gdb/testsuite: show evaluation errors in gdb_assert

[deliverable/binutils-gdb.git] / gdb / testsuite / ChangeLog

2020-11-23  Simon Marchi  <simon.marchi@efficios.com>

        * lib/gdb.exp (gdb_assert): Show error message on error.

2020-11-23  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/enum_idx_packed.exp: Limit setup_kfail to gnat 9 and 10.
        * gdb.ada/mod_from_name.exp: Same.
        * gdb.ada/pckd_arr_ren.exp: Same.

2020-11-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/template.exp: New.
        * gdb.base/template.c: New.

2020-11-22  Gary Benson <gbenson@redhat.com>

        PR gdb/26905
        * gdb.dwarf2/count.exp: Add test for an array whose upper bound
        is defined using a DW_AT_count which references another DIE.

2020-11-21  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-ptr.exp: Add XFAIL.

2020-11-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/array-slices-bad.exp: New file.
        * gdb.fortran/array-slices-bad.f90: New file.
        * gdb.fortran/array-slices-sub-slices.exp: New file.
        * gdb.fortran/array-slices-sub-slices.f90: New file.
        * gdb.fortran/array-slices.exp: Rewrite tests.
        * gdb.fortran/array-slices.f90: Rewrite tests.
        * gdb.fortran/vla-sizeof.exp: Correct expected results.

2020-11-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/completion.exp: Add new completion tests.

2020-11-18  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/mi-nonstop-exit.exp: Enable non-stop through GDBFLAGS.
        * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
        * gdb.mi/mi-nsintrall.exp: Likewise.
        * gdb.mi/mi-nsmoribund.exp: Likewise.
        * gdb.mi/mi-nsthrexec.exp: Likewise.
        * gdb.mi/mi-watch-nonstop.exp: Likewise.

2020-11-18  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/mi-support.exp (mi_run_cmd_full): Use unresovled instead
        of perror.

2020-11-18  Joseph Myers  <joseph@codesourcery.com>

        * lib/mi-support.exp (mi_gdb_file_cmd): Check for case where
        $arg.exe exists but $arg does not.

2020-11-17  Gary Benson <gbenson@redhat.com>

        * gdb.trace/trace-common.h (x86_trace_dummy): Add
        __attribute__ ((used)).

2020-11-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.gdb/unittest.exp: Spot 'Running...' lines.

2020-11-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/completion.exp: Add new tests.

2020-11-16  Tom Tromey  <tromey@adacore.com>

        * gdb.dwarf2/data-loc.exp: Update expected output.  Remove C
        tests.

2020-11-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/fixed_cmp.exp: Add -fgnat-encodings=minimal testing.
        * gdb.dwarf2/dw2-fixed-point.c (pck__fp1_var2): New global.
        (main): Add reference to pck__fp1_var2.
        * gdb.dwarf2/dw2-fixed-point.exp: Add comparison operator testing.

2020-11-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dw2-fixed-point.exp: Add arithmetic tests.

2020-11-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/fixed_points.exp: Add ptype tests.
        * gdb.dwarf2/dw2-fixed-point.exp: Likewise.

2020-11-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dw2-fixed-point.exp: Add "print /x" tests.

2020-11-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/fixed_cmp.exp: Force compilation to use -fgnat-encodings=all.
        * gdb.ada/fixed_points.exp: Add fixed-point variables printing tests.
        * gdb.ada/fixed_points/pck.ads, gdb.ada/fixed_points/pck.adb:
        New files.
        * gdb.ada/fixed_points/fixed_points.adb: Add use of package Pck.

        * gdb.dwarf2/dw2-fixed-point.c, gdb.dwarf2/dw2-fixed-point.exp:
        New files.

2020-11-14  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR cli/26879
        * gdb.fortran/completion.exp: New file.
        * gdb.fortran/completion.f90: New file.

2020-11-12  Joseph Myers  <joseph@codesourcery.com>

        * lib/gdb.exp (gdb_file_cmd): Check for case where $arg.exe exists
        but $arg does not.

2020-11-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/types.exp: Add more tests.

2020-11-12  Tom Tromey  <tom@tromey.com>

        PR rust/26799:
        * gdb.rust/traits.exp: Remove kfails.

2020-11-12  Gary Benson <gbenson@redhat.com>

        * gdb.threads/tls-so_extern_main.c (tls_ptr): Add missing return
        statement.

2020-11-11  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/continue-after-aborted-step-over.exp: Add "breakpoint
        always-inserted" axis.
        (do_test): Add breakpoint_always_inserted parameter.

2020-11-10  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/bias.exp: Update.
        * gdb.ada/bias/bias.adb (X): Change value.

2020-11-10  Gary Benson <gbenson@redhat.com>

        * gdb.base/vla-optimized-out.exp (p sizeof (a)): Wrap supplied
        regexp fragment in parentheses to prevent false matching.

2020-11-10  Gary Benson <gbenson@redhat.com>

        * gdb.base/vla-optimized-out.c (f1): Add __attribute__ ((weak)).

2020-11-10  Gary Benson <gbenson@redhat.com>

        * gdb.cp/step-and-next-inline.exp: Only require
        -gstatement-frontiers when building with GCC.
        Only setup KFAIL's for GCC issues when using
        a GCC-built executable.

2020-11-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/debug-expr.c: Add extra function to allow for an
        additional test.
        * gdb.base/debug-expr.exp (test_debug_expr): Delete, replace calls
        to this proc with gdb_test_debug_expr.  Add an extra test.
        * gdb.cp/debug-expr.exp (test_debug_expr): Delete, replace calls
        to this proc with gdb_test_debug_expr, give the tests names
        * gdb.dlang/debug-expr.exp (test_debug_expr): Delete, replace
        calls to this proc with gdb_test_debug_expr, give the tests names
        * gdb.fortran/debug-expr.exp: New file.
        * gdb.fortran/debug-expr.f90: New file.
        * lib/gdb.exp (gdb_test_debug_expr): New proc.

2020-11-06  Simon Marchi  <simon.marchi@efficios.com>

        * lib/dwarf.exp (ranges): Handle "base" and "range" as
        proceduresu.
        * gdb.dwarf/dw2-bad-elf.exp: Adjust.
        * gdb.dwarf2/dw2-inline-many-frames.exp: Adjust.
        * gdb.dwarf2/dw2-inline-stepping.exp: Adjust.
        * gdb.dwarf2/dw2-ranges-base.exp: Adjust.
        * gdb.dwarf2/dw2-ranges-func.exp: Adjust.
        * gdb.dwarf2/dw2-ranges-overlap.exp: Adjust.
        * gdb.dwarf2/dw2-ranges-psym.exp: Adjust.
        * gdb.dwarf2/enqueued-cu-base-addr.exp: Adjust.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/funcall_ref.exp: Update.
        * gdb.ada/var_rec_arr.exp: Update.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/rec_ptype.exp: New file.
        * gdb.ada/rec_ptype/main.adb: New file.
        * gdb.ada/rec_ptype/p.ads: New file.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/tick_length_array_enum_idx.exp: Add ptype test.
        * gdb.ada/tick_length_array_enum_idx/foo_n207_004.adb
        (PT_Full): New variable.
        * gdb.ada/tick_length_array_enum_idx/pck.adb
        (Full_PT): New type.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/array_of_variant.exp: New file.
        * gdb.ada/array_of_variant/p.adb: New file.
        * gdb.ada/array_of_variant/pck.ads: New file.
        * gdb.ada/array_of_variant/pck.adb: New file.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/enum_idx_packed.exp: Add test.
        * gdb.ada/enum_idx_packed/foo.adb (Multi_Access):
        New variable.
        * gdb.ada/enum_idx_packed/pck.ads (Short)
        (Multi_Dimension, Multi_Dimension_Access): New types.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/enum_idx_packed.exp: Test two forms of -fgnat-encodings.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/set_pckd_arr_elt.exp: Also test
        -fgnat-encodings=minimal.  Add tests.
        * gdb.ada/set_pckd_arr_elt/foo.adb (Foo): Add VA variable.
        Call Update_Small a second time.
        * gdb.ada/set_pckd_arr_elt/pck.adb (New_Variant): New function.
        * gdb.ada/set_pckd_arr_elt/pck.ads (Buffer, Variant)
        (Variant_Access): New types.
        (New_Variant): Declare.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mod_from_name.exp: Test printing slice.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/O2_float_param.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/access_to_unbounded_array.exp: Test different
        -fgnat-encodings values.
        * gdb.ada/big_packed_array.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/arr_enum_idx_w_gap.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/array_ptr_renaming.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/array_of_variable_length.exp: Test different
        -fgnat-encodings values.
        * gdb.ada/arrayparam.exp: Test different -fgnat-encodings values.
        * gdb.ada/arrayptr.exp: Test different -fgnat-encodings values.
        * gdb.ada/frame_arg_lang.exp: Revert -fgnat-encodings=minimal
        change.
        * gdb.ada/mi_string_access.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/mod_from_name.exp: Test different -fgnat-encodings values.
        * gdb.ada/out_of_line_in_inlined.exp: Test different
        -fgnat-encodings values.
        * gdb.ada/packed_array.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/pckd_arr_ren.exp: Test different -fgnat-encodings
        values.
        * gdb.ada/unc_arr_ptr_in_var_rec.exp: Test different
        -fgnat-encodings values.
        * gdb.ada/variant_record_packed_array.exp: Test different
        -fgnat-encodings values.

2020-11-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/enum_idx_packed.exp: Add tests.
        * gdb.ada/enum_idx_packed/foo.adb: Add variables.
        * gdb.ada/enum_idx_packed/pck.adb: Add functions.
        * gdb.ada/enum_idx_packed/pck.ads: Add types, function
        declarations.

2020-11-03  Tom de Vries  <tdevries@suse.de>

        * lib/dwarf.exp (Dwarf::_handle_DW_TAG): Improve attribute list
        terminator comments.
        (Dwarf::cu, Dwarf::tu): Remove superfluous abbreviation table
        terminator.

2020-11-02  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/step-over-no-symbols.exp (test_step_over): Replace
        integer format test with regexp.

2020-11-02  Gary Benson <gbenson@redhat.com>

        * gdb.base/print-file-var.exp (test): Separate compiler and
        linker options, and build using build_executable_from_specs
        to accommodate this.

2020-11-02  Gary Benson <gbenson@redhat.com>

        * lib/gdb.exp (gdb_compile): Inhibit passing "-x c++"
        for .c files compiled as C++ with Clang if any shared
        libraries are specified.

2020-11-02  Gary Benson <gbenson@redhat.com>

        * lib/attributes.h: New header.
        * gdb.base/backtrace.c: Include the above. Replace
        __attribute__(noclone)) with ATTRIBUTE_NOCLONE.
        * gdb.base/infcall-nested-structs.c: Likewise.
        * gdb.base/vla-optimized-out.c: Likewise.

2020-11-02  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/fission-multi-cu.S: Remove .debug_line.dwo section.

2020-11-01  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/fixed_points/fixed_points.adb: Replace use of
        System.Min_Int and System.Max_Int with smaller hardcoded
        constants.

2020-10-31  Simon Marchi  <simon.marchi@polymtl.ca>

        * configure.ac: Split AC_INIT into AC_INIT and AC_CONFIG_SRCDIR.
        * configure: Re-generate.

2020-10-30  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.arch/amd64-disp-step-avx.exp: Update displaced step debug
        expected output.

2020-10-30  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/paginate-after-ctrl-c-running.exp: Update with no pagination
        behavior.
        * gdb.base/paginate-bg-execution.exp: Ditto.
        * gdb.base/paginate-inferior-exit.exp: Ditto.
        * gdb.base/double-prompt-target-event-error.c: Remove.
        * gdb.base/double-prompt-target-event-error.exp: Remove.

2020-10-29  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/kill-detach-inferiors-cmd.exp: Check that 'kill
        inferiors' and 'detach inferiors' do not change the current
        inferior.

2020-10-29  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/tls.exp: Fix DUPLICATEs.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.python/py-symbol.exp: Add KFAILs for -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/exec_changed.exp: Add KFAILs for -readnow.
        * gdb.base/reread.exp: Same.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (readnow): Handle arg.
        * gdb.rust/traits.exp: Add KFAILs for -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/relocate.exp: Update regexp for -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-error.exp: Mark failure break in main as known with
        -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        PR symtab/26772
        * gdb.dwarf2/dw2-ranges-overlap.c: New test.
        * gdb.dwarf2/dw2-ranges-overlap.exp: New file.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_file_cmd): Set gdb_file_cmd_msg.
        * gdb.cp/nsalias.exp: Set complaints limit before file cmd.  Expect
        complaint during file command for -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/nsalias.exp: Fix typo in test name.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-filename.exp: Update regexp for -readnow.

2020-10-28  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-stack-boundary.exp: KFAILing the complaints for
        -readnow.

2020-10-27  Tom de Vries  <tdevries@suse.de>

        * gdb.base/multi-forks.exp: Use exp_continue to fix timeout.

2020-10-27  Tom de Vries  <tdevries@suse.de>

        * gdb.base/maint.exp: Update for -readnow.

2020-10-27  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/psymtab-parameter.exp: Don't expect unexpanded CU for
        -readnow.

2020-10-14  Gary Benson <gbenson@redhat.com>

        * gdb.python/py-format-string.exp (test_deref_refs): Treat
        "_vptr$Base" as correct, in addition to "_vptr.Base".
        (test_mixed): Likewise.

2020-10-27  Gary Benson <gbenson@redhat.com>

        * gdb.mi/mi-fortran-modules.exp: Check skip_fortran_tests.
        * gdb.mi/mi-vla-fortran.exp: Likewise.  Also fix a comment.

2020-10-27  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/condbreak.exp: Update the completion tests to
        consider the '-force' flag.

2020-10-27  Tom de Vries  <tdevries@suse.de>

        * gdb.base/list-ambiguous-readnow.exp: New file.

2020-10-27  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/condbreak-multi-context.exp: Expand to test forcing
        the condition.
        * gdb.linespec/cpcompletion.exp: Update to consider the
        '-force-condition' keyword.
        * gdb.linespec/explicit.exp: Ditto.
        * lib/completion-support.exp: Ditto.

2020-10-27  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/condbreak-multi-context.cc: New file.
        * gdb.base/condbreak-multi-context.exp: New file.

2020-10-26  Tom Tromey  <tom@tromey.com>

        * lib/mi-support.exp (default_mi_gdb_start): Call
        gdb_stdin_log_init.
        * lib/gdb.exp (standard_output_file_with_gdb_instance): Don't
        subtract one from gdb_instances.
        (gdb_stdin_log_write): Flush in_file.

2020-10-26  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/enqueued-cu-base-addr.exp: New file.

2020-10-26  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/unsigned_range/foo.adb: New file.
        * gdb.ada/unsigned_range/pack.adb: New file.
        * gdb.ada/unsigned_range/pack.ads: New file.
        * gdb.ada/unsigned_range.exp: New file.

2020-10-26  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (INTERNAL_GDBFLAGS): Set heigth and width.

2020-10-26  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-objfile-overlap-inner.S: Specify default base address
        for CU.
        * gdb.dwarf2/dw2-objfile-overlap-outer.S: Same.

2020-10-23  Tom de Vries  <tdevries@suse.de>

        * lib/dwarf.exp (Dwarf::_guess_form): Return "" by default instead of
        DW_FORM_string.
        (Dwarf::_default_form): New proc.
        (Dwarf::_handle_DW_TAG): Use _default_form.  Error out if no form was
        guessed.

2020-10-23  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/ada-linkage-name.exp: Use $srcfile for DW_AT_name of CU.
        * gdb.dwarf2/atomic-type.exp: Same.
        * gdb.dwarf2/bad-regnum.exp: Same.
        * gdb.dwarf2/cpp-linkage-name.exp: Same.
        * gdb.dwarf2/dw2-align.exp: Same.
        * gdb.dwarf2/dw2-bad-elf.exp: Same.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Same.
        * gdb.dwarf2/dw2-bad-unresolved.exp: Same.
        * gdb.dwarf2/dw2-namespaceless-anonymous.exp: Same.
        * gdb.dwarf2/dw2-opt-structptr.exp: Same.
        * gdb.dwarf2/dw2-unusual-field-names.exp: Same.
        * gdb.dwarf2/enum-type.exp: Same.
        * gdb.dwarf2/frame-inlined-in-outer-frame.exp: Same.
        * gdb.dwarf2/info-locals-optimized-out.exp: Same.
        * gdb.dwarf2/main-subprogram.exp: Same.
        * gdb.dwarf2/missing-type-name.exp: Same.
        * gdb.dwarf2/nonvar-access.exp: Same.
        * gdb.dwarf2/typedef-void-finish.exp: Same.
        * gdb.dwarf2/var-access.exp: Same.
        * gdb.dwarf2/void-type.exp: Same.

2020-10-22  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/26693
        * gdb.dwarf2/template-specification-full-name.exp: New test.

2020-10-22  Luis Machado  <luis.machado@linaro.org>

        * gdb.base/msym-bp-shl.exp (test_break): Adjust pattern to not
        expected an offset from the function.
        * gdb.base/msym-bp.exp (test): Likewise.

2020-10-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/array-slices.exp: Add a new test.

2020-10-21  Gary Benson <gbenson@redhat.com>

        * gdb.mi/mi-fullname-deleted.exp: Fix substituted
        fullname test with Clang.  Also expand comments generally.

2020-10-20  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/pr13961.S: Remove superfluous end-of-siblings marker.

2020-10-20  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/arr-stride.c: Remove.
        * gdb.dwarf2/arr-stride.exp: Use main.c.
        * gdb.dwarf2/arr-subrange.c: Remove.
        * gdb.dwarf2/arr-subrange.exp: Use main.c.
        * gdb.dwarf2/bad-regnum.c: Remove.
        * gdb.dwarf2/bad-regnum.exp: Use main.c.
        * gdb.dwarf2/corrupt.c: Remove.
        * gdb.dwarf2/corrupt.exp: Use main.c.
        * gdb.dwarf2/dw2-bad-elf.c: Remove.
        * gdb.dwarf2/dw2-bad-elf.exp: Use main.c.
        * gdb.dwarf2/dw2-icycle.c: Remove.
        * gdb.dwarf2/dw2-icycle.exp: Use main.c.
        * gdb.dwarf2/formdata16.c: Remove.
        * gdb.dwarf2/formdata16.exp: Use main.c.
        * gdb.dwarf2/implptrconst.c: Remove.
        * gdb.dwarf2/implptrconst.exp: Use main.c.
        * gdb.dwarf2/info-locals-optimized-out.c: Remove.
        * gdb.dwarf2/info-locals-optimized-out.exp: Use main.c.
        * gdb.dwarf2/opaque-type-lookup.c: Remove.
        * gdb.dwarf2/opaque-type-lookup.exp: Use main.c.

2020-10-20  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/ada-valprint-error.exp: Remove redundant mention of .exp
        file.
        * gdb.dwarf2/dw2-dir-file-name.exp: Same.

2020-10-20  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-error.exp: Use $gdb_test_file_name.
        * gdb.dwarf2/dw2-line-number-zero.exp: Same.
        * gdb.dwarf2/dw2-main-no-line-number.exp: Same.
        * gdb.dwarf2/dw2-ranges-base.exp: Same.
        * gdb.dwarf2/dw2-ranges.exp: Same.
        * gdb.dwarf2/dw2-vendor-extended-opcode.exp: Same.
        * gdb.dwarf2/var-access.exp: Same.

2020-10-19  Tom Tromey  <tromey@adacore.com>

        PR tui/26719
        * gdb.tui/list.exp: Check source window contents after focus
        change.

2020-10-17  Tom de Vries  <tdevries@suse.de>

        PR symtab/26317
        * gdb.dwarf2/dw2-main-no-line-number.exp: New file.

2020-10-17  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (standard_testfile): Also treat args starting with '-'
        as suffix.
        * gdb.dwarf2/atomic.c: Rename to ...
        * gdb.dwarf2/atomic-type.c: ... this.
        * gdb.dwarf2/dw2-ranges2.c: Rename to ...
        * gdb.dwarf2/dw2-ranges-2.c: ... this.
        * gdb.dwarf2/dw2-ranges3.c: Rename to ...
        * gdb.dwarf2/dw2-ranges-3.c: ... this.
        * gdb.dwarf2/fission-mix2.c: Rename to ...
        * gdb.dwarf2/fission-mix-2.c: ... this.
        * gdb.dwarf2/ada-linkage-name.exp: Use more suffix args for
        standard_testfile.
        * gdb.dwarf2/ada-valprint-error.exp: Same.
        * gdb.dwarf2/arr-stride.exp: Same.
        * gdb.dwarf2/arr-subrange.exp: Same.
        * gdb.dwarf2/atomic-type.exp: Same.
        * gdb.dwarf2/bad-regnum.exp: Same.
        * gdb.dwarf2/break-inline-psymtab.exp: Same.
        * gdb.dwarf2/clang-debug-names-2.exp: Same.
        * gdb.dwarf2/clang-debug-names.exp: Same.
        * gdb.dwarf2/comp-unit-lang.exp: Same.
        * gdb.dwarf2/corrupt.exp: Same.
        * gdb.dwarf2/count.exp: Same.
        * gdb.dwarf2/cpp-linkage-name.exp: Same.
        * gdb.dwarf2/data-loc.exp: Same.
        * gdb.dwarf2/dw2-align.exp: Same.
        * gdb.dwarf2/dw2-bad-elf.exp: Same.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Same.
        * gdb.dwarf2/dw2-bad-unresolved.exp: Same.
        * gdb.dwarf2/dw2-case-insensitive.exp: Same.
        * gdb.dwarf2/dw2-cp-infcall-ref-static.exp: Same.
        * gdb.dwarf2/dw2-ifort-parameter.exp: Same.
        * gdb.dwarf2/dw2-inline-many-frames.exp: Same.
        * gdb.dwarf2/dw2-inline-param.exp: Same.
        * gdb.dwarf2/dw2-inline-small-func.exp: Same.
        * gdb.dwarf2/dw2-inline-stepping.exp: Same.
        * gdb.dwarf2/dw2-is-stmt-2.exp: Same.
        * gdb.dwarf2/dw2-is-stmt.exp: Same.
        * gdb.dwarf2/dw2-line-number-zero.exp: Same.
        * gdb.dwarf2/dw2-namespaceless-anonymous.exp: Same.
        * gdb.dwarf2/dw2-opt-structptr.exp: Same.
        * gdb.dwarf2/dw2-param-error.exp: Same.
        * gdb.dwarf2/dw2-ranges-base.exp: Same.
        * gdb.dwarf2/dw2-ranges.exp: Same.
        * gdb.dwarf2/dw2-unusual-field-names.exp: Same.
        * gdb.dwarf2/dw2-vendor-extended-opcode.exp: Same.
        * gdb.dwarf2/dw4-sig-types.exp: Same.
        * gdb.dwarf2/dynarr-ptr.exp: Same.
        * gdb.dwarf2/enum-type.exp: Same.
        * gdb.dwarf2/fission-mix.exp: Same.
        * gdb.dwarf2/formdata16.exp: Same.
        * gdb.dwarf2/implptrconst.exp: Same.
        * gdb.dwarf2/implptrpiece.exp: Same.
        * gdb.dwarf2/info-locals-optimized-out.exp: Same.
        * gdb.dwarf2/main-subprogram.exp: Same.
        * gdb.dwarf2/method-ptr.exp: Same.
        * gdb.dwarf2/missing-sig-type.exp: Same.
        * gdb.dwarf2/nonvar-access.exp: Same.
        * gdb.dwarf2/opaque-type-lookup.exp: Same.
        * gdb.dwarf2/shortpiece.exp: Same.
        * gdb.dwarf2/staticvirtual.exp: Same.
        * gdb.dwarf2/subrange.exp: Same.
        * gdb.dwarf2/symtab-producer.exp: Same.
        * gdb.dwarf2/typedef-void-finish.exp: Same.
        * gdb.dwarf2/var-access.exp: Same.
        * gdb.dwarf2/variant.exp: Same.
        * gdb.dwarf2/void-type.exp: Same.
        * gdb.dwarf2/dw2-ranges-psym.exp: Same.  Use main.c instead of
        dw2-ranges-main.c.
        * gdb.dwarf2/dw2-ranges-main.c: Remove.

2020-10-16  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_breakpoint): Remove mention of "passfail".

2020-10-16  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_breakpoint): Handle eof as in gdb_test_multiple.

2020-10-14  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26732
        * gdb.ada/mi_catch_ex.exp: Do mi_delete_breakpoints before running
        scenario 2.
        * gdb.ada/mi_catch_ex_hand.exp: Same.

2020-10-13  Pedro Alves  <pedro@palves.net>

        * lib/mi-support.exp (mi_clean_restart): New.
        (mi_run_to_main): Delete.
        All callers adjust to use mi_clean_restart / mi_runto_main.

2020-10-13  Pedro Alves  <pedro@palves.net>

        * config/monitor.exp: Use "list -q".
        * gdb.arch/gdb1558.exp: Use "break -q".
        * gdb.arch/i386-permbkpt.exp: Use "break -q".
        * gdb.arch/i386-prologue-skip-cf-protection.exp: Use "break -q".
        * gdb.base/break.exp: Use "break -q", "list -q" and "tbreak -q".
        * gdb.base/commands.exp: Use "break -q".
        * gdb.base/condbreak.exp: Use "break -q".
        * gdb.base/ctf-ptype.exp: Use "list -q".
        * gdb.base/define.exp: Use "break -q".
        * gdb.base/del.exp: Use "break -q".
        * gdb.base/fullname.exp: Use "break -q".
        * gdb.base/hbreak-in-shr-unsupported.exp: Use "hbreak -q".
        * gdb.base/hbreak-unmapped.exp: Use "hbreak -q".
        * gdb.base/hbreak2.exp: Use "hbreak -q" and "list -q".
        * gdb.base/hw-sw-break-same-address.exp: Use "break -q" and
        "hbreak -q".
        * gdb.base/included.exp: Use "list -q".
        * gdb.base/label.exp: Use "break -q".
        * gdb.base/lineinc.exp: Use "break -q".
        * gdb.base/list.exp: Use "list -q".
        * gdb.base/macscp.exp: Use "list -q".
        * gdb.base/pending.exp: Use "break -q".
        * gdb.base/prologue-include.exp: Use "break -q".
        * gdb.base/ptype.exp: Use "list -q".
        * gdb.base/sepdebug.exp: Use "break -q", "list -q" and "tbreak -q".
        * gdb.base/server-del-break.exp: Use "break -q".
        * gdb.base/style.exp: Use "break -q".
        * gdb.base/symbol-without-target_section.exp: Use "list -q".
        * gdb.base/watchpoint-reuse-slot.exp: Use "hbreak -q".
        * gdb.cp/exception.exp: Use "tbreak -q".
        * gdb.dwarf2/dw2-error.exp: Use "break -q".
        * gdb.dwarf2/fission-mix.exp: Use "break -q".
        * gdb.dwarf2/fission-reread.exp: Use "break -q".
        * gdb.dwarf2/pr13961.exp: Use "break -q".
        * gdb.linespec/explicit.exp: Use "list -q".
        * gdb.linespec/linespec.exp: Use "break -q".
        * gdb.mi/mi-simplerun.exp: Use "--qualified".
        * gdb.python/py-mi-objfile-gdb.py: Use "list -q".
        * gdb.server/bkpt-other-inferior.exp: Use "break -q".
        * gdb.server/connect-without-multi-process.exp: Use "break -q".
        * gdb.trace/change-loc.exp: Use "break -q".
        * gdb.trace/pending.exp: Use "break -q".
        * gdb.tui/basic.exp: Use "list -q".
        * gdb.tui/list-before.exp: Use "list -q".
        * gdb.tui/list.exp: Use "list -q".
        * lib/gdb.exp (gdb_has_argv0): Use "break -q".

2020-10-13  Pedro Alves  <pedro@palves.net>

        * gdb.base/ui-redirect.exp: Expect "break -qualified main" in
        saved breakpoints file.
        * gdb.guile/scm-breakpoint.exp: Expect "-qualified main" when
        inspecting breakpoint list.
        * lib/gdb.exp (runto_main): Add "qualified" to options.
        * lib/mi-support.exp (mi_runto_helper): Add 'qualified' parameter,
        and handle it.
        (mi_runto_main): Pass 1 as qualified argument.

2020-10-13  Pedro Alves  <pedro@palves.net>

        * lib/mi-support.exp (mi_runto_main): New proc.
        (mi_run_to_main): Use it.
        * gdb.mi/mi-catch-cpp-exceptions.exp: Likewise.
        * gdb.mi/mi-var-cmd.exp: Likewise.
        * gdb.mi/mi-var-invalidate.exp: Likewise.
        * mi-var-list-children-invalid-grandchild.exp: Likewise.
        * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
        * gdb.mi/new-ui-mi-sync.exp: Likewise.
        * gdb.mi/user-selected-context-sync.exp: Likewise.
        * gdb.opt/inline-cmds.exp: Likewise.
        * gdb.python/py-framefilter-mi.exp: Likewise.
        * gdb.python/py-mi.exp: Likewise.

2020-10-13  Pedro Alves  <pedro@palves.net>

        * gdb.ada/fun_in_declare.exp: Use "runto_main" instead of
        "runto main".
        * gdb.ada/small_reg_param.exp: Likewise.
        * gdb.arch/powerpc-d128-regs.exp: Likewise.
        * gdb.base/annota1.exp: Likewise.
        * gdb.base/anon.exp: Likewise.
        * gdb.base/breakpoint-in-ro-region.exp: Likewise.
        * gdb.base/dprintf-non-stop.exp: Likewise.
        * gdb.base/dprintf.exp: Likewise.
        * gdb.base/gdb11530.exp: Likewise.
        * gdb.base/gdb11531.exp: Likewise.
        * gdb.base/gnu_vector.exp: Likewise.
        * gdb.base/interrupt-noterm.exp: Likewise.
        * gdb.base/memattr.exp: Likewise.
        * gdb.base/step-over-syscall.exp: Likewise.
        * gdb.base/watch-cond-infcall.exp: Likewise.
        * gdb.base/watch-read.exp: Likewise.
        * gdb.base/watch-vfork.exp: Likewise.
        * gdb.base/watch_thread_num.exp: Likewise.
        * gdb.base/watchpoint-stops-at-right-insn.exp: Likewise.
        * gdb.guile/scm-frame-inline.exp: Likewise.
        * gdb.linespec/explicit.exp: Likewise.
        * gdb.opt/inline-break.exp: Likewise.
        * gdb.python/py-frame-inline.exp: Likewise.
        * gdb.reverse/break-precsave.exp: Likewise.
        * gdb.reverse/break-reverse.exp: Likewise.
        * gdb.reverse/consecutive-precsave.exp: Likewise.
        * gdb.reverse/consecutive-reverse.exp: Likewise.
        * gdb.reverse/finish-precsave.exp: Likewise.
        * gdb.reverse/finish-reverse.exp: Likewise.
        * gdb.reverse/fstatat-reverse.exp: Likewise.
        * gdb.reverse/getresuid-reverse.exp: Likewise.
        * gdb.reverse/i386-precsave.exp: Likewise.
        * gdb.reverse/i386-reverse.exp: Likewise.
        * gdb.reverse/i386-sse-reverse.exp: Likewise.
        * gdb.reverse/i387-env-reverse.exp: Likewise.
        * gdb.reverse/i387-stack-reverse.exp: Likewise.
        * gdb.reverse/insn-reverse.exp: Likewise.
        * gdb.reverse/machinestate-precsave.exp: Likewise.
        * gdb.reverse/machinestate.exp: Likewise.
        * gdb.reverse/pipe-reverse.exp: Likewise.
        * gdb.reverse/readv-reverse.exp: Likewise.
        * gdb.reverse/recvmsg-reverse.exp: Likewise.
        * gdb.reverse/rerun-prec.exp: Likewise.
        * gdb.reverse/s390-mvcle.exp: Likewise.
        * gdb.reverse/solib-precsave.exp: Likewise.
        * gdb.reverse/solib-reverse.exp: Likewise.
        * gdb.reverse/step-precsave.exp: Likewise.
        * gdb.reverse/step-reverse.exp: Likewise.
        * gdb.reverse/time-reverse.exp: Likewise.
        * gdb.reverse/until-precsave.exp: Likewise.
        * gdb.reverse/until-reverse.exp: Likewise.
        * gdb.reverse/waitpid-reverse.exp: Likewise.
        * gdb.reverse/watch-precsave.exp: Likewise.
        * gdb.reverse/watch-reverse.exp: Likewise.
        * gdb.threads/kill.exp: Likewise.
        * gdb.threads/tid-reuse.exp: Likewise.

2020-10-13  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/26642
        * gdb.base/maint-target-async-off.c: New test.
        * gdb.base/maint-target-async-off.exp: New test.

2020-10-13  Alan Modra  <amodra@gmail.com>

        * gdb.arch/powerpc-altivec.s,
        * gdb.arch/powerpc-power7.s,
        * gdb.arch/powerpc-power8.s,
        * gdb.arch/powerpc-power9.s,
        * gdb.arch/powerpc-vsx.s,
        * gdb.arch/powerpc-vsx2.s: Remove duplicate instructions.
        * gdb.arch/powerpc-altivec.exp,
        * gdb.arch/powerpc-power7.exp,
        * gdb.arch/powerpc-power8.exp,
        * gdb.arch/powerpc-power9.exp,
        * gdb.arch/powerpc-vsx.exp,
        * gdb.arch/powerpc-vsx2.exp: Likewise, and update expected
        disassembly of mfvsrd/mtvsrd.

2020-10-13  Alan Modra  <amodra@gmail.com>

        * gdb.arch/arm-disassembler-options.exp: Adjust expected
        "target architecture" output.
        * gdb.arch/powerpc-d128-regs.exp: Likewise.
        * gdb.arch/powerpc-disassembler-options.exp: Likewise.
        * gdb.arch/ppc64-symtab-cordic.exp: Likewise.
        * gdb.arch/s390-disassembler-options.exp: Likewise.

2020-10-12  Pedro Alves  <pedro@palves.net>

        PR exp/26602
        PR c++/26550
        * gdb.cp/ambiguous.cc (marker1): Delete.
        (main): Initialize all the fields of the locals.  Replace marker1
        call with a "set breakpoint here" marker.
        * gdb.cp/ambiguous.exp: Modernize.  Use gdb_continue_to_breakpoint
        instead of running to marker1.  Add tests printing all the
        variables and all the fields of the variables.
        (test_ambiguous): New proc, expecting the new GDB output when a
        field access is ambiguous.  Change all "warning: X ambiguous"
        tests to use it.

2020-10-12  Gary Benson <gbenson@redhat.com>

        * gdb.base/msym-bp.c (foo): Add __attribute__ ((used)).
        * gdb.base/msym-bp-2.c (foo): Likewise.
        * gdb.base/msym-lang.c (foo): Likewise.
        * gdb.base/msym-lang-main.c (foo): Likewise.
        * gdb.base/symtab-search-order-1.c (static_global): Likewise.
        * gdb.guile/scm-pretty-print.c (eval_func): Likewise.
        * gdb.mi/mi-sym-info-1.c (global_f1): Likewise.
        * gdb.mi/mi-sym-info-2.c (global_f1, var1, var2): Likewise.
        * gdb.multi/watchpoint-multi-exit.c (globalvar): Likewise.
        * gdb.python/py-as-string.c (enum_valid, enum_invalid): Likewise.
        * gdb.python/py-objfile.c (static_var): Likewise.
        * gdb.python/py-symbol.c (rr): Likewise.
        * gdb.python/py-symbol-2.c (anon, rr): Likewise.
        * gdb.mi/mi-sym-info.exp (lineno1, lineno2): Updated.

2020-10-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/mixed-lang-stack.exp (run_tests): Update expected
        output of backtrace.

2020-10-09  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/scalar_storage/storage.adb (Another_Range): New type.
        (Rec): Add field.  Fix range.
        * gdb.ada/scalar_storage.exp: Update.

2020-10-09  Hannes Domani  <ssbssa@yahoo.de>

        PR exp/26714
        * gdb.base/printcmds.exp: Add tests for void results.

2020-10-09  Jan Vrany  <jan.vrany@labware.com>

        * gdb.mi/mi-cmd-param-changed.exp: Check that notification is
        is emmited for both 'set directories' and 'directory' commands.

2020-10-08  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Check that "main"'s name is styled.

2020-10-07  Tom Tromey  <tromey@adacore.com>

        * gdb.base/find.exp: Rename some tests.

2020-10-06  Gary Benson <gbenson@redhat.com>

        * gdb.base/list0.c (unused): Add __attribute__ ((used)).
        * gdb.base/list1.c (unused): Likewise.

2020-10-06  Gary Benson <gbenson@redhat.com>

        * gdb.base/list-ambiguous0.c (ambiguous_var): Add
        __attribute__ ((used)).
        * gdb.base/list-ambiguous1.c (ambiguous_var): Likewise.

2020-10-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/m32r.ld: Remove SEARCH_DIR line.  Add MEMORY regions,
        make use of regions throughout.
        * gdb.base/overlays.exp: Enclose string with variableds in "..",
        not {...}.
        * gdb.base/ovlymgr.c: Add 'string.h' and 'stdlib.h' includes.

2020-10-05  Hannes Domani  <ssbssa@yahoo.de>

        * gdb.base/call-sc.c: Fix return struct on stack test case.
        * gdb.base/call-sc.exp: Likewise.

2020-10-02  Gary Benson <gbenson@redhat.com>

        * README: Fix "paralell".

2020-09-30  Gary Benson <gbenson@redhat.com>

        * gdb.dwarf2/dw2-double-set-die-type.S (.Ldie_3e0):
        Convert directive to lowercase.
        (.Labbrev1_begin): Add missing label.
        (abbrev code 0x1): Remove DW_AT_stmt_list.
        (.Ldie_b): Likewise.

2020-09-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/new-layout.exp: Use with_test_prefix.

2020-09-26  Gareth Rees <grees@undo.io>  (tiny change)

        PR python/26586
        * gdb.python/python.exp: add test cases for the from_tty
        argument to gdb.execute.

2020-09-25  Gary Benson <gbenson@redhat.com>

        * gdb.base/infcall-nested-structs.exp.tcl: Add
        additional_flags=-Wno-tautological-compare for C++
        tests when compiling using Clang.

2020-09-25  Gary Benson <gbenson@redhat.com>

        * lib/gdb.exp (gdb_compile): Pass "-x c++" earlier, and only
        for .c files.

2020-09-24  Tom Tromey  <tromey@adacore.com>

        PR tui/26638:
        * gdb.tui/list.exp: Check output of "focus next".

2020-09-23  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/intbits.exp: New file.
        * gdb.dwarf2/intbits.c: New file.

2020-09-20  Pedro Alves  <pedro@palves.net>

        * lib/mi-support.exp (mi_uncatched_gdb_exit) Switch to the main
        spawn_id before calling remote_close.  Close secondary MI channel.

2020-09-20  Pedro Alves  <pedro@palves.net>

        * gdb.base/testenv.exp (find_env): Bail out if printing 'envp[$i]'
        fails.

2020-09-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/array-slices.exp: Update expected results.
        * gdb.fortran/class-allocatable-array.exp: Likewise.
        * gdb.fortran/multi-dim.exp: Likewise.
        * gdb.fortran/vla-type.exp: Likewise.
        * gdb.mi/mi-vla-fortran.exp: Likewise.

2020-09-18  Victor Collod  <vcollod@nvidia.com>

        PR gdb/26635
        * gdb.arch/amd64-prologue-skip-cf-protection.exp: Make the test
        compatible with i386, and move it to...
        * gdb.arch/i386-prologue-skip-cf-protection.exp: ... here.
        * gdb.arch/amd64-prologue-skip-cf-protection.c: Move to...
        * gdb.arch/i386-prologue-skip-cf-protection.c: ... here.

2020-09-18  Pedro Alves  <pedro@palves.net>

        PR gdb/26631
        * gdb.multi/multi-target-thread-find.exp: New file.

2020-09-18  Pedro Alves  <pedro@palves.net>

        * gdb.multi/multi-target-continue.exp: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target-info-inferiors.exp: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target-interrupt.exp: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target-no-resumed.exp: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target-ping-pong-next.exp: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target.exp.tcl: New file, factored out from
        multi-target.exp.
        * gdb.multi/multi-target.exp: Delete.

2020-09-18  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/array-slices.exp: Add missing message data.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.cp/call-c-1.c (foo) [__cplusplus]: Add extern "C".

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.python/py-frame-inline.exp: Adjust to optionally expect a
        full prototype.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.python/py-as-string.c: Add cast.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/sizeof.c (fill): Add cast.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/share-env-with-gdbserver.c (main): Add cast.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/prologue.c [__cplusplus] (marker): Explicitly specify
        linkage name.
        * gdb.base/prologue.exp: Use print /d.
        * gdb.base/symbol-alias.exp: Handle C++ output.
        * gdb.base/symbol-alias2.c: Handle C++ output.
        [__cplusplus] (func): Explicitly specify linkage name.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.python/py-nested-maps.c (struct key_t): Rename to...
        (struct my_key_t): ... this.  Adjust all references.
        (struct value_t): Rename to ...
        (struct my_value_t): ... this.  Adjust all references.
        (create_map, add_map_element, create_map_map)
        (add_map_map_element): Add casts.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.python/py-framefilter-mi.c (funca): Add casts.
        * gdb.python/py-framefilter.c.c (funca, func2): Add casts.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.mi/var-cmd.c (do_anonymous_type_tests): Add cast.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/exprs.c: Replace 'this' with 'self' throughout.
        * gdb.base/ptype.c: : Replace 'this' with 'self' throughout.
        (charfoo, intfoo): Define full prototype.
        * gdb.base/ptype1.c (charfoo): Define full prototype.
        * gdb.base/setvar.c: Replace 'this' with 'self' throughout.
        * gdb.base/whatis.c: Replace 'this' with 'self' throughout.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/charset.c [__cplusplus] (wchar_t, char16_t, char32_t):
        Don't define.
        (utf_32_string): Compile for both C and C++.
        * gdb.base/charset.exp: Use "print /d".

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/watchpoint.c (buf): Make it 31 bytes.
        (nullptr): Rename to ...
        (null_ptr): ... this.
        * gdb.base/watchpoint.exp: Adjust to rename.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/printcmds.c (three, flag_enum_without_zero)
        (three_not_flag): Add casts.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/examine-backward.c (Barrier, TestStrings): Now unsigned
        char array.
        (main): Add references to Barrier, TestStrings, TestStringsH and
        TestStringsW.
        * gdb.base/examine-backward.exp: Issue "set print asm-demangle on"
        and expect a full prototype in C++.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/nested-addr.c (main): Add cast.
        * gdb.base/nested-addr.exp: Use "print /d".

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/break.exp (func): New.  Use it throughout when
        expecting a function name.

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/display.exp: Issue "set print asm-demangle on".

2020-09-17  Pedro Alves  <pedro@palves.net>

        * gdb.base/find.c: Include <string.h>.
        (init_bufs): Add cast.
        * gdb.base/find.exp: Issue "set print asm-demangle on".

2020-09-16  Tom Tromey  <tromey@adacore.com>

        PR gdb/26598:
        * gdb.base/skipcxx.exp: New file.
        * gdb.base/skipcxx.cc: New file.

2020-09-16  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26617
        * gdb.dlang/watch-loc.c: Only add .debug_aranges if
        WITH_DEBUG_SECTIONS is defined.
        (xstr, str): New macro.
        (.debug_aranges): Use DMAIN_START_0/1/2 and DMAIN_LENGTH
        to get start and size of _Dmain.
        * gdb.dlang/watch-loc.exp: Pass DMAIN_START_0/1/2 and DMAIN_LENGTH
        using additional_flags.

2020-09-16  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/bp-cmds-sourced-script.c: New file.
        * gdb.base/bp-cmds-sourced-script.exp: New test.
        * gdb.base/bp-cmds-sourced-script.gdb: New file.

2020-09-16  Tom de Vries  <tdevries@suse.de>

        * lib/gdbserver-support.exp (gdbserver_exit): Make sure we
        get the gdb prompt after issuing "monitor exit".

2020-09-16  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26624
        * lib/gdb.exp (gdb_assert): Catch errors in condition evaluation.

2020-09-16  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26618
        * gdb.tui/new-layout.exp: Escape unbalanced braces.

2020-09-15  Tom Tromey  <tromey@adacore.com>

        PR rust/26197:
        * lib/rust-support.exp (rust_llvm_version): New proc.
        * gdb.rust/simple.exp: Check rust_llvm_version.

2020-09-14  Tom de Vries  <tdevries@suse.de>

        * gdb.rust/traits.exp: Fix PATH warning.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.base/catch-follow-exec.c (main): Add explicit return
        statement.
        * gdb.base/catch-signal.c (main): Likewise.
        * gdb.base/condbreak-call-false.c (main): Likewise.
        * gdb.base/consecutive.c (main): Add explicit return
        statement and return type.
        * gdb.base/cursal.c (main): Add explicit return statement.
        * gdb.base/cvexpr.c (main): Likewise.
        * gdb.base/display.c (main): Add explicit return statement and
        return type.
        * gdb.base/dprintf-detach.c (main): Add explicit return statement.
        * gdb.base/endianity.c (main): Likewise.
        * gdb.base/execd-prog.c (main): Likewise.
        * gdb.base/gdb1090.c (main): Likewise.
        * gdb.base/info_qt.c (main): Likewise.
        * gdb.base/lineinc.c (main): Likewise.
        * gdb.base/load-command.c (main): Likewise.
        * gdb.base/macscp1.c (main): Likewise.
        * gdb.base/pr10179-a.c (main): Likewise.
        * gdb.base/quit-live.c (main): Likewise.
        * gdb.base/scope0.c (main): Likewise.
        * gdb.base/settings.c (main): Likewise.
        * gdb.base/stack-checking.c (main): Return int.
        * gdb.base/varargs.c (main): Add explicit return statement.
        * gdb.cp/ambiguous.cc (main): Likewise.
        * gdb.cp/anon-struct.cc (main): Likewise.
        * gdb.cp/anon-union.cc (main): Likewise.
        * gdb.cp/bool.cc (main): Likewise.
        * gdb.cp/bs15503.cc (main): Likewise.
        * gdb.cp/cplusfuncs.cc (main): Likewise.
        * gdb.cp/cttiadd.cc (main): Likewise.
        * gdb.cp/extern-c.cc (main): Likewise.
        * gdb.cp/filename.cc (main): Likewise.
        * gdb.cp/formatted-ref.cc (main): Likewise.
        * gdb.cp/mb-ctor.cc (main): Likewise.
        * gdb.cp/member-ptr.cc (main): Likewise.
        * gdb.cp/minsym-fallback-main.cc (main): Likewise.
        * gdb.cp/overload-const.cc (main): Likewise.
        * gdb.cp/paren-type.cc (main): Likewise.
        * gdb.cp/parse-lang.cc (main): Likewise.
        * gdb.cp/pr-1023.cc (main): Likewise.
        * gdb.cp/psmang1.cc (main): Likewise.
        * gdb.cp/readnow-language.cc (main): Likewise.
        * gdb.cp/ref-params.cc (main): Likewise.
        * gdb.cp/rvalue-ref-params.cc (main): Likewise.
        * gdb.cp/virtbase2.cc (main): Likewise.
        * gdb.dwarf2/dw2-abs-hi-pc.c (main): Likewise.
        * gdb.dwarf2/dw2-namespaceless-anonymous.c (main): Likewise.
        * gdb.dwarf2/dw4-toplevel-types.cc (main): Likewise.
        * gdb.mi/mi-console.c (main): Likewise.
        * gdb.mi/mi-read-memory.c (main): Likewise.
        * gdb.modula2/multidim.c (main): Likewise.
        * gdb.opt/inline-small-func.c (main): Likewise.
        * gdb.python/py-rbreak.c (main): Likewise.
        * gdb.stabs/exclfwd1.c (main): Likewise.
        * gdb.trace/qtro.c (main): Likewise.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.base/share-env-with-gdbserver.c (main): Call my_getenv
        instead of getenv.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.base/dbx.exp (dbx_gdb_start): Adjust to use gdb_spawn
        instead of spawning GDB with remote_spawn.
        * lib/mi-support.exp (default_mi_gdb_start): Adjust to use
        gdb_spawn instead of spawning GDB with remote_spawn.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.dwarf2/ada-linkage-name.c (main): Move to the bottom of the
        file and add calls to first and second.
        * gdb.dwarf2/atomic.c (main): Move to the bottom of the file and
        add call to f.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.mi/mi-break-qualified.cc: New file.
        * gdb.mi/mi-break-qualified.exp: New file.
        * lib/mi-support.exp (mi_create_breakpoint_multi)
        (mi_make_breakpoint_loc, mi_make_breakpoint_multi): New
        procedures.
        (mi_create_breakpoint_1): New, factored out from
        mi_create_breakpoint.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.cp/inherit.exp: No longer pass -Wno-deprecated-register.
        * gdb.cp/misc.exp: No longer pass -Wno-deprecated-register.
        * gdb.cp/misc.cc (class small, small::method, marker_reg1)
        (register_class): Delete.
        (main): Don't call register_class.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.cp/classes.exp: No longer pass -Wno-deprecated-register.
        (do_tests): Remove "calling method for small class" test.
        * gdb.cp/classes.cc (class small, small::method, marker_reg1)
        (register_class): Delete.
        (main): Don't call register_class.
        * gdb.cp/call-method-register.exp: New file, based on bits removed
        from classes.exp.
        * gdb.cp/call-method-register.cc: New file, based on bits removed
        from classes.cc.

2020-09-13  Pedro Alves  <pedro@palves.net>

        * gdb.base/msym-bp-2.c: New.
        * gdb.base/msym-bp-shl-lib.c: New file.
        * gdb.base/msym-bp-shl-main-2.c: New file.
        * gdb.base/msym-bp-shl-main.c: New file.
        * gdb.base/msym-bp-shl.exp: New file.
        * gdb.base/msym-bp.c: New file.
        * gdb.base/msym-bp.exp: New file.

2020-09-13  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/default.exp: Change $_gdb_major to 11.

2020-09-11  Moritz Riesterer  <moritz.riesterer@intel.com>
            Felix Willgerodt  <Felix.Willgerodt@intel.com>

        * x86-avx512bf16.c: New file.
        * x86-avx512bf16.exp: Likewise.
        * lib/gdb.exp (skip_avx512bf16_tests): New function.

2020-09-11  Tom de Vries  <tdevries@suse.de>

        PR exp/26602
        * gdb.cp/ambiguous.exp: Add KFAILs for PR26602.

2020-09-11  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/bp-cmds-execution-x-script.exp: Remove a stale comment.

2020-09-10  Alan Modra  <amodra@gmail.com>

        PR 26597
        * gdb.dlang/demangle.exp: Update tests as per gcc commit 387d0773f3.

2020-09-08  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/frame-inlined-in-outer-frame.exp: Consume gdb prompt
        after gdb_starti_cmd.

2020-09-03  Alok Kumar Sharma  <AlokKumar.Sharma@amd.com>

        * lib/fortran.exp (fortran_complex8): New proc.
        (fortran_complex16): New proc.
        * gdb.fortran/complex.exp: Use routines from fortran.exp
        * gdb.fortran/pointer-to-pointer.exp: Likewise.
        * gdb.fortran/vla-ptr-info.exp: Likewise.

2020-09-03  Tom de Vries  <tdevries@suse.de>

        PR breakpoint/26546
        * gdb.base/label-without-address.exp: Runto main first.

2020-09-02  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mi_var_access.exp: Test children of access variable.
        * gdb.ada/mi_var_access/mi_access.adb: Add new stop markers.
        * gdb.ada/mi_var_array.exp: Update.

2020-08-31  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/corefile.exp (warning-free): XFAIL test when running
        on docker w/ AUFS storage driver.

2020-08-31  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/corefile2.exp (renamed binfile): New tests.

2020-08-31  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.dwarf2/dw2-reg-undefined.exp: Remove spurious #.

2020-08-31  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.dwarf2/frame-inlined-in-outer-frame.exp: New file.
        * gdb.dwarf2/frame-inlined-in-outer-frame.S: New file.

2020-08-31  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.dwarf2/dw2-reg-undefined.exp: Test "set debug frame 1"
        output, printing a "not saved" value from history and printing a
        convenience variable created from a "not saved" value.

2020-08-31  Tom de Vries  <tdevries@suse.de>

        * gdb.base/eh_return.exp: Use nopie.

2020-08-28  Pedro Alves  <pedro@palves.net>

        * gdb.base/advance-until-multiple-locations.exp
        (advance_overload, until_overload): Adjust to match the
        frame/function header instead of the source line text.

2020-08-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/label-without-address.c: New test.
        * gdb.base/label-without-address.exp: New file.

2020-08-27  Pedro Alves  <pedro@palves.net>

        PR gdb/26523
        PR gdb/26524
        * gdb.base/advance-until-multiple-locations.cc: New.
        * gdb.base/advance-until-multiple-locations.exp: New.

2020-08-27  Simon Marchi  <simon.marchi@polymtl.ca>

        *  gdb.dwarf2/dw2-reg-undefined.exp: Use multi_line.

2020-08-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-byte.exp: Make test names unique, use
        gdb_breakpoint, and fix typo 'forth' -> 'fourth'.
        * gdb.arch/amd64-dword.exp: Likewise.
        * gdb.arch/amd64-pseudo.c: Fix typo 'forth' -> 'fourth'.
        * gdb.arch/amd64-stap-special-operands.exp: Make test names
        unique.
        * gdb.arch/amd64-tailcall-ret.exp: Likewise.
        * gdb.arch/amd64-word.exp: Make test names unique, use
        gdb_breakpoint, and fix typo 'forth' -> 'fourth'.
        * gdb.arch/i386-byte.exp: Make test names unique, use
        gdb_breakpoint.
        * gdb.arch/i386-word.exp: Likewise.

2020-08-25  Shahab Vahedi  <shahab@synopsys.com>

        * gdb.arch/arc-tdesc-cpu.xml: Use new feature names.

2020-08-25  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/26532
        * gdb.threads/stepi-random-signal.exp: Update pattern.

2020-08-25  Simon Marchi  <simon.marchi@efficios.com>

        PR gdb/26532
        * gdb.base/ui-redirect.exp: Update pattern.

2020-08-25  Gary Benson <gbenson@redhat.com>

        * gdb.dwarf2/dw2-dir-file-name.exp: Use system assembler
        when compiling with clang.
        * gdb.dwarf2/dw2-restore.exp: Likewise.

2020-08-25  Gary Benson <gbenson@redhat.com>

        * gdb.cp/ambiguous.exp: Enable test when compiling with GCC.
        Add additional_flags=-Wno-inaccessible-base when compiling
        with GCC >= 10.1 or clang.  Add additional_flags=-w when
        compiling with GCC < 10.

2020-08-25  Gaius Mulley  <gaiusmod2@gmail.com>

        PR m2/26372
        * gdb.modula2/multidim.c: New file.
        * gdb.modula2/multidim.exp: New file.

2020-08-24  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/gdb.exp (runto): Always emit fail on internal error.

2020-08-24  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/gdb-sigterm.exp (do_test): Update expected regexp.
        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
        Likewise.
        * gdb.threads/stepi-random-signal.exp: Likewise.

2020-08-20  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/print-file-var.exp: Fix typo "breapoint".
        * gdb.trace/strace.exp: Ditto.

2020-08-19  Alok Kumar Sharma  <AlokKumar.Sharma@amd.com>

        * gdb.fortran/vla-type.exp: Skip commands not required for
        the Flang compiled binaries after prologue fix.

2020-08-17  Tom de Vries  <tdevries@suse.de>
            Tom Tromey  <tromey@adacore.com>

        PR rust/26197:
        * gdb.rust/simple.exp (xfail_pattern): Update for new failure.

2020-08-17  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mi_var_access.exp: New file.
        * gdb.ada/mi_var_access/mi_access.adb: New file.
        * gdb.ada/mi_var_access/pck.adb: New file.
        * gdb.ada/mi_var_access/pck.ads: New file.

2020-08-16  Tom de Vries  <tdevries@suse.de>

        PR gdb/25350
        * gdb.base/eh_return.c: New test.
        * gdb.base/eh_return.exp: New file.

2020-08-15  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/mixed-lang-stack.c (fortran_charlen_t): New type.
        (mixed_func_1d_): Use fortran_charlen_t in decl.

2020-08-15  Tom de Vries  <tdevries@suse.de>

        PR backtrace/26390
        * gdb.fortran/mixed-lang-stack.exp: Call bt with -frame-arguments all.
        Update expected pattern.

2020-08-13  Pedro Alves  <pedro@palves.net>

        * gdb.fortran/complex.exp: Check skip_fortran_tests.
        * gdb.fortran/library-module.exp: Likewise.
        * gdb.fortran/logical.exp: Likewise.
        * gdb.fortran/module.exp: Likewise.
        * gdb.fortran/print_type.exp: Likewise.
        * gdb.fortran/vla-alloc-assoc.exp: Likewise.
        * gdb.fortran/vla-datatypes.exp: Likewise.
        * gdb.fortran/vla-history.exp: Likewise.
        * gdb.fortran/vla-ptr-info.exp: Likewise.
        * gdb.fortran/vla-ptype-sub.exp: Likewise.
        * gdb.fortran/vla-ptype.exp: Likewise.
        * gdb.fortran/vla-sizeof.exp: Likewise.
        * gdb.fortran/vla-type.exp: Likewise.
        * gdb.fortran/vla-value-sub-arbitrary.exp: Likewise.
        * gdb.fortran/vla-value-sub-finish.exp: Likewise.
        * gdb.fortran/vla-value-sub.exp: Likewise.
        * gdb.fortran/vla-value.exp: Likewise.

2020-08-13  Pedro Alves  <pedro@palves.net>

        * gdb.ada/access_tagged_param.exp: Check skip_ada_tests.
        * gdb.ada/access_to_packed_array.exp: Likewise.
        * gdb.ada/access_to_unbounded_array.exp: Likewise.
        * gdb.ada/addr_arith.exp: Likewise.
        * gdb.ada/arr_acc_idx_w_gap.exp: Likewise.
        * gdb.ada/arr_arr.exp: Likewise.
        * gdb.ada/arr_enum_idx_w_gap.exp: Likewise.
        * gdb.ada/array_bounds.exp: Likewise.
        * gdb.ada/array_of_variable_length.exp: Likewise.
        * gdb.ada/array_ptr_renaming.exp: Likewise.
        * gdb.ada/array_subscript_addr.exp: Likewise.
        * gdb.ada/arraydim.exp: Likewise.
        * gdb.ada/arrayparam.exp: Likewise.
        * gdb.ada/arrayptr.exp: Likewise.
        * gdb.ada/assign_1.exp: Likewise.
        * gdb.ada/assign_arr.exp: Likewise.
        * gdb.ada/atomic_enum.exp: Likewise.
        * gdb.ada/attr_ref_and_charlit.exp: Likewise.
        * gdb.ada/bad-task-bp-keyword.exp: Likewise.
        * gdb.ada/bias.exp: Likewise.
        * gdb.ada/boolean_expr.exp: Likewise.
        * gdb.ada/bp_c_mixed_case.exp: Likewise.
        * gdb.ada/bp_enum_homonym.exp: Likewise.
        * gdb.ada/bp_inlined_func.exp: Likewise.
        * gdb.ada/bp_on_var.exp: Likewise.
        * gdb.ada/bp_range_type.exp: Likewise.
        * gdb.ada/bp_reset.exp: Likewise.
        * gdb.ada/call_pn.exp: Likewise.
        * gdb.ada/catch_assert_if.exp: Likewise.
        * gdb.ada/catch_ex.exp: Likewise.
        * gdb.ada/catch_ex_std.exp: Likewise.
        * gdb.ada/char_enum.exp: Likewise.
        * gdb.ada/char_param.exp: Likewise.
        * gdb.ada/complete.exp: Likewise.
        * gdb.ada/cond_lang.exp: Likewise.
        * gdb.ada/convvar_comp.exp: Likewise.
        * gdb.ada/dgopt.exp: Likewise.
        * gdb.ada/disc_arr_bound.exp: Likewise.
        * gdb.ada/display_nested.exp: Likewise.
        * gdb.ada/dot_all.exp: Likewise.
        * gdb.ada/dyn_loc.exp: Likewise.
        * gdb.ada/dyn_stride.exp: Likewise.
        * gdb.ada/excep_handle.exp: Likewise.
        * gdb.ada/expr_delims.exp: Likewise.
        * gdb.ada/expr_with_funcall.exp: Likewise.
        * gdb.ada/exprs.exp: Likewise.
        * gdb.ada/fin_fun_out.exp: Likewise.
        * gdb.ada/fixed_cmp.exp: Likewise.
        * gdb.ada/formatted_ref.exp: Likewise.
        * gdb.ada/frame_arg_lang.exp: Likewise.
        * gdb.ada/frame_args.exp: Likewise.
        * gdb.ada/fullname_bp.exp: Likewise.
        * gdb.ada/fun_addr.exp: Likewise.
        * gdb.ada/fun_in_declare.exp: Likewise.
        * gdb.ada/fun_overload_menu.exp: Likewise.
        * gdb.ada/fun_renaming.exp: Likewise.
        * gdb.ada/funcall_char.exp: Likewise.
        * gdb.ada/funcall_param.exp: Likewise.
        * gdb.ada/funcall_ptr.exp: Likewise.
        * gdb.ada/funcall_ref.exp: Likewise.
        * gdb.ada/homonym.exp: Likewise.
        * gdb.ada/info_addr_mixed_case.exp: Likewise.
        * gdb.ada/info_auto_lang.exp: Likewise.
        * gdb.ada/info_exc.exp: Likewise.
        * gdb.ada/info_types.exp: Likewise.
        * gdb.ada/int_deref.exp: Likewise.
        * gdb.ada/interface.exp: Likewise.
        * gdb.ada/iwide.exp: Likewise.
        * gdb.ada/lang_switch.exp: Likewise.
        * gdb.ada/length_cond.exp: Likewise.
        * gdb.ada/maint_with_ada.exp: Likewise.
        * gdb.ada/mi_catch_assert.exp: Likewise.
        * gdb.ada/mi_catch_ex.exp: Likewise.
        * gdb.ada/mi_catch_ex_hand.exp: Likewise.
        * gdb.ada/mi_dyn_arr.exp: Likewise.
        * gdb.ada/mi_ex_cond.exp: Likewise.
        * gdb.ada/mi_exc_info.exp: Likewise.
        * gdb.ada/mi_interface.exp: Likewise.
        * gdb.ada/mi_prot.exp: Likewise.
        * gdb.ada/mi_ref_changeable.exp: Likewise.
        * gdb.ada/mi_string_access.exp: Likewise.
        * gdb.ada/mi_task_arg.exp: Likewise.
        * gdb.ada/mi_task_info.exp: Likewise.
        * gdb.ada/mi_var_array.exp: Likewise.
        * gdb.ada/mi_var_union.exp: Likewise.
        * gdb.ada/mi_variant.exp: Likewise.
        * gdb.ada/minsyms.exp: Likewise.
        * gdb.ada/mod_from_name.exp: Likewise.
        * gdb.ada/nested.exp: Likewise.
        * gdb.ada/null_array.exp: Likewise.
        * gdb.ada/optim_drec.exp: Likewise.
        * gdb.ada/out_of_line_in_inlined.exp: Likewise.
        * gdb.ada/packed_array_assign.exp: Likewise.
        * gdb.ada/packed_tagged.exp: Likewise.
        * gdb.ada/pp-rec-component.exp: Likewise.
        * gdb.ada/print_chars.exp: Likewise.
        * gdb.ada/print_pc.exp: Likewise.
        * gdb.ada/ptr_typedef.exp: Likewise.
        * gdb.ada/ptype_arith_binop.exp: Likewise.
        * gdb.ada/ptype_array.exp: Likewise.
        * gdb.ada/ptype_field.exp: Likewise.
        * gdb.ada/ptype_tagged_param.exp: Likewise.
        * gdb.ada/ptype_union.exp: Likewise.
        * gdb.ada/py_range.exp: Likewise.
        * gdb.ada/py_taft.exp: Likewise.
        * gdb.ada/rdv_wait.exp: Likewise.
        * gdb.ada/rec_comp.exp: Likewise.
        * gdb.ada/rec_return.exp: Likewise.
        * gdb.ada/ref_param.exp: Likewise.
        * gdb.ada/ref_tick_size.exp: Likewise.
        * gdb.ada/rename_subscript_param.exp: Likewise.
        * gdb.ada/repeat_dyn.exp: Likewise.
        * gdb.ada/same_component_name.exp: Likewise.
        * gdb.ada/same_enum.exp: Likewise.
        * gdb.ada/scalar_storage.exp: Likewise.
        * gdb.ada/set_wstr.exp: Likewise.
        * gdb.ada/small_reg_param.exp: Likewise.
        * gdb.ada/str_binop_equal.exp: Likewise.
        * gdb.ada/str_ref_cmp.exp: Likewise.
        * gdb.ada/str_uninit.exp: Likewise.
        * gdb.ada/sub_variant.exp: Likewise.
        * gdb.ada/sym_print_name.exp: Likewise.
        * gdb.ada/taft_type.exp: Likewise.
        * gdb.ada/tagged.exp: Likewise.
        * gdb.ada/tagged_access.exp: Likewise.
        * gdb.ada/task_bp.exp: Likewise.
        * gdb.ada/task_switch_in_core.exp: Likewise.
        * gdb.ada/tasks.exp: Likewise.
        * gdb.ada/tick_last_segv.exp: Likewise.
        * gdb.ada/tick_length_array_enum_idx.exp: Likewise.
        * gdb.ada/type_coercion.exp: Likewise.
        * gdb.ada/unc_arr_ptr_in_var_rec.exp: Likewise.
        * gdb.ada/unchecked_union.exp: Likewise.
        * gdb.ada/uninitialized_vars.exp: Likewise.
        * gdb.ada/var_arr_attrs.exp: Likewise.
        * gdb.ada/var_arr_typedef.exp: Likewise.
        * gdb.ada/var_rec_arr.exp: Likewise.
        * gdb.ada/variant-record.exp: Likewise.
        * gdb.ada/variant.exp: Likewise.
        * gdb.ada/variant_record_packed_array.exp: Likewise.
        * gdb.ada/varsize_limit.exp: Likewise.
        * gdb.ada/whatis_array_val.exp: Likewise.
        * gdb.ada/widewide.exp: Likewise.
        * gdb.ada/win_fu_syms.exp: Likewise.

2020-08-12  Gary Benson  <gbenson@redhat.com>

        * gdb.dwarf2/dw2-op-out-param.S (.Ltext5): Fix duplicate label.

2020-08-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/check-test-names.exp (do_reset_vars): Use 'array unset' to
        unset the array variable.

2020-08-03  Tom de Vries  <tdevries@suse.de>

        PR symtab/26333
        * lib/dwarf.exp (DW_LNE_user): New proc.
        * gdb.dwarf2/dw2-vendor-extended-opcode.c: New test.
        * gdb.dwarf2/dw2-vendor-extended-opcode.exp: New file.

2020-07-31  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/coremaker2.c: Change all uses of 'unsigned long long'
        to 'uintptr_t'
        (inttypes.h): Include.

2020-07-31  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/coremaker2.c (buf_rw): Increase size to 256 KiB.
        (C5_24k): Delete.
        (C5_8k, C5_64k, C5_256k): New macros.
        (buf_ro): Allocate 256 KiB of initialized data.

2020-07-30  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/condbreak-bad.exp: Extend the test with scenarios
        that attempt to overwrite an existing condition with a condition
        that fails parsing and also with a condition that parses fine
        but contains junk at the end.

2020-07-30  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/condbreak-bad.c: New test.
        * gdb.base/condbreak-bad.exp: New file.

2020-07-30  Tom de Vries  <tdevries@suse.de>

        * lib/sym-info-cmds.exp (GDBInfoModuleSymbols::check_entry_1): Factor
        out of ...
        (GDBInfoModuleSymbols::check_entry): ... here.
        (GDBInfoModuleSymbols::check_optional_entry): New proc.
        * gdb.fortran/info-modules.exp: Use check_optional_entry for entries
        related to __def_init_mod1_M1t1 / __vtype_mod1_M1t1 / __copy_mod1_M1t1.

2020-07-30  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/ptype-on-functions.exp: Make "_t" suffix on
        "__class_some_module_Number_t" optional.

2020-07-29  Tom de Vries  <tdevries@suse.de>

        * lib/selftest-support.exp (selftest_setup): Allow breakpoint at
        multiple locations.

2020-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-line-number-zero.exp: Set breakpoints on lines
        rather than function name.

2020-07-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR symtab/26270:
        * gdb.cp/disasm-func-name.cc: New file.
        * gdb.cp/disasm-func-name.exp: New file.

2020-07-28  Tom Tromey  <tromey@adacore.com>

        * gdb.dwarf2/varval.exp (setup_exec): Add 'or' instruction to
        'varval' location.

2020-07-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-unwind.py: Update to make use of a register
        descriptor.

2020-07-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-arch-reg-names.exp: Add additional tests.

2020-07-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR fortran/23051
        PR fortran/26139
        * gdb.fortran/class-allocatable-array.exp: New file.
        * gdb.fortran/class-allocatable-array.f90: New file.
        * gdb.fortran/pointer-to-pointer.exp: New file.
        * gdb.fortran/pointer-to-pointer.f90: New file.

2020-07-25  Tom de Vries  <tdevries@suse.de>

        PR symtab/26243
        * gdb.dwarf2/dw2-line-number-zero.c: New test.
        * gdb.dwarf2/dw2-line-number-zero.exp: New file.

2020-07-24  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26293
        * gdb.ada/mi_prot.exp: Require gnatmake-8.

2020-07-23  Pedro Alves  <pedro@palves.net>

        * gdb.server/server-kill.exp (prepare): New, factored out from the
        top level.
        (kill_server): New.
        (test_tstatus, test_unwind_nosyms, test_unwind_syms): New.
        (top level) : Call test_tstatus, test_unwind_nosyms, test_unwind_syms.

2020-07-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-disasm-over-non-stmt.exp: New file.

2020-07-22  Sandra Loosemore  <sandra@codesourcery.com>

        * lib/gdb.exp (gdb_wrapper_file, gdb_wrapper_flags):
        Initialize to empty string at top level.
        (gdb_wrapper_init): Revert check for file existence on build.
        Build the wrapper in its default place, not a build-specific
        location.  When host == build, make the pathname absolute.
        (gdb_compile): Delete leftover declaration of
        gdb_wrapper_initialized.  Check gdb_wrapper_file being an empty
        string instead of uninitialized.

2020-07-22  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/corefile2.exp: New file.
        * gdb.base/coremaker2.exp: New file.

2020-07-22  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/coredump-filter.exp: Add second
        non-Private-Shared-Anon-File test.
        (test_disasm): Rename binfile for test which is expected
        to fail.

2020-07-22  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/corefile.exp: Add test "accessing read-only mmapped
        data in core file".
        * gdb.base/coremaker.c (buf2ro): New global.
        (mmapdata): Add a read-only mmap mapping.

2020-07-22  Kevin Buettner  <kevinb@redhat.com>

        PR corefiles/25631
        * gdb.base/corefile.exp (accessing anonymous, unwritten-to mmap data):
        New test.
        * gdb.base/coremaker.c (buf3): New global.
        (mmapdata): Add mmap call which uses MAP_ANONYMOUS and MAP_PRIVATE
        flags.

2020-07-22  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/coremaker.c (filler_ro): New global constant.

2020-07-22  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mi_prot.exp: New file.
        * gdb.ada/mi_prot/pkg.adb: New file.
        * gdb.ada/mi_prot/pkg.ads: New file.
        * gdb.ada/mi_prot/prot.adb: New file.

2020-07-22  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/jit-reader-simple.exp: Add a scenario for a binary that
        loads two JITers.

2020-07-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-arch-reg-groups.exp: Additional tests.

2020-07-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-arch-reg-names.exp: Additional tests.

2020-07-21  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/solib-precsave.exp: Handle additional "recommended
        breakpoint locations".
        * gdb.reverse/solib-reverse.exp: Same.

2020-07-21  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/step-reverse.c (callee): Merge statements.

2020-07-21  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/info-modules.exp (info module variables): Allow missing
        line numbers for some variables.

2020-07-21  Tom de Vries  <tdevries@suse.de>

        * gdb.opt/inline-locals.c (init_array): New func.
        (func1): Use init_array.
        * gdb.opt/inline-locals.exp: Update pattern.

2020-07-21  Tom de Vries  <tdevries@suse.de>

        * gdb.debuginfod/fetch_src_and_symbols.exp: Use save_vars for env
        vars.  Fix PATH and DUPLICATE errors.  Cleanup whitespace.

2020-07-20  Ludovic Courtès  <ludo@gnu.org>

        * gdb.guile/source2.scm: Add #f first argument to 'format'.
        * gdb.guile/types-module.exp: Remove "ERROR:" from
        regexps since Guile 3.0 no longer prints that.

2020-07-20  Ludovic Courtès  <ludo@gnu.org>

        * gdb.guile/scm-error.exp ("source $remote_guile_file_1"): Relax
        error regexp to match on Guile 2.2.

2020-07-20  Gary Benson <gbenson@redhat.com>

        * gdb.cp/align.exp: Fix "alignof (void)" tests when compiling
        with clang.

2020-07-20  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/omp-par-scope.c (lock, lock2): New variable.
        (omp_set_lock_in_order): New function.
        (single_scope, multi_scope, nested_func, nested_parallel): Use
        omp_set_lock_in_order and omp_unset_lock.
        (main): Init and destroy lock and lock2.

2020-07-20  Tom de Vries  <tdevries@suse.de>

        * gdb.base/valgrind-infcall-2.exp: Handle printf unknown return type.

2020-07-20  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/attach-slow-waitpid.exp: Bail out if gdb_start fails.

2020-07-17  Tom de Vries  <tdevries@suse.de>

        * gdb.base/valgrind-infcall-2.c: New test.
        * gdb.base/valgrind-infcall-2.exp: New file.
        * lib/valgrind.exp (vgdb_start): Add and handle active_at_startup.

2020-07-17  Tom de Vries  <tdevries@suse.de>

        * gdb.dlang/circular.c (found): Use found_label as label name.
        * gdb.dwarf2/arr-subrange.c (main): Use main_label as label name.
        * gdb.dwarf2/comp-unit-lang.c (func): Use func_label as label name.
        * gdb.dlang/circular.exp: Use MACRO_AT_func and MACRO_AT_range.
        * gdb.dwarf2/ada-linkage-name.exp: Same.
        * gdb.dwarf2/arr-subrange.exp: Same.
        * gdb.dwarf2/atomic-type.exp: Same.
        * gdb.dwarf2/comp-unit-lang.exp: Same.
        * gdb.dwarf2/cpp-linkage-name.exp: Same.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Same.
        * gdb.dwarf2/dw2-lexical-block-bare.exp: Same.
        * gdb.dwarf2/dw2-regno-invalid.exp: Same.
        * gdb.dwarf2/implptr-64bit.exp: Same.
        * gdb.dwarf2/imported-unit-abstract-const-value.exp: Same.
        * gdb.dwarf2/imported-unit-runto-main.exp: Same.
        * gdb.dwarf2/imported-unit.exp: Same.
        * gdb.dwarf2/main-subprogram.exp: Same.
        * gdb.dwarf2/missing-type-name.exp: Same.
        * gdb.dwarf2/nonvar-access.exp: Same.
        * gdb.dwarf2/struct-with-sig.exp: Same.
        * gdb.dwarf2/typedef-void-finish.exp: Same.
        * gdb.dwarf2/void-type.exp: Same.

2020-07-17  Tom de Vries  <tdevries@suse.de>

        * lib/dwarf.exp (Dwarf::MACRO_AT_func, Dwarf::MACRO_AT_range): Drop
        src parameter.
        * gdb.dlang/watch-loc.exp: Update MACRO_AT_{func,range} calls.
        * gdb.dwarf2/bitfield-parent-optimized-out.exp: Same.
        * gdb.dwarf2/dw2-ifort-parameter.exp: Same.
        * gdb.dwarf2/dw2-opt-structptr.exp: Same.
        * gdb.dwarf2/dwz.exp: Same.
        * gdb.dwarf2/implptr-optimized-out.exp: Same.
        * gdb.dwarf2/implref-array.exp: Same.
        * gdb.dwarf2/implref-const.exp: Same.
        * gdb.dwarf2/implref-global.exp: Same.
        * gdb.dwarf2/implref-struct.exp: Same.
        * gdb.dwarf2/info-locals-optimized-out.exp: Same.
        * gdb.dwarf2/opaque-type-lookup.exp: Same.
        * gdb.dwarf2/var-access.exp: Same.
        * gdb.dwarf2/varval.exp: Same.
        * gdb.trace/entry-values.exp: Same.

2020-07-17  Tom de Vries  <tdevries@suse.de>

        * lib/dwarf.exp (Dwarf::extern): Remove.
        * gdb.compile/compile-ops.exp: Remove use of Dwarf::extern.
        * gdb.dlang/circular.exp: Same.
        * gdb.dwarf2/comp-unit-lang.exp: Same.
        * gdb.dwarf2/dw2-ifort-parameter.exp: Same.
        * gdb.dwarf2/dw2-symtab-includes.exp: Same.
        * gdb.dwarf2/dwz.exp: Same.
        * gdb.dwarf2/imported-unit-abstract-const-value.exp: Same.
        * gdb.dwarf2/imported-unit-runto-main.exp: Same.
        * gdb.dwarf2/imported-unit.exp: Same.
        * gdb.dwarf2/opaque-type-lookup.exp: Same.

2020-07-16  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/shell.exp: Skip pipe tests dependent on sh on Windows host.
        Use double quotes instead of single quotes.

2020-07-16  Caroline Tice  <cmtice@google.com>

        * gdb.dwarf2/dw5-rnglist-test.cc: New file.
        * gdb.dwarf2/dw5-rnglist-test.exp: New file.

2020-07-16  Tom de Vries  <tdevries@suse.de>

        * lib/dwarf.exp (program): Initialize _line.
        (DW_LNE_end_sequence): Reinitialize _line.
        (DW_LNS_advance_line): Update _line.
        (line): New proc.
        * gdb.dwarf2/dw2-inline-many-frames.exp: Use line.
        * gdb.dwarf2/dw2-inline-small-func.exp: Same.
        * gdb.dwarf2/dw2-inline-stepping.exp: Same.
        * gdb.dwarf2/dw2-is-stmt-2.exp: Same.
        * gdb.dwarf2/dw2-is-stmt.exp: Same.
        * gdb.dwarf2/dw2-ranges-func.exp: Same.

2020-07-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/ptype-on-functions.exp: Make the result pattern more
        generic.

2020-07-15  Tom de Vries  <tdevries@suse.de>

        * gdb.trace/entry-values.exp: Expect "call" instead of "callq" if
        is_amd64_regs_target.

2020-07-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/ptype-on-functions.exp: Add more tests.
        * gdb.fortran/ptype-on-functions.f90: Likewise.

2020-07-14  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/dwarf.exp (Dwarf::cu, Dwarf::tu, Dwarf::lines): Change valid
        values in documentation for addr_size to 4 and 8.

2020-07-14  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-osabi.exp: Update.
        * gdb.arch/arm-disassembler-options.exp: Update.
        * gdb.arch/powerpc-disassembler-options.exp: Update.
        * gdb.arch/ppc64-symtab-cordic.exp: Update.
        * gdb.arch/s390-disassembler-options.exp: Update.
        * gdb.base/all-architectures.exp.tcl: Update.
        * gdb.base/attach-pie-noexec.exp: Update.
        * gdb.base/catch-syscall.exp: Update.
        * gdb.xml/tdesc-arch.exp: Update.

2020-07-14  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/clone-new-thread-event.c (gettid): Rename to ...
        (local_gettid): ... this.
        (fn): Update.

2020-07-13  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/info_sources.exp: Skip directory match tests on
        remote hosts.

2020-07-13  Gary Benson <gbenson@redhat.com>

        * gdb.base/savedregs.exp (caller): Use parentheses to
        make expected expression evaluation ordering explicit.

2020-07-13  Gary Benson <gbenson@redhat.com>

        * gdb.arch/i386-sse.c (have_sse) <edx>: Make unsigned.

2020-07-13  Gary Benson <gbenson@redhat.com>

        * gdb.base/bigcore.c (main): Use a volatile pointer when
        attempting to trigger a SIGSEGV.
        * gdb.base/gcore-relro-pie.c (break_here): Likewise.
        * gdb.base/gcore-tls-pie.c (break_here): Likewise.
        * gdb.base/savedregs.c (thrower): Likewise.
        * gdb.mi/mi-syn-frame.c (bar): Likewise.

2020-07-13  Gary Benson <gbenson@redhat.com>

        * gdb.base/vla-datatypes.c (vla_factory): Factor out sections
        defining and using VLA structure fields into...
        * gdb.base/vla-struct-fields.c: New file.
        * gdb.base/vla-datatypes.exp: Factor out VLA structure field
        tests into...
        * gdb.base/vla-struct-fields.exp: New file.

2020-07-13  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (have_fuse_ld_gold): New caching proc.
        * gdb.base/gcore-tls-pie.exp: Use have_fuse_ld_gold.
        * gdb.base/gold-gdb-index.exp: Same.
        * gdb.base/morestack.exp: Same.

2020-07-11  Daniel Xu  <dxu@dxuuu.xyz>

        PR rust/26121
        * gdb.rust/modules.rs: Prevent linker from discarding test
        symbol.

2020-07-10  Pedro Alves  <pedro@palves.net>

        PR gdb/26199
        * gdb.multi/multi-target.c (exit_thread): New.
        (thread_start): Break loop if EXIT_THREAD.
        * gdb.multi/multi-target.exp (test_no_unwaited_for): New proc.
        (top level) Call test_no_resumed.

2020-07-08  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/catch_ex/foo.adb: Pass string to raise.
        * gdb.ada/catch_ex.exp: Examine catchpoint text.

2020-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR python/22748
        * gdb.opt/inline-frame-tailcall.c: New file.
        * gdb.opt/inline-frame-tailcall.exp: New file.
        * gdb.python/py-unwind-inline.c: New file.
        * gdb.python/py-unwind-inline.exp: New file.
        * gdb.python/py-unwind-inline.py: New file.

2020-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-arch-reg-groups.exp: New file.

2020-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-arch-reg-names.exp: New file.

2020-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-unwind.py (TestUnwinder::__call__): Add test for
        gdb.PendingFrame.architecture method.

2020-07-06  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-ranges-base.exp: Test line-table order.

2020-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/structs2.c (main): Adjust second parem_reg call to
        explicitly write negative numbers.
        * gdb.base/structs2.exp: Adjust expected output.

2020-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/charset.c (init_string): Change all char parameters to
        unsigned char parameters.

2020-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-sc.exp (start_scalars_test): Use
        prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
        * gdb.base/overlays.c: Remove references to PARAMS.
        * gdb.base/ovlymgr.h (PARAMS): Delete, and remove all references.
        * gdb.base/reread.exp: Don't set 'prototypes' global.
        * gdb.base/structs.exp (start_structs_test): Use
        prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
        * gdb.base/structs2.exp: Don't set 'prototypes' global.  Use
        prepare_for_testing and don't try compiling with -DNO_PROTOTYPES.
        Don't issue "set width 0".  Remove gdb_stop_suppressing_tests
        call.
        * gdb.base/varargs.exp: Don't set 'prototypes' global.

2020-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/m32rovly.c: Delete.
        * gdb.base/ovlymgr.c: Remove all code guarded by __D10V__.

2020-06-30  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.python/py-breakpoint.exp: use gdb_test_multiline instead
        of gdb_py_test_multiple.
        * gdb.python/py-cmd.exp: Likewise.
        * gdb.python/py-events.exp: Likewise.
        * gdb.python/py-function.exp: Likewise.
        * gdb.python/py-inferior.exp: Likewise.
        * gdb.python/py-infthread.exp: Likewise.
        * gdb.python/py-linetable.exp: Likewise.
        * gdb.python/py-parameter.exp: Likewise.
        * gdb.python/py-value.exp: Likewise.

2020-06-30  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26175
        * lib/future.exp (gdb_default_target_compile): Detect and handle
        early_flags.

2020-06-29  Simon Marchi  <simon.marchi@efficios.com>

        * boards/simavr.exp (gdb_load): Catch errors when closing
        previous connection.  Close connection, wait for process and
        unset simavr_spawn_id on failure.

2020-06-29  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (unknown): Make test-case unresolved.

2020-06-29  Tom de Vries  <tdevries@suse.de>

        PR gdb/25475
        * gdb.server/solib-list.exp: Verify that the symbol reload
        confirmation question is asked.

2020-06-26  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * lib/gdb.exp (gdb_test_multiline): New, moved from gdb-guile.exp,
        have a input seq nr in each pass message.
        * lib/gdb-guile.exp (gdb_test_multiline): Move to gdb.exp.
        * lib/gdb-python.exp (gdb_py_test_multiple): Remove.
        * gdb.python/python.exp: Make test names unique,
        use gdb_test_multiline instead of gdb_py_test_multiple,
        use $gdb_test_name.
        * gdb.guile/guile.exp: Make test names unique, use $gdb_test_name

2020-06-26  Nick Alcock  <nick.alcock@oracle.com>

        * configure.ac: Add --enable-libctf.
        * aclocal.m4: sinclude ../config/enable.m4.
        * Makefile.in (site.exp): Add enable_libctf to site.exp.
        * lib/gdb.exp (skip_ctf_tests): Use it.
        * gdb.base/ctf-constvars.exp: Error message tweak.
        * gdb.base/ctf-ptype.exp: Likewise.
        * configure: Regenerate.

2020-06-26  Gary Benson <gbenson@redhat.com>

        * gdb.cp/try_catch.cc: Include string.h.
        (main): Replace comparison against string literal with
        strcmp, avoiding build failure with -Wstring-compare.
        Add "marker test-complete".
        * gdb.cp/try_catch.exp: Run the test to the above marker,
        then verify that the value of "test" is still true.

2020-06-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-tdesc-regs.exp: New test cases.

2020-06-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-tdesc-regs.exp: Extend test case.

2020-06-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-tdesc-loading-01.xml: New file.
        * gdb.arch/riscv-tdesc-loading-02.xml: New file.
        * gdb.arch/riscv-tdesc-loading-03.xml: New file.
        * gdb.arch/riscv-tdesc-loading-04.xml: New file.
        * gdb.arch/riscv-tdesc-loading.exp: New file.

2020-06-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-tdesc-regs.exp: Extend test case.

2020-06-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-tdesc-regs-32.xml: New file.
        * gdb.arch/riscv-tdesc-regs-64.xml: New file.
        * gdb.arch/riscv-tdesc-regs.c: New file.
        * gdb.arch/riscv-tdesc-regs.exp: New file.

2020-06-24  Pedro Alves  <palves@redhat.com>

        * gdb.arch/amd64-entry-value-paramref.exp: Use
        prepare_for_testing_full and don't pass "c++" for the .S file
        build spec.
        * gdb.compile/compile-cplus.exp: Don't compile $srcfile3 with
        $options, since it's an assembly file.  Remove -Wno-deprecated.
        * lib/gdb.exp (gdb_compile): Pass "-x c++" explicitly when
        compiling C++ programs.

2020-06-24  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_compile): Update intro comment.  If C/C++ with
        Clang, add "-Wno-unknown-warning-option" to the options.

2020-06-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.xml/tdesc-reload.c: New file.
        * gdb.xml/tdesc-reload.exp: New file.
        * gdb.xml/maint-xml-dump-01.xml: New file.
        * gdb.xml/maint-xml-dump-02.xml: New file.
        * gdb.xml/maint-xml-dump.exp: New file.

2020-06-23  Sandra Loosemore  <sandra@codesourcery.com>

        * lib/completion-support.exp (test_gdb_completion_offers_commands):
        Adjust for omitted commands when TUI is disabled.

2020-06-23  Gary Benson <gbenson@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.cp/namespace.cc: Improve -Wunused-value fix.
        * gdb.cp/nsimport.cc: Likewise.
        * gdb.cp/nsnested.cc: Likewise.
        * gdb.cp/nsnoimports.cc: Likewise.
        * gdb.cp/nsusing.cc: Likewise.
        * gdb.cp/smartp.cc: Likewise.
        * gdb.python/py-pp-integral.c: Likewise.
        * gdb.python/py-pp-re-notag.c: Likewise.

2020-06-23  Gary Benson <gbenson@redhat.com>

        * gdb.cp/namespace.cc: Avoid build failure with -Wunused-value.
        * gdb.cp/nsimport.cc: Likewise.
        * gdb.cp/nsnested.cc: Likewise.
        * gdb.cp/nsnoimports.cc: Likewise.
        * gdb.cp/nsusing.cc: Likewise.
        * gdb.cp/smartp.cc: Likewise.
        * gdb.python/py-pp-integral.c: Likewise.
        * gdb.python/py-pp-re-notag.c: Likewise.

2020-06-22  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/default-args.exp: New test.
        * gdb.base/default-args.c: New file.
        * gdb.base/alias.exp: Update expected error msg for alias foo=bar.
        * gdb.base/default.exp: Update to new help text.
        * gdb.base/help.exp: Likewise.
        * gdb.base/page.exp: Likewise.
        * gdb.base/style.exp: Likewise.
        * gdb.guile/guile.exp: Likewise.
        * gdb.python/python.exp: Likewise.

2020-06-22  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/source-dir.exp (test_truncated_comp_dir): Skip on
        remote host.  Fix search path syntax on Windows host.

2020-06-21  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/attach.exp: Test priority of 'exec-file' changed
        over 'exec-file-mismatch'.
        * gdb.base/attach.c: Mark should_exit volatile.
        * gdb.base/attach2.c: Likewise.  Add a comment explaining
        why the sleep cannot be big.
        * gdb.base/attach3.c: New file.

2020-06-20  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.mi/mi-sym-info.exp: Adjust filename patterns to make directory
        prefix optional.

2020-06-20  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/list-missing-source.exp: Correct $srcfile manipulation
        for remote host.

2020-06-19  Sandra Loosemore  <sandra@codesourcery.com>
            Hafiz Abid Qadeer  <abidh@codesourcery.com>

        * gdb.xml/tdesc-regs.exp (load_description): Correct pathname of
        file sent to remote host.
        (top level): Allow int32_t as type of 32-bit register.

2020-06-19  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_note): New proc.
        * lib/future.exp (gdb_default_target_compile_1): Factor out of ...
        (gdb_default_target_compile): ... here.  Only call
        gdb_default_target_compile_1 if use_gdb_compile(<lang>) is set.
        (use_gdb_compile): Change to array.
        (toplevel): Update sets of use_gdb_compile to specify language.
        Warn about default_target_compile override.  Store dejagnu's version
        of default_target_compile in dejagnu_default_target_compile.

2020-06-18  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_init): Move all but call to default_gdb_init to ...
        (default_gdb_init): ... here.

2020-06-17 Sandra Loosemore <sandra@codesourcery.com>

        Fix TUI support checks in gdb.tui tests.

        * gdb.tui/basic.exp: Skip test when TUI is unsupported, don't
        just say UNSUPPORTED.
        * gdb.tui/corefile-run.exp: Likewise.
        * gdb.tui/empty.exp: Likewise.
        * gdb.tui/list-before.exp: Likewise.
        * gdb.tui/list.exp: Likewise.
        * gdb.tui/main.exp: Likewise.
        * gdb.tui/regs.exp: Likewise.
        * gdb.tui/resize.exp: Likewise.
        * gdb.tui/tui-layout-asm-short-prog.exp: Likewise.
        * gdb.tui/tui-layout-asm.exp: Likewise.
        * gdb.tui/tui-missing-src.exp: Likewise.
        * gdb.tui/winheight.exp: Likewise.
        * gdb.tui/new-layout.exp: Likewise.  Also move check earlier.

2020-06-17 Sandra Loosemore <sandra@codesourcery.com>

        Fix TCL error in gdb.python/py-format-string.exp.

        * gdb.python/py-format-string.exp: Move test for python support
        earlier, out of function body.

2020-06-15  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/index-cache-load-twice.c: New.
        * gdb.base/index-cache-load-twice.exp: New.

2020-06-17  Keith Seitz  <keiths@redhat.com>

        * gdb.debuginfod/fetch_src_and_symbols.exp: Pass INTERNAL_GDBFLAGS
        when executing "gdb --configuration".

2020-06-17  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_tcl_unknown): New proc.
        (gdb_init): Use gdb_tcl_unknown for ::unknown override.  Make override
        conditional on presence of gdb_tcl_unknown.
        (gdb_finish): Make override undo conditional on presence of
        gdb_tcl_unknown.

2020-06-16  Tom Tromey  <tom@tromey.com>

        * gdb.python/tui-window.py (failwin): New function.  Register it
        as a TUI window type.
        * gdb.python/tui-window.exp: Create new "fail" layout.  Test it.

2020-06-16  Gary Benson <gbenson@redhat.com>

        * gdb.python/py-nested-maps.c (create_map): Add missing return
        value.
        (create_map_map): Likewise.

2020-06-15  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/jit-elf-so.exp: Refer to the global main_loader_basename
        variable.
        * gdb.base/jit-reader-simple.exp: Fix typo ("Built" -> "Build"),
        and use the already-defined 'options' variable.

2020-06-12  Andrew Burgess  <andrew.burgess@embecosm.com>
            Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_known_globals, gdb_persistent_globals): New global.
        (gdb_persistent_global, gdb_persistent_global_no_decl): New proc.
        (gdb_setup_known_globals): New proc.
        (gdb_cleanup_globals): New proc.
        * lib/gdb.exp (load_lib): New override proc.
        (gdb_stdin_log_init): Set var in_file as persistent global.
        * lib/pascal.exp (gdb_stdin_log_init): Set vars
        pascal_compiler_is_gpc, pascal_compiler_is_fpc, gpc_compiler and
        fpc_compiler as persistent global.

2020-06-12  Tom de Vries  <tdevries@suse.de>

        * lib/tuiterm.exp (spawn): Rename to ...
        (tui_spawn): ... this.
        (toplevel): Move rename of spawn ...
        (gdb_init_tuiterm): ... here.  New proc.
        (gdb_finish_tuiterm): New proc.
        * lib/gdb.exp (gdb_finish_hooks): New global var.
        (gdb_finish): Handle gdb_finish_hooks.
        (tuiterm_env): New proc.
        * gdb.python/tui-window.exp: Replace load_lib tuiterm.exp with
        tuiterm_env.
        * gdb.tui/basic.exp: Same.
        * gdb.tui/corefile-run.exp: Same.
        * gdb.tui/empty.exp: Same.
        * gdb.tui/list-before.exp: Same.
        * gdb.tui/list.exp: Same.
        * gdb.tui/main.exp: Same.
        * gdb.tui/new-layout.exp: Same.
        * gdb.tui/regs.exp: Same.
        * gdb.tui/resize.exp: Same.
        * gdb.tui/tui-layout-asm-short-prog.exp: Same.
        * gdb.tui/tui-layout-asm.exp: Same.
        * gdb.tui/tui-missing-src.exp: Same.
        * gdb.tui/winheight.exp: Same.

