1 # Copyright 1998-2001, 2004, 2007-2012 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
16 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
20 set testfile "call-ar-st"
21 set srcfile ${testfile}.c
22 set binfile ${objdir}/${subdir}/${testfile}
24 # Test depends on printf, which the sparclet stub doesn't support.
25 if { [istarget "sparclet-*-*"] } {
29 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
30 untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
35 # Create and source the file that provides information about the compiler
36 # used to compile the test case.
38 if [get_compiler_info] {
42 # Some targets can't call functions, so don't even bother with this
44 if [target_info exists gdb,cannot_call_functions] {
45 setup_xfail "*-*-*" 2416
46 fail "This target can not call functions"
50 set oldtimeout $timeout
51 set timeout [expr "$timeout + 60"]
53 # Start with a fresh gdb.
57 gdb_reinitialize_dir $srcdir/$subdir
59 gdb_test_no_output "set print sevenbit-strings"
60 gdb_test_no_output "set print address off"
61 gdb_test_no_output "set width 0"
64 if ![runto_main] then {
65 perror "couldn't run to breakpoint"
72 gdb_test "tbreak 1209" \
73 "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
74 "tbreakpoint line 1209"
77 "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
78 "run until breakpoint set at a line"
81 #call print_double_array(double_array)
82 if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
83 ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
84 gdb_test_sequence "print print_double_array(double_array)" "" {
85 "\[ \t\r\n\]+array_d :"
86 "\[ \t\r\n\]+========="
87 "\[ \t\r\n\]+0.000000"
88 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"
93 #call print_char_array(char_array)
95 if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
96 gdb_test_sequence "print print_char_array(char_array)" "" {
97 "\[ \t\r\n\]+array_c :"
98 "\[ \t\r\n\]+========="
99 "\[ \t\r\n\]+\[ \t\r\n\]+Z"
100 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
101 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
102 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
107 gdb_test "tbreak 1216" \
108 "Temporary breakpoint.*file.*$srcfile, line 1216.*" \
109 "tbreakpoint line 1216"
111 if ![gdb_skip_stdio_test "continue to 1216"] {
112 gdb_test_sequence "continue" "continue to 1216" {
113 "\[ \t\r\n\]+array_c :"
114 "\[ \t\r\n\]+========="
115 "\[ \t\r\n\]+\[ \t\r\n\]+Z"
116 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
117 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
118 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
119 "\[ \t\r\n\]+main.*at.*:1216"
120 "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
123 gdb_test "continue" ".*" ""
126 # I am disabling this test, because it takes too long. I verified by
127 # hand that it works, feel free to check for yourself.
128 #call print_all_arrays(integer_array, char_array, float_array, double_array)
129 #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
131 # -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" {
132 # pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
134 # -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
135 # timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
138 #set timeout $oldtimeout
140 gdb_test "tbreak 1220" \
141 "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
142 "tbreakpoint line 1220"
144 if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
145 ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
146 gdb_test_sequence "continue" "continuing to breakpoint 1220" {
148 "\[ \t\r\n\]+array_d :"
149 "\[ \t\r\n\]+========="
150 "\[ \t\r\n\]+0.000000"
151 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
154 "student id :\[\t \]+.*YELLOW"
156 "main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
159 gdb_test "continue" ".*" ""
164 "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \
165 "step inside print_all_arrays"
168 if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
170 "array_i :.*307.*print_char_array.*" \
171 "next over print_int_array in print-all_arrays"
173 gdb_test "next" ".*" ""
176 #call print_double_array(array_d)
177 if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
178 ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
179 gdb_test_sequence "print print_double_array(array_d)" "" {
181 "\[ \t\r\n\]+========="
182 "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
183 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
189 gdb_test "tbreak 1236" \
190 "Temporary breakpoint.* file .*$srcfile, line 1236.*" \
191 "tbreakpoint line 1236"
193 if {![gdb_skip_float_test "continuing to 1236"] && \
194 ![gdb_skip_stdio_test "continuing to 1236"] } {
195 gdb_test_sequence "continue" "continuing to 1236" {
196 "Continuing\\..*array_c"
198 "\[ \t\r\n\]+array_d :"
199 "\[ \t\r\n\]+========="
200 "\[ \t\r\n\]+0.000000"
201 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
202 "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
205 gdb_test "continue" ".*" ""
209 #call sum_array_print(10, *list1, *list2, *list3, *list4)
211 if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
212 gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
213 ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \
214 "print sum_array_print(10, *list1, *list2, *list3, *list4)"
218 if ![gdb_skip_stdio_test "next to 1237"] {
220 "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
223 gdb_test "next" ".*" ""
226 #call print_array_rep(\*list1, \*list2, \*list3)
228 if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
229 gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \
230 "Contents of linked list3:.*" \
231 "print print_array_rep(*list1, *list2, *list3)"
235 gdb_test "tbreak 1241" \
236 "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
237 "tbreakpoint line 1241"
239 gdb_test "continue" \
240 "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
244 # Run into sum_array_print, and verify that the arguments were passed
247 # Note that we shouldn't use a `step' here to get into
248 # sum_array_print; GCC may emit calls to memcpy to put the arguments
249 # in the right place, and a step may end up in memcpy instead. This
250 # may itself be a bug, but it's not the one we're trying to catch
251 # here. I've added something to step-test.exp for this.
252 gdb_test "break sum_array_print" \
253 ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
254 "set breakpoint in sum_array_print"
255 gdb_test_no_output "set print frame-arguments all"
256 gdb_test "continue" \
257 ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
258 "check args of sum_array_print"
260 #call print_array_rep(linked_list1, linked_list2, linked_list3)
261 # this calls works from gdb without gdb_expect. But it does seem to hang
262 #from within gdb_expect.
264 #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
266 # -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
267 # pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
269 # -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
270 # timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
275 gdb_test "tbreak 1281" \
276 "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
277 "tbreakpoint line 1281"
279 if ![gdb_skip_stdio_test "continuing to 1281"] {
280 gdb_test "continue" \
281 "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \
284 gdb_test "continue" ".*" ""
287 #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
288 # *flags, *flags_combo, *three_char, *five_char,
289 # *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
291 if {![gdb_skip_float_test "print print_small_structs(...)"] && \
292 ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
293 gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" {
296 "\[\t\r\n \]+epsilon"
299 "\[\t\r\n \]+epsilon"
300 "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
301 "\[\t\r\n \]+Contents of three_char_t:"
302 "\[\t\r\n \]+a[ \t]*b[ \t]*c"
303 "\[\t\r\n \]+Contents of five_char_t:"
304 "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
305 "\[\t\r\n \]+Contents of int_char_combo_t:"
306 "\[\t\r\n \]+123[ \t]*z"
307 "\[\t\r\n \]+Sum of the 4 struct values and seed :"
309 "\[\t\r\n \]+Contents of struct1:"
310 "\[\t\r\n \]+6[ \t]*0"
311 "\[\t\r\n \]+Contents of struct2:"
312 "\[\t\r\n \]+10[ \t]*0"
313 "\[\t\r\n \]+Contents of struct3:"
314 "\[\t\r\n \]+12[ \t]*0"
315 "\[\t\r\n \]+Contents of one_double_t:"
316 "\[\t\r\n \]+10.500000"
317 "\[\t\r\n \]+Contents of one_double_t:"
318 "\[\t\r\n \]+-3.375000"
319 "\[\t\r\n \]+Contents of one_double_t:"
320 "\[\t\r\n \]+675.093750"
321 "\[\t\r\n \]+Contents of two_floats_t:"
322 "\[\t\r\n \]+45.234001[ \t]*43.599998"
323 "\[\t\r\n \]+Contents of two_floats_t:"
324 "\[\t\r\n \]+78.010002[ \t]*122.099998"
325 "\[\t\r\n \]+Contents of two_floats_t:"
326 "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
330 #call compute_with_small_structs(20)
331 gdb_test "print compute_with_small_structs(20)" \
333 "print compute_with_small_structs(20)"
336 #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
337 # 3.14, -5678.12345, -0.11111111, 216.97065)
339 if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
340 ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
341 gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" {
342 "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
343 "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
344 "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
345 "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
346 "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
351 gdb_test "tbreak 1286" \
352 "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
353 "tbreakpoint line 1286"
355 gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
357 if { [istarget "hppa*-*-hpux*"] } {
360 # the aCC demangler cannot demangle the name of a function with >10 args.
361 # so I added a .* after the name of the function, to match the
362 # incredibly long mangled name
363 # (getting aCC's libdemangle.a bundled w/ the system?)
364 # DTS CLLbs16994 coulter 990114
366 # FIXME: use step for hppa* testing for now
370 "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \
371 "step into print_long_arg_list"
374 # We can't just assume that a "step" will get us into
375 # print_long_arg_list here,either.
376 gdb_test "tbreak print_long_arg_list" \
377 "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
378 "tbreak in print_long_arg_list after stepping into memcpy"
379 # The short match case below handles cases where a buffer
380 # overflows or something, and expect can't deal with the full
381 # line. Perhaps a more elegant solution exists... -sts 1999-08-17
382 if {![gdb_skip_float_test "step into print_long_arg_list"]} {
383 gdb_test_multiple "continue" "step into print_long_arg_list" {
384 -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
385 pass "step into print_long_arg_list"
387 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
388 pass "step into print_long_arg_list (short match)"
392 # If skipping float tests, don't expect anything in arg list.
393 gdb_test "continue" \
394 "print_long_arg_list \\(.*\\).*" \
395 "step into print_long_arg_list"
399 set ws "\[\n\r\t \]+"
401 #call print_small_structs(struct1, struct2, struct3, struct4, flags,
402 # flags_combo, three_char, five_char, int_char_combo,
403 # d1, d2, d3, f1, f2, f3)
405 if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
406 ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
408 # On 32-bit SPARC, some of the args are passed by ref, others by
409 # value, and GDB gets confused and says "Invalid cast" because it
410 # thinks it has to cast the structure into a pointer to structure.
