /* Build the PTID of the thread on which a given task is running,
620 based on LWP and THREAD. These values are extracted from the
621 task Private_Data section of the Ada Task Control Block, and
622 their interpretation depends on the target. */
623 ptid_t (*to_get_ada_task_ptid
) (long lwp
, long thread
);
625 /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
626 Return 0 if *READPTR is already at the end of the buffer.
627 Return -1 if there is insufficient buffer for a whole entry.
628 Return 1 if an entry was read into *TYPEP and *VALP. */
629 int (*to_auxv_parse
) (struct target_ops
*ops
, gdb_byte
**readptr
,
630 gdb_byte
*endptr
, CORE_ADDR
*typep
, CORE_ADDR
*valp
);
632 /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
633 sequence of bytes in PATTERN with length PATTERN_LEN.
635 The result is 1 if found, 0 if not found, and -1 if there was an error
636 requiring halting of the search (e.g. memory read error).
637 If the pattern is found the address is recorded in FOUND_ADDRP. */
638 int (*to_search_memory
) (struct target_ops
*ops
,
639 CORE_ADDR start_addr
, ULONGEST search_space_len
,
640 const gdb_byte
*pattern
, ULONGEST pattern_len
,
641 CORE_ADDR
*found_addrp
);
643 /* Can target execute in reverse? */
644 int (*to_can_execute_reverse
) (void);
646 /* The direction the target is currently executing. Must be
647 implemented on targets that support reverse execution and async
648 mode. The default simply returns forward execution. */
649 enum exec_direction_kind (*to_execution_direction
) (void);
651 /* Does this target support debugging multiple processes
653 int (*to_supports_multi_process
) (void);
655 /* Does this target support enabling and disabling tracepoints while a trace
656 experiment is running? */
657 int (*to_supports_enable_disable_tracepoint
) (void);
659 /* Does this target support disabling address space randomization? */
660 int (*to_supports_disable_randomization
) (void);
662 /* Does this target support the tracenz bytecode for string collection? */
663 int (*to_supports_string_tracing
) (void);
665 /* Determine current architecture of thread PTID.
667 The target is supposed to determine the architecture of the code where
668 the target is currently stopped at (on Cell, if a target is in spu_run,
669 to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
670 This is architecture used to perform decr_pc_after_break adjustment,
671 and also determines the frame architecture of the innermost frame.
672 ptrace operations need to operate according to target_gdbarch.
674 The default implementation always returns target_gdbarch. */
675 struct gdbarch
*(*to_thread_architecture
) (struct target_ops
*, ptid_t
);
677 /* Determine current address space of thread PTID.
679 The default implementation always returns the inferior's
681 struct address_space
*(*to_thread_address_space
) (struct target_ops
*,
684 /* Target file operations. */
686 /* Open FILENAME on the target, using FLAGS and MODE. Return a
687 target file descriptor, or -1 if an error occurs (and set
689 int (*to_fileio_open
) (const char *filename
, int flags
, int mode
,
692 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
693 Return the number of bytes written, or -1 if an error occurs
694 (and set *TARGET_ERRNO). */
695 int (*to_fileio_pwrite
) (int fd
, const gdb_byte
*write_buf
, int len
,
696 ULONGEST offset
, int *target_errno
);
698 /* Read up to LEN bytes FD on the target into READ_BUF.
699 Return the number of bytes read, or -1 if an error occurs
700 (and set *TARGET_ERRNO). */
701 int (*to_fileio_pread
) (int fd
, gdb_byte
*read_buf
, int len
,
702 ULONGEST offset
, int *target_errno
);
704 /* Close FD on the target. Return 0, or -1 if an error occurs
705 (and set *TARGET_ERRNO). */
706 int (*to_fileio_close
) (int fd
, int *target_errno
);
708 /* Unlink FILENAME on the target. Return 0, or -1 if an error
709 occurs (and set *TARGET_ERRNO). */
710 int (*to_fileio_unlink
) (const char *filename
, int *target_errno
);
712 /* Read value of symbolic link FILENAME on the target. Return a
713 null-terminated string allocated via xmalloc, or NULL if an error
714 occurs (and set *TARGET_ERRNO). */
715 char *(*to_fileio_readlink
) (const char *filename
, int *target_errno
);
718 /* Implement the "info proc" command. */
719 void (*to_info_proc
) (struct target_ops
*, char *, enum info_proc_what
);
721 /* Tracepoint-related operations. */
723 /* Prepare the target for a tracing run. */
724 void (*to_trace_init
) (void);
726 /* Send full details of a tracepoint location to the target. */
727 void (*to_download_tracepoint
) (struct bp_location
*location
);
729 /* Is the target able to download tracepoint locations in current
731 int (*to_can_download_tracepoint
) (void);
733 /* Send full details of a trace state variable to the target. */
734 void (*to_download_trace_state_variable
) (struct trace_state_variable
*tsv
);
736 /* Enable a tracepoint on the target. */
737 void (*to_enable_tracepoint
) (struct bp_location
*location
);
739 /* Disable a tracepoint on the target. */
740 void (*to_disable_tracepoint
) (struct bp_location
*location
);
742 /* Inform the target info of memory regions that are readonly
743 (such as text sections), and so it should return data from
744 those rather than look in the trace buffer. */
745 void (*to_trace_set_readonly_regions
) (void);
747 /* Start a trace run. */
748 void (*to_trace_start
) (void);
750 /* Get the current status of a tracing run. */
751 int (*to_get_trace_status
) (struct trace_status
*ts
);
753 void (*to_get_tracepoint_status
) (struct breakpoint
*tp
,
754 struct uploaded_tp
*utp
);
756 /* Stop a trace run. */
757 void (*to_trace_stop
) (void);
759 /* Ask the target to find a trace frame of the given type TYPE,
760 using NUM, ADDR1, and ADDR2 as search parameters. Returns the
761 number of the trace frame, and also the tracepoint number at
762 TPP. If no trace frame matches, return -1. May throw if the
764 int (*to_trace_find
) (enum trace_find_type type
, int num
,
765 ULONGEST addr1
, ULONGEST addr2
, int *tpp
);
767 /* Get the value of the trace state variable number TSV, returning
768 1 if the value is known and writing the value itself into the
769 location pointed to by VAL, else returning 0. */
770 int (*to_get_trace_state_variable_value
) (int tsv
, LONGEST
*val
);
772 int (*to_save_trace_data
) (const char *filename
);
774 int (*to_upload_tracepoints
) (struct uploaded_tp
**utpp
);
776 int (*to_upload_trace_state_variables
) (struct uploaded_tsv
**utsvp
);
778 LONGEST (*to_get_raw_trace_data
) (gdb_byte
*buf
,
779 ULONGEST offset
, LONGEST len
);
781 /* Get the minimum length of instruction on which a fast tracepoint
782 may be set on the target. If this operation is unsupported,
783 return -1. If for some reason the minimum length cannot be
784 determined, return 0. */
785 int (*to_get_min_fast_tracepoint_insn_len
) (void);
787 /* Set the target's tracing behavior in response to unexpected
788 disconnection - set VAL to 1 to keep tracing, 0 to stop. */
789 void (*to_set_disconnected_tracing
) (int val
);
790 void (*to_set_circular_trace_buffer
) (int val
);
792 /* Add/change textual notes about the trace run, returning 1 if
793 successful, 0 otherwise. */
794 int (*to_set_trace_notes
) (char *user
, char *notes
, char* stopnotes
);
796 /* Return the processor core that thread PTID was last seen on.
