gdb/testsuite/gdb.base/call-ar-st.exp

   1 #   Copyright 1998, 1999, 2000, 2001, 2004
   2 #   Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 2 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program; if not, write to the Free Software
  16 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  17
  18 # Please email any bugs, comments, and/or additions to this file to:
  19 # bug-gdb@prep.ai.mit.edu
  20
  21 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
  22
  23
  24 if $tracelevel then {
  25         strace $tracelevel
  26 }
  27
  28 set prms_id 0
  29 set bug_id 0
  30
  31 set testfile "call-ar-st"
  32 set srcfile ${testfile}.c
  33 set binfile ${objdir}/${subdir}/${testfile}
  34
  35 # Test depends on printf, which the sparclet stub doesn't support.
  36 if { [istarget "sparclet-*-*"] } {
  37     return 0;
  38 }
  39
  40 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
  41     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
  42 }
  43
  44
  45 # Create and source the file that provides information about the compiler
  46 # used to compile the test case.
  47
  48 if [get_compiler_info ${binfile}] {
  49     return -1;
  50 }
  51
  52 # Some targets can't call functions, so don't even bother with this
  53 # test.
  54 if [target_info exists gdb,cannot_call_functions] {
  55     setup_xfail "*-*-*" 2416
  56     fail "This target can not call functions"
  57     continue
  58 }
  59
  60 set oldtimeout $timeout
  61 set timeout [expr "$timeout + 60"]
  62
  63 # Set the current language to C.  This counts as a test.  If it
  64 # fails, then we skip the other tests.
  65
  66 proc set_lang_c {} {
  67     global gdb_prompt
  68
  69     send_gdb "set language c\n"
  70     gdb_expect {
  71         -re ".*$gdb_prompt $" {}
  72         timeout { fail "set language c (timeout)" ; return 0; }
  73     }
  74
  75     send_gdb "show language\n"
  76     gdb_expect {
  77         -re ".* source language is \"c\".*$gdb_prompt $" {
  78             pass "set language to \"c\""
  79             return 1
  80         }
  81         -re ".*$gdb_prompt $" {
  82             fail "setting language to \"c\""
  83             return 0
  84         }
  85         timeout {
  86             fail "can't show language (timeout)"
  87             return 0
  88         }
  89     }
  90 }
  91
  92 # Start with a fresh gdb.
  93
  94 gdb_exit
  95 gdb_start
  96 gdb_reinitialize_dir $srcdir/$subdir
  97 gdb_load ${binfile}
  98 send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
  99 send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
 100 send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
 101
 102
 103 if ![runto_main] then {
 104     perror "couldn't run to breakpoint"
 105     continue
 106 }
 107
 108 #go -until 1209
 109 gdb_test "tbreak 1209" \
 110     "Breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
 111     "tbreakpoint line 1209"
 112
 113 gdb_test continue \
 114 "Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
 115 "run until breakpoint set at a line"
 116
 117
 118 #call print_double_array(double_array)
 119 if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
 120     ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
 121   send_gdb "print print_double_array(double_array)\n"
 122   gdb_expect_list "print print_double_array(double_array)" ".*$gdb_prompt $" {
 123         "\[ \t\r\n\]+array_d :"
 124         "\[ \t\r\n\]+========="
 125         "\[ \t\r\n\]+0.000000"
 126         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]"
 127         "\[ \t\r\n\]+"
 128   }
 129 }
 130
 131 #call print_char_array(char_array)
 132
 133 if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
 134     send_gdb "print print_char_array(char_array)\n"
 135     gdb_expect_list "print print_char_array(char_array)" ".*$gdb_prompt $" {
 136         "\[ \t\r\n\]+array_c :"
 137         "\[ \t\r\n\]+========="
 138         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
 139         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 140         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 141         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
 142     }
 143 }
 144
 145
 146
 147
 148 #go -until 1216
 149 gdb_test "tbreak 1216" \
 150 "Breakpoint.*file.*$srcfile, line 1216.*" \
 151 "tbreakpoint line 1216"
 152
 153 if ![gdb_skip_stdio_test "continue to 1216"] {
 154     send_gdb "continue\n"
 155     gdb_expect_list "continue to 1216" ".*$gdb_prompt $" {
 156         "\[ \t\r\n\]+array_c :"
 157         "\[ \t\r\n\]+========="
 158         "\[ \t\r\n\]+\[ \t\r\n\]+Z"
 159         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 160         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
 161         "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
 162         "\[ \t\r\n\]+main.*at.*:1216"
 163         "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
 164     }
 165 } else {
 166     gdb_test "continue" "" ""
 167 }
 168
 169 # I am disabling this test, because it takes too long. I verified by
 170 # hand that it works, feel free to check for yourself.
