1 2015-04-17 Gary Benson <gbenson@redhat.com>
3 * gdb.server/server-exec-info.exp: Inhibit GDB from accessing
4 the main executable over the remote protocol.
6 2015-04-16 Pedro Alves <palves@redhat.com>
8 * boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
9 a new gdbserver if gdbserver_reconnect_p is set.
11 2015-04-16 Pedro Alves <palves@redhat.com>
13 * lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
14 is set, don't exit gdbserver.
16 2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
18 * gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
19 appropriate .insn, such that an older assembler can be used.
20 * gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
21 the z/Architecture instruction set on 31-bit targets as well.
23 2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
25 * gdb.go/handcall.exp: Remove all logic related to the first
26 breakpoint and rely on go_runto_main instead.
27 * gdb.go/strings.exp: Likewise.
28 * gdb.go/unsafe.exp: Likewise.
29 * gdb.go/hello.exp: Likewise. Also rename the remaining
30 breakpoint marker to "breakpoint 1".
31 * gdb.go/handcall.go: Remove comment "set breakpoint 1 here".
32 * gdb.go/strings.go: Likewise.
33 * gdb.go/unsafe.go: Likewise.
34 * gdb.go/hello.go: Likewise. Also remove the second occurrence of
35 "set breakpoint 2 here" and rename the remaining breakpoint marker
38 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
40 * gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function
41 if itertools.imap is not present.
42 * gdb.python/py-objfile.exp: Add parentheses.
43 * gdb.python/py-type.exp: Same.
44 * gdb.python/py-unwind-maint.py: Same.
46 2015-04-15 Yao Qi <yao.qi@linaro.org>
48 * gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead
49 of ":$ptr_size" and set its form explicitly.
51 2015-04-15 Pedro Alves <palves@redhat.com>
52 Yao Qi <yao.qi@linaro.org>
54 * gdb.base/watch-bitfields.exp (test_watch_location): Increase
55 timeout by factor of 4.
56 (test_regular_watch): Likewise.
57 * gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
58 * gdb.reverse/sigall-reverse.exp: Likewise.
59 * gdb.reverse/until-precsave.exp: Likewise.
60 * lib/gdb.exp (with_timeout_factor): New proc.
61 (gdb_expect): Move some code to ...
62 (get_largest_timeout): ... here. New procedure.
64 2015-04-14 Luis Machado <lgustavo@codesourcery.com>
66 * gdb.base/bp-permanent.exp (test): Reinstate correct test message.
68 2015-04-13 Luis Machado <lgustavo@codesourcery.com>
70 * gdb.base/bp-permanent.exp (test): Handle the case of being unable
71 to write to the .text section.
73 2015-04-13 Luis Machado <lgustavo@codesourcery.com>
75 * gdb.base/coredump-filter.exp: Restrict test to Linux systems only.
76 Handle the case of targets that do not provide PID information.
78 2015-04-13 Yao Qi <yao.qi@linaro.org>
80 * lib/gdbserver-support.exp (gdb_exit): Catch exception
81 and use expect instead of gdb_expect.
83 2015-04-13 Sergio Durigan Junior <sergiodj@redhat.com>
85 * gdb.base/coredump-filter.exp: Rename variable "addr" to
86 "coredump_var_addr" to avoid naming conflict with other testcases.
88 2015-04-10 Pedro Alves <palves@redhat.com>
90 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Use
91 gdb_test_sequence and gdb_assert.
93 2015-04-10 Pedro Alves <palves@redhat.com>
95 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Use
96 test messages that don't include the breakpoint address.
98 2015-04-10 Yao Qi <yao.qi@linaro.org>
100 * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): Return
101 false for some offset and width combinations which aren't
102 supported by linux kernel.
104 2015-04-10 Pedro Alves <palves@redhat.com>
106 * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): New
107 procedure, factored out from ...
108 (top level): ... here. Add "set displaced-stepping" testing axis.
109 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): New
110 parameter "displaced". Use it.
111 (top level): Use foreach and add "set displaced-stepping" testing
114 2015-04-10 Pedro Alves <palves@redhat.com>
116 * gdb.threads/step-over-trips-on-watchpoint.c (child_function):
118 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Find
119 both the address of the instruction that triggers the watchpoint
120 and the address of the instruction immediately after, and use
121 those addresses for the test. Fix comment.
123 2015-04-10 Pedro Alves <palves@redhat.com>
125 * gdb.base/sigstep.exp (breakpoint_to_handler)
126 (breakpoint_to_handler_entry): New parameter 'displaced'. Use it.
127 Test "backtrace" in handler.
128 (breakpoint_over_handler): New parameter 'displaced'. Use it.
129 (top level): Add new "displaced" test axis to
130 breakpoint_to_handler, breakpoint_to_handler_entry and
131 breakpoint_over_handler.
133 2015-04-10 Pedro Alves <palves@redhat.com>
136 * gdb.threads/multiple-step-overs.exp: Remove expected eof.
138 2015-04-10 Yao Qi <yao.qi@linaro.org>
140 * gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc.
141 (test_add_rn_pc): New function.
142 * gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc.
143 (top level): Invoke test_add_rn_pc.
145 2015-04-10 Pedro Alves <palves@redhat.com>
148 * gdb.base/step-over-no-symbols.exp: New file.
150 2015-04-09 Andy Wingo <wingo@igalia.com>
152 * gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled
153 after the Python tests.
155 2015-04-08 Keith Seitz <keiths@redhat.com>
158 * gdb.python/py-completion.exp: New tests for completion.
159 * gdb.python/py-completion.py (CompleteLimit1): New class.
160 (CompleteLimit2): Likewise.
161 (CompleteLimit3): Likewise.
162 (CompleteLimit4): Likewise.
163 (CompleteLimit5): Likewise.
164 (CompleteLimit6): Likewise.
165 (CompleteLimit7): Likewise.
167 2015-04-08 Pedro Alves <palves@redhat.com>
171 * gdb.threads/multiple-step-overs.c (sigusr1_handler): New
173 (main): Install it as SIGUSR1 handler.
174 * gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix'
175 parameter. Always use "setup" as prefix. Toggle "set
176 displaced-stepping" off/on depending on global. Don't switch to
178 (top level): Add displaced stepping "off/on" test axis. Update
179 "setup" calls. Wrap each subtest with with_test_prefix. Test
180 continuing with a queued signal in each thread.
182 2015-04-08 Pedro Alves <palves@redhat.com>
184 * gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd.
185 * gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd. Use
186 gdb_breakpoint instead of gdb_test that doesn't expect anything.
187 Return early if running to main fails.
188 * gdb.trace/while-stepping.exp: Likewise.
190 2015-04-07 Pedro Alves <palves@redhat.com>
192 * gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id !=
193 $gdb_spawn_id. Use send_inferior and $inferior_spawn_id to
194 interact with inferior program.
196 2015-04-07 Pedro Alves <palves@redhat.com>
198 * lib/gdb.exp (inferior_spawn_id): New global.
199 (gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's
200 spawn id after processing the user code.
201 (default_gdb_start): Set inferior_spawn_id.
202 (send_inferior): New procedure.
203 * lib/gdbserver-support.exp (gdbserver_start): Set
205 (close_gdbserver, gdb_exit): Unset inferior_spawn_id.
207 2015-04-07 Pedro Alves <palves@redhat.com>
209 * lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
210 * lib/gdbserver-support.exp (gdbserver_start): Make
211 $server_spawn_id global.
212 (gdbserver_start): Don't wait for gdbserver's spawn id with
214 (close_gdbserver): New procedure.
215 (gdb_exit): Rename the default version and reimplement.
217 2015-04-07 Pedro Alves <palves@redhat.com>
219 * lib/gdb.exp (gdb_test_multiple): When processing an argument,
220 append the substituted item, not the original item.
222 2015-04-07 Pedro Alves <palves@redhat.com>
224 * gdb.base/interrupt.exp: Use gdb_test_multiple instead of
227 2015-04-07 Pedro Alves <palves@redhat.com>
229 * gdb.base/interrupt.exp: Don't handle the case of the inferior
230 output appearing once only.
232 2015-04-07 Pedro Alves <palves@redhat.com>
234 * gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
235 that doesn't expect anything. Return early if running to main
238 2015-04-07 Yao Qi <yao.qi@linaro.org>
240 * gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
241 (child_function): Call alarm.
242 (main): Move call to alarm into the loop.
243 * gdb.threads/non-stop-fair-events.exp: Build program with
246 2015-04-06 Doug Evans <xdje42@gmail.com>
248 * lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
249 Fix dest parameter to board_info.
250 (fpc_compile): Ditto.
251 (gdb_compile_pascal): Rename dest arg to destfile.
253 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
255 * gdb.ada/funcall_ref.exp: New file.
256 * gdb.ada/funcall_ref/foo.adb: New file.
258 2015-04-02 Yao Qi <yao.qi@linaro.org>
260 * gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
263 2015-04-02 Gary Benson <gbenson@redhat.com>
265 * gdb.base/break-probes.exp: Cope with "target:" sysroot.
267 2015-04-01 Sasha Smundak <asmundak@google.com>
269 * gdb.python/py-unwind-maint.c: New file.
270 * gdb.python/py-unwind-maint.exp: New test.
271 * gdb.python/py-unwind-maint.py: New file.
272 * gdb.python/py-unwind.c: New file.
273 * gdb.python/py-unwind.exp: New test.
274 * gdb.python/py-unwind.py: New test.
276 2015-04-01 Pedro Alves <palves@redhat.com>
278 * gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
279 to fail instead of non-existent $test.
281 2015-04-01 Pedro Alves <palves@redhat.com>
283 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
284 GDBFLAGS if not empty.
286 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
288 * gdb.ada/complete.exp: Remove "multi_line".
289 * gdb.ada/info_exc.exp: Remove "multi_line".
290 * gdb.ada/packed_tagged.exp: Remove "multi_line".
291 * gdb.ada/ptype_field.exp: Remove "multi_line".
292 * gdb.ada/sym_print_name.exp: Remove "multi_line".
293 * gdb.ada/tagged.exp: Remove "multi_line".
294 * gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
296 * gdb.btrace/delta.exp: Likewise.
297 * gdb.btrace/exception.exp: Likewise.
298 * gdb.btrace/function_call_history.exp: Likewise.
299 * gdb.btrace/instruction_history.exp: Likewise.
300 * gdb.btrace/nohist.exp: Likewise.
301 * gdb.btrace/record_goto.exp: Likewise.
302 * gdb.btrace/segv.exp: Likewise.
303 * gdb.btrace/stepi.exp: Likewise.
304 * gdb.btrace/tailcall.exp: Likewise.
305 * gdb.btrace/unknown_functions.exp: Likewise.
306 * gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
307 * lib/gdb.exp: Add the "multi_line" helper.
309 2015-04-01 Pedro Alves <palves@redhat.com>
311 * gdb.threads/tid-reuse.c: New file.
312 * gdb.threads/tid-reuse.exp: New file.
314 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
317 * gdb.base/coredump-filter.c: New file.
318 * gdb.base/coredump-filter.exp: Likewise.
320 2015-03-27 Petr Machata <pmachata@redhat.com>
322 * lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset.
323 (Dwarf::_line_count, Dwarf::_line_saw_file): New variables.
324 (Dwarf::assemble): Initialize them.
325 (Dwarf::lines): New function.
327 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
329 * lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
330 SYMBOL_PREFIX for x86_64-*-cygwin.
332 2015-03-26 Andy Wingo <wingo@igalia.com>
335 * gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
336 const_value but not a location.
337 * gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
338 location defined in non-main CUs are visible.
340 2015-03-26 Yao Qi <yao.qi@linaro.org>
343 * gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
344 Add a line number entry for the same line.
345 * gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
346 Add a line number entry for the same line.
348 2015-03-26 Yao Qi <yao.qi@linaro.org>
350 * gdb.linespec/break-asm-file0.s (func2): Use nop instead of
352 (func): Likewise. Add .Lfunc_1 label.
354 * gdb.linespec/break-asm-file1.s (func3): Use nop instead of
359 2015-03-26 Yao Qi <yao.qi@linaro.org>
361 * gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
362 Call gdb_compile instead to compile each .s files without debug
365 2015-03-26 Yao Qi <yao.qi@linaro.org>
367 * gdb.base/savedregs.exp (process_saved_regs): Make
368 "Saved registers:" optional in the pattern.
370 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
372 * gdb.btrace/next.exp: Merged into step.exp.
373 * gdb.btrace/finish.exp: Merged into step.exp.
374 * gdb.btrace/nexti.exp: Merged into stepi.exp.
375 * gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using
376 "record goto" and checking the exact replay position.
377 * gdb.btrace/stepi.exp: Choose test file based on target. Do not
378 check for "Recording format" in "info record" output.
379 * gdb.btrace/record_goto.exp: Choose test file based on target.
380 * gdb.btrace/x86-record_goto.S: Renamed into ...
381 * gdb.btrace/x86_64-record_goto.S: ... this.
382 * gdb.btrace/i686-record_goto.S: New.
383 * gdb.btrace/x86-tailcall.S: Renamed into ...
384 * gdb.btrace/x86_64-tailcall.S: ... this.
385 * gdb.btrace/i686-tailcall.S: New.
386 * gdb.btrace/x86-tailcall.c: Renamed into ...
387 * gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two
388 separate statements. Update test.
389 * gdb.btrace/delta.exp: Use record_goto.c as test file.
390 * gdb.btrace/gcore.exp: Use record_goto.c as test file.
391 * gdb.btrace/nohist.exp: Use record_goto.c as test file.
392 * gdb.btrace/tailcall.exp: Choose test file based on target.
393 * gdb.btrace/Makefile.in: Remove next, finish, and nexti.
395 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
397 * gdb.btrace/exception.exp: Increase BTS buffer size.
399 2015-03-24 Pedro Alves <palves@redhat.com>
401 * gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".
403 2015-03-24 Pedro Alves <palves@redhat.com>
405 * gdb.threads/schedlock.exp (test_step): No longer expect that
406 "set scheduler-locking step" with "next" over a function call runs
409 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
411 * gdb.mi/mi-pending.exp: Fix output of breakpoint test.
413 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
416 * gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
417 * gdb.mi/mi-pending.c (thread_func): New function.
418 (int main): Add threading support required.
419 * gdb.mi/mi-pending.exp: Add tests for this issue.
420 * gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
421 (pendfunc2): Remove stdio dependency.
422 * gdb.mi/mi-pendshr2.c: New file.
424 2015-03-23 Keith Seitz <keiths@redhat.com>
426 * gdb.linespec/keywords.c: New file.
427 * gdb.linespec/keywords.exp: New file.
429 2015-03-23 Keith Seitz <keiths@redhat.com>
432 * gdb.dwarf2/staticvirtual.exp: New test.
434 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
436 * Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
437 * README: Remove HP-UX and gdb.hp.
439 * configure: Regenerate.
440 * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
441 gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
442 gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
443 gdb.hp/gdb.defects/Makefile.
444 * gdb.hp/Makefile.in: File deleted.
445 * gdb.hp/gdb.aCC/Makefile.in: File deleted.
446 * gdb.hp/gdb.aCC/optimize.c: File deleted.
447 * gdb.hp/gdb.aCC/optimize.exp: File deleted.
448 * gdb.hp/gdb.aCC/run.c: File deleted.
449 * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
450 * gdb.hp/gdb.base-hp/Makefile.in: File deleted.
451 * gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
452 * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
453 * gdb.hp/gdb.base-hp/dollar.c: File deleted.
454 * gdb.hp/gdb.base-hp/dollar.exp: File deleted.
455 * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
456 * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
457 * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
458 * gdb.hp/gdb.base-hp/pxdb.c: File deleted.
459 * gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
460 * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
461 * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
462 * gdb.hp/gdb.base-hp/reg.exp: File deleted.
463 * gdb.hp/gdb.base-hp/reg.s: File deleted.
464 * gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
465 * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
466 * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
467 * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
468 * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
469 * gdb.hp/gdb.compat/Makefile.in: File deleted.
470 * gdb.hp/gdb.compat/average.c: File deleted.
471 * gdb.hp/gdb.compat/sum.c: File deleted.
472 * gdb.hp/gdb.compat/xdb.c: File deleted.
473 * gdb.hp/gdb.compat/xdb0.c: File deleted.
474 * gdb.hp/gdb.compat/xdb0.h: File deleted.
475 * gdb.hp/gdb.compat/xdb1.c: File deleted.
476 * gdb.hp/gdb.compat/xdb1.exp: File deleted.
477 * gdb.hp/gdb.compat/xdb2.exp: File deleted.
478 * gdb.hp/gdb.compat/xdb3.exp: File deleted.
479 * gdb.hp/gdb.defects/Makefile.in: File deleted.
480 * gdb.hp/gdb.defects/bs14602.c: File deleted.
481 * gdb.hp/gdb.defects/bs14602.exp: File deleted.
482 * gdb.hp/gdb.defects/solib-d.c: File deleted.
483 * gdb.hp/gdb.defects/solib-d.exp: File deleted.
484 * gdb.hp/gdb.defects/solib-d1.c: File deleted.
485 * gdb.hp/gdb.defects/solib-d2.c: File deleted.
486 * gdb.hp/gdb.objdbg/Makefile.in: File deleted.
487 * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
488 * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
489 * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
490 * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
491 * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
492 * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
493 * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
494 * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
495 * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
496 * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
497 * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
498 * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
499 * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
500 * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
501 * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
502 * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
503 * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
504 * gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
505 * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
506 * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
507 * gdb.hp/tools/odump: File deleted.
509 2015-03-19 Pedro Alves <palves@redhat.com>
511 * gdb.threads/continue-pending-status.exp (saw_thread_2)
512 (saw_thread_3): New globals.
513 (top level): Increment them when an event for the corresponding
515 (no thread starvation): New test.
517 2015-03-19 Pedro Alves <palves@redhat.com>
519 * gdb.threads/continue-pending-status.c: New file.
520 * gdb.threads/continue-pending-status.exp: New file.
522 2015-03-18 Pedro Alves <palves@redhat.com>
524 * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
525 Use gdb_is_target_remote instead of is_remote. Use
526 gdb_test_multiple instead of gdb_expect. Exit early if
527 gdb_test_multiple hits its internal matches. Tighten stepi tests
528 expected output. Fail on exit with any signal, instead of just
531 2015-03-18 Yao Qi <yao.qi@linaro.org>
534 * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
536 * gdb.base/catch-syscall.exp: Don't skip it on
537 aarch64*-*-linux* target. Remove elements in all_syscalls.
538 (test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
540 (setup_all_syscalls): New proc.
542 2015-03-16 Yao Qi <yao.qi@linaro.org>
544 * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
545 (top level): Skip tests if valid_addr_p returns false for
548 2015-03-11 Andy Wingo <wingo@igalia.com>
550 * gdb.guile/scm-objfile.exp: Add objfile-progspace test.
552 2015-03-11 Yao Qi <yao.qi@linaro.org>
554 * gdb.base/catch-syscall.exp: Fix typo in comments.
556 2015-03-11 Yao Qi <yao.qi@linaro.org>
558 * gdb.base/catch-syscall.exp: Skip it on HP-UX target.
560 2015-03-09 Pedro Alves <palves@redhat.com>
562 * dg-extract-results.py: Delete.
564 2015-03-09 Pedro Alves <palves@redhat.com>
566 Merge dg-extract-results.sh from GCC upstream (r218843).
568 2014-12-17 Sergio Durigan Junior <sergiodj@redhat.com>
569 * dg-extract-results.sh: Use --text with grep to avoid issues with
570 binary files. Fall back to cat -v, if that doesn't work.
572 2015-03-05 Pedro Alves <palves@redhat.com>
574 * gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
576 2015-03-04 Simon Marchi <simon.marchi@ericsson.com>
578 * lib/mi-support.exp (mi_expect_interrupt): Accept
579 alternative event for when in all-stop mode.
581 2015-03-04 Pedro Alves <palves@redhat.com>
583 * gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
585 2015-03-04 Mark Kettenis <kettenis@gnu.org>
587 * gdb.base/foll-fork.exp: Enable on *-*-openbsd*.