411 if { [test_debug_format "stabs"] } then {
412 setup_kfail "gdb/1539" "sparc-*-*"
415 gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" {
418 "\[\t\r\n \]+epsilon"
421 "\[\t\r\n \]+epsilon"
422 "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
423 "\[\t\r\n \]+Contents of three_char_t:"
424 "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
425 "\[\t\r\n \]+Contents of five_char_t:"
426 "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
427 "\[\t\r\n \]+Contents of int_char_combo_t:"
428 "\[\t\r\n \]+123\[ \t\]*z"
429 "\[\t\r\n \]+Sum of the 4 struct values and seed :"
431 "\[\t\r\n \]+Contents of struct1:"
432 "\[\t\r\n \]+6\[ \t\]*0"
433 "\[\t\r\n \]+Contents of struct2:"
434 "\[\t\r\n \]+10\[ \t\]*0"
435 "\[\t\r\n \]+Contents of struct3:"
436 "\[\t\r\n \]+12\[ \t\]*0"
437 "\[\t\r\n \]+Contents of one_double_t:"
438 "\[\t\r\n \]+10.500000"
439 "\[\t\r\n \]+Contents of one_double_t:"
440 "\[\t\r\n \]+-3.375000"
441 "\[\t\r\n \]+Contents of one_double_t:"
442 "\[\t\r\n \]+675.093750"
443 "\[\t\r\n \]+Contents of two_floats_t:"
444 "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
445 "\[\t\r\n \]+Contents of two_floats_t:"
446 "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
447 "\[\t\r\n \]+Contents of two_floats_t:"
448 "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
454 gdb_test "tbreak 1300" \
455 "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
456 "tbreakpoint line 1300"
458 if ![gdb_skip_stdio_test "continuing to 1300"] {
459 gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
462 gdb_test "continue" ".*" ""
467 "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \
468 "step into init_bit_flags_combo"
470 #call print_bit_flags_combo(*bit_flags_combo)
471 if ![gdb_skip_stdio_test "continuing to 1300"] {
472 gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \
473 "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \
474 "print print_bit_flags_combo from init_bit_flags_combo"
479 gdb_test "tbreak 1305" \
480 "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
481 "tbreakpoint line 1305"
483 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
486 #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
489 # HP aCC demangler currently does not handle hp aCC functions with >10 args
490 # DTS CLLbs16994 coulter 990114
492 if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
494 if {![gdb_skip_float_test "print print_long_arg_list"] && \
495 ![gdb_skip_stdio_test "print print_long_arg_list"] } {
496 gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" {
497 "\[ \n\r\t\]+double : 22.250000"
498 "\[ \n\r\t\]+double : 33.375000"
499 "\[ \n\r\t\]+int : 0"
500 "\[ \n\r\t\]+int : -25"
501 "\[ \n\r\t\]+int : 100"
502 "\[ \n\r\t\]+int : 2345"
505 "\[ \n\r\t\]+epsilon"
506 "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
507 "\[ \n\r\t\]+Contents of three_char_t:"
508 "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
509 "\[ \n\r\t\]+Contents of five_char_t:"
510 "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
511 "\[ \n\r\t\]+Contents of int_char_combo_t:"
512 "\[ \n\r\t\]+123\[ \t\]+z"
513 "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
515 "\[ \n\r\t\]+Contents of struct1:"
516 "\[ \n\r\t\]+6\[ \t\]+0"
517 "\[ \n\r\t\]+Contents of struct2:"
518 "\[ \n\r\t\]+10\[ \t\]+0"
519 "\[ \n\r\t\]+Contents of struct3:"
520 "\[ \n\r\t\]+12\[ \t\]+0"
521 "\[ \n\r\t\]+Contents of one_double_t:"
522 "\[ \n\r\t\]+1.111110"
523 "\[ \n\r\t\]+Contents of one_double_t:"
524 "\[ \n\r\t\]+-345.340000"
525 "\[ \n\r\t\]+Contents of one_double_t:"
526 "\[ \n\r\t\]+546464.200000"
527 "\[ \n\r\t\]+Contents of two_floats_t:"
528 "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
529 "\[ \n\r\t\]+Contents of two_floats_t:"
530 "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
531 "\[ \n\r\t\]+Contents of two_floats_t:"
532 "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
538 gdb_test "tbreak 1311" \
539 "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
540 "tbreakpoint line 1311"
542 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
546 #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
547 if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
548 gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
549 "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \
550 "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
554 #call print_struct_rep(*struct1, *struct2, *struct3)
555 if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
556 gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \
557 "print print_struct_rep(*struct1, *struct2, *struct3)" {
558 "\[ \t\n\r\]+Contents of struct1:"
560 "\[ \t\n\r\]+Contents of struct2:"
562 "\[ \t\n\r\]+Contents of struct3:"
567 if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
568 gdb_test "print print_one_large_struct(*list1)" \
570 "print print_one_large_struct(*list1)"
573 set timeout $oldtimeout