1 2015-04-10 Pedro Alves <palves@redhat.com>
3 * gdb.base/sigstep.exp (breakpoint_to_handler)
4 (breakpoint_to_handler_entry): New parameter 'displaced'. Use it.
5 Test "backtrace" in handler.
6 (breakpoint_over_handler): New parameter 'displaced'. Use it.
7 (top level): Add new "displaced" test axis to
8 breakpoint_to_handler, breakpoint_to_handler_entry and
9 breakpoint_over_handler.
11 2015-04-10 Pedro Alves <palves@redhat.com>
14 * gdb.threads/multiple-step-overs.exp: Remove expected eof.
16 2015-04-10 Yao Qi <yao.qi@linaro.org>
18 * gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc.
19 (test_add_rn_pc): New function.
20 * gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc.
21 (top level): Invoke test_add_rn_pc.
23 2015-04-10 Pedro Alves <palves@redhat.com>
26 * gdb.base/step-over-no-symbols.exp: New file.
28 2015-04-09 Andy Wingo <wingo@igalia.com>
30 * gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled
31 after the Python tests.
33 2015-04-08 Keith Seitz <keiths@redhat.com>
36 * gdb.python/py-completion.exp: New tests for completion.
37 * gdb.python/py-completion.py (CompleteLimit1): New class.
38 (CompleteLimit2): Likewise.
39 (CompleteLimit3): Likewise.
40 (CompleteLimit4): Likewise.
41 (CompleteLimit5): Likewise.
42 (CompleteLimit6): Likewise.
43 (CompleteLimit7): Likewise.
45 2015-04-08 Pedro Alves <palves@redhat.com>
49 * gdb.threads/multiple-step-overs.c (sigusr1_handler): New
51 (main): Install it as SIGUSR1 handler.
52 * gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix'
53 parameter. Always use "setup" as prefix. Toggle "set
54 displaced-stepping" off/on depending on global. Don't switch to
56 (top level): Add displaced stepping "off/on" test axis. Update
57 "setup" calls. Wrap each subtest with with_test_prefix. Test
58 continuing with a queued signal in each thread.
60 2015-04-08 Pedro Alves <palves@redhat.com>
62 * gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd.
63 * gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd. Use
64 gdb_breakpoint instead of gdb_test that doesn't expect anything.
65 Return early if running to main fails.
66 * gdb.trace/while-stepping.exp: Likewise.
68 2015-04-07 Pedro Alves <palves@redhat.com>
70 * gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id !=
71 $gdb_spawn_id. Use send_inferior and $inferior_spawn_id to
72 interact with inferior program.
74 2015-04-07 Pedro Alves <palves@redhat.com>
76 * lib/gdb.exp (inferior_spawn_id): New global.
77 (gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's
78 spawn id after processing the user code.
79 (default_gdb_start): Set inferior_spawn_id.
80 (send_inferior): New procedure.
81 * lib/gdbserver-support.exp (gdbserver_start): Set
83 (close_gdbserver, gdb_exit): Unset inferior_spawn_id.
85 2015-04-07 Pedro Alves <palves@redhat.com>
87 * lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
88 * lib/gdbserver-support.exp (gdbserver_start): Make
89 $server_spawn_id global.
90 (gdbserver_start): Don't wait for gdbserver's spawn id with
92 (close_gdbserver): New procedure.
93 (gdb_exit): Rename the default version and reimplement.
95 2015-04-07 Pedro Alves <palves@redhat.com>
97 * lib/gdb.exp (gdb_test_multiple): When processing an argument,
98 append the substituted item, not the original item.
100 2015-04-07 Pedro Alves <palves@redhat.com>
102 * gdb.base/interrupt.exp: Use gdb_test_multiple instead of
105 2015-04-07 Pedro Alves <palves@redhat.com>
107 * gdb.base/interrupt.exp: Don't handle the case of the inferior
108 output appearing once only.
110 2015-04-07 Pedro Alves <palves@redhat.com>
112 * gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
113 that doesn't expect anything. Return early if running to main
116 2015-04-07 Yao Qi <yao.qi@linaro.org>
118 * gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
119 (child_function): Call alarm.
120 (main): Move call to alarm into the loop.
121 * gdb.threads/non-stop-fair-events.exp: Build program with
124 2015-04-06 Doug Evans <xdje42@gmail.com>
126 * lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
127 Fix dest parameter to board_info.
128 (fpc_compile): Ditto.
129 (gdb_compile_pascal): Rename dest arg to destfile.
131 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
133 * gdb.ada/funcall_ref.exp: New file.
134 * gdb.ada/funcall_ref/foo.adb: New file.
136 2015-04-02 Yao Qi <yao.qi@linaro.org>
138 * gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
141 2015-04-02 Gary Benson <gbenson@redhat.com>
143 * gdb.base/break-probes.exp: Cope with "target:" sysroot.
145 2015-04-01 Sasha Smundak <asmundak@google.com>
147 * gdb.python/py-unwind-maint.c: New file.
148 * gdb.python/py-unwind-maint.exp: New test.
149 * gdb.python/py-unwind-maint.py: New file.
150 * gdb.python/py-unwind.c: New file.
151 * gdb.python/py-unwind.exp: New test.
152 * gdb.python/py-unwind.py: New test.
154 2015-04-01 Pedro Alves <palves@redhat.com>
156 * gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
157 to fail instead of non-existent $test.
159 2015-04-01 Pedro Alves <palves@redhat.com>
161 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
162 GDBFLAGS if not empty.
164 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
166 * gdb.ada/complete.exp: Remove "multi_line".
167 * gdb.ada/info_exc.exp: Remove "multi_line".
168 * gdb.ada/packed_tagged.exp: Remove "multi_line".
169 * gdb.ada/ptype_field.exp: Remove "multi_line".
170 * gdb.ada/sym_print_name.exp: Remove "multi_line".
171 * gdb.ada/tagged.exp: Remove "multi_line".
172 * gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
174 * gdb.btrace/delta.exp: Likewise.
175 * gdb.btrace/exception.exp: Likewise.
176 * gdb.btrace/function_call_history.exp: Likewise.
177 * gdb.btrace/instruction_history.exp: Likewise.
178 * gdb.btrace/nohist.exp: Likewise.
179 * gdb.btrace/record_goto.exp: Likewise.
180 * gdb.btrace/segv.exp: Likewise.
181 * gdb.btrace/stepi.exp: Likewise.
182 * gdb.btrace/tailcall.exp: Likewise.
183 * gdb.btrace/unknown_functions.exp: Likewise.
184 * gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
185 * lib/gdb.exp: Add the "multi_line" helper.
187 2015-04-01 Pedro Alves <palves@redhat.com>
189 * gdb.threads/tid-reuse.c: New file.
190 * gdb.threads/tid-reuse.exp: New file.
192 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
195 * gdb.base/coredump-filter.c: New file.
196 * gdb.base/coredump-filter.exp: Likewise.
198 2015-03-27 Petr Machata <pmachata@redhat.com>
200 * lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset.
201 (Dwarf::_line_count, Dwarf::_line_saw_file): New variables.
202 (Dwarf::assemble): Initialize them.
203 (Dwarf::lines): New function.
205 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
207 * lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
208 SYMBOL_PREFIX for x86_64-*-cygwin.
210 2015-03-26 Andy Wingo <wingo@igalia.com>
213 * gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
214 const_value but not a location.
215 * gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
216 location defined in non-main CUs are visible.
218 2015-03-26 Yao Qi <yao.qi@linaro.org>
221 * gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
222 Add a line number entry for the same line.
223 * gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
224 Add a line number entry for the same line.
226 2015-03-26 Yao Qi <yao.qi@linaro.org>
228 * gdb.linespec/break-asm-file0.s (func2): Use nop instead of
230 (func): Likewise. Add .Lfunc_1 label.
232 * gdb.linespec/break-asm-file1.s (func3): Use nop instead of
237 2015-03-26 Yao Qi <yao.qi@linaro.org>
239 * gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
240 Call gdb_compile instead to compile each .s files without debug
243 2015-03-26 Yao Qi <yao.qi@linaro.org>
245 * gdb.base/savedregs.exp (process_saved_regs): Make
246 "Saved registers:" optional in the pattern.
248 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
250 * gdb.btrace/next.exp: Merged into step.exp.
251 * gdb.btrace/finish.exp: Merged into step.exp.
252 * gdb.btrace/nexti.exp: Merged into stepi.exp.
253 * gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using
254 "record goto" and checking the exact replay position.
255 * gdb.btrace/stepi.exp: Choose test file based on target. Do not
256 check for "Recording format" in "info record" output.
257 * gdb.btrace/record_goto.exp: Choose test file based on target.
258 * gdb.btrace/x86-record_goto.S: Renamed into ...
259 * gdb.btrace/x86_64-record_goto.S: ... this.
260 * gdb.btrace/i686-record_goto.S: New.
261 * gdb.btrace/x86-tailcall.S: Renamed into ...
262 * gdb.btrace/x86_64-tailcall.S: ... this.
263 * gdb.btrace/i686-tailcall.S: New.
264 * gdb.btrace/x86-tailcall.c: Renamed into ...
265 * gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two
266 separate statements. Update test.
267 * gdb.btrace/delta.exp: Use record_goto.c as test file.
268 * gdb.btrace/gcore.exp: Use record_goto.c as test file.
269 * gdb.btrace/nohist.exp: Use record_goto.c as test file.
270 * gdb.btrace/tailcall.exp: Choose test file based on target.
271 * gdb.btrace/Makefile.in: Remove next, finish, and nexti.
273 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
275 * gdb.btrace/exception.exp: Increase BTS buffer size.
277 2015-03-24 Pedro Alves <palves@redhat.com>
279 * gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".
281 2015-03-24 Pedro Alves <palves@redhat.com>
283 * gdb.threads/schedlock.exp (test_step): No longer expect that
284 "set scheduler-locking step" with "next" over a function call runs
287 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
289 * gdb.mi/mi-pending.exp: Fix output of breakpoint test.
291 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
294 * gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
295 * gdb.mi/mi-pending.c (thread_func): New function.
296 (int main): Add threading support required.
297 * gdb.mi/mi-pending.exp: Add tests for this issue.
298 * gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
299 (pendfunc2): Remove stdio dependency.
300 * gdb.mi/mi-pendshr2.c: New file.
302 2015-03-23 Keith Seitz <keiths@redhat.com>
304 * gdb.linespec/keywords.c: New file.
305 * gdb.linespec/keywords.exp: New file.
307 2015-03-23 Keith Seitz <keiths@redhat.com>
310 * gdb.dwarf2/staticvirtual.exp: New test.
312 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
314 * Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
315 * README: Remove HP-UX and gdb.hp.
317 * configure: Regenerate.
318 * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
319 gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
320 gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
321 gdb.hp/gdb.defects/Makefile.
322 * gdb.hp/Makefile.in: File deleted.
323 * gdb.hp/gdb.aCC/Makefile.in: File deleted.
324 * gdb.hp/gdb.aCC/optimize.c: File deleted.
325 * gdb.hp/gdb.aCC/optimize.exp: File deleted.
326 * gdb.hp/gdb.aCC/run.c: File deleted.
327 * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
328 * gdb.hp/gdb.base-hp/Makefile.in: File deleted.
329 * gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
330 * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
331 * gdb.hp/gdb.base-hp/dollar.c: File deleted.
332 * gdb.hp/gdb.base-hp/dollar.exp: File deleted.
333 * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
334 * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
335 * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
336 * gdb.hp/gdb.base-hp/pxdb.c: File deleted.
337 * gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
338 * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
339 * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
340 * gdb.hp/gdb.base-hp/reg.exp: File deleted.
341 * gdb.hp/gdb.base-hp/reg.s: File deleted.
342 * gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
343 * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
344 * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
345 * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
346 * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
347 * gdb.hp/gdb.compat/Makefile.in: File deleted.
348 * gdb.hp/gdb.compat/average.c: File deleted.
349 * gdb.hp/gdb.compat/sum.c: File deleted.
350 * gdb.hp/gdb.compat/xdb.c: File deleted.
351 * gdb.hp/gdb.compat/xdb0.c: File deleted.
352 * gdb.hp/gdb.compat/xdb0.h: File deleted.
353 * gdb.hp/gdb.compat/xdb1.c: File deleted.
354 * gdb.hp/gdb.compat/xdb1.exp: File deleted.
355 * gdb.hp/gdb.compat/xdb2.exp: File deleted.
356 * gdb.hp/gdb.compat/xdb3.exp: File deleted.
357 * gdb.hp/gdb.defects/Makefile.in: File deleted.
358 * gdb.hp/gdb.defects/bs14602.c: File deleted.
359 * gdb.hp/gdb.defects/bs14602.exp: File deleted.
360 * gdb.hp/gdb.defects/solib-d.c: File deleted.
361 * gdb.hp/gdb.defects/solib-d.exp: File deleted.
362 * gdb.hp/gdb.defects/solib-d1.c: File deleted.
363 * gdb.hp/gdb.defects/solib-d2.c: File deleted.
364 * gdb.hp/gdb.objdbg/Makefile.in: File deleted.
365 * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
366 * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
367 * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
368 * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
369 * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
370 * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
371 * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
372 * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
373 * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
374 * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
375 * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
376 * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
377 * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
378 * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
379 * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
380 * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
381 * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
382 * gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
383 * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
384 * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
385 * gdb.hp/tools/odump: File deleted.
387 2015-03-19 Pedro Alves <palves@redhat.com>
389 * gdb.threads/continue-pending-status.exp (saw_thread_2)
390 (saw_thread_3): New globals.
391 (top level): Increment them when an event for the corresponding
393 (no thread starvation): New test.
395 2015-03-19 Pedro Alves <palves@redhat.com>
397 * gdb.threads/continue-pending-status.c: New file.
398 * gdb.threads/continue-pending-status.exp: New file.
400 2015-03-18 Pedro Alves <palves@redhat.com>
402 * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
403 Use gdb_is_target_remote instead of is_remote. Use
404 gdb_test_multiple instead of gdb_expect. Exit early if
405 gdb_test_multiple hits its internal matches. Tighten stepi tests
406 expected output. Fail on exit with any signal, instead of just
409 2015-03-18 Yao Qi <yao.qi@linaro.org>
412 * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
414 * gdb.base/catch-syscall.exp: Don't skip it on
415 aarch64*-*-linux* target. Remove elements in all_syscalls.
416 (test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
418 (setup_all_syscalls): New proc.
420 2015-03-16 Yao Qi <yao.qi@linaro.org>
422 * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
423 (top level): Skip tests if valid_addr_p returns false for
426 2015-03-11 Andy Wingo <wingo@igalia.com>
428 * gdb.guile/scm-objfile.exp: Add objfile-progspace test.
430 2015-03-11 Yao Qi <yao.qi@linaro.org>
432 * gdb.base/catch-syscall.exp: Fix typo in comments.
434 2015-03-11 Yao Qi <yao.qi@linaro.org>
436 * gdb.base/catch-syscall.exp: Skip it on HP-UX target.
438 2015-03-09 Pedro Alves <palves@redhat.com>
440 * dg-extract-results.py: Delete.
442 2015-03-09 Pedro Alves <palves@redhat.com>
444 Merge dg-extract-results.sh from GCC upstream (r218843).
446 2014-12-17 Sergio Durigan Junior <sergiodj@redhat.com>
447 * dg-extract-results.sh: Use --text with grep to avoid issues with
448 binary files. Fall back to cat -v, if that doesn't work.
450 2015-03-05 Pedro Alves <palves@redhat.com>
452 * gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
454 2015-03-04 Simon Marchi <simon.marchi@ericsson.com>
456 * lib/mi-support.exp (mi_expect_interrupt): Accept
457 alternative event for when in all-stop mode.
459 2015-03-04 Pedro Alves <palves@redhat.com>
461 * gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
463 2015-03-04 Mark Kettenis <kettenis@gnu.org>
465 * gdb.base/foll-fork.exp: Enable on *-*-openbsd*.
467 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
469 * gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
470 regexps for GDB's current line display, accept a hex address
471 preceding the line number.
473 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
475 * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
476 the 'arch1' variable for "s390*-linux*" targets.
478 2015-03-04 Pedro Alves <palves@redhat.com>
480 * gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
481 (main): Pass missing retval argument to pthread_join call.
483 2015-03-02 Pedro Alves <palves@redhat.com>
485 * gdb.threads/thread-execl.exp (do_test): Handle non-stop.
486 (top level): Call do_test with non-stop as well.
488 2015-03-02 Pedro Alves <palves@redhat.com>
490 * lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
493 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
495 * gdb.arch/s390-vregs.exp: New test.
496 * gdb.arch/s390-vregs.S: New file.
498 2015-02-27 Pedro Alves <palves@redhat.com>
500 * gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
501 call to catch_command_errors.
502 * gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
503 catch_command_errors.
505 2015-02-27 Pedro Alves <palves@redhat.com>
507 * gdb.gdb/complaints.exp (test_initial_complaints): Also accept
508 "true" for boolean result.
509 * gdb.gdb/selftest.exp (test_with_self): Also accept full
512 2015-02-27 Pedro Alves <palves@redhat.com>
514 * lib/unbuffer_output.c: New file.
515 * gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
516 (main): Call gdb_unbuffer_output.
518 2015-02-27 Yao Qi <yao.qi@linaro.org>
520 * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
523 2015-02-26 Doug Evans <dje@google.com>
525 * gdb.cp/class2.cc (Dbase, D): New classes.
526 (main): New local delta.
527 * gdb.cp/class2.exp: Test printing delta.
528 * gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes.
529 (dynbar): New global.
530 * gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar.
532 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
534 * gdb.compile/compile-ifunc.c: New file.
535 * gdb.compile/compile-ifunc.exp: New file.
537 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
539 * gdb.base/structs.exp: Check for correct struct on finish.
541 2015-02-26 Yao Qi <yao.qi@linaro.org>
543 * lib/dwarf.exp (function_range): Adjust pattern when $func_length
546 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
548 * gdb.arch/cordic.ko.bz2: New file.
549 * gdb.arch/cordic.ko.debug.bz2: New file.
550 * gdb.arch/ppc64-symtab-cordic.exp: New file.
552 2015-02-25 Yao Qi <yao.qi@linaro.org>
554 * gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
557 2015-02-23 Pedro Alves <palves@redhat.com>
559 * lib/gdb.exp (delete_breakpoints): Rewrite using
562 2015-02-23 Pedro Alves <palves@redhat.com>
564 * gdb.base/info-os.c: Include stdlib.h.
566 2015-02-22 Doug Evans <xdje42@gmail.com>
569 * gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
570 is read after symbols have been re-read.
571 * gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
572 * gdb.ada/exec_changed/second.adb (Second): Ditto.
574 2015-02-21 Doug Evans <dje@google.com>
576 * gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.
578 2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
581 * gdb.arch/i386-biarch-core.core.bz2: New file.
582 * gdb.arch/i386-biarch-core.exp: New file.
584 2015-02-21 Pedro Alves <palves@redhat.com>
586 * gdb.threads/multi-create-ns-info-thr.exp: Return early if
589 2015-02-20 Pedro Alves <palves@redhat.com>
591 * gdb.base/solib-corrupted.exp: Expect "stap" as first column of
594 2015-02-20 Pedro Alves <palves@redhat.com>
596 * gdb.threads/multi-create-ns-info-thr.exp: New file.
598 2015-02-20 Pedro Alves <palves@redhat.com>
600 * gdb.trace/no-attach-trace.exp: Don't run to main. Do
601 clean_restart before gdb_target_supports_trace.