797 This information is updated only when:
798 - update_thread_list is called
800 If the core cannot be determined -- either for the specified
801 thread, or right now, or in this debug session, or for this
802 target -- return -1. */
803 int (*to_core_of_thread
) (struct target_ops
*, ptid_t ptid
);
805 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
806 matches the contents of [DATA,DATA+SIZE). Returns 1 if there's
807 a match, 0 if there's a mismatch, and -1 if an error is
808 encountered while reading memory. */
809 int (*to_verify_memory
) (struct target_ops
*, const gdb_byte
*data
,
810 CORE_ADDR memaddr
, ULONGEST size
);
812 /* Return the address of the start of the Thread Information Block
813 a Windows OS specific feature. */
814 int (*to_get_tib_address
) (ptid_t ptid
, CORE_ADDR
*addr
);
816 /* Send the new settings of write permission variables. */
817 void (*to_set_permissions
) (void);
819 /* Look for a static tracepoint marker at ADDR, and fill in MARKER
820 with its details. Return 1 on success, 0 on failure. */
821 int (*to_static_tracepoint_marker_at
) (CORE_ADDR
,
822 struct static_tracepoint_marker
*marker
);
824 /* Return a vector of all tracepoints markers string id ID, or all
825 markers if ID is NULL. */
826 VEC(static_tracepoint_marker_p
) *(*to_static_tracepoint_markers_by_strid
)
829 /* Return a traceframe info object describing the current
830 traceframe's contents. This method should not cache data;
831 higher layers take care of caching, invalidating, and
832 re-fetching when necessary. */
833 struct traceframe_info
*(*to_traceframe_info
) (void);
836 /* Need sub-structure for target machine related rather than comm related?
840 /* Magic number for checking ops size. If a struct doesn't end with this
841 number, somebody changed the declaration but didn't change all the
842 places that initialize one. */
844 #define OPS_MAGIC 3840
846 /* The ops structure for our "current" target process. This should
847 never be NULL. If there is no target, it points to the dummy_target. */
849 extern struct target_ops current_target
;
851 /* Define easy words for doing these operations on our current target. */
853 #define target_shortname (current_target.to_shortname)
854 #define target_longname (current_target.to_longname)
856 /* Does whatever cleanup is required for a target that we are no
857 longer going to be calling. QUITTING indicates that GDB is exiting
858 and should not get hung on an error (otherwise it is important to
859 perform clean termination, even if it takes a while). This routine
860 is automatically always called after popping the target off the
861 target stack - the target's own methods are no longer available
862 through the target vector. Closing file descriptors and freeing all
863 memory allocated memory are typical things it should do. */
865 void target_close (struct target_ops
*targ
, int quitting
);
867 /* Attaches to a process on the target side. Arguments are as passed
868 to the `attach' command by the user. This routine can be called
869 when the target is not on the target-stack, if the target_can_run
870 routine returns 1; in that case, it must push itself onto the stack.
871 Upon exit, the target should be ready for normal operations, and
872 should be ready to deliver the status of the process immediately
873 (without waiting) to an upcoming target_wait call. */
875 void target_attach (char *, int);
877 /* Some targets don't generate traps when attaching to the inferior,
878 or their target_attach implementation takes care of the waiting.
879 These targets must set to_attach_no_wait. */
881 #define target_attach_no_wait \
882 (current_target.to_attach_no_wait)
884 /* The target_attach operation places a process under debugger control,
885 and stops the process.
887 This operation provides a target-specific hook that allows the
888 necessary bookkeeping to be performed after an attach completes. */
889 #define target_post_attach(pid) \
890 (*current_target.to_post_attach) (pid)
892 /* Takes a program previously attached to and detaches it.