 171 #call print_all_arrays(integer_array, char_array, float_array, double_array)
 172 #send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
 173 #gdb_expect {
 174 #    -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1  -2  -3  -4  -5  -6  -7  -8\[ \t\r\n\]+-9  -10  -11  -12  -13  -14  -15  -16\[ \t\r\n\]+-17  -18  -19  -20  -21  -22  -23  -24\[ \t\r\n\]+-25  -26  -27  -28  -29  -30  -31  -32\[ \t\r\n\]+-33  -34  -35  -36  -37  -38  -39  -40\[ \t\r\n\]+-41  -42  -43  -44  -45  -46  -47  -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450  0.284900  0.427350  0.569801  0.712251  0.854701  0.997151  1.139601\[ \t\r\n\]+1.282051  1.424501  1.566952  1.709402  1.851852  1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.41750  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300.*$gdb_prompt $" {
 175 #        pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
 176 #   }
 177 #    -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 178 #    timeout           { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
 179 #  }
 180
 181 #set timeout $oldtimeout
 182 #go -until 1220
 183 gdb_test "tbreak 1220" \
 184         "Breakpoint.* file .*$srcfile, line 1220.*" \
 185         "tbreakpoint line 1220"
 186
 187 if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
 188     ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
 189     send_gdb "continue\n"
 190     gdb_expect_list "continuing to breakpoint 1220" ".*$gdb_prompt $" {
 191         "Continuing\\."
 192         "\[ \t\r\n\]+array_d :"
 193         "\[ \t\r\n\]+========="
 194         "\[ \t\r\n\]+0.000000"
 195         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 196         "\[ \t\r\n\]+"
 197         ".*array_f :"
 198         ".*student id :\[\t \]+.*YELLOW"
 199         ".*array_i :"
 200         ".*main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
 201     }
 202 } else {
 203     gdb_test "continue" "" ""
 204 }
 205
 206 #step
 207 send_gdb "step\n"
 208 gdb_expect {
 209     -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
 210     -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
 211     timeout { fail "step inside print_all_arrays (timeout)" }
 212 }
 213
 214
 215 #step -over
 216 if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
 217     send_gdb "next\n"
 218     gdb_expect {
 219         -re "array_i :.*307.*print_char_array.*$gdb_prompt $" {
 220             pass "next over print_int_array in print-all_arrays"
 221         }
 222         -re ".*$gdb_prompt $" {
 223             fail "next over print_int_array in print-all_arrays"
 224         }
 225         timeout {
 226             fail "next over print_int_array in print-all_arrays (timeout)"
 227         }
 228     }
 229 } else {
 230     gdb_test "next" "" ""
 231 }
 232
 233 #call print_double_array(array_d)
 234 if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
 235     ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
 236     send_gdb "print print_double_array(array_d)\n"
 237     gdb_expect_list "print print_double_array(array_d)" ".*$gdb_prompt $" {
 238         "array_d :"
 239         "\[ \t\r\n\]+========="
 240         "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
 241         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 242         "\[ \t\r\n\]+"
 243     }
 244 }
 245
 246 #go -until 1236
 247 gdb_test "tbreak 1236" \
 248 "Breakpoint.* file .*$srcfile, line 1236.*" \
 249 "tbreakpoint line 1236"
 250
 251 if {![gdb_skip_float_test "continuing to 1236"] && \
 252     ![gdb_skip_stdio_test "continuing to 1236"] } {
 253     send_gdb "continue\n"
 254     gdb_expect_list "continuing to 1236"  ".*$gdb_prompt $" {
 255         "Continuing\\..*array_c"
 256         ".*array_f"
 257         "\[ \t\r\n\]+array_d :"
 258         "\[ \t\r\n\]+========="
 259         "\[ \t\r\n\]+0.000000"
 260         "\[ \t\r\n\]+23.456\[0-9\]*  46.913\[0-9\]*  70.370\[0-9\]*  93.826\[0-9\]*  117.283\[0-9\]*  140.740\[0-9\]*  164.196\[0-9\]*  187.653\[0-9\]*"
 261         "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
 262     }
 263 } else {
 264     gdb_test "continue" "" ""
 265 }
 266
 267
 268 #call sum_array_print(10, *list1, *list2, *list3, *list4)
 269
 270 if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
 271     send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
 272     gdb_expect {
 273         -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
