* config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd

[deliverable/binutils-gdb.git] / gdb / testsuite / ChangeLog

Tue Jun  3 15:20:20 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd
        here. Call gdb_target_exec before rebooting the target, to make
        sure the connection to the target is closed.
        (gdb_load): Pass the name of the executable to gdb_target_monitor.
        Don't call gdb_file_cmd here; let gdb_target_monitor do it.

        * config/gdbserver.exp: Pass the executable being loaded to
        gdb_target_monitor. Don't call gdb_file_cmd here; let
        gdb_target_monitor do it.

        * gdb.disasm/hppa.exp: Don't use exec_output.

Fri May 23 13:28:29 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/list.exp: If we're debugging a non-native target,
        try to set the pc register to point to the start of the
        program before doing the first list command.

        * gdb.c++/virtfunc.exp(gdb_virtfunc_restart): Make sure we run
        test_calls after restarting.

        * lib/gdb.exp(gdb_run_cmd): Send jump command again after
        reloading.

        * gdb.base/watchpoint.exp: Fix typo.

        * gdb.base/setshow.exp: Check for use_gdb_stub.

        * gdb.base/break.exp: Fix continue until exit test for the gdb
        stub case.
        * gdb.base/langs.exp: Ditto.

        * config/monitor.exp(gdb_load): Handle gdb_sect_offset and
        gdb_load_offset. If we weren't given a file to load, figure out
        what the current file is and use it.

        * config/i386-bozo.exp: New file.

Thu May 22 18:51:32 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp(gdb_expect): Look for gdb,timeout target
        feature.

        * config/proelf.exp: New entry.

Wed May 21 21:23:16 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp: Remove spurious .* patterns at the beginning
        of regexps.

        * gdb.base/watchpoint.exp: Don't run the test_stepping
        tests if gdb can't call functions on the target.

        * gdb.base/setshow.exp: Don't run the set prompt tests if
        the board has gdb_prompt set.

Tue May 20 08:58:49 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/a2-run.exp: Change "gdb,noargs" to just "noargs".
        * gdb.base/commands.exp: Likewise.
        * gdb.base/setshow.exp: Likewise.

Mon May 19 15:37:50 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/monitor.exp(gdb_start): Look for gdb_prompt target
        feature.

        * config/i960.exp: New file.

Thu May  1 18:01:50 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/funcargs.exp: Check for gdb,short_int target
        feature instead of looking for explicit target triplets.

Mon Apr 28 17:27:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/printcmds.exp: add a couple more tests a la 
        "p 123DEADBEEF", to check parse_number.
        * top.c: change "to enable to enable" to "to enable" in a couple
        of help strings.

Thu Apr 24 14:38:18 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/callfuncs.exp: Mark some tests as expected to fail
        on the mn10300.
 
Mon Apr 21 15:05:42 1997  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a2-run.exp: Add arm-*-coff setup_xfails for cases
        where the test executable is run with explicit args.
        * gdb.base/default.exp: Handle arm-*-coff case for "info float".

Mon Apr 21 13:38:58 1997  Fred Fish  <fnf@cygnus.com>

        * gdb.base/run.c: Use FAKEARGV to build test executable that
        does not require a command line arg, since most simulators
        don't currently support passing such an arg into the simulated
        program.
        * gdb.base/commands.exp: Change tests to insert the proper
        value as the arg to the first recursive factorial call.  Change
        compilation line to define FAKEARGV at compile time.

Wed Apr  9 11:12:36 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/recurse.exp: Enable these tests for the mn10300.
        * gdb.base/watchpoint.exp: Don't expect a failure for an "calling
        function with watchpoint enabled" test.

Tue Apr  8 19:33:20 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/watchpoint.exp(test_watchpoint_triggered_in_syscall):
        Don't call gdb_test when the command doesn't return to a gdb prompt.

        * lib/gdb.exp(gdb_stop_suppressing_tests): Don't print gratuitous
        "Tests restarted" messages.

Tue Apr  8 16:38:46 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/mn10300.exp: Fix buglets in "other" tests.

Thu Apr  3 15:21:26 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/help.exp: update help msg for INFO ADDR; add help test
        for INFO SYMBOL; add help tests for OVERLAY commands.
        * gdb.base/default.exp: add tests for INFO SYMBOL command;
        add tests for OVERLAY commands
        * gdb.base/overlays.c overlays.exp foo.c bar.c baz.c grbx.c ovlymgr.h
        d10v.ld m32r.ld d10vovly.c m32rovly.c: add test case for overlays.
        * gdb.base/sigall.c: add usestubs code frag
        * gdb.base/watchpoint.exp: turn on complex watchpoint test for M32R.
        
Thu Apr  3 09:38:53 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp(gdb_suppress_tests): Add explanation for subsequent
        failures.
        (gdb_stop_suppressing_tests): Note that tests have restarted.

Wed Apr  2 19:04:20 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/h8300.exp: New file.

Sun Mar 30 13:38:25 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/setshow.exp: Check for the existence of a
        feature, not its value.

Sat Mar 29 11:19:46 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.c++/virtfunc.exp: Restart gdb in a sane fashion.

        * gdb.base/scope.exp: It's now init0(), not init().

        * gdb.base/scope0.c: For now, change init() to be init0().

        * config/monitor.exp: Use gdb_serial in preference to serial
        or netport.

        * lib/gdb.exp: Set GDB to [transform gdb] if we're using a remote host
        and it's not already set.

Fri Mar 28 19:54:18 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/setshow.exp: Only test the run command if the target
        isn't using a stub and if it supports argument passing.

Sat Mar 22 19:50:25 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/udi.exp(gdb_start): Make sure UDICONF is set
        properly before starting gdb.

Mon Mar 24 14:40:33 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/mn10300.s: New test file for mn10300 disassembler.
        * gdb.disasm/mn10300.exp: Run mn10300 disassembler tests.
        * gdb.disasm/Makefile.in: Remove "mn10300" when cleaning.

Tue Mar 11 11:42:58 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/vx.exp: Use remote_ld, not vxworks_ld. Don't use
        specialized code to reboot the board, use remote_reboot instead.

        * config/vxworks29k.exp: Use vx.exp, not vx-gdb.exp.

        * lib/gdb.exp: Add GDB_TESTCASE_OPTIONS.

        * config/monitor.exp: Make sure we disconnect from the target.
        Also, try a reboot/reload cycle instead of failing if the
        load fails.

Fri Mar  7 13:48:30 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/default.exp: Don't set match_max.
        * gdb.base/help.exp: Ditto.
        * gdb.base/list.exp: Ditto.
        * gdb.base/signals.exp: Ditto.

        * config/monitor.exp(gdb_load): If gdb,use_standard_load is
        set, use remote_ld to download the testcase instead of
        the GDB loader.

Wed Mar  5 00:00:43 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/vr5000.exp: New file.

        * config/monitor.exp(gdb_target_monitor): Add pattern for
        "Ending remote" to detect errors in connecting.

        * gdb.base/setshow.exp: Add .* within auto language test.

        * lib/gdb.exp(gdb_run_cmd): Add check for gdb_init_command
        target feature.

        * config/monitor.exp(gdb_load): Check for a failure when loading,
        and reboot the board if necessary.

        * gdb.base/setvar.exp(test_set): Handle multiple prints within
        a set of tests. Remove print.* from the patterns being checked.

Mon Mar  3 11:57:43 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/a1-selftest.exp: Use send_gdb consistently. Don't
        refer to gdb_spawn_id.

        * config/m32r-stub.exp: Remove references to gdb_spawn_id, no
        longer used.
        * config/sparclet.exp: Ditto.
        * config/sparclet-old.exp: Ditto.
        * config/slite.exp: Ditto.
        * config/sim.exp: Ditto.
        * gdb.base/funcargs.exp: Ditto.

        * lib/gdb.exp:Remove references to gdb_spawn_id.
        (gdb_expect): Move to remote.exp.

Fri Feb 28 20:47:39 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/monitor.exp: Detect the "Couldn't establish connection"
        message from GDB.

Tue Feb 25 14:08:55 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/bitfields.exp: Use runto instead of explicit
        gdb_run_cmd/gdb_expect sequences.

        * gdb.base/break.exp(text_next_with_recursion): Add match for
        gdb_expect call.

        * config/monitor.exp(gdb_target_monitor): Calling exit loses big.
        We also need to handle the "A program is being debugged already"
        prompt from gdb. Use gdb_test to set the baud rate.

        * lib/gdb.exp(gdb_init): Increase the default expect buffer size
        to 20000. Really. I mean it.

Mon Feb 24 13:23:26 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp(gdb_test): Generate a FAIL message when send_gdb
        fails. If suppress_flag is set, skip perror message about not
        being able to send to GDB.
        (send_gdb): If suppress_flag is set, don't try to send commands to
        GDB.
        (gdb_expect): If suppress_flag is set, always fail immediately.
        (gdb_suppress_tests, gdb_stop_suppressing_tests): New functions.
        (gdb_init): Call gdb_stop_suppressing_tests.
        (default_gdb_exit): Ditto.
        (default_gdb_start): Ditto.

        * gdb.base/bitfields.exp: Call gdb_suppress_tests and
        gdb_stop_suppressing_tests as appropriate.
        * gdb.base/break.exp: Ditto.
        * gdb.base/callfuncs.exp: Ditto.
        * gdb.base/commands.exp: Ditto.
        * gdb.base/exprs.exp: Ditto.
        * gdb.base/funcargs.exp: Ditto.
        * gdb.base/list.exp: Ditto.
        * gdb.base/recurse.exp: Ditto.
        * gdb.base/scope.exp:  Ditto.
        * gdb.base/structs.exp: Ditto.
        * gdb.c++/inherit.exp: Ditto.

Sun Feb 23 19:56:02 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/vr4300.exp: New file.

        * gdb.*/*.exp: Call gdb_expect instead of expect.
        
        * lib/gdb.exp(gdb_expect): New function.

Thu Feb 20 13:57:01 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp(gdb_init): New function.

        * gdb.base/setvar.exp(test_set): Don't bother printing a PASS/FAIL
        for each individual variable set.

        * gdb.base/exprs.exp(test_expr): Make sure each test gets a unique
        name.

        * gdb.base/help.exp: Fix the syntax of a few gdb_test calls.

        * gdb.base/scope.exp: Use gdb_test.

        * gdb.base/ptype.exp: Don't call "gdb_exit; gdb_start" if we're
        aborting; the testsuite driver will do that for us (see
        gdb_finish). Also, use gdb_test in a few more places.

Thu Feb 20 13:32:24 1997  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/help.exp: Fix syntax of "help info all-registers" test.

Thu Feb 20 10:34:21 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/mn10200.s: Add "nop" after "main" so that "main"
        and "add_tests" are not at the same address.

Fri Feb 14 18:47:23 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/ptype.exp: Use gdb_test.

Thu Feb 13 16:09:36 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/mn10200.s (misc_tests): Fix targets for "jsr" insns.
        * gdb.disasm/mn10200.exp (misc_tests): Remove bogus line accidentally
        left in.  No longer expect them to fail.

        * gdb.stabs/*.mt; Deleted, no longer used.
        * gdb.stabs/configure.in: Remove references to target makefile
        frags.
        * gdb.stabs/configure: Rebuilt.

        * gdb.disasm/*.mt: Deleted, no longer used.
        * gdb.disasm/configure.in: Remove references to target makefile
        frags.  Use "sh3.s" as the unique filename for this directory.
        * gdb.disasm/configure: Rebuilt.

        * gdb.disasm/mn10200.s: New test file for mn10200 disassembler.
        * gdb.disasm/mn10200.exp: Run mn10200 disassembler tests.
        * gdb.disasm/Makefile.in: Remove "mn10200" when cleaning.

Tue Feb 11 16:57:58 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/udi.exp: Use mondfe,name instead of remote_host.

Tue Feb 11 11:22:36 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/watchpoint.exp: Don't expect a failure when calling
        a function with a watchpoint enabled on the mn10200.

        * gdb.stabs/weird.exp: Don't quit if "weird.s" doesn't exist
        before trying to create it!

Mon Feb 10 16:40:47 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/vx.exp: Use hostname instead of netport.

        * config/vxworks.exp: New file.

        * gdb.base/a2-run.exp: Change vxworks cases to use gdb_spawn_id.

        * config/monitor.exp(gdb_target_monitor): Look for a prompt from
        gdb before assuming everything worked. Send a ^C if a timeout
        occurs.

        * lib/gdb.exp(gdb_test): Check the result of send_gdb. Use
        $gdb_spawn_id directly.
        (gdb_run_cmd): Try _start as well as start. Use the target feature
        gdb,start_symbol as the symbol to start from when jumping.

Mon Feb 10 11:26:59 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/exprs.exp: Delete bogus/incorrect (and probably
        redundant) test.

        * gdb.base/recurse.exp: Relax final value test for 'b' so that
        it doesn't lose for 16bit integer systems.

Fri Feb  7 09:31:21 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.fortran/types.exp: If the target doesn't support "double"
        data types, then expect "real" types to only be 4 bytes.

        * gdb.c++/virtfunc.exp: Expect failure for virtual function
        call tests if the target doesn't support inferior function calls.

        * gdb.base/printcmds.exp: Allow minor deviation in FP values
        in printf tests.

Thu Feb  6 12:46:14 1997  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/help.exp: Disable "help set", "help show", and
        "help support".  Simplify regexp for "help stack".

        * gdb.base/default.exp: Set match_max to 5000 and the timeout
        to 60 seconds.  Temporarily set match_max to 15000 around the
        "info copying" test.

        * gdb.base/nodebug.exp: Don't try to do an inferior function
        call if the target doesn't support them.
        * gdb.base/printcmds.exp: Likewise.
        * gdb.base/setvar.exp: Likewise.
        * gdb.base/structs.exp: Likewise.
        * gdb.c++/templates.exp: Likewise.
        * gdb.base/ptype.exp: Likewise.  Remove UDI specific stuff.

        * gdb.base/recurse.exp: Enable for the mn10200.

        * configure.in: Do configure gdb.stabs directory for *-*-elf
        targets.
        * configure: Rebuilt.

        * gdb.base/break.exp: Check for gdb,noresults before testing
        exit status and/or results from the target.
        * gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise.
        * lib/gdb.exp: Remove old (now bogus) initialization of
        noinferior, noargs, noresults and nosignals.

Tue Feb  4 21:52:17 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/sh.exp: New file.

        * config/slite.exp: Try to connect multiple times to the board
        before rebooting. Only send a "monitor run" if need_monitor_run
        is set.

        * gdb.base/break.exp: Don't do the "stub continue" test if
        the target has gdb_stub set.

        * gdb.base/callfuncs.exp: Increase the timeout.

        * gdb.base/interrupt.exp: Don't even try to compile the testcase
        if the target has gdb,noinferiorio set.

        * gdb.base/list.exp: Increase match_max to 10000 characters.

        * gdb.base/sigall.exp: Check for gdb,nosignals on the target.

        * gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the
        target.

        * lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs.

Mon Feb  3 12:09:37 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/a1-selftest.exp: Make sure we call gdb_exit before
        trying to delete the copy of gdb. Catch the file delete so we
        don't die if the delete fails; also, the file should be copied to
        the host, not to the build.

Sun Feb  2 00:55:14 1997  Bob Manson  <manson@charmed.cygnus.com>

        * lib/gdb.exp(gdb_test): Surround the result pattern with
        parenthesis in case it contains multiple regexps separated
        with |.

        * gdb.base/watchpoint.exp: Use gdb_test.
        * gdb.base/default.exp: Ditto.

Sat Feb  1 23:51:01 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.*/*.exp: Replace $prompt with $gdb_prompt.
        
        * gdb.base/scope.exp: Use gdb_test.
        * gdb.c++/classes.exp: Ditto.
        * gdb.c++/inherit.exp: Ditto.

Fri Jan 31 13:09:12 1997  Bob Manson  <manson@charmed.cygnus.com>

        * gdb.base/crossload.exp: Don't use execute_anywhere, use
        remote_exec instead.
        * gdb.base/corefile.exp: Don't be ridiculous.
        * gdb.base/*.c: Add missing stub invocations.

Thu Jan 30 16:49:25 1997  Bob Manson  <manson@charmed.cygnus.com>

        * config/slite.exp: Miscellaneous fixes.

        * lib/gdb.exp: Fix runto.

        * gdb.base/signals.exp: Check for a gdb,nosignals feature of
        the target.

        * gdb.base/watchpoint.exp: Fix regexp.

        * lib/gdb.exp(default_gdb_exit): Add a catch to the
        close and wait commands, as the descriptor may now be
        invalid. Always call "remote_close host".

Tue Jan 28 14:42:31 1997  Bob Manson  <manson@charmed.cygnus.com>

           Major rewrite for testsuite revision.
        
        * lib/gdb.exp: Remove references to global CC, CXX, B_OPTIONS,
        TARGET_INCLUDES, LDFLAGS and target_alias. Use gdb_spawn_id
        instead of relying on spawn_id to always contain a valid
        spawn id.
        (get_compiler_info): New procedure to build the ${binfile}.ci
        file, instead of replicating this in N different places.
        (gdb_compile): New procedure.
        
        gdb.*/*.exp: Use gdb_compile and get_compiler_info (with
        appropriate arguments) instead of compile. Use gdb_test in a lot
        more places.  Use send_gdb instead of send. Always run gdb_start
        at the start of a testcase, as this is no longer done magically.

        config/*-gdb.exp: Rename without the -gdb suffix.

        config/mips.exp: Use remote_close instead of exit_remote_shell.
        config/monitor.exp: Use target_info instead of looking at
        baud, timeout, etc.
        config/sim.exp: Use gdb_spawn_id instead of relying on spawn_id.

Sat Dec 14 00:43:57 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.c++/templates.exp (test_ptype_of_templates),
        gdb.c++/inherit.exp (test_ptype_si, test_print_anon_union):
        Update expect patterns for destructors and assignment operators
        to match corresponding c-typeprint.c changes.
        * gdb.c++/templates.exp (test_template_breakpoints):  Revert change
        to destructor breakpoint test, GDB should be able to set the
        destructor breakpoint without specifying arguments.

Tue Dec  3 20:17:52 1996  Fred Fish  <fnf@ninemoons.com>

        * gdb.threads/pthreads.exp: Change result for failure to compile due
        to lack of pthreads runtime support from an error to simply an
        unsupported test, per dejagnu standards.

Sun Dec  1 00:18:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * lib/gdb.exp (gdb_test):  Simplify expect pattern for the case
        where GDB exits to reduce pattern match time.
        (skip_chill_tests):  Skip chill tests for mips*-sgi-irix6*.

        * gdb.base/nodebug.exp:  Add mips*-sgi-irix6* xfails.

Tue Nov 26 18:29:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/callfuncs.exp: Turn on function call tests for h8300.
        * gdb.base/default.exp:   ditto.
        * gdb.base/nodebug.exp:   ditto.
        * gdb.base/printcmds.exp: ditto.
        * gdb.base/ptype.exp:     ditto.
        * gdb.base/setvar.exp:    ditto.
        * gdb.base/structs.exp:   ditto.
        * gdb.base/setshow.c:     Guard against uninitialized values of argc.

Tue Nov 26 17:23:28 1996  Ian Lance Taylor  <ian@cygnus.com>

        * configure, */configure: Rebuild with autoconf 2.12.

Sat Nov 23 13:32:15 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a1-selftest.exp: Change x86 linux setup_xfails to
        use new i*86-pc-linux*-gnu quads.
        * gdb.base/corefile.exp: Ditto.
        * gdb.base/signals.exp: Ditto.
        * gdb.base/sigall.exp: Ditto.
        * gdb.base/interrupt.exp: Ditto.

        * gdb.base/signals.exp (signal_tests_1): Remove setup_xfail
        "i*86-*-linux" for "signal SIGUSR1".  Now works, at least with
        RedHat 4.0.
        
        * gdb.threads/pthreads.c (_MIT_POSIX_THREADS): Define if target is
        linux.  This allows the test case to at least compile on latest
        linux, but still not run due to missing the threads runtime library.

Fri Nov 22 10:13:29 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/a1-selftest.exp (do_steps_and_nexts):  Reinitialize source
        directory to search gdb directory. Accept and step over conditional
        stack alignment code. Consume $prompt in failure cases.
        Reset timeout to $oldtimeout instead of some arbitrary value.
        * gdb.base/nodebug.exp:  Limit backtrace to 10 frames to avoid
        timeout problems with infinite stack backtraces.
        * gdb.base/ptype.exp (ptype struct link, union tu_link):
        Accept function parameters for linkfunc member.

Thu Nov 21 09:17:19 1996  Fred Fish  <fnf@cygnus.com>

        * lib/gdb.exp (CFLAGS): Remove, unreferenced.
        (CXXFLAGS): Remove, unreferenced.
        (B_OPTIONS): Add for -B options and add code to initialize with
        previous -B options and also add -B option to pick up cross compiled
        runtime.
        (TARGET_INCLUDES): Add for -I options and add code to initialize when
        doing cross compiles.
        (target_alias): Declare global.
        (xgcc): Set variable to full path of gcc in build tree.  Use findfile
        to verify that gcc exists in build tree, and if so set CC to that
        gcc and to use B_OPTIONS and TARGET_INCLUDES.
        