589 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
591 * gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
592 regexps for GDB's current line display, accept a hex address
593 preceding the line number.
595 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
597 * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
598 the 'arch1' variable for "s390*-linux*" targets.
600 2015-03-04 Pedro Alves <palves@redhat.com>
602 * gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
603 (main): Pass missing retval argument to pthread_join call.
605 2015-03-02 Pedro Alves <palves@redhat.com>
607 * gdb.threads/thread-execl.exp (do_test): Handle non-stop.
608 (top level): Call do_test with non-stop as well.
610 2015-03-02 Pedro Alves <palves@redhat.com>
612 * lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
615 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
617 * gdb.arch/s390-vregs.exp: New test.
618 * gdb.arch/s390-vregs.S: New file.
620 2015-02-27 Pedro Alves <palves@redhat.com>
622 * gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
623 call to catch_command_errors.
624 * gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
625 catch_command_errors.
627 2015-02-27 Pedro Alves <palves@redhat.com>
629 * gdb.gdb/complaints.exp (test_initial_complaints): Also accept
630 "true" for boolean result.
631 * gdb.gdb/selftest.exp (test_with_self): Also accept full
634 2015-02-27 Pedro Alves <palves@redhat.com>
636 * lib/unbuffer_output.c: New file.
637 * gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
638 (main): Call gdb_unbuffer_output.
640 2015-02-27 Yao Qi <yao.qi@linaro.org>
642 * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
645 2015-02-26 Doug Evans <dje@google.com>
647 * gdb.cp/class2.cc (Dbase, D): New classes.
648 (main): New local delta.
649 * gdb.cp/class2.exp: Test printing delta.
650 * gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes.
651 (dynbar): New global.
652 * gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar.
654 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
656 * gdb.compile/compile-ifunc.c: New file.
657 * gdb.compile/compile-ifunc.exp: New file.
659 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
661 * gdb.base/structs.exp: Check for correct struct on finish.
663 2015-02-26 Yao Qi <yao.qi@linaro.org>
665 * lib/dwarf.exp (function_range): Adjust pattern when $func_length
668 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
670 * gdb.arch/cordic.ko.bz2: New file.
671 * gdb.arch/cordic.ko.debug.bz2: New file.
672 * gdb.arch/ppc64-symtab-cordic.exp: New file.
674 2015-02-25 Yao Qi <yao.qi@linaro.org>
676 * gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
679 2015-02-23 Pedro Alves <palves@redhat.com>
681 * lib/gdb.exp (delete_breakpoints): Rewrite using
684 2015-02-23 Pedro Alves <palves@redhat.com>
686 * gdb.base/info-os.c: Include stdlib.h.
688 2015-02-22 Doug Evans <xdje42@gmail.com>
691 * gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
692 is read after symbols have been re-read.
693 * gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
694 * gdb.ada/exec_changed/second.adb (Second): Ditto.
696 2015-02-21 Doug Evans <dje@google.com>
698 * gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.
700 2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
703 * gdb.arch/i386-biarch-core.core.bz2: New file.
704 * gdb.arch/i386-biarch-core.exp: New file.
706 2015-02-21 Pedro Alves <palves@redhat.com>
708 * gdb.threads/multi-create-ns-info-thr.exp: Return early if
711 2015-02-20 Pedro Alves <palves@redhat.com>
713 * gdb.base/solib-corrupted.exp: Expect "stap" as first column of
716 2015-02-20 Pedro Alves <palves@redhat.com>
718 * gdb.threads/multi-create-ns-info-thr.exp: New file.
720 2015-02-20 Pedro Alves <palves@redhat.com>
722 * gdb.trace/no-attach-trace.exp: Don't run to main. Do
723 clean_restart before gdb_target_supports_trace.
725 2015-02-20 Pedro Alves <palves@redhat.com>
728 * gdb.threads/clone-thread_db.c: New file.
729 * gdb.threads/clone-thread_db.exp: New file.
731 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
734 * gdb.base/catch-gdb-caused-signals.c: New file.
735 * gdb.base/catch-gdb-caused-signals.exp: New file.
737 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
739 * configure: Regenerated.
740 * configure.ac: Use GDB_AC_TRANSFORM.
741 * aclocal.m4: sinclude ../transform.m4.
743 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
745 * lib/dtrace.exp: New file.
746 * gdb.base/dtrace-probe.exp: Likewise.
747 * gdb.base/dtrace-probe.d: Likewise.
748 * gdb.base/dtrace-probe.c: Likewise.
749 * lib/pdtrace.in: Likewise.
750 * configure.ac: Output variables with the transformed names of
751 the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
752 * configure: Regenerated.
754 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
756 * gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
757 expected message when trying to access $_probe_* convenience
758 variables while not on a probe.
760 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
762 * gdb.python/py-framefilter.exp (pagination quit - *): New tests.
764 2015-02-11 Pedro Alves <pedro@codesourcery.com>
766 * gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
767 * gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
769 2015-02-10 Doug Evans <xdje42@gmail.com>
771 * lib/gdb.exp (gdb_load): Always return a result.
773 2015-02-10 Pedro Alves <palves@redhat.com>
775 * gdb.threads/signal-sigtrap.c: New file.
776 * gdb.threads/signal-sigtrap.exp: New file.
778 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
780 * gdb.trace/no-attach-trace.c: New file.
781 * gdb.trace/no-attach-trace.exp: New file.
783 2015-02-09 Mark Wielaard <mjw@redhat.com>
785 * gdb.dwarf2/atomic.c: New file.
786 * gdb.dwarf2/atomic-type.exp: Likewise.
788 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
790 * gdb.btrace/buffer-size.exp: Update "info record" output.
791 * gdb.btrace/delta.exp: Update "info record" output.
792 * gdb.btrace/enable.exp: Update "info record" output.
793 * gdb.btrace/finish.exp: Update "info record" output.
794 * gdb.btrace/instruction_history.exp: Update "info record" output.
795 * gdb.btrace/next.exp: Update "info record" output.
796 * gdb.btrace/nexti.exp: Update "info record" output.
797 * gdb.btrace/step.exp: Update "info record" output.
798 * gdb.btrace/stepi.exp: Update "info record" output.
799 * gdb.btrace/nohist.exp: Update "info record" output.
801 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
803 * gdb.btrace/buffer-size: New.
805 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
807 * gdb.btrace/delta.exp: Update "info record" output.
808 * gdb.btrace/enable.exp: Update "info record" output.
809 * gdb.btrace/finish.exp: Update "info record" output.
810 * gdb.btrace/instruction_history.exp: Update "info record" output.
811 * gdb.btrace/next.exp: Update "info record" output.
812 * gdb.btrace/nexti.exp: Update "info record" output.
813 * gdb.btrace/step.exp: Update "info record" output.
814 * gdb.btrace/stepi.exp: Update "info record" output.
815 * gdb.btrace/nohist.exp: Update "info record" output.
817 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
820 * gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
822 2015-02-06 Pedro Alves <palves@redhat.com>
824 * gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
826 (seconds_left, again): New globals.
827 (main): Wait seconds_left in a 1-second sleep loop instead of
828 sleeping 180 seconds. If 'again' is set, reset the seconds
830 * gdb.threads/attach-many-short-lived-threads.exp (test): Set
831 'again' in the inferior before detaching. Print the seconds left.
832 (options): New global.
833 (top level): Build program with -DTIMEOUT=$timeout.
835 2015-02-06 Pedro Alves <palves@redhat.com>
837 * gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
838 determine how many seconds to pass to 'alarm'.
839 * gdb.base/gdb-sigterm.exp (top level): Build program with
841 (do_test): Return success/failure indication. Add more verbose
842 logging. Don't fail if 200 single steps are seen. Instead, fail
843 when the test times out.
844 (passes): New global.
845 (top level): Break the testing loop if testing fails on any
846 iteration. Use gdb_assert.
848 2015-02-04 Don Breazeal <donb@codesourcery.com>
850 * gdb.base/info-os.c (shmid, semid, msqid): Make variables static
852 (ipc_cleanup): New function.
853 (main): Don't declare shmid, semid, and msqid. Add a call to
854 atexit so that we call ipc_cleanup on exit.
856 2015-02-04 Pedro Alves <palves@redhat.com>
858 * boards/native-extended-gdbserver.exp: Remove any target variant
859 specifications from the board name before clearing the isremote
860 flag from board_info.
862 2015-01-31 Doug Evans <xdje42@gmail.com>
864 * gdb.base/maint.exp <maint print type argc>: Update expected output.
866 2015-01-31 Gary Benson <gbenson@redhat.com>
868 * gdb.base/completion.exp: Disable completion limiting for
869 existing tests. Add new tests to check completion limiting.
870 * gdb.linespec/ls-errs.exp: Disable completion limiting.
872 2015-01-31 Doug Evans <xdje42@gmail.com>
874 * gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12.
876 2015-01-31 Doug Evans <xdje42@gmail.com>
878 * gdb.guile/scm-section-script.c: Add duplicate inlined section script
879 entries. Duplicate file section script entries.
880 * gdb.guile/scm-section-script.exp: Add tests for duplicate entries,
881 inlined entries. Add test for safe-path rejection.
882 * gdb.python/py-section-script.c: Add duplicate inlined section script
883 entries. Duplicate file section script entries.
884 * gdb.python/py-section-script.exp: Add tests for duplicate entries,
885 inlined entries. Add test for safe-path rejection.
887 2015-01-29 Joel Brobecker <brobecker@adacore.com>
889 * gdb.ada/disc_arr_bound: New testcase.
891 2015-01-29 Joel Brobecker <brobecker@adacore.com>
893 * gdb.ada/mi_var_array: New testcase.
895 2015-01-27 Doug Evans <dje@google.com>
897 * gdb.python/py-objfile.exp: Add tests for objfile.username.
898 Add test for objfile.filename, objfile.username after objfile
901 2015-01-26 Joel Brobecker <brobecker@adacore.com>
903 * gdb.python/py-lookup-type.exp (test_lookup_type): Change
904 the second test to print the name attribute of value
905 returned by the call to gdb.lookup_type, and adjust
906 the expected output accordingly.
908 2015-01-25 Mark Wielaard <mjw@redhat.com>
910 * gdb.arch/i386-bp_permanent.c (standard): New declaration.
911 * gdb.base/disp-step-fork.c: Include unistd.h.
912 * gdb.base/siginfo-obj.c: Include stdio.h.
913 * gdb.base/siginfo-thread.c: Likewise.
914 * gdb.mi/non-stop.c: Include unistd.h.
915 * gdb.mi/nsthrexec.c: Include stdio.h.
916 * gdb.mi/pthreads.c: Include unistd.h.
917 * gdb.modula2/unbounded1.c (main): Declare returns int.
918 * gdb.reverse/consecutive-reverse.c: Likewise.
919 * gdb.threads/create-fail.c: Include unistd.h.
920 * gdb.threads/killed.c: Likewise.
921 * gdb.threads/linux-dp.c: Likewise.
922 * gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
923 * gdb.threads/non-ldr-exc-2.c: Likewise.
924 * gdb.threads/non-ldr-exc-3.c: Likewise.
925 * gdb.threads/non-ldr-exc-4.c: Likewise.
926 * gdb.threads/pthreads.c: Include unistd.h.
927 (main): Declare returns int.
928 * gdb.threads/tls-main.c (foo): New declaration.
929 * gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
931 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
933 * gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
934 * gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
936 2015-01-15 Mark Wielaard <mjw@redhat.com>
938 * gdb.base/noreturn-return.c: New file.
939 * gdb.base/noreturn-return.exp: New file.
940 * gdb.base/noreturn-finish.c: New file.
941 * gdb.base/noreturn-finish.exp: New file.
943 2015-01-23 Pedro Alves <palves@redhat.com>
945 * gdb.threads/continue-pending-after-query.c: New file.
946 * gdb.threads/continue-pending-after-query.exp: New file.
948 2015-01-22 Anders Granlund <anders.granlund@ericsson.com>
949 Simon Marchi <simon.marchi@ericsson.com>
951 * gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
952 * gdb.base/valgrind-db-attach.exp: Same.
953 * gdb.base/valgrind-infcall.exp: Same.
954 * lib/mi-support.exp (default_mi_gdb_start): Same.
955 * lib/prompt.exp (default_prompt_gdb_start): Same.
956 * lib/gdb.exp (default_gdb_spawn): Same.
960 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
962 * gdb.compile/compile.exp (pointer to jit function): New test.
964 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
966 * lib/gdb.exp (supports_process_record): Return true for
968 (supports_reverse): Likewise.
970 2015-01-15 Don Breazeal <donb@codesourcery.com>
972 * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
973 instead of checking whether the target board is remote and
974 use spawn_wait_for_attach instead of exec/sleep.
975 * gdb.base/attach-twice.exp: Likewise.
977 2015-01-15 Joel Brobecker <brobecker@adacore.com>
979 * gdb.ada/var_arr_attrs: New testcase.
981 2015-01-14 Pedro Alves <palves@redhat.com>
982 Joel Brobecker <brobecker@adacore.com>
985 * gdb.base/bp-cmds-execution-x-script.c: New file.
986 * gdb.base/bp-cmds-execution-x-script.exp: New file.
987 * gdb.base/bp-cmds-execution-x-script.gdb: New file.
989 2015-01-14 Pedro Alves <palves@redhat.com>
992 * gdb.base/batch-preserve-term-settings.c: New file.
993 * gdb.base/batch-preserve-term-settings.exp: New file.
995 2015-01-13 Doug Evans <dje@google.com>
997 * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
1000 2015-01-13 Joel Brobecker <brobecker@adacore.com>
1002 * Makefile.in (clean mostlyclean): Do not delete *.py.
1004 2015-01-13 Joel Brobecker <brobecker@adacore.com>
1006 * gdb.python/py-lookup-type.exp: New file.
1008 2015-01-12 Pedro Alves <palves@redhat.com>
1010 * gdb.python/py-prompt.exp: When the board can't spawn for attach,
1011 restore GDBFLAGS before returning.
1013 2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1015 * gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
1016 is_amd64_regs_target and is_x86_like_target.
1018 2015-01-11 Doug Evans <xdje42@gmail.com>
1020 * lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
1021 is given without an explicit form.
1022 * gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
1024 * gdb.dwarf/corrupt.exp: Ditto.
1025 * gdb.dwarf2/enum-type.exp: Ditto.
1026 * gdb.trace/entry-values.exp: Ditto.
1027 * gdb.trace/unavailable-dwarf-piece.exp: Ditto.
1029 2015-01-11 Doug Evans <xdje42@gmail.com>
1032 * gdb.base/maint.exp: Remove references to "maint demangle".
1033 * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
1034 Add tests for explicitly specifying language to demangle.
1035 * gdb.dlang/demangle.exp: Ditto.
1037 2015-01-09 Pedro Alves <palves@redhat.com>
1039 * gdb.threads/non-stop-fair-events.c: New file.
1040 * gdb.threads/non-stop-fair-events.exp: New file.
1042 2015-01-09 Pedro Alves <palves@redhat.com>
1044 * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
1045 the global scope. Set a breakpoint after all threads are started
1046 rather than stepping over two source lines. Expect the prompt.
1047 * gdb.base/watch_thread_num.c (threads_started_barrier): New
1050 (main): Use threads_started_barrier to wait for all threads to
1051 start. Main thread no longer calls thread_function. Exit after
1053 (loop): New function.
1054 (thread_function): Wait on threads_started_barrier barrier. Call
1055 'loop' at each iteration.
1056 * gdb.base/watch_thread_num.exp: Continue to breakpoint after all
1057 threads have started, instead of hardcoding number of "next"
1058 steps. Use an access watchpoint instead of a write watchpoint.
1060 2015-01-09 Pedro Alves <palves@redhat.com>
1062 * gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
1063 (thread_func): Wait on barrier.
1064 (main): Wait for all threads to start before stopping GDB.
1065 * gdb.threads/siginfo-threads.c (threads_started_barrier): New
1067 (thread1_func, thread2_func): Wait on barrier.
1068 (main): Wait for all threads to start before stopping GDB.
1069 * gdb.threads/watchthreads-reorder.c (threads_started_barrier):
1071 (thread1_func, thread2_func): Wait on barrier.
1072 (main): Wait for all threads to start before stopping GDB.
1074 2015-01-09 Pedro Alves <palves@redhat.com>
1076 * gdb.threads/attach-many-short-lived-threads.c: New file.
1077 * gdb.threads/attach-many-short-lived-threads.exp: New file.
1079 2014-01-09 Pedro Alves <palves@redhat.com>
1081 * gdb.threads/fork-thread-pending.exp: Switch to the main thread
1082 instead of to thread 2.
1083 * gdb.threads/signal-command-multiple-signals-pending.c (main):
1084 Add barrier around each pthread_create call instead of around all
1086 * gdb.threads/signal-command-multiple-signals-pending.exp (test):
1087 Set a break on thread_function and have the child threads hit it
1090 2015-01-09 Pedro Alves <palves@redhat.com>
1092 * lib/gdb.exp (can_spawn_for_attach): New procedure.
1093 (spawn_wait_for_attach): Error out if can_spawn_for_attach returns
1095 * gdb.base/attach.exp: Use can_spawn_for_attach instead of
1096 checking whether the target board is remote.
1097 * gdb.multi/multi-attach.exp: Likewise.
1098 * gdb.python/py-sync-interp.exp: Likewise.
1099 * gdb.server/ext-attach.exp: Likewise.
1100 * gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
1101 tests that need to attach, instead of checking whether the target
1102 board is remote at the top of the file.
1104 2015-01-08 Yao Qi <yao@codesourcery.com>
1106 * gdb.trace/entry-values.exp: Set call_insn for MIPS target.
1108 2015-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1110 Fix testcase compilation.
1111 * gdb.arch/i386-avx512.exp (comp_flags): Remove /common.
1113 2015-01-06 Joel Brobecker <brobecker@adacore.com>
1115 * gdb.python/py-type.exp: Add a couple test about empty
1116 array creation, and negative-length array creation.
1118 2015-01-02 Doug Evans <xdje42@gmail.com>
1120 * gdb.cp/nsalias.exp: Fix output of external/declaration flags.
1122 2015-01-02 Doug Evans <dje@google.com>
1124 * gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc.
1126 2014-12-29 Yao Qi <yao@codesourcery.com>
1128 * gdb.trace/entry-values.exp: Update comments. Rename variable
1129 bar_call_foo to returned_from_foo.
1131 2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
1134 * gdb.linespec/break-asm-file.c: New file.
1135 * gdb.linespec/break-asm-file.exp: New file.
1136 * gdb.linespec/break-asm-file0.s: New file.
1137 * gdb.linespec/break-asm-file1.s: New file.
1139 2014-12-18 Nigel Stephens <nigel@mips.com>
1140 Maciej W. Rozycki <macro@codesourcery.com>
1142 * gdb.base/float.exp: Handle the new output from "info float" on
1145 2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1147 Fix MinGW compilation.
1148 * gdb.compile/compile-ops.exp: Update untested message if
1149 !skip_compile_feature_tests.
1150 * gdb.compile/compile-setjmp.exp: Likewise.
1151 * gdb.compile/compile-tls.exp: Likewise.
1152 * gdb.compile/compile.exp: Likewise.
1153 * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
1154 supported on this host".
1156 2014-12-16 Doug Evans <xdje42@gmail.com>
1158 * boards/stabs.exp: New file.
1160 2014-12-16 Andreas Arnez <arnez@vnet.linux.ibm.com>
1162 * gdb.base/completion.exp: Adjust to format changes of "maint
1163 print user-registers".
1165 2014-12-16 Catalin Udma <catalin.udma@freescale.com>
1168 * gdb.arch/aarch64-fp.c: New file.
1169 * gdb.arch/aarch64-fp.exp: New file.
1171 2014-12-15 Sergio Durigan Junior <sergiodj@redhat.com>
1173 Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
1174 r210637, r210913, r211666, r215400, r215817).
1176 2014-05-08 Richard Sandiford <rdsandiford@googlemail.com>
1177 * dg-extract-results.py: New file.
1178 * dg-extract-results.sh: Use it if the environment seems
1181 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
1183 * dg-extract-results.py (parse_run): Handle warnings that
1184 are printed before a test harness is run.