 274             pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
 275         }
 276         -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
 277         timeout           { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
 278     }
 279 }
 280
 281 #step over
 282 if ![gdb_skip_stdio_test "next to 1237"] {
 283     send_gdb "next\n"
 284     gdb_expect {
 285         -re ".*BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1237"}
 286         -re ".*$gdb_prompt $" { fail "next to 1237" }
 287         timeout { fail "next to 1237(timeout)" }
 288     }
 289 } else {
 290     gdb_test "next" "" ""
 291 }
 292
 293 #call print_array_rep(\*list1, \*list2, \*list3)
 294
 295 if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
 296     send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
 297     gdb_expect {
 298         -re ".*$gdb_prompt $" {
 299             pass "print print_array_rep(*list1, *list2, *list3)"
 300         }
 301         -re ".*$gdb_prompt $" {
 302             fail "print print_array_rep(*list1, *list2, *list3)"
 303         }
 304         timeout               {
 305             fail "(timeout) print print_array_rep(*list1, *list2, *list3)"
 306         }
 307     }
 308 }
 309
 310 #go -until 1241
 311 gdb_test "tbreak 1241" \
 312     "Breakpoint..* file .*$srcfile, line 1241.*" \
 313     "tbreakpoint line 1241"
 314
 315 send_gdb  "continue\n"
 316 gdb_expect {
 317  -re ".*main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" {
 318                    pass "continue to 1241"}
 319  -re ".*$gdb_prompt $" { fail "continue to 1241"}
 320  timeout           { fail "(timeout) continue to 1241"}
 321 }
 322
 323
 324
 325 # Run into sum_array_print, and verify that the arguments were passed
 326 # accurately.
 327 #
 328 # Note that we shouldn't use a `step' here to get into
 329 # sum_array_print; GCC may emit calls to memcpy to put the arguments
 330 # in the right place, and a step may end up in memcpy instead.  This
 331 # may itself be a bug, but it's not the one we're trying to catch
 332 # here.  I've added something to step-test.exp for this.
 333 gdb_test "break sum_array_print" \
 334         ".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
 335         "set breakpoint in sum_array_print"
 336 gdb_test "continue" \
 337         ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
 338         "check args of sum_array_print"
 339
 340 #call print_array_rep(linked_list1, linked_list2, linked_list3)
 341 # this calls works from gdb without gdb_expect. But it does seem to hang
 342 #from within gdb_expect.
 343 #I comment this out
 344 #send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
 345 #gdb_expect {
 346 #    -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
 347 #        pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
 348 #      }
 349 #    -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 350 #    timeout           { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
 351 #}
 352
 353
 354 #go -until 1281
 355 gdb_test "tbreak 1281" \
 356     "Breakpoint.* file .*call-ar-st.c, line 1281.*" \
 357     "tbreakpoint line 1281"
 358
 359 if ![gdb_skip_stdio_test "continuing to 1281"] {
 360     send_gdb "continue\n"
 361     gdb_expect {
 362         -re  "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*$gdb_prompt $" {
 363             pass "continue to 1281"
 364         }
 365         -re ".*$gdb_prompt $" { fail "continue to 1281"}
 366         timeout           { fail "(timeout) continue to 1281"}
 367     }
 368 } else {
 369     gdb_test "continue" "" ""
 370 }
 371
 372 #call print_small_structs(*struct1, *struct2, *struct3, *struct4,
 373 #                         *flags, *flags_combo, *three_char, *five_char,
 374 #                         *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 375
 376 if {![gdb_skip_float_test "print print_small_structs(...)"] && \
 377     ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
 378     send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
 379     gdb_expect_list "print print_small_structs" ".*$gdb_prompt $" {
 380         "\[\t\r\n \]+alpha"
 381         "\[\t\r\n \]+gamma"
 382         "\[\t\r\n \]+epsilon"
 383         "\[\t\r\n \]+alpha"
 384         "\[\t\r\n \]+gamma"
 385         "\[\t\r\n \]+epsilon"
 386         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 387         "\[\t\r\n \]+Contents of three_char_t:"