893 The program may resume execution (some targets do, some don't) and will
894 no longer stop on signals, etc. We better not have left any breakpoints
895 in the program or it'll die when it hits one. ARGS is arguments
896 typed by the user (e.g. a signal to send the process). FROM_TTY
897 says whether to be verbose or not. */
899 extern void target_detach (char *, int);
901 /* Disconnect from the current target without resuming it (leaving it
902 waiting for a debugger). */
904 extern void target_disconnect (char *, int);
906 /* Resume execution of the target process PTID. STEP says whether to
907 single-step or to run free; SIGGNAL is the signal to be given to
908 the target, or TARGET_SIGNAL_0 for no signal. The caller may not
909 pass TARGET_SIGNAL_DEFAULT. */
911 extern void target_resume (ptid_t ptid
, int step
, enum target_signal signal
);
913 /* Wait for process pid to do something. PTID = -1 to wait for any
914 pid to do something. Return pid of child, or -1 in case of error;
915 store status through argument pointer STATUS. Note that it is
916 _NOT_ OK to throw_exception() out of target_wait() without popping
917 the debugging target from the stack; GDB isn't prepared to get back
918 to the prompt with a debugging target but without the frame cache,
919 stop_pc, etc., set up. OPTIONS is a bitwise OR of TARGET_W*
922 extern ptid_t
target_wait (ptid_t ptid
, struct target_waitstatus
*status
,
925 /* Fetch at least register REGNO, or all regs if regno == -1. No result. */
927 extern void target_fetch_registers (struct regcache
*regcache
, int regno
);
929 /* Store at least register REGNO, or all regs if REGNO == -1.
930 It can store as many registers as it wants to, so target_prepare_to_store
931 must have been previously called. Calls error() if there are problems. */
933 extern void target_store_registers (struct regcache
*regcache
, int regs
);
935 /* Get ready to modify the registers array. On machines which store
936 individual registers, this doesn't need to do anything. On machines
937 which store all the registers in one fell swoop, this makes sure
938 that REGISTERS contains all the registers from the program being
941 #define target_prepare_to_store(regcache) \
942 (*current_target.to_prepare_to_store) (regcache)
944 /* Determine current address space of thread PTID. */
946 struct address_space
*target_thread_address_space (ptid_t
);
948 /* Implement the "info proc" command. */
950 void target_info_proc (char *, enum info_proc_what
);
952 /* Returns true if this target can debug multiple processes
955 #define target_supports_multi_process() \
956 (*current_target.to_supports_multi_process) ()
958 /* Returns true if this target can disable address space randomization. */
960 int target_supports_disable_randomization (void);
962 /* Returns true if this target can enable and disable tracepoints
963 while a trace experiment is running. */
965 #define target_supports_enable_disable_tracepoint() \
966 (*current_target.to_supports_enable_disable_tracepoint) ()
968 #define target_supports_string_tracing() \
969 (*current_target.to_supports_string_tracing) ()
971 /* Invalidate all target dcaches. */
972 extern void target_dcache_invalidate (void);
974 extern int target_read_string (CORE_ADDR
, char **, int, int *);
976 extern int target_read_memory (CORE_ADDR memaddr
, gdb_byte
*myaddr
, int len
);
978 extern int target_read_stack (CORE_ADDR memaddr
, gdb_byte
*myaddr
, int len
);
980 extern int target_write_memory (CORE_ADDR memaddr
, const gdb_byte
*myaddr
,
983 extern int target_write_raw_memory (CORE_ADDR memaddr
, const gdb_byte
*myaddr
,
986 /* Fetches the target's memory map. If one is found it is sorted
987 and returned, after some consistency checking. Otherwise, NULL
989 VEC(mem_region_s
) *target_memory_map (void);
991 /* Erase the specified flash region. */
992 void target_flash_erase (ULONGEST address
, LONGEST length
);
994 /* Finish a sequence of flash operations. */
995 void target_flash_done (void);
997 /* Describes a request for a memory write operation. */
998 struct memory_write_request
1000 /* Begining address that must be written. */
1002 /* Past-the-end address. */
1004 /* The data to write. */
1006 /* A callback baton for progress reporting for this request. */
1009 typedef struct memory_write_request memory_write_request_s
;
1010 DEF_VEC_O(memory_write_request_s
);
1012 /* Enumeration specifying different flash preservation behaviour. */
1013 enum flash_preserve_mode
1019 /* Write several memory blocks at once. This version can be more
1020 efficient than making several calls to target_write_memory, in
1021 particular because it can optimize accesses to flash memory.
1023 Moreover, this is currently the only memory access function in gdb
1024 that supports writing to flash memory, and it should be used for
1025 all cases where access to flash memory is desirable.
1027 REQUESTS is the vector (see vec.h) of memory_write_request.
1028 PRESERVE_FLASH_P indicates what to do with blocks which must be
1029 erased, but not completely rewritten.
1030 PROGRESS_CB is a function that will be periodically called to provide
1031 feedback to user. It will be called with the baton corresponding
1032 to the request currently being written. It may also be called
1033 with a NULL baton, when preserved flash sectors are being rewritten.
1035 The function returns 0 on success, and error otherwise. */
1036 int target_write_memory_blocks (VEC(memory_write_request_s
) *requests
,
1037 enum flash_preserve_mode preserve_flash_p
,
1038 void (*progress_cb
) (ULONGEST
, void *));
1040 /* From infrun.c. */
1042 extern int inferior_has_forked (ptid_t pid
, ptid_t
*child_pid
);
1044 extern int inferior_has_vforked (ptid_t pid
, ptid_t
*child_pid
);
1046 extern int inferior_has_execd (ptid_t pid
, char **execd_pathname
);
1048 extern int inferior_has_called_syscall (ptid_t pid
, int *syscall_number
);
1050 /* Print a line about the current target. */
1052 #define target_files_info() \
1053 (*current_target.to_files_info) (¤t_target)
1055 /* Insert a breakpoint at address BP_TGT->placed_address in the target
1056 machine. Result is 0 for success, or an errno value. */
1058 extern int target_insert_breakpoint (struct gdbarch
*gdbarch
,
1059 struct bp_target_info
*bp_tgt
);
1061 /* Remove a breakpoint at address BP_TGT->placed_address in the target
1062 machine. Result is 0 for success, or an errno value. */
1064 extern int target_remove_breakpoint (struct gdbarch
*gdbarch
,
1065 struct bp_target_info
*bp_tgt
);
1067 /* Initialize the terminal settings we record for the inferior,
1068 before we actually run the inferior. */
1070 #define target_terminal_init() \
1071 (*current_target.to_terminal_init) ()
1073 /* Put the inferior's terminal settings into effect.