1186 2014-05-25 Richard Sandiford <rdsandiford@googlemail.com>
1188 * dg-extract-results.py (Named): Remove __cmp__ method.
1189 (output_variation): Use a key to sort variation.harnesses.
1191 2014-06-14 Richard Sandiford <rdsandiford@googlemail.com>
1193 * dg-extract-results.py: For Python 3, force sys.stdout to
1194 handle surrogate escape sequences.
1195 (safe_open): New function.
1196 (output_segment, main): Use it.
1198 2014-09-19 Segher Boessenkool <segher@kernel.crashing.org>
1200 * dg-extract-results.py (Prog.result_re): Include options
1203 2014-10-02 Segher Boessenkool <segher@kernel.crashing.org>
1205 * dg-extract-results.py (output_variation): Always sort if
1208 2014-12-15 Simon Marchi <simon.marchi@ericsson.com>
1210 * lib/gdb.exp (default_gdb_start): After starting gdb, loop
1211 as long as we get pagination notifications.
1213 2014-12-15 Jason Merrill <jason@redhat.com>
1215 * Makefile.in (check-gdb.%): Restore.
1216 * README: Mention it.
1218 2014-12-13 Joel Brobecker <brobecker@adacore.com>
1220 * gdb.ada/str_uninit: New testcase.
1222 2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1225 * gdb.base/vla-stub-define.c: New file.
1226 * gdb.base/vla-stub.c: New file.
1227 * gdb.base/vla-stub.exp: New file.
1229 2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
1230 Jan Kratochvil <jan.kratochvil@redhat.com>
1231 Tom Tromey <tromey@redhat.com>
1233 * configure.ac: Add gdb.compile/.
1234 * configure: Regenerate.
1235 * gdb.compile/Makefile.in: New file.
1236 * gdb.compile/compile-ops.exp: New file.
1237 * gdb.compile/compile-ops.c: New file.
1238 * gdb.compile/compile-tls.c: New file.
1239 * gdb.compile/compile-tls.exp: New file.
1240 * gdb.compile/compile-constvar.S: New file.
1241 * gdb.compile/compile-constvar.c: New file.
1242 * gdb.compile/compile-mod.c: New file.
1243 * gdb.compile/compile-nodebug.c: New file.
1244 * gdb.compile/compile-setjmp-mod.c: New file.
1245 * gdb.compile/compile-setjmp.c: New file.
1246 * gdb.compile/compile-setjmp.exp: New file.
1247 * gdb.compile/compile-shlib.c: New file.
1248 * gdb.compile/compile.c: New file.
1249 * gdb.compile/compile.exp: New file.
1250 * lib/gdb.exp (skip_compile_feature_tests): New proc.
1252 2014-12-12 Tom Tromey <tromey@redhat.com>
1254 * lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
1255 Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
1257 2014-12-12 Doug Evans <dje@google.com>
1259 * lib/gdb-python.exp (get_python_valueof): New function.
1260 * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.
1262 2014-12-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
1264 * gdb.base/completion.exp: Add test for completion of "info
1267 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
1269 * gdb.base/func-ptrs.c: New file.
1270 * gdb.base/func-ptrs.exp: New file.
1272 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1274 PR breakpoints/17012
1275 * gdb.base/dprintf-detach.c: New file.
1276 * gdb.base/dprintf-detach.exp: New file.
1278 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1280 * gdb.trace/qtro.exp: Replace gdbserver detection code by...
1281 * lib/gdb.exp (target_is_gdbserver): New procedure.
1283 2014-12-08 Doug Evans <dje@google.com>
1285 * gdb.python/py-objfile.exp: Add tests for objfile.owner.
1287 2014-12-05 Yao Qi <yao@codesourcery.com>
1289 * gdb.guile/scm-error.exp: Remove the third argument to
1290 gdb_remote_download.
1291 * gdb.guile/scm-frame-args.exp: Likewise.
1292 * gdb.guile/scm-section-script.exp: Likewise.
1294 2014-12-05 Yao Qi <yao@codesourcery.com>
1296 * gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
1298 2014-12-04 Doug Evans <dje@google.com>
1300 * gdb.python/py-objfile.exp: Add tests for
1301 objfile.add_separate_debug_file.
1303 2014-12-04 Doug Evans <dje@google.com>
1305 * lib/gdb.exp (get_build_id): New function.
1306 (build_id_debug_filename_get): Rewrite to use it.
1307 * gdb.python/py-objfile.exp: Add test for objfile.build_id.
1309 2014-12-04 Maciej W. Rozycki <macro@codesourcery.com>
1311 * gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
1312 `method(long)', not just 0x0.
1313 * gdb.cp/nsalias.exp: Align code labels to 4.
1314 * gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
1315 * gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
1316 * gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
1317 * gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
1318 (cu_text_start, FUNC_lang_start): Use `START_INSNS'.
1319 * gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.
1321 2014-12-02 Doug Evans <dje@google.com>
1324 * gdb.cp/anon-ns.cc: Move guts of this file to ...
1325 * gdb.cp/anon-ns2.cc: ... here. New file.
1326 * gdb.cp/anon-ns.exp: Update.
1328 2014-12-02 Nick Bull <nicholaspbull@gmail.com>
1330 * gdb.python/py-events.py (inferior_call_handler): New.
1331 (register_changed_handler, memory_changed_handler): New.
1332 (test_events.invoke): Register new handlers.
1333 * gdb.python/py-events.exp: Add tests for inferior call,
1334 memory_changed and register_changed events.
1336 2014-12-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1338 * gdb.base/execl-update-breakpoints.exp: Specify the link address
1339 with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
1340 if the linker doesn't understand this.
1342 2014-12-01 Simon Marchi <simon.marchi@ericsson.com>
1344 * gdb.python/python.exp: Change expected reply to help().
1346 2014-12-01 Yao Qi <yao@codesourcery.com>
1348 * configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
1349 AC_CONFIG_SUBDIRS(gdb.gdbtk).
1350 * configure: Re-generated.
1352 2014-11-28 Siva Chandra Reddy <sivachandra@google.com>
1354 * gdb.cp/chained-calls.cc: New file.
1355 * gdb.cp/chained-calls.exp: New file.
1356 * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
1358 2014-11-28 Simon Marchi <simon.marchi@ericsson.com>
1360 * gdb.ada/py_range.exp: Add parentheses to python calls to print.
1361 * gdb.dwarf2/symtab-producer.exp: Same.
1362 * gdb.gdb/python-interrupts.exp: Same.
1363 * gdb.gdb/python-selftest.exp: Same.
1364 * gdb.python/py-linetable.exp: Same.
1365 * gdb.python/py-type.exp: Same.
1366 * gdb.python/py-value-cc.exp: Same.
1367 * gdb.python/py-value.exp: Same.
1369 2014-11-28 Yao Qi <yao@codesourcery.com>
1371 * gdb.base/break-probes.exp: Match library name prefixed with
1374 2014-11-27 Simon Marchi <simon.marchi@ericsson.com>
1376 * gdb.python/py-linetable.exp: Escape properly sorted(fset)
1377 test expected output. Add parentheses for the call to print.
1378 Remove L suffix from integers.
1380 2014-11-26 Doug Evans <dje@google.com>
1382 * gdb.dwarf2/dw2-op-out-param.S: Fix comment.
1384 2014-11-22 Yao Qi <yao@codesourcery.com>
1386 * gdb.trace/entry-values.c: Remove asms.
1387 (foo): Add foo_label.
1388 (bar): Add bar_label.
1389 * gdb.trace/entry-values.exp: Remove code computing foo's
1390 length and bar's length.
1391 (Dwarf::assemble): Invoke function_range for bar and use
1392 MACRO_AT_func for foo.
1394 2014-11-22 Yao Qi <yao@codesourcery.com>
1396 * gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
1397 and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
1398 Use .Lgcc43_procstart instead of gcc43.
1400 2014-11-21 Joel Brobecker <brobecker@adacore.com>
1402 * gdb.ada/n_arr_bound: New testcase.
1404 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
1406 PR breakpoints/10737
1407 * gdb.base/catch-syscall.exp (do_syscall_tests): Call
1408 test_catch_syscall_multi_arch.
1409 (test_catch_syscall_multi_arch): New function.
1411 2014-11-20 Doug Evans <xdje42@gmail.com>
1413 * gdb.base/maint.exp: Update expected output.
1415 2014-11-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
1417 * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
1418 4-byte instruction on S390.
1420 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1422 * gdb.ada/arr_arr: New testcase.
1424 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1426 * gdb.ada/pkd_arr_elem: New Testcase.
1428 2014-11-18 Luis Machado <lgustavo@codesourcery.com>
1430 * gdb.reverse/break-precsave: Expect completion message for
1432 * gdb.reverse/consecutive-precsave.exp: Likewise.
1433 * gdb.reverse/finish-precsave.exp: Likewise.
1434 * gdb.reverse/i386-precsave.exp: Likewise.
1435 * gdb.reverse/machinestate-precsave.exp: Likewise.
1436 * gdb.reverse/sigall-precsave.exp: Likewise.
1437 * gdb.reverse/solib-precsave.exp: Likewise.
1438 * gdb.reverse/step-precsave.exp: Likewise.
1439 * gdb.reverse/until-precsave.exp: Likewise.
1440 * gdb.reverse/watch-precsave.exp: Likewise.
1442 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1444 * gdb.base/bp-permanent.c: Include unistd.h.
1445 * gdb.python/py-framefilter-mi.c (main): Add return type.
1446 * gdb.python/py-framefilter.c (main): Likewise.
1447 * gdb.trace/actions-changed.c (main): Likewise.
1449 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1451 * gdb.mi/until.c: Add eye-catchers.
1452 * gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
1455 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1457 * gdb.base/condbreak.exp: Drop references to removed non-prototype
1458 function header variants in break1.c.
1459 * gdb.base/ena-dis-br.exp: Likewise.
1460 * gdb.base/hbreak2.exp: Likewise.
1461 * gdb.reverse/until-precsave.exp: Drop references to removed
1462 non-prototype function header variants in ur1.c.
1463 * gdb.reverse/until-reverse.exp: Likewise.
1465 2014-11-17 Petr Machata <pmachata@redhat.com>
1467 * lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
1468 ${_cu_offset_size} bytes abbrev offset.
1470 2014-11-15 Doug Evans <xdje42@gmail.com>
1473 * gdb.base/line-symtabs.exp: New file.
1474 * gdb.base/line-symtabs.c: New file.
1475 * gdb.base/line-symtabs.h: New file.
1477 2014-11-14 Yao Qi <yao@codesourcery.com>
1479 * gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
1480 (func): Add label func_label.
1481 * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
1482 Replace low_pc and high_pc with MACRO_AT_range.
1483 Replace name, low_pc and high_pc with MACRO_AT_func.
1485 2014-11-14 Yao Qi <yao@codesourcery.com>
1487 * gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
1488 Replace name, low_pc and high_pc with MACRO_AT_func.
1490 2014-11-14 Yao Qi <yao@codesourcery.com>
1492 * gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
1493 produce debug information.
1494 * gdb.dwarf2/implptr-optimized-out.S: Removed.
1496 2014-11-14 Yao Qi <yao@codesourcery.com>
1498 * gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
1499 object and get function length.
1500 (Dwarf::assemble): Replace name, low_pc and high_pc attributes
1502 (top-level): Replace gdb_compile and clean_restart with
1503 prepare_for_testing.
1504 * gdb.dwarf2/main.c (main): Add label main_label.
1506 2014-11-14 Yao Qi <yao@codesourcery.com>
1508 * lib/dwarf.exp (function_range): New procedure.
1509 (Dwarf::_handle_macro_at_func): New procedure.
1510 (Dwarf::_handle_macro_at_range): New procedure.
1511 (Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
1513 2014-11-14 Yao Qi <yao@codesourcery.com>
1515 * lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
1516 (_handle_attribute): New procedure.
1518 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1520 * gdb.ada/cond_lang/foo.c (callme): Add return type.
1521 * gdb.base/call-sc.c (zed): Likewise.
1522 * gdb.base/checkpoint.c (main): Likewise.
1523 * gdb.base/dump.c (main): Likewise.
1524 * gdb.base/gcore.c (main): Likewise.
1525 * gdb.base/huge.c (main): Likewise.
1526 * gdb.base/multi-forks.c (main): Likewise.
1527 * gdb.base/pr10179-a.c (main): Likewise.
1528 * gdb.base/savedregs.c (main): Likewise.
1529 * gdb.base/sigaltstack.c (main): Likewise.
1530 * gdb.base/siginfo.c (main): Likewise.
1531 * gdb.base/structs.c (zed): Likewise.
1532 * gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
1533 * gdb.mi/mi-syn-frame.c (main): Likewise.
1534 * gdb.mi/until.c (foo, main): Likewise.
1535 * gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
1536 * gdb.base/solib-weak.c (foo): Declare.
1537 * gdb.base/attach-twice.c: Include stdio.h.
1538 * gdb.base/weaklib1.c: Likewise.
1539 * gdb.base/weaklib2.c: Likewise.
1540 * gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
1541 * gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
1543 * gdb.base/attach-pie-misread.c: Include stdlib.h.
1544 * gdb.mi/mi-exit-code.c: Likewise.
1545 * gdb.base/break-interp-lib.c: Include string.h.
1546 * gdb.base/coremaker.c: Likewise.
1547 * gdb.base/testenv.c: Likewise.
1548 * gdb.python/py-finish-breakpoint.c: Likewise.
1549 * gdb.base/inferior-died.c: Include sys/wait.h.
1550 * gdb.base/fileio.c: Include time.h.
1551 * gdb.base/async-shell.c: Include unistd.h.
1552 * gdb.base/dprintf-non-stop.c: Likewise.
1553 * gdb.base/info-os.c: Likewise.
1554 * gdb.mi/mi-console.c: Likewise.
1555 * gdb.mi/watch-nonstop.c: Likewise.
1556 * gdb.python/py-events.c: Likewise.
1557 * gdb.base/async.c (baz): Move up before its invocation.
1558 * gdb.base/code_elim2.c (my_global_func): Likewise.
1559 * gdb.base/skip-solib-lib.c (multiply): Likewise.
1560 * gdb.base/advance.c (func2): Likewise.
1562 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1564 * gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped
1566 * gdb.base/annota3.c: Likewise.
1567 * gdb.base/async.c: Likewise.
1568 * gdb.base/average.c: Likewise.
1569 * gdb.base/call-ar-st.c: Likewise.
1570 * gdb.base/call-rt-st.c: Likewise.
1571 * gdb.base/call-sc.c: Likewise.
1572 * gdb.base/call-strs.c: Likewise.
1573 * gdb.base/ending-run.c: Likewise.
1574 * gdb.base/execd-prog.c: Likewise.
1575 * gdb.base/exprs.c: Likewise.
1576 * gdb.base/foll-exec.c: Likewise.
1577 * gdb.base/foll-fork.c: Likewise.
1578 * gdb.base/foll-vfork.c: Likewise.
1579 * gdb.base/funcargs.c: Likewise.
1580 * gdb.base/gcore.c: Likewise.
1581 * gdb.base/jump.c: Likewise.
1582 * gdb.base/langs0.c: Likewise.
1583 * gdb.base/langs1.c: Likewise.
1584 * gdb.base/langs2.c: Likewise.
1585 * gdb.base/mips_pro.c: Likewise.
1586 * gdb.base/nodebug.c: Likewise.
1587 * gdb.base/opaque0.c: Likewise.
1588 * gdb.base/opaque1.c: Likewise.
1589 * gdb.base/recurse.c: Likewise.
1590 * gdb.base/run.c: Likewise.
1591 * gdb.base/scope0.c: Likewise.
1592 * gdb.base/scope1.c: Likewise.
1593 * gdb.base/setshow.c: Likewise.
1594 * gdb.base/setvar.c: Likewise.
1595 * gdb.base/shmain.c: Likewise.
1596 * gdb.base/shr1.c: Likewise.
1597 * gdb.base/shr2.c: Likewise.
1598 * gdb.base/sigall.c: Likewise.
1599 * gdb.base/signals.c: Likewise.
1600 * gdb.base/so-indr-cl.c: Likewise.
1601 * gdb.base/solib2.c: Likewise.
1602 * gdb.base/structs.c: Likewise.
1603 * gdb.base/sum.c: Likewise.
1604 * gdb.base/vforked-prog.c: Likewise.
1605 * gdb.base/watchpoint.c: Likewise.
1606 * gdb.reverse/shr2.c: Likewise.
1607 * gdb.reverse/until-reverse.c: Likewise.
1608 * gdb.reverse/ur1.c: Likewise.
1609 * gdb.reverse/watch-reverse.c: Likewise.
1611 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1613 * gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
1615 * gdb.base/sepdebug.exp: Drop references to removed code.
1617 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1619 * gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
1620 variant. Preserve original line numbering.
1621 * gdb.base/list1.c: Likewise.
1623 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1625 * gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
1627 * gdb.base/break1.c: Likewise.
1628 * gdb.base/break.exp: Drop references to removed code.
1630 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1632 * gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped
1635 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1637 * gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
1639 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1641 * gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
1642 logic into perform_all_tests() and invoke it with and without
1643 function header prototypes.
1644 (do_function_calls): Remove conditional XFAIL for PR 5318.
1645 (rerun_and_prepare): Remove duplicate code.
1646 (perform_all_tests): New. Main logic moved here.
1648 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1650 * gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
1651 code guarded by #ifdef NO_PROTOTYPES.
1652 (t_double_many_args): Likewise.
1653 (DEF_FUNC_MANY_ARGS_1): Likewise.
1654 (DEF_FUNC_VALUES_1): Likewise.
1655 (t_structs_ldc): Renamed from t_structs_fc in conditional code
1656 guarded by #ifdef PROTOTYPES.
1658 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1660 * gdb.mi/mi-console.c: Add eye-catcher.
1661 * gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
1662 instead of literal line number.
1664 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1666 * gdb.base/shr2.c: Add eye-catcher.
1667 * gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
1670 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1672 * gdb.base/jump.c: Add eye-catchers.
1673 * gdb.base/jump.exp: Refer to eye-catchers instead of literal line
1676 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1678 * gdb.base/execd-prog.c: Add eye-catchers.
1679 * gdb.base/foll-exec.c: Likewise.
1680 * gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
1683 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1685 * gdb.base/ending-run.c: Add eye-catchers.
1686 * gdb.base/ending-run.exp: Refer to eye-catchers instead of
1687 literal line numbers.
1689 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1691 * gdb.base/call-rt-st.c: Add eye-catchers.
1692 * gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
1693 literal line numbers.
1695 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1697 * gdb.base/call-ar-st.c: Add eye-catchers.
1698 * gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
1699 literal line numbers.
1701 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1703 * gdb.base/average.c: Add eye-catchers.
1704 * gdb.base/sum.c: Likewise.
1705 * gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
1706 regexps dynamically.
1708 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1710 * gdb.base/solib1.c: Add eye-catchers.
1711 * gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
1712 literal line numbers.
1714 2014-11-12 Pedro Alves <palves@redhat.com>
1716 * gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
1719 2014-11-12 Pedro Alves <palves@redhat.com>
1721 * gdb.arch/i386-bp_permanent.c: New file.
1722 * gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
1723 (srcfile): Set to i386-bp_permanent.c.
1724 (top level): Adjust to work in both 32-bit and 64-bit modes. Test
1725 that stepi does not execute the 'leave' instruction, instead of
1726 testing it does execute.
1727 * gdb.base/bp-permanent.c: New file.
1728 * gdb.base/bp-permanent.exp: New file.
1730 2014-11-10 Doug Evans <xdje42@gmail.com>
1733 * gdb.base/symtab-search-order.exp: New file.
1734 * gdb.base/symtab-search-order.c: New file.
1735 * gdb.base/symtab-search-order-1.c: New file.
1736 * gdb.base/symtab-search-order-shlib-1.c: New file.
1738 2014-11-07 Pedro Alves <palves@redhat.com>
1741 * gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
1744 2014-11-03 Siva Chandra Reddy <sivachandra@google.com>
1747 * gdb.cp/pr17494.cc: New file.