 388         "\[\t\r\n \]+a[ \t]*b[ \t]*c"
 389         "\[\t\r\n \]+Contents of five_char_t:"
 390         "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
 391         "\[\t\r\n \]+Contents of int_char_combo_t:"
 392         "\[\t\r\n \]+123[ \t]*z"
 393         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 394         "\[\t\r\n \]+52"
 395         "\[\t\r\n \]+Contents of struct1:"
 396         "\[\t\r\n \]+6[ \t]*0"
 397         "\[\t\r\n \]+Contents of struct2:"
 398         "\[\t\r\n \]+10[ \t]*0"
 399         "\[\t\r\n \]+Contents of struct3:"
 400         "\[\t\r\n \]+12[ \t]*0"
 401         "\[\t\r\n \]+Contents of one_double_t:"
 402         "\[\t\r\n \]+10.500000"
 403         "\[\t\r\n \]+Contents of one_double_t:"
 404         "\[\t\r\n \]+-3.375000"
 405         "\[\t\r\n \]+Contents of one_double_t:"
 406         "\[\t\r\n \]+675.093750"
 407         "\[\t\r\n \]+Contents of two_floats_t:"
 408         "\[\t\r\n \]+45.234001[ \t]*43.599998"
 409         "\[\t\r\n \]+Contents of two_floats_t:"
 410         "\[\t\r\n \]+78.010002[ \t]*122.099998"
 411         "\[\t\r\n \]+Contents of two_floats_t:"
 412         "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
 413     }
 414 }
 415
 416 #call compute_with_small_structs(20)
 417 send_gdb "print compute_with_small_structs(20)\n"
 418 gdb_expect {
 419     -re ".*\[0-9\]+ =.*$gdb_prompt $" {
 420         pass "print compute_with_small_structs(20)"
 421       }
 422     -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" }
 423     timeout           { fail "(timeout) compute_with_small_structs(20)" }
 424   }
 425
 426
 427 #call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
 428 #                       3.14, -5678.12345, -0.11111111, 216.97065)
 429
 430 if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
 431     ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
 432     send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
 433     gdb_expect_list "print print_ten_doubles" ".*$gdb_prompt $" {
 434         "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
 435         "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
 436         "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
 437         "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
 438         "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
 439     }
 440 }
 441
 442 #go -until 1286
 443 gdb_test "tbreak 1286" \
 444     "Breakpoint .* file .*call-ar-st.c, line 1286.*" \
 445     "tbreakpoint line 1286"
 446
 447 gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
 448
 449 if { [istarget "hppa*-*-hpux*"] } {
 450     #
 451     # NOTE:(FIXME)
 452     # the aCC demangler cannot demangle the name of a function with >10 args.
 453     # so I added a .* after the name of the function, to match the
 454     # incredibly long mangled name
 455     # (getting aCC's libdemangle.a bundled w/ the system?)
 456     # DTS CLLbs16994  coulter 990114
 457     #
 458     # FIXME: use step for hppa* testing for now
 459     # guo 990621
 460     #
 461     send_gdb "step\n"
 462     gdb_expect {
 463         -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"}
 464         -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
 465         timeout { fail "step into print_long_arg_list (timeout)" }
 466     }
 467 } else {
 468
 469     # We can't just assume that a "step" will get us into
 470     # print_long_arg_list here,either.
 471     gdb_test "tbreak print_long_arg_list" \
 472         "Breakpoint .* file .*call-ar-st.c, line .*" \
 473         "tbreak in print_long_arg_list after stepping into memcpy"
 474     # The short match case below handles cases where a buffer
 475     # overflows or something, and expect can't deal with the full
 476     # line.  Perhaps a more elegant solution exists... -sts 1999-08-17
 477     send_gdb "continue\n"
 478     if {![gdb_skip_float_test "step into print_long_arg_list"]} {
 479         gdb_expect {
 480             -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { pass "step into print_long_arg_list" }
 481             -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list (short match)"}
 482             -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
 483             timeout { fail "step into print_long_arg_list (timeout)" }
 484         }
 485     } else {
 486         # If skipping float tests, don't expect anything in arg list.