Tue Nov 12 16:20:13 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/inherit.exp (test_print_anon_union): Reenable
        ptype test for anonymous union.  Fixup testcase to match
        current gcc debug output.

Mon Nov 11 14:12:06 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/funcargs.c: Use cast rather than "UL" suffix to
        force argument to an unsigned long type.

Mon Nov 11 10:27:55 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/inherit.exp (test_ptype_si): Fix tagless struct ptype
        tests and anonymous union print/ptype tests.
        * gdb.base/list.exp (test_forward-search): Increase timeout by
        5 minutes for the "search extremely long line" case.
        * lib/gdb.exp (gdb_test): Document that the third arg to gdb_test is
        completely optional and that the pass/fail messages use the command as
        the message if that third arg is a null string.
        (gdb_test_exact):  Arrange that a null string pattern means match a
        null string output rather than any output, which might include random
        errors.
        * gdb.base/mips_pro.exp: Add "mips*-sgi-irix4*" xfail for
        backtrace test.
        * gdb.c++/demangle.exp: Add a "*-*-*" xfail for test that was
        always failing and failure is now exposed by gdb.exp changes.

Sat Nov  9 11:13:24 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/inherit.exp (test_ptype_vi): Log some passes that
        weren't being noted.

Sat Nov  9 01:05:10 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/corefile.exp:  Consume $prompt in mmap fail cases.
        * gdb.stabs/weird.exp:  Remove v_comb xfails.

Tue Nov  5 10:44:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/[bitfields.exp crossload.exp funcargs.exp interrupt.exp
                    list.exp scope.exp watchpoint.exp]
          Make all timeout error msgs explicitly say "(timeout)".
        
Mon Nov  4 12:03:06 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * config/monitor.exp: Increase download timeout to 1000 seconds.

Mon Nov  4 12:02:26 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * config/m32r.exp: Increase timeout to 120 seconds.

Sun Nov  3 14:37:05 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/classes.exp: Modify to handle current gcc C++ member ordering
        and accept older ordering as obsolescent gcc or gdb.
        * gdb.c++/templates.exp: Ditto.
        * gdb.c++/virtfunc.exp: Ditto.

Fri Nov  1 11:56:09 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/coremaker.c: Add code to mmap some data so we
        can check that it ends up in the core file.
        * gdb.base/corefile.exp: Add test to read mmapped data
        from core file.

Wed Oct 30 18:19:16 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * config/m32r.exp: New file.

Mon Oct 21 14:40:50 1996  Stu Grossman  (grossman@critters.cygnus.com)

        * testsuite/gdb.base/nodebug.exp:  Whack out -g options by hand so
        that cflags can contains -gstabs, and work correctly for other tests.

Mon Oct 21 14:00:37 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>

        * gdb.base/setshow.exp: New file, tests show and set.
        * gdb.base/setshow.c:   New file, tests show and set.
        * gdb.base/help.exp: Add test for help set|show annotate.
        * gdb.base/default.exp: Add test for set|show annotate.

Wed Oct 16 19:03:54 1996  Stu Grossman  (grossman@critters.cygnus.com)

        * testsuite/gdb.base/break.exp:  Make backtrace from factorial
        errors unique.
        * testsuite/gdb.base/nodebug.exp:  Whack out all -g options
        explicitly.

Tue Oct 15 16:45:02 1996  Stu Grossman  (grossman@critters.cygnus.com)

        * config/sim-gdb.exp (gdb_target_sim):  Remove setting of height
        and width commands.  This is done elsewhere.
        * (gdb_start):  Don't call gdb_start_sim here.  That's already
        done in gdb_load.  This fixes lots of failures in default.exp.

Sun Oct 13 10:40:23 1996  Fred Fish  <fnf@cygnus.com>

        From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>:
        * gdb.base/mips_pro.exp: Fix misplaced gdb_exit/gdb_start/gdb_load.
        * lib/gdb.exp (gdb_test): Treat failures due to program exiting
        in the same we we treat other failures (since it may be an expected
        condition), rather than as an error.
        * gdb.base/signals.exp (test_handle_all_print): Revert back to
        old test format.

Fri Oct 11 17:05:22 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (clean mostlyclean): Also remove chill *.grt files.
        (distclean maintainer-clean realclean): No need to remove files
        twice.  Nuke the duplicates.
        * gdb.base/Makefile.in (EXECUTABLES): Add "structs".
        * gdb.threads/Makefile.in (distclean maintainer-clean realclean): 
        Remove config.h along with other config files.

Mon Sep 30 20:16:22 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for
        "p func1 ()" and note that rests of tests are skipped.
        * gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
        setup_xfails for "print func2::coremaker_local".
        Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
        * gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
        affected by the previous run test.
        * gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
        "print array () ubyte (foo)" and "print/x array () byte (\$i)"
        * gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
        "pass int powerset tuple" and "pass modeless int powerset tuple".
        * gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
        "real write 4" and "real write 8".
        * gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
        setup_xfails for "print vs1 after tuple assign 2",
        "print \$i after tuple assign 2", and
        "print vs2 after tuple assign 2".
        * lib/gdb.exp (gdb_test): When a gdb aborts, print a more
        meaningful error message and return -1 so the caller can
        suppress further tests and avoid a cascade of errors.
        
Fri Sep 27 10:34:51 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a1-selftest.exp: Tweak tests to account for new
        format for printing version.
        * gdb.base/default.exp: Ditto.
        * gdb.base/interrupt.exp: Fix problem with cascade of
        errors if child process dies while calling a function.
        
Fri Sep 13 21:43:48 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (VPATH): Add
        * Makefile.in (Makefile, config.status): Fix rules so things get
        remade when necessary.

Fri Sep 13 18:16:10 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (just-check): Add path to sibling expect dir
        to environment variable specified by RPATH_ENVVAR.

Fri Sep 13 12:05:34 1996  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (RPATH_ENVVAR): New var, set to @RPATH_ENVVAR@.
        (just-check): Add shared library paths for libstdc++, tk,
        tcl, bfd, and opcodes to the environment variable specified
        in RPATH_ENVVAR.
        * configure.in: Add support to recognize --enable-shared flag
        and generate correct value for RPATH_ENVVAR.
        * configure: Regenerated with autoconf.

Mon Sep  2 06:36:02 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/break.exp: Expand "Delete all breakpoints" xfail to
        include all osf versions.
        * gdb.threads/pthreads.exp: Expand "run to main" xfail to include
        all osf versions.  Add -D_MIT_POSIX_THREADS to compilation command
        when target is linux.  When failing to build pthreads test
        executable, give more meaningful message.
        * gdb.threads/pthreads.c: Hpux also uses old definition of second
        arg for pthread_create.
        
Mon Aug 19 09:58:59 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.threads/pthreads.c (PTHREAD_CREATE_ARG2,
        PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations.
        * gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris)
        and -lpthreads (everybody else).
        (test_startup): Fail gracefully if threads are not supported.
        * gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for
        "p/c array_index("abcdef",2)" when not gcc compiled.
        * gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for
        "print func2::coremaker_local" when not gcc compiled.
        * gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for
        "ptype on opaque struct tagname (statically)",
        "ptype on opaque struct tagname (dynamically) 1", and
        "ptype on opaque struct tagname (dynamically) 2"
        for not compiled with gcc.
        * gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for
        backtrace when compiled with gcc.
        * lib/gdb.exp (runto_main): Return result of "runto main" rather 
        than always return success.

Sat Aug 17 13:28:00 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/virtfunc.exp: Remove setup_xfail for "mips-*-irix5*".

Tue Aug 13 10:26:10 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/structs.exp: Undo last change.

Mon Aug 12 15:29:08 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a1-selftest.exp (do_steps_and_nexts): New routine to
        encapsulate all the steps/nexts done during self test, starting
        at main, and makes them less sensitive to optimization issues.
        Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
        signal handler" test.
        * gdb.threads/pthreads.exp: Only run this for native configs.
        * gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
        setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
        tests.
        gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
        for "runto test_calls(void)" test.
        
Sun Aug 11 13:11:24 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/term.exp: Set 7-bit strings, address off, width to 0,
        and don't expect address info in breakpoint confirmations.

Wed Aug  7 20:47:43 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/list.exp (test_forward_search): Increase timeout
        temporarily by 60 seconds for searching extremely long line,
        and then reset to old value when done.  Increase expect input
        buffer to 10000.

Wed Aug  7 15:34:22 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/list.exp (test_forward_search): Fix to handle very
        long source line without overflowing expect's input buffer.

Wed Aug  7 12:03:25 1996  Tom Tromey  <tromey@creche.cygnus.com>

        * config/slite-gdb.exp (gdb_start): Use "full_buffer", not
        "buffer_full".

        * config/nind-gdb.exp (gdb_start): Use "full_buffer", not
        "buffer_full".

        * config/mips-gdb.exp (gdb_start): Use "full_buffer", not
        "buffer_full".

        * lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
        "buffer_full".

Wed Aug  7 11:05:47 1996  Fred Fish  <fnf@cygnus.com>

        * configure.in (configdirs): Add gdb.threads.
        * configure: Regenerated with autoconf.
        * gdb.threads/{config.in, pthreads.c, pthreads.exp}: New.
        * gdb.threads/{Makefile.in, configure.in}: Complete rewrites.
        * gdb.threads/configure: New, generated with autoconf.
        
Tue Aug  6 10:23:04 1996  Tom Tromey  <tromey@rtl.cygnus.com>

        * lib/gdb.exp (gdb_test_exact): Turn \n in pattern into \r\n.

Mon Aug  5 18:11:53 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/signals.exp (test_handle_all_print): Test separately for
        each signal's status in the output of "handle all print".
        * lib/gdb.exp (gdb_test): Document that the pattern must NOT include
        the \r\n sequence that immediately precedes the gdb prompt.
        * gdb.base/a1-selftest.exp: Save original timeout and restore
        after test.

Sun Aug  4 10:20:50 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/hppa.s: Export fmemLRbug_tests_4 as a ST_CODE
        symbol.

Fri Aug  2 17:37:26 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>

        * config/vx-gdb.exp (gdb_start): Fix syntax of `$shell_id < 0'.

Thu Jun 27 20:41:40 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/signals.exp (test_handle_all_print): Temporarily increase
        timeout by 60 seconds.

Thu Jun 27 18:13:57 1996  Fred Fish  <fnf@cygnus.com>

        * config/unix-gdb.exp: Increase default timeout from 30 to 60 sec.
        * config/netware.exp (gdb_run_cmd): Restore old timeout before doing
        error return.

Thu Jun 27 10:54:58 1996  Fred Fish  <fnf@cygnus.com>

        * lib/gdb.exp (default_gdb_start): When reporting a timeout during
        gdb initialization, also report how long dejagnu waited.  Restore
        old timeout before doing error return.  Temporarily increase timeout
        by 3 minutes to allow for slow startups over heavy NFS use.

Tue Jun 25 19:59:17 1996  Fred Fish  <fnf@cygnus.com>

        * lib/gdb.exp: Report timeout value for verbosity level 2.
        * config/gdbserver.exp: Ditto.
        * config/hppro.exp: Ditto.
        * config/mips-gdb.exp: Ditto.
        * config/monitor.exp: Ditto.
        * config/netware.exp: Ditto.
        * config/sim-gdb.exp: Ditto.
        * config/slite-gdb.exp: Ditto.
        * config/udi-gdb.exp: Ditto.
        * config/unix-gdb.exp: Ditto.
        * config/vx-gdb.exp: Ditto.
        * gdb.base/a1-selftest.exp: Ditto.
        * gdb.base/a2-run.exp: Ditto.
        * gdb.base/break.exp: Ditto.
        * gdb.base/corefile.exp: Ditto.
        * gdb.base/list.exp: Ditto.
        * gdb.base/recurse.exp: Ditto.
        * gdb.base/scope.exp: Ditto.
        * gdb.base/signals.exp: Ditto.

Tue Jun 25 23:16:58 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

        * gdb.threads/Makefile.in (docdir): Removed.

Tue Jun 25 17:02:39 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)

        * configure.in (AC_PREREQ): autoconf 2.5 or higher.
        * gdb.{base,c++,chill,disasm,stabs}/Makefile.in (VPATH): set to 
        @srcdir@.
        * gdb.{base,c++,chill,disasm,stabs}/configure.in (AC_PREREQ): 
        autoconf 2.5 or higher.
        * gdb.{base,c++,chill,disasm,stabs}/configure: Rebuilt.

Thu Jun 13 11:16:10 1996  Tom Tromey  <tromey@thepub.cygnus.com>

        * configure: Regenerated.
        * aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
        avoid name clashes with SunOS headers.

Wed Jun  5 16:43:27 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.c++/virtfunc.exp: Search $objdir/../../libstdc++ for libstdc++.

Thu May 30 11:35:11 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/callfuncs.exp: Finish last change -- make sure the
        prototype information ends up in the compiler info file.

Thu May 23 12:48:41 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp: Remove the compiler info file prior to
        attempting to regenerate it.  Eliminate use of a temporary file
        and just generate the info file directly.  Source it immediately,
        for consistency of use.
        * gdb.base/corefile.exp: Ditto
        * gdb.base/exprs.exp: Ditto.
        * gdb.base/funcargs.exp: Ditto.
        * gdb.base/langs.exp: Ditto.
        * gdb.base/list.exp: Ditto.
        * gdb.base/mips_pro.exp: Ditto.
        * gdb.base/nodebug.exp: Ditto.
        * gdb.base/opaque.exp: Ditto.
        * gdb.base/ptype.exp: Ditto.
        * gdb.base/scope.exp: Ditto.
        * gdb.base/setvar.exp: Ditto.
        * gdb.base/signals.exp: Ditto.
        * gdb.base/whatis.exp: Ditto.
        * gdb.c++/templates.exp: Ditto.
        * gdb.c++/virtfunc.exp: Ditto.
        * gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
        whether or not to add -lstdc++ to the compile command line args.

Sat May 18 02:43:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/recurse.exp:  Remove setup_xfail for "sparc*-*-sunos4*",
        it got fixed by the recent lookup_minimal_symbol_by_pc change.
        Increase timeout, a lot of single stepping might be needed if the
        target has no hardware watchpoints.

Wed May 15 08:47:42 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/break.exp: Ignore compiler warnings when compiling
        break.c.
        * gdb.base/callfuncs.exp: Don't run these tests on the h8300.
        * gdb.base/default.exp: Add h8300 xfails.  Handle messages
        from remote-sim.
        * gdb.base/exprs.exp: Add h8300 xfails.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/nodebug.exp: Likewise.
        * gdb.base/printcmds.exp: Likewise.
        * gdb.base/ptype.exp: Likewise.
        * gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300.  Add
        h8300 xfails.
        * gdb.base/return.exp: Handle float/double precision problems 
        on the h8300.
        * gdb.base/funcargs.c: Explicitly make last constant argument to
        call_after_alloca_subr an unsigned long type.
        * gdb.base/return.c: Include stdio.h.

Tue May  7 22:01:12 1996  Rob Savoye  <rob@chinadoll.cygnus.com>

        * config/abug.exp: New file for the older Motorola Bug monitor
        that runs on the mvme13x series VME boards.
        * config/monitor.exp: Use the new config array for target settings
        if they exist.

Fri May  3 16:02:55 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * sim-gdb.exp: Make the SH simulator allocate less space when
        it is targeted.

Thu May  2 12:31:56 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/mips_pro.exp: Expect failure for hppa*-*-* in backtrace
        test.

Wed Mar 20 08:48:03 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/list.exp (test_list_function): Remove setup_xfail for
        "rs6000-*-*" for "list function in include file" when gcc compiled.
        * gdb.base/printcmds.exp: Remove setup_xfail for "rs6000-*-aix*"
        for "p ctable1[120]".
        * gdb.base/scope.exp: Remove setup_xfail for "rs6000-*-*" for
        "print 'scope0.c'::filelocal_bss before run" when gcc compiled.
        Remove setup_xfail for "rs6000-*-*" for
        "print 'scope0.c'::filelocal before run".
        * gdb.base/{langs.exp, lists.exp, opaque.exp, scope.exp},
        gdb.stabs/weird.exp: Remove use of compiler options "-c -o ..."
        since some compilers don't allow both options to be given
        on the same command line.  Create object file and move it.
        
Tue Mar 19 23:49:31 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/corefile.exp: Always regenerate the core file, since
        we always regenerate the coremaker program.  Detect special case
        where registers cannot be read from core file.
        
Tue Mar 19 16:52:49 1996  Fred Fish  <fnf@cygnus.com>

        From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
        * gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
        * gdb.c++/templates.exp: Only match on basename of file since
        some formats like xcoff don't encode directory information.
        * gdb.stabs/weird.exp: Use the right sed script for powerpc
        and rs6000 AIX xcoff targets.
        * configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
        * configure: Regenerate.
        * gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
        here, rather than in distclean.
        
Sun Mar 17 13:35:31 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/mips_pro.exp: Create mips_pro.ci to get gcc_compiled
        defined, and use it to compile the test case with -O2.  The
        native compilation still uses no optimization.
        * gdb.base/mips_pro.c: Remove inline assembly code since
        it is compiled PIC by default, which results in assembler
        warnings that make the testsuite think the compilation
        was unsuccessful.

Sat Mar 16 15:02:24 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/misc.exp: Add note to message for
        "print s.a for foo struct" that this is a known gcc 2.7.2
        and earlier bug.

Fri Mar 15 17:49:57 1996  Fred Fish  (fnf@cygnus.com)

        * gdb.base/break.exp: Fix pattern for matching "Delete all
        breakpoints (y or n) ".  Add "mips-dec-ultrix*" to
        setup_xfail for deleting all breakpoints test.  Fix various
        timeout messages to include "(timeout)".
        * gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
        for "p t_float_values2(3.14159,float_val2)".
        * gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
        for "continue to call2g" when gcc compiled.
        * gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
        "up to foo in langs.exp", "show language at foo in langs.exp",
        "show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
        and "show language at fsub in langs.exp".
        * gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
        "list line 1 in include file", "list message for lines past EOF",
        "list function in include file", "list list0.h:foo", and
        "list filename:function; nonexistant function".
        * gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
        "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
        and "ptype t_char_array" to be for native cc only.
        
Fri Mar 15 16:17:22 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/corefile.exp: Remove "alpha-dec-osf2*" native compiled 
        setup_xfail for "print coremaker_bss", "print coremaker_ro",
        "print func2::coremaker_local", and "backtrace in corefile.exp".

Wed Mar 13 14:54:11 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/signals.exp: Remove "alpha-*-osf2*" setup_xfail for
        "bt in signals.exp".  This problem only appears when running
        the testsuite, and then only intermittently.

Tue Mar 12 15:00:16 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/return.exp (return_tests): Differentiate between
        two tests of continuing.

Tue Mar  5 14:33:33 1996  Stan Shebs  <shebs@andros.cygnus.com>

        * */Makefile.in (maintainer-clean): Remove config.log.
        * gdb.base/Makefile.in (EXECUTABLES): Replace twice with twice-tmp.
        * gdb.c++/Makefile.in (PROGS): Add inherit.
        (clean): Remove *.ci.

Tue Feb 20 16:36:10 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/misc.cc: Add test code from Mike Stump.
        * gdb.c++/misc.exp: Add test to print s.a, for Mike Stump.

Sun Feb 18 11:39:12 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/signals.exp: Change setup_xfail for "alpha-*-osf2"
        to "alpha-*-osf2*" and add comment.
        * gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*"
        setup_xfail for "step over execarg initialization" and
        "step over corearg initialization".
        * gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail
        for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*".
        * gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not
        gcc compiled for "print coremaker_bss", "print coremaker_ro",
        "print func2::coremaker_local", and "backtrace in corefile.exp".
        * gdb.base/signals.exp: Build and source signals.ci.
        Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp"
        to be for gcc only.
        * lib/gdb.exp: Move verbose statements outside conditionals.
        
Sat Feb 17 02:22:14 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/sigall.exp:  Remove setup_xfail for irix4.  Fixed by
        Feb 3 procfs.c change.

Fri Feb 16 13:25:31 1996  Fred Fish  <fnf@cygnus.com>

        * config/unix-gdb.exp: Remove extraneous newlines from end of file.

Thu Feb 15 08:12:55 1996  Fred Fish  <fnf@cygnus.com>

        * config/unix-gdb.exp: Default timeout in UNIX case to 30 seconds, up
        from dejagnu's apparent default of 10 seconds, which gives random
        results when running the tests over NFS on moderately loaded systems.
        * lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case.

Mon Feb 12 16:50:28 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp: Remove setup_xfail for PR 5318.  Now fixed.
        * gdb.base/a2-run.exp: Replace $binfile with $testfile in test
        result reports.

Fri Feb  9 15:56:51 1996  Fred Fish  <fnf@cygnus.com>

        * configure.in (CY_AC_PATH_TCLH): Remove.
        * configure: Regenerate.

Fri Feb  9 08:21:31 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/Makefile.in (clean): Add missing '{'.

Fri Feb  2 10:19:40 1996  Jeffrey A Law  (law@cygnus.com)

        * lib/gdb.exp: Provide a default value for noinferior.

        * lib/gdb.exp: Fix typos (LDLAGS -> LDFLAGS).
        Load libgloss.exp.

Thu Feb  1 20:20:14 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/hppa.exp: Compile directly into an executable, use
        the executable, not the .o to run the tests from.