1748 * gdb.cp/pr17494.exp: New file.
1750 2014-11-02 Yao Qi <yao@codesourcery.com>
1752 * gdb.python/python.exp: Get working directory and match the
1753 output of "set extended-prompt \\w " with it.
1755 2014-10-30 Doug Evans <dje@google.com>
1757 * gdb.python/py-objfile.exp: Add tests for setting random attributes
1759 * gdb.python/py-progspace.exp: Add tests for setting random attributes
1762 2014-10-30 Janis Johnson <janisjo@codesourcery.com>
1764 * gdb.base/fullpath-expand.exp: Skip for a remote host.
1765 * gdb.base/realname-expand.exp: Likewise.
1766 * gdb.linespec/macro-relative.exp: Likewise.
1768 2014-10-29 Pedro Alves <palves@redhat.com>
1771 * gdb.threads/schedlock.c (some_function): New function.
1772 (call_function): New global.
1773 (MAYBE_CALL_SOME_FUNCTION): New macro.
1774 (thread_function): Call it.
1775 * gdb.threads/schedlock.exp (get_args): Add description parameter,
1776 and use it instead of a global counter. Adjust all callers.
1777 (get_current_thread): Use "find current thread" for test message
1778 here rather than having all callers pass down the same string.
1779 (goto_loop): New procedure, factored out from ...
1780 (my_continue): ... this.
1781 (step_ten_loops): Change parameter from test message to command to
1783 (list_count): Delete global.
1784 (check_result): New procedure, factored out from duplicate top
1786 (continue tests): Wrap in with_test_prefix.
1787 (test_step): New procedure, factored out from duplicate top level
1789 (top level): Test "step" in combination with all scheduler-locking
1790 modes. Test "next" in combination with all scheduler-locking
1791 modes, and in combination with stepping over a function call or
1793 * gdb.threads/next-bp-other-thread.c: New file.
1794 * gdb.threads/next-bp-other-thread.exp: New file.
1796 2014-10-29 Pedro Alves <palves@redhat.com>
1799 * gdb.python/python.exp: Test a multi-line command that spawns
1801 * gdb.base/multi-line-starts-subshell.exp: New file.
1803 2014-10-29 Yao Qi <yao@codesourcery.com>
1805 * gdb.base/fileio.exp: Make directories on host.
1807 2014-10-29 Yao Qi <yao@codesourcery.com>
1809 * gdb.base/fileio.c (test_write): Close the file.
1811 2014-10-28 Pedro Alves <palves@redhat.com>
1814 * gdb.base/sigstep.c (no_handler): New global.
1815 (main): If 'no_handler is true, set the signal handlers to
1817 * gdb.base/sigstep.exp (breakpoint_over_handler): Add
1818 with_sw_watch and no_handler parameters. Handle them.
1819 (top level) <stepping over handler when stopped at a breakpoint
1820 test>: Add a test axis for testing with a software watchpoint, and
1821 another for testing with the signal handler set to SIG_IGN.
1822 * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
1823 * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
1825 2014-10-28 Pedro Alves <palves@redhat.com>
1828 * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
1829 * gdb.base/sigstep.exp (other_handler_location): New global.
1830 (advance): Support stepping into the signal handler, and running
1831 commands while in the handler.
1832 (in_handler_map): New global.
1833 (top level): In the advance test, add combinations for getting
1834 into the handler with stepping commands, and for running commands
1835 in the handler. Add comment descripting the advancei tests.
1837 2014-10-28 Pedro Alves <palves@redhat.com>
1839 * gdb.base/sigstep.exp: Use build_executable instead of
1840 prepare_for_testing.
1841 (top level): Move code that starts GDB, runs to main and creates a
1843 (restart): ... this new procedure.
1844 (top level): Move backtrace from signal handler test to ...
1845 (validate_backtrace): ... this new procedure.
1846 (advance, advancei): Rename parameter from 'i' to 'cmd'. Use
1847 with_test_prefix. Always restart GDB.
1848 (skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
1849 with_test_prefix. Always restart GDB. No need to delete
1850 breakpoints after the test.
1851 (test_skip_handler): Remove prefix parameter.
1852 (skip_over_handler, breakpoint_to_handler)
1853 (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
1854 parameter from 'i' to 'cmd'. Use with_test_prefix. Always
1855 restart GDB. No need to delete breakpoints after the test.
1856 (top level): Use foreach to call the test procedures with
1859 2014-10-28 Pedro Alves <palves@redhat.com>
1861 * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
1862 instead of GNATS numbers.
1863 * gdb.base/sigbpt.exp: Likewise.
1864 * gdb.base/siginfo.exp: Likewise.
1865 * gdb.base/sigstep.exp: Likewise.
1867 2014-10-27 Pedro Alves <palves@redhat.com>
1869 * gdb.base/sigstep.c (dummy): New global.
1870 (main): Issue a couple writes to the new global.
1871 * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
1873 (skip_over_handler): Use test_skip_handler.
1874 (top level): Call skip_over_handler for stepi and nexti too.
1875 (breakpoint_over_handler): Use test_skip_handler.
1876 (top level): Call breakpoint_over_handler for stepi and nexti too.
1878 2014-10-27 Yao Qi <yao@codesourcery.com>
1880 * gdb.trace/tfile.c (adjust_function_address)
1881 [__powerpc64__ && _CALL_ELF != 2]: Get function address from
1882 function descriptor.
1884 2014-10-24 Don Breazeal <donb@codesourcery.com>
1886 * gdb.base/foll-fork.exp (test_follow_fork,
1887 catch_fork_child_follow): Check for updated fork messages emitted
1889 * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
1890 vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
1891 vfork_and_exec_child_follow_through_step): Check for updated vfork
1892 messages emitted from infrun.c.
1894 2014-10-24 Pedro Alves <palves@redhat.com>
1896 * gdb.base/corefile.exp: Remove references to ultrix.
1897 * gdb.base/interrupt.exp: Likewise.
1898 * gdb.base/whatis.exp: Likewise.
1899 * gdb.gdb/selftest.exp: Likewise.
1900 * gdb.threads/manythreads.exp: Likewise.
1901 * gdb.threads/print-threads.exp: Likewise.
1902 * gdb.threads/pthreads.exp:: Likewise.
1903 * gdb.threads/schedlock.exp: Likewise.
1905 2014-10-24 Siva Chandra Reddy <sivachandra@google.com>
1907 * gdb.cp/non-trivial-retval.cc: Add a test case.
1908 * gdb.cp/non-trivial-retval.exp: Add a test.
1910 2014-10-20 Yao Qi <yao@codesourcery.com>
1912 * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
1913 * gdb.python/py-objfile-script-gdb.py: New file.
1914 * gdb.python/py-objfile-script.exp: Update reference to
1915 py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
1916 of remote_download. Remove the dest file.
1918 2014-10-20 Yao Qi <yao@codesourcery.com>
1920 * gdb.base/checkpoint.exp: Don't remove file copied on host.
1921 * gdb.base/step-line.exp: Likewise.
1922 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
1923 * gdb.dwarf2/dw2-basic.exp: Likewise.
1924 * gdb.dwarf2/dw2-compressed.exp: Likewise.
1925 * gdb.dwarf2/dw2-filename.exp: Likewise.
1926 * gdb.dwarf2/dw2-intercu.exp: Likewise.
1927 * gdb.dwarf2/dw2-intermix.exp: Likewise.
1928 * gdb.dwarf2/dw2-producer.exp: Likewise.
1929 * gdb.dwarf2/mac-fileno.exp: Likewise.
1930 * gdb.python/py-frame-args.exp: Likewise.
1931 * gdb.python/py-framefilter.exp: Likewise.
1932 * gdb.python/py-mi.exp: Likewise.
1933 * gdb.python/py-objfile-script.exp: Likewise
1934 * gdb.python/py-pp-integral.exp: Likewise.
1935 * gdb.python/py-pp-re-notag.exp: Likewise.
1936 * gdb.python/py-prettyprint.exp: Likewise.
1937 * gdb.python/py-section-script.exp: Likewise.
1938 * gdb.python/py-typeprint.exp: Likewise.
1939 * gdb.python/py-xmethods.exp: Likewise.
1940 * gdb.stabs/weird.exp: Likewise.
1941 * gdb.xml/tdesc-regs.exp: Likewise.
1943 2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
1945 * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
1946 (out_cu): Use addr_len for the size of addresses.
1947 (out_line): Likewise. Size DW_LNE_set_address instruction
1948 according to addr_len.
1949 * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
1950 (FUNC): Add START_INSNS to definition.
1952 2014-10-18 Yao Qi <yao@codesourcery.com>
1954 * gdb.base/argv0-symlink.exp: Check argv[0] value if
1955 gdb_has_argv0 return true.
1956 * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
1957 check [target_info exists noargs], check [gdb_has_argv0]
1959 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
1960 * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
1963 2014-10-17 Doug Evans <dje@google.com>
1965 * gdb.python/py-events.exp: Update expected output for clear_objfiles
1967 * gdb.python/py-events.py: Add clear_objfiles event.
1969 2014-10-17 Doug Evans <dje@google.com>
1971 * gdb.python/py-objfile.exp: Test progspace attribute.
1973 2014-10-17 Luis Machado <lgustavo@codesourcery.com>
1975 * gdb.guile/scm-breakpoint.exp: Do not assume any
1976 directory separators when matching source file paths.
1977 * gdb.python/py-breakpoint.exp: Likewise.
1978 * gdb.reverse/break-precsave.exp: Likewise.
1979 * gdb.reverse/break-reverse.exp: Likewise.
1980 * gdb.reverse/consecutive-precsave.exp: Likewise.
1981 * gdb.reverse/finish-precsave.exp: Likewise.
1982 * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
1983 * gdb.reverse/finish-reverse.exp: Likewise.
1984 * gdb.reverse/i386-precsave.exp: Likewise.
1985 * gdb.reverse/i387-env-reverse.exp: Likewise.
1986 * gdb.reverse/i387-stack-reverse.exp: Likewise.
1987 * gdb.reverse/machinestate-precsave.exp: Likewise.
1988 * gdb.reverse/machinestate.exp: Likewise.
1989 * gdb.reverse/sigall-precsave.exp: Likewise.
1990 * gdb.reverse/solib-precsave.exp: Likewise.
1991 * gdb.reverse/step-precsave.exp: Likewise.
1992 * gdb.reverse/until-precsave.exp: Likewise.
1993 * gdb.reverse/watch-precsave.exp: Likewise.
1994 * gdb.reverse/watch-reverse.exp: Likewise.
1996 2014-10-17 Yao Qi <yao@codesourcery.com>
1998 * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
1999 * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
2001 2014-10-17 Pedro Alves <palves@redhat.com>
2004 * gdb.base/bg-execution-repeat.c: New file.
2005 * gdb.base/bg-execution-repeat.exp: New file.
2007 2014-10-17 Pedro Alves <palves@redhat.com>
2010 * gdb.base/continue-all-already-running.c: New file.
2011 * gdb.base/continue-all-already-running.exp: New file.
2013 2014-10-17 Pedro Alves <palves@redhat.com>
2016 * gdb.base/annota-input-while-running.c: New file.
2017 * gdb.base/annota-input-while-running.exp: New file.
2019 2014-10-17 Pedro Alves <palves@redhat.com>
2021 * gdb.base/callfuncs.exp: emove references to osf.
2022 * gdb.base/sigall.exp: Likewise.
2023 * gdb.gdb/selftest.exp: Likewise.
2024 * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
2025 * gdb.mi/non-stop.c: Likewise.
2026 * gdb.mi/pthreads.c: Likewise.
2027 * gdb.reverse/sigall-precsave.exp: Likewise.
2028 * gdb.reverse/sigall-reverse.exp: Likewise.
2029 * gdb.threads/pthreads.c: Likewise.
2030 * gdb.threads/pthreads.exp: Likewise.
2032 2014-10-17 Yao Qi <yao@codesourcery.com>
2034 * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
2035 check 'target_info exists noargs'.
2036 (test_command_prompt_position): Likewise.
2037 (progvar_simple_if_test): Don't check 'target_info exists noargs'.
2039 (progvar_simple_while_test): Likewise.
2040 (progvar_complex_if_while_test): Likewise.
2041 (if_while_breakpoint_command_test): Likewise.
2042 (infrun_breakpoint_command_test): Likewise.
2043 (breakpoint_command_test): Likewise.
2044 (watchpoint_command_test): Likewise.
2045 (bp_deleted_in_command_test): Likewise.
2046 (temporary_breakpoint_commands): Likewise.
2048 2014-10-16 Yao Qi <yao@codesourcery.com>
2050 * gdb.base/remotetimeout.exp: Remove noargs checking.
2052 2014-10-15 Pedro Alves <palves@redhat.com>
2055 * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
2056 * gdb.base/breakpoint-in-ro-region.exp
2057 (probe_target_hardware_step): New procedure.
2058 (top level): Probe hardware stepping and hardware breakpoint
2059 support. Test stepping through a read-only region, with both
2060 "breakpoint auto-hw" on and off and both "always-inserted" on and
2063 2014-10-15 Iain Buclaw <ibuclaw@gdcproject.org>
2065 * gdb.dlang/demangle.exp: Update for demangling changes.
2067 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
2069 * gdb.cp/non-trivial-retval.cc: Add new test cases.
2070 * gdb.cp/non-trivial-retval.exp: Add new tests.
2072 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
2076 * gdb.cp/non-trivial-retval.cc: New file.
2077 * gdb.cp/non-trivial-retval.exp: New file.
2079 2014-10-15 Yao Qi <yao@codesourcery.com>
2081 * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
2084 2014-10-15 Yao Qi <yao@codesourcery.com>
2086 * gdb.python/py-symbol.exp: Match file base name if host is
2087 remote, otherwise match file name with dir name.
2088 * gdb.python/py-symtab.exp: Likewise.
2089 * gdb.python/python.exp: Likewise.
2091 2014-10-15 Yao Qi <yao@codesourcery.com>
2093 * gdb.python/py-symbol.exp: Remove trailing ".*" in the
2095 * gdb.python/py-symtab.exp: Likewise.
2096 * gdb.python/python.exp: Remove trailing ".*". Fix typo
2099 2014-10-14 Joel Brobecker <brobecker@adacore.com>
2101 * gdb.ada/addr_arith: New testcase.
2103 2014-10-14 Maciej W. Rozycki <macro@codesourcery.com>
2105 * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
2106 * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
2107 * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
2108 * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
2110 2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
2112 * gdb.arch/stap-eval-lang-ada.S: Likewise.
2113 * gdb.arch/stap-eval-lang-ada.c: Likewise.
2114 * gdb.arch/stap-eval-lang-ada.exp: New file.
2116 2014-10-14 Yao Qi <yao@codesourcery.com>
2118 * gdb.mi/mi-var-child.c (nothing1): New function.
2119 (nothing2): New function.
2120 (do_children_tests): Set function pointers by nothing1 and
2122 * gdb.mi/mi-var-child.exp: Step over new added statements.
2123 Update test to match the new output.
2124 * gdb.mi/var-cmd.c (nothing1): New function.
2125 (nothing2): New function.
2126 (do_children_tests): Set function pointers by nothing1 and
2128 * gdb.mi/mi-var-display.exp: Update test to match output.
2129 Step to the line specified by $line_dct_nothing.
2130 Increase the number of lines to step.
2132 2014-10-14 Yao Qi <yao@codesourcery.com>
2134 * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
2136 * gdb.mi/mi2-var-child.exp: Likewise.
2138 2014-10-13 Doug Evans <dje@google.com>
2140 * gdb.python/py-objfile.exp: Change name of file name test.
2142 2014-10-13 Doug Evans <dje@google.com>
2144 * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
2145 from the start of the CU.
2147 2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2148 Yao Qi <yao@codesourcery.com>
2150 Fix "save breakpoints" for "catch" command.
2151 * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
2152 Remove -nonewline. Match also the added "main" line.
2154 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2156 Fix "save breakpoints" for "disable $bpnum" command.
2157 * gdb.base/save-bp.c (main): Add label.
2158 * gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
2160 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2162 * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
2164 2014-10-11 Yao Qi <yao@codesourcery.com>
2166 * gdb.server/server-kill.exp: Execute command
2167 "set remote trace-status-packet on" before "tstatus".
2169 2014-10-11 Yao Qi <yao@codesourcery.com>
2171 * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
2172 (main): Call getppid.
2173 * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
2174 and continue to it. Read variable "server_pid".
2176 2014-10-11 Yao Qi <yao@codesourcery.com>
2178 * gdb.server/server-kill.exp: Remove "delete_breakpoints".
2180 2014-10-11 Yao Qi <yao@codesourcery.com>
2182 * gdb.threads/thread-find.exp: Don't execute command
2184 * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
2185 * gdb.threads/linux-dp.exp: Don't check the condition
2186 $threads_created equals to zero.
2188 2014-10-10 Pedro Alves <palves@redhat.com>
2190 * gdb.base/bigcore.exp: Remove references to IRIX.
2191 * gdb.base/funcargs.exp: Likewise.
2192 * gdb.base/interrupt.exp: Likewise.
2193 * gdb.base/mips_pro.exp: Likewise.
2194 * gdb.base/nodebug.exp: Likewise.
2195 * gdb.base/setvar.exp: Likewise.
2196 * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2198 2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2199 Pedro Alves <palves@redhat.com>
2202 * gdb.base/vdso-warning.c: New file.
2203 * gdb.base/vdso-warning.exp: New file.
2205 2014-10-02 Doug Evans <dje@google.com>
2207 * gdb.base/structs.c (main): Don't run forever.
2209 2014-10-02 Pedro Alves <palves@redhat.com>
2211 * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
2212 (top level) <stop threads 1, stop threads 2>: Use it.
2214 2014-10-02 Pedro Alves <palves@redhat.com>
2216 * gdb.threads/break-while-running.exp (test): Add new
2217 'update_thread_list' argument. Skip "info threads" if false.
2218 (top level): Add new 'update_thread_list' axis.
2220 2014-10-02 Pedro Alves <palves@redhat.com>
2222 PR breakpoints/17431
2223 * gdb.base/execl-update-breakpoints.c: New file.
2224 * gdb.base/execl-update-breakpoints.exp: New file.
2226 2014-10-01 Pedro Alves <palves@redhat.com>
2228 * gdb.base/breakpoint-in-ro-region.c: New file.
2229 * gdb.base/breakpoint-in-ro-region.exp: New file.
2231 2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
2233 * gdb.mi/mi-exit-code.exp: New file.
2234 * gdb.mi/mi-exit-code.c: New file.
2236 2014-09-30 Yao Qi <yao@codesourcery.com>
2238 * lib/prelink-support.exp (build_executable_own_libs): Error if
2239 the target isn't native.
2241 2014-09-30 Yao Qi <yao@codesourcery.com>
2243 * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
2246 2014-09-22 Pedro Alves <palves@redhat.com>
2248 * gdb.threads/break-while-running.exp: New file.
2249 * gdb.threads/break-while-running.c: New file.
2251 2014-09-19 Yao Qi <yao@codesourcery.com>
2253 * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
2254 Invoke test. Restart GDB with --readnow and invoke test again.
2256 2014-09-19 Yao Qi <yao@codesourcery.com>
2258 * gdb.base/break-on-linker-gcd-function.exp: Move test into new
2259 proc set_breakpoint_on_gcd_function. Invoke
2260 set_breakpoint_on_gcd_function. Restart GDB with --readnow and
2261 invoke set_breakpoint_on_gcd_function again.
2263 2014-09-18 Doug Evans <dje@google.com>
2265 * gdb.dwarf2/symtab-producer.exp: New file.
2267 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2269 * gdb.base/global-var-nested-by-dso-solib1.c: New file.
2270 * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
2271 * gdb.base/global-var-nested-by-dso.c: Likewise.
2272 * gdb.base/global-var-nested-by-dso.exp: Likewise.
2274 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2275 Pedro Alves <palves@redhat.com>
2277 * gdb.base/watch-bitfields.exp: Pass string other than test file
2278 name to prepare_for_testing.
2279 (watch): New procedure.