 487         gdb_expect {
 488             -re ".*print_long_arg_list \\(.*\\).*$gdb_prompt $" { pass "step into print_long_arg_list" }
 489             -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
 490             timeout { fail "step into print_long_arg_list (timeout)" }
 491         }
 492     }
 493 }
 494
 495 set ws "\[\n\r\t \]+"
 496
 497 #call print_small_structs(struct1, struct2, struct3, struct4, flags,
 498 #                         flags_combo, three_char, five_char, int_char_combo,
 499 #                         d1, d2, d3, f1, f2, f3)
 500
 501 if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
 502     ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
 503     # On Solaris, some of the args are passed by ref, others by value,
 504     # and GDB gets confused and says "Invalid cast" because it thinks
 505     # it has to cast the structure into a pointer to structure.  A real
 506     # GDB bug, probably for all Sparc configs, but obscure. -sts 1999-08-17.
 507     setup_xfail "sparc*-*-solaris*"
 508     send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n"
 509     gdb_expect_list "print print_small_structs from print_long_arg_list" ".*$gdb_prompt $" {
 510         "\[\t\r\n \]+alpha"
 511         "\[\t\r\n \]+gamma"
 512         "\[\t\r\n \]+epsilon"
 513         "\[\t\r\n \]+alpha"
 514         "\[\t\r\n \]+gamma"
 515         "\[\t\r\n \]+epsilon"
 516         "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
 517         "\[\t\r\n \]+Contents of three_char_t:"
 518         "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
 519         "\[\t\r\n \]+Contents of five_char_t:"
 520         "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
 521         "\[\t\r\n \]+Contents of int_char_combo_t:"
 522         "\[\t\r\n \]+123\[ \t\]*z"
 523         "\[\t\r\n \]+Sum of the 4 struct values and seed :"
 524         "\[\t\r\n \]+52"
 525         "\[\t\r\n \]+Contents of struct1:"
 526         "\[\t\r\n \]+6\[ \t\]*0"
 527         "\[\t\r\n \]+Contents of struct2:"
 528         "\[\t\r\n \]+10\[ \t\]*0"
 529         "\[\t\r\n \]+Contents of struct3:"
 530         "\[\t\r\n \]+12\[ \t\]*0"
 531         "\[\t\r\n \]+Contents of one_double_t:"
 532         "\[\t\r\n \]+10.500000"
 533         "\[\t\r\n \]+Contents of one_double_t:"
 534         "\[\t\r\n \]+-3.375000"
 535         "\[\t\r\n \]+Contents of one_double_t:"
 536         "\[\t\r\n \]+675.093750"
 537         "\[\t\r\n \]+Contents of two_floats_t:"
 538         "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
 539         "\[\t\r\n \]+Contents of two_floats_t:"
 540         "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
 541         "\[\t\r\n \]+Contents of two_floats_t:"
 542         "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
 543     }
 544 }
 545
 546
 547 #go -until 1300
 548 gdb_test "tbreak 1300" \
 549     "Breakpoint.* file .*call-ar-st.c, line 1300.*" \
 550     "tbreakpoint line 1300"
 551
 552 if ![gdb_skip_stdio_test "continuing to 1300"] {
 553     gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
 554             "continue to 1300"
 555 } else {
 556     gdb_test "continue" "" ""
 557 }
 558
 559 #step
 560     send_gdb "step\n"
 561     gdb_expect {
 562         -re "
 563 init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;.*$gdb_prompt $" {
 564                             pass "step into init_bit_flags_combo"}
 565         -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" }
 566         timeout { fail "step into init_bit_flags_combo (timeout)" }
 567     }
 568
 569 #call print_bit_flags_combo(*bit_flags_combo)
 570 if ![gdb_skip_stdio_test "continuing to 1300"] {
 571     send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
 572     gdb_expect {
 573         -re ".*alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*$gdb_prompt $" {
 574             pass "print print_bit_flags_combo from init_bit_flags_combo"
 575         }
 576         -re ".*$gdb_prompt $" {
 577             fail "print print_bit_flags_combo from init_bit_flags_combo"
 578         }
 579         timeout           {
 580             fail "(timeout) print_bit_flags_combo from init_bit_flags_combo"
 581         }
 582     }
 583 }
 584
 585
 586 #go -until 1305
 587 gdb_test "tbreak 1305" \
 588     "Breakpoint.* file .*call-ar-st.c, line 1305.*" \
 589     "tbreakpoint line 1305"
 590
 591 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