603 2015-02-20 Pedro Alves <palves@redhat.com>
606 * gdb.threads/clone-thread_db.c: New file.
607 * gdb.threads/clone-thread_db.exp: New file.
609 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
612 * gdb.base/catch-gdb-caused-signals.c: New file.
613 * gdb.base/catch-gdb-caused-signals.exp: New file.
615 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
617 * configure: Regenerated.
618 * configure.ac: Use GDB_AC_TRANSFORM.
619 * aclocal.m4: sinclude ../transform.m4.
621 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
623 * lib/dtrace.exp: New file.
624 * gdb.base/dtrace-probe.exp: Likewise.
625 * gdb.base/dtrace-probe.d: Likewise.
626 * gdb.base/dtrace-probe.c: Likewise.
627 * lib/pdtrace.in: Likewise.
628 * configure.ac: Output variables with the transformed names of
629 the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
630 * configure: Regenerated.
632 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
634 * gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
635 expected message when trying to access $_probe_* convenience
636 variables while not on a probe.
638 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
640 * gdb.python/py-framefilter.exp (pagination quit - *): New tests.
642 2015-02-11 Pedro Alves <pedro@codesourcery.com>
644 * gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
645 * gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
647 2015-02-10 Doug Evans <xdje42@gmail.com>
649 * lib/gdb.exp (gdb_load): Always return a result.
651 2015-02-10 Pedro Alves <palves@redhat.com>
653 * gdb.threads/signal-sigtrap.c: New file.
654 * gdb.threads/signal-sigtrap.exp: New file.
656 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
658 * gdb.trace/no-attach-trace.c: New file.
659 * gdb.trace/no-attach-trace.exp: New file.
661 2015-02-09 Mark Wielaard <mjw@redhat.com>
663 * gdb.dwarf2/atomic.c: New file.
664 * gdb.dwarf2/atomic-type.exp: Likewise.
666 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
668 * gdb.btrace/buffer-size.exp: Update "info record" output.
669 * gdb.btrace/delta.exp: Update "info record" output.
670 * gdb.btrace/enable.exp: Update "info record" output.
671 * gdb.btrace/finish.exp: Update "info record" output.
672 * gdb.btrace/instruction_history.exp: Update "info record" output.
673 * gdb.btrace/next.exp: Update "info record" output.
674 * gdb.btrace/nexti.exp: Update "info record" output.
675 * gdb.btrace/step.exp: Update "info record" output.
676 * gdb.btrace/stepi.exp: Update "info record" output.
677 * gdb.btrace/nohist.exp: Update "info record" output.
679 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
681 * gdb.btrace/buffer-size: New.
683 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
685 * gdb.btrace/delta.exp: Update "info record" output.
686 * gdb.btrace/enable.exp: Update "info record" output.
687 * gdb.btrace/finish.exp: Update "info record" output.
688 * gdb.btrace/instruction_history.exp: Update "info record" output.
689 * gdb.btrace/next.exp: Update "info record" output.
690 * gdb.btrace/nexti.exp: Update "info record" output.
691 * gdb.btrace/step.exp: Update "info record" output.
692 * gdb.btrace/stepi.exp: Update "info record" output.
693 * gdb.btrace/nohist.exp: Update "info record" output.
695 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
698 * gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
700 2015-02-06 Pedro Alves <palves@redhat.com>
702 * gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
704 (seconds_left, again): New globals.
705 (main): Wait seconds_left in a 1-second sleep loop instead of
706 sleeping 180 seconds. If 'again' is set, reset the seconds
708 * gdb.threads/attach-many-short-lived-threads.exp (test): Set
709 'again' in the inferior before detaching. Print the seconds left.
710 (options): New global.
711 (top level): Build program with -DTIMEOUT=$timeout.
713 2015-02-06 Pedro Alves <palves@redhat.com>
715 * gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
716 determine how many seconds to pass to 'alarm'.
717 * gdb.base/gdb-sigterm.exp (top level): Build program with
719 (do_test): Return success/failure indication. Add more verbose
720 logging. Don't fail if 200 single steps are seen. Instead, fail
721 when the test times out.
722 (passes): New global.
723 (top level): Break the testing loop if testing fails on any
724 iteration. Use gdb_assert.
726 2015-02-04 Don Breazeal <donb@codesourcery.com>
728 * gdb.base/info-os.c (shmid, semid, msqid): Make variables static
730 (ipc_cleanup): New function.
731 (main): Don't declare shmid, semid, and msqid. Add a call to
732 atexit so that we call ipc_cleanup on exit.
734 2015-02-04 Pedro Alves <palves@redhat.com>
736 * boards/native-extended-gdbserver.exp: Remove any target variant
737 specifications from the board name before clearing the isremote
738 flag from board_info.
740 2015-01-31 Doug Evans <xdje42@gmail.com>
742 * gdb.base/maint.exp <maint print type argc>: Update expected output.
744 2015-01-31 Gary Benson <gbenson@redhat.com>
746 * gdb.base/completion.exp: Disable completion limiting for
747 existing tests. Add new tests to check completion limiting.
748 * gdb.linespec/ls-errs.exp: Disable completion limiting.
750 2015-01-31 Doug Evans <xdje42@gmail.com>
752 * gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12.
754 2015-01-31 Doug Evans <xdje42@gmail.com>
756 * gdb.guile/scm-section-script.c: Add duplicate inlined section script
757 entries. Duplicate file section script entries.
758 * gdb.guile/scm-section-script.exp: Add tests for duplicate entries,
759 inlined entries. Add test for safe-path rejection.
760 * gdb.python/py-section-script.c: Add duplicate inlined section script
761 entries. Duplicate file section script entries.
762 * gdb.python/py-section-script.exp: Add tests for duplicate entries,
763 inlined entries. Add test for safe-path rejection.
765 2015-01-29 Joel Brobecker <brobecker@adacore.com>
767 * gdb.ada/disc_arr_bound: New testcase.
769 2015-01-29 Joel Brobecker <brobecker@adacore.com>
771 * gdb.ada/mi_var_array: New testcase.
773 2015-01-27 Doug Evans <dje@google.com>
775 * gdb.python/py-objfile.exp: Add tests for objfile.username.
776 Add test for objfile.filename, objfile.username after objfile
779 2015-01-26 Joel Brobecker <brobecker@adacore.com>
781 * gdb.python/py-lookup-type.exp (test_lookup_type): Change
782 the second test to print the name attribute of value
783 returned by the call to gdb.lookup_type, and adjust
784 the expected output accordingly.
786 2015-01-25 Mark Wielaard <mjw@redhat.com>
788 * gdb.arch/i386-bp_permanent.c (standard): New declaration.
789 * gdb.base/disp-step-fork.c: Include unistd.h.
790 * gdb.base/siginfo-obj.c: Include stdio.h.
791 * gdb.base/siginfo-thread.c: Likewise.
792 * gdb.mi/non-stop.c: Include unistd.h.
793 * gdb.mi/nsthrexec.c: Include stdio.h.
794 * gdb.mi/pthreads.c: Include unistd.h.
795 * gdb.modula2/unbounded1.c (main): Declare returns int.
796 * gdb.reverse/consecutive-reverse.c: Likewise.
797 * gdb.threads/create-fail.c: Include unistd.h.
798 * gdb.threads/killed.c: Likewise.
799 * gdb.threads/linux-dp.c: Likewise.
800 * gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
801 * gdb.threads/non-ldr-exc-2.c: Likewise.
802 * gdb.threads/non-ldr-exc-3.c: Likewise.
803 * gdb.threads/non-ldr-exc-4.c: Likewise.
804 * gdb.threads/pthreads.c: Include unistd.h.
805 (main): Declare returns int.
806 * gdb.threads/tls-main.c (foo): New declaration.
807 * gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
809 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
811 * gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
812 * gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
814 2015-01-15 Mark Wielaard <mjw@redhat.com>
816 * gdb.base/noreturn-return.c: New file.
817 * gdb.base/noreturn-return.exp: New file.
818 * gdb.base/noreturn-finish.c: New file.
819 * gdb.base/noreturn-finish.exp: New file.
821 2015-01-23 Pedro Alves <palves@redhat.com>
823 * gdb.threads/continue-pending-after-query.c: New file.
824 * gdb.threads/continue-pending-after-query.exp: New file.
826 2015-01-22 Anders Granlund <anders.granlund@ericsson.com>
827 Simon Marchi <simon.marchi@ericsson.com>
829 * gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
830 * gdb.base/valgrind-db-attach.exp: Same.
831 * gdb.base/valgrind-infcall.exp: Same.
832 * lib/mi-support.exp (default_mi_gdb_start): Same.
833 * lib/prompt.exp (default_prompt_gdb_start): Same.
834 * lib/gdb.exp (default_gdb_spawn): Same.
838 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
840 * gdb.compile/compile.exp (pointer to jit function): New test.
842 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
844 * lib/gdb.exp (supports_process_record): Return true for
846 (supports_reverse): Likewise.
848 2015-01-15 Don Breazeal <donb@codesourcery.com>
850 * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
851 instead of checking whether the target board is remote and
852 use spawn_wait_for_attach instead of exec/sleep.
853 * gdb.base/attach-twice.exp: Likewise.
855 2015-01-15 Joel Brobecker <brobecker@adacore.com>
857 * gdb.ada/var_arr_attrs: New testcase.
859 2015-01-14 Pedro Alves <palves@redhat.com>
860 Joel Brobecker <brobecker@adacore.com>
863 * gdb.base/bp-cmds-execution-x-script.c: New file.
864 * gdb.base/bp-cmds-execution-x-script.exp: New file.
865 * gdb.base/bp-cmds-execution-x-script.gdb: New file.
867 2015-01-14 Pedro Alves <palves@redhat.com>
870 * gdb.base/batch-preserve-term-settings.c: New file.
871 * gdb.base/batch-preserve-term-settings.exp: New file.
873 2015-01-13 Doug Evans <dje@google.com>
875 * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
878 2015-01-13 Joel Brobecker <brobecker@adacore.com>
880 * Makefile.in (clean mostlyclean): Do not delete *.py.
882 2015-01-13 Joel Brobecker <brobecker@adacore.com>
884 * gdb.python/py-lookup-type.exp: New file.
886 2015-01-12 Pedro Alves <palves@redhat.com>
888 * gdb.python/py-prompt.exp: When the board can't spawn for attach,
889 restore GDBFLAGS before returning.
891 2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
893 * gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
894 is_amd64_regs_target and is_x86_like_target.
896 2015-01-11 Doug Evans <xdje42@gmail.com>
898 * lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
899 is given without an explicit form.
900 * gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
902 * gdb.dwarf/corrupt.exp: Ditto.
903 * gdb.dwarf2/enum-type.exp: Ditto.
904 * gdb.trace/entry-values.exp: Ditto.
905 * gdb.trace/unavailable-dwarf-piece.exp: Ditto.
907 2015-01-11 Doug Evans <xdje42@gmail.com>
910 * gdb.base/maint.exp: Remove references to "maint demangle".
911 * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
912 Add tests for explicitly specifying language to demangle.
913 * gdb.dlang/demangle.exp: Ditto.
915 2015-01-09 Pedro Alves <palves@redhat.com>
917 * gdb.threads/non-stop-fair-events.c: New file.
918 * gdb.threads/non-stop-fair-events.exp: New file.
920 2015-01-09 Pedro Alves <palves@redhat.com>
922 * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
923 the global scope. Set a breakpoint after all threads are started
924 rather than stepping over two source lines. Expect the prompt.
925 * gdb.base/watch_thread_num.c (threads_started_barrier): New
928 (main): Use threads_started_barrier to wait for all threads to
929 start. Main thread no longer calls thread_function. Exit after
931 (loop): New function.
932 (thread_function): Wait on threads_started_barrier barrier. Call
933 'loop' at each iteration.
934 * gdb.base/watch_thread_num.exp: Continue to breakpoint after all
935 threads have started, instead of hardcoding number of "next"
936 steps. Use an access watchpoint instead of a write watchpoint.
938 2015-01-09 Pedro Alves <palves@redhat.com>
940 * gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
941 (thread_func): Wait on barrier.
942 (main): Wait for all threads to start before stopping GDB.
943 * gdb.threads/siginfo-threads.c (threads_started_barrier): New
945 (thread1_func, thread2_func): Wait on barrier.
946 (main): Wait for all threads to start before stopping GDB.
947 * gdb.threads/watchthreads-reorder.c (threads_started_barrier):
949 (thread1_func, thread2_func): Wait on barrier.
950 (main): Wait for all threads to start before stopping GDB.
952 2015-01-09 Pedro Alves <palves@redhat.com>
954 * gdb.threads/attach-many-short-lived-threads.c: New file.
955 * gdb.threads/attach-many-short-lived-threads.exp: New file.
957 2014-01-09 Pedro Alves <palves@redhat.com>
959 * gdb.threads/fork-thread-pending.exp: Switch to the main thread
960 instead of to thread 2.
961 * gdb.threads/signal-command-multiple-signals-pending.c (main):
962 Add barrier around each pthread_create call instead of around all
964 * gdb.threads/signal-command-multiple-signals-pending.exp (test):
965 Set a break on thread_function and have the child threads hit it
968 2015-01-09 Pedro Alves <palves@redhat.com>
970 * lib/gdb.exp (can_spawn_for_attach): New procedure.
971 (spawn_wait_for_attach): Error out if can_spawn_for_attach returns
973 * gdb.base/attach.exp: Use can_spawn_for_attach instead of
974 checking whether the target board is remote.
975 * gdb.multi/multi-attach.exp: Likewise.
976 * gdb.python/py-sync-interp.exp: Likewise.
977 * gdb.server/ext-attach.exp: Likewise.
978 * gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
979 tests that need to attach, instead of checking whether the target
980 board is remote at the top of the file.
982 2015-01-08 Yao Qi <yao@codesourcery.com>
984 * gdb.trace/entry-values.exp: Set call_insn for MIPS target.
986 2015-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
988 Fix testcase compilation.
989 * gdb.arch/i386-avx512.exp (comp_flags): Remove /common.
991 2015-01-06 Joel Brobecker <brobecker@adacore.com>
993 * gdb.python/py-type.exp: Add a couple test about empty
994 array creation, and negative-length array creation.
996 2015-01-02 Doug Evans <xdje42@gmail.com>
998 * gdb.cp/nsalias.exp: Fix output of external/declaration flags.
1000 2015-01-02 Doug Evans <dje@google.com>
1002 * gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc.
1004 2014-12-29 Yao Qi <yao@codesourcery.com>
1006 * gdb.trace/entry-values.exp: Update comments. Rename variable
1007 bar_call_foo to returned_from_foo.
1009 2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
1012 * gdb.linespec/break-asm-file.c: New file.
1013 * gdb.linespec/break-asm-file.exp: New file.
1014 * gdb.linespec/break-asm-file0.s: New file.
1015 * gdb.linespec/break-asm-file1.s: New file.
1017 2014-12-18 Nigel Stephens <nigel@mips.com>
1018 Maciej W. Rozycki <macro@codesourcery.com>
1020 * gdb.base/float.exp: Handle the new output from "info float" on
1023 2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1025 Fix MinGW compilation.
1026 * gdb.compile/compile-ops.exp: Update untested message if
1027 !skip_compile_feature_tests.
1028 * gdb.compile/compile-setjmp.exp: Likewise.
1029 * gdb.compile/compile-tls.exp: Likewise.
1030 * gdb.compile/compile.exp: Likewise.
1031 * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
1032 supported on this host".
1034 2014-12-16 Doug Evans <xdje42@gmail.com>
1036 * boards/stabs.exp: New file.
1038 2014-12-16 Andreas Arnez <arnez@vnet.linux.ibm.com>
1040 * gdb.base/completion.exp: Adjust to format changes of "maint
1041 print user-registers".
1043 2014-12-16 Catalin Udma <catalin.udma@freescale.com>
1046 * gdb.arch/aarch64-fp.c: New file.
1047 * gdb.arch/aarch64-fp.exp: New file.
1049 2014-12-15 Sergio Durigan Junior <sergiodj@redhat.com>
1051 Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
1052 r210637, r210913, r211666, r215400, r215817).
1054 2014-05-08 Richard Sandiford <rdsandiford@googlemail.com>
1055 * dg-extract-results.py: New file.
1056 * dg-extract-results.sh: Use it if the environment seems
1059 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
1061 * dg-extract-results.py (parse_run): Handle warnings that
1062 are printed before a test harness is run.
1064 2014-05-25 Richard Sandiford <rdsandiford@googlemail.com>
1066 * dg-extract-results.py (Named): Remove __cmp__ method.
1067 (output_variation): Use a key to sort variation.harnesses.
1069 2014-06-14 Richard Sandiford <rdsandiford@googlemail.com>
1071 * dg-extract-results.py: For Python 3, force sys.stdout to
1072 handle surrogate escape sequences.
1073 (safe_open): New function.
1074 (output_segment, main): Use it.
1076 2014-09-19 Segher Boessenkool <segher@kernel.crashing.org>
1078 * dg-extract-results.py (Prog.result_re): Include options
1081 2014-10-02 Segher Boessenkool <segher@kernel.crashing.org>
1083 * dg-extract-results.py (output_variation): Always sort if
1086 2014-12-15 Simon Marchi <simon.marchi@ericsson.com>
1088 * lib/gdb.exp (default_gdb_start): After starting gdb, loop
1089 as long as we get pagination notifications.
1091 2014-12-15 Jason Merrill <jason@redhat.com>
1093 * Makefile.in (check-gdb.%): Restore.
1094 * README: Mention it.
1096 2014-12-13 Joel Brobecker <brobecker@adacore.com>
1098 * gdb.ada/str_uninit: New testcase.
1100 2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1103 * gdb.base/vla-stub-define.c: New file.
1104 * gdb.base/vla-stub.c: New file.
1105 * gdb.base/vla-stub.exp: New file.
1107 2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
1108 Jan Kratochvil <jan.kratochvil@redhat.com>
1109 Tom Tromey <tromey@redhat.com>
1111 * configure.ac: Add gdb.compile/.
1112 * configure: Regenerate.
1113 * gdb.compile/Makefile.in: New file.
1114 * gdb.compile/compile-ops.exp: New file.
1115 * gdb.compile/compile-ops.c: New file.
1116 * gdb.compile/compile-tls.c: New file.
1117 * gdb.compile/compile-tls.exp: New file.
1118 * gdb.compile/compile-constvar.S: New file.
1119 * gdb.compile/compile-constvar.c: New file.
1120 * gdb.compile/compile-mod.c: New file.
1121 * gdb.compile/compile-nodebug.c: New file.
1122 * gdb.compile/compile-setjmp-mod.c: New file.
1123 * gdb.compile/compile-setjmp.c: New file.
1124 * gdb.compile/compile-setjmp.exp: New file.
1125 * gdb.compile/compile-shlib.c: New file.
1126 * gdb.compile/compile.c: New file.
1127 * gdb.compile/compile.exp: New file.
1128 * lib/gdb.exp (skip_compile_feature_tests): New proc.
1130 2014-12-12 Tom Tromey <tromey@redhat.com>
1132 * lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
1133 Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
1135 2014-12-12 Doug Evans <dje@google.com>
1137 * lib/gdb-python.exp (get_python_valueof): New function.
1138 * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.
1140 2014-12-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
1142 * gdb.base/completion.exp: Add test for completion of "info
1145 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
1147 * gdb.base/func-ptrs.c: New file.
1148 * gdb.base/func-ptrs.exp: New file.
1150 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1152 PR breakpoints/17012
1153 * gdb.base/dprintf-detach.c: New file.
1154 * gdb.base/dprintf-detach.exp: New file.