1074 This is preparation for starting or resuming the inferior. */
1076 extern void target_terminal_inferior (void);
1078 /* Put some of our terminal settings into effect,
1079 enough to get proper results from our output,
1080 but do not change into or out of RAW mode
1081 so that no input is discarded.
1083 After doing this, either terminal_ours or terminal_inferior
1084 should be called to get back to a normal state of affairs. */
1086 #define target_terminal_ours_for_output() \
1087 (*current_target.to_terminal_ours_for_output) ()
1089 /* Put our terminal settings into effect.
1090 First record the inferior's terminal settings
1091 so they can be restored properly later. */
1093 #define target_terminal_ours() \
1094 (*current_target.to_terminal_ours) ()
1096 /* Save our terminal settings.
1097 This is called from TUI after entering or leaving the curses
1098 mode. Since curses modifies our terminal this call is here
1099 to take this change into account. */
1101 #define target_terminal_save_ours() \
1102 (*current_target.to_terminal_save_ours) ()
1104 /* Print useful information about our terminal status, if such a thing
1107 #define target_terminal_info(arg, from_tty) \
1108 (*current_target.to_terminal_info) (arg, from_tty)
1110 /* Kill the inferior process. Make it go away. */
1112 extern void target_kill (void);
1114 /* Load an executable file into the target process. This is expected
1115 to not only bring new code into the target process, but also to
1116 update GDB's symbol tables to match.
1118 ARG contains command-line arguments, to be broken down with
1119 buildargv (). The first non-switch argument is the filename to
1120 load, FILE; the second is a number (as parsed by strtoul (..., ...,
1121 0)), which is an offset to apply to the load addresses of FILE's
1122 sections. The target may define switches, or other non-switch
1123 arguments, as it pleases. */
1125 extern void target_load (char *arg
, int from_tty
);
1127 /* Start an inferior process and set inferior_ptid to its pid.
1128 EXEC_FILE is the file to run.
1129 ALLARGS is a string containing the arguments to the program.
1130 ENV is the environment vector to pass. Errors reported with error().
1131 On VxWorks and various standalone systems, we ignore exec_file. */
1133 void target_create_inferior (char *exec_file
, char *args
,
1134 char **env
, int from_tty
);
1136 /* Some targets (such as ttrace-based HPUX) don't allow us to request
1137 notification of inferior events such as fork and vork immediately
1138 after the inferior is created. (This because of how gdb gets an
1139 inferior created via invoking a shell to do it. In such a scenario,
1140 if the shell init file has commands in it, the shell will fork and
1141 exec for each of those commands, and we will see each such fork
1144 Such targets will supply an appropriate definition for this function. */
1146 #define target_post_startup_inferior(ptid) \
1147 (*current_target.to_post_startup_inferior) (ptid)
1149 /* On some targets, we can catch an inferior fork or vfork event when
1150 it occurs. These functions insert/remove an already-created
1151 catchpoint for such events. They return 0 for success, 1 if the
1152 catchpoint type is not supported and -1 for failure. */
1154 #define target_insert_fork_catchpoint(pid) \
1155 (*current_target.to_insert_fork_catchpoint) (pid)
1157 #define target_remove_fork_catchpoint(pid) \
1158 (*current_target.to_remove_fork_catchpoint) (pid)
1160 #define target_insert_vfork_catchpoint(pid) \
1161 (*current_target.to_insert_vfork_catchpoint) (pid)
1163 #define target_remove_vfork_catchpoint(pid) \
1164 (*current_target.to_remove_vfork_catchpoint) (pid)
1166 /* If the inferior forks or vforks, this function will be called at
1167 the next resume in order to perform any bookkeeping and fiddling
1168 necessary to continue debugging either the parent or child, as
1169 requested, and releasing the other. Information about the fork
1170 or vfork event is available via get_last_target_status ().
1171 This function returns 1 if the inferior should not be resumed
1172 (i.e. there is another event pending). */
1174 int target_follow_fork (int follow_child
);
1176 /* On some targets, we can catch an inferior exec event when it
1177 occurs. These functions insert/remove an already-created
1178 catchpoint for such events. They return 0 for success, 1 if the
1179 catchpoint type is not supported and -1 for failure. */
1181 #define target_insert_exec_catchpoint(pid) \
1182 (*current_target.to_insert_exec_catchpoint) (pid)
1184 #define target_remove_exec_catchpoint(pid) \
1185 (*current_target.to_remove_exec_catchpoint) (pid)
1189 NEEDED is nonzero if any syscall catch (of any kind) is requested.
1190 If NEEDED is zero, it means the target can disable the mechanism to
1191 catch system calls because there are no more catchpoints of this type.
1193 ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
1194 being requested. In this case, both TABLE_SIZE and TABLE should
1197 TABLE_SIZE is the number of elements in TABLE. It only matters if
1200 TABLE is an array of ints, indexed by syscall number. An element in
1201 this array is nonzero if that syscall should be caught. This argument
1202 only matters if ANY_COUNT is zero.
1204 Return 0 for success, 1 if syscall catchpoints are not supported or -1
1207 #define target_set_syscall_catchpoint(pid, needed, any_count, table_size, table) \
1208 (*current_target.to_set_syscall_catchpoint) (pid, needed, any_count, \
1211 /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the
1212 exit code of PID, if any. */
1214 #define target_has_exited(pid,wait_status,exit_status) \
1215 (*current_target.to_has_exited) (pid,wait_status,exit_status)
1217 /* The debugger has completed a blocking wait() call. There is now
1218 some process event that must be processed. This function should
1219 be defined by those targets that require the debugger to perform
1220 cleanup or internal state changes in response to the process event. */
1222 /* The inferior process has died. Do what is right. */
1224 void target_mourn_inferior (void);
1226 /* Does target have enough data to do a run or attach command? */
1228 #define target_can_run(t) \
1229 ((t)->to_can_run) ()
1231 /* Set list of signals to be handled in the target.