2280 (expect_watchpoint): Use with_test_prefix.
2281 (top level): Factor out tests to ...
2282 (test_watch_location, test_regular_watch): ... these new
2283 procedures, and use with_test_prefix and gdb_continue_to_end.
2285 2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
2287 PR breakpoints/12526
2288 * gdb.base/watch-bitfields.exp: New file.
2289 * gdb.base/watch-bitfields.c: New file.
2291 2014-09-16 Pedro Alves <palves@redhat.com>
2293 * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
2294 software and hardware addresses, not software address against
2297 2014-09-16 Pedro Alves <palves@redhat.com>
2299 * gdb.base/watchpoint-stops-at-right-insn.c: New file.
2300 * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
2302 2014-09-16 Pedro Alves <palves@redhat.com>
2304 * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
2306 * gdb.base/a2-run.exp: Remove all code guarded by istarget
2307 "*-*-vxworks*" throughout.
2308 * gdb.base/break.exp: Likewise.
2309 * gdb.base/default.exp: Likewise.
2310 * gdb.base/scope.exp: Likewise.
2311 * gdb.base/sepdebug.exp: Likewise.
2312 * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
2314 * gdb.base/run.c: Likewise.
2315 * gdb.base/sepdebug.c: Likewise.
2316 * gdb.hp/gdb.aCC/run.c: Likewise.
2317 * gdb.reverse/until-reverse.c: Likewise.
2318 * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
2320 2014-09-16 Yao Qi <yao@codesourcery.com>
2322 * boards/local-remote-host-native.exp: New file.
2324 2014-09-14 Doug Evans <xdje42@gmail.com>
2326 * gdb.threads/queue-signal.c (thread_count): New variable.
2327 (thread_count_mutex, thread_count_condvar): New variables.
2328 (incr_thread_count, wait_all_threads_running): New functions.
2329 (main): Wait for all threads to be in their thread functions.
2331 2014-09-13 Doug Evans <xdje42@gmail.com>
2333 * gdb.threads/queue-signal.c: New file.
2334 * gdb.threads/queue-signal.exp: New file.
2336 2014-09-13 Doug Evans <xdje42@gmail.com>
2338 * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
2339 be consistent with what default_gdb_init uses.
2340 (with_gdb_prompt): Change form of PROMPT argument from a regexp to
2341 the plain text of the prompt. Add some logging printfs.
2342 * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
2344 2014-09-12 Pedro Alves <palves@redhat.com>
2346 * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
2347 gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
2348 * gdb.arch/i386-size-overlap.exp: Likewise.
2349 * gdb.arch/i386-size.exp: Likewise.
2350 * gdb.arch/i386-unwind.exp: Likewise.
2351 * gdb.base/a2-run.exp: Likewise.
2352 * gdb.base/break.exp: Likewise.
2353 * gdb.base/charset.exp: Likewise.
2354 * gdb.base/chng-syms.exp: Likewise.
2355 * gdb.base/commands.exp: Likewise.
2356 * gdb.base/dbx.exp: Likewise.
2357 * gdb.base/find.exp: Likewise.
2358 * gdb.base/funcargs.exp: Likewise.
2359 * gdb.base/jit-simple.exp: Likewise.
2360 * gdb.base/reread.exp: Likewise.
2361 * gdb.base/sepdebug.exp: Likewise.
2362 * gdb.base/step-bt.exp: Likewise.
2363 * gdb.cp/mb-inline.exp: Likewise.
2364 * gdb.cp/mb-templates.exp: Likewise.
2365 * gdb.objc/basicclass.exp: Likewise.
2366 * gdb.threads/killed.exp: Likewise.
2368 2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2371 * gdb.arch/powerpc-stackless.S: New file.
2372 * gdb.arch/powerpc-stackless.exp: New file.
2374 2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2376 * gdb.base/attach.c: Include unistd.h.
2377 (main): Call alarm. Add label postloop.
2378 * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
2379 gdb_breakpoint, gdb_continue_to_breakpoint.
2380 (test_command_line_attach_run): Kill ${testpid} in one exit path.
2382 2014-09-11 Pedro Alves <palves@redhat.com>
2385 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
2386 * gdb.base/attach.exp (test_command_line_attach_run): New
2388 (top level): Call it.
2390 2014-09-11 Pedro Alves <palves@redhat.com>
2392 * lib/gdb.exp (spawn_wait_for_attach): New procedure.
2393 * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
2394 (do_command_attach_tests): Use spawn_wait_for_attach.
2395 * gdb.base/solib-overlap.exp: Likewise.
2396 * gdb.multi/multi-attach.exp: Likewise.
2397 * gdb.python/py-prompt.exp: Likewise.
2398 * gdb.python/py-sync-interp.exp: Likewise.
2399 * gdb.server/ext-attach.exp: Likewise.
2401 2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
2403 * gdb.fortran/array-element.exp: Remove unexpected "continue"
2404 command in testcase. Simplify testcase.
2406 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2408 * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
2410 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2412 * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
2414 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2416 * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
2418 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2420 * gdb.dwarf2/dynarr-ptr.c: New file.
2421 * gdb.dwarf2/dynarr-ptr.exp: New file.
2423 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2425 * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
2426 of 30 rather than hardcoding 120 for a slow test case. Take the
2427 `gdb,timeout' target setting into account for this calculation.
2428 Don't extend the timeout for the test cases that don't need it.
2430 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2432 * gdb.reverse/sigall-reverse.exp: Increase the timeout by
2433 a factor of 2 for a slow test case. Take the `gdb,timeout'
2434 target setting into account for this calculation.
2435 * gdb.reverse/until-precsave.exp: Increase the timeout by
2436 a factor of 15 and 3 respectively rather than adding 120
2437 for a pair of slow test cases. Take the `gdb,timeout'
2438 target setting into account for this calculation.
2440 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2442 * lib/gdb.exp (gdb_test_multiple): Remove code to select the
2443 timeout, don't pass one down to gdb_expect.
2444 (gdb_expect): Rework timeout selection.
2446 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2448 * lib/gdbserver-support.exp (gdbserver_start): Throw an error
2449 exception on timeout.
2450 (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
2451 (gdbserver_start_extended): Catch any `gdbserver_start' error
2453 (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
2454 * lib/mi-support.exp (mi_gdb_target_load): Catch any
2455 `gdbserver_gdb_load' error exceptions.
2457 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2459 * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
2460 120 on waiting for the TCP socket to open.
2462 2014-09-09 Doug Evans <xdje42@gmail.com>
2464 * gdb.base/default.exp (show_conv_list): Add _caller_is,
2465 _caller_matches, _any_caller_is, _any_caller_matches.
2467 2014-09-09 Doug Evans <xdje42@gmail.com>
2469 * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
2471 2014-09-09 Yao Qi <yao@codesourcery.com>
2473 * gdb.mi/mi-var-display.exp: Set print symbol off.
2475 2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
2478 * gdb.base/commands.exp: Add tests to verify user-defined
2479 commands with empty bodies.
2480 * gdb.python/py-cmd.exp: Test that we don't show user-defined
2481 python commands in `show user command`.
2482 * gdb.python/scm-cmd.exp: Test that we don't show user-defined
2483 scheme commands in `show user command`.
2485 2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2488 * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
2489 * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
2490 * gdb.python/py-framefilter-invalidarg.exp: New file.
2491 * gdb.python/py-framefilter-invalidarg.py: New file.
2493 2014-09-06 Doug Evans <xdje42@gmail.com>
2496 * gdb.python/py-caller-is.c: New file.
2497 * gdb.python/py-caller-is.exp: New file.
2499 2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
2502 * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
2503 * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
2505 2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
2508 * gdb.fortran/print-formatted.exp: New file.
2509 * gdb.fortran/print-formatted.f90: Likewise.
2511 2014-09-03 Sasha Smundak <asmundak@google.com>
2513 * gdb.python/py-frame.exp: Test Frame.read_register.
2515 2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
2518 * gdb.python/py-completion.exp: New file.
2519 * gdb.python/py-completion.py: Likewise.
2521 2014-08-28 Doug Evans <dje@google.com>
2523 * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
2524 eax,etc. are live with values set by gdb and thus the compiler can't
2526 * gdb.arch/i386-pseudo.c (main): Ditto.
2528 2014-08-27 Doug Evans <dje@google.com>
2530 * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
2532 2014-08-25 Doug Evans <dje@google.com>
2534 * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
2537 2014-08-25 Doug Evans <dje@google.com>
2539 * gdb.threads/thread-execl.exp: #include <stdio.h>.
2541 2014-08-24 Yao Qi <yao@codesourcery.com>
2543 * gdb.guile/scm-value.exp (test_lazy_strings): Set print
2545 * gdb.python/py-value.exp (test_lazy_strings): Likewise.
2547 2014-08-22 Doug Evans <dje@google.com>
2550 * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
2551 * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
2552 * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
2554 2014-08-22 Yao Qi <yao@codesourcery.com>
2556 * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
2557 * gdb.python/py-finish-breakpoint2.exp: Likewise.
2558 * gdb.python/python.exp: Likewise. Use .py file on the host
2559 instead of the build.
2561 2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2563 * gdb.threads/gcore-stale-thread.c: New file.
2564 * gdb.threads/gcore-stale-thread.exp: New file.
2566 2014-08-21 Pedro Alves <palves@redhat.com>
2568 * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
2569 * gdb.base/gcore-relro-pie.exp: Likewise.
2570 * gdb.base/gcore-relro.exp: Likewise.
2571 * gdb.base/gcore.exp: Likewise.
2572 * gdb.base/print-symbol-loading.exp: Likewise.
2573 * gdb.threads/gcore-thread.exp: Likewise.
2574 * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
2576 2014-08-20 Pedro Alves <palves@redhat.com>
2577 Jan Kratochvil <jan.kratochvil@redhat.com>
2579 * Makefile.in (EXTRA_RULES, CC): New variables, get from
2581 (EXPECT): Handle READ1 being set.
2582 (all): Depend on EXTRA_RULES.
2583 (check-read1, expect-read1, read1.so, read1): New rules.
2584 * README (Testsuite Parameters): Document the READ1 make variable.
2585 (Race detection): New section.
2586 * configure: Regenerate.
2587 * configure.ac: If build==host==target, and running under a
2588 GNU/glibc system, add read1 to the extra Makefile rules.
2589 (EXTRA_RULES): AC_SUBST it.
2590 * lib/read1.c: New file.
2592 2014-08-20 Joel Brobecker <brobecker@adacore.com>
2594 * gdb.dwarf2/data-loc.exp: Add additional tests exercising
2595 the handling of variables declared as a typedef to an array
2596 which a DW_AT_data_location attribute.
2598 2014-08-19 Andrew Burgess <aburgess@broadcom.com>
2599 Pedro Alves <palves@redhat.com>
2603 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
2606 2014-08-19 Pedro Alves <palves@redhat.com>
2608 * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
2610 2014-08-19 Yao Qi <yao@codesourcery.com>
2612 * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
2615 2014-08-18 David Blaikie <dblaikie@gmail.com>
2617 * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
2619 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2621 * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
2622 attribute in array range.
2624 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2626 * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
2628 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2631 * gdb.cp/pr17132.cc: New file.
2632 * gdb.cp/pr17132.exp: New file.
2634 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2636 * gdb.python/py-xmethods.py (A_getarrayind)
2637 (E_method_char_worker.__call__, E_method_int_worker.__call__):
2638 Use 'print' with function call syntax.
2639 (E_method_matcher.match): Fix tab vs space indentation mixup.
2641 2014-08-15 Yao Qi <yao@codesourcery.com>
2643 * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
2646 2014-08-15 Yao Qi <yao@codesourcery.com>
2648 * gdb.cp/casts.exp: Set print symbol off.
2649 * gdb.cp/class2.exp: Likewise.
2650 * gdb.cp/overload.exp: Likewise.
2651 * gdb.cp/templates.exp: Likewise.
2653 2014-08-11 Doug Evans <dje@google.com>
2655 * gdb.base/print-symbol-loading.exp (test_load_core): Update.
2656 (test_load_shlib): Update.
2658 2014-08-09 Yao Qi <yao@codesourcery.com>
2660 * gdb.base/display.exp: Invoke is_address_zero_readable.
2661 * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
2662 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
2663 * gdb.base/hbreak-unmapped.exp: Return if
2664 is_address_zero_readable returns true.
2665 * gdb.base/signest.exp: Likewise.
2666 * gdb.base/signull.exp: Likewise.
2667 * gdb.base/sigbpt.exp: Likewise.
2668 * gdb.guile/scm-disasm.exp: Do the test if
2669 is_address_zero_readable returns false.
2670 * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
2671 * gdb.python/py-arch.exp: Likewise.
2672 * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
2673 * lib/gdb.exp (is_address_zero_readable): New proc.
2675 2014-08-09 Yao Qi <yao@codesourcery.com>
2678 * gdb.mi/mi-var-display.exp: Make test messages unique.
2680 2014-08-04 Tom Tromey <tromey@redhat.com>
2682 * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
2685 2014-08-04 Tom Tromey <tromey@redhat.com>
2687 * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
2690 2014-08-01 Joel Brobecker <brobecker@adacore.com>
2692 * gdb.base/vla-datatypes.c (vla_factory): Add new variable
2693 inner_vla_struct_object_size.
2694 * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
2697 2014-07-30 Pedro Alves <palves@redhat.com>
2699 * gdb.threads/signal-command-handle-nopass.exp (test): Add
2702 2014-07-29 Yao Qi <yao@codesourcery.com>
2705 * gdb.base/until-nodebug.exp: New.
2707 2014-07-28 Doug Evans <xdje42@gmail.com>
2710 * gdb.guile/scm-parameter.exp: Add tests for trying to create
2711 previously existing parameter, and previously ambiguously spelled
2714 2014-07-28 Will Newton <will.newton@linaro.org>
2716 * gdb.base/varargs.exp: Remove KFAILs for ARM.
2718 2014-07-26 Ludovic Courtès <ludo@gnu.org>
2719 Doug Evans <xdje42@gmail.com>
2722 * gdb.guile/types-module.exp: Add tests for wrong type arguments.
2724 2014-07-25 Pedro Alves <palves@redhat.com>
2726 * gdb.threads/signal-command-handle-nopass.c: New file.
2727 * gdb.threads/signal-command-handle-nopass.exp: New file.
2728 * gdb.threads/signal-command-multiple-signals-pending.c: New file.
2729 * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
2730 * gdb.threads/signal-delivered-right-thread.c: New file.
2731 * gdb.threads/signal-delivered-right-thread.exp: New file.
2733 2014-07-25 Pedro Alves <palves@redhat.com>
2735 * gdb.base/double-prompt-target-event-error.exp
2736 (cancel_pagination_in_target_event): Remove '-notransfer <return>'
2738 (cancel_pagination_in_target_event): Rework double prompt
2740 * gdb.base/paginate-after-ctrl-c-running.exp
2741 (test_ctrlc_while_target_running_paginates): Remove '-notransfer
2743 * gdb.base/paginate-bg-execution.exp
2744 (test_bg_execution_pagination_return)
2745 (test_bg_execution_pagination_cancel): Remove '-notransfer
2747 * gdb.base/paginate-execution-startup.exp
2748 (test_fg_execution_pagination_return)
2749 (test_fg_execution_pagination_cancel): Remove '-notransfer
2751 * gdb.base/paginate-inferior-exit.exp
2752 (test_paginate_inferior_exited): Remove '-notransfer <return>'
2754 * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
2755 * lib/gdb.exp (pagination_prompt): Run text through
2757 (gdb_test_multiple): Match $pagination_prompt instead of
2759 (string_to_regexp): Move to lib/gdb-utils.exp.
2761 2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2763 * gdb.arch/amd64-entry-value-paramref.S: New file.
2764 * gdb.arch/amd64-entry-value-paramref.cc: New file.
2765 * gdb.arch/amd64-entry-value-paramref.exp: New file.
2766 * gdb.arch/amd64-optimout-repeat.S: New file.
2767 * gdb.arch/amd64-optimout-repeat.c: New file.
2768 * gdb.arch/amd64-optimout-repeat.exp: New file.
2770 2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
2773 * gdb.base/statistics.exp: New file.
2775 2014-07-17 Doug Evans <dje@google.com>
2778 * gdb.base/maint.exp: Update testing of per-command stats.
2780 2014-07-16 Pedro Alves <palves@redhat.com>
2782 * gdb.trace/tfile.c: Include unistd.h and stdint.h.
2783 (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
2784 (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
2785 (tfile_write_buf): New functions.
2786 (add_memory_block): Rewrite using the above.
2787 (adjust_function_address): New function.
2788 (FUNCTION_ADDRESS): New macro.
2789 (write_basic_trace_file): Remove short_x local, and use
2790 tfile_write_16. Change type of func_addr local to unsigned long
2791 long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
2792 here. Cast argument of add_memory_block to char pointer.
2793 (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
2794 (main): Remove parameters.
2795 * gdb.trace/tfile.exp: Remove nowarnings.
2797 2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
2799 * gdb.base/debug-expr.exp: Test string evaluation with
2800 "debug expression" on.
2802 2014-07-15 Pedro Alves <palves@redhat.com>
2804 * gdb.base/reread.exp: Use clean_restart.
2806 2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
2808 * gdb.arch/avr-flash-qualifer.c: New.
2809 * gdb.arch/avr-flash-qualifer.exp: New.
2811 2014-07-14 Pedro Alves <palves@redhat.com>
2813 * gdb.base/paginate-after-ctrl-c-running.c: New file.
2814 * gdb.base/paginate-after-ctrl-c-running.exp: New file.
2816 2014-07-14 Pedro Alves <palves@redhat.com>
2818 * gdb.base/double-prompt-target-event-error.c: New file.
2819 * gdb.base/double-prompt-target-event-error.exp: New file.
2821 2014-07-14 Pedro Alves <palves@redhat.com>
2824 * gdb.base/paginate-inferior-exit.c: New file.
2825 * gdb.base/paginate-inferior-exit.exp: New file.
2827 2014-07-14 Pedro Alves <palves@redhat.com>
2830 * gdb.base/paginate-bg-execution.c: New file.
2831 * gdb.base/paginate-bg-execution.exp: New file.
2833 2014-07-14 Pedro Alves <palves@redhat.com>
2836 * gdb.base/paginate-execution-startup.c: New file.
2837 * gdb.base/paginate-execution-startup.exp: New file.
2838 * lib/gdb.exp (pagination_prompt): New global.
2839 (default_gdb_spawn): New procedure, factored out from
2841 (default_gdb_start): Adjust to call default_gdb_spawn.
2842 (gdb_spawn): New procedure.
2844 2014-07-14 Pedro Alves <palves@redhat.com>
2846 * lib/gdb.exp (gdb_assert): New procedure.
2847 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
2849 2014-07-14 Pedro Alves <palves@redhat.com>
2851 * gdb.base/execution-termios.c: New file.
2852 * gdb.base/execution-termios.exp: New file.
2854 2014-07-14 Tom Tromey <tromey@redhat.com>
2856 * gdb.cp/vla-cxx.cc: New file.
2857 * gdb.cp/vla-cxx.exp: New file.
2859 2014-07-14 Tom Tromey <tromey@redhat.com>
2861 * gdb.reverse/rerun-prec.c: New file.
2862 * gdb.reverse/rerun-prec.exp: New file.
2864 2014-07-12 Maciej W. Rozycki <macro@mips.com>
2865 Maciej W. Rozycki <macro@codesourcery.com>
2867 * lib/gdb-utils.exp: New file.
2868 * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
2869 inline `gdb_init_command' processing.
2870 (gdb_start_cmd): Likewise.
2871 * lib/mi-support.exp (mi_run_cmd): Likewise.
2872 * README: Document `gdb_init_command' and `gdb_init_commands'.
2874 2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2876 Fix false FAIL running under a very long directory name.
2877 * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
2878 and "set print elements 10000". Twice.
2880 2014-07-11 Yao Qi <yao@codesourcery.com>
2882 * gdb.base/exprs.exp: "set print symbol off".
2884 2014-07-11 Pedro Alves <palves@redhat.com>
2886 * gdb.threads/kill.c: New file.
2887 * gdb.threads/kill.exp: New file.
2889 2014-07-10 Yao Qi <yao@codesourcery.com>
2891 * gdb.trace/tfile.c (write_basic_trace_file)
2892 [__thumb__||__thumb2__]: Clear the Thumb bit of the function
2893 address written to trace file.
2895 2014-07-09 Pedro Alves <palves@redhat.com>
2897 * gdb.base/attach-wait-input.exp: New file.
2898 * gdb.base/attach-wait-input.c: New file.
2900 2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
2902 * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
2903 setting up test structures.
2904 (main): Call new test function.
2905 * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
2906 test function, continue into test function and walk test
2909 2014-07-02 Yao Qi <yao@codesourcery.com>
2911 * gdb.trace/entry-values.c: Define labels 'foo_start' and
2912 'bar_start' at the beginning of functions 'foo' and 'bar'
2914 * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
2915 instead of 'foo' and 'bar'.
2917 2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
2919 * gdb.btrace/segv.exp: New.
2920 * gdb.btrace/segv.c: New.
2922 2014-07-02 Luis Machado <lgustavo@codesourcery.com>
2924 * gdb.trace/entry-values.exp: Handle powerpc-specific branch
2927 2014-06-30 Mark Wielaard <mjw@redhat.com>
2929 * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
2930 vulture, vilify, villar): New volatile array constants.
2931 (vindictive, vegetation): New const volatile array constants.
2932 * gdb.base/volatile.exp: Test volatile and const volatile array
2935 2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
2937 * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
2938 target lacks support for awatch, rwatch, or hbreak.
2940 2014-06-27 Yao Qi <yao@codesourcery.com>
2942 * gdb.multi/dummy-frame-restore.exp: New.
2943 * gdb.multi/dummy-frame-restore.c: New.
2945 2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
2947 * gdb.btrace/gcore.exp: New.
2949 2014-06-23 Pedro Alves <palves@redhat.com>
2951 * gdb.base/watchpoint-reuse-slot.c: New file.
2952 * gdb.base/watchpoint-reuse-slot.exp: New file.
2954 2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
2956 * gdb.python/py-xmethods.exp: Use "progspace" instead of the
2957 progspace's filename in 'info', 'enable' and 'disable' command
2960 2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2962 * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
2963 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
2964 * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
2966 2014-06-20 Gary Benson <gbenson@redhat.com>
2968 * gdb.arch/i386-avx.exp: Fix include file location.
2969 * gdb.arch/i386-sse.exp: Likewise.
2971 2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
2973 * gdb.dlang/expression.exp: New file.
2975 2014-06-19 Pedro Alves <palves@redhat.com>
2977 * gdb.threads/thread-execl.exp (do_test): New procedure, factored
2979 (top level): ... here. Iterate running tests under different
2980 scheduler-locking settings.
2982 2014-06-18 Luis Machado <lgustavo@codesourcery.com>
2984 * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
2985 to DW_FORM_addr and use non-zero addresses.
2987 2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
2990 * gdb.python/py-xmethods.cc: Add global function call counters and
2991 increment them in their respective functions. Remove "cout"
2993 * gdb.python/py-xmethods.exp: Make tests check the global function
2994 call counters instead of depending on inferior IO.
2996 2014-06-18 Don Breazeal <donb@codesourcery.com>
2998 * gdb.base/foll-fork.exp (default_fork_parent_follow):
3000 (explicit_fork_parent_follow): Deleted procedure.
3001 (explicit_fork_child_follow): Deleted procedure.
3002 (test_follow_fork): New procedure.
3003 (do_fork_tests): Replace calls to deleted procedures with
3004 calls to test_follow_fork and reset GDB for subsequent
3007 2014-06-17 Yao Qi <yao@codesourcery.com>
3009 * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
3012 2014-06-17 Luis Machado <lgustavo@codesourcery.com>
3014 * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
3015 Initialize ptr and S explicitly.
3016 (skip_type_update_when_not_use_rtti_test): Likewise.
3018 2014-06-16 Keith Seitz <keiths@redhat.com>
3021 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
3022 the inferior is started.
3024 2014-06-16 Pedro Alves <palves@redhat.com>
3026 * gdb.base/break-main-file-remove-fail.c: New file.
3027 * gdb.base/break-main-file-remove-fail.exp: New file.
3028 * gdb.base/break-unload-file.exp: Use build_executable instead of
3029 prepare_for_testing.
3030 (test_break): New parameter "initial_load". Handle it.
3031 (top level): Add initial_load cmdline/file axis.
3033 2014-06-12 Tom Tromey <tromey@redhat.com>
3035 * gdb.base/completion.exp: Don't use directory name in test.
3037 2014-06-09 Gary Benson <gbenson@redhat.com>
3039 * gdb.base/sigall.c [Functions to send signals]: Reorder to
3040 separate the always-available ANSI-standard signals from the
3041 signals that require checking.
3043 * gdb.reverse/sigall-reverse.c [Functions to send signals]:
3047 2014-06-07 Keith Seitz <keiths@redhat.com>
3051 * gdb.cp/var-tag.cc: New file.
3052 * gdb.cp/var-tag.exp: New file.
3053 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
3054 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
3055 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
3056 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
3058 2014-06-06 Doug Evans <xdje42@gmail.com>
3060 * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
3062 2014-06-06 Pedro Alves <palves@redhat.com>
3064 * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
3065 in target debug output instead of looking at RSP packets,
3066 disabling the test on any target that uses hardware stepping.
3069 2014-06-06 Pedro Alves <palves@redhat.com>
3071 * gdb.base/break-unload-file.exp: Fix typo.
3073 2014-06-06 Yao Qi <yao@codesourcery.com>
3075 * gdb.base/jit.exp (one_jit_test): Restrict the pattern
3076 from "jit_function" to "^jit_function".
3078 2014-06-06 Yao Qi <yao@codesourcery.com>
3080 * gdb.base/async.c (foo): Add one statement.
3081 * gdb.base/async.exp: Get the next instruction address and
3082 match the output of "nexti" by instruction address. Match
3083 the hex address in the output of "finish".
3085 2014-06-06 Gary Benson <gbenson@redhat.com>
3087 * gdb.base/call-signals.c: Remove preprocessor conditionals
3088 for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
3089 SIGSEGV and SIGTERM.
3090 * gdb.base/sigall.c: Likewise.
3091 * gdb.base/unwindonsignal.c: Likewise.
3092 * gdb.reverse/sigall-reverse.c: Likewise.
3094 2014-06-06 Yao Qi <yao@codesourcery.com>
3096 * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
3097 readable, skip the test.
3099 2014-06-06 Yao Qi <yao@codesourcery.com>
3101 * gdb.threads/staticthreads.c (thread_function): Move the line
3102 setting breakpoint on forward.
3103 * gdb.threads/staticthreads.exp: Update comments.
3105 2014-06-05 Ludovic Courtès <ludo@gnu.org>
3107 * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
3108 "history-append! type error".
3110 2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
3112 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
3113 erroneous dprintf expected input.
3115 2014-06-04 Doug Evans <xdje42@gmail.com>
3117 * gdb.guile/scm-generics.exp: Delete.
3119 2014-06-04 Doug Evans <xdje42@gmail.com>
3121 * gdb.guile/scm-breakpoint.exp: Update.
3122 Add tests for breakpoint registration.
3124 2014-06-04 Tom Tromey <tromey@redhat.com>
3126 * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
3128 * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
3129 inner_vla_struct, vla_union types. Initialize objects of those
3130 types and compute their sizes.
3132 2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
3133 Hui Zhu <hui@codesourcery.com>
3135 * gdb.base/fileio.exp: Add test for shell not available as well as
3137 * gdb.base/fileio.c (test_system): Check for shell twice.
3139 2014-06-04 Yao Qi <yao@codesourcery.com>
3141 * gdb.base/auto-connect-native-target.exp: Remove redundant
3142 space from the regexp pattern.
3144 2014-06-04 Yao Qi <yao@codesourcery.com>
3146 * gdb.base/default.exp: Replace "child" with "native" in
3149 2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
3151 * gdb.python/py-xmethods.cc: New testcase to test xmethods.
3152 * gdb.python/py-xmethods.exp: New tests to test xmethods.
3153 * gdb.python/py-xmethods.py: Python script supporting the
3154 new testcase and tests.
3156 2014-06-03 Joel Brobecker <brobecker@adacore.com>
3157 Pedro Alves <palves@redhat.com>
3159 PR breakpoints/17000
3160 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
3161 * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
3163 2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
3165 * gdb.base/subst.exp: Add tests to verify partial path matching
3168 2014-06-03 Pedro Alves <palves@redhat.com>
3170 * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
3171 target that doesn't use software single-stepping.
3173 2014-06-03 Pedro Alves <palves@redhat.com>
3175 PR breakpoints/17000
3176 * gdb.base/sss-bp-on-user-bp-2.c: New file.
3177 * gdb.base/sss-bp-on-user-bp-2.exp: New file.
3179 2014-06-02 Doug Evans <xdje42@gmail.com>
3181 * gdb.guile/scm-parameter.exp: New file.
3183 2014-06-02 Doug Evans <xdje42@gmail.com>
3185 * gdb.guile/scm-cmd.c: New file.
3186 * gdb.guile/scm-cmd.exp: New file.
3188 2014-06-02 Doug Evans <xdje42@gmail.com>
3190 * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
3191 pretty-printer lookup.
3192 * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
3193 (make-pp_s-printer): Call it.
3194 (make-pretty-printer-from-dict): New function.
3195 (lookup-pretty-printer-maker-from-dict): New function.
3196 (*pretty-printer*): Simplify.
3197 (make-objfile-pp_s-printer): New function.
3198 (install-objfile-pretty-printers!): New function.
3199 (make-progspace-pp_s-printer): New function.
3200 (install-progspace-pretty-printers!): New function.
3201 * gdb.guile/scm-progspace.c: New file.
3202 * gdb.guile/scm-progspace.exp: New file.
3204 2014-06-02 Pedro Alves <palves@redhat.com>
3206 * gdb.base/dprintf-bp-same-addr.c: New file.
3207 * gdb.base/dprintf-bp-same-addr.exp: New file.
3209 2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3211 * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
3212 * gdb.arch/powerpc-power.s: Likewise.
3214 2014-06-02 Joel Brobecker <brobecker@adacore.com>
3216 * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
3218 2014-06-01 Yao Qi <yao@codesourcery.com>
3220 * gdb.base/watchpoint.exp (test_watch_location): Check null
3221 pointer can be dereferenced. If not, do the test, otherwise
3224 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3226 * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
3228 * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
3230 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3232 * gdb.arch/amd64-invalid-stack-middle.S: New file.
3233 * gdb.arch/amd64-invalid-stack-middle.c: New file.
3234 * gdb.arch/amd64-invalid-stack-middle.exp: New file.
3235 * gdb.arch/amd64-invalid-stack-top.c: New file.
3236 * gdb.arch/amd64-invalid-stack-top.exp: New file.
3238 2014-05-30 Pedro Alves <palves@redhat.com>
3240 PR breakpoints/17000
3241 * gdb.base/sss-bp-on-user-bp.c: New file.
3242 * gdb.base/sss-bp-on-user-bp.exp: New file.
3244 2014-05-30 David Blaikie <dblaikie@gmail.com>
3246 * gdb.opt/inline-break.c: Fix clang compatibility by specifying
3247 gnu_inline semantics via attribute.
3248 * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
3249 source explicitly specifies the required semantics.
3251 2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
3253 * gdb.reverse/sigall-reverse.exp: Fix a typo.
3255 2014-05-29 Pedro Alves <palves@redhat.com>
3256 Tom Tromey <tromey@redhat.com>
3258 * gdb.base/async-shell.exp: Don't enable target-async.
3259 * gdb.base/async.exp
3260 * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
3262 (top level): Don't test with "target-async".
3263 * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
3264 * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
3265 * gdb.base/inferior-died.exp: Don't enable target-async.
3266 * gdb.base/interrupt-noterm.exp: Likewise.
3267 * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
3268 * gdb.mi/mi-nonstop-exit.exp: Likewise.
3269 * gdb.mi/mi-nonstop.exp: Likewise.
3270 * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
3271 * gdb.mi/mi-nsintrall.exp: Likewise.
3272 * gdb.mi/mi-nsmoribund.exp: Likewise.
3273 * gdb.mi/mi-nsthrexec.exp: Likewise.
3274 * gdb.mi/mi-watch-nonstop.exp: Likewise.
3275 * gdb.multi/watchpoint-multi.exp: Adjust comment.
3276 * gdb.python/py-evsignal.exp: Don't enable target-async.
3277 * gdb.python/py-evthreads.exp: Likewise.
3278 * gdb.python/py-prompt.exp: Likewise.
3279 * gdb.reverse/break-precsave.exp: Don't test with "target-async".
3280 * gdb.server/solib-list.exp: Don't enable target-async.
3281 * gdb.threads/thread-specific-bp.exp: Likewise.
3282 * lib/mi-support.exp: Adjust to use mi-async.
3284 2014-05-29 Pedro Alves <palves@redhat.com>
3287 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
3288 reason, even in sync mode.
3290 2014-05-29 Pedro Alves <palves@redhat.com>
3291 Hui Zhu <hui@codesourcery.com>
3294 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
3295 * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
3296 * gdb.mi/mi-condbreak-call-thr-state.c: New file.
3297 * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
3299 2014-05-28 Joel Brobecker <brobecker@adacore.com>
3301 * config/monitor.exp (gdb_target_monitor): Replace use of
3302 "set remotebaud" by "set serial baud".
3304 2014-05-26 Andy Wingo <wingo@igalia.com>
3306 * gdb.guile/scm-breakpoint.exp:
3307 * gdb.guile/scm-gsmob.exp: Update to use plain old object
3308 properties instead of gdb-object-properties.
3310 2014-05-26 Yao Qi <yao@codesourcery.com>
3312 * gdb.server/no-thread-db.exp: Specify source file name
3313 explicitly when setting a breakpoint.
3315 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3317 * gdb.btrace/vdso.c: New.
3318 * gdb.btrace/vdso.exp: New.
3320 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3322 * gdb.base/gcore.exp (capture_command_output): Move ...
3323 * lib/gdb.exp (capture_command_output): ... here.
3325 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3327 * gdb.btrace/data.exp: Test memory access during btrace replay.
3329 2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
3331 * lib/mi-support.exp (mi_run_cmd_full): Add comments.
3333 2014-05-21 Pedro Alves <palves@redhat.com>
3336 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
3337 (top level): Test that output related to execution commands is
3338 sent to the console with CLI commands, but not with MI commands.
3339 Test that breakpoint events are always mirrored to the console.
3340 Also expect the new source line to be output after a "next" in
3341 async mode too. Make it a pass/fail test.
3342 * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
3344 * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
3346 2014-05-21 Pedro Alves <palves@redhat.com>
3348 * gdb.base/list.exp (build_pattern, test_list): New procedures.
3349 Use them to test variations of "list" after reaching a breakpoint.
3350 * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
3351 Test "list" with listsize 10 after reaching a breakpoint.
3352 * gdb.python/python.exp (decode_line current location line
3353 number): Adjust expected line number.
3355 2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
3357 * lib/mi-support.exp (mi_run_cmd_full): Revert to original
3358 behavior for $args, pass it directly to "run".
3360 2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
3362 * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
3365 2014-05-21 Pedro Alves <palves@redhat.com>
3367 * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
3368 auto-connect-native-target off".
3369 * gdb.base/auto-connect-native-target.c: New file.
3370 * gdb.base/auto-connect-native-target.exp: New file.
3372 2014-05-21 Pedro Alves <palves@redhat.com>
3374 * gdb.base/default.exp: Test "target native" instead of "target
3377 2014-05-21 Mark Wielaard <mjw@redhat.com>
3379 * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
3381 2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3383 Fix TLS access for -static -pthread.
3384 * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
3385 <HAVE_TLS> (thread_function, main): Initialize it.
3386 * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
3388 <$have_tls != "">: Check TLSVAR.
3390 2014-05-21 Pedro Alves <palves@redhat.com>
3392 * gdb.base/dcache-line-read-error.c: New.
3393 * gdb.base/dcache-line-read-error.exp: New.
3395 2014-05-20 Pedro Alves <palves@redhat.com>
3397 * gdb.base/compare-sections.c: New file.
3398 * gdb.base/compare-sections.exp: New file.
3400 2014-05-20 Pedro Alves <palves@redhat.com>
3402 * gdb.base/break-idempotent.c: New file.
3403 * gdb.base/break-idempotent.exp: New file.
3405 2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
3407 * gdb.btrace/nohist.exp: New.
3409 2014-05-20 Yao Qi <yao@codesourcery.com>
3411 * lib/gdb.exp (gdb_init): Set timeout if test file is under
3412 gdb.reverse directory and gdb_reverse_timeout exists in board
3414 * README: Document gdb_reverse_timeout.
3416 2014-05-20 Yao Qi <yao@codesourcery.com>
3418 * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
3419 'test_file_name'. Treat args as a string instead of a list.
3420 (gdb_init): Rename argument 'args' by 'test_file_name'.
3422 2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
3424 * gdb.arch/powerpc-power.exp: New file.
3425 * gdb.arch/powerpc-power.s: New file.
3427 2014-05-16 Doug Evans <dje@google.com>
3429 * gdb.base/Makefile.in (EXECUTABLES): Add completion.
3430 * gdb.base/completion.exp: Check that all expected files exist
3431 before doing file completion.
3433 2014-05-16 Doug Evans <dje@google.com>
3435 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
3437 (do_syscall_tests_without_xml): Update.
3439 2014-05-16 Pedro Alves <palves@redhat.com>
3441 * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
3442 instead of "unknown output after running".
3444 2014-05-16 Yao Qi <yao@codesourcery.com>
3446 * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
3447 file1.txt from host at the end.
3448 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
3450 2014-05-15 Doug Evans <dje@google.com>
3452 * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
3453 * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
3454 loading file. Add test for TU lookup.
3456 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3458 * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
3459 calling "-exec-arguments" or "set args" before running the
3462 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3464 * lib/mi-support.exp (mi_expect_stop): Expect message for
3465 inferiors that exit with non-zero exit code.
3467 2014-05-14 Yao Qi <yao@codesourcery.com>
3469 * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
3470 match absolute path on remote host.
3471 (test_file_list_exec_source_files): Remove "/" from the
3474 2014-05-14 Yao Qi <yao@codesourcery.com>
3476 * boards/local-remote-host-notty.exp (${board}_file): New
3479 2014-05-07 Kyle McMartin <kyle@redhat.com>
3481 Pushed by Joel Brobecker <brobecker@adacore.com>.
3482 * gdb.arch/aarch64-atomic-inst.c: New file.
3483 * gdb.arch/aarch64-atomic-inst.exp: New file.
3485 2014-05-07 Yao Qi <yao@codesourcery.com>
3487 * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
3488 in current context" too.
3490 2014-05-05 Keith Seitz <keiths@redhat.com>
3492 * gdb.linespec/ls-dollar.exp: Add test for linespec
3493 file:convenience_variable.
3495 2014-05-05 Yao Qi <yao@codesourcery.com>
3497 * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
3498 traceframes into tfile and ctf trace files. Read data from
3499 trace file and test collected data.
3500 (gdb_collect_locals_test): Likewise.
3501 (gdb_unavailable_registers_test): Likewise.
3502 (gdb_unavailable_floats): Likewise.
3503 (gdb_collect_globals_test): Likewise.
3504 (top-level): Append "ctf" to trace_file_targets if GDB
3507 2014-05-05 Yao Qi <yao@codesourcery.com>
3509 * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
3511 (gdb_collect_args_test_1): ... it. New proc.
3512 (gdb_collect_locals_test): Move some code to ...
3513 (gdb_collect_locals_test_1): ... it. New proc.
3514 (gdb_unavailable_registers_test): Move some code to ...
3515 (gdb_unavailable_registers_test_1): ... it. New proc.
3516 (gdb_unavailable_floats): Move some code to ...
3517 (gdb_unavailable_floats_1): ... it. New proc.
3519 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3521 * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
3522 probes to test for bitness recognition.
3523 * gdb.arch/amd64-stap-optional-prefix.exp
3524 (test_probe_value_without_reg): New procedure.
3525 Add code to test for different kinds of bitness.
3527 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3529 PR breakpoints/16889
3530 * gdb.arch/amd64-stap-optional-prefix.S: New file.
3531 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
3533 2014-05-01 Pedro Alves <palves@redhat.com>
3535 * lib/gdb.exp (gdb_load): Extend comment. Skip calling
3536 gdb_file_cmd if no file is specified.
3537 * boards/native-extended-gdbserver.exp (gdb_load): Use the
3538 last_loaded_file to set the remote exec-file.
3540 2014-05-01 Pedro Alves <palves@redhat.com>
3542 * boards/local-remote-host.exp: New file.
3544 2014-05-01 Pedro Alves <palves@redhat.com>
3546 * boards/local-remote-host.exp: Rename to ...
3547 * boards/local-remote-host-notty.exp: ... this.
3549 2014-04-28 Joel Brobecker <brobecker@adacore.com>
3551 * gdb.ada/dyn_arrayidx: New testcase.
3553 2014-04-26 Yao Qi <yao@codesourcery.com>
3555 * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
3556 and compute the length of function main. Save it in
3558 (Dwarf::assemble): Use $main_length instead of hard-coded 10.
3559 (top-level): Use gdb_compile to compile objects into
3560 executable and restart GDB. Remove invocation to
3561 prepare_for_testing.
3563 2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
3564 Pedro Alves <palves@redhat.com>
3567 * gdb.multi/multi-attach.c: New file.
3568 * gdb.multi/multi-attach.exp: New file.
3570 2014-04-25 Pedro Alves <palves@redhat.com>
3572 * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
3574 (top level): Test that "set remote conditional-breakpoints-packet
3575 off" works as intended.
3576 * gdb.base/dprintf.exp: Test that "set remote
3577 breakpoint-commands-packet off" works as intended.
3578 * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
3580 (top level): Call it.
3581 * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
3582 remote fast-tracepoints-packet off" works as intended.
3583 * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
3584 * lib/gdb.exp (gdb_is_target_remote): ... here.
3586 2014-04-24 David Blaikie <dblaikie@gmail.com>
3588 * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
3589 ensure clang would not discard them.
3590 * gdb.base/gdbvars.c: Ditto.
3591 * gdb.base/memattr.c: Ditto.
3592 * gdb.base/whatis.c: Ditto.
3593 * gdb.python/py-prettyprint.c: Ditto.
3594 * gdb.trace/actions.c: Ditto.
3595 * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
3596 ensure clang would not discard it.
3598 2014-04-24 David Blaikie <dblaikie@gmail.com>
3600 * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
3601 clang to emit the full definition of type required by the test
3602 * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
3604 2014-04-24 David Blaikie <dblaikie@gmail.com>
3606 * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
3607 coax Clang into emitting the definition of the type.
3608 * gdb.cp/pr10728-x.h (y): Ditto.
3609 * gdb.cp/pr10728-y.cc (y): Ditto.
3611 2014-04-24 David Blaikie <dblaikie@gmail.com>
3613 * gdb.base/label.exp: XFAIL label related tests under Clang.
3614 * gdb.cp/cplabel.exp: Ditto.
3615 * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
3616 under Clang those using labels.
3618 2014-04-25 Yao Qi <yao@codesourcery.com>
3620 * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
3622 * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
3623 partial_label and double_label.
3625 2014-04-24 David Blaikie <dblaikie@gmail.com>
3627 * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
3629 2014-04-24 David Blaikie <dblaikie@gmail.com>
3631 * gdb.cp/cpexprs.cc: Move braces to the same line as the start
3632 of the function to work across GCC and Clang.
3633 * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
3634 pointer types (const void ** const V void **).
3636 2014-04-24 Michael Sturm <michael.sturm@mintel.com>
3637 Walfred Tedeschi <walfred.tedeschi@intel.com>
3639 * Makefile.in (EXECUTABLES): Added i386-avx512.
3640 * gdb.arch/i386-avx512.c: New file.
3641 * gdb.arch/i386-avx512.exp: Likewise.
3643 2014-04-23 Keith Seitz <keiths@redhat.com>
3645 * lib/mi-support.exp (mi_list_breakpoints): Delete.
3646 (mi_make_breakpoint_table): New procedure.
3647 (mi_create_breakpoint): Use mi_make_breakpoint
3648 and return the result.
3649 (mi_make_breakpoint): New procedure.
3650 (mi_build_kv_pairs): New procedure.
3652 * gdb.mi/mi-break.exp: Remove unused globals,
3653 update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
3654 All callers updated.
3655 * gdb.mi/mi-dprintf.exp: Use variable to track command
3657 Update all callers of mi_create_breakpoint and use
3658 mi_make_breakpoint_table.
3659 Remove any unused global variables.
3660 * gdb.mi/mi-nonstop.exp: Likewise.
3661 * gdb.mi/mi-nsintrall.exp: Likewise.
3662 * gdb.mi/mi-nsmoribund.exp: Likewise.
3663 * gdb.mi/mi-nsthrexec.exp: Likewise.
3664 * gdb.mi/mi-reverse.exp: Likewise.
3665 * gdb.mi/mi-simplerun.exp: Likewise.
3666 * gdb.mi/mi-stepn.exp: Likewise.
3667 * gdb.mi/mi-syn-frame.exp: Likewise.
3668 * gdb.mi/mi-until.exp: Likewise.
3669 * gdb.mi/mi-var-cp.exp: Likewise.
3670 * gdb.mi/mi-var-display.exp: Likewise.
3671 * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
3672 * gdb.mi/mi2-var-child.exp: Likewise.
3673 * gdb.mi/mi-vla-c99.exp: Likewise.
3674 * lib/mi-support.exp: Likewise.
3676 From Ian Lance Taylor <iant@cygnus.com>:
3677 * lib/gdb.exp (parse_args): New procedure.
3679 2014-04-23 Pedro Alves <palves@redhat.com>
3681 * gdb.base/break-unload-file.c: New file.
3682 * gdb.base/break-unload-file.exp: New file.
3683 * gdb.base/sym-file-lib.c (baz): New function.
3684 * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
3686 (load): Store the segment's mapped size.
3687 (unload): New function.
3688 (unload_shlib): New function.
3689 * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
3690 * gdb.base/sym-file-main.c (main): Unload, and reload the library,
3691 set a breakpoint at baz, and call it.
3692 * gdb.base/sym-file.exp: New tests for stale breakpoint
3695 2014-04-23 Pedro Alves <palves@redhat.com>
3697 * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
3698 * gdb.base/hbreak-in-shr-unsupported.c: New file.
3699 * gdb.base/hbreak-in-shr-unsupported.exp: New file.
3700 * gdb.base/hbreak-unmapped.c: New file.
3701 * gdb.base/hbreak-unmapped.exp: New file.
3702 * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
3703 * lib/gdb.exp (gdb_is_target_remote): ... here.
3705 2014-04-22 Pedro Alves <palves@redhat.com>
3707 * gdb.base/consecutive-step-over.c: New file.
3708 * gdb.base/consecutive-step-over.exp: New file.
3710 2014-04-22 Pedro Alves <palves@redhat.com>
3712 * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
3713 instead of send_gdb/gdb_expect.
3715 2014-04-22 Yao Qi <yao@codesourcery.com>
3717 * lib/trace-support.exp (generate_tracefile): New procedure.
3718 * gdb.trace/tfile.exp: Skip the test if generate_tracefile
3720 * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
3721 if generate_tracefile returns 1.
3723 2014-04-18 Tom Tromey <palves@redhat.com>
3724 Pedro alves <tromey@redhat.com>
3727 * gdb.opt/inline-bt.exp: Test backtracing from an inline function
3728 with a backtrace limit.
3729 * gdb.python/py-frame-inline.exp: Test running to an inline
3730 function with a backtrace limit, and printing the newest frame.
3731 * gdb.python/py-frame-inline.c (main): Call f.
3733 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3735 * gdb.java/jnpe.exp: Drop srcdir from untested path.
3737 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3739 * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
3740 Drop prefix from unsupported source file path.
3742 2014-04-17 Yao Qi <yao@codesourcery.com>
3744 * lib/gdb.exp (with_target_charset): New proc.
3745 * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
3746 with_target_charset.
3747 (test_print_strings): Likewise.
3748 (test_repeat_bytes): Likewise.
3749 * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
3752 2014-04-16 Keith Seitz <keiths@redhat.com>
3755 * gdb.dwarf2/corrupt.c: New file.
3756 * gdb.dwarf2/corrupt.exp: New file.
3758 2014-04-16 Keith Seitz <keiths@redhat.com>
3761 * gdb.cp/namelessclass.cc: New file.
3762 * gdb.cp/namelessclass.exp: New file.
3763 * gdb.cp/namelessclass.S: New file.
3765 2014-04-16 Doug Evans <dje@google.com>
3767 * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
3769 (gdbserver_default_get_comm_port): New function.
3770 (gdbserver_start): Check if board file provided
3771 "gdbserver,get_comm_port" and use it if so.
3772 * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
3773 (gdb,socketport): Set to "stdio".
3774 (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
3775 (stdio_gdbserver_template): Delete.
3776 (${board}_get_remote_address): Update.
3777 (${board}_build_remote_cmd): Delete.
3778 (${board}_get_comm_port): New function.
3779 (${board}_spawn): Update.
3780 * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
3782 (${board}_get_remote_address): Update.
3783 (${board}_get_comm_port): New function.
3785 2014-04-16 Andrew Burgess <aburgess@broadcom.com>
3787 * gdb.base/memattr.exp: Improve regexps to handle memory regions
3788 appearing in any order.
3790 2014-04-15 Doug Evans <dje@google.com>
3792 * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
3793 uninitialized value of "description".
3795 2014-04-15 Keith Seitz <keiths@redhat.com>
3797 * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
3798 Remove unused globals.
3799 (test_running_the_program): Likewise.
3800 (test_controlled_execution): Likewise.
3801 (test_controlling_breakpoints): Likewise.
3802 (test_program_termination): Likewise.
3804 2014-04-15 Keith Seitz <keiths@redhat.com>
3806 * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
3808 (test_rbreak_creation_and_listing): Likewise.
3809 (test_ignore_count): Likewise.
3810 (test_error): Likewise.
3812 2014-04-15 Pedro Alves <palves@redhat.com>
3814 * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
3815 <ansidecl.h>, <elf/common.h> and <elf/external.h> to
3817 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3818 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3819 to sym-file-loader.c.
3820 (struct library): Forward declare.
3821 (load_shlib, lookup_function): Change prototypes.
3822 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3823 (translate_offset): Remove declarations.
3824 (get_text_addr): New declaration.
3825 * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
3826 <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
3828 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3829 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3830 here from sym-file-loader.h.
3831 (struct library): New structure.
3832 (load_shlib, lookup_function): Change prototypes and adjust to
3833 work with a struct library.
3834 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3835 (translate_offset): Make static.
3836 (get_text_addr): New function.
3837 * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
3839 2014-04-15 Pedro Alves <palves@redhat.com>
3841 * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
3843 2014-04-15 Pedro Alves <palves@redhat.com>
3845 * gdb.base/sym-file-loader.c: Include <limits.h>.
3846 (SELF_LINK): New define.
3847 (get_origin): New function.
3848 (load_shlib): Use it.
3849 * gdb.base/sym-file.exp: Don't early return if the target is
3850 remote. Use runto_main, and issue fail is that fails. Use
3852 (shlib_name): Delete.
3853 (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
3855 2014-04-15 Pedro Alves <palves@redhat.com>
3857 * gdb.base/sym-file.exp: Remove regex characters from test
3858 message. Don't refer to breakpoint numbers in test messages.
3860 2014-04-14 Keith Seitz <keiths@redhat.com>
3863 * gdb.cp/var-tag.cc: New file.
3864 * gdb.cp/var-tag.exp: New file.
3865 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
3866 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
3867 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
3868 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
3870 2014-04-14 Tom Tromey <tromey@redhat.com>
3872 * gdb.cp/classes.exp (test_enums): Handle underlying type.
3873 * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
3875 * gdb.cp/enum-class.exp: New file.
3876 * gdb.cp/enum-class.cc: New file.
3878 2014-04-14 Tom Tromey <tromey@redhat.com>
3880 * gdb.dwarf2/enum-type.exp: New file.
3882 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3884 * gdb.mi/mi-vla-c99.exp: New file.
3885 * gdb.mi/vla.c: New file.
3887 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3889 * gdb.base/vla-datatypes.c: New file.
3890 * gdb.base/vla-datatypes.exp: New file.
3892 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3894 * gdb.base/vla-ptr.c: New file.
3895 * gdb.base/vla-ptr.exp: New file.
3897 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3899 * gdb.dwarf2/count.exp: New file.
3901 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3903 * gdb.base/vla-sideeffect.c: New file.
3904 * gdb.base/vla-sideeffect.exp: New file.
3906 2014-04-14 David Blaikie <dblaikie@gmail.com>
3908 * gdb.mi/non-stop.c: Add return value for non-void function return
3910 * gdb.threads/staticthreads.c: Ditto.
3912 2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
3913 Doug Evans <xdje42@gmail.com>
3915 * gdb.guile/scm-value.c: Improve test case.
3916 * gdb.guile/scm-value.exp: Add new test.
3918 2014-04-11 David Blaikie <dblaikie@gmail.com>
3920 * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
3921 override Clang's default.
3923 2014-04-11 Joel Brobecker <brobecker@adacore.com>
3925 Revert the following changes (regressions):
3927 * gdb.base/vla-sideeffect.c: New file.
3928 * gdb.base/vla-sideeffect.exp: New file.
3930 * gdb.dwarf2/count.exp: New file.
3932 * gdb.base/vla-multi.c: New file.
3933 * gdb.base/vla-multi.exp: New file.
3935 * gdb.base/vla-ptr.c: New file.
3936 * gdb.base/vla-ptr.exp: New file.
3938 * gdb.base/vla-datatypes.c: New file.
3939 * gdb.base/vla-datatypes.exp: New file.
3941 * gdb.mi/mi-vla-c99.exp: New file.
3942 * gdb.mi/vla.c: New file.
3944 2014-04-11 Keith Seitz <keiths@redhat.com>
3947 * gdb.cp/cpsizeof.exp: New file.
3948 * gdb.cp/cpsizeof.cc: New file.
3950 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3952 * gdb.mi/mi-vla-c99.exp: New file.
3953 * gdb.mi/vla.c: New file.
3955 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3957 * gdb.base/vla-datatypes.c: New file.
3958 * gdb.base/vla-datatypes.exp: New file.
3960 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3962 * gdb.base/vla-ptr.c: New file.
3963 * gdb.base/vla-ptr.exp: New file.
3965 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3967 * gdb.base/vla-multi.c: New file.
3968 * gdb.base/vla-multi.exp: New file.
3970 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3972 * gdb.dwarf2/count.exp: New file.
3974 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3976 * gdb.base/vla-sideeffect.c: New file.
3977 * gdb.base/vla-sideeffect.exp: New file.
3979 2014-04-11 Yao Qi <yao@codesourcery.com>
3981 * gdb.base/completion.exp: Check file exists before running tests
3984 2014-04-10 Pedro Alves <palves@redhat.com>
3986 * gdb.base/cond-eval-mode.c: New file.
3987 * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
3988 prepare_for_testing to build the new file. Check result of
3990 (test_break, test_watch): New procedures.
3991 (top level): Use them.
3993 2014-04-08 Pierre Muller <muller@sourceware.org>
3995 * gdb.base/printcmds.exp (test_artificial_arrays): Disable
3996 Ctrl-V use for mingw hosts.
3998 2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
4000 * gdb.python/py-value.c: Improve test case.
4001 * gdb.python/py-value.exp: Add new test.
4003 2014-04-07 David Blaikie <dblaikie@gmail.com>
4005 * lib/compiler.c: Identify the clang compiler.
4006 * lib/compiler.cc: Ditto.
4008 2014-04-03 Yao Qi <yao@codesourcery.com>
4010 * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
4012 2014-04-01 Anton Blanchard <anton@samba.org>
4014 * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
4017 2014-04-01 Anton Blanchard <anton@samba.org>
4019 * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
4020 prepare_for_testing.
4022 2014-04-01 Anton Blanchard <anton@samba.org>
4024 * gdb.arch/ppc64-atomic-inst.c: Remove.
4025 * gdb.arch/ppc64-atomic-inst.S: New file.
4026 * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
4028 2014-03-31 Doug Evans <dje@google.com>
4030 * gdb.base/print-symbol-loading-lib.c: New file.
4031 * gdb.base/print-symbol-loading-main.c: New file.
4032 * gdb.base/print-symbol-loading.exp: New file.
4034 2014-03-31 Yao Qi <yao@codesourcery.com>
4036 * gdb.base/source-dir.exp: Allow ';' as a directory separator.
4038 2014-03-28 Joel Brobecker <brobecker@adacore.com>
4040 * gdb.ada/mi_dyn_arr: New testcase.
4042 2014-03-27 Doug Evans <dje@google.com>
4044 * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
4046 2014-03-27 Yao Qi <yao@codesourcery.com>
4048 * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
4049 if target is nios2-*-*.
4051 2014-03-26 Yao Qi <yao@codesourcery.com>
4053 * lib/gdb.exp (readline_is_used): New proc.
4054 * gdb.base/completion.exp: Move tests on command complete up.
4055 Skip the rest of tests if readline is not used.
4056 * gdb.ada/complete.exp: Skp the test if readline is not
4058 * gdb.base/filesym.exp: Likewise.
4059 * gdb.base/macscp.exp: Likewise.
4060 * gdb.base/readline-ask.exp: Likewise.
4061 * gdb.base/readline.exp: Likewise.
4062 * gdb.python/py-cmd.exp: Likewise.
4063 * gdb.trace/tfile.exp: Likewise.
4065 2014-03-26 Yao Qi <yao@codesourcery.com>
4067 * gdb.base/macscp.exp: Fix code format issues.
4069 2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
4071 * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
4072 * gdb.asm/powerpc64le.inc: New file.
4074 2014-03-25 Pedro Alves <palves@redhat.com>
4075 Doug Evans <dje@google.com>
4077 * gdb.base/source-execution.c: New file.
4078 * gdb.base/source-execution.exp: New file.
4079 * gdb.base/source-execution.gdb: New file.
4081 2014-03-24 Doug Evans <dje@google.com>
4083 * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
4086 2014-03-24 Hui Zhu <hui@codesourcery.com>
4087 Pedro Alves <palves@redhat.com>
4089 PR breakpoints/16101
4090 * gdb.base/dprintf.exp: Use unsupported rather than changing the
4091 test pass/fail messages. Detect missing support for dprintf when
4092 breakpoints are actually inserted.
4093 * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
4094 breakpoints are actually inserted.
4095 * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
4098 2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
4100 * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
4102 2014-03-22 Doug Evans <xdje42@gmail.com>
4104 * gdb.python/python.exp (python not supported): Verify multi-line
4105 python command issues an error.
4106 * gdb.guile/guile.exp (guile not supported): Verify multi-line
4107 guile command issues an error.
4109 2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
4111 * gdb.threads/thread-specific.exp: Handle the lack of usable
4112 $this_breakpoint and $this_thread.
4114 2014-03-21 Hui Zhu <hui@codesourcery.com>
4116 * gdb.base/attach.exp (do_command_attach_tests): New.
4118 2014-03-20 Tom Tromey <tromey@redhat.com>
4119 Pedro Alves <palves@redhat.com>
4122 * gdb.base/condbreak-call-false.c: New file.
4123 * gdb.base/condbreak-call-false.exp: New file.
4125 2014-03-20 Pedro Alves <palves@redhat.com>
4127 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
4129 (block_signals, unblock_signals): Delete.
4130 (child_function_2, main): Remove references to deleted variable
4133 2014-03-20 Pedro Alves <palves@redhat.com>
4135 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
4136 Use pthread_kill to signal thread 2.
4137 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4138 Adjust to make the test send itself a signal rather than using the
4139 host's "kill" command.