2020-06-12  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26110
        * lib/gdb.exp (gdb_init): Revert dejagnu's override of ::unknown.
        (gdb_finish): Reinstall dejagnu's override of ::unknown.

2020-06-11  Tom Tromey  <tom@tromey.com>

        PR gdb/18318:
        * gdb.base/printcmds.exp (test_float_accepted): Add more hex
        floating point tests.

2020-06-11  Keith Seitz  <keiths@redhat.com>

        PR gdb/21356
        * gdb.base/vla-datatypes.c (vla_factory): Add typedef for struct
        vla_struct.
        Add new struct vla_typedef and union vla_typedef_union and
        corresponding instantiation objects.
        Initialize new objects.
        * gdb.base/vla-datatypes.exp: Add tests for vla_typedef_struct_object
        and vla_typedef_union_object.
        Fixup type for vla_struct_object.

2020-06-11  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (with_override): New proc, factored out of ...
        * gdb.base/dbx.exp: ... here.  Use with_override and save_vars.

2020-06-10  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/ptype_union.exp: Remove PR24713 workaround.

2020-06-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/index-cache.exp (test_cache_disabled): Add test_prefix
        parameter, update callers.

2020-06-04  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.dwarf2/share-psymtabs-bt.exp: New file.
        * gdb.dwarf2/share-psymtabs-bt.c: New file.
        * gdb.dwarf2/share-psymtabs-bt-2.c: New file.

2020-06-04  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_file_cmd): Avoid path names in error messages.

2020-06-04  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_file_cmd): Replace incomplete gdb_expect by
        exp_continue.

2020-06-04  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_file_cmd): Use perror instead of fail.

2020-06-03  Tom de Vries  <tdevries@suse.de>

        PR symtab/26046
        * gdb.cp/breakpoint-locs-2.cc: New test.
        * gdb.cp/breakpoint-locs.cc: New test.
        * gdb.cp/breakpoint-locs.exp: New file.
        * gdb.cp/breakpoint-locs.h: New test.

2020-06-03  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25609
        * gdb.base/jit-elf-so.exp: Don't modify testing behaviour based on
        value of global verbose.
        * gdb.base/jit-elf.exp: Same.
        * gdb.base/jit-reader.exp: Same.

2020-06-02  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/multidictionary.exp: Don't use
        gdb_spawn_with_cmdline_opts.

2020-06-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.cp/step-and-next-inline.exp (do_test): Skip all tests in the
        use_header case.
        * gdb.dwarf2/dw2-inline-header-1.exp: New file.
        * gdb.dwarf2/dw2-inline-header-2.exp: New file.
        * gdb.dwarf2/dw2-inline-header-3.exp: New file.
        * gdb.dwarf2/dw2-inline-header-lbls.c: New file.
        * gdb.dwarf2/dw2-inline-header.c: New file.
        * gdb.dwarf2/dw2-inline-header.h: New file.

2020-05-30  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/cp-replace-typedefs-ns-template.cc: New.
        * gdb.linespec/cp-replace-typedefs-ns-template.exp: New.

2020-05-29  Gary Benson <gbenson@redhat.com>

        * gdb.compile/compile-cplus.exp (additional_flags): Also
        set when building with clang.
        (additional_flags, srcfilesoptions): Pass -Wno-deprecated
        when building with clang.

2020-05-29  Gary Benson <gbenson@redhat.com>

        * gdb.arch/i386-avx.exp (additional_flags): Also set when
        building with clang.
        * gdb.arch/i386-sse.exp (additional_flags): Likewise.

2020-05-29  Gary Benson <gbenson@redhat.com>

        * gdb.cp/koenig.exp (prepare_for_testing): Add
        additional_flags=-Wno-unused-comparison.
        * gdb.cp/operator.exp (prepare_for_testing): Likewise.

2020-05-28  Gary Benson <gbenson@redhat.com>

        * gdb.base/sigaltstack.c (catcher): Add default case to switch
        statement.

2020-05-28  Gary Benson <gbenson@redhat.com>

        * gdb.cp/classes.exp (prepare_for_testing): Add
        additional_flags=-Wno-deprecated-register.
        * gdb.cp/inherit.exp (prepare_for_testing): Likewise.
        * gdb.cp/misc.exp: Likewise.

2020-05-28  Gary Benson <gbenson@redhat.com>

        * gdb.linespec/cpls-ops.cc (dummy): New static global.
        (test_op_new::operator new): Add return statement.
        (test_op_new_array::operator new[]): Likewise.

2020-05-27  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/cp-completion-aliases.exp: Remove readline_is_used
        check.  Use test_gdb_complete_unique instead of
        test_gdb_complete_tab_unique + test_gdb_complete_cmd_unique.  Use
        test_gdb_complete_multiple instead of
        test_gdb_complete_tab_multiple + test_gdb_complete_cmd_multiple.

2020-05-27  Luis Machado  <luis.machado@linaro.org>

        * gdb.arch/aarch64-sighandler-regs.exp: Fix duplicated test names.
        * gdb.arch/aarch64-tagged-pointer.exp: Likewise.
        * gdb.arch/arm-disassembler-options.exp: Likewise.
        * gdb.arch/arm-disp-step.exp: Likewise.
        * gdb.arch/thumb-prologue.exp: Likewise.
        * gdb.base/async.exp: Likewise.
        * gdb.base/auxv.exp: Likewise.
        * gdb.base/complex-parts.exp: Likewise.
        * gdb.base/ena-dis-br.exp: Likewise.
        * gdb.base/foll-exec.exp: Likewise.
        * gdb.base/permissions.exp: Likewise.
        * gdb.base/relocate.exp: Likewise.
        * gdb.base/return2.exp: Likewise.
        * gdb.base/sigbpt.exp: Likewise.
        * gdb.base/siginfo-obj.exp: Likewise.
        * gdb.cp/converts.exp: Likewise.
        * gdb.cp/exceptprint.exp: Likewise.
        * gdb.cp/inherit.exp: Likewise.
        * gdb.cp/nsnoimports.exp: Likewise.
        * gdb.cp/virtbase2.exp: Likewise.
        * gdb.mi/mi-var-cmd.exp: Likewise.
        * gdb.mi/var-cmd.c: Likewise.

2020-05-26  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/arr_acc_idx_w_gap.exp: Add tests.

2020-05-26  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/arr_acc_idx_w_gap.exp: Add enum subrange tests.
        * gdb.ada/arr_acc_idx_w_gap/enum_with_gap.ads (Enum_Subrange): New
        type.
        * gdb.ada/arr_acc_idx_w_gap/enum_with_gap_main.adb (V): New
        variable.

2020-05-26  Christian Biesinger  <cbiesinger@google.com>

        * Makefile.in: Use = instead of == for the test command
        for portability.

2020-05-26  Tom de Vries  <tdevries@suse.de>

        * gdb.base/gold-gdb-index-2.c: New test.
        * gdb.base/gold-gdb-index.c: New test.
        * gdb.base/gold-gdb-index.exp: New file.
        * gdb.base/gold-gdb-index.h: New test.

2020-05-25  Tom de Vries  <tdevries@suse.de>

        * boards/gold-gdb-index.exp: New file.

2020-05-25  Simon Marchi  <simon.marchi@efficios.com>

        * boards/simavr.exp: New file.

2020-05-25  Simon Marchi  <simon.marchi@efficios.com>

        * lib/gdb.exp (gdb_run_cmd): Return success or failure.
        * gdb.base/inferior-args.exp: New file.
        * gdb.base/inferior-args.c: New file.

2020-05-25  Simon Marchi  <simon.marchi@efficios.com>

        * lib/gdb.exp (gdb_run_cmd): Change argument from args to
        inferior_args.  Pass it to gdb_reload.
        (gdb_start_cmd, gdb_starti_cmd): Change argument from args to
        inferior_args.
        (gdb_reload): Add inferior_args argument.
        * config/gdbserver.exp (gdb_reload): Add inferior_args argument,
        pass it to gdbserver_run.
        * boards/native-gdbserver.exp: Do not set noargs.
        * boards/native-extended-gdbserver.exp (gdb_reload): Add
        inferior_args argument.
        * boards/stdio-gdbserver-base.exp (gdb_reload): Likewise.
        * gdb.base/a2-run.exp: Check for use_gdb_stub.
        * gdb.base/args.exp: Likewise.

2020-05-25  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (exec_is_pie): Add comment.

2020-05-25  Tom de Vries  <tdevries@suse.de>

        * lib/jit-elf-helpers.exp (compile_and_download_n_jit_so): Use $f
        instead of $binfile in the untested message.

2020-05-25  Tom de Vries  <tdevries@suse.de>

        PR testsuite/26031
        * lib/gdb.exp (exec_is_pie): Test readelf -h output.

2020-05-25  Tom de Vries  <tdevries@suse.de>

        * boards/gold.exp: New file.

2020-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Remove completion styling test.
        * lib/gdb-utils.exp (style): Remove completion styles.

2020-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add completion styling test.
        * lib/gdb-utils.exp (style): Add completion styles.

2020-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/annota1.exp: Update expected results.
        * gdb.cp/annota2.exp: Update expected results, remove duplicate
        test name.
        * gdb.cp/annota3.exp: Update expected results.

2020-05-20  Simon Marchi  <simon.marchi@efficios.com>

        PR gdb/26016
        * gdb.base/coredump-filter.c (do_mmap): Check mmap ret val
        against MAP_FAILED.
        * gdb.base/coremaker.c (mmapdata): Likewise.
        * gdb.base/jit-reader-host.c (main): Likewise.
        * gdb.base/sym-file-loader.c (load): Likewise.
        (load_shlib): Likewise.

2020-05-20  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/array_char_idx.exp: Recognize initialized array.

2020-05-20  Tom de Vries  <tdevries@suse.de>

        PR symtab/25833
        * gdb.base/with-mf-inc.c: New test.
        * gdb.base/with-mf-main.c: New test.
        * gdb.base/with-mf.exp: New file.

2020-05-19  Tom Tromey  <tromey@adacore.com>

        * gdb.rust/simple.exp: Restore missing test result.

2020-05-19  Tom de Vries  <tdevries@suse.de>

        * gdb.base/gdb-caching-proc.exp: Fix typo.

2020-05-19  Tom Tromey  <tromey@adacore.com>

        * gdb.rust/simple.exp: Add some test descriptions.
        (test_one_slice): Use with_test_prefix.

2020-05-18  Tom de Vries  <tdevries@suse.de>

        * gdb.base/gdb-caching-proc.exp: Use with_test_prefix.

2020-05-17  Pedro Alves  <palves@redhat.com>

        PR gdb/25741
        * gdb.base/hw-sw-break-same-address.exp: New file.

2020-05-16  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-re-run.exp (test_re_run): Switch
        LAST_LOADED_FILE accordingly.

2020-05-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/alias.exp: Verify 'help aliases' shows user defined aliases.

2020-05-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/help.exp: Test apropos and help for commands
        having aliases.  Fixed comments not starting with an
        upper-case letter or not finishing with a dot.

2020-05-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/alias.exp: Update help output check.

2020-05-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/default.exp: Update output following fixes.

2020-05-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/alias.exp: Test aliases starting with a prefix of
        another alias.

2020-05-15  Gary Benson <gbenson@redhat.com>

        * gdb.base/info-os.c (main): Add return statement.
        * gdb.base/info_minsym.c (minsym_fun): Likewise.
        * gdb.base/large-frame-2.c (func): Likewise.
        * gdb.base/pr10179-a.c (foo1, bar1): Likewise.
        * gdb.base/pr10179-b.c (foo2): Likewise.
        * gdb.base/valgrind-disp-step.c (foo): Likewise.
        * gdb.base/watch-cond.c (func): Likewise.
        * gdb.multi/goodbye.c (verylongfun): Likewise.
        * gdb.multi/hello.c (commonfun): Likewise.
        * gdb.python/py-finish-breakpoint.c (call_longjmp): Likewise.
        * gdb.threads/fork-plus-threads.c (thread_func): Likewise.
        * gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
        Likewise.
        * gdb.threads/hand-call-new-thread.c (foo): Likewise.
        * gdb.threads/interrupt-while-step-over.c (child_function):
        Likewise.
        * gdb.trace/actions-changed.c (end): Likewise.

2020-05-15  Gary Benson <gbenson@redhat.com>

        * gdb.opencl/callfuncs.exp: Report when test skipped.
        * gdb.opencl/convs_casts.exp: Likewise.
        * gdb.opencl/datatypes.exp: Likewise.
        * gdb.opencl/operators.exp: Likewise.
        * gdb.opencl/vec_comps.exp: Likewise.

2020-05-15  Tom de Vries  <tdevries@suse.de>

        * gdb.base/align.exp.in: Rename to ...
        * gdb.base/align.exp.tcl: ... this.
        * gdb.base/align-c++.exp: Update.
        * gdb.base/align-c.exp: Update.
        * gdb.base/all-architectures.exp.in: Rename to ...
        * gdb.base/all-architectures.exp: ... this.
        * gdb.base/all-architectures-0.exp: Update.
        * gdb.base/all-architectures-1.exp: Update.
        * gdb.base/all-architectures-2.exp: Update.
        * gdb.base/all-architectures-3.exp: Update.
        * gdb.base/all-architectures-4.exp: Update.
        * gdb.base/all-architectures-5.exp: Update.
        * gdb.base/all-architectures-6.exp: Update.
        * gdb.base/all-architectures-7.exp: Update.
        * gdb.base/infcall-nested-structs.exp.in: Rename to ...
        * gdb.base/infcall-nested-structs.exp.tcl: ... this.
        * gdb.base/infcall-nested-structs-c++.exp: Update.
        * gdb.base/infcall-nested-structs-c.exp: Update.
        * gdb.base/info-types.exp.in: Rename to ...
        * gdb.base/info-types.exp.tcl: ... this.
        * gdb.base/info-types-c++.exp: Update.
        * gdb.base/info-types-c.exp: Update.
        * gdb.base/max-depth.exp.in: Rename to ...
        * gdb.base/max-depth.exp.tcl: ... this.
        * gdb.base/max-depth-c++.exp: Update.
        * gdb.base/max-depth-c.exp: Update.
        * gdb.cp/cpexprs.exp.in: Rename to ...
        * gdb.cp/cpexprs.exp.tcl: ... this.
        * gdb.cp/cpexprs-debug-types.exp: Update.
        * gdb.cp/cpexprs.exp: Update.
        * gdb.cp/infcall-nodebug.exp.in: Rename to ...
        * gdb.cp/infcall-nodebug.exp.tcl: ... this.
        * gdb.cp/infcall-nodebug-c++-d0.exp: Update.
        * gdb.cp/infcall-nodebug-c++-d1.exp: Update.
        * gdb.cp/infcall-nodebug-c-d0.exp: Update.
        * gdb.cp/infcall-nodebug-c-d1.exp: Update.
        * gdb.dwarf2/clang-debug-names.exp.in: Rename to ...
        * gdb.dwarf2/clang-debug-names.exp.tcl: ... this.
        * gdb.dwarf2/clang-debug-names-2.exp: Update.
        * gdb.dwarf2/clang-debug-names.exp: Update.

2020-05-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/check-test-names.exp: Remove code that prevents this file
        loading when tests are run in parallel.

2020-05-15  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-kill.exp (start_inferior): Remove
        'testpid' parameter.  Refer to namespace variable directly.
        (testpid): Declare as namespace variable.

2020-05-15  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-kill.exp: Wrap in namespace.
        (start_inferior): Add TESTPID parameter.  Use it instead of the
        testpid global.
        (top level): Define empty TESTPID array, and pass it down to
        start_inferior.

2020-05-14  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/nested-funcs-2.exp: Use gdb_test_stdio to test inferior
        output.

2020-05-14  Tom de Vries  <tdevries@suse.de>

        * gdb.base/align.exp: Split into ...
        * gdb.base/align.exp.in: ...
        * gdb.base/align-c++.exp: ...
        * gdb.base/align-c.exp: ... these.
        * gdb.base/infcall-nested-structs.exp: Split into ...
        * gdb.base/infcall-nested-structs.exp.in: ...
        * gdb.base/infcall-nested-structs-c++.exp: ...
        * gdb.base/infcall-nested-structs-c.exp: ... these.
        * gdb.base/info-types.exp: Split into ...
        * gdb.base/info-types.exp.in: ...
        * gdb.base/info-types-c++.exp: ...
        * gdb.base/info-types-c.exp: ... these.
        * gdb.base/max-depth.exp: Split into ...
        * gdb.base/max-depth.exp.in: ...
        * gdb.base/max-depth-c++.exp: ...
        * gdb.base/max-depth-c.exp: ... these.
        * gdb.cp/infcall-nodebug.exp: Split into ...
        * gdb.cp/infcall-nodebug.exp.in: ...
        * gdb.cp/infcall-nodebug-c++-d0.exp: ...
        * gdb.cp/infcall-nodebug-c++-d1.exp: ...
        * gdb.cp/infcall-nodebug-c-d0.exp: ...
        * gdb.cp/infcall-nodebug-c-d1.exp: ... these.

2020-05-14  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-exit.c: New file.
        * gdb.multi/multi-exit.exp: New file.
        * gdb.multi/multi-kill.c: New file.
        * gdb.multi/multi-kill.exp: New file.

2020-05-14  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.base/annota1.exp: Update the expected output.
        * gdb.cp/annota2.exp: Ditto.

2020-05-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/check-test-names.exp: Disable when testing is being run in
        parallel.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.base/jit-elf.exp: Fix string concat.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * lib/jit-elf-helpers.exp: Don't use undefined variables in untested
        messages.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.multi/multi-term-settings.exp: Use with_test_prefix.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/catch_ex.exp: Use with_test_prefix.
        * gdb.ada/mi_catch_ex.exp: Same.
        * gdb.ada/mi_catch_ex_hand.exp: Same.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/complex.exp: Use with_test_prefix.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.trace/passcount.exp: Fix test-names.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.pascal/gdb11492.exp: Use with_test_prefix.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.gdb/complaints.exp: Use with_test_prefix.
        * gdb.xml/tdesc-regs.exp: Same.
        * gdb.opt/inline-locals.exp: Fix test name.

2020-05-12  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/comp-unit-lang.exp: Use with_test_prefix.
        * gdb.dwarf2/dw2-bad-parameter-type.exp: Same.
        * gdb.dwarf2/implref-struct.exp: Same.
        * gdb.dwarf2/varval.exp: Ensure get_sizeof is called once per type.
        * gdb.dwarf2/data-loc.exp: Same.  Remove duplicate test.

2020-05-11  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/jit-so.exp (one_jit_test): Change test name.

2020-05-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/check-test-names.exp (all_test_names): New module variable.
        (counts): Add 'duplicates' field.
        (_check_duplicates): New procedure.
        (check): Also check for duplicates.
        (do_log_summary): Print duplicates count.
        (do_reset_vars): Reset counter for duplicate test names, and
        discard all know test names.

2020-05-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp: Include check-test-names.exp library.
        * lib/check-test-names.exp: New file.

2020-05-11  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/packed_tagged.exp: Change kfail into xfail.

2020-05-11  Keith Seitz  <keiths@redhat.com>

        * gdb.ada/attr_ref_and_charlit.exp: Fix typo.

2020-05-11  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/cpexprs.exp: Move everything except flags setting ...
        * gdb.cp/cpexprs.exp.in: .. here.
        * gdb.cp/cpexprs-debug-types.exp: Include cpexprs.exp.in instead of
        cpexprs.exp.

2020-05-11  Keith Seitz  <keiths@redhat.com>

        * gdb.ada/arrayparam.exp: Resolve duplicate and tail parentheses
        test names.
        * gdb.ada/arrayptr.exp: Likewise.
        * gdb.ada/assign_arr.exp: Likewise.
        * gdb.ada/attr_ref_and_charlit.exp: Likewise.
        * gdb.ada/bp_on_var.exp: Likewise.
        * gdb.ada/call_pn.exp: Likewise.
        * gdb.ada/complete.exp: Likewise.
        * gdb.ada/fun_overload_menu.exp: Likewise.
        * gdb.ada/funcall_param.exp: Likewise.
        * gdb.ada/funcall_ref.exp: Likewise.
        * gdb.ada/packed_array_assign.exp: Likewise.
        * gdb.ada/same_component_name.exp: Likewise.
        * gdb.ada/type_coercion.exp: Likewise.
        * gdb.ada/unc_arr_ptr_in_var_rec.exp: Likewise.
        * gdb.ada/variant_record_packed_array.exp: Likewise.

2020-05-11  Tom de Vries  <tdevries@suse.de>

        PR symtab/25941
        * gdb.dwarf2/clang-debug-names.exp.in: New include exp file, factored
        out of ...
        * gdb.dwarf2/clang-debug-names.exp: ... here.
        * gdb.dwarf2/clang-debug-names-2.exp: New file.  Include
        clang-debug-names.exp.in.
        * gdb.dwarf2/clang-debug-names-2-foo.c: New test.
        * gdb.dwarf2/clang-debug-names-2.c: New test.

2020-05-10  Alok Kumar Sharma  <alokkumar.sharma@amd.com>

        * lib/fortran.exp (fortran_main): New Proc, handle flang MAIN_,
        (fortran_runto_main): New Proc, fortran version of runto_main.
        * gdb.fortran/array-bounds-high.exp: Handle flang MAIN_
        * gdb.fortran/array-bounds.exp: Likewise.
        * gdb.fortran/array-slices.exp: Likewise.
        * gdb.fortran/block-data.exp: Likewise.
        * gdb.fortran/charset.exp: Likewise.
        * gdb.fortran/common-block.exp: Likewise.
        * gdb.fortran/complex.exp: Likewise.
        * gdb.fortran/derived-type-function.exp: Likewise.
        * gdb.fortran/derived-type.exp: Likewise.
        * gdb.fortran/info-modules.exp: Likewise.
        * gdb.fortran/info-types.exp: Likewise.
        * gdb.fortran/intrinsics.exp: Likewise.
        * gdb.fortran/library-module.exp: Likewise.
        * gdb.fortran/logical.exp: Likewise.
        * gdb.fortran/max-depth.exp: Likewise.
        * gdb.fortran/module.exp: Likewise.
        * gdb.fortran/multi-dim.exp: Likewise.
        * gdb.fortran/nested-funcs.exp: Likewise.
        * gdb.fortran/print-formatted.exp: Likewise.
        * gdb.fortran/print_type.exp: Likewise.
        * gdb.fortran/printing-types.exp: Likewise.
        * gdb.fortran/ptr-indentation.exp: Likewise.
        * gdb.fortran/ptype-on-functions.exp: Likewise.
        * gdb.fortran/subarray.exp: Likewise.
        * gdb.fortran/vla-alloc-assoc.exp: Likewise.
        * gdb.fortran/vla-datatypes.exp: Likewise.
        * gdb.fortran/vla-history.exp: Likewise.
        * gdb.fortran/vla-ptr-info.exp: Likewise.
        * gdb.fortran/vla-ptype-sub.exp: Likewise.
        * gdb.fortran/vla-ptype.exp: Likewise.
        * gdb.fortran/vla-sizeof.exp: Likewise.
        * gdb.fortran/vla-type.exp: Likewise.
        * gdb.fortran/vla-value-sub-arbitrary.exp: Likewise.
        * gdb.fortran/vla-value-sub-finish.exp: Likewise.
        * gdb.fortran/vla-value-sub.exp: Likewise.
        * gdb.fortran/vla-value.exp: Likewise.
        * gdb.fortran/whatis_type.exp: Likewise.
        * gdb.mi/mi-var-child-f.exp: Likewise.

2020-05-09  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/clang-debug-names.exp: Remove PR25952 kfail.

2020-05-08  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/clang-debug-names.c: New test.
        * gdb.dwarf2/clang-debug-names.exp: New file.

2020-05-06  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.arch/amd64-prologue-skip-cf-protection.exp: New file.
        * gdb.arch/amd64-prologue-skip-cf-protection.c: New file.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/consecutive-precsave.exp: Handle if instruction after
        breakpoint is at a "recommended breakpoint location".
        * gdb.reverse/consecutive-reverse.exp: Same.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.base/watchpoint-reuse-slot.exp (stepi): Print $pc to get current
        address.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.base/watchpoint-reuse-slot.exp: Fix incorrect assignment.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.base/store.exp (check_set, up_set): Allowing missing location
        info for r.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.base/shlib-call.exp: Add extra step to reach shmain.c:42, if
        necessary.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * lib/unbuffer_output.c (gdb_unbuffer_output): Change return type to
        void.

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (is_stmt_addresses, hex_in_list): New proc, factored out
        of ...
        * gdb.base/async.exp: ... here.
        * gdb.base/consecutive.exp: Handle if 2nd breakpoint is at a
        "recommended breakpoint location".

2020-05-06  Tom de Vries  <tdevries@suse.de>

        * gdb.compile/compile-ifunc.exp: Use -Wno-attribute-alias.

2020-05-04  Tom de Vries  <tdevries@suse.de>

        * gdb.base/async.exp: Check whether instruction addresses are a
        "recommended breakpoint location".

2020-05-03  Tom Tromey  <tom@tromey.com>

        * gdb.base/sepdebug.exp: Remove "catch" test.
        * gdb.base/break.exp: Remove "catch" test.
        * gdb.base/default.exp: Update expected output.

2020-05-02  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (supports_mpx_check_pointer_bounds): New proc.
        * gdb.arch/i386-mpx-call.exp: Use supports_mpx_check_pointer_bounds.
        * gdb.arch/i386-mpx-map.exp: Same.
        * gdb.arch/i386-mpx-sigsegv.exp: Same.
        * gdb.arch/i386-mpx-simple_segv.exp: Same.
        * gdb.arch/i386-mpx.exp: Same.

2020-05-02  Tom de Vries  <tdevries@suse.de>

        * gdb.base/psym-external-decl.c (main): Add use of variable aaa.

2020-05-01  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/operator_bp.exp: Allow more than required amount of
        breakpoint.

2020-05-01  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/until-reverse.c (main): Fix Wunused-result warning.

2020-04-30  Hannes Domani  <ssbssa@yahoo.de>

        PR gdb/18706
        * gdb.cp/stub-array-size.cc: New test.
        * gdb.cp/stub-array-size.exp: New file.
        * gdb.cp/stub-array-size.h: New test.
        * gdb.cp/stub-array-size2.cc: New test.

2020-04-30  Hannes Domani  <ssbssa@yahoo.de>

        * gdb.python/py-format-string.exp: Adjust pretty_arrays expected
        output to the new format.

2020-04-29  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/break.exp: Use with_test_prefix.

2020-04-29  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (debug_types): New proc.
        * gdb.guile/scm-symtab.exp: Add xfail for PR gcc/90232.
        * gdb.python/py-symtab.exp: Same.

2020-04-29  Hannes Domani  <ssbssa@yahoo.de>

        PR gdb/17320
        * gdb.base/pretty-array.c: New test.
        * gdb.base/pretty-array.exp: New file.

2020-04-29  Tom de Vries  <tdevries@suse.de>

        PR symtab/25889
        * gdb.cp/cpexprs.exp: Adapt for inclusion.
        * gdb.cp/cpexprs-debug-types.exp: New file.  Set -fdebug-types-section
        and include cpexprs.exp.

2020-04-28 Mark Williams <mark@myosotissp.com>

        PR gdb/24480
        * dw4-toplevel-types.exp: Test for top level types.
        * dw4-toplevel-types.cc: Test for top level types.

2020-04-28  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.threads/stop-with-handle.exp: Fix typo in comment
        (theads -> threads).

2020-04-28  Tom de Vries  <tdevries@suse.de>

        * gdb.opt/inline-cmds.exp: Set KFAIL PR.

2020-04-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/info-macros.exp: Remove KFAIL.  Add missing trailing ".*".

2020-04-28  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/array_ptr_renaming.exp: Add PR number in KFAIL.

2020-04-28  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/main-foo.c: New test.
        * gdb.dwarf2/struct-with-sig.exp: New file.

2020-04-25  Tom de Vries  <tdevries@suse.de>

        * boards/debug-types.exp: New file.

2020-04-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.btrace/multi-inferior.exp: Avoid paths in test names.

2020-04-24  Tom Tromey  <tom@tromey.com>

        PR symtab/12707:
        * gdb.python/py-symbol.exp: Update expected results for
        linkage_name test.
        * gdb.cp/print-demangle.exp: New file.
        * gdb.base/c-linkage-name.exp: Fix test.
        * gdb.guile/scm-symbol.exp: Update expected results for
        linkage_name test.

2020-04-24  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/dw2-namespaceless-anonymous.S: Remove.
        * gdb.dwarf2/dw2-namespaceless-anonymous.c: New file.
        * gdb.dwarf2/dw2-namespaceless-anonymous.exp: Use DWARF
        assembler.

2020-04-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Set language of CU to
        C++.

2020-04-24  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/frame_arg_lang.exp: Run with multiple -fgnat-encodings
        values.
        * gdb.ada/funcall_ref.exp: Run with multiple -fgnat-encodings
        values.  Update test for minimal encodings.
        * gdb.ada/lang_switch.exp: Update test for minimal encodings.
        * gdb.ada/var_rec_arr.exp: Run with multiple -fgnat-encodings
        values.  Update test for minimal encodings.

2020-04-24  Tom Tromey  <tromey@adacore.com>

        PR python/23662:
        * gdb.ada/variant.exp: Add Python checks.
        * gdb.rust/simple.exp: Add dynamic type checks.

2020-04-24  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mi_var_array.exp: Try all -fgnat-encodings settings.
        Make array type matching more lax.
        * gdb.ada/mi_var_union.exp: Try all -fgnat-encodings settings.
        * gdb.ada/mi_variant.exp: New file.
        * gdb.ada/mi_variant/pck.ads: New file.
        * gdb.ada/mi_variant/pkg.adb: New file.
        * gdb.ada/packed_tagged.exp: Try all -fgnat-encodings settings.
        * gdb.ada/unchecked_union.exp: Try all -fgnat-encodings settings.

2020-04-24  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/variant.exp: Add dynamic field offset tests.
        * gdb.ada/variant/pck.ads (Nested_And_Variable): New type.
        * gdb.ada/variant/pkg.adb: Add new variables.

2020-04-24  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/variant.exp: New file
        * gdb.ada/variant/pkg.adb: New file
        * gdb.ada/variant/pck.adb: New file

2020-04-24  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (clean_restart): Reset errcnt and warncnt.

2020-04-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dwzbuildid.exp: Add quiet to dwzbuildid-mismatch compile
        flags.

2020-04-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-error.exp: Add quiet to compile flags.

2020-04-24  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (default_gdb_start): Handle eof.
        (clean_restart): Detect and handle gdb_start failure.  Return -1 upon
        failure.
        * gdb.base/readnever.exp: Handle clean_restart failure.

2020-04-23  Tom de Vries  <tdevries@suse.de>

        * gdb.base/decl-before-def.exp: Run to main and print a again.

2020-04-23  Tom de Vries  <tdevries@suse.de>

        * gdb.base/decl-before-def-decl.c: New test.
        * gdb.base/decl-before-def-def.c: New test.
        * gdb.base/decl-before-def.exp: New file.

2020-04-23  Tom de Vries  <tdevries@suse.de>

        * gdb.base/readnever.exp: Skip if GDBFLAGS contain -readnow/--readnow.

2020-04-22  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/dw2-ref-missing-frame-func.c (.debug_aranges): Fix
        debug_info_offset.
        * gdb.mi/dw2-ref-missing-frame.exp: Make sure $objfuncfile comes
        before $objsfile in the line line.

2020-04-22  Tom de Vries  <tdevries@suse.de>

        * gdb.dlang/watch-loc.c (.debug_aranges): Fix _Dmain length.

2020-02-18  Mihails Strasuns  <mihails.strasuns@intel.com>

        * gdb.base/jit-attach-pie.c: Use jit-protocol.h.
        * gdb.base/jit-elf-main.c: Use jit-protocol.h.
        * gdb.base/jit-reader-host.c: Use jit-protocol.h.
        * gdb.base/jit-reader-simple-jit.c: Use jit-protocol.h.
        * gdb.base/jit-protocol.h: Update definitions to match all usage
          contexts.

2020-02-18  Mihails Strasuns  <mihails.strasuns@intel.com>

        * gdb.base: Rename all jit related test and source files.

2020-02-18  Mihails Strasuns  <mihails.strasuns@intel.com>

        * gdb.base/jit-reader.exp: Relax register output check.

2020-04-22  Tom de Vries  <tdevries@suse.de>

        PR symtab/25764
        * gdb.base/psym-external-decl-2.c: New test.
        * gdb.base/psym-external-decl.c: New test.
        * gdb.base/psym-external-decl.exp: New file.
        * gdb.threads/tls.exp: Add PR25807 kfail.

2020-04-22  Tom de Vries  <tdevries@suse.de>

        PR symtab/25801
        * gdb.dwarf2/imported-unit.exp: Test that we can get imported_unit.c
        in "info source" output.

2020-04-22  Tom de Vries  <tdevries@suse.de>

        PR symtab/25700
        * gdb.dwarf2/imported-unit.exp: Verify that there's only one partial
        symtab for imported_unit.c.

2020-04-21  Gary Benson <gbenson@redhat.com>

        * gdb.base/advance.c (func): New argument, to match call site.
        (func2, func3): Add return statements.

2020-04-21  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.multi/run-only-second-inf.c: New file.
        * gdb.multi/run-only-second-inf.exp: New file.

2020-04-21  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/multi-inferior.c: New test.
        * gdb.btrace/multi-inferior.exp: New file.

2020-04-21  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/enable-new-thread.c: New test.
        * gdb.btrace/enable-new-thread.exp: New file.

2020-04-21  Tom de Vries  <tdevries@suse.de>

        PR gdb/25471
        * gdb.threads/killed-outside.c: New test.
        * gdb.threads/killed-outside.exp: New file.

2020-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.base/nested-subp1.exp: Use support_nested_function_tests.
        * gdb.base/nested-subp2.exp: Likewise.
        * gdb.base/nested-subp3.exp: Likewise.

2020-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.base/nested-subp1.exp: Disable test when using clang.
        * gdb.base/nested-subp2.exp: Likewise.
        * gdb.base/nested-subp3.exp: Likewise.

2020-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.cp/exception.cc: Fix compilation error with clang.

2020-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.trace/tspeed.c: Fix compilation error with clang.

2020-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.base/jit-main.c: Fix compilation error with clang.

2020-04-17  Kamil Rytarowski  <n54@gmx.com>

        * gdb.base/attach-twice.c: Include "sys/types.h".
        (PTRACE_ATTACH): Add fallback definition.
        (main): Pass `0' to the 4th argument of `ptrace'.

2020-04-17  Kamil Rytarowski  <n54@gmx.com>

        * gdb.base/fork-running-state.c: Include "signal.h".

2020-04-17  Tom Tromey  <tromey@adacore.com>

        * gdb.cp/maint.exp (test_help): Simplify multiple_help_body.
        Update tests.
        * gdb.btrace/cpu.exp: Update tests.
        * gdb.base/maint.exp: Update tests.
        * gdb.base/default.exp: Update tests.
        * gdb.base/completion.exp: Update tests.

2020-04-16  Tom de Vries  <tdevries@suse.de>

        PR symtab/25791
        * gdb.dwarf2/gdb-add-index.exp (add_gdb_index): Move ...
        (ensure_gdb_index): and factor out and move ...
        * lib/gdb.exp (add_gdb_index, ensure_gdb_index): ... here.
        * gdb.dwarf2/imported-unit-runto-main.exp: New file.

2020-04-16  Tom de Vries  <tdevries@suse.de>

        * gdb.base/maint-expand-symbols-header-file.exp: Set language before
        loading exec.

2020-04-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/many-completions.exp: New file.

2020-04-14  Tom de Vries  <tdevries@suse.de>

        PR symtab/25718
        * gdb.dwarf2/dw2-symtab-includes.exp: New file.

2020-04-14  Tom de Vries  <tdevries@suse.de>

        PR symtab/25720
        * gdb.base/maint-expand-symbols-header-file.c: New test.
        * gdb.base/maint-expand-symbols-header-file.exp: New file.
        * gdb.base/maint-expand-symbols-header-file.h: New test.

2020-04-14  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-inline-many-frames.exp (get_func_info): Delete.
        * gdb.dwarf2/dw2-inline-small-func.exp: Pass options to
        get_func_info.
        (get_func_info): Delete.
        * gdb.dwarf2/dw2-is-stmt-2.exp (get_func_info): Delete.
        * gdb.dwarf2/dw2-is-stmt.exp (get_func_info): Delete.
        * lib/dwarf.exp (get_func_info): New function.

2020-04-13  Tom de Vries  <tdevries@suse.de>

        * lib/ada.exp (find_ada_tool): Pass --GCC and -B to gnatlink, similar
        to what find_gnatmake does.

2020-04-10  Tom de Vries  <tdevries@suse.de>

        * gdb.base/style.exp: Expect "Expanding full symbols" message for
        -readnow.

2020-04-10  Tom de Vries  <tdevries@suse.de>

        PR cli/25808
        * gdb.base/style.c: Add leading newlines.
        * gdb.base/style.exp: Use gdb_get_line_number to get specific lines.
        Check listing of main's one-line body.

2020-04-08  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (psymtabs_p): New proc.
        * gdb.dwarf2/imported-unit.exp: Mark "no static partial symbols in
        importing unit" unsupported if there are no partial symbols.

2020-04-08  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25760
        * gdb.ada/call_pn.exp: Call "maint expand-symtabs".  Add xfails.

2020-04-07  Tom de Vries  <tdevries@suse.de>

        PR symtab/25796
        * gdb.dwarf2/imported-unit-abstract-const-value.exp: New file.

2020-04-07  Tom de Vries  <tdevries@suse.de>

        * gdb.base/check-psymtab.c: New test.
        * gdb.base/check-psymtab.exp: New file.

2020-04-06  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/variant-record/proc.adb: New file.
        * gdb.ada/variant-record/value.adb: New file.
        * gdb.ada/variant-record/value.s: New file.
        * gdb.ada/variant-record.exp: New file.

2020-04-03  Hannes Domani  <ssbssa@yahoo.de>

        PR gdb/25325
        * gdb.cp/typed-enum.cc: New test.
        * gdb.cp/typed-enum.exp: New file.

2020-04-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-inline-small-func-lbls.c: New file.
        * gdb.dwarf2/dw2-inline-small-func.c: New file.
        * gdb.dwarf2/dw2-inline-small-func.exp: New file.
        * gdb.dwarf2/dw2-inline-small-func.h: New file.
        * gdb.opt/inline-small-func.c: New file.
        * gdb.opt/inline-small-func.exp: New file.
        * gdb.opt/inline-small-func.h: New file.

2020-04-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/dwarf.exp (Dwarf::lines::program::DW_LNS_set_file): New
        function.

2020-04-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/dwarf.exp (function_range): Allow compiler options to be
        specified.

2020-04-02  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/break-inline-psymtab-2.c (bar): Add
        __attribute__((always_inline)).
        * gdb.dwarf2/break-inline-psymtab.exp: Don't use -O2.

2020-04-02  Tom de Vries  <tdevries@suse.de>

        * lib/gdbserver-support.exp (gdbserver_exit): Factor out of ...
        (gdbserver_gdb_exit): ... here.  Add timeout warning.
        * gdb.multi/multi-target.exp (server_spawn_ids): New global var.
        (connect_target_extended_remote): Append new server_spawn_id to
        server_spawn_ids.
        (cleanup): New proc.
        (setup, <toplevel>): Call cleanup.

2020-04-02  Tom de Vries  <tdevries@suse.de>

        * gdb.base/main-psymtab.exp: New file.

2020-04-02  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/mixed-lang-stack.exp: Accept new complex printing style.

2020-04-01  Tom Tromey  <tom@tromey.com>

        * gdb.base/complex-parts.exp: Add type tests.

2020-04-01  Tom Tromey  <tom@tromey.com>

        * gdb.base/complex-parts.exp: Add arithmetic tests.

2020-04-01  Tom Tromey  <tom@tromey.com>

        * gdb.compile/compile.exp: Update.
        * gdb.compile/compile-cplus.exp: Update.
        * gdb.base/varargs.exp: Update.
        * gdb.base/floatn.exp: Update.
        * gdb.base/endianity.exp: Update.
        * gdb.base/callfuncs.exp (do_function_calls): Update.
        * gdb.base/funcargs.exp (complex_args, complex_integral_args)
        (complex_float_integral_args): Update.
        * gdb.base/complex.exp: Update.
        * gdb.base/complex-parts.exp: Update.

2020-04-01  Tom Tromey  <tromey@adacore.com>

        * gdb.rust/union.rs: New file.
        * gdb.rust/union.exp: New file.
        * gdb.rust/simple.rs (Union, Union2): Move to union.rs.
        (main): Update.
        * gdb.rust/simple.exp: Move union tests to union.exp.

2020-04-01  Tom Tromey  <tromey@adacore.com>

        * gdb.rust/simple.rs (main): Remove "y0".

2020-04-01  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.multi/stop-all-on-exit.c: New test.
        * gdb.multi/stop-all-on-exit.exp: New file.

2020-04-01  Hannes Domani  <ssbssa@yahoo.de>

        PR gdb/24789
        * gdb.cp/misc.cc: Add integer reference variable.
        * gdb.cp/misc.exp: Add test.

2020-04-01  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.server/stop-reply-no-thread.exp: Enhance the test
        scenario to cover execution until the end and also the case

2020-03-31  Tom de Vries  <tdevries@suse.de>

        * gdb.base/c-linkage-name.exp: Fix test-case comment.  Set language to
        c.  Use "maint info symtabs" to check symtab expansion.

2020-03-30  Tom de Vries  <tdevries@suse.de>

        * gdb.base/c-linkage-name.exp: Use readnow call to mark a test
        unsupported.
        (verify_psymtab_expanded): Move ...
        * lib/gdb.exp (verify_psymtab_expanded): ... here.  Add unsupported
        test.
        (readnow): New proc.

2020-03-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/mixed-lang-stack.exp: Replace two hard coded address
        with $hex.

2020-03-20  Tom Tromey  <tromey@adacore.com>

        * gdb.dwarf2/dw2-ranges-base.exp: Update regular expressions.

2020-03-20  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/sub_variant/subv.adb: New file.
        * gdb.ada/sub_variant.exp: New file.

2020-03-20  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): Bail out if
        first break fails.
        * gdb.threads/step-over-trips-on-watchpoint.exp: (do_test): Same.

2020-03-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.server/exit-multiple-threads.c: New file.
        * gdb.server/exit-multiple-threads.exp: New file.

2020-03-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/mixed-lang-stack.c: New file.
        * gdb.fortran/mixed-lang-stack.cpp: New file.
        * gdb.fortran/mixed-lang-stack.exp: New file.
        * gdb.fortran/mixed-lang-stack.f90: New file.

2020-03-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.linespec/cp-completion-aliases.cc: New file.
        * gdb.linespec/cp-completion-aliases.exp: New file.

2020-03-19  Tom de Vries  <tdevries@suse.de>

        * gdb.opt/inline-locals.exp: Add kfail PR number.  Make kfail matching
        more precise.

2020-03-18  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/break-inline-psymtab-2.c: New test.
        * gdb.dwarf2/break-inline-psymtab.c: New test.
        * gdb.dwarf2/break-inline-psymtab.exp: New file.

2020-03-16  Tom de Vries  <tdevries@suse.de>

        * lib/cache.exp (gdb_do_cache): Add and handle local variables
        cache_verify and cache_verify_proc.

2020-03-15  Tom de Vries  <tdevries@suse.de>

        * gdb.server/solib-list.exp: Handle
        'Load new symbol table from "/lib64/ld-2.26.so"? (y or n)'.

2020-03-15  Tom de Vries  <tdevries@suse.de>

        * gdb.base/maint.exp: Use exp_continue in long lines for "maint print
        objfiles".

2020-03-14  Tom Tromey  <tom@tromey.com>

        * gdb.base/cvexpr.exp: Add test for _Atomic and restrict.

2020-03-14  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/mi-fortran-modules.exp: Use exp_continue.

2020-03-14  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/attach-many-short-lived-threads.exp: Read "info threads"
        result in line-by-line fashion.

2020-03-14  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (supports_statement_frontiers): New proc.
        * gdb.cp/step-and-next-inline.exp: Use supports_statement_frontiers.

2020-03-14  Tom de Vries  <tdevries@suse.de>

        * gdb.base/printcmds.exp: Add missing quoting for "print
        teststring2".

2020-03-13  Tom Tromey  <tom@tromey.com>

        * gdb.base/printcmds.exp (test_print_strings): Add regression
        test.
        * gdb.base/printcmds.c (charptr): New typedef.
        (teststring2): New global.

2020-03-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/break-interp.exp: Use the tail of the filename, not the
        full path in the test name.
        (test_ld): Add some with_test_prefix blocks to make test names
        unique.

2020-03-13  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/mi-sym-info.exp: Fix buffer full errors, and timeouts.

2020-03-13  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/mi-sym-info.exp: Make matching more precise.

2020-03-13  Tom de Vries  <tdevries@suse.de>

        PR symtab/25646
        * gdb.dwarf2/imported-unit.exp: Add test.

2020-03-13  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/mi-sym-info-2.c (another_char_t, another_short_t): New typedef.
        (var1, var2): New variable.
        * gdb.mi/mi-sym-info.exp: Add --name to various commands to restrict
        matching symbols.

2020-03-13  Tom de Vries  <tdevries@suse.de>

        * lib/tuiterm.exp (Term::command_no_prompt_prefix): New proc.
        (Term::command): Use prompt prefix.
        (Term::enter_tui): Use command_no_prompt_prefix instead of prefix.
        * gdb.tui/tui-layout-asm-short-prog.exp: Use
        command_no_prompt_prefix instead of prefix.
        * gdb.tui/tui-layout-asm.exp: Same.

2020-03-12  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/break-interp.exp: Use foreach_with_prefix.

2020-03-12  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.arch/amd64-disp-step-avx.S: Add nops after _start.
        * gdb.arch/amd64-disp-step-avx.exp: Enable "set debug displaced
        on" while stepping over the test instruction, match printed
        message.

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * gdb.base/info-types.exp: Use exp_continue during matching of output
        of "info types".

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/execl.exp: Delete breakpoint after hitting it.

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/module.exp: Use exp_continue during matching of output
        of "info variable -n".

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-ranges-base.exp: Limit "maint info line-table" to
        gdb.dwarf2/dw2-ranges-base.c.

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * gdb.linespec/explicit.exp: Fix "complete non-unique file name" test
        in presence of GLIBC debuginfo.

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_core_cmd): Use string_to_regexp for regexp-matching
        $core.

2020-03-12  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_core_cmd): Make "No such file or directory" regexp
        more precise.

2020-03-11  Simon Marchi  <simon.marchi@efficios.com>

        * lib/gdb.exp (standard_output_file): Use `pwd -W` to convert
        from Unix to Windows path.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/minsyms.exp: Set language to ada.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.server/sysroot.exp: Allow GLIBC's printf alias __printf.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.btrace/reconnect.exp: Allow source line pattern after stepi.

2020-03-11  Tom Tromey  <tromey@adacore.com>

        * gdb.dwarf2/variant.exp: Mark discriminants as artificial.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.base/foll-fork.exp: Allow "Reading in symbols" messages.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.base/break-interp.exp: Limit verbose scope.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/logical.f90: Define variable with character type.
        * gdb.fortran/logical.exp: Use character type instead of uint8_t.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.base/list-ambiguous.exp: Set EDITOR to true.

2020-03-11  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/access_to_packed_array.exp: Test printing of expanded
        symtabs.

2020-03-10  Andrew Burgess  <andrew.burgess@embecosm.com>
            Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.cp/step-and-next-inline.cc: New file.
        * gdb.cp/step-and-next-inline.exp: New file.
        * gdb.cp/step-and-next-inline.h: New file.
        * gdb.dwarf2/dw2-is-stmt.c: New file.
        * gdb.dwarf2/dw2-is-stmt.exp: New file.
        * gdb.dwarf2/dw2-is-stmt-2.c: New file.
        * gdb.dwarf2/dw2-is-stmt-2.exp: New file.
        * gdb.dwarf2/dw2-ranges-base.exp: Update line table pattern.

2020-03-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/dwarf.exp (Dwarf::lines) Add support for modifying the
        is-stmt flag in the line table.

2020-03-09  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (cached_file): Create cache dir.

2020-03-07  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/ref-params.exp: Compare build_executable result with -1.
        * gdb.cp/rvalue-ref-params.exp: Same.

2020-03-06  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (tentative_rename, cached_file): New proc.
        * boards/cc-with-tweaks.exp: Use cached_file to create gdb.sh.

2020-03-06  Tom de Vries  <tdevries@suse.de>

        * README: Fix "the the".
        * gdb.base/dprintf.exp: Same.

2020-03-05  Tom de Vries  <tdevries@suse.de>

        * gdb.base/maint.exp: Update "main print statistics" expected output.

2020-03-04  Alok Kumar Sharma  <AlokKumar.Sharma@amd.com>

        * lib/fortran.exp (fortran_int4): Handle flang kind printing.
        (fortran_int8): Likewise.
        (fortran_real4): Likewise.
        (fortran_real8): Likewise.
        (fortran_complex4): Likewise.
        (fortran_logical4): Likewise.
        (fortran_character1): Likewise.

2020-03-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/logical.exp: Add tests that any non-zero value is
        printed as true.

2020-03-03  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/printcmds.exp: Add test to verify printf of a
        variable holding an address.

2020-03-03  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/gdb2549.exp: Fix "register values t" check-read1 timeout.

2020-03-03  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/list-thread-groups-available.exp: Use -prompt syntax for
        gdb_test_multiple call.

2020-03-03  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/mi-sym-info.exp: Add missing -prompt "$mi_gdb_prompt$" to
        gdb_test_multiple calls.

2020-03-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/default.exp: Remove test of 'set history filename'.
        * gdb.base/gdbinit-history.exp: Add tests for setting the history
        filename to the empty string.
        * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE
        and GDBHISTSIZE.

2020-03-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.server/stop-reply-no-thread.exp: Add test where T packet is
        disabled.

2020-03-02  Pedro Alves  <palves@redhat.com>
            Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_test_multiple): Handle prompt_regexp option using
        -prompt prefix, before user_code argument.  Add -lbl option likewise.
        (skip_python_tests_prompt, skip_libstdcxx_probe_tests_prompt)
        (gdb_is_target_1): Add -prompt prefix and move to before user_code
        argument.
        * gdb.base/corefile-buildid.exp: Use -lbl option.  Rewrite regexps to
        have "\r\n" at start-of-line, instead of at end-of-line.

2020-02-28  Simon Marchi  <simon.marchi@efficios.com>

        * lib/trace-support.exp (get_in_proc_agent): Adjust path to
        libinproctrace.so.

2020-02-28  Luis Machado  <luis.machado@linaro.org>

        * gdb.arch/aarch64-fp.exp: Switch from "info registers" command
        to "p/x".

2020-02-28  Luis Machado  <luis.machado@linaro.org>

        * gdb.arch/aarch64-dbreg-contents.c: Include stdlib.h, unistd.h,
        asm/ptrace.h and error.h.

2020-02-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/c-linkage-name.c (main): Call do_something_other_cu.
        (struct wrapper, do_something, mundane/symada__cS): Move ...
        * gdb.base/c-linkage-name-2.c: ... here.  New source file.
        * gdb.base/c-linkage-name.exp: Add verification of psymtab expansion.
        Update "print symada__cS before partial symtab expansion" regexp.
        Update breakpoint location.  Flush symbol cache after expansion.

2020-02-28  Luis Machado  <luis.machado@linaro.org>

        * gdb.arch/aarch64-pauth.exp: Recognize optional PAC output.

2020-02-27  Tom de Vries  <tdevries@suse.de>

        * config/sid.exp: Remove unused globals.
        * gdb.base/attach.exp: Same.
        * gdb.base/catch-load.exp: Same.
        * gdb.base/dbx.exp: Same.
        * lib/gdb.exp: Same.
        * lib/mi-support.exp: Same.
        * lib/prompt.exp: Same.

2020-02-27  Tom de Vries  <tdevries@suse.de>

        * lib/tuiterm.exp (spawn): Handle case that spawn_out(slave,name) is
        not set.

2020-02-26  Aaron Merey  <amerey@redhat.com>

        * gdb.debuginfod: New directory for debuginfod tests.
        * gdb.debuginfod/main.c: New test file.
        * gdb.debuginfod/fetch_src_and_symbols.exp: New tests.

2020-02-26  Tom de Vries  <tdevries@suse.de>

        PR gdb/25603
        * gdb.base/persistent-lang.cc: New test.
        * gdb.base/persistent-lang.exp: New file.

2020-02-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/derived-type-striding.exp: Add a new test.
        * gdb.fortran/derived-type-striding.f90: Add pointer variable for
        new test.

2020-02-25  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/cached-source-file.exp: Avoid source file paths in test
        names.

2020-02-25  Tom de Vries  <tdevries@suse.de>

        PR go/18926
        * gdb.go/methods.exp: Remove gcc/93866 xfail.

2020-02-24  Tom de Vries  <tdevries@suse.de>

        PR gdb/25592
        * gdb.base/info-locals-unused-static-var.c: New test.
        * gdb.base/info-locals-unused-static-var.exp: New file.

2020-02-22  Tom Tromey  <tom@tromey.com>

        * gdb.python/tui-window.exp: New file.
        * gdb.python/tui-window.py: New file.

2020-02-22  Tom Tromey  <tom@tromey.com>

        PR tui/17850:
        * gdb.tui/new-layout.exp: Add horizontal layout and winheight
        tests.

2020-02-22  Tom Tromey  <tom@tromey.com>

        * gdb.tui/new-layout.exp: Add sub-layout tests.

2020-02-22  Tom Tromey  <tom@tromey.com>

        * gdb.tui/new-layout.exp: New file.

2020-02-22  Tom Tromey  <tom@tromey.com>

        * gdb.rust/rust-style.rs: New file.
        * gdb.rust/rust-style.exp: New file.
        * gdb.base/style.exp: Test structure printing.
        * gdb.base/style.c (struct some_struct): New type.
        (enum etype): New type.
        (struct_value): New global.

2020-02-21  Tom de Vries  <tdevries@suse.de>

        PR go/18926
        * lib/gdb.exp (bp_location2/bp_location2_regexp): Fix.
        Remove blanket xfails.  Use message argument for gdb_breakpoint.
        Make continuing to breakpoint test conditional on setting breakpoint.
        Fix continuing to breakpoint regexp.  Add xfails for gccgo-6/7
        DW_AT_name attribute.  Add xfail for GCC PR93866.

2020-02-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/cpp-linkage-name.c: New file.
        * gdb.dwarf2/cpp-linkage-name.exp: New file.

2020-02-21  Shahab Vahedi  <shahab@synopsys.com>

        * lib/gdb.exp (gdb_wrapper_init): Reset
        "gdb_wrapper_initialized" to 0 if "wrapper_file" does
        not exist.

2020-02-20  Tom de Vries  <tdevries@suse.de>

        PR go/17018
        * gdb.go/hello.exp: Copy ...
        * gdb.go/global-local-var-shadow.exp: ... here.  New file.  Expect
        print of st to print value of global definition. Add xfail for GCC
        PR93844.
        * gdb.go/hello.exp: Remove printing of st before definition.
        * gdb.go/hello.go: Copy ...
        * gdb.go/global-local-var-shadow.go: ... here. New test.  Rename myst
        to st.
        * gdb.go/hello.go: Remove myst.  Remove comment about shadowing.

2020-02-20  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (support_go_compile): New gdb_caching_proc.
        (gdb_simple_compile): Handle compile_flags go by using .go extension
        for source file.
        * gdb.go/chan.exp: Use support_go_compile.
        * gdb.go/handcall.exp: Same.
        * gdb.go/hello.exp: Same.
        * gdb.go/integers.exp: Same.
        * gdb.go/max-depth.exp: Same.
        * gdb.go/methods.exp: Same.
        * gdb.go/package.exp: Same.
        * gdb.go/strings.exp: Same.
        * gdb.go/types.exp: Same.
        * gdb.go/unsafe.exp: Same.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * gdb.python/lib-types.exp: Make xfail more strict.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/funcall_ref.exp: Replace xfail setup by unsupported check.

2020-02-19  Doug Evans  <dje@google.com>

        PR rust/25535
        * gdb.rust/simple.exp: Add test.
        * gdb.rust/simple.rs: Add test.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * gdb.base/corefile-buildid.exp (check_exec_file): Match info files
        output line-by-line.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/cpexprs.exp: Remove c++/14186 kfail.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * gdb.base/solib-overlap.exp: Use exec instead of system to execute
        prelink.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * lib/cache.exp (ignore_pass, gdb_do_cache_wrap): New proc.
        (gdb_do_cache): Use gdb_do_cache_wrap.
        * gdb.base/gdb-caching-proc.exp (test_proc): Use gdb_do_cache_wrap.

2020-02-19  Tom de Vries  <tdevries@suse.de>

        * lib/dtrace.exp (dtrace_build_usdt_test_program): Use quiet as
        gdb_compile option.

2020-02-18  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/printcmds.exp (test_print_enums): Update expected
        output.

2020-02-18  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/printcmds.exp (test_print_enums): Expect hex values
        for "unknown".

2020-02-18  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/printcmds.c (enum flag_enum): Add FE_TWO_LEGACY
        enumerator.

2020-02-18  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/printcmds.c (enum flag_enum): Prefix enumerators with
        FE_, add FE_NONE.
        (three): Update.
        (enum flag_enum_without_zero): New enum.
        (flag_enum_without_zero): New variable.
        (enum not_flag_enum): New enum.
        (three_not_flag): New variable.
        * gdb.base/printcmds.exp (test_artificial_arrays): Update.
        (test_print_enums): Add more tests for printing flag enums.

2020-02-18  Tom de Vries  <tdevries@suse.de>

        * lib/ada.exp (gdb_compile_ada_1): Factor out of ...
        (gdb_compile_ada): ... here.
        (gnat_runtime_has_debug_info): Remove fail call for gdb_compile_ada
        failure.  Use gdb_compile_ada_1 instead of gdb_compile_ada.

2020-02-14  Tom Tromey  <tom@tromey.com>

        * lib/gdbserver-support.exp (find_gdbserver): Find gdbserver in
        build directory.
        * boards/gdbserver-base.exp: Update path to gdbserver.

2020-02-13  Tom de Vries  <tdevries@suse.de>

        * lib/ada.exp (gdb_compile_ada): Delete stale exec before compilation.

2020-02-13  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/catch_ex_std.exp: Indicate unsupported if gnatbind/gnatlink
        are missing.

2020-02-13  Tom de Vries  <tdevries@suse.de>

        * lib/ada.exp (gnatmake_version_at_least): Wrap exec call in a catch
        call.

2020-02-11  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR tui/25126
        https://bugzilla.redhat.com/show_bug.cgi?id=1784210
        * gdb.base/cached-source-file.c: New file.
        * gdb.base/cached-source-file.exp: New file.

2020-02-11  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25488
        * lib/gdb.exp (gdb_init): Unset $file_last_loaded.

2020-02-10  Tom de Vries  <tdevries@suse.de>

        * gdb.multi/multi-target.exp: Skip if skip_gdbserver_tests.

2020-02-10  Maciej W. Rozycki  <macro@wdc.com>

        * gdb.base/step-over-no-symbols.exp: Verify that $before_addr
        and $after_addr are both integers before making a comparison.

2020-02-09  Tom de Vries  <tdevries@suse.de>

        * gdb.base/many-headers.exp: Echo gdb command to gdb.log.  Capture gdb
        command output and paste it into gdb.log.  If any, paste catch message
        to gdb.log.

2020-02-07  Tom Tromey  <tromey@adacore.com>

        PR breakpoints/24915:
        * gdb.base/annotate-symlink.exp: Use setup_xfail.

2020-02-06  Shahab Vahedi  <shahab@synopsys.com>

        * gdb.tui/tui-missing-src.exp: Add the "missing source
        file" test for the TUI.

2020-02-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.server/multi-ui-errors.exp: Give a test a real name to avoid
        including a port number in the output.

2020-02-04  Alok Kumar Sharma  <alokkumar.sharma@amd.com>

        * lib/fortran.exp (fortran_int4): Handle clang.
        (fortran_int8): Likewise.
        (fortran_real4): Likewise.
        (fortran_real8): Likewise.
        (fortran_complex4): Likewise.
        (fortran_logical4): Likewise.
        (fortran_character1): Likewise.

2020-02-04  Tom de Vries  <tdevries@suse.de>

        * README (Race detection): Add note.

2020-02-04  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (inferior_exited_re): Use "\[^\n\r\]*" instead of ".*".

2020-02-04  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (inferior_exited_re): Use non-capturing parentheses.

2020-02-03  Rogerio A. Cardoso  <rcardoso@linux.ibm.com>

        * gdb.arch/powerpc-power8.exp: Delete trailing whitespace of
        tbegin., tend. instructions. Replace bctar-, bctar+, bctarl-,
        bctarl+ extended mnemonics when avaliable by bgttar, bnstarl,
        blttar, bnetarl.
        * gdb.arch/powerpc-power8.s: Fix comments. Fix instructions
        binary for blttar, bnetarl.
        * gdb.arch/powerpc-power9.exp: Delete trailing whitespace of
        wait instruction. Delete ldmx test.
        * gdb.arch/powerpc-power9.s: Delete ldmx instruction.

2020-02-03  Alok Kumar Sharma  <AlokKumar.Sharma@amd.com>

        * gdb.fortran/array-bounds-high.exp: New file.
        * gdb.fortran/array-bounds-high.f90: New file.

2020-02-03  Lukas Durfina  <ldurfina@tachyum.com>  (tiny change)

        * gdb.base/fileio.c: Remove #include of <sys/errno.h>.
        Replace #include of <sys/fcntl.h> by <fcntl.h>.

2020-02-01  Tom de Vries  <tdevries@suse.de>

        * gdb.server/server-kill-python.exp: Fix $gdb_tst_name typo.

2020-01-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR tui/9765
        * gdb.tui/tui-layout-asm-short-prog.S: New file.
        * gdb.tui/tui-layout-asm-short-prog.exp: New file.

2020-01-29  Luis Machado  <luis.machado@linaro.org>

        * gdb.arch/aarch64-brk-patterns.c: New source file.
        * gdb.arch/aarch64-brk-patterns.exp: New test.

2020-01-29  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.cp/pass-by-ref-2.exp: Mark some tests as XFAIL based on the
        GCC/Clang version.
        * gdb.cp/pass-by-ref.exp: Ditto.

2020-01-29  Tom de Vries  <tdevries@suse.de>

        * gdb.threads/watchpoint-fork-child.c: Guard prints with #if DEBUG.
        * gdb.threads/watchpoint-fork-mt.c: Same.
        * gdb.threads/watchpoint-fork-parent.c: Same.
        * gdb.threads/watchpoint-fork-st.c: Same.
        * gdb.threads/watchpoint-fork.exp: Compile with DEBUG=0.

2020-01-27  Luis Machado  <luis.machado@linaro.org>

        * gdb.base/step-over-syscall.exp (setup): Check if we're already
        sitting at a syscall instruction when we hit the syscall function's
        breakpoint.
        Check PC against one obtained with the x command.
        Validate syscall number.
        (step_over_syscall): Don't continue to the syscall instruction if
        we're already there.

2020-01-25  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/attach.exp: Test 'set exec-file-mismatch'.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-inline-many-frames.c: New file.
        * gdb.dwarf2/dw2-inline-many-frames.exp: New file.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-inline-stepping.c: New file.
        * gdb.dwarf2/dw2-inline-stepping.exp: New file.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Update line table parsing test.
        * gdb.dwarf2/dw2-ranges-base.exp: Add new line table parsing test.

2020-01-24  Pedro Alves  <palves@redhat.com>

        PR gdb/25410
        * gdb.multi/multi-re-run-1.c: New.
        * gdb.multi/multi-re-run-2.c: New.
        * gdb.multi/multi-re-run.exp: New.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/23718
        * gdb.server/server-kill-python.exp: New file.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.server/multi-ui-errors.c: New file.
        * gdb.server/multi-ui-errors.exp: New file.

2020-01-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR tui/9765
        * gdb.tui/tui-layout-asm.exp: Add scrolling test for asm window.

2020-01-19  Tom Tromey  <tom@tromey.com>

        * gdb.tui/main.exp: Add check for plain "file".

2020-01-16  Christian Biesinger  <cbiesinger@google.com>

        * lib/gdb.exp: Fix spelling error (seperatelly).

2020-01-14  Tom Tromey  <tom@tromey.com>

        PR symtab/12535:
        * gdb.python/python.exp: Test decode_line with empty string
        argument.

2020-01-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.base/skip-inline.exp: Extend test.

2020-01-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-bad-elf-other.S: New file.
        * gdb.dwarf2/dw2-bad-elf.c: New file.
        * gdb.dwarf2/dw2-bad-elf.exp: New file.

2020-01-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/dwarf.exp (Dwarf::lines): Reset _line_saw_program and
        _line_saw_file.

2020-01-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/tuiterm.exp (Term::_check_box): Check some parts of the top
        border.

2020-01-10  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.multi/multi-target.exp (setup): Factor out "info
        connections" and "info inferiors" tests to ...
        (test_info_inferiors): ... this new procedure.
        (top level): Run new "info-inferiors" tests.

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.server/bkpt-other-inferior.exp: New file.

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/kill-detach-inferiors-cmd.exp: Adjust expected output
        of "add-inferior".
        * gdb.base/quit-live.exp: Likewise.
        * gdb.base/remote-exec-file.exp: Likewise.
        * gdb.guile/scm-progspace.exp: Likewise.
        * gdb.linespec/linespec.exp: Likewise.
        * gdb.mi/new-ui-mi-sync.exp: Likewise.
        * gdb.mi/user-selected-context-sync.exp: Likewise.
        * gdb.multi/multi-target.exp (setup): Add "info connection" and
        "info inferiors" tests.
        * gdb.multi/remove-inferiors.exp: Adjust expected output of
        "add-inferior".
        * gdb.multi/watchpoint-multi.exp: Likewise.
        * gdb.python/py-inferior.exp: Likewise.
        * gdb.server/extended-remote-restart.exp: Likewise.
        * gdb.threads/fork-plus-threads.exp: Adjust expected output of
        "info inferiors".
        * gdb.threads/forking-threads-plus-breakpoint.exp: Likewise.
        * gdb.trace/report.exp: Likewise.

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-target.c: New file.
        * gdb.multi/multi-target.exp: New file.
        * lib/gdbserver-support.exp (gdb_target_cmd): Handle "Non-stop
        mode requested, but remote does not support non-stop".

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.server/extended-remote-restart.exp (test_reload): Explicitly
        disconnect before reconnecting.

2020-01-10  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.server/connect-without-multi-process.exp: Also test
        continuing to end.

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/remote-exec-file.exp: New file.

2020-01-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/fork-running-state.exp (do_test): Adjust expected
        output.
        * gdb.threads/async.c: New.
        * gdb.threads/async.exp: New.
        * gdb.multi/tids-gid-reset.c: New.
        * gdb.multi/tids-gid-reset.exp: New.

2020-01-10  George Barrett  <bob@bob131.so>

        * gdb.base/stap-probe.c (relocation_marker): Add dummy variable
        to help in finding the image relocation offset.
        * gdb.base/stap-probe.exp (stap_test): Accept arbitrary compile
        options in arguments.
        (stap_test_no_debuginfo): Likewise.
        (stap-probe-nosem-noopt-pie, stap-probe-nosem-noopt-nopie): Add
        test variants.
        (stap_test): Add null semaphore relocation test.

2020-01-10  George Barrett  <bob@bob131.so>

        * gdb.base/stap-probe.c: Rename USE_PROBES to USE_SEMAPHORES.
        * gdb.base/stap-probe.exp: Likewise.
        (stap_test): Pass argument as an additional flag.
        (stap_test_no_debuginfo): Likewise.
        (stap_test): Check `info probes stap' output for semaphore
        addresses if the test binary is supposed to have them.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.tui/basic.exp: Add more scrolling tests.

2020-01-09  Tom Tromey  <tom@tromey.com>

        PR tui/18932:
        * lib/tuiterm.exp (Term::wait_for): Rename from _accept.  Return a
        meangingful value.
        (Term::command, Term::resize): Update.
        * gdb.tui/basic.exp: Add scrolling test.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.tui/tui-layout-asm.exp: New file.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/tuiterm.exp (Term::check_box_contents): New proc.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/tuiterm.exp (Term::prepare_for_tui): New proc.
        (Term::enter_tui): Use Term::prepare_for_tui.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/tuiterm.exp (Term::dump_screen): Always dump the screen when
        called.

2020-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/skip.exp: Fix race condition in test.

2020-01-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/backtrace.c: New file.
        * gdb.base/backtrace.exp: New file.

2020-01-05  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.tui/list.exp: Test 'focus next' after 'list main'.

2020-01-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/style.exp: Test that warnings are styled.

2019-12-29  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.base/line65535.exp: New file.
        * gdb.base/line65535.c: New file.

2019-12-27  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/ada.exp (gnat_runtime_has_debug_info): New proc.
        * lib/gnat_debug_info_test.adb: New file.
        * gdb.ada/ptype_tagged_param.exp: Use
        gnat_runtime_has_debug_info, expect a different output if
        runtime does not have debug info.

2019-12-20  Simon Marchi  <simon.marchi@efficios.com>

        * lib/sym-info-cmds.exp (GDBInfoSymbols::check_no_entry): Add
        (another) quote in test name.

2019-12-20  Simon Marchi  <simon.marchi@efficios.com>

        * lib/sym-info-cmds.exp (GDBInfoModuleSymbols::check_no_entry):
        Add quote in test name.

2019-12-20  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.cp/pass-by-ref.cc: Delete.  Generated in the output
        directory instead.
        * gdb.cp/pass-by-ref.exp: Extend with more cases.
        * gdb.cp/pass-by-ref-2.cc: New file.
        * gdb.cp/pass-by-ref-2.exp: New file.

2019-12-20  Tom Tromey  <tom@tromey.com>

        * gdb.tui/list-before.exp: New file.

2019-12-20  Tom Tromey  <tom@tromey.com>

        * gdb.tui/list.exp: Check for source on initial listing.

2019-12-11  Tom Tromey  <tromey@adacore.com>

        * gdb.xml/tdesc-arch.exp (set_arch): Add "trans_mode" parameter.
        Add crlf test.

2019-12-18  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/default.exp: Update value of $_gdb_major.

2019-12-17  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.base/skip.exp: Fix test failure observed with gcc-9.2.0.

2019-12-17  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.base/skip.exp: Whitespace fix.

2019-12-16  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        * gdb.base/skip-inline.c: New file.
        * gdb.base/skip-inline.exp: New file.

2019-12-16  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/jit-reader.exp (jit_reader_test): Rename
        jit_function_00 to jit_function_stack_mangle.
        * gdb.base/jithost.c (jit_function_t): Rename to...
        (jit_function_stack_mangle_t): ... this.
        (jit_function_add_t): New typedef.
        (jit_function_00_code): Rename to...
        (jit_function_stack_mangle_code): ... this, make static.
        (jit_function_add_code): New.
        (main): Generate "add" function and call it.  Adjust to changes
        in jithost_abi.
        * gdb.base/jithost.h (struct jithost_abi_bounds): New.
        (struct jithost_abi) <begin, end>: Remove fields.
        <object, function_stack_mangle, function_add>: New fields.
        * gdb.base/jitreader.c (struct reader_state) <code_begin,
        code_end>: Remove fields.
        <func_stack_mangle>: New field.
        (read_debug_info): Adjust to renaming, create block for "add"
        function.
        (read_sp, unwind_frame, get_frame_id): Adjust to other changes.

2019-12-11  Tom Tromey  <tom@tromey.com>

        * gdb.tui/resize.exp: Fix regexp.
        * gdb.tui/regs.exp: Fix regexps.
        * gdb.tui/main.exp: Fix regexp.

2019-12-11  Tom Tromey  <tom@tromey.com>

        * gdb.tui/resize.exp: Update.
        * gdb.tui/empty.exp (layouts): Update.

2019-12-11  Tom Tromey  <tom@tromey.com>

        * gdb.tui/regs.exp: Update.
        * gdb.tui/empty.exp (layouts): Update.
        * gdb.tui/basic.exp: Update.
        * lib/tuiterm.exp (_check_box): Don't check bottom border.

2019-12-11  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/options.exp: Add -raw-values in the print completion list.
        * gdb.python/py-prettyprint.exp: Add tests for -raw-values.

2019-12-10  Kevin Buettner  <kevinb@redhat.com>

        * gdb.threads/omp-par-scope.c: New file.
        * gdb/threads/omp-par-scope.exp: New file.

2019-12-10  Kevin Buettner  <kevinb@redhat.com>

        * lib/gdb.exp (support_nested_function_tests): New proc.

2019-12-10  Kevin Buettner  <kevinb@redhat.com>

        * lib/gdb.exp (gdb_compile_openmp): New proc.
        (build_executable_from_specs): Add an "openmp" option.
        (gdb_compile_pthreads): Add non-executable case.

2019-12-10  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/unchecked_union.exp: New file.
        * gdb.ada/unchecked_union/pck.adb: New file.
        * gdb.ada/unchecked_union/pck.ads: New file.
        * gdb.ada/unchecked_union/unchecked_union.adb: New file.
        * gdb-utils.exp (string_to_regexp): Also quote "?".

2019-12-10  George Barrett  <bob@bob131.so>

        Test scripted probe breakpoints.
        * gdb.guile/scm-breakpoint.c (main): Add probe point.
        * gdb.python/py-breakpoint.c (main): Likewise.
        * gdb.guile/scm-breakpoint.exp (test_bkpt_probe): Add probe
        specifier test.
        * gdb.python/py-breakpoint.exp (test_bkpt_probe): Likewise.

2019-12-09  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.cp/rvalue-ref-overload.cc (g): New function that takes
        an rvalue parameter.
        * gdb.cp/rvalue-ref-overload.exp: Test calling it with an lvalue
        parameter.

2019-12-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-fortran-modules.exp: Add patterns to skip system
        modules.

2019-12-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/derived-type-striding.exp: KFAIL if we are using a
        broken version of GCC.

2019-12-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-modules.exp: Rewrite to make use of new
        sym-info-cmds library.
        * gdb.fortran/info-types.exp: Likewise.
        * lib/sym-info-cmds.exp: New file.

2019-12-08  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/imported-unit.exp: Fix inter-CU references.

2019-12-07  Keith Seitz  <keiths@redhat.com>

        * gdb.base/corefile-buildid-shlib-shr.c: New file.
        * gdb.base/corefile-buildid-shlib.c: New file.
        * gdb.base/corefile-buildid.c: New file.
        * gdb.base/corefile-buildid.exp: New file.

2019-12-06  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/varval.exp: Add decl before def test.

2019-12-06  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.cp/rvalue-ref-overload.exp: Minor cleanup.

2019-12-06  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

        * gdb.cp/rvalue-ref-overload.cc: Add a case that involves both
        CV and reference conversion for overload resolution.
        * gdb.cp/rvalue-ref-overload.exp: Test it.

2019-12-06  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.threads/pthreads.exp: Test taas and tfaas without command.
        * gdb.base/frameapply.exp: Test faas without command.

2019-12-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp (gdb_compile): Add -J compiler option when building
        Fortran tests.
        * gdb.mi/mi-fortran-modules.exp: Compile source files in correct
        order.

2019-12-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/type-kinds.exp (test_cast_1_to_type_kind): Handle
        casting to type with no kind specified.
        (test_basic_parsing_of_type_kinds): Additional tests for types
        with no kind specified, and add tests for single/double
        precision/complex types.

2019-12-04  Tom Tromey  <tromey@adacore.com>

        * gdb.base/endianity.c (struct other) <x>: New field.
        (main): Initialize it.
        * gdb.base/endianity.exp: Update.

2019-12-04  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/scalar_storage/storage.adb: New file.
        * gdb.ada/scalar_storage/pck.adb: New file.
        * gdb.ada/scalar_storage/pck.ads: New file.
        * gdb.ada/scalar_storage.exp: New file.

2019-12-04  Tom Tromey  <tromey@adacore.com>

        * gdb.base/endianity.c (struct otherendian) <f>: New field.
        (main): Initialize it.
        * gdb.base/endianity.exp: Update.

2019-12-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-sym-info.exp: Add tests for -max-results parameter.

2019-12-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-fortran-modules.exp: Add additional tests for
        -symbol-info-module-functions and -symbol-info-module-variables.

2019-12-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/array-slices.exp: Add test for dynamic strings.

2019-12-01  Richard Bunt  <richard.bunt@arm.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/derived-type-striding.exp: New file.
        * gdb.fortran/derived-type-striding.f90: New file.
        * gdb.fortran/array-slices.exp: New file.
        * gdb.fortran/array-slices.f90: New file.

2019-11-30  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/define.exp: Test . in command names.
        * gdb.base/setshow.exp: Update test, as . is now part of
        command name.

2019-11-30  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/define-prefix.exp: New file.

2019-11-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp (skip_btrace_tests): Return 1 if the test fails to
        compile.
        (skip_btrace_pt_tests): Likewise.

2019-11-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-modules.exp: Compile source files in correct
        order.

2019-11-27  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/imported-unit.exp: New file.
        * gdb.dwarf2/imported-unit.c: New file.

2019-11-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-fortran-modules-2.f90: New file.
        * gdb.mi/mi-fortran-modules.exp: New file.
        * gdb.mi/mi-fortran-modules.f90: New file.

2019-11-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-sym-info-1.c: New file.
        * gdb.mi/mi-sym-info-2.c: New file.
        * gdb.mi/mi-sym-info.exp: New file.

2019-11-22  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/tasks.exp: Add -ada-task-info regression test.
        * gdb.ada/tasks/foo.adb: Add another stopping location.

2019-11-21  Peeter Joot  <peeter.joot@lzlabs.com>

        * gdb.base/endianity.c: New test.
        * gdb.base/endianity.exp: New file.

2019-11-21  Lukas Durfina  <ldurfina@tachyum.com>

        * gdb.arch/amd64-eval.exp: Skip test if target is not x86-64.

2019-11-21  Tom de Vries  <tdevries@suse.de>

        PR gdb/24956
        * gdb.base/ui-redirect.exp: Test output of user-defined command.

2019-11-20  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.python/py-progspace.exp: Add missing parentheses on some
        'print' commands.

2019-11-19  Tom Tromey  <tom@tromey.com>

        * gdb.tui/winheight.exp: New file.

2019-11-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/ctf-whatis.c: Delete.
        * gdb.base/ctf-whatis.exp: Delete.
        * gdb.base/whatis.exp: Rewrite to compile as both dwarf and ctf.

2019-11-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/ctf-cvexpr.exp: Delete.
        * gdb.base/cvexpr.exp: Rewrite to compile as both dwarf and ctf.

2019-11-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/ctf-constvars.exp: Skip test if CTF is not supported in
        the compiler.  Clean up header comment a little.
        * gdb.base/ctf-ptype.exp: Likewise.
        * gdb.base/ctf-whatis.exp: Likewise.
        * lib/gdb.exp (skip_ctf_tests): New proc.

2019-11-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        https://bugzilla.redhat.com/show_bug.cgi?id=1765117
        * gdb.tui/corefile-run.exp: New file.

2019-11-14  Tom Tromey  <tromey@adacore.com>

        * gdb.base/gdbvars.exp (test_convenience_variables): Add
        regression tests.

2019-11-12  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp (_accept): Add wait_for parameter.  Check output
        after any command.  Expect prompt after WAIT_FOR is seen.
        (enter_tui): Enable resize messages.
        (command): Expect command in output.
        (get_line): Avoid error when cursor appears to be off-screen.
        (dump_screen): Include screen size in title.
        (_do_resize): New proc, from "resize".
        (resize): Rewrite.  Do resize in two steps.
        * gdb.tui/empty.exp (layouts): Fix entries.
        (check_boxes): Remove xfail.
        (check_text): Dump screen on failure.

2019-11-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-symbol.exp: Add test for
        gdb.lookup_static_symbols.

2019-11-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-symbol.c: Declare and call function from new
        py-symbol-2.c file.
        * gdb.python/py-symbol.exp: Compile both source files, and add new
        tests for gdb.lookup_static_symbol.
        * gdb.python/py-symbol-2.c: New file.

2019-11-02  Tom de Vries  <tdevries@suse.de>

        * gdb.base/advance.exp: Drop superfluous 3rd argument to gdb_test.
        * gdb.base/anon.exp: Same.
        * gdb.base/auto-connect-native-target.exp: Same.
        * gdb.base/call-ar-st.exp: Same.
        * gdb.base/catch-syscall.exp: Same.
        * gdb.base/commands.exp: Same.
        * gdb.base/default.exp: Same.
        * gdb.base/display.exp: Same.
        * gdb.base/float.exp: Same.
        * gdb.base/foll-fork.exp: Same.
        * gdb.base/help.exp: Same.
        * gdb.base/info-macros.exp: Same.
        * gdb.base/info-proc.exp: Same.
        * gdb.base/info-target.exp: Same.
        * gdb.base/long_long.exp: Same.
        * gdb.base/macscp.exp: Same.
        * gdb.base/memattr.exp: Same.
        * gdb.base/nofield.exp: Same.
        * gdb.base/pointers.exp: Same.
        * gdb.base/printcmds.exp: Same.
        * gdb.base/ptype.exp: Same.
        * gdb.base/restore.exp: Same.
        * gdb.base/return.exp: Same.
        * gdb.base/scope.exp: Same.
        * gdb.base/set-noassign.exp: Same.
        * gdb.base/setshow.exp: Same.
        * gdb.base/shlib-call.exp: Same.
        * gdb.base/signals.exp: Same.
        * gdb.base/sigstep.exp: Same.
        * gdb.base/skip.exp: Same.
        * gdb.base/solib-symbol.exp: Same.
        * gdb.base/stap-probe.exp: Same.
        * gdb.base/step-line.exp: Same.
        * gdb.base/step-test.exp: Same.
        * gdb.base/style.exp: Same.
        * gdb.base/varargs.exp: Same.
        * gdb.base/vla-datatypes.exp: Same.
        * gdb.base/vla-ptr.exp: Same.
        * gdb.base/vla-sideeffect.exp: Same.
        * gdb.base/volatile.exp: Same.
        * gdb.base/watch-cond-infcall.exp: Same.
        * gdb.base/watchpoint.exp: Same.

2019-11-02  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/anon-union.exp: Drop superfluous 3rd argument to gdb_test.
        * gdb.cp/cpexprs.exp: Same.
        * gdb.cp/except-multi-location.exp: Same.
        * gdb.cp/exceptprint.exp: Same.
        * gdb.cp/gdb2384.exp: Same.
        * gdb.cp/inherit.exp: Same.
        * gdb.cp/m-static.exp: Same.
        * gdb.cp/meth-typedefs.exp: Same.
        * gdb.cp/misc.exp: Same.
        * gdb.cp/namespace.exp: Same.
        * gdb.cp/non-trivial-retval.exp: Same.
        * gdb.cp/overload.exp: Same.
        * gdb.cp/pr17132.exp: Same.
        * gdb.cp/re-set-overloaded.exp: Same.
        * gdb.cp/rvalue-ref-types.exp: Same.
        * gdb.cp/templates.exp: Same.

2019-11-01  Luis Machado  <luis.machado@linaro.org>

        PR gdb/25124

        * gdb.arch/pr25124.S: New file.
        * gdb.arch/pr25124.exp: New file.

2019-10-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-modules.exp: Update expected results, and add
        additional tests for 'info module functinos', and 'info module
        variables'.
        * gdb.fortran/info-types.exp: Update expected results.
        * gdb.fortran/info-types.f90: Extend testcase with additional
        module variables and functions.

2019-10-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-modules.exp: New file.
        * gdb.fortran/info-types.exp: Build with new file.
        * gdb.fortran/info-types.f90: Include and use new module.
        * gdb.fortran/info-types-2.f90: New file.

2019-10-31  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/setshow.exp: Test $_gdb_setting and $_gdb_setting_str.
        * gdb.base/settings.exp: Test all settings types using
        $_gdb_maint_setting and $_gdb_maint_setting_str in proc_show_setting,
        that now verifies that the value of "maint show" is the same as
        returned by the settings functions.  Test the type of the
        maintenance settings.
        * gdb.base/default.exp: Update show_conv_list.

2019-10-31  Tom de Vries  <tdevries@suse.de>

        * gdb.arch/amd64-disp-step-avx.exp: Drop superfluous 3rd argument to
        gdb_test.
        * gdb.arch/amd64-disp-step.exp: Same.
        * gdb.asm/asm-source.exp: Same.
        * gdb.btrace/buffer-size.exp: Same.
        * gdb.btrace/cpu.exp: Same.
        * gdb.btrace/enable.exp: Same.
        * gdb.dwarf2/count.exp: Same.
        * gdb.dwarf2/dw2-ranges-func.exp: Same.
        * gdb.dwarf2/dw2-ranges-psym.exp: Same.
        * gdb.fortran/vla-datatypes.exp: Same.
        * gdb.fortran/vla-history.exp: Same.
        * gdb.fortran/vla-ptype.exp: Same.
        * gdb.fortran/vla-value.exp: Same.
        * gdb.fortran/whatis_type.exp: Same.
        * gdb.guile/guile.exp: Same.
        * gdb.multi/tids.exp: Same.
        * gdb.python/py-finish-breakpoint.exp: Same.
        * gdb.python/py-framefilter.exp: Same.
        * gdb.python/py-pp-registration.exp: Same.
        * gdb.python/py-xmethods.exp: Same.
        * gdb.python/python.exp: Same.
        * gdb.server/connect-with-no-symbol-file.exp: Same.
        * gdb.server/no-thread-db.exp: Same.
        * gdb.server/run-without-local-binary.exp: Same.
        * gdb.stabs/weird.exp: Same.
        * gdb.threads/attach-many-short-lived-threads.exp: Same.
        * gdb.threads/thread-find.exp: Same.
        * gdb.threads/tls-shared.exp: Same.
        * gdb.threads/tls.exp: Same.
        * gdb.threads/wp-replication.exp: Same.
        * gdb.trace/ax.exp: Same.
        * lib/gdb.exp (gdb_test_exact, help_test_raw): Same.

2019-10-31  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/array_bounds.exp: Drop superfluous 3rd argument to gdb_test.
        * gdb.ada/array_subscript_addr.exp: Same.
        * gdb.ada/arrayidx.exp: Same.
        * gdb.ada/arrayparam.exp: Same.
        * gdb.ada/arrayptr.exp: Same.
        * gdb.ada/boolean_expr.exp: Same.
        * gdb.ada/call_pn.exp: Same.
        * gdb.ada/complete.exp: Same.
        * gdb.ada/fixed_cmp.exp: Same.
        * gdb.ada/fun_addr.exp: Same.
        * gdb.ada/funcall_param.exp: Same.
        * gdb.ada/interface.exp: Same.
        * gdb.ada/mod_from_name.exp: Same.
        * gdb.ada/null_array.exp: Same.
        * gdb.ada/packed_array.exp: Same.
        * gdb.ada/packed_tagged.exp: Same.
        * gdb.ada/print_chars.exp: Same.
        * gdb.ada/print_pc.exp: Same.
        * gdb.ada/ptype_arith_binop.exp: Same.
        * gdb.ada/ptype_field.exp: Same.
        * gdb.ada/ptype_tagged_param.exp: Same.
        * gdb.ada/rec_return.exp: Same.
        * gdb.ada/ref_tick_size.exp: Same.
        * gdb.ada/str_ref_cmp.exp: Same.
        * gdb.ada/taft_type.exp: Same.
        * gdb.ada/tagged.exp: Same.
        * gdb.ada/type_coercion.exp: Same.
        * gdb.ada/uninitialized_vars.exp: Same.

2019-10-30  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_test_multiple): Handle -early pattern flag.

2019-10-26  Tom de Vries  <tdevries@suse.de>

        * gdb.base/bigcore.c: Fix typos in comments.
        * gdb.base/ctf-ptype.c: Same.
        * gdb.base/long_long.c: Same.
        * gdb.dwarf2/dw2-op-out-param.S: Same.
        * gdb.python/py-evthreads.c: Same.
        * gdb.reverse/i387-stack-reverse.c: Same.
        * gdb.trace/tfile.c: Same.
        * lib/compiler.c: Same.
        * lib/compiler.cc: Same.

2019-10-25  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/sigall-precsave.exp: Use -wrap and $gdb_test_name in
        gdb_test_multiple calls.
        * gdb.reverse/sigall-reverse.exp: Same.
        * gdb.reverse/solib-precsave.exp: Same.
        * gdb.reverse/solib-reverse.exp: Same.
        * gdb.reverse/until-precsave.exp: Same.
        * gdb.reverse/until-reverse.exp: Same.

2019-10-24  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_test_multiple): Add -wrap pattern flag.
        * gdb.reverse/step-precsave.exp: Rewrite gdb_test_multiple containing
        kfail using -wrap pattern flag and convenience variable
        gdb_test_name.

2019-10-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-progspace.exp: Add tests for the
        Progspace.block_for_pc method.

2019-10-23  Tom Tromey  <tom@tromey.com>

        * configure: Rebuild.
        * aclocal.m4: Use m4_include, not sinclude.

2019-10-21  Tom de Vries  <tdevries@suse.de>

        * gdb.base/infcall-nested-structs.c: Add
        __attribute__((noinline,noclone)) to all functions.
        (call_all): Add missing variable initialization.  Simplify return value.
        (breakpt): Increment volatile variable, to prevent call from being
        optimized out.
        * gdb.base/infcall-nested-structs.exp: Compile with -O2.

2019-10-17  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/module.exp: Allow info variables to print info for files
        other than module.f90.

2019-10-16  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/module.exp: Extend with 'info variables' test.

2019-10-16  Andrew Burgess  <andrew.burgess@embecosm.com>

        * boards/cc-with-tweaks.exp: Setup F90_FOR_TARGET and
        F77_FOR_TARGET.

2019-10-16  Tom de Vries  <tdevries@suse.de>

        PR tdep/25096
        * gdb.base/infcall-nested-structs.exp: Remove PR25096 KFAILs.

2019-10-16  Tom de Vries  <tdevries@suse.de>

        PR tdep/24104
        * gdb.base/infcall-nested-structs.exp: Remove XFAIL for PR tdep/24104.
        Add KFAIL for PR tdep/25096.

2019-10-16  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25059
        * gdb.cp/local-static.exp (do_test): Add xfails for gcc PR debug/55541.

2019-10-16  Tom de Vries  <tdevries@suse.de>

        * gdb.base/jit-reader.exp: Allow non-pointer registers to be printed
        as signed.

2019-10-14  Simon Marchi <simon.marchi@polymtl.ca>

        * gdb.mi/list-thread-groups-available.exp: Read entries one by
        one instead of increasing timeout.

2019-10-13  Tom de Vries  <tdevries@suse.de>

        PR record/25038
        * gdb.reverse/sigall-precsave.exp: Add PR record/25038 KFAIL.
        * gdb.reverse/sigall-reverse.exp: Same.
        * gdb.reverse/solib-precsave.exp: Same.
        * gdb.reverse/solib-reverse.exp: Same.
        * gdb.reverse/step-precsave.exp: Same.
        * gdb.reverse/until-precsave.exp: Same.
        * gdb.reverse/until-reverse.exp: Same.
        * lib/gdb.exp (gdb_continue_to_breakpoint): Same.

2019-10-10  Andreas Arnez  <arnez@linux.ibm.com>

        * gdb.base/infcall-nested-structs.c (cmp_struct_02_01)
        (cmp_struct_02_02, cmp_struct_04_01, cmp_struct_04_02)
        (cmp_struct_05_01, cmp_struct_static_02_01)
        (cmp_struct_static_04_01, cmp_struct_static_06_01): Fix redundant
        comparisons.

2019-10-10  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24888
        * lib/ada.exp (target_compile_ada_from_dir): Route -pie/-no-pie to
        gnatlink.

2019-10-09  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25048
        * gdb.rust/simple.exp: Add xfails for incorrect DWARF.

2019-10-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.ada/catch_ex_std.exp: Handle being unabled to catch Ada
        exceptions due to missing debug information.

2019-10-07  Tom de Vries  <tdevries@suse.de>

        * gdb.base/default.exp: Expect _gdb_major/_gdb_minor to be 9.1.

2019-10-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp (gdb_test_multiple): Add gdb_test_name mechanism.
        * gdb.base/annota1.exp: Update to use gdb_test_name.

2019-10-07  Weimin Pan  <weimin.pan@oracle.com>

        * gdb.base/ctf-whatis.exp: New file.
        * gdb.base/ctf-whatis.c: New file.
        * gdb.base/ctf-ptype.exp: New file.
        * gdb.base/ctf-ptype.c: New file.
        * gdb.base/ctf-constvars.exp: New file.
        * gdb.base/ctf-constvars.c: New file.
        * gdb.base/ctf-cvexpr.exp: New file.

2019-10-04  Tom de Vries  <tdevries@suse.de>

        * gdb.cp/local-static.c (main): Move declaration of int i out of the
        for loop.

2019-10-03  Tom Tromey  <tom@tromey.com>

        PR rust/24976:
        * gdb.rust/simple.rs (Union2): New type.
        (main): Use Union2.
        * gdb.rust/simple.exp: Add test.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/nested-funcs-2.exp: Run tests with and without the
        nested function prefix.

2019-10-03  Bernhard Heckel  <bernhard.heckel@intel.com>
            Richard Bunt  <richard.bunt@arm.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/nested-funcs.exp: Tests for placing breakpoints on
        nested functions.
        * gdb.fortran/nested-funcs.f90: Update expected results.
        * gdb.fortran/nested-funcs-2.exp: New file.
        * gdb.fortran/nested-funcs-2.f90: New file.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-parameter.exp: Make test names unique.
        * gdb.python/py-template.exp: Likewise.
        * gdb.python/py-value.exp: Likewise.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/break-interp.exp: Reduce test name duplication.
        * gdb.base/call-sc.exp: Likewise.
        * gdb.base/callfuncs.exp: Likewise.
        * gdb.base/charset.exp: Likewise.
        * gdb.base/dump.exp: Likewise.
        * gdb.base/ena-dis-br.exp: Likewise.
        * gdb.base/relational.exp: Likewise.
        * gdb.base/step-over-syscall.exp: Likewise.
        * gdb.base/structs.exp: Likewise.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.linespec/explicit.exp: Make test names unique.
        * gdb.linespec/ls-errs.exp: Likewise.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.reverse/break-precsave.exp: Make test names unique.
        * gdb.reverse/break-reverse.exp: Likewise.
        * gdb.reverse/finish-precsave.exp: Likewise.
        * gdb.reverse/finish-reverse.exp: Likewise.
        * gdb.reverse/machinestate-precsave.exp: Likewise.
        * gdb.reverse/machinestate.exp: Likewise.
        * gdb.reverse/readv-reverse.exp: Likewise.
        * gdb.reverse/recvmsg-reverse.exp: Likewise.
        * gdb.reverse/sigall-precsave.exp: Likewise.
        * gdb.reverse/sigall-reverse.exp: Likewise.
        * gdb.reverse/step-indirect-call-thunk.exp: Likewise.
        * gdb.reverse/watch-precsave.exp: Likewise.
        * gdb.reverse/watch-reverse.exp: Likewise.