1156 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1158 * gdb.trace/qtro.exp: Replace gdbserver detection code by...
1159 * lib/gdb.exp (target_is_gdbserver): New procedure.
1161 2014-12-08 Doug Evans <dje@google.com>
1163 * gdb.python/py-objfile.exp: Add tests for objfile.owner.
1165 2014-12-05 Yao Qi <yao@codesourcery.com>
1167 * gdb.guile/scm-error.exp: Remove the third argument to
1168 gdb_remote_download.
1169 * gdb.guile/scm-frame-args.exp: Likewise.
1170 * gdb.guile/scm-section-script.exp: Likewise.
1172 2014-12-05 Yao Qi <yao@codesourcery.com>
1174 * gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
1176 2014-12-04 Doug Evans <dje@google.com>
1178 * gdb.python/py-objfile.exp: Add tests for
1179 objfile.add_separate_debug_file.
1181 2014-12-04 Doug Evans <dje@google.com>
1183 * lib/gdb.exp (get_build_id): New function.
1184 (build_id_debug_filename_get): Rewrite to use it.
1185 * gdb.python/py-objfile.exp: Add test for objfile.build_id.
1187 2014-12-04 Maciej W. Rozycki <macro@codesourcery.com>
1189 * gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
1190 `method(long)', not just 0x0.
1191 * gdb.cp/nsalias.exp: Align code labels to 4.
1192 * gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
1193 * gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
1194 * gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
1195 * gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
1196 (cu_text_start, FUNC_lang_start): Use `START_INSNS'.
1197 * gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.
1199 2014-12-02 Doug Evans <dje@google.com>
1202 * gdb.cp/anon-ns.cc: Move guts of this file to ...
1203 * gdb.cp/anon-ns2.cc: ... here. New file.
1204 * gdb.cp/anon-ns.exp: Update.
1206 2014-12-02 Nick Bull <nicholaspbull@gmail.com>
1208 * gdb.python/py-events.py (inferior_call_handler): New.
1209 (register_changed_handler, memory_changed_handler): New.
1210 (test_events.invoke): Register new handlers.
1211 * gdb.python/py-events.exp: Add tests for inferior call,
1212 memory_changed and register_changed events.
1214 2014-12-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1216 * gdb.base/execl-update-breakpoints.exp: Specify the link address
1217 with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
1218 if the linker doesn't understand this.
1220 2014-12-01 Simon Marchi <simon.marchi@ericsson.com>
1222 * gdb.python/python.exp: Change expected reply to help().
1224 2014-12-01 Yao Qi <yao@codesourcery.com>
1226 * configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
1227 AC_CONFIG_SUBDIRS(gdb.gdbtk).
1228 * configure: Re-generated.
1230 2014-11-28 Siva Chandra Reddy <sivachandra@google.com>
1232 * gdb.cp/chained-calls.cc: New file.
1233 * gdb.cp/chained-calls.exp: New file.
1234 * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
1236 2014-11-28 Simon Marchi <simon.marchi@ericsson.com>
1238 * gdb.ada/py_range.exp: Add parentheses to python calls to print.
1239 * gdb.dwarf2/symtab-producer.exp: Same.
1240 * gdb.gdb/python-interrupts.exp: Same.
1241 * gdb.gdb/python-selftest.exp: Same.
1242 * gdb.python/py-linetable.exp: Same.
1243 * gdb.python/py-type.exp: Same.
1244 * gdb.python/py-value-cc.exp: Same.
1245 * gdb.python/py-value.exp: Same.
1247 2014-11-28 Yao Qi <yao@codesourcery.com>
1249 * gdb.base/break-probes.exp: Match library name prefixed with
1252 2014-11-27 Simon Marchi <simon.marchi@ericsson.com>
1254 * gdb.python/py-linetable.exp: Escape properly sorted(fset)
1255 test expected output. Add parentheses for the call to print.
1256 Remove L suffix from integers.
1258 2014-11-26 Doug Evans <dje@google.com>
1260 * gdb.dwarf2/dw2-op-out-param.S: Fix comment.
1262 2014-11-22 Yao Qi <yao@codesourcery.com>
1264 * gdb.trace/entry-values.c: Remove asms.
1265 (foo): Add foo_label.
1266 (bar): Add bar_label.
1267 * gdb.trace/entry-values.exp: Remove code computing foo's
1268 length and bar's length.
1269 (Dwarf::assemble): Invoke function_range for bar and use
1270 MACRO_AT_func for foo.
1272 2014-11-22 Yao Qi <yao@codesourcery.com>
1274 * gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
1275 and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
1276 Use .Lgcc43_procstart instead of gcc43.
1278 2014-11-21 Joel Brobecker <brobecker@adacore.com>
1280 * gdb.ada/n_arr_bound: New testcase.
1282 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
1284 PR breakpoints/10737
1285 * gdb.base/catch-syscall.exp (do_syscall_tests): Call
1286 test_catch_syscall_multi_arch.
1287 (test_catch_syscall_multi_arch): New function.
1289 2014-11-20 Doug Evans <xdje42@gmail.com>
1291 * gdb.base/maint.exp: Update expected output.
1293 2014-11-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
1295 * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
1296 4-byte instruction on S390.
1298 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1300 * gdb.ada/arr_arr: New testcase.
1302 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1304 * gdb.ada/pkd_arr_elem: New Testcase.
1306 2014-11-18 Luis Machado <lgustavo@codesourcery.com>
1308 * gdb.reverse/break-precsave: Expect completion message for
1310 * gdb.reverse/consecutive-precsave.exp: Likewise.
1311 * gdb.reverse/finish-precsave.exp: Likewise.
1312 * gdb.reverse/i386-precsave.exp: Likewise.
1313 * gdb.reverse/machinestate-precsave.exp: Likewise.
1314 * gdb.reverse/sigall-precsave.exp: Likewise.
1315 * gdb.reverse/solib-precsave.exp: Likewise.
1316 * gdb.reverse/step-precsave.exp: Likewise.
1317 * gdb.reverse/until-precsave.exp: Likewise.
1318 * gdb.reverse/watch-precsave.exp: Likewise.
1320 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1322 * gdb.base/bp-permanent.c: Include unistd.h.
1323 * gdb.python/py-framefilter-mi.c (main): Add return type.
1324 * gdb.python/py-framefilter.c (main): Likewise.
1325 * gdb.trace/actions-changed.c (main): Likewise.
1327 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1329 * gdb.mi/until.c: Add eye-catchers.
1330 * gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
1333 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1335 * gdb.base/condbreak.exp: Drop references to removed non-prototype
1336 function header variants in break1.c.
1337 * gdb.base/ena-dis-br.exp: Likewise.
1338 * gdb.base/hbreak2.exp: Likewise.
1339 * gdb.reverse/until-precsave.exp: Drop references to removed
1340 non-prototype function header variants in ur1.c.
1341 * gdb.reverse/until-reverse.exp: Likewise.
1343 2014-11-17 Petr Machata <pmachata@redhat.com>
1345 * lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
1346 ${_cu_offset_size} bytes abbrev offset.
1348 2014-11-15 Doug Evans <xdje42@gmail.com>
1351 * gdb.base/line-symtabs.exp: New file.
1352 * gdb.base/line-symtabs.c: New file.
1353 * gdb.base/line-symtabs.h: New file.
1355 2014-11-14 Yao Qi <yao@codesourcery.com>
1357 * gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
1358 (func): Add label func_label.
1359 * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
1360 Replace low_pc and high_pc with MACRO_AT_range.
1361 Replace name, low_pc and high_pc with MACRO_AT_func.
1363 2014-11-14 Yao Qi <yao@codesourcery.com>
1365 * gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
1366 Replace name, low_pc and high_pc with MACRO_AT_func.
1368 2014-11-14 Yao Qi <yao@codesourcery.com>
1370 * gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
1371 produce debug information.
1372 * gdb.dwarf2/implptr-optimized-out.S: Removed.
1374 2014-11-14 Yao Qi <yao@codesourcery.com>
1376 * gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
1377 object and get function length.
1378 (Dwarf::assemble): Replace name, low_pc and high_pc attributes
1380 (top-level): Replace gdb_compile and clean_restart with
1381 prepare_for_testing.
1382 * gdb.dwarf2/main.c (main): Add label main_label.
1384 2014-11-14 Yao Qi <yao@codesourcery.com>
1386 * lib/dwarf.exp (function_range): New procedure.
1387 (Dwarf::_handle_macro_at_func): New procedure.
1388 (Dwarf::_handle_macro_at_range): New procedure.
1389 (Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
1391 2014-11-14 Yao Qi <yao@codesourcery.com>
1393 * lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
1394 (_handle_attribute): New procedure.
1396 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1398 * gdb.ada/cond_lang/foo.c (callme): Add return type.
1399 * gdb.base/call-sc.c (zed): Likewise.
1400 * gdb.base/checkpoint.c (main): Likewise.
1401 * gdb.base/dump.c (main): Likewise.
1402 * gdb.base/gcore.c (main): Likewise.
1403 * gdb.base/huge.c (main): Likewise.
1404 * gdb.base/multi-forks.c (main): Likewise.
1405 * gdb.base/pr10179-a.c (main): Likewise.
1406 * gdb.base/savedregs.c (main): Likewise.
1407 * gdb.base/sigaltstack.c (main): Likewise.
1408 * gdb.base/siginfo.c (main): Likewise.
1409 * gdb.base/structs.c (zed): Likewise.
1410 * gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
1411 * gdb.mi/mi-syn-frame.c (main): Likewise.
1412 * gdb.mi/until.c (foo, main): Likewise.
1413 * gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
1414 * gdb.base/solib-weak.c (foo): Declare.
1415 * gdb.base/attach-twice.c: Include stdio.h.
1416 * gdb.base/weaklib1.c: Likewise.
1417 * gdb.base/weaklib2.c: Likewise.
1418 * gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
1419 * gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
1421 * gdb.base/attach-pie-misread.c: Include stdlib.h.
1422 * gdb.mi/mi-exit-code.c: Likewise.
1423 * gdb.base/break-interp-lib.c: Include string.h.
1424 * gdb.base/coremaker.c: Likewise.
1425 * gdb.base/testenv.c: Likewise.
1426 * gdb.python/py-finish-breakpoint.c: Likewise.
1427 * gdb.base/inferior-died.c: Include sys/wait.h.
1428 * gdb.base/fileio.c: Include time.h.
1429 * gdb.base/async-shell.c: Include unistd.h.
1430 * gdb.base/dprintf-non-stop.c: Likewise.
1431 * gdb.base/info-os.c: Likewise.
1432 * gdb.mi/mi-console.c: Likewise.
1433 * gdb.mi/watch-nonstop.c: Likewise.
1434 * gdb.python/py-events.c: Likewise.
1435 * gdb.base/async.c (baz): Move up before its invocation.
1436 * gdb.base/code_elim2.c (my_global_func): Likewise.
1437 * gdb.base/skip-solib-lib.c (multiply): Likewise.
1438 * gdb.base/advance.c (func2): Likewise.
1440 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1442 * gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped
1444 * gdb.base/annota3.c: Likewise.
1445 * gdb.base/async.c: Likewise.
1446 * gdb.base/average.c: Likewise.
1447 * gdb.base/call-ar-st.c: Likewise.
1448 * gdb.base/call-rt-st.c: Likewise.
1449 * gdb.base/call-sc.c: Likewise.
1450 * gdb.base/call-strs.c: Likewise.
1451 * gdb.base/ending-run.c: Likewise.
1452 * gdb.base/execd-prog.c: Likewise.
1453 * gdb.base/exprs.c: Likewise.
1454 * gdb.base/foll-exec.c: Likewise.
1455 * gdb.base/foll-fork.c: Likewise.
1456 * gdb.base/foll-vfork.c: Likewise.
1457 * gdb.base/funcargs.c: Likewise.
1458 * gdb.base/gcore.c: Likewise.
1459 * gdb.base/jump.c: Likewise.
1460 * gdb.base/langs0.c: Likewise.
1461 * gdb.base/langs1.c: Likewise.
1462 * gdb.base/langs2.c: Likewise.
1463 * gdb.base/mips_pro.c: Likewise.
1464 * gdb.base/nodebug.c: Likewise.
1465 * gdb.base/opaque0.c: Likewise.
1466 * gdb.base/opaque1.c: Likewise.
1467 * gdb.base/recurse.c: Likewise.
1468 * gdb.base/run.c: Likewise.
1469 * gdb.base/scope0.c: Likewise.
1470 * gdb.base/scope1.c: Likewise.
1471 * gdb.base/setshow.c: Likewise.
1472 * gdb.base/setvar.c: Likewise.
1473 * gdb.base/shmain.c: Likewise.
1474 * gdb.base/shr1.c: Likewise.
1475 * gdb.base/shr2.c: Likewise.
1476 * gdb.base/sigall.c: Likewise.
1477 * gdb.base/signals.c: Likewise.
1478 * gdb.base/so-indr-cl.c: Likewise.
1479 * gdb.base/solib2.c: Likewise.
1480 * gdb.base/structs.c: Likewise.
1481 * gdb.base/sum.c: Likewise.
1482 * gdb.base/vforked-prog.c: Likewise.
1483 * gdb.base/watchpoint.c: Likewise.
1484 * gdb.reverse/shr2.c: Likewise.
1485 * gdb.reverse/until-reverse.c: Likewise.
1486 * gdb.reverse/ur1.c: Likewise.
1487 * gdb.reverse/watch-reverse.c: Likewise.
1489 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1491 * gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
1493 * gdb.base/sepdebug.exp: Drop references to removed code.
1495 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1497 * gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
1498 variant. Preserve original line numbering.
1499 * gdb.base/list1.c: Likewise.
1501 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1503 * gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
1505 * gdb.base/break1.c: Likewise.
1506 * gdb.base/break.exp: Drop references to removed code.
1508 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1510 * gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped
1513 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1515 * gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
1517 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1519 * gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
1520 logic into perform_all_tests() and invoke it with and without
1521 function header prototypes.
1522 (do_function_calls): Remove conditional XFAIL for PR 5318.
1523 (rerun_and_prepare): Remove duplicate code.
1524 (perform_all_tests): New. Main logic moved here.
1526 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1528 * gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
1529 code guarded by #ifdef NO_PROTOTYPES.
1530 (t_double_many_args): Likewise.
1531 (DEF_FUNC_MANY_ARGS_1): Likewise.
1532 (DEF_FUNC_VALUES_1): Likewise.
1533 (t_structs_ldc): Renamed from t_structs_fc in conditional code
1534 guarded by #ifdef PROTOTYPES.
1536 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1538 * gdb.mi/mi-console.c: Add eye-catcher.
1539 * gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
1540 instead of literal line number.
1542 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1544 * gdb.base/shr2.c: Add eye-catcher.
1545 * gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
1548 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1550 * gdb.base/jump.c: Add eye-catchers.
1551 * gdb.base/jump.exp: Refer to eye-catchers instead of literal line
1554 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1556 * gdb.base/execd-prog.c: Add eye-catchers.
1557 * gdb.base/foll-exec.c: Likewise.
1558 * gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
1561 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1563 * gdb.base/ending-run.c: Add eye-catchers.
1564 * gdb.base/ending-run.exp: Refer to eye-catchers instead of
1565 literal line numbers.
1567 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1569 * gdb.base/call-rt-st.c: Add eye-catchers.
1570 * gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
1571 literal line numbers.
1573 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1575 * gdb.base/call-ar-st.c: Add eye-catchers.
1576 * gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
1577 literal line numbers.
1579 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1581 * gdb.base/average.c: Add eye-catchers.
1582 * gdb.base/sum.c: Likewise.
1583 * gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
1584 regexps dynamically.
1586 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1588 * gdb.base/solib1.c: Add eye-catchers.
1589 * gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
1590 literal line numbers.
1592 2014-11-12 Pedro Alves <palves@redhat.com>
1594 * gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
1597 2014-11-12 Pedro Alves <palves@redhat.com>
1599 * gdb.arch/i386-bp_permanent.c: New file.
1600 * gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
1601 (srcfile): Set to i386-bp_permanent.c.
1602 (top level): Adjust to work in both 32-bit and 64-bit modes. Test
1603 that stepi does not execute the 'leave' instruction, instead of
1604 testing it does execute.
1605 * gdb.base/bp-permanent.c: New file.
1606 * gdb.base/bp-permanent.exp: New file.
1608 2014-11-10 Doug Evans <xdje42@gmail.com>
1611 * gdb.base/symtab-search-order.exp: New file.
1612 * gdb.base/symtab-search-order.c: New file.
1613 * gdb.base/symtab-search-order-1.c: New file.
1614 * gdb.base/symtab-search-order-shlib-1.c: New file.
1616 2014-11-07 Pedro Alves <palves@redhat.com>
1619 * gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
1622 2014-11-03 Siva Chandra Reddy <sivachandra@google.com>
1625 * gdb.cp/pr17494.cc: New file.
1626 * gdb.cp/pr17494.exp: New file.
1628 2014-11-02 Yao Qi <yao@codesourcery.com>
1630 * gdb.python/python.exp: Get working directory and match the
1631 output of "set extended-prompt \\w " with it.
1633 2014-10-30 Doug Evans <dje@google.com>
1635 * gdb.python/py-objfile.exp: Add tests for setting random attributes
1637 * gdb.python/py-progspace.exp: Add tests for setting random attributes
1640 2014-10-30 Janis Johnson <janisjo@codesourcery.com>
1642 * gdb.base/fullpath-expand.exp: Skip for a remote host.
1643 * gdb.base/realname-expand.exp: Likewise.
1644 * gdb.linespec/macro-relative.exp: Likewise.
1646 2014-10-29 Pedro Alves <palves@redhat.com>
1649 * gdb.threads/schedlock.c (some_function): New function.
1650 (call_function): New global.
1651 (MAYBE_CALL_SOME_FUNCTION): New macro.
1652 (thread_function): Call it.
1653 * gdb.threads/schedlock.exp (get_args): Add description parameter,
1654 and use it instead of a global counter. Adjust all callers.
1655 (get_current_thread): Use "find current thread" for test message
1656 here rather than having all callers pass down the same string.
1657 (goto_loop): New procedure, factored out from ...
1658 (my_continue): ... this.
1659 (step_ten_loops): Change parameter from test message to command to
1661 (list_count): Delete global.
1662 (check_result): New procedure, factored out from duplicate top
1664 (continue tests): Wrap in with_test_prefix.
1665 (test_step): New procedure, factored out from duplicate top level
1667 (top level): Test "step" in combination with all scheduler-locking
1668 modes. Test "next" in combination with all scheduler-locking
1669 modes, and in combination with stepping over a function call or
1671 * gdb.threads/next-bp-other-thread.c: New file.
1672 * gdb.threads/next-bp-other-thread.exp: New file.
1674 2014-10-29 Pedro Alves <palves@redhat.com>
1677 * gdb.python/python.exp: Test a multi-line command that spawns
1679 * gdb.base/multi-line-starts-subshell.exp: New file.
1681 2014-10-29 Yao Qi <yao@codesourcery.com>
1683 * gdb.base/fileio.exp: Make directories on host.
1685 2014-10-29 Yao Qi <yao@codesourcery.com>
1687 * gdb.base/fileio.c (test_write): Close the file.
1689 2014-10-28 Pedro Alves <palves@redhat.com>
1692 * gdb.base/sigstep.c (no_handler): New global.
1693 (main): If 'no_handler is true, set the signal handlers to
1695 * gdb.base/sigstep.exp (breakpoint_over_handler): Add
1696 with_sw_watch and no_handler parameters. Handle them.