Wed Jan 31 14:21:09 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/break.exp: Don't test for program exit or exit status
        if $noresults if nonzero.
        * gdb.base/langs.exp: Likewise.
        * gdb.base/watchpoint.exp: Likewise.

        * gdb.base/default.exp: Remove extraneous call to load gdb.exp.
        * gdb.chill/pr-8405.exp: Move skip_chill_tests check to just before
        trying to compile the testcase.

Wed Jan 24 23:42:39 1996  Doug Evans  <dje@charmed.cygnus.com>

        * gdb.base/interrupt.exp (p func1): xfail sparc64-*-solaris2.
        * gdb.base/signals.exp (continue to handler): Likewise.

Tue Jan 23 16:28:22 1996  Per Bothner  <bothner@kalessin.cygnus.com>

        * gdb.c++/classes.exp:  Now = returns false/true, not 1/0.

        * gdb.fortran/exprs.exp:  .LT. and .GT. now return .TRUE. or .FALSE..

Tue Jan 23 15:41:57 1996  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/corefile.exp: Recognize "not found" as failure
        when trying to determine if a core file was generated.
        If no core file was generate the first time, try again without
        the ulimit -c to work around braindamaged shells.

Mon Jan 15 09:33:00 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.stabs/configure.in (alpha-*-*,mips-*-*): Replace
        [] tests with "test" and enclose string in quotes.
        * gdb.stabs/configure: Rebuild
        
Thu Jan 11 09:43:14 1996  Tom Tromey  <tromey@creche.cygnus.com>

        Changes in sync with expect:
        * aclocal.m4 (CY_AC_PATH_TCLH): Handle Tcl 7.5 and greater.
        (CY_AC_PATH_TCLLIB): Handle Tcl 7.5 and greater.
        (CY_AC_PATH_TKH): Handle Tk 4.1 and greater.
        (CY_AC_PATH_TKLIB): Handle Tk 4.1 and greater.  Properly quote
        argument to AC_REQUIRE.
        * configure: Regenerated.

Thu Jan  4 08:17:22 1996  Fred Fish  <fnf@cygnus.com>

        * gdb.base/corefile.exp: When generating a core, discard any
        error messages about ulimit not found and the "core dumped"
        message from the shell that runs the coredumper.

Wed Jan  3 01:30:41 1996  Jeffrey A Law  (law@cygnus.com)

        * lib/gdb.exp (skip_chill_tests): Skip them on the PA too.

        * gdb.stabs/weird.exp: Use ${target_triplet} to determine
        which sed script to run.  Expect failure for v_comb test
        on PA targets too.
        
Sat Dec 30 16:09:04 1995  Fred Fish  <fnf@rtl.cygnus.com>

        * gdb.base/corefile.exp: Remove "i*86-*-linux" xfail for
        "print func2::coremaker_local" and for "backtrace in corefile.exp"

Sat Dec 30 12:59:12 1995  Fred Fish  <fnf@cygnus.com>

        * lib/gdb.exp: Fix typo and rewrite skip_chill_tests.
        * gdb.stabs/weird.exp: Setup "sparc-sun-sunos4*" and
        "sparc-sun-solaris*" xfails for "p v_comb".
        * lib/gdb.exp (default_gdb_start): Fix typo.
        * gdb.base/corefile.exp: Allow "Core was generated by ..."
        messages to not include the full program name that caused
        the core dump since some systems (such as solaris) apparently
        truncate this path to about 80 characters.
        When generating a core file first try increasing the core file
        size limit to unlimited since some systems may default it to
        zero, and it is harmless to try it.  Move the test for failing
        to generate a core file to where it will actually get executed.
        * gdb.c++/templates.exp (test_ptype_of_templates): Accept
        new gdb result from g++ debug info improvements and make old
        pattern obsolescent.  Also account for size_t differences
        (may be int or long).
        * gdb.base/a1-selftest.exp (test_with_self): Check for case where
        initialization before function call is placed in the delay slot
        and thus appears to be skipped over by commands such as "next".

Fri Dec 29 16:09:20 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/a1-selftest.exp (test_with_self): Run without windows.

Wed Dec  6 10:45:42 1995  Jeffrey A. Law  <law@sethra.cygnus.com>

        * gdb.base/*.exp: Make ${srcfile} only be the basename of the
        input source file; fix code to compile test to deal with this
        convention.
        * gdb.c++/*.exp: Likewise.

Mon Nov 27 11:40:16 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/signals.exp: Setup "alpha-*-osf2*" xfail for
        "bt in signals.exp".

Sat Nov 25 20:52:15 1995  Fred Fish  <fnf@phydeaux.cygnus.com>

        * gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for
        "step over execarg initialization" and
        "step over corearg initialization".

Sat Nov 25 18:20:14 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/ptype.c (main): Declare malloc as a "char *" for systems
        with sizeof(pointer) > sizeof(int).  Avoid "void *" or include files.

Sat Nov 25 11:03:42 1995  Fred Fish  <fnf@cygnus.com>

        From Rob Savoye  (rob@poseidon.cygnus.com)
        * Makefile.in, configure.in, gdb.base/{Makefile.in, configure.in},
        gdb.c++/{Makefile.in, configure.in}, gdb.chill/{Makefile.in,
        configure.in}, gdb.disasm/{Makefile.in, configure.in},
        gdb.stabs/{Makefile.in, configure.in}, gdb.threads/{Makefile.in,
        configure.in}: Major reworking for autoconfig.
        * aclocal.m4, configure, gdb.base/configure, gdb.c++/configure,
        gdb.disasm/configure, gdb.stabs/configure, gdb.stabs/default.mt :
        New files.
        * config/unix-gdb.exp:  Make GDB global.
        * gdb.base/{a1-selftest.exp, a2-run.exp,bitfields.exp, break.exp,
        callfuncs.exp, commands.exp, corefile.exp, crossload.exp, exprs.exp,
        funcargs.exp, interrupt.exp, langs.exp, list.exp, mips_pro.exp,
        nodebug.exp, opaque.exp, printcmds.exp, ptype.exp, recurse.exp,
        regs.exp, return.exp, scope.exp, setvar.exp, sigall.exp, signals.exp,
        term.exp, twice.exp, watchpoint.exp, whatis.exp},
        gdb.c++/{classes.exp, callfuncs.exp, inherit.exp, misc.exp,
        templates.exp, virtfunc.exp}, gdb.chill/{callch.exp, chillvars.exp,
        misc.exp, pr-4975.exp, pr-5016.exp, pr-5020.exp, pr-5022.exp,
        pr-5646.exp, pr-5984.exp, pr-6292.exp, pr-6632.exp, pr-8134.exp,
        pr-8136.exp, result.exp, string.exp, tuples.exp},
        gdb.disasm/{hppa.exp, sh3.exp}, gdb.stabs/weird.exp: Change continues
        to returns as necessary, arrange for test to compile own testcase
        executable.
        * lib/gdb.exp: Changes for testsuite to compile own test cases.
        
Tue Nov 21 16:15:45 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.c++/classes.exp (test_pointers_to_class_members): Add
        clear_xfail at end of test which might not call either pass or fail.
        * gdb.base/a1-selftest.exp: Add i*86-*-linuxaout xfail for
        "backtrace through signal handler".

Sat Nov 18 04:09:31 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/sigall.exp:  Work around OSF/1-3.x kernel bug when
        continuing from a job control stop signal.
        * gdb.stabs/alpha.mt:  Use $(CFLAGS) when building weird.o.

Wed Nov 15 00:28:03 1995  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/callfuncs.exp: Remove bogus hppa xfails.
        * gdb.base/corefile.exp: Likewise.
        * gdb.base/funcargs.exp: Likewise.

Tue Nov 14 15:18:10 1995  Stu Grossman  (grossman@cygnus.com)

        * config/hmsirom.exp:  Setup for talking to hmsi ROM monitor.
        * config/monitor.exp:  Add support for setting baud rate.

Sat Nov  4 15:35:52 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and
        i*86-*-linux* xfails for "backtrace through signal handler".
        * gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for
        "print func2::coremaker_local".
        * gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4,
        alpha-dec-osf2* xfail for
        "delete all breakpoints when none".

Wed Nov  1 15:57:16 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/break.exp: Change test that deletes all breakpoints
        when no user breakpoints are installed.  A post 4.15 change
        causes gdb to no longer prompt in this case.

Tue Oct 31 15:13:43 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/return.exp (return_tests):  Change xfail for test
        "correct value returned double test" to stop xfailing at
        Solaris 2.5.  Apparently the bug has been fixed.

Sun Oct 29 12:18:16 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.stabs/ecoff.sed: Remove comment lines except for first one.
        IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere.

Tue Oct 24 11:12:12 1995  Jeffrey A Law  (law@cygnus.com)

        * gdb.disasm/hppa.exp: Test lci and syncdma instructions.
        * gdb.disasm/hppa.s: Corresponding changes.

Wed Oct 18 11:27:47 1995  Jeffrey A Law  (law@cygnus.com)

        * gdb.base/configure.in (hppa*-*-hpux*): No longer needs target
        makefile fragment.
        * config/mt-hpux: Deleted.

Tue Oct 17 23:02:12 1995  Jeffrey A Law  (law@cygnus.com)

        * Many files: When warning about suppressed tests due to a 
        nonexistant test binary, avoid incrementing the warning count.

Tue Oct 10 11:00:41 1995  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (TARGET_FLAGS_TO_PASS):  Remove BISON.
        
Sun Oct  8 04:23:14 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/return.exp:  Change xfail from "sparc-*-solaris2.*" to
        "sparc-*-solaris2*".

Sat Sep 23 01:22:23 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/coremaker.c:  Produce a full core dump for AIX targets.
        Add global and local variables and initialize them.
        * gdb.base/corefile.exp:  Test correct mapping of corefile sections
        by printing variables. Remove rs6000 and powerpc xfails, BFD now
        extracts the file name and terminating signal from the core file.
        * TODO:  Remove note about tests for correct mapping of corefile.
        * gdb.base/ptype.c (main):  Use boolean2 to inhibit AIX 4.1 xlc
        from optimizing it away.
        * gdb.stabs/weird.exp:  Remove rs6000 xfail, xcoffread.c now
        handles common blocks.

Thu Sep 21 01:28:10 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/sh3.s (fmac): Update for new assembler syntax
        * gdb.disasm/sh3.exp (fmac): Corresponding changes.

Wed Sep 20 13:15:05 1995  Ian Lance Taylor  <ian@cygnus.com>

        * Makefile.in (maintainer-clean): New target, synonym for
        realclean.
        * gdb.base/Makefile.in (maintainer-clean): Likewise.
        * gdb.c++/Makefile.in (maintainer-clean): Likewise.
        * gdb.chill/Makefile.in (maintainer-clean): Likewise.
        * gdb.disasm/Makefile.in (maintainer-clean): Likewise.
        * gdb.stabs/Makefile.in (maintainer-clean): Likewise.
        * gdb.threads/Makefile.in (maintainer-clean): Likewise.

Sun Sep 10 13:14:01 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/scope.exp (text_at_main):  Add "hppa*-*-hpux*"
        xfails when not gcc compiled for "print foo::funclocal".
        (test_at_foo):  Add "hppa*-*-hpux*" xfails when not gcc compiled for:
        "print foo::funclocal at foo",
        "print 'scope1.c'::foo::funclocal at foo",
        "print foo::funclocal_bss at foo",
        "print 'scope1.c'::foo::funclocal_bss at foo",
        "print foo::funclocal_ro at foo",
        "print 'scope1.c'::foo::funclocal_ro at foo",
        "print bar::funclocal at foo" and
        "print 'scope1.c'::bar::funclocal at foo".
        (test_at_bar):  Add "hppa*-*-hpux*" xfails when not
        gcc compiled for "print foo::funclocal at bar".
        Expand all messages to ensure that they identify that
        the test is at bar().
        * gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not
        gcc compiled for:
        "ptype on opaque struct pointer (statically)",
        "ptype on opaque struct tagname (statically)",
        "ptype on opaque struct pointer (dynamically) 1",
        "ptype on opaque struct tagname (dynamically) 1",
        "ptype on opaque struct pointer (dynamically) 2" and
        "ptype on opaque struct tagname (dynamically) 2
        * gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not
        gcc compiled for:
        "p datalocal"
        "whatis datalocal",
        "ptype datalocal",
        "p bsslocal",
        "whatis bsslocal", and
        "ptype bsslocal".
        * gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for
        "backtrace in langs.exp" and "up to langs0__2do in langs.exp"
        when not gcc compiled.
        * gdb.base/funcargs.exp (float_and_integral_args):  Add
        "hppa*-*-hpux*" xfail for "run to call2a" when not gcc
        compiled.
        (discard_and_shuffle):  Add "hppa*-*-hpux*" xfail for
        "backtrace from call6a" when not gcc compiled.
        (shuffle_round_robin): Add "hppa*-*-hpux*" xfail for
        "backtrace from call7a" when not gcc compiled.
        * gdb.base/callfuncs.exp (do_function_calls):
        Add "hppa*-*-hpux*" xfail when not gcc compiled for
        "p t_char_array_values(char_array_val2,char_array_val1)",
        "p t_char_array_values(char_array_val1,char_array_val2)",
        "p t_char_array_values("carray 1","carray 2")",
        "p t_char_array_values("carray 1",char_array_val2)",
        "p t_char_array_values(char_array_val1,"carray 2")",
        "p sum_args(1,{2})",
        "p sum_args(2,{2,3})",
        "p sum_args(3,{2,3,4})",
        "p sum_args(4,{2,3,4,5})"
        * gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for
        "backtrace in corefile.exp" when not gcc compiled.

Sat Sep  9 01:35:39 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/signals.exp:  Rewrite `handle all print' test as
        a procedure. Accept blanks or TABs as whitespace, increase
        timeout and expect input buffer size for the large output
        from the command. Remove "i*86-*-bsdi2.0" xfail.

Sat Sep  2 06:41:26 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/setvar.exp:  Add new testcases for truncation when
        assigning invalid values to bitfields.

Sat Sep  2 00:17:31 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp (do_function_calls):  Remove 
        mips-sgi-irix* xfail for
        "call inferior func with struct - returns char *"
        and fix test so that an optional (unsigned char *) cast is
        accepted in the result.

Fri Sep  1 13:42:01 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/funcargs.exp (float_and_integral_args):  Remove
        sparc-sun-solaris2* xfail for "print f1 after run to call2a".
        * gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix.
        * gdb.base/signals.exp: Remove duplicate "handle all print" test
        that accidentally got checked in.

Sun Aug 27 23:35:35 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp (do_function_calls):  Add alpha-dec-osf2* 
        clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc
        compiled test.
        * gdb.base/opaque.exp (setup_xfail_on_opaque_pointer):
        Add mips-sgi-irix5* xfail for not gcc compiled.
        * gdb.base/Makefile.in (nodebug.o):  Also create nodebug.ci.
        * gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for
        "p top", "whatis top", "p middle", and "whatis middle".
        * gdb.base/whatis.exp: Add mips-sgi-irix* xfail for
        "whatis signed char" for not gcc compiled.
        * gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for
        "set variable signed char=-1 (-1)" and
        "set variable signed char=0xFF (0xFF)" for not gcc compiled.
        * gdb.base/funcargs.exp (float_and_integral_args):
        Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled.
        Add mips-sgi-irix* xfail when not gcc compiled for
        "continue to call2b".
        Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for
        "continue to call2g".
        (discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for
        "backtrace from call6a"
        (shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for
        "backtrace from call7k".
        Add mips-sgi-irix5* xfail when not gcc compiled for
        "backtrace from call7a".
        (localvars_after_alloca):  Fix gdb_test cmds for
        "print * after runto ...".
        Remove rs6000-*-* xfails for
        "print i after runto localvars_after_alloca" and
        "print l after runto localvars_after_alloca"
        for all compilers.
        * gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5),
        when not compiled with gcc, for:
        "print signed char == (minus)",
        "print signed char != (minus)",
        "print signed char < (minus)",
        "print signed char > (minus)".
        * gdb.base/callfuncs.exp (do_function_calls):
        Add mips-sgi-irix* xfail, when compiled with native compiler, for
        "call inferior func with struct - returns char *".
        * gdb.base/return.exp (return_tests): Change xfail for 
        "correct value returned double test" to include Solaris 2.4.
        * gdb.base/funcargs.exp (float_and_integral_args):
        Add sparc-sun-solaris2* xfail for "print f1 after run to call2a".
        
Sat Aug 26 00:26:11 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/setvar.c, gdb.base/setvar.exp:  Add new tests for
        enumeration bitfields if compiling with GNU C.
        * lib/gdb.exp:  Consume `(y or n) ' in `Reinitialize source path
        to empty' prompt.

Tue Aug 22 00:30:37 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run
        test for PRO targets.

        * gdb.base/funcargs.exp: Avoid ever setting more than 8
        breakpoints in the inferior at any given time by making
        two groups of breakpoints for call2*, call6* and call7*
        tests.

Sun Aug 20 06:58:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/funcargs.exp:  Fix typos introduced by Aug 15 change.
        * gdb.base/callfuncs.c (main):  Use struct_val1 to inhibit xlc
        from optimizing it away.
        * gdb.base/callfuncs.exp:  Remove rs6000-*-* xfails for
        "call inferior func with struct".

Wed Aug 16 11:57:15 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * configure.in: Only configure gdb.chill for particular targets.

Tue Aug 15 09:42:44 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/Makefile.in:  Add action to .c.o transformation
        rule that generates a .ci file for each .o file and remove
        explicit .c.o rules except for callfuncs.o.
        * gdb.c++/Makefile.in:  Add .cc.o transformation rule that
        generates a .ci file for each .o file and remove explicit
        .cc.o rules.
        (clean): Remove *.tmp *.ci files.
        (EXECUTABLES): Remove templ-info.exp.
        * gdb.base/compiler.c: New file.
        * gdb.c++/compiler.cc: New file
        * gdb.base/scope.exp: Source gdb.base/scope.ci.
        Change rs6000-*-* xfail for
        "print 'scope0.c'::filelocal_ro" and
        "print 'scope1.c'::filelocal" and
        "print 'scope1.c'::filelocal_bss" and
        "print 'scope1.c'::filelocal_ro" and
        "print 'scope1.c'::foo::funclocal" and
        "print 'scope1.c'::foo::funclocal_ro" and
        "print 'scope1.c'::bar::funclocal" and
        "print 'scope0.c'::filelocal_ro" and
        "print 'scope1.c'::filelocal at foo" and
        "print 'scope1.c'::filelocal_bss at foo" and
        "print 'scope1.c'::filelocal_ro at foo" and
        "print 'scope1.c'::foo::funclocal at foo" and
        "print 'scope1.c'::foo::funclocal_bss at foo" and
        "print 'scope1.c'::foo::funclocal_ro at foo" and
        "print 'scope1.c'::bar::funclocal at foo" and
        "print 'scope0.c'::filelocal_ro" and
        "print 'scope1.c'::filelocal" and
        "print 'scope1.c'::filelocal_bss" and
        "print 'scope1.c'::filelocal_ro" and
        "print 'scope1.c'::foo::funclocal" and
        "print 'scope1.c'::foo::funclocal_bss" and
        "print 'scope1.c'::foo::funclocal_ro" and
        "print 'scope1.c'::bar::funclocal" and
        "print 'scope1.c'::bar::funclocal_bss"
        to only be xfail'd when not compiled with gcc.
        Add rs6000-*-* xfail for 
        "print 'scope0.c'::filelocal_bss before run"
        when compiled with gcc.
        (test_at_main): Add rs6000-*-* xfail for
        "print filelocal_ro in test_at_main"
        when compiled with gcc.
        * gdb.base/ptype.exp: Source gdb.base/ptype.ci.
        Add rs6000-*-aix* xfail for 
        "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and
        "ptype t_char_array",  not compiled with gcc.
        * gdb.base/list.exp (test_list_function):  Add rs6000-*-*
        xfail for "list foo (in include file)" when gcc compiled.
        * gdb.base/funcargs.exp: Source gdb.base/funcargs.ci
        (integral_args): Add rs6000-*-* xfail for
        "run to call0a" if not compiled with gcc.
        (unsigned_integral_args): Add rs6000-*-* xfail for
        "run to call1a" if not compiled with gcc.
        (float_and_integral_args):  Add rs6000-*-* xfail for
        "run to call2a" if not compiled with gcc and for
        "continue to call2b" for any compiler.
        Add rs6000-*-* xfail to
        "print f1 after run to call2a" for gcc compiled.
        (discard_and_shuffle): Add rs6000-*-* xfail for
        "run to call6a".
        (shuffle_round_robin): Add rs6000-*-* xfail for
        "backtrace from call7a" if not compiled with gcc.
        Add rs6000-*-* xfail for
        "backtrace from call7b" if compiled with gcc.
        (call_after_alloca): Add rs6000-*-* xfail for
        "print c in call_after_alloca" and
        "print s in call_after_alloca" and
        "backtrace from call_after_alloca_subr"
        if not compiled with gcc.
        (localvars_in_indirect_call): Add rs6000-*-* xfail for
        "print c in localvars_in_indirect_call" and
        "print c in localvars_in_indirect_call" and
        "backtrace in indirectly called function" and
        "stepping into indirectly called function"
        if not compiled with gcc.
        (localvars_after_alloca): Add rs6000-*-* xfail for
        "print c after runto localvars_after_alloca" and
        "print s after runto localvars_after_alloca" and
        "print i after runto localvars_after_alloca" and
        "print l after runto localvars_after_alloca"
        for all compilers.
        * gdb.base/whatis.exp: Source gdb.base/whatis.ci rather
        than whatis-info.exp.
        * gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather
        than opaque-info.exp.
        Setup rs6000-*-* xfail for
        "ptype on opaque struct pointer (statically)" and 
        "ptype on opaque struct pointer (dynamically)" when
        not compiled with gcc.
        * gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci
        rather than callf-info.exp.
        (do_function_calls):  Add clear_xfail for rs6000-*-* for
        "p t_float_values2(3.14159,float_val2)".  Seems to work
        fine there, both with xlc and gcc.  Need to find out what
        it is doing right and fix other platforms.
        * gdb.base/callfuncs.exp: Add rs6000-*-* xfail for
        "call inferior func with struct - returns int",
        "call inferior func with struct - returns long",
        "call inferior func with struct - returns float",
        "call inferior func with struct - returns double",
        "call inferior func with struct - returns char *",
        but only if not gcc compiled (presumes xlc compiled).
        Change rs6000-*-* xfails for
        "call inferior func with struct - returns char" and
        " call inferior func with struct -  returns short" to only
        xfail if not using gcc.
        (clean mostlyclean):  Remove *.ci and *.tmp files.
        * gdb.c++/templates.exp: Source gdb.c++/templates.ci rather
        than templ-info.exp.
        * gdb.base/langs.exp:  Source gdb.base/langs.ci.
        Add rs6000-*-* xfail for "up to foo in langs.exp"
        "up to cppsub_ in langs.exp" and "up to fsub in langs.exp"
        when not gcc compiled.
        
