gdb/target.h

   1 /* Interface between GDB and target environments, including files and processes
   2
   3    Copyright (C) 1990-2012 Free Software Foundation, Inc.
   4
   5    Contributed by Cygnus Support.  Written by John Gilmore.
   6
   7    This file is part of GDB.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  21
  22 #if !defined (TARGET_H)
  23 #define TARGET_H
  24
  25 struct objfile;
  26 struct ui_file;
  27 struct mem_attrib;
  28 struct target_ops;
  29 struct bp_location;
  30 struct bp_target_info;
  31 struct regcache;
  32 struct target_section_table;
  33 struct trace_state_variable;
  34 struct trace_status;
  35 struct uploaded_tsv;
  36 struct uploaded_tp;
  37 struct static_tracepoint_marker;
  38 struct traceframe_info;
  39 struct expression;
  40
  41 /* This include file defines the interface between the main part
  42    of the debugger, and the part which is target-specific, or
  43    specific to the communications interface between us and the
  44    target.
  45
  46    A TARGET is an interface between the debugger and a particular
  47    kind of file or process.  Targets can be STACKED in STRATA,
  48    so that more than one target can potentially respond to a request.
  49    In particular, memory accesses will walk down the stack of targets
  50    until they find a target that is interested in handling that particular
  51    address.  STRATA are artificial boundaries on the stack, within
  52    which particular kinds of targets live.  Strata exist so that
  53    people don't get confused by pushing e.g. a process target and then
  54    a file target, and wondering why they can't see the current values
  55    of variables any more (the file target is handling them and they
  56    never get to the process target).  So when you push a file target,
  57    it goes into the file stratum, which is always below the process
  58    stratum.  */
  59
  60 #include "bfd.h"
  61 #include "symtab.h"
  62 #include "memattr.h"
  63 #include "vec.h"
  64 #include "gdb_signals.h"
  65
  66 enum strata
  67   {
  68     dummy_stratum,              /* The lowest of the low */
  69     file_stratum,               /* Executable files, etc */
  70     process_stratum,            /* Executing processes or core dump files */
  71     thread_stratum,             /* Executing threads */
  72     record_stratum,             /* Support record debugging */
  73     arch_stratum                /* Architecture overrides */
  74   };
  75
  76 enum thread_control_capabilities
  77   {
  78     tc_none = 0,                /* Default: can't control thread execution.  */
  79     tc_schedlock = 1,           /* Can lock the thread scheduler.  */
  80   };
  81
  82 /* Stuff for target_wait.  */
  83
  84 /* Generally, what has the program done?  */
  85 enum target_waitkind
  86   {
  87     /* The program has exited.  The exit status is in value.integer.  */
  88     TARGET_WAITKIND_EXITED,
  89
  90     /* The program has stopped with a signal.  Which signal is in
  91        value.sig.  */
  92     TARGET_WAITKIND_STOPPED,
  93
  94     /* The program has terminated with a signal.  Which signal is in
  95        value.sig.  */
  96     TARGET_WAITKIND_SIGNALLED,
  97
  98     /* The program is letting us know that it dynamically loaded something
  99        (e.g. it called load(2) on AIX).  */
 100     TARGET_WAITKIND_LOADED,
 101
 102     /* The program has forked.  A "related" process' PTID is in
 103        value.related_pid.  I.e., if the child forks, value.related_pid
 104        is the parent's ID.  */
 105
 106     TARGET_WAITKIND_FORKED,
 107
 108     /* The program has vforked.  A "related" process's PTID is in
 109        value.related_pid.  */
 110
 111     TARGET_WAITKIND_VFORKED,
 112
 113     /* The program has exec'ed a new executable file.  The new file's
 114        pathname is pointed to by value.execd_pathname.  */
 115
 116     TARGET_WAITKIND_EXECD,
 117
 118     /* The program had previously vforked, and now the child is done
 119        with the shared memory region, because it exec'ed or exited.
 120        Note that the event is reported to the vfork parent.  This is
 121        only used if GDB did not stay attached to the vfork child,
 122        otherwise, a TARGET_WAITKIND_EXECD or
 123        TARGET_WAITKIND_EXIT|SIGNALLED event associated with the child
 124        has the same effect.  */
 125     TARGET_WAITKIND_VFORK_DONE,
 126
 127     /* The program has entered or returned from a system call.  On
 128        HP-UX, this is used in the hardware watchpoint implementation.
 129        The syscall's unique integer ID number is in value.syscall_id.  */
 130
 131     TARGET_WAITKIND_SYSCALL_ENTRY,
 132     TARGET_WAITKIND_SYSCALL_RETURN,
 133
 134     /* Nothing happened, but we stopped anyway.  This perhaps should be handled
 135        within target_wait, but I'm not sure target_wait should be resuming the
 136        inferior.  */
 137     TARGET_WAITKIND_SPURIOUS,
 138
 139     /* An event has occured, but we should wait again.
 140        Remote_async_wait() returns this when there is an event
 141        on the inferior, but the rest of the world is not interested in
 142        it.  The inferior has not stopped, but has just sent some output
 143        to the console, for instance.  In this case, we want to go back
 144        to the event loop and wait there for another event from the
 145        inferior, rather than being stuck in the remote_async_wait()
 146        function. sThis way the event loop is responsive to other events,
 147        like for instance the user typing.  */
 148     TARGET_WAITKIND_IGNORE,
 149
 150     /* The target has run out of history information,
 151        and cannot run backward any further.  */
 152     TARGET_WAITKIND_NO_HISTORY,
 153
 154     /* There are no resumed children left in the program.  */
 155     TARGET_WAITKIND_NO_RESUMED
 156   };
 157
 158 struct target_waitstatus
 159   {
 160     enum target_waitkind kind;
 161
 162     /* Forked child pid, execd pathname, exit status, signal number or
 163        syscall number.  */
 164     union
 165       {
 166         int integer;
 167         enum target_signal sig;
 168         ptid_t related_pid;
 169         char *execd_pathname;
 170         int syscall_number;
 171       }
 172     value;
 173   };
 174
 175 /* Options that can be passed to target_wait.  */
 176
 177 /* Return immediately if there's no event already queued.  If this
 178    options is not requested, target_wait blocks waiting for an
 179    event.  */
 180 #define TARGET_WNOHANG 1
 181
 182 /* The structure below stores information about a system call.
 183    It is basically used in the "catch syscall" command, and in
 184    every function that gives information about a system call.
 185
 186    It's also good to mention that its fields represent everything
 187    that we currently know about a syscall in GDB.  */
 188 struct syscall
 189   {
 190     /* The syscall number.  */
 191     int number;
 192
 193     /* The syscall name.  */
 194     const char *name;
 195   };
 196
 197 /* Return a pretty printed form of target_waitstatus.
 198    Space for the result is malloc'd, caller must free.  */
 199 extern char *target_waitstatus_to_string (const struct target_waitstatus *);
 200
 201 /* Possible types of events that the inferior handler will have to
 202    deal with.  */
 203 enum inferior_event_type
 204   {
 205     /* Process a normal inferior event which will result in target_wait
 206        being called.  */
 207     INF_REG_EVENT,
 208     /* We are called because a timer went off.  */
 209     INF_TIMER,
 210     /* We are called to do stuff after the inferior stops.  */
 211     INF_EXEC_COMPLETE,
 212     /* We are called to do some stuff after the inferior stops, but we
 213        are expected to reenter the proceed() and
 214        handle_inferior_event() functions.  This is used only in case of
 215        'step n' like commands.  */
 216     INF_EXEC_CONTINUE
 217   };
 218 \f
 219 /* Target objects which can be transfered using target_read,
 220    target_write, et cetera.  */
 221
 222 enum target_object
 223 {
 224   /* AVR target specific transfer.  See "avr-tdep.c" and "remote.c".  */
 225   TARGET_OBJECT_AVR,
 226   /* SPU target specific transfer.  See "spu-tdep.c".  */
 227   TARGET_OBJECT_SPU,
 228   /* Transfer up-to LEN bytes of memory starting at OFFSET.  */
 229   TARGET_OBJECT_MEMORY,
 230   /* Memory, avoiding GDB's data cache and trusting the executable.
 231      Target implementations of to_xfer_partial never need to handle
 232      this object, and most callers should not use it.  */
 233   TARGET_OBJECT_RAW_MEMORY,
 234   /* Memory known to be part of the target's stack.  This is cached even
 235      if it is not in a region marked as such, since it is known to be
 236      "normal" RAM.  */
 237   TARGET_OBJECT_STACK_MEMORY,
 238   /* Kernel Unwind Table.  See "ia64-tdep.c".  */
 239   TARGET_OBJECT_UNWIND_TABLE,
 240   /* Transfer auxilliary vector.  */
 241   TARGET_OBJECT_AUXV,
 242   /* StackGhost cookie.  See "sparc-tdep.c".  */
 243   TARGET_OBJECT_WCOOKIE,
 244   /* Target memory map in XML format.  */
 245   TARGET_OBJECT_MEMORY_MAP,
 246   /* Flash memory.  This object can be used to write contents to
 247      a previously erased flash memory.  Using it without erasing
 248      flash can have unexpected results.  Addresses are physical
 249      address on target, and not relative to flash start.  */
 250   TARGET_OBJECT_FLASH,
 251   /* Available target-specific features, e.g. registers and coprocessors.