1233 PASS_SIGNALS is an array of size NSIG, indexed by target signal number
1234 (enum target_signal). For every signal whose entry in this array is
1235 non-zero, the target is allowed -but not required- to skip reporting
1236 arrival of the signal to the GDB core by returning from target_wait,
1237 and to pass the signal directly to the inferior instead.
1239 However, if the target is hardware single-stepping a thread that is
1240 about to receive a signal, it needs to be reported in any case, even
1241 if mentioned in a previous target_pass_signals call. */
1243 extern void target_pass_signals (int nsig
, unsigned char *pass_signals
);
1245 /* Check to see if a thread is still alive. */
1247 extern int target_thread_alive (ptid_t ptid
);
1249 /* Query for new threads and add them to the thread list. */
1251 extern void target_find_new_threads (void);
1253 /* Make target stop in a continuable fashion. (For instance, under
1254 Unix, this should act like SIGSTOP). This function is normally
1255 used by GUIs to implement a stop button. */
1257 extern void target_stop (ptid_t ptid
);
1259 /* Send the specified COMMAND to the target's monitor
1260 (shell,interpreter) for execution. The result of the query is
1261 placed in OUTBUF. */
1263 #define target_rcmd(command, outbuf) \
1264 (*current_target.to_rcmd) (command, outbuf)
1267 /* Does the target include all of memory, or only part of it? This
1268 determines whether we look up the target chain for other parts of
1269 memory if this target can't satisfy a request. */
1271 extern int target_has_all_memory_1 (void);
1272 #define target_has_all_memory target_has_all_memory_1 ()
1274 /* Does the target include memory? (Dummy targets don't.) */
1276 extern int target_has_memory_1 (void);
1277 #define target_has_memory target_has_memory_1 ()
1279 /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
1280 we start a process.) */
1282 extern int target_has_stack_1 (void);
1283 #define target_has_stack target_has_stack_1 ()
1285 /* Does the target have registers? (Exec files don't.) */
1287 extern int target_has_registers_1 (void);
1288 #define target_has_registers target_has_registers_1 ()
1290 /* Does the target have execution? Can we make it jump (through
1291 hoops), or pop its stack a few times? This means that the current
1292 target is currently executing; for some targets, that's the same as
1293 whether or not the target is capable of execution, but there are
1294 also targets which can be current while not executing. In that
1295 case this will become true after target_create_inferior or
1298 extern int target_has_execution_1 (ptid_t
);
1300 /* Like target_has_execution_1, but always passes inferior_ptid. */
1302 extern int target_has_execution_current (void);
1304 #define target_has_execution target_has_execution_current ()
1306 /* Default implementations for process_stratum targets. Return true
1307 if there's a selected inferior, false otherwise. */
1309 extern int default_child_has_all_memory (struct target_ops
*ops
);
1310 extern int default_child_has_memory (struct target_ops
*ops
);
1311 extern int default_child_has_stack (struct target_ops
*ops
);
1312 extern int default_child_has_registers (struct target_ops
*ops
);
1313 extern int default_child_has_execution (struct target_ops
*ops
,
1316 /* Can the target support the debugger control of thread execution?
1317 Can it lock the thread scheduler? */
1319 #define target_can_lock_scheduler \
1320 (current_target.to_has_thread_control & tc_schedlock)
1322 /* Should the target enable async mode if it is supported? Temporary
1323 cludge until async mode is a strict superset of sync mode. */
1324 extern int target_async_permitted
;
1326 /* Can the target support asynchronous execution? */
1327 #define target_can_async_p() (current_target.to_can_async_p ())
1329 /* Is the target in asynchronous execution mode? */
1330 #define target_is_async_p() (current_target.to_is_async_p ())
1332 int target_supports_non_stop (void);
1334 /* Put the target in async mode with the specified callback function. */
1335 #define target_async(CALLBACK,CONTEXT) \
1336 (current_target.to_async ((CALLBACK), (CONTEXT)))
1338 #define target_execution_direction() \
1339 (current_target.to_execution_direction ())
1341 /* Converts a process id to a string. Usually, the string just contains
1342 `process xyz', but on some systems it may contain
1343 `process xyz thread abc'. */
1345 extern char *target_pid_to_str (ptid_t ptid
);
1347 extern char *normal_pid_to_str (ptid_t ptid
);
1349 /* Return a short string describing extra information about PID,
1350 e.g. "sleeping", "runnable", "running on LWP 3". Null return value
1353 #define target_extra_thread_info(TP) \
1354 (current_target.to_extra_thread_info (TP))
1356 /* Return the thread's name. A NULL result means that the target
1357 could not determine this thread's name. */
1359 extern char *target_thread_name (struct thread_info
*);
1361 /* Attempts to find the pathname of the executable file
1362 that was run to create a specified process.
1364 The process PID must be stopped when this operation is used.
1366 If the executable file cannot be determined, NULL is returned.
1368 Else, a pointer to a character string containing the pathname
1369 is returned. This string should be copied into a buffer by
1370 the client if the string will not be immediately used, or if
1373 #define target_pid_to_exec_file(pid) \
1374 (current_target.to_pid_to_exec_file) (pid)
1376 /* See the to_thread_architecture description in struct target_ops. */
1378 #define target_thread_architecture(ptid) \
1379 (current_target.to_thread_architecture (¤t_target, ptid))
1382 * Iterator function for target memory regions.