 592 "continue to 1305"
 593
 594 #call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
 595
 596 # FIXME:
 597 # HP aCC demangler currently does not handle hp aCC functions with >10 args
 598 # DTS CLLbs16994  coulter 990114
 599
 600 if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
 601
 602 if {![gdb_skip_float_test "print print_long_arg_list"] && \
 603     ![gdb_skip_stdio_test "print print_long_arg_list"] } {
 604     send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
 605     gdb_expect_list "print print_long_arg_list" ".*$gdb_prompt $" {
 606         "\[ \n\r\t\]+double : 22.250000"
 607         "\[ \n\r\t\]+double : 33.375000"
 608         "\[ \n\r\t\]+int : 0"
 609         "\[ \n\r\t\]+int : -25"
 610         "\[ \n\r\t\]+int : 100"
 611         "\[ \n\r\t\]+int : 2345"
 612         "\[ \n\r\t\]+alpha"
 613         "\[ \n\r\t\]+gamma"
 614         "\[ \n\r\t\]+epsilon"
 615         "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
 616         "\[ \n\r\t\]+Contents of three_char_t:"
 617         "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
 618         "\[ \n\r\t\]+Contents of five_char_t:"
 619         "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
 620         "\[ \n\r\t\]+Contents of int_char_combo_t:"
 621         "\[ \n\r\t\]+123\[ \t\]+z"
 622         "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
 623         "\[ \n\r\t\]+52"
 624         "\[ \n\r\t\]+Contents of struct1:"
 625         "\[ \n\r\t\]+6\[ \t\]+0"
 626         "\[ \n\r\t\]+Contents of struct2:"
 627         "\[ \n\r\t\]+10\[ \t\]+0"
 628         "\[ \n\r\t\]+Contents of struct3:"
 629         "\[ \n\r\t\]+12\[ \t\]+0"
 630         "\[ \n\r\t\]+Contents of one_double_t:"
 631         "\[ \n\r\t\]+1.111110"
 632         "\[ \n\r\t\]+Contents of one_double_t:"
 633         "\[ \n\r\t\]+-345.340000"
 634         "\[ \n\r\t\]+Contents of one_double_t:"
 635         "\[ \n\r\t\]+546464.200000"
 636         "\[ \n\r\t\]+Contents of two_floats_t:"
 637         "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
 638         "\[ \n\r\t\]+Contents of two_floats_t:"
 639         "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
 640         "\[ \n\r\t\]+Contents of two_floats_t:"
 641         "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
 642     }
 643 }
 644
 645
 646 #go -until 1311
 647 gdb_test "tbreak 1311" \
 648     "Breakpoint.* file .*call-ar-st.c, line 1311.*" \
 649     "tbreakpoint line 1311"
 650
 651 gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
 652 "continue to 1311"
 653
 654
 655 #call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
 656 if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
 657     send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
 658     gdb_expect {
 659         -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
 660             pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
 661         }
 662         -re ".*$gdb_prompt $" {
 663             fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
 664         }
 665         timeout           {
 666             fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
 667         }
 668     }
 669 }
 670
 671
 672 #call print_struct_rep(*struct1, *struct2, *struct3)
 673 if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
 674     send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
 675     gdb_expect_list "print print_struct_rep(*struct1, *struct2, *struct3)" \
 676             ".*$gdb_prompt $" {
 677         "\[ \t\n\r\]+Contents of struct1:"
 678         "\[ \t\n\r\]+        22         0"
 679         "\[ \t\n\r\]+Contents of struct2:"
 680         "\[ \t\n\r\]+        42         0"
 681         "\[ \t\n\r\]+Contents of struct3:"
 682         "\[ \t\n\r\]+        62         0"
 683     }
 684 }
 685
 686 if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
 687     send_gdb "print print_one_large_struct(*list1)\n"
 688     gdb_expect {
 689         -re ".*         4         1.*$gdb_prompt $" {
 690             pass "print print_one_large_struct(*list1)"
 691         }
 692         -re ".*$gdb_prompt $" {
 693             fail "print print_one_large_struct(*list1)"
 694         }
 695         timeout           {
 696             fail "(timeout) print_one_large_struct(*list1)"
 697         }
 698     }
 699 }
 700
 701 set timeout $oldtimeout
 702 return
 703