Sat Aug 12 15:05:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

        * gdb.base/callfuncs.exp: Add xfails for the powerpc.
        * gdb.base/corefile.exp: Likewise.
        * gdb.base/list.exp: Likewise.
        * gdb.base/scope.exp: Likewise.
        * gdb.base/siganls.exp: Likewise.

        * gdb.base/nodebug.exp: Add xfails for the powerpc.  Handle aix4
        compiler output.
        * gdb.base/whatis.exp: Likewise.

Fri Aug 11 13:36:20 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a
        failure (opcode table has been fixed to match reality).

Mon Aug 14 09:01:59 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp: Add rs6000-*-* xfails for
        "call inferior func with struct - returns char",
        "call inferior func with struct - returns short"

        * gdb.base/scope.exp: Remove rs6000-*-* xfails for
        "print 'scope0.c'::filelocal at main",
        "print 'scope0.c'::filelocal_bss in test_at_main",
        "print 'scope0.c'::filelocal at foo",
        "print 'scope0.c'::filelocal_bss in test_at_foo",
        "print 'scope0.c'::filelocal at bar",
        "print 'scope0.c'::filelocal_bss in test_at_bar"
        
        * gdb.base/list.exp: Remove rs6000-*-* xfail for "list function
        in source file 1".  This bug seems to have been fixed with both
        gcc and native cc (was native assembler bug?).

Wed Aug  9 08:04:12 1995  Fred Fish  (fnf@cygnus.com)

        * gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for
        "backtrace through signal handler" to "i*86-*-sysv4*".
        * gdb.base/signals.exp: Add xfail for "'next' behaved as
        continue" case.  Add "known SVR4 bug" to fail message.
        Add "i*86-*-bsdi2.0" xfail for "handle all print".
        Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
        * gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
        "whatis unnamed typedef'd enum..." and "ptype t_char_array".
        * gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
        "up to foo in langs.exp", "show language at foo in
        langs.exp", "up to cppsub_ in langs.exp", "show
        language at cppsub_ in langs.exp", "up to fsub in
        langs.exp", and "show language at fsub in langs.exp".
        * gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
        "bactrace in corefile.exp".
        * gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
        "call inferior function with struct - returns float" and
        "call inferior function with struct - returns double".
        
Mon Aug  7 02:43:28 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/sh3.s: Source for sh3 disassembler tests.
        * gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
        * gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
        * gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.

Mon Aug  7 08:09:37 1995  Fred Fish  <fnf@cygnus.com>

        * Makefile.in (CHILL_FOR_TARGET): Use previously defined
        (or overriden) "CHILL" macro rather then bare "gcc".
        Also look for ../../gcc/xgcc since that is what we will
        actually need, not "Makefile".  Remove following assignment
        of CHILL to CHILL_FOR_TARGET because that results in
        recursive definition.

Sun Aug  6 16:52:29 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/corefile.exp:  Change xfail for backtrace in
        corefile.exp from linuxaout to all linux.
        * gdb.base/sigall.exp (test_one_sig):  Specifically deal with
        cases where we miss the breakpoint at the signal handler
        for some reason.  Setup xfail for linuxoldld/linuxaout and
        getting SIGIO.  Setup xfail for linuxoldld/linuxaout for
        hitting SIGURG breakpoint.
        * gdb.base/signals.exp:  Setup xfail for "next" acting like
        continue to add linuxoldld.  Setup xfail for all linux for
        "next to handler in signals_tests_1", "backtrace in
        signals_tests_1", "continue to func1", "pass SIGUSR1",
        and continue to handler".

Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>

        * Update all FSF addresses except those in COPYING* files.

Sun Jul 30 17:50:35 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/a2-run.exp: Change messages to be more explicit about
        the status of args, and quote binfile in results.

Sun Jul 30 10:24:20 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/callfuncs.exp: Add tests for passing structs to
        inferior functions and return various types.
        * gdb.base/callfuncs.c: Add functions to receive a struct
        and return a member of the struct, in various types.

Sat Jul 29 14:22:33 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/Makefile.in (clean):  Remove callf-info.exp.

Fri Jul 28 13:36:11 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>

        * config/vxworks29k.exp: New file, sources vxworks.exp.

Fri Jul 28 00:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

        * config/gdbremote.exp: New file.  Testing framework using
        gdbserver.

Thu Jul 27 12:17:14 1995  Fred Fish  (fnf@cygnus.com)

        * gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for
        "call function when asleep" and "send end of file".
        * gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
        for "backtrace in corefile.exp".
        * gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
        for "backtrace through signal handler".
        * gdb.base/corefile.exp: Make sure we actually generate a core file
        before trying the core tests.  Some systems allow the user to suppress
        generation of core files and default to that (linux for example).
        * gdb.base/signals.exp: Change xfail for "next" acting like "continue"
        from "i*86-*-linux" to "i*86-*-linuxaout".  Works with ELF beta.

Tue Jul 25 17:30:10 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

        * gdb.threads: New directory with some crude multi-threaded
        gdb tests (step.exp and step2.exp).
        * config/mt-lynx (STEP_EXECUTABLE): Define.
        (THREADFLAGS): Define.

Tue Jul 25 01:03:52 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx.

        * gdb.base/signals.exp: Disable whole file for lynx until
        further notice.

        * gdb.base/signals.exp: xfail test where "next" acts like
        "continue" for lynx.

        * gdb.base/interrupt.exp: xfail test for calling function while
        inferior is asleep for lynx.

        * gdb.base/watchpoint.exp: Handle more cases of gdb echoing more
        than one cr-lf  after each command.

Sun Jul 23 23:33:18 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * configure.in:  Reinstate setting of stabsdirs variable, fix
        typo in setting up configdirs for native builds.

        * gdb.base/return.exp:  Fix typo in return double test.
        * gdb.base/return.c (tmp2, tmp3):  Made global to inhibit the
        compiler from optimizing them away.

Fri Jul 21 11:39:34 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/gdbvars.exp: Expect zero or more additional cr-lf
        sequences to be echo'd by gdb when using gdb_test.
        * gdb.chill/chexp.exp: Likewise.
        * gdb.fortran/exprs.exp: Likewise

Thu Jul 20 13:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

        * gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds
        after the inferior gdb has started.

        * gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
        after each command.
        * gdb.base/funcargs.exp: Likewise.
        * gdb.base/gdbvars.exp: Likewise.
        * gdb.base/interrupt.exp: Likewise.
        * gdb.base/list.exp: Likewise.
        * gdb.base/watchpoint.exp: Likewise.
        * gdb.c++/demangle.exp: Likewise.
        * gdb.c++/inherit.exp: Likewise.
        * gdb.chill/chexp.exp: Likewise.
        * gdb.fortran/exprs.exp: Likewise.

        * gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall
        test if we can't handle IO to/from the inferior.

        * gdb.c++/misc.exp: Always check for a program already being
        started after sending a "run" command to gdb.

        * gdb.base/twice.exp: Start with a fresh gdb.

        * gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests
        only depend on gdb's expression code, not the chill runtime.

        * gdb.base/return.c: Put return values into variables so we
        can have gdb print them rather than depending on the program
        to print them.
        * gdb.base/return.exp: Corresponding changes.

        * lib/gdb.exp: Provide default value for noinferiorio.
        * gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from
        the inferior.

        * gdb.base/break.exp: Always check for a program already being
        started after sending a "run" command to gdb.
        (text_next_with_recursion): Don't check the output from the
        program's printf statement.  Instead just make sure the program
        exited.

        * gdb.base/commands.exp: Protect tests which need arguments with
        $noargs conditionals.

Wed Jul 19 22:42:43 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/printcmds.exp:  Adjust expect patterns for addresses
        of structure member arrays to match gdb/valops.c:value_addr change.

Mon Jul 17 10:12:27 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout
        cases.

Wed Jul 12 10:20:08 1995  Fred Fish  (fnf@cygnus.com)

        * configure.in (configdirs):  Remove gdb.chill from default list
        of subdirs and then add it back in only if doing a native build.
        The current chill compiler does not yet work in any cross build.
        * Revert all signal changes from Jul 6.
        * gdb.base/{sigall.c signals.c}:  Define away signal() and alarm()
        for sh-hms targets, allowing these tests to link, with no other
        changes.  Testing is suppressed by setting "nosignals" in site.exp.

Thu Jul  6 20:58:30 1995  Fred Fish  (fnf@cygnus.com)

        * configure.in (signaldirs): Define and add to configdirs for all
        targets except some specific ones that are known to not support signals.
        Also clean up formatting.
        * gdb.base/Makefile.in (EXECUTABLES):  Remove sigall and signals.
        (signals, sigall):  Remove rules to build.
        * gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}:
        Moved to new gdb.signals directory.
        * gdb.signals: New test directory.
        * gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp,
        signals.c signals.exp}:  New or moved files.

Sun Jun 25 12:55:18 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist.

Wed Jun 21 16:35:55 1995  Fred Fish  <fnf@cygnus.com>

        * gdb.base/return.exp:  Xfail `return double' test failure
        on at least Solaris 2.3 and handle future/past versions on
        a case by case basis as appropriate.  Also update message
        to include i*86 failures.

Wed May 24 07:10:10 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS.

        * lib/gdb.exp: Fix comment which erroneously identified
        gdb_file_cmd as gdb_load (the 19 May change was in fact to
        gdb_file_cmd not gdb_load).
        * config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout".

        * gdb.base/setvar.exp: Make test names consistent between pass and
        fail cases.  Use gdb_test more.

Fri May 19 07:22:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp (gdb_load): Add "upvar timeout timeout".

Mon May 15 23:50:51 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/help.exp:  Fix expected help string for `show commands'.

Thu May 11 07:55:11 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>

        * gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM.

        * gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack
        of a text section.

Thu May 11 15:02:24 1995  Stu Grossman  (grossman@andros.cygnus.com)

        * config/monitor.exp (gdb_target_monitor):  Fix loop interator so
        that loop eventually terminates.  Fix Connection refused logic so
        that testsuite will expire nicely.

Wed May 10 17:57:35 1995  Stu Grossman  (grossman@andros.cygnus.com)

        * config/cpu32bug.exp, config/est.exp, config/hppro.exp,
        config/rom68k.exp:  New tcl glue for the appropriate monitors.
        These all just end up calling monitor.exp.
        * config/monitor.exp (gdb_target_monitor):  Handle `Connection
        refused' by retrying.  Cleanup some timeout issues.
        * (gdb_load):  Reduce timeout.  Cleanup some timeout issues.
        * lib/gdb.exp (gdb_test gdb_test_exact):  Upvar timeout so that
        callers don't have to set/restore global timeout variable.

        * The following set of changes centralizes management of the global
        timeout variable.  This way, it can be set in one target dependent
        place instead of dozens of places scattered throughout the test suite.
        If you need to lengthen a timeout, then you should either set timeout
        in one of the config/{target}.exp files, or multiply it by a factor.
        Setting it to an absolute value is always going to lose for some
        targets.
        * gdb.base/a1-selftest.exp (test_with_self):  Only use local timeout.
        * gdb.base/callfuncs.exp (do_function_calls):  Don't set timeout.
        * gdb.base/funcargs.exp:  Don't set timeout.
        * gdb.base/list.exp (test_forward_search):  Only use local timeout.
        * gdb.base/printcmds.exp (test_print_string_constants
        test_print_array_constants):  Don't set timeout.
        * gdb.base/ptype.exp:  Don't set timeout.
        * gdb.base/recurse.exp:  Don't set timeout.
        * gdb.base/return.exp:  Don't set timeout.
        * gdb.base/watchpoint.exp:  Don't set timeout.
        * gdb.c++/classes.exp (do_tests):  Don't set timeout.
        * gdb.c++/virtfunc.exp (test_virtual_calls):  Don't set timeout.

Wed May 10 16:03:23 1995  Torbjorn Granlund  <tege@adder.cygnus.com>

        * Makefile.in: Make clean targets work also when SUBDIRS is empty.

Mon May  1 07:32:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp: Disable chill tests for irix5.

Wed Apr 26 07:36:03 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/scope.exp: Make test names unique.  Use gdb_test.  Make
        each test pass or fail.

Sun Apr 23 21:32:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/opaque.exp: Remove xfails for aix; print a warning if
        xlc not gcc.

Fri Apr 21 15:44:02 1995  Stu Grossman  (grossman@rtl.cygnus.com)

        * cpu32bug.exp est.exp rom68k.exp:  Delete.  Unify into monitor.exp.

Wed Apr 19 17:41:21 1995  Stu Grossman  (grossman@cygnus.com)

        * config/est.exp:  Fix copyright and comments.  Remove dead code.
        Use targetname, serialport and baud variables instead of fixed
        constants.
        * config/rom68k.exp:  Fix copyright and comments.  Remove dead code.
        * config/cpu32bug.exp:  New file to support cpu32bug monitors.

Wed Apr 19 13:47:16 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/watchpoint.exp: Don't run
        test_watchpoint_triggered_in_syscall for sunos.

Mon Apr 17 12:48:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h;
        they don't seem to exist.  Do include stdio.h.

Fri Apr 14 09:40:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/a1-selftest.exp: Add alpha xfail.

Mon Apr 10 13:07:50 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/watchpoint.c (main): Prompt before calling read().
        * gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall):
        Revise accordingly.  Remove cruft about sending "123" several
        times, until it gets noticed.  Clean up the "print buf[0]" stuff
        so that it passes or fails, and waits for prompts in the usual way.

Sun Apr  9 09:02:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/recurse.exp: Fix comment.

        * TODO: Remove item about printing variables in nodebug.exp.  Add
        item about enabling tests which are only run on some targets.

        * gdb.base/watchpoint.exp: Various cleanups (make each test pass or
        fail, make test names unique, use new gdb_test convention
        regarding pattern, use gdb_test more, etc.).

        * gdb.base/bitfields.exp: Various cleanups (make each test pass or
        fail, make test names unique, etc.).

Sat Apr  8 02:47:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/nodebug.c:  Change return type of top and middle to
        short.
        * gdb.base/nodebug.exp:  Remove xfails for ecoff systems, they
        are fixed by the recent mdebugread.c changes. Allow `short ()'
        as type for top and middle.

Thu Apr  6 08:54:18 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/break.exp: Remove commented out if $usestubs {}.  As
        nearly as I can tell, the whole thing was an accident in Stu's
        change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant
        to replace a send/expect pair with gdb_test, but ended up only
        adding the gdb_test.  My change of 24 Mar 1995 and Kung's change
        of 30 Mar 1995 took care of it, but left this vestigial comment
        which I am now nuking.

Mon Apr  3 09:00:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/break.exp: Look for different line number for
        breakpoint at main depending on usestubs.

Sun Apr  2 08:15:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/list.exp:  Adjust some alternate expect patterns to
        match recent list0.c change. Add alternate expect pattern for
        output from `list default lines around main' for optimizing
        compilers.

Sat Apr  1 07:23:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp: If nosignals is not set, set it to 0.

Fri Mar 31 16:13:48 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * config/slite-gdb.exp: Responds to load symbol table prompt.
        * gdb.base/break.exp: Adjust line number, fix rerun.
        * gdb.base/langs0.c: Add #ifdef usestubs.

Thu Mar 30 15:36:55 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * gdb.base/list.exp: Adjust line contents after adding new lines in
        list0.c. Also fix a syntax error.

        * lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs.
        * gdb.base/break.exp: ditto.
        * gdb.base/list.exp: ditto.
        * gdb.base/bitfields.c: Add #ifdef usestubs in main().
        * gdb.base/run.c: ditto.
        * gdb.base/list0.c: ditto.
        * gdb.base/funcargs.c: ditto.

Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)

        * testsuite/config/rom68k.exp (gdb_target_rom68k):  Use
        $targetname, $serialport and $baud instead of hardwired variables.
        * testsuite/gdb.base/{sigall.exp signals.exp}:  Skip these if the
        target doesn't support signals.

Wed Mar 29 12:29:34 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * lib/gdb.exp (runto_main): Fix regular expression bug, add return 1.

Tue Mar 28 08:46:45 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/recurse.exp: Make test names unique.  Change \\(+ to \\(.
        Don't rely on the value of an auto variable before it has been
        initialized.  Use gdb_test more.

Mon Mar 27 08:00:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp (default_gdb_version): A version number must start
        with a digit, but other than that contains all characters up to
        the first whitespace character.

Sun Mar 26 13:19:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/commands.exp (breakpoint_command_test): New tests.

Sat Mar 25 15:38:06 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.c++/*.exp: Warn if executable does not exist.  The original
        reason for skipping the warning was that configure.in sometimes
        intentionally skipped building the executables but the tcl code
        had no way of knowing.  That (a) was always bogus with respect to
        error handling, (b) is no longer true (right now there is no way
        to skip C++ tests).

        * gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.

Sat Mar 25 01:16:10 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/list.exp:  Add expect patterns for output from
        SunPRO compiled executables.
        * gdb.base/whatis.exp:  Allow leading `signed' for all v_signed_*
        types.

Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/break.exp (test_next_with_recursion): Accept any line
        number (we are already testing that the correct source line text
        gets printed).

        * gdb.base/break.exp: Make one test if $usestubs.  I'm not sure
        that is what is intended, but something needed to be done to get
        sunos4 native working again.

        * gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).

        * gdb.base/a1-selftest.exp (test_with_self): Remove comment which
        apparently went with a (very) old xfail.

Fri Mar 24 13:41:09 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * gdb.base/callfuncs.exp: call runto_main instead of runto main.
        runto_main is a proc in gdb.exp that will do 'step' for target use
        stubs.
        * gdb.base/exprs.exp: ditto.
        * gdb.base/interrupt.exp: ditto.
        * gdb.base/opaque.exp: ditto.
        * gdb.base/printcmds.exp: ditto.
        * gdb.base/ptype.exp: ditto.
        * gdb.base/scope.exp: ditto.
        * gdb.base/setvar.exp: ditto.
        * gdb.base/signals.exp: ditto.
        * gdb.base/twice.exp: ditto.
        * gdb.c++/classes.exp: ditto.
        * gdb.c++/inherit.exp: ditto.
        * gdb.c++/templates.exp: ditto.
        * gdb.base/break.exp: no run and hit main for stubs. Change line
        numbers for breakpoints and info breakpoint.
        * gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
        breakpoint().
        * gdb.base/callfuncs.c: ditto.
        * gdb.base/exprs: ditto.
        * gdb.base/interrupt.c: ditto.
        * gdb.base/opaque0.c: ditto.
        * gdb.base/printcmds.c: ditto.
        * gdb.base/ptype.c: ditto.
        * gdb.base/scope0.c: ditto.
        * gdb.base/setvar.c: ditto.
        * gdb.base/signals.c: ditto.
        * gdb.base/twice.c: ditto.
        * gdb.c++/misc.cc: ditto.
        * gdb.c++/templates.cc: ditto.

Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.).

        * gdb.base/a1-selftest.exp: Don't check for # followed by a digit
        somewhere between `read' and `main.c'.  I'm pretty sure the
        pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
        and it isn't particularly useful.

        * gdb.base/scope.exp: Make test names unique.  \[(\] -> \\(.

Thu Mar 23 14:58:35 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/commands.exp (infrun_breakpoint_command_test): New test.

Wed Mar 22 18:36:05 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * config/mt-slite: add LIBS and -nostdlib.
        * config/slite-gdb.exp: add this new file to support sparclite target.

Tue Mar 21 21:41:04 1995  Doug Evans  <dje@canuck.cygnus.com>

        * config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code.