1383 * Calls a callback function once for each memory region 'mapped'
1384 * in the child process. Defined as a simple macro rather than
1385 * as a function macro so that it can be tested for nullity.
1388 #define target_find_memory_regions(FUNC, DATA) \
1389 (current_target.to_find_memory_regions) (FUNC, DATA)
1392 * Compose corefile .note section.
1395 #define target_make_corefile_notes(BFD, SIZE_P) \
1396 (current_target.to_make_corefile_notes) (BFD, SIZE_P)
1398 /* Bookmark interfaces. */
1399 #define target_get_bookmark(ARGS, FROM_TTY) \
1400 (current_target.to_get_bookmark) (ARGS, FROM_TTY)
1402 #define target_goto_bookmark(ARG, FROM_TTY) \
1403 (current_target.to_goto_bookmark) (ARG, FROM_TTY)
1405 /* Hardware watchpoint interfaces. */
1407 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1408 write). Only the INFERIOR_PTID task is being queried. */
1410 #define target_stopped_by_watchpoint \
1411 (*current_target.to_stopped_by_watchpoint)
1413 /* Non-zero if we have steppable watchpoints */
1415 #define target_have_steppable_watchpoint \
1416 (current_target.to_have_steppable_watchpoint)
1418 /* Non-zero if we have continuable watchpoints */
1420 #define target_have_continuable_watchpoint \
1421 (current_target.to_have_continuable_watchpoint)
1423 /* Provide defaults for hardware watchpoint functions. */
1425 /* If the *_hw_beakpoint functions have not been defined
1426 elsewhere use the definitions in the target vector. */
1428 /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
1429 one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1430 bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
1431 (including this one?). OTHERTYPE is who knows what... */
1433 #define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
1434 (*current_target.to_can_use_hw_breakpoint) (TYPE, CNT, OTHERTYPE);
1436 /* Returns the number of debug registers needed to watch the given
1437 memory region, or zero if not supported. */
1439 #define target_region_ok_for_hw_watchpoint(addr, len) \
1440 (*current_target.to_region_ok_for_hw_watchpoint) (addr, len)
1443 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
1444 TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
1445 COND is the expression for its condition, or NULL if there's none.
1446 Returns 0 for success, 1 if the watchpoint type is not supported,
1449 #define target_insert_watchpoint(addr, len, type, cond) \
1450 (*current_target.to_insert_watchpoint) (addr, len, type, cond)
1452 #define target_remove_watchpoint(addr, len, type, cond) \
1453 (*current_target.to_remove_watchpoint) (addr, len, type, cond)
1455 /* Insert a new masked watchpoint at ADDR using the mask MASK.
1456 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1457 or hw_access for an access watchpoint. Returns 0 for success, 1 if
1458 masked watchpoints are not supported, -1 for failure. */
1460 extern int target_insert_mask_watchpoint (CORE_ADDR
, CORE_ADDR
, int);
1462 /* Remove a masked watchpoint at ADDR with the mask MASK.
1463 RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1464 or hw_access for an access watchpoint. Returns 0 for success, non-zero
1467 extern int target_remove_mask_watchpoint (CORE_ADDR
, CORE_ADDR
, int);
1469 #define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
1470 (*current_target.to_insert_hw_breakpoint) (gdbarch, bp_tgt)
1472 #define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
1473 (*current_target.to_remove_hw_breakpoint) (gdbarch, bp_tgt)
1475 /* Return number of debug registers needed for a ranged breakpoint,
1476 or -1 if ranged breakpoints are not supported. */
1478 extern int target_ranged_break_num_registers (void);
1480 /* Return non-zero if target knows the data address which triggered this
1481 target_stopped_by_watchpoint, in such case place it to *ADDR_P. Only the
1482 INFERIOR_PTID task is being queried. */
1483 #define target_stopped_data_address(target, addr_p) \
1484 (*target.to_stopped_data_address) (target, addr_p)
1486 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1487 (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1489 /* Return non-zero if the target is capable of using hardware to evaluate
1490 the condition expression. In this case, if the condition is false when
1491 the watched memory location changes, execution may continue without the
1492 debugger being notified.
1494 Due to limitations in the hardware implementation, it may be capable of
1495 avoiding triggering the watchpoint in some cases where the condition
1496 expression is false, but may report some false positives as well.
1497 For this reason, GDB will still evaluate the condition expression when
1498 the watchpoint triggers. */
1499 #define target_can_accel_watchpoint_condition(addr, len, type, cond) \
1500 (*current_target.to_can_accel_watchpoint_condition) (addr, len, type, cond)
1502 /* Return number of debug registers needed for a masked watchpoint,
1503 -1 if masked watchpoints are not supported or -2 if the given address
1504 and mask combination cannot be used. */
1506 extern int target_masked_watch_num_registers (CORE_ADDR addr
, CORE_ADDR mask
);
1508 /* Target can execute in reverse? */
1509 #define target_can_execute_reverse \
1510 (current_target.to_can_execute_reverse ? \
1511 current_target.to_can_execute_reverse () : 0)
1513 extern const struct target_desc
*target_read_description (struct target_ops
*);
1515 #define target_get_ada_task_ptid(lwp, tid) \
1516 (*current_target.to_get_ada_task_ptid) (lwp,tid)
1518 /* Utility implementation of searching memory. */
1519 extern int simple_search_memory (struct target_ops
* ops
,
1520 CORE_ADDR start_addr
,
1521 ULONGEST search_space_len
,
1522 const gdb_byte
*pattern
,
1523 ULONGEST pattern_len
,
1524 CORE_ADDR
*found_addrp
);
1526 /* Main entry point for searching memory. */
1527 extern int target_search_memory (CORE_ADDR start_addr
,
1528 ULONGEST search_space_len
,
1529 const gdb_byte
*pattern
,
1530 ULONGEST pattern_len
,
1531 CORE_ADDR
*found_addrp
);
1533 /* Target file operations. */
1535 /* Open FILENAME on the target, using FLAGS and MODE. Return a
1536 target file descriptor, or -1 if an error occurs (and set
1538 extern int target_fileio_open (const char *filename
, int flags
, int mode
,
1541 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
1542 Return the number of bytes written, or -1 if an error occurs
1543 (and set *TARGET_ERRNO). */
1544 extern int target_fileio_pwrite (int fd
, const gdb_byte
*write_buf
, int len
,
1545 ULONGEST offset
, int *target_errno
);
1547 /* Read up to LEN bytes FD on the target into READ_BUF.
1548 Return the number of bytes read, or -1 if an error occurs
1549 (and set *TARGET_ERRNO). */
1550 extern int target_fileio_pread (int fd
, gdb_byte
*read_buf
, int len
,
1551 ULONGEST offset
, int *target_errno
);
1553 /* Close FD on the target. Return 0, or -1 if an error occurs
1554 (and set *TARGET_ERRNO). */
1555 extern int target_fileio_close (int fd
, int *target_errno
);
1557 /* Unlink FILENAME on the target. Return 0, or -1 if an error
1558 occurs (and set *TARGET_ERRNO). */
1559 extern int target_fileio_unlink (const char *filename
, int *target_errno
);
1561 /* Read value of symbolic link FILENAME on the target. Return a
1562 null-terminated string allocated via xmalloc, or NULL if an error
1563 occurs (and set *TARGET_ERRNO). */
1564 extern char *target_fileio_readlink (const char *filename
, int *target_errno
);
1566 /* Read target file FILENAME. The return value will be -1 if the transfer
1567 fails or is not supported; 0 if the object is empty; or the length
1568 of the object otherwise. If a positive value is returned, a
1569 sufficiently large buffer will be allocated using xmalloc and
1570 returned in *BUF_P containing the contents of the object.
1572 This method should be used for objects sufficiently small to store
1573 in a single xmalloc'd buffer, when no fixed bound on the object's
1574 size is known in advance. */
1575 extern LONGEST
target_fileio_read_alloc (const char *filename
,
1578 /* Read target file FILENAME. The result is NUL-terminated and
1579 returned as a string, allocated using xmalloc. If an error occurs
1580 or the transfer is unsupported, NULL is returned. Empty objects
1581 are returned as allocated but empty strings. A warning is issued
1582 if the result contains any embedded NUL bytes. */
1583 extern char *target_fileio_read_stralloc (const char *filename
);
1586 /* Tracepoint-related operations. */
1588 #define target_trace_init() \
1589 (*current_target.to_trace_init) ()
1591 #define target_download_tracepoint(t) \
1592 (*current_target.to_download_tracepoint) (t)
1594 #define target_can_download_tracepoint() \
1595 (*current_target.to_can_download_tracepoint) ()
1597 #define target_download_trace_state_variable(tsv) \
1598 (*current_target.to_download_trace_state_variable) (tsv)
1600 #define target_enable_tracepoint(loc) \
1601 (*current_target.to_enable_tracepoint) (loc)
1603 #define target_disable_tracepoint(loc) \
1604 (*current_target.to_disable_tracepoint) (loc)
1606 #define target_trace_start() \
1607 (*current_target.to_trace_start) ()
1609 #define target_trace_set_readonly_regions() \
1610 (*current_target.to_trace_set_readonly_regions) ()
1612 #define target_get_trace_status(ts) \
1613 (*current_target.to_get_trace_status) (ts)
1615 #define target_get_tracepoint_status(tp,utp) \
1616 (*current_target.to_get_tracepoint_status) (tp, utp)
1618 #define target_trace_stop() \
1619 (*current_target.to_trace_stop) ()
1621 #define target_trace_find(type,num,addr1,addr2,tpp) \
1622 (*current_target.to_trace_find) ((type), (num), (addr1), (addr2), (tpp))
1624 #define target_get_trace_state_variable_value(tsv,val) \
1625 (*current_target.to_get_trace_state_variable_value) ((tsv), (val))
1627 #define target_save_trace_data(filename) \
1628 (*current_target.to_save_trace_data) (filename)
1630 #define target_upload_tracepoints(utpp) \
1631 (*current_target.to_upload_tracepoints) (utpp)
1633 #define target_upload_trace_state_variables(utsvp) \
1634 (*current_target.to_upload_trace_state_variables) (utsvp)
1636 #define target_get_raw_trace_data(buf,offset,len) \
1637 (*current_target.to_get_raw_trace_data) ((buf), (offset), (len))
1639 #define target_get_min_fast_tracepoint_insn_len() \
1640 (*current_target.to_get_min_fast_tracepoint_insn_len) ()
1642 #define target_set_disconnected_tracing(val) \
1643 (*current_target.to_set_disconnected_tracing) (val)
1645 #define target_set_circular_trace_buffer(val) \
1646 (*current_target.to_set_circular_trace_buffer) (val)
1648 #define target_set_trace_notes(user,notes,stopnotes) \
1649 (*current_target.to_set_trace_notes) ((user), (notes), (stopnotes))
1651 #define target_get_tib_address(ptid, addr) \
1652 (*current_target.to_get_tib_address) ((ptid), (addr))
1654 #define target_set_permissions() \
1655 (*current_target.to_set_permissions) ()
1657 #define target_static_tracepoint_marker_at(addr, marker) \
1658 (*current_target.to_static_tracepoint_marker_at) (addr, marker)
1660 #define target_static_tracepoint_markers_by_strid(marker_id) \
1661 (*current_target.to_static_tracepoint_markers_by_strid) (marker_id)
1663 #define target_traceframe_info() \
1664 (*current_target.to_traceframe_info) ()
1666 /* Command logging facility. */
1668 #define target_log_command(p) \
1670 if (current_target.to_log_command) \
1671 (*current_target.to_log_command) (p); \
1675 extern int target_core_of_thread (ptid_t ptid
);
1677 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
1678 the contents of [DATA,DATA+SIZE). Returns 1 if there's a match, 0
1679 if there's a mismatch, and -1 if an error is encountered while
1680 reading memory. Throws an error if the functionality is found not
1681 to be supported by the current target. */
1682 int target_verify_memory (const gdb_byte
*data
,
1683 CORE_ADDR memaddr
, ULONGEST size
);
1685 /* Routines for maintenance of the target structures...