2019-10-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.threads/stop-with-handle.c: New file.
        * gdb.threads/stop-with-handle.exp: New file.

2019-10-03  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25059
        * gdb.base/list-missing-source.exp: Allowing the "Compilation
        directory" line to be missing.

2019-10-03  Tom de Vries  <tdevries@suse.de>

        PR testsuite/25059
        * gdb.base/info-types.exp: Make the presence of the 'unsigned int'
        type optional.

2019-10-02  Andreas Arnez  <arnez@linux.ibm.com>

        * gdb.python/py-format-string.c (string.h): New include.
        (main): Fill a_struct_with_union.the_union.an_int with bytes of
        the same value, for endianness-independence.
        * gdb.python/py-format-string.exp (default_regexp_dict)
        (test_pretty_structs, test_format): Adjust expected output to the
        changed initialization.

2019-10-02  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/catch_ex_std.exp: Add $_ada_exception test.

2019-10-02  Pedro Alves  <palves@redhat.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/print-file-var-lib1.c: Include <stdio.h> and
        "print-file-var.h".
        (this_version_id) Use ATTRIBUTE_VISIBILITY.
        (get_version_1): Print this_version_id and its address.
        Add extern "C" wrappers around interface functions.
        * gdb.base/print-file-var-lib2.c: Include <stdio.h> and
        "print-file-var.h".
        (this_version_id) Use ATTRIBUTE_VISIBILITY.
        (get_version_2): Print this_version_id and its address.
        Add extern "C" wrappers around interface functions.
        * gdb.base/print-file-var-main.c: Include <dlfcn.h>, <assert.h>,
        <stddef.h> and "print-file-var.h".
        Add extern "C" wrappers around interface functions.
        [VERSION_ID_MAIN] (this_version_id): Define.
        (main): Define v0.  Use dlopen if SHLIB_NAME is defined.
        * gdb.base/print-file-var.h: Add some #defines to simplify setting
        up extern "C" blocks.
        * gdb.base/print-file-var.exp (test): New, factored out from top
        level.
        (top level): Test all combinations of attribute hidden or not,
        dlopen or not, and this_version_id symbol in main file or not.
        Compile tests as both C++ and C, make test names unique.

2019-10-01  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Test "show logging filename".

2019-10-01  Tom Tromey  <tom@tromey.com>

        * lib/gdb-utils.exp (style): Handle "metadata" argument.
        * gdb.base/style.exp: Add metadata style test.

2019-10-01  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Test "pwd".

2019-10-01  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Update tests.

2019-10-01  Andreas Arnez  <arnez@linux.ibm.com>

        * gdb.base/pretty-print.c (struct s1_t): Change fields 'three' and
        'six' to unsigned.
        (s1): Initialize fields 'four' and 'six' instead of 'three' and
        'five'.  Use an all-ones bit pattern for each.
        * gdb.base/pretty-print.exp: Adjust expected output of "print s1"
        to its changed values.

2019-09-30  Tom Tromey  <tromey@adacore.com>

        * gdb.rust/traits.rs: Disable all warnings.

2019-09-29  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/gdb-index.exp: Handle new location of .dwz file.

2019-09-29  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/gdb-index.exp: Use with_test_prefix for second objcopy.

2019-09-27  Tom de Vries  <tdevries@suse.de>

        * gdb.reverse/step-precsave.exp: Add missing $gdb_prompt in regexps.

2019-09-27  Tom de Vries  <tdevries@suse.de>

        PR record/23188
        * gdb.reverse/step-precsave.exp: Add kfail for PR record/23188.

2019-09-26  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/py_taft.exp: New file.
        * gdb.ada/py_taft/main.adb: New file.
        * gdb.ada/py_taft/pkg.adb: New file.
        * gdb.ada/py_taft/pkg.ads: New file.

2019-09-24  Tom de Vries  <tdevries@suse.de>

        PR gdb/24598
        * gdb.arch/amd64-init-x87-values.exp: Add xfail.

2019-09-22  Tom de Vries  <tdevries@suse.de>

        * gdb.base/restore.exp: Allow register variables to be optimized out at
        -O0.

2019-09-20  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/spu-info.exp: Remove file.
        * gdb.arch/spu-info.c: Remove file.
        * gdb.arch/spu-ls.exp: Remove file.
        * gdb.arch/spu-ls.c: Remove file.

        * gdb.asm/asm-source.exp: Remove support for spu*-*-*.
        * gdb.asm/spu.inc: Remove file.

        * gdb.base/dump.exp: Remove support for spu*-*-*.
        * gdb.base/stack-checking.exp: Likewise.
        * gdb.base/overlays.exp: Likewise.
        * gdb.base/ovlymgr.c: Likewise.
        * gdb.base/spu.ld: Remove file.

        * gdb.cp/bs15503.exp: Remove support for spu*-*-*.
        * gdb.cp/cpexprs.exp: Likewise.
        * gdb.cp/exception.exp: Likewise.
        * gdb.cp/gdb2495.exp: Likewise.
        * gdb.cp/mb-templates.exp: Likewise.
        * gdb.cp/pr9167.exp: Likewise.
        * gdb.cp/userdef.exp: Likewise.

        * gdb.xml/tdesc-regs.exp: Remove support for spu*-*-*.

        * gdb.cell: Remove directory.
        * lib/cell.exp: Remove file.

2019-09-19  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_test): Eliminate "^FOOBAR$" pattern.

2019-09-19  Tom de Vries  <tdevries@suse.de>

        * lib/gdbserver-support.exp (gdb_target_cmd): Fix argument passing.

2019-09-19  Tom de Vries  <tdevries@suse.de>

        * lib/gdbserver-support.exp (gdb_target_cmd_ext): Return 2 (meaning
        UNSUPPORTED) for 'Network is unreachable' message.  Factor out of ...
        (gdb_target_cmd): ... here.
        * gdb.server/server-connect.exp: Use gdb_target_cmd_ext, handle return
        value 2.

2019-09-18  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/source-dir.exp: Avoid having directory names in test
        names.

2019-09-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/source-dir.exp: Add extra test for mapped compilation
        directory.

2019-09-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/list-missing-source.exp: New file.

2019-09-14  Tom de Vries  <tdevries@suse.de>

        PR teststuite/24599
        * gdb.ada/rename_subscript_param.exp: Require gnatmake 8.
        * lib/ada.exp (gnatmake_version_at_least): New proc.

2019-09-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Use exec_has_index_section.

2019-09-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Add test for 'maint info sections'.

2019-09-12  Tom de Vries  <tdevries@suse.de>

        * gdb.base/store.exp: Allow register variables to be optimized out at
        -O0.

2019-09-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.ada/rdv_wait.exp: Update to new task names.
        * gdb.base/task_switch_in_core.exp: Likewise.
        * gdb.base/info_sources_base.c: Likewise.

2019-09-10  Tom Tromey  <tromey@adacore.com>

        * boards/cc-with-tweaks.exp: Set GNATMAKE_FOR_TARGET.

2019-09-10  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/dgopt.exp: New file.
        * gdb.ada/dgopt/x.adb: New file.

2019-09-08  Tom Tromey  <tom@tromey.com>

        * gdb.tui/resize.exp: Remove setup_xfail.
        * gdb.tui/regs.exp: Remove setup_xfail.
        * gdb.tui/basic.exp: Remove setup_xfail.

2019-09-06  David Blaikie  <dblaikie@gmail.com>

        * gdb.base/label.exp: un-XFAIL label related tests under Clang.
        * gdb.cp/cplabel.exp: Ditto.
        * gdb.linespec/ls-errs.exp: Ditto.

2019-09-05  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (cmp_file_string): New proc.
        * gdb.base/ui-redirect.exp: Replace "gdb_breakpoint main" with
        runto_main.  Verify save breakpoints output.

2019-09-04  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/info-var.exp: Test info variables without running
        to main, to avoid expect's buffer overflow.

2019-09-03  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/bias.exp: New file.
        * gdb.ada/bias/bias.adb: New file.
        * gdb.ada/print_chars.exp: Add regression test.
        * gdb.ada/print_chars/foo.adb (My_Character): New type.
        (MC): New variable.

2019-08-29  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/argv0-symlink.exp: Run only on native target
        and local host.

2019-08-29  Tom de Vries  <tdevries@suse.de>

        * gdb.fortran/info-types.exp: Fix gdb_test regexp to allow more
        diverse debug info.
        * lib/fortran.exp (fortran_int8): New proc, based on fortran_int4.

2019-08-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/info-var.exp: Allow info variables to print info for files
        other than info-var-f1.c and info-var-f2.c.

2019-08-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-types.exp: Add module.
        * gdb.fortran/info-types.f90: Update expected results.

2019-08-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/info-types.exp: New file.
        * gdb.fortran/info-types.f90: New file.
        * lib/fortran.exp (fortran_character1): New proc.

2019-08-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/info-fun.exp: Extend to test the -n flag for 'info
        functions'.  Reindent as needed.
        * gdb.base/info-var-f1.c: New file.
        * gdb.base/info-var-f2.c: New file.
        * gdb.base/info-var.exp: New file.
        * gdb.base/info-var.h: New file.

2019-08-26  Tom de Vries  <tdevries@suse.de>

        PR c++/24852
        * gdb.cp/no-libstdcxx-probe.exp: New test.

2019-08-26  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (skip_libstdcxx_probe_tests_prompt): Return 1 if probe
        * tests need to be skipped.
        * gdb.cp/exceptprint.exp: Update call to skip_libstdcxx_probe_tests.
        * gdb.mi/mi-catch-cpp-exceptions.exp: Update call to
        mi_skip_libstdcxx_probe_tests.

2019-08-26  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.python/py-xmethods.exp: Use raw strings when passing
        arguments to SimpleXMethodMatcher.

2019-08-22  Tom de Vries  <tdevries@suse.de>

        * gdb.multi/multi-term-settings.exp (coretest): Make gdb_test messages
        more informative.

2019-08-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/with.exp: Test "with" with no arguments.

2019-08-21  Tom de Vries  <tdevries@suse.de>

        * gdb.base/gdb-caching-proc.exp: Sort files.

2019-08-20  Tom de Vries  <tdevries@suse.de>

        * lib/pascal.exp (gdb_compile_pascal): Remove $destfile before
        compilation.

2019-08-16  Tom de Vries  <tdevries@suse.de>

        * gdb.base/compare-sections.exp ("after run to main"): Allow
        mismatched read-only sections for PIE executables.

2019-08-16  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp (_csi_Z): New proc.
        * gdb.tui/basic.exp: Update window positions.
        * gdb.tui/empty.exp: Update window positions.

2019-08-15  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/examine-backward.exp: Correct regexp for
        "examine 3 bytes backward from ${address_zero}".

2019-08-15  Tom Tromey  <tom@tromey.com>

        * gdb.tui/empty.exp: Enable resizing tests.

2019-08-15  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/char_enum.exp: Add regression tests.
        * gdb.ada/char_enum/foo.adb (Char_Enum_Type): Use '_'
        and '0'.
        (Char, Gchar): Update.
        * gdb.ada/char_enum/pck.ads (Global_Enum_Type): Use '+'.

2019-08-15  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/python.exp: Expect a leading underscore on
        GdbOutput{,Error}File.

2019-08-15  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.dwarf2/dw2-dir-file-name.exp: Skip on remote or
        Windows host.

2019-08-15  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/batch-preserve-term-settings.exp
        (test_terminal_settings_preserved_after_sigterm): Skip on Windows.

2019-08-15  Christian Biesinger  <cbiesinger@google.com>

        * lib/gdb.exp: When running on a mingw target, replace
        /x/ with x:/.

2019-08-14  Alan Hayward  <alan.hayward@arm.com>

        * gdb.arch/aarch64-prologue.c: New test.
        * gdb.arch/aarch64-prologue.exp: New file.

2019-08-13  Tom de Vries  <tdevries@suse.de>

        * gdb.gdb/selftest.exp (send ^C to child process again): Accept also
        Thread.

2019-08-13  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.python/py-completion.exp: Download the .py file to the host
        and use its host pathname.  Conditionalize tests that use
        tab completion and manipulate files on the build machine.
        * gdb.python/py-events.exp: Download the .py file to the host
        and use its host pathname.
        * gdb.python/py-evsignal.exp: Likewise.
        * gdb.python/py-evthreads.exp: Likewise.
        * gdb.python/py-framefilter-invalidarg.exp: Match Windows
        pathname syntax.
        * gdb.python/py-framefilter.exp: Download the .py file to the right
        place on the host.  Match Windows pathname syntax.
        * gdb.python/py-mi-var-info-path-expression.exp: Download the
        .py file to the host and use its host pathname.
        * gdb.python/py-objfile-script.exp: Match Windows pathname syntax.
        * gdb.python/py-objfile.exp: Expect a host pathname, not a
        build pathname.  Skip symlink test on Windows host.  Add missing
        newline at end of file.
        * gdb.python/py-pp-maint.exp: Download the .py file to the host
        and use its host pathname.
        * gdb.python/py-pp-registration.exp: Match Windows pathname syntax.
        * gdb.python/py-section-script.exp: Use host location of binfile
        on safe-path.  Use correct path separator on Windows host.
        Reorder alternatives in gdb_test_multiple to prevent matching
        the wrong alternative on success.
        * gdb.python/py-symtab.exp: Match Windows pathname syntax.

2019-08-12  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.gdb/selftest.exp (test_with_self): Update test to now
        expect the GDB inferior to no longer immediately stop after
        being resumed with "signal SIGINT".

2019-08-09  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.linespec/break-ask.exp: Generalize regexps to match
        Windows pathnames too.

2019-08-08  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24862
        * lib/tuiterm.exp (_accept): Fix CSI regexp.

2019-08-07  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/style.exp: Update tests for help doc new invariants.
        * gdb.base/help.exp: Likewise.

2019-08-06  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add disassemble test.
        * gdb.base/style.c (some_called_function): New function.
        (main): Use it.

2019-08-05  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/py-block.exp: Test dictionary access on blocks.

2019-08-05  Simon Marchi  <simon.marchi@efficios.com>

        PR gdb/24863
        * gdb.mi/list-thread-groups-available.exp: Increase timeout for
        -list-thread-groups --available test when running under
        check-read1.

2019-08-05  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24863
        * lib/gdb.exp (with_read1_timeout_factor): New proc.
        * gdb.base/help.exp: Use with_read1_timeout_factor.
        * gdb.base/info-macros.exp: Same.
        * gdb.cp/nested-types.exp: Same.

2019-08-05  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (version_at_least): Factor out of ...
        (tcl_version_at_least): ... here.
        (gdb_compile): Fail if pie results in non-PIE executable.
        (readelf_version, readelf_prints_pie): New proc.
        (exec_is_pie): Return -1 if unknown.

2019-08-05  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (tcl_version_at_least): Fix typo.

2019-08-04  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.server/reconnect-ctrl-c.exp: Skip if nointerrupts.

2019-08-04  Sandra Loosemore  <sandra@codesourcery.com>

        * lib/completion-support.exp (test_gdb_complete_none): Skip
        tab completion tests if no readline support.
        (test_gdb_complete_unique_re): Likewise.
        (test_gdb_complete_multiple): Likewise.

2019-08-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/info_sources.exp: New file.
        * gdb.base/info_sources.c: New file.
        * gdb.base/info_sources_base.c: New file.

2019-08-01  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.base/batch-exit-status.exp: Call test_exit_status with
        prefix argument.
        (test_exit_status): Add prefix argument.

2019-08-01  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24863
        * gdb.threads/fork-plus-threads.exp: Fix check-run1 timeout by
        calling exp_continue for new thread and thread exited messages.

2019-08-01  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24863
        * gdb.base/structs.exp: Fix check-read1 timeout using
        gdb_test_sequence.
        * lib/gdb.exp (tcl_version_at_least, lrepeat): New proc.

2019-08-01  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24863
        * gdb.base/break-interp.exp: Use exp_continue after each "info files"
        line.

2019-08-01  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24863
        * gdb.base/signals.exp: Fix check-read1 timeout using gdb_test_sequence.

2019-07-30  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/display_nested.exp: New file.
        * gdb.ada/display_nested/foo.adb: New file.
        * gdb.ada/display_nested/pack.adb: New file.
        * gdb.ada/display_nested/pack.ads: New file.

2019-07-30  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/py-symbol.c: Add a static variable and one in an anonymous
        namespace.
        * gdb.python/py-symbol.exp: Test gdb.lookup_static_symbol.

2019-07-30  Tom de Vries  <tdevries@suse.de>

        * lib/read1.c (read): Don't use unsetenv (v), use setenv (v, "", 1)
        instead.

2019-07-30  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24834
        * lib/gdb.exp (gdb_compile): Fail if nopie results in PIE executable.
        (exec_is_pie): New proc.

2019-07-29  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/py-objfile.exp: Fix misspelling (nonexistant -> nonexistent)

2019-07-29  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/py-objfile.c: Add global and static vars.
        * gdb.python/py-objfile.exp: Test new functions Objfile.
          lookup_global_symbol and lookup_static_symbol.

2019-07-29  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp (Term::_csi_@): New proc.
        (Term::_csi_X): Don't move cursor.

2019-07-29  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/options.exp: Update backtrace - completion to
        new option -frame-info.
        * gdb.base/frame-args.exp: Test new 'frame-arguments presence'.
        Test new 'set print frame-info'.  Test backtrace -frame-info
        overriding 'set print frame-info'.
        * gdb.python/py-framefilter.exp: Test new 'frame-arguments presence'.
        Test new 'set print frame-info'.
        Verify consistency of backtrace with and without filters, with and
        without -no-filters.
        * gdb.python/py-framefilter-invalidarg.exp: Update to new print_what
        default.

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.linespec/explicit.exp: Fix completion trigger for "complete with
        no arguments".

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.linespec/explicit.exp: Fix gdb_test_multiple regexps where second
        is a substring of the first for "complete non-unique file name".

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.python/python.exp: Don't terminate gdb_test_multiple regexp
        with ".*".

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (skip_libstdcxx_probe_tests_prompt, gdb_is_target_1):
        Pass prompt_regexp parameter to gdb_test_multiple calls.

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.base/maint.exp: Use "\r\n" instead of "\[\r\n\]+" in "maint
        print registers" regexps.

2019-07-29  Tom de Vries  <tdevries@suse.de>

        * gdb.base/define.exp: Add "\r\n" to "reset gdb_prompt" regexp.

2019-07-29  Tom de Vries  <tdevries@suse.de>

        PR gdb/24855
        * lib/gdb.exp (gdb_test_multiple): Add prompt_regexp parameter.
        (skip_python_tests_prompt): Add prompt_regexp argument to
        gdb_test_multiple calls.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/main.exp: New file.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp (Term::clean_restart): Make "executable"
        optional.
        * gdb.tui/empty.exp: New file.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp (spawn): New proc.
        (Term::resize): New proc.
        * gdb.tui/resize.exp: New file.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/list.exp: New file.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/regs.exp: New file.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/basic.exp: Add "layout split" test.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * gdb.tui/basic.exp: Add "layout asm" test.

2019-07-27  Tom Tromey  <tom@tromey.com>

        * lib/tuiterm.exp: New file.
        * gdb.tui/basic.exp: New file.

2019-07-27  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/dw2-ranges-func.exp (enable_foo_cold_stepping):
        Enable tests associated with this flag.  Adjust regex
        referencing "foo_low" to now refer to "foo_cold" instead.

2019-07-27  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/dw2-ranges-func.c: Rename to...
        * gdb.dwarf2/dw2-ranges-func-lo-cold.c: ...this.
        * gdb.dwarf2/dw2-ranges-func-lo-cold.c (foo_low): Change name to
        foo_cold.  Revise comments to match.
        * gdb.dwarf2/dw2-ranges-func-hi-cold.c: New file.
        * gdb.dwarf2/dw2-ranges-func.exp (do_test): New proc. Existing tests
        were wrapped into this proc; Call do_test in loop from outermost
        level.
        (foo_low): Rename all occurrences to "foo_cold".
        (backtrace from baz): New test.
        (x2/i foo_cold): New test.
        (info line *foo_cold): New test.

2019-07-26  Tom de Vries  <tdevries@suse.de>

        * gdb.arch/i386-pkru.exp: Fix unterminated string.

2019-07-25  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24830
        * gdb.mi/mi-catch-cpp-exceptions.exp: Call
        mi_skip_libstdcxx_probe_tests, and skip unsupported tests.
        * lib/gdb.exp (skip_libstdcxx_probe_tests_prompt): Factor out of ...
        (skip_libstdcxx_probe_tests): ... here.
        * lib/mi-support.exp (mi_skip_libstdcxx_probe_tests): New proc.

2019-07-24  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24807
        * gdb.objc/basicclass.m: Include stdio.h.
        * gdb.objc/nondebug.m: Same.
        * gdb.objc/objcdecode.m: Same.

2019-07-24  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24612
        * gdb.base/infoline-reloc-main-from-zero.exp: Add -Wl,-N to
        additional_flags.

2019-07-24  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24831
        * gdb.multi/tids.exp: Update error messages for info threads.

2019-07-24  Tom de Vries  <tdevries@suse.de>

        * gdb.base/info-types.exp: Allow info types to print info for more than
        one file.

2019-07-23  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24842
        * gdb.dwarf2/multidictionary.exp: Consume initial prompt after
        gdb_spawn_with_cmdline_opts.

2019-07-23  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

        * gdb.arch/arm-cmse-sgstubs.c: New test.
        * gdb.arch/arm-cmse-sgstubs.exp: New file.

2019-07-23  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24711
        * gdb.mi/mi-complete.exp: Wait for "set max-completions" result before
        issuing next command.

2019-07-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.ada/info_auto_lang.exp: Update expected results.
        * gdb.base/info-types.c: Add additional types to check.
        * gdb.base/info-types.exp: Update expected results.

2019-07-22  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/info-types.c: New file.
        * gdb.base/info-types.exp: New file.

2019-07-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-bp-infcall.c: New file.
        * gdb.arch/riscv-bp-infcall.exp: New file.

2019-07-17  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR breakpoints/24541
        * gdb.mi/mi-catch-cpp-exceptions.exp: Remove kfail due to 24541.

2019-07-14  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24760
        * gdb.objc/basicclass.exp: Fix unterminated string.

2019-07-12  Bernhard Heckel  <bernhard.heckel@intel.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/vla-ptype.exp: Print array with negative bounds.
        * gdb.fortran/vla-sizeof.exp: Print the size of an array with
        negative bounds.
        * gdb.fortran/vla-value.exp: Print elements of an array with
        negative bounds.
        * gdb.fortran/vla.f90: Setup an array with negative bounds for
        testing.

2019-07-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/options.exp (expect_string): Dequote strings in
        results.
        (test-string): Test strings with different quoting and reindent.

2019-07-10  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/mi_ex_cond.exp: Update expected results.
        * gdb.ada/mi_catch_ex_hand.exp: Update expected results.
        * gdb.ada/mi_catch_ex.exp: Update expected results.
        * gdb.ada/mi_catch_assert.exp: Update expected results.
        * gdb.ada/catch_ex.exp (catch_exception_info)
        (catch_exception_entry, catch_assert_entry)
        (catch_unhandled_entry): Update.
        * gdb.ada/catch_assert_if.exp: Update expected results.

2019-07-10  Richard Bunt  <richard.bunt@arm.com>
        Stephen Roberts  <stephen.roberts@arm.com>

        * gdb.base/define.exp: Restore original prompt.

2019-07-09  Pedro Alves  <palves@redhat.com>

        * gdb.cp/catch-multi-stdlib.exp: Adjust expected "info
        breakpoints" output.
        * gdb.cp/exception.exp: Adjust expected "info breakpoints" output.
        * gdb.python/py-breakpoint.exp: No longer expect that "catch
        throw" creates breakpoint.
        * gdb.mi/mi-catch-cpp-exceptions.exp (setup_catchpoint): Expect
        'type="catchpoint"'.

2019-07-09  Pedro Alves  <palves@redhat.com>

        PR c++/15468
        * gdb.cp/except-multi-location-lib.cc: New.
        * gdb.cp/except-multi-location-main.cc: New.
        * gdb.cp/except-multi-location.exp: New.

2019-07-09  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/printcmds.exp (test_printf_convenience_var): Set
        language to "c++" before dealing with wchar_t.  Remove DO_WSTRING
        argument and update callers.

2019-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-break-on-asm-line.S: New file.
        * gdb.arch/amd64-break-on-asm-line.exp: New file.

2019-07-08  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/printcmds.exp: Test printing C string and
        C wide string convenience vars without transiting via the inferior.
        Also make test names unique.

2019-07-08  Alan Hayward  <alan.hayward@arm.com>

        PR breakpoints/25011
        * gdb.base/break-idempotent.exp: Test both PIE and non PIE.

2019-07-04  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (foreach_with_prefix): Don't return early if
        body returned ok(0), break(3) or continue(4).
        * gdb.testsuite/foreach_with_prefix.exp: New file.

2019-07-04  Alan Hayward  <alan.hayward@arm.com>

        * gdb.server/unittest.exp: Allow 0 unit tests to run.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (foreach_with_prefix): Use "catch" and
        "return -code".

2019-07-03  Pedro Alves  <palves@redhat.com>

        PR cli/24732
        * gdb.base/shell.exp: Load completion-support.exp.
        Adjust expected error output.  Add completion tests.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * lib/completion-support.exp (test_gdb_complete_cmd_multiple): Use
        string_to_regexp.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (expect_none, expect_flag, expect_bool)
        (expect_integer): Adjust to expect "-string".
        (expect_string): New.
        (all_options): Expect "-string".
        (test-flag, test-boolean): Adjust to expect "-string".
        (test-string): New proc.
        (top level): Call it.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-misc, test-flag, test-boolean)
        (test-uinteger, test-enum): Adjust res_test_gdb_... calls to pass
        the expected output in the success.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * lib/completion-support.exp (test_gdb_complete_tab_multiple):
        Split one gdb_test_multiple call in two to avoid a race.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/with.c: New file.
        * gdb.base/with.exp: New file.

2019-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/settings.exp: Replace all references to "maint
        test-settings set" with references to "maint set test-settings",
        and all references to "maint test-settings show" with references
        to "maint show test-settings".

2019-07-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/settings.exp (test-string): Adjust expected out when
        testing "maint test-settings show filename"

2019-07-02  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-info-threads): New procedure.
        (top level): Call it.

2019-06-28  Tom Tromey  <tromey@adacore.com>

        * gdb.dwarf2/ada-linkage-name.c: New file.
        * gdb.dwarf2/ada-linkage-name.exp: New file.

2019-06-27  Tom Tromey  <tromey@adacore.com>

        PR c++/20020:
        * gdb.cp/constexpr-field.exp: Use setup_xfail.

2019-06-26  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/varval.exp: Compile twice, once without bad DWARF.

2019-06-26  Tom de Vries  <tdevries@suse.de>

        * gdb.base/index-cache.exp: Add back missing debug option.

2019-06-23  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/alias.exp: Test non matching/non existing prefixes.

2019-06-25  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24727
        * gdb.dwarf2/dw2-restrict.S: Regenerate using clang 5.0.1.

2019-06-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/implptr-64bit.exp: Fix intra-CU '%' label reference.

2019-06-24  Tom de Vries  <tdevries@suse.de>

        * gdb.trace/entry-values.exp: Use DW_FORM_udata instead of
        DW_FOR_sdata for DW_AT_decl_file.  Use 0 for DW_AT_decl_file.
        * gdb.trace/unavailable-dwarf-piece.exp: Same.

2019-06-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/inlined_subroutine-inheritance.exp:

2019-06-21  Tom de Vries  <tdevries@suse.de>

        * gdb.base/index-cache.exp: Add additional_flags=-Wl,--build-id.

2019-06-21  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24518
        PR ada/24713
        * gdb.ada/ptype_union.exp: Mark as unsupported if executable contains
        index.

2019-06-19  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/length_cond.exp: Add intro comment.

2019-06-19  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/length_cond.exp: New file.
        * gdb.ada/length_cond/length_cond.adb: New file.
        * gdb.ada/length_cond/pck.adb: New file.
        * gdb.ada/length_cond/pck.ads: New file.

2019-06-18  Tom de Vries  <tdevries@suse.de>

        * boards/fission.exp (debug_flags): Add "-fuse-ld=gold".

2019-06-18  Tom Tromey  <tromey@adacore.com>

        * gdb.base/list0.h: Add comment explaining control character.

2019-06-18  Tom de Vries  <tdevries@suse.de>

        * boards/fission.exp: Break up long debug_flags line.

2019-06-16  Tom de Vries  <tdevries@suse.de>

        PR gdb/24445
        * gdb.dwarf2/gdb-index.exp (add_gdb_index): Update dwz file with
        generated index.

2019-06-16  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/24686
        * gdb.mi/mi-catch-cpp-exceptions.exp: Add an extra pattern to
        improve detection of bug gdb/24541.

2019-06-16  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/24669
        * gdb.base/index-cache.exp (uses_readnow,
        expecting_index_cache_use): Define global variable.
        (test_cache_enabled_miss, test_cache_enabled_hit): Use
        expecting_index_cache_use.

2019-06-16  Bernhard Heckel  <bernhard.heckel@intel.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/pointers.f90: New file.
        * gdb.fortran/print_type.exp: New file.
        * gdb.fortran/vla-ptype.exp: Adapt expected results.
        * gdb.fortran/vla-type.exp: Likewise.
        * gdb.fortran/vla-value.exp: Likewise.
        * gdb.mi/mi-vla-fortran.exp: Likewise.

2019-06-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-catch-cpp-exceptions.cc: New file.
        * gdb.mi/mi-catch-cpp-exceptions.exp: New file.
        * lib/mi-support.exp (mi_expect_stop): Handle 'exception-caught'
        as a stop reason.

2019-06-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/annota1.exp: Update expected results.
        * gdb.cp/annota2.exp: Likewise.
        * gdb.cp/annota3.exp: Likewise.

2019-06-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/style-logging.exp: Remove path from test name.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        PR gdb/24502:
        * gdb.base/style-logging.exp: New file.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        * gdb.base/symfile-warn.exp: New file.
        * gdb.base/symfile-warn.c: New file.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        * gdb.base/annotate-symlink.exp: New file.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/set_wstr.exp: Add reassignment test.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/formatted_ref.exp (test_p_x_addr): Check
        'unchecked_access and 'unrestricted_access as well.

2019-06-14  Tom Tromey  <tromey@adacore.com>

        PR ada/24539:
        * gdb.ada/vla.exp: Update tests.
        * gdb.ada/vla/vla.adb (Record_Type): Use No_Component_Reordering
        pragma.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/settings.exp (test-integer): Test junk after
        "unlimited".

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-thread-apply): New.
        (top level): Call it.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-frame-apply): New.
        (top level): Test print commands with different "frame apply"
        prefixes.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * lib/completion-support.exp (test_gdb_complete_tab_multiple)
        (test_gdb_complete_cmd_multiple, test_gdb_complete_multiple): Add
        'max_completions' parameter and handle it.
        (test_gdb_completion_offers_commands): New.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-backtrace): Test completing qualifiers.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp (test-backtrace): New.
        (top level): Call it.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.guile/scm-frame-args.exp: Use "set print
        raw-frame-arguments" instead of "set print raw frame-arguments".
        * gdb.python/py-frame-args.exp: Likewise.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.compile/compile.exp: Adjust expected output to option
        processing changes.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.exp: Build executable.
        (test-print): New procedure.
        (top level): Call it, once for "print" and another for "compile
        print".

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/options.c: New file.
        * gdb.base/options.exp: New file.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/settings.exp (test-boolean, test-auto-boolean): Check
        that "o" is ambiguous.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/settings.c: New file.
        * gdb.base/settings.exp: New file.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/completion.exp: Fix comment typo.

2019-06-13  Pedro Alves  <palves@redhat.com>

        * gdb.multi/tids.exp: Adjust expected output.  Add "thread apply 1
        foo --1" test.

2019-06-11  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/block-data.f: New.
        * gdb.fortran/block-data.exp: New.

2019-06-11  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24521
        * gdb.multi/remove-inferiors.exp: Allow "Expanding full symbols"
        message.

2019-06-11  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24521
        * gdb.dwarf2/nonvar-access.exp: Fix main high_pc.

2019-06-11  Tom de Vries  <tdevries@suse.de>

        * boards/readnow.exp: New file.

2019-06-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/vla-sizeof.exp: Update expected results.

2019-06-06  Amos Bird  <amosbird@gmail.com>

        * gdb.base/annota1.exp (thread_switch): Add test for
        thread-exited annotation.

2019-06-06  Tom Tromey  <tromey@adacore.com>

        * gdb.base/maint.exp: Expect command started/finished output.

2019-06-05  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-unwind-long-insn-6.s: Remove use of 'I' in
        comment.
        * gdb.arch/riscv-unwind-long-insn-8.s: Likewise.

2019-06-05  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-unwind-long-insn-6.s: New file.
        * gdb.arch/riscv-unwind-long-insn-8.s: New file.
        * gdb.arch/riscv-unwind-long-insn.c: New file.
        * gdb.arch/riscv-unwind-long-insn.exp: New file.

2019-06-04  Christian Biesinger  <cbiesinger@google.com>

        * gdb.python/py-type.exp: Test for new gdb.Type.objfile property.

2019-06-03  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * lib/gdb.exp (help_list_trailer): New regexp variable
        factorizing the help trailer message.
        (test_class_help): Use help_list_trailer.  Add LIST_OF_COMMANDS
        arg to allow to better factorize various tests.
        (test_user_defined_class_help): Factorizes testing 'help user-defined'.
        (test_prefix_command_help): Use help_list_trailer.
        * gdb.python/py-cmd.exp: Use test_user_defined_class_help.
        * gdb.guile/scm-cmd.exp: Likewise.
        * gdb.trace/tracecmd.exp: Update caller of test_class_help.
        * gdb.base/help.exp: Use test_user_defined_class_help.
        * gdb.base/style.exp: Add tests for styling of help and apropos.
        * lib/gdb-utils.exp (style): Add title and highlight styles.

2019-05-31  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/shell.exp: Test pipe command, $_shell_exitcode,
        $_shell_exitsignal.
        * gdb.base/default.exp: Update for new convenience variables.

2019-05-29  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/complete.exp (test_gdb_no_completion): Add "/" and "-"
        to "break complete ada" test case's regexp.

2019-05-29  Tom Tromey  <tromey@adacore.com>

        PR c++/20020:
        * gdb.cp/constexpr-field.exp: New file.
        * gdb.cp/constexpr-field.cc: New file.

2019-05-29  Tom Tromey  <tromey@adacore.com>

        * gdb.base/finish.exp (finish_no_print): New proc.
        (finish_tests): Call it.

2019-05-24  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/gdb-add-index.exp: New file.

2019-05-22  Tom Tromey  <tromey@adacore.com>

        * gdb.base/info-shared.exp (check_info_shared): Use "style".
        * gdb.base/style.exp: Use "style".
        * lib/gdb-utils.exp (style): New proc.

2019-05-22  Tom de Vries  <tdevries@suse.de>

        * gdb.base/align.exp: Require c++11.

2019-05-22  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24586
        * gdb.python/py-mi-var-info-path-expression.exp: Call
        mi_skip_python_tests to check if python is supported.

2019-05-22  Alan Hayward  <alan.hayward@arm.com>

        * gdb.arch/aarch64-pauth.c: New test.
        * gdb.arch/aarch64-pauth.exp: New file.

2019-05-22  Alan Hayward  <alan.hayward@arm.com>

        * README (Re-running Tests Outside The Testsuite): New section.

2019-05-21  Tom de Vries  <tdevries@suse.de>

        * gdb.arch/amd64-eval.exp: Require c++11.
        * gdb.base/max-depth.exp: Same.
        * gdb.compile/compile-cplus-array-decay.exp: Same.
        * gdb.cp/meth-typedefs.exp: Same.
        * gdb.cp/subtypes.exp: Same.
        * gdb.cp/temargs.exp: Same.

2019-05-21  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdbserver-support.exp (gdbserver_run): Mark kill as optional.

2019-05-18  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/18644
        * gdb.fortran/complex.exp: Remove setup_kfail calls.
        * gdb.fortran/printing-types.exp: Add new test.
        * gdb.fortran/printing-types.f90: Add 16-byte real variable for
        testing.
        * gdb.fortran/type-kinds.exp (test_cast_1_to_type_kind): Remove
        setup_kfail call.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * README (Running the Testsuite): Change example.
        (Testsuite Parameters): Remove TRANSCRIPT.
        * lib/gdb.exp: Remove TRANSCRIPT check.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * README (Testsuite Parameters): Add replay logging to
        GDBSERVER_DEBUG.
        (gdbserver,debug): Refer to GDBSERVER_DEBUG.
        * lib/gdbserver-support.exp (gdbserver_start): Treat gdbserverdebug
        as a comma separated list.
        (gdb_debug_init): Override procedure.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdb.exp (default_gdb_spawn): Call gdb_write_cmd_file.
        (gdb_write_cmd_file): New procedure.
        * lib/gdbserver-support.exp (gdbserver_start): Call
        gdbserver_write_cmd_file.
        (gdbserver_write_cmd_file): New procedure.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdb.exp (gdb_unload): Mark Y as an answer.
        (delete_breakpoints): Likewise.
        (gdb_run_cmd): Likewise.
        (gdb_start_cmd): Likewise.
        (gdb_starti_cmd): Likewise.
        (gdb_internal_error_resync): Likewise.
        (gdb_test_multiple): Likewise.
        (gdb_reinitialize_dir): Likewise.
        (default_gdb_exit): Likewise.
        (gdb_file_cmd): Mark kill as optional.
        (default_gdb_start): Call gdb_stdin_log_init.
        (send_gdb): Call gdb_stdin_log_write.
        (rerun_to_main): Mark Y as an answer.
        (gdb_stdin_log_init): New function.
        (gdb_stdin_log_write): Likewise.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/breakpoint-in-ro-region.exp: Disable when debugging.
        * gdb.base/debug-expr.exp: Likewise.
        * gdb.base/foll-fork.exp: Likewise.
        * gdb.base/foll-vfork.exp: Likewise.
        * gdb.base/fork-print-inferior-events.exp: Likewise.
        * gdb.base/gdb-sigterm.exp: Likewise.
        * gdb.base/gdbinit-history.exp: Likewise.
        * gdb.base/osabi.exp: Likewise.
        * gdb.base/sss-bp-on-user-bp-2.exp: Likewise.
        * gdb.base/ui-redirect.exp: Likewise.
        * gdb.gdb/unittest.exp: Likewise.
        * gdb.mi/mi-break.exp: Disable separate-mi-tty when debugging.
        * gdb.mi/mi-watch.exp: Likewise.
        * gdb.mi/new-ui-mi-sync.exp: Likewise.
        * gdb.mi/user-selected-context-sync.exp: Likewise.
        * gdb.python/python.exp: Disable debug test when debugging.
        * gdb.threads/check-libthread-db.exp: Disable when debugging.
        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
        Likewise.
        * gdb.threads/stepi-random-signal.exp: Likewise.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: Pass through GDB_DEBUG.
        * README (Testsuite Parameters): Add GDB_DEBUG.
        (gdb,debug): Add board setting.
        * lib/gdb.exp (default_gdb_start): Start debugging.
        (gdb_debug_enabled): New procedure.
        (gdb_debug_init): Likewise.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: Pass through GDB_DEBUG.
        * README (Testsuite Parameters): Add GDB_DEBUG.
        (gdb,debug): Add board setting.
        * lib/gdb.exp (default_gdb_start): Start debugging.
        (gdb_debug_enabled): New procedure.
        (gdb_debug_init): Likewise.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/ui-redirect.exp: Add debug redirect tests.

2019-05-17  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/ui-redirect.exp: Test redirection.

2019-01-28  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * gdb.mi/mi-complete.exp: New file.
        * gdb.mi/mi-complete.cc: Likewise.

2019-05-15  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-sizeof.exp: Add tests of sizeof applied to
        indexed and sliced arrays, and pointers to arrays.

2019-05-14  Tom Tromey  <tromey@adacore.com>

        * gdb.base/info-shared.exp (check_info_shared): Add "info shared"
        styling test.

2019-05-14  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-skip-prologue.S (.debug_loc): Fix base address
        selection entry encoding.

2019-05-10  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/info_exc.exp: Add "complete" test.

2019-05-09  Tom de Vries  <tdevries@suse.de>

        * gdb.arch/amd64-tailcall-self.S: Make DW_FORM_ref4 references
        CU-relative.

2019-05-09  Tom de Vries  <tdevries@suse.de>

        * gdb.arch/amd64-entry-value-paramref.S: Make DW_FORM_ref4 references
        CU-relative.

2019-05-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/frame_arg_lang.exp: New testcase.
        * gdb.ada/frame_arg_lang/bla.adb: New file.
        * gdb.ada/frame_arg_lang/pck.ads: New file.
        * gdb.ada/frame_arg_lang/pck.adb: New file.
        * gdb.ada/frame_arg_lang/foo.c: New file.

2019-05-08  Tom Tromey  <tromey@adacore.com>

        * gdb.python/py-value.exp (test_value_in_inferior): Add Ada test.

2019-05-08  Tom Tromey  <tromey@adacore.com>

        * gdb.base/ptype-offsets.exp: Update tests.

2019-05-08  Tom Tromey  <tromey@adacore.com>

        * gdb.base/ptype-offsets.exp: Use string_to_regexp.  Fix test
        cases.
        * gdb.base/ptype-offsets.cc (struct abc) <my_int_type>: Now
        "short".

2019-05-08  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/vla.exp: New file.
        * gdb.ada/vla/vla.adb: New file.

2019-05-07  Tom de Vries  <tdevries@suse.de>

        * gdb.base/index-cache.exp (ls_host): Fix return statement.

2019-05-07  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24522
        * gdb.dlang/watch-loc.c: Fix debug_info_offset in .debug_aranges
        section.

2019-05-07  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24522
        * gdb.dwarf2/dw2-case-insensitive-debug.S: Fix debug_info_offset in
        .debug_aranges section.

2019-05-07  Tom de Vries  <tdevries@suse.de>

        PR testsuite/24159
        * lib/dwarf.exp: Fix handling of DW_FORM_ref_addr.

2019-05-06  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (exec_has_index_section): New proc.
        * gdb.base/index-cache.exp: Handle case that binfile contains an index
        section.

2019-05-04  Tom de Vries  <tdevries@suse.de>

        * boards/cc-with-debug-names.exp: New file.

2019-05-03  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/char_enum/pck.ads (Global_Enum_Type): New type.
        * gdb.ada/char_enum/foo.adb: Use Global_Enum_Type.
        * gdb.ada/char_enum.exp: Add test.

2019-05-03  Tom de Vries  <tdevries@suse.de>

        * boards/cc-with-gdb-index.exp: New file.

2019-05-02  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.rust/simple.exp: Add new test case.
        * gdb.rust/simple.rs (struct StringAtOffset): New struct.
        (main): Initialise an instance of the new struct.

2019-05-01  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/packed_array_assign/aggregates.ads (Nested_Packed): New
        record.
        (NPR): New variable.
        * gdb.ada/packed_array_assign.exp: Add nested packed assignment
        test.

2019-05-01  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/packed_array_assign.exp: Add packed assignment
        regression test.

2019-05-01  Tom de Vries  <tdevries@suse.de>

        * boards/cc-with-tweaks.exp: Generate gdb.sh, and pass it in env(GDB).

2019-05-01  Tom de Vries  <tdevries@suse.de>

        * boards/dwarf4-gdb-index.exp: Use cc-with-tweaks.exp.

2019-04-30  Ali Tamur  <tamur@google.com>

        * lib/dwarf.exp(): Added DW_FORM_strx1-4.

2019-04-30  Tom Tromey  <tromey@adacore.com>

        * lib/ada.exp (find_ada_tool): New proc.
        * lib/gdb.exp (gdb_compile_shlib): Allow .o files as inputs.
        * gdb.ada/catch_ex_std.exp: New file.
        * gdb.ada/catch_ex_std/foo.adb: New file.
        * gdb.ada/catch_ex_std/some_package.adb: New file.
        * gdb.ada/catch_ex_std/some_package.ads: New file.

2019-04-30  Tom Tromey  <tromey@adacore.com>

        PR c++/24470:
        * gdb.cp/temargs.cc: Add test code from PR.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/vla-datatypes.exp: Update expected results.
        * gdb.fortran/vla-ptype.exp: Likewise.
        * gdb.fortran/vla-type.exp: Likewise.
        * gdb.fortran/vla-value.exp: Likewise.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/ptr-indentation.exp: Update expected results.
        * gdb.fortran/ptype-on-functions.exp: Likewise.
        * gdb.fortran/vla-ptr-info.exp: Likewise.
        * gdb.fortran/vla-value.exp: Likewise.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/ptype-on-functions.exp: New file.
        * gdb.fortran/ptype-on-functions.f90: New file.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/exprs.exp (test_convenience_variables): Expect lower
        case void string.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/complex.exp: Expand.
        * gdb.fortran/complex.f: Renamed to...
        * gdb.fortran/complex.f90: ...this, and extended to add more
        complex values.

2019-04-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/intrinsics.exp: Extend to cover MOD, CEILING, FLOOR,
        MODULO, CMPLX.

2019-04-29  Andrew Burgess  <andrew.burgess@embecosm.com>
            Richard Bunt  <richard.bunt@arm.com>

        * gdb.base/max-depth.c: New file.
        * gdb.base/max-depth.exp: New file.
        * gdb.python/py-nested-maps.c: New file.
        * gdb.python/py-nested-maps.exp: New file.
        * gdb.python/py-nested-maps.py: New file.
        * gdb.python/py-format-string.exp (test_max_depth): New proc.
        (test_all_common): Call test_max_depth.
        * gdb.fortran/max-depth.exp: New file.
        * gdb.fortran/max-depth.f90: New file.
        * gdb.go/max-depth.exp: New file.
        * gdb.go/max-depth.go: New file.
        * gdb.modula2/max-depth.exp: New file.
        * gdb.modula2/max-depth.c: New file.
        * lib/gdb.exp (get_print_expr_at_depths): New proc.

2019-04-29  Tom de Vries  <tdevries@suse.de>

        * lib/opencl.exp (skip_opencl_tests): Add missing "with" in regexp.

2019-04-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/callexit.exp: Test may-call-functions off.

2019-04-25  Keith Seitz  <keiths@redhat.com>

        PR c++/24367
        * gdb.cp/meth-typedefs.cc (incomplete_struct)
        (another_incomplete_struct, test_incomplete): New definitions.
        (main): Use new definitions.
        * gdb.cp/meth-typedefs.exp: Add new tests for `test_incomplete'
        functions.

2019-04-25  Ali Tamur  <tamur@google.com>

        * lib/dwarf.exp (_handle_DW_FORM): Add DW_FORM_strx.

2019-04-25  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR corefiles/11608
        PR corefiles/18187
        * gdb.base/coredump-filter-build-id.exp: New file.

2019-04-25  Alan Hayward  <alan.hayward@arm.com>

        * Makefile.in: Pass through GDBSERVER_DEBUG.
        * README (Testsuite Parameters): Add GDBSERVER_DEBUG.
        (gdbserver,debug): Add board setting.
        * gdb.trace/tspeed.exp: Skip when debugging.
        * lib/gdb.exp (gdbserver_debug_enabled): New procedure.
        * lib/gdbserver-support.exp: Likewise

2019-04-24  Tom Tromey  <tromey@adacore.com>

        * lib/gdb.exp (gdb_compile): Don't add -fno-stack-protector for
        Rust.

2019-04-24  Tom Tromey  <tromey@adacore.com>

        * gdb.arch/amd64-eval.exp: Test bitfield return.
        * gdb.arch/amd64-eval.cc (struct Bitfields): New.
        (class Foo) <return_bitfields>: New method.
        (main): Call it.

2019-04-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.cp/many-args.cc: New file.
        * gdb.cp/many-args.exp: New file.

2019-04-23  Tom de Vries  <tdevries@suse.de>

        PR gdb/24433
        * gdb.btrace/reconnect.exp: Fix stepi 19 pattern.

2019-04-23  Alan Hayward  <alan.hayward@arm.com>

        * gdb.trace/backtrace.exp: Use nopie flag.
        * gdb.trace/circ.exp: Likewise.
        * gdb.trace/collection.exp: Likewise.
        * gdb.trace/ftrace.exp: Likewise.
        * gdb.trace/mi-trace-unavailable.exp: Likewise.
        * gdb.trace/mi-traceframe-changed.exp: Likewise.
        * gdb.trace/qtro.exp: Likewise.
        * gdb.trace/read-memory.exp: Likewise.
        * gdb.trace/report.exp: Likewise.
        * gdb.trace/tfile.exp: Likewise.
        * gdb.trace/tfind.exp: Likewise.
        * gdb.trace/unavailable.exp: Likewise.

2019-04-22  Pedro Alves  <palves@redhat.com>

        * gdb.base/solib-probes-nosharedlibrary.c,
        gdb.base/solib-probes-nosharedlibrary.exp: New files.

2019-04-19  Tom Tromey  <tromey@adacore.com>

        * gdb.ada/ptype_union.c: New file.
        * gdb.ada/ptype_union.exp: New file.

2019-04-19  Tom Tromey  <tromey@adacore.com>

        PR symtab/24423:
        * gdb.base/list0.h (foo): Add a control-l character.

2019-04-18  Tom de Vries  <tdevries@suse.de>

        PR gdb/24433
        * boards/local-board.exp: Set sysroot to "".

2019-04-18  Tom de Vries  <tdevries@suse.de>
            Pedro Alves  <palves@redhat.com>

        PR gdb/24454
        * gdb.threads/vfork-follow-child-exec.c: New file.
        * gdb.threads/vfork-follow-child-exec.exp: New file.
        * gdb.threads/vfork-follow-child-exit.c: New file.
        * gdb.threads/vfork-follow-child-exit.exp: New file.

2019-04-15  Leszek Swirski  <leszeks@google.com>

        * gdb.arch/amd64-eval.cc: New file.
        * gdb.arch/amd64-eval.exp: New file.

2019-04-11  Alan Hayward  <alan.hayward@arm.com>

        * gdb.server/sysroot.c: New test.
        * gdb.server/sysroot.exp: New file.
        * lib/gdbserver-support.exp (gdb_target_cmd): Add additional text
        matching param.

2019-04-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/align.exp: Extend test to cover structures containing
        only static fields.

2019-04-11  Tom de Vries  <tdevries@suse.de>

        * boards/cc-with-dwz-m.exp: New file.
        * boards/cc-with-dwz.exp: New file.
        * boards/cc-with-tweaks.exp: Note that check-gdb doesn't work.

2019-04-09  Simon Marchi  <simon.marchi@efficios.com>

        * gdb.base/start-cpp.exp: New file.
        * gdb.base/start-cpp.cc: New file.

2019-04-08  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-thrhandle.exp: Adjust tests to call
        thread_from_handle instead of thread_from_thread_handle.

2019-04-08  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-thrhandle.exp: Add tests for
        gdb.InferiorThread.handle.

2019-04-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-function.exp: Check calling helper function from
        all languages.
        * lib/gdb.exp (gdb_supported_languages): New proc.

2019-04-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/complex-parts.c: New file.
        * gdb.base/complex-parts.exp: New file.

2019-04-01  Tom Tromey  <tromey@adacore.com>

        PR symtab/23331:
        * gdb.dwarf2/dw2-ranges-main.c: New file.
        * gdb.dwarf2/dw2-ranges-psym.c: New file.
        * gdb.dwarf2/dw2-ranges-psym.exp: New file.

2019-03-30  Simon Marchi <simark@simark.ca>

        * gdb.base/default.exp: Add values for $_gdb_major and
        $_gdb_minor.

2019-03-29  Tom Tromey  <tromey@adacore.com>

        * gdb.base/help.exp: Tighten apropos regexp.

2019-03-29  Keith Seitz  <keiths@redhat.com>

        * gdb.fortran/array-bounds.exp: New file.
        * gdb.fortran/array-bounds.f90: New file.

2019-03-28  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.multi/multi-term-settings.c (main): Increase alarm timer.

2019-03-28  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.multi/hello.c (main): Increase alarm timer.

2019-03-28  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.threads/watchpoint-fork.exp (test): Use large timeout
        factor when no hardware watchpoint support.

2019-03-28  Alan Hayward  <alan.hayward@arm.com>
            Pedro Alves  <palves@redhat.com>

        * boards/local-board.exp: set sysroot to /.

2019-03-27  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/interrupt-daemon-attach.c (main): Add alarm and sleep
        in child.

2019-03-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-prettyprint.c (struct container) <is_map_p>: New
        field.
        (make_container): Initialise new field.
        * gdb.python/py-prettyprint.exp: Add new tests.
        * gdb.python/py-prettyprint.py (class ContainerPrinter)
        <display_hint>: New method.

2019-03-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-prettyprint.exp: Use gdb_breakpoint and
        gdb_continue_to_breakpoint more throughout this test.
        (run_lang_tests) Supply unique test names, and use
        gdb_test_no_output.

2019-03-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/finish-pretty.exp: Update expected results.
        * gdb.base/pretty-print.c: New file.
        * gdb.base/pretty-print.exp: New file.

2019-03-25  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_test_multiple): Split appends to $code and
        move comments outside list.  Append '-i "" eof' section.

2019-03-22  Alan Hayward  <alan.hayward@arm.com>

        PR testsuite/25016
        * README: Add pie options.
        * gdb.base/break-interp.exp: Ensure pie is disabled.
        * gdb.base/dump.exp: Likewise.
        * lib/gdb.exp (gdb_compile): Add pie option.

2019-03-19  Tom Tromey  <tromey@adacore.com>

        * gdb.mi/mi2-cli-display.c: New file.
        * gdb.mi/mi2-cli-display.exp: New file.

2019-03-18  Joel Brobecker  <brobecker@adacore.com>
            Tom Tromey  <tromey@adacore.com>

        * gdb.ada/ptype_array/pck.adb: New file.
        * gdb.ada/ptype_array/pck.ads: New file.
        * gdb.ada/ptype_array/foo.adb: New file.
        * gdb.ada/ptype_array.exp: New file.

2019-03-14  Tom Tromey  <tromey@adacore.com>

        * gdb.base/style.exp: Add "set style sources" test.

2019-03-13  Simon Marchi  <simon.marchi@ericsson.com>

        * mi-breakpoint-location-ena-dis.exp: Rename to ...
        * mi-breakpoint-multiple-locations.exp: ... this.
        (make_breakpoints_pattern): New proc.
        (do_test): Add mi_version parameter, test -break-insert,
        -break-info and =breakpoint-created.

2019-03-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * config/default.exp: Remove 'load_lib gdb.exp'.
        * config/monitor.exp: Likewise.
        * config/sid.exp: Likewise.
        * config/sim.exp: Likewise.
        * config/slite.exp: Likewise.
        * config/unix.exp: Likewise.
        * gdb.base/default.exp: Remove unhelpful comment.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/type-kinds.exp: Extend to cover TYPE*SIZE cases.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/intrinsics.exp: Extend to cover ABS.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/type-kinds.exp: Update expected results.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/type-kinds.exp: Test new integer type kind.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/type-kinds.exp (test_cast_1_to_type_kind): New
        function.
        (test_basic_parsing_of_type_kinds): Expand types tested.
        (test_parsing_invalid_type_kinds): New function.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/intrinsics.exp: New file.
        * gdb.fortran/intrinsics.f90: New file.
        * gdb.fortran/type-kinds.exp: New file.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/dot-ops.exp: New file.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/types.exp (test_logical_literal_types_accepted):
        Check upper and lower case logical literals.

2019-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.fortran/types.exp (test_float_literal_types_accepted):
        Remove duplicate tests.

2019-03-06  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdb.exp (builtin_cd): rename of cd.
        (cd): Override builtin.

2019-03-06  Richard Bunt  <richard.bunt@arm.com>

        * gdb.fortran/function-calls.exp: New file.
        * gdb.fortran/function-calls.f90: New test.

2019-03-04  Richard Bunt  <richard.bunt@arm.com>

        * gdb.fortran/short-circuit-argument-list.exp: Remove reliance
        on user program standard output.
        * gdb.fortran/short-circuit-argument-list.f90: Record function
        calls.

2019-02-28  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdbserver-support.exp (gdbserver_start): Check for listen
        failure.

2019-02-28  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        PR gdb/8527
        * gdb.base/interrupt-daemon-attach.c,
        gdb.base/interrupt-daemon-attach.exp: New test.

2019-02-27  Pedro Alves  <palves@redhat.com>

        * gdb.base/page.exp: Add tests for "set width/height -1".

2019-02-27  Pedro Alves  <palves@redhat.com>

        * gdb.base/page.exp: Add tests for "set/show width/height" with
        "infinite" values.

2019-02-27  Tom Tromey  <tromey@adacore.com>

        * lib/gdb.exp (skip_python_tests_prompt): Don't check for Python
        2.4.
        * gdb.python/py-finish-breakpoint.exp: Remove Python 2.4
        workaround.

2019-02-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/align.exp: Extend to compile in both C and C++, and add
        tests for structs with static members.

2019-02-26  Tom Tromey  <tromey@adacore.com>

        * gdb.python/py-value.exp (test_value_from_buffer): Check for
        ValueError, not TypeError.

2019-02-26  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-value.exp (test_value_from_buffer): New proc with
        call from main program.

2019-02-23  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_ref_changeable.exp: Update copyright year range.
        * gdb.ada/mi_ref_changeable/foo_rb20_056.adb: Likewise.
        * gdb.ada/mi_ref_changeable/pck.adb: Likewise.
        * gdb.ada/mi_ref_changeable/pck.ads: Likewise.
        * gdb.dwarf2/inlined_subroutine-inheritance.exp: Likewise.

2019-02-22  Keith Seitz  <keiths@redhat.com>

        PR symtab/23853
        * gdb.base/symlink-sourcefile.c: New file.
        * gdb.base/symlink-sourcefile.exp: New file.

2019-02-20  Tom Tromey  <tom@tromey.com>

        * gdb.base/info_qt.exp: Update.

2019-02-19  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/source.exp: Move "error in sourced script" code to
        the end.
        * gdb.base/source-error.gdb: Move contents to
        source-error-1.gdb.  Add new code to source source-error-1.gdb.
        * gdb.base/source-error-1.gdb: New file, from previous
        source-error.gdb.

2019-02-17  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Use -g3 to compile when possible.  Add test
        for macro styling.
        * gdb.base/style.c (SOME_MACRO): New macro.

2019-02-17  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add line-wrapping tests.
        * gdb.base/page.exp: Add test for quitting during pagination.

2019-02-17  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/big_packed_array: New testcase.
        * gdb.ada/homonym.exp: Fix incorrect expected output for
        "break <homonym__get_value>" test.

2019-02-13  Weimin Pan  <weimin.pan@oracle.com>

        PR breakpoints/21870
        * gdb.arch/aarch64-dbreg-contents.exp: Use runto_main + continue
        and prepare_for_testing.  Add comment.
        * gdb.arch/aarch64-dbreg-contents.c: Remove SET_WATCHPOINT and
        redundant cleanup call.  Clean up comment.

2019-02-12  Weimin Pan  <weimin.pan@oracle.com>

        PR breakpoints/21870
        * gdb.arch/aarch64-dbreg-contents.exp: New file.
        * gdb.arch/aarch64-dbreg-contents.c: New file.

2019-02-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_ref_changeable: New testcase.

2019-02-07  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/attach.exp: Add double attach test.

2019-02-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/gdb.exp (default_gdb_start): Don't match pagination
        prompt.
        (gdb_init): Set stty_init.

2019-01-27  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-finish-breakpoint.exp: Remove duplicate call to
        skip_python_tests.

2019-01-24  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/infcall-nested-structs.c (struct struct_static_02_01):
        New structure.
        (struct struct_static_02_02): Likewise.
        (struct struct_static_02_03): Likewise.
        (struct struct_static_02_04): Likewise.
        (struct struct_static_04_01): Likewise.
        (struct struct_static_04_02): Likewise.
        (struct struct_static_04_03): Likewise.
        (struct struct_static_04_04): Likewise.
        (struct struct_static_06_01): Likewise.
        (struct struct_static_06_02): Likewise.
        (struct struct_static_06_03): Likewise.
        (struct struct_static_06_04): Likewise.
        (cmp_struct_static_02_01): Likewise.
        (cmp_struct_static_02_02): Likewise.
        (cmp_struct_static_02_03): Likewise.
        (cmp_struct_static_02_04): Likewise.
        (cmp_struct_static_04_01): Likewise.
        (cmp_struct_static_04_02): Likewise.
        (cmp_struct_static_04_03): Likewise.
        (cmp_struct_static_04_04): Likewise.
        (cmp_struct_static_06_01): Likewise.
        (cmp_struct_static_06_02): Likewise.
        (cmp_struct_static_06_03): Likewise.
        (cmp_struct_static_06_04): Likewise.
        (call_all): Test new structs.
        * gdb.base/infcall-nested-structs.exp: Likewise.

2019-01-21  Alan Hayward  <alan.hayward@arm.com>
        * gdb.base/infcall-nested-structs.exp: Test C++ in addition to C.

2019-01-21  Alan Hayward  <alan.hayward@arm.com>
        * gdb.base/stack-protector.c: New test.
        * gdb.base/stack-protector.exp: New file.
        * gdb.cp/ovldbreak.exp: Only allow a single break line.
        * lib/gdb.exp (get_compiler_info): Use getting_compiler_info
        option.
        (gdb_compile): Remove stack protector for GCC and prevent
        recursion.

2019-01-16  Keith Seitz  <keiths@redhat.com>

        PR gdb/23773
        * gdb.dwarf2/inlined_subroutine-inheritance.exp: New file.

2019-01-14  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.arch/vsx-regs.exp: Add tests that use the vector register
        aliases.
        * gdb.arch/altivec-regs.exp: Likewise.  Fix indentation of two
        tests.
        * gdb.arch/powerpc-vector-regs.c: New file.
        * gdb.arch/powerpc-vector-regs.exp: New file.

2019-01-14  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.arch/altivec-regs.exp: Fix the list passed to
        gdb_expect_list when testing "info vector".

2019-01-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/style.exp: Don't include path in testname.

2019-01-10  Keith Seitz  <keiths@redhat.com>

        PR gdb/23712
        PR symtab/23010
        * gdb.dwarf2/multidictionary.exp: New file.

2019-01-09  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.cp/demangle.exp (test_gnu_style_demangling): Rename to...
        (test_gnuv3_style_demangling): ... this.
        (test_lucid_style_demangling): Remove.
        (test_arm_style_demangling): Remove.
        (test_hp_style_demangling): Remove.
        (do_tests): Remove calls to the above.

2019-01-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/mi-support.exp (mi_gdb_test): Remove interactive prompt
        case.

2019-01-06  Tom Tromey  <tom@tromey.com>

        PR gdb/28155:
        * gdb.dwarf2/typedef-void-finish.exp: New file.

2018-12-28  Tom Tromey  <tom@tromey.com>
            Simon Marchi <simark@simark.ca>

        * gdb.base/jit-exec.exp: New file.
        * gdb.base/jit-exec.c: New file.
        * gdb.base/jit-execd.c: New file.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Update test to check for address styling.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add test for styling of "Reading symbols"
        message.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add test for version number styling.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add test for print_address_symbolic.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add test for breakpoint setting.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: Add test for variable names.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * gdb.base/style.exp: New file.
        * gdb.base/style.c: New file.

2018-12-28  Tom Tromey  <tom@tromey.com>

        * lib/gdb.exp (gdb_init): Set the TERM environment variable to
        "dumb".
        * gdb.base/readline.exp (operate_and_get_next): Save and restore
        the TERM environment variable.

2018-12-27  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add
        pagination test.

2018-12-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-unusual-field-names.c: New file.
        * gdb.dwarf2/dw2-unusual-field-names.exp: New file.

2018-12-24  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.ada/bp_fun_addr/a.adb (a): Rename to bp_fun_addr.
        Filename a.adb changed to bp_fun_addr.adb.
        gdb.ada/bp_fun_addr.exp: Update test accordingly.

2018-12-21  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * lib/gdb.exp (gdb_compile): Add new nopie flag enforce
        non-PIE executables.
        * README: Mention the gdb,nopie_flag board setting.
        * gdb.arch/amd64-disp-step.exp: Use nopie flag to enforce
        non-PIE executable.
        * gdb.arch/amd64-entry-value.exp: Likewise.
        * gdb.arch/amd64-invalid-stack-middle.exp: Likewise.
        * gdb.arch/i386-float.exp: Likewise.
        * gdb.arch/i386-signal.exp: Likewise.
        * gdb.mi/mi-reg-undefined.exp: Likewise.

2018-12-21  Paul Marechal  <paul.marechal@ericsson.com>

        PR gdb/23974
        * gdb.base/info-os.exp: Check return for unknown "info os" type.

2018-12-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.ada/info_auto_lang.exp: Normalize some_c source file.
        Update order of results accordingly.

2018-12-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/annota1.exp: Update a test regexp.

2018-12-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/float.exp: Handle RISC-V targets without an FPU.

2018-12-09  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.threads/tid-reuse.c (REUSE_TIME_CAP): Declare as 60.
        (reuse_time): Initialize to REUSE_TIME_CAP.
        (check_rc): New function.
        (main): Use REUSE_TIME_CAP instead of hardcoded 60.
        Check pthread_create rc.
        (spawner_thread_func): Check pthread_create and pthread_join rc.

2018-12-08  Pedro Alves  <palves@redhat.com>

        * gdb.base/list.exp (test_forward_search): Rename to ...
        (test_forward_reverse_search): ... this.  Also test reverse-search
        and the forward-search alias.

2018-12-05  Andrew Burgess  <andrew.burgess@embecosm.com>

        * config/sim.exp (gdb_target_sim): Remove redundant adjustment of
        local timeout variable before return, and remove all local timeout
        variable entirely.
        (gdb_load): Likewise.

2018-12-01  Tom de Vries  <tdevries@suse.de>

        * gdb.base/gdb-caching-proc.exp: New file.

2018-11-25  Sergio Durigan Junior  <sergiodj@redhat.com>

        * Makefile.in (TIMESTAMP): New variable.
        (check-single): Add $(TIMESTAMP) to the end of $(DO_RUNTEST)
        command.
        (check-single-racy): Likewise.
        (check/%.exp): Likewise.
        (check-racy/%.exp): Likewise.
        (workers/%.worker): Likewise.
        (build-perf): Likewise.
        (check-perf): Likewise.
        * README: Describe new "TS" and "TS_FORMAT" variables.
        * print-ts.py: New file.

2018-11-21  Benno Fünfstück  <benno.fuenfstueck@gmail.com>

        PR python/23714
        * gdb.python/python.exp: Test command repetition after
        gdb.execute.

2018-11-20  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.opt/inline-break.exp: Add test that info breakpoint output
        is correctly aligned.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.ada/info_auto_lang.exp: New testcase.
        * gdb.ada/info_auto_lang/global_pack.ads: New file.
        * gdb.ada/info_auto_lang/proc_in_ada.adb: New file.
        * gdb.ada/info_auto_lang/some_c.c: New file.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.dwarf2/dw2-case-insensitive.exp: Update due to auto switch to
        FUNC_lang language syntax.

2018-11-20  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/info_minsym.c: New file.
        * gdb.base/info_minsym.exp: New file.

2018-11-19  Tom Tromey  <tom@tromey.com>

        PR rust/23625:
        * gdb.rust/simple.exp: Add ptype test.  Update expected output.
        * gdb.rust/expr.exp: Update expected output.  Change one test.

2018-11-19  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.rs: Don't initialize empty_enum_value.

2018-11-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/warning.exp: Don't override INTERNAL_FLAGS.  Use
        gdb_spawn_with_cmdline_opts instead of gdb_start.  Check that we
        see the expected warning.

2018-11-16  Alan Hayward  <alan.hayward@arm.com>

        PR gdb/22736:
        * gdb.cp/infcall-nodebug-lib.c: New test.
        * gdb.cp/infcall-nodebug-main.c: New test.
        * gdb.cp/infcall-nodebug.exp: New file.

2018-11-12  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/skip.exp: Add standard_testfile.  Add "skip delete"
        completer tests.

2018-11-09  Tom de Vries  <tdevries@suse.de>

        * gdb.base/msym-lang.c: New test.
        * gdb.base/msym-lang.exp: New file.
        * gdb.base/msym-lang-main.c: New test.

2018-11-08  Tom Tromey  <tom@tromey.com>

        PR gdb/23555:
        PR gdb/23838:
        * gdb.base/warning.exp: New file.

2018-11-08  Jan Beulich  <jbeulich@suse.com>

        * testsuite/gdb.arch/i386-avx512.c,
        testsuite/gdb.arch/i386-avx512.exp: Add 7th test.

2018-11-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-reg-aliases.exp: Handle targets without floating
        point hardware.

2018-11-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/void-type.exp: Rename types, and make var_a an 'int'.
        * gdb.dwarf2/missing-type-name.exp: New file.

2018-11-06  Tom de Vries  <tdevries@suse.de>

        * gdb.base/many-headers.c: New test.
        * gdb.base/many-headers.exp: New file.

2018-11-06  Jim Wilson  <jimw@sifive.com>

        * gdb.base/code_elim.exp: For riscv, set additional_flags
        to include -msmall-data-limit=0.

2018-11-01  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/watch_minus_l: New testcase.

2018-11-01  Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>

        * gdb.arch/aix-sighandle.c: New file.
        * gdb.arch/aix-sighandle.exp: New file.

2018-10-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-reg-aliases.exp: Rewrite to take account of float
        registers being unions.

2018-10-31  Tom de Vries  <tdevries@suse.de>

        * lib/valgrind.exp: New file.
         (vgdb_start, vgdb_stop): New procs, factored out of ...
        * gdb.base/valgrind-bt.exp: ... here, ...
        * gdb.base/valgrind-disp-step.exp: ... here and ...
        * gdb.base/valgrind-infcall.exp: ... here.

2018-10-31  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (get_valueof): Don't output read value in test name.

2018-10-31  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/void-type.c: New file.
        * gdb.dwarf2/void-type.exp: New file.

2018-10-27  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/info_qt.c: New file.
        * gdb.base/info_qt.exp: New file.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.arch/powerpc-htm-regs.c: New file.
        * gdb.arch/powerpc-htm-regs.exp: New file.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.arch/powerpc-tar.c: New file.
        * gdb.arch/powerpc-tar.exp: New file.

2018-10-26  Pedro Franco de Carvalho  <pedromfc@linux.ibm.com>

        * gdb.arch/powerpc-ppr-dscr.c: New file.
        * gdb.arch/powerpc-ppr-dscr.exp: New file.

2018-10-25  Tom de Vries  <tdevries@suse.de>

        * gdb.base/valgrind-db-attach.exp: Rewrite to use vgdb.

2018-10-24  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (gdb_test_multiple): Log wait status on process no
        longer exists error.

2018-10-24  Tom de Vries  <tdevries@suse.de>

        * gdb.base/catch-follow-exec.exp: Rewrite using gdb_test.

2018-10-24  Tom de Vries  <tdevries@suse.de>

        * gdb.base/valgrind-db-attach.exp: Handle removed support for
        --db-attach in valgrind.

2018-10-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/riscv-reg-aliases.c: New file.
        * gdb.arch/riscv-reg-aliases.exp: New file.

2018-10-19  Alan Hayward  <alan.hayward@arm.com>

        * gdb.python/py-cmd.exp: Check for gdb_prompt.

2018-10-19  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/vla-optimized-out.exp: Allow either optimized out or 6.

2018-10-19  Alan Hayward  <alan.hayward@arm.com>

        * gdb.cp/ovldbreak.exp: Fix regexps.

2018-10-19  Alan Hayward  <alan.hayward@arm.com>

        * gdb.compile/compile-cplus-print.exp: Start inferior earlier.

2018-10-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR cli/23785
        * gdb.base/restore.exp: New test to check if "restore" with an
        invalid file doesn't segfault.

2018-10-18  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/bp_inlined_func.exp: Fix capitalized test name.
        * gdb.ada/excep_handle.exp: Same.
        * gdb.ada/mi_string_access.exp: Same.
        * gdb.ada/mi_var_union.exp: Same.
        * gdb.arch/arc-analyze-prologue.exp: Same.
        * gdb.arch/arc-decode-insn.exp: Same.
        * gdb.base/readnever.exp: Same.
        * gdb.fortran/printing-types.exp: Same.
        * gdb.guile/scm-lazy-string.exp: Same.

2018-10-16  Tom de Vries  <tdevries@suse.de>

        PR gdb/23730
        * gdb.base/catch-follow-exec.c: Add copyright notice.
        * gdb.base/catch-follow-exec.exp: Rewrite to use
        gdb_spawn_with_cmdline_opts.  Require gdb-native.

2018-10-12  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.trace/actions-changed.exp: Check for arch support.
        * gdb.trace/actions.exp: Likewise.
        * gdb.trace/ax.exp: Likewise.
        * gdb.trace/backtrace.exp: Likewise.
        * gdb.trace/change-loc.exp: Likewise.
        * gdb.trace/deltrace.exp: Likewise.
        * gdb.trace/ftrace-lock.exp: Check for shlib and arch support.
        * gdb.trace/ftrace.exp: Likewise.
        * gdb.trace/infotrace.exp: Check for arch support.
        * gdb.trace/mi-trace-frame-collected.exp: Likewise.
        * gdb.trace/mi-tracepoint-changed.exp: Likewise.
        * gdb.trace/mi-tsv-changed.exp: Likewise.
        * gdb.trace/packetlen.exp: Likewise.
        * gdb.trace/passc-dyn.exp: Likewise.
        * gdb.trace/passcount.exp: Likewise.
        * gdb.trace/pending.exp: Likewise.
        * gdb.trace/range-stepping.exp: Check for shlib support.
        * gdb.trace/report.exp: Check for arch support.
        * gdb.trace/save-trace.exp: Likewise.
        * gdb.trace/signal.exp: Check for signal support.
        * gdb.trace/tfind.exp: Check for arch support.
        * gdb.trace/trace-break.exp: Check for arch and shlib support.
        * gdb.trace/trace-common.h: Add comment.
        * gdb.trace/trace-condition.exp: Check for shlib and arch support.
        * gdb.trace/trace-enable-disable.exp: Likewise.
        * gdb.trace/trace-mt.exp: Likewise.  Remove redundant untested call.
        * gdb.trace/tracecmd.exp: Check for arch support.
        * gdb.trace/tspeed.exp: Check for shlib and target support.
        * gdb.trace/tstatus.exp: Check for arch support.
        * gdb.trace/tsv.exp: Likewise.
        * gdb.trace/while-dyn.exp: Likewise.
        * gdb.trace/while-stepping.exp: Likewise.
        * lib/trace-support.exp (gdb_trace_common_supports_arch): New.

2018-10-12  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/tspeed.exp: Remove nowarnings.
        (prepare_for_trace_test): Declare "global ipalib".
        * gdb.trace/tspeed.c: Include unistd.h.
        (main): Remove superfluous printf argument.

2018-10-11  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/solib-vanish.exp: Fix regexp not to require a POSIX
        directory prefix on the filename.

2018-10-10  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.gdb/unittest.exp: Update expected message informing that
        selftests have been disabled.
        * gdb.server/unittest.exp: Likewise.

2018-10-09  Tom de Vries  <tdevries@suse.de>

        * lib/gdb.exp (target_supports_scheduler_locking): Replace gdb_start_cmd
        with runto_main.

2018-10-08  Weimin Pan  <weimin.pan@oracle.com>

        PR c++/16841
        * gdb.cp/virtbase2.cc: New file.
        * gdb.cp/virtbase2.exp: New file.

2018-10-06  Tom Tromey  <tom@tromey.com>

        PR python/19399:
        * gdb.python/py-inferior.exp: Add architecture test.

2018-10-06  Tom Tromey  <tom@tromey.com>

        * gdb.base/gnu-ifunc.exp (build): Use standard_output_file.
        * gdb.trace/unavailable-dwarf-piece.exp: Use standard_output_file.

2018-10-06  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-breakpoint.exp (check_last_event): Check location
        of a "throw" catchpoint.

2018-10-06  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/info-proc.exp: Update string expected from "help info
        proc".

2018-10-04  Tom Tromey  <tom@tromey.com>

        * gdb.cp/maint.exp (test_invalid_name): Update expected output.
        * gdb.gdb/complaints.exp (test_short_complaints): Remove.
        (test_initial_complaints, test_empty_complaints): Update.
        * gdb.dwarf2/dw2-stack-boundary.exp: Update.

2018-10-04  Tom Tromey  <tom@tromey.com>

        PR cli/19551:
        * lib/mi-support.exp (mi_gdb_file_cmd): Update.
        * lib/gdb.exp (gdb_file_cmd): Update.
        * gdb.stabs/weird.exp (print_weird_var): Update.
        * gdb.server/solib-list.exp: Update.
        * gdb.multi/remove-inferiors.exp (test_remove_inferiors): Update.
        * gdb.mi/mi-cli.exp: Update.
        * gdb.linespec/linespec.exp: Update.
        * gdb.dwarf2/dw2-stack-boundary.exp: Update.
        * gdb.dwarf2/dw2-objfile-overlap.exp: Update.
        * gdb.cp/cp-relocate.exp: Update.
        * gdb.base/sym-file.exp: Update.
        * gdb.base/relocate.exp: Update.
        * gdb.base/readnever.exp: Update.
        * gdb.base/print-symbol-loading.exp (test_load_core): Update.
        * gdb.base/kill-detach-inferiors-cmd.exp: Update.
        * gdb.base/dbx.exp (gdb_file_cmd): Update.
        * gdb.base/code_elim.exp: Update.
        * gdb.base/break-unload-file.exp (test_break): Update.
        * gdb.base/break-interp.exp (test_attach_gdb): Update.
        * gdb.base/break-idempotent.exp (force_breakpoint_re_set):
        Update.
        * gdb.base/attach.exp (do_attach_tests): Update.
        * gdb.base/sepdebug.exp: Update.
        * gdb.python/py-section-script.exp: Update.

2018-10-04  Tom Tromey  <tom@tromey.com>

        PR cli/22234:
        * gdb.dwarf2/dw2-stack-boundary.exp: Update expected output.
        * gdb.gdb/complaints.exp (test_short_complaints): Update expected
        output.

2018-10-04  Tom Tromey  <tom@tromey.com>

        * gdb.base/attach.exp (test_command_line_attach_run): Use -quiet;
        set width and height to 0.
        (test_command_line_attach_run): Use -quiet.

2018-10-03  Sandra Loosemore  <sandra@codesourcery.com>

        * lib/gdb.exp (skip_ifunc_tests): New.
        * gdb.base/gnu-ifunc.exp: Skip if no ifunc support.  Handle
        other compile failures.
        * gdb.compile/compile-ifunc.exp: Skip if no ifunc support.

2018-10-01  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.arch/i386-avx512.exp: Fix setting of nr_regs based on
        is_amd64_regs_target.

2018-10-01  Alan Hayward  <alan.hayward@arm.com>

        * gdb.arch/aarch64-sighandler-regs.c: New test.
        * gdb.arch/aarch64-sighandler-regs.exp: New file.
        * lib/gdb.exp (skip_aarch64_sve_tests): New proc.

2018-10-01  Markus Metzger  <markus.t.metzger@intel.com>

        * lib/gdb.exp (is_amd64_regs_target): Change assembly to C inline
        assembly.

2018-09-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/frame-selection.exp: New file.
        * gdb.base/frame-selection.c: New file.

2018-09-27  Alan Hayward  <alan.hayward@arm.com>

        * gdb.threads/check-libthread-db.c (thread_routine): Use a
        pthread barrier.
        (main): Likewise.

2018-09-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/large-frame-1.c: New file.
        * gdb.base/large-frame-2.c: New file.
        * gdb.base/large-frame.exp: New file.
        * gdb.base/large-frame.h: New file.

2018-09-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

        PR gdb/20948
        * gdb.base/write_mem.exp: New test.
        * gdb.base/write_mem.c: Likewise.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18852:
        * gdb.python/py-parameter.exp: Add test for parameter that throws
        on "set".

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/17284:
        * gdb.python/py-template.exp (test_template_arg): Add test for
        negative template argument number.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/14062:
        * gdb.python/python.exp: Add test for post_event error.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18170:
        * gdb.python/py-value.exp (test_value_numeric_ops): Add tests to
        convert pointers to int and long.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/20126:
        * gdb.python/py-value.exp (test_value_numeric_ops): Add
        signed-ness conversion tests.

2018-09-23  Tom Tromey  <tom@tromey.com>

        PR python/18352;
        * gdb.python/py-value.exp (test_float_conversion): New proc.
        Use it.

2018-09-20  Hafiz Abid Qadeer  <abidh@codesourcery.com>

        gdb.base/reggroups.exp (fetch_reggroups): Add '_' in match pattern.

2018-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/complete-empty.exp: Skip tab-completion tests if
        no readline.
        * gdb.base/utf8-identifiers.exp: Likewise.
        * gdb.cp/cpcompletion.exp: Likewise.
        * gdb.linespec/cpcompletion.exp: Likewise.
        * gdb.linespec/cpls-abi-tag.exp: Likewise.
        * gdb.linespec/cpls-ops.exp: Likewise.

2018-09-19  Richard Bunt  <richard.bunt@arm.com>
            Chris January  <chris.january@arm.com>

        * gdb.cp/koenig.exp: Extend to test logical short circuiting.
        * gdb.fortran/short-circuit-argument-list.exp: New file.
        * gdb.fortran/short-circuit-argument-list.f90: New test.

2018-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.arch/amd64-invalid-stack-top.exp: Expect optional
        "arch=" keyword when executing "-stack-list-frames".

2018-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.arch/amd64-invalid-stack-middle.exp: Expect optional
        "arch=" keyword when executing "-stack-list-frames".

2018-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.ada/complete.exp: Expect for "@" when doing "complete
        break ada".

2018-09-17  Simon Marchi  <simon.marchi@polymtl.ca>

        PR python/23669
        * gdb.python/python.exp: Test gdb.execute("show commands").

2018-09-16  Tom Tromey  <tom@tromey.com>

        * gdb.base/new-ui.exp (do_execution_tests): Update.
        * gdb.base/dbx.exp (test_breakpoints): Update.

2018-09-14  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdb.exp (gdb_simple_compile): Add proc.
        (is_elf_target): Use gdb_simple_compile.
        (skip_altivec_tests): Likewise.
        (skip_vsx_tests): Likewise.
        (skip_tsx_tests): Likewise.
        (skip_btrace_tests): Likewise.
        (skip_btrace_pt_tests): Likewise.
        (gdb_can_simple_compile): Likewise.
        (gdb_has_argv0): Likewise.
        (gdb_target_symbol_prefix): Likewise.
        (target_supports_scheduler_locking): Likewise.

2018-09-13  Tom Tromey  <tom@tromey.com>

        * Makefile.in (TAGS): Recognize proc_with_prefix and
        gdb_caching_proc.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-progspace.exp: Test the Progspace.objfiles
        method.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-inferior.exp: Add tests for Inferior.progspace
        and a few other Inferior properties when the Inferior is no
        longer valid.

2018-09-13  Tom Tromey  <tom@tromey.com>

        PR rust/23650:
        * gdb.rust/simple.exp: Add test for enum field access error.

2018-09-13  Tom Tromey  <tom@tromey.com>

        PR rust/23626:
        * gdb.rust/simple.rs (EmptyEnum): New type.
        (main): Use it.
        * gdb.rust/simple.exp (test_one_slice): Add empty enum test.

2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-inferior.exp: Test repr() of gdb.Inferior.
        * gdb.python/py-objfile.exp: Test repr() of gdb.Objfile.
        * gdb.python/py-symtab.exp: Update test printing an objfile.

2018-09-12  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-inferior.exp: Test using an invalid gdb.Inferior
        object.

2018-09-12  Alan Hayward  <alan.hayward@arm.com>

        * lib/gdb.exp (gdb_can_simple_compile): Add proc.
        (support_complex_tests): Use gdb_can_simple_compile.
        (is_ilp32_target): Likewise.
        (is_lp64_target): Likewise.
        (is_64_target): Likewise.
        (is_amd64_regs_target): Likewise.
        (is_aarch32_target): Likewise.
        (gdb_int128_helper): Likewise.

2018-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.in (check-parallel-racy): Fix dg-extract-results.sh path.

2018-09-10  Jerome Guitton  <guitton@adacore.com>

        * gdb.ada/same_component_name: Add test for case of tagged record
        with variable-length fields.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/access_to_unbounded_array.exp: New testcase.
        * gdb.ada/access_to_unbounded_array/foo.adb: New file.
        * gdb.ada/access_to_unbounded_array/pack.adb: New file.
        * gdb.ada/access_to_unbounded_array/pack.ads: New file.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/mi_string_access.exp: New testcase.
        * gdb.ada/mi_string_access/bar.adb: New file.
        * gdb.ada/mi_string_access/pck.adb: New file.
        * gdb.ada/mi_string_access/pck.asd: New file.

2018-09-10  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/mi_var_union.exp: New testcase.
        * gdb.ada/mi_var_union/bar.adb: New file.
        * gdb.ada/mi_var_union/pck.adb: New file.
        * gdb.ada/mi_var_union/pck.asd: New file.

2018-09-08  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-prettyprint.exp: Use with_test_prefix.

2018-09-08  Tom Tromey  <tom@tromey.com>

        PR python/16047:
        * gdb.python/py-prettyprint.py (pp_int_typedef3): New class.
        (register_pretty_printers): Register new printer.
        * gdb.python/py-prettyprint.exp (run_lang_tests): Add int_type3
        test.
        * gdb.python/py-prettyprint.c (int_type3): New typedef.
        (an_int_type3): New global.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/expr_with_funcall: New testcase.

2018-09-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/packed_array_assign: New testcase.

2018-09-07  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/watchpoint.exp (test_complex_watchpoint): Extend test
        names, and add test prefixes to make test names unique.

2018-09-05  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/varval.exp: Add test.

2018-09-04  Gary Benson <gbenson@redhat.com>

        * gdb.base/batch-exit-status.exp: Use gdb_test_multiple and expect
        'eof' before 'wait -i'.  Use remote_close and clear_gdb_spawn_id.

2018-08-31  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.rs: Rename second variable "v".

2018-08-30  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/funcargs.c (use_a): New function.
        (recurse): Call use_a.

2018-08-29  Keith Seitz  <keiths@redhat.com>

        * gdb.compile/compile-cplus-anonymous.cc: New file.
        * gdb.compile/compile-cplus-anonymous.exp: New file.
        * gdb.compile/compile-cplus-array-decay.cc: New file.
        * gdb.compile/compile-cplus-array-decay.exp: New file.
        * gdb.compile/compile-cplus-inherit.cc: New file.
        * gdb.compile/compile-cplus-inherit.exp: New file.
        * gdb.compile/compile-cplus-member.cc: New file.
        * gdb.compile/compile-cplus-member.exp: New file.
        * gdb.compile/compile-cplus-method.cc: New file.
        * gdb.compile/compile-cplus-method.exp: New file.
        * gdb.compile/compile-cplus-mod.c: "New" file.
        * gdb.compile/compile-cplus-namespace.cc: New file.
        * gdb.compile/compile-cplus-namespace.exp: New file.
        * gdb.compile/compile-cplus-nested.cc: New file.
        * gdb.compile/compile-cplus-nested.exp: New file.
        * gdb.compile/compile-cplus-print.c: "New" file.
        * gdb.compile/compile-cplus-print.exp: "New" file.
        * gdb.compile/compile-cplus-virtual.cc: New file.
        * gdb.compile/compile-cplus-virtual.exp: New file.
        * gdb.compile/compile-cplus.c: "New" file.
        * gdb.compile/compile-cplus.exp: "New" file.
        * lib/compile-support.exp: New file.

2018-08-16  Gary Benson <gbenson@redhat.com>

        PR gdb/13000:
        * gdb.base/batch-exit-status.exp: New file.
        * gdb.base/batch-exit-status.good-commands: Likewise.
        * gdb.base/batch-exit-status.bad-commands: Likewise.

2018-08-29  Alan Hayward  <alan.hayward@arm.com>

        * gdb.base/infcall-nested-structs.c (struct struct01): Remove.
        (struct struct02): Likewise.
        (struct struct03): Likewise.
        (struct struct04): Likewise.
        (struct struct_01_01): New struct.
        (struct struct_01_02): Likewise.
        (struct struct_01_03): Likewise.
        (struct struct_01_04): Likewise.
        (struct struct_02_01): Likewise.
        (struct struct_02_02): Likewise.
        (struct struct_02_03): Likewise.
        (struct struct_02_04): Likewise.
        (struct struct_04_01): Likewise.
        (struct struct_04_02): Likewise.
        (struct struct_04_03): Likewise.
        (struct struct_04_04): Likewise.
        (struct struct_05_01): Likewise.
        (struct struct_05_02): Likewise.
        (struct struct_05_03): Likewise.
        (struct struct_05_04): Likewise.
        (cmp_struct01): Remove function.
        (cmp_struct02): Likewise.
        (cmp_struct03): Likewise.
        (cmp_struct04): Likewise.
        (cmp_struct_01_01): Add Function.
        (cmp_struct_01_02): Likewise.
        (cmp_struct_01_03): Likewise.
        (cmp_struct_01_04): Likewise.
        (cmp_struct_02_01): Likewise.
        (cmp_struct_02_02): Likewise.
        (cmp_struct_02_03): Likewise.
        (cmp_struct_02_04): Likewise.
        (cmp_struct_04_01): Likewise.
        (cmp_struct_04_02): Likewise.
        (cmp_struct_04_03): Likewise.
        (cmp_struct_04_04): Likewise.
        (cmp_struct_05_01): Likewise.
        (cmp_struct_05_02): Likewise.
        (cmp_struct_05_03): Likewise.
        (cmp_struct_05_04): Likewise.
        (call_all): Add new structs.
        * gdb.base/infcall-nested-structs.exp: Likewise.

2018-08-27  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * gdb.python/py-framefilter-mi.exp: Update regexp to
        check for "arch" field in frame output.

2018-08-23  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/dw2-ranges-func.c: New file.
        * gdb.dwarf2/dw2-ranges-func.exp: New file.

2018-08-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/term.exp: Compare terminal settings with values from
        the inferior.
        * gdb.base/term.c: Get and set terminal settings.

2018-08-22  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * lib/mi-support.exp (mi_expect_stop): Update regexp to
        accommodate new "arch" field in frame output.
        * gdb.mi/mi-return.exp: Likewise.
        * gdb.mi/mi-stack.exp: Likewise.
        * gdb.mi/mi-syn-frame.exp: Likewise.
        * gdb.mi/user-selected-context-sync.exp: Likewise.

2018-08-19  Michael Spang  <spang@google.com>

        PR gdb/11786
        * gdb.base/gcore-tls-pie.c: New file.
        * gdb.base/gcore-tls-pie.exp: New file.

2018-08-18  Kevin Buettner  <kevinb@redhat.com>

        * lib/dwarf.exp: Add support for DW_OP_GNU_variable_value.
        * gdb.dwarf2/varval.c: New file.
        * gdb.dwarf2/varval.exp: New file.

2018-08-17  Alan Hayward  <alan.hayward@arm.com>

        PR gdb/18931
        * gdb.arch/aarch64-fp.c (main): Fix asm registers.

2018-08-16  Keith Seitz  <keiths@redhat.com>

        * gdb.compile/compile.exp: Use gdb_test_no_output for "compile code"
        tests expected to pass.

2018-08-14  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * gdb.mi/mi-disassemble.exp (test_disassembly_only): Add tests for
        -data-disassemble -a.
        (test_disassembly_bogus_args): Likewise.

2018-08-14  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/list-thread-groups-available.exp: Update test regexp.

2018-08-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/vla-optimized-out.exp: Add new test.

2018-08-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/vla-optimized-out-o3.exp: Delete.
        * gdb.base/vla-optimized-out-o3-strict.exp: Delete.
        * gdb.base/vla-optimized-out.exp: Extend to cover all of the
        deleted tests.

2018-08-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/18050:
        * gdb.server/extended-remote-restart.c: New file.
        * gdb.server/extended-remote-restart.exp: New file.

2018-08-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.fortran/nested-funcs.exp: Replace "set index = 42" with
        "set variable index = 42".

2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>

        * boards/index-cache-gdb.exp: New file.
        * gdb.dwarf2/index-cache.exp: New file.
        * gdb.dwarf2/index-cache.c: New file.
        * gdb.base/maint.exp: Check if we are using the index cache.

2018-08-07  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * Makefile.in (saw_dash_j): Allow for GNU make 4.2+ passing -jN in
        MAKEFLAGS.

2018-08-06  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

        * dg-extract-results.sh: Move to toplevel contrib.
        * Makefile.in (check-parallel): Reflect dg-extract-results.sh move.
        * Makefile.in (check-parallel-racy): Likewise.

2018-08-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp (target_supports_scheduler_locking): New proc.
        * gdb.mi/mi-cmd-param-changed.exp: Only run scheduler locking
        tests if the target supports scheduler locking.

2018-08-04  Tom de Vries  <tdevries@suse.de>

        * gdb.python/py-rbreak.exp: Fix rbreak regexp.

2018-08-02  Tom Tromey  <tom@tromey.com>

        PR symtab/16842.
        * gdb.cp/temargs.exp: Test "info address" of a template
        parameter.

2018-07-31  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * gdb.python/py-mi-var-info-path-expression.c: New file.
        * gdb.python/py-mi-var-info-path-expression.py: New file.
        * gdb.python/py-mi-var-info-path-expression.exp: New file.

2018-07-30  Sergio Durigan Junior  <sergiodj@redhat.com>

        * lib/gdbserver-support.exp (gdbserver_start): Match any kind of
        error after "cannot resolve name" string.

2018-07-28  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.trace/tspeed.exp: Only call gdb_load_shlib after gdb has
        started.
        * lib/gdb.exp (gdb_load_shlib): Call perror if GDB is not running.