        * gdb.base/a2-run.exp: Change argument to istarget from
        "*-*-vxworks" to "*-*-vxworks*".
        * gdb.base/{break.exp,default.exp,scope.exp}: Likewise.

Tue Mar 21 17:08:47 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * lib/gdb.exp: add proc runto_main, for targets that use stubs, this
        will not runto main but do a 'step' to step out of breakpoint().
        * config/mt-slite: add -Dusestubs.

Tue Mar 21 12:14:12 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@
        instead of just @.

        * gdb.base/signals.exp: Add test for "handle all print".
        * TODO: Remove "handle all print".  Also remove item about
        checking copyright date (I don't like the idea of a spurious FAIL
        based on when we run the tests).

        * gdb.base/recurse.exp: Enable test for SunOS4.  xfail one test
        for SunOS4 (reason for failure not investigated).  Remove
        redundant test for $binfile.

        * gdb.base/nodebug.c (array_index): Call malloc.

        * gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique.

Mon Mar 20 10:08:17 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/recurse.exp: Update gdb_test invocation to use new
        conventions and slightly simplify the matching regexp.

Fri Mar 17 05:43:28 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/break.exp: Update gdb_test invocation to use new
        convention.

        * lib/gdb.exp: If noargs is not set, set it to 0.

        * gdb.base/nodebug.exp: Comment out redundant test.  Make name of
        tests unique.

        * lib/gdb.exp: Skip CHILL for AIX and Solaris.

Thu Mar 16 16:27:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have
        one argument of type "<non-float parameter>".

Wed Mar 15 15:54:56 1995  Stu Grossman  (grossman@cygnus.com)

        * config/rom68k.exp:  New file to support Motorola IDP board.
        * gdb.base/a2-run.exp:  Skip this file if noargs is set.
        * gdb.base/break.c:  Change things around so that this program
        doesn't depend upon args.  This is necessary to make remote
        targets work (in general, they can't take args).
        * gdb.base/break.exp:  Don't try to send args to program.  Don't
        expect output.  Also, replace lots of code with gdb_test.

Wed Mar 15 04:11:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/printcmds.exp (test_character_literals_accepted): Test
        printing of '\'' (which is what the comment says we are testing,
        even though we were not), not '''.
        (test_integer_literals_rejected): Test that printing ''' is an error.

        * gdb.fortran/exprs.exp, gdb.fortran/types.exp,
        gdb.chill/chexp.exp, gdb.base/printcmds.exp,
        gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
        gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
        Use gdb_test not test_print_accept.
        * lib/gdb.exp: Remove test_print_accept.

        * gdb.base/signals.exp (signal_tests_1): Make pass message
        consistent with fail message.

        * gdb.base/whatis.exp: Remove xfails for printing char vs.
        unsigned char; the bug (PR 1821) is fixed.

        * gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868.

        * gdb.base/scope.exp (test_at_localscopes): Call pass for
        successful tests--makes xfailing them work right.

Tue Mar 14 07:39:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect
        only \r\n, not .*.  The test can pass .* as the last thing in
        $pattern if that is what it wants.  In addition to providing this
        flexibility, this change should speed up pattern matching in cases
        where the pattern already ended with .* (there were a number of
        them).  This change also helps catch bad patterns--in the old
        scheme the typo "char \*" instead of "char \\*" would pass.  Now
        it is caught.
        * Many .exp files: Update callers.

        * gdb.base/funcargs.exp: Replace \[(\]+ with \\(.  The latter is
        clearer and does not spuriously match multiple ('s.  Likewise for
        ) and *.

        * gdb.base/nodebug.exp: Test ability to call a function and pass
        it a string (even with no debugging info).

        * gdb.base/printcmds.exp (test_integer_literals_rejected): Change
        "p '\'", which is the same as "p ''" once tcl gets done with
        quoting, to "p '\\'", which I suspect is what is intended (one
        backslash gets sent to GDB).

        * gdb.base/printcmds.exp (test_artificial_arrays): New tests.

Fri Mar 10 13:31:46 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/a1-selftest.exp: Remove xfail for solaris.  The bug (PR
        1817) was fixed literally years ago.

Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/funcargs.exp (call_after_alloca):  Remove `next'
        test, it causes stepping out of call_after_alloca_subr with
        optimizing compilers.
        (localvars_in_indirect_call):  Consume GDB prompt if `finish'
        fails.

        * gdb.c++/templates.exp:  Source templ-info.exp only if
        the templates executable exists.

        * gdb.c++/misc.cc (class Contains_static_instance,
        class Contains_nested_static_instance),
        gdb.c++/classes.exp (test_static_members):  Test printing of
        a class that contains a static instance of the class.

Thu Mar  9 11:43:55 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/langs2.c (cppsub_): Don't prototype.
        * gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value
        only, I believe).

Wed Mar  8 10:29:33 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp (skip_chill_tests): New procedure.

        * gdb.base/signals.exp (signal_tests_1): xfail for irix.

Mon Mar  6 10:44:06 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of
        each expect pattern.  Cuts runtime from 12 to about 4 seconds.

Thu Mar  2 05:31:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/langs.exp: Don't insist that foo__Fi be demangled.

        * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only
        disassemble 8, not 16, instructions for part 4.

        * config/vx-gdb.exp (gdb_start): Use \030, not \CX.  tcl doesn't
        support the latter anymore.

        * gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try
        -DNO_PROTOTYPES.
        * gdb.base/callfuncs.c: Control use of prototypes based on
        NO_PROTOTYPES, not __STDC__.
        * gdb.base/callfuncs.exp (do_function_calls): xfail one of the
        t_float_values2 tests if prototypes in use.

        * gdb.base/callfuncs.c (t_float_values, t_float_values2,
        t_double_values):  When checking differences against DELTA, check
        that difference is within the range (-DELTA,DELTA), not just
        (-infinity,DELTA).

Tue Feb 28 16:28:54 1995  Kung Hsu  <kung@mexican.cygnus.com>

        * config/mips-gdb.exp (gdb_load): In every test case, we need to do
        'file' command firts, then 'target', then 'load', this is due to gdb
        target set up.
        * config/mips-gdb.exp: Fix a couple regular exp bugs.

Thu Feb 23 17:44:55 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing
        FP load/store variants.
        * gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants.

Wed Feb 22 18:29:08 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>

        * gdb.base/term.exp: Do not give a warning if not native, it is
        not an abnormal condition.

Tue Feb 21 13:08:47 1995  Jim Kingdon  <kingdon@cygnus.com>

        * gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype
        t_char_array".

Sun Feb 19 13:10:06 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>

        * lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we
        are getting the version number.

        * gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning
        if not native, it is not an abnormal condition.

Thu Feb 16 15:56:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp: Just use "file exists", rather than undocumented
        dejagnu procedure "findfile".

Thu Feb 16 10:30:24 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

        * config/mt-vxworks (CFLAGS): Set to -g -Dvxworks.
          (LDFLAGS): Set to -Xlinker -Ur.

        * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS):
          Removed, these values are set by lib/gdb.exp.

        * lib/gdb.exp: If GDBFLAGS is unset, set it to -nx.

Wed Feb 15 14:23:28 1995  J.T. Conklin  <jtc@rtl.cygnus.com>

        * config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead
          of replicating gdb startup code.

        * config/mt-vxworks (LDFLAGS): Set to -r.
          (CFLAGS_FOR_TARGET): Removed.

        * config/vx-gdb.exp: always set prompt; gdb.exp sets it to
          (gdb) and gdb for vxworks uses (vxgdb).

        * Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb
          executable is not in the tree and host != target, use sed and
          program_transform_name to determine the gdb name used by the
          target.

        * configure.in, gdb.{base,c++,chill}/configure.in: changed so
          *-*-vxworks* matches vxworks and *-*-netware* matches NetWare.

Sun Feb 12 08:11:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing
        floats, chars, and shorts where there are ANSI-style function
        definitions.

        * gdb.base/langs.exp, gdb.base/langs*: New test.
        * gdb.base/Makefile.in: Build it.
        * TODO: Remove item about checking that C names don't get C++
        demangling applied; this test tests it.

Thu Feb  9 12:43:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/weird.exp: Remove "Haven't examined" comment which
        went with the const70 xfail.  The xfail went away a year ago.

        * gdb.base/signals.exp: Rename a bunch of tests to give unique names.

        * gdb.base/corefile.exp: Give backtrace test unique name.  xfail
        for hp300.

        * gdb.base/interrupt.exp: Also xfail hpux (for hp300).

        * gdb.base/a1-selftest.exp: Don't run on hp300.

Sat Feb  4 15:04:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in (site.exp): Set host_alias and target_alias as well
        as host_triplet and target_triplet.

Wed Feb  1 08:03:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/a1-selftest.exp: Invoke stty before starting inferior.

        * gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same
        places as other ecoff systems).

        * gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on
        ultrix.

Mon Jan 30 11:44:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't
        remove them.
        * gdb.base/nodebug.exp: Accept "function" in addition to "text
        variable and "variable" in addition to "data variable".
        * gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX.

        * gdb.base/list.exp (test_forward_search): Set listsize to 4 not
        2.
        * gdb.base/list1.c (long_line): Add additional statement at start
        of function.
        * gdb.base/list.exp (test_forward_search): Update line number to
        reflect new statement.

Sun Jan 29 13:34:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/signals.exp:  Reinitialize searched source directories
        after gdb_start call.

Sat Jan 28 01:34:44 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/Makefile.in (clean): Delete "errs" file.
        * gdb.stabs/Makefile.in: Likewise.

        * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last
        change.  Instead split the tests into smaller pieces.
        * gdb.disasm/hppa.s: Corresponding changes.

Fri Jan 27 09:24:51 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
        Quote ^C when passing it to stty.  For some shells ^ is a pipe.

        * gdb.base/funcargs.exp: Modify many tests so that every test
        either passes or fails.  Make some test names unique.

Thu Jan 26 19:20:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
        Call stty to set interrupt character.

        * gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check
        for HP assembler versus GNU assembler based on actual behavior of
        $(CC), rather than assuming that $(AS) is always the GNU assembler.

        * TODO: Suggest a few more stepping tests.

Wed Jan 25 14:52:41 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/default.exp: xfail no-stack backtraces for h8300,
        restart GDB for h8300 after a continue.
        (return): Add pattern to match a29k-udi behavior.
        * gdb.base/nodebug.exp: Remove obsolete comment.
        * gdb.base/regs.exp: New file, testing of register displays.
        * gdb.base/return.exp: Fix typo in reference to $objdir.
        * gdb.base/whatis.exp: Always start with a fresh GDB.

Wed Jan 25 11:12:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout
        higher, these tests generate a lot of output.

Tue Jan 24 07:58:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp (gdb_test): Remove catch from around the send.  The
        code following the catch silently ignored some errors; without the
        catch they should be thrown like any other tcl error.  Also, the
        catch used "" instead of {} which meant all the callers who wanted
        to include one of the characters "[]$ had to quote it an extra time.
        * gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp,
        ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp,
        demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp:
        Remove extra quoting.

Mon Jan 23 21:57:54 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/commands.exp: Make test names unique; every test either
        passes or fails.  Update some comments.

        * gdb.disasm/hppa.exp (do_system_control_tests): Update.

Sat Jan 21 15:34:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        The following fixes a FAIL caused by the fact that the alpha stabs
        configuration didn't use the ".if alpha" code in weird.def.
        * gdb.stabs/weird.def (v_comb): Use type attribute to specify 32
        bit pointer, so the 32 bit version works even on the alpha.
        * gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}:
        Remove the stuff which allowed us to have separate versions for
        alpha and everything else.

        * gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix
        regexp which "info func operator\[\](" is supposed to match.  Fix
        string to send to GDB.  Note that GDB still doesn't work right.  Add a
        new test for "info func .perator\[\](" which GDB does handle correctly.

        * gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems.

Fri Jan 20 12:14:23 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp,
        gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp,
        gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp,
        gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff;
        it makes the tests harder to understand and confuses test-o-matic.
        The preferred style is that each test provides a PASS or a FAIL,
        and has a unique message (e.g. "continue #54" not just "continue")
        which is the same for the pass and the fail.
        * gdb.fortran/exprs.exp, gdb.fortran/types.exp,
        gdb.chill/chexp.exp: Move test_print_accept and test_print_reject
        to lib/gdb.exp.
        * gdb.base/printcmds.exp: Use test_print_accept.  Remove
        prt_accept which was basically the same thing.  Likewise for
        test_print_reject and prt_reject.
        * lib/gdb.exp (test_print_reject): Add some more error message
        patterns to match from the former printcmds.exp (prt_reject).
        * gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails.
        One defect of the passcount stuff is that some of it failed to
        report XPASS where appropriate.
        * gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra
        stuff before and after arg in expected pattern.
        (test_paddr_operator_functions): Re-do test without print_addr_of;
        this is the only test which seems to want extra stuff there.

Tue Jan 17 10:47:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/nodebug.exp: Update new tests to reflect improved
        wording of gdb output.

        * gdb.base/nodebug.exp: Add tests to check that "print", "whatis"
        and "ptype" work on variables in files compiled without -g.
        Replaces commented out "maint print msymbol" tests.

Mon Jan 16 12:13:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/setvar.c (dummy): Call malloc.

        * gdb.stabs/aout.sed: Enclose comments within a sed command to avoid
        losing with the irix4 sed.

        * gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal
        ALRM" on irix4.

Sun Jan 15 21:58:26 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * TODO: Remove items about corefile.exp testing new exec-file and
        backtrace; both are now done.  Add items about printing enums.

Sat Jan 14 11:25:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/sigall.exp (test_one_sig): Attempt to recover if
        "get signal $thissig" test fails.

        * gdb.base/setvar.exp: Check for and reject crazy expected type hacks.

Thu Jan 12 01:14:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid
        compiler warning with dec alpha compiler.

        * gdb.base/commands.exp (if_while_breakpoint_command_test): Remove
        extra \n from gdb_test call (this explains why the prompt test
        that I removed yesterday was there).
        (user_defined_command_test): Remove extra \n and prompt test.

        * gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST
        doesn't exist.  Likewise if SIGIO == SIGPOLL, pretend SIGPOLL
        doesn't exist.
        * gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL.
        Also remove alpha workaround, which turns out to be because
        SIGABRT == SIGLOST.

        * gdb.base/sigall.exp: Add workaround for alpha weirdness.

        * gdb.base/help.exp: Don't test "help show".

Wed Jan 11 14:37:04 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/commands.exp: Call gdb_exit and gdb_start so that
        "set print address" is on.
        * gdb.base/commands.exp (if_while_breakpoint_command_test): Don't
        pass prompt to gdb_test; gdb_test already looks for the prompt.

        * gdb.base/help.exp: Replace most of docstring for "define" with ".*".

        * gdb.base/a1-selftest.exp: Don't test "maint dump-me".  That test
        was a vestige of the manual TESTSTRATEGY, and the purpose of it
        was to make sure that gdb can read a core file.  But (a) the "read
        the corefile" part didn't make it to a1-selftest.exp, we just
        delete the corefile after creating it, and (b) we test reading
        corefiles in corefile.exp anyway.  Also, this test left around a
        xgdb process on Solaris.

        * gdb.base/corefile.exp: Also test backtrace.

Wed Jan 11 00:14:40 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/commands.exp: Test a simple user defined command with
        arguments and if/while statements; verify the full user command is
        printed by "show user".

        * gdb.base/commands.exp: Test if/while commands as part of a
        breakpoint command list; verify they appear in breakpoint
        information.

Wed Jan 11 00:47:58 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather
        than by dividing by zero.

Tue Jan 10 21:38:05 1995  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems
        performing an inferior call with watchpoints enabled.
        * gdb.base/watchpoint.c (main): Delete second unnecessary read
        call.

Tue Jan 10 18:42:07 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo
        of "file" command.

        * gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo):
        Add additional pattern for when "int operator int(void);" appears
        in a different order.

Mon Jan  9 16:22:46 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>

        * gdb.base/signals.exp: Call gdb_exit and gdb_start.

        * gdb.base/help.exp: Replace most of docstrings for "info signals"
        and "signal" with ".*".

Wed Jan  4 11:35:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add note about "handle all nostop".

        * gdb.base/{sigall.c, sigall.exp}: New test.
        * gdb.base/Makefile.in: Add it.

Thu Jan  5 17:34:03 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument
        when invoking GDB, suppresses any windowing interface.

Mon Jan  2 17:40:21 1995  Stan Shebs  <shebs@andros.cygnus.com>

        * config/sim-gdb: New file, simulator testing support.

Wed Dec 28 12:21:50 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/interrupt.exp: Test calling func1 twice.

Wed Dec 21 12:51:37 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>

        * gdb.base/list.exp (test_forward_search): Set timeout higher
        when we'll be getting lots of output from gdb.

        * gdb.base/a1-selftest.exp: Move code that was inside expect -re
        "init_malloc" to after the expect statement.  Run it if that
        regexp is taken, but also for two others which happen if source
        cannot be found.

Tue Dec 20 12:35:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/printcmds.exp: New test, for printing register before
        program is running.

Mon Dec 19 00:32:55 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/list.exp:  Correct some alternate expect patterns
        to reflect changes in list1.c.

Sat Dec 17 14:20:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add item regarding large frames.

        * gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test.

        * TODO: Remove item about enabling return.exp; it
        is enabled.  Suggest a few more "return" tests.

Sat Dec 17 02:33:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.c++/misc.cc, gdb.c++/inherit.exp:  Add testcases for
        anonymous unions.

Tue Dec 13 11:26:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o
        and pr-5646.o, so "make" is the same as "make all", not "make
        pr-4975.o".

Wed Dec  7 19:02:02 1994  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/list.exp: Adjust expectations to reflect changes in
        list1.c.
        (test_forward_search): New test proc.
        * gdb.base/list1.c (long_line): New function, has long source line.

Thu Dec  1 23:14:49 1994  Stan Shebs  <shebs@andros.cygnus.com>

        * gdb.base/a1-selftest.exp: Change initial stepping to know about
        additional line of code that was added.

Wed Nov 30 19:43:14 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.s: Break the large branching tests into smaller
        tests so as not to overflow expect's input buffers.
        * gdb.disasm/hppa.exp: Corresponding changes.

Fri Nov 25 13:37:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        Beginnings of template debugging tests.
        * gdb.c++/templ-info.cc:  New file to test for template
        debugging capability of the compiler.
        * gdb.c++/Makefile.in:  Add rule to build templ-info.exp from
        templ-info.cc.
        * gdb.c++/templates.cc:  Add explicit template instantiations
        to enable compiling with -fno-implicit-templates. Add destructor
        and 'value' method to T5 class for template tests.
        * gdb.c++/templates.exp:  Add testcases for printing of template
        types, setting breakpoints on template methods and calling a
        template method. 

Sat Nov  5 00:20:17 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the
        branch target since some assemblers (gas-2.5)  may emit a
        relocation for the branch instead of resolving it in the
        assembler.

Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/a1-selftest.exp:  Remove RS/6000 xfail for backtrace
        through signal handler.

Fri Oct 21 11:10:16 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * configure.in (*-*-netware): Use config/mt-netware.

        * config/mt-netware: New file.
        * config/mt-i386-netware: Removed, separate configs for different
          netware architectures are no longer needed now that we have
          --with-headers.

Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/exprs.exp:  Remove xfail for alpha, it is fixed
        by the recent changes to use ANSI C arithmetic conversions.

Sun Oct  9 07:44:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache
        bug involving using inferior_pid to figure out whether to select a
        frame.

Wed Sep 28 23:12:02 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to
        match the current disassembler output.

Fri Sep 16 11:42:41 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdb.fortran/exprs.exp: Expect VOID instead of void.
        * gdb.fortran/types.exp: Escape the expected '*'s in Fortran
        types, expect "int" as type of integer values (for now).

Wed Sep  7 23:33:51 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/commands.exp: New tests for if/while commands.

Tue Sep  6 13:16:11 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * lib/gdb.exp (runto):  Replace sub-pattern for hex value
        by .*, since hex values have different syntax in Chill mode.

Tue Sep  6 02:15:51 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.c++/demangle.exp (test_arm_style_demangling):  Remove
        linefeed from expect pattern for repeated types with indices > 9.

Mon Aug 29 14:20:44 1994  Stan Shebs  (shebs@andros.cygnus.com)

        First part of Fortran test suite.
        * gdb.fortran: New directory.
        * gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files.

Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/default.exp:  Update expect pattern for load command
        without arguments.

Wed Aug 24 13:15:02 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)

        * configure.in: Change i386 to i[345]86.
        * gdb.base/configure.in: Likewise.
        * gdb.c++/configure.in: Likewise.
        * gdb.chill/configure.in: Likewise.

Tue Aug 23 19:14:06 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * lib/gdb.exp (gdb_run_cmd): Move comment out from between expect
        patterns, since that is not a valid context for comments.

Fri Aug 19 15:07:30 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for
        repeated types and repeated types with indices > 9.

Tue Aug 16 15:57:52 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with
        2417; old bug has been fixed.

Fri Aug 12 19:35:41 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/interrupt.exp: When trying to wake up the inferior,
        send the newline ourselves instead of assuming gdb_test will do
        so when passed an empty input string.

        * gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the
        stabs testcode.