4141 2014-03-20 Pedro Alves <palves@redhat.com>
4143 * gdb.threads/multiple-step-overs.c: New file.
4144 * gdb.threads/multiple-step-overs.exp: New file.
4145 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4146 Adjust expected infrun debug output.
4148 2014-03-20 Pedro Alves <palves@redhat.com>
4150 * gdb.threads/step-over-trips-on-watchpoint.c: New file.
4151 * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
4153 2014-03-20 Pedro Alves <palves@redhat.com>
4156 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
4157 old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
4158 of gdb_test_multiple.
4159 * gdb.cp/annota2.exp: Remove kfail for gdb/38.
4160 * gdb.cp/annota3.exp: Remove kfail for gdb/38.
4162 2014-03-20 Pedro Alves <palves@redhat.com>
4164 * gdb.threads/step-over-lands-on-breakpoint.c: New file.
4165 * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
4167 2014-03-19 Pedro Alves <palves@redhat.com>
4169 * gdb.base/async.exp: Remove early return.
4171 2014-03-19 Pedro Alves <palves@redhat.com>
4173 * gdb.base/async.exp (step& tests): Pass explicit test messages.
4175 2014-03-19 Pedro Alves <palves@redhat.com>
4177 * gdb.base/async.exp (test_background): Expect \r\n after
4178 "completed." in the fail pattern.
4180 2014-03-19 Pedro Alves <palves@redhat.com>
4182 * gdb.base/async.exp (test_background): New procedure.
4183 Use it for all background execution command tests.
4185 2014-03-19 Pedro Alves <palves@redhat.com>
4187 * gdb.base/async.exp: Use prepare_for_testing.
4189 2014-03-19 Pedro Alves <palves@redhat.com>
4191 * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
4194 2014-03-19 Pedro Alves <palves@redhat.com>
4196 * gdb.base/async.c (main): Add "jump here" and "until here" line
4198 * gdb.base/async.exp (jump_here): New global.
4199 (jump& test): Use it.
4200 (until_here): New global.
4201 (until& test): Use it.
4203 2014-03-19 Pedro Alves <palves@redhat.com>
4205 * gdb.base/async.exp: Don't frob gdb_protocol.
4207 2014-03-18 Doug Evans <xdje42@gmail.com>
4209 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.
4210 Fix spelling of exec-done-display.
4212 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4215 * gdb.base/gdb-sigterm.c: New file.
4216 * gdb.base/gdb-sigterm.exp: New file.
4218 2014-03-18 Pedro Alves <palves@redhat.com>
4221 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
4222 * lib/mi-support.exp (mi_expect_stop): Add special handling for
4225 2014-03-17 Joel Brobecker <brobecker@adacore.com>
4227 * gdb.ada/pckd_arr_ren: New testcase.
4229 2014-03-13 Doug Evans <xdje42@gmail.com>
4232 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
4233 collect after discarding symbols.
4235 2014-03-13 Ludovic Courtès <ludo@gnu.org>
4236 Doug Evans <xdje42@gmail.com>
4238 * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
4239 to history survives a gc.
4241 2014-03-13 Pedro Alves <palves@redhat.com>
4243 * gdb.base/default.exp: Don't test "target procfs".
4245 2014-03-13 Pedro Alves <palves@redhat.com>
4247 * gdb.base/default.exp: Update "target child" and "target procfs"
4248 tests to not expect "Unix".
4250 2014-03-12 Tom Tromey <tromey@redhat.com>
4252 * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
4253 New procs. Add target-async tests.
4254 * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
4255 Add target-async tests.
4257 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4259 * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
4260 'func_start' and 'func_end' for the beginning and end of the
4261 function code, respectively.
4262 * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
4263 'func_end' instead of 'func' and 'main'.
4265 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4267 * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
4268 * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
4269 generate the debug info assembler source.
4271 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4273 * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
4274 * gdb.dwarf2/arr-subrange.exp: Likewise.
4275 * gdb.dwarf2/dwz.exp: Likewise.
4276 * gdb.dwarf2/method-ptr.exp: Likewise.
4277 * gdb.dwarf2/missing-sig-type.exp: Likewise.
4278 * gdb.dwarf2/subrange.exp: Likewise.
4279 * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
4280 * gdb.dwarf2/implptrpiece.exp: Likewise.
4281 * gdb.dwarf2/nostaticblock.exp: Likewise.
4283 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4285 * lib/gdb.exp (build_executable_from_specs): Don't prepend source
4286 directory to absolute path name arguments.
4288 2014-03-10 Joel Brobecker <brobecker@adacore.com>
4290 * gdb.ada/tagged_access: New testcase.
4292 2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
4294 * gdb.btrace/data.exp: Update expected output.
4296 2014-03-06 Yao Qi <yao@codesourcery.com>
4298 * gdb.trace/pr16508.exp: New file.
4300 2014-03-05 Pedro Alves <palves@redhat.com>
4303 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
4305 (top level): Adjust to use it. Add tests that exercise breakpoint
4306 interaction with the code-cache.
4308 2014-02-26 Ludovic Courtès <ludo@gnu.org>
4310 * gdb.guile/scm-value.exp (test_value_in_inferior): Add
4311 test for 'history-append!'.
4313 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4315 * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
4316 * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
4317 * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
4318 * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
4319 * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
4320 * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
4322 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4324 * testsuite/gdb.python/py-pp-re-notag.c: New file.
4325 * testsuite/gdb.python/py-pp-re-notag.ex: New file.
4326 * testsuite/gdb.python/py-pp-re-notag.p: New file.
4328 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4330 * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
4332 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4334 * gdb.dwarf2/arr-stride.c: New file.
4335 * gdb.dwarf2/arr-stride.exp: New file.
4337 2014-02-26 Pedro Alves <palves@redhat.com>
4339 * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
4340 that won't ever trigger. Make sure that GDB reports the correct
4341 breakpoint that caused the stop.
4343 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4346 * gdb.base/auto-load-script: New file.
4347 * gdb.base/auto-load.c: New file.
4348 * gdb.base/auto-load.exp: New file.
4351 * gdb.base/auto-load.exp: Fix out-of-srctree run.
4353 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4355 Fix dw2-icycle.exp -fsanitize=address GDB crash.
4356 * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
4358 2014-02-24 Doug Evans <dje@google.com>
4360 * lib/gdb.exp (run_on_host): Log error output if program fails.
4362 2014-02-21 Pedro Alves <palves@redhat.com>
4364 * gdb.threads/step-after-sr-lock.c: Rename to ...
4365 * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
4366 * gdb.threads/step-after-sr-lock.exp: Rename to ...
4367 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4370 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
4373 * gdb.arch/amd64-stap-special-operands.exp: New file.
4374 * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
4375 * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
4376 * gdb.arch/amd64-stap-triplet.S: Likewise.
4377 * gdb.arch/amd64-stap-triplet.c: Likewise.
4379 2014-02-20 Joel Brobecker <brobecker@adacore.com>
4381 * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
4382 in .section pseudo-op.
4384 2014-02-20 lin zuojian <manjian2006@gmail.com>
4385 Joel Brobecker <brobecker@adacore.com>
4386 Doug Evans <xdje42@gmail.com>
4389 * gdb.dwarf2/dw2-icycle.S: New file.
4390 * gdb.dwarf2/dw2-icycle.c: New file.
4391 * gdb.dwarf2/dw2-icycle.exp: New file.
4393 2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
4395 * gdb.python/py-value-cc.cc: Improve test case to enable testing
4396 operations on gdb.Value objects.
4397 * gdb.python/py-value-cc.exp: Add new test to test operations on
4400 2014-02-18 Doug Evans <dje@google.com>
4402 * Makefile.in (TESTS): New variable.
4403 (expanded_tests, expanded_tests_or_none): New variables
4404 (check-single): Pass $(expanded_tests_or_none) to runtest.
4405 (check-parallel): Only run tests in $(TESTS) if non-empty.
4406 (check/no-matching-tests-found): New rule.
4407 * README: Document TESTS makefile variable.
4409 2014-02-18 Doug Evans <dje@google.com>
4411 * Makefile.in (check-parallel): rm -rf outputs temp.
4413 2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4415 Fix "ERROR: no fileid for" in the testsuite.
4416 * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
4418 2014-02-12 Doug Evans <dje@google.com>
4420 * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
4421 (MISCELLANEOUS): New variable.
4422 (clean): rm -rf $(MISCELLANEOUS).
4423 * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
4424 dwp live in the same directory as symlinks, with each symlink pointed
4425 to a differently named file in a different directory.
4427 2014-02-11 Doug Evans <dje@google.com>
4429 * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
4430 of Tcl file commands.
4432 2014-02-10 Mark Kettenis <kettenis@gnu.org>
4434 * gdb.threads/step-after-sr-lock.exp: Avoid executing
4437 2014-02-10 Joel Brobecker <brobecker@adacore.com>
4439 * gdb.ada/tick_length_array_enum_idx: New testcase.
4441 2014-02-10 Doug Evans <xdje42@gmail.com>
4443 * configure.ac (AC_OUTPUT): Add gdb.guile.
4444 * configure: Regenerate.
4445 * lib/gdb-guile.exp: New file.
4446 * lib/gdb.exp (get_target_charset): New function.
4447 * gdb.base/help.exp: Update expected output from "apropos apropos".
4448 * gdb.guile/Makefile.in: New file.
4449 * gdb.guile/guile.exp: New file.
4450 * gdb.guile/scm-arch.c: New file.
4451 * gdb.guile/scm-arch.exp: New file.
4452 * gdb.guile/scm-block.c: New file.
4453 * gdb.guile/scm-block.exp: New file.
4454 * gdb.guile/scm-breakpoint.c: New file.
4455 * gdb.guile/scm-breakpoint.exp: New file.
4456 * gdb.guile/scm-disasm.c: New file.
4457 * gdb.guile/scm-disasm.exp: New file.
4458 * gdb.guile/scm-equal.c: New file.
4459 * gdb.guile/scm-equal.exp: New file.
4460 * gdb.guile/scm-error.exp: New file.
4461 * gdb.guile/scm-error.scm: New file.
4462 * gdb.guile/scm-frame-args.c: New file.
4463 * gdb.guile/scm-frame-args.exp: New file.
4464 * gdb.guile/scm-frame-args.scm: New file.
4465 * gdb.guile/scm-frame-inline.c: New file.
4466 * gdb.guile/scm-frame-inline.exp: New file.
4467 * gdb.guile/scm-frame.c: New file.
4468 * gdb.guile/scm-frame.exp: New file.
4469 * gdb.guile/scm-generics.exp: New file.
4470 * gdb.guile/scm-gsmob.exp: New file.
4471 * gdb.guile/scm-iterator.c: New file.
4472 * gdb.guile/scm-iterator.exp: New file.
4473 * gdb.guile/scm-math.c: New file.
4474 * gdb.guile/scm-math.exp: New file.
4475 * gdb.guile/scm-objfile-script-gdb.in: New file.
4476 * gdb.guile/scm-objfile-script.c: New file.
4477 * gdb.guile/scm-objfile-script.exp: New file.
4478 * gdb.guile/scm-objfile.c: New file.
4479 * gdb.guile/scm-objfile.exp: New file.
4480 * gdb.guile/scm-ports.exp: New file.
4481 * gdb.guile/scm-pretty-print.c: New file.
4482 * gdb.guile/scm-pretty-print.exp: New file.
4483 * gdb.guile/scm-pretty-print.scm: New file.
4484 * gdb.guile/scm-section-script.c: New file.
4485 * gdb.guile/scm-section-script.exp: New file.
4486 * gdb.guile/scm-section-script.scm: New file.
4487 * gdb.guile/scm-symbol.c: New file.
4488 * gdb.guile/scm-symbol.exp: New file.
4489 * gdb.guile/scm-symtab-2.c: New file.
4490 * gdb.guile/scm-symtab.c: New file.
4491 * gdb.guile/scm-symtab.exp: New file.
4492 * gdb.guile/scm-type.c: New file.
4493 * gdb.guile/scm-type.exp: New file.
4494 * gdb.guile/scm-value-cc.cc: New file.
4495 * gdb.guile/scm-value-cc.exp: New file.
4496 * gdb.guile/scm-value.c: New file.
4497 * gdb.guile/scm-value.exp: New file.
4498 * gdb.guile/source2.scm: New file.
4499 * gdb.guile/types-module.cc: New file.
4500 * gdb.guile/types-module.exp: New file.
4502 2014-02-10 Yao Qi <yao@codesourcery.com>
4505 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
4506 * configure: Regenerated.
4507 * Makefile.in: New file.
4509 2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
4511 * gdb.python/py-framefilter.exp: Fix typo.
4513 2014-02-08 Yao Qi <yao@codesourcery.com>
4515 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
4516 that no =breakpoint-modified is emitted when breakpoints are
4517 modified through MI commands.
4519 2014-02-07 Pedro Alves <pedro@codesourcery.com>
4520 Pedro Alves <palves@redhat.com>
4522 * gdb.threads/step-after-sr-lock.c: New file.
4523 * gdb.threads/step-after-sr-lock.exp: New file.
4525 2014-02-07 Pedro Alves <palves@redhat.com>
4527 * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
4529 2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
4531 Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
4532 * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
4534 2014-02-06 Doug Evans <xdje42@gmail.com>
4536 * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
4539 * gdb.gdb/python-interrupts.exp: New file.
4541 2014-02-05 Yao Qi <yao@codesourcery.com>
4543 * gdb.trace/report.exp (use_collected_data): Test the output
4544 of "info threads" and "info inferiors".
4546 2014-02-05 Yao Qi <yao@codesourcery.com>
4550 2013-05-24 Yao Qi <yao@codesourcery.com>
4552 * gdb.trace/tfile.exp: Test inferior and thread.
4554 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4556 * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
4558 * gdb.base/step-bt.c: Call hello via function pointer to make
4559 sure its first instruction is executed on powerpc64le-linux.
4561 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4563 * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
4565 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4567 * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
4568 of the test patterns for use on little-endian systems.
4570 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4572 * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
4573 (decimal_vector): Fix for little-endian.
4575 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
4577 * gdb.arch/sparc-sysstep.exp: New file.
4578 * gdb.arch/sparc-sysstep.c: Likewise.
4580 * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
4582 2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4584 * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
4586 2014-01-23 Tom Tromey <tromey@redhat.com>
4588 * gdb.ada/array_char_idx: New testcase.
4590 2014-01-23 Tom Tromey <tromey@redhat.com>
4593 * gdb.python/py-framefilter.exp: Add test using "Error" filter.
4594 * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
4597 2014-01-23 Tom Tromey <tromey@redhat.com>
4600 * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
4601 string from an inferior frame.
4602 * gdb.python/py-framefilter-mi.exp: Update.
4604 2014-01-22 Doug Evans <dje@google.com>
4606 * gdb.server/server-mon.exp: Add tests for "set debug-format".
4608 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4610 * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
4612 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4614 * gdb.trace/entry-values.exp: Remove excess space character from
4615 regex patterns. Handle s390 call instruction.
4617 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4619 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
4620 define "*_start" label. Make "name" static.
4621 * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
4622 ${name} by references to ${name}_start.
4624 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4626 * gdb.base/info-macros.exp: Remove "debug" from the compile
4629 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4631 * gdb.dlang/demangle.exp: New file.
4633 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4635 * gdb.dlang/primitive-types.exp: New file.
4637 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4639 * configure.ac: Create gdb.dlang/Makefile.
4640 * configure: Regenerate.
4641 * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
4642 * gdb.dlang/Makefile.in: New file.
4643 * lib/d-support.exp: New file.
4644 * lib/gdb.exp (skip_d_tests): New proc.
4646 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4648 * gdb.btrace/delta.exp: Check reverse stepi.
4649 * gdb.btrace/tailcall.exp: Update. Add stepping tests.
4650 * gdb.btrace/finish.exp: New.
4651 * gdb.btrace/next.exp: New.
4652 * gdb.btrace/nexti.exp: New.
4653 * gdb.btrace/record_goto.c: Add comments.
4654 * gdb.btrace/step.exp: New.
4655 * gdb.btrace/stepi.exp: New.
4656 * gdb.btrace/multi-thread-step.c: New.
4657 * gdb.btrace/multi-thread-step.exp: New.
4658 * gdb.btrace/rn-dl-bind.c: New.
4659 * gdb.btrace/rn-dl-bind.exp: New.
4660 * gdb.btrace/data.c: New.
4661 * gdb.btrace/data.exp: New.
4662 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4664 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4666 * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
4667 * gdb.btrace/exception.exp: Update.
4668 * gdb.btrace/instruction_history.exp: Update.
4669 * gdb.btrace/record_goto.exp: Update.
4670 * gdb.btrace/tailcall.exp: Update.
4671 * gdb.btrace/unknown_functions.exp: Update.
4672 * gdb.btrace/delta.exp: New.
4674 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4676 * gdb.btrace/record_goto.exp: Add backtrace test.
4677 * gdb.btrace/tailcall.exp: Add backtrace test.
4679 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4681 * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
4682 * gdb.btrace/record_goto.c: New.
4683 * gdb.btrace/record_goto.exp: New.
4684 * gdb.btrace/x86-record_goto.S: New.
4686 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4688 * gdb.btrace/function_call_history.exp: Update tests.
4689 * gdb.btrace/instruction_history.exp: Update tests.
4691 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4693 * gdb.btrace/function_call_history.exp: Fix expected field
4694 order for "record function-call-history".
4695 Add new tests for "record function-call-history /c".
4696 * gdb.btrace/exception.cc: New.
4697 * gdb.btrace/exception.exp: New.
4698 * gdb.btrace/tailcall.exp: New.
4699 * gdb.btrace/x86-tailcall.S: New.
4700 * gdb.btrace/x86-tailcall.c: New.
4701 * gdb.btrace/unknown_functions.c: New.
4702 * gdb.btrace/unknown_functions.exp: New.
4703 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4705 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4707 * gdb.btrace/instruction_history.exp: Update.
4708 * gdb.btrace/function_call_history.exp: Update.
4710 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4712 * gdb.btrace/function_call_history.exp: Fix expected function
4714 * gdb.btrace/instruction_history.exp: Initialize traced.
4715 Remove traced_functions.
4717 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4719 * gdb.btrace/function_call_history.exp: Update
4720 * gdb.btrace/instruction_history.exp: Update.
4722 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4724 * gdb.btrace/enable.exp: Update expected text.
4726 2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
4728 * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
4731 2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
4733 * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
4735 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
4737 * lib/gdb.exp (supports_process_record): Return true for
4738 arm*-linux*. (supports_reverse): Likewise.
4740 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
4744 * gdb.python/py-type.c: Enhance test case.
4745 * gdb.python/py-value-cc.cc: Likewise
4746 * gdb.python/py-type.exp: Add new tests.
4747 * gdb.python/py-value-cc.exp: Likewise
4749 2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
4750 Pedro Alves <palves@redhat.com>
4752 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
4754 * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
4755 references to ${name}_start by references to ${name}.
4757 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4759 * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
4761 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4763 * gdb.python/py-pp-integral.exp: Remove path from "source" test.
4765 2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
4766 Pedro Alves <palves@redhat.com>
4768 * gdb.mi/mi-info-os.exp: Connect to the target with
4771 2014-01-08 Pedro Alves <palves@redhat.com>
4773 * gdb.threads/reconnect-signal.c: New file.
4774 * gdb.threads/reconnect-signal.exp: New file.
4776 2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
4778 * gdb.base/source-dir.exp: New file.
4780 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4782 * gdb.ada/mi_interface: New testcase.
4784 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4786 * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
4787 gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
4788 gdb.ada/pp-rec-component/pck.ads: New files.
4790 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4792 * gdb.python/py-pp-integral.c: New file.
4793 * gdb.python/py-pp-integral.py: New file.
4794 * gdb.python/py-pp-integral.exp: New file.
4796 For older changes see ChangeLog-1993-2013.
4802 ;; version-control: never
4805 Copyright 2014-2015 Free Software Foundation, Inc.
4806 Copying and distribution of this file, with or without modification,
4807 are permitted provided the copyright notice and this notice are preserved.