2018-07-28  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-optimized-out-o3-strict.exp: New file.

2018-07-26  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-optimized-out.c: Add comment about origin of test-case.

2018-07-26  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Add check that dwarf unwinders control flag
        is visible.

2018-07-26  Tom de Vries  <tdevries@suse.de>

        PR breakpoints/23366
        * gdb.base/catch-follow-exec.c: New test.
        * gdb.base/catch-follow-exec.exp: New file.

2018-07-25  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-optimized-out-o3.exp: New file.  Reuse
        vla-optimized-out.c.

2018-07-25  Jan Vrany  <jan.vrany@fit.cvut.cz>

        * gdb.mi/mi-breakpoint-location-ena-dis.cc: New file.
        * gdb.mi/mi-breakpoint-location-ena-dis.exp: New file.

2018-07-20  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-optimized-out.c: Make noclone attribute conditional on
        NOCLONE macro.
        * gdb.base/vla-optimized-out.exp: Use additional_flags -DNOCLONE.

2018-07-19  Tom de Vries  <tdevries@suse.de>

        * gdb.mi/list-thread-groups-available.exp (cores_re): Fix quoting in
        regular expression.

2018-07-18  Tom de Vries  <tdevries@suse.de>

        * gdb.base/vla-optimized-out.c: New test.
        * gdb.base/vla-optimized-out.exp: New file.

2018-07-13  Sergio Durigan Junior  <sergiodj@redhat.com>

        * lib/gdbserver-support.exp (gdbserver_start): Expect for the
        message "No address associated with hostname" when gdbserver
        cannot resolve the hostname.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.threads/pthreads.exp: Test qcs FLAG arguments.
        Add some test prefixes to make tests unique.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/frameapply.c: New file.
        * gdb.base/frameapply.exp: New file.

2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/skip.exp: Update expected error message.

2018-07-11  Sergio Durigan Junior  <sergiodj@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>
            Paul Fertser  <fercerpav@gmail.com>
            Tsutomu Seki  <sekiriki@gmail.com>

        * README (Testsuite Parameters): Mention new 'GDB_TEST_SOCKETHOST'
        parameter.
        * boards/native-extended-gdbserver.exp: Do not set 'sockethost'
        by default.
        * boards/native-gdbserver.exp: Likewise.
        * gdb.server/run-without-local-binary.exp: Improve regexp used
        for detecting when a remote debugging connection succeeds.
        * gdb.server/server-connect.exp: New file.
        * lib/gdbserver-support.exp (gdbserver_default_get_comm_port):
        Do not prefix the port number with ":".
        (gdbserver_start): New global GDB_TEST_SOCKETHOST.  Implement
        support for detecting and using it.  Add '$debughost_gdbserver'
        to the list of arguments used to start gdbserver.  Handle case
        when gdbserver cannot resolve a network name.

2018-07-11  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR c++/23373
        * gdb.base/ptype-offsets.cc (struct static_member): New
        struct.
        (main) <stmember>: New variable.
        * gdb.base/ptype-offsets.exp: Add test for printing a struct
        with a static member in it.

2018-07-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/watchpoint-reuse-slot.exp: Test with hardware
        watchpoints enabled and disabled.

2018-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/examine-backward.exp: Still run tests around address
        0x0, even if address 0x0 is not readable.  Update the pattern for
        matching address 0x0 in expected output.

2018-07-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/share-env-with-gdbserver.c (main): Add call to
        malloc/free.

2018-07-04  Tom de Vries  <tdevries@suse.de>

        * gdb.dwarf2/dw2-error.exp: Update expected error message.

2018-07-02  Maciej W. Rozycki  <macro@mips.com>

        PR tdep/8282
        * gdb.arch/mips-disassembler-options.exp: New test.
        * gdb.arch/mips-disassembler-options.s: New test source.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * gdb.threads/names.exp: Adjust expected "info threads" output.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * gdb.opt/inline-break.exp (line number, address): Add "info
        break" tests.

2018-06-29  Pedro Alves  <palves@redhat.com>

        * gdb.opt/inline-break.c (func1): Add "break here" marker.
        * gdb.opt/inline-break.exp: Test setting breakpoints by line
        number and address and running to them.

2018-06-29  Richard Bunt  <richard.bunt@arm.com>

        * gdb.base/watchpoint-hw-attach.exp: Remove unstable output.

2018-06-28  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * lib/compiler.c: Remove executable permission flag.

2018-06-28  Richard Bunt  <richard.bunt@arm.com>

        * gdb.base/watchpoint-hw-attach.c (main): Remove unneeded
        code.
        * gdb.base/watchpoint-hw-attach.exp: Break in outermost frame.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * gdb.base/relocate.exp: Add test for "add-symbol-file -o ".

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * gdb.base/relocate.exp: Test add-symbol-file behavior when the
        address argument is omitted.

2018-06-28  Petr Tesarik  <ptesarik@suse.cz>

        * gdb.base/relocate.exp: Add test for "symbol-file -o ".

2018-06-27  Omair Javaid  <omair.javaid@linaro.org>

        PR gdb/21695
        * gdb.base/infoline-reloc-main-from-zero.exp: New test.
        * gdb.base/infoline-reloc-main-from-zero.c: New file.

2018-06-26  Tom Tromey  <tom@tromey.com>

        PR rust/22574:
        * gdb.rust/simple.exp (test_one_slice): Add ptype/o tests.
        * gdb.rust/simple.rs (struct SimpleLayout): New.

2018-06-22  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/jit-reader.exp (jit_reader_test): Expect spaces in
        "info registers" output.

2018-06-21  Richard Bunt  <richard.bunt@arm.com>

        * gdb.base/watchpoint-hw-attach.c: New test.
        * gdb.base/watchpoint-hw-attach.exp: New file.

2018-06-20  Simon Marchi  <simon.marchi@ericsson.com>

        * boards/cc-with-tweaks.exp: Don't call cc-with-tweaks.sh
        through /bin/sh.
        * boards/dwarf4-gdb-index.exp: Likewise.
        * boards/fission-dwp.exp: Likewise.

2018-06-20  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.base/float128.exp: Add comment and improved fail message
        to the failure case of "print large128" test.

2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>

        * configure.ac: Remove AC_PREREQ.
        * configure: Re-generate.

2018-06-19  Pedro Alves  <palves@redhat.com>

        * gdb.opt/inline-break.c (func_inline_callee, func_inline_caller)
        (func_extern_caller): New.
        (main): Call func_extern_caller.
        * gdb.opt/inline-break.exp: Add tests for inline frame skipping
        logic change.

2018-06-18  Weimin Pan  <weimin.pan@oracle.com>

        PR gdb/16841
        * gdb.cp/typedef-base.cc: New file.
        * gdb.cp/typedef-base.exp: New file.

2018-06-18  Tom de Vries  <tdevries@suse.de>

        * gdb.ada/bp_inlined_func.exp: Allow 5 breakpoint locations.

2018-06-16  Andrew Burgess  <andrew.burgess@embecosm.com>
            Richard Bunt <Richard.Bunt@arm.com>

        * gdb.threads/attach-slow-waitpid.c: New file.
        * gdb.threads/attach-slow-waitpid.exp: New file.
        * gdb.threads/slow-waitpid.c: New file.

2018-06-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/fork-running-state.c: Include <errno.h>.
        (exit_if_relative_exits): New.
        (fork_child): If 'exit_if_relative_exits' is true, exit if the parent
        exits.
        (fork_parent): If 'exit_if_relative_exits' is true, exit if the
        child exits.

2018-06-14  Tom de Vries  <tdevries@suse.de>

        PR cli/22573
        * gdb.base/finish-pretty.c: New test.
        * gdb.base/finish-pretty.exp: New file.

2018-06-14  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/selftest.exp (test_with_self): Use multi_line to build
        gdb's expected startup output.

2018-06-14  Pedro Alves  <palves@redhat.com>

        * lib/selftest-support.exp (selftest_setup): Remove inlined
        function handling.

2018-06-14  Tom de Vries  <tdevries@suse.de>

        * lib/selftest-support.exp (selftest_setup): Allow function arguments in
        matching of breakpoint printing.

2018-06-13  Tom de Vries  <tdevries@suse.de>

        PR testsuite/23269
        * gdb.base/fork-running-state.c (main): Move setting of alarm ...
        (fork_child): ... here, and ...
        (fork_parent): ... here.

2018-06-12  Tom de Vries  <tdevries@suse.de>

        * gdb.gdb/selftest.exp (test_with_self): Update gdb startup text.

2018-06-12  Andrew Burgess  <andrew.burgess@embecosm.com>
            Stephen Roberts  <stephen.roberts@arm.com>

        * gdb.threads/multiple-successive-infcall.exp: Remove kfail case,
        rewrite test to describe action performed, rather than possible
        failure.

2018-06-08  Gary Benson <gbenson@redhat.com>

        * gdb.threads/check-libthread-db.exp: New file.
        * gdb.threads/check-libthread-db.c: Likewise.

2018-06-05  Tom Tromey  <tom@tromey.com>

        * gdb.base/default.exp: Update expected "show version" output.

2018-06-05  Tom Tromey  <tom@tromey.com>

        PR cli/12326:
        * gdb.cp/static-print-quit.exp: Update.
        * lib/gdb.exp (pagination_prompt): Update.
        * gdb.base/page.exp: Use pagination_prompt.  Add new tests.
        * gdb.python/python.exp: Update.

2018-06-04  Joel Brobecker  <brobecker@adacore.com>

        * gdb.mi/list-thread-groups-no-inferior.exp: New testcase.

2018-06-01  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/bp_fun_addr: New testcase.

2018-06-01  Tom Tromey  <tom@tromey.com>

        * gdb.xml/tdesc-regs.exp (load_description): Update expected
        results.
        * gdb.dwarf2/method-ptr.exp: Set language to C++.
        * gdb.dwarf2/member-ptr-forwardref.exp: Set language to C++.
        * gdb.cp/typeid.exp (do_typeid_tests): Update type_re.
        * gdb.base/maint.exp (maint_pass_if): Update.

2018-05-31  Maciej W. Rozycki  <macro@mips.com>

        * gdb.base/endian.exp: New test.
        * gdb.base/endian.c: New test source.

2018-05-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        PR gdb/23203
        * gdb.base/bt-selected-frame.c: New file.
        * gdb.base/bt-selected-frame.exp: New file.
        * lib/gdb.exp (get_current_frame_number): New function.

2018-05-24  Maciej W. Rozycki  <macro@mips.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.threads/tls-core.c: Include <stdlib.h>
        (thread_proc): Call `abort'.
        * gdb.threads/tls-core.exp: Generate a core with core_find too.
        (tls_core_test): New procedure, bits factored out from ...
        (top level): ... here.  Test both native cores and gcore cores.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/complaints.exp (test_initial_complaints): Simplify.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/complaints.exp (test_initial_complaints): Don't mention
        symfile_complaints.
        (test_short_complaints): Likewise.
        (test_empty_complaints): Likewise.
        (test_initial_complaints): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/complaints.exp (test_empty_complaints): Update.

2018-05-23  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/complaints.exp (test_serial_complaints): Remove.
        (test_short_complaints): Update.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * gdb.base/remote.exp: Only gdb_start after compiling the
        testcase.  Issue "disconnect" before testing "set remote" command
        defaults.  Issue clean_restart before running to main.

2018-05-22  Pedro Alves  <palves@redhat.com>

        * gdb.base/remote.exp: Adjust expected output of "show remote
        memory-write-packet-size".  Add tests for "set remote
        memory-write-packet-size 0" and "set remote
        memory-write-packet-size fixed/limit".

2018-05-22  Pedro Alves  <palves@redhat.com>

        PR gdb/22973
        * gdb.base/utf8-identifiers.c: New file.
        * gdb.base/utf8-identifiers.exp: New file.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * gdb.arch/powerpc-fpscr-gcore.exp: New file.

2018-05-22  Pedro Franco de Carvalho  <pedromfc@linux.vnet.ibm.com>

        * gdb.arch/powerpc-vsx-gcore.exp: New file.

2018-05-18  Tom Tromey  <tom@tromey.com>

        * gdb.base/ptype-offsets.exp: Update.

2018-05-17  Keith Seitz  <keiths@redhat.com>

        * gdb.ada/bp_inlined_func.exp: Update inlined frame locations
        in expected breakpoint stop locations.
        * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to
        move to proper scope to test variable values.
        * gdb.opt/inline-break.c (inline_func1, not_inline_func1)
        (inline_func2, not_inline_func2, inline_func3, not_inline_func3):
        New functions.
        (main): Call not_inline_func3.
        * gdb.opt/inline-break.exp: Start inferior and set breakpoints at
        inline_func1, inline_func2, and inline_func3.  Test that when each
        breakpoint is hit, GDB properly reports both the stop location
        and the backtrace. Repeat tests for temporary breakpoints.

2018-05-15  Maciej W. Rozycki  <macro@mips.com>

        * gdb.server/server-kill.exp: Verify whether `server_pid' exists
        rather then trying to access it in determining whether the PID
        of `gdbserver' could have been retrieved.

2018-05-08  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-init-x87-values.S: New file.
        * gdb.arch/amd64-init-x87-values.exp: New file.

2018-05-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/watchpoint-unaligned.exp: Use skip_hw_watchpoint_tests.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR python/22730:
        * gdb.python/python.exp: Test multi-line execute.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR python/22731:
        * gdb.python/py-breakpoint.exp: Test setting breakpoint commands.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR gdb/11750:
        * gdb.base/define.exp: Test defining a user command inside a user
        command.
        * gdb.base/commands.exp (define_if_without_arg_test): Test "define".

2018-05-04  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves <palves@redhat.com>

        PR breakpoints/19806 and support for PR external/20207.
        * gdb.base/watchpoint-unaligned.c: New file.
        * gdb.base/watchpoint-unaligned.exp: New file.

2018-05-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Make test names unique, use
        test_prefix_command_help to test 'help maint info', and remove
        repeated test of 'help maint'.

2018-05-04  Tom Tromey  <tom@tromey.com>

        PR gdb/22619:
        * gdb.base/long_long.exp (gdb_test_long_long): Add test for repeat
        behavior.

2018-05-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: Process output from 'maint print registers'
        line at a time.

2018-05-04  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/mi-support.exp (mi_run_cmd_full): Fix regexp and add a
        timeout.

2018-05-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/callfuncs.exp (fetch_all_registers): Add riscv register
        filter pattern.

2018-05-02  Pedro Alves  <palves@redhat.com>

        * gdb.base/breakpoint-in-ro-region.exp: Adjust to to_resume and
        to_log_command renames.
        * gdb.base/sss-bp-on-user-bp-2.exp: Likewise.

2018-05-02  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-parameter.exp: Set test message.

2018-05-02  Tom Tromey  <tom@tromey.com>

        PR python/20084:
        * gdb.python/py-parameter.exp: Add PARAM_ZUINTEGER and
        PARAM_ZUINTEGER_UNLIMITED tests.

2018-04-28  Dan Robertson  <danlrobertson89@gmail.com>

        PR rust/23124
        * gdb.rust/expr.exp: Test that the unit type is correctly parsed
        when casting.

2018-04-30  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-type.exp: Check align attribute.
        * gdb.python/py-type.c: New "aligncheck" global.

2018-04-30  Tom Tromey  <tom@tromey.com>

        PR exp/17095:
        * gdb.dwarf2/dw2-align.exp: New file.
        * gdb.cp/align.exp: New file.
        * gdb.base/align.exp: New file.
        * lib/gdb.exp (gdb_int128_helper): New proc.
        (has_int128_c, has_int128_cxx): New caching procs.

2018-04-27  Tom Tromey  <tom@tromey.com>

        PR rust/22545:
        * gdb.rust/simple.exp: Add inclusive range tests.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * gdb.base/gnu-ifunc.exp (set-break): Test that GDB resolves
        ifunc breakpoint locations correctly of ifunc breakpoints set
        while the program resolves the ifunc.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * gdb.base/gnu-ifunc-final.c: New file.
        * gdb.base/gnu-ifunc.c (final): Delete, moved to gnu-ifunc-final.c.
        * gdb.base/gnu-ifunc.exp (executable): Delete.
        (staticexecutable): Adjust.
        (lib_opts, exec_opts): Delete.
        (make_binsuffix, build, set-break): New procedures.
        (misc_tests): New, with tests factored out from the top level.
        (top level): Test different combinations of ifunc resolver name,
        resolver with and with debug info, and ifunc target with and
        without debug info.  Wrap static tests with with_target_prefix.

2018-04-26  Pedro Alves  <palves@redhat.com>

        * gdb.compile/compile-ifunc.exp: Also expect "function has unknown
        return type" warnings.

2018-04-25  Pedro Alves  <palves@redhat.com>

        * gdb.base/hook-stop.exp: Expect "killed" instead of "has been
        killed".
        * gdb.base/kill-after-signal.exp: Likewise.
        * gdb.threads/kill.exp: Likewise.

2018-04-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/attach-non-pgrp-leader.exp: Adjust 'Detaching...'
        regexps to expect for '[Inferior ... detached]' as well.
        * gdb.base/attach.exp: Likewise.
        * gdb.base/catch-syscall.exp (check_for_program_end): Adjust
        "gdb_continue_to_end".
        (test_catch_syscall_with_wrong_args): Likewise.
        * gdb.base/foll-fork.exp: Adjust regexps to match '[' and
        ']'.  Don't set 'verbose' on.
        * gdb.base/foll-vfork.exp: Likewise.
        * gdb.base/fork-print-inferior-events.c: New file.
        * gdb.base/fork-print-inferior-events.exp: New file.
        * gdb.base/hook-stop.exp: Adjust regexps to expect for new
        '[Inferior ... has been killed]' message.
        * gdb.base/kill-after-signal.exp: Likewise.
        * gdb.base/solib-overlap.exp: Adjust regexps to expect for new
        detach message.
        * gdb.threads/kill.exp: Adjust regexps to expect for new kill
        message.
        * gdb.threads/clone-attach-detach.exp: Adjust 'Detaching...'
        regexps to expect for '[Inferior ... detached]' as well.
        * gdb.threads/process-dies-while-detaching.exp: Likewise.

2018-04-24  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/23104
        * gdb.base/info-shared.exp: Replace libs=-ldl with shlib_load.

2018-04-22  Rajendra SY  <rajendra.sy@gmail.com>

        PR gdb/23095
        * gdb.base/break-probes.exp: Pass shlib_load to
        prepare_for_testing.  Set normal_bp to r_debug_state if target is
        bsd.

2018-04-19  Richard Bunt  <richard.bunt@arm.com>

        * gdb.threads/multiple-successive-infcall.c: New test.
        * gdb.threads/multiple-successive-infcall.exp: New file.

2018-04-17  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.rs (Union): New type.
        (main): New local "u".
        * gdb.rust/simple.exp (test_one_slice): Add new test case.

2018-04-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/dbx.exp (test_whereis): Adjust regexp to added line
        number information in output of "whereis" command.
        * gdb.base/info-fun.exp: Likewise, for "info fun" command.

2018-04-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.ada/info_types.exp: Adjust expected output to the line
        numbers now printed by "info var/func/type".
        * gdb.base/completion.exp: Likewise.
        * gdb.base/included.exp: Likewise.
        * gdb.cp/cp-relocate.exp: Likewise.
        * gdb.cp/cplusfuncs.exp: Likewise.
        * gdb.cp/namespace.exp: Likewise.
        * gdb.dwarf2/dw2-case-insensitive.exp: Likewise.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/cpu.exp: New.

2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.base/step-indirect-call-thunk.exp: New.
        * gdb.base/step-indirect-call-thunk.c: New.
        * gdb.reverse/step-indirect-call-thunk.exp: New.
        * gdb.reverse/step-indirect-call-thunk.c: New.

2018-04-11  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/pie-fork.c: New file.
        * gdb.base/pie-fork.exp: New file.

2018-04-11  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Add test for ".." struct initializer.

2018-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/fork-running-state.c (fork_child): Don't exit if parent
        exits.  Instead loop running forever.
        (fork_parent): Run forever too.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/mi-stack.exp (test_stack_frame_listing): Use
        mi_continue_to_line.
        * gdb.mi/mi-stack.c (callee4): Add comment.

2018-04-07  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/mi-stack.exp: Fix indentation.

2018-04-07  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/22979
        * gdb.arch/amd64-osabi.exp: New file.

2018-04-07  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/22980
        * gdb.base/osabi.exp: New file.

2018-04-02  Weimin Pan  <weimin.pan@oracle.com>

        * gdb.cp/static-typedef-print.exp: New file.
        * gdb.cp/static-typedef-print.cc: New file.

2018-03-27  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/varsize_limit: New testcase.

2018-03-27  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/maint_with_ada.exp: Remove PR gdb/22670 setup_kfail.

        * gdb.ada/notcplusplus: New testcase.

        * gdb.base/c-linkage-name.c: New file.
        * gdb.base/c-linkage-name.exp: New testcase.

2018-03-26  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-framefilter.exp: Add test for KeyboardInterrupt.
        * gdb.python/py-framefilter.py (name_error): New global.
        (ErrorInName.function): Use name_error.

2018-03-26  Tom Tromey  <tom@tromey.com>

        PR backtrace/15582:
        * gdb.python/py-framefilter.exp: Add "bt hide" test.

2018-03-23  Keith Seitz  <keiths@redhat.com>

        PR c++/22968
        * gdb.cp/subtypes.exp: New file.
        * gdb.cp/subtypes.h: New file.
        * gdb.cp/subtypes.cc: New file.
        * gdb.cp/subtypes-2.cc: New file.

2018-03-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-disp-step-avx.S: Add '_start' label.
        (done): Call '_exit' not 'exit' to avoid atexit handlers.
        * gdb.arch/amd64-disp-step-avx.exp: Pass -static, and
        -nostartfiles when compiling the test.  Confirm that all registers
        xmm0 to xmm15 are initially 0, and that xmm1 to xmm15 are 0 after.

2018-03-23  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-disp-step-avx.exp: Remove unneeded assembler flag
        option, syntax was wrong anyway.
        * gdb.arch/arm-disp-step.exp: Likewise.
        * gdb.arch/sparc64-regs.exp: Likewise.
        * gdb.arch/amd64-disp-step.exp: Remove unneeded assembler flag
        option, syntax was wrong anyway, switch to use
        prepare_for_testing.
        * gdb.arch/i386-disp-step.exp: Likewise.

2018-03-23  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.ada/exec_changed.exp: Replace "target_info exists
        use_gdb_stub" by "use_gdb_stub".
        * gdb.ada/start.exp: Likewise.
        * gdb.base/async-shell.exp: Likewise.
        * gdb.base/attach-pie-misread.exp: Likewise.
        * gdb.base/attach-wait-input.exp: Likewise.
        * gdb.base/break-entry.exp: Likewise.
        * gdb.base/break-interp.exp: Likewise.
        * gdb.base/dprintf-detach.exp: Likewise.
        * gdb.base/nostdlib.exp: Likewise.
        * gdb.base/solib-nodir.exp: Likewise.
        * gdb.base/statistics.exp: Likewise.
        * gdb.base/testenv.exp: Likewise.
        * gdb.mi/mi-exec-run.exp: Likewise.
        * gdb.mi/mi-start.exp: Likewise.
        * gdb.multi/dummy-frame-restore.exp: Likewise.
        * gdb.multi/multi-arch-exec.exp: Likewise.
        * gdb.multi/multi-arch.exp: Likewise.
        * gdb.multi/tids.exp: Likewise.
        * gdb.multi/watchpoint-multi.exp: Likewise.
        * gdb.python/py-events.exp: Likewise.
        * gdb.threads/attach-into-signal.exp: Likewise.
        * gdb.threads/attach-stopped.exp: Likewise.
        * gdb.threads/threadapply.exp: Likewise.
        * lib/selftest-support.exp: Likewise.

2018-03-22  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/info-proc.exp: Add test for "info proc cmdline".

2018-03-20  Stephen Roberts  <stephen.roberts@arm.com>

        * gdb.perf/template-breakpoints.cc: New file.
        * gdb.perf/template-breakpoints.exp: New file.
        * gdb.perf/template-breakpoints.py: New file.

2018-03-19  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.rs (main): Add local variables field1, field2,
        y0.
        * gdb.rust/simple.exp: Test bare identifier form of struct
        initializer.

2018-03-19  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/observer.exp: Remove.

2018-03-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.trace/actions-changed.exp: Call gdb_breakpoint with the
        "qualified" option when setting breakpoints.
        * gdb.trace/backtrace.exp: Likewise.
        * gdb.trace/circ.exp: Likewise.
        * gdb.trace/collection.exp: Likewise.
        * gdb.trace/disconnected-tracing.exp: Likewise.
        * gdb.trace/ftrace-lock.exp: Likewise.
        * gdb.trace/ftrace.exp: Likewise.
        * gdb.trace/infotrace.exp: Likewise.
        * gdb.trace/packetlen.exp: Likewise.
        * gdb.trace/passc-dyn.exp: Likewise.
        * gdb.trace/qtro.exp: Likewise.
        * gdb.trace/read-memory.exp: Likewise.
        * gdb.trace/report.exp: Likewise.
        * gdb.trace/signal.exp: Likewise.
        * gdb.trace/status-stop.exp: Likewise.
        * gdb.trace/strace.exp: Likewise.
        * gdb.trace/tfind.exp: Likewise.
        * gdb.trace/trace-break.exp: Likewise.
        * gdb.trace/trace-condition.exp: Likewise.
        * gdb.trace/trace-mt.exp: Likewise.
        * gdb.trace/tstatus.exp: Likewise.
        * gdb.trace/tsv.exp: Likewise.
        * gdb.trace/unavailable-dwarf-piece.exp: Likewise.
        * gdb.trace/unavailable.exp: Likewise.
        * gdb.trace/while-dyn.exp: Likewise.

2018-03-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.trace/tspeed.exp: Add invocation of gdb_load_shlib to ensure
        that libinproctrace is copied to the target.

2018-03-14  Tom Tromey  <tom@tromey.com>

        PR cli/14977:
        * gdb.base/printcmds.exp (test_printf): Add printf test of %s with
        a null pointer.
        * gdb.base/wchar.exp: Likewise.

2018-03-14  Tom Tromey  <tom@tromey.com>

        PR cli/19918:
        * gdb.base/printcmds.exp (test_printf): Add printf test using '-'
        flag.

2018-03-08  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/22841
        * boards/remote-stdio-gdbserver.exp (${board}_file): Pass
        "target" to remote_exec.

2018-03-08  Simon Marchi  <simon.marchi@polymtl.ca>

        PR gdb/22841
        * boards/gdbserver-base.exp (${board}_file, ${board}_download,
        ${board}_upload): Remove.

2018-03-07  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.cp/watch-cp.cc: New test.
        * gdb.cp/watch-cp.exp: New file.

2018-03-06  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/infcall-nested-structs.exp: New file.
        * gdb.base/infcall-nested-structs.c: New file.
        * gdb.base/float.exp: Add riscv support.

2018-03-02  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.dlang/watch-loc.c: Use %progbits instead of @progbits.
        * gdb.mi/dw2-ref-missing-frame-func.c: Likewise.

2018-02-28  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.server/abspath.exp: New file.
        * lib/gdb.exp (with_cwd): New procedure.

2018-02-28  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_is_target_1): Add prompt_regexp parameter and
        use it.
        (gdb_is_target_remote_prompt): New proc.
        (gdb_is_target_remote): Use gdb_is_target_remote_prompt.
        (gdb_is_target_native): Pass prompt parameter to
        gdb_is_target_1.

2018-02-26  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/load-command.c: New file.
        * gdb.base/load-command.exp: New file.
        * lib/gdb.exp (gdb_is_target_remote_prompt): Rename to...
        (gdb_is_target_1): ...this, and generalize for other targets
        than just remote.
        (gdb_is_target_remote): Use gdb_is_target_1.
        (gdb_is_target_native): use gdb_is_target_1.

2018-02-26  Tom Tromey  <tom@tromey.com>

        PR python/16497:
        * gdb.python/py-framefilter.exp: Update test.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/variant.c: New file.
        * gdb.dwarf2/variant.exp: New file.

2018-02-26  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Accept more possible results in enum test.

2018-02-25  Simon Marchi  <simon.marchi@polymtl.ca>

        * lib/cp-support.exp (cp_test_ptype_class): Move space inside
        parentheses.

2018-02-23  Maciej W. Rozycki  <macro@mips.com>

        * lib/cp-support.exp (cp_test_ptype_class): Fix a typo in the
        name of a variable: $actual_linejj -> $actual_line.

2018-02-21  John Baldwin  <jhb@FreeBSD.org>

        * gdb.arch/amd64-i386-address.exp: Fix a typo.

2018-02-20  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/buffer-size.exp: Do not force BTS.

2018-02-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/bp-cmds-continue-ctrl-c.exp (do_test): Test "bt" after
        getting a "Quit".

2018-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * lib/gdb.exp (skip_btrace_pt_tests): Update expected error message.
        Fix test name.

2018-02-07  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.cp/m-static.exp: Check type of optimized out static
        member.

2018-02-03  Andrew Burgess  <andrew.burgess@embecosm.com>

        * config/sid.exp (gdb_target_sid): Remove use of cleanup.
        * config/sim.exp (gdb_target_sim): Remove use of cleanup.

2018-02-01  Simon Marchi  <simon.marchi@polymtl.ca>
            Leszek Swirski  <leszeks@google.com>

        * gdb.python/py-prettyprint.c
        (struct to_string_returns_value_inner,
        struct to_string_returns_value_wrapper): New.
        (main): Add tsrvw variable.
        * gdb.python/py-prettyprint.py (ToStringReturnsValueInner,
        ToStringReturnsValueWrapper): New classes.
        (register_pretty_printers): Register new pretty-printers.
        * gdb.python/py-prettyprint.exp (run_lang_tests): Test printing
        recursive pretty printer.
        * gdb.python/py-mi.exp: Likewise.

2018-02-01  Leszek Swirski  <leszeks@google.com>

        * gdb.cp/filename.cc, gdb.cp/filename.exp: Test that member
        functions with the same name as an include file are parsed
        correctly.

2018-02-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/attach.exp (do_attach_tests): Set sysroot to
        "\[^\r\n\]*".

2018-01-31  Nikola Prica  <nikola.prica@rt-rk.com>

        * gdb.arch/powerpc-prologue-frame.s: New file.
        * gdb.arch/powerpc-prologue-frame.c: Likewise.
        * gdb.arch/powerpc-prologue-frame.exp: Likewise.

2018-01-31  Joel Brobecker  <brobecker@adacore.com>

        * testsuite/gdb.ada/dyn_stride.exp: Add "print a1(1)@3" test.

2018-01-30  Pedro Alves  <palves@redhat.com>

        PR gdb/13211
        * gdb.base/interrupt-daemon.c: New.
        * gdb.base/interrupt-daemon.exp: New.
        * gdb.multi/multi-term-settings.c: New.
        * gdb.multi/multi-term-settings.exp: New.

2018-01-30  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/break.exp: Save the location where the breakpoint
        on break.c:47 was actually inserted when debugging the version
        compiled at -O2 and use it in the expected output of the "info
        break" test performed soon after.

2018-01-22  Pedro Alves  <palves@redhat.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/whatis.exp: Add tests for 'set print object on' +
        'whatis <struct>' 'whatis <struct> *' and 'whatis <struct> &'.

2018-01-22  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/break-include.c, gdb.base/break-include.inc,
        gdb.base/break-include.exp: New files.
        * gdb.base/ending-run.exp: Minor adaptations due to the breakpoint's
        line number now being the actual line number where the breakpoint
        was inserted.
        * gdb.mi/mi-break.exp: Likewise.
        * gdb.mi/mi-reverse.exp: Likewise.
        * gdb.mi/mi-simplerun.exp: Ditto.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.python/py-mi.exp: Don't expect a thread-id for floating
        varobj.
        * gdb.mi/mi-var-create-rtti.exp: Likewise.

2018-01-21  Don Breazeal  <donb@codesourcery.com>
            Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/basics.c: Add new global.
        * gdb.mi/mi-frame-regs.exp: New file.
        * gdb.mi/mi-var-create-rtti.exp: Update expected results, add new
        case.

2018-01-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.arch/amd64-entry-value.exp: Test using @entry on a
        non-parameter, and on an unknown symbol.

2018-01-19  Tom Tromey  <tom@tromey.com>

        * gdb.rust/modules.rs (TWENTY_THREE): New global.
        * gdb.rust/modules.exp: Add ::-qualified lookup test.

2018-01-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-vregs.exp: Explicitly cast the return values of
        setrlimit and chdir to int.

2018-01-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-tdbregs.c (my_tbegin): Add comment documenting the
        function.
        (my_tend): Likewise.
        * gdb.arch/s390-tdbregs.exp: Enhance comment; explain the
        rationale of avoiding FP- and vector instructions.

2018-01-19  Ruslan Kabatsayev  <b7.10110111@gmail.com>

        * gdb.arch/powerpc-d128-regs.exp: Replace expected "\[\t\]*" from
        "info reg" with "\[ \t\]*".
        * gdb.arch/altivec-regs.exp: Replace expected "\t" from "info reg" with
        "\[ \t\]+".
        * gdb.arch/s390-multiarch.exp: Ditto.
        * gdb.base/pc-fp.exp: Ditto.
        * gdb.reverse/i386-precsave.exp: Ditto.
        * gdb.reverse/i386-reverse.exp: Ditto.
        * gdb.reverse/i387-env-reverse.exp: Ditto.
        * gdb.reverse/i387-stack-reverse.exp: Ditto.

2018-01-18  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/gdb.exp (gdb_compile): Re-enable use of
        universal_compile_options for languages other than Rust.

2018-01-18  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-tdbregs.exp: Add the compile option -msoft-float.

2018-01-17  Mike Gulick  <mgulick@mathworks.com>

        PR gdb/16577
        * gdb.base/solib-vanish.exp: New.
        * gdb.base/solib-vanish-main.c: New.
        * gdb.base/solib-vanish-lib1.c: New.
        * gdb.base/solib-vanish-lib2.c: New.

2018-01-17  Yao Qi  <yao.qi@linaro.org>

        * gdb.compile/compile.exp: Match the address printed for
        frame in the output of command "bt".

2018-01-15  Tom Tromey  <tom@tromey.com>

        * gdb.guile/scm-ports.exp (test_mem_port_rw): Use get_valueof to
        compute sp_reg.

2018-01-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/whatis-ptype-typedefs.exp: Don't run tests if we failed
        to prepare.
        (prepare): Return 0 on error, 1 on success.

2018-01-12  Pedro Alves  <palves@redhat.com>

        * gdb.base/continue-after-aborted-step-over.c: New.
        * gdb.base/continue-after-aborted-step-over.exp: New.

2018-01-11  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_compile): Ignore shlib= and shlib_load
        options when not creating an executable.

2018-01-11  Pedro Alves  <palves@redhat.com>

        PR remote/22597
        * gdb.server/stop-reply-no-thread.c: New file.
        * gdb.server/stop-reply-no-thread.exp: New file.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * gdb.ada/bp_c_mixed_case.exp: Add intro comment.  Test printing C
        functions too.  Test setting breakpoints and printing C functions
        with no debug info too.
        * gdb.ada/bp_c_mixed_case/qux.c: New file.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * gdb.ada/complete.exp ("complete break ada"): Replace kfail with
        a fail.

2018-01-10  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * gdb.ada/bp_c_mixed_case.exp: Remove setup_kfail calls.

2018-01-08  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.server/unittest.exp: Match the output in non-development
        mode.

2018-01-08  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.gdb/unittest.exp: Match output in non-development mode.

2018-01-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/access_tagged_param.exp: Relax expected output
        for value of "ObjL" in "continue" to pck.inspect breakpoint
        test.

2018-01-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/arr_enum_idx_w_gap.exp: New file.
        * gdb.ada/arr_enum_idx_w_gap/foo_q418_043.adb: New file.

2018-01-05  Pedro Alves  <palves@redhat.com>

        PR gdb/18653
        * gdb.base/libsegfault.exp: New.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * gdb.ada/access_tagged_param.exp: New file.
        * gdb.ada/access_tagged_param/foo.adb: New file.

2018-01-05  Pedro Alves  <palves@redhat.com>

        PR gdb/22670
        * gdb.ada/info_addr_mixed_case.exp: Remove kfail.  Extend test to
        exercise lower case too, and to exercise both full matching and
        wild matching.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/rename_subscript_param: New testcase.

2018-01-05  Jerome Guitton  <guitton@adacore.com>

        * gdb.ada/arr_acc_idx_w_gap: New testcase.

2018-01-05  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/convvar_comp: New testcase.

2018-01-05  Xavier Roirand  <roirand@adacore.com>

        * testsuite/gdb.ada/array_char_idx/pck.ads (Table): New type.
        (My_Table): New global variable.
        * testsuite/gdb.ada/array_char_idx.exp: Add test.

2018-01-04  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * gdb.ada/maint_with_ada: New testcase.

2018-01-04  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * gdb.ada/bp_c_mixed_case: New testcase.

2018-01-04  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * gdb.ada/complete.exp: Add "complete break ada" test.

2018-01-04  Joel Brobecker  <brobecker@adacore.com>

        PR gdb/22670
        * gdb.ada/info_addr_mixed_case: New testcase.

2018-01-03  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/excep_handle.exp: New testcase.
        * gdb.ada/excep_handle/foo.adb: New file.
        * gdb.ada/excep_handle/pck.ads: New file.

2018-01-03  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/step-line.c: Add extra empty line in copyright header.
        * gdb.base/step-line.inp: Likewise.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/dyn_stride.exp: Add slice test.

2018-01-02  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/dyn_stride: New testcase.

2017-12-27  Stafford Horne  <shorne@gmail.com>

        * gdb.xml/extra-regs.xml: Add example foo reggroup.
        * gdb.xml/tdesc-regs.exp: Add test to check for foo reggroup.

2017-12-27  Stafford Horne  <shorne@gmail.com>

        * gdb.base/reggroups.c: New file.
        * gdb.base/reggroups.exp: New file.

2017-12-18  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/ada-valprint-error.c: New file.
        * gdb.dwarf2/ada-valprint-error.exp: New file.

2017-12-18  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/assign_arr: New testcase.

2017-12-18  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/funcall_ptr: New testcase.

2017-12-15  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR cli/16224
        * gdb.base/ptype-offsets.cc: New file.
        * gdb.base/ptype-offsets.exp: New file.

2017-12-15  Yao Qi  <yao.qi@linaro.org>

        * gdb.gdb/unittest.exp: Skip 'maintenance check xml-descriptions'
        if XML is disabled.

2017-12-15  Xavier Roirand  <roirand@adacore.com>

        * gdb.ada/same_component_name: New testcase.

2017-12-14  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/str_binop_equal: New testcase.

2017-12-14  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/task_switch_in_core: New testcase.

2017-12-13  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-breakpoint.c (foo_ns::multiply): New function.
        * gdb.python/py-breakpoint.exp: Compile the test case as c++,
        call test_bkpt_qualified.
        (test_bkpt_qualified): New proc.

2017-12-13  Pedro Alves  <palves@redhat.com>

        * lib/completion-support.exp (test_gdb_complete_tab_multiple):
        Tighten regexp by matching with an anchor.

2017-12-13  Pedro Alves  <palves@redhat.com>

        * gdb.cp/cpcompletion.exp: Load completion-support.exp.
        ("expression with namespace"): New set of tests.
        * gdb.cp/pr9594.cc (Test_NS::foo, Test_NS::bar)
        (Nested::Test_NS::qux): New.
        * lib/completion-support.exp (test_gdb_complete_cmd_multiple): Add
        defaults to 'start_quote_char' and 'end_quote_char' parameters.

2017-12-13  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/server-del-break.c: New file.
        * gdb.base/server-del-break.exp: New file.

2017-12-12  Stafford Horne  <shorne@gmail.com>

        * gdb.xml/tdesc-regs.exp: Add or1k support.

2017-12-12  Stafford Horne  <shorne@gmail.com>

        * gdb.base/bp-permanent.c: Define nop of or1k.

2017-12-11  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/variant_record_packed_array.exp: Adapt test to accept
        output with components being reordered.

2017-12-11  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pkd_arr_elem.exp: Adapt "print test" test to accept
        output with components being reordered.

2017-12-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/maint.exp (check for .gdb_index): Check also for
        .debug_names.
        * gdb.dlang/watch-loc.c (.debug_aranges): New.
        * gdb.dwarf2/dw2-case-insensitive-debug.S: Likewise.
        * gdb.dwarf2/gdb-index.exp (check if index present, .gdb_index used)
        (.gdb_index used after symbol reloading): Support also .debug_names.
        * gdb.mi/dw2-ref-missing-frame-func.c (.debug_aranges): New.

2017-12-08  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/aarch64-tagged-pointer.c (main): Update.
        * gdb.arch/aarch64-tagged-pointer.exp: Add tests for watchpoint.

2017-12-08  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/aarch64-tagged-pointer.c (main): Update.
        * gdb.arch/aarch64-tagged-pointer.exp: Add test for breakpoint.

2017-12-08  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/aarch64-tagged-pointer.c: New file.
        * gdb.arch/aarch64-tagged-pointer.exp: New file.

2017-12-08  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.arch/i386-sse-stack-align.exp: Cast "print" function call
        "int".

2017-12-07  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/22569
        * gdb.linespec/ls-errs.exp: Change expected result of "break
        -source this file has spaces.c -line 3".
        Check that an explicit source file followed by whitespace is
        identified as an invalid explicit location.

2017-12-07  Keith Seitz  <keiths@redhat.com>

        * gdb.cp/nested-types.cc: New file.
        * gdb.cp/nested-types.exp: New file.
        * lib/cp-support.exp: Load data-structures.exp library.
        (debug_cp_test_ptype_class): New global.
        (cp_ptype_class_verbose, next_line): New procedures.
        (cp_test_ptype_class): Add and document new parameter `recursive_qid'.
        Add and document new return value.
        Switch the list of lines to a queue.
        Add support for new `type' key for nested type definitions.
        Add debugging/troubleshooting messages.
        * lib/data-structures.exp: New file.

2017-12-07  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Define
        with proc_with_prefix, don't use with_test_prefix.

2017-12-07  Tom Tromey  <tom@tromey.com>

        * gdb.base/break.exp: Add test for empty "commands".

2017-12-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/ftrace.exp (run_trace_experiment): Set breakpoint on
        malloc and catch syscall.

2017-12-07  Phil Muldoon  <pmuldoon@redhat.com>

        * gdb.python/py-breakpoint.exp (test_bkpt_explicit_loc): Add new
        tests for explicit locations.

2017-12-06  Pedro Alves  <palves@redhat.com>

        * gdb.arch/i386-avx.exp: If testing with a RSP target, check
        force-disabling XML descriptions.

2017-12-04  Pedro Alves  <palves@redhat.com>

        PR gdb/22499
        * gdb.arch/amd64-disp-step-avx.S: New file.
        * gdb.arch/amd64-disp-step-avx.exp: New file.

2017-12-03  Pedro Alves  <palves@redhat.com>

        * gdb.threads/process-dies-while-detaching.c: Include <errno.h>
        and <string.h>.
        (parent_function): Print distinct messages when waitpid fails, or
        the child exits with a signal, or the child exits for an unhandled
        reason.
        * gdb.threads/process-dies-while-detaching.exp
        (detach_and_expect_exit): New 'inf_output_re' parameter and use
        it.  Wait for both inferior output and GDB's prompt.  Use an
        indirect spawn id list.
        (do_detach): New parameter 'child_exit'.  Use it to compute
        expected inferior output.
        (test_detach, test_detach_watch, test_detach_killed_outside):
        Adjust to pass down the expected child exit kind.

2017-12-01  Joel Brobecker  <brobecker@adacore.com>
            Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/readnever.c, gdb.base/readnever.exp: New files.

2017-12-01  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/relocate.exp: Add tests to guarantee that arguments
        to 'symbol-file' and 'add-symbol-file' can be
        position-independent.

2017-12-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/aarch64-atomic-inst.exp: Replace mail address with
        the URL in copyright header.
        * gdb.arch/aarch64-fp.exp: Likewise.
        * gdb.arch/ppc64-atomic-inst.exp: Likewise.
        * gdb.arch/ppc64-isa207-atomic-inst.exp: Likewise.
        * gdb.base/expand-psymtabs.exp: Likewise.
        * gdb.cp/expand-psymtabs-cxx.exp: Likewise.
        * gdb.fortran/common-block.exp: Likewise.
        * gdb.fortran/common-block.f90: Likewise.
        * gdb.fortran/logical.exp: Likewise.
        * gdb.fortran/vla-datatypes.f90: Likewise.
        * gdb.fortran/vla-sub.f90: Likewise.

2017-11-30  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/repeat_dyn: New testcase.

2017-11-30  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.cell/gcore.exp: Fix typo when setting spu_bin.
        Update for changed thread numbering.
        * gdb.cell/bt.exp: Update for changed GDB output.

2017-11-30  Simon Marchi  <simon.marchi@ericsson.com>

        * boards/cc-with-tweaks.exp: Include local-board.exp instead of
        setting isremote by hand.
        * boards/dwarf4-gdb-index.exp: Likewise.
        * boards/fission.exp: Likewise.
        * boards/stabs.exp: Likewise.

2017-11-30  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/cpls-ops.exp
        (check_explicit_skips_function_argument): Extract the underlying
        type of size_t instead of hardcoding it.

2017-11-29  Pedro Alves  <palves@redhat.com>

        PR c++/19436
        * gdb.linespec/cpls-abi-tag.cc: New file.
        * gdb.linespec/cpls-abi-tag.exp: New file.

2017-11-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/langs.exp: Use -qualified.
        * gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
        it.
        * gdb.cp/namespace.exp: Use -qualified.
        * gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
        (overload-3, template-overload, template-ret-type, const-overload)
        (const-overload-quoted, anon-ns, ambiguous-prefix): New
        procedures.
        (test_driver): Call them.
        * gdb.cp/save-bp-qualified.cc: New.
        * gdb.cp/save-bp-qualified.exp: New.
        * gdb.linespec/explicit.exp: Test -qualified.
        * lib/completion-support.exp (completion::explicit_opts_list): Add
        "-qualified".
        * lib/gdb.exp (gdb_breakpoint): Handle "qualified".

2017-11-29  Phil Muldoon  <pmuldoon@redhat.com>

        * gdb.python/py-rbreak.exp: Set nosharedlibrary before tests.

2017-11-29  Tom Tromey  <tom@tromey.com>

        * gdb.base/relocate.exp: Update invalid argument test.
        Add new tests for invalid arguments.

2017-11-29  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.cp/psymtab-parameter.cc (func): Change return type back to long.
        Return 0 as a long.
        * gdb.cp/psymtab-parameter.exp: Change func's return type back to long.

2017-11-29  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.cp/breakpoint.cc (bar): Set return type to void.
        * gdb.cp/psymtab-parameter.cc (func): Likewise.
        * gdb.cp/psymtab-parameter.exp: Update comment regarding prototype of
        func ().
        * gdb.cp/shadow.cc (B.func): Return 0.

2017-11-27  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_catch_ex.exp (continue_to_exception): Adjust
        expected output in gdb_expect call to allow the exception
        message to be present as well.  Fix syntax confusion to avoid
        TCL thinking that exception_name is an array.

2017-11-26  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/spu-info.c: Include <unistd.h>.
        (do_signal_test): Fix broken calls to write.
        * gdb.arch/spu-info.exp: Use prepare_for_testing.
        Fix checks for empty mailboxes.  Update signal tests for corrected
        do_signal_test routine.  Allow nonzero event status.
        * gdb.arch/spu-ls.exp: Use prepare_for_testing.
        * gdb.cell/arch.exp: Use standard_output_file.
        * gdb.cell/break.exp: Likewise.
        * gdb.cell/bt.exp: Likewise.
        * gdb.cell/core.exp: Likewise.
        * gdb.cell/dwarfaddr.exp: Likewise.
        * gdb.cell/ea-cache.exp: Likewise.
        * gdb.cell/ea-standalone.exp: Likewise.
        * gdb.cell/f-regs.exp: Likewise.
        * gdb.cell/fork.exp: Likewise.
        * gdb.cell/gcore.exp: Likewise.
        * gdb.cell/mem-access.exp: Likewise.
        * gdb.cell/ptype.exp: Likewise.
        * gdb.cell/registers.exp: Likewise.
        * gdb.cell/sizeof.exp: Likewise.
        * gdb.cell/solib-symbol.exp: Likewise.
        * gdb.cell/solib.exp: Likewise.

2017-11-25   Pedro Alves  <palves@redhat.com>

        * gdb.base/complete-empty.exp: New file.
        * gdb.base/completion.exp: Adjust.

2017-11-25  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/cpls-ops.cc: New file.
        * gdb.linespec/cpls-ops.exp: New file.
        * lib/completion-support.exp (test_complete_prefix_range_re): New,
        factored out from ...
        (test_complete_prefix_range): ... this.

2017-11-24  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/cpcompletion.exp: New file.
        * gdb.linespec/cpls-hyphen.cc: New file.
        * gdb.linespec/cpls.cc: New file.
        * gdb.linespec/cpls2.cc: New file.
        * gdb.linespec/explicit.exp: Load completion-support.exp.  Adjust
        test to use test_gdb_complete_unique.  Add label completion,
        keyword completion and explicit location completion tests.
        * lib/completion-support.exp: New file.

2017-11-24  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/catch_ex.exp, gdb.ada/mi_catch_ex.exp,
        gdb.ada/mi_ex_cond.exp: Accept optional exception message in
        when hitting an exception catchpoint.

2017-11-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/macscp.exp: Append -g3 to additional_flags for clang.

2017-11-22  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.opt/inline-locals.exp: Mark tests as KFAIL.
        * gdb.dwarf2/info-locals-optimized-out.exp: New file.
        * gdb.dwarf2/info-locals-optimized-out.c: New file.

2017-11-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/info-os.exp: Pass pthreads.
        * gdb.multi/multi-attach.exp: Likewise.

2017-11-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.dwarf2/pr10770.exp: Remove code skipping non-gcc
        compiler.

2017-11-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/attach-pie-noexec.exp: Pass "-pie" in ldflags.
        * gdb.base/break-interp.exp: Likewise.
        * gdb.base/jit-attach-pie.exp: Likewise.

2017-11-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.base/float128.c (large128): New variable.
        * gdb.base/float128.exp: Add test to print largest __float128 value.

2017-11-22  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/vsx-regs.exp: Update register content checks.

2017-11-21  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/ppc-longdouble.exp: New file.
        * gdb.arch/ppc-longdouble.c: Likewise.

2017-11-21  Pedro Alves  <palves@redhat.com>

        * gdb.ada/minsyms.exp: Accept any address for 'some_minsym'.

2017-11-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/whatis-ptype-typedefs.c (double_typedef)
        (long_double_typedef): New typedefs.
        Use DEF on double and long double.
        * gdb.base/whatis-ptype-typedefs.exp: Add double and long double
        cases.
        (run_tests): New 'float_ptr_same_size', 'double_ptr_same_size',
        and 'long_double_ptr_same_size' locals.  Use them to decide
        whether cast from array/function to float is valid/invalid.

2017-11-17  Tom Tromey  <tom@tromey.com>

        * gdb.rust/traits.rs: New file.
        * gdb.rust/traits.exp: New file.

2017-11-17  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/minsyms: New testcase.

2017-11-16  Pedro Alves  <palves@redhat.com>

        * gdb.base/bp-cmds-continue-ctrl-c.c: New file.
        * gdb.base/bp-cmds-continue-ctrl-c.exp: New file.

2017-11-16  Pedro Alves  <palves@redhat.com>

        * gdb.rust/modules.exp: Skip tests that rely on inferior I/O if
        gdb,noinferiorio is set, and use gdb_test_stdio otherwise.

2017-11-16  Pedro Alves  <palves@redhat.com>

        * gdb.server/reconnect-ctrl-c.c: New file.
        * gdb.server/reconnect-ctrl-c.exp: New file.

2017-11-16  Phil Muldoon  <pmuldoon@redhat.com>

        * gdb.python/py-rbreak.exp: New file.
        * gdb.python/py-rbreak.c: New file.
        * gdb.python/py-rbreak-func2.c: New file.

2017-11-16  Pedro Alves  <palves@redhat.com>

        * gdb.base/starti.exp ("continue" test): Remove ".*"s from
        pattern.
        * lib/gdb.exp (gdb_test_sequence): Don't send empty command to
        GDB.

2017-11-15  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.tui/completionn.exp (test_tab_completion): Add space in
        regex.

2017-11-13  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.opt/inline-locals.exp: Remove trailing parentheses from
        test names.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.tui/tui-completion.exp (test_tab_completion): New procedure,
        factored out from ...
        (top level): ... here, and adjusted to avoid expecting beyond the
        prompt in a single gdb_test_multiple.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-attach.exp ("kill" test): Match the whole query
        output.
        * gdb.server/ext-attach.exp ("kill" test): Likewise.
        * gdb.server/ext-restart.exp ("kill" test): Likewise.
        * gdb.server/ext-run.exp ("kill" test): Likewise.
        * gdb.server/ext-wrapper.exp ("kill" test): Likewise.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.cp/cpcompletion.exp (test_class_complete): Tighten regex to
        match till end of line.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/memattr.exp: Tighten regexes to match the end line.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/completion.exp (ignore_and_resync, test_tab_complete):
        New procedures, factored out from ...
        (top level): ... here, and adjusted to avoid expecting beyond the
        prompt in one go.

2017-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.asm/asm-source.exp ("kill" test): Match the whole query
        output.  Fix '?' match.

2017-11-08  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/scoped_watch: New testcase.
        * gdb.ada/watch_arg.exp: Adjust expected behavior to the behavior
        which is actually correct.
        * gdb.ada/mi_interface.exp: Add missing thread-id in expected varobj.
        * gdb.ada/mi_var_array.exp: Add missing thread-id in expected varobj.

2017-11-08  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/complaints.exp (test_initial_complaints)
        (test_serial_complaints, test_short_complaints): Call
        complaint_internal instead of complaint.

2017-11-08  Djordje Todorovic  <djordje.todorovic@rt-rk.com>

        * gdb.threads/tls-core.c: New file.
        * gdb.threads/tls-core.exp: Likewise.

2017-11-08   Pedro Alves  <palves@redhat.com>

        * gdb.ada/complete.exp (p <Exported_Capitalized>): New test.
        (p Exported_Capitalized): New test.
        (p exported_capitalized): New test.

2017-11-07  Pedro Alves  <palves@redhat.com>

        * gdb.cp/ena-dis-br-range.exp: Add more tests.

2017-11-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/ena-dis-br.exp (test_ena_dis_br): Adjust test.
        * gdb.cp/ena-dis-br-range.exp: Adjust tests.
        (disable_invalid, disable_inverted, disable_negative): New
        procedures.
        ("bad numbers"): New set of tests.

2017-11-07  Pedro Alves  <palves@redhat.com>

        * gdb.cp/ena-dis-br-range.exp: Add tests.

2017-11-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/ena-dis-br.exp: Don't expect "warning:".

2017-11-07  Xavier Roirand  <roirand@adacore.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/ena-dis-br.exp: Add reference to
        gdb.cp/ena-dis-br-range.exp.
        * gdb.cp/ena-dis-br-range.exp: New file.
        * gdb.cp/ena-dis-br-range.cc: New file.

2017-11-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/attach-non-pgrp-leader.c: New.
        * gdb.base/attach-non-pgrp-leader.exp: New.

2017-11-06  Pedro Alves  <palves@redhat.com>

        * configure.ac: No longer check for termio.h and sgtty.h.
        * configure: Regenerate.
        * remote-utils.c: Include termios.h instead of gdb_termios.h.
        (remote_open): Check HAVE_TERMIOS_H instead of HAVE_TERMIOS.
        Remove termio and sgtty code.

2017-11-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.mi/list-thread-groups-available.exp: Skip it if XML parsing
        in GDB is disabled.

2017-11-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.python/py-thrhandle.exp: Skip it if python is not
        enabled.

2017-10-31  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/mi-break.exp (test_breakpoint_commands): Test backtrace
        as a breakpoint command.

2017-10-28  Maksim Dzabraev  <dzabraew@gmail.com>

        PR python/21213
        * gdb.python/py-infthread.exp: Test calling
        InferiorThread.inferior () multiple times in a row.

2017-10-27  Keith Seitz  <keiths@redhat.com>

        * gdb.opt/inline-break.exp (break_info_1): New procedure.
        Test "info break" for every inlined function breakpoint.

2017-10-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/insn-reloc.c (can_relocate_bl): Mark "x30" clobbered.

2017-10-26  Patrick Frants  <osscontribute@gmail.com>

        * gdb.cp/classes.exp (test_static_members): Test printing
        Outer::instance.
        * gdb.cp/classes.c (struct Inner, struct Outer): New.
        (Inner::instance, Outer::instance): New.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.base/new-ui.exp (do_test): Split "delete all breakpoints on
        extra console" test in two stages.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-into-signal.exp (corefunc): Reindent.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-into-signal.exp: Remove whole "stoppedtry"
        loop.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-into-signal.exp (corefunc): Remove "attach
        $attempt" and "stoppedtry $stoppedtry" test prefixes.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * lib/gdb-python.exp (get_python_valueof): Add 'test' optional
        parameter and handle it.  Don't output read value in test name.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/unittest.exp ('maintenance check xml-descriptions'): Use
        custom test name.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.base/startup-with-shell.exp ('touch $unique_file'): Don't
        include the unstable output directory name in the test's name.
        (initial_setup_simple) <'set args'>: Use custom test name.

2017-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.arch/arc-tdesc-cpu.exp ('set tdesc filename'): Use gdb_test
        with explicit test name.

2017-10-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/quit.exp: Use gdb_test_multiple and expect 'eof' before
        'wait -i'.  Use gdb_assert and remote_close.

2017-10-19  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.linespec/ls-errs.exp (do_test): Update comment, use line
        number from variable rather than hard-coded.

2017-10-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/long-inferior-output.c: New file.
        * gdb.base/long-inferior-output.exp: New file.

2017-11-18  Keith Seitz  <keiths@redhat.com>

        * gdb.cp/cpexprs.cc (base) <operator fluff const* const*>: New
        method.
        (main): Call it.
        * gdb.cp/cpexprs.exp: Add new conversion operator to test matrix.
        Add additional user-defined conversion operator tests.

2017-10-17  Pedro Alves  <palves@redhat.com>

        * boards/native-stdio-gdbserver.exp: Load "local-board".

2017-10-17  Pedro Alves  <palves@redhat.com>

        * gdb.base/quit-live.c: New file.
        * gdb.base/quit-live.exp: New file.

2017-10-16  Keith Seitz  <keiths@redhat.com>

        * gdb.cp/classes.cc (class_with_typedefs, class_with_public_typedef)
        (class_with_protected_typedef, class_with_private_typedef)
        (struct_with_public_typedef, struct_with_protected_typedef)
        (struct_with_private_typedef): New classes/structs.
        * gdb.cp/classes.exp (test_ptype_class_objects): Add tests for
        typedefs and access specifiers.

2017-10-16  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * README (Local vs Remote vs Native): New section.
        * boards/local-board.exp: New file, with bits factored out from
        ...
        * boards/native-extended-gdbserver.exp: ... here.  Load
        "local-board".
        * boards/native-gdbserver.exp: Load "local-board".
        (${board}_spawn, ${board}_exec): Delete.
        * boards/native-stdio-gdbserver.exp: Most contents factored out to
        ...
        * boards/stdio-gdbserver-base.exp: ... this new file.
        * boards/native-stdio-gdbserver.exp: Reimplement, by loading
        "stdio-gdbserver-base" and defining a get_target_remote_pipe_cmd
        procedure.
        * boards/remote-stdio-gdbserver.exp: Load stdio-gdbserver-base
        instead of native-stdio-gdbserver.  Don't set gdb_server_prog nor
        stdio_gdbserver_command.
        (${board}_get_remote_address, ${board}_get_comm_port)
        (${board}_download, ${board}_upload): Delete.
        (get_target_remote_pipe_cmd): New.

2017-10-16  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-breakpoint.exp (test_bkpt_basic,
        test_bkpt_deletion, test_bkpt_cond_and_cmds,
        test_bkpt_invisible, test_watchpoints, test_bkpt_internal,
        test_bkpt_eval_funcs, test_bkpt_temporary, test_bkpt_address,
        test_bkpt_pending, test_bkpt_events): Use proc_with_prefix,
        remove with_test_prefix.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (target_can_use_run_cmd): New procedure.
        * gdb.base/annota1.exp: Use it instead of is_remote.
        * gdb.base/annota3.exp: Use it instead of is_remote.
        * gdb.cp/annota2.exp: Use it instead of is_remote.
        * gdb.cp/annota3.exp: Use it instead of is_remote.
        * gdb.multi/bkpt-multi-exec.exp: Use it instead of is_remote.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/testenv.exp: Check use_gdb_stub instead of is_remote.
        (test_num_test_vars, run_and_count_vars, find_env)
        (test_set_unset_env, test_inherit_env_var): New procedures.
        (top level): Use them.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * lib/selftest-support.exp (selftest_setup): Extend comments, and
        also skip on stub-like targets.

2017-10-13  Pedro Alves  <palves@redhat.com>

        PR gdb/22293
        * gdb.base/find-unmapped.exp: Don't skip if is_remote target.
        (top level): Move some tests to ...
        (test_not_found): ... this new procedure.
        (top level): Call it.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/term.exp: Don't skip if is_remote target.  Instead,
        expect different "info terminal" output if testing with a
        non-native target.

2017-10-13  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        PR python/12966
        * gdb.python/py-evthreads.exp: Remove is_remote target kfail.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-evthreads.exp: Start GDB with "set non-stop on"
        already.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-evsignal.exp: Check gdb_protocol instead of
        is_remote.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.threads/thread_events.exp: Check gdb_protocol instead of
        is_remote.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/corefile.exp (corefile_test_run): Skip if gdb_protocol
        is set.
        (corefile_test_attach): Likewise.  Check can_spawn_for_attach
        instead of is_remote.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/remote.exp: Check gdb_protocol instead of is_remote.
        (top level): Add comment.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/remote.exp (top level): Fix comment typo and add
        missing return.

2017-10-13  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/solib-nodir.exp: Split is_remote and skip_shlib_tests
        calls and add comments.  Skip test if use_gdb_stub is set.
        (top level): Use "set cwd" command instead of "cd" command.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/shlib-call.exp (top level): Use gdb_run_cmd and remove
        is_remote target check.

2017-10-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/scope.exp: Use build_executable + clean_restart +
        gdb_file_cmd instead of prepare_for_testing and no longer skip
        "before run" tests on is_remote target boards.  Update comments.
        * boards/native-extended-gdbserver.exp
        (extended_gdbserver_load_last_file): New, factored out from ...
        (gdb_load): ... this.  Move further below and add comment.
        (extended_gdbserver_gdb_file_cmd, gdb_file_cmd, gdb_reload): New.

2017-10-12  Pedro Alves  <palves@redhat.com>

        * gdb.base/attach.exp: Remove references to gdb64.
        * gdb.base/dbx.exp: Remove references to gdb64.

2017-10-12  Simon Marchi  <simon.marchi@polymtl.ca>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/label.exp: Remove is_remote target check.

2017-10-12  Pedro Alves  <palves@redhat.com>

        * gdb.base/auvx.exp (coredir): Update comment.
        (top level) <core_works>: Use "set cwd" command instead of "cd"
        command.

2017-10-12  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/catch-fork-static.exp: No longer skip on is_remote
        target boards.

2017-10-12  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/checkpoint.exp: Don't check is_remote or isnative.
        Instead skip if there's any gdb_protocol set.

2017-10-12  Simon Marchi  <simon.marchi@polymtl.ca>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/dprintf-non-stop.exp: Remove is_remote target check.

2017-10-12  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/argv0-symlink.exp: kfail on remote gdbserver,
        instead of on dejagnu remote boards.

2017-10-12  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/inferior-died.exp: Remove is_remote and isnative
        checks.  Use build_executable + clean_restart instead of
        prepare_for_testing.  Pass "set non-stop on" via GDBFLAGS instead
        of enabling non-stop after starting gdb.

2017-10-12  Pedro Alves  <palves@redhat.com>

        * gdb.threads/non-ldr-exc-1.exp: No longer skip if is_remote target.
        * gdb.threads/non-ldr-exc-2.exp: Ditto.
        * gdb.threads/non-ldr-exc-3.exp: Ditto.
        * gdb.threads/non-ldr-exc-4.exp: Ditto.

2017-10-11  Anton Kolesov  <Anton.Kolesov@synopsys.com>

        * gdb.arch/arc-tdesc-cpu.exp: New file.
        * gdb.arch/arc-tdesc-cpu.xml: Likewise.

2017-10-10  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (get_integer_valueof): Don't output read value in test name.

2017-10-10  Pedro Alves <palves@redhat.com>

        * gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
        expect CLI output.

2017-10-10  Pedro Alves  <palves@redhat.com>

        * lib/selftest-support.exp (selftest_setup): Update for
        captured_command_loop's prototype change.

2017-10-09  Pedro Alves  <palves@redhat.com>

        Test both arch1=>arch2 and arch2=>arch1.

        * gdb.multi/multi-arch-exec.exp (exec1, srcfile1, binfile1, exec2)
        (srcfile2, binfile2, march1, march2): Remove globals.  Largely
        factored out to...
        (append_arch1_options, append_arch2_options, append_arch_options)
        (build_executables): New procedures.
        (do_test): New 'first_arch' parameter.  Use it to define 'from_exec'
        local.
        (top level): Add new 'first_arch' testing axis.

2017-10-09  Pedro Alves  <palves@redhat.com>

        * gdb.multi/multi-arch-exec.c: Include <pthread.h> and <assert.h>.
        (barrier): New.
        (thread_start, all_started): New functions.
        (main): Spawn new thread and wait until it is scheduled.
        * gdb.multi/multi-arch-exec.exp: Build $srcfile1 with the pthreads
        option.
        (do_test): Add 'selected_thread' parameter.  Run to all_started
        instead of main.  Explicitly set the breakpoint at main.  Switch
        to the SELECTED_THREAD thread.
        (top level): Test handling the exec event with either the main
        thread or the second thread selected.

2017-10-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/print-file-var-main.c: Fix get_version_2 value check
        logic.  Move STOP marker after the value checks.
        * gdb.base/print-file-var.exp (continue to STOP marker): Tighten
        regexp.

2017-10-06  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.mi/mi-threads-interrupt.exp: Skip test if nointerrupts.

2017-10-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.base/dfp-exprs.exp: Update tests to larger range of supported
        integer-to-dfp conversion.
        * gdb.base/dfp-test.exp: Likewise.

2017-10-04  Pedro Alves  <palves@redhat.com>

        * gdb.multi/hangout.c: Include <unistd.h>.
        (hangout_loop): New function.
        (main): Call alarm.  Call hangout_loop in a loop.
        * gdb.multi/hello.c: Include <unistd.h>.
        (hello_loop): New function.
        (main): Call alarm.  Call hangout_loop in a loop.
        * gdb.multi/multi-arch.exp: Test running to a breakpoint one
        inferior with the other selected.

2017-10-04  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/list-thread-groups-available.exp: New file.
        * gdb.mi/list-thread-groups-available.c: New file.

2017-10-04  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/set-cwd.exp: Make it available on
        native-extended-gdbserver.

2017-10-04  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/set-cwd.c: New file.
        * gdb.base/set-cwd.exp: Likewise.

2017-10-02  Tom Tromey  <tom@tromey.com>

        PR rust/22236:
        * gdb.rust/simple.rs (main): New variable "fslice".
        * gdb.rust/simple.exp: Add slice tests.  Update string tests.

2017-10-02  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Test ptype of a slice.

2017-10-02  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Test index of slice.

2017-09-27  Tom Tromey  <tom@tromey.com>

        * gdb.base/macscp.exp: Add __VA_OPT__ tests.

2017-09-26  Thomas Preud'homme  <thomas.preudhomme@arm.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/compare-sections.exp (get value of read-only section): Read
        as unsigned value.
        (corrupt read-only section): Likewise and don't set written if patching
        failed.

2017-09-21  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-thrhandle.c, gdb.python/py-thrhandle.exp: New
        files.

2017-09-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/list-ambiguous.exp (test_list_ambiguous_symbol): Expect
        symbol names in gdb's output.
        * gdb.cp/overload.exp ("list all overloads"): Likewise.

2017-09-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/list-ambiguous.exp (test_list_ambiguous_function):
        Rename to ...
        (test_list_ambiguous_symbol): ... this and add a symbol name
        parameter.  Adjust.
        (test_list_ambiguous_function): Reimplement on top of
        test_list_ambiguous_symbol and also test listing ambiguous
        variables.
        * gdb.base/list-ambiguous0.c (ambiguous): Rename to ...
        (ambiguous_fun): ... this.
        (ambiguous_var): New.
        * gdb.base/list-ambiguous1.c (ambiguous): Rename to ...
        (ambiguous_fun): ... this.
        (ambiguous_var): New.

2017-09-19  John Baldwin  <jhb@FreeBSD.org>

        * gdb.base/starti.c: New file.
        * gdb.base/starti.exp: New file.
        * lib/gdb.exp (gdb_starti_cmd): New procedure.

2017-09-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/nodebug.exp (nodebug_runto): New procedure.
        (top level): Use it instead of runto.

2017-09-11  Tom Tromey  <tom@tromey.com>

        * gdb.base/ena-dis-br.exp (test_ena_dis_br): Update test.

2017-09-11  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-infthread.exp: Add tests for new_thread event.
        * gdb.python/py-inferior.exp: Add tests for new inferior events.

2017-09-08  Christoph Weinmann  <christoph.t.weinmann@intel.com>

        * gdb.fortran/printing-types.exp: New file.
        * gdb.fortran/printing-types.exp: New file.

2017-09-08  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-ptype.exp: Fix typos.
        * gdb.fortran/vla-value.exp: Same.

2017-09-08  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-value.exp: Use type names defined in libfortran.
        * gdb.mi/mi-var-child-f.exp: Likewise.
        * gdb.mi/mi-vla-fortran.exp: Likewise.

2017-09-08  Frank Penczek  <frank.penczek@intel.com>
            Christoph Weinmann  <christoph.t.weinmann@intel.com>
            Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/ptr-indentation.f90: New file.
        * gdb.fortran/ptr-indentation.exp: New file.

2017-09-05  Tom Tromey  <tom@tromey.com>

        PR gdb/22010:
        * gdb.base/sizeof.exp (check_valueof): Cast char constant to int.

2017-09-06  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.arch/thumb2-it.exp: Cast call to assembly defined function.

2017-09-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.threads/tls-nodebug-pie.c: New file.
        * gdb.threads/tls-nodebug-pie.exp: New file.

2017-09-05  Tom Tromey  <tom@tromey.com>

        * lib/gdb.exp (gdb_compile): Don't use universal_compile_options
        for rust.

2017-09-05  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.multi/multi-arch-exec.exp: Test with different
        "follow-exec-mode" settings.
        (do_test): New procedure.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/func-static.c (S::method const, S::method volatile)
        (S::method volatile const): New methods.
        (c_s, v_s, cv_s): New instances.
        (main): Call method() on them.
        * gdb.base/func-static.exp (syntax_re, cannot_resolve_re): New variables.
        (cannot_resolve): New procedure.
        (cxx_scopes_list): Test cv methods.  Add print-scope-quote and
        print-quote-unquoted columns.
        (do_test): Test printing each scope too.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/local-static.exp: Also test with
        class::method::variable wholly quoted.
        * gdb.cp/m-static.exp (class::method::variable): Remove test.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/local-static.c: New.
        * gdb.base/local-static.cc: New.
        * gdb.base/local-static.exp:  New.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.asm/asm-source.exp: Add casts to int.
        * gdb.base/nodebug.c (dataglobal8, dataglobal32_1, dataglobal32_2)
        (dataglobal64_1, dataglobal64_2): New globals.
        * gdb.base/nodebug.exp: Test different expressions involving the
        new globals, with print, whatis and ptype.  Add casts to int.
        * gdb.base/solib-display.exp: Add casts to int.
        * gdb.compile/compile-ifunc.exp: Expect warning.  Add cast to int.
        * gdb.cp/m-static.exp: Add cast to int.
        * gdb.dwarf2/dw2-skip-prologue.exp: Add cast to int.
        * gdb.threads/tls-nodebug.exp: Check that gdb errors out printing
        tls variable with no debug info without a cast.  Test with a cast
        to int too.
        * gdb.trace/entry-values.exp: Add casts.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/nodebug.exp: Test that ptype's error about functions
        with unknown return type includes the function name too.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-main-file-remove-fail.exp (test_remove_bp): Cast
        return type of munmap in infcall.
        * gdb.base/break-probes.exp: Cast return type of foo in infcall.
        * gdb.base/checkpoint.exp: Simplify using for loop.  Cast return
        type of ftell in infcall.
        * gdb.base/dprintf-detach.exp (dprintf_detach_test): Cast return
        type of getpid in infcall.
        * gdb.base/infcall-exec.exp: Cast return type of execlp in
        infcall.
        * gdb.base/info-os.exp: Cast return type of getpid in infcall.
        Bail on failure to extract the pid.
        * gdb.base/nodebug.c: #include <stdint.h>.
        (multf, multf_noproto, mult, mult_noproto, add8, add8_noproto):
        New functions.
        * gdb.base/nodebug.exp (test_call_promotion): New procedure.
        Change expected output of print/whatis/ptype with functions with
        no debug info.  Test all supported languages.  Call
        test_call_promotion.
        * gdb.compile/compile.exp: Adjust expected output to expect
        warning.
        * gdb.threads/siginfo-threads.exp: Likewise.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/callfuncs.exp (do_function_calls): New parameter
        "prototypes".  Test calling float functions via prototyped and
        unprototyped function pointers.
        (perform_all_tests): New parameter "prototypes".  Pass it down.
        (top level): Pass down "prototypes" parameter to
        perform_all_tests.

2017-09-04  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp (loop_break_test, loop_continue_test):
        Test with nested loops.

2017-09-04  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp: Call the new procedures.
        (loop_break_test, loop_continue_test): New procedures.

2017-09-04  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp: Call new procedure.
        (define_if_without_arg_test): New procedure.

2017-09-04  Pedro Alves  <palves@redhat.com>

        * gdb.base/list-ambiguous.exp: New file.
        * gdb.base/list-ambiguous0.c: New file.
        * gdb.base/list-ambiguous1.c: New file.
        * gdb.base/list.exp (test_list_range): Adjust expected output.

2017-08-31  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/share-env-with-gdbserver.c: New file.
        * gdb.base/share-env-with-gdbserver.exp: Likewise.

2017-08-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp (gdbvar_simple_if_test,
        gdbvar_simple_if_test, gdbvar_complex_if_while_test,
        progvar_simple_if_test, progvar_simple_while_test,
        progvar_complex_if_while_test, user_defined_command_test,
        user_defined_command_args_eval,
        user_defined_command_args_stack_test,
        user_defined_command_manyargs_test, bp_deleted_in_command_test,
        temporary_breakpoint_commands,
        gdb_test_no_prompt, redefine_hook_test,
        redefine_backtrace_test): Remove "global gdb_prompt".

2017-08-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp (user_defined_command_case_sensitivity):
        New proc, call it from toplevel.

2017-08-23  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR remote/21852
        * gdb.server/normal.c: New file, copied from gdb.base.
        * gdb.server/run-without-local-binary.exp: New file.

2017-08-07  Weimin Pan  <weimin.pan@oracle.com>

        * gdb.arch/sparc64-adi.exp: New file.
        * gdb.arch/sparc64-adi.c: New file.

2017-08-22  Pedro Alves  <palves@redhat.com>

        * gdb.cp/overload.exp (line_range_pattern): New procedure.
        (top level): Add "list all overloads" tests.

2017-08-22  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/xfullpath.exp: Remove.

2017-08-21  Pedro Alves  <palves@redhat.com>

        PR gdb/19487
        * gdb.base/symbol-alias.c: New.
        * gdb.base/symbol-alias2.c: New.
        * gdb.base/symbol-alias.exp: New.

2017-08-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/dfp-test.c
        (d32_t, d64_t, d128_t, d32_t2, d64_t2, d128_t2, v_d32_t, v_d64_t)
        (v_d128_t, v_d32_t2, v_d64_t2, v_d128_t2): New.
        * gdb.base/dfp-test.exp: Add whatis/ptype/cast tests.
        * gdb.base/gnu_vector.exp: Add whatis/ptype/cast tests.
        * gdb.base/whatis-ptype-typedefs.c: New.
        * gdb.base/whatis-ptype-typedefs.exp: New.
        * gdb.python/py-prettyprint.c (int_type, int_type2): New typedefs.
        (an_int, an_int_type, an_int_type2): New globals.
        * gdb.python/py-prettyprint.exp (run_lang_tests): Add tests
        involving typedefs and cast expressions.
        * gdb.python/py-prettyprint.py (class pp_int_typedef): New.
        (lookup_typedefs_function): New.
        (typedefs_pretty_printers_dict): New.
        (top level): Register lookup_typedefs_function in
        gdb.pretty_printers.

2017-08-18  Yao Qi  <yao.qi@linaro.org>

        * gdb.server/unittest.exp: New.

2017-08-15  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/21954
        * gdb.base/environ.exp: Add test to check if 'unset environment'
        works.

2017-08-14  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/gdb.exp (universal_compile_options): New caching proc.
        (gdb_compile): Suppress GCC's coloring of messages.

2017-08-14  Tom Tromey  <tom@tromey.com>

        PR gdb/21675:
        * gdb.base/printcmds.exp (test_radices): New function.
        * gdb.dwarf2/var-access.exp: Use p/u, not p/d.
        * gdb.base/sizeof.exp (check_valueof): Use p/d.
        * lib/gdb.exp (get_integer_valueof): Use p/d.

2017-08-12  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (get_valueof): Don't capture end-of-line
        characters.

2017-08-05  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Allow String to appear in a different
        namespace.

2017-07-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.gdb/unittest.exp: Invoke command
        "maintenance check xml-descriptions".

2017-07-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-vregs.exp: Calculate parameters to hex128 in the
        calling context.
        (hex128): Drop erroneous calculation of parameters.

2017-07-22  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-unwind.exp: Disable stack protection when
        building test file.

2017-07-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp (set language): Adjust expected output.

2017-07-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/dmsym.c (pck__foo__bar__minsym): Rename to ...
        (test_minsym): ... this, and make static.
        (get_pck__foo__bar__minsym): Rename to ...
        (get_test_minsym): ... this.
        * gdb.base/dmsym.exp (): Remove "set language ada" call.  Adjust
        symbol names and comments.
        * gdb.base/dmsym_main.c (get_pck__foo__bar__minsym): Rename to ...
        (get_test_minsym): ... this.
        (pck__foo__bar__minsym__2): Rename to ...
        (test_minsym): ... this.
        (main): Adjust.

2017-07-17  Pedro Alves  <palves@redhat.com>

        * gdb.base/completion.exp: Adjust expected output.
        * gdb.linespec/ls-errs.exp: Don't send tab characters, now that
        the completer works.

2017-07-17  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/ls-errs.exp (do_test): Adjust expected output.

2017-07-15  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-vla-fortran.exp: Make test names unique.

2017-07-14  Tom Tromey  <tom@tromey.com>

        PR rust/21764:
        * gdb.rust/simple.exp: Add tests.

2017-07-14  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Add regression test for PR rust/21763.

2017-07-14  Pedro Alves  <palves@redhat.com>

        * gdb.linespec/base/one/thefile.cc (z1): New function.
        * gdb.linespec/base/two/thefile.cc (z2): New function.
        * gdb.linespec/linespec.exp: Add tests.

2017-07-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-vla-fortran.exp: Correct even more parameter passing
        to mi_create_breakpoint.

2017-07-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-vla-fortran.exp: Correct parameter passing to
        mi_create_breakpoint.

2017-07-11  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/demangle.exp: Update for demangling changes.

2017-07-09  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/shortpiece.exp: New file.

2017-07-06  David Blaikie  <dblaikie@gmail.com>

        * gdb.dwarf2/fission-multi-cu.S: Test containing multiple CUs in a DWO,
        built from fissiont-multi-cu{1,2}.c.
        * gdb.dwarf2/fission-multi-cu.exp: Test similar to fission-base.exp,
        except putting 'main' and 'func' in separate CUs in the same DWO file.
        * gdb.dwarf2/fission-multi-cu1.c: First CU for the multi-CU-single-DWO
        test.
        * gdb.dwarf2/fission-multi-cu2.c: Second CU in the multi-CU-single-DWO
        test.

2017-07-06  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-unwind.exp: Test flushregs.

2017-06-30  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR cli/21688
        * gdb.python/py-cmd.exp (test_python_inline_or_multiline): Add new
        tests for alias commands and trailing whitespace.

2017-06-30  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR cli/21688
        * gdb.python/py-cmd.exp (test_python_inline_or_multiline): New
        procedure.  Call it.

2017-06-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/printcmds.exp: Add tests.

2017-06-28  Doug Gilmore  <Doug.Gilmore@imgtec.com>

        PR gdb/21337
        * gdb.base/reread-readsym.exp: New file.
        * gdb.base/reread-readsym.c: New file.

2017-06-21  Kevin Buettner  <kevinb@redhat.com>

        * gdb.exp (gdb_test): Using noncapturing parens for the $pattern
        subpattern.

2017-06-19  Peter Bergner  <bergner@vnet.ibm.com>

        * gdb.arch/powerpc-power9.exp: Update test case for new lnia
        extended mnemonic.
        * gdb.arch/powerpc-power9.s: Likewise.

2017-06-14  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/var-access.exp: Use register name ecx instead of edx
        on 32-bit x86 targets.  Exploit is_*_target macros where
        appropriate.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/var-access.exp: Add test for non-byte-aligned
        register pieces.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/var-access.exp: Add tests for accessing bit-fields
        located in one or more DWARF pieces.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/gdb.exp (get_endianness): New proc.
        * gdb.arch/aarch64-fp.exp: Use it.
        * gdb.arch/altivec-regs.exp: Likewise.
        * gdb.arch/e500-regs.exp: Likewise.
        * gdb.arch/vsx-regs.exp: Likewise.
        * gdb.base/dump.exp: Likewise.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/gnu_vector.exp: Likewise.
        * gdb.dwarf2/formdata16.exp: Likewise.
        * gdb.dwarf2/implptrpiece.exp: Likewise.
        * gdb.dwarf2/nonvar-access.exp: Likewise.
        * gdb.python/py-inferior.exp: Likewise.
        * gdb.trace/unavailable-dwarf-piece.exp: Likewise.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        PR gdb/21226
        * gdb.dwarf2/nonvar-access.exp: Add checks for verifying that
        stack value pieces are taken from the LSB end.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/var-pieces.exp: Add test case for modifying a
        variable at nonzero offset.

2017-06-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/var-access.c: New file.
        * gdb.dwarf2/var-access.exp: New test.
        * lib/gdb-utils.exp (string_to_regexp): Quote braces as well.

2017-06-12  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/formdata16.exp: Add tests.

2017-06-12  Tom Tromey  <tom@tromey.com>

        * gdb.arch/altivec-regs.exp: Expect decimal results for uint128.

2017-06-12  Tom Tromey  <tom@tromey.com>

        PR exp/16225:
        * gdb.reverse/i386-sse-reverse.exp: Update tests.
        * gdb.arch/vsx-regs.exp: Update tests.
        * gdb.arch/s390-vregs.exp (hex128): New proc.
        Update test.
        * gdb.arch/altivec-regs.exp: Update tests.

2017-06-07  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/startup-with-shell.c: New file.
        * gdb.base/startup-with-shell.exp: Likewise.

2017-06-07  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.server/non-existing-program.exp: Update regex in order to
        reflect the fact that gdbserver is now using fork_inferior (with a
        shell) to startup the inferior.

2017-05-30  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/watch-cond-infcall.exp: Don't run if target doesn't
        support function calls from GDB.

2017-05-21  Tom Tromey  <tom@tromey.com>

        PR rust/21466:
        * gdb.rust/unsized.exp: New file.
        * gdb.rust/unsized.rs: New file.

2017-05-19  Tom Tromey  <tom@tromey.com>

        PR rust/21484:
        * gdb.rust/watch.exp: New file.
        * gdb.rust/watch.rs: New file.

2017-05-18  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.exp: Allow Box to be qualified.

2017-05-18  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.base/float.exp: Expect GDB prompt for targets without FPU.

2017-05-18  Pedro Alves  <palves@redhat.com>

        * gdb.base/fileio.c (test_write, test_read, test_close)
        (test_fstat): Don't print 'ret' in the fail path.

2017-05-18  Pedro Alves  <palves@redhat.com>

        * gdb.base/fileio.c (stop, test_open, test_write, test_read)
        (test_lseek, test_close, test_stat, test_fstat, test_isatty)
        (test_system, test_rename, test_unlink, test_time): Change
        prototypes.
        * gdb.base/fileio.exp (stop_msg): Adjust.

2017-05-18  Pedro Alves  <palves@redhat.com>

        * gdb.base/fileio.c (null_str): New global.
        (test_stat): Use it.
        * gdb.base/fileio.exp: Remove nowarnings.

2017-05-17  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/fileio.exp: Pass nowarnings to gdb_compile.

2017-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/set-inferior-tty.exp (test_set_inferior_tty): Add
        argument command.
        (top-level): Invoke test_set_inferior_tty.

2017-05-04  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-record-btrace-threads.exp (check_insn_for_thread):
        Add parens to print call for Python 3.

2017-05-03  Keith Seitz  <keiths@redhat.com>

        * gdb.cp/oranking.cc (dummy): New function to grab malloc.
        (main): Call it.

2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace.exp: Rename prev_sibling and next_sibling
        to prev and next.

2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace.exp: Remove test for
        gdb.BtraceInstruction.error.

2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace.exp: Remove Record.ptid test.

2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace-threads.c: New file.
        * gdb.python/py-record-btrace-threads.exp: New file.

2017-04-28  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR testsuite/8595
        * gdb.base/environ.exp: Make test available in all architectures.
        Move bits related to "info program" testing to
        gdb.base/info-program.exp.  Rewrite tests to use the two new
        procedures mentione below.
        (test_set_show_env_var) New procedure.
        (test_set_show_env_var_equal): Likewise.
        * gdb.base/info-program.exp: New file.

2017-04-27  Keith Seitz  <keiths@redhat.com>

        * gdb.cp/oranking.cc (test15): New function.
        (main): Call test15 and declare additional variables for testing.
        * gdb.cp/oranking.exp: Remove kfail status for "p foo4(&a)" and
        "p foo101('abc')" tests.
        Add tests for cv qualifier overloads.
        * gdb.cp/rvalue-ref-overloads.exp: Remove kfail status for
        "lvalue reference overload" test.
        * gdb.cp/rvalue-ref-params.exp: Remove kfail status for
        "print value of f1 on Child&& in f2" test.

2017-04-19  Pedro Alves  <palves@redhat.com>

        * gdb.threads/threadapply.exp (kill_and_remove_inferior): New
        procedure.
        (top level): Call it.
        * lib/gdb.exp (gdb_define_cmd): New procedure.

2017-04-12  Pedro Alves  <palves@redhat.com>

        PR gdb/21323
        * gdb.cp/wide_char_types.c: Include <wchar.h>.
        (wchar): New global.
        * gdb.cp/wide_char_types.exp (wide_char_types_program)
        (do_test_wide_char, wide_char_types_no_program, top level): Add
        wchar_t testing.

2017-04-12  Pedro Alves  <palves@redhat.com>

        PR c++/21323
        * gdb.cp/wide_char_types.c: New file.
        * gdb.cp/wide_char_types.exp: New file.

2017-04-05  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/21352
        * gdb.trace/tsv.exp: Add test for "tsave -r".

2017-03-30  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/watch-loc.c: New file.
        * gdb.dlang/watch-loc.exp: New file.

2017-03-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.python/py-section-script.exp (sepdebug): New testcases.

2017-03-28  Anton Kolesov  <anton.kolesov@synopsys.com>

        * gdb.arch/arc-analyze-prologue.S: New file.
        * gdb.arch/arc-analyze-prologue.exp: Likewise.

2017-03-28  Anton Kolesov  <anton.kolesov@synopsys.com>

        * gdb.arch/arc-decode-insn.S: New file.
        * gdb.arch/arc-decode-insn.exp: Likewise.

2017-03-21  Ivo Raisr  <ivo.raisr@oracle.com>

        PR tdep/20928
        * gdb.arch/sparc64-regs.exp: New file.
        * gdb.arch/sparc64-regs.S: Likewise.

2017-03-21  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace.exp: Check for buffer on Python 2
        and memory view on Python 3.

2017-03-20  Artemiy Volkov  <artemiyv@acm.org>
            Keith Seitz  <keiths@redhat.com>

        PR gdb/14441
        * gdb.cp/demangle.exp: Add rvalue reference tests.
        * gdb.cp/rvalue-ref-casts.cc: New file.
        * gdb.cp/rvalue-ref-casts.exp: New file.
        * gdb.cp/rvalue-ref-overload.cc: New file.
        * gdb.cp/rvalue-ref-overload.exp: New file.
        * gdb.cp/rvalue-ref-params.cc: New file.
        * gdb.cp/rvalue-ref-params.exp: New file.
        * gdb.cp/rvalue-ref-sizeof.cc: New file.
        * gdb.cp/rvalue-ref-sizeof.exp: New file.
        * gdb.cp/rvalue-ref-types.cc: New file.
        * gdb.cp/rvalue-ref-types.exp: New file.
        * gdb.python/py-rvalue-ref-value-cc.cc: New file.
        * gdb.python/py-rvalue-ref-value-cc.exp: New file.

2017-03-20  Marc-Andre Laperle  <marc-andre.laperle@ericsson.com>

        * gdb.mi/mi-solib.exp (test_file_list_shared_libraries):
        New procedure.

2017-03-20  Marc-Andre Laperle  <marc-andre.laperle@ericsson.com>

        * lib/mi-support.exp (mi_gdb_test): Add additional message
        for unexpected output.

2017-03-20  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/examine-backward.c (Barrier): New character array
        constant, to ensure that TestStrings is preceded by a string
        terminator.

2017-03-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/dwarf.exp: Add support for DW_OP_implicit_pointer.
        * gdb.dwarf2/nonvar-access.exp: Add test for stack value location
        and implicit pointer into such a location.

2017-03-16  Doug Evans  <dje@google.com>

        * gdb.python/py-lazy-string (pointer): Really add new typedef.

2017-03-16  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.cp/m-static.exp: Fix expectation for prototype of
        test5.single_constructor and single_constructor::single_constructor.

2017-03-16  Doug Evans  <dje@google.com>

        * gdb.guile/scm-value.c (main) Delete locals sptr, sn.
        * gdb.guile/scm-lazy-string.c: New file.
        * gdb.guile/scm-value.exp: Move lazy string tests to ...
        * gdb.guile/scm-lazy-string.exp: ... here, new file.  Add more tests
        for pointer, array, typedef lazy strings.

2017-03-16  Doug Evans  <dje@google.com>

        PR python/17728, python/18439, python/18779
        * gdb.python/py-value.c (main) Delete locals sptr, sn.
        * gdb.python/py-lazy-string.c (pointer): New typedef.
        (main): New locals ptr, array, typedef_ptr.
        * gdb.python/py-value.exp: Move lazy string tests to ...
        * gdb.python/py-lazy-string.exp: ... here.  Add more tests for pointer,
        array, typedef lazy strings.

2017-03-14  Anton Kolesov  <anton.kolesov@synopsys.com>

        * lib/gdb.exp (get_valueof, get_integer_valueof, get_sizeof):
          Add optional 'test' parameter.

2017-03-13  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/commands.exp (backslash_in_multi_line_command_test):
        Skip for versions of DejaGnu < 1.5.

2017-03-13  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (dejagnu_version): New proc.
        * gdb.threads/attach-many-short-lived-threads.exp (bad_dejagnu):
        Use dejagnu_version.

2017-03-10  Keith Seitz  <keiths@redhat.com>

        PR c++/8128
        * gdb.cp/templates.exp (test_ptype_of_templates): Remove argument
        type from destructor regexps.
        Add a branch which actually passes the test.
        Adjust "ptype t5i" test names.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.base/step-over-exit.exp: Add explicit test message.

2017-03-08  Pedro Alves  <palves@redhat.com>

        PR gdb/18360
        * gdb.threads/interrupt-while-step-over.c: New file.
        * gdb.threads/interrupt-while-step-over.exp: New file.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.arch/amd64-entry-value-param-dwarf5.exp: Use with_test_prefix.
        * gdb.arch/amd64-entry-value-param.exp: Use with_test_prefix.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.arch/i386-pkru.exp (probe PKRU support): Handle detecting
        PKRU as not supported as a PASS.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-fun-addr.exp: Use $testfile1/$testfile2 for test
        prefix instead of $binfile1/$binfile2.
        * gdb.btrace/gcore.exp: Use "core" instead of unstable path name
        in test message.
        * gdb.python/py-completion.exp: Use "load python file" as test
        messages instead of unstable path names.

2017-03-08  Pedro Alves  <palves@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR cli/21218
        * gdb.base/commands.exp (backslash_in_multi_line_command_test):
        New proc.
        (top level): Call it.

2017-03-08  Pedro Alves  <palves@redhat.com>

        PR tui/21216
        * gdb.tui/tui-nl-filtered-output.exp: New file.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.base/completion.exp: Move TUI completion tests to ...
        * gdb.tui/completion.exp: ... this new file.

2017-03-08  Pedro Alves  <palves@redhat.com>

        * gdb.base/tui-disasm-long-lines.c,
        gdb.base/tui-disasm-long-lines.exp, gdb.base/tui-layout.c,
        gdb.base/tui-layout.exp: Move to ...
        * gdb.tui/: ... this new directory.

2017-03-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/tui-layout.c: New file.
        * gdb.base/tui-layout.exp: New file.

2017-03-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/tui-layout.c: Rename to ...
        * gdb.base/tui-disasm-long-lines.c: ... this.
        * gdb.base/tui-layout.exp: Rename to ...
        * gdb.base/tui-disasm-long-lines.exp: ... this.

2017-03-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/tui-layout.exp: Add intro comment and fix typo.

2017-03-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * i386-mpx-call.c: New file.
        * i386-mpx-call.exp: New file.

2017-02-28  Peter Bergner  <bergner@vnet.ibm.com>

        * gdb.arch/powerpc-power.exp: Delete test.
        * gdb.arch/powerpc-power.s: Likewise.
        * gdb.disasm/disassembler-options.exp: New test.
        * gdb.arch/powerpc-altivec.exp: Likewise.
        * gdb.arch/powerpc-altivec.s: Likewise.
        * gdb.arch/powerpc-altivec2.exp: Likewise.
        * gdb.arch/powerpc-altivec2.s: Likewise.
        * gdb.arch/powerpc-altivec3.exp: Likewise.
        * gdb.arch/powerpc-altivec3.s: Likewise.
        * gdb.arch/powerpc-power7.exp: Likewise.
        * gdb.arch/powerpc-power7.s: Likewise.
        * gdb.arch/powerpc-power8.exp: Likewise.
        * gdb.arch/powerpc-power8.s: Likewise.
        * gdb.arch/powerpc-power9.exp: Likewise.
        * gdb.arch/powerpc-power9.s: Likewise.
        * gdb.arch/powerpc-vsx.exp: Likewise.
        * gdb.arch/powerpc-vsx.s: Likewise.
        * gdb.arch/powerpc-vsx2.exp: Likewise.
        * gdb.arch/powerpc-vsx2.s: Likewise.
        * gdb.arch/powerpc-vsx3.exp: Likewise.
        * gdb.arch/powerpc-vsx3.s: Likewise.
        * gdb.arch/arm-disassembler-options.exp: Likewise.
        * gdb.arch/powerpc-disassembler-options.exp: Likewise.
        * gdb.arch/s390-disassembler-options.exp: Likewise.

2017-02-23  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.reverse/insn-reverse.x86.c (check_rdrand_support): Renamed to ...
        (check_supported_features): ... this. Changed return type to void.
        (supports_rdseed): New static global.
        (rdseed): Check supports_rdseed.
        (initialize): Call check_supported_features.

2017-02-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * gdb.arch/ppc64-isa207-atomic-inst.exp: New testcase based on
        gdb.arch/ppc64-atomic-inst.exp.  Add tests for lbarx/stbcx, lharx/sthcx
        and lqarx/stqcx.
        * gdb.arch/ppc64-isa207-atomic-inst.S: New file.
        * gdb.arch/ppc64-isa207-atomic-inst.c: Likewise.

2017-02-21  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * gdb.arch/ppc64-atomic-inst.exp: Fix test names starting with
        uppercase.

2017-02-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.dwarf2/formdata16.c: New file.
        * gdb.dwarf2/formdata16.exp: New file.
        * lib/dwarf.exp (Dwarf): Add DW_FORM_data16.

2017-02-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/amd64-entry-value-param-dwarf5.S: New file.
        * gdb.arch/amd64-entry-value-param-dwarf5.c: New file.
        * gdb.arch/amd64-entry-value-param-dwarf5.exp: New file.
        * gdb.arch/amd64-entry-value.exp: Rename DW_OP_GNU_*, DW_TAG_GNU_* and
        DW_AT_GNU_*.

2017-02-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.dwarf2/dw2-error.exp (file $testfile): Update expected string.

2017-02-15  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/21164
        * gdb.base/maint.exp: Add testcases for when the commands do
        not have arguments.

2017-02-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * gdb.cp/chained-calls.exp: Use p instead of P.

2017-02-14  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.python/py-record-btrace.c, gdb.python/py-record-btrace.exp,
        gdb.python/py-record-full.c, gdb.python/py-record-full.exp: New file.

2017-02-14  Tom Tromey  <tom@tromey.com>

        PR python/13598:
        * gdb.python/py-events.exp: Add before_prompt event tests.

2017-02-14  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/implptrpiece.exp: Fix check for big-endian targets.

2017-02-13  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.linespec/explicit.c (my_unique_function_name): New function.
        (main): Call my_unique_function_name.
        * gdb.linespec/explicit.exp: Use my_unique_function_name to test
        completion of patterns with a single match.
        Add missing -re switches to gdb_test_multiple calls.

2017-02-13  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.arch/i386-biarch-core.exp: Check for i386 arch support and
        return if core file is not recognized.

2017-02-10  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/new-ui.exp (do_test): Test queries behavior on main
        and extra UIs.

2017-02-10  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/new-ui.exp (do_test, do_test_invalid_args): Use
        proc_with_prefix.

2017-02-10  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-xmethods.exp: Use "p" command, not "P".

2017-02-10  Martin Galvan  <martingalvan@sourceware.org>

        PR gdb/21122
        * gdb.base/help.exp: Update match pattern for testing 'help commands'.

2017-02-08  Jerome Guitton  <guitton@adacore.com>

        * gdb.base/define.exp: Add test for command abbreviations
        in define.

2017-02-06  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.reverse/insn-reverse.c: Include insn-reverse-x86.c.
        * gdb.reverse/insn-reverse-x86.c: New file.

2017-02-06  Ivo Raisr  <ivo.raisr@oracle.com>

        PR tdep/20936
        * gdb.xml/tdesc-regs.exp: Provide sparc core registers for the tests.

2017-02-03  Tom Tromey  <tom@tromey.com>

        PR rust/21097:
        * gdb.rust/simple.exp: Add new tests.

2017-02-02  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-logging.exp: Add "redirect while already logging"
        tests.

2017-02-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/dw2-op-stack-value.exp: Adjust expected result of
        taking a 2-byte value out of a 4-byte DWARF implicit value on
        big-endian targets.
        * gdb.dwarf2/nonvar-access.exp: Add more comments to existing
        logic.  Add test cases for DW_OP_implicit.

2017-02-01  Markus Metzger  <markus.t.metzger@intel.com>

        * lib/gdb.exp (gdb_skip_xml_tests): Error if GDB is running.

2017-02-01  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/enable.exp: Call gdb_exit before
        skip_gdbserver_tests.

2017-02-01  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/non-stop.exp: Add '-ex "set non-stop on"' to
        GDBFLAGS.

2017-02-01  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/buffer-size.exp: Add unsupported/untested message if
        the test is skipped.
        * gdb.btrace/data.exp: Likewise.
        * gdb.btrace/delta.exp: Likewise.
        * gdb.btrace/dlopen.exp: Likewise.
        * gdb.btrace/enable-running.exp: Likewise.
        * gdb.btrace/enable.exp: Likewise.
        * gdb.btrace/exception.exp: Likewise.
        * gdb.btrace/function_call_history.exp: Likewise.
        * gdb.btrace/gcore.exp: Likewise.
        * gdb.btrace/instruction_history.exp: Likewise.
        * gdb.btrace/multi-thread-step.exp: Likewise.
        * gdb.btrace/nohist.exp: Likewise.
        * gdb.btrace/non-stop.exp: Likewise.
        * gdb.btrace/reconnect.exp: Likewise.
        * gdb.btrace/record_goto-step.exp: Likewise.
        * gdb.btrace/record_goto.exp: Likewise.
        * gdb.btrace/rn-dl-bind.exp: Likewise.
        * gdb.btrace/segv.exp: Likewise.
        * gdb.btrace/step.exp: Likewise.
        * gdb.btrace/stepi.exp: Likewise.
        * gdb.btrace/tailcall-only.exp: Likewise.
        * gdb.btrace/tailcall.exp: Likewise.
        * gdb.btrace/tsx.exp: Likewise.
        * gdb.btrace/unknown_functions.exp: Likewise.
        * gdb.btrace/vdso.exp: Likewise.

2017-02-01  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/enable-running.c: New.
        * gdb.btrace/enable-running.exp: New.

2017-01-27  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.arch/amd64-gs_base.c: New file.
        * gdb.arch/amd64-gs_base.exp: New file.

2017-01-26  Luis Machado  <lgustavo@codesourcery.com>

        * lib/memory.exp: Remove spurious empty newlines.

2017-01-26  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.python/py-bad-printers.exp: Load python file using "source".
        * gdb.python/py-events.exp: Likewise.
        * gdb.python/py-evsignal.exp: Likewise.
        * gdb.python/py-evthreads.exp: Likewise.
        * gdb.python/py-frame-args.exp: Likewise.
        * gdb.python/py-framefilter-invalidarg.exp: Likewise.
        * gdb.python/py-framefilter-mi.exp: Likewise.
        * gdb.python/py-framefilter.exp: Likewise.
        * gdb.python/py-mi.exp: Likewise.
        * gdb.python/py-pp-maint.exp: Likewise.
        * gdb.python/py-pp-registration.exp: Likewise.
        * gdb.python/py-prettyprint.exp: Likewise.
        (run_lang_tests): Likewise.
        * gdb.python/py-typeprint.exp: Likewise.

2017-01-26  Luis Machado  <lgustavo@codesourcery.com>

        * lib/memory.exp: New file.
        * lib/gdb.exp: Load memory.exp.
        * gdb.base/memattr.exp (delete_memory): Move proc to
        lib/memory.exp and rename to delete_memory_regions.
        Replace delete_memory with delete_memory_regions.
        Cleanup memory regions before tests.
        * gdb.base/breakpoint-in-ro-region.exp: Cleanup memory regions
        before tests.

2017-01-26  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.reverse/insn-reverse.c: Move arm and aarch64 code to their own
        files.
        (initialize): New function conditionally defined.
        (testcases): Move within conditional block.
        (main): Call initialize.
        * gdb.reverse/insn-reverse-aarch64.c: New file, based on aarch64 bits
        of gdb.reverse/insn-reverse.c.
        * gdb.reverse/insn-reverse-arm.c: New file, based on arm bits of
        gdb.reverse/insn-reverse.c.

2017-01-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/all-architectures.exp.in (do_arch_tests): Test
        disassemble on address 0.

2017-01-25  Andreas Arnez  <arnez@linux.vnet.ibm.com>
            Yao Qi  <yao.qi@linaro.org>

        * gdb.dwarf2/implptr-64bit.exp: Use dwarf assembler.
        * gdb.dwarf2/implptr-64bit.S: Remove.
        * lib/dwarf.exp (Dwarf): Handle character "%".  Evaluate some
        variables in caller's context.  Add DW_OP_implicit_value.

2017-01-25  Yao Qi  <yao.qi@linaro.org>

        * lib/dwarf.exp (Dwarf::_location): Handle
        DW_OP_GNU_implicit_pointer with proper size.

2017-01-20  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.python/py-xmethods.exp: Fix test names starting with lowercase
        and add untested calls.

2017-01-20  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.python/python.exp: Check line number against what GDB thinks
        the line number is for func1.

2017-01-08  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/debug-expr.exp: New file.

2016-12-23  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names for the following files:

        * gdb.ada/exec_changed.exp
        * gdb.ada/info_types.exp
        * gdb.arch/aarch64-atomic-inst.exp
        * gdb.arch/aarch64-fp.exp
        * gdb.arch/altivec-abi.exp
        * gdb.arch/altivec-regs.exp
        * gdb.arch/amd64-byte.exp
        * gdb.arch/amd64-disp-step.exp
        * gdb.arch/amd64-dword.exp
        * gdb.arch/amd64-entry-value-inline.exp
        * gdb.arch/amd64-entry-value-param.exp
        * gdb.arch/amd64-entry-value-paramref.exp
        * gdb.arch/amd64-entry-value.exp
        * gdb.arch/amd64-i386-address.exp
        * gdb.arch/amd64-invalid-stack-middle.exp
        * gdb.arch/amd64-invalid-stack-top.exp
        * gdb.arch/amd64-optimout-repeat.exp
        * gdb.arch/amd64-prologue-skip.exp
        * gdb.arch/amd64-prologue-xmm.exp
        * gdb.arch/amd64-stap-special-operands.exp
        * gdb.arch/amd64-stap-wrong-subexp.exp
        * gdb.arch/amd64-tailcall-cxx.exp
        * gdb.arch/amd64-tailcall-noret.exp
        * gdb.arch/amd64-tailcall-ret.exp
        * gdb.arch/amd64-tailcall-self.exp
        * gdb.arch/amd64-word.exp
        * gdb.arch/arm-bl-branch-dest.exp
        * gdb.arch/arm-disp-step.exp
        * gdb.arch/arm-neon.exp
        * gdb.arch/arm-single-step-kernel-helper.exp
        * gdb.arch/avr-flash-qualifier.exp
        * gdb.arch/disp-step-insn-reloc.exp
        * gdb.arch/e500-abi.exp
        * gdb.arch/e500-regs.exp
        * gdb.arch/ftrace-insn-reloc.exp
        * gdb.arch/i386-avx512.exp
        * gdb.arch/i386-bp_permanent.exp
        * gdb.arch/i386-byte.exp
        * gdb.arch/i386-cfi-notcurrent.exp
        * gdb.arch/i386-disp-step.exp
        * gdb.arch/i386-dr3-watch.exp
        * gdb.arch/i386-float.exp
        * gdb.arch/i386-gnu-cfi.exp
        * gdb.arch/i386-mpx-map.exp
        * gdb.arch/i386-mpx-sigsegv.exp
        * gdb.arch/i386-mpx-simple_segv.exp
        * gdb.arch/i386-mpx.exp
        * gdb.arch/i386-permbkpt.exp
        * gdb.arch/i386-prologue.exp
        * gdb.arch/i386-signal.exp
        * gdb.arch/i386-size-overlap.exp
        * gdb.arch/i386-unwind.exp
        * gdb.arch/i386-word.exp
        * gdb.arch/mips-fcr.exp
        * gdb.arch/powerpc-d128-regs.exp
        * gdb.arch/powerpc-stackless.exp
        * gdb.arch/ppc64-atomic-inst.exp
        * gdb.arch/s390-stackless.exp
        * gdb.arch/s390-tdbregs.exp
        * gdb.arch/s390-vregs.exp
        * gdb.arch/sparc-sysstep.exp
        * gdb.arch/thumb-bx-pc.exp
        * gdb.arch/thumb-singlestep.exp
        * gdb.arch/thumb2-it.exp
        * gdb.arch/vsx-regs.exp
        * gdb.asm/asm-source.exp
        * gdb.base/a2-run.exp
        * gdb.base/advance.exp
        * gdb.base/all-bin.exp
        * gdb.base/anon.exp
        * gdb.base/args.exp
        * gdb.base/arithmet.exp
        * gdb.base/async-shell.exp
        * gdb.base/async.exp
        * gdb.base/attach-pie-noexec.exp
        * gdb.base/attach-twice.exp
        * gdb.base/auto-load.exp
        * gdb.base/bang.exp
        * gdb.base/bitfields.exp
        * gdb.base/break-always.exp
        * gdb.base/break-caller-line.exp
        * gdb.base/break-entry.exp
        * gdb.base/break-inline.exp
        * gdb.base/break-on-linker-gcd-function.exp
        * gdb.base/break-probes.exp
        * gdb.base/break.exp
        * gdb.base/breakpoint-shadow.exp
        * gdb.base/call-ar-st.exp
        * gdb.base/call-sc.exp
        * gdb.base/call-signal-resume.exp
        * gdb.base/call-strs.exp
        * gdb.base/callfuncs.exp
        * gdb.base/catch-fork-static.exp
        * gdb.base/catch-gdb-caused-signals.exp
        * gdb.base/catch-load.exp
        * gdb.base/catch-signal-fork.exp
        * gdb.base/catch-signal.exp
        * gdb.base/catch-syscall.exp
        * gdb.base/charset.exp
        * gdb.base/checkpoint.exp
        * gdb.base/chng-syms.exp
        * gdb.base/code-expr.exp
        * gdb.base/code_elim.exp
        * gdb.base/commands.exp
        * gdb.base/completion.exp
        * gdb.base/complex.exp
        * gdb.base/cond-expr.exp
        * gdb.base/condbreak.exp
        * gdb.base/consecutive.exp
        * gdb.base/continue-all-already-running.exp
        * gdb.base/coredump-filter.exp
        * gdb.base/corefile.exp
        * gdb.base/dbx.exp
        * gdb.base/debug-expr.exp
        * gdb.base/define.exp
        * gdb.base/del.exp
        * gdb.base/disabled-location.exp
        * gdb.base/disasm-end-cu.exp
        * gdb.base/disasm-optim.exp
        * gdb.base/display.exp
        * gdb.base/duplicate-bp.exp
        * gdb.base/ena-dis-br.exp
        * gdb.base/ending-run.exp
        * gdb.base/enumval.exp
        * gdb.base/environ.exp
        * gdb.base/eu-strip-infcall.exp
        * gdb.base/eval-avoid-side-effects.exp
        * gdb.base/eval-skip.exp
        * gdb.base/exitsignal.exp
        * gdb.base/expand-psymtabs.exp
        * gdb.base/filesym.exp
        * gdb.base/find-unmapped.exp
        * gdb.base/finish.exp
        * gdb.base/float.exp
        * gdb.base/foll-exec-mode.exp
        * gdb.base/foll-exec.exp
        * gdb.base/foll-fork.exp
        * gdb.base/fortran-sym-case.exp
        * gdb.base/freebpcmd.exp
        * gdb.base/func-ptr.exp
        * gdb.base/func-ptrs.exp
        * gdb.base/funcargs.exp
        * gdb.base/gcore-buffer-overflow.exp
        * gdb.base/gcore-relro-pie.exp
        * gdb.base/gcore-relro.exp
        * gdb.base/gcore.exp
        * gdb.base/gdb1090.exp
        * gdb.base/gdb11530.exp
        * gdb.base/gdb11531.exp
        * gdb.base/gdb1821.exp
        * gdb.base/gdbindex-stabs.exp
        * gdb.base/gdbvars.exp
        * gdb.base/hbreak.exp
        * gdb.base/hbreak2.exp
        * gdb.base/included.exp
        * gdb.base/infcall-input.exp
        * gdb.base/inferior-died.exp
        * gdb.base/infnan.exp
        * gdb.base/info-macros.exp
        * gdb.base/info-os.exp
        * gdb.base/info-proc.exp
        * gdb.base/info-shared.exp
        * gdb.base/info-target.exp
        * gdb.base/infoline.exp
        * gdb.base/interp.exp
        * gdb.base/interrupt.exp
        * gdb.base/jit-reader.exp
        * gdb.base/jit-simple.exp
        * gdb.base/kill-after-signal.exp
        * gdb.base/kill-detach-inferiors-cmd.exp
        * gdb.base/label.exp
        * gdb.base/langs.exp
        * gdb.base/ldbl_e308.exp
        * gdb.base/line-symtabs.exp
        * gdb.base/linespecs.exp
        * gdb.base/list.exp
        * gdb.base/long_long.exp
        * gdb.base/longest-types.exp
        * gdb.base/maint.exp
        * gdb.base/max-value-size.exp
        * gdb.base/memattr.exp
        * gdb.base/mips_pro.exp
        * gdb.base/morestack.exp
        * gdb.base/moribund-step.exp
        * gdb.base/multi-forks.exp
        * gdb.base/nested-addr.exp
        * gdb.base/nextoverexit.exp
        * gdb.base/noreturn-finish.exp
        * gdb.base/noreturn-return.exp
        * gdb.base/nostdlib.exp
        * gdb.base/offsets.exp
        * gdb.base/opaque.exp
        * gdb.base/pc-fp.exp
        * gdb.base/permissions.exp
        * gdb.base/print-symbol-loading.exp
        * gdb.base/prologue-include.exp
        * gdb.base/psymtab.exp
        * gdb.base/ptype.exp
        * gdb.base/random-signal.exp
        * gdb.base/randomize.exp
        * gdb.base/range-stepping.exp
        * gdb.base/readline-ask.exp
        * gdb.base/recpar.exp
        * gdb.base/recurse.exp
        * gdb.base/relational.exp
        * gdb.base/restore.exp
        * gdb.base/return-nodebug.exp
        * gdb.base/return.exp
        * gdb.base/run-after-attach.exp
        * gdb.base/save-bp.exp
        * gdb.base/scope.exp
        * gdb.base/sect-cmd.exp
        * gdb.base/set-lang-auto.exp
        * gdb.base/set-noassign.exp
        * gdb.base/setvar.exp
        * gdb.base/sigall.exp
        * gdb.base/sigbpt.exp
        * gdb.base/siginfo-addr.exp
        * gdb.base/siginfo-infcall.exp
        * gdb.base/siginfo-obj.exp
        * gdb.base/siginfo.exp
        * gdb.base/signals-state-child.exp
        * gdb.base/signest.exp
        * gdb.base/sigstep.exp
        * gdb.base/sizeof.exp
        * gdb.base/skip.exp
        * gdb.base/solib-corrupted.exp
        * gdb.base/solib-nodir.exp
        * gdb.base/solib-search.exp
        * gdb.base/stack-checking.exp
        * gdb.base/stale-infcall.exp
        * gdb.base/stap-probe.exp
        * gdb.base/start.exp
        * gdb.base/step-break.exp
        * gdb.base/step-bt.exp
        * gdb.base/step-line.exp
        * gdb.base/step-over-exit.exp
        * gdb.base/step-over-syscall.exp
        * gdb.base/step-resume-infcall.exp
        * gdb.base/step-test.exp
        * gdb.base/store.exp
        * gdb.base/structs3.exp
        * gdb.base/sym-file.exp
        * gdb.base/symbol-without-target_section.exp
        * gdb.base/term.exp
        * gdb.base/testenv.exp
        * gdb.base/ui-redirect.exp
        * gdb.base/until.exp
        * gdb.base/unwindonsignal.exp
        * gdb.base/value-double-free.exp
        * gdb.base/vla-datatypes.exp
        * gdb.base/vla-ptr.exp
        * gdb.base/vla-sideeffect.exp
        * gdb.base/volatile.exp
        * gdb.base/watch-cond-infcall.exp
        * gdb.base/watch-cond.exp
        * gdb.base/watch-non-mem.exp
        * gdb.base/watch-read.exp
        * gdb.base/watch-vfork.exp
        * gdb.base/watchpoint-cond-gone.exp
        * gdb.base/watchpoint-delete.exp
        * gdb.base/watchpoint-hw-hit-once.exp
        * gdb.base/watchpoint-hw.exp
        * gdb.base/watchpoint-stops-at-right-insn.exp
        * gdb.base/watchpoints.exp
        * gdb.base/wchar.exp
        * gdb.base/whatis-exp.exp
        * gdb.btrace/buffer-size.exp
        * gdb.btrace/data.exp
        * gdb.btrace/delta.exp
        * gdb.btrace/dlopen.exp
        * gdb.btrace/enable.exp
        * gdb.btrace/exception.exp
        * gdb.btrace/function_call_history.exp
        * gdb.btrace/gcore.exp
        * gdb.btrace/instruction_history.exp
        * gdb.btrace/nohist.exp
        * gdb.btrace/reconnect.exp
        * gdb.btrace/record_goto-step.exp
        * gdb.btrace/record_goto.exp
        * gdb.btrace/rn-dl-bind.exp
        * gdb.btrace/segv.exp
        * gdb.btrace/step.exp
        * gdb.btrace/stepi.exp
        * gdb.btrace/tailcall-only.exp
        * gdb.btrace/tailcall.exp
        * gdb.btrace/tsx.exp
        * gdb.btrace/unknown_functions.exp
        * gdb.btrace/vdso.exp
        * gdb.compile/compile-ifunc.exp
        * gdb.compile/compile-ops.exp
        * gdb.compile/compile-print.exp
        * gdb.compile/compile-setjmp.exp
        * gdb.cp/abstract-origin.exp
        * gdb.cp/ambiguous.exp
        * gdb.cp/annota2.exp
        * gdb.cp/annota3.exp
        * gdb.cp/anon-ns.exp
        * gdb.cp/anon-struct.exp
        * gdb.cp/anon-union.exp
        * gdb.cp/arg-reference.exp
        * gdb.cp/baseenum.exp
        * gdb.cp/bool.exp
        * gdb.cp/breakpoint.exp
        * gdb.cp/bs15503.exp
        * gdb.cp/call-c.exp
        * gdb.cp/casts.exp
        * gdb.cp/chained-calls.exp
        * gdb.cp/class2.exp
        * gdb.cp/classes.exp
        * gdb.cp/cmpd-minsyms.exp
        * gdb.cp/converts.exp
        * gdb.cp/cp-relocate.exp
        * gdb.cp/cpcompletion.exp
        * gdb.cp/cpexprs.exp
        * gdb.cp/cplabel.exp
        * gdb.cp/cplusfuncs.exp
        * gdb.cp/cpsizeof.exp
        * gdb.cp/ctti.exp
        * gdb.cp/derivation.exp
        * gdb.cp/destrprint.exp
        * gdb.cp/dispcxx.exp
        * gdb.cp/enum-class.exp
        * gdb.cp/exception.exp
        * gdb.cp/exceptprint.exp
        * gdb.cp/expand-psymtabs-cxx.exp
        * gdb.cp/expand-sals.exp
        * gdb.cp/extern-c.exp
        * gdb.cp/filename.exp
        * gdb.cp/formatted-ref.exp
        * gdb.cp/fpointer.exp
        * gdb.cp/gdb1355.exp
        * gdb.cp/gdb2495.exp
        * gdb.cp/hang.exp
        * gdb.cp/impl-this.exp
        * gdb.cp/infcall-dlopen.exp
        * gdb.cp/inherit.exp
        * gdb.cp/iostream.exp
        * gdb.cp/koenig.exp
        * gdb.cp/local.exp
        * gdb.cp/m-data.exp
        * gdb.cp/m-static.exp
        * gdb.cp/mb-ctor.exp
        * gdb.cp/mb-inline.exp
        * gdb.cp/mb-templates.exp
        * gdb.cp/member-name.exp
        * gdb.cp/member-ptr.exp
        * gdb.cp/meth-typedefs.exp
        * gdb.cp/method.exp
        * gdb.cp/method2.exp
        * gdb.cp/minsym-fallback.exp
        * gdb.cp/misc.exp
        * gdb.cp/namelessclass.exp
        * gdb.cp/namespace-enum.exp
        * gdb.cp/namespace-nested-import.exp
        * gdb.cp/namespace.exp
        * gdb.cp/nextoverthrow.exp
        * gdb.cp/no-dmgl-verbose.exp
        * gdb.cp/non-trivial-retval.exp
        * gdb.cp/noparam.exp
        * gdb.cp/nsdecl.exp
        * gdb.cp/nsimport.exp
        * gdb.cp/nsnested.exp
        * gdb.cp/nsnoimports.exp
        * gdb.cp/nsrecurs.exp
        * gdb.cp/nsstress.exp
        * gdb.cp/nsusing.exp
        * gdb.cp/operator.exp
        * gdb.cp/oranking.exp
        * gdb.cp/overload-const.exp
        * gdb.cp/overload.exp
        * gdb.cp/ovldbreak.exp
        * gdb.cp/ovsrch.exp
        * gdb.cp/paren-type.exp
        * gdb.cp/parse-lang.exp
        * gdb.cp/pass-by-ref.exp
        * gdb.cp/pr-1023.exp
        * gdb.cp/pr-1210.exp
        * gdb.cp/pr-574.exp
        * gdb.cp/pr10687.exp
        * gdb.cp/pr12028.exp
        * gdb.cp/pr17132.exp
        * gdb.cp/pr17494.exp
        * gdb.cp/pr9067.exp
        * gdb.cp/pr9167.exp
        * gdb.cp/pr9631.exp
        * gdb.cp/printmethod.exp
        * gdb.cp/psmang.exp
        * gdb.cp/psymtab-parameter.exp
        * gdb.cp/ptype-cv-cp.exp
        * gdb.cp/ptype-flags.exp
        * gdb.cp/re-set-overloaded.exp
        * gdb.cp/ref-types.exp
        * gdb.cp/rtti.exp
        * gdb.cp/scope-err.exp
        * gdb.cp/shadow.exp
        * gdb.cp/smartp.exp
        * gdb.cp/static-method.exp
        * gdb.cp/static-print-quit.exp
        * gdb.cp/temargs.exp
        * gdb.cp/templates.exp
        * gdb.cp/try_catch.exp
        * gdb.cp/typedef-operator.exp
        * gdb.cp/typeid.exp
        * gdb.cp/userdef.exp
        * gdb.cp/using-crash.exp
        * gdb.cp/var-tag.exp
        * gdb.cp/virtbase.exp
        * gdb.cp/virtfunc.exp
        * gdb.cp/virtfunc2.exp
        * gdb.cp/vla-cxx.exp
        * gdb.disasm/t01_mov.exp
        * gdb.disasm/t02_mova.exp
        * gdb.disasm/t03_add.exp
        * gdb.disasm/t04_sub.exp
        * gdb.disasm/t05_cmp.exp
        * gdb.disasm/t06_ari2.exp
        * gdb.disasm/t07_ari3.exp
        * gdb.disasm/t08_or.exp
        * gdb.disasm/t09_xor.exp
        * gdb.disasm/t10_and.exp
        * gdb.disasm/t11_logs.exp
        * gdb.disasm/t12_bit.exp
        * gdb.disasm/t13_otr.exp
        * gdb.dlang/circular.exp
        * gdb.dwarf2/arr-stride.exp
        * gdb.dwarf2/arr-subrange.exp
        * gdb.dwarf2/atomic-type.exp
        * gdb.dwarf2/bad-regnum.exp
        * gdb.dwarf2/bitfield-parent-optimized-out.exp
        * gdb.dwarf2/callframecfa.exp
        * gdb.dwarf2/clztest.exp
        * gdb.dwarf2/corrupt.exp
        * gdb.dwarf2/data-loc.exp
        * gdb.dwarf2/dup-psym.exp
        * gdb.dwarf2/dw2-anon-mptr.exp
        * gdb.dwarf2/dw2-anonymous-func.exp
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp
        * gdb.dwarf2/dw2-bad-unresolved.exp
        * gdb.dwarf2/dw2-basic.exp
        * gdb.dwarf2/dw2-canonicalize-type.exp
        * gdb.dwarf2/dw2-case-insensitive.exp
        * gdb.dwarf2/dw2-common-block.exp
        * gdb.dwarf2/dw2-compdir-oldgcc.exp
        * gdb.dwarf2/dw2-compressed.exp
        * gdb.dwarf2/dw2-const.exp
        * gdb.dwarf2/dw2-cp-infcall-ref-static.exp
        * gdb.dwarf2/dw2-cu-size.exp
        * gdb.dwarf2/dw2-dup-frame.exp
        * gdb.dwarf2/dw2-entry-value.exp
        * gdb.dwarf2/dw2-icycle.exp
        * gdb.dwarf2/dw2-ifort-parameter.exp
        * gdb.dwarf2/dw2-inline-break.exp
        * gdb.dwarf2/dw2-inline-param.exp
        * gdb.dwarf2/dw2-intercu.exp
        * gdb.dwarf2/dw2-intermix.exp
        * gdb.dwarf2/dw2-lexical-block-bare.exp
        * gdb.dwarf2/dw2-linkage-name-trust.exp
        * gdb.dwarf2/dw2-minsym-in-cu.exp
        * gdb.dwarf2/dw2-noloc.exp
        * gdb.dwarf2/dw2-op-call.exp
        * gdb.dwarf2/dw2-op-out-param.exp
        * gdb.dwarf2/dw2-opt-structptr.exp
        * gdb.dwarf2/dw2-param-error.exp
        * gdb.dwarf2/dw2-producer.exp
        * gdb.dwarf2/dw2-ranges-base.exp
        * gdb.dwarf2/dw2-ref-missing-frame.exp
        * gdb.dwarf2/dw2-reg-undefined.exp
        * gdb.dwarf2/dw2-regno-invalid.exp
        * gdb.dwarf2/dw2-restore.exp
        * gdb.dwarf2/dw2-restrict.exp
        * gdb.dwarf2/dw2-single-line-discriminators.exp
        * gdb.dwarf2/dw2-strp.exp
        * gdb.dwarf2/dw2-undefined-ret-addr.exp
        * gdb.dwarf2/dw2-unresolved.exp
        * gdb.dwarf2/dw2-var-zero-addr.exp
        * gdb.dwarf2/dw4-sig-types.exp
        * gdb.dwarf2/dwz.exp
        * gdb.dwarf2/dynarr-ptr.exp
        * gdb.dwarf2/enum-type.exp
        * gdb.dwarf2/gdb-index.exp
        * gdb.dwarf2/implptr-64bit.exp
        * gdb.dwarf2/implptr-optimized-out.exp
        * gdb.dwarf2/implptr.exp
        * gdb.dwarf2/implref-array.exp
        * gdb.dwarf2/implref-const.exp
        * gdb.dwarf2/implref-global.exp
        * gdb.dwarf2/implref-struct.exp
        * gdb.dwarf2/mac-fileno.exp
        * gdb.dwarf2/main-subprogram.exp
        * gdb.dwarf2/member-ptr-forwardref.exp
        * gdb.dwarf2/method-ptr.exp
        * gdb.dwarf2/missing-sig-type.exp
        * gdb.dwarf2/nonvar-access.exp
        * gdb.dwarf2/opaque-type-lookup.exp
        * gdb.dwarf2/pieces-optimized-out.exp
        * gdb.dwarf2/pieces.exp
        * gdb.dwarf2/pr10770.exp
        * gdb.dwarf2/pr13961.exp
        * gdb.dwarf2/staticvirtual.exp
        * gdb.dwarf2/subrange.exp
        * gdb.dwarf2/symtab-producer.exp
        * gdb.dwarf2/trace-crash.exp
        * gdb.dwarf2/typeddwarf.exp
        * gdb.dwarf2/valop.exp
        * gdb.dwarf2/watch-notconst.exp
        * gdb.fortran/array-element.exp
        * gdb.fortran/charset.exp
        * gdb.fortran/common-block.exp
        * gdb.fortran/complex.exp
        * gdb.fortran/derived-type-function.exp
        * gdb.fortran/derived-type.exp
        * gdb.fortran/logical.exp
        * gdb.fortran/module.exp
        * gdb.fortran/multi-dim.exp
        * gdb.fortran/nested-funcs.exp
        * gdb.fortran/print-formatted.exp
        * gdb.fortran/subarray.exp
        * gdb.fortran/vla-alloc-assoc.exp
        * gdb.fortran/vla-datatypes.exp
        * gdb.fortran/vla-history.exp
        * gdb.fortran/vla-ptr-info.exp
        * gdb.fortran/vla-ptype-sub.exp
        * gdb.fortran/vla-ptype.exp
        * gdb.fortran/vla-sizeof.exp
        * gdb.fortran/vla-type.exp
        * gdb.fortran/vla-value-sub-arbitrary.exp
        * gdb.fortran/vla-value-sub-finish.exp
        * gdb.fortran/vla-value-sub.exp
        * gdb.fortran/vla-value.exp
        * gdb.fortran/whatis_type.exp
        * gdb.go/chan.exp
        * gdb.go/handcall.exp
        * gdb.go/hello.exp
        * gdb.go/integers.exp
        * gdb.go/methods.exp
        * gdb.go/package.exp
        * gdb.go/strings.exp
        * gdb.go/types.exp
        * gdb.go/unsafe.exp
        * gdb.guile/scm-arch.exp
        * gdb.guile/scm-block.exp
        * gdb.guile/scm-breakpoint.exp
        * gdb.guile/scm-cmd.exp
        * gdb.guile/scm-disasm.exp
        * gdb.guile/scm-equal.exp
        * gdb.guile/scm-frame-args.exp
        * gdb.guile/scm-frame-inline.exp
        * gdb.guile/scm-frame.exp
        * gdb.guile/scm-iterator.exp
        * gdb.guile/scm-math.exp
        * gdb.guile/scm-objfile.exp
        * gdb.guile/scm-ports.exp
        * gdb.guile/scm-symbol.exp
        * gdb.guile/scm-symtab.exp
        * gdb.guile/scm-value-cc.exp
        * gdb.guile/types-module.exp
        * gdb.linespec/break-ask.exp
        * gdb.linespec/cpexplicit.exp
        * gdb.linespec/explicit.exp
        * gdb.linespec/keywords.exp
        * gdb.linespec/linespec.exp
        * gdb.linespec/ls-dollar.exp
        * gdb.linespec/ls-errs.exp
        * gdb.linespec/skip-two.exp
        * gdb.linespec/thread.exp
        * gdb.mi/mi-async.exp
        * gdb.mi/mi-basics.exp
        * gdb.mi/mi-break.exp
        * gdb.mi/mi-catch-load.exp
        * gdb.mi/mi-cli.exp
        * gdb.mi/mi-cmd-param-changed.exp
        * gdb.mi/mi-console.exp
        * gdb.mi/mi-detach.exp
        * gdb.mi/mi-disassemble.exp
        * gdb.mi/mi-eval.exp
        * gdb.mi/mi-file-transfer.exp
        * gdb.mi/mi-file.exp
        * gdb.mi/mi-fill-memory.exp
        * gdb.mi/mi-inheritance-syntax-error.exp
        * gdb.mi/mi-linespec-err-cp.exp
        * gdb.mi/mi-logging.exp
        * gdb.mi/mi-memory-changed.exp
        * gdb.mi/mi-read-memory.exp
        * gdb.mi/mi-record-changed.exp
        * gdb.mi/mi-reg-undefined.exp
        * gdb.mi/mi-regs.exp
        * gdb.mi/mi-return.exp
        * gdb.mi/mi-reverse.exp
        * gdb.mi/mi-simplerun.exp
        * gdb.mi/mi-solib.exp
        * gdb.mi/mi-stack.exp
        * gdb.mi/mi-stepi.exp
        * gdb.mi/mi-syn-frame.exp
        * gdb.mi/mi-until.exp
        * gdb.mi/mi-var-block.exp
        * gdb.mi/mi-var-child.exp
        * gdb.mi/mi-var-cmd.exp
        * gdb.mi/mi-var-cp.exp
        * gdb.mi/mi-var-display.exp
        * gdb.mi/mi-var-invalidate.exp
        * gdb.mi/mi-var-list-children-invalid-grandchild.exp
        * gdb.mi/mi-vla-fortran.exp
        * gdb.mi/mi-watch.exp
        * gdb.mi/mi2-var-child.exp
        * gdb.mi/user-selected-context-sync.exp
        * gdb.modula2/unbounded-array.exp
        * gdb.multi/dummy-frame-restore.exp
        * gdb.multi/multi-arch-exec.exp
        * gdb.multi/multi-arch.exp
        * gdb.multi/tids.exp
        * gdb.multi/watchpoint-multi.exp
        * gdb.opencl/callfuncs.exp
        * gdb.opencl/convs_casts.exp
        * gdb.opencl/datatypes.exp
        * gdb.opencl/operators.exp
        * gdb.opencl/vec_comps.exp
        * gdb.opt/clobbered-registers-O2.exp
        * gdb.opt/inline-break.exp
        * gdb.opt/inline-bt.exp
        * gdb.opt/inline-cmds.exp
        * gdb.opt/inline-locals.exp
        * gdb.pascal/case-insensitive-symbols.exp
        * gdb.pascal/floats.exp
        * gdb.pascal/gdb11492.exp
        * gdb.python/lib-types.exp
        * gdb.python/py-arch.exp
        * gdb.python/py-as-string.exp
        * gdb.python/py-bad-printers.exp
        * gdb.python/py-block.exp
        * gdb.python/py-breakpoint-create-fail.exp
        * gdb.python/py-breakpoint.exp
        * gdb.python/py-caller-is.exp
        * gdb.python/py-cmd.exp
        * gdb.python/py-explore-cc.exp
        * gdb.python/py-explore.exp
        * gdb.python/py-finish-breakpoint.exp
        * gdb.python/py-finish-breakpoint2.exp
        * gdb.python/py-frame-args.exp
        * gdb.python/py-frame-inline.exp
        * gdb.python/py-frame.exp
        * gdb.python/py-framefilter-mi.exp
        * gdb.python/py-infthread.exp
        * gdb.python/py-lazy-string.exp
        * gdb.python/py-linetable.exp
        * gdb.python/py-mi-events.exp
        * gdb.python/py-mi-objfile.exp
        * gdb.python/py-mi.exp
        * gdb.python/py-objfile.exp
        * gdb.python/py-pp-integral.exp
        * gdb.python/py-pp-maint.exp
        * gdb.python/py-pp-re-notag.exp
        * gdb.python/py-pp-registration.exp
        * gdb.python/py-recurse-unwind.exp
        * gdb.python/py-strfns.exp
        * gdb.python/py-symbol.exp
        * gdb.python/py-symtab.exp
        * gdb.python/py-sync-interp.exp
        * gdb.python/py-typeprint.exp
        * gdb.python/py-unwind-maint.exp
        * gdb.python/py-unwind.exp
        * gdb.python/py-value-cc.exp
        * gdb.python/py-xmethods.exp
        * gdb.reverse/amd64-tailcall-reverse.exp
        * gdb.reverse/break-precsave.exp
        * gdb.reverse/break-reverse.exp
        * gdb.reverse/consecutive-precsave.exp
        * gdb.reverse/consecutive-reverse.exp
        * gdb.reverse/finish-precsave.exp
        * gdb.reverse/finish-reverse-bkpt.exp
        * gdb.reverse/finish-reverse.exp
        * gdb.reverse/fstatat-reverse.exp
        * gdb.reverse/getresuid-reverse.exp
        * gdb.reverse/i386-precsave.exp
        * gdb.reverse/i386-reverse.exp
        * gdb.reverse/i386-sse-reverse.exp
        * gdb.reverse/i387-env-reverse.exp
        * gdb.reverse/i387-stack-reverse.exp
        * gdb.reverse/insn-reverse.exp
        * gdb.reverse/machinestate-precsave.exp
        * gdb.reverse/machinestate.exp
        * gdb.reverse/next-reverse-bkpt-over-sr.exp
        * gdb.reverse/pipe-reverse.exp
        * gdb.reverse/readv-reverse.exp
        * gdb.reverse/recvmsg-reverse.exp
        * gdb.reverse/rerun-prec.exp
        * gdb.reverse/s390-mvcle.exp
        * gdb.reverse/step-precsave.exp
        * gdb.reverse/step-reverse.exp
        * gdb.reverse/time-reverse.exp
        * gdb.reverse/until-precsave.exp
        * gdb.reverse/until-reverse.exp
        * gdb.reverse/waitpid-reverse.exp
        * gdb.reverse/watch-precsave.exp
        * gdb.reverse/watch-reverse.exp
        * gdb.rust/generics.exp
        * gdb.rust/methods.exp
        * gdb.rust/modules.exp
        * gdb.rust/simple.exp
        * gdb.server/connect-with-no-symbol-file.exp
        * gdb.server/ext-attach.exp
        * gdb.server/ext-restart.exp
        * gdb.server/ext-wrapper.exp
        * gdb.server/file-transfer.exp
        * gdb.server/server-exec-info.exp
        * gdb.server/server-kill.exp
        * gdb.server/server-mon.exp
        * gdb.server/wrapper.exp
        * gdb.stabs/exclfwd.exp
        * gdb.stabs/gdb11479.exp
        * gdb.threads/clone-new-thread-event.exp
        * gdb.threads/corethreads.exp
        * gdb.threads/current-lwp-dead.exp
        * gdb.threads/dlopen-libpthread.exp
        * gdb.threads/gcore-thread.exp
        * gdb.threads/sigstep-threads.exp
        * gdb.threads/watchpoint-fork.exp
        * gdb.trace/actions-changed.exp
        * gdb.trace/backtrace.exp
        * gdb.trace/change-loc.exp
        * gdb.trace/circ.exp
        * gdb.trace/collection.exp
        * gdb.trace/disconnected-tracing.exp
        * gdb.trace/ftrace.exp
        * gdb.trace/mi-trace-frame-collected.exp
        * gdb.trace/mi-trace-unavailable.exp
        * gdb.trace/mi-traceframe-changed.exp
        * gdb.trace/mi-tsv-changed.exp
        * gdb.trace/no-attach-trace.exp
        * gdb.trace/passc-dyn.exp
        * gdb.trace/qtro.exp
        * gdb.trace/range-stepping.exp
        * gdb.trace/read-memory.exp
        * gdb.trace/save-trace.exp
        * gdb.trace/signal.exp
        * gdb.trace/status-stop.exp
        * gdb.trace/tfile.exp
        * gdb.trace/trace-break.exp
        * gdb.trace/trace-buffer-size.exp
        * gdb.trace/trace-condition.exp
        * gdb.trace/tracefile-pseudo-reg.exp
        * gdb.trace/tstatus.exp
        * gdb.trace/unavailable.exp
        * gdb.trace/while-dyn.exp
        * gdb.trace/while-stepping.exp

2016-12-22  Doug Evans  <xdje42@gmail.com>

        * gdb.base/maint.exp: Update tests for maint print symbols, psymbols
        and msymbols.

2016-12-19  Yao Qi  <yao.qi@linaro.org>

        * gdb.gdb/selftest.exp (do_steps_and_nexts): Remove.
        (test_with_self): Don't call do_steps_and_nexts, and remove
        code about stepping into xmalloc.

2016-12-09  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/all-architectures.exp.in: Remove kfail for rx.

2016-12-09  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/all-architectures.exp.in: Remove kfail for rl78.

2016-12-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/all-architectures-0.exp: New file.
        * gdb.base/all-architectures-1.exp: New file.
        * gdb.base/all-architectures-2.exp: New file.
        * gdb.base/all-architectures-3.exp: New file.
        * gdb.base/all-architectures-4.exp: New file.
        * gdb.base/all-architectures-5.exp: New file.
        * gdb.base/all-architectures-6.exp: New file.
        * gdb.base/all-architectures-7.exp: New file.
        * gdb.base/all-architectures.exp.in: New file.

2016-12-09  Yao Qi  <yao.qi@linaro.org>

        * gdb.perf/skip-prologue.exp: Add parameter COMPILE.

2016-12-02  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/maint.exp: Use gdb_test instead of gdb_test_multiple when
        possible.
        Remove useless pattern-matching code.

2016-12-02  Pedro Alves  <palves@redhat.com>

        * gdb.base/commands.exp (user_defined_command_manyargs_test): New
        procedure.
        (top level): Call it.

2016-12-02  Pedro Alves  <palves@redhat.com>

        * gdb.base/commands.exp (user_defined_command_args_stack_test):
        New procedure.
        (top level): Call it.

2016-12-02  Pedro Alves  <palves@redhat.com>

        PR cli/20559
        * gdb.base/commands.exp (user_defined_command_args_eval): New
        procedure.
        (top level): Call it.

2016-12-02  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/ovldbreak.exp (take_gdb_out_of_choice_menu): Restore
        timeout handling.

2016-12-02  Tom Tromey  <tom@tromey.com>

        * gdb.dwarf2/main-subprogram.c: New file.
        * gdb.dwarf2/main-subprogram.exp: New file.

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/maint.exp: Remove timeout handling for gdb_test_multiple.
        * gdb.cp/gdb2495.exp: Likewise and convert gdb_test_multiple into
        gdb_test_no_output for a couple of cases.
        * gdb.cp/ovldbreak.exp: Remove timeout handling for gdb_test_multiple.

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names and standardize compilation error messages throughout
        the following files:

        * gdb.ada/start.exp
        * gdb.arch/alpha-step.exp
        * gdb.arch/e500-prologue.exp
        * gdb.arch/ftrace-insn-reloc.exp
        * gdb.arch/gdb1291.exp
        * gdb.arch/gdb1431.exp
        * gdb.arch/gdb1558.exp
        * gdb.arch/i386-dr3-watch.exp
        * gdb.arch/i386-sse-stack-align.exp
        * gdb.arch/ia64-breakpoint-shadow.exp
        * gdb.arch/pa-nullify.exp
        * gdb.arch/powerpc-aix-prologue.exp
        * gdb.arch/thumb-bx-pc.exp
        * gdb.base/annota1.exp
        * gdb.base/annota3.exp
        * gdb.base/arrayidx.exp
        * gdb.base/assign.exp
        * gdb.base/attach.exp
        * gdb.base/auxv.exp
        * gdb.base/bang.exp
        * gdb.base/bfp-test.exp
        * gdb.base/bigcore.exp
        * gdb.base/bitfields2.exp
        * gdb.base/break-fun-addr.exp
        * gdb.base/break-probes.exp
        * gdb.base/call-rt-st.exp
        * gdb.base/callexit.exp
        * gdb.base/catch-fork-kill.exp
        * gdb.base/charset.exp
        * gdb.base/checkpoint.exp
        * gdb.base/comprdebug.exp
        * gdb.base/constvars.exp
        * gdb.base/coredump-filter.exp
        * gdb.base/cursal.exp
        * gdb.base/cvexpr.exp
        * gdb.base/detach.exp
        * gdb.base/display.exp
        * gdb.base/dmsym.exp
        * gdb.base/dprintf-pending.exp
        * gdb.base/dso2dso.exp
        * gdb.base/dtrace-probe.exp
        * gdb.base/dump.exp
        * gdb.base/enum_cond.exp
        * gdb.base/exe-lock.exp
        * gdb.base/exec-invalid-sysroot.exp
        * gdb.base/execl-update-breakpoints.exp
        * gdb.base/exprs.exp
        * gdb.base/fileio.exp
        * gdb.base/find.exp
        * gdb.base/finish.exp
        * gdb.base/fixsection.exp
        * gdb.base/foll-vfork.exp
        * gdb.base/frame-args.exp
        * gdb.base/gcore.exp
        * gdb.base/gdb1250.exp
        * gdb.base/global-var-nested-by-dso.exp
        * gdb.base/gnu-ifunc.exp
        * gdb.base/hashline1.exp
        * gdb.base/hashline2.exp
        * gdb.base/hashline3.exp
        * gdb.base/hbreak-in-shr-unsupported.exp
        * gdb.base/huge.exp
        * gdb.base/infcall-input.exp
        * gdb.base/info-fun.exp
        * gdb.base/info-shared.exp
        * gdb.base/jit-simple.exp
        * gdb.base/jit-so.exp
        * gdb.base/jit.exp
        * gdb.base/jump.exp
        * gdb.base/label.exp
        * gdb.base/lineinc.exp
        * gdb.base/logical.exp
        * gdb.base/longjmp.exp
        * gdb.base/macscp.exp
        * gdb.base/miscexprs.exp
        * gdb.base/new-ui-echo.exp
        * gdb.base/new-ui-pending-input.exp
        * gdb.base/new-ui.exp
        * gdb.base/nodebug.exp
        * gdb.base/nofield.exp
        * gdb.base/offsets.exp
        * gdb.base/overlays.exp
        * gdb.base/pending.exp
        * gdb.base/pointers.exp
        * gdb.base/pr11022.exp
        * gdb.base/printcmds.exp
        * gdb.base/prologue.exp
        * gdb.base/ptr-typedef.exp
        * gdb.base/realname-expand.exp
        * gdb.base/relativedebug.exp
        * gdb.base/relocate.exp
        * gdb.base/remote.exp
        * gdb.base/reread.exp
        * gdb.base/return2.exp
        * gdb.base/savedregs.exp
        * gdb.base/sep.exp
        * gdb.base/sepdebug.exp
        * gdb.base/sepsymtab.exp
        * gdb.base/set-inferior-tty.exp
        * gdb.base/setshow.exp
        * gdb.base/shlib-call.exp
        * gdb.base/sigaltstack.exp
        * gdb.base/siginfo-addr.exp
        * gdb.base/signals.exp
        * gdb.base/signull.exp
        * gdb.base/sigrepeat.exp
        * gdb.base/so-impl-ld.exp
        * gdb.base/solib-display.exp
        * gdb.base/solib-overlap.exp
        * gdb.base/solib-search.exp
        * gdb.base/solib-symbol.exp
        * gdb.base/structs.exp
        * gdb.base/structs2.exp
        * gdb.base/symtab-search-order.exp
        * gdb.base/twice.exp
        * gdb.base/unload.exp
        * gdb.base/varargs.exp
        * gdb.base/watchpoint-solib.exp
        * gdb.base/watchpoint.exp
        * gdb.base/whatis.exp
        * gdb.base/wrong_frame_bt_full.exp
        * gdb.btrace/dlopen.exp
        * gdb.cell/ea-standalone.exp
        * gdb.cell/ea-test.exp
        * gdb.cp/dispcxx.exp
        * gdb.cp/gdb2384.exp
        * gdb.cp/method2.exp
        * gdb.cp/nextoverthrow.exp
        * gdb.cp/pr10728.exp
        * gdb.disasm/am33.exp
        * gdb.disasm/h8300s.exp
        * gdb.disasm/mn10300.exp
        * gdb.disasm/sh3.exp
        * gdb.dwarf2/dw2-dir-file-name.exp
        * gdb.fortran/complex.exp
        * gdb.fortran/library-module.exp
        * gdb.guile/scm-pretty-print.exp
        * gdb.guile/scm-symbol.exp
        * gdb.guile/scm-type.exp
        * gdb.guile/scm-value.exp
        * gdb.linespec/linespec.exp
        * gdb.mi/gdb701.exp
        * gdb.mi/gdb792.exp
        * gdb.mi/mi-breakpoint-changed.exp
        * gdb.mi/mi-dprintf-pending.exp
        * gdb.mi/mi-dprintf.exp
        * gdb.mi/mi-exit-code.exp
        * gdb.mi/mi-pending.exp
        * gdb.mi/mi-solib.exp
        * gdb.mi/new-ui-mi-sync.exp
        * gdb.mi/pr11022.exp
        * gdb.mi/user-selected-context-sync.exp
        * gdb.opt/solib-intra-step.exp
        * gdb.python/py-events.exp
        * gdb.python/py-finish-breakpoint.exp
        * gdb.python/py-mi.exp
        * gdb.python/py-prettyprint.exp
        * gdb.python/py-shared.exp
        * gdb.python/py-symbol.exp
        * gdb.python/py-template.exp
        * gdb.python/py-type.exp
        * gdb.python/py-value.exp
        * gdb.reverse/solib-precsave.exp
        * gdb.reverse/solib-reverse.exp
        * gdb.server/solib-list.exp
        * gdb.stabs/weird.exp
        * gdb.threads/reconnect-signal.exp
        * gdb.threads/stepi-random-signal.exp
        * gdb.trace/actions.exp
        * gdb.trace/ax.exp
        * gdb.trace/backtrace.exp
        * gdb.trace/change-loc.exp
        * gdb.trace/deltrace.exp
        * gdb.trace/ftrace-lock.exp
        * gdb.trace/ftrace.exp
        * gdb.trace/infotrace.exp
        * gdb.trace/mi-tracepoint-changed.exp
        * gdb.trace/packetlen.exp
        * gdb.trace/passcount.exp
        * gdb.trace/pending.exp
        * gdb.trace/range-stepping.exp
        * gdb.trace/report.exp
        * gdb.trace/stap-trace.exp
        * gdb.trace/tfind.exp
        * gdb.trace/trace-break.exp
        * gdb.trace/trace-condition.exp
        * gdb.trace/trace-enable-disable.exp
        * gdb.trace/trace-mt.exp
        * gdb.trace/tracecmd.exp
        * gdb.trace/tspeed.exp
        * gdb.trace/tsv.exp
        * lib/perftest.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.cp/gdb2495.exp: Replace gdb_test_multiple
        with gdb_test_no_output.
        Use command as test name.

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout the files.

        * gdb.ada/assign_1.exp
        * gdb.ada/boolean_expr.exp
        * gdb.base/arrayidx.exp
        * gdb.base/del.exp
        * gdb.base/gcore-buffer-overflow.exp
        * gdb.base/testenv.exp
        * gdb.compile/compile.exp
        * gdb.python/py-framefilter-invalidarg.exp
        * gdb.python/py-framefilter.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout the files.

        * gdb.ada/array_return.exp
        * gdb.ada/expr_delims.exp
        * gdb.ada/mi_dyn_arr.exp
        * gdb.ada/mi_interface.exp
        * gdb.ada/mi_var_array.exp
        * gdb.ada/watch_arg.exp
        * gdb.arch/alpha-step.exp
        * gdb.arch/altivec-regs.exp
        * gdb.arch/e500-regs.exp
        * gdb.arch/powerpc-d128-regs.exp
        * gdb.base/arrayidx.exp
        * gdb.base/break.exp
        * gdb.base/checkpoint.exp
        * gdb.base/debug-expr.exp
        * gdb.base/dmsym.exp
        * gdb.base/radix.exp
        * gdb.base/sepdebug.exp
        * gdb.base/testenv.exp
        * gdb.base/watch_thread_num.exp
        * gdb.base/watchpoint-cond-gone.exp
        * gdb.cell/break.exp
        * gdb.cell/ea-cache.exp
        * gdb.compile/compile.exp
        * gdb.cp/gdb2495.exp
        * gdb.gdb/selftest.exp
        * gdb.gdb/xfullpath.exp
        * gdb.go/hello.exp
        * gdb.go/integers.exp
        * gdb.objc/basicclass.exp
        * gdb.pascal/hello.exp
        * gdb.pascal/integers.exp
        * gdb.python/py-breakpoint.exp
        * gdb.python/py-cmd.exp
        * gdb.python/py-linetable.exp
        * gdb.python/py-xmethods.exp
        * gdb.python/python.exp
        * gdb.reverse/consecutive-precsave.exp
        * gdb.reverse/finish-precsave.exp
        * gdb.reverse/i386-precsave.exp
        * gdb.reverse/machinestate-precsave.exp
        * gdb.reverse/sigall-precsave.exp
        * gdb.reverse/solib-precsave.exp
        * gdb.reverse/step-precsave.exp
        * gdb.reverse/until-precsave.exp
        * gdb.reverse/watch-precsave.exp
        * gdb.threads/leader-exit.exp
        * gdb.threads/pthreads.exp
        * gdb.threads/wp-replication.exp
        * gdb.trace/actions.exp
        * gdb.trace/mi-tsv-changed.exp
        * gdb.trace/tsv.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout the files.

        * gdb.arch/i386-bp_permanent.exp
        * gdb.arch/i386-gnu-cfi.exp
        * gdb.base/disasm-end-cu.exp
        * gdb.base/macscp.exp
        * gdb.base/pending.exp
        * gdb.base/watch_thread_num.exp
        * gdb.cp/exception.exp
        * gdb.cp/gdb2495.exp
        * gdb.cp/local.exp
        * gdb.python/py-evsignal.exp
        * gdb.python/python.exp
        * gdb.trace/tracecmd.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout the files.

        * gdb.base/charset.exp
        * gdb.base/eval.exp
        * gdb.base/multi-forks.exp
        * gdb.guile/scm-progspace.exp
        * gdb.opencl/datatypes.exp
        * gdb.python/py-block.exp
        * gdb.python/py-function.exp
        * gdb.python/py-symbol.exp
        * gdb.python/py-symtab.exp
        * gdb.python/py-xmethods.exp
        * gdb.reverse/break-precsave.exp
        * gdb.reverse/break-reverse.exp
        * gdb.reverse/consecutive-precsave.exp
        * gdb.reverse/consecutive-reverse.exp
        * gdb.reverse/finish-precsave.exp
        * gdb.reverse/finish-reverse-bkpt.exp
        * gdb.reverse/finish-reverse.exp
        * gdb.reverse/fstatat-reverse.exp
        * gdb.reverse/getresuid-reverse.exp
        * gdb.reverse/i386-precsave.exp
        * gdb.reverse/i386-reverse.exp
        * gdb.reverse/i386-sse-reverse.exp
        * gdb.reverse/i387-stack-reverse.exp
        * gdb.reverse/insn-reverse.exp
        * gdb.reverse/machinestate-precsave.exp
        * gdb.reverse/machinestate.exp
        * gdb.reverse/next-reverse-bkpt-over-sr.exp
        * gdb.reverse/pipe-reverse.exp
        * gdb.reverse/readv-reverse.exp
        * gdb.reverse/recvmsg-reverse.exp
        * gdb.reverse/rerun-prec.exp
        * gdb.reverse/s390-mvcle.exp
        * gdb.reverse/sigall-precsave.exp
        * gdb.reverse/sigall-reverse.exp
        * gdb.reverse/solib-precsave.exp
        * gdb.reverse/solib-reverse.exp
        * gdb.reverse/step-precsave.exp
        * gdb.reverse/step-reverse.exp
        * gdb.reverse/time-reverse.exp
        * gdb.reverse/until-precsave.exp
        * gdb.reverse/until-reverse.exp
        * gdb.reverse/waitpid-reverse.exp
        * gdb.reverse/watch-precsave.exp
        * gdb.reverse/watch-reverse.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout the files.

        * gdb.arch/i386-mpx-simple_segv.exp
        * gdb.arch/i386-mpx.exp
        * gdb.arch/i386-permbkpt.exp
        * gdb.arch/pa-nullify.exp
        * gdb.arch/powerpc-d128-regs.exp
        * gdb.arch/vsx-regs.exp
        * gdb.base/bfp-test.exp
        * gdb.base/break.exp
        * gdb.base/breakpoint-shadow.exp
        * gdb.base/callfuncs.exp
        * gdb.base/charset.exp
        * gdb.base/commands.exp
        * gdb.base/completion.exp
        * gdb.base/dfp-test.exp
        * gdb.base/echo.exp
        * gdb.base/ending-run.exp
        * gdb.base/eval.exp
        * gdb.base/expand-psymtabs.exp
        * gdb.base/float128.exp
        * gdb.base/floatn.exp
        * gdb.base/foll-exec-mode.exp
        * gdb.base/gdb1056.exp
        * gdb.base/gdb11531.exp
        * gdb.base/kill-after-signal.exp
        * gdb.base/multi-forks.exp
        * gdb.base/overlays.exp
        * gdb.base/pending.exp
        * gdb.base/sepdebug.exp
        * gdb.base/testenv.exp
        * gdb.base/valgrind-db-attach.exp
        * gdb.base/watch_thread_num.exp
        * gdb.base/watchpoint-cond-gone.exp
        * gdb.base/watchpoint.exp
        * gdb.base/watchpoints.exp
        * gdb.cp/arg-reference.exp
        * gdb.cp/baseenum.exp
        * gdb.cp/operator.exp
        * gdb.cp/shadow.exp
        * gdb.dwarf2/dw2-op-out-param.exp
        * gdb.dwarf2/dw2-reg-undefined.exp
        * gdb.go/chan.exp
        * gdb.go/hello.exp
        * gdb.go/integers.exp
        * gdb.go/methods.exp
        * gdb.go/package.exp
        * gdb.guile/scm-parameter.exp
        * gdb.guile/scm-progspace.exp
        * gdb.guile/scm-value.exp
        * gdb.mi/mi-pending.exp
        * gdb.mi/user-selected-context-sync.exp
        * gdb.multi/multi-attach.exp
        * gdb.multi/tids.exp
        * gdb.opt/clobbered-registers-O2.exp
        * gdb.pascal/floats.exp
        * gdb.pascal/integers.exp
        * gdb.python/py-block.exp
        * gdb.python/py-events.exp
        * gdb.python/py-parameter.exp
        * gdb.python/py-symbol.exp
        * gdb.python/py-symtab.exp
        * gdb.python/py-type.exp
        * gdb.python/py-value.exp
        * gdb.python/py-xmethods.exp
        * gdb.python/python.exp
        * gdb.reverse/break-precsave.exp
        * gdb.reverse/consecutive-precsave.exp
        * gdb.reverse/finish-precsave.exp
        * gdb.reverse/i386-precsave.exp
        * gdb.reverse/machinestate-precsave.exp
        * gdb.reverse/sigall-precsave.exp
        * gdb.reverse/solib-precsave.exp
        * gdb.reverse/step-precsave.exp
        * gdb.reverse/until-precsave.exp
        * gdb.reverse/watch-precsave.exp
        * gdb.server/ext-attach.exp
        * gdb.server/ext-restart.exp
        * gdb.server/ext-run.exp
        * gdb.server/ext-wrapper.exp
        * gdb.stabs/gdb11479.exp
        * gdb.stabs/weird.exp
        * gdb.threads/attach-many-short-lived-threads.exp
        * gdb.threads/kill.exp
        * gdb.threads/watchpoint-fork.exp

2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

        Fix test names starting with uppercase throughout all the files below.

        * gdb.ada/array_return.exp
        * gdb.ada/catch_ex.exp
        * gdb.ada/info_exc.exp
        * gdb.ada/mi_catch_ex.exp
        * gdb.ada/mi_dyn_arr.exp
        * gdb.ada/mi_ex_cond.exp
        * gdb.ada/mi_exc_info.exp
        * gdb.ada/mi_interface.exp
        * gdb.ada/mi_task_arg.exp
        * gdb.ada/mi_task_info.exp
        * gdb.ada/mi_var_array.exp
        * gdb.arch/alpha-step.exp
        * gdb.arch/amd64-disp-step.exp
        * gdb.arch/arm-disp-step.exp
        * gdb.arch/disp-step-insn-reloc.exp
        * gdb.arch/e500-prologue.exp
        * gdb.arch/ftrace-insn-reloc.exp
        * gdb.arch/gdb1558.exp
        * gdb.arch/i386-bp_permanent.exp
        * gdb.arch/i386-disp-step.exp
        * gdb.arch/i386-float.exp
        * gdb.arch/i386-gnu-cfi.exp
        * gdb.arch/ia64-breakpoint-shadow.exp
        * gdb.arch/mips16-thunks.exp
        * gdb.arch/pa-nullify.exp
        * gdb.arch/powerpc-aix-prologue.exp
        * gdb.arch/powerpc-power.exp
        * gdb.arch/ppc-dfp.exp
        * gdb.arch/s390-tdbregs.exp
        * gdb.arch/spu-info.exp
        * gdb.arch/spu-ls.exp
        * gdb.arch/thumb-bx-pc.exp
        * gdb.base/advance.exp
        * gdb.base/annota-input-while-running.exp
        * gdb.base/arrayidx.exp
        * gdb.base/asmlabel.exp
        * gdb.base/async.exp
        * gdb.base/attach-wait-input.exp
        * gdb.base/auto-connect-native-target.exp
        * gdb.base/batch-preserve-term-settings.exp
        * gdb.base/bfp-test.exp
        * gdb.base/bigcore.exp
        * gdb.base/bp-permanent.exp
        * gdb.base/break-always.exp
        * gdb.base/break-fun-addr.exp
        * gdb.base/break-idempotent.exp
        * gdb.base/break-main-file-remove-fail.exp
        * gdb.base/break-probes.exp
        * gdb.base/break-unload-file.exp
        * gdb.base/break.exp
        * gdb.base/call-ar-st.exp
        * gdb.base/call-rt-st.exp
        * gdb.base/call-sc.exp
        * gdb.base/call-signal-resume.exp
        * gdb.base/call-strs.exp
        * gdb.base/callexit.exp
        * gdb.base/callfuncs.exp
        * gdb.base/catch-gdb-caused-signals.exp
        * gdb.base/catch-signal-siginfo-cond.exp
        * gdb.base/catch-syscall.exp
        * gdb.base/compare-sections.exp
        * gdb.base/cond-eval-mode.exp
        * gdb.base/condbreak-call-false.exp
        * gdb.base/consecutive-step-over.exp
        * gdb.base/cursal.exp
        * gdb.base/disabled-location.exp
        * gdb.base/disasm-end-cu.exp
        * gdb.base/display.exp
        * gdb.base/double-prompt-target-event-error.exp
        * gdb.base/dprintf-bp-same-addr.exp
        * gdb.base/dprintf-detach.exp
        * gdb.base/dprintf-next.exp
        * gdb.base/dprintf-non-stop.exp
        * gdb.base/dprintf-pending.exp
        * gdb.base/dso2dso.exp
        * gdb.base/ending-run.exp
        * gdb.base/enum_cond.exp
        * gdb.base/examine-backward.exp
        * gdb.base/exe-lock.exp
        * gdb.base/exec-invalid-sysroot.exp
        * gdb.base/execl-update-breakpoints.exp
        * gdb.base/execution-termios.exp
        * gdb.base/fileio.exp
        * gdb.base/fixsection.exp
        * gdb.base/foll-exec-mode.exp
        * gdb.base/foll-exec.exp
        * gdb.base/fork-running-state.exp
        * gdb.base/frame-args.exp
        * gdb.base/fullpath-expand.exp
        * gdb.base/func-ptr.exp
        * gdb.base/gcore-relro-pie.exp
        * gdb.base/gdb1090.exp
        * gdb.base/gdb1555.exp
        * gdb.base/global-var-nested-by-dso.exp
        * gdb.base/gnu-ifunc.exp
        * gdb.base/hbreak-in-shr-unsupported.exp
        * gdb.base/hbreak-unmapped.exp
        * gdb.base/hook-stop.exp
        * gdb.base/infcall-input.exp
        * gdb.base/info-fun.exp
        * gdb.base/info-shared.exp
        * gdb.base/interrupt-noterm.exp
        * gdb.base/jit-so.exp
        * gdb.base/jit.exp
        * gdb.base/line-symtabs.exp
        * gdb.base/list.exp
        * gdb.base/longjmp.exp
        * gdb.base/macscp.exp
        * gdb.base/max-value-size.exp
        * gdb.base/nodebug.exp
        * gdb.base/nofield.exp
        * gdb.base/overlays.exp
        * gdb.base/paginate-after-ctrl-c-running.exp
        * gdb.base/paginate-bg-execution.exp
        * gdb.base/paginate-inferior-exit.exp
        * gdb.base/pending.exp
        * gdb.base/pr11022.exp
        * gdb.base/printcmds.exp
        * gdb.base/ptr-typedef.exp
        * gdb.base/ptype.exp
        * gdb.base/randomize.exp
        * gdb.base/range-stepping.exp
        * gdb.base/realname-expand.exp
        * gdb.base/relativedebug.exp
        * gdb.base/remote.exp
        * gdb.base/savedregs.exp
        * gdb.base/sepdebug.exp
        * gdb.base/set-noassign.exp
        * gdb.base/shlib-call.exp
        * gdb.base/shreloc.exp
        * gdb.base/sigaltstack.exp
        * gdb.base/sigbpt.exp
        * gdb.base/siginfo-addr.exp
        * gdb.base/siginfo-obj.exp
        * gdb.base/siginfo-thread.exp
        * gdb.base/signest.exp
        * gdb.base/signull.exp
        * gdb.base/sigrepeat.exp
        * gdb.base/skip.exp
        * gdb.base/so-impl-ld.exp
        * gdb.base/solib-corrupted.exp
        * gdb.base/solib-disc.exp
        * gdb.base/solib-display.exp
        * gdb.base/solib-overlap.exp
        * gdb.base/solib-search.exp
        * gdb.base/solib-symbol.exp
        * gdb.base/source-execution.exp
        * gdb.base/sss-bp-on-user-bp-2.exp
        * gdb.base/sss-bp-on-user-bp.exp
        * gdb.base/stack-checking.exp
        * gdb.base/stale-infcall.exp
        * gdb.base/step-break.exp
        * gdb.base/step-line.exp
        * gdb.base/step-over-exit.exp
        * gdb.base/step-test.exp
        * gdb.base/structs.exp
        * gdb.base/sym-file.exp
        * gdb.base/symtab-search-order.exp
        * gdb.base/term.exp
        * gdb.base/type-opaque.exp
        * gdb.base/unload.exp
        * gdb.base/until-nodebug.exp
        * gdb.base/until.exp
        * gdb.base/unwindonsignal.exp
        * gdb.base/watch-cond.exp
        * gdb.base/watch-non-mem.exp
        * gdb.base/watch_thread_num.exp
        * gdb.base/watchpoint-reuse-slot.exp
        * gdb.base/watchpoint-solib.exp
        * gdb.base/watchpoint.exp
        * gdb.btrace/dlopen.exp
        * gdb.cell/arch.exp
        * gdb.cell/break.exp
        * gdb.cell/bt.exp
        * gdb.cell/core.exp
        * gdb.cell/data.exp
        * gdb.cell/dwarfaddr.exp
        * gdb.cell/ea-cache.exp
        * gdb.cell/ea-standalone.exp
        * gdb.cell/ea-test.exp
        * gdb.cell/f-regs.exp
        * gdb.cell/fork.exp
        * gdb.cell/gcore.exp
        * gdb.cell/mem-access.exp
        * gdb.cell/ptype.exp
        * gdb.cell/registers.exp
        * gdb.cell/sizeof.exp
        * gdb.cell/solib-symbol.exp
        * gdb.cell/solib.exp
        * gdb.compile/compile-tls.exp
        * gdb.cp/exception.exp
        * gdb.cp/gdb2495.exp
        * gdb.cp/local.exp
        * gdb.cp/mb-inline.exp
        * gdb.cp/mb-templates.exp
        * gdb.cp/pr10687.exp
        * gdb.cp/pr9167.exp
        * gdb.cp/scope-err.exp
        * gdb.cp/templates.exp
        * gdb.cp/virtfunc.exp
        * gdb.dwarf2/dw2-dir-file-name.exp
        * gdb.dwarf2/dw2-single-line-discriminators.exp
        * gdb.fortran/complex.exp
        * gdb.fortran/library-module.exp
        * gdb.guile/guile.exp
        * gdb.guile/scm-cmd.exp
        * gdb.guile/scm-frame-inline.exp
        * gdb.guile/scm-objfile.exp
        * gdb.guile/scm-pretty-print.exp
        * gdb.guile/scm-symbol.exp
        * gdb.guile/scm-type.exp
        * gdb.guile/scm-value.exp
        * gdb.linespec/keywords.exp
        * gdb.linespec/ls-errs.exp
        * gdb.linespec/macro-relative.exp
        * gdb.linespec/thread.exp
        * gdb.mi/mi-breakpoint-changed.exp
        * gdb.mi/mi-dprintf-pending.exp
        * gdb.mi/mi-fullname-deleted.exp
        * gdb.mi/mi-logging.exp
        * gdb.mi/mi-pending.exp
        * gdb.mi/mi-solib.exp
        * gdb.mi/new-ui-mi-sync.exp
        * gdb.mi/user-selected-context-sync.exp
        * gdb.multi/dummy-frame-restore.exp
        * gdb.multi/multi-arch-exec.exp
        * gdb.multi/remove-inferiors.exp
        * gdb.multi/watchpoint-multi-exit.exp
        * gdb.opt/solib-intra-step.exp
        * gdb.perf/backtrace.exp
        * gdb.perf/single-step.exp
        * gdb.perf/skip-command.exp
        * gdb.perf/skip-prologue.exp
        * gdb.perf/solib.exp
        * gdb.python/lib-types.exp
        * gdb.python/py-as-string.exp
        * gdb.python/py-bad-printers.exp
        * gdb.python/py-block.exp
        * gdb.python/py-breakpoint.exp
        * gdb.python/py-cmd.exp
        * gdb.python/py-events.exp
        * gdb.python/py-evthreads.exp
        * gdb.python/py-finish-breakpoint.exp
        * gdb.python/py-finish-breakpoint2.exp
        * gdb.python/py-frame-inline.exp
        * gdb.python/py-frame.exp
        * gdb.python/py-inferior.exp
        * gdb.python/py-infthread.exp
        * gdb.python/py-mi.exp
        * gdb.python/py-objfile.exp
        * gdb.python/py-pp-maint.exp
        * gdb.python/py-pp-registration.exp
        * gdb.python/py-prettyprint.exp
        * gdb.python/py-recurse-unwind.exp
        * gdb.python/py-shared.exp
        * gdb.python/py-symbol.exp
        * gdb.python/py-symtab.exp
        * gdb.python/py-template.exp
        * gdb.python/py-type.exp
        * gdb.python/py-unwind-maint.exp
        * gdb.python/py-unwind.exp
        * gdb.python/py-value.exp
        * gdb.python/python.exp
        * gdb.reverse/finish-reverse-bkpt.exp
        * gdb.reverse/insn-reverse.exp
        * gdb.reverse/next-reverse-bkpt-over-sr.exp
        * gdb.reverse/solib-precsave.exp
        * gdb.reverse/solib-reverse.exp
        * gdb.stabs/gdb11479.exp
        * gdb.stabs/weird.exp
        * gdb.threads/fork-child-threads.exp
        * gdb.threads/fork-plus-threads.exp
        * gdb.threads/fork-thread-pending.exp
        * gdb.threads/forking-threads-plus-breakpoint.exp
        * gdb.threads/hand-call-in-threads.exp
        * gdb.threads/interrupted-hand-call.exp
        * gdb.threads/linux-dp.exp
        * gdb.threads/local-watch-wrong-thread.exp
        * gdb.threads/next-while-other-thread-longjmps.exp
        * gdb.threads/non-ldr-exit.exp
        * gdb.threads/pending-step.exp
        * gdb.threads/print-threads.exp
        * gdb.threads/process-dies-while-detaching.exp
        * gdb.threads/process-dies-while-handling-bp.exp
        * gdb.threads/pthreads.exp
        * gdb.threads/queue-signal.exp
        * gdb.threads/reconnect-signal.exp
        * gdb.threads/signal-command-handle-nopass.exp
        * gdb.threads/signal-command-multiple-signals-pending.exp
        * gdb.threads/signal-delivered-right-thread.exp
        * gdb.threads/signal-sigtrap.exp
        * gdb.threads/sigthread.exp
        * gdb.threads/staticthreads.exp
        * gdb.threads/stepi-random-signal.exp
        * gdb.threads/thread-unwindonsignal.exp
        * gdb.threads/thread_check.exp
        * gdb.threads/thread_events.exp
        * gdb.threads/tid-reuse.exp
        * gdb.threads/tls-nodebug.exp
        * gdb.threads/tls-shared.exp
        * gdb.threads/tls-so_extern.exp
        * gdb.threads/tls.exp
        * gdb.threads/wp-replication.exp
        * gdb.trace/actions-changed.exp
        * gdb.trace/actions.exp
        * gdb.trace/backtrace.exp
        * gdb.trace/change-loc.exp
        * gdb.trace/collection.exp
        * gdb.trace/deltrace.exp
        * gdb.trace/disconnected-tracing.exp
        * gdb.trace/entry-values.exp
        * gdb.trace/ftrace-lock.exp
        * gdb.trace/ftrace.exp
        * gdb.trace/infotrace.exp
        * gdb.trace/mi-trace-frame-collected.exp
        * gdb.trace/mi-trace-unavailable.exp
        * gdb.trace/mi-traceframe-changed.exp
        * gdb.trace/mi-tracepoint-changed.exp
        * gdb.trace/mi-tsv-changed.exp
        * gdb.trace/no-attach-trace.exp
        * gdb.trace/packetlen.exp
        * gdb.trace/passc-dyn.exp
        * gdb.trace/passcount.exp
        * gdb.trace/pending.exp
        * gdb.trace/pr16508.exp
        * gdb.trace/qtro.exp
        * gdb.trace/range-stepping.exp
        * gdb.trace/read-memory.exp
        * gdb.trace/report.exp
        * gdb.trace/save-trace.exp
        * gdb.trace/signal.exp
        * gdb.trace/stap-trace.exp
        * gdb.trace/status-stop.exp
        * gdb.trace/strace.exp
        * gdb.trace/tfile.exp
        * gdb.trace/tfind.exp
        * gdb.trace/trace-break.exp
        * gdb.trace/trace-condition.exp
        * gdb.trace/trace-enable-disable.exp
        * gdb.trace/trace-mt.exp
        * gdb.trace/tracecmd.exp
        * gdb.trace/tracefile-pseudo-reg.exp
        * gdb.trace/tspeed.exp
        * gdb.trace/tstatus.exp
        * gdb.trace/tsv.exp
        * gdb.trace/unavailable.exp
        * gdb.trace/while-dyn.exp
        * gdb.trace/while-stepping.exp
        * lib/gdb-guile.exp
        * lib/gdb.exp
        * lib/mi-support.exp
        * lib/pascal.exp
        * lib/perftest.exp
        * lib/prelink-support.exp
        * lib/selftest-support.exp

2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in: Include disable-implicit-rules.mk.

2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/nonvar-access.exp: Add a test for accessing
        non-byte-aligned bit fields.

2016-11-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        PR gdb/12616
        * gdb.dwarf2/nonvar-access.exp: New testcase.  Check that GDB
        respects the DW_AT_data_bit_offset attribute.

2016-11-22  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/default.exp: Fix output of "set language".

2016-11-17  Simon Marchi  <simon.marchi@polymtl.ca>

        * Makefile.in: Remove @GMAKE_TRUE@ prefixes and removes lines
        prefixed with @GMAKE_FALSE@.  Update comment related to non-GNU
        make.
        * configure.ac: Remove checks for the make program.
        * configure: Re-generate.

2016-11-16  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-recurse-unwind.c (main): Add loop.
        * gdb.python/py-recurse-unwind.py (TestUnwinder): Add calls
        to read_register() and gdb.parse_and_eval().  Make each code
        call a separate case that can be individually tested.
        * gdb.python/py-recurse-unwind.exp (cont_and_backtrace): New
        proc. Call cont_and_backtrace for each of the code paths that
        we want to test in the unwinder.

2016-11-15  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/bitfield-parent-optimized-out.exp: Fix DWARF code for
        the definition of struct S.

2016-11-11  Catherine Moore  <clm@codesourcery.com>

        * gdb.base/dump.exp: Identify verilog format dump tests as such.

2016-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/commands.exp (runto_or_return): New procedure.
        (gdbvar_simple_if_test, gdbvar_simple_while_test)
        (gdbvar_complex_if_while_test, progvar_simple_if_test)
        (progvar_simple_while_test, progvar_complex_if_while_test)
        (if_while_breakpoint_command_test)
        (infrun_breakpoint_command_test, breakpoint_command_test)
        (user_defined_command_test, watchpoint_command_test)
        (test_command_prompt_position, redefine_hook_test)
        (stray_arg0_test, error_clears_commands_left, redefine_hook_test)
        (redefine_backtrace_test): Use runto_or_return, $valnum_re,
        multi_line_input and multi_line.  Remove gdb_expect and
        gdb_stop_suppressing_tests uses.
        * lib/gdb.exp (valnum_re): New global.
        (multi_line_input): New procedure.

2016-11-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/user-selected-context-sync.exp (with_test_prefix_procname):
        Remove.
        (test_setup): Define with proc_with_prefix.
        (test_cli_inferior): Likewise.
        (test_cli_thread): Likewise.
        (test_cli_frame): Likewise.
        (test_cli_select_frame): Likewise.
        (test_cli_up_down): Likewise.
        (test_mi_thread_select): Likewise.
        (test_mi_stack_select_frame): Likewise.
        (test_cli_in_mi_inferior): Likewise.
        (test_cli_in_mi_thread): Likewise.
        (test_cli_in_mi_frame): Likewise.
        (top level): Do not use with_test_prefix_procname.

2016-11-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/commands.exp (gdbvar_simple_if_test)
        (gdbvar_simple_while_test, gdbvar_complex_if_while_test)
        (progvar_simple_if_test, progvar_simple_while_test)
        (progvar_complex_if_while_test, if_while_breakpoint_command_test)
        (infrun_breakpoint_command_test, breakpoint_command_test)
        (user_defined_command_test, watchpoint_command_test)
        (test_command_prompt_position, deprecated_command_test)
        (bp_deleted_in_command, temporary_breakpoint_commands)
        (stray_arg0_test, source_file_with_indented_comment)
        (recursive_source_test, if_commands_test)
        (error_clears_commands_left, redefine_hook_test)
        (redefine_backtrace_test): Use proc_with_prefix.
        * lib/gdb.exp (proc_with_prefix): New proc.

2016-11-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/tui-layout.c: New file.
        * gdb.base/tui-layout.exp: Use tui-layout.c, to ensure that the
        disassembly window contains very long lines.

2016-11-08  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-value.exp (test_value_creation): Make "long" test
        depend on Python 2.

2016-11-08  Tom Tromey  <tom@tromey.com>

        * gdb.python/py-framefilter.py (ElidingFrameDecorator.address):
        New method.

2016-10-29  Manish Goregaokar  <manish@mozilla.com>

        * gdb.rust/simple.exp: Add tests for `sizeof(expr)`.

2016-10-27  Manish Goregaokar  <manish@mozilla.com>

        * gdb.rust/simple.rs: Add test for univariant enums without
        discriminants and for encoded struct-like enums.

2016-10-28  Pedro Alves  <palves@redhat.com>

        * gdb.base/maint.exp <maint info line-table w/o a file name>: Use
        gdb_test_multiple, tighten regexps and match symtabs and line
        tables incrementally.

2016-10-28  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/foll-exec.exp (do_exec_tests): Make test pattern more
        general.

2016-10-25  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/exec-invalid-sysroot.exp: New file.

2016-10-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/morestack.exp: Try to build it using -fuse-ld=gold first.

2016-10-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * lib/gdb.exp (get_compiler_info): Generalize gcc_compile regexp.

2016-10-19  Maciej W. Rozycki  <macro@imgtec.com>

        * gdb.base/killed-outside.exp: Remove $options from a call to
        `prepare_for_testing'.

2016-10-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/mi-trace-save.exp (test_trace_save_wrong_num_args):
        Change test message.

2016-10-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/mi-trace-save.exp (test_trace_save_wrong_num_args):
        Update comment.

2016-10-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/mi-trace-save.exp: New file.

2016-10-13  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/code_elim.exp (get_var_address): Remove.
        * gdb.base/relocate.exp: Likewise.
        * gdb.base/shreloc.exp: Likewise.
        * lib/gdb.exp (get_var_address): New.

2016-10-13  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/structs.exp: Invoke gdb_skip_float_test, and do
        floating point tests if $skip_float_test is false.

2016-10-12  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.python/py-value.c (main): Check if argv is NULL before using it.
        * gdb.python/py-value.exp (test_value_in_inferior): Don't use hardcoded
        argc values.
        Add 1 to argc so we guarantee distinct initial/modified argc values.

2016-10-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/powerpc-prologue.c (optimized_1): New declaration.

2016-10-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/powerpc-prologue.exp: Use standard_output_file
        * gdb.arch/ppc64-symtab-cordic.exp: Likewise.
        * gdb.arch/vsx-regs.exp: Likewise.

2016-10-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.xml/tdesc-regs.exp: Set regdir to "arm/".

2016-10-07  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.python/python.exp: Test decode_line("*0").

2016-10-06  Doug Evans  <dje@google.com>

        * gdb.python/py-value.exp (test_value_creation): Add test for large
        unsigned 64-bit value.

2016-10-06  Tom Tromey  <tom@tromey.com>

        * gdb.compile/compile.exp: Change java tests to rust.
        * gdb.base/setshow.exp: Change java tests to rust.
        * gdb.base/default.exp: Remove java from language list.
        * README (Examples): Update language example.
        * gdb.python/py-lookup-type.exp (test_lookup_type): Remove java
        test.
        * lib/gdb.exp (skip_java_tests): Remove.
        * lib/java.exp: Remove.
        * gdb.java: Remove.

2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>

        * gdb.arch/mips-fcr.exp: New test.
        * gdb.arch/mips-fcr.c: Source for the new test.

2016-10-06  Maciej W. Rozycki  <macro@imgtec.com>

        * gdb.base/solib-disc.exp: Use `standard_output_file'
        throughout.

2016-10-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/jit-simple-dl.c: New file.
        * gdb.base/jit-simple-jit.c: New file, factored out from ...
        * gdb.base/jit-simple.c: ... this.
        * gdb.base/jit-simple.exp (jit_run): Delete.
        (build_jit): New proc.
        (jit_test_reread): Recompile either the main program or the shared
        library, depending on what is being tested.  Skip changing address
        if caller wants to.  Compare before/after addresses.  If testing
        standalone, explicitly load the binary.  Test "maint info
        breakpoints".
        (top level): Add "standalone vs shared lib" and "change address"
        vs "same address" axes.

2016-10-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/jit-simple.exp (top level) Delete get_compiler_info
        call.
        (jit_run): Delete.
        (jit_test_reread): Use with_test_prefix.  Reload the main binary
        explicitly.  Compare the before/after addresses of the JIT
        descriptor.

2016-08-15  Doug Evans  <dje@google.com>

        * gdb.xml/extra-regs.xml: Update, end field now required, default type
        for single bitfields is bool.
        * gdb.xml/tdesc-regs.exp: Ditto.

2016-10-05  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/i386-signal.exp (backtrace 10): Fix #2 typo.

2016-10-05  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (support_complex_tests): Return zero if
        gdb_skip_float_test return true.

2016-10-03  Antoine Tremblay  <antoine.tremblay@ericsson.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20487
        * gdb.mi/user-selected-context-sync.exp: New file.
        * gdb.mi/user-selected-context-sync.c: New file.

2016-10-03  Antoine Tremblay  <antoine.tremblay@ericsson.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20487
        * gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt
        =thread-select-event check.

2016-09-29  Peter Bergner  <bergner@vnet.ibm.com>

        * gdb.arch/powerpc-power.exp <cmprb>: Update tests to account for
        the compulsory L operand changes.
        * gdb.arch/powerpc-power.s: Likewise.

2016-09-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression
        * gdb.base/jit-attach-pie.c: New file.
        * gdb.base/jit-attach-pie.exp: New file.

2016-09-28  Pedro Alves  <palves@redhat.com>

        * gdb.base/infcall-input.c: New file.
        * gdb.base/infcall-input.exp: New file.

2016-09-22  Yao Qi  <yao.qi@linaro.org>

        * lib/gdbserver-support.exp: Rename mi_gdb_exit.
        (gdb_exit): Rename it to ...
        (gdbserver_gdb_exit): ...  Close GDBserver.
        (gdb_exit): New proc, call gdbserver_gdb_exit.
        (mi_gdb_exit): Likewise.

2016-09-22  Yao Qi  <yao.qi@linaro.org>

        * boards/gdbserver-base.exp (gdb_server_prog): Set the absolute
        path.
        * boards/remote-gdbserver-on-localhost.exp: Use gdbserver-base.
        Remove duplication.

2016-09-22  Yao Qi  <yao.qi@linaro.org>

        * lib/gdbserver-support.exp: Check the existence of
        gdbserver_orig_gdb_exit rather than gdbserver_gdb_exit.

2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>

        * gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.

2016-09-21  Tom Tromey  <tom@tromey.com>

        PR gdb/20604:
        * gdb.base/quit.exp: New file.

2016-09-21  Simon Marchi  <simon.marchi@ericsson.com>

        * .gitignore: New file.

2016-09-21  Maciej W. Rozycki  <macro@imgtec.com>

        * gdb.arch/mips16-thunks.exp: Use `standard_output_file'
        throughout.

2016-09-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/gdb.exp: No longer skip hardware breakpoint tests on s390.

2016-09-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.cp/casts.cc (decltype): Move it ...
        (main): ... with its call to ...
        * gdb.cp/casts03.cc: ... a new file.
        * gdb.cp/casts.exp: Add new file casts03.cc, move decltype test to it.

2016-09-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.cp/m-static.h (gnu_obj_4::somewhere): Use constexpr for C++11.

2016-09-15  Peter Bergner  <bergner@vnet.ibm.com>

        * gdb.arch/powerpc-power.s: Update Power9 instruction tests
        and sync up the test with tests in gas/testsuite/gas/ppc.
        * gdb.arch/powerpc-power.exp: Likewise.

2016-09-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * lib/future.exp: Set CCACHE_DISABLE, clear CCACHE_NODISABLE.

2016-09-11  Sergio Durigan Junior  <sergiodj@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/stap-probe.c (m1): New variable 'dummy', necessary to
        make m1's definition to be different from m2's.  Use 'dummy' as an
        argument for probe 'two'.

2016-09-10  Jon Beniston  <jon@beniston.com>

        * lib/mi-support.exp (mi_gdb_target_load): Use target_sim_options
        for sim target.

2016-09-09  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/gnu-ifunc-lib.c (resolver_hwcap): New external
        variable declaration.
        (gnu_ifunc): Add parameter hwcap.  Store it in resolver_hwcap.
        * gdb.base/gnu-ifunc.c (resolver_hwcap): New global variable.
        * gdb.base/gnu-ifunc.exp: Add test to verify that the resolver
        received HWCAP as its argument.

2016-09-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/new-ui-pending-input.c: New file.
        * gdb.base/new-ui-pending-input.exp: New file.
        * gdb.exp (clear_gdb_spawn_id): New procedure.
        (with_spawn_id): Check whether gdb_spawn_id exists before
        referencing it.  If gdb_spawn_id didn't exist on entry, clear it
        on exit.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.base/float128.c: New file.
        * gdb.base/float128.exp: Likewise.
        * gdb.base/floatn.c: Likewise.
        * gdb.base/floatn.exp: Likewise.

2016-09-05  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.cp/hang.exp: Remove reference to TYPE_FLAG_STUB in comment.

2016-09-05  Pedro Alves  <palves@redhat.com>

        PR backtrace/19927
        * gdb.python/py-unwind-maint.exp: Adjust tests to not expect that
        unwinders are immediately called as side effect of "source" or
        "disable unwinder" commands.
        * gdb.python/py-recurse-unwind.exp: Remove setup_kfail calls.

2016-09-02  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/return-nodebug.exp: Skip the test if skip_float_test
        is true and $type is "float" or "double".

2016-09-02  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-neon.exp: Skip it if gdb_skip_float_test returns
        true.
        * gdb.base/call-ar-st.exp: Invoke gdb_skip_float_test.
        * gdb.base/call-rt-st.exp: Likewise.
        * gdb.base/call-sc.exp: Invoke gdb_skip_float_test and use its
        return value instead of gdb,skip_float_test.
        * gdb.base/callfuncs.exp: Invoke gdb_skip_float_test.
        (do_function_calls): Use its return value instead of
        gdb,skip_float_test.
        * gdb.base/finish.exp: Likewise.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/return.exp: Likewise.
        * gdb.base/return2.exp: Likewise.
        * gdb.base/varargs.exp: Likewise.
        * lib/gdb.exp (gdb_skip_float_test): Change it to
        gdb_caching_proc.  Detect the broken ptrace on arm-linux.

2016-08-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.multi/tids.exp: Test "thread apply all".

2016-08-29  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/default.exp (tty): Remove.

2016-08-24  Kevin Buettner  <kevinb@redhat.com>

        * gdb.python/py-recurse-unwind.c: New file.
        * gdb.python/py-recurse-unwind.py: New file.
        * gdb.python/py-recurse-unwind.exp: New file.

2016-08-24  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/set-inferior-tty.exp: New file.
        * gdb.base/set-inferior-tty.c: New file.

2016-08-23  Pedro Alves  <palves@redhat.com>

        PR gdb/20494
        * gdb.base/new-ui-echo.c: New file.
        * gdb.base/new-ui-echo.exp: New file.

2016-08-23  Yao Qi  <yao.qi@linaro.org>

        * gdb.server/connect-stopped-target.exp (do_test): Pass "" to
        gdbserver_spawn.
        * gdb.server/connect-without-multi-process.exp (do_test):
        Likewise.

2016-08-23  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/signals-state-child.exp: Set variables gdb_txt and
        standalone_txt.  Delete gdb_txt and standalone_txt on host
        and target.  Spawn the binary on target.  Copy files from
        target to host.

2016-08-22  Pedro Alves  <palves@redhat.com>

        PR gdb/20505
        * gdb.base/vdso-warning.exp: Test core dumps too.  Use
        with_test_prefix.  Factor out bits to ...
        (test_no_vdso): ... this new procedure.

2016-08-19  Carl Love  <cel@us.ibm.com>

        * gdb.arch/altivec-regs.exp: Use standard_testfile instead of
        maintaining separate logic for constructing the output path.
        * gdb.arch/powerpc-d128-regs.exp: Likewise.
        * gdb.arch/ppc-dfp.exp: Likewise.
        * gdb.arch/ppc-fp.exp: Likewise.
        * gdb.arch/vsx-regs.exp: Likewise.
        * gdb.arch/altivec-abi.exp: Likewise, plus added local variable
        binprefix for generating the additional binary files.

2016-08-19  Pedro Alves  <palves@redhat.com>

        * gdb.trace/mi-trace-frame-collected.exp
        (test_trace_frame_collected): On x32, expect two registers.

2016-08-18  Carl Love  <cel@us.ibm.com>

        * gdb.arch/powerpc-power.s: Add new Power9 instruction tests
        and sync up the test with tests in gas/testsuite/gas/ppc.
        * gdb.arch/powerpc-power.exp: Likewise.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.multi/remove-inferiors.exp (test_remove_inferiors): Fix
        expected error message.

2016-08-17  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.multi/remove-inferiors.exp: New file.
        * gdb.multi/remove-inferiors.c: New file.

2016-08-12  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/signals-state-child.c (main): Remove "i" from fprintf's
        argument list.

2016-08-10  Pedro Alves  <palves@redhat.com>

        PR gdb/19187
        * gdb.reverse/waitpid-reverse.exp: Add comment and remove
        setup_kfails.

2016-08-09  Pedro Alves  <palves@redhat.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/20418
        * gdb.mi/new-ui-mi-sync.c, gdb.mi/new-ui-mi-sync.exp: New files.
        * lib/mi-support.exp (mi_expect_interrupt): Remove anchors.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR mi/20431
        * gdb.mi/mi-cmd-error.exp: New file.

2016-08-09  Pedro Alves  <palves@redhat.com>

        PR gdb/18653
        * gdb.base/signals-state-child.c: New file.
        * gdb.base/signals-state-child.exp: New file.
        * gdb.gdb/selftest.exp (do_steps_and_nexts): Add new pattern.

2016-08-09  Pedro Alves  <palves@redhat.com>

        * gdb.dwarf2/bitfield-parent-optimized-out.exp: New file.

2016-08-03  Tom Tromey  <tom@tromey.com>

        PR python/18565:
        * gdb.python/py-frame-inline.exp: Add Frame.function test.

2016-08-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.threads/process-dies-while-detaching.exp (do_test): Set
        variable mode to "multi-process" if $multi_process is 1, otherwise
        set it to "single-process".

2016-08-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.cp/anon-struct.exp: Check is_aarch32_target.
        * gdb.cp/cpexprs.exp: Likewise.
        * gdb.cp/m-static.exp: Likewise.

2016-07-26  Tom Tromey  <tom@tromey.com>

        PR python/20190:
        * gdb.threads/tls.exp (check_thread_local): Add python symbol
        test.

2016-07-26  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/record_goto.exp: se is_amd64_regs_target for
        selecting assembly source files.
        * gdb.btrace/stepi.exp: se is_amd64_regs_target for selecting
        assembly source files.
        * gdb.btrace/tailcall.exp: se is_amd64_regs_target for selecting
        assembly source files.
        * gdb.btrace/tailcall-only.exp: se is_amd64_regs_target for
        selecting assembly source files.

2016-07-25  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/new-ui.exp (do_test_invalid_args): New
        procedure.

2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>

        * gdb.btrace/reconnect.c: New file.
        * gdb.btrace/reconnect.exp: New file.

2016-07-23  Gabriel Krisman Bertazi  <gabriel@krisman.be>

        * gdb.base/catch-syscall.exp (do_syscall_tests): Add call
        to test_catch_syscall_group.
        (test_catch_syscall_group): New.

2016-07-21  Tom Tromey  <tom@tromey.com>

        * gdb.rust/simple.rs (main): Use empty struct expression.
        * gdb.rust/simple.exp: Add tests for empty struct expression.

2016-07-21  Yao Qi  <yao.qi@linaro.org>

        * lib/gdbserver-support.exp (skip_gdbserver_tests): Return 1
        if gdb_skip_xml_test is true on some targets.

2016-07-21  Yao Qi  <yao.qi@linaro.org>

        * gdb.server/solib-list.exp: Unset last_loaded_file.

2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.gdb/selftest.exp (do_steps_and_nexts): Add "next over TRY" and
        "step into captured_main (args)".

2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.btrace/tailcall-only.exp: Use is_lp64_target check.

2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.python/py-unwind.exp: Test also ![is_lp64_target].

2016-07-19  Pedro Alves  <palves@redhat.com>

        * gdb.opt/inline-break.exp: Remove optimize=-O2.
        * gdb.opt/inline-bt.exp: Likewise.
        * gdb.opt/inline-cmds.exp: Remove optimize=-O2 and add
        additional_flags=-Winline.
        * gdb.opt/inline-locals.exp: Likewise.
        * gdb.opt/inline-markers.c (ATTR): Define.
        (inlined_fn): Use it.

2016-07-19  Yao Qi  <yao.qi@linaro.org>

        * gdb.gdb/selftest.exp: Remove checks on is_remote and isnative.
        (test_with_self): Remove some code.  Remove argument executable.
        (top-level): Use do_self_tests.

2016-07-15  Zachary Welch  <zwelch@codesourcery.com>
            Don Breazeal <donb@codesourcery.com>

        * gdb.base/maint.exp: Escape paths used in regular expressions.
        * gdb.stabs/weird.exp: Likewise.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/15620, PR python/18620:
        * gdb.python/py-breakpoint.exp (connect_event, check_last_event)
        (test_bkpt_events): New procs.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR python/17698:
        * gdb.python/py-breakpoint.exp (test_bkpt_basic): Add "pending"
        test.
        (test_watchpoints): Likewise.
        (test_bkpt_pending): New proc.

2016-07-13  Tom Tromey  <tom@tromey.com>

        PR cli/18053:
        * gdb.base/jit-so.exp (one_jit_test): Add jit-reader-load
        completion test.

2016-07-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.dwarf2/atomic-type.exp: Use function_range for low_pc and high_pc.
        * gdb.dwarf2/atomic.c (f): Rename f_end_lbl to f_label.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.c (f): Rename f_end_lbl to
        f_label.
        (g): Rename g_end_lbl to g_label.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: Use function_range for
        low_pc and high_pc.
        * gdb.dwarf2/dw2-lexical-block-bare.exp: Likewise.

2016-07-12  Tom Tromey  <tom@tromey.com>

        PR python/19293:
        * gdb.python/py-unwind-maint.exp: Update tests.

2016-07-12  Yao Qi  <yao.qi@linaro.org>

        * lib/selftest-support.exp (selftest_setup): Match the output
        when captured_main is inlined.

2016-07-07  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.fortran/derived-types.exp (result_line, result_line_2):
        New variables.
        (print this%a, print this%b, print this): New tests.
        * gdb.fortran/derived-types.f90 (this): New object and
        initialization.

2016-07-06  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.ada/arraydim.exp: Remove extra directory level in build
        directory.

2016-07-06  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/ada.exp: Remove extra directory level in build directory.
        * gdb.ada/cond_lang.exp: Likewise.
        * gdb.ada/exec_changed.exp: Likewise.
        * gdb.ada/lang_switch.exp: Likewise.

2016-07-06  Manish Goregaokar  <manish@mozilla.com>

        * simple.rs: Add test for raw pointer subscripting.
        * simple.exp: Add test expectations.

2016-07-05  Yao Qi  <yao.qi@linaro.org>

        * gdb.mi/mi-reverse.exp: Match =record-started output.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * gdb.base/jit-reader.exp (info_registers_current_frame): New
        procedure.
        (jit_reader_test): Test the jit reader's unwinder.
        * gdb.base/jithost.c (jit_function_00_code): New global.
        (main): Use memcpy to fill in the mmapped code, instead of poking
        bytes manually here.
        * gdb.base/jitreader.c (enum register_mapping) <AMD64_RBP>: New
        value.
        (read_debug_info): Save the function's range.
        (read_sp): New function.
        (unwind_frame): Use it.  Also unwind RBP.
        (get_frame_id): Use read_sp.
        (gdb_init_reader): Use calloc instead of malloc.
        * lib/gdb.exp (get_hexadecimal_valueof): Add optional 'test'
        parameter.  Use gdb_test_multiple.

2016-07-01  Pedro Alves  <palves@redhat.com>
            Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.threads/process-dies-while-detaching.c: New file.
        * gdb.threads/process-dies-while-detaching.exp: New file.

2016-07-01  Pedro Alves  <palves@redhat.com>

        * gdb.multi/watchpoint-multi-exit.c: New file.
        * gdb.multi/watchpoint-multi-exit.exp: New file.

2016-06-30  Pedro Alves  <palves@redhat.com>

        * lib/gdbserver-support.exp (close_gdbserver, gdb_exit): Don't
        unset inferior_spawn_id.

2016-06-30  Pedro Alves  <palves@redhat.com>

        * lib/mi-support.exp (default_mi_gdb_start): Declare global
        FORCE_SEPARATE_MI_TTY, not SEPARATE_MI_TTY.

2016-06-29  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/return.c: Add copyright header.

2016-06-29  Tom Tromey  <tom@tromey.com>

        PR python/20129:
        * gdb.python/py-framefilter.exp: Add tests for setting priority
        and disabling of non-existent frame filter.

2016-06-29  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.c [__arm__]: Set unknown_syscall to
        0x0f07ff.

2016-06-28  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.exp: Remove check on isnative and target
        triplets.  Start gdb, execute catch syscall, and continue.  Check
        gdb's output to determine catch syscall is supported.

2016-06-27  Manish Goregaokar  <manish@mozilla.com>

        * gdb.rust/simple.rs: Add test for returning unit in a function.
        * gdb.rust/simple.exp: Add expectation for functions returning
        unit.

2016-06-27  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.python/py-breakpoint-create-fail.c,
        gdb.python/py-breakpoint-create-fail.exp,
        gdb.python/py-breakpoint-create-fail.py: New testcase.

2016-06-25  Manish Goregaokar  <manish@mozilla.com>

        PR gdb/20239
        * gdb.rust/simple.rs: Add more tests for printing NonZero enums.
        * gdb.rust/simple.exp: Add test expectations for new NonZero
        tests.

2016-06-24  David Taylor  <dtaylor@emc.com>

        * gdb.base/offsets.exp: New file.
        * gdb.base/offsets.c: New file.

2016-06-23  Tom Tromey  <tom@tromey.com>

        PR gdb/16483:
        * gdb.python/py-framefilter.exp: Add "info frame-filter" test
        before any filters are loaded.

2016-06-21  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.fortran/derived-type.exp (print q): Add fields to the output.
        * gdb.fortran/vla-type.exp (print twov): Fix vla tests with
        structs.
        * gdb.fortran/derived-type-function.exp: New file.
        * gdb.fortran/derived-type-function.f90: New file.


2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/new-ui.exp: New file.
        * lib/mi-support.exp (switch_gdb_spawn_id): Move to ...
        * lib/gdb.exp (switch_gdb_spawn_id): ... here.
        (with_spawn_id): New procedure.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-exec-run.exp: New file.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-break.exp (test_breakpoint_commands): Always expect
        breakpoint command's output on the main UI.
        (test_break): New procedure, factored out from calls in the top
        level.
        (top level): Use foreach_with_prefix to test MI as main UI and as
        separate UI.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-watch.exp (test_watchpoint_creation_and_listing)
        (test_awatch_creation_and_listing)
        (test_rwatch_creation_and_listing, test_watchpoint_triggering):
        Remove 'type' parameter.
        (test_watchpoint_all): New parameter mi_mode.  Remove
        with_test_prefix.
        (top level): Use foreach_with_prefix, and add main/separate UI MI
        testing axis.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * README (Testsuite Parameters): Document FORCE_SEPARATE_MI_TTY.
        * lib/gdb.exp (default_gdb_exit): Clear inferior_spawn_id.
        * lib/mi-support.exp (mi_uncatched_gdb_exit): Unset
        gdb_main_spawn_id, mi_spawn_id, unset inferior_spawn_id.
        (gdb_main_spawn_id, mi_spawn_id): Declare and
        comment.
        (mi_create_inferior_pty): New procedure,
        factored out from default_mi_gdb_start.
        (switch_gdb_spawn_id, mi_gdb_start_separate_mi_tty): New
        procedures.
        (default_mi_gdb_start): Call mi_gdb_start_separate_mi_tty if the
        separate-mi-tty option is specified, or SEPARATE_MI_TTY is set.
        Use mi_create_inferior_pty.
        (mi_gdb_start): Use eval to pass down args list.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.opt/inline-cmds.c: Add "set mi break here" marker.
        * gdb.opt/inline-cmds.exp: Add MI tests.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/selftest.exp (do_steps_and_nexts): Add new regexp.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.ada/mi_catch_ex.exp (continue_to_exception): New procedure.
        (top level): Use it instead of mi_execute_to.

2016-06-21  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-mi-events-gdb.py (stop_handler_str)
        (cont_handler_str): New.
        (signal_stop_handler): Set stop_handler_str instead of printing to
        stdout.
        (continue_handler): Set cont_handler_str instead of printing to
        stdout.
        * gdb.python/py-mi-events.exp: Ues mi_execute_to instead of
        mi_send_resuming_command.  Print stop_handler_str and
        cont_handler_str instead of expecting the python events print
        directly.

2016-06-17  Sanjoy Das  <sanjoy@playingwithpointers.com>

        * gdb.base/jit-reader.exp: New file.
        * gdb.base/jithost.c: New file.
        * gdb.base/jithost.h: New file.
        * gdb.base/jitreader.c : New file.
        * gdb.base/jit-protocol.h: New file.

2016-06-17  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/step-over-syscall.exp (break_cond_on_syscall): New
        parameters follow_fork and detach_on_fork.  Set follow-fork-mode
        and detach-on-fork.  Adjust tests.
        (top level): Invoke break_cond_on_syscall with combinations of
        syscall, follow-fork-mode and detach-on-fork.

2016-06-17  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/step-over-exit.c: New.
        * gdb.base/step-over-exit.exp: New.

2016-06-17  Yan-Ting Lin  <currygt52@gmail.com>

        * gdb.base/float.exp: Add target check for nds32*-*-*.
        * gdb.xml/tdesc-regs.exp: Set core-regs for nds32*-*-*.

2016-06-13  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/call-ar-st.exp: Report unsupported rather than xfail
        for unsupported target features.
        * gdb.base/call-rt-st.exp: Likewise.
        * gdb.base/call-sc.exp: Likewise.
        * gdb.base/call-signal-resume.exp: Likewise.
        * gdb.base/call-strs.exp: Likewise.
        * gdb.base/callexit.exp: Likewise.
        * gdb.base/callfuncs.exp: Likewise.
        * gdb.base/nodebug.exp: Likewise.
        * gdb.base/printcmds.exp: Likewise.
        * gdb.base/ptype.exp: Likewise.
        * gdb.base/structs.exp: Likewise.
        * gdb.base/unwindonsignal.exp: Likewise.
        * gdb.cp/gdb2495.exp: Likewise.
        * gdb.cp/templates.exp: Likewise.
        * gdb.cp/virtfunc.exp: Likewise.
        * gdb.threads/hand-call-in-threads.exp: Likewise.
        * gdb.threads/interrupted-hand-call.exp: Likewise.
        * gdb.threads/thread-unwindonsignal.exp: Likewise.

2016-06-10  Tom Tromey  <tom@tromey.com>

        PR rust/20110:
        * gdb.rust/expr.exp: Add test for integer constant larger than
        i32.

2016-06-10  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/nested-funcs.exp: New.
        * gdb.fortran/nested-funcs.f90: New.

2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>

        * gdb.base/examine-backward.c: New file.
        * gdb.base/examine-backward.exp: New file.

2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-record-changed.exp: Adjust =record-started output
        matching.

2016-06-02  Tom Tromey  <tom@tromey.com>

        PR python/18984:
        * gdb.python/py-shared.exp: Add solib_name test.

2016-06-02  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-memory-changed.exp: Fix filename passed to untested.

2016-05-31  Martin Galvan  <martin.galvan@tallertechnologies.com>

        PR c++/19893
        * gdb.dwarf2/implref.exp: Rename to...
        * gdb.dwarf2/implref-const.exp: ...this.  Also add more test statements.
        * gdb.dwarf2/implref-array.c: New file.
        * gdb.dwarf2/implref-array.exp: Likewise.
        * gdb.dwarf2/implref-global.c: Likewise.
        * gdb.dwarf2/implref-global.exp: Likewise.
        * gdb.dwarf2/implref-struct.c: Likewise.
        * gdb.dwarf2/implref-struct.exp: Likewise.

2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/trace-condition.exp: Add 64bit tests.

2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/trace-condition.c (marker): Adapt signature to 8 to 64
        bits types.
        (main): Adapt to 8 to 64 bits types.
        * gdb.trace/trace-condition.exp: Add new tests.

2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/trace-condition.exp: Add emit_less_unsigned test.

2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/ftrace.exp (test_ftrace_condition): Remove.
        Move condition tests...
        * gdb.trace/trace-condition.exp: Here.

2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/trace-condition.exp: Add counter-case tests.

2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR c++/15231
        * gdb.ada/out_of_line_in_inlined.exp: Remove xfails.
        * gdb.dwarf2/dw2-lexical-block-bare.exp: New file.

2016-05-27  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-many-short-lived-threads.exp (bad_dejagnu):
        New procedure.
        (top level): Call it, and bail out of DejaGnu is known to be bad.

2016-05-27  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/whatis.c: Extend the test case.
        * gdb.base/whatis.exp: Add additional tests.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

* gdb.fortran/type.f90: Add pointer variable.
* gdb.fortran/whatis_type.exp: Add whatis/ptype of pointers.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-type.exp: Fix testcase name.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-type.exp: Access elements in nested structs.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/type.f90: Add nested structures.
        * gdb.fortran/whatis-type.exp: Whatis/ptype nested structures.
        * gdb.fortran/derived-type.exp: Adapt expected output.
        * gdb.fortran/vla-type.exp: Adapt expected output.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/whatis_type.exp: Adapt expected output.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/print_type.exp: Fix expected output.
        * gdb.fortran/whatis_type.exp: Fix expected output.

2016-05-25  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/whatis_type.exp: Use multi_line.

2016-05-24  Tom Tromey  <tom@tromey.com>

        PR python/17386:
        * gdb.python/py-value.exp (test_value_numeric_ops): Add tests that
        use value as an index.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/17981:
        * gdb.python/py-breakpoint.exp (test_bkpt_basic): Add test for
        no-breakpoint case.

2016-05-24  Pedro Alves  <palves@redhat.com>

        PR gdb/19828
        * gdb.threads/clone-attach-detach.c: New file.
        * gdb.threads/clone-attach-detach.exp: New file.

2016-05-24  Francis Ricci  <francisjricci@gmail.com>  (tiny patch)

        * gdb.base/annota-input-while-running.exp: Fix syntax error.

2016-05-23  Tom Tromey  <tom@tromey.com>

        PR python/19438, PR python/18393:
        * gdb.python/py-progspace.exp: Add "dir" test.
        * gdb.python/py-objfile.exp: Add "dir" test.

2016-05-23  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/thumb-prologue.exp: Use standard_testfile.
        * gdb.arch/thumb2-it.exp: Likewise.

2016-05-18  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-threads-interrupt.c: New file.
        * gdb.mi/mi-threads-interrupt.exp: New file.

2016-05-17  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/18077
        * gdb.mi/mi-async-run.exp: New file.
        * gdb.mi/mi-async-run.c: New file.

2016-05-17  Tom Tromey  <tom@tromey.com>
            Manish Goregaokar <manishsmail@gmail.com>

        * lib/rust-support.exp: New file.
        * lib/gdb.exp (skip_rust_tests): New proc.
        (build_executable_from_specs): Handle rust.
        * lib/future.exp (gdb_find_rustc): New proc.
        (gdb_default_target_compile): Handle rust.
        * gdb.rust/expr.exp: New file.
        * gdb.rust/generics.exp: New file.
        * gdb.rust/generics.rs: New file.
        * gdb.rust/methods.exp: New file.
        * gdb.rust/methods.rs: New file.
        * gdb.rust/modules.exp: New file.
        * gdb.rust/modules.rs: New file.
        * gdb.rust/simple.exp: New file.
        * gdb.rust/simple.rs: New file.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * gdb.base/default.exp (set language): Add rust.

2016-05-17  Tom Tromey  <tom@tromey.com>

        * gdb.gdb/unittest.exp: New file.

2016-05-16  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/batch-preserve-term-settings.exp: Remove variable
        shell_prompt.  Update shell_prompt_re.

2016-05-12  Doug Evans  <dje@google.com>

        PR symtab/19999
        * lib/dwarf.exp (build_executable_from_fission_assembler): Pass
        $options when building executable.
        * gdb.dwarf2/fission-loclists-pie.S: New file.
        * gdb.dwarf2/fission-loclists-pie.exp: New file.

2016-05-04  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/solib-display.exp: Check for [use_gdb_stub] instead
        of [is_remote target],

2016-05-04  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (use_gdb_stub): New procedure.

2016-05-03  Yunlian Jiang <yunlian@google.com>
            Doug Evans  <dje@google.com>

        PR symtab/19914
        * gdb.dwarf2/dwp-sepdebug.c: New file.
        * gdb.dwarf2/dwp-sepdebug.exp: New file.

2016-05-02  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/detach.exp: Remove is_remote check.

2016-05-02  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/annota-input-while-running.exp: Don't check for
        [is_remote target].  Enable annotations after running to main.
        Remove unused "set test..." line.

2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/trace-enable-disable.exp: New file.
        * gdb.trace/trace-enable-disable.c: New file.

2016-04-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.arch/ftrace-insn-reloc.exp: Save gdb_load_shlib result,
        use it in info sharedlibrary test.
        * gdb.trace/ftrace-lock.exp: Likewise.
        * gdb.trace/ftrace.exp: Likewise.
        * gdb.trace/range-stepping.exp: Likewise.
        * gdb.trace/trace-break.exp: Likewise.
        * gdb.trace/trace-condition.exp: Likewise.
        * gdb.trace/trace-mt.exp: Likewise.

2016-04-27  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_load_shlibs): Rename to...
        (gdb_load_shlib): ... this.
        * gdb.arch/ftrace-insn-reloc.exp: Adjust gdb_load_shlibs ->
        gdb_load_shlib.
        * gdb.base/catch-load.exp (one_catch_load_test): Likewise.
        * gdb.base/ctxobj.exp: Likewise.
        * gdb.base/dprintf-pending.exp: Likewise.
        * gdb.base/dso2dso.exp: Likewise.
        * gdb.base/fixsection.exp: Likewise.
        * gdb.base/gcore-relro.exp: Likewise.
        * gdb.base/gdb1555.exp: Likewise.
        * gdb.base/global-var-nested-by-dso.exp: Likewise.
        * gdb.base/gnu-ifunc.exp: Likewise.
        * gdb.base/hbreak-in-shr-unsupported.exp: Likewise.
        * gdb.base/jit-so.exp (one_jit_test): Likewise.
        * gdb.base/pending.exp: Likewise.
        * gdb.base/print-file-var.exp: Likewise.
        * gdb.base/print-symbol-loading.exp: Likewise.
        * gdb.base/shlib-call.exp: Likewise.
        * gdb.base/shreloc.exp: Likewise.
        * gdb.base/so-impl-ld.exp: Likewise.
        * gdb.base/solib-disc.exp: Likewise.
        * gdb.base/solib-nodir.exp: Likewise.
        * gdb.base/solib-overlap.exp: Likewise.
        * gdb.base/solib-symbol.exp: Likewise.
        * gdb.base/solib-weak.exp (do_test): Likewise.
        * gdb.base/sym-file.exp: Likewise.
        * gdb.base/symtab-search-order.exp: Likewise.
        * gdb.base/type-opaque.exp: Likewise.
        * gdb.base/unload.exp: Likewise.
        * gdb.base/watchpoint-solib.exp: Likewise.
        * gdb.compile/compile.exp: Likewise.
        * gdb.cp/gdb2384.exp: Likewise.
        * gdb.cp/infcall-dlopen.exp: Likewise.
        * gdb.cp/re-set-overloaded.exp: Likewise.
        * gdb.fortran/library-module.exp: Likewise.
        * gdb.opt/solib-intra-step.exp: Likewise.
        * gdb.python/py-finish-breakpoint.exp: Likewise.
        * gdb.python/py-shared.exp: Likewise.
        * gdb.reverse/solib-precsave.exp: Likewise.
        * gdb.reverse/solib-reverse.exp: Likewise.
        * gdb.server/solib-list.exp: Likewise.
        * gdb.threads/dlopen-libpthread.exp: Likewise.
        * gdb.threads/tls-shared.exp: Likewise.
        * gdb.threads/tls-so_extern.exp: Likewise.
        * gdb.trace/change-loc.exp: Likewise.
        * gdb.trace/ftrace-lock.exp: Likewise.
        * gdb.trace/ftrace.exp: Likewise.
        * gdb.trace/mi-tracepoint-changed.exp (test_reconnect): Likewise.
        * gdb.trace/pending.exp: Likewise.
        * gdb.trace/range-stepping.exp: Likewise.
        * gdb.trace/strace.exp (strace_remove_socket): Likewise.
        (strace_info_marker): Likewise.
        (strace_probe_marker): Likewise.
        (strace_trace_on_same_addr): Likewise.
        (strace_trace_on_diff_addr): Likewise.
        * gdb.trace/trace-break.exp: Likewise.
        * gdb.trace/trace-condition.exp: Likewise.
        * gdb.trace/trace-mt.exp: Likewise.

2016-04-27  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_load_shlibs):  Accept a single argument.  Return
        result of gdb_remote_download.
        * gdb.base/ctxobj.exp: Split gdb_load_shlibs call.
        * gdb.base/dso2dso.exp: Likewise.
        * gdb.base/global-var-nested-by-dso.exp: Likewise.
        * gdb.base/print-file-var.exp: Likewise.
        * gdb.base/shlib-call.exp: Likewise.
        * gdb.base/shreloc.exp: Likewise.
        * gdb.base/solib-overlap.exp: Likewise.
        * gdb.base/solib-weak.exp (do_test): Likewise.
        * gdb.base/unload.exp: Likewise.

2016-04-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/branch-to-self.exp: Skip it if gdb,nosignals
        exists.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>

        * vla-type.exp: Print structure from toplevel.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-type.f90: Add test for static and dynamic arrays
        of dynamic types.
        * gdb.fortran/vla-type.exp: Add test for static and dynamic arrays
        of dynamic types.

2016-04-26  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-type.f90: New file.
        * gdb.fortran/vla-type.exp: New file.

2016-04-25  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/branch-to-self.c: New file.
        * gdb.base/branch-to-self.exp: New file.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/unavailable.exp (gdb_collect_globals_test_1): Match
        more after $hex.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/annota1.exp: Set breakpoint on line $main_line.
        * gdb.base/annota3.exp: Likewise.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/step-precsave.exp: Do one step and test program
        stops in "callee" and do multiple steps until program goes out
        of "callee".
        * gdb.reverse/step-reverse.exp: Likewise.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/signal.exp: Also pass if
        $tracepoint_hits($i) > $iterations.

2016-04-22  Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/signal.c: New file.
        * gdb.trace/signal.exp: New file.

2016-04-19  Doug Evans  <xdje42@gmail.com>

        * gdb.base/bad-file.exp: New file.

2016-04-18  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * gdb.dwarf2/implref.exp: New file.

2016-04-18  Bernhard Heckel <bernhard.heckel@intel.com>

        * gdb.fortran/common-block.exp: Use type naming defined in lib fortran.
        * gdb.fortran/derived-type.exp: Use type naming defined in lib fortran.
        * gdb.fortran/multi-dim.exp: Use type naming defined in lib fortran.
        * gdb.fortran/vla-datatypes.exp: Use type naming defined in lib fortran.
        * gdb.fortran/vla-ptype-sub.exp: Use type naming defined in lib fortran.
        * gdb.fortran/vla-ptype.exp: Use type naming defined in lib fortran.
        * gdb.fortran/whatis_type.exp: Use type naming defined in lib fortran.
        * lib/fortran.exp (fortran_int4): New procedure.
        (fortran_real4, fortran_real8, fortran_complex4): Likewise.
        (fortran_logical4): Likewise.

2016-04-18  Benrhard Heckel <bernhard.heckel@intel.com>

        * lib/gdb.exp (gdb_compile_shlib): Add flag for ICC compiler.

2016-04-18  Bernhard Heckel <bernhard.heckel@intel.com>

        * lib/compiler.c: Add Intel specific preprocessor macros.
        * lib/compiler.cc: Likewise.

2016-04-13  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.server/connect-with-no-symbol-file.c: New file.
        * gdb.server/connect-with-no-symbol-file.exp: New file.

2016-04-13  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_remote_download): Fix and extend comment.

2016-04-13  Simon Marchi  <simon.marchi@ericsson.com>

        * boards/gdbserver-base.exp (${board}_download): Copy source file to
        standard output directory.

2016-04-13  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/trace-condition.exp (foreach): Fix emit_sub testcase.

2016-04-13  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/instruction_history.c (loop): Add declaration.

2016-04-12  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/ftrace.exp (proc): Change test prefix from "ond" to "cond".

2016-04-09  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.python/py-mi-events-gdb.py (signal_stop_handler): Add
        parentheses to print.
        (continue_handler): Likewise.

2016-04-08  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.server/solib-list.exp: Remove is_remote check.
        Pass shlib= to gdb_compile.  Don't link shared library with
        -soname.  Call gdb_remote_download instead of gdb_load_shlibs.
        Run binary filename through "readlink -f" on the target.

2016-04-08  Pedro Alves  <palves@redhat.com>

        * gdb.server/solib-list.exp: Don't use gdb_load.  Instead pass the
        interpreter filename as argument to gdbserver_spawn.
        * lib/gdbserver-support.exp (gdbserver_download_current_prog):
        Return empty if $last_loaded_file does not exist.

2016-04-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix compatibility with gcc-4.8.5-4.el7.x86_64.
        * gdb.base/jit-main.c: Use exit after usage.

2016-04-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/gdbhistsize-history.exp: Save and unset GDBHISTFILE and
        GDBHISTSIZE prior to the tests.
        * gdb.base/gdbinit-history.exp: Likewise.

2016-04-07  Pedro Alves  <palves@redhat.com>

        * gdb.compile/compile.exp: Use gdb_compile with "shlib=" option
        instead of build_executable.  Use gdb_load_shlibs.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/finish-reverse-bkpt.exp: Use temporary breakpoint.
        Execute "si" command.

2016-04-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/next-reverse-bkpt-over-sr.exp: Match the breakpoint
        number instead of the comments on some line.

2016-04-06  Don Breazeal  <donb@codesourcery.com>

        * gdb.dwarf2/dw2-opt-structptr.c: New test program.
        * gdb.dwarf2/dw2-opt-structptr.exp: New test script.

2016-04-06  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.threads/dlopen-libpthread.exp: Set binfile_lib using
        standard_output_file.  Remove unused binfile variable.

2016-04-05  Catalin Udma  <catalin.udma@freescale.com>

        * gdb.python/py-mi-objfile-gdb.py: Use "list main" command.
        * gdb.python/py-mi-objfile.exp: Match "list main" output
        in console format.

2016-04-05  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.arch/ftrace-insn-reloc.exp: Check for IPA basename instead of
        absolute.

2016-04-05  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/ftrace-lock.exp: Check for IPA basename instead of
        absolute.
        * gdb.trace/ftrace.exp: Likewise.
        * lib/gdb.exp (gdb_compile): Set rpath $ORIGIN for non-remote
        targets as well.
        (gdb_compile_shlib): Set SONAME for non-remote targets as well.
        (gdb_load_shlibs): Copy libraries to test directory when testing
        natively.  Only set solib-search-path if testing remotely.
        * lib/mi-support.exp (mi_load_shlibs): Likewise.

2016-04-05  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/jit-so.exp: Use gdb_remote_download instead of
        gdb_download.  Use it even if the target is not remote.
        * gdb.base/jit.exp (compile_jit_test): Likewise.
        * lib/gdb.exp (gdb_remote_download): Copy files to the standard
        output directory if the destination board is local, otherwise use
        the standard remote_download from DejaGnu.
        (gdb_download): Remove.
        (gdb_load_shlibs): Use gdb_remote_download instead of
        gdb_download.
        * lib/gdbserver-support.exp (gdbserver_download_current_prog):
        Use gdb_remote_download instead of gdb_download.  Use it even if
        the target is not remote.
        * lib/mi-support.exp (mi_load_shlibs): Use gdb_remote_download
        instead of gdb_download.

2016-04-04  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.mi/mi-breakpoint-changed.exp: Add some with_test_prefix.
        (test_insert_delete_modify): Call mi_load_shlibs before trying to
        run.

2016-04-01  Artemiy Volkov  <artemiyv@acm.org>

        PR gdb/19820
        * gdb.base/printcmds.exp: Add artificial arrays tests.

2016-03-31  Pedro Alves  <palves@redhat.com>

        PR gdb/19858
        * gdb.base/jit-main.c: Include unistd.h.
        (ATTACH): Define to 0 if not already defined.
        (wait_for_gdb, mypid): New globals.
        (WAIT_FOR_GDB): New macro.
        (MAIN): Set an alarm.  Store the process's pid.  Wait for GDB at
        some breakpoint locations.
        * gdb.base/jit.exp (clean_reattach, continue_to_test_location):
        New procedures.
        (one_jit_test): Add REATTACH parameter, and handle it.  Use
        continue_to_test_location.
        (top level): Test attach, and adjusts calls to one_jit_test.

2016-03-31  Pedro Alves  <palves@redhat.com>

        PR gdb/19858
        * gdb.base/jit.exp (compile_jit_test): Add intro comment.  Add
        BINSUFFIX parameter, and handle it.
        (top level): Adjust calls compile_jit_test.

2016-03-31  Catalin Udma  <catalin.udma@freescale.com>

        PR python/19743
        * gdb.python/py-mi-events-gdb.py: New file.
        * gdb.python/py-mi-events.c: New file.
        * gdb.python/py-mi-events.exp: New file.

2016-03-30  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/until-precsave.exp: Match function name only.
        * gdb.reverse/until-reverse.c (main): Don't call fprintf nor printf.
        Move malloc to a condition block.
        * gdb.reverse/until-reverse.exp: Match function name only.

2016-03-29  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/ftrace.exp: Set arg0exp for s390.
        * gdb.trace/mi-trace-frame-collected.exp: Expect 4 registers on s390.
        * gdb.trace/mi-trace-unavailable.exp: Set pcnum for s390, add gpr0num
        variable for GPR 0 instead of assuming it is register 0.
        * gdb.trace/trace-common.h: Add s390 fast tracepoint placeholder.
        * lib/trace-support.exp: Add s390 registers.

2016-03-29  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-neon.exp: Pass debug to prepare_for_testing.

2016-03-24  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/break-reverse.exp: Add quotation mark in the
        test message.

2016-03-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-multiarch.exp: Use standard_testfile instead of
        maintaining separate logic for constructing the output path.

2016-03-16  Don Breazeal  <donb@codesourcery.com>

        * gdb.threads/forking-threads-plus-breakpoint.c (thread_forks):
        Retry fork and waitpid on interrupted system call errors.
        * gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
        Use with_timeout_factor to increase timeout by factor of 10.

2016-03-15  Don Breazeal  <donb@codesourcery.com>

        * gdb.cp/scope-err.cc: New test program.
        * gdb.cp/scope-err.exp: New test script.
        * gdb.linespec/ls-errs.c (myfunction): Expanded to have multiple
        lines and "set breakpoint here" comment.
        * gdb.linespec/ls-errs.exp: Added C++ testing and new test case.
        Fixed some whitespace and format issues.
        * gdb.mi/mi-linespec-err-cp.cc: New test program.
        * gdb.mi/mi-linespec-err-cp.exp: New test script.

2016-03-15  Doug Evans  <dje@google.com>

        * gdb.xml/extra-regs.xml: Add enum, mixed_flags values.
        * gdb.xml/tdesc-regs.exp (load_description): New arg xml_file.
        All callers updated.  Add tests for enums, mixed flags register.

2016-03-15  Doug Evans  <dje@google.com>

        * gdb.base/skip.c (main): Call test_skip_file_and_function.
        * gdb.base/skip.exp: Remove hand calling test_skip_file_and_function.

2016-03-14  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/default.exp: Add $_as_string to the list of expected
        convenience functions.

2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/maint.exp: New tests for 'maint info line-table'.

2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.python/py-as-string.exp: New file.
        * gdb.python/py-as-string.c: New file.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-into-signal.exp: Adjust to "Program received
        signal" -> "Thread NN received signal" output change.
        * gdb.threads/ia64-sigill.exp: Likewise.
        * gdb.threads/linux-dp.exp: Likewise.
        * gdb.threads/manythreads.exp: Likewise.
        * gdb.threads/pending-step.exp: Likewise.
        * gdb.threads/print-threads.exp: Likewise.
        * gdb.threads/sigstep-threads.exp: Likewise.
        * gdb.threads/staticthreads.exp: Likewise.
        * gdb.threads/tls.exp: Likewise.

2016-03-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/command-line-input.exp: New file.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/ftrace.exp: Set arg0exp for ppc.
        * gdb.trace/mi-trace-unavailable.exp: Set pcnum for ppc.
        * gdb.trace/pending.exp: Accept leading dot before function name.
        * gdb.trace/trace-common.h: Add fast tracepoint dummy insn for ppc.
        * lib/trace-support.exp: Set registers for ppc.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/entry-values.exp: Link ${binfile}1.o to ${binfile}1 and
        use it for disassembly; accept .main in addition to main in backtrace.

2016-03-09  Wei-cheng Wang  <cole945@gmail.com>
            Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/actions.c (gdb_recursion_test_fp): New typedef.
        (gdb_recursion_test_ptr): New global variable.
        (gdb_recursion_test): Call gdb_recursion_test_ptr instead of
        gdb_recursion_test.
        (gdb_c_test): Ditto.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/change-loc.exp: Don't depend on tracepoint location
        ordering.

2016-03-09  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/unavailable-dwarf-piece.c (foo): Add foo_start_lbl label.
        (bar): Add bar_start_lbl label.
        * gdb.trace/unavailable-dwarf-piece.exp: Use foo/bar_start_lbl instead
        of foo/bar for emitting DWARF and tracing.

2016-03-06  Sergio Durigan Junior  <sergiodj@redhat.com>

        * analyze-racy-logs.py: Set executable bit.

2016-03-05  Sergio Durigan Junior  <sergiodj@redhat.com>

        * Makefile.in (DEFAULT_RACY_ITER): New variable.
        (CHECK_TARGET_TMP): Likewise.
        (check-single-racy): New rule.
        (check-parallel-racy): Likewise.
        (TEST_TARGETS): Adjust rule to account for RACY_ITER.
        (do-check-parallel-racy): New rule.
        (check-racy/%.exp): Likewise.
        * README (Racy testcases): New section.
        * analyze-racy-logs.py: New file.

2016-03-03  Doug Evans  <dje@google.com>

        * gdb.base/skip.exp: Use with_test_prefix.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/step-over-syscall.exp (step_over_syscall): Kfail.
        Invoke step_over_syscall "clone" and break_cond_on_syscall
        "clone".
        * gdb.base/step-over-clone.c: New file.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/step-over-syscall.exp (disp_step_cross_syscall): Fix
        code format.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-fork.c: Rename to ...
        * gdb.base/step-over-fork.c: ... it.  New file.
        * gdb.base/disp-step-vfork.c: Rename to ...
        * gdb.base/step-over-vfork.c: ... it.  New file.
        * gdb.base/disp-step-syscall.exp: Rename to ...
        * gdb.base/step-over-syscall.exp: ... it.  New file.
        (disp_step_cross_syscall): Rename to ...
        (step_over_syscall): ... it.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-syscall.exp (break_cond_on_syscall): New.
        If target supports condition evaluation on target, invoke
        break_cond_on_syscall for fork and vfork.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-syscall.exp: Don't invoke
        support_displaced_stepping.
        (disp_step_cross_syscall): Test with displaced stepping off and
        on if supported.

2016-03-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-syscall.exp (check_pc_after_cross_syscall): New
        proc.
        (setup): New proc.
        (disp_step_cross_syscall): Move code to check_pc_after_cross_syscall
        and setup.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-history.exp: Remove breakpoint.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.fortran/vla-history.exp: Lookup array elements and printing
        exceeds timeout.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.cp/vla-cxx.cc: Insert dummy assignment as anchor for an
        breakpoint.

2016-03-02  Bernhard Heckel  <bernhard.heckel@intel.com>

        * gdb.mi/vla.f90: Nullify pointer after declaration.

2016-03-01  Pedro Alves  <palves@redhat.com>

        * gdb.trace/ftrace-lock.c: Include <unistd.h>.

2016-03-01  Pedro Alves  <palves@redhat.com>

        * gdb.threads/watchpoint-fork-child.c: Include "watchpoint-fork.h"
        before anything else.
        * gdb.threads/watchpoint-fork-mt.c: Likewise.  Don't define
        _GNU_SOURCE here.
        * gdb.threads/watchpoint-fork-st.c: Include "watchpoint-fork.h"
        before anything else.
        * gdb.threads/watchpoint-fork.h: Define _GNU_SOURCE.

2016-03-01  Pedro Alves  <palves@redhat.com>

        * gdb.base/catch-fork-kill.c: Include <sys/wait.h>.

2016-03-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-disp-step.exp: Use standard_testfile and
        prepare_for_testing.

2016-03-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-neon.exp: Pass quiet to prepare_for_testing.

2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-tdbregs.exp: Use prepare_for_testing instead of
        manually constructing the output path.

2016-03-01  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-stackless.S: New.
        * gdb.arch/s390-stackless.exp: New.

2016-02-28  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/circular.c: New file.
        * gdb.dlang/circular.exp: New file.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/insn-reverse.c [__arm__] (ext_reg_load): New.
        [__arm__] (ext_reg_mov, ext_reg_push_pop): New.
        (testcases): Update.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/aarch64.c: Rename to ...
        * gdb.reverse/insn-reverse.c: ... it.
        * gdb.reverse/aarch64.exp: Rename to ...
        * gdb.reverse/insn-reverse.exp: ... it.

2016-02-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/aarch64.c: [__aarch64__] Include arm_neon.h.
        (testcase_ftype): New.
        (testcases): New array.
        (n_testcases): New.
        (main): Call each element in testcases.
        * gdb.reverse/aarch64.exp: Remove is_aarch64_target check.
        (read_testcase): New.
        Do the tests in a loop.

2016-02-25  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/branches.c: Remove.

2016-02-25  Marcin Kościelnicki  <koriakin@0x04.net>

        PR gdb/13808
        * gdb.trace/ftrace.exp (test_fast_tracepoints): Remove kfail.

2016-02-25  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/ftrace.exp: Remove unnecessary target check.

2016-02-25  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/entry-values.exp: Surround $call_insn with '\y',
        change x86_64 call_insn to 'callq'.

2016-02-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/tfile-avx.c: Move to...
        * gdb.trace/tracefile-pseudo-reg.c: Here.
        * gdb.trace/tfile-avx.exp: Move to...
        * gdb.trace/tracefile-pseudo-reg.exp: Here.

2016-02-24  Gary Benson <gbenson@redhat.com>

        * gdb.base/attach-pie-noexec.exp: Do not expect an error
        message on attach.

2016-02-23  Doug Evans  <dje@google.com>

        * gdb.base/skip.c (test_skip): New function.
        (end_test_skip_file_and_function): New function.
        (test_skip_file_and_function): New function.
        * gdb.base/skip1.c (test_skip): New function.
        (skip1_test_skip_file_and_function): New function.
        * gdb.base/skip.exp: Add tests for new skip options.
        * gdb.base/skip-solib.exp: Update expected output.
        * gdb.perf/skip-command.cc: New file.
        * gdb.perf/skip-command.exp: New file.
        * gdb.perf/skip-command.py: New file.

2016-02-22  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/unavailable.exp (gdb_unavailable_registers_test_1): Fix
        info registers pattern.

2016-02-18  Iain Buclaw  <ibuclaw@gdcproject.org>

        * lib/future.exp: Add D support.
        (gdb_find_gdc): New proc.
        (gdb_default_target_compile): Add D support.

2016-02-18  Wei-cheng Wang  <cole945@gmail.com>

        * gdb.trace/tspeed.c (myclock): Return wallclock instead of
        user+system time.
        (trace_speed_test): Determine the iteration count for a time
        between 15..30 seconds.

2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.arch/i386-mpx-sigsegv.c: New file.
        * gdb.arch/i386-mpx-sigsegv.exp: New file.
        * gdb.arch/i386-mpx-simple_segv.c: New file.
        * gdb.arch/i386-mpx-simple_segv.exp: New file.

2016-02-18  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
        Don't call setup_kfail.

2016-02-18  Yao Qi  <yao.qi@linaro.org>

        * gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
        Set "set breakpoint condition-evaluation" per $cond_bp_target.

2016-02-16  Doug Evans  <dje@google.com>

        * gdb.base/skip.c: Add copyright.  Whitespace cleanup.
        * gdb.base/skip1.c: Ditto.
        * gdb.base/skip.exp: Whitespace cleanup.

2016-02-16  Don Breazeal  <donb@codesourcery.com>

        PR remote/19496
        * gdb.threads/forking-threads-plus-breakpoint.exp (do_test):
        Remove kfail for PR remote/19496.

2016-02-16  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (standard_temp_file): Return a path specific to
        the runtest invocation.

2016-02-16  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/save-trace.exp: Change relative path to be in the
        standard output directory.

2016-02-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/i386-prologue.c: Add missing prototypes.

2016-02-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/i386-gnu-cfi.exp: Use standard_output_file.
        * gdb.arch/i386-prologue.exp: Likewise.
        * gdb.arch/i386-size.exp: Likewise.

2016-02-15  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/wrong_frame_bt_full.exp: Use standard_output_file to
        define object file path.
        * gdb.btrace/gcore.exp: Use standard_output_file to define core
        file path.
        * lib/opencl.exp (gdb_compile_opencl_hostapp): Use
        standard_output_file to define binfile.

2016-02-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix compatibility with recent gfortran-5.3.1.
        * gdb.fortran/vla-history.exp (print vla1 allocated)
        (print vla2 allocated, print $2, print $3): Remove
        (print $4): Rename to ...
        (print $2): ... here.
        (print $9): Rename to ...
        (print $5): ... here.
        (print $10): Rename to ...
        (print $6): ... here.
        * gdb.fortran/vla.f90: Add pvla initialization.

2016-02-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.fortran/vla-value-sub-finish.exp (set max-value-size 1024*1024):
        New test.
        * gdb.fortran/vla-value-sub.exp: Likewise.

2016-02-12  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/tfile-avx.c (main): Change ymm15 to xmm15.

2016-02-12  Simon Marchi  <simon.marchi@ericsson.com>

        * i386-biarch-core.exp: Define corefile using
        standard_output_file.

2016-02-12  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-single-step-kernel-helper.c: New.
        * gdb.arch/arm-single-step-kernel-helper.exp: New.

2016-02-12  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/tailcall-only.exp: New.
        * gdb.btrace/tailcall-only.c: New.
        * gdb.btrace/x86_64-tailcall-only.S: New.
        * gdb.btrace/i686-tailcall-only.S: New.

2016-02-11  Pedro Alves  <palves@redhat.com>

        * README (Parallel testing): Add missing double quotes.

2016-02-11  Pedro Alves  <palves@redhat.com>

        * README (Parallel testing): New section.
        (GDB_PARALLEL): Rewrite.
        (FORCE_PARALLEL): Document.

2016-02-11  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/tfile-avx.c: New test.
        * gdb.trace/tfile-avx.exp: New test.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR breakpoints/19546
        * gdb.base/infcall-exec.c: New file.
        * gdb.base/infcall-exec2.c: New file.
        * gdb.base/infcall-exec.exp: New file.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        * gdb.guile/scm-breakpoint.exp (test_bkpt_address): New procedure.
        (toplevel): Call test_bkpt_address.

2016-02-09  Keith Seitz  <keiths@redhat.com>

        PR python/19506
        * gdb.python/py-breakpoint.exp (test_bkpt_address): New procedure.
        (toplevel): Call test_bkpt_address.

2016-02-09  Simon Marchi  <simon.marchi@ericsson.com>

        * configure.ac: Use AC_CONFIG_FILES instead of passing arguments
        to AC_OUTPUT.
        * configure: Regenerate.

2016-02-09  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19548
        * gdb.base/execl-update-breakpoints.c (some_function): New
        function.
        (main): Call it.
        * gdb.base/execl-update-breakpoints.exp: Add a second breakpoint.
        Tighten expected GDB output.

2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (ALL_SUBDIRS): Remove.
        (clean mostlyclean): Do not recurse in ALL_SUBDIRS.
        (distclean maintainer-clean realclean): Likewise.
        * configure.ac (AC_OUTPUT): Remove gdb.*/Makefile.
        * configure: Regenerate.
        * gdb.ada/Makefile.in: Delete.
        * gdb.arch/Makefile.in: Likewise.
        * gdb.asm/Makefile.in: Likewise.
        * gdb.base/Makefile.in: Likewise.
        * gdb.btrace/Makefile.in: Likewise.
        * gdb.cell/Makefile.in: Likewise.
        * gdb.compile/Makefile.in: Likewise.
        * gdb.cp/Makefile.in: Likewise.
        * gdb.disasm/Makefile.in: Likewise.
        * gdb.dlang/Makefile.in: Likewise.
        * gdb.dwarf2/Makefile.in: Likewise.
        * gdb.fortran/Makefile.in: Likewise.
        * gdb.gdb/Makefile.in: Likewise.
        * gdb.go/Makefile.in: Likewise.
        * gdb.guile/Makefile.in: Likewise.
        * gdb.java/Makefile.in: Likewise.
        * gdb.linespec/Makefile.in: Likewise.
        * gdb.mi/Makefile.in: Likewise.
        * gdb.modula2/Makefile.in: Likewise.
        * gdb.multi/Makefile.in: Likewise.
        * gdb.objc/Makefile.in: Likewise.
        * gdb.opencl/Makefile.in: Likewise.
        * gdb.opt/Makefile.in: Likewise.
        * gdb.pascal/Makefile.in: Likewise.
        * gdb.perf/Makefile.in: Likewise.
        * gdb.python/Makefile.in: Likewise.
        * gdb.reverse/Makefile.in: Likewise.
        * gdb.server/Makefile.in: Likewise.
        * gdb.stabs/Makefile.in: Likewise.
        * gdb.threads/Makefile.in: Likewise.
        * gdb.trace/Makefile.in: Likewise.
        * gdb.xml/Makefile.in: Likewise.
        * lib/gdb.exp (make_gdb_parallel_path): Add check for
        GDB_PARALLEL.
        (standard_output_file): Remove check for GDB_PARALLEL, always
        return path in outputs/$subdir/$testname.

2016-02-08  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (abs_srcdir): Assign @abs_srcdir@.
        (site.exp): Assign abs_srcdir to tcl's srcdir.

2016-02-04  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/foll-exec-mode.c: Include limits.h.
        (main): Add parameters argc and argv.  Get directory from
        argv[0].
        * gdb.base/foll-exec-mode.exp: Don't pass -DBASEDIR in
        compilation.
        * gdb.base/foll-exec.c: Include limits.h.
        (main): Add parameters argc and argv.
        Get directory from argv[0].
        * gdb.base/foll-exec.exp: Don't pass -DBASEDIR in compilation.
        Adjust tests on the number of lines as source code changed.
        * gdb.base/foll-vfork-exit.c: Include limits.h.
        (main): Add one line of statement before vfork.
        * gdb.base/foll-vfork.c: Include limits.h and string.h.
        (main): Add parameters argc and argv.  Get directory from
        argv[0].
        * gdb.base/foll-vfork.exp: Don't pass -DBASEDIR in compilation.
        (setup_gdb): Set tbreak to skip some source lines.
        * gdb.multi/bkpt-multi-exec.c: Include limits.h.
        (main): Add parameters argc and argv.  Get directory from
        argv[0].
        * gdb.multi/bkpt-multi-exec.exp: Don't pass -DBASEDIR in
        compilation.
        * gdb.multi/multi-arch-exec.c: Include limits.h and string.h.
        (main): Add parameters argc and argv.  Get directory from
        argv[0].
        * gdb.multi/multi-arch-exec.exp: Don't pass -DBASEDIR in
        compilation.

2016-02-01  Doug Evans  <dje@google.com>

        * gdb.base/skip.exp: Clean up multiple references to same test name.

2016-02-01  Pedro Alves  <palves@redhat.com>

        PR remote/19496
        * gdb.threads/forking-threads-plus-breakpoint.exp
        (displaced_stepping_supported): New global.
        (probe_displaced_stepping_support): New procedure.
        (do_test): Add 'displaced' parameter, and use it.
        (top level): Check for displaced stepping support.  Add displaced
        stepping on/off testing axis.

2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/mi-vla-fortran.exp: Add XFAIL for accessing unassociated
        pointer.  Don't perform further tests on the unassociated pointer
        if the first test fails.

2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/max-value-size.c: New file.
        * gdb.base/max-value-size.exp: New file.
        * gdb.base/huge.exp: Disable max-value-size for this test.

2016-01-28  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/demangle.exp: Sync tests from libiberty testsuite.

2016-01-28  Yao Qi  <yao.qi@linaro.org>

        * gdb.fortran/vla-value.exp: Wrap test with with_timeout_factor.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR threads/19461
        * gdb.base/fork-running-state.c: New file.
        * gdb.base/fork-running-state.exp: New file.

2016-01-25  Pedro Alves  <palves@redhat.com>

        PR gdb/19494
        * gdb.base/catch-fork-kill.c: New file.
        * gdb.base/catch-fork-kill.exp: New file.

2016-01-25  Pedro Alves  <palves@redhat.com>

        * gdb.base/step-sw-breakpoint-adjust-pc.exp (foreach_with_prefix):
        Delete, moved to lib/gdb.exp.
        * gdb.threads/forking-threads-plus-breakpoint.exp
        (foreach_with_prefix): Likewise.
        * gdb.threads/process-dies-while-handling-bp.exp
        (foreach_with_prefix): Likewise.
        * lib/gdb.exp (foreach_with_prefix): New procedure.

2016-01-25  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/backtrace.exp: Bump stack collection fudge factor.
        * gdb.trace/entry-values.exp: Bump stack collection fudge factor.

2016-01-23  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/unavailable-dwarf-piece.exp: Fix bitfield handling on big
        endian targets.

2016-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        Fix testsuite compatibility with Guile.
        * gdb.gdb/selftest.exp (send ^C to child process): Drop expected Thread
        number.

2016-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix testsuite compatibility with Guile.
        * gdb.gdb/selftest.exp (send ^C to child process): Accept also Thread.
        (thread 1): New test for backtrace through signal handler.

2016-01-22  Yao Qi  <yao.qi@linaro.org>

        PR testsuite/19491
        * gdb.base/multi-forks.c: Include
        ../lib/unbuffer_output.c
        (main): Call gdb_unbuffer_output.

2016-01-21  Doug Evans  <dje@google.com>

        * lib/ada.exp (gdb_compile_ada): Fix typo.

2016-01-21  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/break-fun-addr.exp: New file.
        * gdb.base/break-fun-addr1.c: New file.
        * gdb.base/break-fun-addr2.c: New file.

2016-01-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.python/py-pp-maint.exp: Change/add enum flag tests.
        * gdb.python/py-pp-maint.c (enum flag_enum): Use more complex
        enum flag values.

2016-01-20  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/gnu_vector.exp: Re-establish handling for should_kfail
        when GDB can not set the vector return value.  Add more comments
        for clarification.

2016-01-20  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.trace/tspeed.exp:  Use shlib instead of libs in gdb_compile
        command.

2016-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (DO_RUNTEST): Add --status and update usages.

2016-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (check-single): Pass --status to runtest.
        (check/%.exp): Likewise.

2016-01-19  Simon Marchi  <simon.marchi@ericsson.com>

        * Makefile.in (check-parallel): Propagate return code from make
        do-check-parallel.

2016-01-19  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/ftrace.exp: Fix expected message on continue.
        * gdb.trace/pending.exp: Fix expected message on continue.
        * gdb.trace/trace-break.exp: Fix expected message on continue.

2016-01-18  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_test): Remove unused global references.

2016-01-18  Pedro Alves  <palves@redhat.com>

        * gdb.base/async-shell.exp: Adjust expected output.
        * gdb.base/dprintf-non-stop.exp: Adjust expected output.
        * gdb.base/siginfo-thread.exp: Adjust expected output.
        * gdb.base/watchpoint-hw-hit-once.exp: Adjust expected output.
        * gdb.java/jnpe.exp: Adjust expected output.
        * gdb.threads/clone-new-thread-event.exp: Adjust expected output.
        * gdb.threads/continue-pending-status.exp: Adjust expected output.
        * gdb.threads/leader-exit.exp: Adjust expected output.
        * gdb.threads/manythreads.exp: Adjust expected output.
        * gdb.threads/pthreads.exp: Adjust expected output.
        * gdb.threads/schedlock.exp: Adjust expected output.
        * gdb.threads/siginfo-threads.exp: Adjust expected output.
        * gdb.threads/signal-command-multiple-signals-pending.exp: Adjust
        expected output.
        * gdb.threads/signal-delivered-right-thread.exp: Adjust expected
        output.
        * gdb.threads/sigthread.exp: Adjust expected output.
        * gdb.threads/watchpoint-fork.exp: Adjust expected output.

2016-01-18  Yao Qi  <yao.qi@linaro.org>

        * gdb.guile/scm-section-script.c: Replace @progbits with
        %progbits.
        * gdb.python/py-section-script.c: Likewise.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * gdb.multi/tids.exp: Test star wildcard ranges.

2016-01-15  Pedro Alves  <palves@redhat.com>

        * gdb.multi/tids.exp (thr_apply_info_thr_error): Remove "p 1234"
        command from "thread apply" invocation.
        (thr_apply_info_thr_invalid): Default the expected output to the
        input tid list.
        (top level): Add tests that use convenience variables.  Add tests
        for "thread apply" with a valid TID list, but missing the command.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp: Expect $_gthread as well.
        * gdb.multi/tids.exp: Test $_gthread.
        * gdb.threads/thread-specific.exp: Test $_gthread.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * gdb.multi/tids.exp: Test "info threads -gid".

2016-01-13  Pedro Alves  <palves@redhat.com>

        * gdb.multi/tids.exp: Test InferiorThread.global_num and
        Breakpoint.thread.
        * gdb.python/py-infthread.exp: Test InferiorThread.global_num.

2016-01-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/break.exp: Adjust to output changes.
        * gdb.base/hbreak2.exp: Likewise.
        * gdb.base/sepdebug.exp: Likewise.
        * gdb.base/watch_thread_num.exp: Likewise.
        * gdb.linespec/keywords.exp: Likewise.
        * gdb.multi/info-threads.exp: Likewise.
        * gdb.threads/thread-find.exp: Likewise.
        * gdb.multi/tids.c: New file.
        * gdb.multi/tids.exp: New file.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-infthread.exp: Test InferiorThread.inferior.

2016-01-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp: Expect $_inferior as well.
        * gdb.multi/base.exp: Test $_inferior.

2016-01-13  Pedro Alves  <palves@redhat.com>

        PR breakpoints/19388
        * gdb.base/catch-signal-siginfo-cond.c: New file.
        * gdb.base/catch-signal-siginfo-cond.exp: New file.

2016-01-12  Josh Stone  <jistone@redhat.com>
            Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.base/catch-syscall.c (do_execve): New variable.
        (main): Conditionally trigger an execve.
        * gdb.base/catch-syscall.exp: Enable testing for remote targets.
        (test_catch_syscall_execve): New, check entry/return across execve.
        (do_syscall_tests): Call test_catch_syscall_execve.

2016-01-12  Pedro Alves  <palves@redhat.com>

        * gdb.base/random-signal.exp (do_test): New procedure, with body
        of testcase moved in.

2016-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/funcargs.exp (finish from indirectly called function):
        Reintroduce the case for 'First'.

2016-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/foll-vfork.exp (tcatch_vfork_then_parent_follow)
        (tcatch_vfork_then_child_follow_exec)
        (tcatch_vfork_then_child_follow_exit): Revert back DWARF vfork
        identification.

2016-01-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.guile/scm-value.exp (test_value_in_inferior): Set print elements
        and repeats to unlimited.
        * gdb.python/py-value.exp: Likewise.
        * lib/gdb.exp (gdb_has_argv0): Save and temporarily set print elements
        and repeats to unlimited.

2016-01-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.multi/goodbye.c: Fix compilation warnings by adding return types
        and reordering the functions.
        * gdb.multi/hangout.c: Likewise.
        * gdb.multi/hello.c: Likewise.

2016-01-08  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.perf/lib/perftest/perftest.py: Change relative imports to
        absolute.
        (SingleStatisticTestResult.report): Use dict.keys instead of
        dict.iterkeys.

2016-01-06  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-infthread.exp: Fix typo.  Expect t0.num to be 1.

2016-01-04  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/dlopen.exp: New.
        * gdb.btrace/dlopen.c: New.
        * gdb.btrace/dlopen-dso.c: New.

2015-12-25  Sandra Loosemore  <sandra@codesourcery.com>

        * lib/gdb.exp (gdb_test): Update comments to clarify that the
        PATTERN argument is optional.

2015-12-24  Joel Brobecker  <brobecker@adacore.com>

        * lib/ada.exp (target_compile_ada_from_dir): New function.
        (gdb_compile_ada): Reimplement avoiding the use of project files.
        * gdb.ada/gnat_ada.gpr: Delete.
        * gdb.ada/cond_lang.exp: Adjust test to make path before
        filename optional.
        * gdb.ada/small_reg_param.exp: Likewise.

2015-12-22  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/foll-vork.exp: Remove HP-UX special case.

2015-12-22  Thomas Preud'homme  <thomas.preudhomme@arm.com>

        * lib/mi-support.exp (mi_run_cmd_full): Add an expect for the CLI jump
        case.

2015-12-21  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/break.exp: Remove dead code.
        * gdb.base/sepdebug.exp: Likewise.

2015-12-21  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.asm/asm-source.exp: Remove HP-UX references.
        * gdb.base/annota1.exp: Likewise.
        * gdb.base/annota3.exp: Likewise.
        * gdb.base/attach.exp: Likewise.
        * gdb.base/bigcore.exp: Likewise.
        * gdb.base/break.exp: Likewise.
        * gdb.base/call-ar-st.exp: Likewise.
        * gdb.base/callfuncs.exp: Likewise.
        * gdb.base/catch-fork-static.exp: Likewise.
        * gdb.base/display.exp: Likewise.
        * gdb.base/foll-exec-mode.exp: Likewise.
        * gdb.base/foll-exec.exp: Likewise.
        * gdb.base/foll-fork.exp: Likewise.
        * gdb.base/foll-vfork.exp: Likewise.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/hbreak2.exp: Likewise.
        * gdb.base/inferior-died.exp: Likewise.
        * gdb.base/interrupt.exp: Likewise.
        * gdb.base/multi-forks.exp: Likewise.
        * gdb.base/nodebug.exp: Likewise.
        * gdb.base/sepdebug.exp: Likewise.
        * gdb.base/solib1.c: Likewise.
        * gdb.base/step-test.exp: Likewise.
        * gdb.mi/non-stop.c: Likewise.
        * gdb.mi/pthreads.c: Likewise.
        * gdb.multi/bkpt-multi-exec.ex: Likewise.
        * gdb.threads/pthreads.c: Likewise.
        * gdb.threads/staticthreads.exp: Likewise.
        * lib/future.exp: Likewise.
        * lib/gdb.exp: Likewise.
        * gdb.base/so-indr-cl.c: Remove.
        * gdb.base/so-indr-cl.exp: Likewise.
        * gdb.base/solib.c: Likewise.
        * gdb.base/solib.exp: Likewise.
        * gdb.base/solib2.c: Likewise.

2015-12-21  Simon Marchi  <simon.marchi@polymtl.ca>

        * gdb.base/break.exp: Remove references to HP CC/aCC compilers.
        * gdb.base/call-ar-st.exp: Likewise.
        * gdb.base/callfuncs.exp: Likewise.
        * gdb.base/condbreak.exp: Likewise.
        * gdb.base/constvars.exp: Likewise.
        * gdb.base/hbreak2.exp: Likewise.
        * gdb.base/langs.exp: Likewise.
        * gdb.base/list.exp: Likewise.
        * gdb.base/long_long.exp: Likewise.
        * gdb.base/ptype.exp: Likewise.
        * gdb.base/scope.exp: Likewise.
        * gdb.base/signals.exp: Likewise.
        * gdb.base/so-impl-ld.exp: Likewise.
        * gdb.base/varargs.exp: Likewise.
        * gdb.base/volatile.exp: Likewise.
        * gdb.base/whatis.exp: Likewise.
        * gdb.cp/cplusfuncs.exp: Likewise.
        * gdb.cp/inherit.exp: Likewise.
        * gdb.cp/local.exp: Likewise.
        * gdb.cp/member-ptr.exp: Likewise.
        * gdb.cp/method.exp: Likewise.
        * gdb.cp/overload.exp: Likewise.
        * gdb.cp/templates.exp: Likewise.
        * gdb.stabs/weird.exp: Likewise.
        * lib/compiler.c: Likewise.
        * lib/compiler.cc: Likewise.
        * lib/cp-support.exp: Likewise.
        * lib/gdb.exp: Likewise.

2015-12-20  Simon Marchi  <simon.marchi@polymtl.ca>

        * configure.ac: Remove HP-UX case.
        * configure: Regenerate.

2015-12-18  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (gdb_compile): Add function doc.

2015-12-17  Pedro Alves  <palves@redhat.com>

        PR threads/19354
        * gdb.multi/info-threads.exp: New file.

2015-12-15  Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/ftrace.exp: Set arg0exp to "$x0" if target
        is aarch64*-*-*.

2015-12-14  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/history-duplicates.exp: Skip if no readline support.

2015-12-14  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/gdbinit-history.exp: Skip for remote-host testing.

2015-12-14  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/gdbhistsize-history.exp: Skip for remote-host testing.

2015-12-14  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/completion.exp: Skip tests that interrupt GDB with
        ctrl-C if nointerrupts target property is set.
        * gdb.base/double-prompt-target-event-error.exp: Likewise.
        * gdb.base/paginate-after-ctrl-c-running.exp: Likewise.
        * gdb.base/paginate-bg-execution.exp: Likewise.
        * gdb.base/paginate-execution-startup.exp: Likewise.
        * gdb.base/random-signal.exp: Likewise.
        * gdb.base/range-stepping.exp: Likewise.
        * gdb.cp/annota2.exp: Likewise.
        * gdb.cp/annota3.exp: Likewise.
        * gdb.gdb/selftest.exp: Likewise.
        * gdb.threads/continue-pending-status.exp: Likewise.
        * gdb.threads/leader-exit.exp: Likewise.
        * gdb.threads/manythreads.exp: Likewise.
        * gdb.threads/pthreads.exp: Likewise.
        * gdb.threads/schedlock.exp: Likewise.
        * gdb.threads/sigthread.exp: Likewise.

2015-12-11  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/execl-update-breakpoints.exp (main): Enable for target
        remote.
        * gdb.base/foll-exec-mode.exp (main): Disable for target remote.
        * gdb.base/foll-exec.exp (main): Enable for target remote.
        * gdb.base/foll-fork.exp (main): Likewise.
        * gdb.base/foll-vfork.exp (main): Likewise.
        * gdb.base/multi-forks.exp (main): Likewise, and use clean_restart.
        (proc continue_to_exit_bp_loc): Use clean_restart.
        * gdb.base/pie-execl.exp (main): Disable for target remote.
        * gdb.base/watch-vfork.exp (main): Enable for target remote.
        * gdb.mi/mi-nsthrexec.exp (main): Likewise.
        * gdb.threads/execl.exp (main): Likewise.
        * gdb.threads/fork-child-threads.exp (main): Likewise.
        * gdb.threads/fork-plus-threads.exp (main): Disable for target
        remote.
        * gdb.threads/fork-thread-pending.exp (main): Enable for target
        remote.
        * gdb.threads/linux-dp.exp (check_philosopher_stack): Allow
        pid.tid style ptids, instead of just tid.
        * gdb.threads/thread-execl.exp (main): Enable for target remote.
        * gdb.threads/watchpoint-fork.exp (main): Likewise.
        * gdb.trace/report.exp (use_collected_data): Allow pid.tid style
        ptids, instead of just tid.

2015-12-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/list.exp (test_list_forward): Add end of file error
        test.
        (test_repeat_list_command): Add end of file error test.
        (test_list_backwards): Add beginning of file error test.

2015-12-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/list.exp (test_list_invalid_args): New function,
        defined, and called.

2015-12-11  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/list.exp (test_list): Make test names unique.

2015-12-11  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/coremaker2.c: Remove.

2015-12-10  Pedro Alves  <palves@redhat.com>

        * gdb.multi/base.exp: Remove stale "spaces" references.

2015-12-10  Pedro Alves  <palves@redhat.com>

        * gdb.multi/base.exp: Don't use nowarnings.
        * gdb.multi/bkpt-multi-exec.exp: Don't use nowarnings.
        * gdb.multi/hangout.c: Include stdio.h.
        * gdb.multi/hello.c: Include stdlib.h.
        * gdb.multi/multi-arch-exec.c: Include stdlib.h.
        * gdb.multi/multi-arch-exec.exp: Don't use nowarnings.
        * gdb.multi/multi-arch.exp: Don't use nowarnings.

2015-12-10  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.dwarf2/dw2-ranges-base.c: New file.
        * gdb.dwarf2/dw2-ranges-base.exp: New file.
        * lib/dwarf.exp (namespace eval Dwarf): Add new variables to
        support additional line table, and debug ranges generation.
        (Dwarf::ranges): New function, generate .debug_ranges.
        (Dwarf::lines): Support generating simple line table programs.
        (Dwarf::assemble): Initialise new namespace variables.

2015-12-09  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/async.exp (proc test_background): Add case for
        asynchronous execution not supported.

2015-12-09  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.mi/mi-var-display.exp: Add new checks for the zero-hexadecimal
          format and change test names to make them unique.

2015-12-09  Ruslan Kabatsayev  <b7.10110111@gmail.com>
            Pedro Alves  <pedro@redhat.com>

        PR gdb/18702
        Add checking of floatformats setup on x86_64 hosts.
        * gdb.arch/i386-float.S (main): Load bigval and smallval.
        (smallval, bigval): New labels/constants.
        * gdb.arch/i386-float.exp: Use with_test_prefix and test "info
        float" after loading bigval and smallval.

2015-12-07  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/fun_overload_menu.exp: New testcase.
        * gdb.ada/fun_overload_menu/foo.adb: New testcase.

2015-12-04  Josh Stone  <jistone@redhat.com>

        * gdb.base/catch-fork-static.exp: New.

2015-12-03  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/sizeof.c: Don't include stdio.h and
        ../lib/unbuffer_output.c.
        (main): New variable 'size' and 'value'.  Remove printf and
        gdb_unbuffer_output.  Assign return value to size and value.
        * gdb.base/sizeof.exp: Remove the checking to gdb,noinferiorio
        at the beginning.
        (check_sizeof): Check the result by printing variable 'size'.
        (check_valueof): Check the result by printing variable 'value'.

2015-12-01  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/disp-step-syscall.exp: Define syscall instruction
        for aarch64*-*-linux* target.

2015-11-30  Pedro Alves  <palves@redhat.com>

        * gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.

2015-11-30  Pedro Alves  <palves@redhat.com>

        * lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
        Handle non-stop mode vCont replies.

2015-11-30  Pedro Alves  <palves@redhat.com>

        * gdb.base/dprintf-non-stop.exp: Use build_executable instead of
        prepare_for_testing.  Start gdb with "set non-stop on" appended to
        GDBFLAGS.  Lax expected stop output.

2015-11-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-neon.exp: New.
        * gdb.arch/arm-neon.c: New.

2015-11-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.cp/annota2.exp: Rewrite the pattern using multi_line.

2015-11-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.cp/annota2.exp: Allow multiple occurrences of the
        frames-invalid annotation.

2015-11-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.cp/annota2.exp: Use ${frames_invalid}.

2015-11-26  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.threads/names.exp: New file.
        * gdb.threads/names.c: New file.
        * README: Mention gdb,no_thread_names.

2015-11-26  Markus Metzger  <markus.t.metzger@intel.com>

        PR 19297
        * lib/gdb.exp (skip_btrace_pt_tests): Check for a "GDB does not
        support" error.

2015-11-24  Pedro Alves  <palves@redhat.com>

        PR 17539
        * gdb.base/display.exp: Expect displays to be sorted in ascending
        order.  Use multi_line.
        * gdb.base/solib-display.exp: Likewise.

2015-11-24  Pedro Alves  <palves@redhat.com>

        PR 17539
        * gdb.base/display.exp: Expect displays to be sorted in ascending
        order.  Use multi_line.
        * gdb.base/solib-display.exp: Likewise.

2015-11-24  Pedro Alves  <palves@redhat.com>

        PR 17539
        * gdb.base/foll-exec-mode.exp: Adjust to GDB listing inferiors and
        threads in ascending order.
        * gdb.base/foll-fork.exp: Likewise.
        * gdb.base/foll-vfork.exp: Likewise.
        * gdb.base/multi-forks.exp: Likewise.
        * gdb.mi/mi-nonstop.exp: Likewise.
        * gdb.mi/mi-nsintrall.exp: Likewise.
        * gdb.multi/base.exp: Likewise.
        * gdb.multi/multi-arch.exp: Likewise.
        * gdb.python/py-inferior.exp: Likewise.
        * gdb.threads/break-while-running.exp: Likewise.
        * gdb.threads/execl.exp: Likewise.
        * gdb.threads/gcore-thread.exp: Likewise.
        * gdb.threads/info-threads-cur-sal.exp: Likewise.
        * gdb.threads/kill.exp: Likewise.
        * gdb.threads/linux-dp.exp: Likewise.
        * gdb.threads/multiple-step-overs.exp: Likewise.
        * gdb.threads/next-bp-other-thread.exp: Likewise.
        * gdb.threads/step-bg-decr-pc-switch-thread.exp: Likewise.
        * gdb.threads/step-over-lands-on-breakpoint.exp: Likewise.
        * gdb.threads/step-over-trips-on-watchpoint.exp: Likewise.
        * gdb.threads/thread-find.exp: Likewise.
        * gdb.threads/tls.exp: Likewise.
        * lib/mi-support.exp (mi_reverse_list): Delete.
        (mi_check_thread_states): No longer reverse list.

2015-11-24  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-inferior.exp: Use with_test_prefix.  Consistently
        use lowercase.

2015-11-23  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/actions.c: Include trace-common.h.
        (main): Add a location for a fast tracepoint.
        * gdb.trace/save-trace.exp: Set a fast tracepoint in addition to
        the normal tracepoints.
        (gdb_verify_tracepoints): Adjust number of expected tracepoints.

2015-11-23  Simon Marchi  <simon.marchi@ericsson.com>

        * save-trace.exp: Factor out code to these...
        (gdb_save_tracepoints): New.
        (gdb_load_tracepoints): New.
        (do_save_load_test): New.

2015-11-23  Kevin Buettner  <kevinb@redhat.com>

        * gdb.base/asmlabel.exp: New test.
        * gdb.base/asmlabel.c: New test case.

2015-11-23  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/wrong_frame_bt_full-main.c: New file.
        * gdb.base/wrong_frame_bt_full-opaque.c: New file.
        * gdb.base/wrong_frame_bt_full.exp: New file.

2015-11-23  Joel Brobecker  <brobecker@adacore.com>

        * testsuite/gdb.ada/var_rec_arr.exp: Add "ptype a1(1)" test.

2015-11-20  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * gdb.base/callfuncs.exp (fetch_all_registers): Filter out the
        pstate register when comparing registers values in
        sparc64-*-linux-gnu targets to avoid spurious differences.

2015-11-20  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * gdb.arch/sparc-sysstep.c: Include unistd.h for getpid.

2015-11-19  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/nested-subp1.exp: Pass executable, not executable name,
        as type argument to gdb_compile.
        * gdb.base/nested-subp2.exp: Likewise.
        * gdb.base/nested-subp3.exp: Likewise.

2015-11-17  Dominik Vogt  <vogt@linux.vnet.ibm.com>

        * lib/dwarf.exp (_note): Fix left shift of negative value.
        * gdb.trace/trace-condition.exp: Likewise.

2015-11-13  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/call-sc.exp (test_scalar_returns): Remove the
        comments about d10v.
        (test_scalar_returns): Likewise.
        * gdb.base/d10v.ld: Remove.
        * gdb.base/overlays.exp: Remove the target triplet checking for
        d10v-*-*.
        * gdb.base/structs.exp (test_struct_returns): Remove the
        comments about d10v.
        (test_struct_calls): Likewise.

2015-11-13  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/gnu_vector.exp: Check the return value by "p res".
        * gdb.base/gnu_vector.c: Don't include stdio.h.
        (main): Don't print res and call add_some_intvecs.

2015-11-11  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/change-loc.h: include "trace-common.h", remove SYMBOL
        macro.
        (func5): Removed.
        (func4): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/ftrace-lock.c: include "trace-common.h", remove SYMBOL
        macro.
        (func): Removed.
        (thread_function): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/ftrace.c: include "trace-common.h", remove SYMBOL macro.
        (func): Remove.
        (marker): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/pendshr1.c: include "trace-common.h", remove SYMBOL macro.
        (pendfunc1): Remove.
        (pendfunc): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/pendshr2.c: include "trace-common.h", remove SYMBOL macro.
        (foo): Remove.
        (pendfunc2): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/trace-break.c: include "trace-common.h", remove SYMBOL
        macro.
        (func): Remove.
        (marker): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/trace-common.h: New header.
        * gdb.trace/trace-condition.c: include "trace-common.h", remove SYMBOL
        macro.
        (func): Remove.
        (marker): Use FAST_TRACEPOINT_LABEL.
        * gdb.trace/trace-mt.c: include "trace-common.h", remove SYMBOL macro.
        (func): Remove.
        (thread_function): Use FAST_TRACEPOINT_LABEL.

2015-11-10  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.trace/backtrace.exp: Use global fpreg/spreg definition, add $
        in front.
        * gdb.trace/change-loc.exp: Use global pcreg definition.
        * gdb.trace/collection.exp: Use global pcreg/fpreg/spreg definition.
        * gdb.trace/entry-values.exp: Use global spreg definition, add $
        in front.
        * gdb.trace/mi-trace-frame-collected.exp: Use global pcreg definition.
        * gdb.trace/pending.exp: Likewise.
        * gdb.trace/report.exp: Use global pcreg/fpreg/spreg definition.
        * gdb.trace/trace-break.exp: Likewise.
        * gdb.trace/trace-condition.exp: Use global pcreg definition, add $
        in front.
        * gdb.trace/unavailable.exp: Use global pcreg/fpreg/spreg definition.
        * gdb.trace/while-dyn.exp: Use global fpreg definition, add $
        in front.
        * lib/trace-support.exp: Define fpreg, spreg, pcreg variables.

2015-11-09  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/fin_fun_out: New testcase.

2015-11-07  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/data-loc.exp (Dwarf::assemble): Don't hardcode
        value associated with DW_AT_byte_size.
        * gdb.dwarf2/dynarr-ptr.exp (Dwarf::assemble): Don't hardcode
        constants for DW_AT_byte_size, DW_AT_lower_bound, and
        DW_AT_upper_bound.

2015-11-07  Kevin Buettner  <kevinb@redhat.com>

        * lib/gdb (gdb_target_symbol_prefix_flags_asm): New proc.
        (gdb_target_symbol_prefix_flags): Define in terms of _asm
        version.
        * gdb.arch/i386-float.exp, gdb.arch/i386-permbkpt.exp,
        gdb.dwarf2/dw2-canonicalize-type.exp,
        gdb.dwarf2/dw2-compdir-oldgcc.exp, gdb.dwarf2/dw2-minsym-in-cu.exp,
        gdb.dwarf2/dw2-op-stack-value.exp, gdb.dwarf2/dw2-unresolved.exp,
        gdb.dwarf2/fission-reread.exp, gdb.dwarf2/pr13961.exp: Use flags
        provided by gdb_target_symbol_prefix_flags_asm.
        * gdb.dwarf2/dw2-canonicalize-type.S, gdb.dwarf2/dw2-compdir-oldgcc.S,
        testsuite/gdb.dwarf2/dw2-minsym-in-cu.S,
        testsuite/gdb.dwarf2/dw2-unresolved-main.c,
        testsuite/gdb.dwarf2/dw2-unresolved.S, gdb.dwarf2/fission-reread.S,
        gdb.dwarf2/pr13961.S: Define and use SYMBOL macro (and supporting
        macros where needed).  Use this macro for symbols which require
        the prefix provided by SYMBOL_PREFIX.

2015-11-05  Kevin Buettner  <kevinb@redhat.com>

        * lib/gdb.exp (gdb_target_symbol_prefix, gdb_target_symbol):
        New procs.
        * lib/dwarf.exp (_handle_DW_TAG): Handle attribute values,
        representing expressions, of more than one list element.
        * gdb.dwarf2/atomic-type.exp (Dwarf::assemble): Use gdb_target_symbol
        to prepend linker symbol prefix to f.
        * gdb.dwarf2/data-loc.exp (Dwarf::assemble): Likewise, for
        table_1 and table_2.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp (Dwarf::assemble):
        Likewise, for f and g.
        * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble): Likewise,
        for ptr.
        * gdb.dwarf2/dw2-regno-invalid.exp (Dwarf::assemble): Likewise,
        for main.
        * gdb.dwarf2/dynarr-ptr.exp (Dwarf::assemble): Likewise, for
        table_1_ptr and table_2_ptr.

2015-11-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Joel Brobecker  <brobecker@adacore.com>

        * gdb.mi/mi-vla-fortran.exp (evaluate allocated vla): Permit any data.

2015-11-04  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.reverse/s390-mvcle.c: New test.
        * gdb.reverse/s390-mvcle.exp: New file.
        * lib/gdb.exp: Enable reverse tests on s390*-linux.

2015-11-02  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.reverse/readv-reverse.exp: Obvious typo fixed.

2015-11-02  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.reverse/fstatat-reverse.exp: Set breakpoint on marker1 after
        reaching marker2.
        * gdb.reverse/getresuid-reverse.exp: Likewise.
        * gdb.reverse/pipe-reverse.exp: Likewise.
        * gdb.reverse/readv-reverse.exp: Likewise.
        * gdb.reverse/recvmsg-reverse.exp: Likewise.
        * gdb.reverse/time-reverse.exp: Likewise.
        * gdb.reverse/waitpid-reverse.exp: Likewise and add KFAILs.

2015-10-30  Yao Qi  <yao.qi@linaro.org>

        * gdb.threads/wp-replication.c (watch_count_done): Remove.
        (empty_cycle): Remove.
        (main): Don't call empty_cycle.  Don't use watch_count_done.
        * gdb.threads/wp-replication.exp: Don't set breakpoint on
        empty_cycle.  Rewrite the code counting HW watchpoints.

2015-10-30  Marcin Kościelnicki  <koriakin@0x04.net>

        * gdb.reverse/fstatat-reverse.c: New test.
        * gdb.reverse/fstatat-reverse.exp: New file.
        * gdb.reverse/getresuid-reverse.c: New test.
        * gdb.reverse/getresuid-reverse.exp: New file.
        * gdb.reverse/pipe-reverse.c: New test.
        * gdb.reverse/pipe-reverse.exp: New file.
        * gdb.reverse/readv-reverse.c: New test.
        * gdb.reverse/readv-reverse.exp: New file.
        * gdb.reverse/recvmsg-reverse.c: New test.
        * gdb.reverse/recvmsg-reverse.exp: New file.
        * gdb.reverse/time-reverse.c: New test.
        * gdb.reverse/time-reverse.exp: New file.
        * gdb.reverse/waitpid-reverse.c: New test.
        * gdb.reverse/waitpid-reverse.exp: New file.

2015-10-27  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.ada/access_to_packed_array.exp: Fix typos erroring the testfile.

2015-10-26  Doug Evans  <dje@google.com>

        PR symtab/17391
        * lib/dwarf.exp (_location): Add support for DW_OP_regx.
        * gdb.dwarf2/bad-regnum.c: New file.
        * gdb.dwarf2/bad-regnum.exp: New file.

2015-10-26  Doug Evans  <dje@google.com>

        PR python/18938
        * gdb.python/python.exp: Add test for symlink from .py file to .notpy
        file.

2015-10-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile.exp (compile code globalvar): Update expectation
        for a change by "Mention language in compile error message".

2015-10-21  Simon Marchi  <simon.marchi@polymtl.ca>

        PR python/18073
        * gdb.python/py-type.c (C::a_method): New.
        (C::a_const_method): New.
        (C::a_static_method): New.
        (a_function): New.
        * gdb.python/py-type.exp (test_fields): Test getting fields
        from function and method.

2015-10-21  Keven Boell  <keven.boell@intel.com>

        * gdb.fortran/vla-alloc-assoc.exp: New file.
        * gdb.fortran/vla-datatypes.exp: New file.
        * gdb.fortran/vla-datatypes.f90: New file.
        * gdb.fortran/vla-history.exp: New file.
        * gdb.fortran/vla-ptype-sub.exp: New file.
        * gdb.fortran/vla-ptype.exp: New file.
        * gdb.fortran/vla-sizeof.exp: New file.
        * gdb.fortran/vla-sub.f90: New file.
        * gdb.fortran/vla-value-sub-arbitrary.exp: New file.
        * gdb.fortran/vla-value-sub-finish.exp: New file.
        * gdb.fortran/vla-value-sub.exp: New file.
        * gdb.fortran/vla-value.exp: New file.
        * gdb.fortran/vla-ptr-info.exp: New file.
        * gdb.mi/mi-vla-fortran.exp: New file.
        * gdb.mi/vla.f90: New file.

2015-10-21  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/freebpcmd.exp: Use with_timeout_factor instead
        of hardwired timeout value.

2015-10-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.dwarf2/dw2-regno-invalid.exp: New file.
        * lib/dwarf.exp (Dwarf): Add DW_OP_bregx.

2015-10-19  Josh Stone  <jistone@redhat.com>

        * gdb.base/catch-syscall.c: Include <sched.h>.
        (unknown_syscall): New variable.
        (main): Trigger a vfork and an unknown syscall.
        * gdb.base/catch-syscall.exp (vfork_syscalls): New variable.
        (unknown_syscall_number): Likewise.
        (check_call_to_syscall): Accept an optional syscall pattern.
        (check_return_from_syscall): Likewise.
        (check_continue): Likewise.
        (test_catch_syscall_without_args): Check for vfork and ENOSYS.
        (test_catch_syscall_skipping_return): New test toggling off 'catch
        syscall' to step over the syscall return, then toggling back on.
        (test_catch_syscall_mid_vfork): New test turning on 'catch syscall'
        during a PTRACE_EVENT_VFORK stop, in the middle of a vfork syscall.
        (do_syscall_tests): Call test_catch_syscall_without_args and
        test_catch_syscall_mid_vfork.
        (test_catch_syscall_without_args_noxml): Check for vfork and ENOSYS.
        (fill_all_syscalls_numbers): Initialize unknown_syscall_number.

2015-10-19  Andrew Stubbs  <ams@codesourcery.com>

        * gdb.cp/inherit.exp (print g_vB, print g_vC, print g_vD,
        print g_vE): Add new pass patterns.
        * gdb.cp/virtbase.exp (print *this, print *(D *) e): Allow GDB to
        print various symbol names for vptr fields.

2015-10-12  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/dbx.exp (test_func): Remove xfails, update expected
        results.

2015-10-12  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/disp-step-insn-reloc.exp: New test case.

2015-10-12  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (support_displaced_stepping): Return 1 if target
        is aarch64*-*-linux*.

2015-10-12  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/insn-reloc.c (can_relocate_bcond): Rename to ...
        (can_relocate_bcond_true): ... it.
        (can_relocate_bcond_false): New function.
        (foo): Likewise.
        (can_relocate_bl): Likewise.
        (testcases) [__aarch64__]: Add can_relocate_bcond_false and
        can_relocate_bl.

2015-10-12  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.base/nested-addr.c: New file.
        * gdb.base/nested-addr.exp: New testcase.

2015-10-09  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/vdso.c (main): Remove breakpoint markers.
        * gdb.btrace/vdso.exp: Change stepping command to "next" and ignore
        its output.  Ignore the output of "record goto begin" and instead
        check that GDB is replaying.

2015-10-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/a2-run.exp (maybe_exp_continue): New procedure.
        (top level): Use it in the run with no args test.

2015-10-08  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/properties.exp: New file.

2015-10-02  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.dwarf2/staticvirtual.exp: Generalize regexp so it can match
        whether or not address 0x1000 is mapped on the target.

2015-09-30  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-type.exp: Do not run tests if binaries fail to
        build.

2015-09-30  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/tsx.exp: Consider multiple correct outputs in the record
        instruction-history test.

2015-09-28  Doug Evans  <dje@google.com>

        * gdb.base/gcore.c (array_func): Add reference to static_array.

2015-09-25  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.gdb/selftest.exp (do_steps_and_nexts): Adjust expected
        source line.

2015-09-24 Sandra Loosemore <sandra@codesourcery.com>

        * gdb.cp/classes.exp (test_enums): Generalize regexp to allow
        short or char as base type.

2015-09-23 Sandra Loosemore <sandra@codesourcery.com>

        * gdb.cp/var-tag.exp (do_global_tests): Generalize opt_underlying
        to allow any size enum.

2015-09-23  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/array_ptr_renaming.exp: New testcase.
        * gdb.ada/array_ptr_renaming/foo.adb: New file.
        * gdb.ada/array_ptr_renaming/pack.ads: New file.

2015-09-21  Pierre Langlois  <pierre.langlois@arm.com>

        * gdb.trace/ftrace-lock.c: New file.
        * gdb.trace/ftrace-lock.exp: New file.

2015-09-21  Pierre Langlois  <pierre.langlois@arm.com>

        * gdb.arch/insn-reloc.c: New file.
        * gdb.arch/ftrace-insn-reloc.exp: New file.

2015-09-21  Pierre Langlois  <pierre.langlois@arm.com>

        * gdb.trace/change-loc.h (func4) [__aarch64__]: Add a nop
        instruction.
        * gdb.trace/pendshr1.c (pendfunc): Likewise.
        * gdb.trace/pendshr2.c (pendfunc2): Likewise.
        * gdb.trace/range-stepping.c: Likewise.
        * gdb.trace/trace-break.c: Likewise.
        * gdb.trace/trace-mt.c (thread_function): Likewise.
        * gdb.trace/ftrace.c (marker): Likewise.
        * gdb.trace/trace-condition.c (marker): Likewise.
        * gdb.trace/ftrace.exp: Enable ftrace test if is_aarch64_target.
        * gdb.trace/trace-condition.exp: Set pcreg to "\$pc" if
        is_aarch64_target.

2015-09-18  Doug Evans  <xdje42@gmail.com>

        * gdb.dwarf2/dw2-bad-unresolved.c: New file.
        * gdb.dwarf2/dw2-bad-unresolved.exp: New file.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/dso2dso.exp: Don't use directory prefix when setting
        the breakpoint.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.mi/mi-pending.exp: Don't use directory prefix when setting
        the pending breakpoint.  Remove timeout override for "Run till
        MI pending breakpoint on pendfunc3 on thread 2" test.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.mi/mi-cli.exp: Don't require directory prefix in breakpoint
        filename pattern.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.mi/mi-dprintf-pending.exp: Don't require directory prefix
        in breakpoint filename pattern.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/global-var-nested-by-dso.exp: Call gdb_load_shlibs.

2015-09-18  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.linespec/explicit.exp: Check for readline support for
        tab-completion tests.  Fix obvious typo.

2015-09-18  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/multi-thread-step.exp: Test scheduler-locking on, step,
        and replay.

2015-09-18  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/non-stop.c: New.
        * gdb.btrace/non-stop.exp: New.

2015-09-17  Pierre Langlois  <pierre.langlois@arm.com>
            Yao Qi  <yao.qi@linaro.org>

        * gdb.trace/trace-condition.c: New file.
        * gdb.trace/trace-condition.exp: New file.

2015-09-16  Wei-cheng Wang  <cole945@gmail.com>

        * gdb.trace/ftrace.exp: (test_ftrace_condition) New function
        for testing bytecode compilation.

2015-09-16  Pedro Alves  <palves@redhat.com>
            Sandra Loosemore <sandra@codesourcery.com>

        * gdb.threads/non-stop-fair-events.c (timeout): New global.
        (SECONDS): Redefine.
        (main): Call pthread_kill and alarm early.
        * gdb.threads/non-stop-fair-events.exp: Probe displaced stepping
        support.
        (test): If the target can't hardware step and doesn't support
        displaced stepping, increase the timeout.

2015-09-16  Pedro Alves  <palves@redhat.com>

        * gdb.threads/non-stop-fair-events.exp (gdb_test_no_anchor)
        (enable_debug): New procedures.
        (test): Use them.  Bail out if waiting for threads fails.
        (top level): Bail out if a test fails.

2015-09-16  Yao Qi  <yao.qi@linaro.org>

        * gdb.asm/asm-source.exp: Set asm-arch for
        aarch64*-*-* target.
        * gdb.asm/aarch64.inc: New file.

2015-09-15  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/array_of_variable_length.exp: New testcase.
        * gdb.ada/array_of_variable_length/foo.adb: New file.
        * gdb.ada/array_of_variable_length/pck.adb: New file.
        * gdb.ada/array_of_variable_length/pck.ads: New file.

2015-09-15  Doug Evans  <dje@google.com>

        * gdb.base/callfuncs.exp (do_function_calls): Handle clang naming
        of function static local variable.

2015-09-15  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

        * gdb.threads/tls-so_extern.exp: New test file.
        * gdb.threads/tls-so_extern.c: New test file.
        * gdb.threads/tls-so_extern_main.c: New test file.

2015-09-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.opt/solib-intra-step-lib.c: New file.
        * gdb.opt/solib-intra-step-main.c: New file.
        * gdb.opt/solib-intra-step.exp: New file.

2015-09-15  Pedro Alves  <palves@redhat.com>

        * gdb.threads/non-ldr-exc-3.exp (do_test): Use
        gdb_continue_to_breakpoint instead of gdb_test_multiple.

2015-09-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/hook-stop-continue.c: Delete.
        * gdb.base/hook-stop-continue.exp: Delete.
        * gdb.base/hook-stop-frame.c: Delete.
        * gdb.base/hook-stop-frame.exp: Delete.
        * gdb.base/hook-stop.c: New file.
        * gdb.base/hook-stop.exp: New file.

2015-09-14  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/access_to_packed_array.exp: New testcase.
        * gdb.ada/access_to_packed_array/foo.adb: New file.
        * gdb.ada/access_to_packed_array/pack.adb: New file.
        * gdb.ada/access_to_packed_array/pack.ads: New file.

2015-09-14  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/buffer-size.exp: Remove recording with unlimited BTS
        buffer size test.

2015-09-11  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/foll-exec.c: Add copyright header.  Fix
        formatting issues.
        * gdb.base/foll-exec.exp (zap_session): Delete proc.
        (do_exec_tests): Use clean_restart in place of zap_session,
        and for test initialization.  Fix formatting issues.  Use
        fail in place of perror.
        * gdb.base/pie-execl.exp (main): Use 'inferior_spawn_id' in
        an expect statement to match an expression with output from
        the program under debug.
        * gdb.threads/non-ldr-exc-1.exp (do_test, main): Add
        non-stop tests and use save_vars to enable non-stop in GDBFLAGS.
        * gdb.threads/non-ldr-exc-2.exp: Likewise.
        * gdb.threads/non-ldr-exc-3.exp: Likewise.
        * gdb.threads/non-ldr-exc-4.exp: Likewise.

2015-09-09  Doug Evans  <dje@google.com>

        * gdb.python/py-prettyprint.exp: Check result of run_lang_tests.

2015-09-09  Doug Evans  <dje@google.com>

        * gdb.base/pie-execl.exp: Fix result test of build_executable.

2015-09-09  Doug Evans  <dje@google.com>

        * gdb.base/savedregs.exp: Fix typo.

2015-09-09  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-cli.exp: Add CLI finish tests.

2015-09-08  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.threads/hand-call-in-threads.exp: Make sure the thread
        command actually switches threads.  Give up on remaining
        tests if target fails to stop at breakpoint.

2015-09-03  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/funcall_char.exp: New testcase.
        * gdb.ada/funcall_char/foo.adb: New file.

2015-09-01  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/complete.exp: Add "pck.ambiguous_func" to the relevant
        expected outputs.  Add two testcases for completing ambiguous
        functions.
        * gdb.ada/complete/aux_pck.adb: New file.
        * gdb.ada/complete/aux_pck.ads: New file.
        * gdb.ada/complete/foo.adb: Pull Aux_Pck and call the two
        Ambiguous_Func functions.
        * gdb.ada/complete/pck.ads: Add an Ambiguous_Func function.
        * gdb.ada/complete/pck.adb: Likewise.

2015-08-27  Ulrich Weigand  <uweigand@de.ibm.com>

        * lib/cell.exp (skip_cell_tests): Report UNRESOLVED on unexpected
        failures to run the test program under GDB.

2015-08-26  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.compile/compile-ifunc.exp (with_test_prefix): Force language
        to C.

2015-08-26  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/run-after-attach.exp: New test file.
        * gdb.base/run-after-attach.c: New test file.

2015-08-26  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/foll-exec-2.c: New test program.
        * gdb.base/foll-exec-2.exp: New test.

2015-08-25  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.base/nested-subp1.exp: New file.
        * gdb.base/nested-subp1.c: New file.
        * gdb.base/nested-subp2.exp: New file.
        * gdb.base/nested-subp2.c: New file.
        * gdb.base/nested-subp3.exp: New file.
        * gdb.base/nested-subp3.c: New file.

2015-08-24  Pedro Alves  <palves@redhat.com>

        * gdb.server/connect-without-multi-process.c: New file.
        * gdb.server/connect-without-multi-process.exp: New file.

2015-08-24  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.opt/inline-markers.c: Make z int.

2015-08-24  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.opt/inline-markers.c: Make z volatile.

2015-08-24  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.opt/inline-bt.c: New volatile global z.
        * gdb.opt/inline-cmds.c: Likewise.
        * gdb.opt/inline-locals.c: Likewise.
        * gdb.opt/inline-markers.c: New extern global z.
        (marker): Use z.
        (inline_fn): Likewise.

2015-08-24  Pedro Alves  <palves@redhat.com>

        * config/m32r-stub.exp: Remove file.
        * gdb.base/call-ar-st.exp: Remove reference to sparclet.
        * gdb.base/call-rt-st.exp: Likewise.
        * gdb.base/call-strs.exp: Likewise.
        * gdb.base/default.exp: Remove references to h8300-*-hms and
        *-*-udi*.
        * gdb.base/funcargs.exp: Remove reference to sparclet-*-*.

2015-08-24  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/gnu_vector.exp: Try compilation with "-mcpu=native
        -Wno-psabi" if "-mcpu=native" fails.  For the tests with "finish"
        and "return" use KFAIL when GDB can not read/write the vector
        return value.

2015-08-21  Gary Benson <gbenson@redhat.com>

        * gdb.trace/pending.exp: Cope with remote transfer warnings.

2015-08-20  Pedro Alves  <palves@redhat.com>

        * gdb.server/solib-list.exp: No longer expect an interior stop in
        non-stop mode.

2015-08-20  Pedro Alves  <palves@redhat.com>

        * gdb.server/connect-stopped-target.c: New file.
        * gdb.server/connect-stopped-target.exp: New file.

2015-08-20  Pedro Alves  <palves@redhat.com>

        * gdb.dwarf2/comp-unit-lang.exp: New file.
        * gdb.dwarf2/comp-unit-lang.c: New file.

2015-08-20  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/attr_ref_and_charlit.exp: New testcase.
        * gdb.ada/attr_ref_and_charlit/foo.adb: New file.

2015-08-19  Kevin Buettner  <kevinb@redhat.com>

        * gdb.dwarf2/dw2-bad-mips-linkage-name.c: New file.
        * gdb.dwarf2/dw2-bad-mips-linkage-name.exp: New file.

2015-08-18  Doug Evans  <dje@google.com>
            Adrian Sendroiu <adrian.sendroiu@freescale.com>

        * lib/gdb.exp (skip_python_tests_prompt): Renamed from
        skip_python_tests.  New arg prompt_regexp.
        (skip_python_tests): New function.
        * lib/mi-support.exp (mi_skip_python_tests): New function.
        * gdb.python/py-mi-objfile-gdb.py: New file.
        * gdb.python/py-mi-objfile.c: New file.
        * gdb.python/py-mi-objfile.exp: New file.

2015-08-17  Keith Seitz  <keiths@redhat.com>

        * gdb.linespec/explicit.exp: Move strace test from here ...
        * gdb.trace/strace.exp: ... to here.

2015-08-15  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/kill-detach-inferiors-cmd.exp: New test file.
        * gdb.base/kill-detach-inferiors-cmd.c: New test file.

2015-08-14  Doug Evans  <xdje42@gmail.com>

        * gdb.perf/lib/perftest/utils.py (select_file): Kill any existing
        inferior before selecting a new file.

2015-08-14  Doug Evans  <xdje42@gmail.com>

        * gdb.mi/mi-disassemble.exp: Update.
        * gdb.base/disasm-optim.S: New file.
        * gdb.base/disasm-optim.c: New file.
        * gdb.base/disasm-optim.h: New file.
        * gdb.base/disasm-optim.exp: New file.

2015-08-14  Keith Seitz  <keiths@redhat.com>

        * lib/mi-support.exp (mi_make_breakpoint): Add option/handling for
        "evaluated-by".

2015-08-13  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/dso2dso.exp: Improve the testcase's documentation.

2015-08-13  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/fun_renaming.exp: New testcase.
        * gdb.ada/fun_renaming/fun_renaming.adb: New file.
        * gdb.ada/fun_renaming/pack.adb: New file.
        * gdb.ada/fun_renaming/pack.ads: New file.

2015-08-12  Keith Seitz  <keiths@redhat.com>

        * gdb.base/dso2dso.exp: Pass basename of source file in call to
        gdb_get_line_number.

2015-08-12  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/dso2dso-dso2.c, gdb.base/dso2dso-dso2.h,
        gdb.base/dso2dso-dso1.c, gdb.base/dso2dso-dso1.h, gdb.base/dso2dso.c,
        gdb.base/dso2dso.exp: New files.

2015-08-12  Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>
            Keith Seitz  <keiths@redhat.com>

        * gdb.base/checkpoint-ns.exp: Use save_vars to save and restore
        GDBFLAGS.

2015-08-12  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdbhistsize-history.exp
        (test_histsize_history_setting): Use save_vars.
        * gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
        Use save_vars.
        (test_no_truncation_of_unlimited_history_file): Use save_vars.
        * gdb.base/readline.exp: Use save_vars.

2015-08-12  Patrick Palka  <patrick@parcs.ath.cx>

        * lib/gdb.exp (save_vars): New proc.

2015-08-11  Keith Seitz  <keiths@redhat.com>

        * gdb.base/help.exp: Update help_breakpoint_text.

2015-08-11  Keith Seitz  <keiths@redhat.com>

        * gdb.mi/mi-break.exp (test_explicit_breakpoints): New proc.
        (at toplevel): Call test_explicit_breakpoints.
        * gdb.mi/mi-dprintf.exp: Add tests for explicit dprintf
        breakpoints.
        * lib/mi-support.exp (mi_make_breakpoint): Add support for
        breakpoint conditions, "-cond".

2015-08-11  Keith Seitz  <keiths@redhat.com>

        * gdb.linespec/3explicit.c: New file.
        * gdb.linespec/cpexplicit.cc: New file.
        * gdb.linespec/cpexplicit.exp: New file.
        * gdb.linespec/explicit.c: New file.
        * gdb.linespec/explicit.exp: New file.
        * gdb.linespec/explicit2.c: New file.
        * gdb.linespec/ls-errs.exp: Add explicit location tests.
        * lib/gdb.exp (capture_command_output): Regexp-escape `command'
        before using in the matching pattern.
        Clarify that `prefix' is a regular expression.

2015-08-11  Keith Seitz  <keiths@redhat.com>

        * gdb.base/dprintf-pending.exp: Update dprintf "without format"
        test.
        Add tests for missing ",FMT" and ",".

2015-08-10  Doug Evans  <dje@google.com>
            Keith Seitz  <keiths@redhat.com>

        PR gdb/17960
        * gdb.base/completion.exp: Add location completer tests.

2015-08-07  Pedro Alves  <palves@redhat.com>

        * gdb.arch/ppc64-atomic-inst.exp (do_test): New procedure, move
        tests here.
        (top level): Run do_test with and without displaced stepping.

2015-08-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/valgrind-disp-step.c: New file.
        * gdb.base/valgrind-disp-step.exp: New file.

2015-08-07  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-lands-on-breakpoint.c (wait_threads):
        Delete function.
        (main): Add alarm.  Run an infinite loop instead of calling
        wait_threads.
        * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): Change
        comment.
        * gdb.threads/step-over-trips-on-watchpoint.c (wait_threads):
        Delete function.
        (main): Add alarm.  Run an infinite loop instead of calling
        wait_threads.
        * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Change
        comment.

2015-08-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/checkpoint-ns.exp: New file.
        * gdb.base/checkpoint.exp: Pass explicit "checkpoint.c" to
        standard_testfile.

2015-08-07  Markus Metzger  <markus.t.metzger@intel.com>

        * lib/gdb.exp (skip_tsx_tests, skip_btrace_pt_tests): New.
        * gdb.btrace/instruction_history.exp: Update.
        * gdb.btrace/tsx.exp: New.
        * gdb.btrace/tsx.c: New.

2015-08-06  Pedro Alves <palves@redhat.com>

        * gdb.reverse/step-precsave.exp: Use with_timeout_factor to
        increase timeout.
        * gdb.reverse/until-precsave.exp: Bump timeouts.

2015-08-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/valgrind-infcall.exp: Issue a "disconnect".

2015-08-06  Pedro Alves  <palves@redhat.com>

        PR gdb/18749
        * gdb.threads/process-dies-while-handling-bp.c: New file.
        * gdb.threads/process-dies-while-handling-bp.exp: New file.

2015-08-06  Pedro Alves  <palves@redhat.com>

        * gdb.threads/forking-threads-plus-breakpoint.exp: New file.
        * gdb.threads/forking-threads-plus-breakpoint.c: New file.

2015-08-05  Pedro Alves  <palves@redhat.com>

        * gdb.threads/next-while-other-thread-longjmps.c: New file.
        * gdb.threads/next-while-other-thread-longjmps.exp: New file.

2015-08-03  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/bp-permanent.exp: Report test as unsupported if
        the target cannot stop at the permanent breakpoint.

2015-08-03  Doug Evans  <dje@google.com>

        * gdb.perf/single-step.exp (SINGLE_STEP_COUNT): Change to 1000 from
        10000.

2015-08-03  Doug Evans  <dje@google.com>

        * Makefile.in (workers/%.worker, build-perf): New rule.
        (GDB_PERFTEST_MODE): New variable.
        (check-perf): Use it.
        (clean): Clean up gdb.perf parallel build subdirs.
        * lib/build-piece.exp: New file.
        * lib/gdb.exp (make_gdb_parallel_path): New function
        (standard_output_file, standard_temp_file): Call it.
        (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs
        of $GDB_PARALLEL.
        * lib/cache.exp (gdb_do_cache): Call make_gdb_parallel_path.

2015-08-03  Doug Evans  <dje@google.com>

        * gdb.perf/lib/perftest/reporter.py (SUM_FILE_NAME): New global.
        (LOG_FILE_NAME): New global.
        (TextReporter.__init__): Initialize self.txt_sum.
        (TextReporter.report): Add support for multiple data-points.
        Move report to perftest.sum, put raw data in perftest.log.
        (TextReporter.start): Open sum and log files.
        (TextReporter.end): Close sum and log files.
        * gdb.perf/lib/perftest/testresult.py
        (SingleStatisticTestResult.record): Handle multiple data-points.

2015-07-31  Pedro Alves  <palves@redhat.com>

        * gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
        Use spawn_id_get_pid.  Wait for spawn id after eof.  Use
        kill_wait_spawned_process instead of explicit "kill -9".
        * gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
        returning a spawn id instead of a pid.  Use spawn_id_get_pid and
        kill_wait_spawned_process.
        * gdb.base/attach-twice.exp: Likewise.
        * gdb.base/attach.exp: Likewise.
        (do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
        gdb_test_multiple.
        * gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
        returning a spawn id instead of a pid.  Use spawn_id_get_pid and
        kill_wait_spawned_process.
        * gdb.base/valgrind-infcall.exp: Likewise.
        * gdb.multi/multi-attach.exp: Likewise.
        * gdb.python/py-prompt.exp: Likewise.
        * gdb.python/py-sync-interp.exp: Likewise.
        * gdb.server/ext-attach.exp: Likewise.
        * gdb.threads/attach-into-signal.exp (corefunc): Use
        spawn_wait_for_attach, spawn_id_get_pid and
        kill_wait_spawned_process.
        * gdb.threads/attach-many-short-lived-threads.exp: Adjust to
        spawn_wait_for_attach returning a spawn id instead of a pid.  Use
        spawn_id_get_pid and kill_wait_spawned_process.
        * gdb.threads/attach-stopped.exp (corefunc): Use
        spawn_wait_for_attach, spawn_id_get_pid and
        kill_wait_spawned_process.
        * gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
        Use spawn_id_get_pid.  Wait for spawn id after eof.  Use
        kill_wait_spawned_process instead of explicit "kill -9".
        * lib/gdb.exp (can_spawn_for_attach): Adjust comment.
        (kill_wait_spawned_process, spawn_id_get_pid): New procedures.
        (spawn_wait_for_attach): Use spawn instead of exec to spawn
        processes.  Don't map cygwin/windows pids here.  Now returns a
        spawn id list.

2015-07-30  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.cp/var-tag.exp (do_global_tests): Revert broken commit
        4bc4d42859e3b42c79c89295ef39944bdb3e6753 and apply the
        correct patch.

2015-07-30  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.arch/ppc64-symtab-cordic.exp: Restrict to ppc64 targets.

2015-07-30  Sandra Loosemore  <sandra@codesourcery.com>

        Reapply:
        2014-05-21  Mark Wielaard  <mjw@redhat.com>

        * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.

2015-07-30  Pedro Alves  <palves@redhat.com>

        * linux-low.c (handle_extended_wait): Set the child's last
        reported status to TARGET_WAITKIND_STOPPED.

2015-07-30  Pedro Alves  <palves@redhat.com>

        PR threads/18600
        * gdb.threads/fork-plus-threads.exp: Test that "info inferiors"
        only shows inferior 1.

2015-07-30  Simon Marchi  <simon.marchi@ericsson.com>
            Pedro Alves  <palves@redhat.com>

        PR threads/18600
        * gdb.threads/fork-plus-threads.c: New file.
        * gdb.threads/fork-plus-threads.exp: New file.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/batch-preserve-term-settings.exp
        (test_terminal_settings_preserved_after_cli_exit): Use
        send_quit_command.

2015-07-29  Pedro Alves  <palves@redhat.com>
            Don Breazeal  <donb@codesourcery.com>

        * gdb.base/multi-forks.exp (continue_to_exit_bp_loc): Expect
        output from both inferior_spawn_id and gdb_spawn_id.

2015-07-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.threads/attach-into-signal.exp (corefunc): Use
        with_test_prefix on nested loops, uniquefying the test messages.

2015-07-29  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.python/py-objfile.exp: Fix typo that snuck in from my last
        commit.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/batch-preserve-term-settings.exp (send_quit_command):
        New proc.
        (test_terminal_settings_preserved_after_sigterm): New test.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/batch-preserve-term-settings.exp
        (test_terminal_settings_preserved_after_cli_exit): New test.

2015-07-29  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/batch-preserve-term-settings.exp: Remove top-level
        manipulation of saved_gdbflags.
        (test_terminal_settings_preserved): Remove global declaration of
        the unused variable pagination_prompt.  Remove manipulation of
        saved_gdbflags.  Use a local variable EXTRA_GDBFLAGS instead of
        GDBFLAGS.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * boards/gdbserver-base.exp: Don't set gdb,noinferiorio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Revert back to checking gdb,noinferiorio
        at the top.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-ar-st.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/call-rt-st.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/call-strs.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/call-strs.exp: Adjust to step over the
        gdb_unbuffer_output call.
        * gdb.base/catch-gdb-caused-signals.c: Include
        "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/dprintf.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/ending-run.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/run.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/shlib-call.exp: Adjust to step over the
        gdb_unbuffer_output call.
        * gdb.base/shmain.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/sizeof.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.
        * gdb.base/varargs.c: Include "../lib/unbuffer_output.c".
        (main): Rename to ...
        (test): ... this.
        (main): Reimplement.
        * gdb.base/varargs.exp: Run to test instead of to main.
        * gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-dprintf.exp (mi_expect_dprintf): New procedure,
        factore out from mi_continue_dprintf.  For call-style dprintfs,
        expect dprintf output out of $inferior_spawn_id.
        (mi_continue_dprintf): Use mi_expect_dprintf.
        * gdb.mi/mi-dprintf.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * lib/mi-support.exp (mi_inferior_spawn_id): Delete.
        (default_mi_gdb_start): Set inferior_spawn_id instead of
        mi_inferior_spawn_id.  If $inferior_spawn_id is not set, set it to
        gdb_spawn_id.
        (mi_gdb_test): Always expect inferior output from both
        $inferior_spawn_id and $gdb_spawn_id.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/selftest.exp (test_with_self): Update comment.  Use
        send_inferior and $inferior_spawn_id.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/complaints.exp (test_initial_complaints)
        (test_serial_complaints, test_short_complaints): Use
        gdb_test_stdio.
        (test_empty_complaint): Handle $inferior_spawn_id !=
        $gdb_spawn_id.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/varargs.exp: Use gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/shlib-call.exp: Use gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/ending-run.exp: Use gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-rt-st.exp (print_struct_call): Split "result"
        parameter into two new parameters, "inf_result" and "gdb_result".
        Expect inferior output and gdb output from $inferior_spawn_id and
        $gdb_spawn_id, respectively.  Adjust all callers.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-ar-st.exp: Use gdb_test_stdio+multi_line instead
        of gdb_test_sequence.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/a2-run.exp (saw_usage, saw_exit_wrapper)
        (saw_spurious_output): Expect inferior output from
        $inferior_spawn_id.  Use gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/dprintf.exp: Use standard_testfile.  Change
        prepare_for_testing call.
        (srcfile): Don't set.
        (restart): New procedure.
        (test_dprintf): New procecure, use to continue over dprintfs.
        (test_call, test_agent): New procedures, tests moved here.
        Restart gdb and recreate dprintfs.  Adjust expected output.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/catch-gdb-caused-signals.exp: Use gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-strs.exp: Use gdb_test_stdio instead of gdb_test.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/sizeof.exp (check_sizeof, check_valueof): Use
        gdb_test_stdio.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_test_stdio): New procedure.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/restore.exp (restore_tests): Use gdb_continue_to_end.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/call-signal-resume.exp: Remove check for
        gdb,noinferiorio.  Don't expect "no signal".  Use gdb_test.
        * gdb.base/unwindonsignal.exp: Likewise.
        * gdb.base/call-signals.c (gen_signal): Remove printf call.
        * gdb.base/unwindonsignal.c (gen_signal): Likewise.

2015-07-29  Pedro Alves  <palves@redhat.com>

        * gdb.base/siginfo-addr.c (pass): New function.
        (handler): Call it iff si_addr is correct.
        * gdb.base/siginfo-addr.exp: Remove gdb_skip_stdio_test check.
        Set a breakpoint at "pass" and continue to it.

2015-07-28  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.python/py-objfile.exp: Make some tests have unique names.
        * gdb.python/py-pp-registration.exp: Likewise.

2015-07-28  Pedro Alves  <palves@redhat.com>

        * gdb.server/server-exec-info.exp: Issue a "disconnect".

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-pending.c (thread_func): Replace return with return NULL.

2015-07-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-watch.exp (test_watchpoint_triggering): Remove xfail.

2015-07-27  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdb-sigterm-2.exp: New test.

2015-07-25  Doug Evans  <xdje42@gmail.com>

        Revert:
        * Makefile.in (check/%.exp): Pass directory for GDB_PARALLEL.
        (workers/%.worker, build-perf): New rule.
        (GDB_PERFTEST_MODE): New variable.
        (check-perf): Use it.
        (clean): Clean up gdb.perf parallel build subdirs.
        * lib/build-piece.exp: New file.
        * lib/cache.exp (gdb_do_cache): Include $GDB_PARALLEL in path name.
        * lib/gdb.exp (standard_output_file): Include $GDB_PARALLEL in path
        name.
        (standard_temp_file): Ditto.
        (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs
        of $GDB_PARALLEL.

2015-07-24  Doug Evans  <dje@google.com>

        * gdb.perf/lib/perftest/utils.py: New file.
        * gdb.perf/gm-hello.cc: New file.
        * gdb.perf/gm-pervasive-typedef.cc: New file.
        * gdb.perf/gm-pervasive-typedef.h: New file.
        * gdb.perf/gm-std.cc: New file.
        * gdb.perf/gm-std.h: New file.
        * gdb.perf/gm-use-cerr.cc: New file.
        * gdb.perf/gm-utils.h: New file.
        * gdb.perf/gmonster-null-lookup.py: New file.
        * gdb.perf/gmonster-pervasive-typedef.py: New file.
        * gdb.perf/gmonster-print-cerr.py: New file.
        * gdb.perf/gmonster-ptype-string.py: New file.
        * gdb.perf/gmonster-runto-main.py: New file.
        * gdb.perf/gmonster-select-file.py: New file.
        * gdb.perf/gmonster1-null-lookup.exp: New file.
        * gdb.perf/gmonster1-pervasive-typedef.exp: New file.
        * gdb.perf/gmonster1-print-cerr.exp: New file.
        * gdb.perf/gmonster1-ptype-string.exp: New file.
        * gdb.perf/gmonster1-runto-main.exp: New file.
        * gdb.perf/gmonster1-select-file.exp: New file.
        * gdb.perf/gmonster1.cc: New file.
        * gdb.perf/gmonster1.exp: New file.
        * gdb.perf/gmonster2-null-lookup.exp: New file.
        * gdb.perf/gmonster2-pervasive-typedef.exp: New file.
        * gdb.perf/gmonster2-print-cerr.exp: New file.
        * gdb.perf/gmonster2-ptype-string.exp: New file.
        * gdb.perf/gmonster2-runto-main.exp: New file.
        * gdb.perf/gmonster2-select-file.exp: New file.
        * gdb.perf/gmonster2.cc: New file.
        * gdb.perf/gmonster2.exp: New file.

2015-07-24  Doug Evans  <dje@google.com>

        * gdb.perf/README: New file.
        * lib/perftest.exp (tcl_string_list_to_python_list): New function.
        * lib/gen-perf-test.exp: New file.

2015-07-24  Doug Evans  <dje@google.com>

        * lib/perftest.exp (PerfTest::compile): Unconditionally call body.
        (PerfTest::startup): New function.
        (PerfTest::run): Return result of calling body.
        (PerfTest::assemble): Rewrite.
        * gdb.perf/backtrace.exp (PerfTest::assemble): Update function result.
        * gdb.perf/disassemble.exp (PerfTest::assemble): Ditto.
        * gdb.perf/single-step.exp (PerfTest::assemble): Ditto.
        * gdb.perf/skip-prologue.exp (PerfTest::assemble): Ditto.
        * gdb.perf/solib.exp (PerfTest::assemble): Ditto.

2015-07-24  Doug Evans  <dje@google.com>

        * lib/gdb.exp (clean_restart): Make executable optional.

2015-07-24  Doug Evans  <dje@google.com>

        * gdb.base/watchpoint.exp (test_complex_watchpoint): Remove
        compiler_info references.
        * gdb.cp/temargs.exp: Ditto.
        * lib/gdb.exp: Unset compiler_info instead of setting to "unknown".
        (get_compiler_info): Early exit if already computed.  Set compiler_info
        to "unknown" if there was a problem.
        (test_compiler_info): Add function comment.  Call get_compiler_info.

2015-07-24  Doug Evans  <dje@google.com>

        * Makefile.in (check/%.exp): Pass directory for GDB_PARALLEL.
        (workers/%.worker, build-perf): New rule.
        (GDB_PERFTEST_MODE): New variable.
        (check-perf): Use it.
        (clean): Clean up gdb.perf parallel build subdirs.
        * lib/build-piece.exp: New file.
        * lib/cache.exp (gdb_do_cache): Include $GDB_PARALLEL in path name.
        * lib/gdb.exp (standard_output_file): Include $GDB_PARALLEL in path
        name.
        (standard_temp_file): Ditto.
        (GDB_PARALLEL handling): Make outputs,temp,cache directories as subdirs
        of $GDB_PARALLEL.

2015-07-24  Doug Evans  <dje@google.com>

        * lib/future.exp (gdb_default_target_compile): New option
        "early_flags".
        * lib/gdb.exp (gdb_compile): Undo debian's change in default of
        --as-needed.

2015-07-24  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/catch-syscall.exp: Call gdb_exit before
        gdb_skip_xml_test.

2015-07-24  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-events.exp: Accept output between the stop event
        and the prompt.
        * gdb.python/py-evsignal.exp: Likewise.
        * gdb.python/py-evthreads.exp: Likewise.

2015-07-24  Pedro Alves  <palves@redhat.com>

        PR gdb/18717
        * gdb.threads/non-ldr-exit.c: New file.
        * gdb.threads/non-ldr-exit.exp: New file.

2015-07-24  Yao Qi  <yao.qi@linaro.org>

        * gdb.server/ext-wrapper.exp: Test --wrapper option when
        restarting process.

2015-07-24  Yao Qi  <yao.qi@linaro.org>

        * gdb.server/ext-restart.exp: New file.

2015-07-24  Yao Qi  <yao.qi@linaro.org>

        * lib/gdbserver-support.exp (gdbserver_start_extended): Add
        argument options.
        * gdb.server/ext-wrapper.exp: New file.

2015-07-23  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw2-dummy-cu.S: New file.
        * gdb.dwarf2/dw2-dummy-cu.exp: New file.

2015-07-23  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/var_arr_typedef.exp: New testcase.
        * gdb.ada/var_arr_typedef/pack.adb: New file.
        * gdb.ada/var_arr_typedef/pack.ads: New file.
        * gdb.ada/var_arr_typedef/var_arr_typedef.adb: New file.

2015-07-20  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/info_exc.exp: Adjust "info exceptions" expected output.

2015-07-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/i386-biarch-core.exp: Replace istarget
        by "complete set gnutarget". Remove expectation for the "core-file"
        command.

2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Revert the previous commit:
        Tests for validate symbol file using build-id.

2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com

        Tests for validate symbol file using build-id.
        * gdb.base/solib-mismatch-lib.c: New file.
        * gdb.base/solib-mismatch-libmod.c: New file.
        * gdb.base/solib-mismatch.c: New file.
        * gdb.base/solib-mismatch.exp: New file.

2015-07-15  Sandra Loosemore  <sandra@codesourcery.com>

        * gdb.base/sigaltstack.exp (finish_test): Add kfail for
        nios2-*-linux*.
        * gdb.base/sigbpt.exp (stepi_out): Likewise.
        * gdb.base/siginfo.exp: Likewise.
        * gdb.base/sigstep.exp (advance, advancei): Likewise.

2015-07-15  Pierre Langlois  <pierre.langlois@arm.com>

        * gdb.base/range-stepping.exp (gdb_range_stepping_enabled):
        Move it to ...
        * lib/range-stepping-support.exp (gdb_range_stepping_enabled):
        ... here.
        * gdb.trace/range-stepping.exp: Check that the target supports
        range stepping.

2015-07-14  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/i386-biarch-core.exp: Fix comment typo.

2015-07-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/killed-outside.exp: New file.
        * gdb.base/killed-outside.c: New file.

2015-07-10  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.asm/asm-source.exp (f at main): Stop at gdbasm_enter.
        (n at main): New.
        * gdb.asm/asmsrc1.s: Add comment "mark: main enter".

2015-07-10  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/gnu_vector.exp: On x86 and x86_64 targets, skip the
        infcall tests instead of setting up for KFAIL.

2015-07-10  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/record_goto-step.exp: New.

2015-07-08  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR compile/18484
        * gdb.compile/compile.c (struct struct_type): Add volatile to
        selffield's type.
        * gdb.compile/compile.exp
        (compile code struct_object.selffield = &struct_object): Skip further
        struct_object tests if this one xfails.

2015-07-08  Robert O'Callahan  <robert@ocallahan.org>

        PR exp/18617
        * gdb.trace/ax.exp: Add test.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/aarch64-atomic-inst.exp: Check is_aarch64_target
        instead of istarget "aarch64*-*-*".
        * gdb.arch/aarch64-fp.exp: Likewise.
        * gdb.base/float.exp: Likewise.
        * gdb.reverse/aarch64.exp: Likewise.
        * lib/gdb.exp (is_aarch64_target): New proc.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (is_aarch32_target): New proc.
        * gdb.arch/arm-bl-branch-dest.exp: Check is_aarch32_target
        instead of "istarget "arm*-*-*"".
        * gdb.arch/arm-disp-step.exp: Likewise.
        * gdb.arch/thumb-bx-pc.exp: Likewise.
        * gdb.arch/thumb-prologue.exp: Likewise.
        * gdb.arch/thumb-singlestep.exp: Likewise.
        * gdb.base/disp-step-syscall.exp: Likewise.
        * gdb.base/float.exp: Likewise.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch):
        Set arch1, arch2, syscall1_name, syscall2_name and syscall_number.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.multi/multi-arch-exec.exp: Set march1 and march2 to "" if target
        is aarch64.  If target is aarch64, set compiler=${ARM_CC_FOR_TARGET}
        if it exists.
        * gdb.multi/multi-arch.exp: Likewise.

2015-07-07  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-lazy-string.exp: Add missing parentheses to
        print.

2015-07-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/thumb-singlestep.exp: Do one more single step.

2015-06-30  Martin Galvan  <martin.galvan@tallertechnologies.com>

        * lib/gdb.exp (test_class_help): Remove the unneeded escaping of
        '[' and ']' characters.

2015-06-30  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/demangle.exp: Sync tests from libiberty testsuite.

2015-06-29  Pedro Alves  <palves@redhat.com>

        PR threads/18127
        * gdb.threads/hand-call-new-thread.c: New file.
        * gdb.threads/hand-call-new-thread.c: New file.

2015-06-26  Keith Seitz  <keiths@redhat.com>
            Doug Evans  <dje@google.com>

        PR 16253
        * gdb.cp/var-tag-2.cc: New file.
        * gdb.cp/var-tag-3.cc: New file.
        * gdb.cp/var-tag-4.cc: New file.
        * gdb.cp/var-tag.cc: New file.
        * gdb.cp/var-tag.exp: New file.

2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/history-duplicates.exp: New test.

2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/completion.exp: Test the completion of the "focus"
        command.

2015-06-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/amd64-prologue-skip.S: New file.
        * gdb.arch/amd64-prologue-skip.exp: New file.

2015-06-25  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-prettyprint.exp (run_lang_tests): Add
        is_address_zero_readable check.

2015-06-24  Peter Bergner  <bergner@vnet.ibm.com>

        * gdb.arch/powerpc-power.exp <rfebb>: Fixup test results.
        * gdb.arch/powerpc-power.s <rfebb>: Likewise.

2015-06-24  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (supports_get_siginfo_type): Return 1 for all
        linux targets.

2015-06-24  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (supports_get_siginfo_type): New proc.
        * gdb.base/siginfo-obj.exp: Invoke supports_get_siginfo_type.
        * gdb.base/siginfo-thread.exp: Likewise.

2015-06-22  Yao Qi  <yao.qi@linaro.org>

        * boards/remote-gdbserver-on-localhost.exp: Add comments.

2015-06-22  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (skip_hw_breakpoint_tests): Return 0 for target
        aarch64*-*-*.
        (skip_hw_watchpoint_tests): Likewise.

2015-06-18  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdbinit-history.exp: Test the interaction between
        setting GDBHISTSIZE and setting the history size via .gdbinit.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

        PR gdb/16999
        * gdb.base/gdbhistsize-history.exp: New test.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdbinit-history.exp: Replace occurrences of HISTSIZE
        with GDBHISTSIZE.
        * gdb.base/readline.exp: Likewise.

2015-06-17  Yao Qi  <yao.qi@linaro.org>

        * lib/gdb.exp (get_build_id): Move braces and "else" to the same
        line.

2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdbinit-history.exp: Add test case to check that
        an unlimited history file does not get truncated on exit.

2015-06-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/gnu_vector.c: Include stdarg.h and stdio.h.
        (VECTOR): New macro.  Use it...
        (int4, uint4, char4, float4, int2, longlong2, float2, double2):
        ...for these typedefs.
        (int8, char1, int1, double1): New typedefs.
        (struct just_int2, struct two_int2): New structures.
        (add_some_intvecs, add_many_charvecs, add_various_floatvecs)
        (add_structvecs, add_singlevecs): New functions.
        (main): Call add_some_intvecs twice.
        * gdb.base/gnu_vector.exp: Drop GCC version check; just attempt
        the compile and exit upon failure.  Try compiling for the "native"
        architecture.  Test inferior function calls with vector arguments
        and vector return value handling with "finish" and "return".

2015-06-10  Jon Turney  <jon.turney@dronecode.org.uk>

        * gdb.base/sepdebug.exp: Add EXEEXT where needed.
        * lib/gdb.exp (get_build_id): Teach how to extract build-id from a
        PE file.
        * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump.

2015-06-12  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        PR breakpoints/16465
        * gdb.mi/mi-dprintf-pending.c: New file.
        * gdb.mi/mi-dprintf-pending.exp: New test.
        * gdb.mi/mi-dprintf-pendshr.c: New file.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
            Mircea Gherzan  <mircea.gherzan@intel.com>

        * gdb.arch/i386-mpx-map.c: New file.
        * gdb.arch/i386-mpx-map.exp: New File.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.arch/i386-mpx.c (have_mpx): Indentation fixed.
        * gdb.arch/i386-mpx.exp: Indentation fixed.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.arch/i386-mpx.c: Added final return to the have_mpx
        function and improved indentation.
        * gdb.arch/i386-mpx.exp: Exchanging gdb_send and gdb_expect for
        gdb_test_multiple. Added additional tests to skip the test.

2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * gdb.arch/i386-avx512.c: Change path in include file.
        * gdb.arch/i386-avx512.exp: Change include dir path
        compilation flag.
        * gdb.arch/i386-mpx.c: Change path in include file.
        * gdb.arch/i386-mpx.exp: Change include dir path compilation
        flag.

2015-06-04  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile-print.exp (compile print *vararray@3)
        (compile print *vararrayp@3): Change xfail to kfail compile/18489.

2015-06-03  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile.exp (keep jit in memory): Rename to ...
        (do not keep jit in memory): ... this.
        (expect 5): Change it to ...
        (expect no 5): ... this.

2015-06-02  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/15564
        * gdb.mi/mi-detach.exp: New file.

2015-06-01  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR symtab/18392
        * gdb.arch/amd64-tailcall-self.S: New file.
        * gdb.arch/amd64-tailcall-self.c: New file.
        * gdb.arch/amd64-tailcall-self.exp: New file.

2015-05-28  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/foll-vfork.exp (main): Disable exec-dependent
        tests for remote targets by checking is_target_gdbserver.

2015-05-27  Doug Evans  <dje@google.com>

        * gdb.dwarf2/opaque-type-lookup-2.c: New file.
        * gdb.dwarf2/opaque-type-lookup.c: New file.
        * gdb.dwarf2/opaque-type-lookup.exp: New file.

2015-05-26  Doug Evans  <dje@google.com>

        * gdb.cp/iostream.cc: New file.
        * gdb.cp/iostream.exp: New file.

2015-05-26  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw2-op-call.exp: Update.
        * gdb.dwarf2/dw4-sig-types.exp: Update.
        * gdb.dwarf2/implptr.exp: Update.
        * gdb.mi/mi-cmd-param-changed.exp: Update.

2015-05-26  Doug Evans  <dje@google.com>

        * gdb.python/py-lazy-string.c: New file.
        * gdb.python/py-lazy-string.exp: New file.
        * gdb.python/py-prettyprint.c (lazystring) <len>: New member.
        (main): Update.  Add estring3.
        * gdb.python/py-prettyprint.exp: Add tests for strings at address 0.
        * gdb.python/py-prettyprint.py (pp_ls): Handle length.

2015-05-26  Omair Javaid  <omair.javaid@linaro.org>
            Yao Qi  <yao.qi@linaro.org>

        * gdb.reverse/aarch64.c: New.
        * gdb.reverse/aarch64.exp: New.

2015-05-26  Omair Javaid  <omair.javaid@linaro.org>

        * lib/gdb.exp (supports_process_record): Return true for
        aarch64*-linux*.
        (supports_reverse): Likewise.

2015-05-22  Patrick Palka  <patrick@parcs.ath.cx>

        * gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
        Use with_test_prefix.

2015-05-21  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/completion.exp: Add test for completion of layout
        names.

2015-05-20  Andrew Burgess  <andrew.burgess@embecosm.com>

        * lib/gdb.exp (skip_tui_tests): New proc.
        * gdb.base/tui-layout.exp: Check skip_tui_tests.

2015-05-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/gdbinit-history.exp (test_gdbinit_history_setting):
        Save the whole env array instead of just HOME.  Unset HISTSIZE in
        the environment while testing.  Restore whole environment
        afterwards.

2015-05-16  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-ports.c: New file.
        * gdb.guile/scm-ports.exp: Add memory port tests.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile-print.c: New file.
        * gdb.compile/compile-print.exp: New file.

2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile-ops.exp: Cast param to void.
        * gdb.compile/compile.exp: Complete type for _gdb_expr.
        (compile code struct_object.selffield = &struct_object): Add xfail.

2015-05-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/arr_enum_with_gap: New testcase.

2015-05-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/byte_packed_arr: New testcase.

2015-05-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pckd_neg: New testcase.

2015-05-13  Patrick Palka  <patrick@parcs.ath.cx>

        PR gdb/17820
        * gdb.base/gdbinit-history.exp: New test.
        * gdb.base/gdbinit-history/unlimited/.gdbinit: New file.
        * gdb.base/gdbinit-history/zero/.gdbinit: New file.

2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-xmethods.cc: Enhance test case.
        * gdb.python/py-xmethods.exp: New tests.
        * gdb.python/py-xmethods.py (A_indexoper): New xmethod worker
        function.
        (B_indexoper): Likewise.
        (global_dm_list) : Add new xmethod worker functions.

2015-05-08  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/coredump-filter.exp: Correctly unset
        "coredump_var_addr" array.

2015-05-08  Pedro Alves  <palves@redhat.com>

        * gdb.server/non-existing-program.exp: Unset spawn_id.

2015-05-08  Siva Chandra Reddy  <sivachandra@google.com>

        PR python/18291
        * gdb.python/py-xmethods.exp: Add tests.

2015-05-08  Yao Qi  <yao.qi@linaro.org>

        PR gdb/18208
        * gdb.base/coredump-filter.c (set_coredump_filter): New function.
        * gdb.base/coredump-filter.exp (do_save_core): Call inferior
        function set_coredump_filter, and remove remote_exec call.
        Remove argument ipid.  Callers update.
        (top level): Don't get inferior's PID.

2015-05-08  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/watch_thread_num.exp: Skip test on targets without
        access watchpoints.

2015-05-06  Pedro Alves  <palves@redhat.com>

        PR server/18081
        * gdb.server/non-existing-program.exp: New file.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/out_of_line_in_inlined: New testcase.

2015-05-05  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/var_rec_arr: New testcase.

2015-04-30  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/break-idempotent.exp: If
        skip_hw_watchpoint_multi_tests returns true, skip the tests
        on "rwatch" and "awatch".

2015-04-30  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/relativedebug.exp: Invoke gdb command
        "info sharedlibrary", and if libc.so doesn't have debug info,
        skip the test.

2015-04-29  Doug Evans  <dje@google.com>

        * gdb.python/py-xmethods.exp: Add ptype tests.
        * gdb.python/py-xmethods.py (E_method_char_worker): Add
        get_result_type method.

2015-04-29  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/watch-bitfields.exp: Switch to software watchpoints if
        the target does not support hardware watchpoints.

2015-04-29  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/break-always.exp: Abort testing if writing to memory
        causes an error.

2015-04-28  Doug Evans  <dje@google.com>

        * gdb.python/py-pp-maint.py: Move "replace" testing to ...
        * gdb.python/py-pp-registration.exp: ... here.  New file.
        * gdb.python/py-pp-registration.c: New file.
        * gdb.python/py-pp-registration.py: New file.

2015-04-28  Doug Evans  <dje@google.com>

        * gdb.python/py-bad-printers.c: New file.
        * gdb.python/py-bad-printers.py: New file.
        * gdb.python/py-bad-printers.exp: New file.

2015-04-28  Sasha Smundak  <asmundak@google.com>

        * gdb.python/py-type.exp: New test.

2015-04-28  Andy Wingo  <wingo@igalia.com>

        * gdb.python/py-parameter.exp:
        * gdb.guile/scm-parameter.exp: Escape the path that we are
        matching against, as it might contain characters that are special
        to regular expressions.

2015-04-27  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/rec_comp: New testcase.

2015-04-26  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/coredump-filter.exp: Clear variable "coredump_var_addr"
        before using it.

2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.base/dump.exp: Add *.verilog files to all_files list.  Add
        new tests for verilog output.

2015-04-24  Yao Qi  <yao.qi@linaro.org>

        * boards/remote-gdbserver-on-localhost.exp: New file.

2015-04-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Use an indirect spawn id list holding
        $inferior_spawn_id instead of $inferior_spawn_id directly.  On
        "end of file", remove $inferior_spawn_id from the indirect list.

2015-04-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Rename saw_eof to saw_end_of_file.

2015-04-23  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_test_multiple): Match eof/full_buffer/timeout
        on $any_spawn_id instead of only on $gdb_spawn_id.

2015-04-21  Pierre Muller  <muller@sourceware.org>

        PR pascal/17815
        * lib/pascal.exp (gpc_compile): Add new option "class".
        (fpc_compile): Likewise.
        * gdb.pascal/case-insensitive-symbols.pas: New file.
        * gdb.pascal/case-insensitive-symbols.exp: New file.

2015-04-20  Gary Benson <gbenson@redhat.com>

        * gdb.base/attach.exp: Fix three extended remote failures.

2015-04-17  Gary Benson <gbenson@redhat.com>

        * gdb.server/server-exec-info.exp: Inhibit GDB from accessing
        the main executable over the remote protocol.

2015-04-16  Pedro Alves  <palves@redhat.com>

        * boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
        a new gdbserver if gdbserver_reconnect_p is set.

2015-04-16  Pedro Alves  <palves@redhat.com>

        * lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
        is set, don't exit gdbserver.

2015-04-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
        appropriate .insn, such that an older assembler can be used.
        * gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
        the z/Architecture instruction set on 31-bit targets as well.

2015-04-16  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.go/handcall.exp: Remove all logic related to the first
        breakpoint and rely on go_runto_main instead.
        * gdb.go/strings.exp: Likewise.
        * gdb.go/unsafe.exp: Likewise.
        * gdb.go/hello.exp: Likewise.  Also rename the remaining
        breakpoint marker to "breakpoint 1".
        * gdb.go/handcall.go: Remove comment "set breakpoint 1 here".
        * gdb.go/strings.go: Likewise.
        * gdb.go/unsafe.go: Likewise.
        * gdb.go/hello.go: Likewise.  Also remove the second occurrence of
        "set breakpoint 2 here" and rename the remaining breakpoint marker
        to "breakpoint 1".

2015-04-15  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function
        if itertools.imap is not present.
        * gdb.python/py-objfile.exp: Add parentheses.
        * gdb.python/py-type.exp: Same.
        * gdb.python/py-unwind-maint.py: Same.

2015-04-15  Yao Qi  <yao.qi@linaro.org>

        * gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead
        of ":$ptr_size" and set its form explicitly.

2015-04-15  Pedro Alves  <palves@redhat.com>
            Yao Qi  <yao.qi@linaro.org>

        * gdb.base/watch-bitfields.exp (test_watch_location): Increase
        timeout by factor of 4.
        (test_regular_watch): Likewise.
        * gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
        * gdb.reverse/sigall-reverse.exp: Likewise.
        * gdb.reverse/until-precsave.exp: Likewise.
        * lib/gdb.exp (with_timeout_factor): New proc.
        (gdb_expect): Move some code to ...
        (get_largest_timeout): ... here.  New procedure.

2015-04-14  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/bp-permanent.exp (test): Reinstate correct test message.

2015-04-13  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/bp-permanent.exp (test): Handle the case of being unable
        to write to the .text section.

2015-04-13  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.base/coredump-filter.exp: Restrict test to Linux systems only.
        Handle the case of targets that do not provide PID information.

2015-04-13  Yao Qi  <yao.qi@linaro.org>

        * lib/gdbserver-support.exp (gdb_exit): Catch exception
        and use expect instead of gdb_expect.

2015-04-13  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/coredump-filter.exp: Rename variable "addr" to
        "coredump_var_addr" to avoid naming conflict with other testcases.

2015-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Use
        gdb_test_sequence and gdb_assert.

2015-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Use
        test messages that don't include the breakpoint address.

2015-04-10  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): Return
        false for some offset and width combinations which aren't
        supported by linux kernel.

2015-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): New
        procedure, factored out from ...
        (top level): ... here.  Add "set displaced-stepping" testing axis.
        * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): New
        parameter "displaced".  Use it.
        (top level): Use foreach and add "set displaced-stepping" testing
        axis.

2015-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-trips-on-watchpoint.c (child_function):
        Remove comment.
        * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Find
        both the address of the instruction that triggers the watchpoint
        and the address of the instruction immediately after, and use
        those addresses for the test.  Fix comment.

2015-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/sigstep.exp (breakpoint_to_handler)
        (breakpoint_to_handler_entry): New parameter 'displaced'.  Use it.
        Test "backtrace" in handler.
        (breakpoint_over_handler): New parameter 'displaced'.  Use it.
        (top level): Add new "displaced" test axis to
        breakpoint_to_handler, breakpoint_to_handler_entry and
        breakpoint_over_handler.

2015-04-10  Pedro Alves  <palves@redhat.com>

        PR gdb/18216
        * gdb.threads/multiple-step-overs.exp: Remove expected eof.

2015-04-10  Yao Qi  <yao.qi@linaro.org>

        * gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc.
        (test_add_rn_pc): New function.
        * gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc.
        (top level): Invoke test_add_rn_pc.

2015-04-10  Pedro Alves  <palves@redhat.com>

        PR gdb/13858
        * gdb.base/step-over-no-symbols.exp: New file.

2015-04-09  Andy Wingo  <wingo@igalia.com>

        * gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled
        after the Python tests.

2015-04-08  Keith Seitz  <keiths@redhat.com>

        PR python/16699
        * gdb.python/py-completion.exp: New tests for completion.
        * gdb.python/py-completion.py (CompleteLimit1): New class.
        (CompleteLimit2): Likewise.
        (CompleteLimit3): Likewise.
        (CompleteLimit4): Likewise.
        (CompleteLimit5): Likewise.
        (CompleteLimit6): Likewise.
        (CompleteLimit7): Likewise.

2015-04-08  Pedro Alves  <palves@redhat.com>

        PR gdb/18214
        PR gdb/18216
        * gdb.threads/multiple-step-overs.c (sigusr1_handler): New
        function.
        (main): Install it as SIGUSR1 handler.
        * gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix'
        parameter.  Always use "setup" as prefix.  Toggle "set
        displaced-stepping" off/on depending on global.  Don't switch to
        thread 1 here.
        (top level): Add displaced stepping "off/on" test axis.  Update
        "setup" calls.  Wrap each subtest with with_test_prefix.  Test
        continuing with a queued signal in each thread.

2015-04-08  Pedro Alves  <palves@redhat.com>

        * gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd.
        * gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd.  Use
        gdb_breakpoint instead of gdb_test that doesn't expect anything.
        Return early if running to main fails.
        * gdb.trace/while-stepping.exp: Likewise.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id !=
        $gdb_spawn_id.  Use send_inferior and $inferior_spawn_id to
        interact with inferior program.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (inferior_spawn_id): New global.
        (gdb_test_multiple): Handle "-i".  Reset the spawn id to GDB's
        spawn id after processing the user code.
        (default_gdb_start): Set inferior_spawn_id.
        (send_inferior): New procedure.
        * lib/gdbserver-support.exp (gdbserver_start): Set
        inferior_spawn_id.
        (close_gdbserver, gdb_exit): Unset inferior_spawn_id.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
        * lib/gdbserver-support.exp (gdbserver_start): Make
        $server_spawn_id global.
        (gdbserver_start): Don't wait for gdbserver's spawn id with
        expect_background.
        (close_gdbserver): New procedure.
        (gdb_exit): Rename the default version and reimplement.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_test_multiple): When processing an argument,
        append the substituted item, not the original item.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Use gdb_test_multiple instead of
        gdb_expect.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * gdb.base/interrupt.exp: Don't handle the case of the inferior
        output appearing once only.

2015-04-07  Pedro Alves  <palves@redhat.com>

        * gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
        that doesn't expect anything.  Return early if running to main
        fails.

2015-04-07  Yao Qi  <yao.qi@linaro.org>

        * gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
        (child_function): Call alarm.
        (main): Move call to alarm into the loop.
        * gdb.threads/non-stop-fair-events.exp: Build program with
        -DTIMEOUT=$timeout.

2015-04-06  Doug Evans  <xdje42@gmail.com>

        * lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
        Fix dest parameter to board_info.
        (fpc_compile): Ditto.
        (gdb_compile_pascal): Rename dest arg to destfile.

2015-04-03  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/funcall_ref.exp: New file.
        * gdb.ada/funcall_ref/foo.adb: New file.

2015-04-02  Yao Qi  <yao.qi@linaro.org>

        * gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
        is remote.

2015-04-02  Gary Benson <gbenson@redhat.com>

        * gdb.base/break-probes.exp: Cope with "target:" sysroot.

2015-04-01  Sasha Smundak  <asmundak@google.com>

        * gdb.python/py-unwind-maint.c: New file.
        * gdb.python/py-unwind-maint.exp: New test.
        * gdb.python/py-unwind-maint.py: New file.
        * gdb.python/py-unwind.c: New file.
        * gdb.python/py-unwind.exp: New test.
        * gdb.python/py-unwind.py: New test.

2015-04-01  Pedro Alves  <palves@redhat.com>

        * gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
        to fail instead of non-existent $test.

2015-04-01  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
        GDBFLAGS if not empty.

2015-04-01  Pierre-Marie de Rodat  <derodat@adacore.com>

        * gdb.ada/complete.exp: Remove "multi_line".
        * gdb.ada/info_exc.exp: Remove "multi_line".
        * gdb.ada/packed_tagged.exp: Remove "multi_line".
        * gdb.ada/ptype_field.exp: Remove "multi_line".
        * gdb.ada/sym_print_name.exp: Remove "multi_line".
        * gdb.ada/tagged.exp: Remove "multi_line".
        * gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
        [multi_line ...]
        * gdb.btrace/delta.exp: Likewise.
        * gdb.btrace/exception.exp: Likewise.
        * gdb.btrace/function_call_history.exp: Likewise.
        * gdb.btrace/instruction_history.exp: Likewise.
        * gdb.btrace/nohist.exp: Likewise.
        * gdb.btrace/record_goto.exp: Likewise.
        * gdb.btrace/segv.exp: Likewise.
        * gdb.btrace/stepi.exp: Likewise.
        * gdb.btrace/tailcall.exp: Likewise.
        * gdb.btrace/unknown_functions.exp: Likewise.
        * gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
        * lib/gdb.exp: Add the "multi_line" helper.

2015-04-01  Pedro Alves  <palves@redhat.com>

        * gdb.threads/tid-reuse.c: New file.
        * gdb.threads/tid-reuse.exp: New file.

2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR corefiles/16092
        * gdb.base/coredump-filter.c: New file.
        * gdb.base/coredump-filter.exp: Likewise.

2015-03-27  Petr Machata  <pmachata@redhat.com>

        * lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset.
        (Dwarf::_line_count, Dwarf::_line_saw_file): New variables.
        (Dwarf::assemble): Initialize them.
        (Dwarf::lines): New function.

2015-03-26  Jon Turney  <jon.turney@dronecode.org.uk>

        * lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
        SYMBOL_PREFIX for x86_64-*-cygwin.

2015-03-26  Andy Wingo  <wingo@igalia.com>

        PR symtab/18148
        * gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
        const_value but not a location.
        * gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
        location defined in non-main CUs are visible.

2015-03-26  Yao Qi  <yao.qi@linaro.org>

        PR testsuite/18139
        * gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
        Add a line number entry for the same line.
        * gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
        Add a line number entry for the same line.

2015-03-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.linespec/break-asm-file0.s (func2): Use nop instead of
        .int 0.
        (func): Likewise.  Add .Lfunc_1 label.
        Use .Lfunc_1 label.
        * gdb.linespec/break-asm-file1.s (func3): Use nop instead of
        .int 0.
        (func): Likewise.
        Use .Lfunc_1 label.

2015-03-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
        Call gdb_compile instead to compile each .s files without debug
        information.

2015-03-26  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/savedregs.exp (process_saved_regs): Make
        "Saved registers:" optional in the pattern.

2015-03-25  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/next.exp: Merged into step.exp.
        * gdb.btrace/finish.exp: Merged into step.exp.
        * gdb.btrace/nexti.exp: Merged into stepi.exp.
        * gdb.btrace/step.exp: Use record_goto.c as test file.  Avoid using
        "record goto" and checking the exact replay position.
        * gdb.btrace/stepi.exp: Choose test file based on target.  Do not
        check for "Recording format" in "info record" output.
        * gdb.btrace/record_goto.exp: Choose test file based on target.
        * gdb.btrace/x86-record_goto.S: Renamed into ...
        * gdb.btrace/x86_64-record_goto.S: ... this.
        * gdb.btrace/i686-record_goto.S: New.
        * gdb.btrace/x86-tailcall.S: Renamed into ...
        * gdb.btrace/x86_64-tailcall.S: ... this.
        * gdb.btrace/i686-tailcall.S: New.
        * gdb.btrace/x86-tailcall.c: Renamed into ...
        * gdb.btrace/tailcall.c: ... this.  Split "return ++answer" into two
        separate statements.  Update test.
        * gdb.btrace/delta.exp: Use record_goto.c as test file.
        * gdb.btrace/gcore.exp: Use record_goto.c as test file.
        * gdb.btrace/nohist.exp: Use record_goto.c as test file.
        * gdb.btrace/tailcall.exp: Choose test file based on target.
        * gdb.btrace/Makefile.in: Remove next, finish, and nexti.

2015-03-25  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/exception.exp: Increase BTS buffer size.

2015-03-24  Pedro Alves  <palves@redhat.com>

        * gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".

2015-03-24  Pedro Alves  <palves@redhat.com>

        * gdb.threads/schedlock.exp (test_step): No longer expect that
        "set scheduler-locking step" with "next" over a function call runs
        threads unlocked.

2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.mi/mi-pending.exp: Fix output of breakpoint test.

2015-03-24  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        PR breakpoints/16466
        * gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
        * gdb.mi/mi-pending.c (thread_func): New function.
        (int main): Add threading support required.
        * gdb.mi/mi-pending.exp: Add tests for this issue.
        * gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
        (pendfunc2): Remove stdio dependency.
        * gdb.mi/mi-pendshr2.c: New file.

2015-03-23  Keith Seitz  <keiths@redhat.com>

        * gdb.linespec/keywords.c: New file.
        * gdb.linespec/keywords.exp: New file.

2015-03-23  Keith Seitz  <keiths@redhat.com>

        PR gdb/18021
        * gdb.dwarf2/staticvirtual.exp: New test.

2015-03-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
        * README: Remove HP-UX and gdb.hp.
        (configuration):
        * configure: Regenerate.
        * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
        gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
        gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
        gdb.hp/gdb.defects/Makefile.
        * gdb.hp/Makefile.in: File deleted.
        * gdb.hp/gdb.aCC/Makefile.in: File deleted.
        * gdb.hp/gdb.aCC/optimize.c: File deleted.
        * gdb.hp/gdb.aCC/optimize.exp: File deleted.
        * gdb.hp/gdb.aCC/run.c: File deleted.
        * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
        * gdb.hp/gdb.base-hp/Makefile.in: File deleted.
        * gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
        * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
        * gdb.hp/gdb.base-hp/dollar.c: File deleted.
        * gdb.hp/gdb.base-hp/dollar.exp: File deleted.
        * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
        * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
        * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
        * gdb.hp/gdb.base-hp/pxdb.c: File deleted.
        * gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
        * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
        * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
        * gdb.hp/gdb.base-hp/reg.exp: File deleted.
        * gdb.hp/gdb.base-hp/reg.s: File deleted.
        * gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
        * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
        * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
        * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
        * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
        * gdb.hp/gdb.compat/Makefile.in: File deleted.
        * gdb.hp/gdb.compat/average.c: File deleted.
        * gdb.hp/gdb.compat/sum.c: File deleted.
        * gdb.hp/gdb.compat/xdb.c: File deleted.
        * gdb.hp/gdb.compat/xdb0.c: File deleted.
        * gdb.hp/gdb.compat/xdb0.h: File deleted.
        * gdb.hp/gdb.compat/xdb1.c: File deleted.
        * gdb.hp/gdb.compat/xdb1.exp: File deleted.
        * gdb.hp/gdb.compat/xdb2.exp: File deleted.
        * gdb.hp/gdb.compat/xdb3.exp: File deleted.
        * gdb.hp/gdb.defects/Makefile.in: File deleted.
        * gdb.hp/gdb.defects/bs14602.c: File deleted.
        * gdb.hp/gdb.defects/bs14602.exp: File deleted.
        * gdb.hp/gdb.defects/solib-d.c: File deleted.
        * gdb.hp/gdb.defects/solib-d.exp: File deleted.
        * gdb.hp/gdb.defects/solib-d1.c: File deleted.
        * gdb.hp/gdb.defects/solib-d2.c: File deleted.
        * gdb.hp/gdb.objdbg/Makefile.in: File deleted.
        * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
        * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
        * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
        * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
        * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
        * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
        * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
        * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
        * gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
        * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
        * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
        * gdb.hp/tools/odump: File deleted.

2015-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.threads/continue-pending-status.exp (saw_thread_2)
        (saw_thread_3): New globals.
        (top level): Increment them when an event for the corresponding
        thread is seen.
        (no thread starvation): New test.

2015-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.threads/continue-pending-status.c: New file.
        * gdb.threads/continue-pending-status.exp: New file.

2015-03-18  Pedro Alves  <palves@redhat.com>

        * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
        Use gdb_is_target_remote instead of is_remote.  Use
        gdb_test_multiple instead of gdb_expect.  Exit early if
        gdb_test_multiple hits its internal matches.  Tighten stepi tests
        expected output.  Fail on exit with any signal, instead of just
        SIGILL.

2015-03-18  Yao Qi  <yao.qi@linaro.org>

        PR tdep/18107
        * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
        variable.
        * gdb.base/catch-syscall.exp: Don't skip it on
        aarch64*-*-linux* target.  Remove elements in all_syscalls.
        (test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
        target.
        (setup_all_syscalls): New proc.

2015-03-16  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
        (top level): Skip tests if valid_addr_p returns false for
        $cmd1 or $cmd2.

2015-03-11  Andy Wingo  <wingo@igalia.com>

        * gdb.guile/scm-objfile.exp: Add objfile-progspace test.

2015-03-11  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.exp: Fix typo in comments.

2015-03-11  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.exp: Skip it on HP-UX target.

2015-03-09  Pedro Alves  <palves@redhat.com>

        * dg-extract-results.py: Delete.

2015-03-09  Pedro Alves  <palves@redhat.com>

        Merge dg-extract-results.sh from GCC upstream (r218843).

        2014-12-17  Sergio Durigan Junior  <sergiodj@redhat.com>
                * dg-extract-results.sh: Use --text with grep to avoid issues with
                binary files.  Fall back to cat -v, if that doesn't work.

2015-03-05  Pedro Alves  <palves@redhat.com>

        * gdb.base/bp-permanent.exp: Tighten "next over setup" regex.

2015-03-04  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/mi-support.exp (mi_expect_interrupt): Accept
        alternative event for when in all-stop mode.

2015-03-04  Pedro Alves  <palves@redhat.com>

        * gdb.threads/thread-specific-bp.exp: Delete "info threads" test.

2015-03-04  Mark Kettenis  <kettenis@gnu.org>

        * gdb.base/foll-fork.exp: Enable on *-*-openbsd*.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
        regexps for GDB's current line display, accept a hex address
        preceding the line number.

2015-03-04  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
        the 'arch1' variable for "s390*-linux*" targets.

2015-03-04  Pedro Alves  <palves@redhat.com>

        * gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
        (main): Pass missing retval argument to pthread_join call.

2015-03-02  Pedro Alves  <palves@redhat.com>

        * gdb.threads/thread-execl.exp (do_test): Handle non-stop.
        (top level): Call do_test with non-stop as well.

2015-03-02  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
        -1.

2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.arch/s390-vregs.exp: New test.
        * gdb.arch/s390-vregs.S: New file.

2015-02-27  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
        call to catch_command_errors.
        * gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
        catch_command_errors.

2015-02-27  Pedro Alves  <palves@redhat.com>

        * gdb.gdb/complaints.exp (test_initial_complaints): Also accept
        "true" for boolean result.
        * gdb.gdb/selftest.exp (test_with_self): Also accept full
        prototype of main.

2015-02-27  Pedro Alves  <palves@redhat.com>

        * lib/unbuffer_output.c: New file.
        * gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
        (main): Call gdb_unbuffer_output.

2015-02-27  Yao Qi  <yao.qi@linaro.org>

        * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
        target.

2015-02-26  Doug Evans  <dje@google.com>

        * gdb.cp/class2.cc (Dbase, D): New classes.
        (main): New local delta.
        * gdb.cp/class2.exp: Test printing delta.
        * gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes.
        (dynbar): New global.
        * gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile-ifunc.c: New file.
        * gdb.compile/compile-ifunc.exp: New file.

2015-02-26  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        * gdb.base/structs.exp: Check for correct struct on finish.

2015-02-26  Yao Qi  <yao.qi@linaro.org>

        * lib/dwarf.exp (function_range): Adjust pattern when $func_length
        is zero.

2015-02-26  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/cordic.ko.bz2: New file.
        * gdb.arch/cordic.ko.debug.bz2: New file.
        * gdb.arch/ppc64-symtab-cordic.exp: New file.

2015-02-25  Yao Qi  <yao.qi@linaro.org>

        * gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
        aarch64*-*-* target.

2015-02-23  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (delete_breakpoints): Rewrite using
        gdb_test_multiple.

2015-02-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/info-os.c: Include stdlib.h.

2015-02-22  Doug Evans  <xdje42@gmail.com>

        PR symtab/17855
        * gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
        is read after symbols have been re-read.
        * gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
        * gdb.ada/exec_changed/second.adb (Second): Ditto.

2015-02-21  Doug Evans  <dje@google.com>

        * gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.

2015-02-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR corefiles/17808
        * gdb.arch/i386-biarch-core.core.bz2: New file.
        * gdb.arch/i386-biarch-core.exp: New file.

2015-02-21  Pedro Alves  <palves@redhat.com>

        * gdb.threads/multi-create-ns-info-thr.exp: Return early if
        runto_main fails.

2015-02-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/solib-corrupted.exp: Expect "stap" as first column of
        info probes.

2015-02-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/multi-create-ns-info-thr.exp: New file.

2015-02-20  Pedro Alves  <palves@redhat.com>

        * gdb.trace/no-attach-trace.exp: Don't run to main.  Do
        clean_restart before gdb_target_supports_trace.

2015-02-20  Pedro Alves  <palves@redhat.com>

        PR threads/18006
        * gdb.threads/clone-thread_db.c: New file.
        * gdb.threads/clone-thread_db.exp: New file.

2015-02-19  Antoine Tremblay  <antoine.tremblay@ericsson.com>

        PR breakpoints/16812
        * gdb.base/catch-gdb-caused-signals.c: New file.
        * gdb.base/catch-gdb-caused-signals.exp: New file.

2015-02-18  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * configure: Regenerated.
        * configure.ac: Use GDB_AC_TRANSFORM.
        * aclocal.m4: sinclude ../transform.m4.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * lib/dtrace.exp: New file.
        * gdb.base/dtrace-probe.exp: Likewise.
        * gdb.base/dtrace-probe.d: Likewise.
        * gdb.base/dtrace-probe.c: Likewise.
        * lib/pdtrace.in: Likewise.
        * configure.ac: Output variables with the transformed names of
        the strip, readelf, as and nm tools.  AC_SUBST lib/pdtrace.in.
        * configure: Regenerated.

2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
        expected message when trying to access $_probe_* convenience
        variables while not on a probe.

2015-02-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.python/py-framefilter.exp (pagination quit - *): New tests.

2015-02-11  Pedro Alves  <pedro@codesourcery.com>

        * gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
        * gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.

2015-02-10  Doug Evans  <xdje42@gmail.com>

        * lib/gdb.exp (gdb_load): Always return a result.

2015-02-10  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-sigtrap.c: New file.
        * gdb.threads/signal-sigtrap.exp: New file.

2015-02-10  Antoine Tremblay <antoine.tremblay@ericsson.com>

        * gdb.trace/no-attach-trace.c: New file.
        * gdb.trace/no-attach-trace.exp: New file.

2015-02-09  Mark Wielaard  <mjw@redhat.com>

        * gdb.dwarf2/atomic.c: New file.
        * gdb.dwarf2/atomic-type.exp: Likewise.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/buffer-size.exp: Update "info record" output.
        * gdb.btrace/delta.exp: Update "info record" output.
        * gdb.btrace/enable.exp: Update "info record" output.
        * gdb.btrace/finish.exp: Update "info record" output.
        * gdb.btrace/instruction_history.exp: Update "info record" output.
        * gdb.btrace/next.exp: Update "info record" output.
        * gdb.btrace/nexti.exp: Update "info record" output.
        * gdb.btrace/step.exp: Update "info record" output.
        * gdb.btrace/stepi.exp: Update "info record" output.
        * gdb.btrace/nohist.exp: Update "info record" output.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/buffer-size: New.

2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/delta.exp: Update "info record" output.
        * gdb.btrace/enable.exp: Update "info record" output.
        * gdb.btrace/finish.exp: Update "info record" output.
        * gdb.btrace/instruction_history.exp: Update "info record" output.
        * gdb.btrace/next.exp: Update "info record" output.
        * gdb.btrace/nexti.exp: Update "info record" output.
        * gdb.btrace/step.exp: Update "info record" output.
        * gdb.btrace/stepi.exp: Update "info record" output.
        * gdb.btrace/nohist.exp: Update "info record" output.

2015-02-06  Simon Marchi  <simon.marchi@ericsson.com>

        PR gdb/15678
        * gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.

2015-02-06  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
        macro.
        (seconds_left, again): New globals.
        (main): Wait seconds_left in a 1-second sleep loop instead of
        sleeping 180 seconds.  If 'again' is set, reset the seconds
        counter.
        * gdb.threads/attach-many-short-lived-threads.exp (test): Set
        'again' in the inferior before detaching.  Print the seconds left.
        (options): New global.
        (top level): Build program with -DTIMEOUT=$timeout.

2015-02-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
        determine how many seconds to pass to 'alarm'.
        * gdb.base/gdb-sigterm.exp (top level): Build program with
        -DTIMEOUT=$timeout.
        (do_test): Return success/failure indication.  Add more verbose
        logging.  Don't fail if 200 single steps are seen.  Instead, fail
        when the test times out.
        (passes): New global.
        (top level): Break the testing loop if testing fails on any
        iteration.  Use gdb_assert.

2015-02-04  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/info-os.c (shmid, semid, msqid): Make variables static
        and initialize them.
        (ipc_cleanup): New function.
        (main): Don't declare shmid, semid, and msqid.  Add a call to
        atexit so that we call ipc_cleanup on exit.

2015-02-04  Pedro Alves  <palves@redhat.com>

        * boards/native-extended-gdbserver.exp: Remove any target variant
        specifications from the board name before clearing the isremote
        flag from board_info.

2015-01-31  Doug Evans  <xdje42@gmail.com>

        * gdb.base/maint.exp <maint print type argc>: Update expected output.

2015-01-31  Gary Benson <gbenson@redhat.com>

        * gdb.base/completion.exp: Disable completion limiting for
        existing tests.  Add new tests to check completion limiting.
        * gdb.linespec/ls-errs.exp: Disable completion limiting.

2015-01-31  Doug Evans  <xdje42@gmail.com>

        * gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12.

2015-01-31  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-section-script.c: Add duplicate inlined section script
        entries.  Duplicate file section script entries.
        * gdb.guile/scm-section-script.exp: Add tests for duplicate entries,
        inlined entries.  Add test for safe-path rejection.
        * gdb.python/py-section-script.c: Add duplicate inlined section script
        entries.  Duplicate file section script entries.
        * gdb.python/py-section-script.exp: Add tests for duplicate entries,
        inlined entries.  Add test for safe-path rejection.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/disc_arr_bound: New testcase.

2015-01-29  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_var_array: New testcase.

2015-01-27  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Add tests for objfile.username.
        Add test for objfile.filename, objfile.username after objfile
        has been unloaded.

2015-01-26  Joel Brobecker  <brobecker@adacore.com>

        * gdb.python/py-lookup-type.exp (test_lookup_type): Change
        the second test to print the name attribute of value
        returned by the call to gdb.lookup_type, and adjust
        the expected output accordingly.

2015-01-25  Mark Wielaard  <mjw@redhat.com>

        * gdb.arch/i386-bp_permanent.c (standard): New declaration.
        * gdb.base/disp-step-fork.c: Include unistd.h.
        * gdb.base/siginfo-obj.c: Include stdio.h.
        * gdb.base/siginfo-thread.c: Likewise.
        * gdb.mi/non-stop.c: Include unistd.h.
        * gdb.mi/nsthrexec.c: Include stdio.h.
        * gdb.mi/pthreads.c: Include unistd.h.
        * gdb.modula2/unbounded1.c (main): Declare returns int.
        * gdb.reverse/consecutive-reverse.c: Likewise.
        * gdb.threads/create-fail.c: Include unistd.h.
        * gdb.threads/killed.c: Likewise.
        * gdb.threads/linux-dp.c: Likewise.
        * gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
        * gdb.threads/non-ldr-exc-2.c: Likewise.
        * gdb.threads/non-ldr-exc-3.c: Likewise.
        * gdb.threads/non-ldr-exc-4.c: Likewise.
        * gdb.threads/pthreads.c: Include unistd.h.
        (main): Declare returns int.
        * gdb.threads/tls-main.c (foo): New declaration.
        * gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.

2015-01-23  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
        * gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.

2015-01-15  Mark Wielaard  <mjw@redhat.com>

        * gdb.base/noreturn-return.c: New file.
        * gdb.base/noreturn-return.exp: New file.
        * gdb.base/noreturn-finish.c: New file.
        * gdb.base/noreturn-finish.exp: New file.

2015-01-23  Pedro Alves  <palves@redhat.com>

        * gdb.threads/continue-pending-after-query.c: New file.
        * gdb.threads/continue-pending-after-query.exp: New file.

2015-01-22  Anders Granlund  <anders.granlund@ericsson.com>
            Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
        * gdb.base/valgrind-db-attach.exp: Same.
        * gdb.base/valgrind-infcall.exp: Same.
        * lib/mi-support.exp (default_mi_gdb_start): Same.
        * lib/prompt.exp (default_prompt_gdb_start): Same.
        * lib/gdb.exp (default_gdb_spawn): Same.
        (gdb_interact): New.


2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.compile/compile.exp (pointer to jit function): New test.

2015-01-17  Wei-cheng Wang  <cole945@gmail.com>

        * lib/gdb.exp (supports_process_record): Return true for
        powerpc*-*-linux*.
        (supports_reverse): Likewise.

2015-01-15  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
        instead of checking whether the target board is remote and
        use spawn_wait_for_attach instead of exec/sleep.
        * gdb.base/attach-twice.exp: Likewise.

2015-01-15  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/var_arr_attrs: New testcase.

2015-01-14  Pedro Alves  <palves@redhat.com>
            Joel Brobecker  <brobecker@adacore.com>

        PR gdb/17525
        * gdb.base/bp-cmds-execution-x-script.c: New file.
        * gdb.base/bp-cmds-execution-x-script.exp: New file.
        * gdb.base/bp-cmds-execution-x-script.gdb: New file.

2015-01-14  Pedro Alves  <palves@redhat.com>

        PR cli/17828
        * gdb.base/batch-preserve-term-settings.c: New file.
        * gdb.base/batch-preserve-term-settings.exp: New file.

2015-01-13  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
        binary.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

        * Makefile.in (clean mostlyclean): Do not delete *.py.

2015-01-13  Joel Brobecker  <brobecker@adacore.com>

        * gdb.python/py-lookup-type.exp: New file.

2015-01-12  Pedro Alves  <palves@redhat.com>

        * gdb.python/py-prompt.exp: When the board can't spawn for attach,
        restore GDBFLAGS before returning.

2015-01-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
        is_amd64_regs_target and is_x86_like_target.

2015-01-11  Doug Evans  <xdje42@gmail.com>

        * lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
        is given without an explicit form.
        * gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
        attributes.
        * gdb.dwarf/corrupt.exp: Ditto.
        * gdb.dwarf2/enum-type.exp: Ditto.
        * gdb.trace/entry-values.exp: Ditto.
        * gdb.trace/unavailable-dwarf-piece.exp: Ditto.

2015-01-11  Doug Evans  <xdje42@gmail.com>

        PR gdb/15830
        * gdb.base/maint.exp: Remove references to "maint demangle".
        * gdb.cp/demangle.exp: Update.  "maint demangle" -> "demangle".
        Add tests for explicitly specifying language to demangle.
        * gdb.dlang/demangle.exp: Ditto.

2015-01-09  Pedro Alves  <palves@redhat.com>

        * gdb.threads/non-stop-fair-events.c: New file.
        * gdb.threads/non-stop-fair-events.exp: New file.

2015-01-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
        the global scope.  Set a breakpoint after all threads are started
        rather than stepping over two source lines.  Expect the prompt.
        * gdb.base/watch_thread_num.c (threads_started_barrier): New
        global.
        (NUM): Now 15.
        (main): Use threads_started_barrier to wait for all threads to
        start.  Main thread no longer calls thread_function.  Exit after
        180 seconds.
        (loop): New function.
        (thread_function): Wait on threads_started_barrier barrier.  Call
        'loop' at each iteration.
        * gdb.base/watch_thread_num.exp: Continue to breakpoint after all
        threads have started, instead of hardcoding number of "next"
        steps.  Use an access watchpoint instead of a write watchpoint.

2015-01-09  Pedro Alves  <palves@redhat.com>

        * gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
        (thread_func): Wait on barrier.
        (main): Wait for all threads to start before stopping GDB.
        * gdb.threads/siginfo-threads.c (threads_started_barrier): New
        global.
        (thread1_func, thread2_func): Wait on barrier.
        (main): Wait for all threads to start before stopping GDB.
        * gdb.threads/watchthreads-reorder.c (threads_started_barrier):
        New global.
        (thread1_func, thread2_func): Wait on barrier.
        (main): Wait for all threads to start before stopping GDB.

2015-01-09  Pedro Alves  <palves@redhat.com>

        * gdb.threads/attach-many-short-lived-threads.c: New file.
        * gdb.threads/attach-many-short-lived-threads.exp: New file.

2014-01-09  Pedro Alves  <palves@redhat.com>

        * gdb.threads/fork-thread-pending.exp: Switch to the main thread
        instead of to thread 2.
        * gdb.threads/signal-command-multiple-signals-pending.c (main):
        Add barrier around each pthread_create call instead of around all
        calls.
        * gdb.threads/signal-command-multiple-signals-pending.exp (test):
        Set a break on thread_function and have the child threads hit it
        one at at a time.

2015-01-09  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (can_spawn_for_attach): New procedure.
        (spawn_wait_for_attach): Error out if can_spawn_for_attach returns
        false.
        * gdb.base/attach.exp: Use can_spawn_for_attach instead of
        checking whether the target board is remote.
        * gdb.multi/multi-attach.exp: Likewise.
        * gdb.python/py-sync-interp.exp: Likewise.
        * gdb.server/ext-attach.exp: Likewise.
        * gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
        tests that need to attach, instead of checking whether the target
        board is remote at the top of the file.

2015-01-08  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/entry-values.exp: Set call_insn for MIPS target.

2015-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix testcase compilation.
        * gdb.arch/i386-avx512.exp (comp_flags): Remove /common.

2015-01-06  Joel Brobecker  <brobecker@adacore.com>

        * gdb.python/py-type.exp: Add a couple test about empty
        array creation, and negative-length array creation.

2015-01-02  Doug Evans  <xdje42@gmail.com>

        * gdb.cp/nsalias.exp: Fix output of external/declaration flags.

2015-01-02  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc.

2014-12-29  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/entry-values.exp: Update comments.  Rename variable
        bar_call_foo to returned_from_foo.

2014-12-20  Mihail-Marian Nistor  <mihail.nistor@freescale.com>

        PR gdb/17394
        * gdb.linespec/break-asm-file.c: New file.
        * gdb.linespec/break-asm-file.exp: New file.
        * gdb.linespec/break-asm-file0.s: New file.
        * gdb.linespec/break-asm-file1.s: New file.

2014-12-18  Nigel Stephens  <nigel@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.base/float.exp: Handle the new output from "info float" on
        MIPS targets.

2014-12-17  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix MinGW compilation.
        * gdb.compile/compile-ops.exp: Update untested message if
        !skip_compile_feature_tests.
        * gdb.compile/compile-setjmp.exp: Likewise.
        * gdb.compile/compile-tls.exp: Likewise.
        * gdb.compile/compile.exp: Likewise.
        * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
        supported on this host".

2014-12-16  Doug Evans  <xdje42@gmail.com>

        * boards/stabs.exp: New file.

2014-12-16  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * gdb.base/completion.exp: Adjust to format changes of "maint
        print user-registers".

2014-12-16  Catalin Udma  <catalin.udma@freescale.com>

        PR server/17457
        * gdb.arch/aarch64-fp.c: New file.
        * gdb.arch/aarch64-fp.exp: New file.

2014-12-15  Sergio Durigan Junior  <sergiodj@redhat.com>

        Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
        r210637, r210913, r211666, r215400, r215817).

        2014-05-08  Richard Sandiford  <rdsandiford@googlemail.com>
                * dg-extract-results.py: New file.
                * dg-extract-results.sh: Use it if the environment seems
                suitable.

        2014-05-20  Richard Sandiford  <rdsandiford@googlemail.com>

                * dg-extract-results.py (parse_run): Handle warnings that
                are printed before a test harness is run.

        2014-05-25  Richard Sandiford  <rdsandiford@googlemail.com>

                * dg-extract-results.py (Named): Remove __cmp__ method.
                (output_variation): Use a key to sort variation.harnesses.

        2014-06-14  Richard Sandiford  <rdsandiford@googlemail.com>

                * dg-extract-results.py: For Python 3, force sys.stdout to
                handle surrogate escape sequences.
                (safe_open): New function.
                (output_segment, main): Use it.

        2014-09-19  Segher Boessenkool  <segher@kernel.crashing.org>

                * dg-extract-results.py (Prog.result_re): Include options
                in test name.

        2014-10-02  Segher Boessenkool  <segher@kernel.crashing.org>

                * dg-extract-results.py (output_variation): Always sort if
                do_sum.

2014-12-15  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/gdb.exp (default_gdb_start): After starting gdb, loop
        as long as we get pagination notifications.

2014-12-15  Jason Merrill  <jason@redhat.com>

        * Makefile.in (check-gdb.%): Restore.
        * README: Mention it.

2014-12-13  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/str_uninit: New testcase.

2014-12-13  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR symtab/17642
        * gdb.base/vla-stub-define.c: New file.
        * gdb.base/vla-stub.c: New file.
        * gdb.base/vla-stub.exp: New file.

2014-12-12  Phil Muldoon  <pmuldoon@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        * configure.ac: Add gdb.compile/.
        * configure: Regenerate.
        * gdb.compile/Makefile.in: New file.
        * gdb.compile/compile-ops.exp: New file.
        * gdb.compile/compile-ops.c: New file.
        * gdb.compile/compile-tls.c: New file.
        * gdb.compile/compile-tls.exp: New file.
        * gdb.compile/compile-constvar.S: New file.
        * gdb.compile/compile-constvar.c: New file.
        * gdb.compile/compile-mod.c: New file.
        * gdb.compile/compile-nodebug.c: New file.
        * gdb.compile/compile-setjmp-mod.c: New file.
        * gdb.compile/compile-setjmp.c: New file.
        * gdb.compile/compile-setjmp.exp: New file.
        * gdb.compile/compile-shlib.c: New file.
        * gdb.compile/compile.c: New file.
        * gdb.compile/compile.exp: New file.
        * lib/gdb.exp (skip_compile_feature_tests): New proc.

2014-12-12  Tom Tromey  <tromey@redhat.com>

        * lib/dwarf.exp (_location): Ignore blank lines.  Allow comments.
        Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.

2014-12-12  Doug Evans  <dje@google.com>

        * lib/gdb-python.exp (get_python_valueof): New function.
        * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.

2014-12-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/completion.exp: Add test for completion of "info
        registers ".

2014-12-12  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.base/func-ptrs.c: New file.
        * gdb.base/func-ptrs.exp: New file.

2014-12-10  Simon Marchi  <simon.marchi@ericsson.com>

        PR breakpoints/17012
        * gdb.base/dprintf-detach.c: New file.
        * gdb.base/dprintf-detach.exp: New file.

2014-12-10  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.trace/qtro.exp: Replace gdbserver detection code by...
        * lib/gdb.exp (target_is_gdbserver): New procedure.

2014-12-08  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Add tests for objfile.owner.

2014-12-05  Yao Qi  <yao@codesourcery.com>

        * gdb.guile/scm-error.exp: Remove the third argument to
        gdb_remote_download.
        * gdb.guile/scm-frame-args.exp: Likewise.
        * gdb.guile/scm-section-script.exp: Likewise.

2014-12-05  Yao Qi  <yao@codesourcery.com>

        * gdb.arch/i386-bp_permanent.exp: Use standard_testfile.

2014-12-04  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Add tests for
        objfile.add_separate_debug_file.

2014-12-04  Doug Evans  <dje@google.com>

        * lib/gdb.exp (get_build_id): New function.
        (build_id_debug_filename_get): Rewrite to use it.
        * gdb.python/py-objfile.exp: Add test for objfile.build_id.

2014-12-04  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
        `method(long)', not just 0x0.
        * gdb.cp/nsalias.exp: Align code labels to 4.
        * gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
        * gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
        * gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
        * gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
        (cu_text_start, FUNC_lang_start): Use `START_INSNS'.
        * gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.

2014-12-02  Doug Evans  <dje@google.com>

        PR symtab/17602
        * gdb.cp/anon-ns.cc: Move guts of this file to ...
        * gdb.cp/anon-ns2.cc: ... here.  New file.
        * gdb.cp/anon-ns.exp: Update.

2014-12-02  Nick Bull  <nicholaspbull@gmail.com>

        * gdb.python/py-events.py (inferior_call_handler): New.
        (register_changed_handler, memory_changed_handler): New.
        (test_events.invoke): Register new handlers.
        * gdb.python/py-events.exp: Add tests for inferior call,
        memory_changed and register_changed events.

2014-12-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/execl-update-breakpoints.exp: Specify the link address
        with '-Ttext-segment' instead of '-Ttext'.  Fall back to '-Ttext'
        if the linker doesn't understand this.

2014-12-01  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/python.exp: Change expected reply to help().

2014-12-01  Yao Qi  <yao@codesourcery.com>

        * configure.ac: Remove AC_ARG_ENABLE for gdbtk.  Don't invoke
        AC_CONFIG_SUBDIRS(gdb.gdbtk).
        * configure: Re-generated.

2014-11-28  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.cp/chained-calls.cc: New file.
        * gdb.cp/chained-calls.exp: New file.
        * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".

2014-11-28  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.ada/py_range.exp: Add parentheses to python calls to print.
        * gdb.dwarf2/symtab-producer.exp: Same.
        * gdb.gdb/python-interrupts.exp: Same.
        * gdb.gdb/python-selftest.exp: Same.
        * gdb.python/py-linetable.exp: Same.
        * gdb.python/py-type.exp: Same.
        * gdb.python/py-value-cc.exp: Same.
        * gdb.python/py-value.exp: Same.

2014-11-28  Yao Qi  <yao@codesourcery.com>

        * gdb.base/break-probes.exp: Match library name prefixed with
        sysroot.

2014-11-27  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.python/py-linetable.exp: Escape properly sorted(fset)
        test expected output.  Add parentheses for the call to print.
        Remove L suffix from integers.

2014-11-26  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw2-op-out-param.S: Fix comment.

2014-11-22  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/entry-values.c: Remove asms.
        (foo): Add foo_label.
        (bar): Add bar_label.
        * gdb.trace/entry-values.exp: Remove code computing  foo's
        length and bar's length.
        (Dwarf::assemble): Invoke function_range for bar and use
        MACRO_AT_func for foo.

2014-11-22  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
        and .Lgcc43_procstart.  Use .Lgcc42_procstart instead of gcc42.
        Use .Lgcc43_procstart instead of gcc43.

2014-11-21  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/n_arr_bound: New testcase.

2014-11-20  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR breakpoints/10737
        * gdb.base/catch-syscall.exp (do_syscall_tests): Call
        test_catch_syscall_multi_arch.
        (test_catch_syscall_multi_arch): New function.

2014-11-20  Doug Evans  <xdje42@gmail.com>

        * gdb.base/maint.exp: Update expected output.

2014-11-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
        4-byte instruction on S390.

2014-11-19  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/arr_arr: New testcase.

2014-11-19  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pkd_arr_elem: New Testcase.

2014-11-18  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.reverse/break-precsave: Expect completion message for
        core file reads.
        * gdb.reverse/consecutive-precsave.exp: Likewise.
        * gdb.reverse/finish-precsave.exp: Likewise.
        * gdb.reverse/i386-precsave.exp: Likewise.
        * gdb.reverse/machinestate-precsave.exp: Likewise.
        * gdb.reverse/sigall-precsave.exp: Likewise.
        * gdb.reverse/solib-precsave.exp: Likewise.
        * gdb.reverse/step-precsave.exp: Likewise.
        * gdb.reverse/until-precsave.exp: Likewise.
        * gdb.reverse/watch-precsave.exp: Likewise.

2014-11-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/bp-permanent.c: Include unistd.h.
        * gdb.python/py-framefilter-mi.c (main): Add return type.
        * gdb.python/py-framefilter.c (main): Likewise.
        * gdb.trace/actions-changed.c (main): Likewise.

2014-11-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.mi/until.c: Add eye-catchers.
        * gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
        line numbers.

2014-11-17  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/condbreak.exp: Drop references to removed non-prototype
        function header variants in break1.c.
        * gdb.base/ena-dis-br.exp: Likewise.
        * gdb.base/hbreak2.exp: Likewise.
        * gdb.reverse/until-precsave.exp: Drop references to removed
        non-prototype function header variants in ur1.c.
        * gdb.reverse/until-reverse.exp: Likewise.

2014-11-17  Petr Machata  <pmachata@redhat.com>

        * lib/dwarf.exp  (Dwarf::cu, Dwarf::tu): Emit
        ${_cu_offset_size} bytes abbrev offset.

2014-11-15  Doug Evans  <xdje42@gmail.com>

        PR symtab/17559
        * gdb.base/line-symtabs.exp: New file.
        * gdb.base/line-symtabs.c: New file.
        * gdb.base/line-symtabs.h: New file.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
        (func): Add label func_label.
        * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
        Replace low_pc and high_pc with MACRO_AT_range.
        Replace name, low_pc and high_pc with MACRO_AT_func.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
        Replace name, low_pc and high_pc with MACRO_AT_func.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
        produce debug information.
        * gdb.dwarf2/implptr-optimized-out.S: Removed.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
        object and get function length.
        (Dwarf::assemble): Replace name, low_pc and high_pc attributes
        with MACRO_AT_func.
        (top-level): Replace gdb_compile and clean_restart with
        prepare_for_testing.
        * gdb.dwarf2/main.c (main): Add label main_label.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * lib/dwarf.exp (function_range): New procedure.
        (Dwarf::_handle_macro_at_func): New procedure.
        (Dwarf::_handle_macro_at_range): New procedure.
        (Dwarf): Handle MACRO_AT_func and MACRO_AT_range.

2014-11-14  Yao Qi  <yao@codesourcery.com>

        * lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
        (_handle_attribute): New procedure.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.ada/cond_lang/foo.c (callme): Add return type.
        * gdb.base/call-sc.c (zed): Likewise.
        * gdb.base/checkpoint.c (main): Likewise.
        * gdb.base/dump.c (main): Likewise.
        * gdb.base/gcore.c (main): Likewise.
        * gdb.base/huge.c (main): Likewise.
        * gdb.base/multi-forks.c (main): Likewise.
        * gdb.base/pr10179-a.c (main): Likewise.
        * gdb.base/savedregs.c (main): Likewise.
        * gdb.base/sigaltstack.c (main): Likewise.
        * gdb.base/siginfo.c (main): Likewise.
        * gdb.base/structs.c (zed): Likewise.
        * gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
        * gdb.mi/mi-syn-frame.c (main): Likewise.
        * gdb.mi/until.c (foo, main): Likewise.
        * gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
        * gdb.base/solib-weak.c (foo): Declare.
        * gdb.base/attach-twice.c: Include stdio.h.
        * gdb.base/weaklib1.c: Likewise.
        * gdb.base/weaklib2.c: Likewise.
        * gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
        * gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
        unistd.h.
        * gdb.base/attach-pie-misread.c: Include stdlib.h.
        * gdb.mi/mi-exit-code.c: Likewise.
        * gdb.base/break-interp-lib.c: Include string.h.
        * gdb.base/coremaker.c: Likewise.
        * gdb.base/testenv.c: Likewise.
        * gdb.python/py-finish-breakpoint.c: Likewise.
        * gdb.base/inferior-died.c: Include sys/wait.h.
        * gdb.base/fileio.c: Include time.h.
        * gdb.base/async-shell.c: Include unistd.h.
        * gdb.base/dprintf-non-stop.c: Likewise.
        * gdb.base/info-os.c: Likewise.
        * gdb.mi/mi-console.c: Likewise.
        * gdb.mi/watch-nonstop.c: Likewise.
        * gdb.python/py-events.c: Likewise.
        * gdb.base/async.c (baz): Move up before its invocation.
        * gdb.base/code_elim2.c (my_global_func): Likewise.
        * gdb.base/skip-solib-lib.c (multiply): Likewise.
        * gdb.base/advance.c (func2): Likewise.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped
        variant.
        * gdb.base/annota3.c: Likewise.
        * gdb.base/async.c: Likewise.
        * gdb.base/average.c: Likewise.
        * gdb.base/call-ar-st.c: Likewise.
        * gdb.base/call-rt-st.c: Likewise.
        * gdb.base/call-sc.c: Likewise.
        * gdb.base/call-strs.c: Likewise.
        * gdb.base/ending-run.c: Likewise.
        * gdb.base/execd-prog.c: Likewise.
        * gdb.base/exprs.c: Likewise.
        * gdb.base/foll-exec.c: Likewise.
        * gdb.base/foll-fork.c: Likewise.
        * gdb.base/foll-vfork.c: Likewise.
        * gdb.base/funcargs.c: Likewise.
        * gdb.base/gcore.c: Likewise.
        * gdb.base/jump.c: Likewise.
        * gdb.base/langs0.c: Likewise.
        * gdb.base/langs1.c: Likewise.
        * gdb.base/langs2.c: Likewise.
        * gdb.base/mips_pro.c: Likewise.
        * gdb.base/nodebug.c: Likewise.
        * gdb.base/opaque0.c: Likewise.
        * gdb.base/opaque1.c: Likewise.
        * gdb.base/recurse.c: Likewise.
        * gdb.base/run.c: Likewise.
        * gdb.base/scope0.c: Likewise.
        * gdb.base/scope1.c: Likewise.
        * gdb.base/setshow.c: Likewise.
        * gdb.base/setvar.c: Likewise.
        * gdb.base/shmain.c: Likewise.
        * gdb.base/shr1.c: Likewise.
        * gdb.base/shr2.c: Likewise.
        * gdb.base/sigall.c: Likewise.
        * gdb.base/signals.c: Likewise.
        * gdb.base/so-indr-cl.c: Likewise.
        * gdb.base/solib2.c: Likewise.
        * gdb.base/structs.c: Likewise.
        * gdb.base/sum.c: Likewise.
        * gdb.base/vforked-prog.c: Likewise.
        * gdb.base/watchpoint.c: Likewise.
        * gdb.reverse/shr2.c: Likewise.
        * gdb.reverse/until-reverse.c: Likewise.
        * gdb.reverse/ur1.c: Likewise.
        * gdb.reverse/watch-reverse.c: Likewise.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
        variant.
        * gdb.base/sepdebug.exp: Drop references to removed code.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
        variant.  Preserve original line numbering.
        * gdb.base/list1.c: Likewise.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
        variant.
        * gdb.base/break1.c: Likewise.
        * gdb.base/break.exp: Drop references to removed code.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped
        variant.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/callfuncs.exp (perform_all_tests): Re-indent.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/callfuncs.exp: Remove 'prototypes' variable.  Move main
        logic into perform_all_tests() and invoke it with and without
        function header prototypes.
        (do_function_calls): Remove conditional XFAIL for PR 5318.
        (rerun_and_prepare): Remove duplicate code.
        (perform_all_tests): New.  Main logic moved here.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
        code guarded by #ifdef NO_PROTOTYPES.
        (t_double_many_args): Likewise.
        (DEF_FUNC_MANY_ARGS_1): Likewise.
        (DEF_FUNC_VALUES_1): Likewise.
        (t_structs_ldc): Renamed from t_structs_fc in conditional code
        guarded by #ifdef PROTOTYPES.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.mi/mi-console.c: Add eye-catcher.
        * gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
        instead of literal line number.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/shr2.c: Add eye-catcher.
        * gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
        line number.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/jump.c: Add eye-catchers.
        * gdb.base/jump.exp: Refer to eye-catchers instead of literal line
        numbers.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/execd-prog.c: Add eye-catchers.
        * gdb.base/foll-exec.c: Likewise.
        * gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
        line numbers.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/ending-run.c: Add eye-catchers.
        * gdb.base/ending-run.exp: Refer to eye-catchers instead of
        literal line numbers.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/call-rt-st.c: Add eye-catchers.
        * gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
        literal line numbers.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/call-ar-st.c: Add eye-catchers.
        * gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
        literal line numbers.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/average.c: Add eye-catchers.
        * gdb.base/sum.c: Likewise.
        * gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
        regexps dynamically.

2014-11-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/solib1.c: Add eye-catchers.
        * gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
        literal line numbers.

2014-11-12  Pedro Alves  <palves@redhat.com>

        * gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
        leader has exited.

2014-11-12  Pedro Alves  <palves@redhat.com>

        * gdb.arch/i386-bp_permanent.c: New file.
        * gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
        (srcfile): Set to i386-bp_permanent.c.
        (top level): Adjust to work in both 32-bit and 64-bit modes.  Test
        that stepi does not execute the 'leave' instruction, instead of
        testing it does execute.
        * gdb.base/bp-permanent.c: New file.
        * gdb.base/bp-permanent.exp: New file.

2014-11-10  Doug Evans  <xdje42@gmail.com>

        PR symtab/17564
        * gdb.base/symtab-search-order.exp: New file.
        * gdb.base/symtab-search-order.c: New file.
        * gdb.base/symtab-search-order-1.c: New file.
        * gdb.base/symtab-search-order-shlib-1.c: New file.

2014-11-07  Pedro Alves  <palves@redhat.com>

        PR gdb/17511
        * gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
        i?86-*-linux*.

2014-11-03  Siva Chandra Reddy  <sivachandra@google.com>

        PR c++/17494
        * gdb.cp/pr17494.cc: New file.
        * gdb.cp/pr17494.exp: New file.

2014-11-02  Yao Qi  <yao@codesourcery.com>

        * gdb.python/python.exp: Get working directory and match the
        output of "set extended-prompt \\w " with it.

2014-10-30  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Add tests for setting random attributes
        in objfiles.
        * gdb.python/py-progspace.exp: Add tests for setting random attributes
        in progspaces.

2014-10-30  Janis Johnson  <janisjo@codesourcery.com>

        * gdb.base/fullpath-expand.exp: Skip for a remote host.
        * gdb.base/realname-expand.exp: Likewise.
        * gdb.linespec/macro-relative.exp: Likewise.

2014-10-29  Pedro Alves  <palves@redhat.com>

        PR gdb/17408
        * gdb.threads/schedlock.c (some_function): New function.
        (call_function): New global.
        (MAYBE_CALL_SOME_FUNCTION): New macro.
        (thread_function): Call it.
        * gdb.threads/schedlock.exp (get_args): Add description parameter,
        and use it instead of a global counter.  Adjust all callers.
        (get_current_thread): Use "find current thread" for test message
        here rather than having all callers pass down the same string.
        (goto_loop): New procedure, factored out from ...
        (my_continue): ... this.
        (step_ten_loops): Change parameter from test message to command to
        use.  Adjust.
        (list_count): Delete global.
        (check_result): New procedure, factored out from duplicate top
        level code.
        (continue tests): Wrap in with_test_prefix.
        (test_step): New procedure, factored out from duplicate top level
        code.
        (top level): Test "step" in combination with all scheduler-locking
        modes.  Test "next" in combination with all scheduler-locking
        modes, and in combination with stepping over a function call or
        not.
        * gdb.threads/next-bp-other-thread.c: New file.
        * gdb.threads/next-bp-other-thread.exp: New file.

2014-10-29  Pedro Alves  <palves@redhat.com>

        PR python/17372
        * gdb.python/python.exp: Test a multi-line command that spawns
        interactive Python.
        * gdb.base/multi-line-starts-subshell.exp: New file.

2014-10-29  Yao Qi  <yao@codesourcery.com>

        * gdb.base/fileio.exp: Make directories on host.

2014-10-29  Yao Qi  <yao@codesourcery.com>

        * gdb.base/fileio.c (test_write): Close the file.

2014-10-28  Pedro Alves  <palves@redhat.com>

        PR gdb/12623
        * gdb.base/sigstep.c (no_handler): New global.
        (main): If 'no_handler is true, set the signal handlers to
        SIG_IGN.
        * gdb.base/sigstep.exp (breakpoint_over_handler): Add
        with_sw_watch and no_handler parameters.  Handle them.
        (top level) <stepping over handler when stopped at a breakpoint
        test>: Add a test axis for testing with a software watchpoint, and
        another for testing with the signal handler set to SIG_IGN.
        * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
        * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.

2014-10-28  Pedro Alves  <palves@redhat.com>

        PR gdb/17511
        * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
        * gdb.base/sigstep.exp (other_handler_location): New global.
        (advance): Support stepping into the signal handler, and running
        commands while in the handler.
        (in_handler_map): New global.
        (top level): In the advance test, add combinations for getting
        into the handler with stepping commands, and for running commands
        in the handler.  Add comment descripting the advancei tests.

2014-10-28  Pedro Alves  <palves@redhat.com>

        * gdb.base/sigstep.exp: Use build_executable instead of
        prepare_for_testing.
        (top level): Move code that starts GDB, runs to main and creates a
        display to ...
        (restart): ... this new procedure.
        (top level): Move backtrace from signal handler test to ...
        (validate_backtrace): ... this new procedure.
        (advance, advancei): Rename parameter from 'i' to 'cmd'.  Use
        with_test_prefix.  Always restart GDB.
        (skip_to_handler): Rename parameter from 'i' to 'cmd'.  Use
        with_test_prefix.  Always restart GDB.  No need to delete
        breakpoints after the test.
        (test_skip_handler): Remove prefix parameter.
        (skip_over_handler, breakpoint_to_handler)
        (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
        parameter from 'i' to 'cmd'.  Use with_test_prefix.  Always
        restart GDB.  No need to delete breakpoints after the test.
        (top level): Use foreach to call the test procedures with
        different commands.

2014-10-28  Pedro Alves  <palves@redhat.com>

        * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
        instead of GNATS numbers.
        * gdb.base/sigbpt.exp: Likewise.
        * gdb.base/siginfo.exp: Likewise.
        * gdb.base/sigstep.exp: Likewise.

2014-10-27  Pedro Alves  <palves@redhat.com>

        * gdb.base/sigstep.c (dummy): New global.
        (main): Issue a couple writes to the new global.
        * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
        procedures.
        (skip_over_handler): Use test_skip_handler.
        (top level): Call skip_over_handler for stepi and nexti too.
        (breakpoint_over_handler): Use test_skip_handler.
        (top level): Call breakpoint_over_handler for stepi and nexti too.

2014-10-27  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/tfile.c (adjust_function_address)
        [__powerpc64__ && _CALL_ELF != 2]: Get function address from
        function descriptor.

2014-10-24  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/foll-fork.exp (test_follow_fork,
        catch_fork_child_follow): Check for updated fork messages emitted
        from infrun.c.
        * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
        vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
        vfork_and_exec_child_follow_through_step): Check for updated vfork
        messages emitted from infrun.c.

2014-10-24  Pedro Alves  <palves@redhat.com>

        * gdb.base/corefile.exp: Remove references to ultrix.
        * gdb.base/interrupt.exp: Likewise.
        * gdb.base/whatis.exp: Likewise.
        * gdb.gdb/selftest.exp: Likewise.
        * gdb.threads/manythreads.exp: Likewise.
        * gdb.threads/print-threads.exp: Likewise.
        * gdb.threads/pthreads.exp:: Likewise.
        * gdb.threads/schedlock.exp: Likewise.

2014-10-24  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.cp/non-trivial-retval.cc: Add a test case.
        * gdb.cp/non-trivial-retval.exp: Add a test.

2014-10-20  Yao Qi  <yao@codesourcery.com>

        * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
        * gdb.python/py-objfile-script-gdb.py: New file.
        * gdb.python/py-objfile-script.exp: Update reference to
        py-objfile-script-gdb.py.in.  Use gdb_remote_donwload instead
        of remote_download.  Remove the dest file.

2014-10-20  Yao Qi  <yao@codesourcery.com>

        * gdb.base/checkpoint.exp: Don't remove file copied on host.
        * gdb.base/step-line.exp: Likewise.
        * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
        * gdb.dwarf2/dw2-basic.exp: Likewise.
        * gdb.dwarf2/dw2-compressed.exp: Likewise.
        * gdb.dwarf2/dw2-filename.exp: Likewise.
        * gdb.dwarf2/dw2-intercu.exp: Likewise.
        * gdb.dwarf2/dw2-intermix.exp: Likewise.
        * gdb.dwarf2/dw2-producer.exp: Likewise.
        * gdb.dwarf2/mac-fileno.exp: Likewise.
        * gdb.python/py-frame-args.exp: Likewise.
        * gdb.python/py-framefilter.exp: Likewise.
        * gdb.python/py-mi.exp: Likewise.
        * gdb.python/py-objfile-script.exp: Likewise
        * gdb.python/py-pp-integral.exp: Likewise.
        * gdb.python/py-pp-re-notag.exp: Likewise.
        * gdb.python/py-prettyprint.exp: Likewise.
        * gdb.python/py-section-script.exp: Likewise.
        * gdb.python/py-typeprint.exp: Likewise.
        * gdb.python/py-xmethods.exp: Likewise.
        * gdb.stabs/weird.exp: Likewise.
        * gdb.xml/tdesc-regs.exp: Likewise.

2014-10-18  Kwok Cheung Yeung  <kcy@codesourcery.com>

        * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
        (out_cu): Use addr_len for the size of addresses.
        (out_line): Likewise.  Size DW_LNE_set_address instruction
        according to addr_len.
        * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
        (FUNC): Add START_INSNS to definition.

2014-10-18  Yao Qi  <yao@codesourcery.com>

        * gdb.base/argv0-symlink.exp: Check argv[0] value if
        gdb_has_argv0 return true.
        * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
        check [target_info exists noargs], check [gdb_has_argv0]
        instead.
        * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
        * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
        procedures.

2014-10-17  Doug Evans  <dje@google.com>

        * gdb.python/py-events.exp: Update expected output for clear_objfiles
        event.
        * gdb.python/py-events.py: Add clear_objfiles event.

2014-10-17  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Test progspace attribute.

2014-10-17  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.guile/scm-breakpoint.exp: Do not assume any
        directory separators when matching source file paths.
        * gdb.python/py-breakpoint.exp: Likewise.
        * gdb.reverse/break-precsave.exp: Likewise.
        * gdb.reverse/break-reverse.exp: Likewise.
        * gdb.reverse/consecutive-precsave.exp: Likewise.
        * gdb.reverse/finish-precsave.exp: Likewise.
        * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
        * gdb.reverse/finish-reverse.exp: Likewise.
        * gdb.reverse/i386-precsave.exp: Likewise.
        * gdb.reverse/i387-env-reverse.exp: Likewise.
        * gdb.reverse/i387-stack-reverse.exp: Likewise.
        * gdb.reverse/machinestate-precsave.exp: Likewise.
        * gdb.reverse/machinestate.exp: Likewise.
        * gdb.reverse/sigall-precsave.exp: Likewise.
        * gdb.reverse/solib-precsave.exp: Likewise.
        * gdb.reverse/step-precsave.exp: Likewise.
        * gdb.reverse/until-precsave.exp: Likewise.
        * gdb.reverse/watch-precsave.exp: Likewise.
        * gdb.reverse/watch-reverse.exp: Likewise.

2014-10-17  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
        * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.

2014-10-17  Pedro Alves  <palves@redhat.com>

        PR gdb/17471
        * gdb.base/bg-execution-repeat.c: New file.
        * gdb.base/bg-execution-repeat.exp: New file.

2014-10-17  Pedro Alves  <palves@redhat.com>

        PR gdb/17300
        * gdb.base/continue-all-already-running.c: New file.
        * gdb.base/continue-all-already-running.exp: New file.

2014-10-17  Pedro Alves  <palves@redhat.com>

        PR gdb/17472
        * gdb.base/annota-input-while-running.c: New file.
        * gdb.base/annota-input-while-running.exp: New file.

2014-10-17  Pedro Alves  <palves@redhat.com>

        * gdb.base/callfuncs.exp: emove references to osf.
        * gdb.base/sigall.exp: Likewise.
        * gdb.gdb/selftest.exp: Likewise.
        * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
        * gdb.mi/non-stop.c: Likewise.
        * gdb.mi/pthreads.c: Likewise.
        * gdb.reverse/sigall-precsave.exp: Likewise.
        * gdb.reverse/sigall-reverse.exp: Likewise.
        * gdb.threads/pthreads.c: Likewise.
        * gdb.threads/pthreads.exp: Likewise.

2014-10-17  Yao Qi  <yao@codesourcery.com>

        * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
        check 'target_info exists noargs'.
        (test_command_prompt_position): Likewise.
        (progvar_simple_if_test): Don't check 'target_info exists noargs'.
        Remove "set args".
        (progvar_simple_while_test): Likewise.
        (progvar_complex_if_while_test): Likewise.
        (if_while_breakpoint_command_test): Likewise.
        (infrun_breakpoint_command_test): Likewise.
        (breakpoint_command_test): Likewise.
        (watchpoint_command_test): Likewise.
        (bp_deleted_in_command_test): Likewise.
        (temporary_breakpoint_commands): Likewise.

2014-10-16  Yao Qi  <yao@codesourcery.com>

        * gdb.base/remotetimeout.exp: Remove noargs checking.

2014-10-15  Pedro Alves  <palves@redhat.com>

        PR breakpoints/9649
        * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
        * gdb.base/breakpoint-in-ro-region.exp
        (probe_target_hardware_step): New procedure.
        (top level): Probe hardware stepping and hardware breakpoint
        support.  Test stepping through a read-only region, with both
        "breakpoint auto-hw" on and off and both "always-inserted" on and
        off.

2014-10-15  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/demangle.exp: Update for demangling changes.

2014-10-15  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.cp/non-trivial-retval.cc: Add new test cases.
        * gdb.cp/non-trivial-retval.exp: Add new tests.

2014-10-15  Siva Chandra Reddy  <sivachandra@google.com>

        PR c++/13403
        PR c++/15154
        * gdb.cp/non-trivial-retval.cc: New file.
        * gdb.cp/non-trivial-retval.exp: New file.

2014-10-15  Yao Qi  <yao@codesourcery.com>

        * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
        remote host.

2014-10-15  Yao Qi  <yao@codesourcery.com>

        * gdb.python/py-symbol.exp: Match file base name if host is
        remote, otherwise match file name with dir name.
        * gdb.python/py-symtab.exp: Likewise.
        * gdb.python/python.exp: Likewise.

2014-10-15  Yao Qi  <yao@codesourcery.com>

        * gdb.python/py-symbol.exp: Remove trailing ".*" in the
        pattern.
        * gdb.python/py-symtab.exp: Likewise.
        * gdb.python/python.exp: Remove trailing ".*".  Fix typo
        locationn.

2014-10-14  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/addr_arith: New testcase.

2014-10-14  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
        * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
        * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
        * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.

2014-10-14  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.arch/stap-eval-lang-ada.S: Likewise.
        * gdb.arch/stap-eval-lang-ada.c: Likewise.
        * gdb.arch/stap-eval-lang-ada.exp: New file.

2014-10-14  Yao Qi  <yao@codesourcery.com>

        * gdb.mi/mi-var-child.c (nothing1): New function.
        (nothing2): New function.
        (do_children_tests): Set function pointers by nothing1 and
        nothing2.
        * gdb.mi/mi-var-child.exp: Step over new added statements.
        Update test to match the new output.
        * gdb.mi/var-cmd.c (nothing1): New function.
        (nothing2): New function.
        (do_children_tests): Set function pointers by  nothing1 and
        nothing2.
        * gdb.mi/mi-var-display.exp: Update test to match output.
        Step to the line specified by $line_dct_nothing.
        Increase the number of lines to step.

2014-10-14  Yao Qi  <yao@codesourcery.com>

        * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
        tests.
        * gdb.mi/mi2-var-child.exp: Likewise.

2014-10-13  Doug Evans  <dje@google.com>

        * gdb.python/py-objfile.exp: Change name of file name test.

2014-10-13  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
        from the start of the CU.

2014-10-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Yao Qi  <yao@codesourcery.com>

        Fix "save breakpoints" for "catch" command.
        * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
        Remove -nonewline.  Match also the added "main" line.

2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix "save breakpoints" for "disable $bpnum" command.
        * gdb.base/save-bp.c (main): Add label.
        * gdb.base/save-bp.exp: Add 8th disabled breakpoint.  Match it.

2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.

2014-10-11  Yao Qi  <yao@codesourcery.com>

        * gdb.server/server-kill.exp: Execute command
        "set remote trace-status-packet on" before "tstatus".

2014-10-11  Yao Qi  <yao@codesourcery.com>

        * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
        (main): Call getppid.
        * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
        and continue to it.  Read variable "server_pid".

2014-10-11  Yao Qi  <yao@codesourcery.com>

        * gdb.server/server-kill.exp: Remove "delete_breakpoints".

2014-10-11  Yao Qi  <yao@codesourcery.com>

        * gdb.threads/thread-find.exp: Don't execute command
        "info threads".
        * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
        * gdb.threads/linux-dp.exp: Don't check the condition
        $threads_created equals to zero.

2014-10-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/bigcore.exp: Remove references to IRIX.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/interrupt.exp: Likewise.
        * gdb.base/mips_pro.exp: Likewise.
        * gdb.base/nodebug.exp: Likewise.
        * gdb.base/setvar.exp: Likewise.
        * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.

2014-10-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
            Pedro Alves  <palves@redhat.com>

        PR symtab/14466
        * gdb.base/vdso-warning.c: New file.
        * gdb.base/vdso-warning.exp: New file.

2014-10-02  Doug Evans  <dje@google.com>

        * gdb.base/structs.c (main): Don't run forever.

2014-10-02  Pedro Alves  <palves@redhat.com>

        * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
        (top level) <stop threads 1, stop threads 2>: Use it.

2014-10-02  Pedro Alves  <palves@redhat.com>

        * gdb.threads/break-while-running.exp (test): Add new
        'update_thread_list' argument.  Skip "info threads" if false.
        (top level): Add new 'update_thread_list' axis.

2014-10-02  Pedro Alves  <palves@redhat.com>

        PR breakpoints/17431
        * gdb.base/execl-update-breakpoints.c: New file.
        * gdb.base/execl-update-breakpoints.exp: New file.

2014-10-01  Pedro Alves  <palves@redhat.com>

        * gdb.base/breakpoint-in-ro-region.c: New file.
        * gdb.base/breakpoint-in-ro-region.exp: New file.

2014-10-01  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-exit-code.exp: New file.
        * gdb.mi/mi-exit-code.c: New file.

2014-09-30  Yao Qi  <yao@codesourcery.com>

        * lib/prelink-support.exp (build_executable_own_libs): Error if
        the target isn't native.

2014-09-30  Yao Qi  <yao@codesourcery.com>

        * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
        false.

2014-09-22  Pedro Alves  <palves@redhat.com>

        * gdb.threads/break-while-running.exp: New file.
        * gdb.threads/break-while-running.c: New file.

2014-09-19  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
        Invoke test.  Restart GDB with --readnow and invoke test again.

2014-09-19  Yao Qi  <yao@codesourcery.com>

        * gdb.base/break-on-linker-gcd-function.exp: Move test into new
        proc set_breakpoint_on_gcd_function.  Invoke
        set_breakpoint_on_gcd_function.  Restart GDB with --readnow and
        invoke set_breakpoint_on_gcd_function again.

2014-09-18  Doug Evans  <dje@google.com>

        * gdb.dwarf2/symtab-producer.exp: New file.

2014-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.base/global-var-nested-by-dso-solib1.c: New file.
        * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
        * gdb.base/global-var-nested-by-dso.c: Likewise.
        * gdb.base/global-var-nested-by-dso.exp: Likewise.

2014-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.base/watch-bitfields.exp: Pass string other than test file
        name to prepare_for_testing.
        (watch): New procedure.
        (expect_watchpoint): Use with_test_prefix.
        (top level): Factor out tests to ...
        (test_watch_location, test_regular_watch): ... these new
        procedures, and use with_test_prefix and gdb_continue_to_end.

2014-09-16  Patrick Palka  <patrick@parcs.ath.cx>

        PR breakpoints/12526
        * gdb.base/watch-bitfields.exp: New file.
        * gdb.base/watch-bitfields.c: New file.

2014-09-16  Pedro Alves  <palves@redhat.com>

        * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
        software and hardware addresses, not software address against
        itself.

2014-09-16  Pedro Alves  <palves@redhat.com>

        * gdb.base/watchpoint-stops-at-right-insn.c: New file.
        * gdb.base/watchpoint-stops-at-right-insn.exp: New file.

2014-09-16  Pedro Alves  <palves@redhat.com>

        * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
        files.
        * gdb.base/a2-run.exp: Remove all code guarded by istarget
        "*-*-vxworks*" throughout.
        * gdb.base/break.exp: Likewise.
        * gdb.base/default.exp: Likewise.
        * gdb.base/scope.exp: Likewise.
        * gdb.base/sepdebug.exp: Likewise.
        * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
        throughout.
        * gdb.base/run.c: Likewise.
        * gdb.base/sepdebug.c: Likewise.
        * gdb.hp/gdb.aCC/run.c: Likewise.
        * gdb.reverse/until-reverse.c: Likewise.
        * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.

2014-09-16  Yao Qi  <yao@codesourcery.com>

        * boards/local-remote-host-native.exp: New file.

2014-09-14  Doug Evans  <xdje42@gmail.com>

        * gdb.threads/queue-signal.c (thread_count): New variable.
        (thread_count_mutex, thread_count_condvar): New variables.
        (incr_thread_count, wait_all_threads_running): New functions.
        (main): Wait for all threads to be in their thread functions.

2014-09-13  Doug Evans  <xdje42@gmail.com>

        * gdb.threads/queue-signal.c: New file.
        * gdb.threads/queue-signal.exp: New file.

2014-09-13  Doug Evans  <xdje42@gmail.com>

        * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
        be consistent with what default_gdb_init uses.
        (with_gdb_prompt): Change form of PROMPT argument from a regexp to
        the plain text of the prompt.  Add some logging printfs.
        * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.

2014-09-12  Pedro Alves  <palves@redhat.com>

        * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
        gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
        * gdb.arch/i386-size-overlap.exp: Likewise.
        * gdb.arch/i386-size.exp: Likewise.
        * gdb.arch/i386-unwind.exp: Likewise.
        * gdb.base/a2-run.exp: Likewise.
        * gdb.base/break.exp: Likewise.
        * gdb.base/charset.exp: Likewise.
        * gdb.base/chng-syms.exp: Likewise.
        * gdb.base/commands.exp: Likewise.
        * gdb.base/dbx.exp: Likewise.
        * gdb.base/find.exp: Likewise.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/jit-simple.exp: Likewise.
        * gdb.base/reread.exp: Likewise.
        * gdb.base/sepdebug.exp: Likewise.
        * gdb.base/step-bt.exp: Likewise.
        * gdb.cp/mb-inline.exp: Likewise.
        * gdb.cp/mb-templates.exp: Likewise.
        * gdb.objc/basicclass.exp: Likewise.
        * gdb.threads/killed.exp: Likewise.

2014-09-12  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        PR tdep/17379
        * gdb.arch/powerpc-stackless.S: New file.
        * gdb.arch/powerpc-stackless.exp: New file.

2014-09-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/attach.c: Include unistd.h.
        (main): Call alarm.  Add label postloop.
        * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
        gdb_breakpoint, gdb_continue_to_breakpoint.
        (test_command_line_attach_run): Kill ${testpid} in one exit path.

2014-09-11  Pedro Alves  <palves@redhat.com>

        PR gdb/17347
        * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
        * gdb.base/attach.exp (test_command_line_attach_run): New
        procedure.
        (top level): Call it.

2014-09-11  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (spawn_wait_for_attach): New procedure.
        * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
        (do_command_attach_tests): Use spawn_wait_for_attach.
        * gdb.base/solib-overlap.exp: Likewise.
        * gdb.multi/multi-attach.exp: Likewise.
        * gdb.python/py-prompt.exp: Likewise.
        * gdb.python/py-sync-interp.exp: Likewise.
        * gdb.server/ext-attach.exp: Likewise.

2014-09-11  Gabriel Krisman Bertazi  <gabriel@krisman.be>

        * gdb.fortran/array-element.exp: Remove unexpected "continue"
        command in testcase.  Simplify testcase.

2014-09-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.

2014-09-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.

2014-09-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.

2014-09-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dynarr-ptr.c: New file.
        * gdb.dwarf2/dynarr-ptr.exp: New file.

2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
        of 30 rather than hardcoding 120 for a slow test case.  Take the
        `gdb,timeout' target setting into account for this calculation.
        Don't extend the timeout for the test cases that don't need it.

2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.reverse/sigall-reverse.exp: Increase the timeout by
        a factor of 2 for a slow test case.  Take the `gdb,timeout'
        target setting into account for this calculation.
        * gdb.reverse/until-precsave.exp: Increase the timeout by
        a factor of 15 and 3 respectively rather than adding 120
        for a pair of slow test cases.  Take the `gdb,timeout'
        target setting into account for this calculation.

2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * lib/gdb.exp (gdb_test_multiple): Remove code to select the
        timeout, don't pass one down to gdb_expect.
        (gdb_expect): Rework timeout selection.

2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * lib/gdbserver-support.exp (gdbserver_start): Throw an error
        exception on timeout.
        (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
        (gdbserver_start_extended): Catch any `gdbserver_start' error
        exceptions.
        (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
        * lib/mi-support.exp (mi_gdb_target_load): Catch any
        `gdbserver_gdb_load' error exceptions.

2014-09-09  Maciej W. Rozycki  <macro@codesourcery.com>

        * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
        120 on waiting for the TCP socket to open.

2014-09-09  Doug Evans  <xdje42@gmail.com>

        * gdb.base/default.exp (show_conv_list): Add _caller_is,
        _caller_matches, _any_caller_is, _any_caller_matches.

2014-09-09  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.

2014-09-09  Yao Qi  <yao@codesourcery.com>

        * gdb.mi/mi-var-display.exp: Set print symbol off.

2014-09-07  Gabriel Krisman Bertazi  <gabriel@krisman.be>

        PR gdb/17035
        * gdb.base/commands.exp: Add tests to verify user-defined
        commands with empty bodies.
        * gdb.python/py-cmd.exp: Test that we don't show user-defined
        python commands in `show user command`.
        * gdb.python/scm-cmd.exp: Test that we don't show user-defined
        scheme commands in `show user command`.

2014-09-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR python/17355
        * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
        * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
        * gdb.python/py-framefilter-invalidarg.exp: New file.
        * gdb.python/py-framefilter-invalidarg.py: New file.

2014-09-06  Doug Evans  <xdje42@gmail.com>

        PR 15276
        * gdb.python/py-caller-is.c: New file.
        * gdb.python/py-caller-is.exp: New file.

2014-09-05  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR gdb/17235
        * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
        * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.

2014-09-04  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR fortran/17237
        * gdb.fortran/print-formatted.exp: New file.
        * gdb.fortran/print-formatted.f90: Likewise.

2014-09-03  Sasha Smundak  <asmundak@google.com>

        * gdb.python/py-frame.exp: Test Frame.read_register.

2014-09-03  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR python/16699
        * gdb.python/py-completion.exp: New file.
        * gdb.python/py-completion.py: Likewise.

2014-08-28  Doug Evans  <dje@google.com>

        * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
        eax,etc. are live with values set by gdb and thus the compiler can't
        use them.
        * gdb.arch/i386-pseudo.c (main): Ditto.

2014-08-27  Doug Evans  <dje@google.com>

        * lib/gdb.exp (gdb_compile_shlib): Add support for clang.

2014-08-25  Doug Evans  <dje@google.com>

        * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
        (main): Ditto.

2014-08-25  Doug Evans  <dje@google.com>

        * gdb.threads/thread-execl.exp: #include <stdio.h>.

2014-08-24  Yao Qi  <yao@codesourcery.com>

        * gdb.guile/scm-value.exp (test_lazy_strings): Set print
        symbol off.
        * gdb.python/py-value.exp (test_lazy_strings): Likewise.

2014-08-22  Doug Evans  <dje@google.com>

        PR 17276
        * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
        * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
        * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.

2014-08-22  Yao Qi  <yao@codesourcery.com>

        * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
        * gdb.python/py-finish-breakpoint2.exp: Likewise.
        * gdb.python/python.exp: Likewise.  Use .py file on the host
        instead of the build.

2014-08-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.threads/gcore-stale-thread.c: New file.
        * gdb.threads/gcore-stale-thread.exp: New file.

2014-08-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
        * gdb.base/gcore-relro-pie.exp: Likewise.
        * gdb.base/gcore-relro.exp: Likewise.
        * gdb.base/gcore.exp: Likewise.
        * gdb.base/print-symbol-loading.exp: Likewise.
        * gdb.threads/gcore-thread.exp: Likewise.
        * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".

2014-08-20  Pedro Alves  <palves@redhat.com>
            Jan Kratochvil  <jan.kratochvil@redhat.com>

        * Makefile.in (EXTRA_RULES, CC): New variables, get from
        configure.
        (EXPECT): Handle READ1 being set.
        (all): Depend on EXTRA_RULES.
        (check-read1, expect-read1, read1.so, read1): New rules.
        * README (Testsuite Parameters): Document the READ1 make variable.
        (Race detection): New section.
        * configure: Regenerate.
        * configure.ac: If build==host==target, and running under a
        GNU/glibc system, add read1 to the extra Makefile rules.
        (EXTRA_RULES): AC_SUBST it.
        * lib/read1.c: New file.

2014-08-20  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/data-loc.exp: Add additional tests exercising
        the handling of variables declared as a typedef to an array
        which a DW_AT_data_location attribute.

2014-08-19  Andrew Burgess  <aburgess@broadcom.com>
            Pedro Alves  <palves@redhat.com>

        PR symtab/14604
        PR symtab/14605
        * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
        gdb_test.

2014-08-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.

2014-08-19  Yao Qi  <yao@codesourcery.com>

        * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
        right line.

2014-08-18  David Blaikie  <dblaikie@gmail.com>

        * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.

2014-08-18  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
        attribute in array range.

2014-08-18  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.

2014-08-15  Siva Chandra Reddy  <sivachandra@google.com>

        PR c++/17132
        * gdb.cp/pr17132.cc: New file.
        * gdb.cp/pr17132.exp: New file.

2014-08-15  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-xmethods.py (A_getarrayind)
        (E_method_char_worker.__call__, E_method_int_worker.__call__):
        Use 'print' with function call syntax.
        (E_method_matcher.match): Fix tab vs space indentation mixup.

2014-08-15  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
        false.

2014-08-15  Yao Qi  <yao@codesourcery.com>

        * gdb.cp/casts.exp: Set print symbol off.
        * gdb.cp/class2.exp: Likewise.
        * gdb.cp/overload.exp: Likewise.
        * gdb.cp/templates.exp: Likewise.

2014-08-11  Doug Evans  <dje@google.com>

        * gdb.base/print-symbol-loading.exp (test_load_core): Update.
        (test_load_shlib): Update.

2014-08-09  Yao Qi  <yao@codesourcery.com>

        * gdb.base/display.exp: Invoke is_address_zero_readable.
        * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
        * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
        * gdb.base/hbreak-unmapped.exp: Return if
        is_address_zero_readable returns true.
        * gdb.base/signest.exp: Likewise.
        * gdb.base/signull.exp: Likewise.
        * gdb.base/sigbpt.exp: Likewise.
        * gdb.guile/scm-disasm.exp: Do the test if
        is_address_zero_readable returns false.
        * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
        * gdb.python/py-arch.exp: Likewise.
        * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
        * lib/gdb.exp (is_address_zero_readable): New proc.

2014-08-09  Yao Qi  <yao@codesourcery.com>

        PR testsuite/13443
        * gdb.mi/mi-var-display.exp: Make test messages unique.

2014-08-04  Tom Tromey  <tromey@redhat.com>

        * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
        target 0".

2014-08-04  Tom Tromey  <tromey@redhat.com>

        * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
        "target_resume".

2014-08-01  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/vla-datatypes.c (vla_factory): Add new variable
        inner_vla_struct_object_size.
        * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
        as xfail.

2014-07-30  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-command-handle-nopass.exp (test): Add
        comment.

2014-07-29  Yao Qi  <yao@codesourcery.com>

        PR gdb/17206
        * gdb.base/until-nodebug.exp: New.

2014-07-28  Doug Evans  <xdje42@gmail.com>

        PR guile/17203
        * gdb.guile/scm-parameter.exp: Add tests for trying to create
        previously existing parameter, and previously ambiguously spelled
        parameter.

2014-07-28  Will Newton  <will.newton@linaro.org>

        * gdb.base/varargs.exp: Remove KFAILs for ARM.

2014-07-26  Ludovic Courtès  <ludo@gnu.org>
            Doug Evans  <xdje42@gmail.com>

        PR guile/17146
        * gdb.guile/types-module.exp: Add tests for wrong type arguments.

2014-07-25  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-command-handle-nopass.c: New file.
        * gdb.threads/signal-command-handle-nopass.exp: New file.
        * gdb.threads/signal-command-multiple-signals-pending.c: New file.
        * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
        * gdb.threads/signal-delivered-right-thread.c: New file.
        * gdb.threads/signal-delivered-right-thread.exp: New file.

2014-07-25  Pedro Alves  <palves@redhat.com>

        * gdb.base/double-prompt-target-event-error.exp
        (cancel_pagination_in_target_event): Remove '-notransfer <return>'
        match.
        (cancel_pagination_in_target_event): Rework double prompt
        detection.
        * gdb.base/paginate-after-ctrl-c-running.exp
        (test_ctrlc_while_target_running_paginates): Remove '-notransfer
        <return>' match.
        * gdb.base/paginate-bg-execution.exp
        (test_bg_execution_pagination_return)
        (test_bg_execution_pagination_cancel): Remove '-notransfer
        <return>' matches.
        * gdb.base/paginate-execution-startup.exp
        (test_fg_execution_pagination_return)
        (test_fg_execution_pagination_cancel): Remove '-notransfer
        <return>' matches.
        * gdb.base/paginate-inferior-exit.exp
        (test_paginate_inferior_exited): Remove '-notransfer <return>'
        match.
        * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
        * lib/gdb.exp (pagination_prompt): Run text through
        string_to_regexp.
        (gdb_test_multiple): Match $pagination_prompt instead of
        "<return>".
        (string_to_regexp): Move to lib/gdb-utils.exp.

2014-07-22  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/amd64-entry-value-paramref.S: New file.
        * gdb.arch/amd64-entry-value-paramref.cc: New file.
        * gdb.arch/amd64-entry-value-paramref.exp: New file.
        * gdb.arch/amd64-optimout-repeat.S: New file.
        * gdb.arch/amd64-optimout-repeat.c: New file.
        * gdb.arch/amd64-optimout-repeat.exp: New file.

2014-07-17  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/17170
        * gdb.base/statistics.exp: New file.

2014-07-17  Doug Evans  <dje@google.com>

        PR gdb/17170
        * gdb.base/maint.exp: Update testing of per-command stats.

2014-07-16  Pedro Alves  <palves@redhat.com>

        * gdb.trace/tfile.c: Include unistd.h and stdint.h.
        (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
        (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
        (tfile_write_buf): New functions.
        (add_memory_block): Rewrite using the above.
        (adjust_function_address): New function.
        (FUNCTION_ADDRESS): New macro.
        (write_basic_trace_file): Remove short_x local, and use
        tfile_write_16. Change type of func_addr local to unsigned long
        long.  Use FUNCTION_ADDRESS instead of handling the Thumb bit
        here.  Cast argument of add_memory_block to char pointer.
        (write_error_trace_file): Avoid alloca.  Use FUNCTION_ADDRESS.
        (main): Remove parameters.
        * gdb.trace/tfile.exp: Remove nowarnings.

2014-07-15  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.base/debug-expr.exp: Test string evaluation with
        "debug expression" on.

2014-07-15  Pedro Alves  <palves@redhat.com>

        * gdb.base/reread.exp: Use clean_restart.

2014-07-15  Pierre Langlois  <pierre.langlois@embecosm.com>

        * gdb.arch/avr-flash-qualifer.c: New.
        * gdb.arch/avr-flash-qualifer.exp: New.

2014-07-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/paginate-after-ctrl-c-running.c: New file.
        * gdb.base/paginate-after-ctrl-c-running.exp: New file.

2014-07-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/double-prompt-target-event-error.c: New file.
        * gdb.base/double-prompt-target-event-error.exp: New file.

2014-07-14  Pedro Alves  <palves@redhat.com>

        PR gdb/17072
        * gdb.base/paginate-inferior-exit.c: New file.
        * gdb.base/paginate-inferior-exit.exp: New file.

2014-07-14  Pedro Alves  <palves@redhat.com>

        PR gdb/17072
        * gdb.base/paginate-bg-execution.c: New file.
        * gdb.base/paginate-bg-execution.exp: New file.

2014-07-14  Pedro Alves  <palves@redhat.com>

        PR gdb/17072
        * gdb.base/paginate-execution-startup.c: New file.
        * gdb.base/paginate-execution-startup.exp: New file.
        * lib/gdb.exp (pagination_prompt): New global.
        (default_gdb_spawn): New procedure, factored out from
        default_gdb_spawn.
        (default_gdb_start): Adjust to call default_gdb_spawn.
        (gdb_spawn): New procedure.

2014-07-14  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_assert): New procedure.
        * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.

2014-07-14  Pedro Alves  <palves@redhat.com>

        * gdb.base/execution-termios.c: New file.
        * gdb.base/execution-termios.exp: New file.

2014-07-14  Tom Tromey  <tromey@redhat.com>

        * gdb.cp/vla-cxx.cc: New file.
        * gdb.cp/vla-cxx.exp: New file.

2014-07-14  Tom Tromey  <tromey@redhat.com>

        * gdb.reverse/rerun-prec.c: New file.
        * gdb.reverse/rerun-prec.exp: New file.

2014-07-12  Maciej W. Rozycki  <macro@mips.com>
            Maciej W. Rozycki  <macro@codesourcery.com>

        * lib/gdb-utils.exp: New file.
        * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
        inline `gdb_init_command' processing.
        (gdb_start_cmd): Likewise.
        * lib/mi-support.exp (mi_run_cmd): Likewise.
        * README: Document `gdb_init_command' and `gdb_init_commands'.

2014-07-11  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix false FAIL running under a very long directory name.
        * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
        and "set print elements 10000".  Twice.

2014-07-11  Yao Qi  <yao@codesourcery.com>

        * gdb.base/exprs.exp: "set print symbol off".

2014-07-11  Pedro Alves  <palves@redhat.com>

        * gdb.threads/kill.c: New file.
        * gdb.threads/kill.exp: New file.

2014-07-10  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/tfile.c (write_basic_trace_file)
        [__thumb__||__thumb2__]: Clear the Thumb bit of the function
        address written to trace file.

2014-07-09  Pedro Alves  <palves@redhat.com>

        * gdb.base/attach-wait-input.exp: New file.
        * gdb.base/attach-wait-input.c: New file.

2014-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>

        * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
        setting up test structures.
        (main): Call new test function.
        * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
        test function, continue into test function and walk test
        structures.

2014-07-02  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/entry-values.c: Define labels 'foo_start' and
        'bar_start' at the beginning of functions 'foo' and 'bar'
        respectively.
        * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
        instead of 'foo' and 'bar'.

2014-07-08  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/segv.exp: New.
        * gdb.btrace/segv.c: New.

2014-07-02  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.trace/entry-values.exp: Handle powerpc-specific branch
        instruction.

2014-06-30  Mark Wielaard  <mjw@redhat.com>

        * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
        vulture, vilify, villar): New volatile array constants.
        (vindictive, vegetation): New const volatile array constants.
        * gdb.base/volatile.exp: Test volatile and const volatile array
        types.

2014-06-30  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
        target lacks support for awatch, rwatch, or hbreak.

2014-06-27  Yao Qi  <yao@codesourcery.com>

        * gdb.multi/dummy-frame-restore.exp: New.
        * gdb.multi/dummy-frame-restore.c: New.

2014-06-25  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/gcore.exp: New.

2014-06-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/watchpoint-reuse-slot.c: New file.
        * gdb.base/watchpoint-reuse-slot.exp: New file.

2014-06-23  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-xmethods.exp: Use "progspace" instead of the
        progspace's filename in 'info', 'enable' and 'disable' command
        tests.

2014-06-23  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
        * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
        * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.

2014-06-20  Gary Benson  <gbenson@redhat.com>

        * gdb.arch/i386-avx.exp: Fix include file location.
        * gdb.arch/i386-sse.exp: Likewise.

2014-06-19  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/expression.exp: New file.

2014-06-19  Pedro Alves  <palves@redhat.com>

        * gdb.threads/thread-execl.exp (do_test): New procedure, factored
        out from ...
        (top level): ... here.  Iterate running tests under different
        scheduler-locking settings.

2014-06-18  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
        to DW_FORM_addr and use non-zero addresses.

2014-06-18  Siva Chandra Reddy  <sivachandra@google.com>

        PR gdb/17017
        * gdb.python/py-xmethods.cc: Add global function call counters and
        increment them in their respective functions.  Remove "cout"
        statements.
        * gdb.python/py-xmethods.exp: Make tests check the global function
        call counters instead of depending on inferior IO.

2014-06-18  Don Breazeal  <donb@codesourcery.com>

        * gdb.base/foll-fork.exp (default_fork_parent_follow):
        Deleted procedure.
        (explicit_fork_parent_follow): Deleted procedure.
        (explicit_fork_child_follow): Deleted procedure.
        (test_follow_fork): New procedure.
        (do_fork_tests): Replace calls to deleted procedures with
        calls to test_follow_fork and reset GDB for subsequent
        procedure calls.

2014-06-17  Yao Qi  <yao@codesourcery.com>

        * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
        CP1252.

2014-06-17  Luis Machado  <lgustavo@codesourcery.com>

        * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
        Initialize ptr and S explicitly.
        (skip_type_update_when_not_use_rtti_test): Likewise.

2014-06-16  Keith Seitz  <keiths@redhat.com>

        PR mi/15863
        * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
        the inferior is started.

2014-06-16  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-main-file-remove-fail.c: New file.
        * gdb.base/break-main-file-remove-fail.exp: New file.
        * gdb.base/break-unload-file.exp: Use build_executable instead of
        prepare_for_testing.
        (test_break): New parameter "initial_load".  Handle it.
        (top level): Add initial_load cmdline/file axis.

2014-06-12  Tom Tromey  <tromey@redhat.com>

        * gdb.base/completion.exp: Don't use directory name in test.

2014-06-09  Gary Benson  <gbenson@redhat.com>

        * gdb.base/sigall.c [Functions to send signals]: Reorder to
        separate the always-available ANSI-standard signals from the
        signals that require checking.
        (main): Likewise.
        * gdb.reverse/sigall-reverse.c [Functions to send signals]:
        Likewise.
        (main): Likewise.

2014-06-07  Keith Seitz  <keiths@redhat.com>

        Revert:
        PR c++/16253
        * gdb.cp/var-tag.cc: New file.
        * gdb.cp/var-tag.exp: New file.
        * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
        * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
        * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
        * gdb.dwarf2/dw2-inheritance.exp: Likewise.

2014-06-06  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.

2014-06-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
        in target debug output instead of looking at RSP packets,
        disabling the test on any target that uses hardware stepping.
        Update comments.

2014-06-06  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-unload-file.exp: Fix typo.

2014-06-06  Yao Qi  <yao@codesourcery.com>

        * gdb.base/jit.exp (one_jit_test): Restrict the pattern
        from "jit_function" to "^jit_function".

2014-06-06  Yao Qi  <yao@codesourcery.com>

        * gdb.base/async.c (foo): Add one statement.
        * gdb.base/async.exp: Get the next instruction address and
        match the output of "nexti" by instruction address.  Match
        the hex address in the output of "finish".

2014-06-06  Gary Benson  <gbenson@redhat.com>

        * gdb.base/call-signals.c: Remove preprocessor conditionals
        for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
        SIGSEGV and SIGTERM.
        * gdb.base/sigall.c: Likewise.
        * gdb.base/unwindonsignal.c: Likewise.
        * gdb.reverse/sigall-reverse.c: Likewise.

2014-06-06  Yao Qi  <yao@codesourcery.com>

        * gdb.base/hbreak-unmapped.exp: Read memory at address 0.  If
        readable, skip the test.

2014-06-06  Yao Qi  <yao@codesourcery.com>

        * gdb.threads/staticthreads.c (thread_function): Move the line
        setting breakpoint on forward.
        * gdb.threads/staticthreads.exp: Update comments.

2014-06-05  Ludovic Courtès  <ludo@gnu.org>

        * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
        "history-append! type error".

2014-06-05  Simon Marchi  <simon.marchi@ericsson.com>

        * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
        erroneous dprintf expected input.

2014-06-04  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-generics.exp: Delete.

2014-06-04  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-breakpoint.exp: Update.
        Add tests for breakpoint registration.

2014-06-04  Tom Tromey  <tromey@redhat.com>

        * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
        VLA-in-union.
        * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
        inner_vla_struct, vla_union types.  Initialize objects of those
        types and compute their sizes.

2014-06-04  Nathan Sidwell  <nathan@codesourcery.com>
            Hui Zhu  <hui@codesourcery.com>

        * gdb.base/fileio.exp: Add test for shell not available as well as
        available.
        * gdb.base/fileio.c (test_system): Check for shell twice.

2014-06-04  Yao Qi  <yao@codesourcery.com>

        * gdb.base/auto-connect-native-target.exp: Remove redundant
        space from the regexp pattern.

2014-06-04  Yao Qi  <yao@codesourcery.com>

        * gdb.base/default.exp: Replace "child" with "native" in
        regexp pattern.

2014-06-03  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-xmethods.cc: New testcase to test xmethods.
        * gdb.python/py-xmethods.exp: New tests to test xmethods.
        * gdb.python/py-xmethods.py: Python script supporting the
        new testcase and tests.

2014-06-03  Joel Brobecker  <brobecker@adacore.com>
            Pedro Alves  <palves@redhat.com>

        PR breakpoints/17000
        * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
        * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.

2014-06-03  Brad Mouring  <bmouring@ni.com>  (tiny patch)

        * gdb.base/subst.exp: Add tests to verify partial path matching
        output.

2014-06-03  Pedro Alves  <palves@redhat.com>

        * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
        target that doesn't use software single-stepping.

2014-06-03  Pedro Alves  <palves@redhat.com>

        PR breakpoints/17000
        * gdb.base/sss-bp-on-user-bp-2.c: New file.
        * gdb.base/sss-bp-on-user-bp-2.exp: New file.

2014-06-02  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-parameter.exp: New file.

2014-06-02  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-cmd.c: New file.
        * gdb.guile/scm-cmd.exp: New file.

2014-06-02  Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
        pretty-printer lookup.
        * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
        (make-pp_s-printer): Call it.
        (make-pretty-printer-from-dict): New function.
        (lookup-pretty-printer-maker-from-dict): New function.
        (*pretty-printer*): Simplify.
        (make-objfile-pp_s-printer): New function.
        (install-objfile-pretty-printers!): New function.
        (make-progspace-pp_s-printer): New function.
        (install-progspace-pretty-printers!): New function.
        * gdb.guile/scm-progspace.c: New file.
        * gdb.guile/scm-progspace.exp: New file.

2014-06-02  Pedro Alves  <palves@redhat.com>

        * gdb.base/dprintf-bp-same-addr.c: New file.
        * gdb.base/dprintf-bp-same-addr.exp: New file.

2014-06-02  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
        * gdb.arch/powerpc-power.s: Likewise.

2014-06-02  Joel Brobecker  <brobecker@adacore.com>

        * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.

2014-06-01  Yao Qi  <yao@codesourcery.com>

        * gdb.base/watchpoint.exp (test_watch_location): Check null
        pointer can be dereferenced.  If not, do the test, otherwise
        skip it.

2014-05-30  Andrew Burgess  <aburgess@broadcom.com>

        * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
        results.
        * gdb.arch/amd64-invalid-stack-top.exp: Likewise.

2014-05-30  Andrew Burgess  <aburgess@broadcom.com>

        * gdb.arch/amd64-invalid-stack-middle.S: New file.
        * gdb.arch/amd64-invalid-stack-middle.c: New file.
        * gdb.arch/amd64-invalid-stack-middle.exp: New file.
        * gdb.arch/amd64-invalid-stack-top.c: New file.
        * gdb.arch/amd64-invalid-stack-top.exp: New file.

2014-05-30  Pedro Alves  <palves@redhat.com>

        PR breakpoints/17000
        * gdb.base/sss-bp-on-user-bp.c: New file.
        * gdb.base/sss-bp-on-user-bp.exp: New file.

2014-05-30  David Blaikie  <dblaikie@gmail.com>

        * gdb.opt/inline-break.c: Fix clang compatibility by specifying
        gnu_inline semantics via attribute.
        * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
        source explicitly specifies the required semantics.

2014-05-30  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.reverse/sigall-reverse.exp: Fix a typo.

2014-05-29  Pedro Alves  <palves@redhat.com>
            Tom Tromey  <tromey@redhat.com>

        * gdb.base/async-shell.exp: Don't enable target-async.
        * gdb.base/async.exp
        * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
        parameter.  Adjust.
        (top level): Don't test with "target-async".
        * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
        * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
        * gdb.base/inferior-died.exp: Don't enable target-async.
        * gdb.base/interrupt-noterm.exp: Likewise.
        * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
        * gdb.mi/mi-nonstop-exit.exp: Likewise.
        * gdb.mi/mi-nonstop.exp: Likewise.
        * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
        * gdb.mi/mi-nsintrall.exp: Likewise.
        * gdb.mi/mi-nsmoribund.exp: Likewise.
        * gdb.mi/mi-nsthrexec.exp: Likewise.
        * gdb.mi/mi-watch-nonstop.exp: Likewise.
        * gdb.multi/watchpoint-multi.exp: Adjust comment.
        * gdb.python/py-evsignal.exp: Don't enable target-async.
        * gdb.python/py-evthreads.exp: Likewise.
        * gdb.python/py-prompt.exp: Likewise.
        * gdb.reverse/break-precsave.exp: Don't test with "target-async".
        * gdb.server/solib-list.exp: Don't enable target-async.
        * gdb.threads/thread-specific-bp.exp: Likewise.
        * lib/mi-support.exp: Adjust to use mi-async.

2014-05-29  Pedro Alves  <palves@redhat.com>

        PR gdb/13860
        * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
        reason, even in sync mode.

2014-05-29  Pedro Alves  <palves@redhat.com>
            Hui Zhu  <hui@codesourcery.com>

        PR PR15693
        * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
        * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
        * gdb.mi/mi-condbreak-call-thr-state.c: New file.
        * gdb.mi/mi-condbreak-call-thr-state.exp: New file.

2014-05-28  Joel Brobecker  <brobecker@adacore.com>

        * config/monitor.exp (gdb_target_monitor): Replace use of
        "set remotebaud" by "set serial baud".

2014-05-26  Andy Wingo  <wingo@igalia.com>

        * gdb.guile/scm-breakpoint.exp:
        * gdb.guile/scm-gsmob.exp: Update to use plain old object
        properties instead of gdb-object-properties.

2014-05-26  Yao Qi  <yao@codesourcery.com>

        * gdb.server/no-thread-db.exp: Specify source file name
        explicitly when setting a breakpoint.

2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/vdso.c: New.
        * gdb.btrace/vdso.exp: New.

2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.base/gcore.exp (capture_command_output): Move ...
        * lib/gdb.exp (capture_command_output): ... here.

2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/data.exp: Test memory access during btrace replay.

2014-05-22  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/mi-support.exp (mi_run_cmd_full): Add comments.

2014-05-21  Pedro Alves  <palves@redhat.com>

        PR gdb/13860
        * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
        (top level): Test that output related to execution commands is
        sent to the console with CLI commands, but not with MI commands.
        Test that breakpoint events are always mirrored to the console.
        Also expect the new source line to be output after a "next" in
        async mode too.  Make it a pass/fail test.
        * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
        output.
        * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.

2014-05-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/list.exp (build_pattern, test_list): New procedures.
        Use them to test variations of "list" after reaching a breakpoint.
        * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
        Test "list" with listsize 10 after reaching a breakpoint.
        * gdb.python/python.exp (decode_line current location line
        number): Adjust expected line number.

2014-05-21  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/mi-support.exp (mi_run_cmd_full): Revert to original
        behavior for $args, pass it directly to "run".

2014-05-21  Maciej W. Rozycki  <macro@codesourcery.com>

        * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
        30000 to 65536.

2014-05-21  Pedro Alves  <palves@redhat.com>

        * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
        auto-connect-native-target off".
        * gdb.base/auto-connect-native-target.c: New file.
        * gdb.base/auto-connect-native-target.exp: New file.

2014-05-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp: Test "target native" instead of "target
        child".

2014-05-21  Mark Wielaard  <mjw@redhat.com>

        * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.

2014-05-21  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix TLS access for -static -pthread.
        * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
        <HAVE_TLS> (thread_function, main): Initialize it.
        * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
        Add clean_restart.
        <$have_tls != "">: Check TLSVAR.

2014-05-21  Pedro Alves  <palves@redhat.com>

        * gdb.base/dcache-line-read-error.c: New.
        * gdb.base/dcache-line-read-error.exp: New.

2014-05-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/compare-sections.c: New file.
        * gdb.base/compare-sections.exp: New file.

2014-05-20  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-idempotent.c: New file.
        * gdb.base/break-idempotent.exp: New file.

2014-05-20  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/nohist.exp: New.

2014-05-20  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (gdb_init): Set timeout if test file is under
        gdb.reverse directory and gdb_reverse_timeout exists in board
        setting.
        * README: Document gdb_reverse_timeout.

2014-05-20  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
        'test_file_name'.  Treat args as a string instead of a list.
        (gdb_init): Rename argument 'args' by 'test_file_name'.

2014-05-19  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.arch/powerpc-power.exp: New file.
        * gdb.arch/powerpc-power.s: New file.

2014-05-16  Doug Evans  <dje@google.com>

        * gdb.base/Makefile.in (EXECUTABLES): Add completion.
        * gdb.base/completion.exp: Check that all expected files exist
        before doing file completion.

2014-05-16  Doug Evans  <dje@google.com>

        * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
        Update.
        (do_syscall_tests_without_xml): Update.

2014-05-16  Pedro Alves  <palves@redhat.com>

        * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
        instead of "unknown output after running".

2014-05-16  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host.  Remove
        file1.txt from host at the end.
        * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.

2014-05-15  Doug Evans  <dje@google.com>

        * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
        * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
        loading file.  Add test for TU lookup.

2014-05-15  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
        calling "-exec-arguments" or "set args" before running the
        inferior.

2014-05-15  Simon Marchi  <simon.marchi@ericsson.com>

        * lib/mi-support.exp (mi_expect_stop): Expect message for
        inferiors that exit with non-zero exit code.

2014-05-14  Yao Qi  <yao@codesourcery.com>

        * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
        match absolute path on remote host.
        (test_file_list_exec_source_files): Remove "/" from the
        pattern.

2014-05-14  Yao Qi  <yao@codesourcery.com>

        * boards/local-remote-host-notty.exp (${board}_file): New
        proc.

2014-05-07  Kyle McMartin  <kyle@redhat.com>

        Pushed by Joel Brobecker  <brobecker@adacore.com>.
        * gdb.arch/aarch64-atomic-inst.c: New file.
        * gdb.arch/aarch64-atomic-inst.exp: New file.

2014-05-07  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
        in current context" too.

2014-05-05  Keith Seitz  <keiths@redhat.com>

        * gdb.linespec/ls-dollar.exp: Add test for linespec
        file:convenience_variable.

2014-05-05  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
        traceframes into tfile and ctf trace files.  Read data from
        trace file and test collected data.
        (gdb_collect_locals_test): Likewise.
        (gdb_unavailable_registers_test): Likewise.
        (gdb_unavailable_floats): Likewise.
        (gdb_collect_globals_test): Likewise.
        (top-level): Append "ctf" to trace_file_targets if GDB
        supports.

2014-05-05  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
        code to ...
        (gdb_collect_args_test_1): ... it.  New proc.
        (gdb_collect_locals_test): Move some code to ...
        (gdb_collect_locals_test_1): ... it.  New proc.
        (gdb_unavailable_registers_test): Move some code to ...
        (gdb_unavailable_registers_test_1): ... it.  New proc.
        (gdb_unavailable_floats): Move some code to ...
        (gdb_unavailable_floats_1): ... it.  New proc.

2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>

        * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
        probes to test for bitness recognition.
        * gdb.arch/amd64-stap-optional-prefix.exp
        (test_probe_value_without_reg): New procedure.
        Add code to test for different kinds of bitness.

2014-05-02  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR breakpoints/16889
        * gdb.arch/amd64-stap-optional-prefix.S: New file.
        * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.

2014-05-01  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_load): Extend comment.  Skip calling
        gdb_file_cmd if no file is specified.
        * boards/native-extended-gdbserver.exp (gdb_load): Use the
        last_loaded_file to set the remote exec-file.

2014-05-01  Pedro Alves  <palves@redhat.com>

        * boards/local-remote-host.exp: New file.

2014-05-01  Pedro Alves  <palves@redhat.com>

        * boards/local-remote-host.exp: Rename to ...
        * boards/local-remote-host-notty.exp: ... this.

2014-04-28  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/dyn_arrayidx: New testcase.

2014-04-26  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dwz.exp: Compile main.c to object.  Restart GDB
        and compute the length of function main.  Save it in
        $main_length.
        (Dwarf::assemble): Use $main_length instead of hard-coded 10.
        (top-level): Use gdb_compile to compile objects into
        executable and restart GDB.  Remove invocation to
        prepare_for_testing.

2014-04-25  Simon Marchi  <simon.marchi@ericsson.com>
            Pedro Alves  <palves@redhat.com>

        PR server/16255
        * gdb.multi/multi-attach.c: New file.
        * gdb.multi/multi-attach.exp: New file.

2014-04-25  Pedro Alves  <palves@redhat.com>

        * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
        user.
        (top level): Test that "set remote conditional-breakpoints-packet
        off" works as intended.
        * gdb.base/dprintf.exp: Test that "set remote
        breakpoint-commands-packet off" works as intended.
        * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
        New function.
        (top level): Call it.
        * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
        remote fast-tracepoints-packet off" works as intended.
        * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
        * lib/gdb.exp (gdb_is_target_remote): ... here.

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
        ensure clang would not discard them.
        * gdb.base/gdbvars.c: Ditto.
        * gdb.base/memattr.c: Ditto.
        * gdb.base/whatis.c: Ditto.
        * gdb.python/py-prettyprint.c: Ditto.
        * gdb.trace/actions.c: Ditto.
        * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
        ensure clang would not discard it.

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
        clang to emit the full definition of type required by the test
        * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
        coax Clang into emitting the definition of the type.
        * gdb.cp/pr10728-x.h (y): Ditto.
        * gdb.cp/pr10728-y.cc (y): Ditto.

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.base/label.exp: XFAIL label related tests under Clang.
        * gdb.cp/cplabel.exp: Ditto.
        * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
        under Clang those using labels.

2014-04-25  Yao Qi  <yao@codesourcery.com>

        * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
        double_label.
        * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
        partial_label and double_label.

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.

2014-04-24  David Blaikie  <dblaikie@gmail.com>

        * gdb.cp/cpexprs.cc: Move braces to the same line as the start
        of the function to work across GCC and Clang.
        * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
        pointer types (const void ** const V void **).

2014-04-24  Michael Sturm  <michael.sturm@mintel.com>
            Walfred Tedeschi  <walfred.tedeschi@intel.com>

        * Makefile.in (EXECUTABLES): Added i386-avx512.
        * gdb.arch/i386-avx512.c: New file.
        * gdb.arch/i386-avx512.exp: Likewise.

2014-04-23  Keith Seitz  <keiths@redhat.com>

        * lib/mi-support.exp (mi_list_breakpoints): Delete.
        (mi_make_breakpoint_table): New procedure.
        (mi_create_breakpoint): Use mi_make_breakpoint
        and return the result.
        (mi_make_breakpoint): New procedure.
        (mi_build_kv_pairs): New procedure.

        * gdb.mi/mi-break.exp: Remove unused globals,
        update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
        All callers updated.
        * gdb.mi/mi-dprintf.exp: Use variable to track command
        number.
        Update all callers of mi_create_breakpoint and use
        mi_make_breakpoint_table.
        Remove any unused global variables.
        * gdb.mi/mi-nonstop.exp: Likewise.
        * gdb.mi/mi-nsintrall.exp: Likewise.
        * gdb.mi/mi-nsmoribund.exp: Likewise.
        * gdb.mi/mi-nsthrexec.exp: Likewise.
        * gdb.mi/mi-reverse.exp: Likewise.
        * gdb.mi/mi-simplerun.exp: Likewise.
        * gdb.mi/mi-stepn.exp: Likewise.
        * gdb.mi/mi-syn-frame.exp: Likewise.
        * gdb.mi/mi-until.exp: Likewise.
        * gdb.mi/mi-var-cp.exp: Likewise.
        * gdb.mi/mi-var-display.exp: Likewise.
        * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
        * gdb.mi/mi2-var-child.exp: Likewise.
        * gdb.mi/mi-vla-c99.exp: Likewise.
        * lib/mi-support.exp: Likewise.

        From Ian Lance Taylor  <iant@cygnus.com>:
        * lib/gdb.exp (parse_args): New procedure.

2014-04-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/break-unload-file.c: New file.
        * gdb.base/break-unload-file.exp: New file.
        * gdb.base/sym-file-lib.c (baz): New function.
        * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
        field.
        (load): Store the segment's mapped size.
        (unload): New function.
        (unload_shlib): New function.
        * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
        * gdb.base/sym-file-main.c (main): Unload, and reload the library,
        set a breakpoint at baz, and call it.
        * gdb.base/sym-file.exp: New tests for stale breakpoint
        instructions.

2014-04-23  Pedro Alves  <palves@redhat.com>

        * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
        * gdb.base/hbreak-in-shr-unsupported.c: New file.
        * gdb.base/hbreak-in-shr-unsupported.exp: New file.
        * gdb.base/hbreak-unmapped.c: New file.
        * gdb.base/hbreak-unmapped.exp: New file.
        * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
        * lib/gdb.exp (gdb_is_target_remote): ... here.

2014-04-22  Pedro Alves  <palves@redhat.com>

        * gdb.base/consecutive-step-over.c: New file.
        * gdb.base/consecutive-step-over.exp: New file.

2014-04-22  Pedro Alves  <palves@redhat.com>

        * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
        instead of send_gdb/gdb_expect.

2014-04-22  Yao Qi  <yao@codesourcery.com>

        * lib/trace-support.exp (generate_tracefile): New procedure.
        * gdb.trace/tfile.exp: Skip the test if generate_tracefile
        return 0.
        * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
        if generate_tracefile returns 1.

2014-04-18  Tom Tromey  <palves@redhat.com>
            Pedro alves  <tromey@redhat.com>

        PR backtrace/15558
        * gdb.opt/inline-bt.exp: Test backtracing from an inline function
        with a backtrace limit.
        * gdb.python/py-frame-inline.exp: Test running to an inline
        function with a backtrace limit, and printing the newest frame.
        * gdb.python/py-frame-inline.c (main): Call f.

2014-04-17  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * gdb.java/jnpe.exp: Drop srcdir from untested path.

2014-04-17  Marcus Shawcroft  <marcus.shawcroft@arm.com>

        * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
        Drop prefix from unsupported source file path.

2014-04-17  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (with_target_charset): New proc.
        * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
        with_target_charset.
        (test_print_strings): Likewise.
        (test_repeat_bytes): Likewise.
        * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
        for some tests.

2014-04-16  Keith Seitz  <keiths@redhat.com>

        PR gdb/15827
        * gdb.dwarf2/corrupt.c: New file.
        * gdb.dwarf2/corrupt.exp: New file.

2014-04-16  Keith Seitz  <keiths@redhat.com>

        PR c++/16597
        * gdb.cp/namelessclass.cc: New file.
        * gdb.cp/namelessclass.exp: New file.
        * gdb.cp/namelessclass.S: New file.

2014-04-16  Doug Evans  <dje@google.com>

        * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
        Add comment.
        (gdbserver_default_get_comm_port): New function.
        (gdbserver_start): Check if board file provided
        "gdbserver,get_comm_port" and use it if so.
        * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
        (gdb,socketport): Set to "stdio".
        (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
        (stdio_gdbserver_template): Delete.
        (${board}_get_remote_address): Update.
        (${board}_build_remote_cmd): Delete.
        (${board}_get_comm_port): New function.
        (${board}_spawn): Update.
        * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
        Delete.
        (${board}_get_remote_address): Update.
        (${board}_get_comm_port): New function.

2014-04-16  Andrew Burgess  <aburgess@broadcom.com>

        * gdb.base/memattr.exp: Improve regexps to handle memory regions
        appearing in any order.

2014-04-15  Doug Evans  <dje@google.com>

        * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
        uninitialized value of "description".

2014-04-15  Keith Seitz  <keiths@redhat.com>

        * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
        Remove unused globals.
        (test_running_the_program): Likewise.
        (test_controlled_execution): Likewise.
        (test_controlling_breakpoints): Likewise.
        (test_program_termination): Likewise.

2014-04-15  Keith Seitz  <keiths@redhat.com>

        * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
        unused globals.
        (test_rbreak_creation_and_listing): Likewise.
        (test_ignore_count): Likewise.
        (test_error): Likewise.

2014-04-15  Pedro Alves  <palves@redhat.com>

        * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
        <ansidecl.h>, <elf/common.h> and <elf/external.h> to
        sym-file-loader.c.
        (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
        (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
        to sym-file-loader.c.
        (struct library): Forward declare.
        (load_shlib, lookup_function): Change prototypes.
        (find_shstrtab, find_strtab, find_shdr, find_symtab)
        (translate_offset): Remove declarations.
        (get_text_addr): New declaration.
        * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
        <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
        sym-file-loader.h.
        (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
        (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
        here from sym-file-loader.h.
        (struct library): New structure.
        (load_shlib, lookup_function): Change prototypes and adjust to
        work with a struct library.
        (find_shstrtab, find_strtab, find_shdr, find_symtab)
        (translate_offset): Make static.
        (get_text_addr): New function.
        * gdb.base/sym-file-main.c (main): Adjust to new loader interface.

2014-04-15  Pedro Alves  <palves@redhat.com>

        * gdb.base/sym-file-loader.c: Fix typo.  SELF_LINK, not SELK_LINK.

2014-04-15  Pedro Alves  <palves@redhat.com>

        * gdb.base/sym-file-loader.c: Include <limits.h>.
        (SELF_LINK): New define.
        (get_origin): New function.
        (load_shlib): Use it.
        * gdb.base/sym-file.exp: Don't early return if the target is
        remote.  Use runto_main, and issue fail is that fails.  Use
        gdb_load_shlibs.
        (shlib_name): Delete.
        (lib_so, lib_syms, lib_dlopen): New globals.  Use them throughout.

2014-04-15  Pedro Alves <palves@redhat.com>

        * gdb.base/sym-file.exp: Remove regex characters from test
        message.  Don't refer to breakpoint numbers in test messages.

2014-04-14  Keith Seitz  <keiths@redhat.com>

        PR c++/16253
        * gdb.cp/var-tag.cc: New file.
        * gdb.cp/var-tag.exp: New file.
        * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
        * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
        * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
        * gdb.dwarf2/dw2-inheritance.exp: Likewise.

2014-04-14  Tom Tromey  <tromey@redhat.com>

        * gdb.cp/classes.exp (test_enums): Handle underlying type.
        * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
        type.
        * gdb.cp/enum-class.exp: New file.
        * gdb.cp/enum-class.cc: New file.

2014-04-14  Tom Tromey  <tromey@redhat.com>

        * gdb.dwarf2/enum-type.exp: New file.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.mi/mi-vla-c99.exp: New file.
        * gdb.mi/vla.c: New file.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-datatypes.c: New file.
        * gdb.base/vla-datatypes.exp: New file.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-ptr.c: New file.
        * gdb.base/vla-ptr.exp: New file.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.dwarf2/count.exp: New file.

2014-04-14  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-sideeffect.c: New file.
        * gdb.base/vla-sideeffect.exp: New file.

2014-04-14  David Blaikie <dblaikie@gmail.com>

        * gdb.mi/non-stop.c: Add return value for non-void function return
        statement.
        * gdb.threads/staticthreads.c: Ditto.

2014-04-12  Siva Chandra Reddy  <sivachandra@google.com>
            Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-value.c: Improve test case.
        * gdb.guile/scm-value.exp: Add new test.

2014-04-11  David Blaikie  <dblaikie@gmail.com>

        * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
        override Clang's default.

2014-04-11  Joel Brobecker  <brobecker@adacore.com>

        Revert the following changes (regressions):

        * gdb.base/vla-sideeffect.c: New file.
        * gdb.base/vla-sideeffect.exp: New file.

        * gdb.dwarf2/count.exp: New file.

        * gdb.base/vla-multi.c: New file.
        * gdb.base/vla-multi.exp: New file.

        * gdb.base/vla-ptr.c: New file.
        * gdb.base/vla-ptr.exp: New file.

        * gdb.base/vla-datatypes.c: New file.
        * gdb.base/vla-datatypes.exp: New file.

        * gdb.mi/mi-vla-c99.exp: New file.
        * gdb.mi/vla.c: New file.

2014-04-11  Keith Seitz  <keiths@redhat.com>

        PR c++/16675
        * gdb.cp/cpsizeof.exp: New file.
        * gdb.cp/cpsizeof.cc: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.mi/mi-vla-c99.exp: New file.
        * gdb.mi/vla.c: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-datatypes.c: New file.
        * gdb.base/vla-datatypes.exp: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-ptr.c: New file.
        * gdb.base/vla-ptr.exp: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-multi.c: New file.
        * gdb.base/vla-multi.exp: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.dwarf2/count.exp: New file.

2014-04-11  Sanimir Agovic  <sanimir.agovic@intel.com>

        * gdb.base/vla-sideeffect.c: New file.
        * gdb.base/vla-sideeffect.exp: New file.

2014-04-11  Yao Qi  <yao@codesourcery.com>

        * gdb.base/completion.exp: Check file exists before running tests
        on file completion.

2014-04-10  Pedro Alves  <palves@redhat.com>

        * gdb.base/cond-eval-mode.c: New file.
        * gdb.base/cond-eval-mode.exp: Use standard_testfile.  Adjust
        prepare_for_testing to build the new file.  Check result of
        runto_main.
        (test_break, test_watch): New procedures.
        (top level): Use them.

2014-04-08  Pierre Muller  <muller@sourceware.org>

        * gdb.base/printcmds.exp (test_artificial_arrays): Disable
        Ctrl-V use for mingw hosts.

2014-04-07  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-value.c: Improve test case.
        * gdb.python/py-value.exp: Add new test.

2014-04-07  David Blaikie  <dblaikie@gmail.com>

        * lib/compiler.c: Identify the clang compiler.
        * lib/compiler.cc: Ditto.

2014-04-03  Yao Qi  <yao@codesourcery.com>

        * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.

2014-04-01  Anton Blanchard  <anton@samba.org>

        * gdb.arch/ppc64-atomic-inst.exp: Use untested.  Make test
        messages unique.

2014-04-01  Anton Blanchard  <anton@samba.org>

        * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
        prepare_for_testing.

2014-04-01  Anton Blanchard  <anton@samba.org>

        * gdb.arch/ppc64-atomic-inst.c: Remove.
        * gdb.arch/ppc64-atomic-inst.S: New file.
        * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.

2014-03-31  Doug Evans  <dje@google.com>

        * gdb.base/print-symbol-loading-lib.c: New file.
        * gdb.base/print-symbol-loading-main.c: New file.
        * gdb.base/print-symbol-loading.exp: New file.

2014-03-31  Yao Qi  <yao@codesourcery.com>

        * gdb.base/source-dir.exp: Allow ';' as a directory separator.

2014-03-28  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_dyn_arr: New testcase.

2014-03-27  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".

2014-03-27  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
        if target is nios2-*-*.

2014-03-26  Yao Qi  <yao@codesourcery.com>

        * lib/gdb.exp (readline_is_used): New proc.
        * gdb.base/completion.exp: Move tests on command complete up.
        Skip the rest of tests if readline is not used.
        * gdb.ada/complete.exp: Skp the test if readline is not
        used.
        * gdb.base/filesym.exp: Likewise.
        * gdb.base/macscp.exp: Likewise.
        * gdb.base/readline-ask.exp: Likewise.
        * gdb.base/readline.exp: Likewise.
        * gdb.python/py-cmd.exp: Likewise.
        * gdb.trace/tfile.exp: Likewise.

2014-03-26  Yao Qi  <yao@codesourcery.com>

        * gdb.base/macscp.exp: Fix code format issues.

2014-03-25  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
        * gdb.asm/powerpc64le.inc: New file.

2014-03-25  Pedro Alves  <palves@redhat.com>
            Doug Evans  <dje@google.com>

        * gdb.base/source-execution.c: New file.
        * gdb.base/source-execution.exp: New file.
        * gdb.base/source-execution.gdb: New file.

2014-03-24  Doug Evans  <dje@google.com>

        * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
        using fission.

2014-03-24  Hui Zhu  <hui@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        PR breakpoints/16101
        * gdb.base/dprintf.exp: Use unsupported rather than changing the
        test pass/fail messages.  Detect missing support for dprintf when
        breakpoints are actually inserted.
        * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
        breakpoints are actually inserted.
        * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
        fails.

2014-03-24  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".

2014-03-22  Doug Evans  <xdje42@gmail.com>

        * gdb.python/python.exp (python not supported): Verify multi-line
        python command issues an error.
        * gdb.guile/guile.exp (guile not supported): Verify multi-line
        guile command issues an error.

2014-03-21  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.threads/thread-specific.exp: Handle the lack of usable
        $this_breakpoint and $this_thread.

2014-03-21  Hui Zhu  <hui@codesourcery.com>

        * gdb.base/attach.exp (do_command_attach_tests): New.

2014-03-20  Tom Tromey  <tromey@redhat.com>
            Pedro Alves  <palves@redhat.com>

        PR cli/15718
        * gdb.base/condbreak-call-false.c: New file.
        * gdb.base/condbreak-call-false.exp: New file.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
        Delete.
        (block_signals, unblock_signals): Delete.
        (child_function_2, main): Remove references to deleted variable
        and functions.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
        Use pthread_kill to signal thread 2.
        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
        Adjust to make the test send itself a signal rather than using the
        host's "kill" command.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/multiple-step-overs.c: New file.
        * gdb.threads/multiple-step-overs.exp: New file.
        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
        Adjust expected infrun debug output.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-trips-on-watchpoint.c: New file.
        * gdb.threads/step-over-trips-on-watchpoint.exp: New file.

2014-03-20  Pedro Alves  <palves@redhat.com>

        PR breakpoints/7143
        * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
        old gnats gdb/38.  Remove kfail.  Adjust to use gdb_test instead
        of gdb_test_multiple.
        * gdb.cp/annota2.exp: Remove kfail for gdb/38.
        * gdb.cp/annota3.exp: Remove kfail for gdb/38.

2014-03-20  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-over-lands-on-breakpoint.c: New file.
        * gdb.threads/step-over-lands-on-breakpoint.exp: New file.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp: Remove early return.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp (step& tests): Pass explicit test messages.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp (test_background): Expect \r\n after
        "completed." in the fail pattern.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp (test_background): New procedure.
        Use it for all background execution command tests.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp: Use prepare_for_testing.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.c (foo): Make 'x' volatile.  Write to it twice in
        the same line.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.c (main): Add "jump here" and "until here" line
        marker comments.
        * gdb.base/async.exp (jump_here): New global.
        (jump& test): Use it.
        (until_here): New global.
        (until& test): Use it.

2014-03-19  Pedro Alves  <palves@redhat.com>

        * gdb.base/async.exp: Don't frob gdb_protocol.

2014-03-18  Doug Evans  <xdje42@gmail.com>

        * gdb.base/async.exp: Whitespace fixes.  Turn on target-async.
        Fix spelling of exec-done-display.

2014-03-18  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/15358
        * gdb.base/gdb-sigterm.c: New file.
        * gdb.base/gdb-sigterm.exp: New file.

2014-03-18  Pedro Alves  <palves@redhat.com>

        PR gdb/13860
        * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
        * lib/mi-support.exp (mi_expect_stop): Add special handling for
        solib-event.

2014-03-17  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pckd_arr_ren: New testcase.

2014-03-13  Doug Evans  <xdje42@gmail.com>

        PR guile/16612
        * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
        collect after discarding symbols.

2014-03-13  Ludovic Courtès  <ludo@gnu.org>
            Doug Evans  <xdje42@gmail.com>

        * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
        to history survives a gc.

2014-03-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp: Don't test "target procfs".

2014-03-13  Pedro Alves  <palves@redhat.com>

        * gdb.base/default.exp: Update "target child" and "target procfs"
        tests to not expect "Unix".

2014-03-12  Tom Tromey  <tromey@redhat.com>

        * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
        New procs.  Add target-async tests.
        * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
        Add target-async tests.

2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
        'func_start' and 'func_end' for the beginning and end of the
        function code, respectively.
        * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
        'func_end' instead of 'func' and 'main'.

2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
        * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
        generate the debug info assembler source.

2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
        * gdb.dwarf2/arr-subrange.exp: Likewise.
        * gdb.dwarf2/dwz.exp: Likewise.
        * gdb.dwarf2/method-ptr.exp: Likewise.
        * gdb.dwarf2/missing-sig-type.exp: Likewise.
        * gdb.dwarf2/subrange.exp: Likewise.
        * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
        * gdb.dwarf2/implptrpiece.exp: Likewise.
        * gdb.dwarf2/nostaticblock.exp: Likewise.

2014-03-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>

        * lib/gdb.exp (build_executable_from_specs): Don't prepend source
        directory to absolute path name arguments.

2014-03-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/tagged_access: New testcase.

2014-03-07  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/data.exp: Update expected output.

2014-03-06  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/pr16508.exp: New file.

2014-03-05  Pedro Alves  <palves@redhat.com>

        PR gdb/16575
        * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
        procedure.
        (top level): Adjust to use it.  Add tests that exercise breakpoint
        interaction with the code-cache.

2014-02-26  Ludovic Courtès  <ludo@gnu.org>

        * gdb.guile/scm-value.exp (test_value_in_inferior): Add
        test for 'history-append!'.

2014-02-26  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
        * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
        * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.

2014-02-26  Joel Brobecker  <brobecker@adacore.com>

        * testsuite/gdb.python/py-pp-re-notag.c: New file.
        * testsuite/gdb.python/py-pp-re-notag.ex: New file.
        * testsuite/gdb.python/py-pp-re-notag.p: New file.

2014-02-26  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.

2014-02-26  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/arr-stride.c: New file.
        * gdb.dwarf2/arr-stride.exp: New file.

2014-02-26  Pedro Alves  <palves@redhat.com>

        * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
        that won't ever trigger.  Make sure that GDB reports the correct
        breakpoint that caused the stop.

2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        PR gdb/16626
        * gdb.base/auto-load-script: New file.
        * gdb.base/auto-load.c: New file.
        * gdb.base/auto-load.exp: New file.

        PR gdb/16626
        * gdb.base/auto-load.exp: Fix out-of-srctree run.

2014-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix dw2-icycle.exp -fsanitize=address GDB crash.
        * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.

2014-02-24  Doug Evans  <dje@google.com>

        * lib/gdb.exp (run_on_host): Log error output if program fails.

2014-02-21  Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-after-sr-lock.c: Rename to ...
        * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
        * gdb.threads/step-after-sr-lock.exp: Rename to ...
        * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
        ... this.

2014-02-20  Sergio Durigan Junior  <sergiodj@redhat.com>

        PR tdep/16397
        * gdb.arch/amd64-stap-special-operands.exp: New file.
        * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
        * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
        * gdb.arch/amd64-stap-triplet.S: Likewise.
        * gdb.arch/amd64-stap-triplet.c: Likewise.

2014-02-20  Joel Brobecker  <brobecker@adacore.com>

        * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
        in .section pseudo-op.

2014-02-20  lin zuojian  <manjian2006@gmail.com>
            Joel Brobecker  <brobecker@adacore.com>
            Doug Evans  <xdje42@gmail.com>

        PR symtab/16581
        * gdb.dwarf2/dw2-icycle.S: New file.
        * gdb.dwarf2/dw2-icycle.c: New file.
        * gdb.dwarf2/dw2-icycle.exp: New file.

2014-02-19  Siva Chandra Reddy  <sivachandra@google.com>

        * gdb.python/py-value-cc.cc: Improve test case to enable testing
        operations on gdb.Value objects.
        * gdb.python/py-value-cc.exp: Add new test to test operations on
        gdb.Value objects.

2014-02-18  Doug Evans  <dje@google.com>

        * Makefile.in (TESTS): New variable.
        (expanded_tests, expanded_tests_or_none): New variables
        (check-single): Pass $(expanded_tests_or_none) to runtest.
        (check-parallel): Only run tests in $(TESTS) if non-empty.
        (check/no-matching-tests-found): New rule.
        * README: Document TESTS makefile variable.

2014-02-18  Doug Evans  <dje@google.com>

        * Makefile.in (check-parallel): rm -rf outputs temp.

2014-02-16  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix "ERROR: no fileid for" in the testsuite.
        * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.

2014-02-12  Doug Evans  <dje@google.com>

        * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
        (MISCELLANEOUS): New variable.
        (clean): rm -rf $(MISCELLANEOUS).
        * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
        dwp live in the same directory as symlinks, with each symlink pointed
        to a differently named file in a different directory.

2014-02-11  Doug Evans  <dje@google.com>

        * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
        of Tcl file commands.

2014-02-10  Mark Kettenis  <kettenis@gnu.org>

        * gdb.threads/step-after-sr-lock.exp: Avoid executing
        "kill -SIGUSR1 -1".

2014-02-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/tick_length_array_enum_idx: New testcase.

2014-02-10  Doug Evans  <xdje42@gmail.com>

        * configure.ac (AC_OUTPUT): Add gdb.guile.
        * configure: Regenerate.
        * lib/gdb-guile.exp: New file.
        * lib/gdb.exp (get_target_charset): New function.
        * gdb.base/help.exp: Update expected output from "apropos apropos".
        * gdb.guile/Makefile.in: New file.
        * gdb.guile/guile.exp: New file.
        * gdb.guile/scm-arch.c: New file.
        * gdb.guile/scm-arch.exp: New file.
        * gdb.guile/scm-block.c: New file.
        * gdb.guile/scm-block.exp: New file.
        * gdb.guile/scm-breakpoint.c: New file.
        * gdb.guile/scm-breakpoint.exp: New file.
        * gdb.guile/scm-disasm.c: New file.
        * gdb.guile/scm-disasm.exp: New file.
        * gdb.guile/scm-equal.c: New file.
        * gdb.guile/scm-equal.exp: New file.
        * gdb.guile/scm-error.exp: New file.
        * gdb.guile/scm-error.scm: New file.
        * gdb.guile/scm-frame-args.c: New file.
        * gdb.guile/scm-frame-args.exp: New file.
        * gdb.guile/scm-frame-args.scm: New file.
        * gdb.guile/scm-frame-inline.c: New file.
        * gdb.guile/scm-frame-inline.exp: New file.
        * gdb.guile/scm-frame.c: New file.
        * gdb.guile/scm-frame.exp: New file.
        * gdb.guile/scm-generics.exp: New file.
        * gdb.guile/scm-gsmob.exp: New file.
        * gdb.guile/scm-iterator.c: New file.
        * gdb.guile/scm-iterator.exp: New file.
        * gdb.guile/scm-math.c: New file.
        * gdb.guile/scm-math.exp: New file.
        * gdb.guile/scm-objfile-script-gdb.in: New file.
        * gdb.guile/scm-objfile-script.c: New file.
        * gdb.guile/scm-objfile-script.exp: New file.
        * gdb.guile/scm-objfile.c: New file.
        * gdb.guile/scm-objfile.exp: New file.
        * gdb.guile/scm-ports.exp: New file.
        * gdb.guile/scm-pretty-print.c: New file.
        * gdb.guile/scm-pretty-print.exp: New file.
        * gdb.guile/scm-pretty-print.scm: New file.
        * gdb.guile/scm-section-script.c: New file.
        * gdb.guile/scm-section-script.exp: New file.
        * gdb.guile/scm-section-script.scm: New file.
        * gdb.guile/scm-symbol.c: New file.
        * gdb.guile/scm-symbol.exp: New file.
        * gdb.guile/scm-symtab-2.c: New file.
        * gdb.guile/scm-symtab.c: New file.
        * gdb.guile/scm-symtab.exp: New file.
        * gdb.guile/scm-type.c: New file.
        * gdb.guile/scm-type.exp: New file.
        * gdb.guile/scm-value-cc.cc: New file.
        * gdb.guile/scm-value-cc.exp: New file.
        * gdb.guile/scm-value.c: New file.
        * gdb.guile/scm-value.exp: New file.
        * gdb.guile/source2.scm: New file.
        * gdb.guile/types-module.cc: New file.
        * gdb.guile/types-module.exp: New file.

2014-02-10  Yao Qi  <yao@codesourcery.com>

        PR testsuite/16543
        * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
        * configure: Regenerated.
        * Makefile.in: New file.

2014-02-08  Andreas Schwab  <schwab@linux-m68k.org>

        * gdb.python/py-framefilter.exp: Fix typo.

2014-02-08  Yao Qi  <yao@codesourcery.com>

        * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
        that no =breakpoint-modified is emitted when breakpoints are
        modified through MI commands.

2014-02-07  Pedro Alves  <pedro@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.threads/step-after-sr-lock.c: New file.
        * gdb.threads/step-after-sr-lock.exp: New file.

2014-02-07  Pedro Alves  <palves@redhat.com>

        * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.

2014-02-06  Jan Kratochvil  <jan.kratochvil@redhat.com>

        Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
        * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.

2014-02-06  Doug Evans  <xdje42@gmail.com>

        * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
        output.

        * gdb.gdb/python-interrupts.exp: New file.

2014-02-05  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/report.exp (use_collected_data): Test the output
        of "info threads" and "info inferiors".

2014-02-05  Yao Qi  <yao@codesourcery.com>

        Revert this patch:

        2013-05-24  Yao Qi  <yao@codesourcery.com>

        * gdb.trace/tfile.exp: Test inferior and thread.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
        on a function.
        * gdb.base/step-bt.c: Call hello via function pointer to make
        sure its first instruction is executed on powerpc64le-linux.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/vsx-regs.exp: Check target endianness.  Provide variants
        of the test patterns for use on little-endian systems.

2014-02-04  Ulrich Weigand  <uweigand@de.ibm.com>

        * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
        (decimal_vector): Fix for little-endian.

2014-01-29  Jose E. Marchesi  <jose.marchesi@oracle.com>

        * gdb.arch/sparc-sysstep.exp: New file.
        * gdb.arch/sparc-sysstep.c: Likewise.

        * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.

2014-01-28  Edjunior Barbosa Machado  <emachado@linux.vnet.ibm.com>

        * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        * gdb.ada/array_char_idx: New testcase.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        PR python/16487:
        * gdb.python/py-framefilter.exp: Add test using "Error" filter.
        * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
        classes.

2014-01-23  Tom Tromey  <tromey@redhat.com>

        PR python/16491:
        * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
        string from an inferior frame.
        * gdb.python/py-framefilter-mi.exp: Update.

2014-01-22  Doug Evans  <dje@google.com>

        * gdb.server/server-mon.exp: Add tests for "set debug-format".

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * gdb.base/catch-syscall.exp: Activate test on s390*-linux.

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * gdb.trace/entry-values.exp: Remove excess space character from
        regex patterns.  Handle s390 call instruction.

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
        define "*_start" label.  Make "name" static.
        * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
        ${name} by references to ${name}_start.

2014-01-22  Andreas Arnez  <arnez@vnet.linux.ibm.com>

        * gdb.base/info-macros.exp: Remove "debug" from the compile
        options.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/demangle.exp: New file.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb.dlang/primitive-types.exp: New file.

2014-01-17  Iain Buclaw  <ibuclaw@gdcproject.org>

        * configure.ac: Create gdb.dlang/Makefile.
        * configure: Regenerate.
        * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
        * gdb.dlang/Makefile.in: New file.
        * lib/d-support.exp: New file.
        * lib/gdb.exp (skip_d_tests): New proc.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/delta.exp: Check reverse stepi.
        * gdb.btrace/tailcall.exp: Update.  Add stepping tests.
        * gdb.btrace/finish.exp: New.
        * gdb.btrace/next.exp: New.
        * gdb.btrace/nexti.exp: New.
        * gdb.btrace/record_goto.c: Add comments.
        * gdb.btrace/step.exp: New.
        * gdb.btrace/stepi.exp: New.
        * gdb.btrace/multi-thread-step.c: New.
        * gdb.btrace/multi-thread-step.exp: New.
        * gdb.btrace/rn-dl-bind.c: New.
        * gdb.btrace/rn-dl-bind.exp: New.
        * gdb.btrace/data.c: New.
        * gdb.btrace/data.exp: New.
        * gdb.btrace/Makefile.in (EXECUTABLES): Add new.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
        * gdb.btrace/exception.exp: Update.
        * gdb.btrace/instruction_history.exp: Update.
        * gdb.btrace/record_goto.exp: Update.
        * gdb.btrace/tailcall.exp: Update.
        * gdb.btrace/unknown_functions.exp: Update.
        * gdb.btrace/delta.exp: New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/record_goto.exp: Add backtrace test.
        * gdb.btrace/tailcall.exp: Add backtrace test.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
        * gdb.btrace/record_goto.c: New.
        * gdb.btrace/record_goto.exp: New.
        * gdb.btrace/x86-record_goto.S: New.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/function_call_history.exp: Update tests.
        * gdb.btrace/instruction_history.exp: Update tests.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/function_call_history.exp: Fix expected field
        order for "record function-call-history".
        Add new tests for "record function-call-history /c".
        * gdb.btrace/exception.cc: New.
        * gdb.btrace/exception.exp: New.
        * gdb.btrace/tailcall.exp: New.
        * gdb.btrace/x86-tailcall.S: New.
        * gdb.btrace/x86-tailcall.c: New.
        * gdb.btrace/unknown_functions.c: New.
        * gdb.btrace/unknown_functions.exp: New.
        * gdb.btrace/Makefile.in (EXECUTABLES): Add new.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/instruction_history.exp: Update.
        * gdb.btrace/function_call_history.exp: Update.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/function_call_history.exp: Fix expected function
        trace.
        * gdb.btrace/instruction_history.exp: Initialize traced.
        Remove traced_functions.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/function_call_history.exp: Update
        * gdb.btrace/instruction_history.exp: Update.

2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>

        * gdb.btrace/enable.exp: Update expected text.

2014-01-16  Omair Javaid  <Omair.Javaid@linaro.org>

        * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
        bytes.

2014-01-15  Maciej W. Rozycki  <macro@codesourcery.com>

        * gdb.base/float.exp: Handle "aarch64*-*-*" targets.

2014-01-15  Omair Javaid  <omair.javaid@linaro.org>

        * lib/gdb.exp (supports_process_record): Return true for
        arm*-linux*.  (supports_reverse): Likewise.

2014-01-13  Siva Chandra Reddy  <sivachandra@google.com>

        PR python/15464
        PR python/16113
        * gdb.python/py-type.c: Enhance test case.
        * gdb.python/py-value-cc.cc: Likewise
        * gdb.python/py-type.exp: Add new tests.
        * gdb.python/py-value-cc.exp: Likewise

2014-01-10  Andreas Arnez  <arnez@linux.vnet.ibm.com>
            Pedro Alves <palves@redhat.com>

        * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
        Make "name" extern.
        * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
        references to ${name}_start by references to ${name}.

2014-01-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pp-rec-component.exp: Remove path from "source" test.

2014-01-10  Joel Brobecker  <brobecker@adacore.com>

        * gdb.python/py-pp-integral.exp: Remove path from "source" test.

2014-01-09  Maciej W. Rozycki  <macro@codesourcery.com>
            Pedro Alves  <palves@redhat.com>

        * gdb.mi/mi-info-os.exp: Connect to the target with
        mi_gdb_target_load.

2014-01-08  Pedro Alves  <palves@redhat.com>

        * gdb.threads/reconnect-signal.c: New file.
        * gdb.threads/reconnect-signal.exp: New file.

2014-01-07  Jan Kratochvil  <jan.kratochvil@redhat.com>

        * gdb.base/source-dir.exp: New file.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/mi_interface: New testcase.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
        gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
        gdb.ada/pp-rec-component/pck.ads: New files.

2014-01-07  Joel Brobecker  <brobecker@adacore.com>

        * gdb.python/py-pp-integral.c: New file.
        * gdb.python/py-pp-integral.py: New file.
        * gdb.python/py-pp-integral.exp: New file.

For older changes see ChangeLog-1993-2013.
\f
;; Local Variables:
;; mode: change-log
;; left-margin: 8
;; fill-column: 74
;; version-control: never
;; End:

    Copyright 2014-2020 Free Software Foundation, Inc.
  Copying and distribution of this file, with or without modification,
  are permitted provided the copyright notice and this notice are preserved.