Fri Aug  5 17:01:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * lib/gdb.exp (gdb_test): Don't send anything if the first
          argument is an empty string.  This makes cases where we want to
          match output that is already in expect's buffers (for example,
          matching a breakpoint after gdb_run_cmd has been called) work
          reliably.

Tue Aug  2 10:24:08 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * config/netware.exp: New file.

Thu Jul 28 12:54:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * config/mt-slite (LDFLAGS): If using the newlib in the tree, set
          the -B and -L prefixes so we can find the debugging stub.

        * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
          there and we are using the gcc from the tree.

        * gdb.base/types.c: Removed.

        * gdb.base/configure.in: Look for makefile fragments in ../config.
          Recognize i386-*-netware.
        * gdb.c++/configure.in: Likewise.

Mon Jul 25 23:48:50 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/corefile.exp:  Change `else if' to `elseif', which is
        the correct TCL syntax.

Mon Jul 25 15:35:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * gdb.base/opaque.exp: use runto instead of messing around with
          breakpoints.  Simplify by using gdb_test.

        * gdb.base/bitfields.exp: restart between tests on netware targets
          because breakpoints aren't relocated after target death.  Run
          processes to completion.

        * gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd.

Sun Jul 24 09:55:51 1994  Fred Fish  (fnf@cygnus.com)

        * Makefile.in:  Remove extra tabs that confuse some versions
        of "make".  Use the newly built gdb to test with by default,
        rather than the first one in the tester's search path.

Sat Jul 23 15:05:47 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdb.base/whatis.exp (v_signed_short_array): Fix a typo.

        * gdb.base/help.exp: Update expected add-symbol-file, ignore, and
        condition help.

Tue Jul 19 10:26:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd.

        * lib/gdb.exp (gdb_run_cmd): New function, used to start program
          running.
        * gdb.base/bitfields.exp: Use gdb_run_cmd to start program.
        * gdb.base/funcargs.exp: Likewise.

        * gdb.base/bitfields.exp: Simplify by using gdb_test.
        * gdb.base/funcargs.exp: Likewise.

        * lib/gdb.exp (gdb_test): if match times out, don't call fail if
          message is "".

Mon Jul 18 12:18:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug,
          return,signals,twice}.exp: Handle non-existant binaries
          consistantly.

        * gdb.base/corefile.exp: Execute coremaker to generate core dump.
        * gdb.base/Makefile.in: Don't try to generate a core dump, we
          might testing a cross development system.

Thu Jul 14 18:13:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the
          runtest script is relative to ${srcdir}, not ${rootdir}.

Thu Jul 14 14:56:59 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdb.base/signals.exp: Allow for optionality of breakpoint
        address.

Thu Jul 14 11:21:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.base/{ptype.exp,ptype.c}: Add t_char_array test.

Tue Jul 12 12:22:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)

        * gdb.c++/cplusfuncs.cc: Include <stddef.h>, not <sys/types.h>,
          for size_t definition.
        * gdb.c++/templates.cc: Likewise

        * config/mt-i386-netware: New file.

        * gdb.base/interrupt.c: Do not test if errno == EINTR if it's not
          defined.

        * gdb.base/Makefile.in: Added support for systems that name core
          files by appending "core" to the program name.
        * gdb.base/a1-selftest.exp: Likewise.

Mon Jul 11 23:59:18 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/return.exp:  Add comment and message for `return double'
        test failure on Sparc Solaris.

Mon Jul  4 12:10:48 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * lib/gdb.exp (runto): Allow for optionality of breakpoint address.

Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.c++/misc.cc:  Instantiate classes to inhibit the compiler
        from optimizing them away.
        * gdb.c++/classes.exp, gdb.c++/inherit.exp:  Update ptype expect
        patterns to include default constructors and assignment operators,
        to match gcc versions beyond 2.5.8. Accept any cplus demangling
        character in the output of the virtual base pointer.

Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.c++/cplusfuncs.exp:  Use string_to_regexp and a regular
        expression match in print_addr_of to avoid unintented matches.
        * gdb.c++/virtfunc.exp:  Accept alternate ptype output of g++
        versions up to 2.5.8.

Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.base/list.exp:  Tweak alternate pattern for listing of an
        included file to run under newer versions of expect.
        * gdb.c++/demangle.exp:  Add spaces to the expect patterns between
        consecutive >'s in templates to accomodate recent cplus-dem.c change.
        Remove xfail for the virtual table of BDDHookV.

Sat Jun 18 12:51:34 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * lib/gdb.exp (string_to_regexp): Set a default result.
        (default_gdb_start): Fix misleading message.

Wed Jun 15 12:10:10 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout:
        Remove all CC, etc definitions.
        * config/mt-hpux: New file.
        * config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove:
        (CFLAGS, LDFLAGS): Define.
        * config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS.

        * Makefile.in (site.exp): Don't insert host_os, etc.
        (just-check): Just use RUNTEST with RUNTESTFLAGS only.
        (distclean): Check existence of subdir.
        * gdb.base/configure.in (hppa*-*-hpux*): Recognize.
        * gdb.base/Makefile.in: General cleanup and simplification.
        Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
        to build executables.   Use default rule to build .o files.
        (EXPECT, RUNTEST, CC): Fix relative pathname.
        (site.exp): Don't insert host_os, etc.
        * gdb.base/signals.c (main): Don't call signal unless SIGALRM
        and/or SIGUSR1 defined.
        * gdb.base/watchpoint.c: Don't include stdio.h a second time.
        * gdb.c++/Makefile.in: General cleanup and simplification.
        Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
        (CFLAGS): Remove.
        (EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname.

Fri Jun 10 10:55:09 1994  Jeff Law  (law@snake.cs.utah.edu)

        * gdb.base/recurse.exp: Misc changes to get tests running again
        after Kung's changes to the watchpoint code.
        * gdb.base/watchpoint.exp: Likewise.

Thu Jun  9 15:16:55 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * lib/gdb.exp (string_to_regexp):  Convert {\} also.

Wed Jun  8 12:12:17 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start.
        * lib/gdb.exp (default_gdb_start): Define.
        * gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp,
        gdb.base/funcargs.exp, gdb.base/opaque.exp,
        gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp,
        gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp,
        gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp:
        Don't call gdb_target_udi in between tests.

Tue Jun  7 08:30:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle
        (which was basically just a local version of the same thing).  In
        addition to avoiding duplication, gdb_test_exact is faster.
        * lib/gdb.exp (gdb_test_exact): Fix typo.

        * lib/gdb.exp (delete_breakpoints): If there were no breakpoints,
        don't give an error.

        * gdb.base/term.exp: Call delete_breakpoints before starting.

        * gdb.base/Makefile.in (EXECUTABLES): Remove t10.
        (t10): Add comment.

Mon Jun  6 18:26:50 1994  Stan Shebs  (shebs@andros.cygnus.com)

        Reorganization of the GDB Test Suite.

        * gdb.base: New directory, contains all the basic tests.
        * gdb.c++: New directory, tests specific to C++.
        * gdb.chill: New directory, tests specific to Chill.
        * gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06,
        gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13,
        gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23,
        gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved
        into appropriate new directories (t00-t17 to base, t20-t23 to c++,
        t30-31 to chill).
        * */gdbme.*: Rename to match appropriate expect scripts.
        * gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c,
        gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c,
        gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h,
        gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c,
        gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c,
        gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c,
        gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c,
        gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c,
        gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c,
        gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files.
        * gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc,
        gdb.c++/virtfunc.cc: New names of C++ files.
        * gdb.chill/chillvars.ch: New name of Chill file.
        * gdb.base/configure.in, gdb.c++/configure.in,
        gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in.
        * gdb.base/Makefile.in, gdb.c++/Makefile.in,
        gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in.
        * configure.in (configdirs): Update to reflect directory changes.
        (target_abbrev): No longer define for any configuration.
        * Makefile.in: Cosmetic improvements to header comments.

Fri Jun  3 18:56:06 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        Various changes to gdb.t31:

        * Makefile.in (gdbme.o):  Compile with -fspecial_UC.
        * gdbme.ch:  Make all key-words and predefineds be upper-case.
        * chillvars.exp:  Expect key-words and predefinds in upper-case.

        * chillvars.exp:  Use gdb_test_exact many places.
        Change expected output for arrays (which now includes index labels).

        * pr-5020.exp, gdme.ch (module PR_5020):
        New test, for PR-5020.

Thu Jun  2 16:02:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * lib/gdb.exp (string_to_regexp, gdb_test_exact):  New procedures.
        * Makefile.in (CHILL_LIB):  Remove bogus redundant definitions.

Sun May 29 22:31:42 1994  Per Bothner  (bothner@kalessin.cygnus.com)

        * Makefile.in:  Fix bit-rot in definitions of CHILL,
        CHILL_FOR_TARGET and Chill_LIB.
        * gdb.t31/gdbme.ch:  Fix syntax of nested array tuples.
        * gdb.t31/Makefile.in:  Add definitions for CHILLFLAGS,
        CHILL, and CHILL_LIB.

Sat May 21 10:05:08 1994  Bill Cox  (bill@rtl.cygnus.com)

        * Revert the previous changes.  Please see Rob's directory
          /lisa/test/rob/progressive/gdb/testsuite for these fixes.

Thu May 19 12:51:00 1994  Bill Cox  (bill@rtl.cygnus.com)

        * Makefile.in, configure.in, config/mips-gdb.exp,
          config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
          config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
          config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
          gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
          gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
          gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
          gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
          gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
          gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
          gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
          gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
          gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
          gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
          gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
          gdb.t24/demangle.exp, lib/gdb.exp:  Check in Rob's testing
          changes from 94Q1.

Wed May 18 17:04:03 1994  Bill Cox  (bill@rtl.cygnus.com),

        * config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
          config/mt-slite, config/mt-unix, config/mt-vxworks: Add
          Rob's new testing fragments.

Tue May 17 15:04:14 1994  Bill Cox  (bill@rtl.cygnus.com)

        * config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp,
          lib/gdb.exp: Replace error proc calls with perror.

Mon May 16 19:00:50 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the
        version also, match on casted version strings, and match on
        gdb startup case where the line numbers might be messed up.

Fri May 13 18:00:27 1994  Bill Cox  (bill@rtl.cygnus.com)

        * config/mt-i960-vx (LDFLAGS): Add '-r' option for test links.
          (CFLAGS): Delete it from here.

Tue May  3 16:08:09 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs.

Fri Apr 29 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * Makefile.in (RUNTEST): Default to just "runtest".

Tue Apr 26 22:21:40 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t17/callfuncs.exp: More comments about t_func_values tests.
        * gdb.t17/gdbme.c (t_func_values): Add comments about how and why
        the code has been restructured.

Thu Apr 21 12:48:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/default.exp (set write): Allow any number of \r and/or
        \n, not just one of each.

        * gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4
        /bin/cc gives a warning if you do.

Thu Apr 21 11:54:04 1994  Kung Hsu  (kung@mexican.cygnus.com)

        * gdb.t24/demangle.exp: change expect pattern of 
        __t10ListS_link1ZUiRCUiPT0

Wed Apr 13 15:05:00 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints
        on local variables in recursive functions.

        * gdb.t07/Makefile.in: Build the new test.

Tue Apr 12 20:45:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t17/gdbme.c (t_func_values): Do not compare function pointers
        directly.  Instead compare the return values from actual calls.

Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)

        * Makefile.in (check): Set TCL_LIBRARY for runtest.

Mon Apr 11 09:15:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * From Peter Schauer with minor modifications.
        * gdb.t15/return.exp (return_tests): Handle targets where "return"
        stops in mid-line in the caller.  Add xfail for returning a float
        value on X86 targets.

Tue Apr  5 15:16:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves
        to avoid expect lossage.
        (fmem_LRbug_tests): Likewise.
        * gdb.disasm/hppa.s: Corresponding changes.

        * gdb.disasm/hppa.exp: Rework escape sequences and end-of-line
        conditions to work with latest dejagnu/expect.

        * gdb.t15/funcargs.exp (finish from indirect call): No longer
        expected to fail on the PA.
        (backtrace in call with trampolines): Explicitly require main
        to be frame #1 (no trampolines should show up in backtrace).

        * gdb.t00/default.exp: Use "exp_continue" rather than obsolete
        "continue -expect".
        * gdb.t06/break.exp: Likewise.
        * gdb.t07/watchpoint.exp: Likewise.
        * gdb.t13/bitfields.exp: Likewise.
        * gdb.t15/{funcargs,return}.exp: Likewise.
        * gdb.stabs/weird.exp: Likewise.
        * config/{mips,udi}-gdb.exp: Likewise.

        * hppa.sed: Enclose comments within a sed command to avoid
        losing with the old OSF1 sed.

Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t02/whatis.exp, gdb.t08/opaque.exp:  Add XFAILs for
        sequent dynix.
        * gdb.t06/signals.exp:  Add clear_xfail for sequent dynix.
        * gdb.t15/funcargs.exp:  Conditionally step again to really
        finish from marker_call_with_trampolines. Handle the case where
        the first step from within call_with_trampolines already steps
        us back to main.
        * gdb.t15/gdbme.c:  Add comment to closing brace of
        call_with_trampolines for funcargs.exp.

Tue Mar 29 23:55:27 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): 
        Fix typo(s).

Sun Mar 27 16:53:14 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t07/gdbme.c: More code for watchpoint testing.

        * gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
        "Hardware watchpoint" throughout file.
        (test_watchpoint_triggered_in_syscall): New test.
        (test_complex_watchpoint): New test.

Fri Mar 25 17:05:31 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdbme.c (call_with_trampolines): New function to try and step
        into.  Tests trampoline problems on the PA.

        * funcargs.exp (localvars_in_indirect_call): No longer expect
        stepping into indirect call to fail on PAs.
        (test_stepping_over_trampolines): New test.

Wed Mar 23 07:43:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestions for static member function tests, and
        completion tests.

Wed Mar 16 08:28:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestions for "p/a" tests.

        * lib/gdb.exp: Set prompt to (gdb) if it isn't already set.
        (default_gdb_exit): Replace all the hair with sending "quit" to
        the process with a simple close.

Tue Mar 15 08:45:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestions for shared library tests.

Sun Mar 13 10:45:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestions for x/s tests.

Fri Mar 11 08:22:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/help.exp: Replace most of docstrings for "tbreak",
        "enable once", and "enable breakpoints once" with ".*".

Thu Mar 10 08:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestions about structure passing tests.

Mon Mar  7 13:45:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t03/gdbme.c:  gcc version 1 puts out the wrong stabs for
        the primary1 test, use work around if __GNUC__ < 2.
        * gdb.t06/signals.c:  Add comments for signals.exp pattern matching.
        * gdb.t06/signals.exp:  Add XFAILs for i386 bsd and vax ultrix.
        Test for bad output rather than waiting for timeout.  Issue
        second continue only if first continue failed.

Wed Mar  2 10:08:01 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do
        operator[] test with gdb_test because the old code didn't seem to
        be getting the quoting right with the new dejagnu.

Thu Feb 24 19:49:25 1994  Rob Savoye  (rob@poseidon.cygnus.com)

        * lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
        one from the path.
        * Makefile.in: Use a fresh expect if there is one, use runtest
        from the src tree if there is one.
  
Thu Feb 24 18:49:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
        next over recursive call.  Revise the tests from that point on
        (which had been skipped) to match GDB's actual (correct) output.

        * gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug
        with next over a breakpoint whose condition is false.

        * gdb.t00/help.exp: Comment out "help set print" tests just like
        (and for same reason as) "help set" test.

Mon Feb 14 09:58:23 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.s (fmemLRbug_tests): New tests.
        * gdb.disasm/hppa.exp (fmemLRbug_tests): Run them.

Sun Feb  6 15:36:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/break.exp (test_next_with_recursion): Remove no longer
        necessary gdb_target_udi.

        * gdb.t03/ptype.exp: For UDI, skip tests which call malloc.

        * gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs
        1838 and 2417; they are fixed.

        * gdb.t02/whatis.exp (v_char_array, v_signed_char_array),
        gdb.t03/ptype.exp (ptype structure, ptype union):
        Remove xfails; the test is looser than when the xfails were added.

        * gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI.
        * gdb.t00/help.exp: Don't expect remote to be in "help target" output.

        * gdb.t01/run.exp: Only run shell test if isnative.

        * config/udi-gdb.exp (gdb_load): Use "file", not "load" command,
        since "run" automatically loads if necessary.  Call gdb_target_udi
        after the "file" since "file" kills any execution target.

        * config/udi-gdb.exp (gdb_start): Don't send "set args main" to
        GDB.  GDB doesn't work that way (not anymore at least) on UDI.
        * gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first
        argument for UDI.

Fri Feb  4 12:19:32 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * gdb.t17/interrupt.c: If we get EINTR, don't print an error message.

        * gdb.t17/callfuncs.exp: Add xfails for rs6000.

Sat Feb  5 09:11:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Re-write demangle to just call gdb_test,
        properly quoting regexps.  This makes the second argument to
        demangle a fixed string, which matches the callers, instead of a
        shell-style pattern which is what the previous implementation
        used.  Update some of the callers.

Sat Feb  5 10:19:09 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.s (comib_tests): Add missing instruction.
        (comib_nullified_tests): Fix typo.
        * gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect
        strings.  No longer expected to fail.

        * gdb.disasm/hppa.s (addib_tests): Fix typo.
        * gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect
        strings.  No longer expected to fail.

        * gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect
        string.  No longer expected to fail.

Fri Feb  4 23:45:11 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string.
        No longer expected to fail.

        * gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect
        string.  No longer expected to fail.

Fri Feb  4 10:35:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Remove a bunch more tests which differ
        only in the names (I probably got most of them).  I was even
        generous with some which differed in underscores in names, and
        probably missed a few, and I *still* was able to remove almost a
        third of the file with almost no impact on testsuite coverage.

Thu Feb  3 12:04:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/default.exp: Match udi_attach error message as well as
        the one from child_attach.

        * gdb.t00/default.exp: Use "." instead of "?" to match a question mark.

        * gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB.

        * gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8.
        * gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it.

        * Move test with enums and partial symbols back to
        gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}.
        Reverts the change of 26 May 93.  Per today's change to
        stabs.texinfo, the behavior that weird.exp was expecting was
        unreasonable; what is important is that the compiler+gdb get
        things right, which happens with a recent gcc.  Also fix the test
        to deal with native compilers which put out the stab gdb can't
        deal with.

Mon Jan 31 15:40:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Remove a bunch of tests which differ only
        in the names.  The main thing these accomplish is to slow things down.
        Many more such duplicates surely remain.

        * gdb.t00/help.exp: Comment out "help support" test just like
        (and for same reason as) "help set" test.

Mon Jan 31 06:43:45 1994  Fred Fish  (fnf@cygnus.com)

        * gdb.t06/break.exp:  Remove setup_xfails for
        sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb.
        * gdb.t20/inherit.exp (test_ptype_si):  Update warning message
        about known bug in gcc to include up through 2.5.8.
        * gdb.t20/inherit.exp (test_ptype_vi):  Accept "_vb." as well as
        well as "_vb$".
        * gdb.t21/cplusfuncs.exp (test_lookup_operator_functions):
        Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass
        with latest gcc and gdb.
        * gdb.t22/virtfunc.exp (test_ptype_of_classes):  Accept "_vb." as
        well as "_vb$".

Sat Jan 29 23:31:26 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * configure.in (hppa*-*-*): Also configure and build stabs-only
        tests.

Thu Jan 27 08:21:16 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.t10/hppa.mt: A makefile fragment for the PA.
        * gdb.t10/configure.in (hppa*-*-*): Use it.

Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t09/corefile:  Increase timeout when spawning gdb explicitly.

Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t06/signals.exp:  Handle blocked SIGTRAP on sun3 for bash
        versions prior to 1.13.5.

Tue Jan 18 20:10:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/default.exp (show prompt): In FAIL case, only match if
        the prompt is at the start of a line.

Mon Jan 17 20:07:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.disasm/hppa.s: Add new tests for sfu and copr instructions.
        Enable "diag" instruction.  Delete copr from fpu_misc_tests, it's
        in the copr tests now.
        * gdb.disasm/hppa.exp: Run new sfu and copr tests.  Do not expect
        copr in the fpu_misc tests anymore.  fpu_misc tests are no longer
        expected to fail.

Fri Jan 14 14:24:21 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp,
        gdb.t31/chillvars.exp, lib/gdb.exp:
        Tweak to run under either version of expect.
        * lib/gdb.exp (default_gdb_exit): Remove "catch" statement.
        * gdb.t00/teststrategy.exp: Use isnative and verbose procedures.
        * gdb.t11/list.exp: Remove extraneous whitespace.

Sat Jan 15 09:57:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t16/printcmds.exp (test_print_strings): Accept
        "(unsigned char *) " before the string.

        * TODO: Add notes about printing of fancy types and GDB expressions.

Thu Jan 13 17:16:09 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * Makefile.in: Pass LDFLAGS and LIBS to sub-makes.
        * gdb.t06/configure.in: Don't try to compile signals test program
        if doing mips-idt-ecoff.        

Thu Jan 13 08:25:55 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * Most .exp files: Tweak to run under either version of expect.

Tue Jan 11 15:21:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t12/scope.exp: Add xfails for rs6000.  Remove 1806 from existing
        xfails; I'm not sure why they are failing, but not because of PR 1806.