 252      See "target-descriptions.c".  ANNEX should never be empty.  */
 253   TARGET_OBJECT_AVAILABLE_FEATURES,
 254   /* Currently loaded libraries, in XML format.  */
 255   TARGET_OBJECT_LIBRARIES,
 256   /* Currently loaded libraries specific for SVR4 systems, in XML format.  */
 257   TARGET_OBJECT_LIBRARIES_SVR4,
 258   /* Get OS specific data.  The ANNEX specifies the type (running
 259      processes, etc.).  The data being transfered is expected to follow
 260      the DTD specified in features/osdata.dtd.  */
 261   TARGET_OBJECT_OSDATA,
 262   /* Extra signal info.  Usually the contents of `siginfo_t' on unix
 263      platforms.  */
 264   TARGET_OBJECT_SIGNAL_INFO,
 265   /* The list of threads that are being debugged.  */
 266   TARGET_OBJECT_THREADS,
 267   /* Collected static trace data.  */
 268   TARGET_OBJECT_STATIC_TRACE_DATA,
 269   /* The HP-UX registers (those that can be obtained or modified by using
 270      the TT_LWP_RUREGS/TT_LWP_WUREGS ttrace requests).  */
 271   TARGET_OBJECT_HPUX_UREGS,
 272   /* The HP-UX shared library linkage pointer.  ANNEX should be a string
 273      image of the code address whose linkage pointer we are looking for.
 274
 275      The size of the data transfered is always 8 bytes (the size of an
 276      address on ia64).  */
 277   TARGET_OBJECT_HPUX_SOLIB_GOT,
 278   /* Traceframe info, in XML format.  */
 279   TARGET_OBJECT_TRACEFRAME_INFO,
 280   /* Load maps for FDPIC systems.  */
 281   TARGET_OBJECT_FDPIC,
 282   /* Darwin dynamic linker info data.  */
 283   TARGET_OBJECT_DARWIN_DYLD_INFO
 284   /* Possible future objects: TARGET_OBJECT_FILE, ...  */
 285 };
 286
 287 /* Enumeration of the kinds of traceframe searches that a target may
 288    be able to perform.  */
 289
 290 enum trace_find_type
 291   {
 292     tfind_number,
 293     tfind_pc,
 294     tfind_tp,
 295     tfind_range,
 296     tfind_outside,
 297   };
 298
 299 typedef struct static_tracepoint_marker *static_tracepoint_marker_p;
 300 DEF_VEC_P(static_tracepoint_marker_p);
 301
 302 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 303    OBJECT.  The OFFSET, for a seekable object, specifies the
 304    starting point.  The ANNEX can be used to provide additional
 305    data-specific information to the target.
 306
 307    Return the number of bytes actually transfered, or -1 if the
 308    transfer is not supported or otherwise fails.  Return of a positive
 309    value less than LEN indicates that no further transfer is possible.
 310    Unlike the raw to_xfer_partial interface, callers of these
 311    functions do not need to retry partial transfers.  */
 312
 313 extern LONGEST target_read (struct target_ops *ops,
 314                             enum target_object object,
 315                             const char *annex, gdb_byte *buf,
 316                             ULONGEST offset, LONGEST len);
 317
 318 struct memory_read_result
 319   {
 320     /* First address that was read.  */
 321     ULONGEST begin;
 322     /* Past-the-end address.  */
 323     ULONGEST end;
 324     /* The data.  */
 325     gdb_byte *data;
 326 };
 327 typedef struct memory_read_result memory_read_result_s;
 328 DEF_VEC_O(memory_read_result_s);
 329
 330 extern void free_memory_read_result_vector (void *);
 331
 332 extern VEC(memory_read_result_s)* read_memory_robust (struct target_ops *ops,
 333                                                       ULONGEST offset,
 334                                                       LONGEST len);
 335
 336 extern LONGEST target_write (struct target_ops *ops,
 337                              enum target_object object,
 338                              const char *annex, const gdb_byte *buf,
 339                              ULONGEST offset, LONGEST len);
 340
 341 /* Similar to target_write, except that it also calls PROGRESS with
 342    the number of bytes written and the opaque BATON after every
 343    successful partial write (and before the first write).  This is
 344    useful for progress reporting and user interaction while writing
 345    data.  To abort the transfer, the progress callback can throw an
 346    exception.  */
 347
 348 LONGEST target_write_with_progress (struct target_ops *ops,
 349                                     enum target_object object,
 350                                     const char *annex, const gdb_byte *buf,
 351                                     ULONGEST offset, LONGEST len,
 352                                     void (*progress) (ULONGEST, void *),
 353                                     void *baton);
 354
 355 /* Wrapper to perform a full read of unknown size.  OBJECT/ANNEX will
 356    be read using OPS.  The return value will be -1 if the transfer
 357    fails or is not supported; 0 if the object is empty; or the length
 358    of the object otherwise.  If a positive value is returned, a
 359    sufficiently large buffer will be allocated using xmalloc and
 360    returned in *BUF_P containing the contents of the object.
 361
 362    This method should be used for objects sufficiently small to store
 363    in a single xmalloc'd buffer, when no fixed bound on the object's
 364    size is known in advance.  Don't try to read TARGET_OBJECT_MEMORY
 365    through this function.  */
 366
 367 extern LONGEST target_read_alloc (struct target_ops *ops,
 368                                   enum target_object object,
 369                                   const char *annex, gdb_byte **buf_p);
 370
 371 /* Read OBJECT/ANNEX using OPS.  The result is NUL-terminated and
 372    returned as a string, allocated using xmalloc.  If an error occurs
 373    or the transfer is unsupported, NULL is returned.  Empty objects
 374    are returned as allocated but empty strings.  A warning is issued
 375    if the result contains any embedded NUL bytes.  */
 376
 377 extern char *target_read_stralloc (struct target_ops *ops,
 378                                    enum target_object object,
 379                                    const char *annex);
 380
 381 /* Wrappers to target read/write that perform memory transfers.  They
 382    throw an error if the memory transfer fails.
 383
 384    NOTE: cagney/2003-10-23: The naming schema is lifted from
 385    "frame.h".  The parameter order is lifted from get_frame_memory,
 386    which in turn lifted it from read_memory.  */
 387
 388 extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
 389                                gdb_byte *buf, LONGEST len);
 390 extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
 391                                             CORE_ADDR addr, int len,
 392                                             enum bfd_endian byte_order);
 393 \f
 394 struct thread_info;             /* fwd decl for parameter list below: */
 395
 396 struct target_ops
 397   {
 398     struct target_ops *beneath; /* To the target under this one.  */
 399     char *to_shortname;         /* Name this target type */
 400     char *to_longname;          /* Name for printing */
 401     char *to_doc;               /* Documentation.  Does not include trailing
 402                                    newline, and starts with a one-line descrip-
 403                                    tion (probably similar to to_longname).  */
 404     /* Per-target scratch pad.  */
 405     void *to_data;
 406     /* The open routine takes the rest of the parameters from the
 407        command, and (if successful) pushes a new target onto the
 408        stack.  Targets should supply this routine, if only to provide
 409        an error message.  */
 410     void (*to_open) (char *, int);
 411     /* Old targets with a static target vector provide "to_close".
 412        New re-entrant targets provide "to_xclose" and that is expected
 413        to xfree everything (including the "struct target_ops").  */
 414     void (*to_xclose) (struct target_ops *targ, int quitting);
 415     void (*to_close) (int);
 416     void (*to_attach) (struct target_ops *ops, char *, int);
 417     void (*to_post_attach) (int);
 418     void (*to_detach) (struct target_ops *ops, char *, int);
 419     void (*to_disconnect) (struct target_ops *, char *, int);
 420     void (*to_resume) (struct target_ops *, ptid_t, int, enum target_signal);
 421     ptid_t (*to_wait) (struct target_ops *,
 422                        ptid_t, struct target_waitstatus *, int);
 423     void (*to_fetch_registers) (struct target_ops *, struct regcache *, int);
 424     void (*to_store_registers) (struct target_ops *, struct regcache *, int);
 425     void (*to_prepare_to_store) (struct regcache *);
 426
 427     /* Transfer LEN bytes of memory between GDB address MYADDR and
 428        target address MEMADDR.  If WRITE, transfer them to the target, else
 429        transfer them from the target.  TARGET is the target from which we
 430        get this function.
 431
 432        Return value, N, is one of the following:
 433
 434        0 means that we can't handle this.  If errno has been set, it is the
 435        error which prevented us from doing it (FIXME: What about bfd_error?).
 436
 437        positive (call it N) means that we have transferred N bytes
 438        starting at MEMADDR.  We might be able to handle more bytes
 439        beyond this length, but no promises.
 440
 441        negative (call its absolute value N) means that we cannot
 442        transfer right at MEMADDR, but we could transfer at least
 443        something at MEMADDR + N.
 444
 445        NOTE: cagney/2004-10-01: This has been entirely superseeded by
 446        to_xfer_partial and inferior inheritance.  */
 447
 448     int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr,
 449                                    int len, int write,
 450                                    struct mem_attrib *attrib,
 451                                    struct target_ops *target);
 452
 453     void (*to_files_info) (struct target_ops *);
 454     int (*to_insert_breakpoint) (struct gdbarch *, struct bp_target_info *);
 455     int (*to_remove_breakpoint) (struct gdbarch *, struct bp_target_info *);
 456     int (*to_can_use_hw_breakpoint) (int, int, int);
 457     int (*to_ranged_break_num_registers) (struct target_ops *);
 458     int (*to_insert_hw_breakpoint) (struct gdbarch *, struct bp_target_info *);
 459     int (*to_remove_hw_breakpoint) (struct gdbarch *, struct bp_target_info *);
 460
 461     /* Documentation of what the two routines below are expected to do is
 462        provided with the corresponding target_* macros.  */
 463     int (*to_remove_watchpoint) (CORE_ADDR, int, int, struct expression *);
 464     int (*to_insert_watchpoint) (CORE_ADDR, int, int, struct expression *);
 465
 466     int (*to_insert_mask_watchpoint) (struct target_ops *,
 467                                       CORE_ADDR, CORE_ADDR, int);
 468     int (*to_remove_mask_watchpoint) (struct target_ops *,
 469                                       CORE_ADDR, CORE_ADDR, int);
 470     int (*to_stopped_by_watchpoint) (void);
 471     int to_have_steppable_watchpoint;
 472     int to_have_continuable_watchpoint;
 473     int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
 474     int (*to_watchpoint_addr_within_range) (struct target_ops *,
 475                                             CORE_ADDR, CORE_ADDR, int);
 476
 477     /* Documentation of this routine is provided with the corresponding
 478        target_* macro.  */
 479     int (*to_region_ok_for_hw_watchpoint) (CORE_ADDR, int);
 480
 481     int (*to_can_accel_watchpoint_condition) (CORE_ADDR, int, int,
 482                                               struct expression *);
 483     int (*to_masked_watch_num_registers) (struct target_ops *,
 484                                           CORE_ADDR, CORE_ADDR);
 485     void (*to_terminal_init) (void);
 486     void (*to_terminal_inferior) (void);
 487     void (*to_terminal_ours_for_output) (void);
 488     void (*to_terminal_ours) (void);
 489     void (*to_terminal_save_ours) (void);
 490     void (*to_terminal_info) (char *, int);
 491     void (*to_kill) (struct target_ops *);
 492     void (*to_load) (char *, int);
 493     void (*to_create_inferior) (struct target_ops *,
 494                                 char *, char *, char **, int);
 495     void (*to_post_startup_inferior) (ptid_t);
 496     int (*to_insert_fork_catchpoint) (int);
 497     int (*to_remove_fork_catchpoint) (int);
 498     int (*to_insert_vfork_catchpoint) (int);
 499     int (*to_remove_vfork_catchpoint) (int);
 500     int (*to_follow_fork) (struct target_ops *, int);
 501     int (*to_insert_exec_catchpoint) (int);
 502     int (*to_remove_exec_catchpoint) (int);
 503     int (*to_set_syscall_catchpoint) (int, int, int, int, int *);
 504     int (*to_has_exited) (int, int, int *);
 505     void (*to_mourn_inferior) (struct target_ops *);
 506     int (*to_can_run) (void);
 507
 508     /* Documentation of this routine is provided with the corresponding
 509        target_* macro.  */
 510     void (*to_pass_signals) (int, unsigned char *);
 511
 512     int (*to_thread_alive) (struct target_ops *, ptid_t ptid);
 513     void (*to_find_new_threads) (struct target_ops *);
 514     char *(*to_pid_to_str) (struct target_ops *, ptid_t);
 515     char *(*to_extra_thread_info) (struct thread_info *);
 516     char *(*to_thread_name) (struct thread_info *);
 517     void (*to_stop) (ptid_t);
 518     void (*to_rcmd) (char *command, struct ui_file *output);
 519     char *(*to_pid_to_exec_file) (int pid);
 520     void (*to_log_command) (const char *);
 521     struct target_section_table *(*to_get_section_table) (struct target_ops *);
 522     enum strata to_stratum;
 523     int (*to_has_all_memory) (struct target_ops *);
 524     int (*to_has_memory) (struct target_ops *);
 525     int (*to_has_stack) (struct target_ops *);
 526     int (*to_has_registers) (struct target_ops *);
 527     int (*to_has_execution) (struct target_ops *, ptid_t);
 528     int to_has_thread_control;  /* control thread execution */
 529     int to_attach_no_wait;
 530     /* ASYNC target controls */
 531     int (*to_can_async_p) (void);
 532     int (*to_is_async_p) (void);
 533     void (*to_async) (void (*) (enum inferior_event_type, void *), void *);
 534     int (*to_supports_non_stop) (void);
 535     /* find_memory_regions support method for gcore */
 536     int (*to_find_memory_regions) (find_memory_region_ftype func, void *data);
 537     /* make_corefile_notes support method for gcore */
 538     char * (*to_make_corefile_notes) (bfd *, int *);
 539     /* get_bookmark support method for bookmarks */
 540     gdb_byte * (*to_get_bookmark) (char *, int);
 541     /* goto_bookmark support method for bookmarks */
 542     void (*to_goto_bookmark) (gdb_byte *, int);
 543     /* Return the thread-local address at OFFSET in the
 544        thread-local storage for the thread PTID and the shared library
 545        or executable file given by OBJFILE.  If that block of
 546        thread-local storage hasn't been allocated yet, this function
 547        may return an error.  */
 548     CORE_ADDR (*to_get_thread_local_address) (struct target_ops *ops,
 549                                               ptid_t ptid,
 550                                               CORE_ADDR load_module_addr,
 551                                               CORE_ADDR offset);
 552
 553     /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 554        OBJECT.  The OFFSET, for a seekable object, specifies the
 555        starting point.  The ANNEX can be used to provide additional
 556        data-specific information to the target.
 557
 558        Return the number of bytes actually transfered, zero when no
 559        further transfer is possible, and -1 when the transfer is not
 560        supported.  Return of a positive value smaller than LEN does
 561        not indicate the end of the object, only the end of the
 562        transfer; higher level code should continue transferring if
 563        desired.  This is handled in target.c.
 564
 565        The interface does not support a "retry" mechanism.  Instead it
 566        assumes that at least one byte will be transfered on each
 567        successful call.
 568
 569        NOTE: cagney/2003-10-17: The current interface can lead to
 570        fragmented transfers.  Lower target levels should not implement
 571        hacks, such as enlarging the transfer, in an attempt to
 572        compensate for this.  Instead, the target stack should be
 573        extended so that it implements supply/collect methods and a
 574        look-aside object cache.  With that available, the lowest
 575        target can safely and freely "push" data up the stack.
 576
 577        See target_read and target_write for more information.  One,
 578        and only one, of readbuf or writebuf must be non-NULL.  */
 579
 580     LONGEST (*to_xfer_partial) (struct target_ops *ops,
 581                                 enum target_object object, const char *annex,
 582                                 gdb_byte *readbuf, const gdb_byte *writebuf,
 583                                 ULONGEST offset, LONGEST len);
 584
 585     /* Returns the memory map for the target.  A return value of NULL
 586        means that no memory map is available.  If a memory address
 587        does not fall within any returned regions, it's assumed to be
 588        RAM.  The returned memory regions should not overlap.
 589
 590        The order of regions does not matter; target_memory_map will
 591        sort regions by starting address.  For that reason, this
 592        function should not be called directly except via
 593        target_memory_map.
 594
 595        This method should not cache data; if the memory map could
 596        change unexpectedly, it should be invalidated, and higher
 597        layers will re-fetch it.  */
 598     VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
 599
 600     /* Erases the region of flash memory starting at ADDRESS, of
 601        length LENGTH.
 602
 603        Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
 604        on flash block boundaries, as reported by 'to_memory_map'.  */
 605     void (*to_flash_erase) (struct target_ops *,
 606                            ULONGEST address, LONGEST length);
 607
 608     /* Finishes a flash memory write sequence.  After this operation
 609        all flash memory should be available for writing and the result
 610        of reading from areas written by 'to_flash_write' should be
 611        equal to what was written.  */
 612     void (*to_flash_done) (struct target_ops *);
 613
 614     /* Describe the architecture-specific features of this target.
 615        Returns the description found, or NULL if no description
 616        was available.  */
 617     const struct target_desc *(*to_read_description) (struct target_ops *ops);
 618
 619     /* Build the PTID of the thread on which a given task is running,
 620        based on LWP and THREAD.  These values are extracted from the
 621        task Private_Data section of the Ada Task Control Block, and
 622        their interpretation depends on the target.  */
 623     ptid_t (*to_get_ada_task_ptid) (long lwp, long thread);
 624
 625     /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
 626        Return 0 if *READPTR is already at the end of the buffer.
 627        Return -1 if there is insufficient buffer for a whole entry.
 628        Return 1 if an entry was read into *TYPEP and *VALP.  */
 629     int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr,
 630                          gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp);
 631
 632     /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
 633        sequence of bytes in PATTERN with length PATTERN_LEN.
 634
 635        The result is 1 if found, 0 if not found, and -1 if there was an error
 636        requiring halting of the search (e.g. memory read error).
 637        If the pattern is found the address is recorded in FOUND_ADDRP.  */
 638     int (*to_search_memory) (struct target_ops *ops,
 639                              CORE_ADDR start_addr, ULONGEST search_space_len,
 640                              const gdb_byte *pattern, ULONGEST pattern_len,
 641                              CORE_ADDR *found_addrp);
 642
 643     /* Can target execute in reverse?  */
 644     int (*to_can_execute_reverse) (void);
 645
 646     /* The direction the target is currently executing.  Must be
 647        implemented on targets that support reverse execution and async
 648        mode.  The default simply returns forward execution.  */
 649     enum exec_direction_kind (*to_execution_direction) (void);
 650
 651     /* Does this target support debugging multiple processes
 652        simultaneously?  */
 653     int (*to_supports_multi_process) (void);
 654
 655     /* Does this target support enabling and disabling tracepoints while a trace
 656        experiment is running?  */
 657     int (*to_supports_enable_disable_tracepoint) (void);
 658
 659     /* Does this target support disabling address space randomization?  */
 660     int (*to_supports_disable_randomization) (void);
 661
 662     /* Does this target support the tracenz bytecode for string collection?  */
 663     int (*to_supports_string_tracing) (void);
 664
 665     /* Determine current architecture of thread PTID.
 666
 667        The target is supposed to determine the architecture of the code where
 668        the target is currently stopped at (on Cell, if a target is in spu_run,
 669        to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
 670        This is architecture used to perform decr_pc_after_break adjustment,
 671        and also determines the frame architecture of the innermost frame.
 672        ptrace operations need to operate according to target_gdbarch.
 673
 674        The default implementation always returns target_gdbarch.  */
 675     struct gdbarch *(*to_thread_architecture) (struct target_ops *, ptid_t);
 676
 677     /* Determine current address space of thread PTID.
 678
 679        The default implementation always returns the inferior's
 680        address space.  */
 681     struct address_space *(*to_thread_address_space) (struct target_ops *,
 682                                                       ptid_t);
 683
 684     /* Target file operations.  */
 685
 686     /* Open FILENAME on the target, using FLAGS and MODE.  Return a
 687        target file descriptor, or -1 if an error occurs (and set
 688        *TARGET_ERRNO).  */
 689     int (*to_fileio_open) (const char *filename, int flags, int mode,
 690                            int *target_errno);
 691
 692     /* Write up to LEN bytes from WRITE_BUF to FD on the target.
 693        Return the number of bytes written, or -1 if an error occurs
 694        (and set *TARGET_ERRNO).  */
 695     int (*to_fileio_pwrite) (int fd, const gdb_byte *write_buf, int len,
 696                              ULONGEST offset, int *target_errno);
 697
 698     /* Read up to LEN bytes FD on the target into READ_BUF.
 699        Return the number of bytes read, or -1 if an error occurs
 700        (and set *TARGET_ERRNO).  */
 701     int (*to_fileio_pread) (int fd, gdb_byte *read_buf, int len,
 702                             ULONGEST offset, int *target_errno);
 703
 704     /* Close FD on the target.  Return 0, or -1 if an error occurs
 705        (and set *TARGET_ERRNO).  */
 706     int (*to_fileio_close) (int fd, int *target_errno);
 707
 708     /* Unlink FILENAME on the target.  Return 0, or -1 if an error
 709        occurs (and set *TARGET_ERRNO).  */
 710     int (*to_fileio_unlink) (const char *filename, int *target_errno);
 711
 712     /* Read value of symbolic link FILENAME on the target.  Return a
 713        null-terminated string allocated via xmalloc, or NULL if an error
 714        occurs (and set *TARGET_ERRNO).  */
 715     char *(*to_fileio_readlink) (const char *filename, int *target_errno);
 716
 717
 718     /* Implement the "info proc" command.  */
 719     void (*to_info_proc) (struct target_ops *, char *, enum info_proc_what);
 720
 721     /* Tracepoint-related operations.  */
 722
 723     /* Prepare the target for a tracing run.  */
 724     void (*to_trace_init) (void);
 725
 726     /* Send full details of a tracepoint location to the target.  */
 727     void (*to_download_tracepoint) (struct bp_location *location);
 728
 729     /* Is the target able to download tracepoint locations in current
 730        state?  */
 731     int (*to_can_download_tracepoint) (void);
 732
 733     /* Send full details of a trace state variable to the target.  */
 734     void (*to_download_trace_state_variable) (struct trace_state_variable *tsv);
 735
 736     /* Enable a tracepoint on the target.  */
 737     void (*to_enable_tracepoint) (struct bp_location *location);
 738
 739     /* Disable a tracepoint on the target.  */
 740     void (*to_disable_tracepoint) (struct bp_location *location);
 741
 742     /* Inform the target info of memory regions that are readonly
 743        (such as text sections), and so it should return data from
 744        those rather than look in the trace buffer.  */
 745     void (*to_trace_set_readonly_regions) (void);
 746
 747     /* Start a trace run.  */
 748     void (*to_trace_start) (void);
 749
 750     /* Get the current status of a tracing run.  */
 751     int (*to_get_trace_status) (struct trace_status *ts);
 752
 753     void (*to_get_tracepoint_status) (struct breakpoint *tp,
 754                                       struct uploaded_tp *utp);
 755
 756     /* Stop a trace run.  */
 757     void (*to_trace_stop) (void);
 758
 759    /* Ask the target to find a trace frame of the given type TYPE,
 760       using NUM, ADDR1, and ADDR2 as search parameters.  Returns the
 761       number of the trace frame, and also the tracepoint number at
 762       TPP.  If no trace frame matches, return -1.  May throw if the
 763       operation fails.  */
 764     int (*to_trace_find) (enum trace_find_type type, int num,
 765                           ULONGEST addr1, ULONGEST addr2, int *tpp);
 766
 767     /* Get the value of the trace state variable number TSV, returning
 768        1 if the value is known and writing the value itself into the
 769        location pointed to by VAL, else returning 0.  */
 770     int (*to_get_trace_state_variable_value) (int tsv, LONGEST *val);
 771
 772     int (*to_save_trace_data) (const char *filename);
 773
 774     int (*to_upload_tracepoints) (struct uploaded_tp **utpp);
 775
 776     int (*to_upload_trace_state_variables) (struct uploaded_tsv **utsvp);
 777
 778     LONGEST (*to_get_raw_trace_data) (gdb_byte *buf,
 779                                       ULONGEST offset, LONGEST len);
 780
 781     /* Get the minimum length of instruction on which a fast tracepoint
 782        may be set on the target.  If this operation is unsupported,
 783        return -1.  If for some reason the minimum length cannot be
 784        determined, return 0.  */
 785     int (*to_get_min_fast_tracepoint_insn_len) (void);
 786
 787     /* Set the target's tracing behavior in response to unexpected
 788        disconnection - set VAL to 1 to keep tracing, 0 to stop.  */
 789     void (*to_set_disconnected_tracing) (int val);
 790     void (*to_set_circular_trace_buffer) (int val);
 791
 792     /* Add/change textual notes about the trace run, returning 1 if
 793        successful, 0 otherwise.  */
 794     int (*to_set_trace_notes) (char *user, char *notes, char* stopnotes);
 795
 796     /* Return the processor core that thread PTID was last seen on.
 797        This information is updated only when:
 798        - update_thread_list is called
 799        - thread stops
 800        If the core cannot be determined -- either for the specified
 801        thread, or right now, or in this debug session, or for this
 802        target -- return -1.  */
 803     int (*to_core_of_thread) (struct target_ops *, ptid_t ptid);
 804
 805     /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
 806        matches the contents of [DATA,DATA+SIZE).  Returns 1 if there's
 807        a match, 0 if there's a mismatch, and -1 if an error is
 808        encountered while reading memory.  */
 809     int (*to_verify_memory) (struct target_ops *, const gdb_byte *data,
 810                              CORE_ADDR memaddr, ULONGEST size);
 811
 812     /* Return the address of the start of the Thread Information Block
 813        a Windows OS specific feature.  */
 814     int (*to_get_tib_address) (ptid_t ptid, CORE_ADDR *addr);
 815
 816     /* Send the new settings of write permission variables.  */
 817     void (*to_set_permissions) (void);
 818
 819     /* Look for a static tracepoint marker at ADDR, and fill in MARKER
 820        with its details.  Return 1 on success, 0 on failure.  */
 821     int (*to_static_tracepoint_marker_at) (CORE_ADDR,
 822                                            struct static_tracepoint_marker *marker);
 823
 824     /* Return a vector of all tracepoints markers string id ID, or all
 825        markers if ID is NULL.  */
 826     VEC(static_tracepoint_marker_p) *(*to_static_tracepoint_markers_by_strid)
 827       (const char *id);
 828
 829     /* Return a traceframe info object describing the current
 830        traceframe's contents.  This method should not cache data;
 831        higher layers take care of caching, invalidating, and
 832        re-fetching when necessary.  */
 833     struct traceframe_info *(*to_traceframe_info) (void);
 834
 835     int to_magic;
 836     /* Need sub-structure for target machine related rather than comm related?
 837      */
 838   };
 839
 840 /* Magic number for checking ops size.  If a struct doesn't end with this
 841    number, somebody changed the declaration but didn't change all the
 842    places that initialize one.  */
 843
 844 #define OPS_MAGIC       3840
 845
 846 /* The ops structure for our "current" target process.  This should
 847    never be NULL.  If there is no target, it points to the dummy_target.  */
 848
 849 extern struct target_ops current_target;
 850
 851 /* Define easy words for doing these operations on our current target.  */
 852
 853 #define target_shortname        (current_target.to_shortname)
 854 #define target_longname         (current_target.to_longname)
 855
 856 /* Does whatever cleanup is required for a target that we are no
 857    longer going to be calling.  QUITTING indicates that GDB is exiting
 858    and should not get hung on an error (otherwise it is important to
 859    perform clean termination, even if it takes a while).  This routine
 860    is automatically always called after popping the target off the
 861    target stack - the target's own methods are no longer available
 862    through the target vector.  Closing file descriptors and freeing all
 863    memory allocated memory are typical things it should do.  */
 864
 865 void target_close (struct target_ops *targ, int quitting);
 866
 867 /* Attaches to a process on the target side.  Arguments are as passed
 868    to the `attach' command by the user.  This routine can be called
 869    when the target is not on the target-stack, if the target_can_run
 870    routine returns 1; in that case, it must push itself onto the stack.
 871    Upon exit, the target should be ready for normal operations, and
 872    should be ready to deliver the status of the process immediately
 873    (without waiting) to an upcoming target_wait call.  */
 874
 875 void target_attach (char *, int);
 876
 877 /* Some targets don't generate traps when attaching to the inferior,
 878    or their target_attach implementation takes care of the waiting.
 879    These targets must set to_attach_no_wait.  */
 880
 881 #define target_attach_no_wait \
 882      (current_target.to_attach_no_wait)
 883
 884 /* The target_attach operation places a process under debugger control,
 885    and stops the process.
 886
 887    This operation provides a target-specific hook that allows the
 888    necessary bookkeeping to be performed after an attach completes.  */
 889 #define target_post_attach(pid) \
 890      (*current_target.to_post_attach) (pid)
 891
 892 /* Takes a program previously attached to and detaches it.
 893    The program may resume execution (some targets do, some don't) and will
 894    no longer stop on signals, etc.  We better not have left any breakpoints
 895    in the program or it'll die when it hits one.  ARGS is arguments
 896    typed by the user (e.g. a signal to send the process).  FROM_TTY
 897    says whether to be verbose or not.  */
 898
 899 extern void target_detach (char *, int);
 900
 901 /* Disconnect from the current target without resuming it (leaving it
 902    waiting for a debugger).  */
 903
 904 extern void target_disconnect (char *, int);
 905
 906 /* Resume execution of the target process PTID.  STEP says whether to
 907    single-step or to run free; SIGGNAL is the signal to be given to
 908    the target, or TARGET_SIGNAL_0 for no signal.  The caller may not
 909    pass TARGET_SIGNAL_DEFAULT.  */
 910
 911 extern void target_resume (ptid_t ptid, int step, enum target_signal signal);
 912
 913 /* Wait for process pid to do something.  PTID = -1 to wait for any
 914    pid to do something.  Return pid of child, or -1 in case of error;
 915    store status through argument pointer STATUS.  Note that it is
 916    _NOT_ OK to throw_exception() out of target_wait() without popping
 917    the debugging target from the stack; GDB isn't prepared to get back
 918    to the prompt with a debugging target but without the frame cache,
 919    stop_pc, etc., set up.  OPTIONS is a bitwise OR of TARGET_W*
 920    options.  */
 921
 922 extern ptid_t target_wait (ptid_t ptid, struct target_waitstatus *status,
 923                            int options);
 924
 925 /* Fetch at least register REGNO, or all regs if regno == -1.  No result.  */
 926
 927 extern void target_fetch_registers (struct regcache *regcache, int regno);
 928
 929 /* Store at least register REGNO, or all regs if REGNO == -1.
 930    It can store as many registers as it wants to, so target_prepare_to_store
 931    must have been previously called.  Calls error() if there are problems.  */
 932
 933 extern void target_store_registers (struct regcache *regcache, int regs);
 934
 935 /* Get ready to modify the registers array.  On machines which store
 936    individual registers, this doesn't need to do anything.  On machines
 937    which store all the registers in one fell swoop, this makes sure
 938    that REGISTERS contains all the registers from the program being
 939    debugged.  */
 940
 941 #define target_prepare_to_store(regcache)       \
 942      (*current_target.to_prepare_to_store) (regcache)
 943
 944 /* Determine current address space of thread PTID.  */
 945
 946 struct address_space *target_thread_address_space (ptid_t);
 947
 948 /* Implement the "info proc" command.  */
 949
 950 void target_info_proc (char *, enum info_proc_what);
 951
 952 /* Returns true if this target can debug multiple processes
 953    simultaneously.  */
 954
 955 #define target_supports_multi_process() \
 956      (*current_target.to_supports_multi_process) ()
 957
 958 /* Returns true if this target can disable address space randomization.  */
 959
 960 int target_supports_disable_randomization (void);
 961
 962 /* Returns true if this target can enable and disable tracepoints
 963    while a trace experiment is running.  */
 964
 965 #define target_supports_enable_disable_tracepoint() \
 966   (*current_target.to_supports_enable_disable_tracepoint) ()
 967
 968 #define target_supports_string_tracing() \
 969   (*current_target.to_supports_string_tracing) ()
 970
 971 /* Invalidate all target dcaches.  */
 972 extern void target_dcache_invalidate (void);
 973
 974 extern int target_read_string (CORE_ADDR, char **, int, int *);
 975
 976 extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len);
 977
 978 extern int target_read_stack (CORE_ADDR memaddr, gdb_byte *myaddr, int len);
 979
 980 extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
 981                                 int len);
 982
 983 extern int target_write_raw_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
 984                                     int len);
 985
 986 /* Fetches the target's memory map.  If one is found it is sorted
 987    and returned, after some consistency checking.  Otherwise, NULL
 988    is returned.  */
 989 VEC(mem_region_s) *target_memory_map (void);
 990
 991 /* Erase the specified flash region.  */
 992 void target_flash_erase (ULONGEST address, LONGEST length);
 993
 994 /* Finish a sequence of flash operations.  */
 995 void target_flash_done (void);
 996
 997 /* Describes a request for a memory write operation.  */
 998 struct memory_write_request
 999   {
1000     /* Begining address that must be written.  */
1001     ULONGEST begin;
1002     /* Past-the-end address.  */
1003     ULONGEST end;
1004     /* The data to write.  */
1005     gdb_byte *data;
1006     /* A callback baton for progress reporting for this request.  */
1007     void *baton;
1008   };
1009 typedef struct memory_write_request memory_write_request_s;
1010 DEF_VEC_O(memory_write_request_s);
1011
1012 /* Enumeration specifying different flash preservation behaviour.  */
1013 enum flash_preserve_mode
1014   {
1015     flash_preserve,
1016     flash_discard
1017   };
1018
1019 /* Write several memory blocks at once.  This version can be more
1020    efficient than making several calls to target_write_memory, in
1021    particular because it can optimize accesses to flash memory.
1022
1023    Moreover, this is currently the only memory access function in gdb
1024    that supports writing to flash memory, and it should be used for
1025    all cases where access to flash memory is desirable.
1026
1027    REQUESTS is the vector (see vec.h) of memory_write_request.
1028    PRESERVE_FLASH_P indicates what to do with blocks which must be
1029      erased, but not completely rewritten.
1030    PROGRESS_CB is a function that will be periodically called to provide
1031      feedback to user.  It will be called with the baton corresponding
1032      to the request currently being written.  It may also be called
1033      with a NULL baton, when preserved flash sectors are being rewritten.
1034
1035    The function returns 0 on success, and error otherwise.  */
1036 int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
1037                                 enum flash_preserve_mode preserve_flash_p,
1038                                 void (*progress_cb) (ULONGEST, void *));
1039
1040 /* From infrun.c.  */
1041
1042 extern int inferior_has_forked (ptid_t pid, ptid_t *child_pid);
1043
1044 extern int inferior_has_vforked (ptid_t pid, ptid_t *child_pid);
1045
1046 extern int inferior_has_execd (ptid_t pid, char **execd_pathname);
1047
1048 extern int inferior_has_called_syscall (ptid_t pid, int *syscall_number);
1049
1050 /* Print a line about the current target.  */
1051
1052 #define target_files_info()     \
1053      (*current_target.to_files_info) (&current_target)
1054
1055 /* Insert a breakpoint at address BP_TGT->placed_address in the target
1056    machine.  Result is 0 for success, or an errno value.  */
1057
1058 extern int target_insert_breakpoint (struct gdbarch *gdbarch,
1059                                      struct bp_target_info *bp_tgt);
1060
1061 /* Remove a breakpoint at address BP_TGT->placed_address in the target
1062    machine.  Result is 0 for success, or an errno value.  */
1063
1064 extern int target_remove_breakpoint (struct gdbarch *gdbarch,
1065                                      struct bp_target_info *bp_tgt);
1066
1067 /* Initialize the terminal settings we record for the inferior,
1068    before we actually run the inferior.  */
1069
1070 #define target_terminal_init() \
1071      (*current_target.to_terminal_init) ()
1072
1073 /* Put the inferior's terminal settings into effect.
1074    This is preparation for starting or resuming the inferior.  */
1075
1076 extern void target_terminal_inferior (void);
1077
1078 /* Put some of our terminal settings into effect,
1079    enough to get proper results from our output,
1080    but do not change into or out of RAW mode
1081    so that no input is discarded.
1082
1083    After doing this, either terminal_ours or terminal_inferior
1084    should be called to get back to a normal state of affairs.  */
1085
1086 #define target_terminal_ours_for_output() \
1087      (*current_target.to_terminal_ours_for_output) ()
1088
1089 /* Put our terminal settings into effect.
1090    First record the inferior's terminal settings
1091    so they can be restored properly later.  */
1092
1093 #define target_terminal_ours() \
1094      (*current_target.to_terminal_ours) ()
1095
1096 /* Save our terminal settings.
1097    This is called from TUI after entering or leaving the curses
1098    mode.  Since curses modifies our terminal this call is here
1099    to take this change into account.  */
1100
1101 #define target_terminal_save_ours() \
1102      (*current_target.to_terminal_save_ours) ()
1103
1104 /* Print useful information about our terminal status, if such a thing
1105    exists.  */
1106
1107 #define target_terminal_info(arg, from_tty) \
1108      (*current_target.to_terminal_info) (arg, from_tty)
1109
1110 /* Kill the inferior process.   Make it go away.  */
1111
1112 extern void target_kill (void);
1113
1114 /* Load an executable file into the target process.  This is expected
1115    to not only bring new code into the target process, but also to
1116    update GDB's symbol tables to match.
1117
1118    ARG contains command-line arguments, to be broken down with
1119    buildargv ().  The first non-switch argument is the filename to
1120    load, FILE; the second is a number (as parsed by strtoul (..., ...,
1121    0)), which is an offset to apply to the load addresses of FILE's
1122    sections.  The target may define switches, or other non-switch
1123    arguments, as it pleases.  */
1124
1125 extern void target_load (char *arg, int from_tty);
1126
1127 /* Start an inferior process and set inferior_ptid to its pid.
1128    EXEC_FILE is the file to run.
1129    ALLARGS is a string containing the arguments to the program.
1130    ENV is the environment vector to pass.  Errors reported with error().
1131    On VxWorks and various standalone systems, we ignore exec_file.  */
1132
1133 void target_create_inferior (char *exec_file, char *args,
1134                              char **env, int from_tty);
1135
1136 /* Some targets (such as ttrace-based HPUX) don't allow us to request
1137    notification of inferior events such as fork and vork immediately
1138    after the inferior is created.  (This because of how gdb gets an
1139    inferior created via invoking a shell to do it.  In such a scenario,
1140    if the shell init file has commands in it, the shell will fork and
1141    exec for each of those commands, and we will see each such fork
1142    event.  Very bad.)
1143
1144    Such targets will supply an appropriate definition for this function.  */
1145
1146 #define target_post_startup_inferior(ptid) \
1147      (*current_target.to_post_startup_inferior) (ptid)
1148
1149 /* On some targets, we can catch an inferior fork or vfork event when
1150    it occurs.  These functions insert/remove an already-created
1151    catchpoint for such events.  They return  0 for success, 1 if the
1152    catchpoint type is not supported and -1 for failure.  */
1153
1154 #define target_insert_fork_catchpoint(pid) \
1155      (*current_target.to_insert_fork_catchpoint) (pid)
1156
1157 #define target_remove_fork_catchpoint(pid) \
1158      (*current_target.to_remove_fork_catchpoint) (pid)
1159
1160 #define target_insert_vfork_catchpoint(pid) \
1161      (*current_target.to_insert_vfork_catchpoint) (pid)
1162
1163 #define target_remove_vfork_catchpoint(pid) \
1164      (*current_target.to_remove_vfork_catchpoint) (pid)
1165
1166 /* If the inferior forks or vforks, this function will be called at
1167    the next resume in order to perform any bookkeeping and fiddling
1168    necessary to continue debugging either the parent or child, as
1169    requested, and releasing the other.  Information about the fork
1170    or vfork event is available via get_last_target_status ().
1171    This function returns 1 if the inferior should not be resumed
1172    (i.e. there is another event pending).  */
1173
1174 int target_follow_fork (int follow_child);
1175
1176 /* On some targets, we can catch an inferior exec event when it
1177    occurs.  These functions insert/remove an already-created
1178    catchpoint for such events.  They return  0 for success, 1 if the
1179    catchpoint type is not supported and -1 for failure.  */
1180
1181 #define target_insert_exec_catchpoint(pid) \
1182      (*current_target.to_insert_exec_catchpoint) (pid)
1183
1184 #define target_remove_exec_catchpoint(pid) \
1185      (*current_target.to_remove_exec_catchpoint) (pid)
1186
1187 /* Syscall catch.
1188
1189    NEEDED is nonzero if any syscall catch (of any kind) is requested.
1190    If NEEDED is zero, it means the target can disable the mechanism to
1191    catch system calls because there are no more catchpoints of this type.
1192
1193    ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
1194    being requested.  In this case, both TABLE_SIZE and TABLE should
1195    be ignored.
1196
1197    TABLE_SIZE is the number of elements in TABLE.  It only matters if
1198    ANY_COUNT is zero.
1199
1200    TABLE is an array of ints, indexed by syscall number.  An element in
1201    this array is nonzero if that syscall should be caught.  This argument
1202    only matters if ANY_COUNT is zero.
1203
1204    Return 0 for success, 1 if syscall catchpoints are not supported or -1
1205    for failure.  */
1206
1207 #define target_set_syscall_catchpoint(pid, needed, any_count, table_size, table) \
1208      (*current_target.to_set_syscall_catchpoint) (pid, needed, any_count, \
1209                                                   table_size, table)
1210
1211 /* Returns TRUE if PID has exited.  And, also sets EXIT_STATUS to the
1212    exit code of PID, if any.  */
1213
1214 #define target_has_exited(pid,wait_status,exit_status) \
1215      (*current_target.to_has_exited) (pid,wait_status,exit_status)
1216
1217 /* The debugger has completed a blocking wait() call.  There is now
1218    some process event that must be processed.  This function should
1219    be defined by those targets that require the debugger to perform
1220    cleanup or internal state changes in response to the process event.  */
1221
1222 /* The inferior process has died.  Do what is right.  */
1223
1224 void target_mourn_inferior (void);
1225
1226 /* Does target have enough data to do a run or attach command? */
1227
1228 #define target_can_run(t) \
1229      ((t)->to_can_run) ()
1230
1231 /* Set list of signals to be handled in the target.
1232
1233    PASS_SIGNALS is an array of size NSIG, indexed by target signal number
1234    (enum target_signal).  For every signal whose entry in this array is
1235    non-zero, the target is allowed -but not required- to skip reporting
1236    arrival of the signal to the GDB core by returning from target_wait,
1237    and to pass the signal directly to the inferior instead.
1238
1239    However, if the target is hardware single-stepping a thread that is
1240    about to receive a signal, it needs to be reported in any case, even
1241    if mentioned in a previous target_pass_signals call.   */
1242
1243 extern void target_pass_signals (int nsig, unsigned char *pass_signals);
1244
1245 /* Check to see if a thread is still alive.  */
1246
1247 extern int target_thread_alive (ptid_t ptid);
1248
1249 /* Query for new threads and add them to the thread list.  */
1250
1251 extern void target_find_new_threads (void);
1252
1253 /* Make target stop in a continuable fashion.  (For instance, under
1254    Unix, this should act like SIGSTOP).  This function is normally
1255    used by GUIs to implement a stop button.  */
1256
1257 extern void target_stop (ptid_t ptid);
1258
1259 /* Send the specified COMMAND to the target's monitor
1260    (shell,interpreter) for execution.  The result of the query is
1261    placed in OUTBUF.  */
1262
1263 #define target_rcmd(command, outbuf) \
1264      (*current_target.to_rcmd) (command, outbuf)
1265
1266
1267 /* Does the target include all of memory, or only part of it?  This
1268    determines whether we look up the target chain for other parts of
1269    memory if this target can't satisfy a request.  */
1270
1271 extern int target_has_all_memory_1 (void);
1272 #define target_has_all_memory target_has_all_memory_1 ()
1273
1274 /* Does the target include memory?  (Dummy targets don't.)  */
1275
1276 extern int target_has_memory_1 (void);
1277 #define target_has_memory target_has_memory_1 ()
1278
1279 /* Does the target have a stack?  (Exec files don't, VxWorks doesn't, until
1280    we start a process.)  */
1281
1282 extern int target_has_stack_1 (void);
1283 #define target_has_stack target_has_stack_1 ()
1284
1285 /* Does the target have registers?  (Exec files don't.)  */
1286
1287 extern int target_has_registers_1 (void);
1288 #define target_has_registers target_has_registers_1 ()
1289
1290 /* Does the target have execution?  Can we make it jump (through
1291    hoops), or pop its stack a few times?  This means that the current
1292    target is currently executing; for some targets, that's the same as
1293    whether or not the target is capable of execution, but there are
1294    also targets which can be current while not executing.  In that
1295    case this will become true after target_create_inferior or
1296    target_attach.  */
1297
1298 extern int target_has_execution_1 (ptid_t);
1299
1300 /* Like target_has_execution_1, but always passes inferior_ptid.  */
1301
1302 extern int target_has_execution_current (void);
1303
1304 #define target_has_execution target_has_execution_current ()
1305
1306 /* Default implementations for process_stratum targets.  Return true
1307    if there's a selected inferior, false otherwise.  */
1308
1309 extern int default_child_has_all_memory (struct target_ops *ops);
1310 extern int default_child_has_memory (struct target_ops *ops);
1311 extern int default_child_has_stack (struct target_ops *ops);
1312 extern int default_child_has_registers (struct target_ops *ops);
1313 extern int default_child_has_execution (struct target_ops *ops,
1314                                         ptid_t the_ptid);
1315
1316 /* Can the target support the debugger control of thread execution?
1317    Can it lock the thread scheduler?  */
1318
1319 #define target_can_lock_scheduler \
1320      (current_target.to_has_thread_control & tc_schedlock)
1321
1322 /* Should the target enable async mode if it is supported?  Temporary
1323    cludge until async mode is a strict superset of sync mode.  */
1324 extern int target_async_permitted;
1325
1326 /* Can the target support asynchronous execution?  */
1327 #define target_can_async_p() (current_target.to_can_async_p ())
1328
1329 /* Is the target in asynchronous execution mode?  */
1330 #define target_is_async_p() (current_target.to_is_async_p ())
1331
1332 int target_supports_non_stop (void);
1333
1334 /* Put the target in async mode with the specified callback function.  */
1335 #define target_async(CALLBACK,CONTEXT) \
1336      (current_target.to_async ((CALLBACK), (CONTEXT)))
1337
1338 #define target_execution_direction() \
1339   (current_target.to_execution_direction ())
1340
1341 /* Converts a process id to a string.  Usually, the string just contains
1342    `process xyz', but on some systems it may contain
1343    `process xyz thread abc'.  */
1344
1345 extern char *target_pid_to_str (ptid_t ptid);
1346
1347 extern char *normal_pid_to_str (ptid_t ptid);
1348
1349 /* Return a short string describing extra information about PID,
1350    e.g. "sleeping", "runnable", "running on LWP 3".  Null return value
1351    is okay.  */
1352
1353 #define target_extra_thread_info(TP) \
1354      (current_target.to_extra_thread_info (TP))
1355
1356 /* Return the thread's name.  A NULL result means that the target
1357    could not determine this thread's name.  */
1358
1359 extern char *target_thread_name (struct thread_info *);
1360
1361 /* Attempts to find the pathname of the executable file
1362    that was run to create a specified process.
1363
1364    The process PID must be stopped when this operation is used.
1365
1366    If the executable file cannot be determined, NULL is returned.
1367
1368    Else, a pointer to a character string containing the pathname
1369    is returned.  This string should be copied into a buffer by
1370    the client if the string will not be immediately used, or if
1371    it must persist.  */
1372
1373 #define target_pid_to_exec_file(pid) \
1374      (current_target.to_pid_to_exec_file) (pid)
1375
1376 /* See the to_thread_architecture description in struct target_ops.  */
1377
1378 #define target_thread_architecture(ptid) \
1379      (current_target.to_thread_architecture (&current_target, ptid))
1380
1381 /*
1382  * Iterator function for target memory regions.
1383  * Calls a callback function once for each memory region 'mapped'
1384  * in the child process.  Defined as a simple macro rather than
1385  * as a function macro so that it can be tested for nullity.
1386  */
1387
1388 #define target_find_memory_regions(FUNC, DATA) \
1389      (current_target.to_find_memory_regions) (FUNC, DATA)
1390
1391 /*
1392  * Compose corefile .note section.
1393  */
1394
1395 #define target_make_corefile_notes(BFD, SIZE_P) \
1396      (current_target.to_make_corefile_notes) (BFD, SIZE_P)
1397
1398 /* Bookmark interfaces.  */
1399 #define target_get_bookmark(ARGS, FROM_TTY) \
1400      (current_target.to_get_bookmark) (ARGS, FROM_TTY)
1401
1402 #define target_goto_bookmark(ARG, FROM_TTY) \
1403      (current_target.to_goto_bookmark) (ARG, FROM_TTY)
1404
1405 /* Hardware watchpoint interfaces.  */
1406
1407 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1408    write).  Only the INFERIOR_PTID task is being queried.  */
1409
1410 #define target_stopped_by_watchpoint \
1411    (*current_target.to_stopped_by_watchpoint)
1412
1413 /* Non-zero if we have steppable watchpoints  */
1414
1415 #define target_have_steppable_watchpoint \
1416    (current_target.to_have_steppable_watchpoint)
1417
1418 /* Non-zero if we have continuable watchpoints  */
1419
1420 #define target_have_continuable_watchpoint \
1421    (current_target.to_have_continuable_watchpoint)
1422
1423 /* Provide defaults for hardware watchpoint functions.  */
1424
1425 /* If the *_hw_beakpoint functions have not been defined
1426    elsewhere use the definitions in the target vector.  */
1427
1428 /* Returns non-zero if we can set a hardware watchpoint of type TYPE.  TYPE is
1429    one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1430    bp_hardware_breakpoint.  CNT is the number of such watchpoints used so far
1431    (including this one?).  OTHERTYPE is who knows what...  */
1432
1433 #define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
1434  (*current_target.to_can_use_hw_breakpoint) (TYPE, CNT, OTHERTYPE);
1435
1436 /* Returns the number of debug registers needed to watch the given
1437    memory region, or zero if not supported.  */
1438
1439 #define target_region_ok_for_hw_watchpoint(addr, len) \
1440     (*current_target.to_region_ok_for_hw_watchpoint) (addr, len)
1441
1442
1443 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
1444    TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
1445    COND is the expression for its condition, or NULL if there's none.
1446    Returns 0 for success, 1 if the watchpoint type is not supported,
1447    -1 for failure.  */
1448
1449 #define target_insert_watchpoint(addr, len, type, cond) \
1450      (*current_target.to_insert_watchpoint) (addr, len, type, cond)
1451
1452 #define target_remove_watchpoint(addr, len, type, cond) \
1453      (*current_target.to_remove_watchpoint) (addr, len, type, cond)
1454
1455 /* Insert a new masked watchpoint at ADDR using the mask MASK.
1456    RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1457    or hw_access for an access watchpoint.  Returns 0 for success, 1 if
1458    masked watchpoints are not supported, -1 for failure.  */
1459
1460 extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1461
1462 /* Remove a masked watchpoint at ADDR with the mask MASK.
1463    RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1464    or hw_access for an access watchpoint.  Returns 0 for success, non-zero
1465    for failure.  */
1466
1467 extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1468
1469 #define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
1470      (*current_target.to_insert_hw_breakpoint) (gdbarch, bp_tgt)
1471
1472 #define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
1473      (*current_target.to_remove_hw_breakpoint) (gdbarch, bp_tgt)
1474
1475 /* Return number of debug registers needed for a ranged breakpoint,
1476    or -1 if ranged breakpoints are not supported.  */
1477
1478 extern int target_ranged_break_num_registers (void);
1479
1480 /* Return non-zero if target knows the data address which triggered this
1481    target_stopped_by_watchpoint, in such case place it to *ADDR_P.  Only the
1482    INFERIOR_PTID task is being queried.  */
1483 #define target_stopped_data_address(target, addr_p) \
1484     (*target.to_stopped_data_address) (target, addr_p)
1485
1486 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1487   (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1488
1489 /* Return non-zero if the target is capable of using hardware to evaluate
1490    the condition expression.  In this case, if the condition is false when
1491    the watched memory location changes, execution may continue without the
1492    debugger being notified.
1493
1494    Due to limitations in the hardware implementation, it may be capable of
1495    avoiding triggering the watchpoint in some cases where the condition
1496    expression is false, but may report some false positives as well.
1497    For this reason, GDB will still evaluate the condition expression when
1498    the watchpoint triggers.  */
1499 #define target_can_accel_watchpoint_condition(addr, len, type, cond) \
1500   (*current_target.to_can_accel_watchpoint_condition) (addr, len, type, cond)
1501
1502 /* Return number of debug registers needed for a masked watchpoint,
1503    -1 if masked watchpoints are not supported or -2 if the given address
1504    and mask combination cannot be used.  */
1505
1506 extern int target_masked_watch_num_registers (CORE_ADDR addr, CORE_ADDR mask);
1507
1508 /* Target can execute in reverse?  */
1509 #define target_can_execute_reverse \
1510      (current_target.to_can_execute_reverse ? \
1511       current_target.to_can_execute_reverse () : 0)
1512
1513 extern const struct target_desc *target_read_description (struct target_ops *);
1514
1515 #define target_get_ada_task_ptid(lwp, tid) \
1516      (*current_target.to_get_ada_task_ptid) (lwp,tid)
1517
1518 /* Utility implementation of searching memory.  */
1519 extern int simple_search_memory (struct target_ops* ops,
1520                                  CORE_ADDR start_addr,
1521                                  ULONGEST search_space_len,
1522                                  const gdb_byte *pattern,
1523                                  ULONGEST pattern_len,
1524                                  CORE_ADDR *found_addrp);
1525
1526 /* Main entry point for searching memory.  */
1527 extern int target_search_memory (CORE_ADDR start_addr,
1528                                  ULONGEST search_space_len,
1529                                  const gdb_byte *pattern,
1530                                  ULONGEST pattern_len,
1531                                  CORE_ADDR *found_addrp);
1532
1533 /* Target file operations.  */
1534
1535 /* Open FILENAME on the target, using FLAGS and MODE.  Return a
1536    target file descriptor, or -1 if an error occurs (and set
1537    *TARGET_ERRNO).  */
1538 extern int target_fileio_open (const char *filename, int flags, int mode,
1539                                int *target_errno);
1540
1541 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
1542    Return the number of bytes written, or -1 if an error occurs
1543    (and set *TARGET_ERRNO).  */
1544 extern int target_fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
1545                                  ULONGEST offset, int *target_errno);
1546
1547 /* Read up to LEN bytes FD on the target into READ_BUF.
1548    Return the number of bytes read, or -1 if an error occurs
1549    (and set *TARGET_ERRNO).  */
1550 extern int target_fileio_pread (int fd, gdb_byte *read_buf, int len,
1551                                 ULONGEST offset, int *target_errno);
1552
1553 /* Close FD on the target.  Return 0, or -1 if an error occurs
1554    (and set *TARGET_ERRNO).  */
1555 extern int target_fileio_close (int fd, int *target_errno);
1556
1557 /* Unlink FILENAME on the target.  Return 0, or -1 if an error
1558    occurs (and set *TARGET_ERRNO).  */
1559 extern int target_fileio_unlink (const char *filename, int *target_errno);
1560
1561 /* Read value of symbolic link FILENAME on the target.  Return a
1562    null-terminated string allocated via xmalloc, or NULL if an error
1563    occurs (and set *TARGET_ERRNO).  */
1564 extern char *target_fileio_readlink (const char *filename, int *target_errno);
1565
1566 /* Read target file FILENAME.  The return value will be -1 if the transfer
1567    fails or is not supported; 0 if the object is empty; or the length
1568    of the object otherwise.  If a positive value is returned, a
1569    sufficiently large buffer will be allocated using xmalloc and
1570    returned in *BUF_P containing the contents of the object.
1571
1572    This method should be used for objects sufficiently small to store
1573    in a single xmalloc'd buffer, when no fixed bound on the object's
1574    size is known in advance.  */
1575 extern LONGEST target_fileio_read_alloc (const char *filename,
1576                                          gdb_byte **buf_p);
1577
1578 /* Read target file FILENAME.  The result is NUL-terminated and
1579    returned as a string, allocated using xmalloc.  If an error occurs
1580    or the transfer is unsupported, NULL is returned.  Empty objects
1581    are returned as allocated but empty strings.  A warning is issued
1582    if the result contains any embedded NUL bytes.  */
1583 extern char *target_fileio_read_stralloc (const char *filename);
1584
1585
1586 /* Tracepoint-related operations.  */
1587
1588 #define target_trace_init() \
1589   (*current_target.to_trace_init) ()
1590
1591 #define target_download_tracepoint(t) \
1592   (*current_target.to_download_tracepoint) (t)
1593
1594 #define target_can_download_tracepoint() \
1595   (*current_target.to_can_download_tracepoint) ()
1596
1597 #define target_download_trace_state_variable(tsv) \
1598   (*current_target.to_download_trace_state_variable) (tsv)
1599
1600 #define target_enable_tracepoint(loc) \
1601   (*current_target.to_enable_tracepoint) (loc)
1602
1603 #define target_disable_tracepoint(loc) \
1604   (*current_target.to_disable_tracepoint) (loc)
1605
1606 #define target_trace_start() \
1607   (*current_target.to_trace_start) ()
1608
1609 #define target_trace_set_readonly_regions() \
1610   (*current_target.to_trace_set_readonly_regions) ()
1611
1612 #define target_get_trace_status(ts) \
1613   (*current_target.to_get_trace_status) (ts)
1614
1615 #define target_get_tracepoint_status(tp,utp)            \
1616   (*current_target.to_get_tracepoint_status) (tp, utp)
1617
1618 #define target_trace_stop() \
1619   (*current_target.to_trace_stop) ()
1620
1621 #define target_trace_find(type,num,addr1,addr2,tpp) \
1622   (*current_target.to_trace_find) ((type), (num), (addr1), (addr2), (tpp))
1623
1624 #define target_get_trace_state_variable_value(tsv,val) \
1625   (*current_target.to_get_trace_state_variable_value) ((tsv), (val))
1626
1627 #define target_save_trace_data(filename) \
1628   (*current_target.to_save_trace_data) (filename)
1629
1630 #define target_upload_tracepoints(utpp) \
1631   (*current_target.to_upload_tracepoints) (utpp)
1632
1633 #define target_upload_trace_state_variables(utsvp) \
1634   (*current_target.to_upload_trace_state_variables) (utsvp)
1635
1636 #define target_get_raw_trace_data(buf,offset,len) \
1637   (*current_target.to_get_raw_trace_data) ((buf), (offset), (len))
1638
1639 #define target_get_min_fast_tracepoint_insn_len() \
1640   (*current_target.to_get_min_fast_tracepoint_insn_len) ()
1641
1642 #define target_set_disconnected_tracing(val) \
1643   (*current_target.to_set_disconnected_tracing) (val)
1644
1645 #define target_set_circular_trace_buffer(val)   \
1646   (*current_target.to_set_circular_trace_buffer) (val)
1647
1648 #define target_set_trace_notes(user,notes,stopnotes)            \
1649   (*current_target.to_set_trace_notes) ((user), (notes), (stopnotes))
1650
1651 #define target_get_tib_address(ptid, addr) \
1652   (*current_target.to_get_tib_address) ((ptid), (addr))
1653
1654 #define target_set_permissions() \
1655   (*current_target.to_set_permissions) ()
1656
1657 #define target_static_tracepoint_marker_at(addr, marker) \
1658   (*current_target.to_static_tracepoint_marker_at) (addr, marker)
1659
1660 #define target_static_tracepoint_markers_by_strid(marker_id) \
1661   (*current_target.to_static_tracepoint_markers_by_strid) (marker_id)
1662
1663 #define target_traceframe_info() \
1664   (*current_target.to_traceframe_info) ()
1665
1666 /* Command logging facility.  */
1667
1668 #define target_log_command(p)                                           \
1669   do                                                                    \
1670     if (current_target.to_log_command)                                  \
1671       (*current_target.to_log_command) (p);                             \
1672   while (0)
1673
1674
1675 extern int target_core_of_thread (ptid_t ptid);
1676
1677 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
1678    the contents of [DATA,DATA+SIZE).  Returns 1 if there's a match, 0
1679    if there's a mismatch, and -1 if an error is encountered while
1680    reading memory.  Throws an error if the functionality is found not
1681    to be supported by the current target.  */
1682 int target_verify_memory (const gdb_byte *data,
1683                           CORE_ADDR memaddr, ULONGEST size);
1684
1685 /* Routines for maintenance of the target structures...
1686
1687    add_target:   Add a target to the list of all possible targets.
1688
1689    push_target:  Make this target the top of the stack of currently used
1690    targets, within its particular stratum of the stack.  Result
1691    is 0 if now atop the stack, nonzero if not on top (maybe
1692    should warn user).
1693
1694    unpush_target: Remove this from the stack of currently used targets,
1695    no matter where it is on the list.  Returns 0 if no
1696    change, 1 if removed from stack.
1697
1698    pop_target:   Remove the top thing on the stack of current targets.  */
1699
1700 extern void add_target (struct target_ops *);
1701
1702 extern void push_target (struct target_ops *);
1703
1704 extern int unpush_target (struct target_ops *);
1705
1706 extern void target_pre_inferior (int);
1707
1708 extern void target_preopen (int);
1709
1710 extern void pop_target (void);
1711
1712 /* Does whatever cleanup is required to get rid of all pushed targets.
1713    QUITTING is propagated to target_close; it indicates that GDB is
1714    exiting and should not get hung on an error (otherwise it is
1715    important to perform clean termination, even if it takes a
1716    while).  */
1717 extern void pop_all_targets (int quitting);
1718
1719 /* Like pop_all_targets, but pops only targets whose stratum is
1720    strictly above ABOVE_STRATUM.  */
1721 extern void pop_all_targets_above (enum strata above_stratum, int quitting);
1722
1723 extern int target_is_pushed (struct target_ops *t);
1724
1725 extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
1726                                                CORE_ADDR offset);
1727
1728 /* Struct target_section maps address ranges to file sections.  It is
1729    mostly used with BFD files, but can be used without (e.g. for handling
1730    raw disks, or files not in formats handled by BFD).  */
1731
1732 struct target_section
1733   {
1734     CORE_ADDR addr;             /* Lowest address in section */
1735     CORE_ADDR endaddr;          /* 1+highest address in section */
1736
1737     struct bfd_section *the_bfd_section;
1738
1739     bfd *bfd;                   /* BFD file pointer */
1740   };
1741
1742 /* Holds an array of target sections.  Defined by [SECTIONS..SECTIONS_END[.  */
1743
1744 struct target_section_table
1745 {
1746   struct target_section *sections;
1747   struct target_section *sections_end;
1748 };
1749
1750 /* Return the "section" containing the specified address.  */
1751 struct target_section *target_section_by_addr (struct target_ops *target,
1752                                                CORE_ADDR addr);
1753
1754 /* Return the target section table this target (or the targets
1755    beneath) currently manipulate.  */
1756
1757 extern struct target_section_table *target_get_section_table
1758   (struct target_ops *target);
1759
1760 /* From mem-break.c */
1761
1762 extern int memory_remove_breakpoint (struct gdbarch *,
1763                                      struct bp_target_info *);
1764
1765 extern int memory_insert_breakpoint (struct gdbarch *,
1766                                      struct bp_target_info *);
1767
1768 extern int default_memory_remove_breakpoint (struct gdbarch *,
1769                                              struct bp_target_info *);
1770
1771 extern int default_memory_insert_breakpoint (struct gdbarch *,
1772                                              struct bp_target_info *);
1773
1774
1775 /* From target.c */
1776
1777 extern void initialize_targets (void);
1778
1779 extern void noprocess (void) ATTRIBUTE_NORETURN;
1780
1781 extern void target_require_runnable (void);
1782
1783 extern void find_default_attach (struct target_ops *, char *, int);
1784
1785 extern void find_default_create_inferior (struct target_ops *,
1786                                           char *, char *, char **, int);
1787
1788 extern struct target_ops *find_run_target (void);
1789
1790 extern struct target_ops *find_target_beneath (struct target_ops *);
1791
1792 /* Read OS data object of type TYPE from the target, and return it in
1793    XML format.  The result is NUL-terminated and returned as a string,
1794    allocated using xmalloc.  If an error occurs or the transfer is
1795    unsupported, NULL is returned.  Empty objects are returned as
1796    allocated but empty strings.  */
1797
1798 extern char *target_get_osdata (const char *type);
1799
1800 \f
1801 /* Stuff that should be shared among the various remote targets.  */
1802
1803 /* Debugging level.  0 is off, and non-zero values mean to print some debug
1804    information (higher values, more information).  */
1805 extern int remote_debug;
1806
1807 /* Speed in bits per second, or -1 which means don't mess with the speed.  */
1808 extern int baud_rate;
1809 /* Timeout limit for response from target.  */
1810 extern int remote_timeout;
1811
1812 \f
1813 /* Functions for helping to write a native target.  */
1814
1815 /* This is for native targets which use a unix/POSIX-style waitstatus.  */
1816 extern void store_waitstatus (struct target_waitstatus *, int);
1817
1818 /* These are in common/signals.c, but they're only used by gdb.  */
1819 extern enum target_signal default_target_signal_from_host (struct gdbarch *,
1820                                                            int);
1821 extern int default_target_signal_to_host (struct gdbarch *,
1822                                           enum target_signal);
1823
1824 /* Convert from a number used in a GDB command to an enum target_signal.  */
1825 extern enum target_signal target_signal_from_command (int);
1826 /* End of files in common/signals.c.  */
1827
1828 /* Set the show memory breakpoints mode to show, and installs a cleanup
1829    to restore it back to the current value.  */
1830 extern struct cleanup *make_show_memory_breakpoints_cleanup (int show);
1831
1832 extern int may_write_registers;
1833 extern int may_write_memory;
1834 extern int may_insert_breakpoints;
1835 extern int may_insert_tracepoints;
1836 extern int may_insert_fast_tracepoints;
1837 extern int may_stop;
1838
1839 extern void update_target_permissions (void);
1840
1841 \f
1842 /* Imported from machine dependent code.  */
1843
1844 /* Blank target vector entries are initialized to target_ignore.  */
1845 void target_ignore (void);
1846
1847 #endif /* !defined (TARGET_H) */