1697 (top level) <stepping over handler when stopped at a breakpoint
1698 test>: Add a test axis for testing with a software watchpoint, and
1699 another for testing with the signal handler set to SIG_IGN.
1700 * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
1701 * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
1703 2014-10-28 Pedro Alves <palves@redhat.com>
1706 * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
1707 * gdb.base/sigstep.exp (other_handler_location): New global.
1708 (advance): Support stepping into the signal handler, and running
1709 commands while in the handler.
1710 (in_handler_map): New global.
1711 (top level): In the advance test, add combinations for getting
1712 into the handler with stepping commands, and for running commands
1713 in the handler. Add comment descripting the advancei tests.
1715 2014-10-28 Pedro Alves <palves@redhat.com>
1717 * gdb.base/sigstep.exp: Use build_executable instead of
1718 prepare_for_testing.
1719 (top level): Move code that starts GDB, runs to main and creates a
1721 (restart): ... this new procedure.
1722 (top level): Move backtrace from signal handler test to ...
1723 (validate_backtrace): ... this new procedure.
1724 (advance, advancei): Rename parameter from 'i' to 'cmd'. Use
1725 with_test_prefix. Always restart GDB.
1726 (skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
1727 with_test_prefix. Always restart GDB. No need to delete
1728 breakpoints after the test.
1729 (test_skip_handler): Remove prefix parameter.
1730 (skip_over_handler, breakpoint_to_handler)
1731 (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
1732 parameter from 'i' to 'cmd'. Use with_test_prefix. Always
1733 restart GDB. No need to delete breakpoints after the test.
1734 (top level): Use foreach to call the test procedures with
1737 2014-10-28 Pedro Alves <palves@redhat.com>
1739 * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
1740 instead of GNATS numbers.
1741 * gdb.base/sigbpt.exp: Likewise.
1742 * gdb.base/siginfo.exp: Likewise.
1743 * gdb.base/sigstep.exp: Likewise.
1745 2014-10-27 Pedro Alves <palves@redhat.com>
1747 * gdb.base/sigstep.c (dummy): New global.
1748 (main): Issue a couple writes to the new global.
1749 * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
1751 (skip_over_handler): Use test_skip_handler.
1752 (top level): Call skip_over_handler for stepi and nexti too.
1753 (breakpoint_over_handler): Use test_skip_handler.
1754 (top level): Call breakpoint_over_handler for stepi and nexti too.
1756 2014-10-27 Yao Qi <yao@codesourcery.com>
1758 * gdb.trace/tfile.c (adjust_function_address)
1759 [__powerpc64__ && _CALL_ELF != 2]: Get function address from
1760 function descriptor.
1762 2014-10-24 Don Breazeal <donb@codesourcery.com>
1764 * gdb.base/foll-fork.exp (test_follow_fork,
1765 catch_fork_child_follow): Check for updated fork messages emitted
1767 * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
1768 vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
1769 vfork_and_exec_child_follow_through_step): Check for updated vfork
1770 messages emitted from infrun.c.
1772 2014-10-24 Pedro Alves <palves@redhat.com>
1774 * gdb.base/corefile.exp: Remove references to ultrix.
1775 * gdb.base/interrupt.exp: Likewise.
1776 * gdb.base/whatis.exp: Likewise.
1777 * gdb.gdb/selftest.exp: Likewise.
1778 * gdb.threads/manythreads.exp: Likewise.
1779 * gdb.threads/print-threads.exp: Likewise.
1780 * gdb.threads/pthreads.exp:: Likewise.
1781 * gdb.threads/schedlock.exp: Likewise.
1783 2014-10-24 Siva Chandra Reddy <sivachandra@google.com>
1785 * gdb.cp/non-trivial-retval.cc: Add a test case.
1786 * gdb.cp/non-trivial-retval.exp: Add a test.
1788 2014-10-20 Yao Qi <yao@codesourcery.com>
1790 * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
1791 * gdb.python/py-objfile-script-gdb.py: New file.
1792 * gdb.python/py-objfile-script.exp: Update reference to
1793 py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
1794 of remote_download. Remove the dest file.
1796 2014-10-20 Yao Qi <yao@codesourcery.com>
1798 * gdb.base/checkpoint.exp: Don't remove file copied on host.
1799 * gdb.base/step-line.exp: Likewise.
1800 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
1801 * gdb.dwarf2/dw2-basic.exp: Likewise.
1802 * gdb.dwarf2/dw2-compressed.exp: Likewise.
1803 * gdb.dwarf2/dw2-filename.exp: Likewise.
1804 * gdb.dwarf2/dw2-intercu.exp: Likewise.
1805 * gdb.dwarf2/dw2-intermix.exp: Likewise.
1806 * gdb.dwarf2/dw2-producer.exp: Likewise.
1807 * gdb.dwarf2/mac-fileno.exp: Likewise.
1808 * gdb.python/py-frame-args.exp: Likewise.
1809 * gdb.python/py-framefilter.exp: Likewise.
1810 * gdb.python/py-mi.exp: Likewise.
1811 * gdb.python/py-objfile-script.exp: Likewise
1812 * gdb.python/py-pp-integral.exp: Likewise.
1813 * gdb.python/py-pp-re-notag.exp: Likewise.
1814 * gdb.python/py-prettyprint.exp: Likewise.
1815 * gdb.python/py-section-script.exp: Likewise.
1816 * gdb.python/py-typeprint.exp: Likewise.
1817 * gdb.python/py-xmethods.exp: Likewise.
1818 * gdb.stabs/weird.exp: Likewise.
1819 * gdb.xml/tdesc-regs.exp: Likewise.
1821 2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
1823 * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
1824 (out_cu): Use addr_len for the size of addresses.
1825 (out_line): Likewise. Size DW_LNE_set_address instruction
1826 according to addr_len.
1827 * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
1828 (FUNC): Add START_INSNS to definition.
1830 2014-10-18 Yao Qi <yao@codesourcery.com>
1832 * gdb.base/argv0-symlink.exp: Check argv[0] value if
1833 gdb_has_argv0 return true.
1834 * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
1835 check [target_info exists noargs], check [gdb_has_argv0]
1837 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
1838 * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
1841 2014-10-17 Doug Evans <dje@google.com>
1843 * gdb.python/py-events.exp: Update expected output for clear_objfiles
1845 * gdb.python/py-events.py: Add clear_objfiles event.
1847 2014-10-17 Doug Evans <dje@google.com>
1849 * gdb.python/py-objfile.exp: Test progspace attribute.
1851 2014-10-17 Luis Machado <lgustavo@codesourcery.com>
1853 * gdb.guile/scm-breakpoint.exp: Do not assume any
1854 directory separators when matching source file paths.
1855 * gdb.python/py-breakpoint.exp: Likewise.
1856 * gdb.reverse/break-precsave.exp: Likewise.
1857 * gdb.reverse/break-reverse.exp: Likewise.
1858 * gdb.reverse/consecutive-precsave.exp: Likewise.
1859 * gdb.reverse/finish-precsave.exp: Likewise.
1860 * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
1861 * gdb.reverse/finish-reverse.exp: Likewise.
1862 * gdb.reverse/i386-precsave.exp: Likewise.
1863 * gdb.reverse/i387-env-reverse.exp: Likewise.
1864 * gdb.reverse/i387-stack-reverse.exp: Likewise.
1865 * gdb.reverse/machinestate-precsave.exp: Likewise.
1866 * gdb.reverse/machinestate.exp: Likewise.
1867 * gdb.reverse/sigall-precsave.exp: Likewise.
1868 * gdb.reverse/solib-precsave.exp: Likewise.
1869 * gdb.reverse/step-precsave.exp: Likewise.
1870 * gdb.reverse/until-precsave.exp: Likewise.
1871 * gdb.reverse/watch-precsave.exp: Likewise.
1872 * gdb.reverse/watch-reverse.exp: Likewise.
1874 2014-10-17 Yao Qi <yao@codesourcery.com>
1876 * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
1877 * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
1879 2014-10-17 Pedro Alves <palves@redhat.com>
1882 * gdb.base/bg-execution-repeat.c: New file.
1883 * gdb.base/bg-execution-repeat.exp: New file.
1885 2014-10-17 Pedro Alves <palves@redhat.com>
1888 * gdb.base/continue-all-already-running.c: New file.
1889 * gdb.base/continue-all-already-running.exp: New file.
1891 2014-10-17 Pedro Alves <palves@redhat.com>
1894 * gdb.base/annota-input-while-running.c: New file.
1895 * gdb.base/annota-input-while-running.exp: New file.
1897 2014-10-17 Pedro Alves <palves@redhat.com>
1899 * gdb.base/callfuncs.exp: emove references to osf.
1900 * gdb.base/sigall.exp: Likewise.
1901 * gdb.gdb/selftest.exp: Likewise.
1902 * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
1903 * gdb.mi/non-stop.c: Likewise.
1904 * gdb.mi/pthreads.c: Likewise.
1905 * gdb.reverse/sigall-precsave.exp: Likewise.
1906 * gdb.reverse/sigall-reverse.exp: Likewise.
1907 * gdb.threads/pthreads.c: Likewise.
1908 * gdb.threads/pthreads.exp: Likewise.
1910 2014-10-17 Yao Qi <yao@codesourcery.com>
1912 * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
1913 check 'target_info exists noargs'.
1914 (test_command_prompt_position): Likewise.
1915 (progvar_simple_if_test): Don't check 'target_info exists noargs'.
1917 (progvar_simple_while_test): Likewise.
1918 (progvar_complex_if_while_test): Likewise.
1919 (if_while_breakpoint_command_test): Likewise.
1920 (infrun_breakpoint_command_test): Likewise.
1921 (breakpoint_command_test): Likewise.
1922 (watchpoint_command_test): Likewise.
1923 (bp_deleted_in_command_test): Likewise.
1924 (temporary_breakpoint_commands): Likewise.
1926 2014-10-16 Yao Qi <yao@codesourcery.com>
1928 * gdb.base/remotetimeout.exp: Remove noargs checking.
1930 2014-10-15 Pedro Alves <palves@redhat.com>
1933 * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
1934 * gdb.base/breakpoint-in-ro-region.exp
1935 (probe_target_hardware_step): New procedure.
1936 (top level): Probe hardware stepping and hardware breakpoint
1937 support. Test stepping through a read-only region, with both
1938 "breakpoint auto-hw" on and off and both "always-inserted" on and
1941 2014-10-15 Iain Buclaw <ibuclaw@gdcproject.org>
1943 * gdb.dlang/demangle.exp: Update for demangling changes.
1945 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
1947 * gdb.cp/non-trivial-retval.cc: Add new test cases.
1948 * gdb.cp/non-trivial-retval.exp: Add new tests.
1950 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
1954 * gdb.cp/non-trivial-retval.cc: New file.
1955 * gdb.cp/non-trivial-retval.exp: New file.
1957 2014-10-15 Yao Qi <yao@codesourcery.com>
1959 * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
1962 2014-10-15 Yao Qi <yao@codesourcery.com>
1964 * gdb.python/py-symbol.exp: Match file base name if host is
1965 remote, otherwise match file name with dir name.
1966 * gdb.python/py-symtab.exp: Likewise.
1967 * gdb.python/python.exp: Likewise.
1969 2014-10-15 Yao Qi <yao@codesourcery.com>
1971 * gdb.python/py-symbol.exp: Remove trailing ".*" in the
1973 * gdb.python/py-symtab.exp: Likewise.
1974 * gdb.python/python.exp: Remove trailing ".*". Fix typo
1977 2014-10-14 Joel Brobecker <brobecker@adacore.com>
1979 * gdb.ada/addr_arith: New testcase.
1981 2014-10-14 Maciej W. Rozycki <macro@codesourcery.com>
1983 * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
1984 * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
1985 * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
1986 * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
1988 2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
1990 * gdb.arch/stap-eval-lang-ada.S: Likewise.
1991 * gdb.arch/stap-eval-lang-ada.c: Likewise.
1992 * gdb.arch/stap-eval-lang-ada.exp: New file.
1994 2014-10-14 Yao Qi <yao@codesourcery.com>
1996 * gdb.mi/mi-var-child.c (nothing1): New function.
1997 (nothing2): New function.
1998 (do_children_tests): Set function pointers by nothing1 and
2000 * gdb.mi/mi-var-child.exp: Step over new added statements.
2001 Update test to match the new output.
2002 * gdb.mi/var-cmd.c (nothing1): New function.
2003 (nothing2): New function.
2004 (do_children_tests): Set function pointers by nothing1 and
2006 * gdb.mi/mi-var-display.exp: Update test to match output.
2007 Step to the line specified by $line_dct_nothing.
2008 Increase the number of lines to step.
2010 2014-10-14 Yao Qi <yao@codesourcery.com>
2012 * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
2014 * gdb.mi/mi2-var-child.exp: Likewise.
2016 2014-10-13 Doug Evans <dje@google.com>
2018 * gdb.python/py-objfile.exp: Change name of file name test.
2020 2014-10-13 Doug Evans <dje@google.com>
2022 * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
2023 from the start of the CU.
2025 2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2026 Yao Qi <yao@codesourcery.com>
2028 Fix "save breakpoints" for "catch" command.
2029 * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
2030 Remove -nonewline. Match also the added "main" line.
2032 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2034 Fix "save breakpoints" for "disable $bpnum" command.
2035 * gdb.base/save-bp.c (main): Add label.
2036 * gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
2038 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2040 * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
2042 2014-10-11 Yao Qi <yao@codesourcery.com>
2044 * gdb.server/server-kill.exp: Execute command
2045 "set remote trace-status-packet on" before "tstatus".
2047 2014-10-11 Yao Qi <yao@codesourcery.com>
2049 * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
2050 (main): Call getppid.
2051 * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
2052 and continue to it. Read variable "server_pid".
2054 2014-10-11 Yao Qi <yao@codesourcery.com>
2056 * gdb.server/server-kill.exp: Remove "delete_breakpoints".
2058 2014-10-11 Yao Qi <yao@codesourcery.com>
2060 * gdb.threads/thread-find.exp: Don't execute command
2062 * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
2063 * gdb.threads/linux-dp.exp: Don't check the condition
2064 $threads_created equals to zero.
2066 2014-10-10 Pedro Alves <palves@redhat.com>
2068 * gdb.base/bigcore.exp: Remove references to IRIX.
2069 * gdb.base/funcargs.exp: Likewise.
2070 * gdb.base/interrupt.exp: Likewise.
2071 * gdb.base/mips_pro.exp: Likewise.
2072 * gdb.base/nodebug.exp: Likewise.
2073 * gdb.base/setvar.exp: Likewise.
2074 * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2076 2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2077 Pedro Alves <palves@redhat.com>
2080 * gdb.base/vdso-warning.c: New file.
2081 * gdb.base/vdso-warning.exp: New file.
2083 2014-10-02 Doug Evans <dje@google.com>
2085 * gdb.base/structs.c (main): Don't run forever.
2087 2014-10-02 Pedro Alves <palves@redhat.com>
2089 * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
2090 (top level) <stop threads 1, stop threads 2>: Use it.
2092 2014-10-02 Pedro Alves <palves@redhat.com>
2094 * gdb.threads/break-while-running.exp (test): Add new
2095 'update_thread_list' argument. Skip "info threads" if false.
2096 (top level): Add new 'update_thread_list' axis.
2098 2014-10-02 Pedro Alves <palves@redhat.com>
2100 PR breakpoints/17431
2101 * gdb.base/execl-update-breakpoints.c: New file.
2102 * gdb.base/execl-update-breakpoints.exp: New file.
2104 2014-10-01 Pedro Alves <palves@redhat.com>
2106 * gdb.base/breakpoint-in-ro-region.c: New file.
2107 * gdb.base/breakpoint-in-ro-region.exp: New file.
2109 2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
2111 * gdb.mi/mi-exit-code.exp: New file.
2112 * gdb.mi/mi-exit-code.c: New file.
2114 2014-09-30 Yao Qi <yao@codesourcery.com>
2116 * lib/prelink-support.exp (build_executable_own_libs): Error if
2117 the target isn't native.
2119 2014-09-30 Yao Qi <yao@codesourcery.com>
2121 * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
2124 2014-09-22 Pedro Alves <palves@redhat.com>
2126 * gdb.threads/break-while-running.exp: New file.
2127 * gdb.threads/break-while-running.c: New file.
2129 2014-09-19 Yao Qi <yao@codesourcery.com>
2131 * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
2132 Invoke test. Restart GDB with --readnow and invoke test again.
2134 2014-09-19 Yao Qi <yao@codesourcery.com>
2136 * gdb.base/break-on-linker-gcd-function.exp: Move test into new
2137 proc set_breakpoint_on_gcd_function. Invoke
2138 set_breakpoint_on_gcd_function. Restart GDB with --readnow and
2139 invoke set_breakpoint_on_gcd_function again.
2141 2014-09-18 Doug Evans <dje@google.com>
2143 * gdb.dwarf2/symtab-producer.exp: New file.
2145 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2147 * gdb.base/global-var-nested-by-dso-solib1.c: New file.
2148 * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
2149 * gdb.base/global-var-nested-by-dso.c: Likewise.
2150 * gdb.base/global-var-nested-by-dso.exp: Likewise.
2152 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2153 Pedro Alves <palves@redhat.com>
2155 * gdb.base/watch-bitfields.exp: Pass string other than test file
2156 name to prepare_for_testing.
2157 (watch): New procedure.
2158 (expect_watchpoint): Use with_test_prefix.
2159 (top level): Factor out tests to ...
2160 (test_watch_location, test_regular_watch): ... these new
2161 procedures, and use with_test_prefix and gdb_continue_to_end.
2163 2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
2165 PR breakpoints/12526
2166 * gdb.base/watch-bitfields.exp: New file.
2167 * gdb.base/watch-bitfields.c: New file.
2169 2014-09-16 Pedro Alves <palves@redhat.com>
2171 * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
2172 software and hardware addresses, not software address against
2175 2014-09-16 Pedro Alves <palves@redhat.com>
2177 * gdb.base/watchpoint-stops-at-right-insn.c: New file.
2178 * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
2180 2014-09-16 Pedro Alves <palves@redhat.com>
2182 * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
2184 * gdb.base/a2-run.exp: Remove all code guarded by istarget
2185 "*-*-vxworks*" throughout.
2186 * gdb.base/break.exp: Likewise.
2187 * gdb.base/default.exp: Likewise.
2188 * gdb.base/scope.exp: Likewise.
2189 * gdb.base/sepdebug.exp: Likewise.
2190 * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
2192 * gdb.base/run.c: Likewise.
2193 * gdb.base/sepdebug.c: Likewise.
2194 * gdb.hp/gdb.aCC/run.c: Likewise.
2195 * gdb.reverse/until-reverse.c: Likewise.
2196 * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
2198 2014-09-16 Yao Qi <yao@codesourcery.com>
2200 * boards/local-remote-host-native.exp: New file.
2202 2014-09-14 Doug Evans <xdje42@gmail.com>
2204 * gdb.threads/queue-signal.c (thread_count): New variable.
2205 (thread_count_mutex, thread_count_condvar): New variables.
2206 (incr_thread_count, wait_all_threads_running): New functions.
2207 (main): Wait for all threads to be in their thread functions.
2209 2014-09-13 Doug Evans <xdje42@gmail.com>
2211 * gdb.threads/queue-signal.c: New file.
2212 * gdb.threads/queue-signal.exp: New file.
2214 2014-09-13 Doug Evans <xdje42@gmail.com>
2216 * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
2217 be consistent with what default_gdb_init uses.
2218 (with_gdb_prompt): Change form of PROMPT argument from a regexp to
2219 the plain text of the prompt. Add some logging printfs.
2220 * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
2222 2014-09-12 Pedro Alves <palves@redhat.com>
2224 * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
2225 gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
2226 * gdb.arch/i386-size-overlap.exp: Likewise.
2227 * gdb.arch/i386-size.exp: Likewise.
2228 * gdb.arch/i386-unwind.exp: Likewise.
2229 * gdb.base/a2-run.exp: Likewise.
2230 * gdb.base/break.exp: Likewise.
2231 * gdb.base/charset.exp: Likewise.
2232 * gdb.base/chng-syms.exp: Likewise.
2233 * gdb.base/commands.exp: Likewise.
2234 * gdb.base/dbx.exp: Likewise.
2235 * gdb.base/find.exp: Likewise.
2236 * gdb.base/funcargs.exp: Likewise.
2237 * gdb.base/jit-simple.exp: Likewise.
2238 * gdb.base/reread.exp: Likewise.
2239 * gdb.base/sepdebug.exp: Likewise.
2240 * gdb.base/step-bt.exp: Likewise.
2241 * gdb.cp/mb-inline.exp: Likewise.
2242 * gdb.cp/mb-templates.exp: Likewise.
2243 * gdb.objc/basicclass.exp: Likewise.
2244 * gdb.threads/killed.exp: Likewise.
2246 2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2249 * gdb.arch/powerpc-stackless.S: New file.
2250 * gdb.arch/powerpc-stackless.exp: New file.
2252 2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2254 * gdb.base/attach.c: Include unistd.h.
2255 (main): Call alarm. Add label postloop.
2256 * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
2257 gdb_breakpoint, gdb_continue_to_breakpoint.
2258 (test_command_line_attach_run): Kill ${testpid} in one exit path.
2260 2014-09-11 Pedro Alves <palves@redhat.com>
2263 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
2264 * gdb.base/attach.exp (test_command_line_attach_run): New
2266 (top level): Call it.
2268 2014-09-11 Pedro Alves <palves@redhat.com>
2270 * lib/gdb.exp (spawn_wait_for_attach): New procedure.
2271 * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
2272 (do_command_attach_tests): Use spawn_wait_for_attach.
2273 * gdb.base/solib-overlap.exp: Likewise.
2274 * gdb.multi/multi-attach.exp: Likewise.
2275 * gdb.python/py-prompt.exp: Likewise.
2276 * gdb.python/py-sync-interp.exp: Likewise.
2277 * gdb.server/ext-attach.exp: Likewise.
2279 2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
2281 * gdb.fortran/array-element.exp: Remove unexpected "continue"
2282 command in testcase. Simplify testcase.
2284 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2286 * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
2288 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2290 * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
2292 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2294 * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
2296 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2298 * gdb.dwarf2/dynarr-ptr.c: New file.
2299 * gdb.dwarf2/dynarr-ptr.exp: New file.
2301 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2303 * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
2304 of 30 rather than hardcoding 120 for a slow test case. Take the
2305 `gdb,timeout' target setting into account for this calculation.
2306 Don't extend the timeout for the test cases that don't need it.
2308 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2310 * gdb.reverse/sigall-reverse.exp: Increase the timeout by
2311 a factor of 2 for a slow test case. Take the `gdb,timeout'
2312 target setting into account for this calculation.
2313 * gdb.reverse/until-precsave.exp: Increase the timeout by
2314 a factor of 15 and 3 respectively rather than adding 120
2315 for a pair of slow test cases. Take the `gdb,timeout'
2316 target setting into account for this calculation.
2318 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2320 * lib/gdb.exp (gdb_test_multiple): Remove code to select the
2321 timeout, don't pass one down to gdb_expect.
2322 (gdb_expect): Rework timeout selection.
2324 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2326 * lib/gdbserver-support.exp (gdbserver_start): Throw an error
2327 exception on timeout.
2328 (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
2329 (gdbserver_start_extended): Catch any `gdbserver_start' error
2331 (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
2332 * lib/mi-support.exp (mi_gdb_target_load): Catch any
2333 `gdbserver_gdb_load' error exceptions.
2335 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2337 * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
2338 120 on waiting for the TCP socket to open.
2340 2014-09-09 Doug Evans <xdje42@gmail.com>
2342 * gdb.base/default.exp (show_conv_list): Add _caller_is,
2343 _caller_matches, _any_caller_is, _any_caller_matches.
2345 2014-09-09 Doug Evans <xdje42@gmail.com>
2347 * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
2349 2014-09-09 Yao Qi <yao@codesourcery.com>
2351 * gdb.mi/mi-var-display.exp: Set print symbol off.
2353 2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
2356 * gdb.base/commands.exp: Add tests to verify user-defined
2357 commands with empty bodies.
2358 * gdb.python/py-cmd.exp: Test that we don't show user-defined
2359 python commands in `show user command`.
2360 * gdb.python/scm-cmd.exp: Test that we don't show user-defined
2361 scheme commands in `show user command`.
2363 2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2366 * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
2367 * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
2368 * gdb.python/py-framefilter-invalidarg.exp: New file.
2369 * gdb.python/py-framefilter-invalidarg.py: New file.
2371 2014-09-06 Doug Evans <xdje42@gmail.com>
2374 * gdb.python/py-caller-is.c: New file.
2375 * gdb.python/py-caller-is.exp: New file.
2377 2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
2380 * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
2381 * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
2383 2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
2386 * gdb.fortran/print-formatted.exp: New file.
2387 * gdb.fortran/print-formatted.f90: Likewise.
2389 2014-09-03 Sasha Smundak <asmundak@google.com>
2391 * gdb.python/py-frame.exp: Test Frame.read_register.
2393 2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
2396 * gdb.python/py-completion.exp: New file.
2397 * gdb.python/py-completion.py: Likewise.
2399 2014-08-28 Doug Evans <dje@google.com>
2401 * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
2402 eax,etc. are live with values set by gdb and thus the compiler can't
2404 * gdb.arch/i386-pseudo.c (main): Ditto.
2406 2014-08-27 Doug Evans <dje@google.com>
2408 * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
2410 2014-08-25 Doug Evans <dje@google.com>
2412 * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
2415 2014-08-25 Doug Evans <dje@google.com>
2417 * gdb.threads/thread-execl.exp: #include <stdio.h>.
2419 2014-08-24 Yao Qi <yao@codesourcery.com>
2421 * gdb.guile/scm-value.exp (test_lazy_strings): Set print
2423 * gdb.python/py-value.exp (test_lazy_strings): Likewise.
2425 2014-08-22 Doug Evans <dje@google.com>
2428 * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
2429 * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
2430 * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
2432 2014-08-22 Yao Qi <yao@codesourcery.com>
2434 * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
2435 * gdb.python/py-finish-breakpoint2.exp: Likewise.
2436 * gdb.python/python.exp: Likewise. Use .py file on the host
2437 instead of the build.
2439 2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2441 * gdb.threads/gcore-stale-thread.c: New file.
2442 * gdb.threads/gcore-stale-thread.exp: New file.
2444 2014-08-21 Pedro Alves <palves@redhat.com>
2446 * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
2447 * gdb.base/gcore-relro-pie.exp: Likewise.
2448 * gdb.base/gcore-relro.exp: Likewise.
2449 * gdb.base/gcore.exp: Likewise.
2450 * gdb.base/print-symbol-loading.exp: Likewise.
2451 * gdb.threads/gcore-thread.exp: Likewise.
2452 * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
2454 2014-08-20 Pedro Alves <palves@redhat.com>
2455 Jan Kratochvil <jan.kratochvil@redhat.com>
2457 * Makefile.in (EXTRA_RULES, CC): New variables, get from
2459 (EXPECT): Handle READ1 being set.
2460 (all): Depend on EXTRA_RULES.
2461 (check-read1, expect-read1, read1.so, read1): New rules.
2462 * README (Testsuite Parameters): Document the READ1 make variable.
2463 (Race detection): New section.
2464 * configure: Regenerate.
2465 * configure.ac: If build==host==target, and running under a
2466 GNU/glibc system, add read1 to the extra Makefile rules.
2467 (EXTRA_RULES): AC_SUBST it.
2468 * lib/read1.c: New file.
2470 2014-08-20 Joel Brobecker <brobecker@adacore.com>
2472 * gdb.dwarf2/data-loc.exp: Add additional tests exercising
2473 the handling of variables declared as a typedef to an array
2474 which a DW_AT_data_location attribute.
2476 2014-08-19 Andrew Burgess <aburgess@broadcom.com>
2477 Pedro Alves <palves@redhat.com>
2481 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
2484 2014-08-19 Pedro Alves <palves@redhat.com>
2486 * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
2488 2014-08-19 Yao Qi <yao@codesourcery.com>
2490 * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
2493 2014-08-18 David Blaikie <dblaikie@gmail.com>
2495 * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
2497 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2499 * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
2500 attribute in array range.
2502 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2504 * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
2506 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2509 * gdb.cp/pr17132.cc: New file.
2510 * gdb.cp/pr17132.exp: New file.
2512 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2514 * gdb.python/py-xmethods.py (A_getarrayind)
2515 (E_method_char_worker.__call__, E_method_int_worker.__call__):
2516 Use 'print' with function call syntax.
2517 (E_method_matcher.match): Fix tab vs space indentation mixup.
2519 2014-08-15 Yao Qi <yao@codesourcery.com>
2521 * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
2524 2014-08-15 Yao Qi <yao@codesourcery.com>
2526 * gdb.cp/casts.exp: Set print symbol off.
2527 * gdb.cp/class2.exp: Likewise.
2528 * gdb.cp/overload.exp: Likewise.
2529 * gdb.cp/templates.exp: Likewise.
2531 2014-08-11 Doug Evans <dje@google.com>
2533 * gdb.base/print-symbol-loading.exp (test_load_core): Update.
2534 (test_load_shlib): Update.
2536 2014-08-09 Yao Qi <yao@codesourcery.com>
2538 * gdb.base/display.exp: Invoke is_address_zero_readable.
2539 * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
2540 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
2541 * gdb.base/hbreak-unmapped.exp: Return if
2542 is_address_zero_readable returns true.
2543 * gdb.base/signest.exp: Likewise.
2544 * gdb.base/signull.exp: Likewise.
2545 * gdb.base/sigbpt.exp: Likewise.
2546 * gdb.guile/scm-disasm.exp: Do the test if
2547 is_address_zero_readable returns false.
2548 * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
2549 * gdb.python/py-arch.exp: Likewise.
2550 * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
2551 * lib/gdb.exp (is_address_zero_readable): New proc.
2553 2014-08-09 Yao Qi <yao@codesourcery.com>
2556 * gdb.mi/mi-var-display.exp: Make test messages unique.
2558 2014-08-04 Tom Tromey <tromey@redhat.com>
2560 * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
2563 2014-08-04 Tom Tromey <tromey@redhat.com>
2565 * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
2568 2014-08-01 Joel Brobecker <brobecker@adacore.com>
2570 * gdb.base/vla-datatypes.c (vla_factory): Add new variable
2571 inner_vla_struct_object_size.
2572 * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
2575 2014-07-30 Pedro Alves <palves@redhat.com>
2577 * gdb.threads/signal-command-handle-nopass.exp (test): Add
2580 2014-07-29 Yao Qi <yao@codesourcery.com>
2583 * gdb.base/until-nodebug.exp: New.
2585 2014-07-28 Doug Evans <xdje42@gmail.com>
2588 * gdb.guile/scm-parameter.exp: Add tests for trying to create
2589 previously existing parameter, and previously ambiguously spelled
2592 2014-07-28 Will Newton <will.newton@linaro.org>
2594 * gdb.base/varargs.exp: Remove KFAILs for ARM.
2596 2014-07-26 Ludovic Courtès <ludo@gnu.org>
2597 Doug Evans <xdje42@gmail.com>
2600 * gdb.guile/types-module.exp: Add tests for wrong type arguments.
2602 2014-07-25 Pedro Alves <palves@redhat.com>
2604 * gdb.threads/signal-command-handle-nopass.c: New file.
2605 * gdb.threads/signal-command-handle-nopass.exp: New file.
2606 * gdb.threads/signal-command-multiple-signals-pending.c: New file.
2607 * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
2608 * gdb.threads/signal-delivered-right-thread.c: New file.
2609 * gdb.threads/signal-delivered-right-thread.exp: New file.
2611 2014-07-25 Pedro Alves <palves@redhat.com>
2613 * gdb.base/double-prompt-target-event-error.exp
2614 (cancel_pagination_in_target_event): Remove '-notransfer <return>'
2616 (cancel_pagination_in_target_event): Rework double prompt
2618 * gdb.base/paginate-after-ctrl-c-running.exp
2619 (test_ctrlc_while_target_running_paginates): Remove '-notransfer
2621 * gdb.base/paginate-bg-execution.exp
2622 (test_bg_execution_pagination_return)
2623 (test_bg_execution_pagination_cancel): Remove '-notransfer
2625 * gdb.base/paginate-execution-startup.exp
2626 (test_fg_execution_pagination_return)
2627 (test_fg_execution_pagination_cancel): Remove '-notransfer
2629 * gdb.base/paginate-inferior-exit.exp
2630 (test_paginate_inferior_exited): Remove '-notransfer <return>'
2632 * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
2633 * lib/gdb.exp (pagination_prompt): Run text through
2635 (gdb_test_multiple): Match $pagination_prompt instead of
2637 (string_to_regexp): Move to lib/gdb-utils.exp.
2639 2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2641 * gdb.arch/amd64-entry-value-paramref.S: New file.
2642 * gdb.arch/amd64-entry-value-paramref.cc: New file.
2643 * gdb.arch/amd64-entry-value-paramref.exp: New file.
2644 * gdb.arch/amd64-optimout-repeat.S: New file.
2645 * gdb.arch/amd64-optimout-repeat.c: New file.
2646 * gdb.arch/amd64-optimout-repeat.exp: New file.
2648 2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
2651 * gdb.base/statistics.exp: New file.
2653 2014-07-17 Doug Evans <dje@google.com>
2656 * gdb.base/maint.exp: Update testing of per-command stats.
2658 2014-07-16 Pedro Alves <palves@redhat.com>
2660 * gdb.trace/tfile.c: Include unistd.h and stdint.h.
2661 (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
2662 (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
2663 (tfile_write_buf): New functions.
2664 (add_memory_block): Rewrite using the above.
2665 (adjust_function_address): New function.
2666 (FUNCTION_ADDRESS): New macro.
2667 (write_basic_trace_file): Remove short_x local, and use
2668 tfile_write_16. Change type of func_addr local to unsigned long
2669 long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
2670 here. Cast argument of add_memory_block to char pointer.
2671 (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
2672 (main): Remove parameters.
2673 * gdb.trace/tfile.exp: Remove nowarnings.
2675 2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
2677 * gdb.base/debug-expr.exp: Test string evaluation with
2678 "debug expression" on.
2680 2014-07-15 Pedro Alves <palves@redhat.com>
2682 * gdb.base/reread.exp: Use clean_restart.
2684 2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
2686 * gdb.arch/avr-flash-qualifer.c: New.
2687 * gdb.arch/avr-flash-qualifer.exp: New.
2689 2014-07-14 Pedro Alves <palves@redhat.com>
2691 * gdb.base/paginate-after-ctrl-c-running.c: New file.
2692 * gdb.base/paginate-after-ctrl-c-running.exp: New file.
2694 2014-07-14 Pedro Alves <palves@redhat.com>
2696 * gdb.base/double-prompt-target-event-error.c: New file.
2697 * gdb.base/double-prompt-target-event-error.exp: New file.
2699 2014-07-14 Pedro Alves <palves@redhat.com>
2702 * gdb.base/paginate-inferior-exit.c: New file.
2703 * gdb.base/paginate-inferior-exit.exp: New file.
2705 2014-07-14 Pedro Alves <palves@redhat.com>
2708 * gdb.base/paginate-bg-execution.c: New file.
2709 * gdb.base/paginate-bg-execution.exp: New file.
2711 2014-07-14 Pedro Alves <palves@redhat.com>
2714 * gdb.base/paginate-execution-startup.c: New file.
2715 * gdb.base/paginate-execution-startup.exp: New file.
2716 * lib/gdb.exp (pagination_prompt): New global.
2717 (default_gdb_spawn): New procedure, factored out from
2719 (default_gdb_start): Adjust to call default_gdb_spawn.
2720 (gdb_spawn): New procedure.
2722 2014-07-14 Pedro Alves <palves@redhat.com>
2724 * lib/gdb.exp (gdb_assert): New procedure.
2725 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
2727 2014-07-14 Pedro Alves <palves@redhat.com>
2729 * gdb.base/execution-termios.c: New file.
2730 * gdb.base/execution-termios.exp: New file.
2732 2014-07-14 Tom Tromey <tromey@redhat.com>
2734 * gdb.cp/vla-cxx.cc: New file.
2735 * gdb.cp/vla-cxx.exp: New file.
2737 2014-07-14 Tom Tromey <tromey@redhat.com>
2739 * gdb.reverse/rerun-prec.c: New file.
2740 * gdb.reverse/rerun-prec.exp: New file.
2742 2014-07-12 Maciej W. Rozycki <macro@mips.com>
2743 Maciej W. Rozycki <macro@codesourcery.com>
2745 * lib/gdb-utils.exp: New file.
2746 * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
2747 inline `gdb_init_command' processing.
2748 (gdb_start_cmd): Likewise.
2749 * lib/mi-support.exp (mi_run_cmd): Likewise.
2750 * README: Document `gdb_init_command' and `gdb_init_commands'.
2752 2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
2754 Fix false FAIL running under a very long directory name.
2755 * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
2756 and "set print elements 10000". Twice.
2758 2014-07-11 Yao Qi <yao@codesourcery.com>
2760 * gdb.base/exprs.exp: "set print symbol off".
2762 2014-07-11 Pedro Alves <palves@redhat.com>
2764 * gdb.threads/kill.c: New file.
2765 * gdb.threads/kill.exp: New file.
2767 2014-07-10 Yao Qi <yao@codesourcery.com>
2769 * gdb.trace/tfile.c (write_basic_trace_file)
2770 [__thumb__||__thumb2__]: Clear the Thumb bit of the function
2771 address written to trace file.
2773 2014-07-09 Pedro Alves <palves@redhat.com>
2775 * gdb.base/attach-wait-input.exp: New file.
2776 * gdb.base/attach-wait-input.c: New file.
2778 2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
2780 * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
2781 setting up test structures.
2782 (main): Call new test function.
2783 * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
2784 test function, continue into test function and walk test
2787 2014-07-02 Yao Qi <yao@codesourcery.com>
2789 * gdb.trace/entry-values.c: Define labels 'foo_start' and
2790 'bar_start' at the beginning of functions 'foo' and 'bar'
2792 * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
2793 instead of 'foo' and 'bar'.
2795 2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
2797 * gdb.btrace/segv.exp: New.
2798 * gdb.btrace/segv.c: New.
2800 2014-07-02 Luis Machado <lgustavo@codesourcery.com>
2802 * gdb.trace/entry-values.exp: Handle powerpc-specific branch
2805 2014-06-30 Mark Wielaard <mjw@redhat.com>
2807 * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
2808 vulture, vilify, villar): New volatile array constants.
2809 (vindictive, vegetation): New const volatile array constants.
2810 * gdb.base/volatile.exp: Test volatile and const volatile array
2813 2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
2815 * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
2816 target lacks support for awatch, rwatch, or hbreak.
2818 2014-06-27 Yao Qi <yao@codesourcery.com>
2820 * gdb.multi/dummy-frame-restore.exp: New.
2821 * gdb.multi/dummy-frame-restore.c: New.
2823 2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
2825 * gdb.btrace/gcore.exp: New.
2827 2014-06-23 Pedro Alves <palves@redhat.com>
2829 * gdb.base/watchpoint-reuse-slot.c: New file.
2830 * gdb.base/watchpoint-reuse-slot.exp: New file.
2832 2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
2834 * gdb.python/py-xmethods.exp: Use "progspace" instead of the
2835 progspace's filename in 'info', 'enable' and 'disable' command
2838 2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
2840 * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
2841 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
2842 * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
2844 2014-06-20 Gary Benson <gbenson@redhat.com>
2846 * gdb.arch/i386-avx.exp: Fix include file location.
2847 * gdb.arch/i386-sse.exp: Likewise.
2849 2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
2851 * gdb.dlang/expression.exp: New file.
2853 2014-06-19 Pedro Alves <palves@redhat.com>
2855 * gdb.threads/thread-execl.exp (do_test): New procedure, factored
2857 (top level): ... here. Iterate running tests under different
2858 scheduler-locking settings.
2860 2014-06-18 Luis Machado <lgustavo@codesourcery.com>
2862 * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
2863 to DW_FORM_addr and use non-zero addresses.
2865 2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
2868 * gdb.python/py-xmethods.cc: Add global function call counters and
2869 increment them in their respective functions. Remove "cout"
2871 * gdb.python/py-xmethods.exp: Make tests check the global function
2872 call counters instead of depending on inferior IO.
2874 2014-06-18 Don Breazeal <donb@codesourcery.com>
2876 * gdb.base/foll-fork.exp (default_fork_parent_follow):
2878 (explicit_fork_parent_follow): Deleted procedure.
2879 (explicit_fork_child_follow): Deleted procedure.
2880 (test_follow_fork): New procedure.
2881 (do_fork_tests): Replace calls to deleted procedures with
2882 calls to test_follow_fork and reset GDB for subsequent
2885 2014-06-17 Yao Qi <yao@codesourcery.com>
2887 * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
2890 2014-06-17 Luis Machado <lgustavo@codesourcery.com>
2892 * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
2893 Initialize ptr and S explicitly.
2894 (skip_type_update_when_not_use_rtti_test): Likewise.
2896 2014-06-16 Keith Seitz <keiths@redhat.com>
2899 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
2900 the inferior is started.
2902 2014-06-16 Pedro Alves <palves@redhat.com>
2904 * gdb.base/break-main-file-remove-fail.c: New file.
2905 * gdb.base/break-main-file-remove-fail.exp: New file.
2906 * gdb.base/break-unload-file.exp: Use build_executable instead of
2907 prepare_for_testing.
2908 (test_break): New parameter "initial_load". Handle it.
2909 (top level): Add initial_load cmdline/file axis.
2911 2014-06-12 Tom Tromey <tromey@redhat.com>
2913 * gdb.base/completion.exp: Don't use directory name in test.
2915 2014-06-09 Gary Benson <gbenson@redhat.com>
2917 * gdb.base/sigall.c [Functions to send signals]: Reorder to
2918 separate the always-available ANSI-standard signals from the
2919 signals that require checking.
2921 * gdb.reverse/sigall-reverse.c [Functions to send signals]:
2925 2014-06-07 Keith Seitz <keiths@redhat.com>
2929 * gdb.cp/var-tag.cc: New file.
2930 * gdb.cp/var-tag.exp: New file.
2931 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
2932 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
2933 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
2934 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
2936 2014-06-06 Doug Evans <xdje42@gmail.com>
2938 * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
2940 2014-06-06 Pedro Alves <palves@redhat.com>
2942 * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
2943 in target debug output instead of looking at RSP packets,
2944 disabling the test on any target that uses hardware stepping.
2947 2014-06-06 Pedro Alves <palves@redhat.com>
2949 * gdb.base/break-unload-file.exp: Fix typo.
2951 2014-06-06 Yao Qi <yao@codesourcery.com>
2953 * gdb.base/jit.exp (one_jit_test): Restrict the pattern
2954 from "jit_function" to "^jit_function".
2956 2014-06-06 Yao Qi <yao@codesourcery.com>
2958 * gdb.base/async.c (foo): Add one statement.
2959 * gdb.base/async.exp: Get the next instruction address and
2960 match the output of "nexti" by instruction address. Match
2961 the hex address in the output of "finish".
2963 2014-06-06 Gary Benson <gbenson@redhat.com>
2965 * gdb.base/call-signals.c: Remove preprocessor conditionals
2966 for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
2967 SIGSEGV and SIGTERM.
2968 * gdb.base/sigall.c: Likewise.
2969 * gdb.base/unwindonsignal.c: Likewise.
2970 * gdb.reverse/sigall-reverse.c: Likewise.
2972 2014-06-06 Yao Qi <yao@codesourcery.com>
2974 * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
2975 readable, skip the test.
2977 2014-06-06 Yao Qi <yao@codesourcery.com>
2979 * gdb.threads/staticthreads.c (thread_function): Move the line
2980 setting breakpoint on forward.
2981 * gdb.threads/staticthreads.exp: Update comments.
2983 2014-06-05 Ludovic Courtès <ludo@gnu.org>
2985 * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
2986 "history-append! type error".
2988 2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
2990 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
2991 erroneous dprintf expected input.
2993 2014-06-04 Doug Evans <xdje42@gmail.com>
2995 * gdb.guile/scm-generics.exp: Delete.
2997 2014-06-04 Doug Evans <xdje42@gmail.com>
2999 * gdb.guile/scm-breakpoint.exp: Update.
3000 Add tests for breakpoint registration.
3002 2014-06-04 Tom Tromey <tromey@redhat.com>
3004 * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
3006 * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
3007 inner_vla_struct, vla_union types. Initialize objects of those
3008 types and compute their sizes.
3010 2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
3011 Hui Zhu <hui@codesourcery.com>
3013 * gdb.base/fileio.exp: Add test for shell not available as well as
3015 * gdb.base/fileio.c (test_system): Check for shell twice.
3017 2014-06-04 Yao Qi <yao@codesourcery.com>
3019 * gdb.base/auto-connect-native-target.exp: Remove redundant
3020 space from the regexp pattern.
3022 2014-06-04 Yao Qi <yao@codesourcery.com>
3024 * gdb.base/default.exp: Replace "child" with "native" in
3027 2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
3029 * gdb.python/py-xmethods.cc: New testcase to test xmethods.
3030 * gdb.python/py-xmethods.exp: New tests to test xmethods.
3031 * gdb.python/py-xmethods.py: Python script supporting the
3032 new testcase and tests.
3034 2014-06-03 Joel Brobecker <brobecker@adacore.com>
3035 Pedro Alves <palves@redhat.com>
3037 PR breakpoints/17000
3038 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
3039 * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
3041 2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
3043 * gdb.base/subst.exp: Add tests to verify partial path matching
3046 2014-06-03 Pedro Alves <palves@redhat.com>
3048 * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
3049 target that doesn't use software single-stepping.
3051 2014-06-03 Pedro Alves <palves@redhat.com>
3053 PR breakpoints/17000
3054 * gdb.base/sss-bp-on-user-bp-2.c: New file.
3055 * gdb.base/sss-bp-on-user-bp-2.exp: New file.
3057 2014-06-02 Doug Evans <xdje42@gmail.com>
3059 * gdb.guile/scm-parameter.exp: New file.
3061 2014-06-02 Doug Evans <xdje42@gmail.com>
3063 * gdb.guile/scm-cmd.c: New file.
3064 * gdb.guile/scm-cmd.exp: New file.
3066 2014-06-02 Doug Evans <xdje42@gmail.com>
3068 * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
3069 pretty-printer lookup.
3070 * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
3071 (make-pp_s-printer): Call it.
3072 (make-pretty-printer-from-dict): New function.
3073 (lookup-pretty-printer-maker-from-dict): New function.
3074 (*pretty-printer*): Simplify.
3075 (make-objfile-pp_s-printer): New function.
3076 (install-objfile-pretty-printers!): New function.
3077 (make-progspace-pp_s-printer): New function.
3078 (install-progspace-pretty-printers!): New function.
3079 * gdb.guile/scm-progspace.c: New file.
3080 * gdb.guile/scm-progspace.exp: New file.
3082 2014-06-02 Pedro Alves <palves@redhat.com>
3084 * gdb.base/dprintf-bp-same-addr.c: New file.
3085 * gdb.base/dprintf-bp-same-addr.exp: New file.
3087 2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3089 * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
3090 * gdb.arch/powerpc-power.s: Likewise.
3092 2014-06-02 Joel Brobecker <brobecker@adacore.com>
3094 * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
3096 2014-06-01 Yao Qi <yao@codesourcery.com>
3098 * gdb.base/watchpoint.exp (test_watch_location): Check null
3099 pointer can be dereferenced. If not, do the test, otherwise
3102 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3104 * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
3106 * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
3108 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3110 * gdb.arch/amd64-invalid-stack-middle.S: New file.
3111 * gdb.arch/amd64-invalid-stack-middle.c: New file.
3112 * gdb.arch/amd64-invalid-stack-middle.exp: New file.
3113 * gdb.arch/amd64-invalid-stack-top.c: New file.
3114 * gdb.arch/amd64-invalid-stack-top.exp: New file.
3116 2014-05-30 Pedro Alves <palves@redhat.com>
3118 PR breakpoints/17000
3119 * gdb.base/sss-bp-on-user-bp.c: New file.
3120 * gdb.base/sss-bp-on-user-bp.exp: New file.
3122 2014-05-30 David Blaikie <dblaikie@gmail.com>
3124 * gdb.opt/inline-break.c: Fix clang compatibility by specifying
3125 gnu_inline semantics via attribute.
3126 * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
3127 source explicitly specifies the required semantics.
3129 2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
3131 * gdb.reverse/sigall-reverse.exp: Fix a typo.
3133 2014-05-29 Pedro Alves <palves@redhat.com>
3134 Tom Tromey <tromey@redhat.com>
3136 * gdb.base/async-shell.exp: Don't enable target-async.
3137 * gdb.base/async.exp
3138 * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
3140 (top level): Don't test with "target-async".
3141 * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
3142 * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
3143 * gdb.base/inferior-died.exp: Don't enable target-async.
3144 * gdb.base/interrupt-noterm.exp: Likewise.
3145 * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
3146 * gdb.mi/mi-nonstop-exit.exp: Likewise.
3147 * gdb.mi/mi-nonstop.exp: Likewise.
3148 * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
3149 * gdb.mi/mi-nsintrall.exp: Likewise.
3150 * gdb.mi/mi-nsmoribund.exp: Likewise.
3151 * gdb.mi/mi-nsthrexec.exp: Likewise.
3152 * gdb.mi/mi-watch-nonstop.exp: Likewise.
3153 * gdb.multi/watchpoint-multi.exp: Adjust comment.
3154 * gdb.python/py-evsignal.exp: Don't enable target-async.
3155 * gdb.python/py-evthreads.exp: Likewise.
3156 * gdb.python/py-prompt.exp: Likewise.
3157 * gdb.reverse/break-precsave.exp: Don't test with "target-async".
3158 * gdb.server/solib-list.exp: Don't enable target-async.
3159 * gdb.threads/thread-specific-bp.exp: Likewise.
3160 * lib/mi-support.exp: Adjust to use mi-async.
3162 2014-05-29 Pedro Alves <palves@redhat.com>
3165 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
3166 reason, even in sync mode.
3168 2014-05-29 Pedro Alves <palves@redhat.com>
3169 Hui Zhu <hui@codesourcery.com>
3172 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
3173 * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
3174 * gdb.mi/mi-condbreak-call-thr-state.c: New file.
3175 * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
3177 2014-05-28 Joel Brobecker <brobecker@adacore.com>
3179 * config/monitor.exp (gdb_target_monitor): Replace use of
3180 "set remotebaud" by "set serial baud".
3182 2014-05-26 Andy Wingo <wingo@igalia.com>
3184 * gdb.guile/scm-breakpoint.exp:
3185 * gdb.guile/scm-gsmob.exp: Update to use plain old object
3186 properties instead of gdb-object-properties.
3188 2014-05-26 Yao Qi <yao@codesourcery.com>
3190 * gdb.server/no-thread-db.exp: Specify source file name
3191 explicitly when setting a breakpoint.
3193 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3195 * gdb.btrace/vdso.c: New.
3196 * gdb.btrace/vdso.exp: New.
3198 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3200 * gdb.base/gcore.exp (capture_command_output): Move ...
3201 * lib/gdb.exp (capture_command_output): ... here.
3203 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3205 * gdb.btrace/data.exp: Test memory access during btrace replay.
3207 2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
3209 * lib/mi-support.exp (mi_run_cmd_full): Add comments.
3211 2014-05-21 Pedro Alves <palves@redhat.com>
3214 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
3215 (top level): Test that output related to execution commands is
3216 sent to the console with CLI commands, but not with MI commands.
3217 Test that breakpoint events are always mirrored to the console.
3218 Also expect the new source line to be output after a "next" in
3219 async mode too. Make it a pass/fail test.
3220 * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
3222 * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
3224 2014-05-21 Pedro Alves <palves@redhat.com>
3226 * gdb.base/list.exp (build_pattern, test_list): New procedures.
3227 Use them to test variations of "list" after reaching a breakpoint.
3228 * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
3229 Test "list" with listsize 10 after reaching a breakpoint.
3230 * gdb.python/python.exp (decode_line current location line
3231 number): Adjust expected line number.
3233 2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
3235 * lib/mi-support.exp (mi_run_cmd_full): Revert to original
3236 behavior for $args, pass it directly to "run".
3238 2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
3240 * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
3243 2014-05-21 Pedro Alves <palves@redhat.com>
3245 * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
3246 auto-connect-native-target off".
3247 * gdb.base/auto-connect-native-target.c: New file.
3248 * gdb.base/auto-connect-native-target.exp: New file.
3250 2014-05-21 Pedro Alves <palves@redhat.com>
3252 * gdb.base/default.exp: Test "target native" instead of "target
3255 2014-05-21 Mark Wielaard <mjw@redhat.com>
3257 * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
3259 2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3261 Fix TLS access for -static -pthread.
3262 * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
3263 <HAVE_TLS> (thread_function, main): Initialize it.
3264 * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
3266 <$have_tls != "">: Check TLSVAR.
3268 2014-05-21 Pedro Alves <palves@redhat.com>
3270 * gdb.base/dcache-line-read-error.c: New.
3271 * gdb.base/dcache-line-read-error.exp: New.
3273 2014-05-20 Pedro Alves <palves@redhat.com>
3275 * gdb.base/compare-sections.c: New file.
3276 * gdb.base/compare-sections.exp: New file.
3278 2014-05-20 Pedro Alves <palves@redhat.com>
3280 * gdb.base/break-idempotent.c: New file.
3281 * gdb.base/break-idempotent.exp: New file.
3283 2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
3285 * gdb.btrace/nohist.exp: New.
3287 2014-05-20 Yao Qi <yao@codesourcery.com>
3289 * lib/gdb.exp (gdb_init): Set timeout if test file is under
3290 gdb.reverse directory and gdb_reverse_timeout exists in board
3292 * README: Document gdb_reverse_timeout.
3294 2014-05-20 Yao Qi <yao@codesourcery.com>
3296 * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
3297 'test_file_name'. Treat args as a string instead of a list.
3298 (gdb_init): Rename argument 'args' by 'test_file_name'.
3300 2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
3302 * gdb.arch/powerpc-power.exp: New file.
3303 * gdb.arch/powerpc-power.s: New file.
3305 2014-05-16 Doug Evans <dje@google.com>
3307 * gdb.base/Makefile.in (EXECUTABLES): Add completion.
3308 * gdb.base/completion.exp: Check that all expected files exist
3309 before doing file completion.
3311 2014-05-16 Doug Evans <dje@google.com>
3313 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
3315 (do_syscall_tests_without_xml): Update.
3317 2014-05-16 Pedro Alves <palves@redhat.com>
3319 * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
3320 instead of "unknown output after running".
3322 2014-05-16 Yao Qi <yao@codesourcery.com>
3324 * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
3325 file1.txt from host at the end.
3326 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
3328 2014-05-15 Doug Evans <dje@google.com>
3330 * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
3331 * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
3332 loading file. Add test for TU lookup.
3334 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3336 * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
3337 calling "-exec-arguments" or "set args" before running the
3340 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3342 * lib/mi-support.exp (mi_expect_stop): Expect message for
3343 inferiors that exit with non-zero exit code.
3345 2014-05-14 Yao Qi <yao@codesourcery.com>
3347 * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
3348 match absolute path on remote host.
3349 (test_file_list_exec_source_files): Remove "/" from the
3352 2014-05-14 Yao Qi <yao@codesourcery.com>
3354 * boards/local-remote-host-notty.exp (${board}_file): New
3357 2014-05-07 Kyle McMartin <kyle@redhat.com>
3359 Pushed by Joel Brobecker <brobecker@adacore.com>.
3360 * gdb.arch/aarch64-atomic-inst.c: New file.
3361 * gdb.arch/aarch64-atomic-inst.exp: New file.
3363 2014-05-07 Yao Qi <yao@codesourcery.com>
3365 * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
3366 in current context" too.
3368 2014-05-05 Keith Seitz <keiths@redhat.com>
3370 * gdb.linespec/ls-dollar.exp: Add test for linespec
3371 file:convenience_variable.
3373 2014-05-05 Yao Qi <yao@codesourcery.com>
3375 * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
3376 traceframes into tfile and ctf trace files. Read data from
3377 trace file and test collected data.
3378 (gdb_collect_locals_test): Likewise.
3379 (gdb_unavailable_registers_test): Likewise.
3380 (gdb_unavailable_floats): Likewise.
3381 (gdb_collect_globals_test): Likewise.
3382 (top-level): Append "ctf" to trace_file_targets if GDB
3385 2014-05-05 Yao Qi <yao@codesourcery.com>
3387 * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
3389 (gdb_collect_args_test_1): ... it. New proc.
3390 (gdb_collect_locals_test): Move some code to ...
3391 (gdb_collect_locals_test_1): ... it. New proc.
3392 (gdb_unavailable_registers_test): Move some code to ...
3393 (gdb_unavailable_registers_test_1): ... it. New proc.
3394 (gdb_unavailable_floats): Move some code to ...
3395 (gdb_unavailable_floats_1): ... it. New proc.
3397 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3399 * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
3400 probes to test for bitness recognition.
3401 * gdb.arch/amd64-stap-optional-prefix.exp
3402 (test_probe_value_without_reg): New procedure.
3403 Add code to test for different kinds of bitness.
3405 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3407 PR breakpoints/16889
3408 * gdb.arch/amd64-stap-optional-prefix.S: New file.
3409 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
3411 2014-05-01 Pedro Alves <palves@redhat.com>
3413 * lib/gdb.exp (gdb_load): Extend comment. Skip calling
3414 gdb_file_cmd if no file is specified.
3415 * boards/native-extended-gdbserver.exp (gdb_load): Use the
3416 last_loaded_file to set the remote exec-file.
3418 2014-05-01 Pedro Alves <palves@redhat.com>
3420 * boards/local-remote-host.exp: New file.
3422 2014-05-01 Pedro Alves <palves@redhat.com>
3424 * boards/local-remote-host.exp: Rename to ...
3425 * boards/local-remote-host-notty.exp: ... this.
3427 2014-04-28 Joel Brobecker <brobecker@adacore.com>
3429 * gdb.ada/dyn_arrayidx: New testcase.
3431 2014-04-26 Yao Qi <yao@codesourcery.com>
3433 * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
3434 and compute the length of function main. Save it in
3436 (Dwarf::assemble): Use $main_length instead of hard-coded 10.
3437 (top-level): Use gdb_compile to compile objects into
3438 executable and restart GDB. Remove invocation to
3439 prepare_for_testing.
3441 2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
3442 Pedro Alves <palves@redhat.com>
3445 * gdb.multi/multi-attach.c: New file.
3446 * gdb.multi/multi-attach.exp: New file.
3448 2014-04-25 Pedro Alves <palves@redhat.com>
3450 * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
3452 (top level): Test that "set remote conditional-breakpoints-packet
3453 off" works as intended.
3454 * gdb.base/dprintf.exp: Test that "set remote
3455 breakpoint-commands-packet off" works as intended.
3456 * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
3458 (top level): Call it.
3459 * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
3460 remote fast-tracepoints-packet off" works as intended.
3461 * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
3462 * lib/gdb.exp (gdb_is_target_remote): ... here.
3464 2014-04-24 David Blaikie <dblaikie@gmail.com>
3466 * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
3467 ensure clang would not discard them.
3468 * gdb.base/gdbvars.c: Ditto.
3469 * gdb.base/memattr.c: Ditto.
3470 * gdb.base/whatis.c: Ditto.
3471 * gdb.python/py-prettyprint.c: Ditto.
3472 * gdb.trace/actions.c: Ditto.
3473 * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
3474 ensure clang would not discard it.
3476 2014-04-24 David Blaikie <dblaikie@gmail.com>
3478 * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
3479 clang to emit the full definition of type required by the test
3480 * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
3482 2014-04-24 David Blaikie <dblaikie@gmail.com>
3484 * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
3485 coax Clang into emitting the definition of the type.
3486 * gdb.cp/pr10728-x.h (y): Ditto.
3487 * gdb.cp/pr10728-y.cc (y): Ditto.
3489 2014-04-24 David Blaikie <dblaikie@gmail.com>
3491 * gdb.base/label.exp: XFAIL label related tests under Clang.
3492 * gdb.cp/cplabel.exp: Ditto.
3493 * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
3494 under Clang those using labels.
3496 2014-04-25 Yao Qi <yao@codesourcery.com>
3498 * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
3500 * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
3501 partial_label and double_label.
3503 2014-04-24 David Blaikie <dblaikie@gmail.com>
3505 * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
3507 2014-04-24 David Blaikie <dblaikie@gmail.com>
3509 * gdb.cp/cpexprs.cc: Move braces to the same line as the start
3510 of the function to work across GCC and Clang.
3511 * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
3512 pointer types (const void ** const V void **).
3514 2014-04-24 Michael Sturm <michael.sturm@mintel.com>
3515 Walfred Tedeschi <walfred.tedeschi@intel.com>
3517 * Makefile.in (EXECUTABLES): Added i386-avx512.
3518 * gdb.arch/i386-avx512.c: New file.
3519 * gdb.arch/i386-avx512.exp: Likewise.
3521 2014-04-23 Keith Seitz <keiths@redhat.com>
3523 * lib/mi-support.exp (mi_list_breakpoints): Delete.
3524 (mi_make_breakpoint_table): New procedure.
3525 (mi_create_breakpoint): Use mi_make_breakpoint
3526 and return the result.
3527 (mi_make_breakpoint): New procedure.
3528 (mi_build_kv_pairs): New procedure.
3530 * gdb.mi/mi-break.exp: Remove unused globals,
3531 update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
3532 All callers updated.
3533 * gdb.mi/mi-dprintf.exp: Use variable to track command
3535 Update all callers of mi_create_breakpoint and use
3536 mi_make_breakpoint_table.
3537 Remove any unused global variables.
3538 * gdb.mi/mi-nonstop.exp: Likewise.
3539 * gdb.mi/mi-nsintrall.exp: Likewise.
3540 * gdb.mi/mi-nsmoribund.exp: Likewise.
3541 * gdb.mi/mi-nsthrexec.exp: Likewise.
3542 * gdb.mi/mi-reverse.exp: Likewise.
3543 * gdb.mi/mi-simplerun.exp: Likewise.
3544 * gdb.mi/mi-stepn.exp: Likewise.
3545 * gdb.mi/mi-syn-frame.exp: Likewise.
3546 * gdb.mi/mi-until.exp: Likewise.
3547 * gdb.mi/mi-var-cp.exp: Likewise.
3548 * gdb.mi/mi-var-display.exp: Likewise.
3549 * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
3550 * gdb.mi/mi2-var-child.exp: Likewise.
3551 * gdb.mi/mi-vla-c99.exp: Likewise.
3552 * lib/mi-support.exp: Likewise.
3554 From Ian Lance Taylor <iant@cygnus.com>:
3555 * lib/gdb.exp (parse_args): New procedure.
3557 2014-04-23 Pedro Alves <palves@redhat.com>
3559 * gdb.base/break-unload-file.c: New file.
3560 * gdb.base/break-unload-file.exp: New file.
3561 * gdb.base/sym-file-lib.c (baz): New function.
3562 * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
3564 (load): Store the segment's mapped size.
3565 (unload): New function.
3566 (unload_shlib): New function.
3567 * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
3568 * gdb.base/sym-file-main.c (main): Unload, and reload the library,
3569 set a breakpoint at baz, and call it.
3570 * gdb.base/sym-file.exp: New tests for stale breakpoint
3573 2014-04-23 Pedro Alves <palves@redhat.com>
3575 * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
3576 * gdb.base/hbreak-in-shr-unsupported.c: New file.
3577 * gdb.base/hbreak-in-shr-unsupported.exp: New file.
3578 * gdb.base/hbreak-unmapped.c: New file.
3579 * gdb.base/hbreak-unmapped.exp: New file.
3580 * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
3581 * lib/gdb.exp (gdb_is_target_remote): ... here.
3583 2014-04-22 Pedro Alves <palves@redhat.com>
3585 * gdb.base/consecutive-step-over.c: New file.
3586 * gdb.base/consecutive-step-over.exp: New file.
3588 2014-04-22 Pedro Alves <palves@redhat.com>
3590 * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
3591 instead of send_gdb/gdb_expect.
3593 2014-04-22 Yao Qi <yao@codesourcery.com>
3595 * lib/trace-support.exp (generate_tracefile): New procedure.
3596 * gdb.trace/tfile.exp: Skip the test if generate_tracefile
3598 * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
3599 if generate_tracefile returns 1.
3601 2014-04-18 Tom Tromey <palves@redhat.com>
3602 Pedro alves <tromey@redhat.com>
3605 * gdb.opt/inline-bt.exp: Test backtracing from an inline function
3606 with a backtrace limit.
3607 * gdb.python/py-frame-inline.exp: Test running to an inline
3608 function with a backtrace limit, and printing the newest frame.
3609 * gdb.python/py-frame-inline.c (main): Call f.
3611 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3613 * gdb.java/jnpe.exp: Drop srcdir from untested path.
3615 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3617 * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
3618 Drop prefix from unsupported source file path.
3620 2014-04-17 Yao Qi <yao@codesourcery.com>
3622 * lib/gdb.exp (with_target_charset): New proc.
3623 * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
3624 with_target_charset.
3625 (test_print_strings): Likewise.
3626 (test_repeat_bytes): Likewise.
3627 * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
3630 2014-04-16 Keith Seitz <keiths@redhat.com>
3633 * gdb.dwarf2/corrupt.c: New file.
3634 * gdb.dwarf2/corrupt.exp: New file.
3636 2014-04-16 Keith Seitz <keiths@redhat.com>
3639 * gdb.cp/namelessclass.cc: New file.
3640 * gdb.cp/namelessclass.exp: New file.
3641 * gdb.cp/namelessclass.S: New file.
3643 2014-04-16 Doug Evans <dje@google.com>
3645 * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
3647 (gdbserver_default_get_comm_port): New function.
3648 (gdbserver_start): Check if board file provided
3649 "gdbserver,get_comm_port" and use it if so.
3650 * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
3651 (gdb,socketport): Set to "stdio".
3652 (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
3653 (stdio_gdbserver_template): Delete.
3654 (${board}_get_remote_address): Update.
3655 (${board}_build_remote_cmd): Delete.
3656 (${board}_get_comm_port): New function.
3657 (${board}_spawn): Update.
3658 * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
3660 (${board}_get_remote_address): Update.
3661 (${board}_get_comm_port): New function.
3663 2014-04-16 Andrew Burgess <aburgess@broadcom.com>
3665 * gdb.base/memattr.exp: Improve regexps to handle memory regions
3666 appearing in any order.
3668 2014-04-15 Doug Evans <dje@google.com>
3670 * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
3671 uninitialized value of "description".
3673 2014-04-15 Keith Seitz <keiths@redhat.com>
3675 * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
3676 Remove unused globals.
3677 (test_running_the_program): Likewise.
3678 (test_controlled_execution): Likewise.
3679 (test_controlling_breakpoints): Likewise.
3680 (test_program_termination): Likewise.
3682 2014-04-15 Keith Seitz <keiths@redhat.com>
3684 * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
3686 (test_rbreak_creation_and_listing): Likewise.
3687 (test_ignore_count): Likewise.
3688 (test_error): Likewise.
3690 2014-04-15 Pedro Alves <palves@redhat.com>
3692 * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
3693 <ansidecl.h>, <elf/common.h> and <elf/external.h> to
3695 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3696 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3697 to sym-file-loader.c.
3698 (struct library): Forward declare.
3699 (load_shlib, lookup_function): Change prototypes.
3700 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3701 (translate_offset): Remove declarations.
3702 (get_text_addr): New declaration.
3703 * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
3704 <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
3706 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3707 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3708 here from sym-file-loader.h.
3709 (struct library): New structure.
3710 (load_shlib, lookup_function): Change prototypes and adjust to
3711 work with a struct library.
3712 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3713 (translate_offset): Make static.
3714 (get_text_addr): New function.
3715 * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
3717 2014-04-15 Pedro Alves <palves@redhat.com>
3719 * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
3721 2014-04-15 Pedro Alves <palves@redhat.com>
3723 * gdb.base/sym-file-loader.c: Include <limits.h>.
3724 (SELF_LINK): New define.
3725 (get_origin): New function.
3726 (load_shlib): Use it.
3727 * gdb.base/sym-file.exp: Don't early return if the target is
3728 remote. Use runto_main, and issue fail is that fails. Use
3730 (shlib_name): Delete.
3731 (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
3733 2014-04-15 Pedro Alves <palves@redhat.com>
3735 * gdb.base/sym-file.exp: Remove regex characters from test
3736 message. Don't refer to breakpoint numbers in test messages.
3738 2014-04-14 Keith Seitz <keiths@redhat.com>
3741 * gdb.cp/var-tag.cc: New file.
3742 * gdb.cp/var-tag.exp: New file.
3743 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
3744 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
3745 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
3746 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
3748 2014-04-14 Tom Tromey <tromey@redhat.com>
3750 * gdb.cp/classes.exp (test_enums): Handle underlying type.
3751 * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
3753 * gdb.cp/enum-class.exp: New file.
3754 * gdb.cp/enum-class.cc: New file.
3756 2014-04-14 Tom Tromey <tromey@redhat.com>
3758 * gdb.dwarf2/enum-type.exp: New file.
3760 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3762 * gdb.mi/mi-vla-c99.exp: New file.
3763 * gdb.mi/vla.c: New file.
3765 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3767 * gdb.base/vla-datatypes.c: New file.
3768 * gdb.base/vla-datatypes.exp: New file.
3770 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3772 * gdb.base/vla-ptr.c: New file.
3773 * gdb.base/vla-ptr.exp: New file.
3775 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3777 * gdb.dwarf2/count.exp: New file.
3779 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
3781 * gdb.base/vla-sideeffect.c: New file.
3782 * gdb.base/vla-sideeffect.exp: New file.
3784 2014-04-14 David Blaikie <dblaikie@gmail.com>
3786 * gdb.mi/non-stop.c: Add return value for non-void function return
3788 * gdb.threads/staticthreads.c: Ditto.
3790 2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
3791 Doug Evans <xdje42@gmail.com>
3793 * gdb.guile/scm-value.c: Improve test case.
3794 * gdb.guile/scm-value.exp: Add new test.
3796 2014-04-11 David Blaikie <dblaikie@gmail.com>
3798 * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
3799 override Clang's default.
3801 2014-04-11 Joel Brobecker <brobecker@adacore.com>
3803 Revert the following changes (regressions):
3805 * gdb.base/vla-sideeffect.c: New file.
3806 * gdb.base/vla-sideeffect.exp: New file.
3808 * gdb.dwarf2/count.exp: New file.
3810 * gdb.base/vla-multi.c: New file.
3811 * gdb.base/vla-multi.exp: New file.
3813 * gdb.base/vla-ptr.c: New file.
3814 * gdb.base/vla-ptr.exp: New file.
3816 * gdb.base/vla-datatypes.c: New file.
3817 * gdb.base/vla-datatypes.exp: New file.
3819 * gdb.mi/mi-vla-c99.exp: New file.
3820 * gdb.mi/vla.c: New file.
3822 2014-04-11 Keith Seitz <keiths@redhat.com>
3825 * gdb.cp/cpsizeof.exp: New file.
3826 * gdb.cp/cpsizeof.cc: New file.
3828 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3830 * gdb.mi/mi-vla-c99.exp: New file.
3831 * gdb.mi/vla.c: New file.
3833 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3835 * gdb.base/vla-datatypes.c: New file.
3836 * gdb.base/vla-datatypes.exp: New file.
3838 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3840 * gdb.base/vla-ptr.c: New file.
3841 * gdb.base/vla-ptr.exp: New file.
3843 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3845 * gdb.base/vla-multi.c: New file.
3846 * gdb.base/vla-multi.exp: New file.
3848 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3850 * gdb.dwarf2/count.exp: New file.
3852 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
3854 * gdb.base/vla-sideeffect.c: New file.
3855 * gdb.base/vla-sideeffect.exp: New file.
3857 2014-04-11 Yao Qi <yao@codesourcery.com>
3859 * gdb.base/completion.exp: Check file exists before running tests
3862 2014-04-10 Pedro Alves <palves@redhat.com>
3864 * gdb.base/cond-eval-mode.c: New file.
3865 * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
3866 prepare_for_testing to build the new file. Check result of
3868 (test_break, test_watch): New procedures.
3869 (top level): Use them.
3871 2014-04-08 Pierre Muller <muller@sourceware.org>
3873 * gdb.base/printcmds.exp (test_artificial_arrays): Disable
3874 Ctrl-V use for mingw hosts.
3876 2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
3878 * gdb.python/py-value.c: Improve test case.
3879 * gdb.python/py-value.exp: Add new test.
3881 2014-04-07 David Blaikie <dblaikie@gmail.com>
3883 * lib/compiler.c: Identify the clang compiler.
3884 * lib/compiler.cc: Ditto.
3886 2014-04-03 Yao Qi <yao@codesourcery.com>
3888 * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
3890 2014-04-01 Anton Blanchard <anton@samba.org>
3892 * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
3895 2014-04-01 Anton Blanchard <anton@samba.org>
3897 * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
3898 prepare_for_testing.
3900 2014-04-01 Anton Blanchard <anton@samba.org>
3902 * gdb.arch/ppc64-atomic-inst.c: Remove.
3903 * gdb.arch/ppc64-atomic-inst.S: New file.
3904 * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
3906 2014-03-31 Doug Evans <dje@google.com>
3908 * gdb.base/print-symbol-loading-lib.c: New file.
3909 * gdb.base/print-symbol-loading-main.c: New file.
3910 * gdb.base/print-symbol-loading.exp: New file.
3912 2014-03-31 Yao Qi <yao@codesourcery.com>
3914 * gdb.base/source-dir.exp: Allow ';' as a directory separator.
3916 2014-03-28 Joel Brobecker <brobecker@adacore.com>
3918 * gdb.ada/mi_dyn_arr: New testcase.
3920 2014-03-27 Doug Evans <dje@google.com>
3922 * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
3924 2014-03-27 Yao Qi <yao@codesourcery.com>
3926 * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
3927 if target is nios2-*-*.
3929 2014-03-26 Yao Qi <yao@codesourcery.com>
3931 * lib/gdb.exp (readline_is_used): New proc.
3932 * gdb.base/completion.exp: Move tests on command complete up.
3933 Skip the rest of tests if readline is not used.
3934 * gdb.ada/complete.exp: Skp the test if readline is not
3936 * gdb.base/filesym.exp: Likewise.
3937 * gdb.base/macscp.exp: Likewise.
3938 * gdb.base/readline-ask.exp: Likewise.
3939 * gdb.base/readline.exp: Likewise.
3940 * gdb.python/py-cmd.exp: Likewise.
3941 * gdb.trace/tfile.exp: Likewise.
3943 2014-03-26 Yao Qi <yao@codesourcery.com>
3945 * gdb.base/macscp.exp: Fix code format issues.
3947 2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
3949 * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
3950 * gdb.asm/powerpc64le.inc: New file.
3952 2014-03-25 Pedro Alves <palves@redhat.com>
3953 Doug Evans <dje@google.com>
3955 * gdb.base/source-execution.c: New file.
3956 * gdb.base/source-execution.exp: New file.
3957 * gdb.base/source-execution.gdb: New file.
3959 2014-03-24 Doug Evans <dje@google.com>
3961 * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
3964 2014-03-24 Hui Zhu <hui@codesourcery.com>
3965 Pedro Alves <palves@redhat.com>
3967 PR breakpoints/16101
3968 * gdb.base/dprintf.exp: Use unsupported rather than changing the
3969 test pass/fail messages. Detect missing support for dprintf when
3970 breakpoints are actually inserted.
3971 * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
3972 breakpoints are actually inserted.
3973 * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
3976 2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
3978 * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
3980 2014-03-22 Doug Evans <xdje42@gmail.com>
3982 * gdb.python/python.exp (python not supported): Verify multi-line
3983 python command issues an error.
3984 * gdb.guile/guile.exp (guile not supported): Verify multi-line
3985 guile command issues an error.
3987 2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
3989 * gdb.threads/thread-specific.exp: Handle the lack of usable
3990 $this_breakpoint and $this_thread.
3992 2014-03-21 Hui Zhu <hui@codesourcery.com>
3994 * gdb.base/attach.exp (do_command_attach_tests): New.
3996 2014-03-20 Tom Tromey <tromey@redhat.com>
3997 Pedro Alves <palves@redhat.com>
4000 * gdb.base/condbreak-call-false.c: New file.
4001 * gdb.base/condbreak-call-false.exp: New file.
4003 2014-03-20 Pedro Alves <palves@redhat.com>
4005 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
4007 (block_signals, unblock_signals): Delete.
4008 (child_function_2, main): Remove references to deleted variable
4011 2014-03-20 Pedro Alves <palves@redhat.com>
4013 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
4014 Use pthread_kill to signal thread 2.
4015 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4016 Adjust to make the test send itself a signal rather than using the
4017 host's "kill" command.
4019 2014-03-20 Pedro Alves <palves@redhat.com>
4021 * gdb.threads/multiple-step-overs.c: New file.
4022 * gdb.threads/multiple-step-overs.exp: New file.
4023 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4024 Adjust expected infrun debug output.
4026 2014-03-20 Pedro Alves <palves@redhat.com>
4028 * gdb.threads/step-over-trips-on-watchpoint.c: New file.
4029 * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
4031 2014-03-20 Pedro Alves <palves@redhat.com>
4034 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
4035 old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
4036 of gdb_test_multiple.
4037 * gdb.cp/annota2.exp: Remove kfail for gdb/38.
4038 * gdb.cp/annota3.exp: Remove kfail for gdb/38.
4040 2014-03-20 Pedro Alves <palves@redhat.com>
4042 * gdb.threads/step-over-lands-on-breakpoint.c: New file.
4043 * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
4045 2014-03-19 Pedro Alves <palves@redhat.com>
4047 * gdb.base/async.exp: Remove early return.
4049 2014-03-19 Pedro Alves <palves@redhat.com>
4051 * gdb.base/async.exp (step& tests): Pass explicit test messages.
4053 2014-03-19 Pedro Alves <palves@redhat.com>
4055 * gdb.base/async.exp (test_background): Expect \r\n after
4056 "completed." in the fail pattern.
4058 2014-03-19 Pedro Alves <palves@redhat.com>
4060 * gdb.base/async.exp (test_background): New procedure.
4061 Use it for all background execution command tests.
4063 2014-03-19 Pedro Alves <palves@redhat.com>
4065 * gdb.base/async.exp: Use prepare_for_testing.
4067 2014-03-19 Pedro Alves <palves@redhat.com>
4069 * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
4072 2014-03-19 Pedro Alves <palves@redhat.com>
4074 * gdb.base/async.c (main): Add "jump here" and "until here" line
4076 * gdb.base/async.exp (jump_here): New global.
4077 (jump& test): Use it.
4078 (until_here): New global.
4079 (until& test): Use it.
4081 2014-03-19 Pedro Alves <palves@redhat.com>
4083 * gdb.base/async.exp: Don't frob gdb_protocol.
4085 2014-03-18 Doug Evans <xdje42@gmail.com>
4087 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.
4088 Fix spelling of exec-done-display.
4090 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4093 * gdb.base/gdb-sigterm.c: New file.
4094 * gdb.base/gdb-sigterm.exp: New file.
4096 2014-03-18 Pedro Alves <palves@redhat.com>
4099 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
4100 * lib/mi-support.exp (mi_expect_stop): Add special handling for
4103 2014-03-17 Joel Brobecker <brobecker@adacore.com>
4105 * gdb.ada/pckd_arr_ren: New testcase.
4107 2014-03-13 Doug Evans <xdje42@gmail.com>
4110 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
4111 collect after discarding symbols.
4113 2014-03-13 Ludovic Courtès <ludo@gnu.org>
4114 Doug Evans <xdje42@gmail.com>
4116 * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
4117 to history survives a gc.
4119 2014-03-13 Pedro Alves <palves@redhat.com>
4121 * gdb.base/default.exp: Don't test "target procfs".
4123 2014-03-13 Pedro Alves <palves@redhat.com>
4125 * gdb.base/default.exp: Update "target child" and "target procfs"
4126 tests to not expect "Unix".
4128 2014-03-12 Tom Tromey <tromey@redhat.com>
4130 * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
4131 New procs. Add target-async tests.
4132 * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
4133 Add target-async tests.
4135 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4137 * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
4138 'func_start' and 'func_end' for the beginning and end of the
4139 function code, respectively.
4140 * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
4141 'func_end' instead of 'func' and 'main'.
4143 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4145 * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
4146 * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
4147 generate the debug info assembler source.
4149 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4151 * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
4152 * gdb.dwarf2/arr-subrange.exp: Likewise.
4153 * gdb.dwarf2/dwz.exp: Likewise.
4154 * gdb.dwarf2/method-ptr.exp: Likewise.
4155 * gdb.dwarf2/missing-sig-type.exp: Likewise.
4156 * gdb.dwarf2/subrange.exp: Likewise.
4157 * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
4158 * gdb.dwarf2/implptrpiece.exp: Likewise.
4159 * gdb.dwarf2/nostaticblock.exp: Likewise.
4161 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4163 * lib/gdb.exp (build_executable_from_specs): Don't prepend source
4164 directory to absolute path name arguments.
4166 2014-03-10 Joel Brobecker <brobecker@adacore.com>
4168 * gdb.ada/tagged_access: New testcase.
4170 2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
4172 * gdb.btrace/data.exp: Update expected output.
4174 2014-03-06 Yao Qi <yao@codesourcery.com>
4176 * gdb.trace/pr16508.exp: New file.
4178 2014-03-05 Pedro Alves <palves@redhat.com>
4181 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
4183 (top level): Adjust to use it. Add tests that exercise breakpoint
4184 interaction with the code-cache.
4186 2014-02-26 Ludovic Courtès <ludo@gnu.org>
4188 * gdb.guile/scm-value.exp (test_value_in_inferior): Add
4189 test for 'history-append!'.
4191 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4193 * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
4194 * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
4195 * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
4196 * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
4197 * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
4198 * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
4200 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4202 * testsuite/gdb.python/py-pp-re-notag.c: New file.
4203 * testsuite/gdb.python/py-pp-re-notag.ex: New file.
4204 * testsuite/gdb.python/py-pp-re-notag.p: New file.
4206 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4208 * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
4210 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4212 * gdb.dwarf2/arr-stride.c: New file.
4213 * gdb.dwarf2/arr-stride.exp: New file.
4215 2014-02-26 Pedro Alves <palves@redhat.com>
4217 * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
4218 that won't ever trigger. Make sure that GDB reports the correct
4219 breakpoint that caused the stop.
4221 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4224 * gdb.base/auto-load-script: New file.
4225 * gdb.base/auto-load.c: New file.
4226 * gdb.base/auto-load.exp: New file.
4229 * gdb.base/auto-load.exp: Fix out-of-srctree run.
4231 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4233 Fix dw2-icycle.exp -fsanitize=address GDB crash.
4234 * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
4236 2014-02-24 Doug Evans <dje@google.com>
4238 * lib/gdb.exp (run_on_host): Log error output if program fails.
4240 2014-02-21 Pedro Alves <palves@redhat.com>
4242 * gdb.threads/step-after-sr-lock.c: Rename to ...
4243 * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
4244 * gdb.threads/step-after-sr-lock.exp: Rename to ...
4245 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4248 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
4251 * gdb.arch/amd64-stap-special-operands.exp: New file.
4252 * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
4253 * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
4254 * gdb.arch/amd64-stap-triplet.S: Likewise.
4255 * gdb.arch/amd64-stap-triplet.c: Likewise.
4257 2014-02-20 Joel Brobecker <brobecker@adacore.com>
4259 * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
4260 in .section pseudo-op.
4262 2014-02-20 lin zuojian <manjian2006@gmail.com>
4263 Joel Brobecker <brobecker@adacore.com>
4264 Doug Evans <xdje42@gmail.com>
4267 * gdb.dwarf2/dw2-icycle.S: New file.
4268 * gdb.dwarf2/dw2-icycle.c: New file.
4269 * gdb.dwarf2/dw2-icycle.exp: New file.
4271 2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
4273 * gdb.python/py-value-cc.cc: Improve test case to enable testing
4274 operations on gdb.Value objects.
4275 * gdb.python/py-value-cc.exp: Add new test to test operations on
4278 2014-02-18 Doug Evans <dje@google.com>
4280 * Makefile.in (TESTS): New variable.
4281 (expanded_tests, expanded_tests_or_none): New variables
4282 (check-single): Pass $(expanded_tests_or_none) to runtest.
4283 (check-parallel): Only run tests in $(TESTS) if non-empty.
4284 (check/no-matching-tests-found): New rule.
4285 * README: Document TESTS makefile variable.
4287 2014-02-18 Doug Evans <dje@google.com>
4289 * Makefile.in (check-parallel): rm -rf outputs temp.
4291 2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4293 Fix "ERROR: no fileid for" in the testsuite.
4294 * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
4296 2014-02-12 Doug Evans <dje@google.com>
4298 * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
4299 (MISCELLANEOUS): New variable.
4300 (clean): rm -rf $(MISCELLANEOUS).
4301 * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
4302 dwp live in the same directory as symlinks, with each symlink pointed
4303 to a differently named file in a different directory.
4305 2014-02-11 Doug Evans <dje@google.com>
4307 * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
4308 of Tcl file commands.
4310 2014-02-10 Mark Kettenis <kettenis@gnu.org>
4312 * gdb.threads/step-after-sr-lock.exp: Avoid executing
4315 2014-02-10 Joel Brobecker <brobecker@adacore.com>
4317 * gdb.ada/tick_length_array_enum_idx: New testcase.
4319 2014-02-10 Doug Evans <xdje42@gmail.com>
4321 * configure.ac (AC_OUTPUT): Add gdb.guile.
4322 * configure: Regenerate.
4323 * lib/gdb-guile.exp: New file.
4324 * lib/gdb.exp (get_target_charset): New function.
4325 * gdb.base/help.exp: Update expected output from "apropos apropos".
4326 * gdb.guile/Makefile.in: New file.
4327 * gdb.guile/guile.exp: New file.
4328 * gdb.guile/scm-arch.c: New file.
4329 * gdb.guile/scm-arch.exp: New file.
4330 * gdb.guile/scm-block.c: New file.
4331 * gdb.guile/scm-block.exp: New file.
4332 * gdb.guile/scm-breakpoint.c: New file.
4333 * gdb.guile/scm-breakpoint.exp: New file.
4334 * gdb.guile/scm-disasm.c: New file.
4335 * gdb.guile/scm-disasm.exp: New file.
4336 * gdb.guile/scm-equal.c: New file.
4337 * gdb.guile/scm-equal.exp: New file.
4338 * gdb.guile/scm-error.exp: New file.
4339 * gdb.guile/scm-error.scm: New file.
4340 * gdb.guile/scm-frame-args.c: New file.
4341 * gdb.guile/scm-frame-args.exp: New file.
4342 * gdb.guile/scm-frame-args.scm: New file.
4343 * gdb.guile/scm-frame-inline.c: New file.
4344 * gdb.guile/scm-frame-inline.exp: New file.
4345 * gdb.guile/scm-frame.c: New file.
4346 * gdb.guile/scm-frame.exp: New file.
4347 * gdb.guile/scm-generics.exp: New file.
4348 * gdb.guile/scm-gsmob.exp: New file.
4349 * gdb.guile/scm-iterator.c: New file.
4350 * gdb.guile/scm-iterator.exp: New file.
4351 * gdb.guile/scm-math.c: New file.
4352 * gdb.guile/scm-math.exp: New file.
4353 * gdb.guile/scm-objfile-script-gdb.in: New file.
4354 * gdb.guile/scm-objfile-script.c: New file.
4355 * gdb.guile/scm-objfile-script.exp: New file.
4356 * gdb.guile/scm-objfile.c: New file.
4357 * gdb.guile/scm-objfile.exp: New file.
4358 * gdb.guile/scm-ports.exp: New file.
4359 * gdb.guile/scm-pretty-print.c: New file.
4360 * gdb.guile/scm-pretty-print.exp: New file.
4361 * gdb.guile/scm-pretty-print.scm: New file.
4362 * gdb.guile/scm-section-script.c: New file.
4363 * gdb.guile/scm-section-script.exp: New file.
4364 * gdb.guile/scm-section-script.scm: New file.
4365 * gdb.guile/scm-symbol.c: New file.
4366 * gdb.guile/scm-symbol.exp: New file.
4367 * gdb.guile/scm-symtab-2.c: New file.
4368 * gdb.guile/scm-symtab.c: New file.
4369 * gdb.guile/scm-symtab.exp: New file.
4370 * gdb.guile/scm-type.c: New file.
4371 * gdb.guile/scm-type.exp: New file.
4372 * gdb.guile/scm-value-cc.cc: New file.
4373 * gdb.guile/scm-value-cc.exp: New file.
4374 * gdb.guile/scm-value.c: New file.
4375 * gdb.guile/scm-value.exp: New file.
4376 * gdb.guile/source2.scm: New file.
4377 * gdb.guile/types-module.cc: New file.
4378 * gdb.guile/types-module.exp: New file.
4380 2014-02-10 Yao Qi <yao@codesourcery.com>
4383 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
4384 * configure: Regenerated.
4385 * Makefile.in: New file.
4387 2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
4389 * gdb.python/py-framefilter.exp: Fix typo.
4391 2014-02-08 Yao Qi <yao@codesourcery.com>
4393 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
4394 that no =breakpoint-modified is emitted when breakpoints are
4395 modified through MI commands.
4397 2014-02-07 Pedro Alves <pedro@codesourcery.com>
4398 Pedro Alves <palves@redhat.com>
4400 * gdb.threads/step-after-sr-lock.c: New file.
4401 * gdb.threads/step-after-sr-lock.exp: New file.
4403 2014-02-07 Pedro Alves <palves@redhat.com>
4405 * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
4407 2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
4409 Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
4410 * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
4412 2014-02-06 Doug Evans <xdje42@gmail.com>
4414 * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
4417 * gdb.gdb/python-interrupts.exp: New file.
4419 2014-02-05 Yao Qi <yao@codesourcery.com>
4421 * gdb.trace/report.exp (use_collected_data): Test the output
4422 of "info threads" and "info inferiors".
4424 2014-02-05 Yao Qi <yao@codesourcery.com>
4428 2013-05-24 Yao Qi <yao@codesourcery.com>
4430 * gdb.trace/tfile.exp: Test inferior and thread.
4432 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4434 * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
4436 * gdb.base/step-bt.c: Call hello via function pointer to make
4437 sure its first instruction is executed on powerpc64le-linux.
4439 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4441 * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
4443 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4445 * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
4446 of the test patterns for use on little-endian systems.
4448 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4450 * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
4451 (decimal_vector): Fix for little-endian.
4453 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
4455 * gdb.arch/sparc-sysstep.exp: New file.
4456 * gdb.arch/sparc-sysstep.c: Likewise.
4458 * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
4460 2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4462 * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
4464 2014-01-23 Tom Tromey <tromey@redhat.com>
4466 * gdb.ada/array_char_idx: New testcase.
4468 2014-01-23 Tom Tromey <tromey@redhat.com>
4471 * gdb.python/py-framefilter.exp: Add test using "Error" filter.
4472 * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
4475 2014-01-23 Tom Tromey <tromey@redhat.com>
4478 * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
4479 string from an inferior frame.
4480 * gdb.python/py-framefilter-mi.exp: Update.
4482 2014-01-22 Doug Evans <dje@google.com>
4484 * gdb.server/server-mon.exp: Add tests for "set debug-format".
4486 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4488 * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
4490 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4492 * gdb.trace/entry-values.exp: Remove excess space character from
4493 regex patterns. Handle s390 call instruction.
4495 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4497 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
4498 define "*_start" label. Make "name" static.
4499 * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
4500 ${name} by references to ${name}_start.
4502 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4504 * gdb.base/info-macros.exp: Remove "debug" from the compile
4507 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4509 * gdb.dlang/demangle.exp: New file.
4511 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4513 * gdb.dlang/primitive-types.exp: New file.
4515 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4517 * configure.ac: Create gdb.dlang/Makefile.
4518 * configure: Regenerate.
4519 * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
4520 * gdb.dlang/Makefile.in: New file.
4521 * lib/d-support.exp: New file.
4522 * lib/gdb.exp (skip_d_tests): New proc.
4524 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4526 * gdb.btrace/delta.exp: Check reverse stepi.
4527 * gdb.btrace/tailcall.exp: Update. Add stepping tests.
4528 * gdb.btrace/finish.exp: New.
4529 * gdb.btrace/next.exp: New.
4530 * gdb.btrace/nexti.exp: New.
4531 * gdb.btrace/record_goto.c: Add comments.
4532 * gdb.btrace/step.exp: New.
4533 * gdb.btrace/stepi.exp: New.
4534 * gdb.btrace/multi-thread-step.c: New.
4535 * gdb.btrace/multi-thread-step.exp: New.
4536 * gdb.btrace/rn-dl-bind.c: New.
4537 * gdb.btrace/rn-dl-bind.exp: New.
4538 * gdb.btrace/data.c: New.
4539 * gdb.btrace/data.exp: New.
4540 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4542 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4544 * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
4545 * gdb.btrace/exception.exp: Update.
4546 * gdb.btrace/instruction_history.exp: Update.
4547 * gdb.btrace/record_goto.exp: Update.
4548 * gdb.btrace/tailcall.exp: Update.
4549 * gdb.btrace/unknown_functions.exp: Update.
4550 * gdb.btrace/delta.exp: New.
4552 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4554 * gdb.btrace/record_goto.exp: Add backtrace test.
4555 * gdb.btrace/tailcall.exp: Add backtrace test.
4557 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4559 * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
4560 * gdb.btrace/record_goto.c: New.
4561 * gdb.btrace/record_goto.exp: New.
4562 * gdb.btrace/x86-record_goto.S: New.
4564 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4566 * gdb.btrace/function_call_history.exp: Update tests.
4567 * gdb.btrace/instruction_history.exp: Update tests.
4569 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4571 * gdb.btrace/function_call_history.exp: Fix expected field
4572 order for "record function-call-history".
4573 Add new tests for "record function-call-history /c".
4574 * gdb.btrace/exception.cc: New.
4575 * gdb.btrace/exception.exp: New.
4576 * gdb.btrace/tailcall.exp: New.
4577 * gdb.btrace/x86-tailcall.S: New.
4578 * gdb.btrace/x86-tailcall.c: New.
4579 * gdb.btrace/unknown_functions.c: New.
4580 * gdb.btrace/unknown_functions.exp: New.
4581 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4583 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4585 * gdb.btrace/instruction_history.exp: Update.
4586 * gdb.btrace/function_call_history.exp: Update.
4588 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4590 * gdb.btrace/function_call_history.exp: Fix expected function
4592 * gdb.btrace/instruction_history.exp: Initialize traced.
4593 Remove traced_functions.
4595 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4597 * gdb.btrace/function_call_history.exp: Update
4598 * gdb.btrace/instruction_history.exp: Update.
4600 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4602 * gdb.btrace/enable.exp: Update expected text.
4604 2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
4606 * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
4609 2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
4611 * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
4613 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
4615 * lib/gdb.exp (supports_process_record): Return true for
4616 arm*-linux*. (supports_reverse): Likewise.
4618 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
4622 * gdb.python/py-type.c: Enhance test case.
4623 * gdb.python/py-value-cc.cc: Likewise
4624 * gdb.python/py-type.exp: Add new tests.
4625 * gdb.python/py-value-cc.exp: Likewise
4627 2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
4628 Pedro Alves <palves@redhat.com>
4630 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
4632 * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
4633 references to ${name}_start by references to ${name}.
4635 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4637 * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
4639 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4641 * gdb.python/py-pp-integral.exp: Remove path from "source" test.
4643 2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
4644 Pedro Alves <palves@redhat.com>
4646 * gdb.mi/mi-info-os.exp: Connect to the target with
4649 2014-01-08 Pedro Alves <palves@redhat.com>
4651 * gdb.threads/reconnect-signal.c: New file.
4652 * gdb.threads/reconnect-signal.exp: New file.
4654 2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
4656 * gdb.base/source-dir.exp: New file.
4658 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4660 * gdb.ada/mi_interface: New testcase.
4662 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4664 * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
4665 gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
4666 gdb.ada/pp-rec-component/pck.ads: New files.
4668 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4670 * gdb.python/py-pp-integral.c: New file.
4671 * gdb.python/py-pp-integral.py: New file.
4672 * gdb.python/py-pp-integral.exp: New file.
4674 For older changes see ChangeLog-1993-2013.
4680 ;; version-control: never
4683 Copyright 2014-2015 Free Software Foundation, Inc.
4684 Copying and distribution of this file, with or without modification,
4685 are permitted provided the copyright notice and this notice are preserved.