Mon Jan 10 22:14:20 1994  Rob Savoye  (rob@darkstar.cygnus.com)

        * config/unix-gdb.exp: Remove gdb_unload cause it's already
        defined in lib/gdb.exp.

Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t07/watchpoint.exp:  Clear xfail for calling function with
        watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined.
        * gdb.t20/gdbme.cc, gdb.t21/gdbme.cc:  Conversion operator functions
        have to be typeless.

Tue Jan  4 09:32:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: Add suggestion for copyright year test.

Mon Jan  3 11:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)

        * configure.in (*-*-lynxos*): Add stabs tests.

Wed Dec  1 21:54:05 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.stabs/hppa.sed: Only lables should ever start in column zero,
        so insert a tab before any assembler directive in column zero.

        * gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword
        stores.
        * gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword
        stores.
        (fpu_short_memory_tests): Likewise.

Mon Nov 22 13:23:22 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/ecoff.mt:  Delete alpha specific if block, fix typo.
        * gdb.stabs/ecoff.sed:  Escape inserted blanks with backslashes, embed
        .stabs directives in comments.

Fri Nov 19 14:09:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * TODO: New file, describing tests we could write.
        * gdb.t09/corefile.exp: Move description of tests to write to TODO.

Tue Nov 16 21:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.exp: Add kludge to force re-sync.

        * gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me"
        to xgdb instead of gdb, get out of gdb.

Tue Nov 16 10:21:57 1993  Rob Savoye  (rob@cygnus.com)

        * lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work
        for info.

Sat Nov 13 23:17:48 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)

        * gdb.stabs/hppa.mt: A makefile fragment for the PA.
        * gdb.stabs/configure.in (hppa*-*-*): Use it.
        * gdb.stabs/hppa.sed: New sed script for the PA.

Sat Nov 13 22:50:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs: Re-write weird.def and configuration to use sed
        instead of cpp.  sed is portable and POSIX; cpp is neither.

Fri Nov 12 15:26:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed.

Mon Nov  8 16:55:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t20/gdbme.cc: Add comment about pmi being optimized out.

Thu Nov  4 23:07:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as
        "_vb$".
        * gdb.t00/teststrategy.exp: Add xfail for RS/6000.
        * gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc.

Wed Nov  3 13:53:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * lib/gdb.exp: Comment out code which depends on non-existent
        `transform' procedure.

Wed Nov  3 11:23:11 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * lib/gdb.exp (default_gdb_exit): Remove `catch "close"'.
        * lib/gdb.exp: Transform tool name.
        * gdb.t*/*.exp: Change error to perror so it works with DejaGnu
        1.1's new error handling system.

Mon Nov  1 10:36:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS.

Fri Oct 29 17:58:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/default.exp: Avoid tests with a lot of .* in them.
        They made pattern matching so slow that timeouts happened on
        heavily loaded systems.  Now any output from "show print" which
        gets us back to the GDB prompt is a PASS.

Mon Oct 25 14:36:50 1993  Stu Grossman  (grossman at cygnus.com)

        * gdb.disasm/hppa.mt:  Use $(srcdir) in hppa.o make rule.

Mon Oct 25 13:35:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.exp: Skip whole file with xfail for HPPA.

        * gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail.
        It is not from PR 3220.

Sun Oct 24 18:49:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which
        just started failing because they depended on the order the
        subcommands are presented, or exact docstring text.  This kind of
        test is a pain and has minimal benefit.

Thu Oct 21 08:26:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t09/corefile.exp: At end of test, use "core" command with
        no arguments.

Wed Oct 20 08:56:02 1993  Stu Grossman  (grossman at cygnus.com)

        * gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16
        17}/Makefile.in:  Make it possible to run the testsuite with Sun
        make and CC = cross gcc by adding explicit build rules for .o
        files.

Tue Oct 19 14:57:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t15/funcargs.exp: Don't put comments on same line as
        setup_xfail (@#$*%& tcl braindamage!).
  
Mon Oct 18 21:50:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile.

Fri Oct 15 15:39:54 1993  Kung Hsu  (kung@cirdan.cygnus.com)

        * gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'.
        * gdb.t20/inherit.exp: remove three dumplicate entries.

Fri Oct 15 13:45:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t06/break.exp: For "next over recursive call", fail on any
        incorrect output, not just on "factorial (value=2)".

Fri Oct 15 11:52:56 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t12/scope.exp:  Remove xfails, filename::var syntax should be
        working now. Add an xfail if accesing a bss variable causes
        a memory error if the target is not yet run.

Thu Oct 14 19:16:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of
        constructor name (2 string), name of _GLOBAL_ demangling (2 strings),
        name of __st* demangling (2 strings).  Did Kung really get the
        more than 95 others right without testing them?

Thu Oct 14 16:27:08 1993  Kung Hsu  (kung@cirdan.cygnus.com)

        * gdb.t24/demangle.exp: clean up XFAILS, more than 100

Thu Oct 14 11:40:30 1993  Jeffrey Law  (law@cs.uah.edu)

        * configure.in (configdirs): Add gdb.disasm
        * gdb.disasm: New directory for GDB disassembler tests.
        * gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA.

Thu Oct 14 11:40:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/help.exp: Don't test "help set".

        * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails
        from within expect statements.  None of these happen anymore and
        they cause regressions to be silently unnoticed.

        * gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure
        messages) about known failures with gcc cygnus-2.4.5-930417.

        * gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on
        comp-info.exp so it gets built if it doesn't exist.

        * gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff;
        it is no longer used.
        * gdb.t13/comp-info.c: Removed.

Wed Oct 13 22:54:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * gdb.t06/signals.exp: Add xfail for sun3.

Thu Oct  7 12:01:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t17/interrupt.exp: Add xfail for Irix (currently not really
        relevant because ^C doesn't get sent but failure can be reproduced
        interactively).

Tue Oct  5 10:43:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/alpha.mt:  New configuration file for alpha.
        * gdb.stabs/configure.in:  Use it.
        * gdb.stabs/ecoff.mt, weird-ecoff.sed:  Change sed script to enable
        sharing with alpha.mt, redefine long to word via preprocessor.
        * gdb.stabs/weird.def:  Conditionally adapt storage layout of v_comb
        for alpha.
        * gdb.stabs/weird.exp:  Handle compilation of weird.s by alpha
        native cc.
        * gdb.t00/teststrategy.exp:  Change expect string so that we
        consume the `(xgdb)' from the command echo and from the gdb prompt.
        * gdb.t05/expr.exp:  xfail "print unsigned int == (~0)" on the alpha.
        gdb currently compares all values as long, so this failure probably
        applies to any configuration where LONGEST is bigger than a target int.
        * gdb.t08/comp-info.c:  New file to determine if gdbme is compiled
        with gcc.
        * gdb.t08/Makefile.in, opaque.exp:  Use it. Alpha native cc is unable
        to handle opaque pointers, gcc is.
        * gdb.t21/gdbme.cc, gdb.t23/gdbme.cc:  operator new takes a size_t
        as first argument. Include <sys/types.h> and change all operator
        new definitions to use size_t.
        * gdb.t21/cplusfuncs.exp:  Handle changes in output for operator new
        now that we use size_t.

Wed Sep 29 00:55:49 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t03/ptype.exp, gdb.t15/printcmds.exp:  When constructing
        a long or float array cast all array members to the same type.
        * gdb.t04/setvar.exp:  Handle the decimal output of an unsigned long
        with 64 bit longs.
        * gdb.t07/watchpoint.exp:  Add finish and until variations encountered
        on alpha.
        * gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Add xfails for alpha.

Tue Sep 28 17:26:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24 (demangle.exp): Constructors of templates have names like
        vector<int>::vector(int) not vector<int>::vector<int>(int).  See
        section 14.6 of the ARM.

        * gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form
        "_vt$MoveCmd"; these differ only in name from "_vt$foo", so they
        accomplish little and slow down the testsuite.

        * gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
        Accept spaces various places.

Tue Sep 21 17:28:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function
        with watchpoint enabled.

        * Makefile.in: Remove definition of CC and remove the second
        definition of CXX (the "CXX = gcc" one remains).  These definitions
        were causing backquotes to be expanded within backquotes, which
        doesn't work.

Sat Sep 18 09:43:21 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)

        * gdb.t17/callfuncs.exp: Add "return 0" to end.

Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/ecoff.mt:  Remove STABSCC hack.
        * gdb.stabs/weird.exp:  Handle the case where weird.o is compiled
        by mips cc and contains no stabs entries.

Thu Sep 16 17:22:12 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * config/vx-gdb.exp: Use fake device to load files rather than
        NFS.
        * lib/gdb.exp: New proc to do "file" command.
        * config/unix-gdb.exp: Use new "file" proc.

Thu Sep 16 13:45:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)

        * config/mips-gdb.exp (gdb_load): Increase timeout to 2400.
        Rework board rebooting slightly.
        (gdb_exit): Don't exit from the remote shell; there isn't one.
        * gdb.stabs/weird.exp: If a program is being debugged already,
        kill it.
        * gdb.t04/setvar.exp: Stop and restart gdb.
        * gdb.t05/expr.exp: Likewise.
        * gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and
        restart gdb and reload the program.
        * gdb.t08/opaque.exp: Likewise.
        * gdb.t12/scope.exp: Likewise.
        * gdb.t13/bitfields.exp: Likewise.
        * gdb.t15/funcargs.exp: Likewise.
        * gdb.t20/classes.exp: Likewise.
        * gdb.t03/ptype.exp: Increase timeout.
        * gdb.t16/printcmds.exp (test_print_string_constants,
        test_print_array_constants): Likewise.
        * gdb.t17/callfuncs.exp (do_function_calls): Likewise.
        * gdb.t20/classes.exp (do_tests): Likewise.
        * gdb.t22/virtfunc.exp (test_virtual_calls): Likewise.

Wed Sep 15 14:24:36 1993  Ian Lance Taylor  (ian@cygnus.com)

        * gdb.stabs: Renamed *wierd* to *weird*.

Wed Sep 15 10:36:50 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)

        * gdb.t13/bitfields.exp: Test for bad output rather than waiting
        for timeout.  Add "known gcc 2.4.5 bug" to failure message.

Tue Sep 14 17:16:44 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)

        * gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name.
        (do_tests): Remove xfail for whatis on one_var and two_var.

Wed Sep  8 23:14:23 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * Makefile.in: Made cross building work better by adding
        {RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS.

Tue Sep  7 14:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t15/{return.c,return.exp,Makefile.in}:
        New test, currently commented out.

Tue Aug 31 16:51:29 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * config/udi-gdb.exp: gdb_exit now kills any isstip processes
        still running and removes the leftover named socket so GDb can do
        clean restarts.

Mon Aug 30 17:55:16 1993  Rob Savoye  (rob@darkstar.cygnus.com)

        * gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the
        console, not GDB.
        * config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so
        cross testing works better with "make check"
        * config/unix-gdb: Use default procedures for exit and version.
        * config/vx-gdb.exp: Cleaned up and massaged back to working order
        with the newest VxWorks.

Thu Aug 26 17:50:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t20/classes.exp: For "ptype class Base1", continue to accept
        old form.

        * gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a
        name (e.g. devo gdb with gcc 2.4.5), it is still a pass.

        * gdb.t10/crossload.exp: Skip whole file (for now, until we fix it).

        * config/unix-gdb.exp: Remove this version of gdb_exit
        * lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp.
        Rob says he'll look at it when he gets back to testing boards.

Thu Aug 26 07:20:00 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * gdb.t22/virtfunc.exp:  Accept missing struct/class names as
        an expected fail for certain ptype commands.

        * gdb.t20/classes.exp:  Update expected results of "ptype class
        Base1" to account for the constructor that now appears in the type.

Wed Aug 25 16:48:05 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * configure.in (configdirs):  Restore gdb.t04, which mysteriously
        disappeared from list.
        * config/{udi-gdb.exp, gdb-unix.exp}:  Replace calls to obsolete
        "alldone" proc with call to cleanup and exit.
        * {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp,
        gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp,
        gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp,
        gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp,
        gdb.t12/scope.exp, gdb.t13/bitfields.exp}:  Replace calls to
        "alldone" proc with simple returns that suppress remaining
        tests.  The alldone proc went away many months ago.

Tue Aug 24 11:04:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests.

        * gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O.

Thu Aug 19 22:08:41 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t15/funcargs.exp:  Allow arguments for main in backtraces
        as vax gdb will display them.

Thu Aug 19 18:18:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t20/gdbme.cc: Do some calculation with v.x, to confound
        optimizers.

        * scope.exp: Change "bad value for localval" messages so each one
        is unique.

        * config/unix-gdb.exp (gdb_exit): Move info on this vs.
        lib/gdb.exp (gdb_exit) from ChangeLog to comments.

        * gdb.t06/signals.exp: Skip the whole file with xfail for delta68.

Tue Aug 17 00:05:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line
        doesn't exist (due to optimization).

Mon Aug 16 21:05:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/wierd.exp: Deal with it if echo of "file" command
        contains \r because the filename is long.

        * gdb.t06/signals.exp: Revise comments regarding "'next' behaved as
        'continue'" bug, and change xfail back to i*86-univel-sysv4*.

Mon Aug 16 03:05:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp,
        gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Update for vax running
        Ultrix.
        * gdb.t02/whatis.exp:  Use procedure to setup xfails on long versus
        int tests.
        * gdb.t08/opaque.exp:  Use procedure to setup xfails for opaque tests.

Thu Aug 12 15:24:28 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * Makefile.in (distclean):  Remove *.log *.plog *.sum *.psum site.*.

        * gdb.t17/interrupt.exp:  Fix 'missing Continuing' case so pattern
        to match does not match the passing case but still matches the 
        failing case.

Thu Aug 12 16:58:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Makefile.in (distclean): Remove *.plog *.sum *.psum site.*.

Wed Aug 11 19:47:27 1993  John Gilmore  (gnu@rtl.cygnus.com)

        * lib/gdb.exp (gdb_exit):  Move the best version of gdb_exit
        to here.  Fix 'Quit anyway.*?' bug (? is a regexp metacharacter).
        * config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}:
        Remove various versions of gdb_exit.
        * config/vx-gdb.exp:  Remove quit_vxgdb, change a caller to call
        gdb_exit.
        * config/unix-gdb.exp:  gdb_exit remains here, and should override
        the generic version, since it's doing a lot of wierd stuff that
        the other versions aren't.  FIXME, fold it in, or abandon this
        version.

Wed Aug 11 12:09:32 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Add tests for PR 3220.

Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_.

Tue Aug 10 15:45:25 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * gdb.t07/watchpoint.exp:  Clear xfail with "i*86-*-*", not just
        "i386-*-*".  Works for i486 as well.

        * gdb.t06/signals.exp:  Rework code that recognizes known SVR4
        bug, and expand domain of xfail to all SVR4 systems, since the
        actual problem is likely to be in generic SVR4 /proc support.

Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/unix-gdb.exp (gdb_load): Add eof to expect statement.

Tue Aug 10 09:56:56 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * gdb.t17/interrupt.exp:  Set up xfail for *-*-sysv4*, in chain of
        xfails for other systems.  Match a missing 'Continuing.' as an
        explicit fail for i*86-*-sysv4*, so it doesn't hose other tests.

        * gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp,
        gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp:
        Only issue warning for missing executables if -all option is used.

        * gdb.stabs/wierd.exp:  Only issue warning for missing wierd.o
        file if -all option is used.  It's like an unpredictable XFAIL.

Mon Aug  9 10:13:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t15/funcargs.exp: Add comments that hppa xfails are only
        for dynamically linked binaries.

        * gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests.

Sun Aug  8 14:21:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t20/inherit.exp: Change message for "print tagless struct"
        to state that this is a known bug in old versions of g++.

Fri Aug  6 21:40:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t17/interrupt.exp:  Add xfail for 386 bsd. Accept echoed newline
        while waiting for `Continuing'.

Fri Aug  6 13:38:08 1993  Fred Fish  (fnf@deneb.cygnus.com)

        * gdb.t10/nodebug.exp:  Expect to find local/global minimal symbols
        in text, data, and bss.
        * gdb.t10/nodebug.c:  Add local and global test variables for
        initialized and uninitialized data.

Thu Aug  5 12:18:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/unix-gdb.exp (gdb_exit): Add "wait".

Thu Aug  5 18:14:06 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t06/signals.exp:  xfail the continue from the handler for all
        targets.

        * gdb.t07/watchpoint.exp:  clear_xfail for i386 when calling a
        function with watchpoints enabled, the i386 call dummy starts with
        a call.

        * gdb.t00/teststrategy.exp, gdb.t09/Makefile.in:  Handle the way
        386 bsd names its corefiles.

Wed Aug  4 08:53:41 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t10/Makefile.in (nodebug.o):  Don't use "-c -o", many
        compilers don't grok it.
        * gdb.t16/gdbme.c (ctable1):  Initialize unsigned char array
        with small octal ints rather than character constants, which
        are signed and might not fit if first promoted to int.

Tue Aug  3 18:28:25 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t09/Makefile.in (clean):  Remove corefile.

Mon Aug  2 12:47:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t07/watchpoint.exp: Add missing `$prompt $'.

Mon Aug  2 12:30:14 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
                          and Jim Kingdon (kingdon@cygnus.com)

        * gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for
        NO_SINGLE_STEP machines.  Fix comment about its cause.  Uncomment
        the `continue' test right after it (also xfailed if NO_SINGLE_STEP).

Fri Jul 30 19:46:55 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t17/interrupt.exp: Add xfail for hppa.

Fri Jul 30 12:54:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp,
        gdb.t09/corefile.exp:  Cleanup xfails for fixed mips bugs.
        * gdb.t13/bitfields.exp, gdbme.c:  Examine a variable in the inferior
        to determine signed-ness of bitfields and use the result to setup
        the xfail.
        * gdb.t15/gdbme.c:  Add comments to the two indirect call0a lines.
        * gdb.t15/funcargs.exp:  Use them to step until the second indirect
        call line is reached if necessary.

Thu Jul 29 20:33:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/wierd.exp: New test, for nameless baseclasses.

Mon Jul 26 00:15:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/break.exp: Also test `clear' command.

Wed Jul 21 18:03:38 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * gdb.t00/teststrategy.exp: Remove extra quote.

        * gdb.t07/watchpoint.exp: Change xfail for calling function with
        watchpoint enabled to be for all non-68k machines.

        * gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test.

Mon Jul 19 23:59:26 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-*
        targets use aout.mt instead of ecoff.mt as gas understands
        standard aout format.

Mon Jul 19 18:14:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)

        * lib/gdb.exp (runto): Don't insist that function we are running to
        was compiled with -g.

        * gdb.t10/{nodebug.{c,exp},Makefile.in}: New test.

        * gdb.t17/interrupt.exp: Before sending ^C, give the inferior time
        to get back into the read system call.
        Accept leading newline in case where we woke it up.

Sun Jul 18 08:40:45 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}:  New files
        to make the stabs test work on ecoff systems using gcc and -with-stabs.
        * gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}:  Modify to
        enable ecoff configuration.

Thu Jul 15 11:54:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t15/funcargs.exp (localvars_in_indirect_call): New test.

Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t16/printcmds.exp: Add another printf test.

Wed Jul 14 15:37:13 1993  Ian Lance Taylor  (ian@cygnus.com)

        * configure.in: If configured -with-stabs on any target, add
        stabsdirs to configdirs.

Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is
        fun" so pattern does not match the command itself.

Mon Jul 12 11:22:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames.

Sun Jul 11 12:03:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t17/interrupt.exp: Test for more things.

Fri Jul  9 14:11:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t07/watchpoint.exp: In until test, deal with the way the DEC
        compiler arranges the code and line numbers.

        * gdb.t17/interrupt.exp: Don't send \n after ^C.

Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t00/help.exp:  Increase expect input buffer size.

Thu Jul  8 14:26:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.exp: Remove sparc xfail; bug fixed.

        * gdb.t07/watchpoint.exp: Add xfail for hppa.

        * gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug.

        * gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint
        [0-9]*, not just [0-9].

Wed Jul  7 17:52:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972.

        * gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use.

Tue Jul  6 13:54:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/help.exp: Replace most of docstring for "continue" with .*.

Mon Jul  5 22:03:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.c: Add xfails for sun3.

        * gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836.

        * gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597.  Also add
        test_stepping tests.

Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t{06,17}/Makefile.in (clean): Remove all executables.

        * gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug.

        * gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c
        rather than actually putting it through cpp twice.

        * gdb.t06/signals.exp: Add xfails for unixware and rs6000.

Fri Jul  2 10:48:03 1993  Ian Lance Taylor  (ian@cygnus.com)

        * config/mips-gdb.exp (gdb_exit): Removed close statement which is
        no longer needed.

Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t06/signals.exp: Add test for sparc bug with do_save_insn.

        * gdb.t20/{classes,inherit}.exp: If a class which doesn't use any
        C++ features prints as "struct", make it a pass, not an xfail.

Thu Jul  1 22:03:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t22/virtfunc.exp: Remove a bunch of xfails.
        Don't require VA to print as "class" rather than "struct".

Thu Jul  1 18:27:40 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.t06/twice.exp: Don't care about the file name GDB prints.

Wed Jun 30 18:01:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end.

Tue Jun 29 13:15:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t12/scope.exp:  Remove xfail for parameter printing in wrong
        order.