1687 add_target: Add a target to the list of all possible targets.
1689 push_target: Make this target the top of the stack of currently used
1690 targets, within its particular stratum of the stack. Result
1691 is 0 if now atop the stack, nonzero if not on top (maybe
1694 unpush_target: Remove this from the stack of currently used targets,
1695 no matter where it is on the list. Returns 0 if no
1696 change, 1 if removed from stack.
1698 pop_target: Remove the top thing on the stack of current targets. */
1700 extern void add_target (struct target_ops
*);
1702 extern void push_target (struct target_ops
*);
1704 extern int unpush_target (struct target_ops
*);
1706 extern void target_pre_inferior (int);
1708 extern void target_preopen (int);
1710 extern void pop_target (void);
1712 /* Does whatever cleanup is required to get rid of all pushed targets.
1713 QUITTING is propagated to target_close; it indicates that GDB is
1714 exiting and should not get hung on an error (otherwise it is
1715 important to perform clean termination, even if it takes a
1717 extern void pop_all_targets (int quitting
);
1719 /* Like pop_all_targets, but pops only targets whose stratum is
1720 strictly above ABOVE_STRATUM. */
1721 extern void pop_all_targets_above (enum strata above_stratum
, int quitting
);
1723 extern int target_is_pushed (struct target_ops
*t
);
1725 extern CORE_ADDR
target_translate_tls_address (struct objfile
*objfile
,
1728 /* Struct target_section maps address ranges to file sections. It is
1729 mostly used with BFD files, but can be used without (e.g. for handling
1730 raw disks, or files not in formats handled by BFD). */
1732 struct target_section
1734 CORE_ADDR addr
; /* Lowest address in section */
1735 CORE_ADDR endaddr
; /* 1+highest address in section */
1737 struct bfd_section
*the_bfd_section
;
1739 bfd
*bfd
; /* BFD file pointer */
1742 /* Holds an array of target sections. Defined by [SECTIONS..SECTIONS_END[. */
1744 struct target_section_table
1746 struct target_section
*sections
;
1747 struct target_section
*sections_end
;
1750 /* Return the "section" containing the specified address. */
1751 struct target_section
*target_section_by_addr (struct target_ops
*target
,
1754 /* Return the target section table this target (or the targets
1755 beneath) currently manipulate. */
1757 extern struct target_section_table
*target_get_section_table
1758 (struct target_ops
*target
);
1760 /* From mem-break.c */
1762 extern int memory_remove_breakpoint (struct gdbarch
*,
1763 struct bp_target_info
*);
1765 extern int memory_insert_breakpoint (struct gdbarch
*,
1766 struct bp_target_info
*);
1768 extern int default_memory_remove_breakpoint (struct gdbarch
*,
1769 struct bp_target_info
*);
1771 extern int default_memory_insert_breakpoint (struct gdbarch
*,
1772 struct bp_target_info
*);
1777 extern void initialize_targets (void);
1779 extern void noprocess (void) ATTRIBUTE_NORETURN
;
1781 extern void target_require_runnable (void);
1783 extern void find_default_attach (struct target_ops
*, char *, int);
1785 extern void find_default_create_inferior (struct target_ops
*,
1786 char *, char *, char **, int);
1788 extern struct target_ops
*find_run_target (void);
1790 extern struct target_ops
*find_target_beneath (struct target_ops
*);
1792 /* Read OS data object of type TYPE from the target, and return it in
1793 XML format. The result is NUL-terminated and returned as a string,
1794 allocated using xmalloc. If an error occurs or the transfer is
1795 unsupported, NULL is returned. Empty objects are returned as
1796 allocated but empty strings. */
1798 extern char *target_get_osdata (const char *type
);
1801 /* Stuff that should be shared among the various remote targets. */
1803 /* Debugging level. 0 is off, and non-zero values mean to print some debug
1804 information (higher values, more information). */
1805 extern int remote_debug
;
1807 /* Speed in bits per second, or -1 which means don't mess with the speed. */
1808 extern int baud_rate
;
1809 /* Timeout limit for response from target. */
1810 extern int remote_timeout
;
1813 /* Functions for helping to write a native target. */
1815 /* This is for native targets which use a unix/POSIX-style waitstatus. */
1816 extern void store_waitstatus (struct target_waitstatus
*, int);
1818 /* These are in common/signals.c, but they're only used by gdb. */
1819 extern enum target_signal
default_target_signal_from_host (struct gdbarch
*,
1821 extern int default_target_signal_to_host (struct gdbarch
*,
1822 enum target_signal
);
1824 /* Convert from a number used in a GDB command to an enum target_signal. */
1825 extern enum target_signal
target_signal_from_command (int);
1826 /* End of files in common/signals.c. */
1828 /* Set the show memory breakpoints mode to show, and installs a cleanup
1829 to restore it back to the current value. */
1830 extern struct cleanup
*make_show_memory_breakpoints_cleanup (int show
);
1832 extern int may_write_registers
;
1833 extern int may_write_memory
;
1834 extern int may_insert_breakpoints
;
1835 extern int may_insert_tracepoints
;
1836 extern int may_insert_fast_tracepoints
;
1837 extern int may_stop
;
1839 extern void update_target_permissions (void);
1842 /* Imported from machine dependent code. */
1844 /* Blank target vector entries are initialized to target_ignore. */
1845 void target_ignore (void);
1847 #endif /* !defined (TARGET_H) */