Tue Jun 29 09:22:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t16/printcmds.exp: Add printf tests.

        * gdb.t06/{twice.{c,exp},Makefile.in}: New test.

        * gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too.

Mon Jun 28 11:25:59 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t20/classes.exp:  Add clear_xfail's before printing summary
        pass counts, to counteract any existing or future setup_xfails.

Mon Jun 28 09:15:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros
        {BEGIN,END}_COMMON for common block instead of STAB.
        * gdb.stabs/wierd.exp: Add xfail for rs6000.

        * gdb.stabs/wierd.def: Make value of N_GSYM's 0.
        intp_var should be N_GSYM not N_LSYM.
        wierd-aout.S: Use a label for the value of the N_SO.
        wierd.def: Remove all backslashes.
        wierd-{aout,xcoff}.S: Put a few tests with backslashes here.

Mon Jun 28 07:21:51 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t20/gdbme.cc (main): Move variable initialization for AIX to
        get the expected next to inheritance3.

Sun Jun 27 12:29:53 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t00/teststrategy.exp: Remove expected failure for mips-*-*
        now that gcc-2.4 gets it right.

Fri Jun 25 12:00:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test.

        * gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of
        generating comp-info.exp which works for cross-compilation.

Thu Jun 24 16:55:05 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t11/list.exp:  For SVR4 xfails, match "*-*-sysv4*", not
        "*-*-sysv4.*".

Tue Jun 22 21:17:26 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t01/run.exp:  Start with a fresh gdb.
        * gdb.t11/list.exp:  For SVR4 xfails, match on all versions of
        SVR4.x.

Mon Jun 21 15:23:22 1993  Fred Fish  (fnf@cygnus.com)

        * {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07,
        gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15,
        gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/
        Makefile.in (distclean, realclean):  Remove gdbme.c from list of
        things to remove.

Sat Jun 19 07:49:10 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t24/demangle.exp (test_gnu_style_demangling):  Add some new
        test cases from bug reports.

Fri Jun 18 10:38:49 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t06/break.exp:  Add xfails for sparc-sun-solaris2.*.
        * gdb.t12/scope.exp:  Add clear_xfails at appropriate places to
          avoid spurious xfails.
        * gdb.t20/classes.exp:  Add xfails for longstanding C++ problems.
        * gdb.t21/cplusfuncs.exp:  Add xfails for sparc-sun-solaris2.*.
        * gdb.t22/virtfunc.exp:  Add xfails for longstanding C++ problems.

Wed Jun 16 10:11:57 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/teststrategy.exp:  Rework to provide more useful
        description of each test, fix problem with systems that define
        ALIGN_STACK_ON_STARTUP code, other misc cleanups.
        * gdb.t06/break.exp (test_next_with_recursion):  Fix expected
        results for "next over recursive call" so timeouts aren't taken
        by error.

Mon Jun 14 09:09:04 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.t12/scope.exp: Test printing of variables before run.

        * gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are
        printed in wrong order due to sorting.

Sat Jun 12 15:03:58 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/teststrategy.exp:  Fix expected results for printing
        user entered string constant.  Is array of char, prints with no
        address.

        * gdb.t00/{default.exp, help.exp}:  Account for changes to radix
        commands.
        * gdb.t16/gdbme.c:  Add and use struct containing arrays of char.
        * gdb.t16/printcmds.exp:  Fix all lines that match "unsigned char *".
        * gdb.t16/printcmds.exp (test_print_char_arrays):  Test printing
        of struct of char arrays.
        * gdb.t00/radix.exp:  New tests for radix commands.

Fri Jun 11 13:12:27 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.t16/printcmd.exp: Print a variable before running program
        (with xfail for AIX).

Thu Jun 10 11:04:04 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.t06/{signals.exp,signals.c,Makefile.in}: New test.

        * gdb.t16/printcmd.exp: Don't print variables before running program.

        * gdb.t06/break.exp: Don't require envp argument to main.

        * gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword.

        * gdb.t02/whatis.exp, gdb.t11/list.exp:
        Add xfails for rs6000.

        * gdb.t02/whatis.exp: Change other tests not to re-test something
        we already tested.

        * gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure
        each type used has a variable of that type.

Tue Jun  8 16:45:20 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)

        * gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure.

Fri Jun  4 11:07:19 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

        * configure.in: change srctrigger to be a file, not a directory

Fri Jun  4 08:23:57 1993  Ian Lance Taylor  (ian@cygnus.com)

        * configure.in (mips-idt-ecoff*): Added trailing '*'.

        * gdb.t11/list.exp: Fixed a couple of typos.

Tue Jun  1 21:28:06 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00 (teststrategy.exp):  Remove notice about PR 1823.  Bug
        is fixed and PR is closed.
        * gdb.t16 (gdbme.c):  Add simple test string variable.
        * gdb.t16 (printcmds.exp):  Add tests with simple test string
        variable, primarily for boundaries on "set print elements".

Mon May 31 11:36:08 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.stabs/wierd.exp: Remove xfail for printing big integer.
        Make leading 0's optional and don't expect a tab in the middle
        of the number.

        * gdb.t00/teststrategy.exp: Remove xgdb before trying the copy.

        * gdb.stabs/wierd.def: Type attributes must be preceded by number=.
        * gdb.stabs/wierd.exp: Remove xfails for type attributes.  Also
        don't end command passed to gdb_test with newline.

        * gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the
        signed keyword away, don't expect signed bitfields to be signed.

        * gdb.t13/bitfields.exp (bitfield containment): Accept the fields
        printing with only as many 1's as are in the field as well as printing
        with 32 1's (see comment).

Sat May 29 17:57:01 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/default.exp:  Start with a fresh gdb.
        * configure.in (configdirs):  Remove gdb.t31 until the chill
        compiler works again.  It no longer is able to find chillrt0
        since it isn't in libchill.a anymore.
        * gdb.stabs/wierd.exp:  Rewrite to properly handling a missing
        wierd.o, make more modular.
        * gdb.stabs/wierd.def (bad_neg0type, bad_neg0const):  Remove
        spurious newlines that caused problems.

Wed May 26 09:57:19 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * Move test with enums and partial symbols from gdb.t03/ptype.exp
        to gdb.stabs/wierd.exp since GCC has worked around the bug.
        gdb.stabs/wierd.{exp,def}: Many new tests.

        * gdb.t00/default.exp: update info line for new message.

        * gdb.t02/{whatis.exp,gdbme.c}:
        Test that "char *" doesn't print as "caddr_t".

Tue May 25 13:28:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t00/help.exp: Use .* in place of some help messages which
        just changed.
        gdb.t00/default.exp: Update "info frame" test for new message.
        * gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test.
        Remove some xfails

Mon May 24 00:24:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * gdb.t03/{gdbme.c,ptype.exp}:
        Add tests for typedef'd struct and union without tags.
        Also check "whatis" on a variable of a typedef'd enum without a tag.

        * gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see
        PRMS 1823; the bug still exists but isn't reproduced by this test
        anymore), and remove rs6000 XFAIL (the bug is fixed).

        * gdb.t03/ptype.exp: Comment out a lot of tests which are basically
        duplicated from whatis.exp.  For those that are left, accept
        "long", "long int", or "int" for long variables (whatis.exp already
        has an XFAIL for "int", so no need to fail it here).

        * gdb.t02/whatis.exp, gdb.t10/crossload.exp:
        Deal with GCC's names for types now that GDB uses the compiler's names.

        * gdb.t02/{Makefile.in,gdbme.c,whatis.exp}:  If not GCC, do some
        setup_xfail's for sunos4.  If we #defined the signed keyword away,
        don't expect GDB to know that char it is signed.

        * gdb.t00/teststrategy.exp: Update for symbolic signal names.

Sun May 23 08:44:55 1993  Fred Fish  (fnf@cygnus.com)

        * configure.in (configdirs):  Add gdb.t24 for C++ tests that
        should work on any system, regardless of debugging format.
        * gdb.t21/demangle.exp:  Move to gdb.t24.
        * gdb.t24/demangle.exp:  Move from gdb.t21.
        * gdb.t24/{Makefile.in, configure.in}:  New files.

Thu May 20 19:39:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * configure.in: Do gdb.stabs and C++ tests only for stabs.
        * gdb.stabs: New directory.

Tue May 18 21:12:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)

        * config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?"
        not just "Quit anyway?".

Tue May 18 17:13:20 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t21/demangle.exp:  Add a couple of new patterns.  Ensure
        that all setup_xfails are immediately followed by clear_xfails.

Tue May 11 09:10:47 1993  Fred Fish  (fnf@cygnus.com)

        * config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp,
        gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp,
        gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp,
        gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp,
        gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp,
        gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
        gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
        gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp,
        gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp,
        gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp,
        gdb.t31/chillvars.exp, lib/gdb.exp:
        Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to
        bug-gdb@prep.ai.mit.edu.

Fri May  7 09:15:35 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t17/callfuncs.exp (do_function_calls):  Call t_double_values
        with 0.0, not integer 0.

Fri Apr 30 13:17:24 1993  Jim Kingdon  (kingdon@cygnus.com)

        * gdb.t06/break.exp: Update for "Kill the program" message change.

Fri Apr 30 09:42:57 1993  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (GDBFLAGS):  Set to -nx.
        * Makefile.in (site.exp):  Use GDBFLAGS.

Wed Apr 28 13:19:07 1993  K. Richard Pixley  (rich@rtl.cygnus.com)

        * */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory
          Makefiles.
          (check): depend on just-check.
          (just-check): added so that tests can be run without a noop
          build pass.

Fri Apr 23 18:13:28 1993  K. Richard Pixley  (rich@rtl.cygnus.com)

        Switch to using configure's configdirs.
        * Makefile.in (Makefile): add configure.in dependency.
          (SUBDIRS): removed redundant assignment.
        * configure.in: switch subdirs assignment to configdirs.
        * gdb.t*/configure.in: new files.

Thu Apr 22 08:27:53 1993  Ian Lance Taylor  (ian@cygnus.com)

        * gdb.t07/watchpoint.exp: Removed a29k expected failure which now
        works.

Tue Apr 20 13:38:40 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.{t20,t21,t22,t23}/Makefile.in:  Use $(srcdir) to avoid $<
        in explicit rules.  Apparently this is not supported by some makes.

Mon Apr 19 01:54:53 1993  John Gilmore  (gnu@cygnus.com)

        * gdb.t31/Makefile.in:  Use $(srcdir) when avoiding $<, sigh.

Fri Apr 16 09:33:46 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/unix-gdb.exp:  Add back missing return 0 which mysteriously
        disappeared.

Thu Apr 15 02:28:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)

        * gdb.t31/Makefile.in:  Avoid $< in explicit rule.

Wed Apr 14 16:38:47 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t07/watchpoint.exp:  Remove setup_xfail for i486
        watchpoint problem that is now fixed.
        * gdb.t30/chexp.exp:  Remove setup_xfail for printing
        uninitialized convenience variables.
        * gdb.t31/chillvars.exp:  Fix expected patterns for printing
        structures.

Wed Apr 14 12:55:58 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS
        which causes expect to get out of sync with gdb on long output
        from help set.
        * gdb.t09/corefile.exp: Make expected pattern for core file
        failing signal and frame output format less sun specific.

Tue Apr 13 23:18:07 1993  Per Bothner  (bothner@cygnus.com)

        * gdb.t31/chillvars.exp:  Add and remove initial dummy
        breakpoint, so that symbol table is forced in.
        (Needed at least on Sunos4, though it seems not SVR4.)
        * gdb.t31/chillvars.exp:  Update for changed output format.

Sun Apr 11 17:21:45 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path.

Wed Apr  7 21:28:21 1993  Rob Savoye  (rob@cygnus.com)

        * Makefile.in: Added --srcdir when invoking runtest, removed the
        need for a local config file. (optional now)

Wed Apr  7 14:13:41 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t21/demangle.exp:  Only count real fails (not xfails) for
        failure count used to force early termination.  Add some more
        expected failures for gnu style demangling.

Thu Apr  1 09:50:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the
        pmi variable from gdb.t20/gdbme to get optimized away.
        * gdb.t00/teststrategy.exp: Added expected failure for mips-*-*.
        Check for written corefile upon timeout _and_ eof.

Tue Mar 30 09:58:16 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * config/unix-gdb.exp:  Add missing return 0.

Tue Mar 30 08:34:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)

        * gdb.t16/printcmds.exp:  Remove misplaced xfail that caused an early
        test termination.

Mon Mar 29 17:37:25 1993  Fred Fish  (fnf@cygnus.com)

        * configure.in (subdirs):  Put back gdb.t17 which mysteriously
        disappeared.

Thu Mar 25 21:05:16 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t10/crossload.exp:  Disable the i860-elf test until such
        time as i860 support works.

        * gdb.t15/funcargs.exp:  Fix expected outputs to include 
        "backtrace 100\r" rather than just "backtrace\r", to match last
        change.

Thu Mar 25 12:14:28 1993  Ian Lance Taylor  (ian@cygnus.com)

        * config/udi-gdb.exp (gdb_exit): Remove close command.
        (gdb_target_udi): New procedure to set the UDI target.
        (gdb_start): Don't remove *_soc files.  Use gdb_target_udi.
        * gdb.t00/default.exp: Added expected failures for a29k-*-udi.
        Added waits for prompts after several question responses.  Added
        some more responses used by a29k-amd-udi-gdb.
        * gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
        pass different arguments, restart UDI connection after program
        completion.
        * gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
        gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
        gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
        gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
        * gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
        gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
        gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
        gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
        gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
        after program completion.
        * gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
        compiled with a SELECT_VECS setting.
        * gdb.t15/funcargs.exp: Use argument to backtrace to prevent
        infinite recursion.

        * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
        Added checks for COFF results, and made them expected failures for
        all targets.  It would be better to make them expected failures
        for COFF targets only.

Wed Mar 24 14:43:38 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)

        * Makefile.in: add null dvi target, don't bother to recurse
        through test directories for info and install-info; rename
        $(datadir) to be dejagnu instead of deja-gnu

Wed Mar 24 09:48:03 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t31/gdbme.ch:  Re-enable code that previously caused
        compiler to coredump.
        * gdb.t31/chillvars.exp:  Re-enable tests that depend on that
        code.

Tue Mar 23 08:53:42 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t31/gdbme.ch:  Comment out code that causes chill compiler
        coredump.
        * gdb.t31/chillvars.exp:  Comment out tests that depend on that
        code.

Sun Mar 21 17:56:47 1993  Rob Savoye  (rob at darkstar.cygnus.com)

        * gdb.t03/ptype.exp: tests for return code from gdb_test.
        * gdb.t00/teststrategy.exp: Uses which proc rather than spawning
        which in a shell. Deletes xgdb when done.
        * config/unix-gdb.exp: Won't try to spawn $GDB unless it exists.
        Tests the return from the "set height" or "set width" commands.
        Added a few return codes where needed.

Wed Mar 17 11:31:01 1993  Fred Fish  (fnf@cygnus.com)

        * Makefile.in (SUBDIRS):  Add gdb.t17.
        * configure.in (subdirs):  Add gdb.t17.
        * gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}:  New test
        files to test gdb's calling of functions in the inferior with
        the correct arguments and gdb's ability to retrieve any
        result returned.

Tue Mar 16 15:37:11 1993  Fred Fish  (fnf@cygnus.com)

        * config/unix-gdb.exp (gdb_exit):  Remove close commands that
        may be called after gdb goes away.  Previous versions of expect
        needed these to avoid file descriptor leaks, but they cause
        errors with the current revision of expect.
        * gdb.t00/gdbvars.exp:  Use -re on expected output after
        setting sevenbit-strings.
        * gdb.t04/setvar.exp, gdb.t13/bitfields.exp:  Make commands
        to set sevenbit-strings consistent across tests.
        gdb.t30/chexp.exp, gdb.t31/chillvars.exp:  Make commands to
        set sevenbit-strings consistent across tests.

Fri Mar 12 08:47:20 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t21/demangle.exp (proc demangle):  Adjust quotes in an
        expected output to match current "expect" expectations.

Wed Mar 10 18:01:49 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/default.exp:  Change expected output for default "source"
        command, to match new gdb behavior which requires a filename to
        source.

Tue Mar  9 11:00:56 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t07/watchpoint.exp (test_simple_watchpoint):  Set up
        expected fail for i486-*-* that misses the marker2 function.
        * gdb.t10/crossload.exp (bfddefault):  Allow successful
        recognition of a format to pass even if no symbols are found.
        Explicitly catch failures where the format is not recognized
        or is ambiguous, and add the reason to the fail message.
        * gdb.t10/crossload.exp (bfdexplicit):  Catch failure where
        the cause is and invalid target and add reason to failure message.
        * gdb.t10/crossload.exp:  Fix bfd target names for elf32-m68k,
        elf32-i386, elf32-sparc, and elf32-i860.
        * gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
        Set up expected failure for 'filename'::variable scope resolution,
        which is now apparently broken on all targets.
        * gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
        gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
        gdb.t23/templates.exp:   Change failure for missing binfile into
        just a warning.
        gdb.t21/demangle.exp:  Change all cfront references to 'arm'
        references.

Mon Mar  8 19:20:28 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/default.exp:  Add expected output for default "source"
        command, to match new gdb behavior.
        * gdb.t09/corefile.exp:  Use GDBFLAGS when spawning GDB.

Sun Mar  7 15:14:09 1993  Rob Savoye  (rob@cygnus.com)

        * config/*-gdb.exp: returns an error, rather than exiting on
        internal errors.

Tue Mar  2 18:09:32 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t03/gdbme.c:  Add pointer to struct variable.
        * gdb.t03/ptype.exp:  Test equivalence of '.' and '->' for
        referencing struct members.

Thu Feb 25 10:39:06 1993  Ian Lance Taylor  (ian@cygnus.com)

        * configure.in (mips-idt-ecoff): New target.
        * config/mips-gdb.exp: New file for remote board using MIPS remote
        debugging protocol.

        * Redid configuration scheme.  Removed gdb.t*/configure.in.
        Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*.  Changed to use CC, CXX
        instead of CC_FOR_TARGET, CXX_FOR_TARGET.  Added mostlyclean and
        distclean targets.  Built executables via .o files.  Adjusted
        tests to account for source files in $(srcdir) rather than
        $(objdir).
        * lib/gdb.exp (runto): Don't expect () after the function name,
        because it may have arguments.

Wed Feb 24 08:05:38 1993  Ian Lance Taylor  (ian@cygnus.com)

        * gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp,
        gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
        expected failures for mips-idt-* and mips-sgi-*.
        * gdb.t00/default.exp (attach): Kill process if requested.
        * gdb.t00/help.exp (help target core, help target): Accept a gdb
        that does not read core files.
        * gdb.t01/run.exp: Removed checks for exit status code.
        * gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
        it is linked in.
        * gdb.t03/ptype.exp: Increase timeout when calling malloc.
        * gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
        appropriate, rather than doing it by hand.
        * gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
        execution.
        * gdb.t10/crossload.exp: Kill existing program if needed.
        * gdb.t15/funcargs.exp: Use delete_breakpoints function where
        appropriate, rather than doing it by hand.  Always increase
        timeout for this test, not just for VxWorks.

Wed Feb 24 08:03:38 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t31/chillvars.exp (test_structs):  New proc to test printing
        of Chill STRUCT types and STRUCT values.
        * gdb.t31/chillvars.exp (test_strings):  Expect "CHAR" now, rather
        than "char".
        * gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
        struct2):  New struct definitions and initializations to test 
        simple Chill STRUCT types.

Tue Feb 23 11:55:06 1993  Fred Fish  (fnf@cygnus.com)

        * gdb.t00/teststrategy.exp:  Track reversion in gdb to not print
        the null byte at the end of strings.
        * gdb.t00/default.exp:  Make show version insensitive to copyright
        date.
        * gdb.t16/in-gdbme.c (ctable1, ctable2):  Make explicitly unsigned
        to avoid dependencies on target char signedness.
        * gdb.t16/printcmds.exp:  Update expected results for explicitly
        unsigned char.
        * gdb.t16/printcmds.exp:  Remove setup_xfails for i960 that should
        now work.
        * gdb.t21/demangle.exp:  Add many more patterns for template
        demangling, most of them being expected failures.
        * gdb.t21/demangle.exp (proc demangle):  Quote the demangled
        string we are matching for, to match on the whole string.
        * gdb.t21/demangle.exp:  Add many new test strings to demangle,
        and fix a whole bunch that had incorrect expected output but were
        passing anyway because of the bug in "proc demangle".
        * gdb.t31/chillvars.exp:  Remove setup_xfail for printing string
        type.
        * gdb.t31/in-gdbme.ch:  Uncomment string4, now compiles.

Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * gdb/testsuite: made modifications to testcases, etc., to allow
        them to work properly  given the reorganization of deja-gnu and the
        relocation of the testcases from deja-gnu to a "tool" subdirectory.

Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)

        * gdb/testsuite: Initial creation of gdb/testsuite.
        Migrated dejagnu testcases and support files for testing nm to
        gdb/testsuite from deja-gnu.  These files were moved "as is"
        with no modifications.  This migration is part of a major overhaul
        of dejagnu.  The modifications to these testcases, etc., which
        will allow them to work with the new version of dejagnu will be
        made in a future update.
\f
Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End: